Using VMware
Workstation Player for
Windows
Modified on 21 DEC 2017
VMware Workstation Player for Windows 14.0
Using VMware Workstation Player for Windows
You can find the most up-to-date technical documentation on the VMware website at:
https://docs.vmware.com/
If you have comments about this documentation, submit your feedback to
docfeedback@vmware.com
VMware, Inc.
3401 Hillview Ave.
Palo Alto, CA 94304
www.vmware.com
Copyright © 2017 VMware, Inc. All rights reserved. Copyright and trademark information.
VMware, Inc.
2
Contents
Using VMware Workstation Player for Windows
7
1 Introduction and System Requirements 8
Host System Requirements for Workstation Player
Virtual Machine Features and Specifications
11
2 Installing and Using Workstation Player
13
Install Workstation Player on a Windows Host
Start Workstation Player
8
13
16
Use the Workstation Player Window
Transferring Files and Text
16
17
Download a Virtual Appliance in Workstation Player
19
Remove a Virtual Machine from the Library in Workstation Player
Email Address Collection in Workstation Player
Uninstall Workstation Player
19
19
20
3 Changing Workstation Player Preference Settings 21
Configuring Close Behavior Preference Settings
Configuring Virtual Printers on Windows Hosts
Configuring Software Updates Settings
21
22
22
Join or Leave the Customer Experience Improvement Program
24
4 Creating Virtual Machines in Workstation Player 25
Understanding Virtual Machines
25
Preparing to Create a Virtual Machine
Create a Virtual Machine
25
30
Use Easy Install to Install a Guest Operating System 31
Install a Guest Operating System Manually
Importing Virtual Machines
32
33
5 Installing and Upgrading VMware Tools 36
Installing VMware Tools
36
Upgrading VMware Tools
37
Configure Software Update Preferences
38
Configure VMware Tools Updates for a Specific Virtual Machine
Manually Installing and Upgrading VMware Tools
39
40
Starting the VMware User Process Manually If You Do Not Use a Session Manager
Uninstalling VMware Tools
VMware, Inc.
46
47
3
Using VMware Workstation Player for Windows
6 Starting and Stopping Virtual Machines in Workstation Player 48
Start a Virtual Machine in Workstation Player
48
Start an Encrypted Virtual Machine in Workstation Player
Download a Virtual Appliance in Workstation Player
Power Off a Virtual Machine in Workstation Player
49
49
49
Remove a Virtual Machine from the Library in Workstation Player
Use Ctrl+Alt+Delete to Shut Down a Guest
50
50
Suspend and Resume a Virtual Machine in Workstation Player
Reset a Virtual Machine in Workstation Player
51
51
Enable Autologon in a Windows Virtual Machine
52
Set Workstation Player Preferences for Virtual Machine Closing Behavior
52
7 Changing the Virtual Machine Display 54
Configure Display Settings for a Virtual Machine
Use Full Screen Mode in Workstation Player
Use Unity Mode
54
55
56
Use Multiple Monitors for One Virtual Machine in Workstation Player
59
8 Using Removable Devices and Printers in Virtual Machines 60
Use a Removable Device in a Virtual Machine
60
Connecting USB Devices to Virtual Machines
Add a Host Printer to a Virtual Machine
63
Using Smart Cards in Virtual Machines
64
61
9 Setting Up Shared Folders for a Virtual Machine 67
Using Shared Folders
68
Enable a Shared Folder for a Virtual Machine
69
View Shared Folders in a Windows Guest
70
Mounting Shared Folders in a Linux Guest
71
Change Shared Folder Properties
71
Change the Folders That a Virtual Machine Can Share
Disable Folder Sharing for a Virtual Machine
Mapping a Virtual Disk to the Host System
72
73
73
10 Configuring and Managing Virtual Machines 75
Change the Name of a Virtual Machine
75
Change the Guest Operating System for a Virtual Machine
Change the Working Directory for a Virtual Machine
76
Change the Virtual Machine Directory for a Virtual Machine
Change the Memory Allocation for a Virtual Machine
Configuring Video and Sound
VMware, Inc.
76
77
77
78
4
Using VMware Workstation Player for Windows
Moving Virtual Machines
81
Delete a Virtual Machine
84
View the Message Log for a Virtual Machine
85
Using the VIX API 85
Install New Software in a Virtual Machine
85
11 Configuring and Managing Devices 87
Configuring DVD, CD-ROM, and Floppy Drives
Configuring a USB Controller
87
89
Configuring and Maintaining Virtual Hard Disks
Configuring Virtual Ports
91
98
Configuring Generic SCSI Devices
102
Configuring Sixteen-Way Virtual Symmetric Multiprocessing
Configuring Keyboard Features
104
105
Modify Hardware Settings for a Virtual Machine
114
12 Configuring Network Connections 116
Understanding Virtual Networking Components
116
Understanding Common Networking Configurations
Configuring Bridged Networking
117
118
Configuring Network Address Translation
Configuring Host-Only Networking
120
120
Changing a Networking Configuration
122
13 Configuring Virtual Machine Option Settings 125
Configuring General Option Settings for a Virtual Machine
Configuring Power Options for a Virtual Machine
127
Configuring VMware Tools Options for a Virtual Machine
Configuring Unity Mode for a Virtual Machine
Configuring Autologin for a Virtual Machine
125
128
129
129
14 Configuring Virtual Machine Hardware Settings 130
Adding Hardware to a Virtual Machine
130
Removing Hardware from a Virtual Machine
Adjusting Virtual Machine Memory
132
Configuring Virtual Machine Processor Settings
133
Configuring and Maintaining Virtual Hard Disks
133
Configuring CD-ROM and DVD Drive Settings
Configuring Floppy Drive Settings
Configuring USB Controller Settings
Configuring Sound Card Settings
137
138
Configuring Virtual Network Adapter Settings
VMware, Inc.
132
139
143
143
5
Using VMware Workstation Player for Windows
Configuring Parallel Port Settings
Configuring Serial Port Settings
144
144
Configuring Generic SCSI Device Settings
Configuring Printer Settings
Configuring Display Settings
145
146
146
Installing a Guest Operating System on a Physical Disk or Unused Partition
VMware, Inc.
147
6
Using VMware Workstation Player for
Windows
Using VMware Workstation Player for Windows describes how to use VMware Workstation Player™ to
create, configure, and manage virtual machines on a Windows host.
Intended Audience
This information is intended for anyone who wants to install, upgrade, or use Workstation Player on a
Windows host.
VMware, Inc.
7
Introduction and System
Requirements
1
Workstation Player is a desktop application that lets you create, configure, and run virtual machines. You
can also use Workstation Player to download and run virtual appliances.
Host computers that run Workstation Player must meet specific hardware and software requirements.
Virtual machines that run in Workstation Player support specific devices and provide certain features.
This chapter includes the following topics:
n
Host System Requirements for Workstation Player
n
Virtual Machine Features and Specifications
Host System Requirements for Workstation Player
The physical computer on which you install Workstation Player is called the host system and its operating
system is called the host operating system. To run Workstation Player, the host system and the host
operating system must meet specific hardware and software requirements.
Processor Requirements for Host Systems
You must install Workstation Player on a host system that meets certain processor requirements.
Supported Processors
The following host systems are supported.
n
n
Systems using processors launched in 2011 or later except for systems using the following
processors.
n
Intel Atom processors based on the 2011 Bonnell micro-architecture. For example, Atom
Z670/Z650 and Atom N570.
n
Intel Atom processors based on the 2012 Saltwell micro-architecture. For example, Atom Atom
S1200, Atom D2700/D2500, and Atom N2800/N2600.
n
AMD processors based on the Llano and Bobcat micro-architectures.
Systems using the following processors.
n
Intel processors based on the 2010 Westmere micro-architecture. For example, Xeon 5600, Xeon
3600, Core i7-970, Core i7-980, and Core i7-990.
VMware, Inc.
8
Using VMware Workstation Player for Windows
Processor Requirements for 64-Bit Guest Operating Systems
For supported processors to run 64-bit guest operating systems, the host system must use one of the
following processors.
n
An AMD CPU with AMD-V support
n
An Intel CPU with VT-x support
If you have an Intel CPU that has VT-x support, you must verify that VT-x support is enabled in the host
system BIOS. The BIOS settings that must be enabled for VT-x support vary depending on the system
vendor. See the VMware knowledge base article at http://kb.vmware.com/kb/1003944 for information
about how to determine if VT-x support is enabled.
When you install a 64-bit operating system, Workstation Player performs checks to make sure the host
system has a supported processor. You cannot install a 64-bit operating system if the host system does
not meet the processor requirements.
Supported Host Operating Systems
You can install Workstation Player on Windows and Linux host operating systems.
To see a list of the supported host operating systems, search the online VMware Compatibility Guide on
the VMware Web site.
Workstation Player is not listed, but the information for Workstation Pro is applicable to
Workstation Player. Operating systems that are not listed are not supported for use in a virtual machine.
Memory Requirements for Host Systems
The host system must have enough memory to run the host operating system, the guest operating
systems that run inside the virtual machines on the host system, and the applications that run in the host
and guest operating systems.
The minimum memory required on the host system is 2 GB. 4 GB and above is recommended.
To support Windows 7 Aero graphics in a virtual machine, at least 3 GB of host system memory is
required. 1 GB of memory is allocated to the guest operating system and 256 MB is allocated to graphics
memory.
See your guest operating system and application documentation for more information on memory
requirements.
Display Requirements for Host Systems
The host system must have a 16-bit or 32-bit display adapter. Use the latest graphics driver
recommended for the host system.
VMware, Inc.
9
Using VMware Workstation Player for Windows
To support Windows 7 Aero graphics, the host system should have either an NVIDIA GeForce 8800GT or
later or an ATI Radeon HD 2600 or later graphics processor.
Important 3D benchmarks, such as 3DMark '06, might not render correctly or at all when running
Windows Vista or Windows 7 virtual machines on some graphics hardware.
Disk Drive Requirements for Host Systems
Host systems must meet certain disk drive requirements. Guest operating systems can reside on physical
disk partitions or in virtual disk files.
Table 1‑1. Disk Drive Requirements for Host Systems
Drive Type
Requirements
Hard disk
n
IDE, SATA, SCSI and NVMe hard drives are supported.
n
At least 1 GB free disk space is recommended for each guest operating system and
the application software used with it. If you use a default setup, the actual disk space
needs are approximately the same as those for installing and running the guest
operating system and applications on a physical computer.
n
For installation, approximately 200 MB free disk space is required on Linux and 250
MB free disk space is required on Windows. You can delete the installer after the
installation is complete to reclaim disk space.
n
IDE, SATA, and SCSI optical drives are supported.
n
CD-ROM and DVD drives are supported.
n
ISO disk image files are supported.
Optical CD-ROM and DVD
Floppy
Virtual machines can connect to disk drives on the host computer. Floppy disk image
files are also supported.
Solid-State Drives
If your host machine has a physical solid-state drive (SSD), the host informs guest operating systems
they are running on an SSD.
This allows the guest operating systems to optimize behavior. How the virtual machines recognize SSD
and use this information depends on the guest operating system and the disk type of the virtual disk
(SCSI, SATA, IDE, or NVMe).
n
On Windows 8, Windows 10, Ubuntu, and Red Hat Enterprise Linux virtual machines, all drive types
can report their virtual disks as SSD drives.
Note
n
NVMe virtual hard disks are natively supported for Windows 8.1 and later.
n
To create a new a virtual machine with a Windows 7 or Windows 2008 R2 guest operating system
using NVMe as the virtual hard disk, apply the appropriate Windows hot fix. See
https://support.microsoft.com/en-us/kb/2990941.
n
Several Linux operating systems support NVMe while others do not. Check with the operating
system vendor.
VMware, Inc.
10
Using VMware Workstation Player for Windows
n
On Windows 7 virtual machines, only IDE and SATA virtual disks can report their virtual disks as SSD.
SCSI virtual disks only report as SSD when used as a system drive in a virtual machine, or as a
mechanical drive when used as a data drive inside a virtual machine.
Use the virtual machine operating system to verify your virtual machine is using SSD as its virtual disk.
Local Area Networking Requirements for Host Systems
You can use any Ethernet controller that the host operating system supports.
Non-Ethernet networks are supported by using built-in network address translation (NAT) or by using a
combination of host-only networking and routing software on the host operating system.
Virtual Machine Features and Specifications
Workstation Player virtual machines support specific devices and provide certain features.
Supported Guest Operating Systems
A guest operating system can be Windows, Linux, and other commonly used operating systems.
For the most recent list of guest operating systems that VMware products support, see the VMware
Compatibility Guide site: http://www.vmware.com/resources/compatibility/search.php.
Workstation Player is not listed, but the information for Workstation Pro is applicable to
Workstation Player. Operating systems that are not listed are not supported for use in a virtual machine.
For instructions about how to install the most common guest operating systems, see the VMware Guest
Operating System Installation Guide: http://partnerweb.vmware.com/GOSIG/home.html.
Virtual Machine Processor Support
Virtual machines support certain processor features.
n
The same as the processor on the host computer.
n
One virtual processor on a host system that has one or more logical processors.
n
Up to 16 virtual processors (sixteen-way virtual symmetric multiprocessing, or Virtual SMP) on a host
system that has at least 2 logical processors.
Note Workstation Player considers multiprocessor hosts that have 2 or more physical CPUs, singleprocessor hosts that have a multicore CPU, and single-processor hosts that have hyperthreading
enabled, to have two logical processors.
Virtual Machine Memory Allocation
The total amount of memory that you can assign to all virtual machines running on a single host system is
limited only by the amount of RAM on the host.
The maximum amount of memory for each virtual machine is 64GB.
VMware, Inc.
11
Using VMware Workstation Player for Windows
Compatible Virtual Machines and System Images
Workstation Player can run virtual machines and system images that other VMware products create and
some non-VMware products.
VMware virtual
machines
Workstation Player runs virtual machines that were created by using
Workstation 4 and later, GSX Server 3.x, VMware Server, and ESX Server
2.5 and later. Workstation 4 virtual machines run in legacy mode. You must
use another VMware product to upgrade virtual machines created in
versions earlier than Workstation 4 before you can run them in
Workstation Player.
Microsoft Virtual PC
and Virtual Server
virtual machines
On Windows hosts, Workstation Player can run Microsoft Virtual PC and
Virtual Server virtual machines. When you open a Virtual PC virtual
machine in Workstation Player, Workstation Player creates a configuration
file that is VMware product compatible and that has a .vmx file extension.
Workstation Player preserves the original Virtual PC configuration file and
gives the file a .vmc file extension. You can save the VMware productcompatible virtual machine without changing the original Virtual PC
configuration file.
Symantec Backup Exec
System Recovery
system images
On Windows hosts, Workstation Player can run system images that were
created by using Symantec Backup Exec System Recovery, formerly
Symantec LiveState Recovery. When you open a Backup Exec System
Recovery system image in Workstation Player, Workstation Player creates
a configuration file that is VMware product compatible and that has a .vmx
extension. Workstation Player preserves the original Backup Exec System
Recovery system image file and gives the file a .sv2i file extension.
VMware, Inc.
12
Installing and Using
Workstation Player
2
Installing Workstation Player typically involves running a standard GUI wizard.
This chapter includes the following topics:
n
Install Workstation Player on a Windows Host
n
Start Workstation Player
n
Use the Workstation Player Window
n
Transferring Files and Text
n
Download a Virtual Appliance in Workstation Player
n
Remove a Virtual Machine from the Library in Workstation Player
n
Email Address Collection in Workstation Player
n
Uninstall Workstation Player
Install Workstation Player on a Windows Host
You install Workstation Player on a Windows machine by running the installation wizard.
Prerequisites
n
Verify that your Windows machine meets the host system requirements. See Host System
Requirements for Workstation Player.
n
Download the Workstation Player installer file to your Windows machine. You can obtain the
Workstation Player installer file from the VMware Web site.
n
If you are installing the purchased version of Workstation Player, verify that you have a license key.
You can use Workstation Player free of charge for non-commercial use. When you use
Workstation Player for the first time, you can enter your email address and use it free of charge, or you
can enter your purchased license key to use Workstation Player and have access to additional features.
Procedure
1
On your Windows machine, double-click the Workstation Player installer file.
The installer filename is similar to VMware-player-xxxx-xxxx.exe, where xxxx-xxxx is the version
and build numbers.
VMware, Inc.
13
Using VMware Workstation Player for Windows
2
Follow the prompts to finish the installation.
3
(Optional) To activate Workstation Player features, start Workstation Player and enter your license
key.
a
Double-click the Workstation Player icon or select Start > All Programs VMware Player to start
Workstation Player.
b
Select Enter a license key to allow commercial use:.
c
Type your license key and click Continue.
Run an Unattended Workstation Player Installation on a Windows
Host
You can use the unattended installation feature of the Microsoft Windows Installer (MSI) to install
Workstation Player on Windows host systems without having to respond to wizard prompts. This feature
is convenient in a large enterprise.
Prerequisites
n
Verify that the host system meets the host system requirements.
n
Obtain the Workstation Player software and license key.
n
Verify that the host computer has version 2.0 or later of the MSI runtime engine. This version of the
installer is available in versions of Windows beginning with Windows XP and is available from
Microsoft. For more information, see the Microsoft Web site.
n
Familiarize yourself with the installation properties. See Installation Properties.
Procedure
1
Log in to the host system as the Administrator user or as a user who is a member of the local
Administrators group.
If you log in to the host system as the Administrator user or as a user who is a member of the local
Administrators group.
2
Extract the administrative installation image from the setup file.
The setup filename is similar to VMware=player-xxxx-xxxx.exe where xxxx-xxxx is the version
and build number.
For example, if you enter setup.exe/?, the flag displays a windows message box with the command
line usage for the installer.
3
Enter the installation command on one line.
The following example installs Workstation Player:
VMware-player-x.x.x-xxxxxx.exe /s /v/qn EULAS_AGREED=1 SERIALNUMBER="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
VMware, Inc.
14
Using VMware Workstation Player for Windows
You can use the optional INSTALLDIR property to specify a file path for the installation that is different
from the default location.
Note The double quotes around the file path are important. All the MSI arguments are passed with
the /v option. The outer quotes group the MSI arguments and the double quotes put a quote in that
argument.
You can also run an unattended Workstation Player uninstallation on a Windows host. The following
example uninstalls Workstation Player and removes the license from the host.
VMware-player-x.x.x-xxxxxx.exe /s /v"/qn REMOVE=ALL"
Installation Properties
When you perform an unattended installation of Workstation Player, you can customize the installation by
specifying installation properties in the installation command.
To specify an installation property in the installation command, use the format property="value". A value of
1 means true and a value of 0 means false.
Table 2‑1. Installation Properties
Property
Description
Default Value
AUTOSOFTWAREUPDATE
Enables automatic upgrades for Workstation Player or Workstation
Player when a new build becomes available.
1
DATACOLLECTION
Sends user experience information to VMware.
1
DESKTOP_SHORTCUT
Adds a shortcut on the desktop when Workstation Player is installed.
1
ENABLE_VIRTUAL_PRINTING
Enables support for ThinPrint virtual printing on the Windows host
after installing.
0
EULAS_AGREED
Allows you to silently accept the product EULAs. Set to 1 to complete
the installation or upgrade.
0
INSTALLDIR
Install Workstation Player in a directory that is different from the
default Workstation Player location.
C:\Program Files
(86)\VMware\VMware
Player
KEEP_LICENSE
Specifies whether to keep or remove license keys when
Workstation Player is uninstalled.
1
KEEP_SETTINGFILES
Specifies whether to keep or remove settings files when
Workstation Player is uninstalled.
1
SERIALNUMBER
Lets you enter the license key when Workstation Player is installed.
Enter the license key with hyphens, for example, "xxxxx-xxxxx-xxxxxxxxxx-xxxxx".
SIMPLIFIEDUI
Turn on or off certain UI features of Workstation Player.
SOFTWAREUPDATEURL
Specifies a custom URL for managing software updates (separate
from vmware.com).
VMware, Inc.
0
15
Using VMware Workstation Player for Windows
Table 2‑1. Installation Properties (Continued)
Property
Description
Default Value
STARTMENU_SHORTCUT
Adds a Start menu item when Workstation Player is installed.
1
SUPPORTURL
Set a support URL or email alias specifically for your users to contact
with product issues through the Workstation Player or
Workstation Player Help menu.
Start Workstation Player
When you start Workstation Player, the Workstation Player window opens.
You might have a desktop shortcut, a quick launch shortcut, or a combination of these options in addition
to a Start menu item.
Procedure
u
Select Start > Programs > VMware Player.
Use the Workstation Player Window
You interact with Workstation Player and virtual machines through the Workstation Player window. The
best way to learn how to use Workstation Player is to use it. The Workstation Player window is designed
to be intuitive and easy to use.
Procedure
n
Use the icons on the Home tab to create a new virtual machine, open an existing virtual machine,
download a virtual appliance, or view the Workstation Player help system.
n
Select a powered-off virtual machine in the library see the summary view.
The summary view shows a summary of configuration information and the virtual machine state. You
can start the virtual machine and edit virtual machine settings from the summary view.
n
Select a powered-off virtual machine in the library and click Play virtual machine to start the virtual
machine and see the console view.
The console view is like the monitor display of a physical computer.
n
Select a virtual machine in the library and use the Virtual Machine menu on the menu bar to perform
all virtual machine operations for the selected virtual machine.
n
When a virtual machine is powered on, use the icons on the status bar to perform actions on virtual
devices such as hard disks, CD/DVD drives, floppy drives, and network adapters.
You can click or right-click on a removable device icon to connect or disconnect the device or edit its
settings.
VMware, Inc.
16
Using VMware Workstation Player for Windows
n
Use the About VMware Player window to access information about your installation of
Workstation Player, including license key information.
Click Player > Help > About VMware Workstation 12 Player.
n
If you have an individual license for Workstation Player, the key is displayed in the License
Information section in the Type field. It is labeled Individual and is followed by your license key.
n
If you have a version of Workstation Player licensed for multiple users, the Type field displays
Volume and your license key is not displayed.
n
If you did not enter a license for Workstation Player, the Type field displays Not applicable and a
license key is not displayed.
n
If you have an evaluation license key for Workstation Player, the Type field displays Not
applicable. The date the evaluation license key expires is also displayed.
Note The evaluation key does not activate Horizon FLEX features.
Transferring Files and Text
You can use the drag-and-drop and copy and paste features, shared folders, and mapped drives to
transfer text and files between the host system and virtual machines.
Using the Drag-and-Drop Feature
You can use the drag-and-drop feature to move files and directories, email attachments, plain text,
formatted text, and images between the host system and virtual machines.
You can drag files or directories between the following locations.
n
File managers, such as Windows Explorer, on the host system and virtual machines.
n
A file manager to an application that supports drag-and-drop.
n
Applications, such as zip file managers, which support drag-and-drop extraction of individual files.
n
Different virtual machines.
Dragging email attachments is especially useful in Unity mode.
When you drag a file or folder between the host and a virtual machine, Workstation Player copies the file
or folder to the location where you drop it. For example, if you drop a file on the desktop icon of a word
processor, the word processor opens a copy of the original file. The original file does not include changes
that you make to the copy.
Initially, the application opens a copy of the file that is stored in the temp directory. On Windows, the temp
directory is specified in the %TEMP% environment variable. On Linux and Solaris, the temp directory
is /tmp/VMwareDnD. Save the file in a different directory to protect changes that you make.
VMware, Inc.
17
Using VMware Workstation Player for Windows
Drag-and-Drop Requirements and Restrictions
The drag-and-drop feature has certain requirements and restrictions.
n
You must install VMware Tools in a virtual machine to use the drag-and-drop feature.
n
The drag-and-drop feature requires Linux hosts and guests to run X Windows and Solaris 10 guests
to run an Xorg X server and JDS/Gnome.
n
You can drag images between applications on Windows hosts and applications on Windows guests
only. Dragging images is not supported for Linux hosts or guests.
n
You can drag files and directories, email attachments, plain text, and formatted text between Linux
and Windows hosts and Linux, Windows, and Solaris 10 guests only.
n
Dragging email attachments is restricted to images or files smaller than 4 MB.
n
Dragging plain text and formatted text (including the formatting) is restricted to amounts less than 4
MB.
n
Dragging text is restricted to text in languages that can be represented by Unicode characters.
n
Workstation Player uses the PNG format to encode images that are dragged. Dragging images is
restricted to images smaller than 4 MB after conversion to PNG format.
Using the Copy and Paste Feature
You can cut, copy, and paste text between virtual machines and between applications running in virtual
machines.
You can also cut, copy, and paste images, plain text, formatted text, and email attachments between
applications running on the host system and applications running in virtual machines.
Copying and pasting email attachments is especially useful in Unity mode. Use the normal hot keys or
menu choices to cut or copy and paste.
Copy and Paste Requirements and Restrictions
The copy and paste feature has certain requirements and restrictions.
n
You must install VMware Tools in a virtual machine to use the copy and paste feature.
n
The copy and paste feature works with Linux and Windows hosts and Linux, Windows, and Solaris 10
guests only.
n
The copy and paste feature requires Linux hosts and guests to run X Windows and Solaris 10 guests
to run an Xorg X server and JDS/Gnome.
n
Copying and pasting email attachments is restricted to images or files smaller than 4 MB.
n
Copying and pasting plain text and formatted text (including the formatting) is restricted to amounts
less than 4MB.
VMware, Inc.
18
Using VMware Workstation Player for Windows
n
Copying and pasting text is restricted to text in languages that can be represented by Unicode
characters.
n
Workstation Player uses the PNG format to encode images that are copied and pasted. Copying and
pasting images is restricted to images smaller than 4 MB after conversion to PNG format.
n
You cannot copy and paste files between virtual machines.
Download a Virtual Appliance in Workstation Player
You can download a virtual appliance in Workstation Player. A virtual appliance is a prebuilt,
preconfigured, and ready-to-run software application that is packaged with the operating system in a
virtual machine.
Procedure
u
Select Player > File > Download a Virtual Appliance.
A Web browser opens to the Virtual Appliance Marketplace page on the VMware Web site. You can
browse to and download virtual appliances from this page.
Remove a Virtual Machine from the Library in
Workstation Player
When you open a virtual machine in Workstation Player, it is added to the virtual machine library. You can
remove a virtual machine that you are not using from the library.
Removing a virtual machine from the library does not delete the virtual machine or any of its files from the
host file system. The virtual machine is removed only from the library. If you open the virtual machine
again, the virtual machine is added back to the library.
Prerequisites
Power off the virtual machine.
Procedure
u
Select the virtual machine, right-click, and select Remove VM from the Library.
The virtual machine is removed from the library without any confirmation.
Email Address Collection in Workstation Player
The trial version of Workstation Player prompts you for your email address when you use it for the first
time.
You can use Workstation Player free of charge for non-commercial use. When you use
Workstation Player for the first time, you can enter your email address and use it free of charge, or you
can enter your purchased license key to use Workstation Player and have access to additional features.
VMware, Inc.
19
Using VMware Workstation Player for Windows
Uninstall Workstation Player
You must uninstall the previous version of Workstation Player before you can install the latest version.
Procedure
u
Use the Windows uninstall feature.
For example, on Windows 7, select Start > Control Panel > Programs > Programs and Features >
Uninstall a program.
VMware, Inc.
20
Changing Workstation Player
Preference Settings
3
Workstation Player preference settings are global configuration settings that apply to Workstation Player
and the virtual machines that you run in Workstation Player.
To change Workstation Player preference settings, select Player > File > Preferences.
This chapter includes the following topics:
n
Configuring Close Behavior Preference Settings
n
Configuring Virtual Printers on Windows Hosts
n
Configuring Software Updates Settings
n
Join or Leave the Customer Experience Improvement Program
Configuring Close Behavior Preference Settings
Close behavior preference settings control what Workstation Player does with virtual machines when you
close them.
To configure close behavior preference settings, select File > Preferences.
Table 3‑1. Close Behavior Preference Settings
Setting
Description
Suspend the virtual machine
The virtual machine is suspended when you close it. The next
time you start Workstation Player, the virtual machine resumes
operation from the point at which it was suspended.
Power off the virtual machine
The virtual machines is powered off when you close it. The next
time you start Workstation Player, the virtual machine is in a
powered off state.
Leave the virtual machine running
The virtual machine remains running in the background when
you close it. The next time you start Workstation Player, the
virtual machine is in a powered on state.
Confirm before closing a virtual machine
Workstation Player prompts you for confirmation when you close
a virtual machine.
Return to the VM Library after closing a virtual machine
Workstation Player returns the virtual machines to the library
after you close it. You can open another virtual machine or edit
virtual machine settings.
VMware, Inc.
21
Using VMware Workstation Player for Windows
Configuring Virtual Printers on Windows Hosts
On Windows hosts, you can configure Workstation Player to support virtual printing on all printers
configured on the host.
Virtual printing is disabled by default on Windows hosts. To enable or disable virtual printing on a
Windows host system, select Player > File > Preferences > Devices. Select the Enable virtual printers
checkbox to enable virtual printers. VMware Tools must be installed on the virtual machine to enable
printing. You must have administrator privileges to enable or disable virtual printers.
The Workstation Player printer feature uses ThinPrint technology to replicate the host system printer
mapping in the virtual machine. When you enable the virtual machine printer, Workstation Player
configures a virtual serial port to communicate with the host printers.
See Add a Host Printer to a Virtual Machine
Configuring Software Updates Settings
Software updates settings control when Workstation Player downloads software updates to the host
system and whether it uses a proxy server to connect to the VMware Update Server.
To configure software updates settings, select Player > File > Preferences.
Table 3‑2. Software Update Preference Settings
Setting
Description
Check for product updates on startup
Check for new versions of the application and installed components when
you start Workstation Player. This setting is selected by default.
Check for new software components as needed
Check for a new version of a component when a component, such as
VMware Tools, is required. When this setting is selected,
Workstation Player verifies if a new version is available to download and
install.
