HP ProLiant DL580 Generation 8 (Gen8)

QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Overview
The HP ProLiant DL580 Gen8 Server is an enterprise-grade four socket (4S) x86 server offering breakthrough performance, rock-solid
reliability, and compelling consolidation and manageability efficiencies. It is ideal for mission-critical enterprise, business intelligence,
and database applications.
Featuring Intel® Xeon® E7-4800/8800 v2 processors, the DL580 Gen8 offers blazing fast results with enhanced processor
performance, more memory slots (96 DIMMs), greater IO bandwidth (9 PCIe Gen3.0 slots), and increased storage performance (12 Gbps
SAS). HP ProLiant DL580 Gen8 has security and data protection features for system resiliency that your business can depend on. With
intelligent manageability through HP OneView, iLO 4, and user-inspired features, you get faster, lower cost infrastructure
management.
Front View:
1.
One front video port
2.
Server lifting handles
3.
Universal Tool-less "Snap in" sliding rail solution
4.
4U (7" height) form factor
5.
Support for up to four Intel® Xeon® 4800/8800 v2
Processors
6.
Up to 9 slots supported; all full-length/full-height
7.
Quick removal access panel
8.
Quick release lever for Processor and Memory drawer
9.
Slide out Systems Insight Display
10. Power button
11. Health and Network LEDs
12. Unit ID LED
13. Front accessible Processor and memory drawer
14. 4 Hot Plug Fans (eight rotors with N+1 redundancy)
15. Asset tag
16. Support for up to 10 Small Form-Factor (SFF) drives
17. Two front accessible USB 2.0 ports
Rear View:
1. NIC ports
2. Serial port
3. Video port
4. Four (4) USB ports
5. Hot Plug Redundant Power Supplies (2 or 4 depending on the
model)
6. 9 PCIe 3.0 IO Expansion Slots
7. iLO connector
DA - 14743 North America — Version 5 — June 10, 2014
Page 1
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
Fifteen-Core Processors
One or more of the
Intel® Xeon® E7-4890v2 (2.8GHz/15-core/37.5MB/155W) Processor
following depending on
Intel® Xeon® E7-4880v2 (2.5GHz/15-core/37.5MB/130W) Processor
model
Intel® Xeon® E7-4870v2 (2.3GHz/15-core/30MB/130W) Processor
Intel® Xeon® E7-8880Lv2 (2.2GHz/15-core/37.5MB/105W) Processor
NOTE: This is a power optimized processor
Twelve-Core Processors
Intel® Xeon® E7-4860v2 (2.6GHz/12-core/30MB/130W) Processor
Intel® Xeon® E7-4850v2 (2.3GHz/12-core/24MB/105W) Processor
Intel® Xeon® E7-8857v2 (3.0GHz/12-core/30MB/130W) Processor
NOTE: This is frequency optimized processor suited high performance computing applications
Ten-Core Processors
Intel® Xeon® E7-4830v2 (2.2GHz/10-core/20MB/105W) Processor
Intel® Xeon® E7-8891v2 (3.2GHz/10-core/37.5MB/155W) Processor
NOTE: This is a lower core, higher frequency processor for software licensing cost optimization
Eight-Core Processors
Intel® Xeon® E7-4820v2 (2.0GHz/8-core/16MB/105W) Processor
Six-Core Processors
Intel® Xeon® E7-4809v2 (1.9GHz/6-core/12MB/105W) Processor
Intel® Xeon® E7-8893v2 (3.4GHz/6-core/37.5MB/155W) Processor
NOTE: This is a lower core, higher frequency processor for software licensing cost optimization
Cache Memory
One of the following
depending on model
37.5MB (1 x 37.5MB) Level 3 cache (E7-4890 v2, E7-8880Lv2, E7-4880v2, E7-8891v2, E7-8893v2)
30MB (1 x 30MB) Level 3 cache (E7-8857v2, E7-4870v2, E7-4860v2)
24MB (1 x 24MB) Level 3 cache (E7-4850v2)
20MB (1 x 20MB) Level 3 cache (E7-4830v2)
16MB (1 x 16MB) Level 3 cache (E7-4820v2)
12MB (1 x 12MB) Level 3 cache (E7-4809v2)
Chipset
Intel® C602J Chipset
Intel® Xeon® E7-4800/8800 v2 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
DA - 14743 North America — Version 5 — June 10, 2014
Page 2
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
Upgradeability
Up to:
Four (4) processors
Ninety-six (96) DDR3 DIMM slots
Nine (9) PCIe Gen3 expansion slots
NOTE: PCIe slot availability is dependent on the number of processors installed. Please refer to the
"Expansion slots" section for more details.
Ten (10) SFF internal HDD/SSD drive bays
NOTE: Five drive bays come standard. An optional backplane kit with five drive bays can be ordered for ten
drives.
Four (4) redundant hot-plug power supplies
System Fault
Management and
Diagnostics
HP ProLiant DL580 Gen8 offers advanced error recovery, component quarantine, fault tolerance and event
reporting features to enable class-leading availability and rock-solid reliability that businesses can depend
on. The DL580 Gen8 server firmware features advanced machine check architecture and memory fault
tolerance capabilities that customers need for running their mission-critical applications. These advanced
fault management features combine with quality components (HP Qualified Options) and extensive
qualification to provide a high degree of system availability.
HP Advanced Error Recovery
Introduced with the HP ProLiant DL580 Gen8, HP Advanced Error Recovery enables applications to recover
from uncorrectable errors found in processor, cache and memory during execution. The system firmware
works with the operating system and/or hypervisor and/or end-application to enable the optimal recovery
response so that the impact of the error can be avoided or minimized. Where such an error would have
crashed the system in the past, with HP Advanced Error Recovery, the system can continue to function
with limiting the impact of the error to a killed/re-started thread, process and/or virtual machine.
NOTE:
Supported on Intel® E7-4800/8800 v2 based systems only
On select Operating Systems, Hypervisors and end-applications that support Intel Machine Check
Architecture Recovery feature.
Windows Server 2012 R2 and Hyper-V 2012 R2
Windows Server 2012 (requires Microsoft hotfix 2901012) and Hyper-V 2012
Redhat Enterprise Linux 6.4 and later
SLES 11 SP3 and later
HP Memory Quarantine
HP Memory Quarantine Identifies memory regions containing uncorrectable hardware errors by using a
patrol scrubber and isolates the bad memory location before it affects other data. If an error is found, the
hardware attempts to correct it. If the hardware cannot correct the error, the platform firmware notifies
the operating system. Depending on the state of the memory pages associated with the identified memory
region, the OS or hypervisor may take those pages out of the available pool. If the memory pages are
already committed to a virtual machine (VM), the OS or hypervisor may choose to shut down the
associated VM (Guest OS) or cause a Machine Check Exception to the Guest OS. The associated VM (Guest
OS) might in turn close down the affected thread or process or it might shut down on its own. You can
restart the halted VM or process once you replace the bad memory at the server's next maintenance cycle.
NOTE:
Supported on Intel® E7-4800/8800 and E7 v2 based systems only
DA - 14743 North America — Version 5 — June 10, 2014
Page 3
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
On select Operating Systems, Hypervisors and end-applications that support Machine Check
Architecture Recovery functionality.
Windows Server 2012 R2 and Hyper-V 2012 R2
Windows Server 2012 (requires Microsoft hotfix 2901012) and Hyper-V 2012
Windows Server 2008 R2 and Hyper-V 2008 R2
Windows Server 2008 and Hyper-V 2008
Redhat Enterprise Linux 6.4
SLES 11 SP3
HP Advanced Error Containment
The DL580 Gen8 features advanced PCIe error containment capability that prevents corrupted data
propagation. If data corruption is found on the PCIe bus, the system re-sets the PCIe root port and restarts the transaction. This feature helps protect customer data and prevents the error from creating a
chain of failures across the datacenter.
NOTE:
Supported on Intel® E7-4800/8800 and E7 v2 based systems only
HP Advanced Fault Resiliency
Double Data Device Correction (DDDC) - Detects and corrects up to two DRAM chip failures for every
x4 DIMM in the server. DDDC requires memory lockstep mode and may impact performance to
varying degrees depending on workload memory access characteristics.
NOTE: Supported on Intel® E7-4800/8800 based systems only.
Single Data Device Correction (SDDC) - Detects and corrects one DRAM chip failures for every x4
DIMM in the server. Further corrects single-bit errors after one DRAM chip failure. SDDC is supported
in performance mode and does not impact system performance.
NOTE: Supported on Intel® E7-4800/8800 based systems only.
Online Memory Sparing - Tracks excessive number of correctable errors and copies the contents of
an unhealthy rank to an available spare rank in advance of multi-bit or persistent single-bit failures
that may result in future uncorrectable faults. Since a DIMM or a rank is needed to perform sparing,
this technique reduces the total amount of available memory by the amount of memory used for
sparing.
Memory Mirroring - System maintains two copies of all data. If an uncorrectable memory error
occurs, the system automatically retrieves the good data from the mirrored (redundant) copy.
Memory Mirroring consumes 50% of the system memory capacity.
NOTE: Memory mirroring will be supported in a system firmware update post initial launch.
Redundant Interconnects and Failover - The DL580 Gen8 system and Intel® Xeon® E7-4800/8800 v2
processors combine to provide a high degree of fault tolerance and failover capabilities for key
processor-processor or memory-processor links or clocks.
Hot-plug redundant power supplies and hot-plug fans - The DL580 Gen8 server features N+N
redundant power supplies and N+1 rotor (each fan module contains two rotors) redundancy to keep
your system running in the unlikely case a power supply or rotor malfunctions.
Each fan contains two independent rotors. If one rotor fails, system continues operation in a
degraded condition with remaining rotors. If two rotors fail, system initiates an OS shutdown.
Two rotor failures is a highly unlikely event.
If a fan module (i.e. two rotors) is removed as a hot-plug event, the replacement fan module
must be installed within approximately 60 seconds before the system initiates an OS
shutdown.
