elite® series - Innovation Group

HEAT PUMP OUTDOOR UNITS
XP16
ELITE®
SERIES
R−410A − Two−Stage Compressor
ENGINEERING DATA
Bulletin No. 210463
May 2008
Supersedes June 2007
SEER − up to 17.0
2 to 5 Tons
Cooling Capacity − 23,200 to 58,500 Btuh
Heating Capacity − 21,200 to 54,000 Btuh
MODEL NUMBER IDENTIFICATION
X P 16 − 036 − 230 − 2
Refrigerant Type
X = R−410A
Unit Type
P = Heat Pump
Series
Minor Revision Number
Voltage
230 = 208/230V−1ph−60hz
Nominal Cooling Capacity
024 = 2 tons
036 = 3 tons
048 = 4 tons
060 = 5 tons
FEATURES
CONTENTS
ARI Indoor Coil / Air Handler Substitutions . . . . . . Page 8
ARI Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 9−13
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 2−4
Field Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Indoor Coil/Air Handler Substitution . . . . . . . . . . . . Page 8
Installation Clearances . . . . . . . . . . . . . . . . . . . . . . . Page 7
Model Number Identification . . . . . . . . . . . . . . . . . . Page 1
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Sound Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Equipment Warranty
Compressor − limited warranty for ten years in
residential installations and five years in non-residential
installations.
All other covered components − five years in
residential installations and one year in non-residential
installations.
Refer to Lennox Equipment Limited Warranty certificate
included with unit for specific details.
Approvals
Certified in accordance with USE certification program
which is based on ARI Standard 210/240−2005.
Sound rated in Lennox reverberant sound test room in
accordance with test conditions included in ARI Standard
270−95.
Tested in the Lennox Research Laboratory environmental
test room.
Rated according to U.S. Department of Energy (DOE) test
procedures.
Heat pumps and components within bonded for
grounding to meet safety standards for servicing required
by UL and CEC.
Units are UL and ULC listed.
ISO 9001 Registered Manufacturing Quality System.
ENERGY STAR® certified units are designed to use less
energy, help save money on utility bills, and help protect
the environment.
ApplicationS
SEER up to 17.0.
Heating COP up to 3.82.
HSPF (region IV) up to 8.70.
2 through 5 ton.
Single phase power supply.
Sound levels as low as 74 dB.
Vertical air discharge allows concealment behind shrubs
at grade level or out of sight on a roof.
Designed for applications with remotely located indoor air
handlers or add−on indoor coils with FM21® dual fuel
furnace control. See FM21® bulletin, Controls section.
Also see Indoor Coils and Air Handlers sections for indoor
unit data.
Units shipped completely factory assembled, piped, and
wired. Each unit is test operated at the factory insuring
proper operation.
Installer must set heat pump, connect refrigerant lines,
and make electrical connections to complete job.
For expanded ratings, see www.lennoxdavenet.com.
XP16 − 2 to 5 Ton Heat Pump / Page 2
K
B
J
C
I
D
H
L
F
E
G
M
REFRIGERATION SYSTEM
Refrigerant
Non−chlorine, ozone friendly, R−410A.
Unit is factory pre−charged. See
Specification table.
Total system refrigerant charge is dependant on outdoor
unit size, indoor unit size and refrigerant line length. Refer
to charging procedures in the Installation Instructions to
determine correct amount of charge required.
B
Outdoor Coil Fan
Direct drive fan moves large air volumes uniformly
through entire condenser coil for high refrigerant cooling
capacity.
Vertical air discharge minimizes operating sounds and
eliminates damage to lawn and shrubs.
Fan motor has sleeve bearings and is inherently
protected.
Motor totally enclosed for maximum protection from
weather, dust and corrosion
Fan guard constructed of corrosion−resistant PVC
(polyvinyl chloride) coated steel.
Fan service access accomplished by removal of fan
guard.
FEATURES
REFRIGERATION SYSTEM (CONTINUED)
C Copper Tube/Enhanced Fin Coil
D
E
F
G
H
Lennox designed and fabricated coil.
Ripple−edged aluminum fins.
Copper tube construction.
Lanced fins provide maximum exposure of fin surface to
air stream resulting in excellent heat transfer.
Fin collars grip tubing for maximum contact area.
Inverted coil circuiting prevents ice buildup at coil base in
low ambients. Discharge gas enters bottom of coil during
defrost and heat of refrigerant flows counter to water
drainage resulting in extremely clean and unobstructed
fins and tubes.
Fin spacing allows rapid and complete water drainage.
Flared shoulder tubing connections/silver soldering
construction.
Coil is factory tested under high pressure to insure
leakproof construction.
Entire coil is accessible for cleaning.
Expansion Valve − Outdoor Unit
Designed and sized specifically for use in heat pump
system.
Sensing bulb is located on the line between reversing valve
and the coil thus sensing suction temperature in any cycle.
Factory installed and piped.
Discharge Temperature Switch
Shuts off unit if operating conditions cause the
compressor discharge line temperature to rise above
setpoint.
Protects compressor from excessive pressure /
temperature.
Automatic reset when temperature drops below setpoint.
High Pressure Switch
Shuts off unit if abnormal operating conditions cause the
discharge pressure to rise above setting.
Protects compressor from excessive condensing
pressure.
Manual reset.
Low Pressure Switch
Shuts off unit if suction pressure falls below setting.
Provides loss of charge and freeze-up protection.
Automatic reset.
Hi-Capacity Liquid Line Drier
Factory installed in the liquid line, the drier traps moisture
or dirt that could contaminate the refrigerant system.
100% molecular−sieve bead type drier.
Reversing Valve
4-way interchange reversing valve effects a rapid change
in direction of refrigerant flow resulting in quick
changeover from cooling to heating and vice versa.
Valve operates on pressure differential between outdoor
unit and indoor unit of the system. Factory installed.
OPTIONS
Expansion Valve Kits
Must be ordered extra and field installed on certain indoor
units. See ARI Ratings tables.
Chatleff style fitting.
Freezestat
Installs on or near the discharge line of the evaporator or
on the suction line.
Senses suction line temperature and cycles the
compressor off when suction line temperature falls below
it’s setpoint.
Opens at 29°F and closes at 58°F.
Refrigerant Line Kits
Refrigerant lines (suction & liquid) are shipped
refrigeration clean. Lines are cleaned, dried, pressurized,
and sealed at factory.
Suction line fully insulated.
L15 lines are stubbed at both ends.
See Specifications table for selection.
Not available for −060 model and must be field fabricated.
COMPRESSOR
I Copeland Scroll Ultra Techt Two−Stage Compressor
Compressor features high
efficiency with uniform
suction flow, constant Slider
discharge flow and high
Ring
volumetric efficiency and
quiet operation.
Compressor consists of
Internal
two involute spiral scrolls solenoid
matched
together
to
generate a series of
crescent
shaped
gas
pockets between them.
During compression, one
scroll remains stationary
while the other scroll orbits
around it.
Gas is drawn into the outer
pocket, the pocket is sealed as the scroll rotates.
As the spiral movement continues, gas pockets are
pushed to the center of the scrolls. Volume between the
pockets is simultaneously reduced.
When pocket reaches the center, gas is now at high
pressure and is forced out of a port located in the center
of the fixed scrolls. During
Slider Ring
compression,
several
pockets are compressed
simultaneously resulting in
a
smooth
continuous
compression cycle.