Download All Components Now
Manually download all of the available software components to the host
system. Click this button if you are planning to use a virtual machine at a
later time when you do not have access to the Internet.
Connection Settings
Click this button to configure a proxy server to connect to the VMware
Update Server.
Configuring Connection Settings for a Proxy Server
You can configure connection settings to use a proxy server to connect to the VMware Update Server.
To configure proxy connection settings, select Player > File > Preferences and click Connection
Settings.
VMware, Inc.
22
Using VMware Workstation Player for Windows
Table 3‑3. Connection Settings
Setting
Description
No proxy
Do not use a proxy server.
Windows proxy settings
(Windows hosts only) Workstation Player uses the host proxy settings from the Connections
tab in the Internet Options control panel to access the VMware Update Server.
Click Internet Options to set the guest connection options.
System proxy settings
(Linux hosts only) Workstation Player uses the host proxy settings to access the VMware
Update Server.
Manual proxy settings
Select an HTTP or SOCKS proxy, specify the proxy server address, and designate a port
number to access the VMware Update Server.
Username and Password
The username and password to use for proxy server authentication. On Linux hosts, if either
the Username or Password text box is blank, Workstation Player uses the username and
password set in the gnome settings.
You must restart Workstation Player for proxy setting changes to take effect.
Understanding the Automatic Software Update Process
When you enable automatic software updates, you are always aware of the latest releases from VMware.
By keeping your software up-to-date, you can take advantage of new product features and performance
improvements, ensure that your system includes the latest patches, and obtain timely support for new
guest operating systems. You can enable the automatic software update feature when you install
Workstation Player or by configuring Workstation Player preference settings. You can disable the feature
at any time.
To determine if software updates are available, the VMware software updates feature securely sends the
following anonymous information to VMware.
n
A universal unique identifier (UUID), which it uses to identify each individual system
n
The product name, the product version, and the build number
n
Your host operating system name, version, and the locale setting
The VMware software updates feature does not collect any personal data, such as your name, address,
telephone number, or mail address. Your product license key and MAC address are not sent to VMware,
and VMware does not store your IP address with the data that it receives from you.
VMware might use the information it receives from the software update feature for product planning
purposes. VMware limits access to your data and uses industry-standard controls to protect your
information, including physical access controls, Internet firewalls, intrusion detection, and network
monitoring.
The information collected by the VMware software updates feature is handled in accordance with VMware
Privacy Policy.
VMware, Inc.
23
Using VMware Workstation Player for Windows
Join or Leave the Customer Experience Improvement
Program
The VMware Customer Experience Improvement Program (CEIP) provides information to VMware.
VMware uses the information to improve its products and services, to fix problems, and to advise you on
how best to deploy and use VMware products.
Workstation Player participates in the VMware CEIP. Information about the data collected through CEIP
and how VMware uses it are in the Trust & Assurance Center at
http://www.vmware.com/trustvmware/ceip.html.
The CEIP appears the first time you start Workstation Player after you install the product. You must then
make a selection. You can change your selection any time afterwards.
Procedure
1
Start Workstation Player.
2
Select Player > File > Preferences.
3
Join or leave the CEIP depending on the participation preference currently selected.
Option
Description
Join
Select Join the VMware Customer Experience Improvement Program.
Leave
Unselect Join the VMware Customer Experience Improvement Program.
VMware, Inc.
24
Creating Virtual Machines in
Workstation Player
4
You use the New Virtual Machine wizard to create virtual machines. The New Virtual Machine wizard
guides you through the steps for setting up a new virtual machine, helping you set options and
parameters.
To start the New Virtual Machine wizard, select Player > File > New Virtual Machine, or click Create a
New Virtual Machine on the welcome page.
This chapter includes the following topics:
n
Understanding Virtual Machines
n
Preparing to Create a Virtual Machine
n
Create a Virtual Machine
n
Use Easy Install to Install a Guest Operating System
n
Install a Guest Operating System Manually
n
Importing Virtual Machines
Understanding Virtual Machines
A virtual machine is a software computer that, like a physical machine, runs an operating system and
applications. A virtual machine uses the physical resources of the physical machine on which it runs,
which is called the host system. Virtual machines have virtual devices that provide the same functionality
as physical hardware, but with the additional benefits of portability, manageability, and security.
A virtual machine has an operating system and virtual resources that you manage in much the same way
that you manage a physical computer. For example, you install an operating system in a virtual machine
in the same way that you install an operating system on a physical computer. You must have a CD-ROM,
DVD, or ISO image that contains the installation files from an operating system vendor.
Preparing to Create a Virtual Machine
When you create a virtual machine, you specify or accept defaults for a few basic virtual machine
settings.
n
How you want to install the guest operating system.
n
A name for the virtual machine and a location for the virtual machine files.
VMware, Inc.
25
Using VMware Workstation Player for Windows
n
The size of the virtual disk and whether to split the disk into multiple virtual disk files.
n
Whether to customize hardware settings, including memory allocation, number of virtual processors,
and network connection type.
Selecting a Guest Operating System
The New Virtual Machine prompts you to select the source media for the operating system that will run
inside the virtual machine. You can specify an installer disc inserted in a physical drive, an ISO image file,
or you can instruct the New Virtual Machine wizard to create a virtual machine that has a blank hard
disk.
If you select an installer disc or an ISO image file and the operating system supports Easy Install, the
guest operating system installation is automated and VMware Tools is installed. If the installer disc or ISO
image file contains a product key number and is already set up to perform an unattended installation, the
only benefit of using Easy Install is the automatic installation of VMware Tools.
If you instruct the New Virtual Machine wizard to create a virtual machine that has a blank hard disk, the
wizard prompts you to specify an operating system and version and you must install the guest operating
system manually after the virtual machine is created. Workstation Player uses this information to set the
appropriate default values, name files associated with the virtual machine, adjust performance settings,
and work around special behaviors and bugs in the guest operating system. If the operating system you
plan to install is not listed in the wizard, select Other for both the operating system and version.
If you are installing an operating system that supports Easy Install but you do not want to use Easy Install,
you can instruct the wizard to create a virtual machine that has a blank disk and install the guest
operating system manually.
Supported Guest Operating Systems
A guest operating system can be Windows, Linux, and other commonly used operating systems.
For the most recent list of guest operating systems that VMware products support, see the VMware
Compatibility Guide site: http://www.vmware.com/resources/compatibility/search.php.
Workstation Player is not listed, but the information for Workstation Pro is applicable to
Workstation Player. Operating systems that are not listed are not supported for use in a virtual machine.
For instructions about how to install the most common guest operating systems, see the VMware Guest
Operating System Installation Guide: http://partnerweb.vmware.com/GOSIG/home.html.
Providing Easy Install Information
When the New Virtual Wizard detects an operating system that supports Easy Install, the wizard prompts
you for information about the guest operating system. After the virtual machine is created, the guest
operating system installation is automated and VMware Tools is installed.
For Windows guest operating systems, you must provide the following Easy Install information.
VMware, Inc.
26
Using VMware Workstation Player for Windows
Table 4‑1. Easy Install Information for Windows Guests
Easy Install Prompt
Description
Windows product key
(Optional) Type a product key unless the installation media contains a volume license
product key. If you provide a product key here, you are not prompted to provide a
product key when you install the guest operating system.
Version of Windows to install
Select the Windows operating system edition to install.
Full name
The name to use to register the guest operating system. Do not use the name
Administrator or Guest. If you use one of these names, you must enter a different name
when you install the guest operating system.
Password
(Optional) The password to use for an account with Administrator permissions on
Windows operating systems other than Windows 2000. On Windows 2000, this is the
password for the Administrator account. On Windows XP Home, an Administrator
account without a password is created and you are automatically logged in to the guest
operating system.
Log on automatically (requires a
password)
(Optional) Save your login credentials and bypass the login dialog box when you power
on the virtual machine. You must enter a name and password to use this feature.
For Linux guest operating systems, you must provide the following Easy Install information.
Table 4‑2. Easy Install Information for Linux Guests
Prompt
Description
Full name
The name to use to register the guest operating system, if registration is required.
Workstation Player uses the first name to create the host name for the virtual machine.
User name
Your user name. You can use lowercase letters, numbers, and dashes, but avoid using
user names that begin with a dash. Do not use the name root. Some operating
systems set up sudo access for this user and other operating systems require this user
to use su to obtain root privileges.
Password
The password for the User name and the root user.
See Use Easy Install to Install a Guest Operating System.
Specifying the Virtual Machine Name and File Location
The New Virtual Machine wizard prompts you for a virtual machine name and a directory for the virtual
machine files.
The name of the default directory for virtual machine files is derived from the name of the guest operating
system, for example, Microsoft Windows 10 x64.
For standard virtual machines, the default directory for virtual machine files is located in the virtual
machine directory. For best performance, do not place the virtual machines directory on a network drive. If
other users need to access the virtual machine, consider placing the virtual machine files in a location that
is accessible to those users.
For shared virtual machines, the default directory for virtual machine files is located in the shared virtual
machines directory. Shared virtual machine files must reside in the shared virtual machines directory.
VMware, Inc.
27
Using VMware Workstation Player for Windows
Virtual Machines Directory
Workstation Player stores standard virtual machines in the virtual machines directory.
The default location of the virtual machines directory depends on the host operating system.
Table 4‑3. Default Virtual Machines Directory
Host Operating System
Default Location
Windows Server 2008 R2
C:\Documents and Settings\username\My Documents\My
Virtual Machines
Windows Server 2012 R2
username is the name of the currently logged-in user.
Windows 7
C:\Users\ username \Documents\Virtual Machines
Windows 8
username is the name of the currently logged in user.
Windows 10
Linux
homedir/vmware
homedir is the home directory of the currently logged in logged
in user.
Specifying Disk Capacity for a Virtual Machine
If you instruct the New Virtual Machine wizard to create a new virtual disk during a custom configuration,
the wizard prompts you to set the size of the virtual disk and specify whether to split the disk into multiple
virtual disk (.vmdk) files.
A virtual disk is made up of one or more virtual disk files. Virtual disk files store the contents of the virtual
machine hard disk drive. Almost all of the file content is virtual machine data. A small portion of the file is
allotted to virtual machine overhead. If the virtual machine is connected directly to a physical disk, the
virtual disk file stores information about the partitions that the virtual machine is allowed to access.
You can set a size between 0.001 GB and 8 TB for a virtual disk file. You can also select whether to store
a virtual disk as a single file or split it into multiple files.
Select Split virtual disk into multiple files if the virtual disk is stored on a file system that has a file size
limitation. When you split a virtual disk less than 950 GB, a series of 2-GB virtual disk files are created.
When you split a virtual disk greater than 950 GB, two virtual disk files are created. The maximum size of
the first virtual disk file is 1.9 TB and the second virtual disk file stores the rest of the data.
Disk space is not preallocated for the disk. The actual files that the virtual disk uses start small and
expand to their maximum size as needed. The main advantage of this approach is the smaller file size.
Smaller files require less disk space and are easier to move to a new location.
After you create a virtual machine, you can edit virtual disk settings and add additional virtual disks.
Disk Size Compatibility
The size of a virtual disk is limited to 8 TB. However, your hardware version, bus type, and controller type
also impact the size of your virtual disks.
VMware, Inc.
28
Using VMware Workstation Player for Windows
Workstation Hardware Version
Bus Type
Controller Type
Maximum Disk Size
10, 11, 12, 14
IDE
ATAPI
8192 GB (8TB)
10, 11, 12, 14
SCSI
BusLogic
2040 GB (2TB)
10, 11, 12, 14
SCSI
LSI Logic
8192 GB (8TB)
10, 11, 12, 14
SCSI
LSI Logic SAS
8192 GB (8TB)
10, 11, 12, 14
SATA
AHCI
8192 GB (8TB)
14
NVMe
NVMe
8192 GB (8TB)
9, 8, 7, 6.5
All
All
2040 GB (2TB)
6.0, 5
All
All
950 GB
To discover your SCSI controller type, open the virtual machine .vmx file. The value of the setting
scsi0.virtualDev determines your SCSI controller type.
Value
SCSI Controller Type
Blank or not present
BusLogic
lsilogic
LSI Logic
lsisas1068
LSI Logic SAS
Customizing Virtual Machine Hardware
You can click Customize Hardware on the last page of the New Virtual Machine wizard to customize
the virtual machine hardware.
You can change the default hardware settings, including memory allocation, number of virtual CPUs,
CD/DVD and floppy drive settings, and the network connection type.
Worksheet for Creating a Typical Virtual Machine
You can print this worksheet and write the values to specify when you create a typical virtual machine.
Table 4‑4. Worksheet: Typical Virtual Machine
Option
Write Your Value Here
Guest operating system source
Guest operating system type for manual installation
Easy Install information for Windows guests
n
Product key
n
Operating system version
n
Full name
n
Password
n
Credentials for automatic login
Easy Install information for Linux guests
n
Full name
n
User name
n
Password
VMware, Inc.
29
Using VMware Workstation Player for Windows
Table 4‑4. Worksheet: Typical Virtual Machine (Continued)
Option
Write Your Value Here
Virtual machine name
Virtual machine location
Disk capacity
Create a Virtual Machine
You create a virtual machine in Workstation Player by running the New Virtual Machine wizard.
Prerequisites
n
Verify that you have the information the New Virtual Machine wizard requires to create a virtual
machine. See Preparing to Create a Virtual Machine.
n
Verify that the guest operating system you plan to install is supported. See the online VMware
Compatibility Guide, which is available on the VMware Web site.
n
See the VMware Guest Operating System Installation Guide for information about the guest operating
system you plan to install.
n
If you are installing the guest operating system from an installer disc, insert the installer disc in the
CD-ROM drive in the host system.
n
If you are installing the guest operating system from an ISO image file, verify that the ISO image file is
in a directory that is accessible to the host system.
Procedure
1
Select Player > File > New Virtual Machine.
2
Select the source of the guest operating system.
3
Option
Description
Use a physical disc
Select the physical drive where you inserted the installation disc.
Use an ISO image
Type or browse to the location of the ISO image file.
Install the guest operating system later
Create a virtual machine that has a blank disk. You must install the guest
operating system manually after the virtual machine is created.
Specify information about the guest operating system.
Option
Description
You are using Easy Install
Type the Easy Install information for the guest operating system.
You are not using Easy Install
Select the guest operating system type and version. If the guest operating system
is not listed, select Other.
4
Type a virtual machine name and type or browse to the directory for the virtual machine files.
5
Select the virtual disk size and specify whether the disk should be split into multiple files.
VMware, Inc.
30
Using VMware Workstation Player for Windows
6
(Optional) Click Customize Hardware to change the default hardware settings.
You can also modify virtual hardware settings after you create the virtual machine.
7
(Optional) Select Power on this virtual machine after creation to power on the virtual machine after
it is created.
This option is not available if you are installing the guest operating system manually.
8
Click Finish to create the virtual machine.
If you are using Easy Install, guest operating system installation begins when the virtual machine powers
on. The guest operating system installation is automated and typically runs without requiring any input
from you. After the guest operating system is installed, Easy Install installs VMware Tools.
If you are not using Easy Install, the virtual machine appears in the library.
What to do next
If you used Easy Install and the virtual machine did not power on when the installation finished, power on
the virtual machine to start the guest operating system installation. See Use Easy Install to Install a Guest
Operating System.
If you did not use Easy Install, install the guest operating system manually. See Install a Guest Operating
System Manually.
Use Easy Install to Install a Guest Operating System
When you use Easy Install, you usually do not need to provide information during guest operating system
installation.
If you did not provide all of the Easy Install information in the New Virtual Machine wizard, you might be
prompted for a product key, username, or password.
Also, if the guest operating system installation consists of multiple discs or ISO image files, the installer
might prompt you for the next disk.
Procedure
n
If the installer prompts you for a product key, username, or password, click in the virtual machine
window and type the required information.
Mouse and keyboard input are captured by the virtual machine.
n
If you are using physical discs and the installer prompts you for the next disk, use the CD-ROM or
DVD drive on the host system.
VMware, Inc.
31
Using VMware Workstation Player for Windows
n
If you are using multiple ISO image files and the installer prompts you for the next disk, select the
next ISO image file.
Option
Description
Windows host
Click Change Disk and browse to the next ISO image file.
Linux host
a
Select Virtual Machine > Removable Devices > CD/DVD > Settings and
browse to the next ISO image file.
b
Select Connected.
c
Click Save.
Install a Guest Operating System Manually
Installing a guest operating system in a virtual machine is similar to installing an operating system on a
physical computer. If you do not use Easy Install when you create a virtual machine in the New Virtual
Machine wizard, you must install the guest operating system manually.
You can install a guest operating system from an installer disc or ISO image file. You can also use a PXE
server to install the guest operating system over a network connection. If the host configuration does not
permit the virtual machine to boot from an installer disc, you can create an ISO image file from the
installer disc.
Prerequisites
n
Verify that the operating system is supported. See the online VMware Compatibility Guide on the
VMware Web site.
n
See the VMware Guest Operating System Installation Guide for information on the guest operating
system that you are installing.
Procedure
1
2
If you are installing the guest operating system from an installer disc, configure the virtual machine to
use a physical CD-ROM or DVD drive and configure the drive to connect at power on.
a
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
b
On the Hardware tab, select CD/DVD drive.
c
Select Connect at power on.
d
Select Use physical drive and select a the drive.
e
Click OK to save your changes.
If you are installing the guest operating system from an ISO image file, configure the CD/DVD drive in
the virtual machine to point to the ISO image file and configure the drive to connect at power on.
a
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
b
On the Hardware tab, select CD/DVD drive.
c
Select Connect at power on.
VMware, Inc.
32
Using VMware Workstation Player for Windows
d
Select Use ISO image file and browse to the location of the ISO image file.
e
Click OK to save your changes.
3
If you are installing the guest operating system from an installer disc, insert the disc in the CD-ROM
or DVD drive.
4
Power on the virtual machine.
5
Follow the installation instructions provided by the operating system vendor.
6
If the operating system consists of multiple installer discs and you are prompted to insert the next
disc, insert the next disc in the physical drive.
7
If the operating system consists of multiple ISO image files, select the image file for the next CD.
8
a
Select Player > Removable Devices > CD/DVD > Disconnect and disconnect from the current
ISO image file..
b
Select Player > Removable Devices > CD/DVD > Settings and select the next ISO image file.
c
Select Connected and click OK.
Use the standard tools in the operating system to configure its settings.
What to do next
Install VMware Tools. You should install VMware Tools before you activate the license for the operating
system. See Installing VMware Tools.
Importing Virtual Machines
You can import virtual machines in other formats into Workstation Player.
Import a Windows XP Mode Virtual Machine
You can import a Windows XP Mode virtual machine and run it in Workstation Player. When you import a
Windows XP Mode virtual machine, Workstation Player creates a new virtual machine in VMware runtime
(.vmx) format.
You can power on only one Windows XP Mode virtual machine at a time in Workstation Player. If you
move a Windows XP Mode virtual machine to another host system, it becomes a new virtual machine and
you must activate it.
Note Changes made to the original Windows XP Mode virtual machine through Virtual PC do not affect
the virtual machine imported in Workstation Player.
Prerequisites
n
Verify that the Windows 7 Professional, Enterprise, or Ultimate edition operating system is running on
the host system. Importing Windows XP Mode virtual machines is not supported on Linux host
systems or on host systems that are running other versions of Windows.
n
Download and install the Windows XP Mode virtual machine on the host system.
VMware, Inc.
33
Using VMware Workstation Player for Windows
Procedure
1
Select File > Open and browse to the virtual machine configuration (.vmc) file.
If you have never virtualized a physical machine or imported a third-party virtual machine in
Workstation Player, you need to download and install VMware vCenter Converter Standalone. After
the VMware vCenter Converter Standalone installation is finished, you must restart the import.
2
Type a name for the new virtual machine, type or browse to the directory for the virtual machine files,
and click Import.
Workstation Player begins importing the Windows XP Mode virtual machine.
After Workstation Player successfully imports the Windows XP Mode virtual machine, a new virtual
machine appears in the virtual machine library.
Import an Open Virtualization Format Virtual Machine
You can import an Open Virtualization Format (OVF) virtual machine and run it in Workstation Player.
Workstation Player converts the virtual machine from OVF format to VMware runtime (.vmx) format. You
can import both .ovf and .ova files.
OVF is a platform-independent, efficient, extensible, and open packaging and distribution format for virtual
machines. For example, you can import OVF virtual machines exported from VMware Fusion™ or Oracle
VM VirtualBox into Workstation Player. You can import OVF 1.x files only.
You can also use the standalone OVF Tool to convert an OVF virtual machine to VMware runtime format.
The standalone version of the OVF Tool is installed in the Workstation Player installation directory under
OVFTool. See the OVF Tool User Guide on the VMware Web site for information on using the OVF Tool.
Procedure
1
In Workstation Player, select Player > File > Open.
2
Browse to the .ovf or .ova file and click Open.
3
Type a name for the virtual machine, type or browse to the directory for the virtual machine files, and
click Import.
Workstation Player performs OVF specification conformance and virtual hardware compliance
checks. A status bar indicates the progress of the import process.
4
If the import fails, click Retry to try again, or click Cancel to cancel the import.
If you retry the import, Workstation Player relaxes the OVF specification conformance and virtual
hardware compliance checks and you might not be able to use the virtual machine in
Workstation Player.
After Workstation Player successfully imports the OVF virtual machine, the virtual machine appears in the
virtual machine library.
VMware, Inc.
34
Using VMware Workstation Player for Windows
Import a VMware vCenter Server Appliance
®
You can import a VMware vCenter Server Appliance™ and run it in Workstation Player. You can import
both .ovf and .ova files.
Procedure
1
In Workstation Player, select Player > File > Open.
2
Browse to the vCenter Server Appliance .ovf or .ova file and click Open.
3
Select the license agreement check box and click Next.
4
Continue through the wizard, responding to prompts and clicking through to the next dialog box.
5
If the import fails, click Retry to try again, or click Cancel to cancel the import.
If you retry the import, Workstation Player relaxes the OVF specification conformance and virtual
hardware compliance checks and you might not be able to use the virtual machine in
Workstation Player.
After Workstation Player successfully imports the vCenter Server Appliance as a virtual machine, the
virtual machine appears in the virtual machine library. Workstation Player then powers on the virtual
machine and applies the vCenter Server Appliance configuration.
Import a Windows Virtual PC Virtual Machine
You can import a Windows Virtual PC virtual machine and run it in Workstation Player. Workstation Player
converts the virtual machine from Virtual PC (.vmc) format to VMware runtime (.vmx) format. This feature
is supported only on Windows host systems.
Prerequisites
Download and install the Virtual PC virtual machine on the Windows host system.
Procedure
1
Select Player > File > Open.
If you have never virtualized a physical machine or imported a third-party virtual machine in
Workstation Player, you need to download and install VMware vCenter Converter Standalone. After
the VMware vCenter Converter Standalone installation is finished, you must restart the import.
2
Browse to the .vmc file and click Open.
3
Type a name for the virtual machine, type or browse to the directory for the virtual machine files, and
click Import.
After Workstation Player successfully imports the Virtual PC virtual machine, the virtual machine appears
in the virtual machine library.
VMware, Inc.
35
Installing and Upgrading
VMware Tools
5
Installing VMware Tools is part of the process of creating a new virtual machine. Upgrading VMware Tools
is part of the process of keeping virtual machines up to current standards.
For the best performance and latest updates, install or upgrade VMware Tools to match the version of
Workstation Player that you are using. Other compatibility options are also available.
For more information about using VMware Tools, see Installing and Configuring VMware Tools at
http://www.vmware.com/pdf/vmware-tools-installation-configuration.pdf .
This chapter includes the following topics:
n
Installing VMware Tools
n
Upgrading VMware Tools
n
Configure Software Update Preferences
n
Configure VMware Tools Updates for a Specific Virtual Machine
n
Manually Installing and Upgrading VMware Tools
n
Starting the VMware User Process Manually If You Do Not Use a Session Manager
n
Uninstalling VMware Tools
Installing VMware Tools
Installing VMware Tools is part of the process of creating a new virtual machine, and upgrading VMware
Tools is part of the process of keeping your virtual machine up to current standards. Although your guest
operating systems can run without VMware Tools, many VMware features are not available until you
install VMware Tools. When you install VMware Tools, the utilities in the suite enhance the performance of
the guest operating system in your virtual machine and improve the management of your virtual
machines.
For information about creating virtual machines, see the documentation for the applicable VMware
product.
The installers for VMware Tools are ISO image files. The CD-ROM in your guest operating system detects
the ISO image file. Each type of guest operating system, including Windows, Linux, and Mac OS X, has
an ISO image file. When you select the command to install or upgrade VMware Tools, the virtual
machine’s first virtual CD-ROM disk drive temporarily connects to the VMware Tools ISO file for your
guest operating system.
VMware, Inc.
36
Using VMware Workstation Player for Windows
You can use the Windows Easy Install or Linux Easy Install feature to install VMware Tools as soon as the
operating system is finished installing.
The most recent versions of the ISO files are stored on a VMware Web site. When you select the
command to install or upgrade VMware Tools, the VMware product determines whether it has
downloaded the most recent version of the ISO file for the specific operating system. If the latest version
has not been downloaded or if no VMware Tools ISO file for that operating system has ever been
downloaded, you are prompted to download the file.
n
VMware Tools installer from windows.iso automatically detects the windows version. It does not
proceed with the installation on guest operating systems earlier than Windows Vista.
n
VMware Tools installer from winPreVista.iso does not proceed with the installation on Windows
Vista and later.
n
VMware Tools installer from linux.iso does not proceed with installation on Linux guest operating
system versions earlier than RHEL5, SLES 11, Ubuntu 10.04, and other Linux distributions with
glibc version earlier than 2.5.
n
VMware Tools installer from darwinPre15.iso does not proceed with installation on MAC OS X
guest operating systems versions 10.11 or later.
n
VMware Tools installer from darwin.iso does not proceed with installation on MAC OS X guest
operating systems versions earlier than 10.11.
The installation procedure varies, depending on the operating system. For information about installing or
upgrading VMware Tools on your guest operating systems, see the topic about upgrading virtual
machines in the Virtual Machine Administration Guide. For general instructions about installing VMware
Tools, see the VMware Knowledge base article http://kb.vmware.com/kb/1014294.
Upgrading VMware Tools
You can upgrade VMware Tools manually, or you can configure virtual machines to check for and install
newer versions of VMware Tools.
The guest operating system checks the version of VMware Tools when you power on a virtual machine.
The status bar of your virtual machine displays a message when a new version is available.
For vSphere virtual machines,
A newer version of Tools is available for this VM
is displayed when the installed version of VMware Tools is out of date.
In Windows virtual machines, you can set VMware Tools to notify you when an upgrade is available. If this
notification option is enabled, the VMware Tools icon in the Windows taskbar includes a yellow caution
icon when a VMware Tools upgrade is available.
To install a VMware Tools upgrade, you can use the same procedure that you used for installing VMware
Tools the first time. Upgrading VMware Tools means installing a new version.
VMware, Inc.
37
Using VMware Workstation Player for Windows
For Windows and Linux guest operating systems, you can configure the virtual machine to automatically
upgrade VMware Tools. Although the version check is performed when you power on the virtual machine,
on Windows guest operating systems, the automatic upgrade occurs when you power off or restart the
virtual machine. The status bar displays the message Installing VMware Tools ... when an
upgrade is in progress. The procedure is mentioned below.
Note Upgrading VMware Tools on Windows guest operation systems automatically installs the WDDM
graphics drivers. The WDDM graphics driver allows the sleep mode available in guest OS power settings
to adjust the sleep options. For example, you can use the sleep mode setting Change when the
computer sleeps to configure your guest OS to automatically go to sleep mode after a certain time or
prevent your guest OS from automatically switching to sleep mode after being idle for some time.
Some features in a particular release of a VMware product might depend on installing or upgrading to the
version of VMware Tools included in that release. Upgrading to the latest version of VMware Tools is not
always necessary. Newer versions of VMware Tools are compatible with several host versions. To avoid
unnecessary upgrades, evaluate whether the added features and capabilities are necessary for your
environment.
Configure Software Update Preferences
You can configure Workstation Player to automatically download software updates, including new
versions of VMware Tools. When you select automatic software updates, Workstation Player always
includes the latest support for guest operating systems and virtual machines always have the latest
version of VMware Tools.
Procedure
1
Select Player > File > Preferences.
2
Select when Workstation Player checks for software updates.
You can select one, both, or neither option. If you deselect all of the software update options,
automatic software updates are disabled.
Option
Description
Check for product updates on startup
Checks for new versions of Workstation Player available to download and install
when you start Workstation Player. This option is enabled by default. If you do not
select this option, your system does not get the latest product updates.
Check for software components as
needed
When a software component is required, for example, when you install VMware
Tools, Workstation Player checks for a new version of the component.
Download All Components Now
Immediately download all of the available software components to the host
system. This option is useful if you are planning to use the virtual machine at a
later time when you do not have access to the Internet.
VMware, Inc.
38
Using VMware Workstation Player for Windows
3
If you use a proxy server to connect to the VMware Update Server, click Connection Settings to
configure the proxy settings.
Option
Description
No proxy
Select this option if you do not use a proxy server. This is the default setting.
Windows proxy settings
Workstation Player uses the host proxy settings from the Connections tab in the
Internet Options control panel to access the VMware Update Server.
a
Click Internet Options to set the guest connection options.
b
Type a user name and password to use for proxy server authentication.
If you leave either the Username or the Password text box blank,
Workstation Player does not use either value.
Manual proxy settings
a
Select HTTP or SOCKS, specify the proxy server address and designate a
port number to access the VMware Update Sever.
b
Type a username and password to use for proxy authentication.
