elmeg D151R / eng / elmeg D151R_V1 / Cover_front.fm / 8/11/16
bintec elmeg
User Guide
INT 1
Template bintec-elmeg, Version 1, 01.07.2014
Calls
Calendar
User Guide
elmeg D151R
Copyright© Version 1.0, 2016 bintec elmeg GmbH
elmeg D151R
1
elmeg D151R / eng / elmeg D151R_V1 / Cover_front.fm / 8/11/16
bintec elmeg
Legal Notice
Aim and purpose
This document is part of the user manual for the installation and configuration of bintec elgmeg
devices. For the latest information and notes on the current software release, please also read
our release notes, particularly if you are updating your software to a higher release version. You
will find the latest release notes under www.bintec-elmeg.com.
Liability
This manual has been put together with the greatest possible care. However, the information
contained in this manual is not a guarantee of the properties of your product. bintec elmeg
GmbH is only liable within the terms of its conditions of sale and supply and accepts no liability
for technical inaccuracies and/or omissions.
The information in this manual can be changed without notice. You will find additional information and also release notes for bintec elmeg devices under www.bintec-elmeg.com.
bintec elmeg devices make WAN connections as a possible function of the system configuration. You must monitor the product in order to avoid unwanted charges. bintec elmeg GmbH
accepts no responsibility for data loss, unwanted connection costs and damage caused by unintended operation of the product.
Trademarks
bintec trademarks and the bintec logo, artem trademarks and the artem logo, elmeg trademarks and the elmeg logo are registered trademarks of bintec elmeg GmbH.
Company and product names mentioned are usually trademarks of the companies or manufacturers concerned.
Copyright
All rights reserved. No part of this manual may be reproduced or further processed in any way
without the written consent of bintec elmeg GmbH. The documentation may not be processed
and, in particular, translated without the consent of bintec elmeg GmbH.
You will find information on guidelines and standards in the declarations of conformity under
www.bintec-elmeg.com/confomity.
Template bintec-elmeg, Version 1, 01.07.2014
How to reach bintec elmeg GmbH
bintec elmeg GmbH
Südwestpark 94, D-90449 Nürnberg, Deutschland,
Telefon: +4991196730, Fax: +499116880725
Internet: www.bintec-elmeg.com
© bintec elmeg GmbH 2016, All rights reserved. Rights of modification reserved.
2
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / intro_CAT-iq.fm / 8/11/16
bintec elmeg
elmeg D151R: The robust professional DECT handset for tough everyday
conditions
bintec elmeg handsets are epitomised for use in commercial environments and form part of the
professional bintec elmeg be.IP series, the Digitalisation box Premium, and the Digitalisation
box Smart.
This manual contains a description of all the functions your handset offers.
Please consult the relevant manual to discover the full functionality of a be.IP or a Digitalisation
box Premium/Digitalisation box Smart.
You can also use your handset with the DECT GAP bases from other manufacturers:
On a DECT telephone/router/multicell system from other manufacturers with
GAP compatibility
Basic telephony functions are available in GAP mode.
For your further convenience, your elmeg D151R offers a locally managed list of missed calls.
On DECT routers with CAT-iq 2.0
Template bintec-elmeg, Version 1, 01.07.2014
Your bintec elmeg CAT-iq handset is certified in accordance with the DECT/CAT-iq 2.0 standard.
Handset functions on a CAT-iq router (amongst others):
• Convenient call-making and call lists,
• Wideband calls in HD Voice™ quality,
• Full access to the central directory in the router,
• Use of multiple lines and call numbers *).
Details can be found in the user guide for your router.
*) The relevant scope of the function is dependent on the country, network and router
elmeg D151R
3
elmeg D151R / eng / elmeg D151R_V1 / overview.fm / 8/11/16
Overview of handset
bintec elmeg
Overview of handset
1
1
2
3
2
3
4
5
6
07:1
INT 1
14 Oct
7
4
Calls
Spot LED
8
9
5
16
15
14
13
6
10
11
12
7
8
13
14
12
Template bintec-elmeg, Version 1, 01.07.2014
11
9
15
10
16
LED light / Visual call signal
( page 33, page 33)
Display in idle status
Status bar ( page 39)
Icons display current settings and operating
status of the phone
Volume keys ( page 14)
Display keys ( page 14)
End call key, on/off key
End call, cancel function, go back one menu
level (press briefly), back to idle status (press
and hold), switch handset on/off (press and
hold in idle status)
Message key ( page 15)
Access to the calls and message lists;
Flashing: new message or new call
Profile key ( page 33)
Hash key
Keypad lock on/off (press and hold in idle status);
Toggles between upper/lower case and digits
Connection socket for headset ( page 10)
Microphone
Star key
With an open connection: switch from pulse
dialling to tone dialling (press briefly);
When inputting text: Open special characters
table
Key 1
Select network mailbox (press and hold)
Recall key
- Consultation call (flash)
- Insert a dialling pause (press and hold)
Answer call key / Handsfree key
Dial number displayed;
Accept call; switch from earpiece to handsfree
mode;
Open the redial list (press briefly);
start dialling (press and hold);
Control key / Menu key ( page 13)
The product images are depicted schematically and may differ from the actual
appearance of the product.
4
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / HSGIVZ.fm / 8/11/16
bintec elmeg
Contents
Contents
Overview of handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Illustration in the user guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Getting to know your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the telephone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Restoring phone to default setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Multiple handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Phonebook (Address book) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Call list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Sound profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Spot LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Room monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Menu tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Template bintec-elmeg, Version 1, 01.07.2014
Not all functions described in the user guide are available in all countries or from all
network providers.
elmeg D151R
5
elmeg D151R / eng / elmeg D151R_V1 / security.fm / 8/11/16
Safety precautions
bintec elmeg
Safety precautions
Read the safety precautions and the user guide before use.
Comprehensive user guides for all telephones and telephone systems as well as for
accessories can be found online at bintec-elmeg.com in the Support category. We
thereby help to save paper while providing fast access to the complete up-to-date
documentation at any time.
Use only the power adapter indicated on the device.
Use only rechargeable batteries that correspond to the specification (see "Specifications"). Never use a conventional (non-rechargeable) battery or other battery types as
this could result in significant health risks and personal injury. Rechargeable batteries,
which are noticeably damaged, must be replaced.
Using your telephone may affect nearby medical equipment. Be aware of the technical
conditions in your particular environment, e.g. doctor's surgery.
If you use a medical device (e.g. a pacemaker), please contact the device manufacturer.
They will be able to advise you regarding the susceptibility of the device to external
sources of high frequency energy (for the specifications of your bintec elmeg product see
"Specifications").
Do not hold the rear of the handset to your ear when it is ringing or when speaker mode
is activated. Otherwise you risk serious and permanent damage to your hearing.
The phone may cause interference in analogue hearing aids (humming or whistling) or
cause them to overload. If you require assistance, please contact the hearing aid supplier.
The base and charger are not splashproof. For this reason do not install them in a damp
environment such as bathrooms or shower rooms.
Do not use the devices in environments with a potential explosion hazard
(e.g. paint shops).
Remove faulty devices from use or have them repaired by our Service team, as these
could interfere with other wireless services.
Template bintec-elmeg, Version 1, 01.07.2014
Do not use the device if the display is cracked or broken. Broken glass or plastic can cause
injury to hands and face. Send the device to our Service department to be repaired.
Emergency numbers cannot be dialled if the keypad/display lock is activated!
6
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / starting.fm / 8/11/16
bintec elmeg
Illustration in the user guide
Illustration in the user guide
Warnings, which, if not heeded, can result in injury to persons or damage to devices.
Important information regarding function and appropriate handling or functions that
could generate costs.