DA - 14743 North America — Version 5 — June 10, 2014
Page 4
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
Memory
One of the following
depending on Model
Type
HP SmartMemory
DDR3 Registered (RDIMM) and Load Reduced (LRDIMM)
DIMM Slots Available
96 DIMM slots
Maximum
6TB (96 x 64GB)
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant
Server. HP SmartMemory is required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server. NOTE:
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz,
1333MHz, or 1066MHz. Please see Memory Population Table below or the Online Memory Configuration
Tool at: www.hp.com/go/ddr3memory-configurator.
FlexibleLOM
HP ProLiant Gen8 servers offer a new flexible network technology - FlexibleLOMs, which offers customers
a choice of 1Gb, 10Gb, or 10Gb base-T Ethernet or converged networking in their embedded adapter.
HP Ethernet 1Gb 4-port 331FLR FIO Adapter
HP Ethernet 1Gb 4-port 366FLR FIO Adapter
HP Ethernet 10Gb 2-port 533FLR-T FIO Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ FIO Adapter
NOTE: This adapter does not support FCOE Boot from SAN functionality on VMWare.
HP Ethernet 10Gb 2-port 560FLR-SFP+ FIO Adapter
HP Ethernet 10Gb 2-port 561FLR-T FIO Adptr
NOTE: For additional details see the Networking Section of this document.
NOTE: Wake-on-Lan feature is not supported on the DL580 Gen8 with FlexLOMs
Expansion Slots
NOTE: Up to 9 slots supported; all full-length/full-height. Standard: 4 PCI-E 3.0 x8, 5 PCI-E 3.0 x16.
Expansion Slot
#
Technology
Width
Connector
Width*
1
PCIe 3.0
x16
x16
4
2
PCIe 3.0
x16
x16
3
3
PCIe 3.0
x16
3
4
PCIe 3.0
x8
3
5
PCIe 3.0
2
6
2
Processor
Bus / Dev
Number**
Form Factor
Notes
FH/FL
N/A
C0/02/0
FH/FL
N/A
x16
80/03/0
FH/FL
N/A
x16
80/02/0
FH/FL
N/A
x8
x16
80/02/1
FH/FL
N/A
PCIe 3.0
x16
x16
40/03/0
FH/FL
N/A
7
PCIe 3.0
x8
x16
40/02/0
FH/FL
N/A
2
8
PCIe 3.0
x8
x16
40/02/1
FH/FL
N/A
1
9
PCIe 3.0
x16
x16
00/03/0
FH/FL
N/A
4
C0/03/0
DA - 14743 North America — Version 5 — June 10, 2014
Page 5
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
NOTE: PCIe slot availability is dependent on the number of processors installed.
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest
bus).
FL= Full length; FH = Full height.
Storage Controller
One of the following
depending on Model
HP Smart Array P830i/2G FBWC Controller
The Flash Backed Write Cache (FBWC) increases cache data retention capabilities from two days of existing
battery backed write cache (BBWC) to infinite data retention.
Delivers 12 Gb/s line rate performance
Standard on all Models
Supports HP Secure Encryption as an option
Transportable data protection
Increases overall controller performance
NOTE: Please refer to the HP Smart Array P830 Controller QuickSpecs for more information.
Internal Storage Devices Hard Disk Drive
Internal SAS lower and upper backplanes support up to ten SFF hard disk
Backplane
drives or solid state drives
NOTE: For CTO models, five (5) lower drive bays ship standard and five (5) upper drive bays can be ordered
separately. For pre-configured models, please refer to the pre-configured models section below.
Diskette Drive
None
Optional Optical Drive
None
Hard Drives
None ship standard
Maximum Internal
Storage
Hot Plug SFF SAS
Hot Plug SFF SAS SSD
Hot Plug SFF SATA SSD
12 TB
16 TB
8 TB
10 x 1.2 TB
10 x 1.6 TB
10 x 800 GB
Interfaces
Serial
Video
Network RJ-45
iLO 4 Remote Management
micro-SD Slot
USB 2.0 Ports
1
1 front; 1 rear
4
1
1
8 total: 2 front; 4 rear; 2 internal
DA - 14743 North America — Version 5 — June 10, 2014
Page 6
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
Industry Standard
Compliance
ACPI 2.0. Compliant
PCIE 2.0 Compliant
PXE Support
WOL Support
NOTE: Not supported with FlexLOMs on DL580 Gen8
Physical Address Extension (PAE) Support
Microsoft® Logo certifications
USB 2.0 Support
Server Power Cords
Server ships with high-voltage server to PDU power cord
NOTE: If customers require a power cord, they can check the power cord matrix for the appropriate sku.
Please see the following power cord matrix for details: http://www.hp.com/go/powercordmatrix
Common Slot Power
Supply
One of the following
depending on power
requirements
HP 1500W Common Slot Platinum Plus Hot Plug Power Supply
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply
NOTE: 1500W power supply supports high line voltage only
NOTE: A minimum of two (2) power supplies are required. Four (4) 1500W power supplies offers N+N
redundancy for highly loaded configurations.
Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to
determine the right size power supply for your server configuration. The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor.
HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of
ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest
power supply efficiency without degrading system performance. HP CS power supplies are tested by the
Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP
CS power supply options provide efficiency ratings of up to 94% (80 Plus Platinum) and are available in
three power output options - 460W, 750W, and 1200W - allowing the customer to "right-size" a power
supply for their specific server configuration. All HP Common Slot power sources are UL, CE Mark
Compliant, hot-plug and support redundant configurations.
HP CS Platinum Plus power supplies are required when enabling HP's Intelligent Power Discovery (IPD)
solution. IPD is the first technology to create an automated, energy-aware network between IT systems
and facilities. This allows your company to reclaim millions of dollars in wasted power capacity and
downtime costs across data centers. For more information on HP's IPD solution, go to
www.hp.com/go/ipd.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the
same output and efficiency rating. If non-matched power supplies are inserted you will get errors and
operation will fail.
System Fans
4 Hot Plug Fans (eight rotors with N+1 redundancy)
DA - 14743 North America — Version 5 — June 10, 2014
Page 7
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
4U rack
HP Server UEFI ROM
Legacy Mode or Unified
Extensible Firmware
Interface (UEFI) Mode
HP's ProLiant System BIOS is an EDK2 UEFI solution, and adheres to the latest
revisions of UEFI Class 2 specifications which supports both legacy boot and
UEFI boot operation. The HP ProLiant DL580 Gen8 defaults to legacy boot
operation and can be factory or field configured for UEFI boot operation.
NOTE: For UEFI boot operation, boot environment and OS image installations
should be configured properly to support UEFI.
NOTE: For more information on HP's ProLiant System BIOS and UEFI, see the
UEFI Information Library: http://www.hp.com/go/uefi/docs.
NOTE: HP UEFI FIO Setting (758959-B21) can be selected to configure the
system in UEFI mode in the factory.
To modify the server configuration ROM default settings, press F9 in the HP
ProLiant POST screen to enter the UEFI System Utilities screen. By default, the
System Utilities menus are in the English language.
UEFI enables numerous new capabilities, including both industry standard
functionality and features specific to HP ProLiant servers. Following are some
of the features that UEFI enables and that the HP ProLiant DL580 Gen8 can
support when configured for UEFI boot operation:
Secure Boot - A new feature in which the system firmware, option card
firmware, operating systems, and software collaborate to greatly
enhance platform security.
Operating system specific functionality - Microsoft Windows 2012
supports several features only when installed in UEFI mode.
Support for > 2.2 TB (using GPT) boot drives - Such drives could
previously only be used for boot drives when using RAID solutions such
as HP Smart Array.
UEFI Shell - Provides a pre-boot environment for running scripts and
tools. The HP ProLiant UEFI Shell provides both standard capabilities as
well as numerous enhancements.
PXE boot support for IPv6 networks.
PXE Multicast Boot allowing for faster PXE deployments for large
numbers of servers.
Boot support for option cards that only support a UEFI option ROM.
NOTE:
DA - 14743 North America — Version 5 — June 10, 2014
Page 8
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
When the server is configured for UEFI Boot Mode, PXE servers must be
configured with a UEFI boot image.
When the server boots in UEFI mode, it does not boot media with a
legacy OS installation. This includes DOS targets and Windows or Linux
systems installed in Legacy mode. The reverse is also true for servers
that boot in Legacy mode.
If Microsoft Windows 2008 or Windows 2008 R2 is used in UEFI Boot
Mode, UEFI Optimized Mode must be disabled (this option is enabled by
default). This is required to work around an issue in Windows 2008 /
2008 R2 that requires legacy BIOS components necessary for video
operations in Windows.
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page http://www.hp.com/support/DL580Gen8
On System Management
HP iLO Management
HP iLO Management is a comprehensive set of embedded management
features supporting the complete lifecycle of the server, from initial
deployment, through ongoing management, to service alerting and remote
support. HP iLO Management Engine comes standard on all HP ProLiant Gen8
servers. The HP iLO Management portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor is
the core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring
and alerting capability without OS agents, that starts working the moment a
power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for
increased stability and shorter downtimes; 100% configuration history;
Health and service alerts and easy export and upload to Service and
Support.
HP Intelligent Provisioning: Lets customers provision and configure a
single server without any separate media.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot
Process. Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning for additional
information and to view usage videos. Use the Service Pack for ProLiant (SPP)
at www.hp.com/go/spp to get firmware and software updates.
HP iLO Mobile App: Enables the ability to access, deploy, and manage
your server anytime from anywhere from select smartphones and
mobile devices. For additional information please visit:
www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO
Management Engine technologies whitepaper
DA - 14743 North America — Version 5 — June 10, 2014
Page 9
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
HP Insight Management
HP Service Pack for
ProLiant
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM)
provide a comprehensive approach to firmware and system software
maintenance. Together they provide better operating stability and ensure
maximum uptime. The SPP will be updated at a predictable cadence, typically
coinciding with new HP server hardware launches. By enabling firmware to be
updated online and integrating firmware and system software updates in one
operation, HP SUM and the SPP offer faster updates of individual servers and
dramatically faster updates of entire BladeSystem enclosures. Further
improving system uptime and stability is the fact that HP provides 12 months
of support for each Service Pack for ProLiant release.
