Linear Pro Headphone Amplifier Excellence in the studio and on stage The Linear Pro belongs to the league of first-class headphone amplifiers designed for professional studio applications. Based upon our best-selling Linear model, this device manufactured in small numbers is tailored to the needs of recording and mastering studios, convincing not only in numerous broadcasting companies and recording studios by its performance and reliability. Highlights Features reference class headphone amplifier for all dynamic headphones class A solid-state output stage maximum gain adjustable up to +20 dB Alps volume control two headphone connections with goldplated Neutrik headphone sockets oversized internal power supply original Neutrik XLR Combo receptables for professional users ≠ ≠ ≠ ≠ If you often do recordings under difficult spatial conditions and need a reliable tool for an untiringly precise headphone work, the Linear Pro will perform at its best. It lets you judge your recordings in a precise and dependable manner – irrespective of loudspeakers, room acoustics and ambience noises. ≠ ≠ ≠ ≠ Options aluminium face plate available in silver or black ≠ Accessories (optional) mounting kit for vertical or horizontal fixation Top-notch quality for your studio work Due to its superb circuit design and selected components, the Linear Pro meets all requirements of professional users who are convinced by its lowartefact linear reproduction, its downright realistic spatial imaging and high transient accuracy. Furthermore even headphones with a critical impedance are easily spurred on to their absolute top performance. The Linear Pro’s balanced high headroom stereo input is equipped with Neutrik combo sockets which allow to connect both balanced and unbalanced signal sources. Lehmannaudio Vertriebs GmbH Richard-Zanders-Straße 54 51469 Bergisch Gladbach Germany firstname.lastname@example.org www.lehmannaudio.com www.facebook.com/lehmannaudio Made in Germany Tech Info Input impedance 18 kohms, balanced Gain settings 0 dB/10 dB/18 dB/20 dB Frequency response 10 Hz (-0.3 dB) to 35 kHz (-1 dB) Signal to noise ratio (RMS unweighted) > 90 dB at gain 0 dB THD > 0.003 % at 13 mW/300 ohms Channel separation > 70 dB at 10 kHz Channel mismatch < 0.3 dB at maximum volume Output power ≠ ≠ Connectors audio ≠ ≠ In: Neutrik XLR combo jacks with gold plated contacts Out: Neutrik 6.35 jacks with gold plated contacts Power consumption app. 10 W Outer dimensions WxDxH 110 mm x 280 mm x 50 mm Weight 1.5 kg netto 200 mW/300 ohms 400 mW/60 ohms Output impedance 5 ohms Maximum output level +20 dBu Press Commentaries Version: July 2014. Subject to change without prior notice. Accessories (optional) ‘(…) belongs to the reference class of its kind. It creates a relaxed, open, neutral and detailed acoustic image which will hardly allow any fatigue effects to sneak in, with a far superior reproduction of spatiality, low frequencies and transients than what my reference candidates could have delivered.’ Studiomagazin/10 2008 ‘When I found Lehmann Audio on the internet, my decision was rapidly made, and the (…) Linear sounds great.’ www.prosoundnewseurope.com/02 2008 With our mounting kit your Linear Pro mounts quite easily and inconspicuously under a table/mixing desk. A mounting template is included.