If you leave either the Username or the Password text box blank,
Workstation Player does not use either value (Windows hosts) or it uses the
username and password set in the gnome settings (Linux hosts).
4
Click OK to save your changes.
Configure VMware Tools Updates for a Specific Virtual
Machine
You can configure virtual machines that have Windows or Linux guest operating systems to update
VMware Tools automatically. For other guest operating systems, you must manually update VMware
Tools.
Automatic VMware Tools updates are supported for versions of VMware Tools included in Workstation 5.5
and later virtual machines only. Automatic updates are not supported for versions of VMware Tools
included in virtual machines created with VMware Server 1.x.
Important If you update VMware Tools in a Windows virtual machine that was created with Workstation
4 or 5.x, some new components are not installed. To install the new components, you must uninstall the
old version of VMware Tools and install the new version of VMware Tools.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select VMware Tools.
VMware, Inc.
39
Using VMware Workstation Player for Windows
3
4
Select a VMware Tools update setting.
Option
Description
Update manually (do nothing)
You must update VMware Tools manually. The virtual machine status bar
indicates when a new version of VMware Tools is available.
Update automatically
VMware Tools is updated automatically. The virtual machine status bar indicates
when an update is in progress. If you are logged in to a Windows guest, a restart
prompt appears after the update is complete. If you are not logged in, the
operating system restarts without prompting. An auto-update check is performed
as part of the boot sequence when you power on the virtual machine. If the virtual
machine was suspended and you resume it or restore it to a snapshot during the
boot sequence before this check, the automatic update occurs as planned. If you
resume the virtual machine or restore it to a snapshot after the check, the
automatic update does not occur.
Use application default (currently
Use the default VMware Tools update behavior. The default behavior is set in
update manually)
Workstation Player preferences.
Click OK to save your changes.
Manually Installing and Upgrading VMware Tools
You can manually install or upgrade VMware Tools on Windows, Linux, NetWare, Solaris, and FreeBSD
virtual machines.
If you are installing VMware Tools in a number of Windows virtual machines, you can automate its
installation by using the VMware Tools setup.exe at a command prompt in the guest operating system.
See Installing and Configuring VMware Tools at
http://www.vmware.com/pdf/vmware-tools-installation-configuration.pdf for more information.
Manually Installing VMware Tools on a Windows Virtual Machine
Guest operating system Windows 2000 and earlier, Windows XP, Windows Server 2003, Windows Vista,
and later support VMware Tools.
Prerequisites
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
If you connected the virtual machine’s virtual CD/DVD drive to an ISO image file when you installed
the operating system, change the setting so that the virtual CD/DVD drive is configured to autodetect
a physical drive.
The autodetect setting enables the virtual machine's first virtual CD/DVD drive to detect and connect
to the VMware Tools ISO file for a VMware Tools installation. This ISO file is detected as a physical
CD by your guest operating system. Use the virtual machine settings editor to set the CD/DVD drive
to autodetect a physical drive.
VMware, Inc.
40
Using VMware Workstation Player for Windows
n
Log in as an administrator unless you are using an older Windows operating system. Any user can
install VMware Tools in a Windows 95, Windows 98, or Windows ME guest operating system. For
operating systems later than these, you must log in as an administrator.
Procedure
1
On the host, from the Workstation Player menu bar, select Player > Manage > Install VMware
Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
If you are installing VMware Tools for the first time, click OK on the Install VMware Tools information
page.
If autorun is enabled for the CD-ROM drive on the guest operating system, the VMware Tools
installation wizard starts.
If autorun is not enabled, to manually launch the wizard, click Start > Run and enter D:\setup.exe,
where D: is your first virtual CD-ROM drive. Use D:\setup64.exe for 64-bit Windows guest
operating system.
3
Follow the on-screen prompts.
4
If the New Hardware wizard appears, follow the prompts and accept the defaults.
Note If you are installing a beta or RC version of VMware Tools and you see a warning that a
package or driver is not signed, click Install Anyway to complete the installation.
5
When prompted, reboot the virtual machine.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Manually Installing VMware Tools on a Linux Virtual Machine
For Linux virtual machines, you manually install VMware Tools from the command line. For later Linux
distributions, use the integrated open-vm-tools version.
Prerequisites
For more information on OS compatibility for open-vm-tools, see the VMware Compatibility Guide at
https://www.vmware.com/resources/compatibility/search.php.
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating
system.
VMware, Inc.
41
Using VMware Workstation Player for Windows
Procedure
1
On the host, from the Workstation Player menu bar, select Player > Manage > Install VMware
Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
In the virtual machine, open a terminal window.
3
Run the mount command with no arguments to determine whether your Linux distribution
automatically mounted the VMware Tools virtual CD-ROM image.
If the CD-ROM device is mounted, the CD-ROM device and its mount point are listed in a manner
similar to the following output:
/dev/cdrom on /mnt/cdrom type iso9660 (ro,nosuid,nodev)
4
If the VMware Tools virtual CD-ROM image is not mounted, mount the CD-ROM drive.
a
If a mount point directory does not already exist, create it.
mkdir /mnt/cdrom
Some Linux distributions use different mount point names. For example, on some distributions
the mount point is /media/VMware Tools rather than /mnt/cdrom. Modify the command to
reflect the conventions that your distribution uses.
b
Mount the CD-ROM drive.
mount /dev/cdrom /mnt/cdrom
Some Linux distributions use different device names or organize the /dev directory differently. If
your CD-ROM drive is not /dev/cdrom or if the mount point for a CD-ROM is not /mnt/cdrom,
modify the command to reflect the conventions that your distribution uses.
5
Change to a working directory, for example, /tmp.
cd /tmp
6
(Optional) Delete any previous vmware-tools-distrib directory before you install VMware Tools.
The location of this directory depends on where you placed it during the previous installation. Often
this directory is placed in /tmp/vmware-tools-distrib.
7
List the contents of the mount point directory and note the file name of the VMware Tools tar installer.
ls mount-point
8
Uncompress the installer.
tar zxpf /mnt/cdrom/VMwareTools-x.x.x-yyyy.tar.gz
The value x.x.x is the product version number, and yyyy is the build number of the product release.
VMware, Inc.
42
Using VMware Workstation Player for Windows
9
If necessary, unmount the CD-ROM image.
umount /dev/cdrom
If your Linux distribution automatically mounted the CD-ROM, you do not need to unmount the image.
10 Run the installer and configure VMware Tools as a root user
cd vmware-tools-distrib
sudo ./vmware-install.pl
Usually, the vmware-config-tools.pl configuration file runs after the installer file finishes running.
If you attempt to install a tar installation over an RPM installation, or the reverse, the installer detects
the previous installation and must convert the installer database format before continuing.
Note For newer Linux distributions, users are prompted to choose the integrated open-vm-tools.
11 Follow the prompts to accept the default values, if appropriate for your configuration.
12 Follow the instructions at the end of the script.
Depending on the features you use, these instructions can include restarting the X session, restarting
networking, logging in again, and starting the VMware User process. You can alternatively reboot the
guest operating system to accomplish all these tasks.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Manually Installing VMware Tools on a NetWare Virtual Machine
For NetWare virtual machines, you manually install or upgrade VMware Tools by using the command line.
Prerequisites
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating
system.
Note VMware Tools 10.1.0 does not support the NetWare operating system.
Procedure
1
On the host, from the Workstation Player menu bar, select Player > Manage > Install VMware
Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
VMware, Inc.
43
Using VMware Workstation Player for Windows
2
Load the CD-ROM driver so that the virtual CD-ROM device mounts the ISO image as a volume.
Operating System
Command
NetWare 6.5
LOAD CDDVD
NetWare 6.0 or NetWare 5.1
LOAD CD9660.NSS
NetWare 4.2 (not available in vSphere)
load cdrom
When the installation finishes, the message VMware Tools for NetWare are now running
appears in the Logger Screen for NetWare 6.5 and NetWare 6.0 guest operating systems and in the
Console Screen for NetWare 4.2 and 5.1 operating systems.
3
If the VMware Tools virtual disc (netware.iso) is attached to the virtual machine, right-click the CDROM icon in the status bar of the console window and select Disconnect.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Manually Installing VMware Tools on a Solaris Virtual Machine
For Solaris virtual machines, you manually install or upgrade VMware Tools by using the command line.
Prerequisites
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating
system.
Procedure
1
On the host, from the Workstation Player menu bar, select Player > Manage > Install VMware
Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
In the virtual machine, log in to the guest operating system as root and open a terminal window.
3
If the Solaris volume manager does not mount the CD-ROM under /cdrom/vmwaretools, restart the
volume manager.
/etc/init.d/volmgt stop
/etc/init.d/volmgt start
4
Change to a working directory, for example, /tmp.
cd /tmp
5
Extract VMware Tools.
gunzip -c /cdrom/vmwaretools/vmware-solaris-tools.tar.gz | tar xf -
VMware, Inc.
44
Using VMware Workstation Player for Windows
6
Run the installer and configure VMware Tools.
cd vmware-tools-distrib
./vmware-install.pl
Usually, the vmware-config-tools.pl configuration file runs after the installer file finishes running.
7
Follow the prompts to accept the default values, if appropriate for your configuration.
8
Follow the instructions at the end of the script.
Depending on the features you use, these instructions can include restarting the X session, restarting
networking, logging in again, and starting the VMware User process. You can alternatively reboot the
guest operating system to accomplish all these tasks.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Manually Installing VMware Tools on a FreeBSD Virtual Machine
For FreeBSD virtual machines, you manually install or upgrade VMware Tools by using the command line.
Prerequisites
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating
system.
Procedure
1
On the host, from the Workstation Player menu bar, select Player > Manage > Install VMware
Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
In the virtual machine, log in to the guest operating system as root and open a terminal window.
3
If the distribution does not automatically mount CD-ROMs, mount the VMware Tools virtual CD-ROM
image.
For example, type mount /cdrom.
4
Change to a working directory, for example, /tmp.
cd /tmp
5
Untar the VMware Tools .tar.gz file.
tar zxpf /cdrom/vmware-freebsd-tools.tar.gz
VMware, Inc.
45
Using VMware Workstation Player for Windows
6
If the distribution does not use automounting, unmount the VMware Tools virtual CD-ROM image.
umount /cdrom
7
Run the installer and configure VMware Tools.
cd vmware-tools-distrib
./vmware-install.pl
Usually, the vmware-config-tools.pl configuration file runs after the installer file finishes running.
8
Follow the prompts to accept the default values, if appropriate for your configuration.
9
Follow the instructions at the end of the script.
Depending on the features you use, these instructions can include restarting the X session, restarting
networking, logging in again, and starting the VMware User process. You can alternatively reboot the
guest operating system to accomplish all these tasks.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Starting the VMware User Process Manually If You Do Not
Use a Session Manager
VMware Tools in Linux, Solaris, and FreeBSD guest operating systems uses the VMware user process.
This program implements the fit-guest-to-window and other features.
Normally, this process starts after you configure VMware Tools, log out of the desktop environment, and
log back in. You can invoke the VMware user process by running the vmtoolsd -n vmusr command.
The startup script that you need to modify depends on your system. You must start the process manually
in the following environments:
n
If you run an X session without a session manager. For example, if you use startx to start a desktop
session and do not use xdm, kdm, or gdm.
n
If you are using an older version of GNOME without gdm or xdm.
n
If you are using a session manager or environment that does not support the Desktop Application
Autostart Specification, available from http://standards.freedesktop.org.
n
If you upgrade VMware Tools.
VMware, Inc.
46
Using VMware Workstation Player for Windows
Procedure
u
Start the VMware User process.
Option
Action
Start the VMware User process when
you start an X session.
Add vmtoolsd -n vmusr to the appropriate X startup script, such as
Start the process after a VMware Tools
software upgrade, or if certain features
are not working.
Open a terminal window and type the vmtoolsd -n vmusr command.
the .xsession or .xinitrc file.
Uninstalling VMware Tools
If the upgrade process of VMware Tools is incomplete, you can uninstall and then reinstall the VMware
Tools.
Prerequisites
n
Power on the virtual machine.
n
Log in to the guest operating system.
Procedure
u
Select a method to uninstall VMware Tools.
Operating System
Action
Windows 7, 8, 8.1, or Windows 10
In the guest operating system, select Programs > Uninstall a program.
Windows Vista and Windows Server
2008
In the guest operating system, select Programs and Features > Uninstall a
program.
Windows XP and earlier
In the guest operating system, select Add/Remove Programs.
Linux
Log in as root and enter vmware-uninstall-tools.pl in a terminal window.
Mac OS X, OS X, or macOS
Use the Uninstall VMware Tools application, found in /Library/Application
Support/VMware Tools.
What to do next
Reinstall VMware Tools.
VMware, Inc.
47
Starting and Stopping Virtual
Machines in Workstation Player
6
You can use Workstation Player to start and stop virtual machines on the host system.
When you start a virtual machine, the guest operating system starts and you can interact with the virtual
machine. You can power off, reset, and suspend virtual machines.
This chapter includes the following topics:
n
Start a Virtual Machine in Workstation Player
n
Start an Encrypted Virtual Machine in Workstation Player
n
Download a Virtual Appliance in Workstation Player
n
Power Off a Virtual Machine in Workstation Player
n
Remove a Virtual Machine from the Library in Workstation Player
n
Use Ctrl+Alt+Delete to Shut Down a Guest
n
Suspend and Resume a Virtual Machine in Workstation Player
n
Reset a Virtual Machine in Workstation Player
n
Enable Autologon in a Windows Virtual Machine
n
Set Workstation Player Preferences for Virtual Machine Closing Behavior
Start a Virtual Machine in Workstation Player
You can start a virtual machine from the Workstation Player window.
Prerequisites
Verify that the virtual machine files are accessible to the host system.
Procedure
1
If the virtual machine does not appear in the library, select Player > File > Open.
2
Browse to and select the virtual machine configuration (.vmx) file, and click Open.
The virtual machine appears in the library.
3
Select the virtual machine in the library and select Player > Power > Power On.
VMware, Inc.
48
Using VMware Workstation Player for Windows
4
Click anywhere inside the virtual machine console to give the virtual machine control of the mouse
and keyboard on the host system.
5
Log in to the guest operating system.
Start an Encrypted Virtual Machine in Workstation Player
An encrypted virtual machine is a virtual machine that has been secured from unauthorized use. A lock
icon appears next to an encrypted virtual machine in the virtual machine library.
For information about using Workstation Player to open a Horizon FLEX virtual machine, see the VMware
Horizon FLEX Client User Guide.
Note You cannot create encrypted virtual machines in Workstation Player. You can create encrypted
virtual machines by using only VMware Workstation 7.x or VMware Fusion 7.x and later.
Prerequisites
Obtain the encryption password for the virtual machine.
Procedure
1
Select the virtual machine in the library and select Player > Power > Power On.
2
Type the encryption password.
3
Click Continue to start the virtual machine.
Download a Virtual Appliance in Workstation Player
You can download a virtual appliance in Workstation Player. A virtual appliance is a prebuilt,
preconfigured, and ready-to-run software application that is packaged with the operating system in a
virtual machine.
Procedure
u
Select Player > File > Download a Virtual Appliance.
A Web browser opens to the Virtual Appliance Marketplace page on the VMware Web site. You can
browse to and download virtual appliances from this page.
Power Off a Virtual Machine in Workstation Player
As with physical computers, you should shut down a guest operating system before you power off a
virtual machine.
VMware, Inc.
49
Using VMware Workstation Player for Windows
Procedure
n
To shut down the guest operating system, shut down the operating system as you would if you were
using a physical machine.
When the guest operating system shuts down, the virtual machine is powered off and
Workstation Player exits.
n
To power off a virtual machine without shutting down the guest operating system, select Player >
Power > Power Off.
If soft power operations are configured for the virtual machine when the virtual machine is first
created, Power Off Guest appears in the menu instead of Power Off.
Remove a Virtual Machine from the Library in
Workstation Player
When you open a virtual machine in Workstation Player, it is added to the virtual machine library. You can
remove a virtual machine that you are not using from the library.
Removing a virtual machine from the library does not delete the virtual machine or any of its files from the
host file system. The virtual machine is removed only from the library. If you open the virtual machine
again, the virtual machine is added back to the library.
Prerequisites
Power off the virtual machine.
Procedure
u
Select the virtual machine, right-click, and select Remove VM from the Library.
The virtual machine is removed from the library without any confirmation.
Use Ctrl+Alt+Delete to Shut Down a Guest
You can use the Ctrl+Alt+Delete key sequence to shut down or log off of a guest operating system.
Prerequisites
Power on the virtual machine.
Procedure
n
Select the virtual machine and select Player > Send Ctrl+Alt+Delete.
This option is the same as pressing Ctrl+Alt+Delete on your keyboard. On Windows hosts, using the
physical keyboard to press Ctrl+Alt+Delete might send the command to the host operating system
and the virtual machine, even when Workstation Player has control of input.
VMware, Inc.
50
Using VMware Workstation Player for Windows
n
If the command is received by both the host operating system and the virtual machine, press Ctrl+Alt
+Ins on the keyboard.
The command is received solely by the virtual machine and shuts down or logs out of the guest
operating system.
Suspend and Resume a Virtual Machine in
Workstation Player
Suspending a virtual machine saves its current state. When you resume the virtual machine, applications
that were running before the virtual machine was suspended resume in their running state and their
content is unchanged.
How quickly the suspend and resume operations perform depends on how much data changed after you
started the virtual machine. The first suspend typically takes longer than subsequent suspend operations.
Procedure
n
To suspend a virtual machine, select Player > Power > Suspend and click Yes to confirm.
If soft power operations are configured for the virtual machine when the virtual machine is first
created, Suspend Guest appears in the menu instead of Suspend.
Workstation Player returns the virtual machine to the library in the Suspended state.
n
To resume a suspended virtual machine, select the virtual machine and select Player > Power >
Power On.
n
To set the Workstation Player preferences to suspend the virtual machine when you close the virtual
machine window, select Player > File > Preferences and then select Suspend the virtual machine.
Reset a Virtual Machine in Workstation Player
You can reset a virtual machine in Workstation Player. Resetting a virtual machine causes it to abruptly
power off and restart.
Prerequisites
n
Power on the virtual machine.
n
Verify that the virtual machine is in a safe state. Resetting a virtual machine can damage data. When
possible, shut down the virtual machine with its operating system.
Procedure
u
Select Player > Power > Reset.
If soft power operations are configured for the virtual machine in Workstation Player, Reset Guest
appears in the menu instead of Reset.
VMware, Inc.
51
Using VMware Workstation Player for Windows
Enable Autologon in a Windows Virtual Machine
With Autologon, you can save your login credentials and bypass the login dialog box when you power on
a Windows virtual machine. The guest operating system securely stores the password.
Use the Autologon feature if you restart the guest operating system frequently and want to avoid entering
your login credentials. You can also use the Autologon feature to grant users access to the guest
operating system without sharing your password.
Prerequisites
n
Verify that the guest operating system is Windows 2000 or later.
n
Verify that you have an existing user account to enable Autologon. The account must be a local
machine account, not a domain account.
n
Verify that the latest version of VMware Tools is running in the guest operating system.
n
Power on the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select Autologon.
3
Click Enable, type your login credentials, and click OK.
If you type an incorrect or expired password, you must type your login credentials when you power on
the virtual machine.
4
Click OK to save your changes.
When you enable Autologon or change your login credentials, the Autologon settings are saved
immediately. Clicking Cancel in the Virtual Machine Settings dialog box does not affect the changes
applied to the Autologon settings.
Set Workstation Player Preferences for Virtual Machine
Closing Behavior
You can configure how virtual machines behave when you close them.
Procedure
1
Select Player > File > Preferences.
VMware, Inc.
52
Using VMware Workstation Player for Windows
2
Select how Workstation Player behaves when you close a virtual machine.
You can select one, both, or neither option.
3
4
Option
Description
Confirm before closing a virtual
machine
Confirm whether you intend to exit Workstation Player or click Cancel to continue
using Workstation Player
Return to the VM Library after closing a
virtual machine
Workstation Player either suspends or powers off the virtual machine and returns
it to the virtual machine library. From the library, you can either open another
virtual machine or edit the virtual machine settings.
Select whether Workstation Player suspends or powers off a virtual machine when you close it.
Option
Description
Suspend the virtual machine
Workstation Player suspends the virtual machine. The next time you start
Workstation Player, the virtual machine resumes operation from the point where it
was suspended.
Power off the virtual machine
Workstation Player powers off the virtual machine. The next time you start
Workstation Player, the virtual machine starts from a powered-off state and the
guest operating system starts.
Click OK to save your changes.
VMware, Inc.
53
Changing the Virtual Machine
Display
7
You can change the way Workstation Player displays virtual machines and virtual machine applications.
You can use full screen mode to make the virtual machine display fill the screen and use multiple
monitors.
You can also use Unity mode to display applications directly on the host system desktop.
This chapter includes the following topics:
n
Configure Display Settings for a Virtual Machine
n
Use Full Screen Mode in Workstation Player
n
Use Unity Mode
n
Use Multiple Monitors for One Virtual Machine in Workstation Player
Configure Display Settings for a Virtual Machine
You can specify monitor resolution settings, configure multiple monitors, and select accelerated graphics
capabilities for a virtual machine. You can use the multiple-monitor feature when the virtual machine is in
full screen mode.
For Windows guests, to use DirectX 9 accelerated graphics, the guest operating system must be
Windows XP or later. To use DirectX 10 accelerated graphics, the guest operating system must be
Windows Vista or later.
Prerequisites
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that the guest operating system in the virtual machine is Windows XP or higher, or Linux.
n
If you plan to use DirectX 9 or DirectX 10 accelerated graphics, prepare the host system. See
Prepare the Host System to Use 3D Accelerated Graphics.
n
If you are using Windows 8.1 (Update 2) or Windows 10, Workstation Player detects the DPI on each
monitor and scales the virtual machine to match the DPI on the host.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
VMware, Inc.
54
Using VMware Workstation Player for Windows
2
On the Hardware tab, select Display.
3
(Optional) To run applications that use DirectX 9 or DirectX 10 accelerated graphics, select
Accelerate 3D graphics.
4
Specify whether host settings determine the number of monitors.
5
Option
Description
Use host setting for monitors
When you select this setting, the SVGA driver uses a maximum bounding box
width of 7680 and a maximum bounding box height of 4320. The virtual machine
uses the number of monitors on the host system. The guest monitors cannot
exceed the maximum bounding box that the SVGA driver uses, 7680x4320. You
should select this setting in most cases.
Specify monitor settings
Set the number of monitors that the virtual machine will see, regardless of the
number of monitors on the host system. This setting is useful if you use a
multimonitor host system and you need to test in a virtual machine that has only
one monitor. It is also useful if you are developing a multimonitor application in a
virtual machine and the host system has only one monitor. After you power on the
virtual machine, the guest operating system sees the number of monitors that you
specified. Select a resolution from the list or type a setting that has the format
width x height, where width and height are the number of pixels.
(Optional) Select the maximum amount of guest memory that can be used for graphics memory using
the drop down menu. The default value of video memory varies by guest OS.
Guest OS
Default
Windows 7 and later
1 GB
Windows XP and earlier
512 MB
Linux
768 MB
Note If you manually edited the .vmx file to change the memory size for the virtual machine, the
value you entered in the .vmx file is displayed, labeled Custom.
6
To enable display scaling for the virtual machine, select the Automatically adjust user interface
size in the virtual machine check box.
7
Click OK to save your changes.
Use Full Screen Mode in Workstation Player
In full screen mode, the virtual machine display fills the screen, so that you cannot see the borders of the
Workstation Player window.
Prerequisites
n
Power on the virtual machine.
VMware, Inc.
55
Using VMware Workstation Player for Windows
n
Verify that the guest operating system display mode is larger than the host system display mode. If
the guest operating system display mode is smaller than the host system display mode, you might not
be able to enter full screen mode. If you cannot enter full screen mode, add the line
mks.maxRefreshRate=1000 to the virtual machine configuration (.vmx) file.
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
If you are running the virtual machine in full screen mode on a laptop, configure the guest operating
system to report battery information. See Report Battery Information in the Guest.
Procedure
n
To enter full screen mode, select the virtual machine and select Player > Full Screen.
n
To hide the full screen toolbar and menus while you are using full screen mode, click the push pin
icon and move the pointer off of the toolbar.
This action unpins the toolbar. The toolbar slides up to the top of the monitor and disappears. To
display the toolbar again, point to the top of the screen until the toolbar appears.
n
To exit full screen mode and return to windowed mode, select Player > Full Screen from the full
screen toolbar. The check mark next to Full Screen is removed.
Report Battery Information in the Guest
If you run a virtual machine on a laptop in full screen mode, configure the option to report battery
information in the guest so that you can determine when the battery is running low.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select Power.
3
Select Report battery information to guest.
4
Click OK to save your changes.
Use Unity Mode
You can switch virtual machines that have Windows XP or later guest operating systems to Unity mode to
display applications directly on the host system desktop.
In Unity mode, virtual machine applications appear on the host system desktop, you can use the virtual
machine Start or Applications menu from the host system, and the virtual machine console view is
hidden. Items for open virtual machine applications appear on the host system taskbar in the same way
as open host applications.
VMware, Inc.
56
Using VMware Workstation Player for Windows
On host system and virtual machine applications that are displayed in Unity mode, you can use keyboard
shortcuts to copy, cut, and paste images, plain text, formatted text, and email attachments between
applications. You can also drag and drop and copy and paste files between the host system and the guest
operating system.
If you save a file or attempt to open a file from an application in Unity mode, the file system you see is the
file system inside the virtual machine. You cannot open a file from the host operating system or save a file
to the host operating system.
For some guest operating systems, application windows in Unity mode can appear only on the monitor
that is set as the primary display when you have multiple monitors. If the host and guest operating
systems are Windows XP or later, the application windows can appear on additional monitors.
Unity mode is not available in full screen mode on Windows.
Prerequisites
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that the guest operating system is Windows XP or later.
n
Power on the virtual machine.
n
If you are entering Unity mode, open applications in the virtual machine to use in Unity mode.
Procedure
n
To enter Unity mode, select Player > Unity.
The console view in the Workstation Player window is hidden, and open applications appear in
application windows on the host system desktop. A check mark appears next to Unity in the menu.
n
To display the virtual machine Start menu on a Windows host system, point to the Start menu on a
Windows host system.
n
To navigate between multiple Start or Applications menus when multiple virtual machines are in
Unity mode, press the arrow keys, Tab, or Shift+Tab to cycle through the virtual machine menus and
press Enter and the spacebar to select a virtual machine.
n
To exit Unity mode, display the Workstation Player window and click Exit Unity in the virtual machine
console view.
Set Preferences for Unity Mode
You can set preferences for Unity mode to control whether that the virtual machine Start or Applications
menu is available from the host system desktop. You can also select the border color that appears around
applications that run in Unity mode when they appear on the host system desktop.
When you use the virtual machine Start or Applications menu from the host system desktop, you can
start applications in the virtual machine that are not open in Unity mode. If you do not enable this feature,
you must exit Unity mode to display the virtual machine Start or Applications menu in the console view.
VMware, Inc.
57
Using VMware Workstation Player for Windows
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options, select Unity.
3
Select a Unity window decoration option.
Option
Description
Show borders
Set a window border that identifies the application as belonging to the virtual
machine rather than to the host computer.
Show badges
Display a logo in the title bar.
Use a custom color in window borders
Use a custom color in window borders to help distinguish between the application
windows that belong to various virtual machines. For example, you can set the
applications for one virtual machine to have a blue border and set the applications
for another virtual machine to have a yellow border. On Windows hosts, click
Choose color to use the color chooser.
4
To control whether the virtual machine Start or Application menu available on the host system
desktop, select or deselect Enable applications menu.
5
Click OK to save your changes.
Create Virtual Machine Application Shortcuts on the Host in Unity
Mode
You can create a shortcut for a virtual machine application on the host system in Unity mode.
You open the application in the same way that you open an application on the host system. You can open
a virtual machine application shortcut from the host system even when the virtual machine is powered off
or suspended.
Prerequisites
n
Verify that the virtual machine is configured to display the virtual machine Start or Application menu
on the host system desktop. See Set Preferences for Unity Mode.
n
Verify that the latest version of VMware Tools is running in the guest operating system.
n
Power on the virtual machine.
Procedure
1
To enter Unity mode, select Player > Unity.
The console view in the Workstation Player window is hidden, and open applications appear in
application windows on the host system desktop. A check mark appears next to Unity in the menu.
2
Point to the Start button to display the virtual machine Start menu on the host system desktop, click
the Start menu, and select the application.
3
Right-click the application and select Create Shortcut on Desktop, or drag the application to the
host system.
VMware, Inc.
58
Using VMware Workstation Player for Windows
Use Multiple Monitors for One Virtual Machine in
Workstation Player
If the host system has multiple monitors, you can configure a virtual machine to use multiple monitors.
You can use the multiple-monitor feature when the virtual machine is in full screen mode.
Prerequisites
n
Configure multiple monitors for one virtual machine. See Configure Display Settings for a Virtual
Machine.
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that the guest operating system is Windows XP, Windows Vista, Windows 7, Windows 8,
Windows 8.1, Windows 10, or Linux.
n
On the host system, verify that the left-most monitor is not placed lower than any other monitor in the
display topology. When you enter full screen mode, the monitor that contains the window cannot be
lower than another monitor.
Procedure
1
Power on the virtual machine and click the maximize button.
2
On the full screen toolbar, click the Cycle multiple monitors button.
On a Windows host, you can mouse over a button on the toolbar to see its name.
If your virtual machine supports more than two monitors, use the Cycle multiple monitors button to
select a configuration with more than two monitors. The monitor in which the virtual machine entered
full screen mode is marked with an asterisk.
The guest operating system desktop extends to the additional monitor or monitors.
3
If the host system has more than two monitors and you want the virtual machine to use all of the
monitors, click the Cycle multiple monitors button again.