The user experience around HP SUM and the SPP has been improved in several
ways, starting with the web download. A single web page provides access to a
single download containing both the latest version of HP SUM and the latest
SPP. Optional smaller subsets with only specific types of servers or specific
operating systems are offered to save on download time. The HP SUM
application provides a straightforward, intuitive user interface that guides the
user through the steps of discovery, analyses and update, providing
comprehensive information on available updates, criticality and
interdependencies. This information is also available in reports. By providing
the option of multiple local or shared repositories which can be easily updated
from hp.com, HP SUM provides the tools to optimize stability and consistency
throughout the company. While HP SUM and the SPP recommend the
combinations of firmware and system software that HP has found to be the
best practice, the application gives customers the flexibility to set their own
specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both within the
server as well as in interaction with the BladeSystem enclosure components
(Onboard Administrator and Virtual Connect). This testing ensures the highest
quality as well as providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates and order of
update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can be
downloaded from www.hp.com/go/spp/download. More information can be
found: http://www.hp.com/go/SmartUpdate, www.hp.com/go/spp and
http://www.hp.com/go/hpsum
DA - 14743 North America — Version 5 — June 10, 2014
Page 10
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
Intelligent Manageability HP Systems Insight Manager
SmartStart
Redundant ROM
Remote Flash ROM
Management Agents
Integrated Management Log (IML)
Automatic Server Recovery-2 (ASR-2)
ROM-Based Setup Utility (RBSU)
Dynamic Sector Repairing (with Smart Array Controllers)
Drive Parameter Tracking (with Smart Array Controllers)
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
Redundant/adaptive load balancing NIC Support
Hot Spare Boot
NOTE: Upon the event of a failed processor in a multi-processing environment, the system will
automatically reboot and use the remaining good processor(s).
HP Insight Online
HP Insight Online is a new capability available through the HP Support Center portal for one stop, secure
access to product and HP support information specific to your IT environment. Insight Online can
automatically display devices remotely monitored by HP Insight Remote Support. With Insight Online's
easy navigation you can efficiently track your IT support contracts and device status from anywhere and at
any time. www.hp.com/go/insightonline
HP Proactive Insight
experience
Prevent problems with innovative, automated monitoring tools and proactive services. The HP Proactive
Insight experience consists of using Insight Online, Insight Remote Support, and Proactive Care Support
Service as one integrated solution. The Proactive Insight experience provides you with expert advice and
personalized, cloud-based automated IT support, helping to prevent unplanned down time and solve
problems quickly. For more information, visit: www.hp.com/go/proactiveinsightexperience
Security
Power-on password
Keyboard password
External USB port enable/disable
Network Server Mode
Serial interface control
Administrator's password
Trusted Platform Module (TPM)
Intel® Secure Key
HP Secure Encryption (Smart Array Controller)
HP Advanced Data Guard (Smart Array Controller)
DA - 14743 North America — Version 5 — June 10, 2014
Page 11
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Standard Features
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available
for three years from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Enhancements to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day
response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts.
These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel
and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR
parts are also designed for easy replacement but may involve added complexity. Customers may choose
to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited
warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 14743 North America — Version 5 — June 10, 2014
Page 12
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Optional Features
HP Insight management
HP Insight Control
HP iLO Advanced
HP Matrix Operating
Environment
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to deploy,
migrate, monitor, remote control, and optimize your IT infrastructure through
a single, simple management console. For more information, see
http://www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, see:
http://www.hp.com/services/insight.
HP Integrated Lights-Out Advanced License a product option, providing smart
remote server management without compromise. iLO Advanced unlocks the
full set of remote administration functionality for all HP ProLiant servers by
activating the full Virtual Keyboard Video and Mouse remote console, multiuser collaboration, console record and replay, GUI-based and scripted virtual
media and virtual folders, and enhanced security and power management
functionality. For more information, see: http://www.hp.com/go/iloadvance
The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity
servers is an integrated command center that helps you instantly adjust to
dynamic business demands. This advanced infrastructure management
software lets you reduce the cost of common data center tasks by up to 40
percent while keeping pace with your changing business.
The HP Matrix OE includes the automated provisioning, optimization, and
recovery management capabilities for HP CloudSystem Matrix, the ideal
platform for private cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
High Performance
Clusters
HP Cluster Platforms
HP HPC Interconnects
HP Insight Cluster
Management Utility
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management of hyperscale
clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
DA - 14743 North America — Version 5 — June 10, 2014
Page 13
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Optional Features
Storage Software
Whether you need to solve a specific data protection, archiving, or storage command and control
challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than
HP storage software. Our storage software helps you reduce costs, simplify storage infrastructure,
protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HP data protection and recovery software
will cost-effectively protect you against disaster and ensure business continuity.
Data Archive and Migration Software
HP's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently accessed
or less valuable data to lower cost storage.
Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs and provides the command
and control foundation you need to efficiently manage and visualize your physical and virtual
environments.
Data Replication Software
HP offers array-based and host-based replication software for use in disaster recovery, testing,
application development and reporting.
Storage Device Management Software
Maximize your investment in HP storage and networking with software that enables hardwarespecific configuration, performance tuning and connectivity management.
HP StoreVirtual VSA
With HP StoreVirtual VSA you can use the power of virtualization to turn a set of heterogeneous and
disconnected physical disk drives in your servers and storage devices into a single pool of logical
storage capacity.
NOTE: For more information available Storage Software including QuickSpecs, please see:
www.hp.com/go/storage/software.
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
DA - 14743 North America — Version 5 — June 10, 2014
Page 14
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Optional Features
HP Simple Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products
not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for
assistance. http://www.hp.com/products/configurator
DA - 14743 North America — Version 5 — June 10, 2014
Page 15
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server capabilities requires a service partner who understands your
increasingly complex business technology environment. That's why it makes sense to team up with the
people who know HP infrastructure hardware and software best - the experienced professionals at HP
Services.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack services offer complete care and support expertise with committed response choices
designed to meet your IT and business needs.
HP Foundation Care services offer scalable reactive support-packages for HP servers and software. You
can choose the type and level of service that is most suitable for your IT and business needs. HP Proactive
Care delivers high levels of system availability through proactive service management and advanced
technical response.
Recommended HP Care Pack Services for your HP product
Optimized Care
Standard Care
Related Services
3-Year HP 6 hour Call to Repair Response, Proactive Care
Combined reactive and proactive support for hardware and software helping optimize your systems and
delivering high levels of availability through proactive service management and advanced technical
response. Hardware problem resolution to return the hardware in operating condition within 6 hours of the
initial service request. A Technical Solution Specialist, as your single point of contact, will own your call or
issue end to end until resolved.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
3-Year HP 24x7 4 hour response, Proactive Care Service
This service gives you combined reactive and proactive support including rapid access to our Advanced
Solution Center to manage and prevent problems and a Technical Support Specialist with a broad level of
technical knowledge that will engage with additional technical expertise as needed from HP's vast global
resources.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
HP Proactive Care Personalized Support - Environmental Option
The Personalized Support option provides an assigned Account Support Manager who can bring best
practices from across the industry plus extra technical skills to your IT team. This option is only available
as an add-on to HP Proactive Care Support.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
HP Installation and Startup for HP Insight Control
DA - 14743 North America — Version 5 — June 10, 2014
Page 16
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Service and Support
HP Installation and Startup Service for HP Insight Control provides for the deployment and basic
configuration of HP Insight Control software on a single central management server (CMS) for HP ProLiant.
Only one instance of this service is required per CMS.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf
HP Installation and Startup for HP Systems Insight Manager
Provides for installation and configuration of the latest version of HP Systems Insight Manager, together
with the installation and startup of HP Service Essentials Remote Support Pack. Only one instance of this
service is required per CMS.
http://h20195.www2.hp.com/v2/GetPDF.aspx/5982-4143EN.pdf
Insight Online/Insight
Remote Support
HP Support Center
Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and problem
resolution. This comes at no additional cost with your HP solution. Learn more about Insight Remote
Support http://www.hp.com/go/insightremotesupport and Insight Online
http://www.hp.com/go/insightonline
NOTE: Insight Remote Support is a prerequisite for Proactive Care
Personalized online support portal with access to information, tools and experts to support HP business
products. Submit support cases online, chat with HP experts, access support resources or collaborate with
peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalize IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty,
HP Care Pack or HP contractual support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
For more information
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction.