Prerequisite for being able to carry out the following action.
Additional helpful information.
Keys
Talk key
Handsfree key
End call key
/
to
Number / letter keys
Control key rim / centre
Message key
Recall key
Star key
Hash key
Profile key
OK, Back, Select, Change, Save, . . .
Display keys
Procedures
Example: Switching Auto answer on/off
¤
. . . use
to select
Settings
Change ( = on)
Step
Template bintec-elmeg, Version 1, 01.07.2014
¤
¤
¤
¤
¤
¤
¤
OK
Telephony
OK
Auto Answer
Follow this procedure
When in idle status press the centre of the control key.
The main menu opens.
OK
Navigate to the
icon using the control key
.
Select OK to confirm. The submenu Settings opens.
Telephony Select the Telephony entry using the control key
.
OK
Select OK to confirm. The submenu Telephony opens.
Auto Answer
The function to switch Auto answer on/off appears as the first menu item.
Change
Select Change to activate or deactivate. Function is activated
vated .
elmeg D151R
/deacti-
7
elmeg D151R / eng / elmeg D151R_V1 / starting.fm / 8/11/16
Getting started
bintec elmeg
Getting started
Checking the contents of the package
•
•
•
•
•
•
•
•
One handset,
One charging cradle incl. power adapter,
One battery cover (rear cover for the handset),
One locking disc for the battery cover,
Two batteries,
One belt clip,
One rubber cover for the headset socket,
Safety precautions.
Installing the charging cradle
The charging cradle is designed for use in closed, dry rooms in a temperature range of
+5°C to +45°C.
¤ Set up the charging cradle on a flat, non-slip surface.
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of
different varnishes and polishes used on today's furnishings, marks on the surfaces cannot be
completely ruled out.
• Never expose the telephone to the effects of heat sources, direct sunlight or other
electrical devices.
• Protect your handset from moisture, dust, corrosive liquids and fumes.
Connecting the charging cradle
4
Template bintec-elmeg, Version 1, 01.07.2014
2
1
3
8
¤
¤
Connect the flat plug to the charging cradle 1 .
Plug the power adapter into the power socket 2 .
If you have to remove the plug from the charging cradle
again:
¤ Disconnect the power adapter from the mains power
supply.
¤ Press the release button 3 and disconnect the plug
4 .
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / starting.fm / 8/11/16
bintec elmeg
Getting started
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover
Use only rechargeable batteries recommended by bintec elmeg GmbH ( page 45),
as this could otherwise result in significant health risks and personal injury. For example, the outer casing of the batteries could be destroyed or the batteries could
explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.
¤
Insert the batteries with the polarity in the right
direction (for correct +/- direction, see diagram).
2
¤
¤
¤
¤
Hold the battery cover at a slight angle and insert
the bottom into the casing first 1 .
Then press the cover 2 until it clicks into place.
Insert the locking disc as shown (at an angle of
approx. 20°) 3 . Pay attention to the arrow
markings.
3
1
4
Turn locking disc clockwise to the end stop 4 . The
locking disc is closed once the markings on the disc
are aligned with those on the cover 5 .
5
Template bintec-elmeg, Version 1, 01.07.2014
7
To open the battery cover, for example to change the
batteries:
¤ Turn the locking disc anti-clockwise to the end stop
6 (approx. 20°) and remove 7 .
¤ Place your fingernail in the notch on the side
between the cover and the casing 8 and remove
the cover 9 .
elmeg D151R
6
9
8
9
elmeg D151R / eng / elmeg D151R_V1 / starting.fm / 8/11/16
Getting started
bintec elmeg
Charging the batteries
The batteries are supplied partially charged. Please charge completely before use. (The batteries are fully charged when the power icon disappears from the display.)
¤ Charge the handset in the charging cradle for 7.5 hours.
7,5 h
• The handset may only be placed in the designated base/charging cradle.
• The battery may heat up during charging. This is not dangerous.
• After a time, the charge capacity of the battery will decrease for technical reasons.
Belt clip
The handset has notches on each side to attach the belt clip.
• To attach — press the belt clip onto the back of the handset so that
the tabs on the belt clip click into place in the notches.
• To remove — press the centre of the belt clip firmly with your right
thumb, push the fingernail of your left thumb up between the clip
and the casing and pull the clip in an upward direction.
Template bintec-elmeg, Version 1, 01.07.2014
Connecting the headset
1
2
You can connect a headset to the underside
of your telephone with the 2.5 mm jack connector 1 .
10
If you do not wish to connect a headset,
please insert the rubber cover supplied
2 to guarantee the unit is still splash
proof.
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / starting.fm / 8/11/16
bintec elmeg
Getting started
Changing the display language
Change the display language if you do not understand the language currently set.
¤
Select language Select ( = selected)
Registering the handset
The registration process depends on the base. You must initiate
Registration
registration on the handset and on the base. Both must be carried
out within 60 secs.
¤ On the base: Press and hold (min. 3 secs) the Registration/paging key.
Please register
¤ On the handset, press the display key Register.
handset
Or:
OK
Registration OK Register Handset
OK
Register
Display shows: Searching for a base in registration mode. The
connection to the base will be established; this may take some
time.
¤ Enter the system PIN if required (factory setting: 0000). OK
When registering, the display screen shows: Handset is registering
After registering successfully, the display screen shows: Handset registered
Your handset can be registered on up to four bases. To see how to use your handset with
multiple bases and de-register a handset, refer to the user guide for the base.
For information on registering to a DECT IP multicell system, consult the relevant user
guide at
bintec-elmeg.com
Template bintec-elmeg, Version 1, 01.07.2014
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and so
that you can use the alarm.
¤ Press the display key Time.
Or:
OK Date/Time OK
¤ Setting the date and time:
¤ Save
Your phone is now ready for use.
elmeg D151R
11
elmeg D151R / eng / elmeg D151R_V1 / starting.fm / 8/11/16
Getting started
bintec elmeg
What would you like to do next?
After successfully setting up the phone, you can make calls straight away, customise your handset according to your requirements or firstly familiarise yourself with the operation.
Setting ringtones
Assign specific tunes to internal and external calls, reminders ( page 23), wake-up calls (
page 36) and to certain callers ( page 30).
Protecting yourself against unwanted calls
Set your phone up so that it doesn't ring if there is an anonymous call or use the time control (
page 25).
Adjusting your phone to your surroundings
Use 3 sound profiles to adjust your phone to a quiet or loud background ( page 33).
Register an existing bintec elmeg handset and add it to the phonebook
Use available handsets to continue calling from your new base. Transfer directory entries from
these handsets to your new handset ( page 31).
Template bintec-elmeg, Version 1, 01.07.2014
If you have any questions about using your phone, please read the tips on troubleshooting
( page 43) or contact our Customer Service team ( page 43).
12
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / operating.fm / 8/11/16
bintec elmeg
Getting to know your phone
Getting to know your phone
Switching the handset on/off
¤
Press and hold the End call key
in idle status to switch the handset on or off.
Locking/unlocking the keypad
The keypad lock prevents any accidental use of the phone. If you press a key when the keypad
is locked, a message is displayed.
¤ Press and hold the
key to lock or unlock the keypad.
If a call is signalled on the handset, the keypad automatically unlocks. and you can accept the
call. It then locks again when the call is finished.
Control key
In the description below, the side of the control key (up, down, right, left,
middle) that you have to press in the different operating situations is marked
in black, e.g.
for "press right on the control key".
The control key allows you to navigate within menus and entry fields. In idle
status or during an external call, it has the following functions:
When the handset is in idle status
Open the phonebook.
or
Open the main menu.
Open list of handsets.
During an external call
Open the phonebook.
Initiate an internal consultation call.