The order in which the monitors are used depends on the order in which the monitors were added to
the host operating system. If you continue to click the button, you return to fewer monitors.
Limitations for Multiple Monitors
The use of more than two monitors with a virtual machine has certain limitations.
n
If you attempt to use more than two monitors with a virtual machine, your virtual machine must
support more than two monitors for this feature to function.
n
More than two monitors is supported on Windows and Linux host and guest operating systems.
n
Windows XP guests support more than three monitors. However, only three monitors can be in use
by a Windows XP guest at one time. If more than three monitors are connected to a Windows XP
guest, use the Cycle multiple monitors button to cycle through the monitors to the configuration you
want to use.
VMware, Inc.
59
Using Removable Devices and
Printers in Virtual Machines
8
You can connect and disconnect removable devices in a virtual machine. You can also print from a virtual
machine to any printer available to the host computer without having to install additional drivers in the
virtual machine.
This chapter includes the following topics:
n
Use a Removable Device in a Virtual Machine
n
Connecting USB Devices to Virtual Machines
n
Add a Host Printer to a Virtual Machine
n
Using Smart Cards in Virtual Machines
Use a Removable Device in a Virtual Machine
You can connect and disconnect removable devices in a virtual machine. You can also change the
settings for a removable device by modifying virtual machine settings.
Prerequisites
n
Power on the virtual machine.
n
If you are connecting or disconnecting a USB device, familiarize yourself with the way
Workstation Player handles USB devices. See Connecting USB Devices to Virtual Machines.
Procedure
n
To connect a removable device, select the virtual machine, select Player > Removable Devices,
select the device, and select Connect.
If the device is connected to the host system through a USB hub, the virtual machine sees only the
USB device, not the hub.
A check mark appears next to the name of the device when the device is connected to the virtual
machine and a device icon appears on the virtual machine taskbar.
n
To change the settings for a removable device, select Player > Removable Devices, select the
device, and select Settings.
VMware, Inc.
60
Using VMware Workstation Player for Windows
n
To disconnect a removable device, select the virtual machine, select Player > Removable Devices,
select the device, and select Disconnect.
You can also disconnect the device by clicking or right-clicking the device icon on the virtual machine
taskbar. Using the taskbar icon is especially useful if you run the virtual machine in full screen mode.
Connecting USB Devices to Virtual Machines
When a virtual machine is running, its window is the active window. If you plug a USB device into the host
system, the device connects to the virtual machine instead of the host by default. If a USB device
connected to the host system does not connect to a virtual machine at power on, you must manually
connect the device to the virtual machine.
When you connect a USB device to a virtual machine, Workstation Player retains the connection to the
affected port on the host system. You can suspend or power off the virtual machine, or unplug the device.
When you plug in the device again or resume the virtual machine, Workstation Player reconnects the
device. Workstation Player retains the connection by writing an autoconnect entry to the virtual machine
configuration (.vmx) file.
If Workstation Player cannot reconnect to the device, for example, because you disconnected the device,
the device is removed and Workstation Player displays a message to indicate that it cannot connect to the
device. You can connect to the device manually if it is still available. To manually connect a USB device to
the virtual machine, select VM > Removable Devices > Device Name > Connect (Disconnect from
host).
Follow the device manufacturer's procedures for unplugging the device from the host computer when you
physically unplug the device, move the device from host system to a virtual machine, move the device
between virtual machines, or move the device from a virtual machine to the host computer. Following
these procedures is especially important for data storage devices, such as zip drives. If you move a data
storage device too soon after saving a file and the operating system did not actually write the data to the
disk, you can lose data.
Installing USB Drivers on Windows Hosts
When a particular USB device is connected to a virtual machine for the first time, the host detects it as a
new device named VMware USB Device and installs the appropriate VMware driver.
The Windows operating system prompts you to run the Microsoft Windows Found New Hardware wizard.
Select the default action to install the software automatically. After the software is installed, the guest
operating system detects the USB device and searches for a suitable driver.
Disable Automatic Connection of USB Devices
You can disable the autoconnect feature if you do not want USB devices to connect to a virtual machine
when you power it on.
Prerequisites
Power off the virtual machine.
VMware, Inc.
61
Using VMware Workstation Player for Windows
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select USB Controller.
3
Deselect Automatically connect new USB devices to disable automatic connection of USB
devices.
4
Click OK to save your changes.
Connect USB HIDs to a Virtual Machine
To connect USB human interface devices (HIDs) to a virtual machine, you must configure the virtual
machine to show all USB input devices in the Removable Devices menu.
By default, USB HIDs, such as USB 1.1 and 2.0 mouse and keyboard devices, do not appear in the
Removable Devices menu in a virtual machine, even though they are plugged in to USB ports on the
host system.
An HID that is connected to a virtual machine is not available to the host system.
Prerequisites
n
Power off the virtual machine.
n
If you are using a KVM switch for a mouse or keyboard, disable automatic connection of USB
devices. See Disable Automatic Connection of USB Devices.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select USB Controller.
3
Select Show all USB input devices.
This option allows users to use special USB HIDs inside the virtual machine.
4
Click OK to save your changes.
5
Power on the virtual machine.
HIDs appear in the Removable Devices menu.
Install a PDA Driver and Synchronize With a Virtual Machine
To install a PDA driver in a virtual machine, you must synchronize the PDA with the virtual machine.
Procedure
1
Connect the PDA to the host system and synchronize it with the host system.
The PDA driver should begin installing in the virtual machine.
2
Allow the virtual machine to install the PDA driver.
VMware, Inc.
62
Using VMware Workstation Player for Windows
3
If connection warning messages appear, dismiss them.
4
If the PDA disconnects from the host system before the virtual machine can synchronize with it,
synchronize the PDA with the host system again.
The total time required to load the VMware USB device driver in the host system and install the PDA
driver in the virtual machine might exceed the device connection timeout value. A second
synchronization attempt usually succeeds.
Troubleshooting USB Device Control Sharing
Only the host system or the virtual machine can have control of a particular USB device at any one time.
Device control operates differently, depending on whether the host system is a Linux or a Windows
computer.
When you connect a device to a virtual machine, it is disconnected from the host system or from the
virtual machine that previously had control of the device. When you disconnect a device from a virtual
machine, it is returned to the host system.
Under some circumstances, if a USB storage device is in use on the host system, for example, one or
more files stored on the device are open on the host, an error appears in the virtual machine when you try
to connect to the device. You must let the host system complete its operation or close any application
connected to the device on the host system and connect to the device in the virtual machine again.
Add a Host Printer to a Virtual Machine
You can print from a virtual machine to any printer available to the host computer without having to install
additional drivers in the virtual machine.
The Workstation Player printer feature uses ThinPrint technology to replicate the host system printer
mapping in the virtual machine. When you enable the virtual machine printer, Workstation Player
configures a virtual serial port to communicate with the host printers.
Prerequisites
n
Support for virtual printers is disabled by default. To enable virtual printer support, see Configuring
Virtual Printers on Windows Hosts.
n
The virtual machine must be powered on or off. You cannot add a printer to a virtual machine in
suspended state.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Add.
3
In the Add Hardware wizard, select Printer and Finish.
The default device setting is to connect the virtual machine printer when the virtual machine is
powered on.
VMware, Inc.
63
Using VMware Workstation Player for Windows
What to do next
In a Print window, when you attempt to select a printer in Windows 7 virtual machines, you might see only
the default printer, even though other printers are available. To see the other printers, right-click the
default printer and point to Printer properties.
Using Smart Cards in Virtual Machines
Virtual machines can connect to smart card readers that interface to serial ports, parallel ports, USB
ports, PCMCIA slots, and PCI slots. A virtual machine considers a smart card reader to be a type of USB
device.
A smart card is a plastic card that has an embedded computer chip. Many government agencies and
large enterprises use smart cards to send secure communication, digitally sign documents, and
authenticate users who access their computer networks. Users plug a smart card reader into their
computer and insert their smart card in the reader. They are then prompted for their PIN to log in.
You can select a smart card reader from the Removable Devices menu in a virtual machine. A smart
card can be shared between virtual machines, or between the host system and one or more virtual
machines. Sharing is enabled by default.
When you plug a smart card reader into the host system, the reader appears as two separate USB
devices in Workstation Player. This is because you can use smart cards in one of two mutually exclusive
modes.
Shared mode
(Recommended) The smart card reader device is available as Shared
smart_card_reader_model in the Removable Devices menu. In Windows
XP guest operating systems, the shared reader appears as USB Smart
Card Reader after it is connected to the virtual machine. In Windows Vista
and Windows 7 guest operating systems, the generic smart card reader
device name appears under the Windows Device Manager list. The smart
card reader can be shared among applications on the host system and
among applications in different guest operating systems.
USB passthrough mode
The smart card reader device is available as smart_card_reader_model in
the Removable Devices menu. In USB passthrough mode, a single virtual
machine directly controls the physical smart card reader. A USB
passthrough smart card reader cannot be used by applications on the host
system or by applications in other virtual machines. You should use USB
passthrough mode only if connection in shared mode does not work well for
your scenario. You might need to install the driver provided by the
manufacturer to use USB passthrough mode.
VMware, Inc.
64
Using VMware Workstation Player for Windows
You can use smart cards with Windows operating systems and most Linux distributions. VMware provides
full smart card support for Windows virtual machines running on Linux hosts. Using smart cards in Linux
typically requires third-party software to effectively authenticate to a domain or enable secure
communications.
Note Although smart cards should work with common Linux browsers, email applications, and directory
services, these products have not been tested or certified by VMware.
Use a Smart Card in a Virtual Machine
You can configure a virtual machine to use the smart card reader on the host system.
Prerequisites
n
On a Windows host, start the SCardSvr.exe service.
n
Verify that the virtual machine has a USB controller. A USB controller is required, regardless of
whether the smart card reader is a USB device. A USB controller is added by default when you create
a virtual machine.
n
Connect the smart card reader to the host system.
n
Start the virtual machine
Procedure
n
To connect the smart card reader to the virtual machine, select the virtual machine and select Player
> Removable Devices > Shared <smart_card_reader_model> > Connect.
If the smart card reader is a USB device, two items appear for it in the menu. Both items use the
model name of the reader, but one item name begins with Virtual.
n
To disconnect the smart card reader from the virtual machine, select Player > Removable Devices >
Shared <smart_card_reader_model> > Disconnect.
n
To remove the smart card from the virtual machine, select Player > Removable Devices > Shared
<smart_card_reader_model> > Remove Smart Card.
The smart card is removed from the virtual machine, but it remains connected on the host system. If
the smart card is physically removed from the smart card reader, this option is disabled.
n
To insert the smart card to the virtual machine, select Player > Removable Devices > Shared
<smart_card_reader_model> > Insert Smart Card.
If the smart card is physically inserted in the smart card reader, the smart card is also inserted in the
virtual machine.
VMware, Inc.
65
Using VMware Workstation Player for Windows
Disable Smart Card Sharing
By default, you can share a smart card between virtual machines or between the host system and one or
more virtual machines. You might want to disable smart card sharing if you are using a PCMCIA smart
card reader, deploying virtual machines for enterprise use and do not want to support drivers for various
smart card readers, or the host system has drivers but the virtual machines do not.
The setting that controls smart card sharing is located in the Workstation Player global configuration file.
Procedure
1
2
Find the global configuration file on the host system.
Operating System
Location
Windows Server 2008 R2, Windows
Server 2012 R2, Windows Server 2016,
Windows 7, Windows 8, Windows 10
hosts
Workstation 12.0:
%PROGRAMDATA%\VMware\VMware Player\config.ini
Workstation 12.1 and later:
%PROGRAMDATA%\VMware\VMware Workstation\config.ini
If the global configuration file does not yet exist on the host system, select Player > File >
Preferences and change at least one Workstation Player preference setting.
Workstation Player creates the global configuration file when you change Workstation Player
preference settings.
3
Open the global configuration file in a text editor and set the usb.ccid.useSharedMode property to
FALSE.
For example: usb.ccid.useSharedMode = "FALSE"
4
Save and close the global configuration file.
5
Set permissions on the global configuration file so that other users cannot change it.
VMware, Inc.
66
Setting Up Shared Folders for a
Virtual Machine
9
You can set up shared folders for a virtual machine. Shared folders provide an easy way to share files
among virtual machines and between virtual machines and the host system.
The directories that you add as shared folders can be located on the host system, or they can be located
on network directories that are accessible from the host system. Access to shared folders is governed by
permission settings on the host system. For example, if you are running Workstation Player as a user
named User, the virtual machine can read and write files in the shared folder only if User has permission
to read and write the files.
To use shared folders, the guest operating system must have the current version of VMware Tools and
must support shared folders.
Important Shared folders expose your files to programs in the virtual machine and might put your data
at risk. Only enable shared folders if you trust the virtual machine with your data.
This chapter includes the following topics:
n
Using Shared Folders
n
Enable a Shared Folder for a Virtual Machine
n
View Shared Folders in a Windows Guest
n
Mounting Shared Folders in a Linux Guest
n
Change Shared Folder Properties
n
Change the Folders That a Virtual Machine Can Share
n
Disable Folder Sharing for a Virtual Machine
n
Mapping a Virtual Disk to the Host System
VMware, Inc.
67
Using VMware Workstation Player for Windows
Using Shared Folders
You can use shared folders to share files among virtual machines and between virtual machines and the
host system. The directories that you add as shared folders can be on the host system, or they can be
network directories that are accessible from the host computer.
Important You cannot open a file in a shared folder from more than one application at a time. For
example, do not open the same file in an application on the host operating system and in another
application in the guest operating system. If one of the applications writes to the file, data might be
corrupted.
Guest Operating Systems That Support Shared Folders
To use shared folders, a virtual machine must have a supported guest operating system.
The following guest operating systems support shared folders.
n
Windows Server 2003 R2
n
Windows Server 2008 R2
n
Windows Server 2012 R2
n
Windows Server 2016
n
Windows Vista
n
Windows 7
n
Windows 8
n
Windows 10
n
Linux with a kernel version of 2.6 or later
n
Solaris x86 10
n
Solaris x86 10 Update 1 and later
Using Permissions to Restrict Access to Shared Files in a Linux
Guest
You can use permissions to restrict access to the files in a shared folder on a Linux guest operating
system.
On a Linux host, if you create files that you want to share with a Linux guest operating system, the file
permissions shown on the guest operating system are the same as the permissions on the host system.
You can use the fmask and dmask commands to mask permissions bits for files and directories.
If you create files on a Windows host system that you want to share with a Linux guest operating system,
read-only files are displayed as having read and execute permission for everyone and other files are
shown as fully writable by everyone.
VMware, Inc.
68
Using VMware Workstation Player for Windows
If you use a Linux guest operating system to create files for which you want to restrict permissions, use
the mount program with the following options in the guest operating system.
n
uid
n
gid
n
fmask
n
dmask
n
ro (read only)
n
rw (read-write)
rw is the default.
If you are using a virtual machine that was created with the Windows version of Workstation Player, or a
previous release of the Linux version of Workstation Player, you can change the owner permissions only.
Enable a Shared Folder for a Virtual Machine
You can enable folder sharing for a specific virtual machine. To set up a folder for sharing between virtual
machines, you must configure each virtual machine to use the same directory on the host system or
network share.
Prerequisites
n
Verify that the virtual machines use a guest operating system that supports shared folders. See Guest
Operating Systems That Support Shared Folders.
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that permission settings on the host system allow access to files in the shared folders. For
example, if you are running Workstation Player as a user named User, the virtual machine can read
and write files in the shared folder only if User has permission to read and write them.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select Shared Folders.
3
Select a folder sharing option.
Option
Description
Always enabled
Keep folder sharing enabled, even when the virtual machine is shut down,
suspended, or powered off.
Enabled until next power off or
suspend
Enable folder sharing temporarily, until you power off, suspend, or shut down the
virtual machine. If you restart the virtual machine, shared folders remain enabled.
This setting is available only when the virtual machine is powered on.
VMware, Inc.
69
Using VMware Workstation Player for Windows
4
(Optional) To map a drive to the Shared Folders directory, select Map as a network drive in
Windows guests.
This directory contains all of the shared folders that you enable. Workstation Player selects the drive
letter.
5
Click Add to add a shared folder.
On Windows hosts, the Add Shared Folder wizard starts.
6
Type the path on the host system to the directory to share.
If you specify a directory on a network share, such as D:\share, Workstation Player always attempts
to use that path. If the directory is later connected to the host on a different drive letter,
Workstation Player cannot locate the shared folder.
7
Specify the name of the shared folder as it should appear inside the virtual machine.
Characters that the guest operating system considers illegal in a share name appear differently when
viewed inside the guest. For example, if you use an asterisk in a share name, you see %002A instead
of * in the share name on the guest. Illegal characters are converted to their ASCII hexadecimal
value.
8
9
Select shared folder attributes.
Option
Description
Enable this share
Enable the shared folder. Deselect this option to disable a shared folder without
deleting it from the virtual machine configuration.
Read-only
Make the shared folder read-only. When this property is selected, the virtual
machine can view and copy files from the shared folder, but it cannot add,
change, or remove files. Access to files in the shared folder is also governed by
permission settings on the host computer.
Click Finish to add the shared folder.
The shared folder appears in the Folders list. The check box next to folder name indicates that the
folder is being shared. You can deselect this check box to disable sharing for the folder.
10 Click OK to save your changes.
What to do next
View the shared folder. On Linux guests, shared folders appear under /mnt/hgfs. On Solaris guests,
shared folders appear under /hgfs. To view shared folders on a Windows guest, see View Shared
Folders in a Windows Guest.
View Shared Folders in a Windows Guest
In a Windows guest operating system, you can view shared folders by using desktop icons.
Note If the guest operating system has VMware Tools from Workstation 4.0, shared folders appear as
folders on a designated drive letter.
VMware, Inc.
70
Using VMware Workstation Player for Windows
Procedure
n
Depending on the Windows operating system version, look for VMware Shared Folders in My
Network Places, Network Neighborhood, or Network.
n
If you mapped the shared folder as a network drive, open My Computer and look for Shared
Folders on 'vmware-host' under Network Drives.
n
To view a specific shared folder, go directly to the folder by using the UNC path \\vmwarehost\Shared Folders\shared_folder_name.
Mounting Shared Folders in a Linux Guest
After you enable a shared folder, you can mount one or more directories or subdirectories in the shared
folder to any location in the file system in addition to the default location of /mnt/hgfs.
Depending on the kernel version of the Linux guest operating system, VMware Tools uses different
components to provide shared-folder functionality. In Linux kernels prior to version 4.0, the VMware Tools
services script loads a driver that performs the mount. Linux kernels 4.0 and later use a FUSE file system
component.
You can use different mount commands to mount all shares, one share, or a subdirectory within a share
to any location in the file system. The commands also vary depending on the Linux-kernel version of the
guest.
Table 9‑1. Mount Command Syntax
Linux Kernel Prior to 4.0
Linux Kernel 4.0 and Later
Description
mount -t
vmhgfs .host:/ /home/user1/shares
/usr/bin/vmhgfsfuse .host:/ /home/user1/shares -o
subtype=vmhgfs-fuse,allow_other
Mounts all shares
to /home/user1/shares
mount -t vmhgfs .host:/foo /tmp/foo
/usr/bin/vmhgfsfuse .host:/foo /tmp/foo -o
subtype=vmhgfs-fuse,allow_other
Mounts the share named foo
/usr/bin/vmhgfsfuse .host:/foo/bar /var/lib/bar -o
subtype=vmhgfs-fuse,allow_other
Mounts the subdirectory bar within
mount -t
vmhgfs .host:/foo/bar /var/lib/bar
to /tmp/foo
the share foo to /var/lib/bar
For Linux kernel prior to version 4.0, you can use VMware-specific options in addition to the standard
mount syntax. Enter the command /sbin/mount.vmhgfs -h to list the options.
For Linux kernel version 4.0 or later, enter the command /usr/bin/vmhgfs-fuse -h to list the available
options.
Note The mount can fail if shared folders are disabled or if the share does not exist. You are not
prompted to run the VMware Tools vmware-config-tools.pl configuration program again.
Change Shared Folder Properties
After you create a shared folder, you can change the folder name, the host path, and other attributes.
VMware, Inc.
71
Using VMware Workstation Player for Windows
Prerequisites
Create a shared folder. See Enable a Shared Folder for a Virtual Machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select Shared Folders.
3
Select the shared folder in the folders list and click Properties.
4
To change the name of the shared folder as it appears inside the virtual machine, type the new name
in the Name text box.
Characters that the guest operating system considers illegal in a share name appear differently when
viewed inside the guest. For example, if you use an asterisk in a share name, you see %002A instead
of * in the share name on the guest. Illegal characters are converted to their ASCII hexadecimal
value.
5
To change the host path for the shared folder, browse to or type the new path in the Host path text
box.
If you specify a directory on a network share, such as D:\share, Workstation Player always attempts
to use that path. If the directory is later connected to the host on a different drive letter,
Workstation Player cannot locate the shared folder.
6
7
To change an attribute for the shared folder, select or deselect the attribute.
Option
Description
Enabled
Enable the shared folder. Deselect this option to disable a shared folder without
deleting it from the virtual machine configuration.
Read-only
Make the shared folder read-only. When this property is selected, the virtual
machine can view and copy files from the shared folder, but it cannot add,
change, or remove files. Access to files in the shared folder is also governed by
permission settings on the host computer.
Click OK to save your changes.
Change the Folders That a Virtual Machine Can Share
You can change the folders that a specific virtual machine is allowed to share.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select Shared Folders.
3
In the folders list, select the check boxes next to the folders to share and deselect the check boxes
next to the folders to disable.
4
Click OK to save your changes.
VMware, Inc.
72
Using VMware Workstation Player for Windows
Disable Folder Sharing for a Virtual Machine
You can disable folder sharing for a specific virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select Shared Folders.
3
Select Disabled to disable folder sharing.
4
Click OK to save your changes.
Mapping a Virtual Disk to the Host System
Instead of using shared folders or copying data between a virtual machine and the host system, you can
map a virtual disk to the host system. In this case, you map a virtual disk in the host file system as a
separate mapped drive. Using a mapped drive lets you connect to the virtual disk without going into a
virtual machine.
Map or Mount a Virtual Disk to a Drive on the Host System
When you map a virtual disk and its associated volume to a drive on the host system, you can connect to
the virtual disk without opening a virtual machine.
After you map the virtual disk to a drive on the host system, you cannot power on any virtual machine that
uses the disk until you disconnect the disk from the host system.
Important If you mount a virtual disk that has a snapshot and then write to the disk, you can irreparably
damage a snapshot or linked clone created from the virtual machine. Note that Workstation Player does
not support taking snapshots or deleting them.
Mapping a virtual disk to a host system is not supported in the standalone version of Workstation Player.
Virtual disk mapping is supported in the Workstation Player version included with Workstation Pro.
Prerequisites
n
Power off all virtual machines that use the virtual disk.
n
Verify that the virtual disk (.vmdk) files on the virtual disk are not compressed and do not have readonly permissions.
n
On a Windows host, verify that the volume is formatted with FAT (12/16/32) or NTFS. Only FAT
(12/16/32) and NTFS formatting is supported. If the virtual disk has mixed partitions, for example, one
partition is formatted with a Linux operating system and another partition is formatted with a Windows
operating system, you can map the Windows partition only.
n
Verify that the virtual disk is unencrypted. You cannot map or mount encrypted disks.
VMware, Inc.
73
Using VMware Workstation Player for Windows
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Hard Disk, click Utilities, and select Map.
3
On a Windows host, leave the check box Open file in read-only mode selected in the Map Virtual
Disk dialog box.
This setting prevents you from accidentally writing data to a virtual disk that might be the parent of a
snapshot or linked clone. Writing to such a disk might make the snapshot or linked clone unusable.
4
Browse to a virtual disk (.vmdk) file, select it, and click Open.
5
Select the volume to map or mount and select an unused drive letter on the host system.
6
(Optional) On a Windows host, if you do not want the drive to open in Windows Explorer after it is
mapped, deselect the Open drive in Windows Explorer after mapping check box.
7
Click OK or Mount.
The drive appears on the host system. You can read from or write to files on the mapped virtual disk
on the host system.
Disconnect a Virtual Disk from the Host System
To use a virtual disk from a virtual machine after it has been mapped or mounted on the host system, you
must disconnect it from the host system.
On Windows hosts, you must use Workstation Player to disconnect the drive from the host system. The
mapped drive letter does not appear in the list of network drives when you use the Windows Disconnect
Network Drive command.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Hard Disk, click Utilities, and select Disconnect.
You can now power on any virtual machine that uses this disk.
VMware, Inc.
74
Configuring and Managing
Virtual Machines
10
You can change virtual machine options, configure video and sound card settings, and move virtual
machines to another host system or to a different location on the same host system.
This chapter includes the following topics:
n
Change the Name of a Virtual Machine
n
Change the Guest Operating System for a Virtual Machine
n
Change the Working Directory for a Virtual Machine
n
Change the Virtual Machine Directory for a Virtual Machine
n
Change the Memory Allocation for a Virtual Machine
n
Configuring Video and Sound
n
Moving Virtual Machines
n
Delete a Virtual Machine
n
View the Message Log for a Virtual Machine
n
Using the VIX API
n
Install New Software in a Virtual Machine
Change the Name of a Virtual Machine
When you run a virtual machine, its name appears in the title bar. Workstation Player uses the original
name of the virtual machine to name the directory where the virtual machine files are stored.
Changing the name of a virtual machine does not change the name of the virtual machine directory or
rename the virtual machine files on the host system.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select General.
3
Type the new name.
4
Click OK to save your changes.
VMware, Inc.
75
Using VMware Workstation Player for Windows
What to do next
When you restart the virtual machine the new name appears in the library.
Change the Guest Operating System for a Virtual Machine
If you upgrade the guest operating system that is installed in a virtual machine, or if you specify the wrong
operating system version when you create the virtual machine, you must change the guest operating
system type that is configured for the virtual machine.
When you change the operating system type, the virtual machine configuration (.vmx) file changes. The
guest operating system itself does not change. To upgrade the guest operating system, obtain the
appropriate software from the operating system vendor.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select General.
3
Select the new operating system and version.
4
Click OK to save your changes.
Change the Working Directory for a Virtual Machine
By default, the working directory and the virtual machine directory are the same. You might want to
change the working directory to improve performance. For example, to create a paging file on a fast disk
that has a lot of disk space but leave the virtual disk and configuration file on a different disk, you can
change the working directory so that it is located on the fast disk.
The working directory is where Workstation Player stores suspended state (.vmss), snapshot (.vmsn),
virtual machine paging (.vmem), and redo log files for a virtual machine.
Changing the working directory does not change the directory where the virtual machine configuration
(.vmx) file or the log files are stored.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select General.
3
Type or browse to the location of the new working directory.
4
Click OK to save your changes.
VMware, Inc.
76
Using VMware Workstation Player for Windows
Change the Virtual Machine Directory for a Virtual
Machine
The virtual machine directory is where Workstation Player stores virtual machine files, including the virtual
machine configuration (.vmx) file. By default, the virtual machine directory and the working directory are
the same.
Prerequisites
Power off the virtual machine.
Procedure
1
In the host file system, rename the directory where the .vmx file is stored.
2
Select File > Open a Virtual Machine.
3
Browse to the new location of the .vmx file and click Open.
Change the Memory Allocation for a Virtual Machine
You can adjust the amount of memory that is allocated to a virtual machine.
On 64-bit hosts, the maximum amount of memory for each virtual machine is 32GB. On 32-bit hosts, the
maximum amount of memory for each virtual machine is 8GB. The total amount of memory that you can
assign to all virtual machines running on a single host system is limited only by the amount of RAM on the
host system.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Memory.
The Memory panel includes information to help you select the appropriate amount of memory for the
virtual machine. The high end of the range is determined by the amount of memory that is allocated to
all running virtual machines.
3
Align the slider with the corresponding icon to change the amount of memory.
The color-coded icons indicate the maximum recommended memory, the recommended memory, and
the guest operating system minimum memory amounts.
4
Click OK to save your changes.
5
Power on the virtual machine to implement the changes.
VMware, Inc.
77
Using VMware Workstation Player for Windows
Configuring Video and Sound
For best color and graphics display, coordinate host and guest operating system color settings.
Workstation Player supports games and applications that use DirectX 9 and DirectX 10 accelerated
graphics, but you must perform some 3D preparation tasks on the host and guest operating systems.
Workstation Player usually installs the necessary drivers for sound support, but you must manually install
a driver on some of the oldest and newest guest operating systems.
n
Setting Screen Color Depth
The number of screen colors available in the guest operating system depends on the screen color
setting of the host operating system.
n
Using Accelerated 3D Graphics
You must perform certain preparation tasks on the host system and on virtual machines to use
accelerated 3D graphics.
n
Configuring Sound
Workstation Player provides a sound device compatible with the Sound Blaster AudioPCI and
supports sound in Windows and Linux guest operating systems. The Workstation Player sound
device is enabled by default.
Setting Screen Color Depth
The number of screen colors available in the guest operating system depends on the screen color setting
of the host operating system.
Virtual machines support the following screen colors.
n
16-color (VGA) mode
n
8-bit pseudocolor
n
16 bits per pixel (16 significant bits per pixel)
n
32 bits per pixel (24 significant bits per pixel)
If the host operating system is in 15-bit color mode, the guest operating system color setting controls offer
15-bit mode in place of 16-bit mode. If the host operating system is in 24-bit color mode, the guest
operating system color setting controls offer 24-bit mode in place of 32-bit mode.
If you run a guest operating system set for a greater number of colors than the host operating system, the
colors in the guest operating system might not be correct or the guest operating system might not be able
to use a graphical interface. If these problems occur, you can either increase the number of colors in the
host operating system or decrease the number of colors in the guest operating system.
To change color settings on the host operating system, power off all virtual machines and close
Workstation Player and then follow standard procedures for changing color settings.