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant
DA - 14743 North America — Version 5 — June 10, 2014
Page 17
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Pre-configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped
separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
High Performance Models
HP ProLiant DL580 Gen8
E7-4890v2 4P 128GB-R
P830i SAS 5 SFF 1500W
RPS Server
728544-001
Processor(s)
(4) Intel® Xeon® E7-4890v2 (2.8GHz/15-core/37.5MB/155W) Processors
Cache Memory
37.5MB (1 x 37.5MB) Level 3 cache
Memory
IO Expansion
128GB (16 x 8GB DIMMs) PC3-14900R DIMMs (DDR3) installed in (8)
Memory Cartridges
(9) PCIe Gen3.0 I/O Expansion slots (5 x16 slots; 4 x8 slots)
Network Controller
HP FlexFabric 10Gb 2P 534FLR-SFP+ Adapter
Storage Controller
HP Smart Array P830i/2GB FBWC 12 Gbps SAS controller
Bays and Hard Drives
Ten (10) SFF HDD/SSD drive bays. No drives ship standard
Optical Drive
None
Power Supply
(4) HP 1500W Common Slot Platinum Plus Hot Plug Power Supplies
Fans
Four Hot Plug redundant fans standard (3+1)
Integrated Lights Out
Integrated Lights-Out 4 (iLO 4) ships standard
Insight Control
Form Factor
HP Insight Control No Media single server license, including 1 year of 24x7
Technical Support and Updates
Rack 4U (rail kit is included)
BIOS
Legacy BIOS (default) or UEFI BIOS (field configurable)
Warranty
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response
DA - 14743 North America — Version 5 — June 10, 2014
Page 18
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Pre-configured Models
HP ProLiant DL580 Gen8
E7-4850v2 4P 128GB-R
P830i/2G 534FLR-SFP+
1500W RPS Svr
728546-001
Processor(s)
(4) Intel® Xeon® E7-4850v2 (2.3GHz/12-core/24MB/105W) Processors
Cache Memory
24MB (1 x 24MB) Level 3 cache
Memory
IO Expansion
128GB (16 x 8GB DIMMs) PC3-14900R DIMMs (DDR3) installed in (8)
Memory Cartridges
(9) PCIe Gen3.0 I/O Expansion slots (5 x16 slots; 4 x8 slots)
Network Controller
HP FlexFabric 10Gb 2P 534FLR-SFP+ Adapter
Storage Controller
HP Smart Array P830i/2GB FBWC 12 Gbps SAS controller
Bays and Hard Drives
Ten (10) SFF HDD/SSD drive bays. No drives ship standard
Optical Drive
None
Power Supply
(4) HP 1500W Common Slot Platinum Plus Hot Plug Power Supplies
Fans
Four Hot Plug redundant fans standard (3+1)
Integrated Lights Out
Integrated Lights-Out 4 (iLO 4) ships standard
Insight Control
Form Factor
HP Insight Control No Media single server license, including 1 year of 24x7
Technical Support and Updates
Rack 4U (rail kit is included)
BIOS
Legacy mode (default) or UEFI BIOS (field configurable)
Warranty
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response
Processor(s)
(2) Intel® Xeon® E7-4809v2 (1.9GHz/6-core/12MB/105W) Processors
Cache Memory
12MB (1 x 12MB) Level 3 cache
Memory
Network Controller
64GB (8 x 8GB DIMMs) PC3-14900R DIMMs (DDR3) installed in (4)
Memory Cartridges
(9) PCIe Gen3.0 I/O Expansion slots (5 x16 slots; 4 x8 slots)
NOTE: PCIe slot availability is dependent on the number of processors
installed. Please refer to the expansion slots section for more details.
HP Ethernet 1Gb 4P 331FLR Adptr
Storage Controller
HP Smart Array P830i/2GB FBWC 12 Gbps SAS controller
Bays and Hard Drives
Five (5) lower drive bays. No drives ship standard
Optical Drive
None
Power Supply
(2) HP 1200W Common Slot Platinum Plus Hot Plug Power Supplies
Fans
Four Hot Plug redundant fans standard (3+1)
Integrated Lights Out
Integrated Lights-Out 4 (iLO 4) ships standard
Form Factor
Rack 4U (rail kit is included)
BIOS
Legacy BIOS (default) or UEFI BIOS (field configurable)
Warranty
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response
Base Models
HP ProLiant DL580 Gen8
E7-4809v2 2P 64GB-R
P830i/2G 331FLR 1200W
PS Server
728547-001
IO Expansion
DA - 14743 North America — Version 5 — June 10, 2014
Page 19
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Smart Buys
HP ProLiant DL580 Gen8
E7-4830v2 2P 64GB-R
P830i/2G 531FLR 1200W
RPS Svr
746081-S01
HP ProLiant DL580 Gen8
E7-4870v2 2P 64GB-R
P830i/2G 531FLR 1200W
RPS Svr
746080-S01
Processor(s)
(2) Intel® Xeon® E7-4830v2 (2.2GHz/10-core/20MB/105W) Processors
Cache Memory
20MB (1 x 20MB) Level 3 cache
Memory
64GB (8 x 8GB DIMMs) PC3-14900R DIMMs (DDR3) installed in (4)
Memory Cartridges
(9) PCIe Gen3.0 I/O Expansion slots (5 x16 slots; 4 x8 slots)
NOTE: Slots 6-9 enabled by default, slots 1-5 require 4-sockets populated
IO Expansion
Network Controller
HP Ethernet 1Gb 4-port 331FLR Adapter
Storage Controller
HP Smart Array P830i/2GB FBWC 12 Gbps SAS controller
Bays and Hard Drives
Five (5) SFF drive bays, upgradeable to ten (10). No drives ship standard
Optical Drive
None
Power Supply
(2) HP 1200W Common Slot Platinum Plus Hot Plug Power Supplies
Fans
Four Hot Plug redundant fans standard (3+1)
Integrated Lights Out
Integrated Lights-Out 4 (iLO 4) ships standard
Form Factor
Rack 4U (rail kit is included)
BIOS
Legacy BIOS (default) or UEFI BIOS (field configurable)
Warranty
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response
Processor(s)
(2) Intel® Xeon® E7-4870v2 (2.3GHz/15-core/30MB/130W) Processor
Cache Memory
30MB (1 x 30MB) Level 3 cache
Memory
64GB (8 x 8GB DIMMs) PC3-14900R DIMMs (DDR3) installed in (4)
Memory Cartridges
(9) PCIe Gen3.0 I/O Expansion slots (5 x16 slots; 4 x8 slots)
NOTE: Slots 6-9 enabled by default, slots 1-5 require 4-sockets populated
IO Expansion
Network Controller
HP Ethernet 1Gb 4-port 331FLR Adapter
Storage Controller
HP Smart Array P830i/2GB FBWC 12 Gbps SAS controller
Bays and Hard Drives
Five (5) SFF drive bays, upgradeable to ten (10). No drives ship standard
Optical Drive
None
Power Supply
(2) HP 1200W Common Slot Platinum Plus Hot Plug Power Supplies
Fans
Four Hot Plug redundant fans standard (3+1)
Integrated Lights Out
Integrated Lights-Out 4 (iLO 4) ships standard
Form Factor
Rack 4U (rail kit is included)
BIOS
Legacy BIOS (default) or UEFI BIOS (field configurable)
Warranty
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response
DA - 14743 North America — Version 5 — June 10, 2014
Page 20
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration
HP Models
HP ProLiant DL580 Gen8 Configure-to-order Server
Factory Integrated Models ship with:
728551-B21
4U Server Chassis with front-accessible processor and memory drawer
Intel® 602J Chipset
Embedded HP Smart Array 12 G P830i Controller
NOTE: FBWC is required and should be selected separately when ordering)
(5) Hot-plug SAS/SATA SFF SSD or HDD Bays (Lower)
(9) PCIe Gen3.0 I/O Expansion slots (5 x16 slots; 4 x8 slots)
(8) USB 2.0 ports (2 front, 4 rear, 2 internal)
(2) video ports (1 front, 1 rear)
(1) microSD card slot
(1) Trusted Platform Module (TPM) connector
4 Hot Plug Fans (eight rotors with N+1 redundancy), front accessible
BIOS Legacy mode(default) or Unified Extensible Firmware Interface (UEFI) mode
(Optional)
HP Integrated Lights-Out 4 (iLO4) standard management
HP iLO4 Embedded Remote Support Technology
HP Insight Control Server Provisioning
HP Insight Online
HP Active Health System
System Insight Display
Rack rails and cable management arm
NOTE: PCIe slot availability is dependent on the number of processors installed. Please
refer to the "Expansion slots" section for more details.
NOTE: A minimum of two processors are required. The system may have three or four
processors installed.
NOTE: A minimum of two memory cartridges are required (one per processor).
NOTE: A minimum of two memory DIMMs are required per cartridge (minimum of four
DIMMs per server).
NOTE: A minimum of two power supplies are required.
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors
NOTE: All processor kits contain one processor. If two or more processors are desired,
select one xxxxxx-L21 and additional processors would be xxxxxx-B21.
Fifteen-Core Processors
HP DL580 Gen8 Intel® Xeon® E7-4890v2 (2.8GHz/15-core/37.5MB/155W) FIO Processor
Kit
HP DL580 Intel® Xeon® E7-4880v2 (2.5GHz/15-core/37.5MB/130W) FIO Processor Kit
DA - 14743 North America — Version 5 — June 10, 2014
728955-L21
728957-L21
Page 21
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
HP DL580 Gen8 Intel® Xeon® E7-4870v2 (2.3GHz/15-core/30MB/130W) FIO Processor
Kit
HP DL580 Gen8 Intel® Xeon® E7-4870v2 (2.3GHz/15-core/30MB/130W) Processor
Kit/S-Buy
HP DL580 Gen8 Intel® Xeon® E7-8880Lv2 (2.2GHz/15-core/37.5MB/105W) FIO
Processor Kit
Twelve-Core Processors
HP Memory
728959-L21
728959-S21
728953-L21
HP DL580 Gen8 Intel® Xeon® E7-4860v2 (2.6GHz/12-core/30MB/130W) FIO Processor
Kit
HP DL580 Gen8 Intel® Xeon® E7-4850v2 (2.3GHz/12-core/24MB/105W) FIO Processor
Kit
HP DL580 Gen8 Intel® Xeon® E7-8857v2 (3.0GHz/12-core/30MB/130W) FIO Processor
Kit
Ten-Core Processors
728963-L21
HP DL580 Gen8 Xeon® E7-8891v2 (3.2GHz/10-core/37.5MB/155W) FIO Processor Kit
HP DL580 Gen8 Xeon® E7-4830v2 (2.2GHz/10-core/20MB/105W) FIO Processor Kit
Eight-Core Processors
728967-L21
728969-L21
HP DL580 Gen8 Intel® Xeon® E7-4830v2 (2.2GHz/10-core/20MB/105W) Processor
Kit/S-Buy
HP DL580 Gen8 Intel® Xeon® E7-4820v2 (2.0GHz/8-core/16MB/105W) FIO Processor Kit
Six-Core Processors
728969-S21
HP DL580 Gen8 Intel® Xeon® E7-4809v2 (1.9GHz/6-core/12MB/105W) FIO Processor Kit
HP DL580 Gen8 Intel® Xeon® E7-8893v2 (3.4GHz/6-core/37.5MB/155W) FIO Processor
Kit
NOTE: A minimum of two processors are required. The system may have three and four
processors installed.