Adjust the loudspeaker volume for earpiece and handsfree mode.
Template bintec-elmeg, Version 1, 01.07.2014
Functions when pressing the centre of the control key
The key has different functions, depending on the operating situation.
• In idle status, it opens the main menu.
• In submenus, selection and entry fields, the key takes on the function of the display keys
OK, Yes, Save, Select or Change.
These instructions demonstrate opening the main menu by pressing the right of the
control key and confirming the functions by pressing the appropriate display key.
However, if you prefer, you can also press the middle of the control key.
elmeg D151R
13
elmeg D151R / eng / elmeg D151R_V1 / operating.fm / 8/11/16
Getting to know your phone
bintec elmeg
Volume keys
/
Press these keys on the right-hand side of the handset to set the volume for the
earpiece, ringtone, handsfree mode, alarm clock, appointments and the
headset depending on the situation.
Display keys
The display keys have a function preset by default in idle status, but the keys can be re-assigned
( page 26).
The functions of the display keys change depending on the operating situation.
Example
Back
Save
Current display key functions
Display keys
Some of the important display keys are:
Options
Open a menu for further functions.
OK
Confirm selection.
Back
Skip back one menu level or cancel operation.
Save
Save entry.
Overview of icons on the display keys
page 39.
Menu guidance
The functions of your telephone are displayed on a menu that consists of several levels. Menu
overview page 41.
Main menu (first menu level)
Template bintec-elmeg, Version 1, 01.07.2014
¤
When the handset is in idle status, press right on the control key
The main menu functions are shown in the display as icons. The
icon for the selected function is highlighted and the name of the
associated function appears in the display header.
Accessing a function, i.e. opening the corresponding submenu
(next menu level):
¤ Use the control key to navigate to the required function and
press the display key OK.
Returning to idle status: Briefly press the display key Back or End
call key
.
to open the main menu.
Example
Settings
Back
14
OK
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / operating.fm / 8/11/16
bintec elmeg
Getting to know your phone
Submenus
The functions in the submenus are displayed as lists.
To access a function:
¤ Scroll to the function using the control key and press OK.
Returning to the previous menu level: Briefly press the display key
Back or End call key
.
Example
Settings
Date/Time
Audio Settings
Display
Language
Registration
‚
Back
OK
Returning to idle status
From any menu:
¤ Press and hold the End call key .
Or:
¤ If you do not press a key, the display automatically returns to idle status after 2 minutes.
Message lists
Template bintec-elmeg, Version 1, 01.07.2014
Any messages you receive are saved in the message lists.
Example
An advisory tone sounds as soon as a new entry appears on a list.
The Message key also flashes. Icons for message types and the number of new messages are shown on the idle display.
New messages available:
INT 1
•
On the answer machine (depending on the base)/network
mailbox
•
In the missed calls list
•
In the missed alarms list
02
10
07:15
14 Oct
08
Open the message list by pressing the Message key
. You can
Calls
Spot LED
access the following message lists:
• Answer Mach.: Answer machine list (depending on the base)
• Mailbox: Network mailbox (if your network provider supports this function and the number
of the network mailbox has been stored.)
• Missed Calls: Missed call list (see "Call list" page 32)
• Missed Alarms: Missed appointments list
The icon for the network mailbox is always displayed, provided the number is stored in the
telephone. The other lists are only displayed if they contain messages.
Opening the list:
Select required list. OK
Exception: If you select the network mailbox, the number of the network mailbox will be
selected. Lists are not opened on the display.
elmeg D151R
15
elmeg D151R / eng / elmeg D151R_V1 / operating.fm / 8/11/16
Getting to know your phone
bintec elmeg
Entering numbers and text
If several number and/or text fields are displayed (e.g.
First Name and Surname in a phonebook entry), the field is automatically activated. The following fields must be activated by navigating with the control key
. A field is activated when a cursor
is blinking inside it.
New Entry
First Name:
I
Surname:
Phone (Home):
Abc
‚
Save
Correcting incorrect entries
• Deleting characters before the cursor: press the display key
briefly.
• Deleting words before the cursor: press and hold the display key
.
Entering text
• Letters/Characters: Multiple letters and characters are assigned to each key between
•
•
•
Template bintec-elmeg, Version 1, 01.07.2014
•
16
and
. The characters are shown according to the key in a selection line at the bottom left
of the display. The selected character is highlighted. Briefly press the key several times in
succession to select the required letter/character.
Placing the cursor: Letters/characters are inserted at the cursor position. You can insert the
cursor by pressing the control key
, or
in fields with multiple characters.
Typing lower case, upper case and numbers: Press the hash key
to switch between
lower case, upper case or numbers for the following letters.
When editing a phonebook entry, the first letter and each letter following a space is
automatically in upper case.
Special characters: Press the star key
to open the special characters table. Navigate to
the character desired using the star key and press the display key Insert to select it.
Special letters: Umlauts or other marked/diacritic characters can be selected by pressing the
corresponding letter several times. See the character table page 46.
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / telefony.fm / 8/11/16
bintec elmeg
Making calls
Making calls
Making an external call
¤
Enter number, briefly press the Answer call key
.
Or:
¤
Press and hold the Answer call key
, enter number.
You can cancel the dialling process with the End call key
.
Dialling with the redial list
The redial list contains the 20 numbers last dialled with the handset. You can manage this
similarly to your phone's message lists ( page 15).
¤ Press the Answer call key
briefly to open the redial list.
¤
Select entry. Press the Answer call key
. The number is dialled.
When a name and corresponding phone number are displayed: Press the display key View.
Managing entries in the redial list:
¤
Open redial list.
Select entry. Options
You can select the following functions:
• Copy to Directory OK
Copy an entry to the phonebook ( page 30).
• Display number OK
Copy a number into the display and edit it or add to it, then select with
entry in the phonebook with
.
• Delete entry OK
Delete the selected entry.
• Delete all OK
Delete all entries.
or save as a new
Dialling from the call list
Template bintec-elmeg, Version 1, 01.07.2014
¤
OK
Select list.
The number is dialled.
OK
Select entry.
• You can also bring up the call list using the display key
Calls, but you must assign a display key accordingly
( page 26).
• You can also open the list Missed calls using the Message key
.
Example
All calls
James Foster
Today, 18:30
01712233445566
11/06/2016, 18:30
0168123477945
10/06/2016, 17:13
View
elmeg D151R
Options
17
elmeg D151R / eng / elmeg D151R_V1 / telefony.fm / 8/11/16
Making calls
bintec elmeg
Dialling with the phonebook
¤
Select entry.
If multiple numbers are entered: Select the number with
key
or OK. The number is dialled.
and press the Answer call
One touch call
You can set up your phone so that you can dial a specific number when you press any key on
the keyboard. This allows children, who are unable to enter a number, to call a certain number,
for example.
¤
OK
One Touch Call OK
Activation:
On / Off
Call to Enter or change the number that you wish to dial.
Save
The activated One Touch Call appears on the idle display. The saved number is dialled by pressing any key. Press the End call key
to cancel dialling.
Ending one touch call mode:
Press the display key OFF. Press and hold the
key.
Or:
Press and hold the
key.
Accepting a call
You have the following options:
¤ Press
.
¤ If Auto Answer is switched on ( page 22), remove the handset from the charging cradle.
Activate/deactivate Simple Auto Answer
In addition to using the Answer call key
,
and
.
, you can also answer a call using the keys
...
¤
OK
Telephony OK
Easy Acceptance Change ( = activated)
Please note: Changes are only saved permanently in Profile Personal ( page 33).
Template bintec-elmeg, Version 1, 01.07.2014
Handsfree mode
If you are going to let someone listen in, you should tell the other party that this is happening.
¤ Press .
