Molex Premise Networks
Systems Catalogue
PowerCat 6™
“The Cat 6 Solution”
FEATURES AND SPECIFICATIONS
The PowerCat 6™ Product Range
The PowerCat 6 Product Range
The PowerCat 6 Product Range
■ Molex Premise Networks PowerCat 6 system
product range is designed to comply with the draft
Category 6 standards: (TIA/EIA 568B-2-1 Draft
(PN 3727), ISO/CENELEC Class E (2001),
ISO/IEC JTC 1/SC 25/WG 3 N 696.
■ The performance of the system is enhanced by the
patented Molex plug and socket combination, allowing
Category 6 level performance and backwards
compatibility with the Molex Premise Networks
PowerCat (C5E) system.
■ Molex Premise Networks recommends that the full
range of PowerCat 6 products is used in a system to
provide the performance indicated in the draft Category
6 standard.
PowerCat 6™
“The Cat 6 Solution”
FEATURES AND SPECIFICATIONS
PowerCat 6 MOD-SNAP™ Module
The MOD-SNAP modular system provides a flexible and
versatile method of installation, allowing the user the
choice of installing as many data outlets as required.
The modules are fully assembled units featuring the
Molex Premise Networks low profile PowerCat 6 RJLP
connector and a 25x38.5mm fascia (BT 6C size),
shutter and spring assembly.
PowerCat 6 Cable
■ Unshielded 4 Pair PVC and LSZH Cable
■ Central separator for the reduction of NEXT &
ELFEXT
■ 24 AWG solid conductor
■ Colour coded pairs for ease of termination
■ 500 metre reel
■ Enhanced performance RJ45 RJLP connector
■ Space saving low profile design enables installation
■
■
■
■
■
in shallow backboxes and trunking
Spring loaded shutter
Protected labelling facility
Compatible with MOD-SNAP wallplates
Ideal for floorbox applications
568B wired
Molex Premise Networks unique patented RJLP RJ45
connector offers a low profile, space saving design that
enables installation in shallow backboxes and trunking.
Order No.
CAA-00074
CAA-00079
Description
Cable 500m Reel PVC - UTP
Cable 500m Reel LSZH - UTP - IEC 332.1
Order No.
MMS-00001-02
Description
MOD-SNAP RJLP Module, RJ45, 568B, UTP
Other cable variants available - For more information contact Customer Services
PowerCat 6 Patch Panels
Molex Premise Networks patch panels are a versatile
means for connecting horizontal cabling. Featuring an
integral rear cable management tray for ease of
installation and cable dressing. Port labelling is also
featured for site specific network administration.
Suitable for high speed data transmission, these panels
were designed to meet the highest performance
standards in the industry. Molex Premise Networks
patented KATT IDC is terminable using industry
standard tooling. Fixing kit, cable ties and installation
instructions are included.
Order No.
PID-00042
PID-00043
PID-00065
■
■
■
■
■
■
■
■
■
16 Ports 1U
24 Ports 1U
48 Ports 2U
PCB Mounted KATT IDC
EIA 568B wired
RJ45 jacks
Standard 19" rack mounted
Graphite grey textured finish
Integral cable management
Description
16 Port Panel 1U RJ45 568B - UTP
24 Port Panel 1U 568B - UTP
48 Port Panel 2U 568B - UTP
* Colour Options - C = Red, E = Grey, H = Blue, J = Green, K = Yellow
Order No.
MEU-00022-02
in shallow backboxes and trunking
■ Spring loaded shutter
■ Compatible with existing range of Euromod
wallplates
■ 568B wired
Description
Euromod RJLP Module, RJ45, 568B, White - UTP
PowerCat 6 Office Block™
Designed in accordance with TSB75, Office Block is the
ideal solution for open office cabling. Its attractive
and compact design facilitates a simple, organised
installation for areas where space is limited. Designed
to support high speed data transmission systems, Office
Block utilises the Molex Premise Networks RJSE
connector.
Unshielded 4 Pair Stranded Cable
Pre-terminated with WE8W Molex Plugs
Overmoulded strain relief boots
Available in 1,2,3 and 5 metre lengths
Order No.
PCD-00050-0*
PCD-00052-0*
PCD-00054-0*
PCD-00058-0*
■ Enhanced performance RJ45 RJLP connector
■ Space saving low profile design enables installation
Molex Premise Networks unique patented RJLP RJ45
connector offers a low profile, space saving design that
enables installation in shallow backboxes and trunking.
PowerCat 6 Patch Cords
■
■
■
■
PowerCat 6 Euromod™ Module
The Euromod modular system provides a flexible and
versatile method of installation. This modular system
offers a wide range of wallplates and modules that
allow the user to install as many data outlets as
required. The modules are fully assembled units
featuring the Molex Premise Networks low profile
PowerCat 6 RJLP connector and a 25x50mm fascia,
shutter and spring assembly.
Description
Patch Cord 1m grey - UTP
Patch Cord 2m grey - UTP
Patch Cord 3m grey - UTP
Patch Cord 5m grey - UTP
Order No.