728975-L21
728973-L21
728965-L21
728961-L21
728971-L21
NOTE: HP memory from previous generation servers are not qualified or warranted with
this HP ProLiant Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for
Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM, UDIMM, and HDIMMs are all distinct memory technologies and
cannot be mixed within a server. The majority of ProLiant Gen8 servers support
LRDIMM, RDIMM and UDIMMs.
NOTE: Must select a minimum quantity of two memory kits.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
DA - 14743 North America — Version 5 — June 10, 2014
708637-B21
713981-B21
731761-B21
Page 22
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
HP Networking
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
Load Reduced DIMMs (LRDIMMS)
731765-B21
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced CAS-13
Memory Kit
HP 64GB (1x64GB) Octa Rank x4 PC3-12800L (DDR3-1866) Load Reduced CAS-11
Memory Kit
Memory Expansion Options
708643-B21
HP DL580 Gen8 12 DIMM Slots Memory Cartridge
NOTE: Up to Eight (8) memory cartridges are supported for 96 DIMM slots
NOTE: A minimum of two memory cartridges are required (one per processor).
NOTE: A minimum of two memory DIMMs are required per cartridge (minimum of four
DIMMs per server).
732411-B21
708641-B21
713985-B21
700838-B21
FlexibleLOM Adapters
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable
and can be changed from the original configuration after the server is shipped.
NOTE: For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is
required per each adapter.
HP Ethernet 1Gb 4-port 331FLR FIO Adapter
HP Ethernet 1Gb 4-port 366FLR Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ FIO Adapter
HP Ethernet 10Gb 2-port 560FLR-SFP+ FIO Adapter
HP Ethernet 10Gb 2-port 561FLR-T FIO Adapter
684208-B21
665240-B21
700752-B21
684218-B21
700700-B21
FBWC Upgrade for
embedded P830i
Controller
HP 2GB FIO Flash Backed Write Cache
758836-B21
HP 4GB FBWC FIO Kit for P-series SA
698537-B21
HP Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: 94% efficiency with support for HP Power Discovery Services.
HP 1500W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Minimum of two (2) power supplies are required.
All power supplies in a server should match. Mixing Power Supplies is not supported.
NOTE: Option Kits contain the specified power supply and a PDU IEC cable.
DA - 14743 North America — Version 5 — June 10, 2014
684532-B21
656364-B21
Page 23
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
NOTE: 1500W Power Supplies only support High Line Voltage.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
Storage Controller FBWC HP Smart Array 2GB 24in FIO Flashback Write Cache
758836-B21
NOTE: 2G Flash Backed Write Cache is required for P830i SAS Controller
Step 3: Choose Additional Factory Integratable Options
Converged Infrastructure HP OneView with iLO Advanced - Server hardware required on same purchase order
Management Software
HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
NOTE: OneView is supported in Legacy BIOS mode only.
E5Y43A
HP Insight Software
C6N36A
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below.
DA - 14743 North America — Version 5 — June 10, 2014
Page 24
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
HP Processors
HP Memory
Fifteen-Core Processors
HP DL580 Gen8 Intel® Xeon® E7-4890v2 (2.8GHz/15-core/37.5MB/155W) Processor Kit
HP DL580 Gen8 Intel® Xeon® E7-4880v2 (2.5GHz/15-core/37.5MB/130W) Processor Kit
HP DL580 Gen8 Intel® Xeon® E7-4870v2 (2.3GHz/15-core/30MB/130W) Processor Kit
HP DL580 Gen8 Intel® Xeon® E7-4870v2 (2.3GHz/15-core/30MB/130W) Processor
Kit/S-Buy
HP DL580 Gen8 Intel® Xeon® E7-8880Lv2 (2.2GHz/15-core/37.5MB/105W) Processor
Kit
Twelve-Core Processors
728955-B21
728957-B21
728959-B21
728959-S21
HP DL580 Gen8 Intel® Xeon® E7-4860v2 (2.6GHz/12-core/30MB/130W) Processor Kit
HP DL580 Gen8 Intel® Xeon® E7-4850v2 (2.3GHz/12-core/24MB/105W) Processor Kit
HP DL580 Gen8 Intel® Xeon® E7-8857v2 (3.0GHz/12-core/30MB/130W) Processor Kit
Ten-Core Processors
728963-B21
728965-B21
728961-B21
HP DL580 Gen8 Intel® Xeon® E7-8891v2 (3.2GHz/10-core/37.5MB/155W) Processor Kit
HP DL580 Gen8 Intel® Xeon® E7-4830v2 (2.2GHz/10-core/20MB/105W) Processor Kit
Eight-Core Processors
728967-B21
728969-B21
HP DL580 Gen8 Intel® Xeon® E7-4830v2 (2.2GHz/10-core/20MB/105W) Processor
Kit/S-Buy
HP DL580 Gen8 Intel® Xeon® E7-4820v2 (2.0GHz/8-core/16MB/105W) Processor Kit
Six-Core Processors
728969-S21
HP DL580 Gen8 Intel® Xeon® E7-4809v2 (1.9GHz/6-core/12MB/105W) Processor Kit
HP DL580 Gen8 Intel® Xeon® E7-8893v2 (3.4GHz/6-core/37.5MB/155W) Processor Kit
NOTE: A minimum of two processors are required. The system may have three or four
processors installed.
728975-B21
728973-B21
728953-B21
728971-B21
NOTE: HP memory from previous generation servers are not qualified or warranted with
this HP ProLiant Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for
Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM, UDIMM, and HDIMMs are all distinct memory technologies and
cannot be mixed within a server. The majority of ProLiant Gen8 servers support
LRDIMM, RDIMM and UDIMMs.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit/S-Buy
DA - 14743 North America — Version 5 — June 10, 2014
713981-B21
713981-S21
Page 25
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Core Options
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit/S-Buy
HP 4GB (1x4GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
HP 4GB (1X4GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit/S-Buy
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit/S-Buy
713985-B21
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit/S-Buy
HP 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit/S-Buy
Load Reduced DIMMs (LRDIMMS)
731761-B21
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced CAS-13
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced CAS-13
Memory Kit/S-Buy
HP 64GB (1x64GB) Octa Rank x4 PC3-12800L (DDR3-1866) Load Reduced CAS-11
Memory Kit
Memory Expansion Options
708643-B21
HP DL580 Gen8 12 DIMM Slots Memory Cartridge
NOTE: Up to Eight (8) memory cartridges are supported for 96 DIMM slots
NOTE: A minimum of two memory cartridges are required (one per processor).
NOTE: A minimum of two memory DIMMs are required per cartridge (minimum of four
DIMMs per server).
732411-B21
HP Optical Drives
HP Mobile USB Non Leaded System DVD RW Drive
701498-B21
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
DA - 14743 North America — Version 5 — June 10, 2014
713985-S21
708637-B21
708637-S21
731765-B21
731765-S21
731761-S21
708641-B21
708641-S21
708643-S21
700838-B21
Page 26
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Core Options
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard
Drive
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard
Drive/S-Buy
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive/S-Buy
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive/S-Buy
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive/S-Buy
718162-B21
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive/S-Buy
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
652611-B21
652611-S21
652605-B21
652605-S21
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/12244_na/12244_na.html
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
652749-B21
652745-B21
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
HP 80GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State
Drives
717965-B21
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 600GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
717973-B21
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
691868-B21
DA - 14743 North America — Version 5 — June 10, 2014
718162-S21
652589-B21
652589-S21
652583-B21
652583-S21
652572-B21
652564-B21
652564-S21
734360-B21
717971-B21
739898-B21
739888-B21
717969-B21
691866-B21
Page 27
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Core Options
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
12G SAS Enterprise Performance and Mainstream Solid State Drives
691864-B21
HP 800GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
HP 400GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
HP 200GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
12G SAS VE SFF (2.5-inch) SC EV Solid State Drives
741159-B21
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html
Hard Drive Option Kits
762263-B21
HP ProLiant DL580 Gen8 5 Small Form Factor Drive Backplane Cage Kit
HP SFF Gen8 Hard Drive Blank Kit
HP DL580 Gen8 SAS Cable Kit
NOTE: This cable is required when ordering one of these Smart Array Controllers for a
PCIe slot.
HP Smart Array P830/4GB FBWC 12Gb 2-ports Int SAS Controller
HP Smart Array P430/4GB FBWC 12Gb 1-port Int SAS Controller
HP Smart Array P430/2GB FBWC 12Gb 1-port Int SAS Controller
739405-B21
666987-B21
748916-B21
DA - 14743 North America — Version 5 — June 10, 2014
691862-B21
741155-B21
741151-B21
741146-B21
741142-B21
741138-B21
762261-B21
698533-B21
698530-B21
698529-B21
Page 28
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Core Options
HP Networking
Gigabit Ethernet Adapters
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
HP Ethernet 1Gb 2-port 332T Adapter
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
HP Ethernet 10Gb 2-port 530SFP Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 10Gb 2-port 530T Adapter
HP FlexFabric 10Gb 2P 533FLR-T Adapter
HP Ethernet 10Gb 2-port 561T Adapter
FlexibleLOM Adapters
647594-B21
652497-B21
615732-B21
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 366FLR Adapter
HP FlexFabric 10Gb 2P 533FLR-T Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
NOTE: This adapter does not support FCOE Boot from SAN functionality on VMWare.
629135-B21
665240-B21
700759-B21
700751-B21
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
NOTE: Both Legacy and UEFI mode are supported
665243-B21
700699-B21
652503-B21
665249-B21
656596-B21
700759-B21
716591-B21
NOTE: Wake-On-LAN not supported with FlexLOMs on DL580 Gen8
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
HP Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: 94% efficiency with support for HP Power Discovery Services.
HP 1500W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: All power supplies in a server should match. Mixing Power Supplies is not
supported.
NOTE: Option Kits contain specified power supply and PDU IEC cable.