VMware, Inc.
78
Using VMware Workstation Player for Windows
How you change color settings in a guest operating system depends on the type of guest operating
system. In a Windows guest, the Display Properties control panel offers only those settings that are
supported. In a Linux or FreeBSD guest, you must change the color depth before you start the X server,
or you must restart the X server after making the changes.
For best performance, use the same number of colors in the host and guest operating systems.
Using Accelerated 3D Graphics
You must perform certain preparation tasks on the host system and on virtual machines to use
accelerated 3D graphics.
Support for applications that use DirectX 9 accelerated graphics applies only to Windows XP, Windows
Vista, and Windows 7 guests on hosts running Windows 7 or later, or Linux. OpenGL applications run in
software emulation mode.
Support for applications that use DirectX 10 accelerated graphics applies only to Windows 10.
Prepare the Host System to Use 3D Accelerated Graphics
You must perform certain preparation tasks on the Windows or Linux host system to use 3D accelerated
graphics in a virtual machine.
Prerequisites
n
Verify that the host has a video card that supports DirectX 9 or DirectX 10 and the latest DirectX
Runtime required for the DirectX version being used.
The VMware guest operating system OpenGL driver for Windows and Linux supports the OpenGL
3.3 core profile only. The OpenGL3.3 compatibility profile is not supported.
Procedure
1
Upgrade the video drivers on the host system to the latest versions.
ATI Graphics drivers are available from the AMD Web site. NVIDIA drivers are available from the
NVIDIA Web site.
2
Move the Hardware Acceleration slider to the Full position.
Option
Description
Windows 7, Windows 8, and Windows
10
Right-click the desktop and select Personalize > Screen resolution > Advanced
Settings > Troubleshoot > Change settings.
Prepare a Virtual Machine to Use Accelerated 3D Graphics
You must perform certain preliminary tasks to use accelerated 3D graphics on a virtual machine.
The accelerated 3D graphics feature is enabled by default on Player 3.x and later virtual machines.
VMware, Inc.
79
Using VMware Workstation Player for Windows
Prerequisites
n
Prepare the host system to use accelerated 3D graphics. See Prepare the Host System to Use 3D
Accelerated Graphics.
n
If using DirectX 9, verify that the guest operating system is Windows XP or later. DirectX 9 is
supported on virtual machines running hardware version 11 or earlier.
n
If using DirectX 10, verify that the guest operating system is Windows 7 or later. DirectX 10 is
supported on virtual machines running hardware version 12 or later.
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Power off the virtual machine. The virtual machine must not be suspended.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Display.
3
Select Accelerate 3D graphics.
4
Configure the virtual machine to use only one monitor.
5
Click OK to save your changes.
6
Power on the virtual machine and install the required DirectX EndRuntime version.
This download is available from the Microsoft Download Center.
7
Install and run your 3D applications.
Configuring Sound
Workstation Player provides a sound device compatible with the Sound Blaster AudioPCI and supports
sound in Windows and Linux guest operating systems. The Workstation Player sound device is enabled
by default.
Sound support includes pulse code modulation (PCM) output and input. For example, you can play .wav
files, MP3 audio, and Real Media audio. MIDI output from Windows guests is supported through the
Windows software synthesizer. MIDI input is not supported, and no MIDI support is available for Linux
guests.
Windows and most recent Linux distributions detect the sound device and install appropriate drivers for it.
A sound driver is installed when you install VMware Tools in a 64-bit Windows Vista or Windows 7 guest
operating system. For 32-bit Windows Vista, Windows 7, Windows 2003 Server, and Windows Server
2008 guests, you must use Windows Update to install a 32-bit driver.
Configure Sound Card Settings
The VMware virtual sound device is compatible with a Creative Technology Sound Blaster Audio API. The
sound device supports sound in Windows and Linux guest operating systems.
VMware, Inc.
80
Using VMware Workstation Player for Windows
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Sound Card.
3
Configure one or more sound card settings.
4
Option
Description
Connected
Connects or disconnects the sound device while the virtual machine is running.
You can also use the Devices menu and select the drive to connect or
disconnect.
Connect at power on
Automatically connects the sound device to the virtual machine when you power
on the virtual machine.
Use default host sound card
The virtual machine uses the default sound card in the host system.
Specify host sound card
Selects which sound card to use if you have more than one physical sound card
on the host system.
Enable echo cancellation
Enables echo cancellation for the sound card.
Click OK to save your changes.
Moving Virtual Machines
You can move a virtual machine that was created in Workstation Player to a different host system or to a
different location on the same host system and connect to a virtual machine by using a VNC client.
n
Move a Virtual Machine to a New Location or New Host
You can move a virtual machine that is created in Workstation Player to a different host system or to
a different location on the same host system. You can move a virtual machine to a host system that
has a different operating system.
n
Configure a Virtual Machine for Compatibility
When you create a virtual machine that you intend to distribute to other users, you should configure
the virtual machine for maximum compatibility with all expected host systems. Users might be limited
in their ability to make changes in a virtual machine so that it is compatible with their host systems.
n
Using the Virtual Machine UUID
Each virtual machine has a universal unique identifier (UUID). The UUID is generated when you
initially power on the virtual machine.
Move a Virtual Machine to a New Location or New Host
You can move a virtual machine that is created in Workstation Player to a different host system or to a
different location on the same host system. You can move a virtual machine to a host system that has a
different operating system.
Moving a virtual machine typically involves moving the files that make up the virtual machine. The
pathnames for all files associated with a Workstation Player virtual machine are relative to the virtual
machine directory.
VMware, Inc.
81
Using VMware Workstation Player for Windows
When you move a virtual machine, Workstation Player generates a new MAC address for the virtual
network adapter. Workstation Player also generates a new MAC address when you rename a directory in
the path to the virtual machine configuration (.vmx) file.
Prerequisites
n
Familiarize yourself with how Workstation Player generates UUIDs for moved virtual machines. See
Using the Virtual Machine UUID.
n
If you are moving the virtual machine to a different host system, familiarize yourself with the
limitations of moving a virtual machine to a new host. See Limitations of Moving a Virtual Machine to
a Different Host.
n
If you configured the working directory to reside in a different location on the host system, move files
from the working directory into the virtual machine directory and change the working directory to this
location.
n
Verify that virtual machine devices and any associated files point to locations that you can access
from the new location.
n
Verify that all virtual machine files are stored in the virtual machine directory. Some files might reside
outside of the virtual machine directory.
Procedure
1
Shut down the guest operating system and power off the virtual machine.
2
Copy the virtual machine files to the new location.
3
Verify that you copied all of the virtual machine files to the new location.
4
Open the virtual machine in Workstation Player
5
Option
Description
If you moved the virtual machine to a
different location on the same host
system
Remove the virtual machine from the library, select File > Open a Virtual
Machine, and browse to the .vmx file in its new location.
If you moved the virtual machine to a
different host system
Start Workstation Player on the new host system, select File > Open a Virtual
Machine, and browse to the .vmx file.
When you are certain that the virtual machine in the new location works correctly, delete the virtual
machine files from the original location.
Limitations of Moving a Virtual Machine to a Different Host
You should be aware of certain limitations before you move a virtual machine to a different host system.
n
The guest operating system might not work correctly if you move a virtual machine to a host system
that has significantly different hardware, for example, if you move a virtual machine from a
multiprocessor host to a uniprocessor host.
VMware, Inc.
82
Using VMware Workstation Player for Windows
n
Player 3.x and later virtual machines support up to eight-way virtual symmetric multiprocessing (SMP)
on multiprocessor host systems. Player 6.x and later virtual machines support up to sixteen-way
multiprocessing on multiprocessor host systems. You can assign up to 8 or 16 virtual processors to
virtual machines running on host systems that have at least two logical processors. If you attempt to
assign two processors to a virtual machine that is running on a uniprocessor host system, a warning
message appears. You can disregard this message and assign two processors to the virtual machine,
but you must move it to a host that has at least two logical processors before you can power it on.
Configure a Virtual Machine for Compatibility
When you create a virtual machine that you intend to distribute to other users, you should configure the
virtual machine for maximum compatibility with all expected host systems. Users might be limited in their
ability to make changes in a virtual machine so that it is compatible with their host systems.
Procedure
n
Install VMware Tools in the virtual machine.
VMware Tools significantly improves the user’s experience working with the virtual machine.
n
Determine which virtual devices are actually required, and do not include any that are not needed or
useful for the software you are distributing with the virtual machine.
Generic SCSI devices are typically not appropriate.
n
To connect a physical device to a virtual device, use the Auto detect options when you configure the
virtual machine.
The Auto detect options allow the virtual machine to adapt to the user’s system, and they work
whether the host operating system is Windows or Linux. Users who have no physical device receive a
warning message.
n
To connect a CD-ROM or floppy to an image file that you ship with the virtual machine, make sure the
image file is in the same directory as the virtual machine.
A relative path, rather than an absolute path, is used.
n
For both a physical CD-ROM and an image, provide two virtual CD-ROM devices in the virtual
machine.
n
Choose a reasonable amount of memory to allocate to the virtual machine.
For example, if the host system does not have enough physical memory to support the memory
allocation, the user cannot power on the virtual machine.
n
Choose a reasonable screen resolution for the guest.
A user is likely to find it easier to increase the resolution manually than to deal with a display that
exceeds the user’s physical screen size.
VMware, Inc.
83
Using VMware Workstation Player for Windows
Using the Virtual Machine UUID
Each virtual machine has a universal unique identifier (UUID). The UUID is generated when you initially
power on the virtual machine.
You can use the UUID of a virtual machine for system management in the same way that you use the
UUID of a physical computer. The UUID is stored in the SMBIOS system information descriptor, and you
can access it by using standard SMBIOS scanning software, including SiSoftware Sandra or IBM
smbios2.
If you do not move or copy the virtual machine to another location, the UUID remains constant. When you
power on a virtual machine that was moved or copied to a new location, you are prompted to specify
whether you moved or copied the virtual machine. If you indicate that you copied the virtual machine, the
virtual machine receives a new UUID.
Suspending and resuming a virtual machine does not trigger the process that generates a UUID. The
UUID in use at the time the virtual machine was suspended remains in use when the virtual machine is
resumed, even if it was copied or moved. You are not prompted to specify whether you moved or copied
the virtual machine until the next time you reboot the virtual machine.
Configure a Virtual Machine to Keep the Same UUID
You can configure a virtual machine to always keep the same UUID, even when it is moved or copied.
When a virtual machine is set to always keep the same UUID, you are not prompted when a virtual
machine is moved or copied.
Prerequisites
Power off the virtual machine.
Procedure
1
Open the virtual machine configuration (.vmx) file in a text editor.
2
Add the uuid.action property and set it to keep.
For example: uuid.action = "keep"
Delete a Virtual Machine
You can delete a virtual machine and all of its files from the host file system.
Important Deleting a virtual machine is irreversible.
Prerequisites
Power off the virtual machine.
Procedure
1
Right-click the virtual machine in the library and select Delete VM from Disk.
VMware, Inc.
84
Using VMware Workstation Player for Windows
2
Click Yes to delete the virtual machine.
The virtual machine and all of its files are removed from the host file system.
View the Message Log for a Virtual Machine
You can view the message log to review information about a particular virtual machine. Messages include
warning information about the virtual machine.
Procedure
1
Power on the virtual machine.
2
Select Player > Manage > Message Log.
3
Select a message in the message log to a see a detailed description of the message.
Using the VIX API
Application developers can use the VMware VIX API to write programs to automate virtual machine
operations.
The API is high level, easy to use, and practical for script writers and application programmers. With API
functions, you can register, power virtual machines on and off, and run programs in guest operating
systems. Additional language bindings are available for Perl, COM, and shell scripts such as vmrun.
See the VMware VIX API Release Notes.
Install New Software in a Virtual Machine
Installing new software in a virtual machine is similar to installing new software on a physical computer.
Only a few additional steps are required.
Prerequisites
n
Verify that VMware Tools is installed in the guest operating system. Installing VMware Tools before
installing the software minimizes the likelihood that you will have to reactivate the software if the
virtual machine configuration changes.
n
Verify that the virtual machine has access to the CD-ROM drive, ISO image file, or floppy drive where
the installation software is located.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Memory, set the final memory size for the virtual machine, and click
OK.
Some applications use a product activation feature that creates a key based on the virtual hardware
in the virtual machine where it is installed. Changes in the configuration of the virtual machine might
require you to reactivate the software. Setting the memory size minimizes the number of significant
changes.
VMware, Inc.
85
Using VMware Workstation Player for Windows
3
Install the new software according to the manufacturer’s instructions.
Disable Acceleration if a Program Does Not Run
When you install or run software inside a virtual machine, Workstation Player might appear to stop
responding. This problem typically occurs early in the program's execution. In many cases, you can get
past the problem by temporarily disabling acceleration in the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Processors.
3
Select Disable acceleration for binary translation to disable acceleration.
4
Click OK to save your changes.
What to do next
After you pass the point where the program encountered problems, re-enable acceleration. Because
disabling acceleration slows down virtual machine performance, you should use it only for getting past the
problem with running the program
VMware, Inc.
86
Configuring and Managing
Devices
11
You can use Workstation Player to add devices to virtual machines, including DVD and CD-ROM drives,
floppy drives, USB controllers, virtual and physical hard disks, parallel and serial ports, generic SCSI
devices, and processors. You can also modify settings for existing devices.
This chapter includes the following topics:
n
Configuring DVD, CD-ROM, and Floppy Drives
n
Configuring a USB Controller
n
Configuring and Maintaining Virtual Hard Disks
n
Configuring Virtual Ports
n
Configuring Generic SCSI Devices
n
Configuring Sixteen-Way Virtual Symmetric Multiprocessing
n
Configuring Keyboard Features
n
Modify Hardware Settings for a Virtual Machine
Configuring DVD, CD-ROM, and Floppy Drives
You can add up to four IDE devices, up to 60 SCSI devices, and up to 120 SATA devices (four controllers
with 30 devices per controller) to a virtual machine. Any of these devices can be connected to a physical
or virtual CD-ROM or DVD device. CD-ROM and DVD devices cannot be connected to an NVMe
controller.
A virtual machine can read data from a DVD disc. Workstation Player does not support playing DVD
movies in a virtual machine. If you use a DVD player application that does not require video overlay
support in the video card, you might be able to play a movie.
Add a DVD or CD-ROM Drive to a Virtual Machine
You can add one or more DVD or CD-ROM drives to a virtual machine. You can connect the virtual DVD
or CD-ROM drive to a physical drive or an ISO image file.
You can configure the virtual DVD or CD-ROM drive as an IDE, SCSI, or SATA device, regardless of the
type of physical drive that you connect it to. For example, if the host has an IDE CD-ROM drive, you can
set up the virtual machine drive as either SCSI or IDE and connect it to the host drive.
VMware, Inc.
87
Using VMware Workstation Player for Windows
Do not configure legacy emulation mode unless you experience problems with normal mode. See
Configure Legacy Emulation Mode for a DVD or CD-ROM Drive for more information.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select DVD/CD Drive.
4
Click Finish to add the drive to the virtual machine.
5
(Optional) To change which SCSI, IDE, or SATA device identifier to use for the drive, select the drive
and click Advanced.
6
Click OK to save your changes.
Add a Floppy Drive to a Virtual Machine
You can configure a virtual floppy drive to connect to a physical floppy drive or an existing or blank floppy
image file. You can add up to two floppy drives to a virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select Floppy Drive.
4
Click Finish to add the drive to the virtual machine.
5
Select the floppy media type.
Option
Description
Use a physical floppy drive
The virtual machine uses a physical floppy drive.
Use a floppy image
The drive connects to an floppy image (.flp) file.
Create a blank floppy image
The drive connects to a blank floppy image (.flp) file that you create.
6
If you selected the physical floppy drive media type, select a specific floppy drive or select Auto
detect to allow Workstation Player to auto-detect the drive to use.
7
If you selected the floppy image or blank floppy image media type, type the name or browse to the
location of a floppy image (.flp) file.
8
To connect the drive or floppy image file to the virtual machine when the virtual machine powers on,
select Connect at power on.
9
Click OK to save your changes.
VMware, Inc.
88
Using VMware Workstation Player for Windows
Configure Legacy Emulation Mode for a DVD or CD-ROM Drive
Use legacy emulation mode to work around direct communication problems between a guest operating
system and a DVD or CD-ROM drive.
In legacy emulation mode, you can read only from data discs in the DVD or CD-ROM drive. Legacy
emulation mode does not provide the other capabilities of normal mode. In normal mode, the guest
operating system communicates directly with the CD-ROM or DVD drive. This direct communication
enables you to read multisession CDs, perform digital audio extraction, view videos, and use CD and
DVD writers to burn discs.
If you run more than one virtual machine at a time, and if their CD-ROM drives are in legacy emulation
mode, you must start the virtual machines with their CD-ROM drives disconnected. By disconnecting the
CD-ROM drives in the virtual machines, you prevent multiple virtual machines from being connected to
the CD-ROM drive at the same time.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select the drive and click Advanced.
3
Select Legacy emulation and click OK.
On Windows hosts, this option is deselected by default.
4
Click OK to save your changes.
Configuring a USB Controller
A virtual machine must have a USB controller to use USB devices and smart card readers. To use a
smart card reader, a virtual machine must have a USB controller regardless of whether the smart card
reader is actually a USB device.
Workstation Player provides a USB controller to support the following types of USB devices.
n
USB 1.1 UHCI (Universal Host Controller Interface) is supported for all virtual machine hardware
versions.
n
USB 2.0 EHCI (Enhanced Host Controller Interface) controllers are supported if the virtual machine
hardware is compatible with Workstation 6 and later virtual machines.
n
USB 3.0 xHCI (Extensible Host Controller Interface) support is available for Linux guests running
kernel version 2.6.35 or later and for Windows 8 guests. The virtual machine hardware must be
compatible with Workstation 8 or later virtual machines.
For USB 2.0 or 3.0 support, you must select USB 2.0 or 3.0 compatibility by configuring virtual machine
settings for the USB controller. USB 2.0 and 3.0 devices are high-speed devices that include the latest
models of USB flash drives, USB hard drives, iPods, and iPhone.
VMware, Inc.
89
Using VMware Workstation Player for Windows
If you select USB 2.0 compatibility, when a USB 2.0 device connects to a USB port on the host system,
the device connects to the EHCI controller and operates in USB 2.0 mode. A USB 1.1 device connects to
the UHCI controller and operates in USB 1.1 mode. If you enable USB 3.0, the xHCI controller can
support all USB devices, including USB 1.1, 2.0, and 3.0 devices.
Although the host operating system must support USB, you do not need to install device-specific drivers
for USB devices in the host operating system to use those devices only in the virtual machine. Linux
kernels earlier than 2.2.17 do not support USB.
VMware has tested a variety of USB devices. If the guest operating system has the appropriate drivers,
you can use many different USB devices, including PDAs, Smart phones, printers, storage devices,
scanners, MP3 players, digital cameras, memory card readers, and isochronous transfer devices, such as
webcams, speakers, and microphones.
You can connect USB human interface devices (HIDs), such as the keyboard and mouse, to a virtual
machine by enabling the Show all USB input devices option. If you do not select this option, these
devices do not appear in the Removable Devices menu and are not available to connect to the virtual
machine, even though they are plugged in to USB ports on the host system.
See Connect USB HIDs to a Virtual Machine for information on connecting HIDs.
Add a USB Controller to a Virtual Machine
A USB controller is required to use a smart card in a virtual machine, regardless of whether the smart
card reader is a USB device. You can add one USB controller to a virtual machine.
When you create a virtual machine in Workstation Player, a USB controller is added by default. If you
remove the USB controller, you can add it back.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, click Add.
3
In the New Hardware wizard, select USB Controller.
4
Click Finish to add the USB controller.
5
Configure the USB connection settings.
You can select multiple settings.
Option
Description
USB Compatibility
Selecting USB 2.0 or 3.0 enables support for isochronous USB devices, including
Web cams, speakers, and microphones.
Automatically connect new USB
devices
Connect new USB devices to the virtual machine. If this setting is not selected,
new USB devices are connected only to the host system.
VMware, Inc.
90
Using VMware Workstation Player for Windows
Option
Description
Show all USB input devices
Human interface devices (HIDs), such as USB 1.1 and 2.0 mouse and keyboard
devices, appear in the Removable Devices menu. Icons for HIDs appear in the
status bar. An HID that is connected to the guest operating system is not available
to the host system. The virtual machine must be powered off when you change
this setting.
Share Bluetooth devices with the
virtual machine
Enable support for Bluetooth devices.
Enable Support for Isochronous USB Devices
Modems and certain streaming data devices, such as speakers and webcams, do not work properly in a
virtual machine unless you enable support for isochronous USB devices.
Prerequisites
n
Verify that the guest operating system supports USB 2.0 devices or 3.0 devices.
n
On a Windows XP guest operating system, verify that the latest service pack is installed. If you use
Windows XP with no service packs, the driver for the EHCI controller cannot be loaded.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select USB Controller.
3
From the USB Compatibility list, select USB 2.0 or USB 3.0.
4
Option
Description
USB 2.0
Available if the virtual machine hardware is compatible with Workstation 6 and
later virtual machines.
USB 3.0
Available for Linux guests running kernel version 2.6.35 or later and for Windows
8 guests. The virtual machine hardware must be compatible with Workstation 8
and later virtual machines.
Click OK to save your changes.
Configuring and Maintaining Virtual Hard Disks
You can use Workstation Player to configure virtual hard disk storage for virtual machines.
A virtual disk is a file or set of files that appears as a physical disk drive to a guest operating system. The
files can be on the host system or on a remote computer. When you configure a virtual machine to use a
virtual disk, you can install a new operating system onto the virtual disk without repartitioning a physical
disk or rebooting the host.
The New Virtual Machine wizard creates a virtual machine that has one disk drive. You can modify
virtual machine settings to add more disk drives to a virtual machine, remove disk drives from a virtual
machine, and change certain settings for the existing disk drives.
VMware, Inc.
91
Using VMware Workstation Player for Windows
n
Configuring a Virtual Hard Disk
You can configure virtual hard disks as IDE or SATA disks for any guest operating system. You can
set up a virtual hard disk as a SCSI disk for any guest operating system that has a driver for the LSI
Logic or BusLogic SCSI adapter. You can also set up a virtual hard disk as an NVMe disk for any
guest system that includes NVMe drivers. You determine which SCSI adapter to use when you
create a virtual machine.
n
Compact a Virtual Hard Disk
Compacting a virtual hard disk can reclaim unused space in the virtual disk. Modern disks and
operating systems are much more efficient at managing disk space than in the recent past.
Therefore, do not expect the compacting procedure to return large amounts of disk space to the host
drive.
n
Expand a Virtual Hard Disk
You can add storage space to a virtual machine by expanding its virtual hard disk.
n
Defragment a Virtual Hard Disk
Like physical disk drives, virtual hard disks can become fragmented. Defragmenting disks
rearranges files, programs, and unused space on the virtual hard disk so that programs run faster
and files open more quickly. Defragmenting does not reclaim unused space on a virtual hard disk.
n
Remove a Virtual Hard Disk from a Virtual Machine
Removing a virtual hard disk disconnects it from a virtual machine. It does not delete files from the
host file system.
n
Using Lock Files to Prevent Consistency Problems on Virtual Hard Disks
A running virtual machine creates lock files to prevent consistency problems on virtual hard disks.
Without locks, multiple virtual machines might read and write to the disk, causing data corruption.
n
Moving a Virtual Hard Disk to a New Location
A key advantage of virtual hard disks is their portability. Because the virtual hard disks are stored as
files on the host system or a remote computer, you can move them easily to a new location on the
same computer or to a different computer.
Configuring a Virtual Hard Disk
You can configure virtual hard disks as IDE or SATA disks for any guest operating system. You can set up
a virtual hard disk as a SCSI disk for any guest operating system that has a driver for the LSI Logic or
BusLogic SCSI adapter. You can also set up a virtual hard disk as an NVMe disk for any guest system
that includes NVMe drivers. You determine which SCSI adapter to use when you create a virtual machine.
The files that make up an IDE, SATA, SCSI, or NVMe virtual hard disk can be stored on a hard disk of any
type. They can also be stored on other types of fast-access storage media.
To use SCSI hard disks in a 32-bit Windows XP virtual machine, you must download a special SCSI driver
from the VMware Web site. Follow the instructions on the Web site to use the driver with a fresh
installation of Windows XP.
VMware, Inc.
92
Using VMware Workstation Player for Windows
Growing and Allocating Virtual Disk Storage Space
Most virtual hard disks can be up to 8TB. SCSI disks on the BusLogic controller are limited to 2TB.
Depending on the size of the virtual hard disk and the host operating system, Workstation Player creates
one or more files to hold each virtual disk.
Virtual hard disk files include information such as the operating system, program files, and data files.
Virtual disk files have a .vmdk extension.
By default, the actual files that the virtual hard disk uses start small and grow to their maximum size as
needed. The main advantage of this approach is the smaller file size. Smaller files require less storage
space and are easier to move to a new location, but it takes slightly longer to write data to a disk
configured in this way.
You can also configure virtual hard disks so that all of the disk space is allocated when the virtual disk is
created. This approach provides enhanced performance and is useful if you are running performancesensitive applications in the virtual machine.
Regardless of whether you allocate all disk space in advance, you can configure the virtual hard disk to
split into multiple files on the host disk. The split is not visible to the virtual machine, but is necessary if
you move the virtual machine or its disks to a file system that does not support files larger than 4GB, such
as a USB thumb drive formatted with the FAT32 file system.
Add a New Virtual Hard Disk to a Virtual Machine
To increase storage space, you can add a new virtual hard disk to a virtual machine. Workstation Player
supports up to four IDE devices, 60 SCSI devices, 120 SATA devices, and 60 NVMe virtual disks.
Virtual hard disks are stored as files on the host computer or on a network file server. A virtual IDE drive
or SCSI drive can be stored on a physical IDE drive or on a physical SCSI drive.
As an alternative to adding a new virtual hard disk, you can expand the existing virtual hard disk. See
Expand a Virtual Hard Disk.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, click Add.
3
In the New Hardware wizard, select Hard Disk.
4
Select Create a new virtual disk.
5
Select the disk type.
Option
Description
IDE
Create an IDE device. You can add up to four IDE devices to a virtual machine.
SCSI
Create a SCSI device. You can add up to 60 SCSI devices to a virtual machine.
VMware, Inc.
93
Using VMware Workstation Player for Windows
6
Option
Description
SATA
Create a SATA device. You can add up to 120 SATA devices, four controllers, and
30 devices per controller.
NVMe
Create an NVMe device. You can add up to 60 NVMe devices, four controllers,
and 15 devices per controller.
Set the capacity for the new virtual hard disk.
You can set a size between 0.001 GB and 8 TB for a virtual disk.
7
Specify how to allocate the disk space.
Option
Description
Allocate all disk space now
Allocating all of the disk space when you create the virtual hard disk can enhance
performance, but it requires all of the physical disk space to be available now. If
you do not select this setting, the virtual disk starts small and grows as you add
data to it.
Store virtual disk as a single file
Select this option if the virtual disk is stored on a file system that does not have a
file size limitation.
Split virtual disk into multiple files
Select this option if the virtual disk is stored on a file system that has a file size
limitation. When you split a virtual disk less than 950 GB, a series of 2 GB virtual
disk files are created. When you split a virtual disk greater than 950 GB, two
virtual disk files are created. The maximum size of the first virtual disk file is 1.9
TB and the second virtual disk file stores the rest of the data.
8
Accept the default filename and location, or browse to and select a different location.
9
Click Finish to add the new virtual hard disk.
The wizard creates the new virtual hard disk. The disk appears to the guest operating system as a
new, blank hard disk.
10 Click OK to save your changes.
11 Use the guest operating system tools (such as the Windows Disk Management tool or the fdisk
command in Linux) to partition and format the new drive.
Add an Existing Virtual Hard Disk to a Virtual Machine
You can reconnect an existing virtual hard disk that was removed from a virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select Hard Disk.
4
Select Use an existing virtual disk.
5
Specify the path name and filename for the existing disk file.
6
Click Finish to add the existing virtual hard disk.
VMware, Inc.
94
Using VMware Workstation Player for Windows
7
Click OK to save your changes.
Compact a Virtual Hard Disk
Compacting a virtual hard disk can reclaim unused space in the virtual disk. Modern disks and operating
systems are much more efficient at managing disk space than in the recent past. Therefore, do not expect
the compacting procedure to return large amounts of disk space to the host drive.
Prerequisites
n
Power off the virtual machine.
n
Verify that the virtual disk is not mapped or mounted. You cannot compact a virtual disk while it is
mapped or mounted.
n
Verify that the disk space is not preallocated for the virtual hard disk. If the disk space was
preallocated, you cannot compact the disk.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select the virtual hard disk to compact.
3
Select Utilities > Compact.
4
Click OK after the disk compacting process is complete.
Expand a Virtual Hard Disk
You can add storage space to a virtual machine by expanding its virtual hard disk.
When you expand a virtual hard disk, the added space is not immediately available to the virtual machine.
To make the added space available, you must use a disk management tool to increase the size of the
existing partition on the virtual hard disk to match the expanded size.
The disk management tool that you use depends on the virtual machine guest operating system. Many
operating systems, including Windows Vista, Windows 7, and Windows 8 and some versions of Linux,
provide built-in disk management tools that can resize partitions. Third-party disk management tools are
also available, such as EASEUS Partition Master, Acronis Disk Director, and the open-source tool
GParted.
When you expand the size of a virtual hard disk, the sizes of partitions and file systems are not affected.
As an alternative to expanding a virtual hard disk, you can add a new virtual hard disk to the virtual
machine. See Add a New Virtual Hard Disk to a Virtual Machine.