Placing the handset in the charging cradle during a call:
¤ Press and hold
for a further 2 seconds while placing the handset in the charging cradle.
18
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / telefony.fm / 8/11/16
bintec elmeg
Making calls
Adjusting the loudspeaker volume
• Accessing the settings via the menu:
¤
OK
Audio Settings OK Handset Volume OK
Volume can be set at 5 levels for the earpiece and headset.
Set the volume at 5 levels.
Earpiece:
Speaker:
Save
• Accessing the settings during a call for the mode currently in use (handsfree, earpiece, headset):
Press side keys / ( page 4) or control key
.
The setting is saved automatically after 2 seconds or press the display key Save. The screen
reverts back to its previous display.
Changes are only saved permanently in Profile Personal ( page 33).
Switching the microphone on/off (muting)
If you turn the microphone off during a call, your caller can no longer hear you.
¤ Press to switch the microphone on/off.
Setting the microphone sensitivity
During a call: There are four settings for the microphone sensitivity. With these settings you get
better acoustics in noisy or echoing environments.
¤ Press and hold the
key . . . set the microphone sensitivity with
Save . . . the
change is immediately effective and also applies to subsequent calls
Template bintec-elmeg, Version 1, 01.07.2014
If you do not save the setting, it only applies for the current call.
elmeg D151R
19
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
Adjusting the telephone settings
bintec elmeg
Adjusting the telephone settings
The handset and base station are preconfigured, but you can change the settings to suit your
individual requirements.
The settings can be changed via the menu Settings whilst on a call or in idle status.
Date and time
To ensure you have the correct time for incoming calls and to use the alarm clock and calendar,
for example, the date and time must be set.
If the date and time have not yet been set on the handset, the display key Time appears.
¤ Press the display key Time
or
¤
. . . use
to select
Settings OK
Date/Time OK . . . then
Set the date:
¤
Set the time:
¤
Save settings:
¤
Date: . . . use
to enter the day, month and year in 8-digit format
e. g.
for 14/01/2016
Time . . . use
to enter hours and minutes in 4-digit format
e. g.
for 07:15
Save
Changing the display language
¤
OK
Language
OK
Select languages
Select (
= selected)
Setting your country and local area codes
Template bintec-elmeg, Version 1, 01.07.2014
Your area code (international and local area code) must be saved
on the phone before you can transfer phone numbers (e.g. in
vCards). Some of these numbers are already preset. Please ensure
that the prefix is correctly separated from the rest of the area code.
¤
OK
Telephony OK
Area Codes OK
Navigate to the entry field, delete the number using
if
needed Enter the number Save
Example
Area Codes
International code:
00 - 49
Local area code:
0 - [8
]
Save
20
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
bintec elmeg
Adjusting the telephone settings
Adjusting the handset display settings
Setting a screensaver
You can set a screensaver for the display when in idle status. You
can choose from an analogue clock, a digital clock or an image.
To show the display in idle status, briefly press
.
Example
¤
Activation
<On>
Selection:
Analog Clock
¤
OK
Display OK
Screensaver (
= activated) Edit
Activation:
On / Off
Selection:
Digital Clock / Analog Clock / [Images]
Or:
View (View screensaver)
Select screensaver
Save
OK
Screensaver
Back
Save
Setting the colour scheme
You can set the display to show a dark or a light background.
¤
OK
Display OK
Colour Schemes OK
Colour Scheme 2 Select ( = selected)
Colour Scheme 1 /
Setting the display backlight
The display backlight is always lit when the handset is not in the base/charging cradle or when
a key is pressed. Any digit keys pressed appear on the display for pre-dialling.
You can also activate/deactivate the display backlight for idle status:
¤
OK
Display OK
Backlight OK
In Charger:
On / Off
Out of Charger:
On / Off
¤ Save
Template bintec-elmeg, Version 1, 01.07.2014
The handset's standby time can be significantly reduced if the display backlight is activated.
Activating/deactivating visual call
Incoming calls are signalled visually (e.g. in noisy environments).
¤
OK
Telephony OK
LED Call Signal Change (
= activated)
Please note: Changes are only saved permanently in Profile Personal ( page 33).
elmeg D151R
21
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
Adjusting the telephone settings
bintec elmeg
Activating/deactivating automatic keypad lock
Automatically lock the keypad when the handset has been in idle status for around 15 seconds.
¤
. . . use
to select
Settings
OK
Display & Keypad OK
Auto
Keypadlock Change ( = on)
Keypad lock with PIN protection:
Set the handset PIN
Changing the handset PIN
The handset is protected against unauthorised use by a PIN (default setting: 0000). The handset
PIN must be entered e.g. when deactivating the keypad lock or when entering Bluetooth
connections.
Change the telephone's 4-digit PIN (default setting: 0000):
¤
. . . use
to select
Settings
OK
System OK
Handset PIN
OK . . . use
to enter the current handset PIN OK . . . use
to enter new handset
PIN OK
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as you remove it from
the charging cradle.
¤
OK
Telephony OK Auto Answer Change (
= activated)
Regardless of the setting Auto Answer, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold
for a further 2 seconds while placing
the handset in the charging cradle.
Changing the earpiece and speaker volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
During a conversation
¤
Handset Volume
. . . use
to select volume
Save . . . the setting is saved
Template bintec-elmeg, Version 1, 01.07.2014
The setting is automatically saved after around 3 seconds without saving.
22
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
bintec elmeg
Adjusting the telephone settings
In idle status
¤
. . . use
to select
Volume OK . . . then
For the earpiece:
For the speaker:
Save settings:
¤
¤
¤
Settings
OK
Audio Settings
OK
Handset
Earpiece: . . . use
to set the volume
Speaker . . . use
to set the volume
Save
Changes are only saved permanently in Profile Personal.
Earpiece and handsfree profile
Select a profile for the earpiece and handsfree mode in order to adapt the telephone as much
as possible to the surroundings. Check which is the most comfortable profile for you and your
caller.
¤
. . . use
to select
Settings OK
Audio Settings OK
Acoustic
Profiles
Earpiece Profiles / Handsfree Profiles OK . . . use
to select profile
Select ( = selected)
Earpiece Profiles: High or Low (default setting)
Handsfree Profiles: Profile 1 (default setting) . . . Profile 2
Setting the handset ringtones
Setting the ringtone volume
Example
OK
Audio Settings OK
Ringtones
Volume
(Handset) OK Volume OK
For internal calls
¤ For internal calls and alarms:
Volume can be set at 5 levels or crescendo (increasing volume) and alarms:
for internal calls and anniversaries.
<
?>
¤ External Calls:
External Calls:
Volume can be set at 5 levels or crescendo (increasing volume)
?
for external calls.
¤ Save
Back
When the telephone rings, you can permanently change the ringtone volume using the side keys
(louder) or
(quieter).
Please note: Changes are only saved permanently in Profile Personal ( page 33).
Template bintec-elmeg, Version 1, 01.07.2014
¤
elmeg D151R
Save
23
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
Adjusting the telephone settings
bintec elmeg
Setting the ring melody
¤
¤
¤
¤
OK
Audio Settings
Melodies OK
Internal Calls:
External Calls:
Save
OK
Ringtones (Handset)
OK
Setting the volume/melody for internal calls and anniversaries.
Setting volumes/melodies for external calls.
Activating/deactivating the ringtone
Deactivating the ringtone permanently: Using the Profile key
page 33).
appears in the status bar.
Activating the ringtone permanently: Using the Profile key,
Personal ( page 33).
Deactivating the ringtone for a current call: Press Silence or
, set the Profile Silent (
set the Profile Loud or Profile
.
Silent alert
Incoming calls and other messages are indicated by a silent alert.