NOTE: 1500W Power Supplies only support High Line Voltage.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
DA - 14743 North America — Version 5 — June 10, 2014
684532-B21
656364-B21
Page 29
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Core Options
HP Graphic Options
Auxiliary Power Cables
NOTE: Up to five cards are supported on the DL580 Gen8. Supporting multiple number
of cards on the DL580 Gen8 blocks some active IO cards as follows due to space
constraints:
For 2P config: Max of 2 double-wide cards are supported on slot 6 and slot 9 (slot 8 is
blocked)
For 3P config: Max of 3 double-wide cards are supported on slot 3, slot 6 and slot 9 (slot
5 and slot 8 are blocked)
For 4P config: Max of 5 double wide cards are supported on Slot 1, Slot 3, Slot 2, Slot 6
and Slot 9 (slot 5 and slot 8 are blocked).
NOTE: HP DL580/DL585/DL980 Power Cable Kit (631660-B21) is required for Graphics
cards. Each cable kit has two 8-pin connectors (one 150W and other 225W) and can
support up to two cards. For three cards, two cable kits are required. For five cards,
three cable kits are required. The cards pull up to 75W of power from the IO slot and the
rest from the auxiliary power connectors.
NOTE: Both UEFI mode and Legacy Mode are supported.
NVIDIA Quadro K6000 PCIe Graphics Adptr
NOTE: Supported at Gen2 speeds
730874-B21
NVIDIA Tesla K40C 12 GB Module
NOTE: Supported at Gen2 speeds
753960-B21
NVIDIA GRID K2 RAF PCIe GPU Kit
NOTE: Only three cards are supported with MS Windows Server 2012 R2
NOTE: The DL580 Gen8 supports six auxiliary power connectors
753958-B21
HP DL580/DL585/DL980 Power Cable Kit
NOTE: Order with GPGPUs for providing additional power to the IO cards.
631660-B21
DA - 14743 North America — Version 5 — June 10, 2014
Page 30
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
HP Insight Software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Integrated Lights-Out (iLO) Advanced for ProLiant
HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single Server
License
HP iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates
NOTE: For additional license options please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/14276_na/14276_na.html
NOTE: For more information, visit: http://www.hp.com/go/ilo
Converged Infrastructure HP OneView
Management Software
HP OneView with iLO Advanced
HP OneView Media Kit Phys No Lic
HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView without iLO Advanced
HP OneView w/o iLO Adv incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView w/o iLO Adv inc 3yr 24x7 Supp Flex Qty E-LTU
NOTE: OneView is supported in Legacy BIOS mode only
Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14621_na/14621_na.html
DA - 14743 North America — Version 5 — June 10, 2014
C6N27A
BD883A
C6N31A
512485-B21
BD505A
E5Y37A
E5Y34A
E5Y35AAE
E5Y38A
E5Y39AAE
Page 31
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Additional Options
HP I/O Accelerator
Options
Second Generation Accelerators
HP Storage Controllers
SAS Controllers
HP 365GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers
HP 785GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers
HP 1205GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers
HP 2410GB Multi Level Cell G2 PCIe ioDrive2 Duo for ProLiant Servers
HP 3TB G2 FH/HL PCIe ioDrive2 IO Accelerator for ProLiant Servers
NOTE: Both Legacy and UEFI BIOS modes are supported. Please see the QuickSpecs for
Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13587_na/13587_na.html
673642-B21
673644-B21
673646-B21
673648-B21
721458-B21
Smart Array P430 Controller
HP Smart Array P430/2GB FBWC 12Gb 1-port Int SAS Controller
HP Smart Array P430/4GB FBWC 12Gb 1-port Int SAS Controller
Smart Array P431 Controller
698529-B21
698530-B21
HP Smart Array P431/2GB FBWC 12Gb 2-ports Ext SAS Controller
HP Smart Array P431/4GB FBWC 12Gb 2-ports Ext SAS Controller
Smart Array P830 Controller
698531-B21
698532-B21
HP Smart Array P830/4GB FBWC 12Gb 2-ports Int SAS Controller
Optional Upgrades
698533-B21
HP 4GB Flash Backed Write Cache FIO Kit for P-series Smart Array Controllers
HP Smart Array 2GB 24in FIO Flashback Write Cache
HP SmartCache No Media 24x7 Technical Support 1 Svr License
HP SmartCache No Media 24x7 Technical Support Flexible License
HP SmartCache No Media 24x7 Technical Support Electronic License
NOTE: A maximum of four HP Smart Array Controllers (including embedded controller)
can be installed
NOTE: For more information about HP SmartCache, go to www.hp.com/go/smartcache
NOTE: Both Legacy and UEFI modes are supported
698537-B21
758836-B21
D7S26A
D7S27A
D7S27AAE
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14624_na/14624_na.html
(Smart Array P430 Controller)
http://h18000.www1.hp.com/products/quickspecs/14625_na/14625_na.html
(Smart Array P431 Controller)
http://h18000.www1.hp.com/products/quickspecs/xxxxx_na/xxxxx_na.html
(Smart Array P830 Controller)
http://h18000.www1.hp.com/products/quickspecs/14532_na/14532_na.html
(SmartCache)
DA - 14743 North America — Version 5 — June 10, 2014
Page 32
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Additional Options
HP Secure Encryption
HP Secure Encryption No Media E-LTU per Drive
HP Secure Encryption No Media Flexible License per Drive
NOTE: HP Secure Encryption is supported on the HP Smart Array P830, P430 and P431
as an option. HP Secure Encryption licensing is based on the number of physical drives
requiring encryption.
NOTE: For more information about HP Secure Encryption, go to
www.hp.com/go/hpsecureencryption
HP Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
http://www.hp.com/go/tape. For hardware and software compatibility of HP tape
backup products see: http://www.hp.com/storage/SPOCK and www.hp.com/go/ebs.
NOTE: For Internal drives to be connected to DL servers please make sure that you
order rack mount kit as well.
HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit
HP StoreEver LTO-6 Ultrium 6650 SAS Internal Tape Drive
HP StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive
HP StoreEver LTO-6 Ultrium 6250 Internal Tape Drive
HP StoreEver LTO-6 Ultrium 6250 External Tape Drive
HP StoreEver 1/8 G2 LTO-6 Ultrium 6250 FC Tape Autoloader
D8S85AAE
D8S84A
C0L99A
EH963A
EH964A
EH969A
EH970A
C0H19A
HP Tape Storage Systems HP StoreEver MSL6480
HP StoreEver MSL6480 Scalable Base Module
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14604_na/14604_na.html
HP Disk Backup
NOTE: For the complete range of RDX drives and media see:
http://www.hp.com/go/rdx. For hardware and software compatibility of HP disk backup
products see: http://www.hp.com/storage/SPOCK.
NOTE: For Internal drives to be connected to DL servers please make sure that you
order rack mount kit as well.
HP RDX320 USB3.0 External Disk Backup System
HP RDX500 USB3.0 Internal Disk Backup System
HP RDX500 USB3.0 External Disk Backup System
HP RDX1000 USB3.0 Internal Disk Backup System
HP RDX1000 USB3.0 External Disk Backup System
HP RDX 2TB USB3.0 Internal Disk Backup System
HP RDX 2TB USB3.0 External Disk Backup System
DA - 14743 North America — Version 5 — June 10, 2014
QU625A
B7B63A
B7B64A
B7B66A
B7B67A
B7B69A
E7X52A
E7X53A
Page 33
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Additional Options
HP Disk Storage Systems Disk Enclosures
HP D2600 w/12 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 48TB Bundle
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13404_na/13404_na.html
HP Storage Options
E7W32A
Storage Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and
Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
QLogic Fibre Channel HBAs
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1000Q 16GB 1-port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1000Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter
Emulex Fibre Channel HBAs
AK344A
AJ764A
QW971A
QW972A
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1000E 16GB 1-port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1000E 16GB 2-port PCIe Fibre Channel Host Bus Adapter
NOTE: Both Legacy and UEFI mode is supported.
AJ762B
AJ763B
C8R38A
C8R39A
HP Uninterruptible Power HP Rack-mountable UPS
Systems
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U NA Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14059_na/14059_na.html
HP R/T3000 G2 Uninterruptible Power System (UPS)
AF469A
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14058_na/14058_na.html
R5000 Uninterruptible Power System (UPS)
AF466A
AF467A
HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14109_na/14109_na.html
R7000 Uninterruptible Power System (UPS)
AF460A
HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System
HP R5KVA and R7KVA 3U Extended Runtime Module
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14110_na/14110_na.html
AF462A
AF464A
DA - 14743 North America — Version 5 — June 10, 2014
Page 34
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Additional Options
HP Rackmountable 3 Phase Uninterruptible Power Systems (UPS R8000/3 and
R12000/3)
HP R8000/3 8000kVA Three Phase NA 6U Rackmount Uninterruptible Power System
HP R12000/3 12000VA Three Phase NA 6U Rackmount Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12857_na/12857_na.html
NOTE: For additional information on HP Uninterruptible Power Systems please go to:
www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com.