SID-00027-02
SID-00028-02
SID-00029-02
SID-00030-02
SID-00031-02
SID-00032-02
SID-00033-02
■ Compact, attractive and versatile 1, 2, 4 & 6 port
■
■
■
■
■
surface mount block
Cable entry from rear knockouts
Labelling facility
Can be mounted with screws or magnet
Snap on shutters are provided
Dual colour coded IDC blocks provide the option of
568A or 568B wiring
Description
Office Block 1 port, RJ45, RJSE, Shuttered, White, 568A/B - UTP
Office Block 2 port, RJ45, RJSE, Shuttered, White, 568A/B - UTP
Office Block 4 port, RJ45, RJSE, Shuttered, White, 568A/B - UTP
Office Block 6 port, RJ45, RJSE, Shuttered, White, 568A/B - UTP
Office Block 2 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B - UTP
Office Block 4 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B - UTP
Office Block 6 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B - UTP
PowerCat -UTP
The Cat 5e Solution
FEATURES AND SPECIFICATIONS
PowerCat -UTP
The Cat 5e Solution
FEATURES AND SPECIFICATIONS
The PowerCat™ UTP Product Range
■ Molex Premise Networks Category 5e product range
is known as the PowerCat system. Designed to meet or
exceed the requirements of: TIA/EIA 568A-A5,
ISO/CENELEC Class D (2002), ISO/IEC JTC 1/SC 25/
WG 3 N 696 standards.
■ The product range offers backwards compatibility
with Category 5 systems, with enhanced performance in
support of the Gigabit Ethernet protocol.
PowerCat UTP Cable
PowerCat UTP Patch Cords
■ 4 pair PVC or LSZH Cable
■ Colour coded pairs for ease of termination
■ 305m easy spool box and 1 km reel available
■ Unshielded 4 Pair Stranded Cable
■ Pre-terminated with WE8W Plugs
■ Strain Relief Boots
Order No.
39.A0360
39.A0370
CAA-00010
CAA-00071
CAA-00069
CAA-00070
Description
4 Pair UTP, PVC, Cat 5e Cable, 305m Box
4 Pair UTP, PVC, Cat 5e Cable, 1km Reel
4 Pair UTP, LSZH, IEC332.3, Cat 5e Cable, 305m Box
4 Pair UTP, LSZH, IEC332.3, Cat 5e Cable, 1km Reel
4 Pair UTP, LSZH, IEC332.1, Cat 5e Cable, 1km Reel
4 Pair UTP, LSZH, IEC332.1, Cat 5e Cable, 305m Box
Order No.
PCD-00068-0*
PCD-00069-0*
PCD-00070-0*
PCD-00071-0*
PCD-00073-0*
PCD-00072-0*
Description
UTP Patch Cord 1m
UTP Patch Cord 2m
UTP Patch Cord 3m
UTP Patch Cord 5m
UTP Patch Cord 7m
UTP Patch Cord 10m
* Colour Options - C = Red, E = Grey, H = Blue, J = Green, K = Yellow
PowerCat UTP Patch Panels
Molex Premise Networks patch panels are a versatile
means for connecting horizontal cabling. Featuring an
integral rear cable management tray for ease of
installation and cable dressing. Port labelling is also
featured for site specific network administration.
Suitable for high speed data transmission, these panels
were designed to meet the highest performance
standards in the industry. Molex Premise Networks
patented KATT IDC is terminable using industry
standard tooling. Fixing kit, cable ties and installation
instructions are included.
Order No.
27.1B.241.A005G
PID-00058
PID-00059
■
■
■
■
■
■
■
■
24 Ports 1U
48 Ports 2U
PCB Mounted KATT IDC
EIA 568B wired
RJ45 jacks
Standard 19" rack mounted
Graphite grey textured finish
Integral cable management
PowerCat MOD-SNAP & Euromod Modules
The MOD-SNAP & Euromod modular systems provide a
flexible and versatile method of installation, allowing
the user the choice of installing as many data outlets as
required. The modules are fully assembled units
featuring the Molex Premise Networks low profile Cat
5e RJLP connector and a 25x38.5mm fascia
(BT 6C size, MOD-SNAP)) or 25x50mm fascia
(Euromod), shutter and spring assembly.
■ Enhanced performance RJ45 RJLP connector
■ Space saving low profile design enables installation
■
■
■
■
■
■
in shallow backboxes and trunking
Spring loaded shutter
Protected labelling facility
Compatible with MOD-SNAP wallplates
Ideal for floorbox applications (MOD-SNAP)
Compatible with Euromod Wallplates
568B wired
Molex Premise Networks unique patented RJLP RJ45
connector offers a low profile, space saving design that
enables installation in shallow backboxes and trunking.
Description
24 Port Panel - With Cover, 1U, 568B
24 Port Panel, 1U, 568B*
48 Port Panel, 2U, 568B*
Order No.
42.1B.011.A0032
17.1B.011.A0042
MEU-00019-02
Description
MOD-SNAP RJLP Module, RJ45, 568B, Cat 5e, White
Euromod RJLP Module, RJ45, 568B, Cat 5e, White
Angled Euromod RJLP Module, RJ45, 568B, Cat 5e, White
* Product is available without “Port Identification Markings” - Contact Customer Services for Part No’s.
PowerCat UTP High Density Patch Panels
Molex Premise Networks PowerCat (C5E) High Density
Patch Panels are ideal for ISP applications or
installations where cabinet/rack space is at a premium.
Providing 32 or 48 ports in 1U, these patch panels
offer an integral rear cable management tray
specifically designed for neat and easy cable dressing.
The front of the panel has a protected labelling facility
for clear port labelling.
■
■
■
■
■
■
■
■
PowerCat (C5E) performance
32 Ports 1U
48 Ports 1U
PCB Mounted KATT IDC
EIA 568B wired
RJ45 Jacks
Standard 19” rack mounted
Graphite grey textured finish
Suitable for high speed data transmission, this panel
was designed to meet the highest performance
standards in the industry, utilising the PowerSum
principle of measurement and testing.
Order No.