¤
OK
Audio Settings OK
Silent Alert Change (
= activated)
Please note: Changes are only saved permanently in Profile Personal ( page 33). This setting
is saved in the Profile Silent.
Activating/deactivating advisory tones
Your handset uses advisory tones to tell you about different activities and statuses. These
advisory tones can be activated/deactivated independently of each other.
Template bintec-elmeg, Version 1, 01.07.2014
¤
¤
OK
Audio Settings
OK
Advisory Tones
OK
Key Tones:
On / Off
Tone when keys are pressed.
¤ Confirmation: On / Off
Confirmation/error tone after making entries, advisory tone when a new message has been
received.
¤ Battery: On / Off
Warning tone when there are fewer than 10 minutes of talktime remaining (every 60 seconds). There is no battery warning when the room monitor is activated.
¤ Out of Range: On / Off
Warning tone when the handset is moved out of range of the base station.
¤ Save
Please note: Changes are only saved permanently in Profile Personal ( page 33).
24
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
bintec elmeg
Adjusting the telephone settings
Protection against unwanted calls
Setting time control for external calls
You can specify a time period when you do not want the telephone
to ring.
¤
OK
Audio Settings OK
Ringtones
(Handset) OK
Time Control OK
¤
For external calls:
On / Off
If activated:
Suspend ring. from: Enter the start of the period.
Suspend ring. until: Enter the end of the period.
¤ Save
Example
Time Control
For external calls:
On
Suspend ring. from:
22:00
Suspend ring. until:
07:00
Back
Save
During this period, your phone will continue to ring for numbers to which you have
assigned a VIP ringtone in the phonebook.
Protection from anonymous callers
You can set your phone so that it doesn't ring for anonymous calls (callers who have withheld
Calling Line Identification). The call is only signalled on the display. The setting only applies to
handsets for which the setting is configured.
¤
OK
Audio Settings OK
Ringtones (Handset) OK
Anon.
= function activated)
Calls Silent Change (
Switch off ringtone when in charging cradle
Template bintec-elmeg, Version 1, 01.07.2014
The handset will not ring when placed in the charging cradle. The call is only indicated on the
display.
¤
. . . use
to select
Settings OK
Audio Settings OK
Ringtones (Handset) OK Silent Charging Change ( = ringtone is switched
off when in charging cradle)
elmeg D151R
25
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
Adjusting the telephone settings
bintec elmeg
Quick access to numbers and functions
The digit keys
and
up to
can be assigned to a number from the phonebook.
The left and right display keys have a function preset by default, but the keys can be reassigned ( page 26).
You can then dial the number or start the function by simply pressing a key.
Assigning digit keys
Prerequisite: You must assign a number to the digit key.
¤ Press and hold the digit key.
Or:
Briefly press the digit key. Press the display key QuickDial.
¤ The phonebook opens.
Select entry. OK
The entry is saved to the corresponding digit key.
If you delete or edit the entry in the phonebook at a later date, this will not affect the
assignment to the number key.
Selecting numbers/changing an assignment
Prerequisite: You must have assigned a number to the digit key.
When the handset is in idle status
¤ Press and hold the digit key: The number is dialled immediately.
Or:
¤ Briefly press the digit key: Press the left-hand display key with the number/name
(abbreviated if necessary) to dial the number.
Or:
Press the display key Change to change the key assignment, or
press the display key Clear Key to delete the assignment.
Assigning display keys
¤
Template bintec-elmeg, Version 1, 01.07.2014
In idle status, press and hold the left or right-hand display key.
assignments is opened.
Select entry OK
Choose from the following functions:
Room Monitor
Set and activate the room monitor ( page 37).
Alarm Clock
Set and activate the alarm clock ( page 36).
Calendar
Open calendar ( page 34).
One Touch Call
Set up one touch call( page 18).
Redial
Show redial list ( page 17).
Spot LED:
LED light (torch function) on/off ( page 33).
More Functions...
You can also choose further functions:
Call Lists
26
The list of possible key
Show call list ( page 32).
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
bintec elmeg
Adjusting the telephone settings
Changing the name of a connection (line)
(only on a CAT-iq router)
¤
. . . use
to select
Settings OK
Telephony OK
Connections OK . . . all available connections (lines) are displayed
. . . use
to select
connection OK
Connection Name OK . . . use
to change the name of the
connection Save
Assigning handsets to a connection (line)
(only on a CAT-iq router)
Multiple handsets can be assigned to a connection. Incoming calls to the number designated
to a connection will be forwarded to all handsets assigned to the connection.
¤
. . . use
to select
Settings OK
Telephony OK
Connections OK . . . use
to select connection OK
Assigned Handsets . . .
all registered handsets are displayed . . . use
to select handset
Change ( = handset is assigned)
Permit/prevent multiple calls
(only on a CAT-iq router)
If the function is activated, multiple calls can be made in parallel.
¤
. . . use
to select
Settings OK
Telephony
Connections OK . . . use
to select connection OK
Change ( = on)
OK
Multiple Calls
Template bintec-elmeg, Version 1, 01.07.2014
Permit/prevent internal listening in
(only on a CAT-iq router)
If the function is enabled, an internal party can listen in to an external call and take part in the
conversation (conference).
¤
. . . use
to select
Settings OK
Telephony OK
Connections OK . . . use
to select connection OK
Listening In OK
Change ( = on)
Handset update
(only on a CAT-iq router which supports updating of the handset firmware)
¤
. . . use
to select
Settings OK
System OK
Handset
Update OK Update OK OK . . . updating of the handset firmware is carried out
elmeg D151R
27
elmeg D151R / eng / elmeg D151R_V1 / settings.fm / 8/11/16
Restoring phone to default setting
bintec elmeg
Restoring phone to default setting
You can reset individual modifications to handset settings.
The following are not affected by the reset:
• Date / time,
• Registration of handsets to the base and the current selection of the base,
• Entries in the calendar and phonebook,
• Redial list.
When resetting the handset (Handset Reset), audio and display settings will be deleted.
Resetting the handset
Template bintec-elmeg, Version 1, 01.07.2014
¤
28
OK
System
OK
Handset Reset
OK
Confirm security prompt
with Yes
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / Register-HS.fm / 8/11/16
bintec elmeg
Multiple handsets
Multiple handsets
Making internal calls
Internal calls to other handsets registered to the same base are free of charge.
¤
(press briefly) The list of handsets is opened. Your own handset is marked <.
Select the handset or Call all (group call) from the list if required.
Holding down
immediately starts a call on all registered handsets.
Internal consultation/internal transfer
You receive a call from an external participant and would like to transfer the call to an internal
participant or wish to consult him/her.
¤
The list of handsets is opened. If more than two handsets are registered to the base,
select one handset or Call all.
or OK
Holding a consultation call: You are speaking to the internal participant and are returning to
End active call OK
your external call: Options
Transferring an external call: You have two options to transfer the call:
¤ Wait until the participant called answers, then hang up:
Press the End call key
.
Or:
¤ Hang up before the participant calls: Press the End call key .
If the participant called does not answer of does not transfer the call, end the consultation with
End.
Establishing a conference call/call swapping
Template bintec-elmeg, Version 1, 01.07.2014
You are taking a call while a second call is being held. Both callers are indicated on the display.
¤ Call swapping: You can switch between both participants using .
¤ Establishing a three-way conference call: Press Conf.
Ending a conference call: Press End Conf. You are reconnected with the external participant.
You can switch again between both participants using
.
Each of the callers can end their participation in the conference call by pressing the End call
key
.
Accepting/rejecting call waiting
If you get an external call while conducting an internal call, you will hear the call waiting tone.
If the number is transferred, you will see it or the name of the caller on the display.
¤ Rejecting a call: Press the display key Reject.