Continuous flank contact,
maintained by centrifugal
force,
minimizes
gas
leakage and maximizes
Fixed scroll
efficiency.Internal solenoid
Scroll compressor is tolerant to the effects of slugging
and contaminants. If this occurs, scrolls separate,
allowing liquid or contaminants to to be worked toward
the center and discharged.
On the fixed scroll there are two bypass ports in the first
suction pocket. On the outside of the fixed scroll there is a
slider ring" that is controlled by an internal solenoid that
will rotate and cover the bypass ports. When the
thermostat calls for first−stage cooling, the bypass ports
are open and the compressor operates at 67% capacity,
creating more cost−effective and efficient compressor
operation. The bypassed refrigerant is returned to the
compressor housing through the bypass ports. When
the thermostat calls for second−stage cooling, the
internal solenoid is energized, the slider ring rotates and
covers the bypass ports, and the compressor operates
at full capacity.
Low gas pulses during compression reduces
operational sound levels.
Compressor motor is internally protected from
excessive current and temperature.
Compressor is installed in the unit on specially
formulated, resilient rubber mounts for better sound
dampening and vibration free operation.
XP16 − 2 to 5 Ton Heat Pump / Page 3
FEATURES
COMPRESSOR (CONTINUED)
Crankcase Heater
Crankcase heater prevents migration of liquid refrigerant
into compressor and ensures proper compressor
lubrication.
CONTROLS
J Defrost Control
Solid-state control furnished as standard.
Gives a demand defrost cycle whenever system heating
performance falls below optimum levels. The sensing
element on coil determines when defrost cycle is required
and when to terminate cycle.
Anti−short cycle (5 minutes) incorporated into the board.
Diagnostic LED’s furnished as an aid in troubleshooting.
Conveniently located in control box.
OPTIONS
ComfortSenset 7000 Touchscreen Thermostat
Electronic 7−day, universal,
multi−stage, programmable,
touchscreen thermostat.
4 Heat/2 Cool.
Auto−changeover.
Controls humidity during
cooling mode.
Offers
enhanced
capabilities
including
humidification / dehumidification / dewpoint measurement
and control, Humiditrol® control, and equipment
maintenance reminders.
Easy−to−use, menu driven thermostat with a back−lit, LCD
touchscreen.
Remote outdoor temperature sensor (optional) allows the
thermostat to display outdoor temperature. Required in
dual fuel and Humiditrol® applications.
See the ComfortSenset 7000 Engineering Handbook
bulletin in the Controls section for more information.
Compressor Hard Start Kit
Single−phase units are equipped with a PSC compressor
motor.
This type of motor normally does not need a potential
relay and start capacitor.
In conditions such as low voltage, kit may be required to
increase the compressor starting torque.
Hard start kit is required in applications where the supply
voltage is less than 230V.
Indoor Blower Off Delay Relay
Delays the indoor blower−off time during the cooling cycle.
See ARI Rating Tables for usage.
Indoor Blower Speed Relay Kit
Relay kit provides optimum humidity control conditions by
automatically reducing indoor blower speed during
continuous fan or first−stage compressor operation.
Low Ambient Kit
Heat pump will operate in the cooling mode satisfactorily
down to 45_F outdoor air temperature without any additional
controls.
Kit can be added in the field enabling unit to operate
properly down to 30_F.
A Freezestat should be installed on compressors
equipped with a low ambient kit.
A Compressor Low Ambient Cut−Off should be added to
terminate compressor operation below recommended
operation conditions (on/off operation, 30°F or modulating
operation, 0°F.
XP16 − 2 to 5 Ton Heat Pump / Page 4
Mild Weather Kit
Heat pump units operate satisfactorily in the heating
mode at outdoor air temperatures up to 75_F.
Mild Weather Kit can be field installed, allowing heating
operation above 75_F.
Monitor Kit − Service Light
Contains ambient compensating thermistor and service
light thermostat.
For use with thermostats requiring input for indicator
lights.
Outdoor Thermostat Kit
An outdoor thermostat can be used to lock out some of the
electric heating elements on indoor units where two−stage
control is applicable.
Outdoor thermostat maintains the heating load on the low
power input as long as possible before allowing the full
power load to come on the line.
Thermostat kit and mounting box must be ordered extra.
K Cabinet
Heavy−gauge steel construction
Pre−painted cabinet finish.
Pre−painted base section.
Control box is conveniently located with all controls
factory wired.
Large removable panel provides service access.
Drainage holes are provided in base section for moisture
removal.
High density polyethylene unit support feet raise the unit off
of the mounting surface, away from damaging moisture.
L SmartHinget Louvered Coil Protection
Steel louvered panels
provides complete coil
protection.
Panels are hinged to
allow easy cleaning
and servicing of coils.
Panels
may
be
completely removed.
Interlocking tabs and
slots assure tight fit on
cabinet.
M
Refrigerant Line Connections, Electrical Inlets and
Service Valves
Vapor and liquid lines are located on corner of unit cabinet
and are made with sweat connections. See dimension
drawing.
Fully serviceable brass service valves prevent corrosion
and provide access to refrigerant system. Vapor valve can
be fully shut off, while liquid valve may be front seated to
manage refrigerant charge while servicing system.
Refrigerant line connections and field wiring inlets are
located in one central area of the cabinet. See dimension
drawing.
SPECIFICATIONS
Model No.
Nominal Tonnage
Liquid line (o.d.) − in.
Connections
(
(sweat)
t)
Vapor line (o.d.) − in.
1
Refrigerant
R−410A charge furnished
Net face area − sq. ft. Outer coil
Outdoor
C il
Coil
Inner coil
Tube diameter − in.
No. of rows
Fins per inch
Diameter − in.
Outdoor
F
Fan
No. of blades
Motor hp
Cfm
Rpm
Watts
Shipping Data − lbs. 1 pkg.
ELECTRICAL DATA
Line voltage data − 60hz
2 Maximum overcurrent protection (amps)
3 Minimum circuit ampacity
Rated load amps
Compressor
p
Locked rotor amps
Power factor
Full load amps
Outdoor Coil
F Motor
Fan
M t
Locked rotor amps
General
D t
Data
XP16−024
2
3/8
3/4
7 lbs. 13 oz.
13.22
12.65
5/16
2
22
18
3
1/10
2215
1040
145
219
XP16−036
3
3/8
7/8
10 lbs. 4 oz.
18.67
18.0
5/16
2
22
22
4
1/6
3150
844
215
265
XP16−048
4
3/8
7/8
15 lbs. 7 oz.
24.5
23.64
5/16
2
22
22
4
1/4
3980
836
305
309
XP16−060
5
3/8
1−1/8
11 lbs. 7 oz.
24.93
24.14
5/16
2
22
26
3
1/3
4380
850
280
345
4 208/230V−1ph
4 208/230V−1ph
4 208/230V−1ph
4 208/230V−1ph
20
14.0
10.25
52
0.98
1.1
2
35
22.0
16.67
82
0.99
1.1
2.1
45
28.2
21.15
96
0.99
1.7
3.1
60
33.9
25.87
118
0.99
1.8
2.9
OPTIONAL ACCESSORIES − must be ordered extra
ComfortSenset 7000 Thermostat
Y0349
S
S
S
S
Outdoor Temperature Sensor − for
ComfortSenset 7000 Thermostat
X2658
S
S
S
S
10J42
81J69
45F08
93G35
50A93
40K58
58M81
68M04
33M07
76F53
56A87
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Compressor
p
Hard Start Kit − Required
q
i applications
in
li ti
with
ith lless th
than 230V
Compressor Low Ambient Cut−Off
3/8 in. tubing
Freezestat
5/8 in. tubing
Indoor Blower Speed Relay Kit
Indoor Blower Off Delay Relay
Low Ambient Kit
Mild Weather Kit
Monitor Kit − Service Light
Thermostat
Outdoor
Thermostat
Mounting Box
31461
Kit
L15−41−20
L15−41−40
Refrigerant
L15−41−30
L15−41−50
Line Sets
L15−65−30
L15−65−40
L15−65−50
S
Field Fabricate
S
NOTE − Extremes of operating range are plus 10% and minus 5% of line voltage.