PID-00073
PID-00074
Description
48 Port PowerCat (C5E) Patch Panel 1U
32 Port PowerCat (C5E) Patch Panel 1U
PowerCat Office Block
Designed in accordance with TSB75, Office Block is the
ideal solution for open office cabling. Its attractive
and compact design facilitates a simple, organised
installation for areas where space is limited. Designed
to support high speed data transmission systems, Office
Block utilises the Molex Premise Networks RJSE
connector.
Order No.
SID-00009-02
SID-00010-02
SID-00011-02
SID-00012-02
SID-00024-02
SID-00025-02
SID-00026-02
■ Compact, attractive and versatile 1, 2, 4 & 6 port
■
■
■
■
■
surface mount block
Cable entry from rear knockouts
Labelling facility
Can be mounted with screws or magnet
Snap on shutters are provided
Dual colour coded IDC blocks provide the option of
568A or 568B wiring
Description
Office Block 1 port, RJ45, RJSE, Shuttered, White, 568A/B
Office Block 2 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B
Office Block 4 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B
Office Block 6 port (with magnet), RJ45, RJSE, Shuttered, White, 568A/B
Office Block 2 port, RJ45, RJSE, Shuttered, White, 568A/B
Office Block 4 port, RJ45, RJSE, Shuttered, White, 568A/B
Office Block 6 port, RJ45, RJSE, Shuttered, White, 568A/B
PowerCat - FTP
The Cat 5e Solution
FEATURES AND SPECIFICATIONS
PowerCat - FTP
The Cat 5e Solution
FEATURES AND SPECIFICATIONS
The PowerCat FTP Product Range
■ Molex Premise Networks Category 5e product range
is known as the PowerCat system. Designed to meet or
exceed the requirements of: TIA/EIA 568A-A5,
ISO/CENELEC Class D (2002), ISO/IEC JTC 1/SC 25/
WG 3 N 696 standards.
■ The product range offers backwards compatibility
with Category 5 systems, with enhanced performance in
support of the Gigabit Ethernet protocol.
PowerCat FTP Cable
PowerCat MOD-SNAP FTP Module
The MOD-SNAP modular system provides a flexible and
versatile method of installation, allowing the user the
choice of installing as many data outlets as required.
The modules are fully assembled units featuring the
Molex Premise Networks low profile Cat 5e RJLP
connector and a 25x38.5mm fascia (BT 6C size),
shutter and spring assembly.
■ 4 pair PVC or LSZH Cable
■ Colour coded pairs for ease of termination
■ 305m easy spool box and 1 km reel available
Order No.
CAA-00013
CAA-00021
CAA-00048
CAA-00049
CAA-00072
CAA-00073
Description
4 Pair FTP, PVC, Cat 5e Cable, 305m Box
4 Pair FTP, LSZH, IEC332.3, Cat 5e Cable, 305m Box
4 Pair FTP, PVC, Cat 5e Cable, 1km Reel
4 Pair FTP, LSZH, IEC332.3, Cat 5e Cable, 1km Reel
4 Pair FTP, LSZH, IEC332.1, Cat 5e Cable, 1km Reel
4 Pair FTP, LSZH, IEC332.1, Cat 5e Cable, 305m Box
PowerCat FTP & STP Patch Panels
The 16 and 24 Port Sliding STP Patch Panels allow easy
front loading access for installation, termination and
maintenance. A fixed 24 Port version of this panel is
also available and full shielding is achieved on all
versions by the provision of a braided foam RFI strip on
the base and cover of the panel into which the foil or
braid of the cable is pressed after termination.
■
■
■
■
■
■
■
■
16 & 24 Port
Sliding or Fixed STP version
FTP 24 Port
568A/B wired
Integral rear cable management
Port Identification
19” rack mounted
Graphite Grey finish
The 24 Port FTP Patch Panel offers through shield
continuity and is a versatile method of connecting
horizontal cabling in a FTP environment.
Order No.
PID-00019
PID-00026
PID-00030
PID-00075
Description
24 Port Sliding Panel, 1U, 568A/B, STP
16 Port Sliding Panel, 1U, 568A/B, STP
24 Port Fixed Panel, 1U, 568A/B, FTP
24 Port Fixed Panel, 1U, 568A/B, STP
PowerCat FTP Patch Cords
■
■
■
■
■
in shallow backboxes and trunking
Spring loaded shutter
Protected labelling facility
Compatible with MOD-SNAP wallplates
Ideal for floorbox applications
568B wired
Molex Premise Networks unique patented RJLP RJ45
connector offers a low profile, space saving design that
enables installation in shallow backboxes and trunking.
The FTP connector provides continuity of the cable
shield by providing a termination point for the drain
wire.
Order No.
MMS-00004-02
Description
MOD-SNAP RJLP Module, RJ45, 568B, Cat 5e, White
PowerCat Euromod FTP Modules
The Euromod modular system provides a flexible and
versatile method of installation. This modular system
offers a wide range of wallplates and modules that
allow the user to install as many data outlets as
required. The modules are fully assembled units
featuring the Molex Premise Networks low profile
Cat 5e RJLP connector and a 25x50mm fascia, shutter
and spring assembly.
■ Enhanced performance RJ45 RJLP connector
■ Space saving low profile design enables installation
in shallow backboxes and trunking
■ Spring loaded shutter
■ Compatible with Euromod Wallplates
■ 568B wired
Molex Premise Networks unique patented RJLP RJ45
connector offers a low profile, space saving design that
enables installation in shallow backboxes and trunking.
The FTP connector provides continuity of the cable
shield by providing a termination point for the drain
wire.
Order No.
