MTP6000 SERIES
ACCESSORIES BROCHURE
ACCESSORIES BROCHURE | MTP6000
MTP6000 SERIES
ACCESSORIES
SUPPORTING YOUR
TEAM TODAY AND
WELL INTO THE FUTURE
ACCESSORIES BROCHURE | MTP6000
PAGE 2
STAY SAFE
AND CONNECTED
IN THE MOST
DEMANDING
SITUATIONS
REMOTE SPEAKER
MICROPHONES
Page 6
SURVEILLANCE KITS
Page 8
EARPIECES
AND HEADSETS
Page 10-15
CARRY ACCESSORIES
Page 16-19
ACCESSORIES BROCHURE | MTP6000
CHARGERS
Page 20
BATTERIES
Page 21-23
IN-VEHICLE SOLUTIONS
Page 24-26
MISCALLANEOUS
Page 26
ANTENNAS
Page 27
PAGE 3
IMPRES™
ACCESSORIES
ARE AUTOMATIC
ACCESSORIES BROCHURE | MTP6000
Plug in our IMPRES accessories – such as the Remote
3PEAKERÏ-ICROPHONEÏ23-ÏnÏANDÏYOURÏRADIOÏIDENTIlESÏ
ITÏANDÏAUTOMATICALLYÏLOADSÏTHEÏCORRECTÏPROlLEÏTOÏ
optimise audio performance. What’s more, our IMPRES
large-speaker RSMs match the high-powered speaker
on your radio for even better communications in highnoise environments – essential when on noisy, hectic
incident scenes.
PAGE 4
WHICH MICROPHONE IS RIGHT FOR ME?
TALKING OUTDOORS IN DEMANDING WEATHER?
If you work outdoors in demanding weather, a windporting
microphone is right for you. It reduces the effect of wind and other
sounds whenever you use the microphone. It also prevents water
from clogging the microphone for clear transmissions.
ACCESSORIES BROCHURE | MTP6000
TALKING IN A CROWD OR NEAR NOISY MACHINERY?
A noise-cancelling microphone is right for you. It reduces
background noise to optimise audio. For clear transmission,
hold the microphone directly in front of your mouth, facing the
source of the noise.
PAGE 5
REMOTE SPEAKER MICROPHONES
You need the best possible audio quality so your communications remain loud and clear.
With these remote speaker microphones, you can stay safe in the toughest situations.
REMOTE SPEAKER MICROPHONES
PMMN4099
IMPRES large submersible windporting RSM with
high/low volume toggle switch, emergency button and
programmable buttons, 3.5mm audio jack, IP68.
PMMN4082
IMPRES large windporting RSM with emergency and
programmable buttons, IP57.
PMMN4081
IMPRES large noise-cancelling RSM with 3.5mm
audio jack and emergency button, IP54.
PMMN4080
IMPRES small windporting RSM with 3.5mm audio
jack and emergency button, IP54.
PMMN4113
IMPRES windporting RSM with 4-pole Nexus Jack,
an emergency and a programmable button. This RSM
includes a front and side push-to-talk.
PMMN4024
Small windporting RSM with 3.5mm audio jack, IP54.
No emergency button.
RSM ACCESSORIES FOR PMMN4113
RMN4052
Peltor Tactical-Pro medium weight
headset with boom mic and headband.
GMMN4585
SAVOX HC-1 Helmet-COM®
unit bone-mic / single speaker.
ACCESSORIES BROCHURE | MTP6000
GMMN4584
SAVOX HC-2 Helmet-COM®
unit bone-mic / dual speaker.
PMLN7188
Receive-only earpiece with translucent
TUBEÏANDÏRUBBERÏEARTIPÏCERTIlEDÏWITHÏTHEÏ
PMMN4113.
PAGE 6
RSM ACCESSORIES FOR PMMN4099, PMMN4081, PMMN4080, PMMN4024
MDRLN4885
Receive-only foam covered earbud with
coiled cord.
PMLN7396
Receive-only, adjustable D-style
earpiece, designed to provide a secure
ANDÏCOMFORTABLEÏlT
ACCESSORIES BROCHURE | MTP6000
PMLN7560
Receive-only earpiece with translucent
tube and rubber eartip.