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
HP Basic Power
HP Basic Power Distribution Unit: 1U/0U Version
Distribution Units (pPDU) HP 1.9kVA 120 Volt L5-20 Input (12xNEMA 5-20R) NA/JP Basic PDU
HP 3.6kVA 200-240 Volt Detachable C20 Input ( 12xC13) WW Basic PDU
HP Basic Power Distribution Unit: Half Height Version
AF431A
AF429A
H5M54A
H5M56A
HP 2.8kVA 120 Volt L5-30 Input (18xNEMA 5-20R) NA/JP Basic PDU
HP 3.6kVA 200-240 Volt Detachable C20 Input (18xC13) WW Basic PDU
HP 4.9kVA 208 Volt L6-30 Input (20xC13) NA/JP Basic PDU
HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13) NA/JP Basic PDU
HP Basic Power Distribution Unit: Mid Height Version
H5M55A
H5M57A
H5M58A
H5M61A
HP 4.9kVA 208 Volt L6-30 Input (24xC13/6xC19) NA/JP Basic PDU
HP 8.3kVA 208 Volt CS8265C Input (30xC13/6xC19) NA/JP Basic PDU
HP Hardwired 200-240 Volt Input (30xC13/6xC19) WW Basic PDU
HP 5.7kVA 208 Volt L21-20 3-Phase Input (24xC13/3xNEMA 5-20R) NA/JP Basic PDU
HP 8.6kVA 208 Volt L21-30 3-Phase Input (24xC13/3xC19/3xNEMA 5-20R) NA/JP Basic
PDU
HP 8.6kVA 208 Volt L15-30 3-Phase Input (24xC13/6xC19) NA/JP Basic PDU
HP Basic Power Distribution Unit: Full Height Version
H5M59A
H5M60A
H5M75A
H5M63A
H5M64A
HP 11kVA 400 Volt Three Phase 42 Outlet NA Basic Power Distribution Unit
HP Basic Power Distribution Unit: 480/277 Volt Version
H5M67A
HP 13.2kVA 480 Volt IEC309 30A 3-Phase Input (15 Outlet) NA Basic PDU
HP 19.9kVA 480 Volt IEC309 30A 3-Phase Input (30 Outlet) NA Basic PDU
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14557_na/14557_na.html
NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP
PDUs and additional information please visit: www.hp.com/go/rackandpower.
H3X07A
H3X08A
H3X09A
DA - 14743 North America — Version 5 — June 10, 2014
H5M62A
Page 35
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Additional Options
HP Remote Monitoring
HP Remote Monitored Power Distribution Unit: 1U Version
Power Distribution Units HP 2.8kVA 120 Volt L5-30 Input (12xNEMA 5-20R)NA/JP Monitored PDU
(mPDU)
HP 3.6kVA 200-240 Volt Detachable C20 Input (12xC13) WW Monitored PDU
HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU
HP Remote Monitored Power Distribution Unit: Half Height Version
HP Intelligent Power
Distribution Units (iPDU)
D9N43A
D9N46A
D9N44A
HP 3.6kVA 200-240 Volt Detachable C20 Input (16xC13) WW Monitored PDU
HP Remote Monitored Power Distribution Unit: Mid Height Version
D9N45A
HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Monitored PDU
HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13/3xC19) NA/JP Monitored PDU
HP 5.7kVA 208 Volt L21-20 3-Phase Input (18xC13/3xNEMA 5-20R) NA/JP Monitored
PDU
HP 8.6kVA 208 Volt L21-30 3-Phase Input (20xC13/3xC19/3xNEMA 5-20R) NA/JP
Monitored PDU
HP Remote Monitored Power Distribution Unit: Full Height Version
D9N47A
D9N51A
D9N52A
HP 8.3kVA 208 Volt CS8265C Input (30xC13/3xC19) NA Monitored PDU
HP 14.4kVA 208 Volt CS8365C 3-Phase Input (12xC13/12xC19)NA Monitored PDU
HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (30xC13/3xC19) NA Monitored PDU
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (24xC13/3xC19) NA/JP Monitored PDU
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (12xC13/12xC19) NA/JP Monitored PDU
HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (12xC13/12xC19) NA Monitored PDU
HP 19.9kVA 480 Volt 3-Phase (30 Outlet) NA Monitored PDU
HP Environmental Sensor for Remote Monitored PDUs
D9N49A
D9N58A
D9N61A
D9N54A
D9N59A
D9N62A
D9N63A
HP Environmental Sensor for Remote Monitored PDUs
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14669_na/14669_na.html
E2D53A
D9N53A
iPDU Core Units
HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit
HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit
HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power Distribution Unit
HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power Distribution Unit
HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power Distribution Unit
HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution
Unit
HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution
Unit
iPDU Kits with Standard Extension Bars
DA - 14743 North America — Version 5 — June 10, 2014
AF520A
AF521A
AF522A
AF533A
AF523A
AF900A
AF902A
AF901A
AF535A
AF537A
Page 36
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Additional Options
HP Rack Options
HP 4.9kVA 24A Single Phase NA/JP Intelligent Modular Power Distribution Kit
HP 8.6kVA 24A Three Phase NA/JP Intelligent Modular Power Distribution Kit
iPDU Extension Bars
AF531A
AF532A
HP 5xC13 Intelligent PDU Extension Bar G2 Kit
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13650_na/13650_na.html
AF547A
AF528A
HP Location Discovery Services
HP 36U Location Discovery Kit
HP 42U Location Discovery Kit
HP 47U Location Discovery Kit
HP TFT7600 G2 KVM Console and Monitor (TFT7600 G2)
BW945A
BW946A
BW947A
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13731_na/13731_na.html
HP Server Console Switches
AZ870A
AZ885A
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
HP TAA 0x2x16xKVM Server Console G2 Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html
HP Server Console Switch G2 with Virtual Media & CAC
AF616A
AF617A
AF626A
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
HP KVM CAT5 1-pack USB Interface Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_na/13475_na.html
HP IP Console Switch G2 with Virtual Media & CAC
AF618A
AF619A
336047-B21
HP 1x4 USB/PS2 KVM Console Switch
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_na/13474_na.html
AF611A
AF620A
AF621A
AF622A
DA - 14743 North America — Version 5 — June 10, 2014
Page 37
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Additional Options
HP USB and SD Options
HP Flash Media Kits for USB Drives
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB SD Enterprise Mainstream Flash Media Kit
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP 32GB microSD Enterprise Mainstream Flash Media Kit
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13971_na/13971_na.html
HP Care Pack Services
Proactive Care
NOTE: Collaborative Support plus Proactive services delivered by the onshore, local
language Advanced Solution Center (ASC), end-to-end case ownership from a Technical
Solution Specialists and Technical Account Manager who remotely delivers
firmware/software revision management, proactive scans and incident trend reports.
Recommended for customers running a virtualized infrastructure and/or customers
who desire an enhanced call support experience.
HP 3 year 4 hour 24x7 ProLiant DL58x Proactive Care Service
HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant DL58x Proactive Care
Service
HP 3 year 6 hour Call To Repair 24x7 ProLiant DL58x Proactive Care Service
HP 3 year 6 hour Call To Repair 24x7 withDefective Media Retention ProLiant DL58x
Proactive Care SVC
Proactive Care Personalized Support - Environmental Option
NOTE: To add an onsite Account Support Manager (ASM) to Proactive Care. ASM is an
assigned resource who delivers support planning and brings technical expertise and
best practices advices for the customer's environment.
HP 3 year ISS ProactiveCare Personalized Support
Installation Services
NOTE: Reduce the time required to get your system up and running and help minimize
disruptions to your business.
HP Install ProLiant DL58x Service
HP Startup ProLiant DL58x Service
HP Installation and Startup for Insight Control Software
HP Startup HP Systems Insight Manager Service
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack
DA - 14743 North America — Version 5 — June 10, 2014
726113-B21
737953-B21
700139-B21
U2Z68E
U2Z71E
U2Z74E
U2Z77E
U6W98E
U4617E
U4618E
UF369E
UA041E
Page 38
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Memory
HP SmartMemory
New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you have true HP
Qualified Memory in your HP ProLiant Gen8 server. With HP SmartMemory your new HP ProLiant server can take advantage of
additional Gen8 enhancements in performance, durability and future manageability support through HP Active Health System.
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Memory Sub-system Architecture
As shown in the figure above, memory cartridge to processor association as follows:
Memory cartridges installed without a corresponding processor are not utilized:
Processor 1 corresponds to memory cartridges 1 and 2.
Processor 2 corresponds to memory cartridges 3 and 4.
Processor 3 corresponds to memory cartridges 5 and 6.
NOTE: Memory cartridges 5 and 6 are not recognized if processor 3 is not installed.
Processor 4 corresponds to memory cartridges 7 and 8.
NOTE: Memory cartridges 7 and 8 are not recognized if processor 4 is not installed.
Each memory cartridge contains 12 DIMM slots as shown in figure below:
DA - 14743 North America — Version 5 — June 10, 2014
Page 39
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Memory
The memory subsystem in this server is divided into channels. Each processor supports eight channels, and each channel supports
three DIMM slots, as shown in the table below. White DIMM slots denote the first slot of a channel (Ch 4A, Ch 9B, Ch 1C, Ch 12D...).
Channel
Population order
Slot number
A
4
1
E
5
J
6
2
B
9
F
8
K
7
3
C
1
G
2
L
3
4
D
12
H
11
M
10
The server can operate in independent channel mode (performance) or combined channel mode (lockstep). Lockstep mode improves
the system reliability and availability. If running with RDIMM (built with x4 DRAM devices), the system can survive the complete failure
of two DRAM devices (DDDC). Running in independent mode, the server can only survive the complete failure of a single DRAM device
(SDDC).
Independent channel mode (Performance mode):
The server supports the following DIMM speeds as shown below in the table.
DIMM type
DIMM rank
Voltage
1 DIMM per channel 2 DIMMs per channel 3 DIMMs per channel
RDIMM
Single-rank (4 GB)
LV
1333
1066
1066
RDIMM
Single-rank (4 GB)
STD
1333
1333
1066
RDIMM
Single-rank (8 GB)
LV
1333
1066
1066
RDIMM
Single rank (8 GB)
STD
1333
1333
1066
RDIMM
Dual-rank (16 GB)
LV
1333
1066
1066
RDIMM
Dual-rank (16 GB)
STD
1333
1333
1066
LRDIMM
Quad-rank (32GB)
STD
1333
1333
1333
NOTE:
Depending on the number of DIMMs installed, whether LRDIMMs or RDIMMs are installed, and whether the DIMM is operating and
standard or low voltage, the memory clock speed can be reduced to 1333 or 1066 MT/s.
Lockstep mode:
The server supports the following DIMM speeds as shown below in the table.