MEU-00020-02
Description
Euromod RJLP Module, RJ45, 568B, Cat 5e, White
PowerCat Euromod 360˚ STP Module
The RJ45 shuttered module is designed specifically for
areas where there are high levels of Electro Magnetic
Interference (EMI) and offers the user 360˚ shield
protection. A two piece Die Cast shield is used for simple
installation avoiding sharp edges which might damage
cable.
■ Shielded 4 Pair Stranded Cable
■ Pre-terminated with WE8W Plugs
■ Strain Relief Boots
■ Enhanced performance RJ45 RJLP connector
■ Space saving low profile design enables installation
■ Die cast shield for EMC protection
■ RJ45 shuttered and with label facility
These fully assembled modules utilise Molex Premise
Networks unique patented RJLP RJ45 connector.
Order No.
PCD-00101-0*
PCD-00102-0*
PCD-00103-0*
PCD-00104-0*
PCD-00105-0*
PCD-00106-0*
* Colour Options - C = Red, E = Grey, H = Blue, J = Green, K = Yellow
Description
FTP Patch Cord 1m
FTP Patch Cord 2m
FTP Patch Cord 3m
FTP Patch Cord 5m
FTP Patch Cord 7m
FTP Patch Cord 10m
Order No.
MEU-00003-02
Description
PowerCat 360˚ Single Channel Euromod RJLP Module, RJ45, 568B, Cat 5e, White
Wallplates
FEATURES AND SPECIFICATIONS
Auxiliary Products
FEATURES AND SPECIFICATIONS
Wallplates
■ Molex Premise Networks Wallplate systems are a
highly popular economic alternative to the Euromod
and MOD-SNAP systems. These plates form part of the
PowerCat product range.
Fixed Wallplates
The wallplates are a complete assembly and include
Molex Premise Networks unique patented RJLP RJ45
connector. Offering a low profile, space saving design
that enables installation in shallow backboxes and
trunking.
Order No.
WNC-00007-02
WNC-00008-02
WNC-00010-02
WNC-00011-02
■
■
■
■
■
■
UK standard 86x86 mm fascia
Enhanced performance RJ45 RJLP connector
Spring loaded Shutters
1 or 2 port options available
UTP or FTP
568B wired
Description
1 Port PowerCat Fixed Shuttered UTP Wallplate 568B Cat 5e, White
2 Port PowerCat Fixed Shuttered UTP Wallplate 568B Cat 5e, White
1 Port PowerCat Fixed Shuttered FTP Wallplate 568B Cat 5e, White
2 Port PowerCat Fixed Shuttered FTP Wallplate 568B Cat 5e, White
Quadplate
The 4 Port shuttered fixed wallplate (Quadplate) is a
complete assembly, comprising 4 Cat 5e RJLP RJ45
connectors, fascia, spring loaded shutters and protected
labelling facility. The density of the wallplate makes it
ideal for situations where several services are required
in one location e.g. voice, data, video conferencing.
■
■
■
■
■
UK standard 86x86 mm fascia
Enhanced performance RJ45 RJLP connector
Spring loaded shutter
UTP or FTP
568B wired
The Quadplate is designed to fit in standard UK backboxes (86x86mm external dimension) with 2 (only)
screw fixing positions. The minimum internal backbox
dimension clearance allowable is 76x76mm up to
81x81mm.
Order No.
WNC-00009-02
WNC-00016-02
Description
4 Port PowerCat Shuttered UTP Wallplate 568B Cat 5e, White
4 Port PowerCat Shuttered FTP Wallplate 568B Cat 5e, White
Euromod and MOD-SNAP Wallplates
The Euromod and MOD-SNAP wallplate systems
provide a flexible and versatile method of installation.
Available in single and double gang versions the
wallplates are designed to accept Euromod (25x50mm
fascia) and MOD-SNAP (25x38.5mm fascia) modular
ranges.
Order No.
17-0101-02
17-0102-02
17-0111-02
17-0112-02
42-311-02
42-312-02
42-314-02
■ Euromod - 50x50mm aperture
■ MOD-SNAP - 38.5x22mm aperture
■ Flexible system allowing the installation of as many
modules as required
Description
Euromod Unlabelled Single Gang Wallplate - 86x86x10mm
Euromod Unlabelled Double Gang Wallplate - 86x145x10mm
Euromod Labelled Single Gang Wallplate - 86x86x10mm
Euromod Labelled Double Gang Wallplate - 86x145x10mm
MOD-SNAP Single Gang, Single Aperture - 86x86mm
MOD-SNAP Single Gang, Double Aperture - 86x86mm
MOD-SNAP Double Gang, 4 Aperture - 86x146mm
NOTE : There are numerous Blank Modules, Bezels and Backboxes available - Contact Customer Services for more information.
ISDN Range
The Molex Premise Networks ISDN range offers a
versatile method of installing ISDN services in a
structured cabling environment. Built-in resistors
provide the correct termination of the ISDN Basic Rate
S-Bus.
Order No.
27.00.240.A001G
17.10.017.A0012
18.10.017.A0012
18.10.027.A0012
42.10.017.A0012
42.A0020
available
■ Blue shutter distinguishes ISDN
■ No special application tooling requirements
■ Fully compliant with ISO 8877
Description
24 Port ISDN BUS Panel
Euromod ISDN Module, RJLP, Basic Rate, White
ISDN Basic Rate Wallplate, RJLP, White
ISDN Basic Rate and RJ45 Cat 5e Double Wallplate, RJLP, White
MOD-SNAP ISDN Module, RJLP, Basic Rate, White
RJ45 to RJ45 Socket, 150mm Line Adapter Unit ISDN Basic Rate
Line Adapter Units
The Molex Premise Networks Line Adapter Unit allows
telecommunications equipment fitted with standard BT
telephone plugs to be connected to RJ45 based
structured cabling systems.