1
Refrigerant charge sufficient for 15 ft. length of refrigerant lines.
2
HACR type breaker or fuse.
3
Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements.
4
Hard start kit is required in applications where the supply voltage is less than 230V.
XP16 − 2 to 5 Ton Heat Pump / Page 5
DIMENSIONS − INCHES (MM)
SUCTION LINE
CONNECTION
LIQUID LINE
CONNECTION
TOP VIEW
C
B
DISCHARGE AIR
LIQUID LINE
CONNECTION
ELECTRICAL
INLETS
A
SUCTION LINE
CONNECTION
2 (51)
4−3/4
4−1/4(108) (121)
1 (25)
SIDE VIEW
UNIT SUPPORT
FEET
END VIEW
UNIT SUPPORT
FEET
8−1/2
(216)
8−3/4
(222)
9−1/2
(241)
D
8−1/4
(210)
E
K
J
13−1/2
(343)
5−1/2
(140)
XP16−024 BASE SECTION
B
H
G
F
XP16−036 TO −060 BASE SECTION
Model No
No.
A
in. mm
C
in.
mm
in.
mm
XP16−024
31 787
27
686
28
711
XP16−036
35 889 30−1/2 775
35
889 13−7/8 352 7−3/4 197 3−1/4 83 27−1/8 689 3−5/8
92
4−1/2 114 20−5/8 524
XP16−048
45 991 30−1/2 775
35
889 13−7/8 352 7−3/4 197 3−1/4 83 27−1/8 689 3−5/8
92
4−1/2 114 20−5/8 524
XP16−060
39 991 35−1/2 902 39−1/2 1003 16−7/8 429 8−3/4 222 3−1/8 79 30−3/4 781 4−5/8
XP16 − 2 to 5 Ton Heat Pump / Page 6
D
in.
E
mm
−−−
in.
F
mm
−−−
in.
G
mm
−−−
in.
H
mm
−−−
in.
J
mm
−−−
in.
K
mm
−−−
117 3−3/4
in.
mm
−−−
95 26−7/8 683
INSTALLATION CLEARANCES
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍ
NOTES:
See NOTES
Service clearance of 30 in. (762 mm) must be maintained on one
of the sides adjacent to the control box.
Clearance to one of the other three sides must be 36 in. (914 mm).
See
NOTES
See
NOTES
See NOTES
Clearance to one of the remaining two sides may be 12 in. (305
mm) and the final side may be 6 in. (152 mm).
A clearance of 24 in. (610 mm) must be maintained between two
units.
Control
Box
48 in. (1219 mm) clearance required on top of unit.
OUTDOOR SOUND DATA
1Sound
Octave Band Sound Power Levels dBA, re 10−12 Watts
1 Unit
U it
63
125
250
500
1000
2000
4000
8000
R ti
Rating
Number
(dB)
XP16-024
79.0
72.0
70.0
69.5
68.5
63.5
58.0
56.5
74
XP16-036
80.5
70.5
71.5
71.0
68.5
63.5
58.5
53.5
76
XP16-048
81.0
72.5
71.5
73.0
70.5
66.0
60.5
58.5
76
XP16-060
80.5
72.5
73.5
77.5
72.5
67.0
62.5
58.5
78
Center Frequency − HZ
Model No.
NOTE − the octave sound power data does not include tonal correction.
1 Tested according to ARI Standard 270-95 test conditions.
FIELD WIRING
DISCONNECT
SWITCH
(By Others)
B
OPTIONAL
ELECTRIC
HEAT
A
OPTIONAL
OUTDOOR
THERMOSTAT
LENNOX
OUTDOOR
UNIT
LENNOX
INDOOR UNIT
A Two Wire Power (see Electrical Data)
B Two or Three Wire Power (size to heater capacity)
DISCONNECT
SWITCH
(By Others)
C Twelve Wire Low Voltage 18 ga. minimum
Fourteen Wire Low Voltage with Optional Outdoor Thermostat
D Eight Wire Low Voltage 18 ga. minimum
THERMOSTAT
(Optional)
Ten Wire Low Voltage with Optional Outdoor Thermostat
Field Wiring Not Furnished D
C
All wiring must conform to NEC or CEC and local electrical codes.
XP16 − 2 to 5 Ton Heat Pump / Page 7
ARI RATINGS − INDOOR COIL / AIR HANDLER SUBSTITUTION
Substituting Coils in the ARI Tables
Most R−22 and R−410A indoor coils and air handlers are
the same except for the factory installed expansion
device. C33 coils can be used in place of the CX34 coils,
CB26UH−R, CB27UH, and CB30M air handlers can be
used in place of the CBX26UH, CBX27UH, CBX32M and
CBX32MV, respectively.
UP−FLOW COILS
The expansion device is based on the size of the outdoor
unit. The factory installed RFC or TXV on the
C33/CB26UH−R/CB27UH/CB30M must be replaced to
correspond to the outdoor unit. The correct TXV’s are:
2−3 ton heat pumps
49L24
4−5 ton heat pumps
91M02
Example:
A four−ton heat pump is being installed. The ARI table
shows that CBX32M−048 is a matching air handler. A
CB30M−51 with a 91M02 TXV can be used in its place.
AIR HANDLERS
R−410A
CX34−18/24A−6F
CX34−18/24B−6F
CX34−18/24C−6F
CX34−19A−6F
CX34−25A−6F
CX34−25B−6F
CX34−30A−6F
CX34−30B−6F
CX34−30C−6F
CX34−31A−6F
CX34−31B−6F
CX34−36A−6F
CX34−36B−6F
CX34−36C−6F
CX34−38A−6F
CX34−38B−6F
CX34−42B−6F
CX34−43B−6F
CX34−43C−6F
no equivalent
CX34−44/48B−6F
CX34−44/48C−6F
CX34−49C−6F
CX34−50/60C−6F
CX34−60D−6F
CX34−62C−6F
CX34−62D−6F
XP16 − 2 to 5 Ton Heat Pump / Page 8
R−22
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
C33−24A−2
C33−24B−2
C33−24C−2
C33−19A−2
C33−25A−2
C33−25B−2
C33−30A−2
C33−30B−2
C33−30C−2
C33−31A−2
C33−31B−2
C33−36A−2
C33−36B−2
C33−36C−2
C33−38A−2
C33−38B−2
C33−42B−2
C33−43B−2
C33−43C−2
=
=
=
=
=
=
=
C33−44C−2
C33−48B−2
C33−48C−2
C33−49C−2
C33−50/60C−2
C33−60D−2
C33−62C−2
C33−62D−2
R−410A
CBX26UH−018
CBX26UH−024
CBX26UH−030
CBX26UH−036
CBX26UH−042
CBX26UH−048
CBX26UH−060
CBX27UH−018/024
CBX27UH−030
CBX27UH−036
CBX27UH−042
CBX27UH−048
CBX27UH−060
CBX32M−018/024
CBX32M−030
CBX32M−036
CBX32M−042
CBX32M−048
CBX32M−060
CBX32MV−(all)
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
R−22
CB26UH−018−R
CB26UH−024−R
CB26UH−030−R
CB26UH−036−R
CB26UH−042−R
CB26UH−048
CB26UH−060−R
CB27UH−018/024
CB27UH−030
CB27UH−036
CB27UH−042
CB27UH−048
CB27UH−060
CB30M−21/26
CB30M−31
CB30M−41
CB30M−46
CB30M−51
CB30M−65
no equivalent
ARI RATINGS
1 ARI
Standard 210/240 Ratings
Efficiency
Total Watts
Capacity − Btuh
High
Low
Cooling Temp
Temp
Temp. Temp.