¤ Accepting a call: Press the display key Accept. You are now speaking to the new caller.
The previous call is placed on hold.
Ending the current call and returning to the call on hold:
Options
End active call OK.
elmeg D151R
29
elmeg D151R / eng / elmeg D151R_V1 / directory.fm / 8/11/16
Phonebook (Address book)
bintec elmeg
Phonebook (Address book)
In a phonebook entry, you can store first names and surnames, up to three numbers, an
anniversary with a reminder, and caller melody.
You can create the directory (with up to 200 entries) individually for each of your handsets. You
can also send lists/entries to other handsets ( page 31).
Length of the entries
3 numbers:
First name and surname:
Max. 32 digits each
Max. 16 characters each
Managing directory entries
Opening phonebook
Press the key
in idle status or, depending on the situation, the display key
.
Creating a new entry
¤
¤
Open directory.
<New Entry> OK
Switch between the input fields using
and enter the relevant
components of the entry (names, numbers, anniversary, ringtone).
Navigate downwards to display further components.
¤ Press the display key Save.
To create an entry, you must enter at least one number.If you have
assigned a caller melody, the entry in the phonebook is supplemented with the symbol VIP.
Example
New Entry
First Name:
Robert
Surname:
I
Phone (Home):
Abc
‚
Save
Displaying/changing an entry
¤
Open phonebook.
entry. Edit
Select the desired entry.
View
Display all components of the
Or:
Template bintec-elmeg, Version 1, 01.07.2014
¤
Options
Edit entry
OK
Deleting an entry
¤
Open phonebook.
Select the desired entry. Options
Delete all entries in the directory:
¤ Open phonebook. Options
Delete List OK
30
Delete entry
OK
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / directory.fm / 8/11/16
bintec elmeg
Phonebook (Address book)
Defining the order of the contacts entries
You can define whether the entries are to be sorted by first name or surname.
¤ Open phonebook. Options Press Sort by Surname or Sort by First Name.
If no name was entered, the default number is shown in the surname field. These entries appear
at the beginning of the list, regardless of how the entries are sorted.
The sort order is as follows:
Space | Digits (0-9) | Letters (alphabetical) | Other characters
Displaying the number of entries that are available in the
directory
¤
Open phonebook.
Options
Available Memory
OK
Selecting a phonebook entry, searching in the phonebook
¤
¤
Open phonebook.
Scroll to the name you are searching for using
. Holding down
upwards or downwards through the phonebook.
scrolls continuously
Or:
¤
Enter the first few letters (max. 8 letters) using the keypad. The display jumps to the first
name that begins with these letters. If necessary, scroll on to the desired entry using
.
Transferring an entry/phonebook to another handset
Prerequisites:
• The sending and receiving handsets must both be registered to the same base.
• The other handset and the base can send and receive directory entries.
You can transfer the entire directory, an individual entry or several individual entries.
• An external call interrupts the transfer.
• Caller pictures and sounds are not transferred. Only the date is transferred for an
anniversary.
Template bintec-elmeg, Version 1, 01.07.2014
• When transferring an entry between two vCard handsets:
If the recipient does not yet have an entry with that name, a new entry is created.
If there is already an entry with that name, this entry is expanded with the new
numbers. If the entry contains more numbers than the recipient permits, a further
entry is created with the same name.
• If the recipient is not a vCard handset: A separate entry is created and sent for each
number.
• Your handset receives entries from a non-vCard handset: Entries with numbers
that are already stored are discarded, otherwise a new entry is created.
Transferring individual entries
¤
Open phonebook.
Select the desired entry. Options
to Internal OK
Select the recipient handset. OK
elmeg D151R
Copy Entry
OK
31
elmeg D151R / eng / elmeg D151R_V1 / directory.fm / 8/11/16
Call list
bintec elmeg
Transferring the entire directory
¤
Open phonebook.
Select the desired entry.
Internal OK
Select the recipient handset.
Options
OK
Copy List
OK
to
Transferring a displayed number to the phonebook
¤
¤
¤
The number is displayed or highlighted.
Press display key
or Options
Copy to Directory. OK
¤ <New Entry> OK
Select number type. OK Complete the entry. OK
Or:
¤
Select entry. OK
Select number type. OK The number is entered or an
existing number is overwritten (answer the prompt using Yes/No).
Save
Call list
Your telephone stores calls in various lists. Opening the lists:
• Missed calls list: Message key
Missed Calls: OK
• List selection:
OK
Select list. OK
Template bintec-elmeg, Version 1, 01.07.2014
List entry
The following information is displayed in the list entries:
Example
• The list type (in the header row)
All calls
• Icon for the type of entry:
(Missed calls),
(Accepted calls),
(Outgoing calls)
™ äJames Foster
Today, 18:35
• Caller's number. If the number is stored in the phonebook,
name and number type are displayed instead ( Phone
™ 01712233445566
(Home), Phone (Office), Phone (Mobile)). For missed calls,
11/06/2016, 18:30
the number of missed calls from this number is also shown in
š 0168123477945
square brackets.
10/06/2016, 17:13
• Date and time of call (if set).
View
Options
Select entry. Options
View: All available information is displayed, e.g. the corresponding number when a name is displayed.
Options: You can delete the entry or transfer the number to the phonebook ( page 32).
Calling back a caller from the call list:
¤
Select entry. Press the Answer call key
.
32
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / applications.fm / 8/11/16
bintec elmeg
Sound profiles
Sound profiles
You can call up the 3 sound profiles that are adapted for your handset to your surroundings
consecutively by using the
key. The profile is switched immediately without a prompt. By
default, Profile Personal is activated.
¤
Profile Loud
Profile Silent
The profiles are set as follows by default:
Profile
Loud
On
Default setting
Silent alert ( page 24)
Ringer ( page 24)
Ringtone volume (
page 23)
Profile Personal
Internal
External
Handset volume ( page 19) Handset
Handsfree
LED light for a call ( page 21)
Simple Auto Answer ( page 18)
Advisory tones ( page 24) Key click
Confirmation
tone
Battery tone
Profile
Personal
Off
On
5
Profile Silent
like
Profile
Personal
Off
Off
5
5
5
Yes
Yes
Yes
Yes
Off
3
3
No
No
No
No
3
3
3
No
No
Yes
Yes
Yes
Yes
Yes
On
3
When switching to Profile Silent you can activate an alert tone by pressing the Beep display key.
appears in the status bar.
Changes in Profile Loud and Profile Silent only apply provided that the profile is not changed
(by pressing the
Profile key). Changes to Profile Personal are stored permanently for this
profile.
The set profile remains set when switching the phone off and back on.
Template bintec-elmeg, Version 1, 01.07.2014
Spot LED
You can use your telephone as a torch.
Activating/deactivating the torch function
¤
Press the Spot LED display key ( page 26).
Or:
¤
OK Spot LED OK
After 2 minutes the function is automatically deactivated or press the OFF display key.
elmeg D151R
33
elmeg D151R / eng / elmeg D151R_V1 / applications.fm / 8/11/16
Calendar
bintec elmeg
Calendar
You can remind yourself of up to 30 appointments.
In the calendar, the current day is outlined in white; on days with
appointments, the numbers are displayed in colour. When a day is
selected, it will be highlighted.
July 2016
Mo Tu We Th Fr Sa Su
01 02 03
04 05 06 07 08 09 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
Back
OK
Saving appointments to the calendar
Prerequisite: Date and time are set ( page 11).
¤
OK
Calendar OK
Select the desired day. OK
• Appointments that have already been stored are shown.
<New Entry> OK opens the window to enter an additional appointment.
• If no appointments have been entered, the data input window will open immediately to add
the new appointment.