DA - 14743 North America — Version 5 — June 10, 2014
Page 40
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Memory
DIMM type
RDIMM
RDIMM
RDIMM
RDIMM
RDIMM
RDIMM
LRDIMM
NOTE:
DIMM rank
Single-rank (4 GB)
Single-rank (4 GB)
Single-rank (8 GB)
Single rank (8 GB)
Dual-rank (16 GB)
Dual-rank (16 GB)
Quad-rank (32GB)
Voltage
LV
STD
LV
STD
LV
STD
STD
1 DIMM per channel 2 DIMMs per channel 3 DIMMs per channel
1333
1066
1066
1333
1333
1066
1333
1066
1066
1333
1333
1066
1333
1066
1066
1333
1333
1066
1600
1600
1333
Depending on the number of DIMMs installed, whether LRDIMMs or RDIMMs are installed, and whether the DIMM is operating and
standard or low voltage, the memory clock speed can be reduced to 1333 or 1066 MT/s.
DIMM Classification and Identification
Memory Population Guidelines
To maximize performance, install two memory cartridges per processor and balance the total memory capacity between all
installed processors.
When multiple processors are installed, HP recommends installing the DIMMs in sequential alphabetical order: 4A, 9B, 1C, 12D,
and so on.
LRDIMMs support higher densities than single- and dual-rank RDIMMs, and higher speeds than quad-rank RDIMMs. This support
enables you to install more high capacity DIMMs, resulting in higher system capacities and higher bandwidth.
Do not mix LRDIMMs with any other DIMM type (RDIMM, LVDIMM).
RDIMM population is limited to a maximum of eight logical ranks per channel. Therefore, only two quad rank RDIMMs are
supported per channel. If there are more than eight physical ranks per channel, LRDIMMs rank multiplication provides support
for three DIMMs per channel.
Lockstep mode requires specific population requirements. See lock-step configuration below for more information.
NOTE: UDIMMs are not supported. This server does not support mixing LRDIMMs, RDIMMs, or UDIMMs. Attempting to mix any
combination of these DIMMs can cause the server to halt during BIOS initialization.
For detailed memory configuration rules and guidelines, use the Online DDR3 Memory Configuration Tool on the HP website
(http://www.hp.com/go/ddr3memory-configurator).
Online Sparing Configuration Guidelines
DA - 14743 North America — Version 5 — June 10, 2014
Page 41
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Memory
Online spare memory provides protection against degraded DIMMs by reducing the likelihood of uncorrected memory errors. This
protection is available without any operating system support.
Online spare memory protection dedicates one rank of each memory channel for use as spare memory. The remaining ranks are
available for OS and application use. If correctable memory errors occur at a rate higher than a specific threshold on any of the nonspare ranks, the server automatically copies the memory contents of the degraded rank to the online spare rank. The server then
deactivates the failing rank and automatically switches over to the online spare rank.
For Online Spare memory mode configurations, observe the following guidelines:
Observe the general DIMM slot population guidelines.
Each channel must have a valid online spare configuration.
Each channel can have a different valid online spare configuration.
Each populated channel must have a spare rank.
A single dual-rank DIMM is not a valid configuration.
LRDIMMs are treated as dual-rank DIMMs.
HP Memory
NOTE: HP memory from previous generation servers are not qualified or warranted with
this HP ProLiant Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for
Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM, UDIMM, and HDIMMs are all distinct memory technologies and
cannot be mixed within a server. The majority of ProLiant Gen8 servers support
LRDIMM, RDIMM and UDIMMs.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory
Kit
Load Reduced DIMMs (LRDIMMS)
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced CAS-13
Memory Kit
HP 64GB (1x64GB) Octa Rank x4 PC3-12800L (DDR3-1866) Load Reduced CAS-11
Memory Kit
Memory Expansion Options
HP DL580 Gen8 12 DIMM Slots Memory Cartridge
DA - 14743 North America — Version 5 — June 10, 2014
713981-B21
713985-B21
708637-B21
731765-B21
731761-B21
708641-B21
708643-B21
700838-B21
732411-B21
Page 42
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Memory
NOTE: A minimum of two memory cartridges are required (one per processor).
NOTE: A minimum of two memory DIMMs are required per cartridge (minimum of four
DIMMs per server).
DA - 14743 North America — Version 5 — June 10, 2014
Page 43
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Storage
1-10
Ten (10) SFF Hot-plug HDD/SSD drive bays
NOTE: Drives installed in bays 6-10 require the optional
SAS backplane kit.
Maximum Internal Storage
Hot Plug SFF SAS
12TB
10 x 1.2TB
Hot Plug SFF SAS SSD
Hot Plug SFF SATA SSD
16TB
8TB
10 x 1.6TB
10 x 800GB
DA - 14743 North America — Version 5 — June 10, 2014
Page 44
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Input Requirements
(per power supply)
BTU Rating
Power Specifications
6.88" x 17.48" x 29" (17.5cm x 44.4cm x 73.6cm)
Maximum
116.56.0 lb (52.87 kg)
(all hard drives, power
supplies, DIMMs and
processors installed)
Minimum
70.94 lb (32.18 kg)
(one hard drive, two power
supplies, four DIMMs, and
two processors installed)
Rated Line Voltage
100 - 120 VAC (1200W PS only)
200 - 240 VAC (1200W & 1500W PS)
Rated Input Current
9.2A (100 VAC), 6.6A (200 VAC) - 1200W PS8.3A
(200 VAC) - 1500W PS
Rated Input Frequency
50 to 60 Hz
Rated Input Power
1000 W (120 VAC), 1320 W (230VAC)
- 1200W PS
1652 W (at 230 VAC) - 1500W PS
Maximum
3408 BTU/hr (120 VAC), 4500 BTU/hr (at 230 VAC)
- 1200W PS5637 BTU/hr (230 VAC) - 1500W PS
NOTE: To review typical system power ratings use the HP Power Advisor
which is available online located at url: www.hp.com/go/proliant-energyefficient or www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL580 G7
- Follow the instructions of the next screens.
Power Supply Output (per Rated Steady-State Power 800 W (100 VAC low line),900 W (120 VAC low
and Maximum Peak Power line), 1200W (200 - 240 VAC) for 1200W PS
power supply)
1500W (200 - 240V) for 1500W PS
System Inlet
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m (1.8°F
Temperature
per every 1000 ft) above sea level to a maximum
of 3048 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-40° to 70°C (-40° to 158°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
Operating
10% to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non(non-condensing)
condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, noncondensing.
DA - 14743 North America — Version 5 — June 10, 2014
Page 45
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Technical Specifications
Altitude
Operating
Non-operating
HP Smart Array P830i
Emissions Classification
(EMC)
FCC Rating
Dimensions
Embedded
3048 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; GB9254; K22;K24; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
Disk Drive and Enclosure 12 Gb/s SAS, 6 Gb/s SAS & SATA
Interface - Transfer rate
SAS Connectors
2 internal x8 Mini-SAS double-wide internal
Cache Memory Speed
DDR2-1866MHz with 72-bit wide bus at 14.9 GB/s (4 GiBytes Cache Module)
SAS Speed
12Gb/s per physical link
Cache Memory
FBWC cache is required. 2GB is included with BTO models. For CTO, 2GB or 4GB
FBWC cache is required.
Logical Drives Supported Up to 64 logical volumes
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID Support
RAID 6, 60 (Advanced Data Guarding)
RAID 5, 50 (Distributed Data Guarding)
NOTE: A minimum of 512 MB cache is required to enable RAID 5, 50, 6, 60
RAID 10 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)
DA - 14743 North America — Version 5 — June 10, 2014
Page 46
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Technical Specifications
HP Ethernet 1Gb 4-port
331FLR Adapter
HP Flexible Network
Technology
HP Flexible Network Technology consists of replaceable network solutions to
meet customer requirements now and in the future.
Network Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
Data Transfer Method
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x
IEEE 802.3ad 1000Base-TX
IEEE 802.3az
IEEE 1588
802.1as
IEEE 802.1q 100Base-TX
PCI-Express 2.0 x4
Controller
BCM5719
Network Transfer Rate
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Full-Duplex) 2000 Mb/s
RJ-45
Connector
Cable Support
HP FlexFabric 10Gb 2-port HP Flexible Network
534FLR-SFP+ Adapter
Technology
10Base-T
100Base-TX
1000Base-TX
Categories 3, 4, or 5 UTP; up to 328 ft (100 m)
Category 5 or higher UTP; up to 328 ft (100 m)
Category 5 or higher UTP; up to 328 ft (100 m)
HP Flexible Network Technology consists of replaceable network solutions to
meet customer requirements now and in the future.
Network Interface
IEEE 802.3 SFP+ (SX, SR & LR)
Compatibility
Data Transfer Method
802.3, 802.3ae, 802.3x, 802.2x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb,
802.1Qbg, 802.1ax
PCI-Express 2.0 x8
Controller
Broadcom BCM57810S chipset
Network Transfer Rate
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth.
Two SFP+
Connector
Cable Support
Maximum distances for CAT6 cable are 30 meters (98 feet).
Maximum distances for CAT6a are 100 meters (328 feet).
DA - 14743 North America — Version 5 — June 10, 2014
Page 47
QuickSpecs
HP ProLiant DL580 Generation 8 (Gen8)
Technical Specifications
HP Ethernet 10Gb 2-port
560FLR-SFP+ Adapter
HP Flexible Network
Technology
HP Flexible Network Technology consists of replaceable network solutions to
meet customer requirements now and in the future.
Network Interface
SFP+ for Direct Attach Cable copper or fiber
Compatibility
802.3, 802.1ab, 802.3x, 802.3ad, 802.1p/ 802.1q, 802.3ae, 802.1Qau
Data Transfer Method
PCI-Express 2.0 x8
Controller
Intel® 82599 Controller
Network Transfer Rate
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth.
Two SFP+
Connector
Cable Support
Environment-friendly
Products and Approach
10Base-T
100Base-TX
1000Base-TX
Categories 3, 4, or 5 UTP; up to 328 ft (100 m)
Category 5 or higher UTP; up to 328 ft (100 m)
Category 5 or higher UTP; up to 328 ft (100 m)
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
and Recycling
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Unix is a registered trademark of The Open Group.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14743 North America — Version 5 — June 10, 2014
Page 48
Download PDF