Order No.
42-111-1A
42-112-1A
42-111-2A
42-112-2A
42-114
42-130
■ Fitted with built-in resistors
■ 24 Port Patch Panel
■ Euromod, MOD-SNAP and fixed wallplate options
■
■
■
■
Ideal for floorbox applications
OFTEL GA5 approved
Converts a direct line to RJ45 cabling system
Flying lead for flexibility
Description
RJ45 to BT6L Socket, 150mm Cord (PSTN)
RJ45 to BT6L Socket, 3m Cord (PSTN)
RJ45 to BT6L Socket, 150mm Cord (PABX)
RJ45 to BT6L Socket, 3m Cord (PABX)
RJ45 to BT6L Socket, 150mm Cord Secondary
RJ12 to BT6L PABX 150mm (Analogue - Secondary, Pins 4 & 5 digital)
Testers and Tooling
The SLT3S™ Tester is a rugged, lightweight product
designed to verify the integrity of 1-, 2-, 3-, and 4-pair
UTP or STP channels. Incorporating a unique 3-in-1
design, this tester features built-in modular jacks for
USOC, 568A and 568B wiring sequences.
■ Innovative 3-in-1 design features modular jacks for
The termination tool was designed to provide a
reliable connection at a highly competitive price.
Originally developed to support the Molex Premise
Networks KATT connector, the tool offers low-impact
force termination, which reduces strain on the installer.
■
■
■
■
Order No.
14-0400-001
33A-100-10
33-100-P
testing USOC, 568A and 568B cabling systems
■ Accurately verifies the continuity and sequence of
1, 2, 3, and 4 pair UTP and STP channels
■ Continuously-sequencing LED display provides a
diagnostic readout that immediately detects shorts,
opens, reversals and mis-wires at a glance
Low-impact termination force
Scissor style cut off
Wire cutting immobiliser switch
Light-weight impact resistant handle
Description
Termination Tool
SLT3S Shielded Tester with 9 Volt battery (U.K.)
SLT3 Carry Case
Fibre Solutions
FEATURES AND SPECIFICATIONS
Fibre Solutions
FEATURES AND SPECIFICATIONS
Molex Premise Networks Fibre Product Range
■ Molex Premise Networks manufactures some of the
■ Molex Premise Networks offer total fibre solutions,
most comprehensive fibre systems in the structured
cabling market. Incorporating a variety of connector
technology, such as; ST®, Duplex SC, MTRJ®, Escon®,
FDDI and FC.
ideal for either Backbone or To-The-Desk applications.
Range
■ Molex Premise Networks fibre range consists of;
Management Panels, Enclosures, Adapter Plates,
Connectors, Modules, Cable, Pre-Terminated
Solutions, Adapters, Patch Cords, Splicing Equipment,
Field Termination Connectors, Tool Kits and Testers .
Range
Sliding Fibre Management Panels
The Sliding FMP panel is a 1U Fibre Optic panel for 24
adapter ST, 12 adapter Duplex SC & 24 adapter MTRJ.
The Sliding FMP uses a sliding cable management tray
to enable easy front access & termination. The depth
adjustable mounting provides protection for the outgoing cable assemblies.
Tight Buffered Fibre Cable
■ 900µM Tight Buffered
■ Internal / Duct grade
■ Aramid Yarn Strength Member
■ ULSZH Sheath
■ Up to 24 adapter ST and MTRJ, and 12 adapter
Duplex SC and Shuttered Duplex SC
■ Depth Adjustable mounting
■ Self adhesive fibre cable management system in
loaded panels
■ Two points of strain relief for fibre cable
■ Ideal when easy access to the panel for adds,
changes or maintenance is required.
62.5/125µM
CFR-00341
CFR-00261
CFR-00262
CFR-00263
CFR-00264
CFR-00265
CFR-00343
50/125µM
CFR-00342
CFR-00271
CFR-00272
CFR-00273
CFR-00274
CFR-00275
CFR-00344
Description
2 Core
4 Core
6 Core
8 Core
12 Core
16 Core
24 Core
Tight Buffered Fibre Cable
■ 900µM Tight Buffered
■ Internal / Duct grade
■ Aramid Yarn Strength Member
■ ULSZH Sheath
■ E Glass Yarn - Rodent Resistant
62.5/125µM
CFR-00339
91.A1000
CFR-00250
91.A1010
91.A1020
91.A1030
CFR-00349
Description
Fully Loaded ST Patch Panel, Cable Accessory Kit - MM
Fully Loaded with ST adapters, Cable accessory kit - SM
Unloaded, 24 Port ST
Fully Loaded Shuttered Duplex SC Patch Panel, Cable Accessory Kit - MM
Fully Loaded Shuttered Duplex SC Patch Panel, Cable Accessory Kit - SM
Unloaded, 24 Port Duplex SC
Fully Loaded with 24 MTRJ adapters - MM & SM
Fibre Enclosures
Molex Premise Networks fibre optic enclosures are
designed to suit any installation requirements. They
range from the 12 fibre 601 box™ to the 72 fibre
Demarc cabinet. All enclosures contain features for fibre
management, splice holding, cable retention and
labelling. All common adapter types are catered for in
the form of configurable Euromod or Six-Pak Modules.