Prerequisites
n
Power off the virtual machine.
n
Verify that the virtual disk is not mapped or mounted. You cannot expand a virtual disk while it is
mapped or mounted.
VMware, Inc.
95
Using VMware Workstation Player for Windows
n
Verify that the virtual machine has no snapshots.
Note Workstation Player does not support taking snapshots or deleting them.
n
Verify that the virtual machine is not a linked clone or the parent of a linked clone.
You can determine whether a virtual machine is a linked clone by the virtual machine name string on
the summary page. If the string includes "Clone of: virtual machine name", the virtual machine is a
linked clone. If the string includes "Snapshot: Snapshot for virtual machine name", the virtual machine
is a parent of a linked clone.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select the virtual hard disk to expand.
3
Select Utilities > Expand.
4
Set the new maximum size for the virtual disk.
You can set a size between 0.001 GB and 8192 GB for a virtual disk.
5
Select Expand.
6
Click OK after the disk expansion process is complete.
What to do next
Use a disk management tool to increase the disk partition size to match the expanded virtual disk size.
Defragment a Virtual Hard Disk
Like physical disk drives, virtual hard disks can become fragmented. Defragmenting disks rearranges
files, programs, and unused space on the virtual hard disk so that programs run faster and files open
more quickly. Defragmenting does not reclaim unused space on a virtual hard disk.
Defragmenting disks can take considerable time.
Prerequisites
n
Verify that there is adequate free working space on the host system. For example, if the virtual hard
disk is contained in a single file, there must be free space equal to the size of the virtual disk file.
Other virtual hard disk configurations require less free space.
n
Verify that the virtual disk is not mapped or mounted. You cannot defragment a virtual disk while it is
mapped or mounted.
Procedure
1
Run a disk defragmentation utility in the guest operating system.
VMware, Inc.
96
Using VMware Workstation Player for Windows
2
3
If disk space is not preallocated for the virtual hard disk, use the Workstation Player defragmentation
tool to defragment it.
a
Power off the virtual machine.
b
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
c
On the Hardware tab, select Hard Disk.
d
Select Utilities > Defragment.
e
When the defragmentation process is finished, click OK.
Run a disk defragmentation utility on the host system.
Remove a Virtual Hard Disk from a Virtual Machine
Removing a virtual hard disk disconnects it from a virtual machine. It does not delete files from the host
file system.
After you remove a virtual hard disk from a virtual machine, you can map or mount the disk to the host
system and copy data from the guest operating system to the host without powering on the virtual
machine or starting Workstation Player. You can also add the disk to another virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select the virtual hard disk and click Remove.
3
Click OK to save your changes.
Using Lock Files to Prevent Consistency Problems on Virtual Hard
Disks
A running virtual machine creates lock files to prevent consistency problems on virtual hard disks. Without
locks, multiple virtual machines might read and write to the disk, causing data corruption.
Lock files have a .lck suffix and are created in subdirectories in the same directory as the virtual disk
(.vmdk) files. A locking subdirectory and lock file are created for .vmdk files, .vmx files, and .vmem files.
A unified locking method is used on all host operating systems so that files shared between them are fully
protected. For example, if one user on a Linux host tries to power on a virtual machine that is already
powered on by another user with a Windows host, the lock files prevent the second user from powering
on the virtual machine.
When a virtual machine powers off, it removes the locking subdirectories and the lock files. If the virtual
machine cannot remove these locking controls, one or more stale lock files might remain. For example, if
the host system fails before the virtual machine removes its locking controls, stale lock files remain.
VMware, Inc.
97
Using VMware Workstation Player for Windows
When the virtual machine restarts, it scans any locking subdirectories for stale lock files and, when
possible, removes them. A lock file is considered stale if the lock file was created on the same host
system that is now running the virtual machine and the process that created the lock is no longer running.
If either of these conditions is not true, a dialog box warns you that the virtual machine cannot be
powered on. You can delete the locking directories and their lock files manually.
Locks also protect physical disk partitions. Because the host operating system is not aware of this locking
convention, it does not recognize the lock. For this reason, you should install the physical disk for a virtual
machine on the same physical disk as the host operating system.
Moving a Virtual Hard Disk to a New Location
A key advantage of virtual hard disks is their portability. Because the virtual hard disks are stored as files
on the host system or a remote computer, you can move them easily to a new location on the same
computer or to a different computer.
For example, you can use Workstation Player on a Windows host system to create virtual hard disks,
move the disks to a Linux computer, and use the disks with Workstation Player on a Linux host system.
Configuring Virtual Ports
You can add virtual parallel (LPT) ports and virtual serial (COM) ports to a virtual machine. A
Workstation Player virtual machine can use up to three parallel ports and up to four virtual serial ports.
n
Add a Virtual Parallel Port to a Virtual Machine
You can attach up to three bidirectional parallel (LPT) ports to a virtual machine. Virtual parallel ports
can output to parallel ports or to files on the host system.
n
Troubleshoot ECR Errors for Parallel Ports
A parallel port on the host system does not have an Extended Control Register (ECR).
n
Add a Virtual Serial Port to a Virtual Machine
You can add up to four serial (COM) ports to a virtual machine. Virtual serial ports can output to
physical serial ports, files, or named pipes.
n
Change the Input Speed of a Serial Connection
You can increase the speed of a serial connection over a pipe to a virtual machine.
Add a Virtual Parallel Port to a Virtual Machine
You can attach up to three bidirectional parallel (LPT) ports to a virtual machine. Virtual parallel ports can
output to parallel ports or to files on the host system.
Parallel ports are used for a variety of devices, including printers, scanners, dongles, and disk drives.
Although these devices can connect to the host system, only printers can reliably connect to virtual
machines by using parallel ports.
VMware, Inc.
98
Using VMware Workstation Player for Windows
Workstation Player provides only partial emulation of PS/2 hardware. Interrupts that a device connected
to a physical port requests are not passed to the virtual machine. The guest operating system cannot use
direct memory access (DMA) to move data to or from the port. For this reason, not all devices that attach
to a parallel port work correctly. Do not use virtual parallel ports to connect parallel port storage devices or
other types of parallel port devices to a virtual machine.
Prerequisites
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, click Add.
3
In the New Hardware wizard, select Parallel Port.
4
Click Finish to add the virtual parallel port to the virtual machine.
5
Select where the virtual parallel port sends output.
6
Option
Description
Use a physical parallel port
Select a parallel port on the host system.
Use output file
Send output from the virtual parallel port to a file on the host system. Either locate
an existing output file or browse to a directory and type a filename to create a new
output file.
To connect the virtual parallel port to the virtual machine when the virtual machine powers on, select
Connect at power on.
When a parallel port is configured for a virtual machine, most guest operating systems detect the port at
installation time and install the required drivers. Some operating systems, including Linux, detect the ports
at boot time.
Troubleshoot ECR Errors for Parallel Ports
A parallel port on the host system does not have an Extended Control Register (ECR).
Problem
When you power on a virtual machine after adding a parallel port, an error messages states that the
parallel port on the host system does not have an ECR.
Cause
This problem can occur when the hardware supports ECR, but ECR has been disabled in the BIOS.
Solution
1
Reboot the host system.
2
Early in the boot process, press and hold down the Delete key to enter the BIOS configuration editor.
VMware, Inc.
99
Using VMware Workstation Player for Windows
3
Find the parallel port field and enable Extended Capability Port (ECP) mode or a combination of
modes that includes ECP.
Most modern computers support ECP mode.
Add a Virtual Serial Port to a Virtual Machine
You can add up to four serial (COM) ports to a virtual machine. Virtual serial ports can output to physical
serial ports, files, or named pipes.
You might want to add a virtual serial port to a virtual machine to make devices such as modems and
printers available to the virtual machine. You can also use virtual ports to send debugging data from a
virtual machine to the host system or to another virtual machine.
Note The virtual printer feature configures a serial port to make host printers available to the guest. You
do not need to install additional drivers in the virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select Serial Port.
4
Click Finish to add the virtual serial port to the virtual machine.
5
Select where the virtual serial port sends output.
Option
Description
Use a physical parallel port
Send output to a physical serial port on the host system.
Use output file
Send output to a file on the host system. Either locate an existing output file or
browse to a directory and type a filename to create a new output file.
Output to named pipe
Set up a direct connection between two virtual machines, or a connection
between a virtual machine and an application on the host system.
VMware, Inc.
100
Using VMware Workstation Player for Windows
6
If you selected Output to named pipe, configure the named pipe.
a
Use the default pipe name, or type another pipe name.
The pipe name must begin with \\.\pipe\ and must be the same on both the server and the
client.
For example: \\.\pipe\namedpipe
b
To send debugging information to an application on the host system, select This end is the
server from the first drop-down menu and select The other end is an application from the
second drop-down menu.
c
To send debugging information to another virtual machine, select This end is the server from the
first drop-down menu and The other end is a virtual machine from the second drop-down
menu.
7
To connect the port to the virtual machine when the virtual machine powers on, select Connect at
power on.
8
(Optional) On the Hardware tab, select the new serial port, select Yield CPU on poll, and click OK.
This option is useful if you are using debugging tools that communicate over a serial connection. If
the serial port in the guest operating system is being used in polled mode rather than interrupt mode,
you might notice performance issues. This option forces the virtual machine to yield processor time if
the only task it is trying to do is poll the virtual serial port.
What to do next
If you set up a connection between two virtual machines, the first virtual machine is set up as the server.
Repeat this procedure for the second virtual machine, but set it up as the client by selecting This end is
the client when you configure the named pipe.
Change the Input Speed of a Serial Connection
You can increase the speed of a serial connection over a pipe to a virtual machine.
In principle, the output speed, which is the speed at which the virtual machine sends data through the
virtual serial port, is unlimited. In practice, the output speed depends on how fast the application at the
other end of the pipe reads inbound data.
Prerequisites
n
Use the guest operating system to configure the serial port for the highest setting supported by the
application that you are running in the virtual machine.
n
Power off the virtual machine and exit Workstation Player.
Procedure
1
In a text editor, add the following line to the virtual machine configuration (.vmx) file.
serialport_number.pipe.charTimePercent = "time"
VMware, Inc.
101
Using VMware Workstation Player for Windows
port_number is the number of the serial port, starting from 0. The first serial port is serial0. time is a
positive integer that specifies the time taken to transmit a character, expressed as a percentage of the
default speed set for the serial port in the guest operating system. For example, a setting of 200
forces the port to take twice as long for each character, or send data at half the default speed. A
setting of 50 forces the port to take only half as long for each character, or send data at twice the
default speed.
2
Assuming that the serial port speed is set appropriately in the guest operating system, experiment
with this setting by starting with a value of 100 and gradually decreasing it until you find the highest
speed at which the connection works reliably.
Configuring Generic SCSI Devices
The generic SCSI feature gives the guest operating system direct access to SCSI devices that are
connected to the host system, including scanners, tape drives, and other data storage devices. A virtual
machine can use the generic SCSI driver to run any SCSI device that is supported by the guest operating
system.
To use SCSI devices in a virtual machine running on a Windows host system, you must run
Workstation Player as a user who has administrator access.
Although generic SCSI is device independent, it can be sensitive to the guest operating system, device
class, and specific SCSI hardware.
n
Add a Generic SCSI Device to a Virtual Machine
You must add a generic SCSI device to the virtual machine to map virtual SCSI devices on a virtual
machine to physical generic SCSI devices on the host system. You can add up to 60 generic SCSI
devices to a virtual machine.
n
Troubleshoot Problems Detecting Generic SCSI Devices
When you add a generic SCSI device to a virtual machine, the device does not appear in the list of
available SCSI devices.
Add a Generic SCSI Device to a Virtual Machine
You must add a generic SCSI device to the virtual machine to map virtual SCSI devices on a virtual
machine to physical generic SCSI devices on the host system. You can add up to 60 generic SCSI
devices to a virtual machine.
Prerequisites
n
On a Windows host system, run Workstation Player as a user who has administrator access.
n
On a 32-bit Windows XP virtual machine, install the special SCSI driver that VMware provides. You
can download the driver from the VMware Web site.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
VMware, Inc.
102
Using VMware Workstation Player for Windows
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select Generic SCSI Device.
4
Click Finish to add the device.
5
Select the physical SCSI device to map to the virtual SCSI device.
6
To connect the device when the virtual machine powers on, select Connect at power on.
7
On the Hardware tab, select the SCSI device identifier to use for the device from the Virtual device
node drop-down menu and click OK.
For example, if you select SCSI 0:2, the guest operating system sees the drive as ID 2 on controller
0.
Troubleshoot Problems Detecting Generic SCSI Devices
When you add a generic SCSI device to a virtual machine, the device does not appear in the list of
available SCSI devices.
Problem
The SCSI device does not appear in the list of available SCSI devices after you add it to a virtual
machine.
Cause
A driver for that device is not installed on the host system, a driver on the host system prevents the
device from being detected, or the virtual machine uses a device for which there are no drivers available
to the host operating system.
Solution
1
Determine the SCSI bus number that the device uses on the host system.
The SCSI bus is assigned a number by the host operating system after all IDE buses are assigned
numbers. For example, if you have two IDE buses, they are numbered 0 and 1. The first SCSI bus is
assigned bus number 2. You can use a third-party tool, such as winobj, to determine the SCSI bus
number.
2
Determine the target ID that the device uses in the virtual machine and on the host system.
This ID is usually set by some jumpers or switches on the device.
3
Determine whether the device driver for the device is installed on the host system.
If the device driver is not installed, install it and see if the device appears. To avoid a device-in-use
conflict between the host and guest, you might not want to install the driver on the host system.
4
If an original SCSI device driver is already installed on the host system, disable it.
Some Windows operating systems do not process the send command from the adapter if the device
driver owns the device.
5
Power off the virtual machine and open the virtual machine configuration (.vmx) file in a text editor.
VMware, Inc.
103
Using VMware Workstation Player for Windows
6
Add or change the following line in the virtual machine configuration (.vmx) file.
scsiZ:Y.fileName = "deviceName"
Z is the SCSI bus number the device uses in the virtual machine. For deviceName, use scsiX:Y,
where X is the SCSI bus number that the device uses on the host system and Y is the target ID that
the device uses in both the virtual machine and on the host system.
For example, if the problematic device is a CD-ROM drive, the existing entry is
scsi0:4.fileName = "CdRom0" and the device on the host system is located on bus 2 with target
ID 4, change the line to scsi0:4.fileName = "scsi2:4".
7
If the virtual machine does not contain any SCSI devices, to add a generic SCSI device to a new
virtual SCSI adapter, or to use an existing SCSI device as a generic SCSI device, add the following
line to the virtual machine configuration (.vmx) file.
scsiZ:Y.deviceType = "scsi-passthru"
8
If the virtual machine does not contain any SCSI devices, or to add a generic SCSI device to a new
virtual SCSI adapter, add the following lines to the virtual machine configuration (.vmx) file.
scsiZ:Y.present = "true"
scsiZ.present = "true"
Configuring Sixteen-Way Virtual Symmetric
Multiprocessing
With virtual symmetric multiprocessing (SMP), you can assign processors and cores per processor to a
virtual machine on any host system that has at least two logical processors.
Workstation Player considers multiprocessor hosts that have two or more physical CPUs, singleprocessor hosts that have a multicore CPU, and single-processor hosts that have hyperthreading
enabled, to have two logical processors.
Note On hyperthreaded uniprocessor hosts, performance of virtual machines that have virtual SMP
might be below normal. Even on multiprocessor hosts, performance is affected if you overcommit by
running multiple workloads that require more total CPU resources than are physically available.
You can power on and run multiple dual-processor virtual machines concurrently. The number of
processors for a given virtual machine appears in the summary view of the virtual machine.
Configure Sixteen-Way Virtual Symmetric Multiprocessing
You can configure sixteen-way virtual symmetric multiprocessing (SMP) for an existing virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Processors.
VMware, Inc.
104
Using VMware Workstation Player for Windows
3
Change the Number of processors setting to 16.
4
Click OK to save your changes.
Use a Virtual Machine That Has More Than Sixteen Virtual
Processors
If Workstation Player is running on a multiprocessor host system, you can open a virtual machine that has
more than 16 virtual processors assigned to it. You must change the number of processors before
powering on the virtual machine.
You can see the number of processors in the virtual machine summary view or by viewing the virtual
machine hardware settings.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Processors.
Note that Number of processors is set to Other (x), where x is the number of processors originally
assigned to it. Workstation Player preserves this original configuration setting for the number of
processors, even though eight is the maximum number of processors supported.
3
Change the Number of processors setting to 1, 2, 4, 8, or 16.
After you commit a change to this setting, the original setting for the number of processors is
discarded and no longer appears as an option.
4
Click OK to save your changes.
Configuring Keyboard Features
You can change key combinations for hot-key sequences in Workstation Player and the language for the
keyboard that VNC clients use. You can also configure platform-specific keyboard features for Windows
and Linux host systems.
n
Use the Enhanced Virtual Keyboard Feature in a Virtual Machine
The enhanced virtual keyboard feature provides better handling of international keyboards and
keyboards that have extra keys. This feature is available only on Windows host systems.
n
Use Ctrl+Alt in a Key Combination
Because Ctrl+Alt tells Workstation Player to release mouse and keyboard input, hot-key
combinations that include Ctrl+Alt are not passed to the guest operating system. You must use the
Space key if the key combination includes Ctrl+Alt.
VMware, Inc.
105
Using VMware Workstation Player for Windows
n
Configure Keyboard Mapping for a Remote X Server
Although the keyboard works correctly with a local X server, it might not work correctly when you run
the same virtual machine with a remote X server.
n
Change How a Specific Key Is Mapped
If some keys on the keyboard do not work correctly in a virtual machine, you can set a property that
makes a modification to the map. To change how a specific key is mapped, you add the appropriate
property to the virtual machine configuration (.vmx) file or to ~/.vmware/config.
n
Configure How Keysyms Are Mapped
When key code mapping cannot be used or is disabled, Workstation Player maps keysyms to v-scan
codes. If a language-specific keyboard does not appear to be supported by Workstation Player, you
might need to set a property that tells Workstation Player which keysym table to use.
n
V-Scan Code Table
You specify v-scan codes when you change how keys or keysyms are mapped.
Use the Enhanced Virtual Keyboard Feature in a Virtual Machine
The enhanced virtual keyboard feature provides better handling of international keyboards and keyboards
that have extra keys. This feature is available only on Windows host systems.
Because it processes raw keyboard input as soon as possible, the enhanced virtual keyboard feature also
offers security improvements by bypassing Windows keystroke processing and any malware that is not
already at a lower layer. When you use the enhanced virtual keyboard feature, only the guest operating
system acts when you press Ctrl+Alt+Delete.
Prerequisites
n
If you recently installed or upgraded Workstation Player, but did not restart the host system, restart
the host system.
n
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select General.
3
Select an option from the Enhanced virtual keyboard drop-down menu.
Option
Description
Off
The virtual machine does not use the enhanced virtual keyboard feature. This is
the default value.
Use if available (recommended)
The virtual machine uses the enhanced virtual keyboard feature, but only if the
enhanced virtual keyboard driver is installed on the host system.
Required
The virtual machine must use the enhanced the virtual keyboard feature. If you
select this option and the enhanced keyboard driver is not installed on the host
system, Workstation Player returns an error message.
VMware, Inc.
106
Using VMware Workstation Player for Windows
4
Click OK to save your changes.
Install the Enhanced Keyboard Driver on a Windows Host
To use the enhanced virtual keyboard feature in a virtual machine, you must install the enhanced
keyboard driver on the Windows host system. If you did not install the enhanced keyboard driver when
you initially installed or upgraded Workstation Player, you can install it by running the Workstation Player
installer in program maintenance mode.
Prerequisites
Verify that you have administrative privileges on the host system.
Procedure
1
Log in to the Windows host system as the Administrator user or as a user who is a member of the
local Administrators group.
If you log in to a domain, the domain account must also be a local administrator.
2
Double-click the VMware-player-xxxx-xxxxxxx.exe file, where xxxx-xxxxxxx is the version and
build numbers.
3
Select Modify/Change.
4
Select Enhanced Keyboard Utility.
5
Follow the prompts to finish the installation.
What to do next
Enable the enhanced virtual keyboard feature for the virtual machine. See Use the Enhanced Virtual
Keyboard Feature in a Virtual Machine.
Use Ctrl+Alt in a Key Combination
Because Ctrl+Alt tells Workstation Player to release mouse and keyboard input, hot-key combinations
that include Ctrl+Alt are not passed to the guest operating system. You must use the Space key if the key
combination includes Ctrl+Alt.
Procedure
1
Press Ctrl+Alt+spacebar.
2
Release the spacebar without releasing Ctrl and Alt.
3
Press the third key of the key combination to send to the guest operating system.
Configure Keyboard Mapping for a Remote X Server
Although the keyboard works correctly with a local X server, it might not work correctly when you run the
same virtual machine with a remote X server.
VMware, Inc.
107
Using VMware Workstation Player for Windows
For local X servers, Workstation Player maps X key codes to PC scan codes to correctly identify a key.
Because it cannot tell whether a remote X server is running on a PC or on some other kind of computer,
Workstation Player uses this key code map only for local X servers. You can set a property to tell
Workstation Player to use key code mapping. See Understanding X-Key Codes and Keysyms for more
information.
To configure a keyboard mapping for a remote X server, you add the appropriate property to the virtual
machine configuration (.vmx) file or to ~/.vmware/config.
Prerequisites
n
Verify that the remote X server is an XFree86 server running on a PC.
n
Power off the virtual machine and exit Workstation Player.
Note If the keyboard does not work correctly on an XFree86 server running locally, report the problem to
VMware technical support.
Procedure
n
If you use an XFree86-based server that Workstation Player does not recognize as an XFree86
server, add the xkeymap.usekeycodeMap property and set it to TRUE.
This property tells Workstation Player to always use key code mapping regardless of server type.
For example: xkeymap.usekeycodeMap = "TRUE"
n
If Workstation Player does not recognize the remote server as an XFree86 server, add the
xkeymap.usekeycodeMapIfXFree86 property and set it to TRUE.
This property tells Workstation Player to use key code mapping if you are using an XFree86 server,
even if it is remote.
For example: usekeycodeMapIfXFree86 = "TRUE"
Understanding X-Key Codes and Keysyms
Pressing a key on a PC keyboard generates a PC scan code based roughly on the position of the key.
For example, the Z key on a German keyboard generates the same code as the Y key on an English
keyboard because they are in the same position on the keyboard. Most keys have one-byte scan codes,
but some keys have two-byte scan codes with prefix 0xe0.
Internally, Workstation Player uses a simplified version of the PC scan code that is a single nine-bit
numeric value, called a v-scan code. A v-scan code is written as a three-digit hexadecimal number. The
first digit is 0 or 1. For example, the Ctrl key on the left side of the keyboard has a one-byte scan code
(0x1d) and its v-scan code is 0x01d. The Ctrl key scan code on the right side of the keyboard is two bytes
(0xe0, 0x1d) and its v-scan code is 0x11d.
VMware, Inc.
108
Using VMware Workstation Player for Windows
An XFree86 server on a PC has a one-to-one mapping from X key codes to PC scan codes, or v-scan
codes, which is what Workstation Player uses. When Workstation Player is hosted on an XFree86 server
and runs a local virtual machine, it uses the built-in mapping from X key codes to v-scan codes. This
mapping is keyboard independent and should be correct for most languages. In other cases (not an
XFree86 server or not a local server), Workstation Player must map keysyms to v-scan codes by using a
set of keyboard-specific tables.
An X server uses a two-level encoding of keys, which includes the X key code and the keysym. An X key
code is a one-byte value. The assignment of key codes to keys depends on the X server implementation
and the physical keyboard. As a result, an X application normally cannot use key codes directly. Instead,
the key codes are mapped into keysyms that have names like space, escape, x and 2. You can use an X
application to control the mapping by using the function XChangeKeyboardMapping() or by the program
xmodmap. To explore keyboard mappings, you can use the xev command, which shows the key codes
and keysyms for keys typed into its window.
A key code corresponds roughly to a physical key, while a keysym corresponds to the symbol on the key
top. For example, with an XFree86 server running on a PC, the Z key on the German keyboard has the
same key code as the Y key on an English keyboard. The German Z keysym, however, is the same as
the English Z keysym, and different from the English Y keysym.
Change How a Specific Key Is Mapped
If some keys on the keyboard do not work correctly in a virtual machine, you can set a property that
makes a modification to the map. To change how a specific key is mapped, you add the appropriate
property to the virtual machine configuration (.vmx) file or to ~/.vmware/config.
Prerequisites
n
Verify that the X server is an XFree86 server running on a PC. If the X server is remote, configure it to
use key code mapping. See Configure Keyboard Mapping for a Remote X Server.
n
Determine the X key code and the corresponding v-scan code for the key. To find the X key code for a
key, run xev or xmodmap -pk. See V-Scan Code Table for most v-scan codes.
n
Power off the virtual machine and exit Workstation Player.
Procedure
1
Open .vmx or ~/.vmware/config in a text editor.
2
Add the xkeymap.keycode.code property and set it to the v-scan code.
code must be a decimal number and the v-scan code must be a C-syntax hexadecimal number, such
as 0x001.
In this example, the properties swap left Ctrl and Caps Lock.
xkeymap.keycode.64 = "0x01d # X Caps_Lock -> VM left ctrl"
xkeymap.keycode.37 = "0x03a # X Control_L -> VM caps lock"
VMware, Inc.
109
Using VMware Workstation Player for Windows
Configure How Keysyms Are Mapped
When key code mapping cannot be used or is disabled, Workstation Player maps keysyms to v-scan
codes. If a language-specific keyboard does not appear to be supported by Workstation Player, you might
need to set a property that tells Workstation Player which keysym table to use.
Workstation Player determines which table to use by examining the current X keymap. However, its
decision-making process can sometimes fail. In addition, each mapping is fixed and might not be
completely correct for any given keyboard and X key code-to-keysym mapping. For example, if a user
uses xmodmap to swap Ctrl and Caps Lock by, the keys are swapped in the virtual machine when using a
remote server (keysym mapping), but are unswapped when using a local server (key code mapping). To
correct this situation, you must remap the keys in Workstation Player.
To configure how keysyms are mapped, you add one or more properties to the virtual machine
configuration (.vmx) file or to ~/.vmware/config.
Prerequisites
n
To change the mapping of a few keys, determine the keysym name for each key. To find a keysym
name, use the xev or xmodmap -pk command. The X header file /usr/include/X11/keysymdef.h
also has a complete list of keysyms. The name of a keysym is the same as its C constant, but without
the XK_ prefix.
n
To use a different keysym table, determine which mapping table to use. The tables are located in the
xkeymap directory in the Workstation Player installation directory, which is usually /usr/lib/vmware.
The table you must use depends on the keyboard layout. The normal distribution includes tables for
PC keyboards for the United States and a number of European countries and languages. For most of
these, both the 101-key (or 102-key) and the 104-key (or 105-key) variants are available.
If none of the mapping tables is completely correct, find one that works best, copy it to a new location,
and change the individual keysym mappings.
n
Familiarize yourself with the v-scan codes. See V-Scan Code Table.
n
Power off the virtual machine and exit Workstation Player.
Procedure
n
To disable X key code mapping to map keysyms rather than key codes to v-scan codes, add the
xkeymap.nokeycodeMap property and set it to TRUE.
For example: xkeymap.nokeycodeMap = "TRUE"
n
If Workstation Player has a table in the xkeymap directory for your keyboard but cannot detect it, add
the xkeymap.language property and set it to one of the tables in the xkeymap directory.
For example: xkeymap.language = "keyboard_type"
If the failure to detect the keyboard means that the table is not completely correct for you, you might
need to create a modified table and use the xkeymap.fileName property instead.
VMware, Inc.
110
Using VMware Workstation Player for Windows
n
To use a different keysym mapping table that is not in the xkeymap directory, add the
xkeymap.fileName property and set it to the path to the table.
For example: xkeymap.fileName = "file_path"
The table must list a keysym for each key by using the form sym="v-scan_code", where the sym
value is an X keysym name and v-scan_code is a C-syntax hexadecimal number, for example, 0x001.
Use a new line for each keysym.
Note Because compiling a complete keysym mapping is difficult, you should usually edit an existing
table and make small changes.
n
To change the keysym mapping of a few keys, type the xkeymap.keysym property for each key, on
separate lines.
For example: xkeymap.keysym.sym = "v-scan_code"
The value of sym must be an X keysym name and v-scan_code is a C-syntax hexadecimal number,
for example, 0x001.
V-Scan Code Table
You specify v-scan codes when you change how keys or keysyms are mapped.
Following are the v-scan codes for the 104-key U.S. keyboard.
Table 11‑1. V-Scan Codes for the 104-Key U.S. Keyboard
Symbol
Shifted Symbol
Esc
Location
V-Scan Code
0x001
1
!
0x002
2
@
0x003
3
#
0x004
4
$
0x005
5
%
0x006
6
^
0x007
7
&
0x008
8
*
0x009
9
(
0x00a
0
)
0x00b
-
_
0x00c
=
+
0x00d
Backspace
0x00e
Tab
0x00f
Q
0x010
VMware, Inc.
111
Using VMware Workstation Player for Windows
Table 11‑1. V-Scan Codes for the 104-Key U.S. Keyboard (Continued)
Symbol
Shifted Symbol
Location
V-Scan Code
W
0x011
E
0x012
R
0x013
T
0x014
Y
0x015
U
0x016
I
0x017
O
0x018
P
0x019
[
{
0x01a
]
}
0x01b
Enter
0x01c
Ctrl
left
0x01d
A
0x01e
S
0x01f
D
0x020
F
0x021
G
0x022
H
0x023
J
0x024
K
0x025
L
0x026
;
0x027
'
0x028
`
0x029
Shift
\
left
|
0x02a
0x02b
Z
0x02c
X
0x02d
C
0x02e
V
0x02f
B
0x030
N
0x031
M
0x032
VMware, Inc.