Heating Heating SEER EER
COP
HSPF
IV
I d
Indoor
Unit
U it Model
M d l No.
N
High Low High Low
Cool Heat Heat Heat Heat
V
XP16−024
2 TON
Air Handlers
Air Handlers
23,800 21,800 13,000 15.70 11.70 8.00 6.70 2025 1810 1600 3.52 2.38 4 CBX32MV−018/024 (Multi−Position)
23,400 22,000 13,300 14.20 11.00 7.70 6.70 2110 1910 1695 3.38 2.30
Expansion
Device
3 CBX32M−018/024
(Multi−Position)
Factory TXV
Factory TXV
24,000 22,200 13,400 15.00 11.20 7.70 6.70 2130 1885 1685 3.46 2.32 CBX26UH−018 (Up−Flow / Horizontal)
Factory TXV
24,200 21,600 12,900 16.00 12.00 8.20 7.00 1970 1725 1525 3.66 2.48 4,5 CBX32MV−024/030 (Multi−Position)
Factory TXV
24,200 21,600 12,800 16.00 12.20 8.20 7.00 1960 1715 1515 3.70 2.48
4 CBX27UH−024
(Up−Flow/Horizontal)
Factory TXV
24,200 22,000 13,300 15.00 11.50 8.00 6.70 2095 1845 1645 3.50 2.36 CBX26UH−024 (Up−Flow / Horizontal)
Factory TXV
24,400 21,600 12,800 17.00 12.50 8.50 7.20 1940 1680 1490 3.76 2.52
4 CBX27UH−030
24,800 22,000 13,000 17.00 12.20 8.50 7.20 1995 1685 1515 3.82 2.52
4 CBX32MV−036
(Up−Flow/Horizontal)
24,200 22,200 13,400 15.20 11.50 8.00 7.00 2105 1820 1635 3.58 2.40 4 CBX32M−030 (Multi−Position)
(Multi−Position)
Up−Flow Indoor Coils
Up−Flow Coils
23,600 22,200 13,400 14.00 11.00 7.70 6.70 2145 1910 1700 3.40 2.30 3 CX34−38A/B−6F
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Up−Flow Indoor Coils + Furnaces
Up−Flow Coils + Furnaces
4 G61MPV−36C−090
23,800 21,400 12,700 16.00 12.00 7.70 6.70 1975 1800 1585 3.48 2.34 CX34−36C−6F
Factory TXV
23,800 21,400 12,700 16.00 12.00 7.70 6.70 1975 1800 1585 3.48 2.34 CX34−36C−6F
4 G71MPP−36C−090
Factory TXV
23,800 21,400 12,800 16.00 11.70 7.70 6.70 2000 1810 1600 3.46 2.34 CX34−36A−6F
4 G60UHV−36A−070
Factory TXV
23,800 21,400 12,800 16.00 11.70 7.70 6.70 2000 1810 1600 3.46 2.34 CX34−36B−6F
4 G61MPV−36B−070
Factory TXV
23,800 21,400 12,800 16.00 11.70 7.70 6.70 2000 1810 1600 3.46 2.34 CX34−36B−6F
4 G71MPP−36B−070
Factory TXV
24,000 21,400 12,700 16.20 12.00 7.70 6.70 2000 1840 1620 3.40 2.30 CX34−25A−6F
4 G60UHV−36A−070
Factory TXV
24,000 21,400 12,700 16.20 12.00 7.70 6.70 2000 1840 1620 3.40 2.30 CX34−25B−6F
4 G61MPV−36B−070
Factory TXV
24,000 21,400 12,700 16.20 12.00 7.70 6.70 2000 1840 1620 3.40 2.30 CX34−25B−6F
4 G71MPP−36B−070
Factory TXV
24,000 21,400 12,700 16.20 12.00 8.00 6.70 1975 1785 1575 3.52 2.36 CX34−36B−6F
4 G60UHV−36B−090
Factory TXV
24,000 21,400 12,800 16.00 11.70 7.70 6.70 2010 1845 1625 3.40 2.30 CX34−25B−6F
4 G61MPV−36B−045
Factory TXV
24,000 21,600 12,900 16.00 11.70 7.70 6.70 2010 1815 1605 3.48 2.36 CX34−36B−6F
4 G61MPV−36B−045
Factory TXV
24,200 21,200 12,700 16.20 12.20 7.70 6.70 1970 1815 1595 3.42 2.34 CX34−25B−6F
4 G60UHV−36B−090
Factory TXV
24,400 21,400 12,700 16.20 12.00 7.70 6.70 2005 1840 1620 3.40 2.30 CX34−31B−6F
4 G61MPV−36B−070
Factory TXV
24,400 21,400 12,700 16.20 12.00 7.70 6.70 2005 1840 1620 3.40 2.30 CX34−31B−6F
4 G71MPP−36B−070
Factory TXV
24,400 21,400 12,700 16.20 12.00 7.70 6.70 2005 1840 1620 3.40 2.30 CX34−31A−6F
4 G60UHV−36A−070
Factory TXV
24,400 21,400 12,800 16.20 12.00 7.70 6.70 2015 1845 1625 3.40 2.30 CX34−31B−6F
4 G61MPV−36B−045
Factory TXV
24,400 21,600 12,900 16.20 12.20 8.20 7.00 1980 1730 1525 3.66 2.48 CX34−38B−6F
4 G60UHV−36B−090
Factory TXV
24,400 21,800 13,000 16.00 12.00 8.20 7.00 2015 1765 1560 3.62 2.44 CX34−38B−6F
4 G61MPV−36B−045
Factory TXV
24,400 21,800 13,000 16.20 12.00 8.20 7.00 2005 1755 1555 3.64 2.44 CX34−38A−6F
4 G60UHV−36A−070
Factory TXV
24,400 21,800 13,000 16.20 12.00 8.20 7.00 2005 1755 1555 3.64 2.44 CX34−38B−6F
4 G61MPV−36B−070
Factory TXV
24,400 21,800 13,000 16.20 12.00 8.20 7.00 2005 1755 1555 3.64 2.44 CX34−38B−6F
4 G71MPP−36B−070
Factory TXV
24,400 21,600 12,900 16.20 12.20 8.20 7.00 1980 1730 1525 3.66 2.48 CX34−38B−6F
4 G60UHV−36B−090
Factory TXV
24,400 21,800 13,000 16.20 12.00 8.20 7.00 2005 1755 1555 3.64 2.44 CX34−38A−6F
4 G60UHV−36A−070
Factory TXV
24,600 21,200 12,700 16.50 12.20 7.70 6.70 1980 1815 1590 3.42 2.34 CX34−31B−6F
4 G60UHV−36B−090
Factory TXV
Down−Flow Indoor Coils
Down−Flow Coils
23,200 22,200 13,400 14.00 10.85 7.70 6.70 2135 1925 1705 3.38 2.30 3 CR33−24A/B−F
2 49L24
23,600 22,400 13,500 14.20 11.00 7.70 6.70 2135 1885 1685 3.48 2.34 3 CR33−30/36A/B/C−F
2 49L24
NOTE − When used with gas furnaces, a dual−fuel control (i.e. FM21) or a control system with dual−fuel capabilities (i.e. Harmony III, LZP−2 or LZP−4) must be used (ordered extra).