WADN4190
2ECEIVEONLYÏmEXIBLEÏEARPIECE
PAGE 7
SURVEILLANCE KITS
DISCREET AND CLEAR AUDIO
Transmit and receive discreetly with these surveillance kits. These accessories
feature a streamlined design and rugged cables that withstand tough conditions.
ACCESSORIES BROCHURE | MTP6000
PAGE 8
IMPRES SURVEILLANCE KIT
STANDARD SURVEILLANCE KITS
PMLN6123
IMPRES 3-wire surveillance kit with
translucent tube and 1 programmable
button, black.
PMLN6124
IMPRES 3-wire surveillance kit with
translucent tube and 1 programmable
button, beige.
PMLN6125
1-wire receive-only surveillance kit,
black.
PMLN6126
1-wire receive-only surveillance kit,
beige.
PMLN6129
IMPRES 2-wire surveillance kit with
translucent tube and 1 programmable
button, black.
PMLN6130
IMPRES 2-wire surveillance kit with
translucent tube and 1 programmable
button, beige.
PMLN6225
2-wire surveillance kit with translucent
tube, black.
NNTN8459
1-wire surveillance voice tube
with in-line push-to-talk and
microphone, black.
SURVEILLANCE ACCESSORY
REPLACEMENT KITS FOR 2- AND 3-WIRE KITS
PMLN6123, PMLN6124, PMLN6129, PMLN6130 and NNTN8459
SURVEILLANCE ACCESSORY
REPLACEMENT KITS FOR 1-WIRE KITS
PMLN6125 and PMLN6126
RLN6242 - Low noise kit with translucent tube and 1 clear rubber eartip.
RLN5886 - Low noise kit with 1 clear rubber eartip.
RLN6282 - Replacement standard clear rubber eartip. Pack of 50.
RLN5887 - High noise kit with 2 foam earplugs.
RLN6281 - Replacement foam plugs for RLN6242. Noise reduction = 24dB.
Pack of 25 pairs.
Note: for high noise kit solution combine RLN6242 low noise kit and RLN6281
replacement foam plugs.
ACCESSORIES BROCHURE | MTP6000
PAGE 9
EARPIECES AND HEADSETS
Headsets and earpieces allow you to transmit and receive clear communication while keeping your hands
free for daily tasks. From ultra lightweight to heavy duty, select the audio solution that’s right for you.
PMLN6852
Heavy duty headset, behind-the-head
with noise-cancelling boom microphone
and push-to-talk, noise reduction=24dB.
PMLN7466
Heavy duty headset, over-the head with
noise-cancelling boom microphone and
push-to-talk.
PMLN5096
D-style earpiece with boom microphone
and in-line push-to-talk.
PMLN6634
Lightweight headset, single muff with
adjustable headband, boom microphone
and in-line push-to-talk.
ACCESSORIES BROCHURE | MTP6000
PMLN5102
Ultra lightweight headset with boom
microphone and in-line push-to-talk.
PAGE 10
MAG ONE HEADSETS
PMLN5974
Mag One lightweight headset with boom
microphone and in-line push-to-talk.
MAG ONE EARPIECES
PMLN5979
Mag One behind-the-head headset with
boom microphone and in-line push-to-talk.
4HEÏAUDIOÏPROlLESÏONÏOURÏ-40ÏACCESSORIESÏ
make hearing clearly almost effortless. They
ensure you get the best performance possible
by adapting to how the accessory is worn – in
the ear, on a lapel and more. Simply plug in
the accessory and select the accessory you
are wearing from the radio menu and the radio
automatically optimises the accessory audio for
an exceptional listening experience.
PMLN5975
Mag One swivel earpiece with in-line
microphone and push-to-talk.
PMLN5973
Mag One ear receiver with in-line
microphone and push-to-talk.
PMLN5976
Mag One earset with in-line
microphone and push-to-talk.
PMLN6069
Mag One earbud with in-line
microphone and push-to-talk.
EARPIECES WITH SHORT CORDS
The following earpieces have short cords, allowing you to wear the
radio on the shoulder.
PMLN7397
Receive-only voice tube, black.
PMLN7512
Adjustable D-style receive-only earpiece, black.
PMLN7164
Mag One receive-only swivel earpiece, black.
ACCESSORIES BROCHURE | MTP6000
PAGE 11
BONE CONDUCTION
SOLUTIONS
Temple transducers rest on
your temple, convert audio into
sound vibration and transmit
it to your inner ear. If you
are using hearing protection
or there is loud background
noise, you can hear the audio
from your radio and the
surrounding environment.
