b_tech_cart_19rack_tc15.qxd (Page 1)

BRETFORD BASICS ™
MOBILE 19" RACK MOUNT PRESENTATION CART
MOBILE 19" RACK MOUNT
PRESENTATION CART
TC15 features a locking lower cabinet with 19"
rack mount and front and rear door for easy
access to cords. Supports a projector, laptop,
document camera and other equipment for
presentations.
Made In The USA
TC15-BK
FEATURES
• Lower cabinet features a 19" rack mount for DVD players and other electronics while top shelf and two pull out shelves support a data
projector, notebook computer, and document camera. Ideal for use during multimedia presentations.
• Pull-out shelves located on both the left and right sides nearly double the work surface! Each shelf is 14"d x 20-3/4"w and have 3-1/4"
clearance below the top shelf. Pull out at a 37" standing height.
• Locking lower cabinet includes a 19" rack mount system with 16 unit spacing and two rack mounted accessory shelves. Front and rear locking
doors provide easy access to cords and controls. Cabinet may be equipped with a 4-outlet electrical unit, electrical unit, standard on TC15FF
models.
• Heavy-duty 1" square tubular legs with “W” bracket shelf design for maximum strength.
• All-steel construction with die pressed shelves.
• 4" Quiet-Glide stem casters, two are locking. Each caster is load rated to 115 lbs.
• TC15FF includes a surge protected, 4-outlet electrical assembly with on/off switch and 20’ grounded power cord. Electrical unit mounts
inside the lower cabinet.
• TC15 series carts feature a steel content with 25% to 35% post-consumer recycled steel and are recyclable at the end of the product life cycle.
TC15 series carts also comply with the GREENGUARD Environmental Institute’s GREENGUARD Children & Schools Indoor Air Quality
standards contributing to points toward Leadership in Energy and Environmental Design (LEED) Certification.
• Made in the USA.
DIMENSIONS
MADE IN THE USA
TC15 Overall: 32"w x 24"d x 42"h
TC series carts are made at Bretford’s Chicago area manufacturing
Storage Cabinet: 30"w x 23"d x 27"h
facility using union labor.
Storage Cabinet Doors: 21-3/4"w x 25"h
Pull Out Shelves: 14"d x 20-3/4"w
ENVIRONMENTAL SPECIFICATIONS
Pull Out Shelves to Floor: 37"h
The TC15 series carts are constructed using “prime” steel which has a
Pull Out Shelves Clearance to Top Shelf: 3-1/4"h
25% to 35% post-consumer recycled content and is recyclable at the
end of the product life cycle. TC15 series carts are certified to
PULL OUT SHELF WEIGHT CAPACITY
GREENGUARD Children & Schools Indoor Air Quality standards.
Shelf Load: 20 lbs.
NOTE: The pull out shelves are designed for use with a notebook
CART ASSEMBLY SPECIFICATIONS
computer, projector and like items. Objects over than 20 lbs should
TC15 19" Rack Mount Technology Carts has one (1) 32"w x 24"d, 18-
not be used on the pull out shelves as it may cause a tip hazard when
gauge steel top shelf with 20-gauge steel stiffener, one (1) 32"w x
shelves are extended and potentially cause deformation of the glides.
24"d middle shelf, and one (1) 32"w x 24"d bottom shelf. All shelves
have open corners so the sides of the shelf do not connect. The leg
COLOR & FINISH
assembly fits flush to each shelf and attach with a 13-gauge steel “W”
Black (-BK) powder paint
bracket design that interlocks the legs and shelves for maximum
strength and stability. Leg assemblies are 1" square tubular 18-gauge
WEIGHT, FREIGHT CLASS AND UPC CODE
steel and run the height of the cart and form the corners of the lower
TC15-BK:
154 lbs., Freight class 70
cabinet. Door assemblies allow access to both sides of the cabinet
0 96633 27650 9
and lock using a key lock, four (4) keys included. Cabinet side panels
158 lbs., Freight class 70
and doors are perforated 20-gauge steel to ventilate equipment.
0 96633 27651 6
Cabinet interior is 23"w x 30"d, cabinet doors are 21-3/4"w x 25"h. A
TC15FF-BK:
Both ship ready to assemble in one (1) carton pack and are available
19" rack mount assembly is installed inside the cabinet with 16 unit
to ship via LTL Truck.
spacing for rack mount equipment. Two (2) 19" rack compatible
accessory shelves are included. Each lower leg has a hard plastic
CARTON DIMENSIONS
caster insert mounted in the bottom of the tube. Includes two (2)
TC15 & TC15FF: 40"l x 33"w x 10-1/2"d
14"d x 20-3/4"w, 18-gauge steel pull-out shelves that extend off the
left and right sides. Shelves are set at 37" standing height and there
ACCESSORIES
is 3-1/4" clearance under the top shelf when shelves are pushed in.
CFPS - 4 Outlet Electrical Unit (inc. on FF models) - 0 96633 10076 7
Model TC15FF includes a surge protected 4-outlet electrical assembly
UCSE10 - 10 Outlet Electrical Unit - 0 96633 11038 4
with on/off switch and 20' 3-wire cord and two (2) 3⁄16" diameter
machine screws with nuts for attaching unit to the inner cabinet.
Stem casters are mar-resistant, hard black rubber, 4" in diameter.
Each caster assembly has ball bearing swivel capabilities, steel
construction and is load rated for 115 lbs each. Two (2) have locking
brakes. Finished in Black (-BK) powder paint. Ships knocked down
(KD) via LTL truck class 70.
19" rack mounted equipment. Shown with 19" rack
mounted drawer, not sold by Bretford.
11000 SEYMOUR AVENUE
FRANKLIN PARK, ILLINOIS 60131 USA
TOLL FREE PHONE 800-521-9614
PHONE 847-678-2545
TOLL FREE FAX 800-343-1779
FAX 847-678-0852
WWW.BRETFORD.COM
©2002 Bretford / b_tech_cart_19rack_tc15 / 03.10
Locking front and rear doors provide easy access to
Download PDF