1 Certified in accordance with USE certification program which is based on ARI Standard 210/240 with 25 ft. of connecting refrigerant lines;
Cooling Ratings − 95_F outdoor air temperature and 80_F db/67_F wb entering indoor coil air.
High Temperature Heating Ratings − 47_F db/43_F wb outdoor air temperature and 70_F db entering indoor coil air.
Low Temperature Heating Ratings − 17_F db/15_F wb outdoor air temperature and 70_F db entering indoor coil air.
2
Factory installed expansion valve or RFC on indoor unit MUST be replaced with valve specified (if equipped).
3
4
5
Blower must be capable of time−off blower delay. Indoor Blower Off Delay Relay (58M81) is recommend for field installation.
Blower control must be set for a time−off blower delay.
Most popular air handler combination.
XP16 − 2 to 5 Ton Heat Pump / Page 9
ARI RATINGS
1 ARI
Standard 210/240 Ratings
Capacity − Btuh
Efficiency
Total Watts
COP
High
Low
HSPF
High Low High Low
Temp Temp.
Temp
Cooling Temp.
Cool Heat Heat Heat Heat
Heating Heating SEER EER IV V
I d
Indoor
Unit
U it Model
M d l No.
N
XP16−024
Down−Flow Indoor Coils + Furnaces
Expansion
Device
2 TON
Down−Flow Coils + Furnaces
23,800 21,800 13,100 15.70 11.70 8.00 7.00 2015 1790 1580 3.56 2.42 CR33−24B−F
4 G61MPV−36B−070
2 49L24
23,800 21,800 13,100 15.70 11.70 8.00 7.00 2015 1790 1580 3.56 2.42 CR33−24B−F
4 G71MPP−36B−070
2 49L24
23,800 21,800 13,100 15.70 11.70 8.00 7.00 2025 1795 1585 3.56 2.42 CR33−24B−F
4 G61MPV−36B−045
2 49L24
24,000 21,800 13,100 15.70 11.70 8.20 7.00 2035 1780 1575 3.58 2.44 CR33−24A−F
4 G60DFV−36A−070
2 49L24
24,200 21,800 12,900 16.20 12.20 8.20 7.20 1970 1720 1520 3.72 2.48 CR33−30/36C−F 4 G61MPV−36C−090
2 49L24
24,200 21,800 12,900 16.20 12.20 8.20 7.20 1970 1720 1520 3.72 2.48 CR33−30/36C−F
4 G71MPP−36C−090
2 49L24
24,200 21,800 13,000 16.20 12.00 8.20 7.20 2005 1730 1535 3.70 2.48 CR33−30/36B−F
4 G61MPV−36B−070
2 49L24
24,200 21,800 13,000 16.20 12.00 8.20 7.20 2005 1730 1535 3.70 2.48 CR33−30/36B−F
4 G71MPP−36B−070
2 49L24
24,200 22,000 13,100 16.20 12.00 8.20 7.20 2015 1735 1545 3.72 2.48 CR33−30/36B−F
4 G61MPV−36B−045
2 49L24
24,400 22,000 13,100 16.50 12.00 8.20 7.20 2015 1720 1540 3.74 2.50 CR33−30/36A−F
4 G60DFV−36A−070
2 49L24
24,600 22,000 13,100 16.70 12.20 8.50 7.20 2005 1690 1515 3.82 2.54 CR33−30/36B−F
Horizontal Indoor Coils
Horizontal Coils
4 G60DFV−36B−090
2 49L24
23,800 22,400 13,500 14.00 10.95 7.70 6.70 2175 1925 1745 3.42 2.26 3 CH33−36C−2F
Horizontal Indoor Coils + Furnaces
Horizontal Coils + Furnaces
2 49L24
24,000 21,400 12,700 16.20 12.00 7.70 6.70 2000 1855 1620 3.38 2.30 CH33−36A−2F
4 G60UHV−36A−070
2 49L24
24,000 21,400 12,700 16.20 12.00 8.00 6.70 1975 1785 1575 3.52 2.36 CH33−36B−2F
4 G61MPV−36B−070
2 49L24
24,000 21,400 12,700 16.20 12.00 8.00 6.70 1975 1785 1575 3.52 2.36 CH33−36B−2F
4 G71MPP−36B−070
2 49L24
24,000 21,400 12,700 16.50 12.20 8.00 6.70 1955 1765 1550 3.56 2.40 CH33−36B−2F
4 G60UHV−36B−090
2 49L24
24,000 21,400 12,800 16.20 12.00 7.70 6.70 1990 1790 1580 3.50 2.38 CH33−36B−2F
4 G61MPV−36B−045
2 49L24
24,200 21,400 12,700 16.20 12.20 8.00 6.70 1955 1740 1550 3.60 2.40 CH33−36C−2F
4 G61MPV−36C−090
2 49L24
24,200 21,400 12,700 16.20 12.20 8.00 6.70 1955 1740 1550 3.60 2.40 CH33−36C−2F
4 G71MPP−36C−090
2 49L24
XP16−036
Air Handlers
3 TON
Air Handlers
34,600 33,000 20,000 14.70 11.20 8.00 6.70 3080 2980 2550 3.24 2.30 3 CBX32M−030 (Multi−Position)
Factory TXV
35,200 33,000 19,900 15.50 11.50 8.00 7.00 3055 2900 2495 3.34 2.34 4 CBX32MV−024/030 (Multi−Position)
Factory TXV
35,200 33,200 20,000 14.70 11.20 8.00 7.00 3105 2950 2550 3.30 2.30
3 CBX32M−036
35,600 33,200 19,900 16.00 11.70 8.20 7.00 3045 2865 2480 3.40 2.34
4,5 CBX32MV−036
35,600 33,000 19,700 15.70 11.70 8.20 7.00 3000 2835 2440 3.42 2.36
4 CBX27UH−036
(Multi−Position)
(Multi−Position)
(Up−Flow/Horizontal)
Factory TXV
Factory TXV
2 49L24
35,600 33,600 20,400 14.70 11.20 8.20 7.20 3110 2895 2470 3.40 2.42 CBX26UH−030 (Up−Flow / Horizontal)
Factory TXV
36,000 33,600 20,400 14.50 11.50 8.20 7.20 3110 2865 2455 3.44 2.44 CBX26UH−036 (Up−Flow / Horizontal)
2 49L24
36,800 32,800 19,700 16.20 12.20 8.20 7.20 2970 2805 2385 3.42 2.42 4 CBX27UH−042 (Up−Flow/Horizontal)
Up−Flow Indoor Coils
Up−Flow Coils
2 49L24
35,200 33,800 20,600 14.00 11.00 8.00 7.00 3190 2995 2565 3.30 2.36 3 CX34−38A/B−6F
Factory TXV
NOTE − When used with gas furnaces, a dual−fuel control (i.e. FM21) or a control system with dual−fuel capabilities (i.e. Harmony III, LZP−2 or LZP−4) must be used (ordered extra).