Since the transducer sits in
front of your ears, you can also
wear earplugs and still hear
the radio.
PMLN6624
IMPRES temple transducer, bone
conduction headset with boom
microphone and in-line push-to-talk
(behind-the-head headband).
PMLN5653
Bone conduction ear microphone
with in-line large push-to-talk with
protective ring. Suitable for high noise
environment when ear muffs are worn
over the ear microphone.
ACCESSORIES BROCHURE | MTP6000
PAGE 12
EARPIECES AND HEADSETS
TACTICAL SOLUTIONS
Tactical Audio Accessories are enhanced by a high speed Digital Signal Processor (DSP), which only detects
the human voice. This ensures reliable transmission without clipping your message even in the noisiest
ENVIRONMENTSÏ3ELECTÏFROMÏVARIOUSÏCONlGURATIONSÏTHATÏAREÏDESIGNEDÏTOÏALLOWÏYOUÏTOÏOPERATEÏTHEÏAUDIOÏ
accessory with ease.
PMLN6766
Tactical boomless temple transducer
allows the user’s ears to be uncovered
to hear surrounding environmental
sounds while using a radio. 2 bone
vibration speakers for receiving, and
a microphone embedded in the left
transducer for transmitting.
Requires interface module
PMLN6765 or PMLN6827.
PMLN6767
Tactical remote body push-to-talk
designed for use when wearing gloves
and other heavy gear and provides
hands-free operations when situations
require.
PMLN6833
Tactical heavy duty temple transducer
with boom microphone. This headset
features 2 bone vibration speakers
for receiving and a rugged boom
microphone for transmitting.
Requires interface module
PMLN6765 or PMLN6827.
PMLN6830
Tactical remote ring push-to-talk
designed for users to remotely key up
the radio and customise their solution.
PMLN6828
Tactical throat microphone picks up
the user’s voice directly from the vocal
chords, making it optimal for use in
noisy environments.
Requires interface module
PMLN6765 or PMLN6827.
PMLN6829
Tactical ear microphone picks up sound
through bone vibrations in the ear canal,
giving personnel the ability to hear and
speak directly through the lightweight
earpiece. The built-in bone conduction
microphone and receiver eliminate the
need for a boom microphone.
Requires interface module
PMLN6765 or PMLN6827.
PMLN6765
Tactical voice activated (VOX) and
push-to-talk interface module allows
users to customise their solution.
PMLN6827
Tactical push-to-talk interface
module allows users to customise and
complete their solution.
Intended for use with interface module
PMLN6765 or PMLN6827.
Intended for use with interface module
PMLN6765 or PMLN6827.
ACCESSORIES BROCHURE | MTP6000
PAGE 13
EARPIECES AND HEADSETS
INTEGRATED BLUETOOTH®
Our exclusive Operations Critical
Wireless Accessories provide
clear, reliable communication
even in loud environments. An
optional wireless push-to-talk pod
seamlessly connects to your radio,
enabling discreet transmissions
when hidden in a pocket or beneath
your uniform.
NTN2572
Operations critical wireless earpiece with
12” cable.
Requires NNTN8191 operations critical
wireless push-to-talk pod.
PMLN7052
Wireless 1- wire surveillance kit, black.
ACCESSORIES BROCHURE | MTP6000
PAGE 14
POWER SUPPLIES
MUST BE ORDERED WITH NNTN8191
PS000042A12 FOR EU PLUG
PS000042A13 FOR UK PLUG
PS000042A11 FOR US PLUG
Mini-USB charging plug with UK, Euro and US plugs.
PMPN4007
Mini-USB charging plug with Australia and New Zealand plugs.
NNTN8294
Wireless Bluetooth earbud with 11.5
inch cable.
Requires NNTN8191 operations critical
wireless push-to-talk pod.
NNTN8295
Wireless Bluetooth earbud with
45 inch cable.
NNTN8191
Operations critical wireless
push-to-talk pod. Power supply
for charging pod must be ordered
separately.
Note:
Supports full duplex private calls and telephone
interconnect for NNTN8294, NNTN8295, NTN2572
and PMLN7052.
PMPN4008
Mini-USB charging plug with China plug.
PMPN4009
Mini-USB charging plug with US plug.