Activation:
On/Off
The following information can be added:
• Date: The selected day is preset. Enter new data to change.
• Time: Time (hour and minute) of the appointment.
• Text: Appointment name (e.g. dinner, meeting).
• Signal:
Select the melody of the reminder signal or deactivate the acoustic signalling.
¤ Save
Template bintec-elmeg, Version 1, 01.07.2014
Signalling of appointments/anniversaries
Anniversaries are transferred from the phonebook and displayed as an appointment. An
appointment/anniversary is displayed in idle status and signalled for 60 seconds with the
selected ringtone.
You can deactivate the reminder call:
¤ Press OFF to acknowledge and end the reminder call.
When you are on the phone, a reminder call is indicated on the handset with a single advisory
tone.
During the reminder call you can turn the ringtone volume
(up) or
(down) continuously
using the side keys.
34
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / applications.fm / 8/11/16
bintec elmeg
Calendar
Displaying missed appointments/anniversaries
The following appointments and anniversaries are stored in the Missed Alarms list:
• The appointment/anniversary call was not acknowledged.
• The appointment/anniversary was signalled during a phone call.
• The handset was switched off at the time of the appointment/anniversary.
The last 10 entries are stored. The
icon and the number of new entries are shown in the
display. The most recent entry appears at the head of the list.
To open the list: Message key
Missed Alarms OK
Or via the menu:
OK
Missed Alarms OK
scroll in the list if required
Information about the appointment/anniversary is displayed. You can:
Delete an appointment/anniversary: Delete
Displaying/changing/deleting stored appointments
¤
¤
OK
Calendar OK
Select the desired day. OK
list is displayed.
Select the desired appointment.
View: Display appointment settings, change, if required using Edit.
The appointment
Or:
Template bintec-elmeg, Version 1, 01.07.2014
¤
Options: Change settings or delete appointments.
• Edit entry OK
• Delete entry OK
• Activate/Deactivate OK
• Delete all Appoints. OK Confirm prompt with Yes.
All appointments for the selected day are deleted.
elmeg D151R
35
elmeg D151R / eng / elmeg D151R_V1 / applications.fm / 8/11/16
Alarm clock
bintec elmeg
Alarm clock
Prerequisite: Date and time are set ( page 11).
Example
You can activate/deactivate and set the alarm clock as follows:
Alarm Clock
¤
OK Activation:
On/Off
Activation:
¤ Changing the settings:
• Time: Set the hour and minute for the wake-up time (time set- <On>
Time:
ting page 11).
12:00
• Occurrence:
Daily/Monday-Friday
Occurrence:
• Volume:
Volume can be set at 5 levels or crescendo
Monday-Friday
(increasing volume).
‚
• Melody:
Select a ringtone for the alarm call.
Back
Save
¤ Press the display key Save.
When the alarm clock is activated, the icon
and the alarm time is displayed in idle status.
An alarm call is signalled in the display and with the selected ringtone for a maximum of
60 seconds. During a call, the wake-up call is only signalled by a short tone.
During the sounding of the alarm you can turn the volume
(up) or
(down) continuously
using the side keys.
Deactivating the alarm call/repeating after a pause (snooze mode)
Prerequisite: One alarm call sounds.
¤ Deactivating until the next alarm call: Press OFF.
Or:
¤ Snooze mode:
Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated after
5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.
Template bintec-elmeg, Version 1, 01.07.2014
Room monitoring
When the room monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset. The alarm to an
external number is cancelled after approximately 90 seconds.
You can answer the alarm using the Two Way Talk function. This function is used to switch the
loudspeaker of the handset located in the room being monitored on or off.
In room monitor mode, incoming calls are only indicated on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated. All keys are locked, with the
exception of the display keys and the ability to press the centre of the control key.
If you accept an incoming call, the room monitor mode is suspended for the duration of the call,
but the function remains activated. The room monitor mode is not deactivated by switching
the handset off and on again.
36
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / applications.fm / 8/11/16
bintec elmeg
Room monitoring
The handset should be positioned 1 to 2 metres away from the area of the room being
monitored. The microphone must point towards the area of the room being
monitored.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The room monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤ Test sensitivity.
¤ Test the connection, if the alarm is being forwarded to an external number.
Activating and setting the room monitor
¤
. . . use
to select
Additional Features
Room Monitor OK . . . then
OK
Switch on/off:
¤ Activation: . . . use
to select On or Off
Enter destination:
¤
Send alarm to . . . use
to select External or Internal
External:
Number
. . . use
to enter the number
or select a number from the directory:
Internal:
Handset Change . . . use
to select
the handset OK
Room Monitor activated
07:15
14 Oct
INT 1
Room Monitor
0891234567
OFF
Options
Activate/deactivate two-way talk:
¤
Two Way Talk . . . use
to select On or Off
Set microphone sensitivity:
¤
Sensitivity . . . use
to select High or Low
Save settings: Save
Template bintec-elmeg, Version 1, 01.07.2014
The destination number is displayed in idle display when the room monitor is activated.
elmeg D151R
37
elmeg D151R / eng / elmeg D151R_V1 / applications.fm / 8/11/16
Room monitoring
bintec elmeg
Switching off/interrupting the alarm
Switch off the alarm:
Interrupt the alarm:
¤
¤
In idle status press the display key OFF
Press the End call key
during an alarm
Deactivating the alarm remotely
Prerequisites:
• The alarm is forwarded to an external destination number.
• The receiving phone supports tone dialling.
• If the alarm is activated via a VoIP connection, the DTMF signalling must take place via SIP
info or RFC2833 ( setting on the base station).
¤
Template bintec-elmeg, Version 1, 01.07.2014
Accept alarm call
Press keys
. . . the call is ended
The alarm is deactivated and the handset is in idle status. The room monitor settings on the
handset (e.g. no ringtone) will remain activated until you press the display key OFF.
Reactivate room monitor with the same number:
. . . Reactivate ( page 37) Save
38
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / symbols.fm / 8/11/16
bintec elmeg
Display icons
Display icons
Icons in the status bar
The following icons are displayed in the status bar depending on the settings and the operating
status of your telephone:
Icon
Icon
Meaning
Signal strength (No Radiation off )
Ð
i
Ñ
Ò
¼
¼
ó
ñ
˝
76% - 100%
51% - 75%
26% - 50%
1% - 25%
}
White, if Maximum Range is on;
Green, if Maximum Range is off
Red: no connection to the base
No Radiation activated:
white, if Maximum Range is on;
green, if Maximum Range is off
Profile Silent activated (The ringtone
is switched off)
"Beep" ringtone activated
Key lock
U
V
e
=
=
Meaning
Battery charge status:
White: charged over 66%
White: charged between 34 and 66%
White: charged between 11 and 33%
Red: charged below 11%
Flashes red: battery almost empty
(approx. 5 minutes talktime remaining)
Battery is charging
(current charge status):
= 0% - 10%
e 11%–33%
V 34% - 66%
U 67% - 100%
Menu icons
ì
Ê
þ
Alarm Clock
Call Lists
Answer Machine
ê
É
Ï
Select Services
Additional Features
Settings
Template bintec-elmeg, Version 1, 01.07.2014
Display key icons
The following icons indicate the current function of the display keys according to the operating
situation:
Icon
Þ
Û
elmeg D151R
Action
Last number redial
Deleting text
Icon
Â
ß
Action
Opening phonebook
Copy number to the phonebook
39
elmeg D151R / eng / elmeg D151R_V1 / symbols.fm / 8/11/16
Display icons
bintec elmeg
Display icons for signalling of
z
Establishing a call
(outgoing call)
W
Connection
established
X
ØÙÚ
External call
ØãÚ
Internal call
ØðÚ
Øá Ú
Reminder call for
appointment
ØìÚ
Alarm call
No connection
established/
connection terminated
Reminder call for
anniversary
Other display icons
Ð
Template bintec-elmeg, Version 1, 01.07.2014
‰
40
Information
Action complete
(green)
·
(Security) prompt
Õ
Action failed (red)
Û
Please wait...
