cordless area light owner'

CAL180G
CORDLESS AREA LIGHT
OWNER’S OPERATING MANUAL
DESCRIPTION
1.
2.
3.
4.
Battery Pack(Not Included)
Depress Both Latches To Release
Handle
Press once for HIGH or twice LOW. Turn the lights off
by pressing a third time.
4
3
1
2
DESCRIPTION
Important!
It is essential that you read the instructions in this manual before
operating this machine.
Subject to technical modifications.
English
GENERAL POWER TOOL SAFETY WARNINGS
■
WARNING
When using battery operated tools, basic safety
precautions should always be followed to
reduce the risk of fire, leaking batteries and
personal injury, including the following: Read all
these instructions before operating this product
and save these instructions.
■
■
■
■
■
■
■
■
■
■
■
■
■
Have your light repaired by a qualified person.
This tool is in accordance with the relevant safety
requirements. Repairs should only be carried out by
qualified person using original spare parts, otherwise
this may result in considerable danger to the user.
WARNING
Do not operate flashlight or charger near
flammable liquids or in gaseous or explosive
atmosphere. Internal sparks may ignite fumes.
Know your flashlight. Read user’s manual carefully.
Learn its applications and limitations as well as the
specific potential hazards related to this flashlight.
Use only with recommended battery pack and
charger. Any attempt to use another battery pack
will cause damage to your light and could possibly
explode, cause a fire, or personal injury.
Remove battery pack from flashlight before replacing
bulb or performing any routine maintenance or
cleaning.
Do not disassemble your flashlight.
Do not place flashlight or battery pack near fire
or heat. This will reduce the risk of explosion and
possibly injury.
Do not dispose of a worn out battery pack by
incinerating. Do not incinerate the battery, even if it
is severely damaged or completely worn out.
The battery may explode in fire.
Do not store your flashlight in a damp or wet
location. Also, do not store in location where the
temperature may reach or exceed 40°C (104°F). For
example, inside sheds, vehicles, or metal buildings
in the summer.
Do not permit children to use flashlight unsupervised.
It is not a toy. The temperature of the bulb can
become hot after being on for an extended period of
time. This hot temperature may cause burn injury if
touched.
Keep work area clean. Cluttered areas and benches
invite accidents.
Avoid dangerous environments.
Keep light dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use
brake fluids, gasoline, petroleum-based products or
any strong solvent to clean your light.
Stay alert. Watch what you are doing and use
common sense. Do not rush.
Check damaged parts. Before further use of this
light, a part that is damaged should be carefully
checked to determine that it will operate properly
and perform its intended function. Do not use
flashlight if it does not function properly.
WARNING
Lens and bulb become hot during use. During or
immediately after use, don’t lay flashlight flat on
lens surface.
Handle flashlight with care around any
flammable surface.
If bulb has been lit, let flashlight cool for several
minutes before changing bulb.
Do not use or permit use of flashlight in bed or
sleeping bags. A burn injury could result.
■
■
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk
of electric shock, fire, or serious personal injury.
If under abusive conditions, liquid is ejected from
the battery, avoid contact. If this accidentally occurs,
flush with water. If liquid contacts eyes additionally,
seek medical help. This will reduce the risk of
explosion and possibly injury.SPECIFICATIONS
WARNING
To reduce the risk of serious personal injury,
never us any cordless product in the presence
of an open flame. An exploded battery can
propel debris and chemicals. If exposed, flush
with water immediately.
■
S
■
4
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.
This appliance is not intended for use by young
children or infi rm persons unless they have been
adequately supervised by a responsible person to
ensure that they do not play with the appliance.
English
■
Keep children and visitors away. Visitors should wear
safety glasses and be kept a safe distance from the
work area. Do not let visitors contact the tool or
extension cord.
APPLICATION
Use the product for the purposes listed below
■
To illuminate any areas requiring additional light.
■
To illuminate distant objects.
SPECIFICATIONS
OPERATION
MODEL
CAL180G
Rating of Blub
18V
Weight
0.32 kg
TO INSTALL BATTERY PACK (NOT INCLUDED)
■
Place battery pack in your fl ashlight. Align raised rib
on battery pack with groove inside. See Figure 1.
■
Make sure the latches on battery pack snap in place
and battery pack is secured in fl ashlight before
beginning operation.
0.6A
BPL-1820
Battery Pack
(not included)
BPL-1815
TO REMOVE BATTERY PACK (NOT INCLUDED)
■
Switch off your flashlight.
■
Locate latches of battery pack and depress to
release battery pack from your flashlight.
■
Remove battery pack from your flashlight.
ABP1801G
ABP1802G
BCL-1800
Compatible
Charger
(not included)
BCS618G
BATTERY PROTECTION FEATURES
RYOBI 18V lithium-ion batteries are designed with
features that protect the lithium-ion cells and maximise
battery life. Under some operating conditions, these
built-in features may cause the battery and the tool
it is powering to act differently from nickel-cadmium
batteries.
During some applications, the battery electronics may
signal the battery to shut down, and cause the tool to
stop running. To reset the battery and tool, release the
trigger and resume normal operation.
NOTE: To prevent further shut down of the battery, avoid
forcing the tool.
If releasing the trigger does not reset the battery and
tool, the battery pack is depleted. If depleted, the battery
pack will begin charging when placed on the lithium-ion
charger.
BCL-1418
ACR1800G
ACR1800
ACC1800
RUN TIME PERFORMANCE *
Battery
type
ABP1801G
BPL-1815
BPL-1820
1.7Ah NiCd
1.4Ah Li-ION
2.4Ah Li-ION
Mode
High
Low
High
Low
High
Low
Runtime
(Hours)
15+
70+
5+
30+
10+
60+
* Internal testing with new batteries, run times may vary.
WARNING
Do not attempt to disassemble the battery pack.
Fire or injury may result.
5
English
MAINTENANCE
WARNING
When servicing, use only identical replacement
parts. Use of any other part may create a hazard
or cause product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil grease, etc.
WARNING
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.
come in contact with plastic parts.They contain
chemicals that can damage, weaken or destroy
plastic.
Do not abuse power tools. Abusive practices can
damage tool as well as workpiece.
WARNING
Do not attempt to modify this tool or create
accessories not recommended for use with
this tool. Any such alteration or modifi cation
is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
WARNING
The bulb is not intended to be repaired or
replaced by the customer. It should be repaired
at an Authorised service centre.
6
TECHTRONIC INDUSTRIES (AUSTRALIA) PTY. LTD.
Level 1, 660 Doncaster Road,
Doncaster, Victoria 3108
Australia.
Tel: 1300 361 505 Fax No.: 1800 807 993 www.ryobi.com.au
85-187-D01
Download PDF

advertising