PMPN4015
Mini-USB charging plug with Korea plug.
Requires NNTN8191 operations critical
wireless push-to-talk pod.
ACCESSORIES BROCHURE | MTP6000
PAGE 15
CARRY ACCESSORIES
Wear your radio on the shoulder, chest or hip – it’s your decision. Our carry accessories keep your hands
free so you can concentrate on the task ahead. Choose from a range of leather carry cases, straps,
shoulder-wearing accessories and belt clips, all designed for easy access to your MTP6000 Series radio.
ACCESSORIES BROCHURE | MTP6000
PAGE 16
PMLN5616
2-inch short belt clip.
HLN9714
2.5-inch large belt clip.
PMLN6252
Soft leather case with 2.5-inch swivel
belt loop.
PMLN6250
Soft leather case with 3-inch swivel
belt loop.
PMLN6253
Hard leather case with 2.5-inch swivel
belt loop.
PMLN6249
Hard leather case with 3-inch swivel
belt loop.
PMLN5004
Shoulder wearing device with
Peter Jones (ILG) Klick Fast stud.
Compatible with all Peter Jones (ILG)
Klick Fast docks and belt loops.
PMLN6251
Soft leather pouch for use with
shoulder wearing device (PMLN5004).
PMLN5580
2-inch replacement swivel belt loop.
PMLN5611
3-inch replacement swivel belt loop.
PMLN5610
2.5-inch leather swivel belt loop.
ACCESSORIES BROCHURE | MTP6000
PAGE 17
HLN6602
Universal chest pack.
RLN4570
Break-away chest pack with radio holder.
RLN4815
RadioPak radio utility case.
HLN9767
Wrist strap.
NTN5243
Shoulder strap, attaches to D-rings on
carry cases.
ACCESSORIES BROCHURE | MTP6000
PAGE 18
CARRY ACCESSORIES
PETER JONES (ILG) KLICK FAST ACCESSORIES
The Peter Jones Klick Fast System allows you to wear your radio securely in a variety of ways. The slim,
durable Klick Fast Connector is compatible with all Klick Fast Docks. Simply slide the connector into any Klick
Fast Dock and it locks securely into place. Once docked, your radio can be rotated to any of seven positions
while remaining secure. Undocking your radio takes seconds - simply rotate the radio to the inverted position
and it slides free.
GMDN0386
Peter Jones (ILG) Klick Fast sew-on
dock for mounting on uniforms, body
armour - attaches to shoulder wearing
device with stud PMLN5004.
GMDN0445AA
Peter Jones (ILG) Klick Fast snap-on tag
dock - attaches to shoulder wearing
device with stud PMLN5004.
GMDN0445AC
Peter Jones (ILG) Klick Fast belt loop
with mounting dock, low hang
(50mm in width).
GMDN0497
Peter Jones (ILG) Klick Fast 38mm belt
dock - attaches to shoulder wearing
device with stud PMLN5004.
GMDN0547
Peter Jones Klick Fast leather belt loop
with KlickFast Dock for 50mm belts attaches to shoulder wearing device
with stud PMLN5004.
GMDN0566AC
Peter Jones (ILG) Klick Fast leather belt
loop and docks up to 50mm in width
- attaches to shoulder wearing device
with stud PMLN5004.
GMLN4488
Peter Jones (ILG) Klick Fast 50mm belt
dock - attaches to shoulder wearing
device with stud PMLN5004.
WALN4307
0ETERÏ*ONESÏ),'Ï+LICKÏ&ASTÏRETROÏlTTINGÏ
GARMENTÏWITHÏEASYÏSCREWTOlTÏDOCKÏ
- attaches to shoulder wearing device
with stud PMLN5004.
ACCESSORIES BROCHURE | MTP6000
PAGE 19
CHARGERS
Motorola Solutions Original™ÏCHARGERSÏAREÏTESTEDÏANDÏCERTIlEDÏTOÏCHARGEÏYOURÏRADIOÏSAFELYÏSOÏYOURÏRADIOÏISÏ
READYÏWHENÏYOUÏAREÏ3ELECTÏFROMÏAÏVARIETYÏOFÏSINGLEÏANDÏMULTIUNITÏCHARGERSÏYOUREÏSUREÏTOÏlNDÏONEÏTHATÏlTSÏ
your needs.