112
Using VMware Workstation Player for Windows
Table 11‑1. V-Scan Codes for the 104-Key U.S. Keyboard (Continued)
Symbol
Shifted Symbol
Location
V-Scan Code
,
<
0x033
.
>
0x034
/
?
0x035
Shift
right
0x036
*
numeric pad
0x037
Alt
left
0x038
Space bar
0x039
Caps Lock
0x03a
F1
0x03b
F2
0x03c
F3
0x03d
F4
0x03e
F5
0x03f
F6
0x040
F7
0x041
F8
0x042
F9
0x043
F10
0x044
Num Lock
numeric pad
Scroll Lock
0x045
0x046
Home
7
numeric pad
0x047
Up arrow
8
numeric pad
0x048
PgUp
9
numeric pad
0x049
numeric pad
0x04a
numeric pad
0x04b
numeric pad
0x04c
numeric pad
0x04d
numeric pad
0x04e
Left arrow
4
5
Right arrow
6
+
End
1
numeric pad
0x04f
Down arrow
2
numeric pad
0x050
PgDn
3
numeric pad
0x051
Ins
0
numeric pad
0x052
numeric pad
0x053
Del
F11
VMware, Inc.
0x057
113
Using VMware Workstation Player for Windows
Table 11‑1. V-Scan Codes for the 104-Key U.S. Keyboard (Continued)
Symbol
Shifted Symbol
Location
F12
V-Scan Code
0x058
Break
Pause
0x100
Enter
numeric pad
0x11c
Ctrl
right
0x11d
/
numeric pad
0x135
SysRq
Print Scrn
0x137
Alt
right
0x138
Home
function pad
0x147
Up arrow
function pad
0x148
Page Up
function pad
0x149
Left arrow
function pad
0x14b
Right arrow
function pad
0x14d
End
function pad
0x14f
Down arrow
function pad
0x150
Page Down
function pad
0x151
Insert
function pad
0x152
Delete
function pad
0x153
Windows
left
0x15b
Windows
right
0x15c
Menu
0x15d
The 84-key keyboard has a Sys Req key on the numeric pad. Its v-scan code is 0x054.
Keyboards outside the U.S. usually have an extra key (often < > or < > |) next to the left Shift key. The vscan code for this key is 0x056.
Modify Hardware Settings for a Virtual Machine
You can modify memory, processor, virtual and physical hard disk, CD-ROM and DVD drive, floppy drive,
virtual network adapter, USB controller, sound card, serial port, generic SCSI device, printer, and display
settings for a virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
Click the Hardware tab.
3
Select the hardware setting to modify.
VMware, Inc.
114
Using VMware Workstation Player for Windows
4
Click Help for information about how to modify the hardware setting.
You must power off a virtual machine before you change certain hardware settings.
VMware, Inc.
115
Configuring Network
Connections
12
Workstation Player provides bridged networking, network address translation (NAT), and host-only
networking to configure a virtual machine for virtual networking. The software that you need for all
networking configurations is installed on the host system when you install Workstation Player
This chapter includes the following topics:
n
Understanding Virtual Networking Components
n
Understanding Common Networking Configurations
n
Configuring Bridged Networking
n
Configuring Network Address Translation
n
Configuring Host-Only Networking
n
Changing a Networking Configuration
Understanding Virtual Networking Components
The virtual networking components in Workstation Player include virtual switches, virtual network
adapters, the virtual DHCP server, and the NAT device.
Virtual Switches
Like a physical switch, a virtual switch connects networking components together. Virtual switches, which
are also referred to as virtual networks, are named VMnet0, VMnet1, VMnet2, and so on. A few virtual
switches are mapped to specific networks by default.
Table 12‑1. Default Virtual Network Switches
Network Type
Switch Name
Bridged
VMnet0
NAT
VMnet8
Host-only
VMnet1
VMware, Inc.
116
Using VMware Workstation Player for Windows
Workstation Player creates virtual switches as needed, up to 20 virtual switches on a Windows host
system and up to 255 virtual switches on a Linux host system. You can connect an unlimited number of
virtual network devices to a virtual switch on a Windows host system and up to 32 virtual network devices
to a virtual switch on a Linux host system.
Note On Linux host systems, the virtual switch names are in all lowercase letters, for example, vmnet0.
Virtual Network Adapters
When you use the New Virtual Machine wizard to create a new virtual machine, the wizard creates a
virtual network adapter for the virtual machine. The virtual network adapter appears in the guest operating
system as an AMD PCNET PCI adapter, Intel Pro/1000 MT Server Adapter, or Intel 82574L Gigabit
Network Connection. In Windows Vista, Windows 7, and Windows 8 guest operating systems, the adapter
is an Intel Pro/1000 MT Server Adapter. In Windows 8.1 and Windows10 guest operation systems, the
adapter is an Intel 82574L Gigabit Network Connection.
Player 3.x and later virtual machines can have up to 10 virtual network adapters.
Virtual DHCP Server
The virtual Dynamic Host Configuration Protocol (DHCP) server provides IP addresses to virtual
machines in configurations that are not bridged to an external network. For example, the virtual DHCP
server assigns IP addresses to virtual machines in host-only and NAT configurations.
NAT Device
In a NAT configuration, the NAT device passes network data between one or more virtual machines and
the external network, identifies incoming data packets intended for each virtual machine, and sends them
to the correct destination.
Understanding Common Networking Configurations
You can configure bridged networking, NAT, and host-only networking for virtual machines. You can also
use the virtual networking components to create sophisticated custom virtual networks.
Creating custom networks is available only on virtual machines that are created in Workstation Player.
Although you cannot configure custom networking in Workstation Player, you can run a virtual machine
that has custom networking in Workstation Player.
Bridged Networking
Bridged networking connects a virtual machine to a network by using the network adapter on the host
system. If the host system is on a network, bridged networking is often the easiest way to give the virtual
machine access to that network.
When you install Workstation Player on a Windows or Linux host system, a bridged network (VMnet0) is
set up for you. See Configuring Bridged Networking.
VMware, Inc.
117
Using VMware Workstation Player for Windows
NAT Networking
With NAT, a virtual machine does not have its own IP address on the external network. Instead, a
separate private network is set up on the host system. In the default configuration, a virtual machine gets
an address on this private network from the virtual DHCP server. The virtual machine and the host system
share a single network identity that is not visible on the external network.
When you install Workstation Player on a Windows or Linux host system, a NAT network (VMnet8) is set
up for you. When you use the New Virtual Machine wizard to create a new virtual machine and select
the typical configuration type, the wizard configures the virtual machine to use the default NAT network.
You can have only one NAT network. See Configuring Network Address Translation.
Host-Only Networking
Host-only networking creates a network that is completely contained within the host computer. Host-only
networking provides a network connection between the virtual machine and the host system by using a
virtual network adapter that is visible on the host operating system.
When you install Workstation Player on a Windows or Linux host system, a host-only network (VMnet1) is
set up for you. See Configuring Host-Only Networking.
Configuring Bridged Networking
When you install Workstation Player on a Windows or Linux host system, a bridged network (VMnet0) is
set up for you. Bridged networking connects a virtual machine to a network by using the network adapter
on the host system. If the host system is on a network, bridged networking is often the easiest way to give
the virtual machine access to that network.
With bridged networking, the virtual network adapter in the virtual machine connects to a physical network
adapter in the host system. The host network adapter enables the virtual machine to connect to the LAN
that the host system uses. Bridged networking works with both wired and wireless host network adapters.
Bridged networking configures the virtual machine as a unique identity on the network, separate from and
unrelated to the host system. The virtual machine is a full participant in the network. It has access to other
machines on the network, and other machines on the network can contact it as if it were a physical
computer on the network.
VMware, Inc.
118
Using VMware Workstation Player for Windows
Figure 12‑1. Bridged Networking Configuration
virtual
network
adapter
virtual machine
virtual network switch
(VMnet0)
virtual bridge
host
network
adapter
You can view and change the settings for bridged networking on the host system, determine which
network adapters to use for bridged networking, and map specific host network adapters to specific virtual
switches.
Assigning IP Addresses in a Bridged Networking Environment
A virtual machine must have its own identity on a bridged network. For example, on a TCP/IP network,
the virtual machine needs its own IP address. Your network administrator can tell you whether IP
addresses are available for virtual machines and which networking settings to use in the guest operating
system.
Typically, the guest operating system can acquire an IP address and other network details from a DHCP
server, but you might need to set the IP address and other details manually in the guest operating
system.
Users who boot multiple operating systems often assign the same address to all systems because they
assume that only one operating system will be running at a time. If the host system is set up to boot
multiple operating systems, and you run one or more operating systems in virtual machines, you must
configure each operating system to have a unique network address.
Configure Bridged Networking for an Existing Virtual Machine
You can configure bridged networking for an existing virtual machine.
To configure bridged networking for a new virtual machine, select Customize Hardware when you run
the New Virtual Machine wizard.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Network Adapter.
3
Select Bridged: Connected directly to the physical network.
VMware, Inc.
119
Using VMware Workstation Player for Windows
4
If you use the virtual machine on a laptop or other mobile device, select Replicate physical network
connection state.
This setting causes the IP address to be renewed when you move from one wired or wireless network
to another.
5
Click OK to save your changes.
Configuring Network Address Translation
When you install Workstation Player on a Windows or Linux host system, a NAT network (VMnet8) is set
up for you. When you use the New Virtual Machine wizard to create a typical virtual machine, the wizard
configures the virtual machine to use the default NAT network.
With NAT, a virtual machine does not have its own IP address on the external network. Instead, a
separate private network is set up on the host system. In the default configuration, virtual machines get
an address on this private network from the virtual DHCP server.
Figure 12‑2. NAT Configuration
virtual
network
adapter
virtual network switch
(VMnet8)
virtual machine
NAT
device
DHCP server
network
The virtual machine and the host system share a single network identity that is not visible on the external
network. NAT works by translating the IP addresses of virtual machines in the private network to the IP
address of the host system. When a virtual machine sends a request to access a network resource, it
appears to the network resource as if the request is coming from the host system.
The host system has a virtual network adapter on the NAT network. This adapter enables the host system
and virtual machines to communicate with each other. The NAT device passes network data between one
or more virtual machines and the external network, identifies incoming data packets intended for each
virtual machine, and sends them to the correct destination.
Configuring Host-Only Networking
When you install Workstation Player on a Windows or Linux host system, a host-only network (VMnet1) is
set up for you. Host-only networking is useful if you need to set up an isolated virtual network. In a hostonly network, the virtual machine and the host virtual network adapter are connected to a private Ethernet
network. The network is completely contained within the host system.
The network connection between the virtual machine and the host system is provided by a virtual network
adapter that is visible on the host operating system. The virtual DHCP server provides IP addresses on
the host-only network.
VMware, Inc.
120
Using VMware Workstation Player for Windows
Figure 12‑3. Host-Only Networking Configuration
virtual
network
adapter
virtual machine
virtual network switch
(VMnet1)
host
network
adapter
DHCP server
In the default configuration, a virtual machine in a host-only network cannot connect to the Internet. If you
install the proper routing or proxy software on the host system, you can establish a connection between
the host virtual network adapter and a physical network adapter on the host system to connect the virtual
machine to a Token Ring or other non-Ethernet network.
On a Windows host computer, you can use host-only networking in combination with the Internet
Connection Sharing feature in Windows to allow a virtual machine to use the dial-up networking adapter
or other connection to the Internet on the host system. See Microsoft documentation for information on
configuring Internet Connection Sharing.
Configure Host-Only Networking for an Existing Virtual Machine
You can configure host-only networking for an existing virtual machine. You can connect a virtual network
adapter to the default host-only network (VMnet1) or to a custom host-only network. If a virtual machine
has two virtual network adapters, you can connect it to two host-only networks.
To configure host-only networking for a new virtual machine, select Customize Hardware when you run
the New Virtual Machine wizard.
Prerequisites
To connect the virtual machine to two host-only networks, add a second virtual network adapter to the
virtual machine. See Add a Virtual Network Adapter to a Virtual Machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab select a virtual network adapter.
3
Select the host-only network.
Option
Action
Use the default host-only network
(VMnet1)
Select Host-only: A private network shared with the host.
Use a custom host-only network
Select Custom and select the custom host-only network from the drop-down
menu.
VMware, Inc.
121
Using VMware Workstation Player for Windows
4
To connect the virtual machine to a second host-only network, select another virtual network adapter
and select the second host-only network.
5
Click OK to save your changes.
What to do next
Assign IP addresses to the virtual network adapters. To see the IP address that a host-only network is
using, use the ipconfig /all command on the Windows host.
Changing a Networking Configuration
You can determine the type of network that a virtual machine is using, add virtual network adapters to a
virtual machine, and change the configuration of existing virtual network adapters.
Find the Network Type of a Virtual Machine
Unless you configure a custom network connection, a virtual machine uses a bridged, NAT, or host-only
network connection. When you use the New Virtual Machine wizard to create a virtual machine, the new
virtual machine defaults to using the NAT network type.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Network Adapter.
Add a Virtual Network Adapter to a Virtual Machine
You can add up to 10 virtual network adapters to a virtual machine.
Prerequisites
Familiarize yourself with the network configuration types. See Understanding Common Networking
Configurations.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, click Add.
3
To add the virtual network adapter to the virtual machine, select Network Adapter and click Finish.
VMware, Inc.
122
Using VMware Workstation Player for Windows
4
Select the virtual network adapter type.
Option
Description
Bridged
The virtual machine is connected to the network by using the network adapter on
the host system. The virtual machine has a unique identity on the network,
separate from and unrelated to the host system.
NAT
The virtual machine and the host system share a single network identity that is
not visible on the external network. When the virtual machine sends a request to
access a network resource, it appears to the network resource as if the request is
coming from the host system.
Host-only
The virtual machine and the host virtual network adapter are connected to a
private Ethernet network. The network is completely contained within the host
system.
5
(Optional) Select the Connect at power on checkbox.
6
Click Finish to add the virtual network adapter to the virtual machine.
7
Click OK to save your changes.
8
Verify that the guest operating system is configured to use an appropriate IP address on the new
network.
a
If the virtual machine is using DHCP, release and renew the lease.
b
If the IP address is set statically, verify that the guest operating system has an address on the
correct virtual network.
Modify an Existing Virtual Network Adapter for a Virtual Machine
You can change the settings of a virtual network adapter that is currently used by a virtual machine.
Prerequisites
Familiarize yourself with the network configuration types. See Understanding Common Networking
Configurations.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select the virtual network adapter.
3
Select the virtual network adapter type.
Option
Description
Bridged
The virtual machine is connected to the network by using the network adapter on
the host system. The virtual machine has a unique identity on the network,
separate from and unrelated to the host system.
NAT
The virtual machine and the host system share a single network identity that is
not visible on the external network. When the virtual machine sends a request to
access a network resource, it appears to the network resource as if the request is
coming from the host system.
VMware, Inc.
123
Using VMware Workstation Player for Windows
Option
Description
Host-only
The virtual machine and the host virtual network adapter are connected to a
private Ethernet network. The network is completely contained within the host
system.
Custom
Select a custom network from the drop-down menu. Although VMnet0, VMnet1,
and VMnet8 might be available in this list, these networks are usually used for
bridged, host-only, and NAT networks.
LAN segment
Select a LAN segment from the drop-down menu. A LAN segment is a private
network that is shared by other virtual machines.
4
Click OK to save your changes.
5
Verify that the guest operating system is configured to use an appropriate IP address on the new
network.
a
If the virtual machine is using DHCP, release and renew the lease.
b
If the IP address is set statically, verify that the guest operating system has an address on the
correct virtual network.
VMware, Inc.
124
Configuring Virtual Machine
Option Settings
13
Virtual machine options settings control characteristics of individual virtual machines, such as how files
are transferred between the host and guest operating system and what happens to a guest operating
system when you exit Workstation Player. Some virtual machine options override similar
Workstation Player preference settings.
To configure virtual machine option settings for a selected virtual machine, select Player > Manage >
Virtual Machine Settings and click the Options tab.
This chapter includes the following topics:
n
Configuring General Option Settings for a Virtual Machine
n
Configuring Power Options for a Virtual Machine
n
Configuring VMware Tools Options for a Virtual Machine
n
Configuring Unity Mode for a Virtual Machine
n
Configuring Autologin for a Virtual Machine
Configuring General Option Settings for a Virtual Machine
General option settings include the virtual machine name, the guest operating system type and version,
and the location of the directory where virtual machine files are stored.
To configure general option settings for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Options tab, and select General.
n
Changing a Virtual Machine Name
You can change the name of a virtual machine. Changing the name of the virtual machine does not
change the name of this directory, nor does it rename the virtual machine files on the host.
Workstation Player uses the original name of the virtual machine to create the directory where virtual
machine files are stored.
n
Changing the Guest Operating System
You can change the guest operating system or operating system version for a virtual machine. You
might want to change the guest operating system for a virtual machine when you upgrade the guest
operating system or if you specified the wrong operating system version when you created the
virtual machine.
VMware, Inc.
125
Using VMware Workstation Player for Windows
n
Changing the Virtual Machine Working Directory
You can change the working directory for a virtual machine. The working directory is where
Workstation Player stores suspended state (.vmss), snapshot (.vmsn), and virtual machine paging
(.vmem) files. By default, the working directory is where the virtual machine files are stored.
n
Use the Enhanced Virtual Keyboard Feature in a Virtual Machine
The enhanced virtual keyboard feature provides better handling of international keyboards and
keyboards that have extra keys. This feature is available only on Windows host systems.
Changing a Virtual Machine Name
You can change the name of a virtual machine. Changing the name of the virtual machine does not
change the name of this directory, nor does it rename the virtual machine files on the host.
Workstation Player uses the original name of the virtual machine to create the directory where virtual
machine files are stored.
To specify a new name for a selected virtual machine, select Player > Manage > Virtual Machine
Settings, click the Options tab, and select General.
Changing the Guest Operating System
You can change the guest operating system or operating system version for a virtual machine. You might
want to change the guest operating system for a virtual machine when you upgrade the guest operating
system or if you specified the wrong operating system version when you created the virtual machine.
To select a new guest operating system or operating system version for a selected virtual machine, select
Player > Manage > Virtual Machine Settings, click the Options tab, and select General.
When you change the operating system type, the virtual machine configuration file is changed but the
guest operating system is not changed. To change the guest operating system, you must obtain the
operating system software and upgrade the guest operating system.
The virtual machine must be powered off when you change these settings.
Changing the Virtual Machine Working Directory
You can change the working directory for a virtual machine. The working directory is where
Workstation Player stores suspended state (.vmss), snapshot (.vmsn), and virtual machine paging
(.vmem) files. By default, the working directory is where the virtual machine files are stored.
To specify a new working directory for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Options tab, and select General.
You might want to change the working directory in the following situations.
n
To run a virtual machine that is stored on a network share or iPod, which might slow performance,
you can change the working directory to your local hard disk.
VMware, Inc.
126
Using VMware Workstation Player for Windows
n
To create a paging file on a fast disk with a lot of disk space but leave the virtual disk and
configuration file on a different disk, you can change the working directory so that it is located on the
fast disk.
Changing the working directory does not change the directory where Workstation Player stores the virtual
machine configuration (.vmx) file and log files.
The virtual machine must be powered off when you change this setting.
Use the Enhanced Virtual Keyboard Feature in a Virtual Machine
The enhanced virtual keyboard feature provides better handling of international keyboards and keyboards
that have extra keys. This feature is available only on Windows host systems.
Because it processes raw keyboard input as soon as possible, the enhanced virtual keyboard feature also
offers security improvements by bypassing Windows keystroke processing and any malware that is not
already at a lower layer. When you use the enhanced virtual keyboard feature, only the guest operating
system acts when you press Ctrl+Alt+Delete.
Prerequisites
n
If you recently installed or upgraded Workstation Player, but did not restart the host system, restart
the host system.
n
Power off the virtual machine.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Options tab, select General.
3
Select an option from the Enhanced virtual keyboard drop-down menu.
4
Option
Description
Off
The virtual machine does not use the enhanced virtual keyboard feature. This is
the default value.
Use if available (recommended)
The virtual machine uses the enhanced virtual keyboard feature, but only if the
enhanced virtual keyboard driver is installed on the host system.
Required
The virtual machine must use the enhanced the virtual keyboard feature. If you
select this option and the enhanced keyboard driver is not installed on the host
system, Workstation Player returns an error message.
Click OK to save your changes.
Configuring Power Options for a Virtual Machine
Power options control how a virtual machine behaves after it is powered off, closed, or suspended.
To configure power options for a selected virtual machine, select Player > Manage > Virtual Machine
Settings, click the Options tab, and select Power.
VMware, Inc.
127
Using VMware Workstation Player for Windows
Table 13‑1. Power Options
Option
Description
Enter full screen mode after powering on
The virtual machine window enters full screen mode after it is powered on.
Report battery information to guest
Battery information is reported to the guest operating system. If you run the virtual
machine on a laptop in full screen mode, this option enables you to determine
when the battery is running low. This option is available only for Workstation 6.x
and later virtual machines.
Configuring VMware Tools Options for a Virtual Machine
You can configure how VMware Tools is updated on a virtual machine. You can also configure whether
the clock on the guest operating system is synchronized with the clock on the host.
VMware Tools Update Options
The virtual machine VMware Tools update options override the Workstation Player preferences for
automatically updating VMware Tools on Linux and Windows guest operating systems.
To configure VMware Tools updates for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Options tab, and select VMware Tools.
Note Automatic updates are not supported for versions of VMware Tools included in virtual machines
created with older versions of VMware products, such as Workstation 5.5 and earlier or VMware Server
1.x.
Table 13‑2. VMware Tools Update Options
Option
Description
Update manually (do nothing)
You must update VMware Tools manually. A message appears on the
status bar of the guest operating system when a new version of
VMware Tools is available.
Update automatically
VMware Tools is updated automatically when a new version is
available. The status bar indicates when an update is in progress.
Use application default (currently update automatically)
Use the default VMware Tools update behavior.
To install a VMware Tools update, use the same procedure that you used for installing VMware Tools the
first time.
Time Synchronization
If you turn on the VMware Tools time synchronization feature, VMware Tools checks once every minute to
determine whether the clocks on the guest and host operating systems still match. If not, the clock on the
guest operating system is synchronized to match the clock on the host.
Native time synchronization software, such as Network Time Protocol (NTP) for Linux and the Mac OS X,
or Microsoft Windows Time Service (Win32Time) for Windows, is typically more accurate than VMware
Tools periodic time synchronization and is therefore preferred.
VMware, Inc.
128
Using VMware Workstation Player for Windows
Configuring Unity Mode for a Virtual Machine
In virtual machines that have Windows XP or later guest operating systems, you can switch to Unity mode
to display applications directly on the host system desktop. Open applications in Unity mode appear on
the taskbar in the same way as open host system applications.
To configure Unity mode settings for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Options tab, and select Unity.
Table 13‑3. Unity Mode Options
Setting
Description
Show borders
Set a window border that identifies the application as belonging to the virtual
machine rather than to the host computer.
Show badges
Display a logo in the title bar.
Use a custom color in window borders
Use a custom color in window borders to help distinguish between the
application windows that belong to various virtual machines. For example, you
can set the applications for one virtual machine to have a blue border and set
the applications for another virtual machine to have a yellow border. On
Windows hosts, click Choose color to use the color chooser.
Enable applications menu
The virtual machine Start or Applications menu appears on the host system
desktop.
When you can access the virtual machine Start or Applications menu from
the host machine desktop, you can start applications in the virtual machine that
are not open in Unity mode. If you do not enable this setting, you must exit
Unity mode to display the virtual machine Start or Applications menu in the
console view.
Configuring Autologin for a Virtual Machine
You can configure the Autologin feature for virtual machines that have a Windows 2000 or later guest
operating system. To use Autologin, the virtual machine must be powered on, you must have an existing
user account on the local machine, and the latest version of VMware Tools must be installed.
To configure Autologin for a selected virtual machine, select Player > Manage > Virtual Machine
Settings, click the Options tab, and select Autologin.
When you enable Autologin, you must type your login credentials. If you type an incorrect or expired
password, you must type your login credentials when you power on the virtual machine. To change your
login credentials, select Change User.
Note When you enable Autologin or change your login credentials, Autologin settings are saved
immediately. If you click Cancel in the Virtual Machine Settings dialog box, the changes applied to the
Autologin settings are not affected.
VMware, Inc.
129
Configuring Virtual Machine
Hardware Settings
14
You can use virtual machine hardware settings to add, remove, and modify virtual devices for a virtual
machine.
To configure hardware settings for a selected virtual machine, select Player > Manage > Virtual Machine
Settings and click the Hardware tab. When you select a device in the left pane, the configuration options
for that device appear in the right pane.
This chapter includes the following topics:
n
Adding Hardware to a Virtual Machine
n
Removing Hardware from a Virtual Machine
n
Adjusting Virtual Machine Memory
n
Configuring Virtual Machine Processor Settings
n
Configuring and Maintaining Virtual Hard Disks
n
Configuring CD-ROM and DVD Drive Settings
n
Configuring Floppy Drive Settings
n
Configuring Virtual Network Adapter Settings
n
Configuring USB Controller Settings
n
Configuring Sound Card Settings
n
Configuring Parallel Port Settings
n
Configuring Serial Port Settings
n
Configuring Generic SCSI Device Settings
n
Configuring Printer Settings
n
Configuring Display Settings
n
Installing a Guest Operating System on a Physical Disk or Unused Partition
Adding Hardware to a Virtual Machine
You can use virtual machine hardware settings to add hardware to an existing virtual machine.
VMware, Inc.
130
Using VMware Workstation Player for Windows
To add hardware to a selected virtual machine, select Player > Manage > Virtual Machine Settings,
click the Hardware tab, and click Add.
Note You cannot add hardware to a virtual machine while it is in a suspended state.
The Add Hardware wizard prompts you to select the type of device that you want to add and to specify
device-specific configuration settings. You can modify many of the configuration settings after the device
is created by changing virtual machine hardware settings.
You can add the following types of devices to a virtual machine.
Virtual hard disks
A virtual hard disk is a set of files that appears as a physical disk drive to
the guest operating system. You can configure a virtual hard disk as an
IDE, SCSI, SATA, or NVMe device. You can add up to 4 IDE devices, up to
60 SCSI devices, up to 120 SATA devices (4 controllers and 30 devices per
controller), and up to 60 NVMe devices (4 controllers and 15 devices per
controller) to a virtual machine. You can also give a virtual machine direct
access to a physical disk.
CD-ROM and DVD
drives
You can configure a virtual CD-ROM or DVD drive as an IDE, SCSI, or
SATA device. You can add up to 4 IDE devices, up to 60 SCSI devices, and
up to 120 SATA devices (4 controllers and 30 devices per controller). You
can connect virtual CD-ROM and DVD drives to a physical drive on the
host system or to an ISO image file.
Floppy drives
You can add up to two floppy drives. A virtual floppy drive can connect to a
physical drive on the host system, to an existing floppy image file, or to a
blank floppy image file.
Network adapters
You can add up to 10 virtual network adapters to a virtual machine.
USB controller
You can add one USB controller to a virtual machine. A virtual machine
must have a USB controller to use USB devices or smart card readers. For
smart card readers, a virtual machine must have a USB controller
regardless of whether the smart card reader is actually a USB device.
Sound card
If the host system is configured for sound and has a sound card installed,
you can enable sound for virtual machines.
Parallel (LPT) ports
You can attach up to three bidirectional parallel ports to a virtual machine.
Virtual parallel ports can output to parallel ports or to files on the host
operating system.
Serial (COM) ports
You can add up to four serials ports to a virtual machine. Virtual serial ports
can output to physical serial ports, files on the host operating system, or
named pipes.
VMware, Inc.
131
Using VMware Workstation Player for Windows
Printers
You can print from a virtual machine to any printer available to the host
system without installing additional drivers in the virtual machine.
Workstation Player uses ThinPrint technology to replicate the host machine
printer mapping in the virtual machine. When you enable the virtual
machine printer, Workstation Player configures a virtual serial port to
communicate with the host printers.
Generic SCSI devices
You can add up to 60 SCSI devices to a virtual machine. A generic SCSI
device gives the guest operating system direct access to a SCSI device
connected to the host system. Generic SCSI devices can include scanners,
tape drives, CD-ROM drives, and DVD drives.
Removing Hardware from a Virtual Machine
You can remove certain types of hardware from a virtual machine.
To remove hardware from a selected virtual machine, select Player > Manage > Virtual Machine
Settings, click the Hardware tab, and click Remove.
Note You cannot remove hardware from a virtual machine while it is in suspended state.
You can remove the following types of devices from a virtual machine.
n
Virtual hard disks
n
CD-ROM and DVD drives
n
Floppy drives
n
Virtual network adapters
n
USB controllers
n
Sound cards
n
Printers
n
Generic SCSI devices
You cannot remove the Memory, Processors, and Display device types.
You must power off a virtual machine before you remove a virtual network adapter, sound card, parallel
port, serial port, or generic SCSI device. You must also power off Workstation 5 virtual machines before
you remove a USB controller.
Adjusting Virtual Machine Memory
You can adjust the amount of memory that is allocated to a virtual machine. You must power off a virtual
machine before you change its memory allocation setting.
To adjust the memory allocation for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, and click Memory.
VMware, Inc.
132
Using VMware Workstation Player for Windows
The Memory panel includes information to help you select the appropriate amount of memory for the
virtual machine. The high end of the range is determined by the amount of memory that is allocated to all
running virtual machines. If you allow virtual machine memory to be swapped, this value changes to
reflect the specified amount of swapping.
The color-coded icons on the Memory panel indicate the maximum recommended memory, the
recommended memory, and the guest operating system recommended minimum memory amounts. To
adjust the memory, move the slider along the range of values, or type a value in the Memory for this
virtual machine text box.