50/125µM
CFR-00340
CFR-00239
CFR-00240
CFR-00241
CFR-00242
CFR-00243
CFR-00350
9/125µM
CFR-00345
CFR-00346
n/a
CFR-00347
CFR-00348
n/a
n/a
Fibre Management Panels
The Fibre Management Panel is a 1U 19" Rack
mounted panel which allows direct mounting of the
connectors into the front panel. Available in 24 adapter
ST, 12 adapter Duplex SC and 24 adapter MTRJ versions all loaded panels come complete with a full range
of cable fixing accessories.
Order No.
30.A011G
30.A012G
30.A008G
30.A016G
30.A017G
30.A013G
RFR-00057
Order No.
30.A021G
30.A022G
30.A018G
RFR-00014
RFR-00015
30.A023G
RFR-00060
Description
2 Core
4 Core
6 Core
8 Core
12 Core
16 Core
24 Core
■ 19" rack compatible
■ Up to 24 adapter ST and MTRJ, and 12 adapter
Duplex SC and Shuttered Duple SC
■ Self adhesive fibre cable management system on
loaded panels
■ Two points of strain relief for incoming fibre cable
Description
Fully Loaded with ST adapters, cable accessory kit - MM
Fully Loaded with ST adapters, cable accessory kit - SM
Unloaded, 24 Port ST
Fully Loaded with Duplex SC adapters, cable accessory kit - MM
Fully Loaded with Duplex SC adapters, cable accessory kit - SM
Unloaded, 24 Port Duplex SC
Fully Loaded with 24 MTRJ adapters - SM & MM
Order No.
15.B033G
WFR-00022
WFR-00023
WFR-00025-02
WFR-00028-02
WFR-00031-02
■ ST, SC, & MTRJ variants available
■ Demarc Cabinet can contain up to 72 fibres
■ 601 Enclosure excepts Mechanical and Fusion
Splices
■ Security Lockable
Description
WM-12 Wall Mounted Enclosure
36P Patch/Splice Demarc Cabinet
72P Patch/Splice Demarc Cabinet
Fully Loaded 8 Port 601 Box, ST - MM
Fully Loaded 8 Port 601 Box, Duplex SC - MM
Fully Loaded 12 Port 601 Box, MTRJ - MM & SM
Termination Tooling
As fibre continues to migrate into the network the need
for frequent termination setups, involving few fibres,
will continue to increase. Traditional terminations that
require power ovens (traditional or pre-loaded epoxy)
or expensive tooling (splicing and crimping) are no
longer practical.
■
■
■
■
Low insertion loss of 0.32 dB Typ.
Operating Temperature - 10˚C to 60˚C
Complies with EIA/TIA 568A
Termination time - 2 minutes
The X-Press™ Termination Kits offer field terminable
connectors, that are cost effective and require
minimal tooling.
Order No.
91.A1230
91.A1270
AFR-00011
AFR-00006
601 Box
Description
X-Press Termination Kit, 12 ST Connectors
X-Press ST Termination toolkit
X-Press Termination Kit, 12 Simplex SC Connectors
X-Press SC Termination toolkit
Demarc Cabinet
Fibre Solutions
FEATURES AND SPECIFICATIONS
Fibre Adapters
Molex Premise Networks offer a comprehensive range of
adapters, both multimode and singlemode. These adapters
can be used in fibre management panels, wall enclosures
and wall outlets
Order No.
91.A0160
91.A0150
91.A1190
91.A1300
91.A0430
91.A0500
AFR-00126
■ ST, SC, MTRJ, Escon & FDDI variants available
■ Flange, Snap and Screw mount
■ For complete list of available adpaters speak to
Customer Services
Order No.
AFR-00150
AFR-00168
91.A0084
91.A0094
91.A0104
91.A0114
91.A0290
91.A0310
Order No.
MEU-00005-02
MEU-00009-02
MEU-00043-02
MEU-00044-02
■ Manufactured with a ceramic ferrule to ensure
quality and performance
■ ST, SC, MTRJ, Escon & FDDI variants available
■ For complete list of available connectors contact
Customer Services
Description
Field Terminable MTRJ, MM 62.5/125 Polishless Connector - Male
Field Terminable MTRJ, MM 50/125 Polishless Connector - Male
ST, MM, Polymeric nut
ST, MM, Metal nut
ST, MM, Metal nut - 90° boot
ST, MM, Metal nut - 900µm boot
SC, MM, Ceramic ferrule, 90˚ boot
SC, MM, Ceramic ferrule, 900µm boot
Fibre Patch Cords
We offer a comprehensive range of fibre optic cable
assemblies for singlemode and multimode applications.
Stocks are available in 1m, 2m, 3m, and 5m lengths,
see matrix below for Part No. configuration.