1 Certified in accordance with USE certification program which is based on ARI Standard 210/240 with 25 ft. of connecting refrigerant lines;
Cooling Ratings − 95_F outdoor air temperature and 80_F db/67_F wb entering indoor coil air.
High Temperature Heating Ratings − 47_F db/43_F wb outdoor air temperature and 70_F db entering indoor coil air.
Low Temperature Heating Ratings − 17_F db/15_F wb outdoor air temperature and 70_F db entering indoor coil air.
2
Factory installed expansion valve or RFC on indoor unit MUST be replaced with valve specified (if equipped).
3
4
5
Blower must be capable of time−off blower delay. Indoor Blower Off Delay Relay (58M81) is recommend for field installation.
Blower control must be set for a time−off blower delay.
Most popular air handler combination.
XP16 − 2 to 5 Ton Heat Pump / Page 10
ARI RATINGS
1 ARI
Standard 210/240 Ratings
Capacity − Btuh
Efficiency
Total Watts
COP
High
Low
HSPF
High Low High Low
Temp Temp.
Temp
Cooling Temp.
Cool Heat Heat Heat Heat
Heating Heating SEER EER IV V
I d
Indoor
Unit
U it Model
M d l No.
N
XP16−036
3 TON
Up−Flow Indoor Coils + Furnaces
35,600 33,600 20,400 15.20 11.20
35,600 33,600 20,400 15.20 11.20
35,600 33,400 20,200 15.20 11.50
35,600 33,400 20,200 15.20 11.50
35,800 33,200 20,000 15.70 11.70
36,200 32,200 19,500 16.00 11.70
36,200 32,200 19,500 16.00 11.70
36,400 32,000 19,400 16.00 12.00
36,400 32,000 19,400 16.00 12.00
36,400 32,200 19,500 16.00 11.70
Down−Flow Indoor Coils
34,800 33,400 20,400 13.70 10.90
35,800 34,000 20,600 14.20 11.20
Down−Flow Indoor Coils + Furnaces
35,200 33,200 20,200 15.20 11.20
35,200 33,200 20,200 15.20 11.20
35,200 33,400 20,200 15.20 11.20
35,400 32,800 19,800 15.70 11.70
35,400 32,800 19,800 15.70 11.70
35,400 32,800 19,900 15.50 11.50
36,400 33,200 20,000 16.00 12.00
36,400 33,200 20,000 16.00 12.00
Horizontal Indoor Coils
34,800 33,600 20,400 13.70 10.95
35,200 33,800 20,600 14.00 11.00
Horizontal Indoor Coils + Furnaces
35,800 32,200 19,500 15.70 11.70
36,200 32,000 19,400 16.00 12.00
36,200 32,000 19,400 16.00 12.00
36,200 32,200 19,500 16.00 11.70
8.20
8.20
8.20
8.20
8.20
7.70
7.70
7.70
7.70
7.70
7.00
7.00
7.00
7.00
7.20
6.70
6.70
6.70
6.70
6.70
3125
3145
3100
3100
3040
3035
3035
3000
3000
3040
2915
2930
2910
2910
2830
3075
3075
3080
3080
3095
2490
2505
2475
2475
2405
2580
2580
2560
2560
2585
3.38
3.36
3.36
3.36
3.44
3.06
3.06
3.04
3.04
3.04
2.20
2.22
2.22
2.20
Up−Flow Coils + Furnaces
4 G60UHV−36A−070
CX34−38A−6F
4 G61MPV−36B−045
CX34−38B−6F
4 G61MPV−36B−070
CX34−38B−6F
4 G71MPP−36B−070
CX34−38B−6F
4 G60UHV−36B−090
CX34−38B−6F
4 G61MPV−36C−090
C33−44C
4 G71MPP−36C−090
C33−44C
4 G61MPV−36C−090
CX34−43C−6F
4 G71MPP−36C−090
CX34−43C−6F
4 G60UHV−36B−090
CX34−43B−6F
Down−Flow Coils
3 CR33−48B/C−F
3 CR33−50/60C−F
Down−Flow Coils + Furnaces
4 G61MPV−36B−070
CR33−48B−F
4 G71MPP−36B−070
CR33−48B−F
4 G61MPV−36B−045
CR33−48B−F
4 G61MPV−36C−090
CR33−48C−F
4 G71MPP−36C−090
CR33−48C−F
4 G60DFV−36B−090
CR33−48B−F
CR33−50/60C−F 4 G61MPV−36C−090
CR33−50/60C−F 4 G71MPP−36C−090
Horizontal Coils
3 CH23−51
3 CH23−65
Horizontal Coils + Furnaces
4 G60UHV−36B−090
CH33−42B−2F
4 G61MPV−36C−090
CH33−48C−2F
4 G71MPP−36C−090
CH33−48C−2F
CH33−44/48B−2F 4 G60UHV−36B−090
2.34
2.32
2.30
2.38
2.22
2.32
2.26
Air Handlers
4 CBX32MV−048 (Multi−Position)
4 CBX27UH−060 (Up−Flow/Horizontal)
3 CBX32M−048 (Multi−Position)
4 CBX27UH−048 (Up−Flow/Horizontal)
4 CBX32MV−068 (Multi−Position)
4,5 CBX32MV−060 (Multi−Position)
3 CBX32M−060 (Multi−Position)
2.40
2.38
2.38
2.38
2.44
2.22
2.22
2.22
2.22
2.20
7.70 6.70 3190 3065 2610 3.20 2.28
8.20 7.00 3195 2950 2555 3.38 2.36
8.00
8.00
8.00
8.00
8.00
8.00
8.50
8.50
7.00
7.00
7.00
7.00
7.00
7.00
7.20
7.20
3100
3100
3140
3000
3000
3015
3005
3005
2980
2980
2995
2885
2885
2890
2765
2765
2520
2520
2550
2425
2425
2435
2370
2370
3.26
3.26
3.26
3.34
3.34
3.32
3.52
3.52
2.34
2.34
2.32
2.40
2.40
2.40
2.48
2.48
7.70 6.70 3185 3045 2595 3.24 2.30
8.00 7.00 3190 2980 2555 3.32 2.36
7.70
7.70
7.70
7.70
6.70
6.70
6.70
6.70
3035
3000
3000
3040
3105
3085
3085
3075
2590
2565
2565
2585
3.04
3.04
3.04
3.06
XP16−048
Air Handlers
47,000 44,500
47,000 45,000
47,000 44,500
47,500 45,000
47,500 43,000
47,500 44,000
47,500 45,000
Expansion
Device
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
2 49L24
4 TON
26,400
26,800
26,600
27,000
25,800
26,000
26,800
16.00
15.70
14.70
15.70
15.70
16.00
14.50
11.70
11.70
11.50
12.00
12.00
12.00
11.20
8.20
8.00
8.00
8.00
7.70
8.20
8.00
7.00
6.70
7.00
7.00
6.70
7.00
6.70
3995
3960
4055
3960
3945
3935
4240
3895
3990
3970
3910
4070
3865
4045
3315
3375
3380
3320
3400
3280
3480
3.34
3.30
3.28
3.38
3.10
3.34
3.26
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
NOTE − When used with gas furnaces, a dual−fuel control (i.e. FM21) or a control system with dual−fuel capabilities (i.e. Harmony III, LZP−2 or LZP−4) must be used (ordered extra).