Note Allocating more than the maximum memory to a virtual machine might cause memory swapping. It
can also negatively affect host system performance, including the ability to run Workstation Player.
Configuring Virtual Machine Processor Settings
You can configure processor settings for a virtual machine, including the number of processors, the
number of cores per processor, and the preferred execution mode for the virtualization engine.
To configure processor settings for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, and select Processors.
Table 14‑1. Processor Settings
Setting
Description
Number of cores per processor
Select the number of cores per processor.
Workstation Player supports up to 16-way virtual Symmetric Multiprocessing
(SMP) for guest operating systems running on multiprocessor host machines.
You can assign processors and cores per processor to a virtual machine on any
host machine that has at least two logical processors.
Virtualize Intel VT-x/EPT or AMD-V/RVI
Workstation Player forces the virtual machine execution mode to VT-x/EPT or
AMD-RVI. Physical Address Extension (PAE) mode must be enabled to use
virtualized AMD-V/RVI.
If the execution mode is not supported by the host system, virtualized VT-x/EPT
or AMD/RVI is not available. If you migrate the virtual machine to another
VMware product, virtualized VT-x/EPT or AMD-V/RVI might not be available.
Virtualize CPU performance counters
Turn on this feature if you plan to use performance monitoring applications such
as VTune or OProfile to optimize or debug software that runs inside the virtual
machine.
This feature is available only if the virtual machine compatibility is Workstation 9
or later.
Configuring and Maintaining Virtual Hard Disks
You can configure virtual hard disk node and mode settings. You can also use command in the Utilities
menu to perform common disk maintenance tasks, such as defragmenting, compacting, and expanding a
disk.
To perform actions on a virtual hard disk for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, and select the virtual hard disk.
VMware, Inc.
133
Using VMware Workstation Player for Windows
n
Defragmenting Virtual Hard Disks
Like physical disk drives, virtual hard disks can become fragmented. Defragmenting disks
rearranges files, programs, and unused space on the virtual disk so that programs run faster and
files open more quickly. Defragmenting does not reclaim unused space on a virtual disk.
n
Expanding Virtual Hard Disks
Expanding a virtual hard disk adds storage space to the virtual machine.
n
Compacting Virtual Hard Disks
Compacting a virtual hard disk can reclaim unused space in the virtual disk. Modern disks and
operating systems are much more efficient at managing disk space than in the recent past.
Therefore, do not expect the compacting procedure to return large amounts of disk space to the host
drive.
n
Mapping a Virtual Disk to the Host System
Instead of using shared folders or copying data between a virtual machine and the host system, you
can map a virtual disk to the host system. In this case, you map a virtual disk in the host file system
as a separate mapped drive. Using a mapped drive lets you connect to the virtual disk without going
into a virtual machine.
n
Changing Virtual Hard Disk Node and Mode Settings
You can change virtual hard disk node and mode settings.
Defragmenting Virtual Hard Disks
Like physical disk drives, virtual hard disks can become fragmented. Defragmenting disks rearranges
files, programs, and unused space on the virtual disk so that programs run faster and files open more
quickly. Defragmenting does not reclaim unused space on a virtual disk.
There must be adequate free working space on the host system to defragment a virtual hard disk. If the
disk is contained in a single file, for example, you need free space equal to the size of the disk file. Other
virtual hard disk configurations require less free space. You cannot defragment a virtual hard disk while it
is mapped or mounted.
To defragment a virtual hard disk for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, select the virtual hard disk, and select Defragment from the
Utilities menu.
Note Defragmenting a virtual hard disk can take several minutes.
Expanding Virtual Hard Disks
Expanding a virtual hard disk adds storage space to the virtual machine.
When you expand a virtual hard disk, the added space is not immediately available to the virtual machine.
To make the added space available, you must use a disk management tool to increase the size of the
existing partition on the virtual hard disk to match the expanded size.
VMware, Inc.
134
Using VMware Workstation Player for Windows
The disk management tool that you use depends on the virtual machine guest operating system. Many
operating systems, including Windows Vista, Windows 7, and some versions of Linux, provide built-in disk
management tools that can resize partitions. Third-party disk management tools are also available, such
as Symantec/Norton PartitionMagic, EASEUS Partition Master, Acronis Disk Director, and the opensource tool GParted.
When you expand the size of a virtual hard disk, the sizes of partitions and file systems are not affected.
To expand a virtual hard disk for a selected virtual machine, select Player > Manage > Virtual Machine
Settings, select the virtual hard disk, and select Expand from the Utilities menu.
Note As an alternative to expanding a virtual hard disk, you can add a new virtual hard disk to the virtual
machine.
Compacting Virtual Hard Disks
Compacting a virtual hard disk can reclaim unused space in the virtual disk. Modern disks and operating
systems are much more efficient at managing disk space than in the recent past. Therefore, do not expect
the compacting procedure to return large amounts of disk space to the host drive.
You cannot compact a virtual hard disk if disk space is preallocated or if the virtual hard disk is mapped or
mounted.
To compact a virtual hard disk for a selected virtual machine, select Player > Manage > Virtual Machine
Settings, click the Hardware tab, select the virtual hard disk, and select Compact from the Utilities
menu.
Mapping a Virtual Disk to the Host System
Instead of using shared folders or copying data between a virtual machine and the host system, you can
map a virtual disk to the host system. In this case, you map a virtual disk in the host file system as a
separate mapped drive. Using a mapped drive lets you connect to the virtual disk without going into a
virtual machine.
Map or Mount a Virtual Disk to a Drive on the Host System
When you map a virtual disk and its associated volume to a drive on the host system, you can connect to
the virtual disk without opening a virtual machine.
After you map the virtual disk to a drive on the host system, you cannot power on any virtual machine that
uses the disk until you disconnect the disk from the host system.
Important If you mount a virtual disk that has a snapshot and then write to the disk, you can irreparably
damage a snapshot or linked clone created from the virtual machine. Note that Workstation Player does
not support taking snapshots or deleting them.
Mapping a virtual disk to a host system is not supported in the standalone version of Workstation Player.
Virtual disk mapping is supported in the Workstation Player version included with Workstation Pro.
VMware, Inc.
135
Using VMware Workstation Player for Windows
Prerequisites
n
Power off all virtual machines that use the virtual disk.
n
Verify that the virtual disk (.vmdk) files on the virtual disk are not compressed and do not have readonly permissions.
n
On a Windows host, verify that the volume is formatted with FAT (12/16/32) or NTFS. Only FAT
(12/16/32) and NTFS formatting is supported. If the virtual disk has mixed partitions, for example, one
partition is formatted with a Linux operating system and another partition is formatted with a Windows
operating system, you can map the Windows partition only.
n
Verify that the virtual disk is unencrypted. You cannot map or mount encrypted disks.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Hard Disk, click Utilities, and select Map.
3
On a Windows host, leave the check box Open file in read-only mode selected in the Map Virtual
Disk dialog box.
This setting prevents you from accidentally writing data to a virtual disk that might be the parent of a
snapshot or linked clone. Writing to such a disk might make the snapshot or linked clone unusable.
4
Browse to a virtual disk (.vmdk) file, select it, and click Open.
5
Select the volume to map or mount and select an unused drive letter on the host system.
6
(Optional) On a Windows host, if you do not want the drive to open in Windows Explorer after it is
mapped, deselect the Open drive in Windows Explorer after mapping check box.
7
Click OK or Mount.
The drive appears on the host system. You can read from or write to files on the mapped virtual disk
on the host system.
Disconnect a Virtual Disk from the Host System
To use a virtual disk from a virtual machine after it has been mapped or mounted on the host system, you
must disconnect it from the host system.
On Windows hosts, you must use Workstation Player to disconnect the drive from the host system. The
mapped drive letter does not appear in the list of network drives when you use the Windows Disconnect
Network Drive command.
Procedure
1
Select the virtual machine and select Player > Manage > Virtual Machine Settings.
2
On the Hardware tab, select Hard Disk, click Utilities, and select Disconnect.
You can now power on any virtual machine that uses this disk.
VMware, Inc.
136
Using VMware Workstation Player for Windows
Changing Virtual Hard Disk Node and Mode Settings
You can change virtual hard disk node and mode settings.
To change the node and mode settings for a virtual hard disk on a selected virtual machine, select Player
> Manage > Virtual Machine Settings, click the Hardware tab, select the virtual hard disk, and click
Advanced. By default, changes are immediately written to the disk.
Table 14‑2. Virtual Hard Disk Node and Mode Settings
Setting
Description
Virtual device node
Select the SCSI, IDE, SATA, or NVMe device identifier to use for the drive. For example, if
you select SCSI 0:2, the guest operating system detects the drive as ID 2 on controller 0. You
determine whether the virtual disk is seen as a SCSI, IDE, SATA, or NVMe device at the time
that you create it.
Configuring CD-ROM and DVD Drive Settings
You can configure CD-ROM and DVD drive settings, including the virtual device node and legacy
emulation modes.
To configure CD-ROM and DVD drive settings for a selected virtual machine, select Player > Manage >
Virtual Machine Settings, click the Hardware tab, and select the drive.
n
Configuring CD-ROM and DVD Drive Status and Connection Settings
Device status and connection settings control when a CD-ROM or DVD drive is connected to a
virtual machine, whether to use a specific drive or allow Workstation Player to detect a drive, and
whether to use an ISO image file instead of a physical drive.
n
Changing Virtual Device Node and Legacy Emulation Settings
You can use the advanced settings to change the virtual device node and legacy emulation settings
for a CD-ROM or DVD drive. You must power off the virtual machine before you change these
settings.
Configuring CD-ROM and DVD Drive Status and Connection
Settings
Device status and connection settings control when a CD-ROM or DVD drive is connected to a virtual
machine, whether to use a specific drive or allow Workstation Player to detect a drive, and whether to use
an ISO image file instead of a physical drive.
To configure device status and connection settings for a selected virtual machine, select Player >
Manage > Virtual Machine Settings, click the Hardware tab, and select the drive.
Table 14‑3. Device Status and Connection Settings
Setting
Description
Connected
Connect the drive or ISO image file while the virtual machine is running.
Connect at power on
Connect the drive or ISO image path when you power on the virtual machine.
VMware, Inc.
137
Using VMware Workstation Player for Windows
Table 14‑3. Device Status and Connection Settings (Continued)
Setting
Description
Use physical drive
Select a specific drive or select Auto detect to allow Workstation Player to detect a
drive to use.
Use ISO image file
Specify or select an ISO image file for the virtual machine to use.
To disable or enable access to a CD-ROM or DVD drive while a virtual machine is running, select the
virtual machine, select Player > Removable Devices > CD/DVD, and select Disconnect or Connect.
Changing Virtual Device Node and Legacy Emulation Settings
You can use the advanced settings to change the virtual device node and legacy emulation settings for a
CD-ROM or DVD drive. You must power off the virtual machine before you change these settings.
To configure virtual device and legacy emulation settings for a selected virtual machine, select Player >
Manage > Virtual Machine Settings, click the Hardware tab, select the drive, and click Advanced.
Use the settings to select which SCSI, IDE, SATA, or NVMe device identifier to use for the drive. For
example, if you select SCSI 0:2, the guest operating system detects the drive as ID 2 on controller 0. You
can select the IDE, SCSI, SATA, or NVMe node options regardless of the physical device type. For
example, if the physical drive is an IDE device, you can select a SCSI node. In this case, the virtual
machine detects the drive as a SCSI device.
If you select the Legacy emulation setting, the virtual hardware works as it did in an earlier release of
Workstation Player. By default, Workstation Player attempts to make the advanced features of your drive
available, but sometimes this setting might cause the drive to not work with the virtual machine. Selecting
the Legacy emulation setting reverts Workstation Player to the previous emulation mode for the drive.
Legacy emulation is helpful for troubleshooting purposes.
Configuring Floppy Drive Settings
You can configure when a floppy drive is connected to a virtual machine, whether to use a specific drive
or allow Workstation Player to detect a drive, and whether to use an disk drive image file instead of a
physical drive.
To configure floppy drive settings for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, and select the floppy drive.
Table 14‑4. Floppy Drive Settings
Setting
Description
Connected
Connect the drive or floppy image file while the virtual machine is running.
Connect at power on
Connect the floppy drive when you power on the virtual machine.
VMware, Inc.
138
Using VMware Workstation Player for Windows
Table 14‑4. Floppy Drive Settings (Continued)
Setting
Description
Use a physical drive
Select a specific floppy drive or select Auto detect to allow Workstation Player to detect
a drive to use.
Use a floppy image file
Create or browse to a floppy image (.img or .flp) file. Select Read only to prevent
changes from being made to the file.
To disable or enable access to a floppy drive while a virtual machine is running, select the virtual
machine, select Player > Removable Devices > Floppy, and select Disconnect or Connect.
Configuring Virtual Network Adapter Settings
You can configure when a virtual network adapter is connected to a virtual machine and the type of
network connection that the adapter provides.
To configure virtual network adapter settings for a selected virtual machine, select Player > Manage >
Virtual Machine Settings, click the Hardware tab, and select the virtual network adapter.
n
Configuring Virtual Network Adapter Device Status Settings
Device status settings control when a virtual network adapter is connected to a virtual machine.
n
Configuring Bridged Networking
When you configure bridged networking, the virtual machine uses physical network adapters on the
host system to connect a network.
n
Configuring Network Address Translation
When you configure Network Address Translation (NAT), the virtual machine shares the IP address
and MAC address of the host system.
n
Configuring Host-Only Networking
When you configure host-only networking, Workstation Player creates a virtual private network
(VPN) connection between the virtual machine and the host system.
n
Configuring LAN Segments
When you select a LAN segment, the virtual machine uses a private network that can be shared with
other virtual machines. LAN segments are useful for multitier testing, network performance analysis,
and situations where virtual machine isolation are important.
n
Configuring Virtual Network Adapter Advanced Settings
You can use the advanced virtual network adapter settings to limit the bandwidth, specify the
acceptable packet loss percentage, and create network latency for incoming and outgoing data
transfers for a virtual machine.
Configuring Virtual Network Adapter Device Status Settings
Device status settings control when a virtual network adapter is connected to a virtual machine.
To configure virtual network adapter device status settings for a selected virtual machine, select Player >
Manage > Virtual Machine Settings, click the Hardware tab, and select the virtual network adapter.
VMware, Inc.
139
Using VMware Workstation Player for Windows
Table 14‑5. Device Status Settings
Setting
Description
Connected
Connect the virtual network adapter while the virtual machine is running.
Connect at power on
Connect the virtual network adapter when you power on the virtual machine.
Configuring Bridged Networking
When you configure bridged networking, the virtual machine uses physical network adapters on the host
system to connect a network.
If the host system is on a network, bridged networking is often the easiest way to give a virtual machine
access to that network.
With bridged networking, the virtual machine appears as an additional computer on the same physical
Ethernet network as the host system. The virtual machine can transparently use the services available on
the network, including file servers, printers, and gateways. Physical hosts and other virtual machines
configured with bridged networking can also use the resources of the virtual machine.
When you use bridged networking, the virtual machine must have its own identity on the network. For
example, on a TCP/IP network, the virtual machine must have its own IP address. Virtual machines
typically acquire an IP address and other network details from a DHCP server. In some configurations,
you might need to set the IP address and other details manually.
Users who boot multiple operating systems often assign the same address to all systems because they
assume that only one operating system will be running at the same time. If the host system is set up to
boot multiple operating systems and you run one or more of them in virtual machines, configure each
operating system with a unique network address.
When the Replicate physical connection state option is selected, the IP address is automatically
renewed when you move from one wired or wireless network to another. This setting is useful for virtual
machines than run on laptops or other mobile devices.
Changing Automatic Bridging Settings
When automatic bridging mode is configured, you can restrict the physical network adapters that a virtual
switch bridges to.
To change automatic bridging settings, select Player > Virtual Machine Settings > Network Adapter >
Configure Adapters, select the host network adapter(s) to automatically bridge, and click OK.
By default, a virtual switch bridges to all active network adapters on the host system when it is configured
for automatic bridging. The choice of which adapter to use is arbitrary.
To prevent a virtual switch from bridging to a particular physical network adapter, deselect the check box
for that host network adapter.
VMware, Inc.
140
Using VMware Workstation Player for Windows
Configuring Network Address Translation
When you configure Network Address Translation (NAT), the virtual machine shares the IP address and
MAC address of the host system.
The virtual machine and the host system share the a single identity that is not visible outside the network.
The virtual machine does not have its own IP address. Instead, a separate private network is set up on
the host system and the virtual machine obtains an address on that network from the VMware virtual
DHCP server. The VMware NAT device passes network data between one or more virtual machines and
the external network. The VMware NAT device identifies incoming data packets that are intended for each
virtual machine and sends them to the correct destination.
With NAT, a virtual machine can use many standard protocols to connect to other machines on the
external network. For example, you can use HTTP to browse Web sites, FTP to transfer files, and Telnet
to log in to other systems. You can also connect to a TCP/IP network by using a Token Ring adapter on
the host system.
In the default configuration, systems on the external network cannot initiate connections to the virtual
machine. For example, the default configuration does not let you use the virtual machine as a Web server
to send Web pages to systems on the external network. This limitation protects the guest operating
system from being compromised before you can install security software.
By default, NAT is used when you use the New Virtual Machine wizard to create a virtual machine.
The virtual machine uses NAT to connect to the Internet or other TCP/IP network by using the networking
connection on the host system. NAT works with Ethernet, DSL, and phone modems. A separate private
network is set up on the host system. The virtual machine obtains an address on that network from the
VMware virtual DHCP server.
Configuring Host-Only Networking
When you configure host-only networking, Workstation Player creates a virtual private network (VPN)
connection between the virtual machine and the host system.
A VPN is typically not visible outside the host system. Multiple virtual machines configured with host-only
networking on the same host system are on the same network. The VMware DHCP server provides
addresses on the network.
If you install the proper routing or proxy software on the host system, you can establish a connection
between the host virtual network adapter and a physical network adapter on the host system. With this
configuration, you can connect the virtual machine to a Token Ring or other non-Ethernet network.
On Windows host systems, you can use host-only networking in combination with the Internet Connection
Sharing feature in Windows. With this combination, the virtual machine can use the dial-up networking
adapter on the host system or another connection to the Internet. See the Windows documentation for
more information on Internet Connection Sharing.
VMware, Inc.
141
Using VMware Workstation Player for Windows
Configuring LAN Segments
When you select a LAN segment, the virtual machine uses a private network that can be shared with
other virtual machines. LAN segments are useful for multitier testing, network performance analysis, and
situations where virtual machine isolation are important.
If you add an existing virtual machine to a LAN segment, the virtual machine might be configured to
expect an IP address from a DHCP server. Unlike host-only and NAT networking, Workstation Player
does not provide a DHCP server for LAN segments. You must manually configure IP addressing for
virtual machines on a LAN segment. You can either configure a DHCP server on the LAN segment to
allocate IP addresses, or you can configure a fixed IP address for each virtual machine on the LAN
segment.
You can click LAN Segments to create new LAN segments or delete and rename existing LAN
segments. Deleting a LAN segment disconnects all virtual network adapters that are configured for that
LAN segment. When you delete a LAN segment, you must manually configure its disconnected virtual
network adapter to reconnect the virtual machine to the network.
Configuring Virtual Network Adapter Advanced Settings
You can use the advanced virtual network adapter settings to limit the bandwidth, specify the acceptable
packet loss percentage, and create network latency for incoming and outgoing data transfers for a virtual
machine.
The advanced virtual network adapter settings allow you to simulate a network environment that differs
from your own.
To configure advanced virtual network adapter settings for a selected virtual machine, select Player >
Manage > Virtual Machine Settings, click the Hardware tab, select the virtual network adapter, and click
Advanced.
Table 14‑6. Virtual Network Adapter Advanced Settings
Setting
Description
Bandwidth and Kbps
To limit incoming or outgoing data transfers to the data transfer rate for a specific
network connection type, select the network connection type from the Bandwidth dropdown menu. The value in the Kbps text box changes to the data transfer rate, in
kilobits per second, of the network connection type that you select. For example, if you
select Leased Line T1 (1.544 Mbps), the value in the Kbps text box changes to 1544.
To limit incoming or outgoing data transfers to a specific data transfer rate, select
Custom and type the data transfer rate in kilobits per second in the Kbps text box.
The default bandwidth setting for both incoming and outgoing data transfers is
Unlimited.
Packet Loss (%)
VMware, Inc.
The acceptable packet loss percentage for incoming or outgoing data transfers. The
default setting is 0.0%.
142
Using VMware Workstation Player for Windows
Table 14‑6. Virtual Network Adapter Advanced Settings (Continued)
Setting
Description
Latency (ms)
To simulate network latency for incoming and outgoing data transfers, set the number
of milliseconds (ms) of latency. The latency range is 0 to 2,000 ms.
Note Expect actual network latency to be up to 10 ms above the number you set. For
example, if you set latency at 200 ms, expect the actual latency to be between 200 to
210 ms.
MAC Address
To assign a new MAC address to the network adapter, either type a new address in this
text box or click Generate to have Workstation Player generate a new address.
Configuring USB Controller Settings
You can configure whether a USB controller supports isochronous USB and Bluetooth devices, when to
connect new USB devices to the host system, and whether human interface devices (HIDs) appear in the
Removable Devices menu.
To configure USB controller settings for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, and click USB Controller.
Table 14‑7. USB Controller Settings
Setting
Description
USB Compatibility
Selecting USB 2.0 or 3.0 enables support for isochronous USB devices,
including Web cams, speakers, and microphones.
Automatically connect new USB devices
Connect new USB devices to the virtual machine. If this setting is not
selected, new USB devices are connected only to the host system.
Show all USB input devices
Human interface devices (HIDs), such as USB 1.1 and 2.0 mouse and
keyboard devices, appear in the Removable Devices menu. Icons for
HIDs appear in the status bar. An HID that is connected to the guest
operating system is not available to the host system. The virtual machine
must be powered off when you change this setting.
Share Bluetooth devices with the virtual machine
Enable support for Bluetooth devices.
To connect or disconnect USB devices while a virtual machine is running, select the virtual machine and
select Player > Removable Devices. With the two-port USB controller, you can connect to both USB 1.1
and USB 2.0 devices.
Important Before you unplug a USB device or select a removable device to disconnect a USB device
from a virtual machine, follow the device manufacturer's procedures for safely unplugging the device from
a physical computer.
Configuring Sound Card Settings
You can configure when a sound card is connected to a virtual machine. You can also configure whether
a virtual machine uses a specific sound card or the default sound card in the host system.
VMware, Inc.
143
Using VMware Workstation Player for Windows
To configure sound card settings for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, and click Sound Card.
Table 14‑8. Sound Card Settings
Setting
Description
Connected
Connect the sound device while the virtual machine is running.
Connect at power on
Connect the sound device when you power on the virtual machine.
Use default host sound card
Make the virtual machine use the default sound card in the host system.
Specify host sound card
(Windows hosts only) Select a specific host sound card for the virtual machine to use.
Use physical sound card
(Linux hosts only) Select a specific host sound card to for the virtual machine to use.
Enable Echo Cancellation
Enable echo cancellation for the sound card.
Configuring Parallel Port Settings
You can configure when a parallel port is connected to a virtual machine and whether to send output to a
physical port or to a file on the host system.
To configure parallel port settings for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, and select the parallel port.
Table 14‑9. Parallel Port Settings
Setting
Description
Connected
Connect the port while the virtual machine is running.
Connect at power on
Connect the port when you power on the virtual machine.
If the guest operating system cannot access the parallel port device when you
power on the virtual machine, deselect this setting. You can use the
Removable Devices menu to enable access to the parallel port after the
virtual machine is powered on.
Use a physical parallel port
Select a host parallel port for the virtual machine to use.
Use output file
Send output from the virtual parallel port to a file on the host system. Either
locate an existing output file or browse to a directory and type a filename to
create a new output file.
Configuring Serial Port Settings
You can configure when a serial port is connected to a virtual machine. You can also configure whether to
send output to a physical port or to a file on the host system, set up a direct connection between two
virtual machines, and specify whether the guest operating system uses the port in polled mode.
To configure serial port settings for a selected virtual machine, select Player > Manage > Virtual
Machine Settings, click the Hardware tab, and select the serial port.
VMware, Inc.
144
Using VMware Workstation Player for Windows
Table 14‑10. Serial Port Settings
Setting
Description
Connected
Connect the port while the virtual machine is running.
Connect at power on
Connect the port when you power on the virtual machine.
Use a physical serial port
Select a host serial port.
Use output file
Send output from the virtual serial port to a file on the host system. Either
locate an existing output file or navigate to the desired directory and type a
filename for the file to create.
Use named pipe or Use socket (named pipe)
Set up a direct connection between two virtual machines or a connection
between a virtual machine and an application on the host system.
(Windows hosts) Use the default pipe name, or enter another pipe name.
The pipe name must begin with \\.\pipe\ and must be the same on both
the server and the client. For example:
\\.\pipe\\ namedpipe
Yield CPU on poll
The guest operating system uses the port in polled mode rather than
interrupt mode. It yields processor time if its only task is to poll the virtual
serial port.
If the guest operating system uses the serial port in interrupt mode, do not
select this setting.
Note This setting is useful for developers who are using debugging tools
that communicate over a serial connection. Selecting this setting can
improve performance when the guest operating system uses the serial port
in polled mode.
Configuring Generic SCSI Device Settings
You can configure when a generic SCSI device is connected to a virtual machine, specify the physical
SCSI device to connect to on the host system, and select the SCSI identifier to use for the drive.
To configure generic SCSI device settings for a selected virtual machine, select Player > Manage >
Virtual Machine Settings, click the Hardware tab, and select the generic SCSI device.
Table 14‑11. Generic SCSI Device Settings
Setting
Description
Connected
Connect the device while the virtual machine is running.
Connect at power on
Connect the device when you power on the virtual machine.
VMware, Inc.
145
Using VMware Workstation Player for Windows
Table 14‑11. Generic SCSI Device Settings (Continued)
Setting
Description
Specify the physical SCSI device to connect to
Select a host SCSI device.
(Windows hosts) Select a device. The menu shows the SCSI devices
that are available on the host system.
(Linux hosts) Type the name of the /dev/sg entry for the device to
install in the virtual machine. For example, if the device is named
sga, type /dev/sga.
Virtual device node
Select the SCSI device identifier to use for the drive. For example, if
you select SCSI 0:2, the guest operating system sees the drive as ID
2 on controller 0.
The virtual machine must be powered off when you change this
setting.
Note For specific Windows guest operating systems, you might need to perform additional configuration
steps to use a generic SCSI device.
Configuring Printer Settings
You can configure when a printer is connected to a virtual machine.
To configure printer settings for a selected virtual machine, select Player > Manage > Virtual Machine
Settings, click the Hardware tab, and select Printer.
Table 14‑12. Printer Settings
Setting
Description
Connected
Connect the printer while the virtual machine is running.
Connect at power on
Connect the printer when you power on the virtual machine.
Configuring Display Settings
You can specify monitor resolution settings, configure multiple monitors, and select accelerated graphics
capabilities for a virtual machine.
To configure display settings for a virtual machine, select the virtual machine, select Player > Manage >
Virtual Machine Settings, click the Hardware tab, and select Display.
Table 14‑13. Display Settings
Setting
Description
Accelerate 3D graphics
Select this setting if you run applications that use DirectX 9 or DirectX 10
accelerated graphics. Accelerated graphics capabilities apply to Windows XP or
later guests on hosts running Windows or Linux.
The virtual machine must be a Player 3.x or later virtual machine and must have
the latest VMware Tools installed.
Use host setting for monitors
VMware, Inc.
146
Using VMware Workstation Player for Windows
Table 14‑13. Display Settings (Continued)
Setting
Description
Specify monitor settings
Set the number of monitors that the virtual machine will see, regardless of the
number of monitors on the host system. This setting is useful if you use a
multimonitor host system and you need to test in a virtual machine that has only
one monitor. It is also useful if you are developing a multimonitor application in a
virtual machine and the host system has only one monitor. After you power on
the virtual machine, the guest operating system sees the number of monitors
that you specified. Select a resolution from the list or type a setting that has the
format width x height, where width and height are the number of pixels.
Graphics memory
Select the maximum amount of guest memory that can be used for graphics
memory using the drop down menu. The default value of video memory varies
by guest OS.
Display Scaling
Enables display scaling for the virtual machine display. The user interface is
automatically adjusted when the display changes.
Installing a Guest Operating System on a Physical Disk or
Unused Partition
You can install a guest operating system directly on a physical disk or unused partition on the host
system.
A physical disk directly accesses an existing local disk or partition. You can use physical disks to run one
or more guest operating systems from existing disk partitions.
Workstation Player supports physical disks up to 2 TB capacity. Booting from an operating system already
set up on an existing SCSI disk or partition is not supported.
Running an operating system natively on the host system and switching to running it inside a virtual
machine is similar to pulling the hard drive out of one computer and installing it in a second computer that
has a different motherboard and hardware. The steps you take depend on the guest operating system in
the virtual machine. In most cases, a guest operating system that is installed on a physical disk or unused
partition cannot boot outside of the virtual machine, even though the data is available to the host system.
See the Dual-Boot Computers and Virtual Machines technical note on the VMware Web site for
information about using an operating system that can also boot outside of a virtual machine.
After you configure a virtual machine to use one or more partitions on a physical disk, do not modify the
partition tables by running fdisk or a similar utility in the guest operating system. If you use fdisk or a
similar utility on the host operating system to modify the partition table of the physical disk, you must
recreate the virtual machine physical disk. All files that were on the physical disk are lost when you modify
the partition table.
Important You cannot use a physical disk to share files between the host system and a guest operating
system. Making the same partition visible to both the host system and a guest operating system can
cause data corruption. Instead, use shared folder to share files between the host system and a guest
operating system.
VMware, Inc.
147