Connector Type, each end :
0 = No connector (pigtails)
1 = ST
2 = FDDI
3 = SC
4 = ESCON
5 = ST II
6 = ST with right angle boot
7 = SMA
Fibre Type :
5 = 50/125µm
6 = 62.5 / 125µm
8 = 9/125µm (SM)
Jacket Type :
2 = LSZH
Cable Type :
1 = Simplex
2 = Duplex
3 = 900µm
For example : To order a 1 metre Duplex LSZH 62.5 ST to SC Patch Cord, the part number would be 91.19.622.0010N
■ Angled 50x50mm module
■ Available with ST, shuttered Duplex SC/ST, shut-
tered Duplex SC, FDDI/ST, ESCON/ST, MTRJ &
Shuttered MTRJ Adapters
■ Multimode & Singlemode configuration
■ Compatible with 32mm deep trunking
■ Permits a 30mm bend radius
Jacket Colour
E = Dark Grey (50/125µm)
K = Yellow (9/125µm)
N = Orange (62.5/125µm)
Polishing Code :
0 = Standard
1 = SM, RL > 45dB
2 = SM, RL > 55dB
3 = SM, RL > 70dB
(angle polish)
Description
Euromod Angled ST/ST, MM, 50x50mm, 4 Adapters
Euromod Angled Shuttered Duplex SC/SC, MM, 50x50mm, 2 Adapters
Euromod Angled MTRJ/MTRJ, MM, 50x50mm, 2 Adapters
Euromod Angled Shuttered MTRJ/MTRJ, MM, 50x50mm, 2 Adapters
Enclosure Application Euromod Modules
Euromod is a modular range of outlets, plates &
connectors designed for use in different countries. In
addition to the existing range of Euromod modules for
use with copper media, Molex Premise Networks also
provides a range of solutions for Fibre Optic
applications. These modules are designed for use within
the WM-12 fibre enclosure.
Order No.
17-0423-02
17.A0162
17.A0202
MEU-00032-02
17.A0312
17.A0252
MEU-00033-02
91.xx.xx2.xxxxx
8 = SC with right angle boot
9 = SC Duplex
F = FC/PC
M = ModLink
L = LC
A = MTRJ - Male
B = MTRJ - Female
Lowest Number First
Angled Euromod Modules
Euromod is a modular range of outlets, plates and
connectors designed for use in different countries. In
addition to the existing range of Euromod modules for
use with copper media, Molex Premise Networks also
provides a range of solutions for Fibre Optic
applications.
In combination with the existing Euromod product
range and Fibre Management Back Box these angled
modules will provide a unique fibre to the desk
solution.
Description
ST Adapter, MM, Metal body
ST Adapter, MM, Polymeric body
Shuttered Duplex SC/Duplex SC, MM, Flange mount
Shuttered Duplex SC/Duplex SC, MM, Snap mount
Duplex SC/Duplex SC, MM, Flange mount
Duplex SC/Duplex SC, MM, Snap mount
MTRJ/MTRJ, MM & SM, Flange mount
Fibre Connectors
Molex Premise Networks offer a comprehensive range
of connectors for LAN applications. The connectors are
available for singlemode or multimode applications.
Fibre Solutions
FEATURES AND SPECIFICATIONS
■ 25x50mm & 50x50mm modules
■ Euromod compatible
■ Available with ST, Duplex SC,
Shuttered Duplex SC and MTRJ adapters
■ Multimode & Singlemode configuration
■ Other variants available for more information
contact Customer Services
Description
Euromod ST,MM fibre module, 25x50mm, 2 Adapters
Euromod Duplex SC,MM fibre module, 25x50mm, 1 Adapter
Euromod Duplex Shuttered SC, MM fibre module, 25x50mm, 1 Adapter
Euromod MTRJ, MM & SM fibre module, 25x50mm, 2 Adapters
Euromod ST/ST, MM fibre module, 50x50mm, 6 Adapters
Euromod Duplex SC/SC, MM fibre module, 50x50mm, 3 Adapters
Euromod MTRJ, MM & SM fibre module, 50x50mm, 4 Adapters
Fibre Management Back Box
The Fibre Management Back Box provides accommodation for direct termination or splicing of up to eight
fibres and is designed to maintain the minimum bend
radius requirements for fibre optic cable when used in
conjunction with Euromod Angled Modules.
■ Fits inside 32mm UK standard double gang
backbox for surface mount applications
■ Up to 8 fusion splices can be accommodated
securely
■ Provides storage for up to 8m of 900µM tight
buffered fibre
■ Correct bend radius maintained when used with
This product is also suitable for applications which
require copper modules, and can accommodate up to2
flat Euromod PowerCat or secondary voice modules as
well as 4 fibres. It is packaged complete with threaded
inserts for trunking applications and adhesive strip for
mounting in a surface mount backbox.
angled modules
■ No additional backbox required for trunking
applications
■ Mixed media capability
Length Metres
Order No.
WFR-00044-02
Description
Fibre Management Back Box
Fibre Solutions
FEATURES AND SPECIFICATIONS
Cable Management
FEATURES AND SPECIFICATIONS
Molex Premise Networks Cable Management
■ Cable Management is an important part of any
installation. Combining aesthetics with functionality, the
Molex Premise Networks range of rack mountable cable
management products offer cable management with
minimal effort.
■ Molex Premise Networks offer a extensive range of
cabinet solutions from wall and floor mounted cabinets
to the innovative Universal Patching Frame.
Range
Fibre Adapter Plates
Molex Premise Networks provides a simple solution which
allows you to field configure many of its fibre optic
products using 6-Pak adapter plate.
■
■
■
■
■
The plates are loaded with high quality Duplex SC, ST,
MTRJ, FC, FDDI, and ESCON adapters. No tools are
required as the plates install with a simple snap rivet,
making installation and changes simple.
Order No.
AFR-00112
AFR-00115
AFR-00119
AFR-00159
AFR-00121
Available with ST, Duplex SC and MTRJ adapters
Multimode & Singlemode configuration
For use within the Demarc Cabinet
Simple snap rivet installation
Other variants available for more information
contact Customer Services
Description
6-Pak ST, MM
ST to Duplex SC, MM
Duplex SC, MM (Beige)
6-Pak MTRJ, SM/MM
Blanks - 4/pkg
■ Accepts up to 12 Fusion splices or 10 Mechanical
Splicing Accessories
If splicing is your preferred method of terminating fibre,
Molex Premise Networks can supply all the consumables
necessary.
splices
■ For use within fixed and sliding Fibre Management
Panels, FMS Plus and the Demarc cabinet
The splice tray is suitable for fusion and mechanical splices,
and fits neatly in our patch panels and enclosures.