1 Certified in accordance with USE certification program which is based on ARI Standard 210/240 with 25 ft. of connecting refrigerant lines;
Cooling Ratings − 95_F outdoor air temperature and 80_F db/67_F wb entering indoor coil air.
High Temperature Heating Ratings − 47_F db/43_F wb outdoor air temperature and 70_F db entering indoor coil air.
Low Temperature Heating Ratings − 17_F db/15_F wb outdoor air temperature and 70_F db entering indoor coil air.
2
Factory installed expansion valve or RFC on indoor unit MUST be replaced with valve specified (if equipped).
3
4
5
Blower must be capable of time−off blower delay. Indoor Blower Off Delay Relay (58M81) is recommend for field installation.
Blower control must be set for a time−off blower delay.
Most popular air handler combination.
XP16 − 2 to 5 Ton Heat Pump / Page 11
ARI RATINGS
1 ARI
Standard 210/240 Ratings
Efficiency
Total Watts
Capacity − Btuh
High
Low
Cooling Temp
Temp
Temp. Temp.
Heating Heating SEER EER
COP
I d
Indoor
Unit
U it Model
M d l No.
N
HSPF
IV
High Low High Low
Cool Heat Heat Heat Heat
V
XP16−048
Expansion
Device
4 TON
Up−Flow Indoor Coils
Up−Flow Coils
48,000 43,500 26,600 14.00 11.00 8.00 7.00 4365 3875 3450 3.30 2.26 CX34−62D−6F
Factory TXV
Up−Flow Indoor Coils + Furnaces
47,500 43,500 26,000 15.70 11.70
48,000 44,000 26,200 15.70 11.70
48,500 43,000 25,800 15.70 11.70
48,500 43,500 26,200 15.70 11.70
48,500 43,500 26,200 15.70 11.70
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
7.70
7.70
8.20
8.20
8.20
6.70
6.70
7.20
7.15
7.15
4010
4090
4145
4145
4145
4110
4150
3650
3730
3730
3450
3510
3225
3325
3325
3.10
3.10
3.46
3.42
3.42
2.20
2.18
2.34
2.30
2.30
Up−Flow Coils + Furnaces
4 G60UHV−60D−135
CX34−60D−6F
4 G61MPV−60D−135
CX34−60D−6F
4 G60UHV−60D−135
CX34−62D−6F
4 G61MPV−60D−135
CX34−62D−6F
4 G71MPP−60D−135
CX34−62D−6F
Horizontal Indoor Coils
Horizontal Coils
47,000 44,000 26,800 14.00 11.00 7.70 6.70 4225 4180 3550 3.08 2.22 3 CH33−62D−2F
47,000 46,000 27,600 14.20 11.20 8.20 7.00 4185 3845 3360 3.50 2.40 3 CH23−68
Horizontal Indoor Coils + Furnaces
47,500 43,500 26,000 15.70 11.70
47,500 43,500 26,000 15.70 11.70
47,500 44,000 26,400 15.50 11.50
47,500 44,000 26,400 15.50 11.50
7.70
7.70
7.70
7.70
6.70
6.70
6.70
6.70
4045
4005
4095
4095
4115
4080
4135
4135
3470
3425
3500
3500
3.10
3.12
3.12
3.12
2 91M02
2.20
2.22
2.20
2.20
Horizontal Coils + Furnaces
4 G60UHV−60D−135
CH33−60D−2F
4 G60UHV−60D−135
CH33−62D−2F
4 G61MPV−60D−135
CH33−62D−2F
4 G71MPP−60D−135
CH33−62D−2F
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
XP16−060
Air Handlers
57,000 51,500
57,000 52,500
57,500 53,000
58,000 52,000
56,500 52,500
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
5 TON
32,600
33,200
33,600
33,200
33,200
15.20
15.50
14.50
14.70
15.20
11.50
11.50
11.20
11.20
11.20
8.00
8.20
8.50
8.20
8.50
7.20
7.50
7.50
7.20
7.20
4935
4965
5090
5105
4985
4905
4680
4750
4935
4710
4225
4075
4170
4350
4115
3.08
3.28
3.28
3.08
3.26
2.26
2.38
2.36
2.24
2.36
Air Handlers
4 CBX32MV−068 (Multi−Position)
4,5 CBX32MV−060 (Multi−Position)
3 CBX32M−060 (Multi−Position)
CBX26UH−060 (Up−Flow / Horizontal)
4 CBX27UH−060 (Up−Flow/Horizontal)
Up−Flow Indoor Coils
56,500 52,000 33,200
57,000 52,000 33,200
57,000 52,000 33,400
58,000 52,000 33,200
14.00
14.00
14.00
14.20
11.00
11.00
11.00
11.20
7.70
7.70
7.70
7.70
7.00
7.00
7.00
7.00
5130
5140
5135
5150
5125
5160
5105
5080
4445
4460
4435
4440
2.98
2.96
2.98
3.00
2.18
2.18
2.20
2.18
Up−Flow Coils
3 CX34−60D−6F
3 CX34−49C−6F
3 CX34−62D−6F
3 CX34−62C−6F
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Up−Flow Indoor Coils + Furnaces
57,000 51,500 32,800 15.20 11.20
57,000 51,500 32,800 15.20 11.20
57,000 51,500 33,000 14.50 11.20
57,000 51,500 33,000 14.50 11.20
57,000 51,500 33,000 15.00 11.20
57,000 51,500 33,000 15.00 11.20
8.00
8.00
7.70
7.70
7.70
7.70
7.00
7.00
6.70
6.70
7.00
7.00
4990
4990
5095
5095
5040
5045
4995
4995
5120
5120
5065
5085
4310
4310
4420
4420
4365
4375
3.02
3.02
2.94
2.94
2.98
2.96
2.22
2.22
2.18
2.18
2.22
2.20
Up−Flow Coils + Furnaces
4 G61MPV−60D−135
CX34−60D−6F
4 G71MPP−60D−135
CX34−60D−6F
4 G61MPV−60C−110
CX34−49C−6F
4 G71MPP−60C−110
CX34−49C−6F
4 G60UHV−60C−090
CX34−49C−6F
4 G60UHV−60C−110
CX34−49C−6F
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Up−Flow Indoor Coils + Furnaces
Continued on Next Page
NOTE − When used with gas furnaces, a dual−fuel control (i.e. FM21) or a control system with dual−fuel capabilities (i.e. Harmony III, LZP−2 or LZP−4) must be used (ordered extra).
1 Certified in accordance with USE certification program which is based on ARI Standard 210/240 with 25 ft. of connecting refrigerant lines;
Cooling Ratings − 95_F outdoor air temperature and 80_F db/67_F wb entering indoor coil air.
High Temperature Heating Ratings − 47_F db/43_F wb outdoor air temperature and 70_F db entering indoor coil air.
Low Temperature Heating Ratings − 17_F db/15_F wb outdoor air temperature and 70_F db entering indoor coil air.
2
Factory installed expansion valve or RFC on indoor unit MUST be replaced with valve specified (if equipped).
3
4
5
Blower must be capable of time−off blower delay. Indoor Blower Off Delay Relay (58M81) is recommend for field installation.
Blower control must be set for a time−off blower delay.
Most popular air handler combination.
XP16 − 2 to 5 Ton Heat Pump / Page 12
ARI RATINGS
1 ARI
Standard 210/240 Ratings
Efficiency
Total Watts
Capacity − Btuh
High
Low
Cooling Temp
Temp
Temp. Temp.
Heating Heating SEER EER
COP
I d
Indoor
Unit
U it Model
M d l No.