DUAL DESKTOP CHARGER:
SEQUENTIAL CHARGING
Supports sequential charging of radio
lRSTÏTHENÏSPAREÏBATTERYÏ-INI53"Ï
port supports connection to Integrated
Terminal Management (iTM) software
and download of images and
lNGERPRINTSÏFROMÏ-40Ï
camera model.
NNTN8244
Dual desktop charger with US plug
included (110-240V).
NNTN8245
Dual desktop charger with Euro plug
included (110-240V).
NNTN8246
Dual desktop charger with UK plug
included (110-240V).
DUAL DESKTOP CHARGER:
SIMULTANEOUS CHARGING
Supports simultaneous charging of
radio and spare battery. Mini-USB
port supports connection to iTM
software and download of images and
lNGERPRINTSÏFROMÏ-40Ï
camera model.
PMLN6493A
Dual desktop charger with US plug
included (110-240V).
PMLN6494A
Dual desktop charger with Euro plug
included (110-240V).
PMLN6495A
Dual desktop charger with UK plug
included (110-240V).
MULTI-UNIT RADIO CHARGERS
Includes 6 radio charger inserts that
are compatible with all MTP6000 and
MTP3000 series radio. Mini-USB port
supports connection to iTM software
and download images from MTP6750
camera model.
NNTN8144
Multi-unit radio charger with US plug.
NNTN8145
Multi-unit radio charger with Euro plug.
MULTI-UNIT BATTERY CHARGERS
Includes 6 battery charging inserts that
are compatible with all MTP6000 and
MTP3000 series radios.
NNTN8151
Multi-unit battery charger with US plug.
NNTN8152
Multi-unit battery charger with Euro plug.
NNTN8153
Multi-unit battery charger with UK plug.
NNTN8146
Multi-unit radio charger with UK plug.
SKN6371
Mini USB data cable for
NNTN8144/8145/8146.
NNTN6844
Wall mount bracket for 6-way
multi-unit charger.
ACCESSORIES BROCHURE | MTP6000
PAGE 20
BATTERIES
TESTED AND PROVEN TOUGH
NNTN7560
Optional multi-unit charging bracket with
storage tray for programming cables.
PERSONAL CHARGERS
Conveniently and quickly charge
your radio.
Power your radio with the only batteries that are proven tough.
Time after time, in test after test – for drop, vibration and
Electrostatic Discharge (ESD) – Motorola Solutions Original
batteries withstand shocks, knocks, drops and shakes to
outperform the leading brands. If your radio gets banged
on a ride, rattled by heavy equipment or shocked by static
electricity, you can depend on our batteries to stand tough.
PS000042A31
Personal charger with US plug
(110-240V).
NNTN8038
Personal charger with Euro plug
(110-240V).
PS000042A33
Personal charger with UK plug
(110-240V).
NNTN8037
Battery charging insert for multi-unit charger.
NNTN8023
2150 mAh high-capacity Li-ion battery.
NNTN8036
Radio charging insert for multi-unit charger.
NNTN8020
1650 mAh standard-capacity Li-ion battery.
ACCESSORIES BROCHURE | MTP6000
PAGE 21
IMPRES 2
SUPPORTED BY MTP6650 ONLY
Your radio is your lifeline. If your
battery dies, it jeopardizes everything.
That’s why there’s IMPRES 2, a
next-generation energy system that’s
safer and smarter, while keeping you
powered for even longer. With IMPRES
2, you can charge IMPRES batteries
up to 1.6 times faster. Customize your
charging to extend the life of batteries
in storage. And manage your batteries
more intelligently with enhanced
diagnostics, so you get the most from
each battery.
IMPRES 2 batteries have been
improved inside and out, so your team
can tackle whatever the day brings.
With higher capacity, you’ll get more
talk time. With better water resistance,
you’ll never think twice about
submersion. And with up to 60% more
charging cycles than standard Lithium
Ion batteries, you’ll reduce costs.
ACCESSORIES BROCHURE | MTP6000
PAGE 22
PMPN4216
IMPRES 2 Multi-Unit Charger with display.
Includes US/JPN power supply.
PMNN4522
IMPRES 2 3400 mAh Li-ion Battery.
PMPN4217
IMPRES 2 Multi-Unit Charger with display.
Includes EURO power supply.
PMPN4218
IMPRES 2 Multi-Unit Charger with display.
Includes UK/HK power supply.