Order No.
91.A1150
91.A1160
91.B0110
91.B0120
KFR-00008
KFR-00009
Description
Fibre Fusion Splice Tray with Cover, Including 2 fusion splice holders
Fibre Splice Tray with Cover, Including 2 mechanical splice holders
Mechanical Splice MM
Mechanical Splice SM
45mm Splice Protector
61mm Splice Protector
Optical Loss Tester
Molex Premise Networks’ FLT4™ Optical Loss Test Set is
an easy to use and inexpensive solution for attenuation
testing of multimode systems. The FLT4 test set consists
of a dual wavelength optical power source and optical
power meter in a rugged plastic carry case complete
with ST adapter cap and operation manual. In addition,
each optical source and optical power meter features
rubber protective boots to prevent accidental damage
or abuse to the units.
Order No.
TFR-00002
AFR-00096
■
■
■
■
■
■
■
■
■
Low cost
Loss measurement
Hand held units
Field portable
Units housed in rubber protective boots
Rugged carry case
User friendly
Battery operated
“Zero Out” option
Description
FLT4 Optical Loss Test Set
Replacement ST Adapter Cap
ST® and STII®, ESCON® and MTRJ® are registered trademark of Lucent Technologies, IBM and AMP Technologies respectively.
■ 19" Rack Mountable 1U and 2U
■ Styling complements Molex Patch Panel Range
■ Graphite (standard) and RAL 7032 (beige) colour
Cable Management
Ring Run Panels come complete with flexible plastic
rings which are designed to aid installations by
providing a speedy method of cable dressing. Blank
Panels provide the in-fill for the tidy looking cabinet
installation. Cable tidy brush panel offers the user the
ability to hide unsightly cables behind the brush, but
with the convenience of access to these cables if
necessary.
Order No.
25.A013G
25.A016G
25.A018G
25.A019G
25.A029G
25.A046G
25.A047G
finishes available
Description
2U Ring Run Panel (5 Rings)
1U Ring Run Panel (5 Rings)
1U Blank Panel
2U Blank Panel
1U Cable Tidy Brush Panel
2U Ring Run Cover (6 Pack)
1U Ring Run Cover (6 Pack)
Universal Patching Frame™ (UPF)
The universal patching frame is 42U high and available
in a 42 arm version. The tubular construction also
ensures that the minimum bend radius, as specified by
ISO/IEC 11801 and ANSI/TAI/EIA-568-A, is not
exceeded preventing cable from being damaged or
performance impaired.
Conventional cable trays have been replaced with an
open 50mm x 25mm steel wire mesh, to give finger
through access to assist in tracing patch cord paths and
tying off. Equipment mounting angles are secured by
bolts which allow for installation of 19” or 530mm
patch panels. Fixings are provided for optional, rear
mounting verticals. The frame can be totally enclosed
with the addition of side covers and front and rear
doors.
Order No.
UPF-00021
UPF-00002
UPF-00003
UPF-00004
UPF-00005
UPF-00006
UPF-00007
UPF-00008
UPF-00009
UPF-00010
UPF-00011
UPF-00012
UPF-00013
UPF-00014
UPF-00022
UPF-00016
UPF-00018
UPF-00019
■ Cable-friendly tubular construction ensures system
integrity
■ Open frame maximises access for fast and simple
installation
■ Horizontal arms enhance cable management
■ 19 inch standard allows active equipment and
cabling to be accommodated in the same cabinet
■ Minimal footprint saves space
■ Lockable doors option for added security
■ Baying kit allows frames to be linked together in
■
■
■
■
large installations
Clean earth bus bar for shielded applications
Range of accessories (see specification below)
Suitable for copper and fibre applications
Slip joint construction allows the frame to be
delivered in flat-pack and quickly assembled
Description
42u Open frame assy - 42 arm (Product packaged in 2 cartons)
Front sill assy kit (1)
Glass door assy (2 halfwidth doors)
Side cover - left
Side cover - right
Rear door assy kit
Top cover ventilated
Fan tray - c/w 2 fans
Fan tray - c/w 4 fans
Equipment mounting angles (2)
Baying kit
Bus bar assy
Service shelf (3)
Modem shelf
Power dist unit - 10 way vert (UK)
Power dist unit - 6 way hor (UK)
Fixed shelf - 400mm deep
Fixed shelf - 600mm deep
The information in this document is subject to change without notice. Molex Premise Networks assumes no responsibility for any errors that may appear in this document
■ The basic design principle of the Universal Patching
Frame (UPF) is to provide a simple cable loom support
with maximum accessibility, together with a universal
patch panel mounting facility.
Range
EMEA Headquarters
Hampshire, England
Tel: 44 (0)1489 572 111
Fax: 44 (0)1489 559 106
France
Paris, France
Tel: 33 (0)1 39 30 59 90
Fax: 33 (0)1 39 30 59 99
Africa
Midrand, South Africa
Tel: 27 11 314 1010
Fax: 27 11 314 1270
Nordic
Stockholm, Sweden
Tel: 46 8 594 211 25
Fax: 46 8 594 211 20
Corporate Headquarters
Hudson, NH 03051 U.S.A.
Tel: 603 324 0200
Fax: 603 577 8770
Visit our Web site at http: // www.molexpn.co.uk
Order No. UK-SC002
Printed in UK/7k/JB/JB/2001.6
©2001, Molex