N
HSPF
IV
High Low High Low
Cool Heat Heat Heat Heat
V
XP16−060
5 TON
Up−Flow Indoor Coils + Furnaces (Continued)
57,500 51,500 32,800 15.50 11.50 8.00 7.20 4995
57,500 51,500 32,800 15.20 11.50 8.00 7.00 5000
57,500 51,500 32,800 15.20 11.50 8.00 7.00 5000
57,500 52,500 33,800 14.70 10.95 7.70 7.00 5255
57,500 52,500 33,800 14.70 10.95 7.70 7.00 5255
58,000 51,500 33,000 15.20 11.20 8.00 7.00 5060
58,000 51,500 33,000 15.50 11.50 8.00 7.00 5050
58,000 52,000 33,200 15.00 11.20 7.70 7.00 5105
58,000 52,000 33,200 15.00 11.20 7.70 7.00 5105
58,500 52,000 32,800 15.50 11.70 8.00 7.20 5005
58,500 52,500 33,800 15.20 11.00 8.00 7.00 5270
58,500 52,500 33,800 15.20 11.00 8.00 7.00 5270
4915
4980
4980
5185
5185
5005
4985
5040
5040
4895
5105
5105
4265
4300
4300
4525
4525
4355
4345
4400
4400
4255
4510
4510
3.08
3.04
3.04
2.96
2.96
3.02
3.02
3.02
3.02
3.12
3.02
3.02
2.26
2.24
2.24
2.18
2.18
2.22
2.22
2.20
2.20
2.26
2.20
2.20
Up−Flow Coils + Furnaces
4 G60UHV−60D−135
CX34−60D−6F
4 G61MPV−60D−135
CX34−62D−6F
4 G71MPP−60D−135
CX34−62D−6F
4 G61MPV−60C−090
CX34−49C−6F
4 G71MPP−60C−090
CX34−49C−6F
4 G60UHV−60C−110
CX34−62C−6F
4 G60UHV−60C−090
CX34−62C−6F
4 G61MPV−60C−110
CX34−62C−6F
4 G71MPP−60C−110
CX34−62C−6F
4 G60UHV−60D−135
CX34−62D−6F
4 G61MPV−60C−090
CX34−62C−6F
4 G71MPP−60C−090
CX34−62C−6F
Down−Flow Indoor Coils
Down−Flow Coils
55,500 53,000 33,800 13.70 10.85 8.20 7.20 5120 4820 4200 3.22 2.36 CR33−50/60C−F
55,500 53,000 33,800 13.70 10.85 8.20 7.20 5120 4820 4200 3.22 2.36 CR33−60D−F
Down−Flow Indoor Coils + Furnaces
55,500 52,500 33,400 14.70 11.00
55,500 52,500 33,400 14.70 11.00
55,500 53,000 33,600 14.50 10.95
55,500 53,000 33,600 14.50 10.95
55,500 53,500 34,200 14.50 10.60
55,500 53,500 34,200 14.50 10.60
56,000 52,500 33,400 15.00 11.20
56,000 52,500 33,400 15.00 11.20
56,000 53,000 33,600 15.00 11.00
Expansion
Device
8.50
8.50
8.20
8.20
8.50
8.50
8.50
8.50
8.50
7.50
7.50
7.20
7.20
7.50
7.50
7.50
7.50
7.50
5015
5015
5075
5075
5235
5235
4990
5000
5035
4730
4730
4780
4780
4855
4855
4685
4700
4700
4100
4100
4155
4155
4270
4270
4065
4080
4090
3.26
3.26
3.24
3.24
3.22
3.22
3.28
3.28
3.30
2.38
2.38
2.36
2.36
2.34
2.34
2.40
2.40
2.40
Down−Flow Coils + Furnaces
4 G61MPV−60D−135
CR33−60D−F
4 G71MPP−60D−135
CR33−60D−F
CR33−50/60C−F 4 G61MPV−60C−110
CR33−50/60C−F 4 G71MPP−60C−110
CR33−50/60C−F 4 G61MPV−60C−090
CR33−50/60C−F 4 G71MPP−60C−090
4 G60DFV−60D−135
CR33−60D−F
CR33−50/60C−F 4 G60DFV−60C−110
CR33−50/60C−F 4 G60DFV−60C−090
Horizontal Indoor Coils
56,500 52,000 33,400 14.00 10.95 7.70 7.00 5170 5135 4460 2.96 2.20
56,500 52,000 33,400 14.00 11.00 7.70 7.00 5130 5110 4420 2.98 2.22
57,500 54,000 34,000 14.20 11.20 8.70 7.70 5145 4635 4090 3.42 2.44
Horizontal Coils
3 CH33−60D−2F
3 CH33−62D−2F
3 CH23−68
Horizontal Indoor Coils + Furnaces
56,500 51,500 32,800 15.20 11.20
56,500 51,500 32,800 15.20 11.20
57,000 51,500 32,800 15.20 11.20
57,000 51,500 32,800 15.20 11.20
57,000 51,500 32,800 15.20 11.20
57,500 52,000 33,000 15.20 11.50
Horizontal Coils + Furnaces
4 G61MPV−60D−135
CH33−60D−2F
4 G71MPP−60D−135
CH33−60D−2F
4 G61MPV−60D−135
CH33−62D−2F
4 G71MPP−60D−135
CH33−62D−2F
4 G60UHV−60D−135
CH33−60D−2F
4 G60UHV−60D−135
CH33−62D−2F
7.70
7.70
8.00
8.00
8.00
8.00
7.00
7.00
7.00
7.00
7.00
7.20
4985
4985
4985
4985
4990
4995
5040
5040
4985
4985
4955
4900
4325
4325
4285
4285
4280
4240
3.00
3.00
3.02
3.02
3.04
3.12
2.22
2.22
2.24
2.24
2.24
2.28
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
Factory TXV
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
2 91M02
NOTE − When used with gas furnaces, a dual−fuel control (i.e. FM21) or a control system with dual−fuel capabilities (i.e. Harmony III, LZP−2 or LZP−4) must be used (ordered extra).
1 Certified in accordance with USE certification program which is based on ARI Standard 210/240 with 25 ft. of connecting refrigerant lines;
Cooling Ratings − 95_F outdoor air temperature and 80_F db/67_F wb entering indoor coil air.
High Temperature Heating Ratings − 47_F db/43_F wb outdoor air temperature and 70_F db entering indoor coil air.
Low Temperature Heating Ratings − 17_F db/15_F wb outdoor air temperature and 70_F db entering indoor coil air.
2
Factory installed expansion valve or RFC on indoor unit MUST be replaced with valve specified (if equipped).
3
4
5
Blower must be capable of time−off blower delay. Indoor Blower Off Delay Relay (58M81) is recommend for field installation.
Blower control must be set for a time−off blower delay.
Most popular air handler combination.
XP16 − 2 to 5 Ton Heat Pump / Page 13
REVISIONS
Sections
Description of Change
ARI Ratings
New rating for XP16−048 with CX34−62D coil and CX34−62D coils with furnaces.
ARI Ratings
Removed CB30U ratings
ARI Ratings
Add ratings with G71MPP furnaces.
Visit us at www.lennox.com
For the latest technical information, www.lennoxdavenet.com
Contact us at 1−800−4−LENNOX
NOTE − Due to Lennox’ ongoing committment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability.
Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury.
©2008 Lennox Industries Inc.
Installation and service must be performed by a qualified installer and servicing agency.
Download PDF