ACCESSORIES BROCHURE | MTP6000
PAGE 23
IN-VEHICLE SOLUTIONS
!ÏRANGEÏOFÏINVEHICLEÏSOLUTIONSÏGIVEÏYOUÏTHEÏmEXIBILITYÏTOÏCHARGEÏANDÏENHANCEÏ
the coverage area of your portable from your vehicle.
ACCESSORIES BROCHURE | MTP6000
PAGE 24
NNTN8040
Vehicular power adapter, 12-24V plug
(cigarette lighter adapter). Lets you
charge the radio in the vehicle.
PMLN6521
Vehicular cradle - radio holder only
(no charging).
PMLN6433
Vehicular cradle with RF connection and
power adapter holder for radio charging.
PMLN6434
Vehicular cradle with power module and
cables for radio charging - hard wired.
PMLN6522
Vehicular cradle with RF connection radio holder only (no charging).
PMLN6432
Vehicular cradle with power adapter
holder for radio charging.
Requires vehicular power adapter
NNTN8040.
Requires vehicular power adapter
NNTN8040.
ACCESSORIES BROCHURE | MTP6000
PMLN6431
Vehicular cradle with RF connection,
power module and cables for radio
charging - hard wired.
PAGE 25
IN-VEHICLE SOLUTIONS
CAR KIT
The MTP6000 Car Kit is designed to transform your MTP6000 series portable into a virtual mobile radio
providing in-vehicle battery charging, hands-free operation and extended coverage. For more information
on these car kits, please see the TETRA MTP6000 Series Car Kit Brochure.
GM0301
The standard car kits provides a
complete in-car solution and includes
the following items:
• Car kit junction box
• Standard cradle with RF connection
• Power cable and mounting bracket
• Smart visor microphone
• 7.5W External Speaker
• Push button, push-to-talk
• Installation manual and user guide
GM0302
The customised car kit allows you
to design a complete in-car solution
tailored to your needs and includes the
following standard items:
• Standard items
• Car kit junction box
• Power cable and mounting bracket
• Installation manual and user guide
GMAE4290
Antenna for digital car kit,
380 - 430MHz / GPS.
GMAE4293
Antenna for digital car kit,
430-470MHz / GPS.
In addition, choose from various options
to custom tailor your car kit:
• Car kit cable
• Cradle type
• Power cable and mounting bracket
• Microphone
• Speaker
• Antenna
• Push-to-talk
MISCELLANEOUS
PMHN4210
Bottom connector dust cover.
PMKN4129A
TETRA USB data cable.
PMKN4124
+EYlLLÏCABLEÏFORÏ%%ÏKEYS
15012046001
Dust cover for side connector.
PMKN4127
Bottom connector serial
data cable.
ACCESSORIES BROCHURE | MTP6000
PAGE 26
ANTENNAS
Supporting MTP6550 and MTP6750
Supporting MTP6650 only
85012034001
Stubby antenna 350-390 MHz, 80mm.
85012066001
Short stubby antenna 410-470 MHz, 55mm.
PMAE4105A
Antenna whip 350-470 MHz, 120mm.
85012033001
Stubby antenna 380-430 MHz, 80mm
85012031001
Whip antenna 380-430 MHz, 110mm.
PMAE4106A
Antenna stubby 380-430 MHz, 60mm.
85012056001
Short stubby antenna 380-430 MHz, 55mm.
85012065001
Whip antenna 410-470 MHz, 110mm.
PMAE4107A
Antenna stubby 380-430 MHz, 90mm.
2ADIOÏANTENNAÏIDENTIlCATIONÏBANDSÏ
package of 10:
32012144001: Grey
32012144002: Yellow
32012144003: Green
32012144004: Blue
32012144005: Purple
PMAE4103A
Antenna stubby 410-470 MHz, 60mm.
2ADIOÏANTENNAÏIDENTIlCATIONÏBANDSÏ
package of 5:
PMLN6285: Blue
PMLN6286: Pearl White
PMLN6287: Neon Green
PMLN6288: Neon Yellow
PMLN6289: Neon Red
ACCESSORIES BROCHURE | MTP6000
PAGE 27
For more information, please visit us on the web at:
www.motorolasolutions.com/MTP6000
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the property of their respective owners. ©2017 Motorola Solutions, Inc. All rights reserved. 10-2017