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / menutree.fm / 8/11/16
bintec elmeg
Menu tree
Menu tree
Opening the main menu: Press
whilst the telephone is in idle status.
Not all functions are available on all base stations, in all countries or from all
network providers.
Depending on the number and type of available functions, you can display menus at
top level or in a submenu, e. g. Audio Settings may be in a top-level menu or the Settings submenu.
ì Alarm Clock
Ê Call Lists
þ Answer Machine
ê Select Services
É Additional Features
£ page 36
(depending on base)
(depending on base)
(depending on base)
Missed Alarms
£ page 33
£ page 34
£ page 36
£ page 18
£ page 35
Date/Time
£ page 11
Spot LED
Calendar
Room Monitor
One Touch Call
Ï Settings
Audio Settings
Handset Volume
Acoustic Profiles
Advisory Tones
Silent Alert
Ringtones (Handset)
£ page 19
£ page 23
£ page 24
£ page 24
£ page 23
(further submenus depending on base)
Display
Auto Keypadlock
£ page 21
£ page 21
£ page 21
£ page 22
Register Handset
£ page 11
Screensaver
Template bintec-elmeg, Version 1, 01.07.2014
Colour Schemes
Backlight
Language
Registration
£ page 20
(further submenus depending on base)
elmeg D151R
41
elmeg D151R / eng / elmeg D151R_V1 / menutree.fm / 8/11/16
Menu tree
bintec elmeg
Telephony
Auto Answer
Easy Acceptance
LED Call Signal
Area Codes
£ page 22
£ page 18
£ page 21
£ page 20
(further submenus depending on base)
System
Reset Handset
£ page 28
Template bintec-elmeg, Version 1, 01.07.2014
(further submenus depending on base)
42
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / appendix.fm / 8/11/16
bintec elmeg
Service (Customer Care)
Service (Customer Care)
Questions? For rapid assistance, refer to this user guide or visit bintec-elmeg.com.
The trade outlet will be happy to help with further questions relating to your elmeg D151 R.
Questions and answers
If you have any queries about the use of your telephone, suggested solutions are available on
our web-site at bintec-elmeg.com FAQ.
The table below also lists steps for troubleshooting.
You are not sure whether your device is equipped with an integrated answer machine.
¥
Open the answer machine menu:
OK
Your device is equipped with an integrated answer machine if the submenu Activation is available.
The display is blank.
1. The handset is not activated.
¥ Hold down .
2. The battery is empty.
¥ Charge the battery or replace it (
page 9).
3. The key and display lock is activated.
¥ Hold down the hash key .
"No Base" flashes on the display.
1. The handset is outside the range of the base.
¥ Move the handset closer to the base.
2. The base is not activated.
¥ Check the base power adapter.
3. The base's range is reduced because Maximum Range is deactivated.
¥ Activate Maximum Range or reduce the distance between the handset and base.
"Please register handset" or "Place handset in base" flashes on the display.
The handset has not yet been registered or was de-registered due to the registration of an additional handset (more than six DECT registrations).
¥ Register the handset again ( page 11).
Your settings are not accepted.
Template bintec-elmeg, Version 1, 01.07.2014
¥
Ensure that you have set the Profile Personal before you make changes to the device settings (
page 33).
The handset does not ring.
1. The ringtone is deactivated.
¥ Activate ringtone ( page 24).
2. Call forwarding is set.
¥ Deactivate call forwarding.
3. The phone does not ring if the caller has withheld his number.
¥ Activate the ringtone for unknown calls ( page 25).
4. The phone does not ring during a specific period or for certain numbers.
¥ Check time control for external calls ( page 25) .
elmeg D151R
43
elmeg D151R / eng / elmeg D151R_V1 / appendix.fm / 8/11/16
Appendix
bintec elmeg
The other party cannot hear you.
The handset is "muted".
¥ Activate the microphone again (
page 19).
The caller's number is not displayed.
1. Calling Line Identification (CLI) is not approved for the caller.
¥ The caller should ask the network provider to enable Calling Line Identification (CLI).
2. Caller display (CLIP) is not supported by the network provider or is not enabled for you.
¥ Caller display (CLIP) is enabled by the network provider.
3. Your telephone is connected via a PABX or a router with an integrated PABX (gateway) that does not
transmit all information.
¥ Reset the system: Briefly pull out the power plug. Reinsert the plug and wait until the device restarts.
¥ Check the settings on the PABX and activate phone number display, if necessary. To do this, search
for terms such as CLIP, calling line identification, phone number identification, caller ID, etc. in the
system's user guide or ask the system manufacturer.
You hear an error tone when keying an input.
Action has failed/invalid input.
¥ Repeat the process.
Read the display and refer to the user guide if necessary.
You cannot listen to messages on the network mailbox.
Your PABX is set to pulse dialling.
¥ Set your PABX to tone dialling.
Authorisation
This device is intended for use worldwide. Use outside the European Economic Area (with the
exception of Switzerland) is subject to national approval.
Country-specific requirements have been taken into consideration.
We, bintec elmeg GmbH, declare that this device meets the essential requirements and other
relevant regulations laid down in Directive 1999/5/EC.
A copy of the Declaration of Conformity is available at this Internet address:
bintec-elmeg.com/conformity
Template bintec-elmeg, Version 1, 01.07.2014
Appendix
Care
Wipe the device with a damp cloth or an antistatic cloth. Do not use solvents or microfibre
cloths.
Never use a dry cloth; this can cause static.
In rare cases, contact with chemical substances can cause changes to the device’s exterior. Due
to the wide variety of chemical products available on the market, it was not possible to test all
substances.
Impairments in high-gloss finishes can be carefully removed using display polishes for mobile
phones.
44
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / appendix.fm / 8/11/16
bintec elmeg
Appendix
Contact with liquid
Your handset is splash proof.
If it comes into contact with water, knock the water out of the microphone opening and remove
any water on the handset with an absorbent cloth. Your handset is ready for use.
If your handset comes into contact with a larger amount of liquid take the following steps:
1 Disconnect the power supply.
2 Remove the batteries and leave the battery compartment open.
3 Allow the liquid to drain from the device.
4 Pat all parts dry.
5 Place the device in a dry, warm place for at least 72 hours (not in a microwave, oven etc.)
with the battery compartment open and the keypad facing down (if applicable).
6 Do not switch on the device again until it is completely dry.
When it has fully dried out, you will normally be able to use it again.
Technical data
Batteries
Technology: 2 x AAA NiMH
Voltage:
1.2 V
Capacity:
800 mAh
Handset operating times/charging times
The operating time of your handset depends on the capacity and age of the battery and the way
it is used. (All times are maximum possible times).
Standby time (hours) *
310 *
200 **
Talktime (hours)
14
Operating time for 1.5 hours of calls per day (hours) *
130 *
100 **
Charging time in charging cradle (hours)
7.5
Template bintec-elmeg, Version 1, 01.07.2014
*No Radiation deactivated, without display backlight in idle status
**No Radiation activated, without display backlight in idle status
Power consumption of the handset in the charging cradle
When charging:
approx. 1.5 W
To maintain the charge status:
approx. 0.5 W
elmeg D151R
45
elmeg D151R / eng / elmeg D151R_V1 / appendix.fm / 8/11/16
Appendix
bintec elmeg
General specifications
DECT
DECT standard
Supported
CAT-iq standard
Certified in accordance with standard CAT-iq 2.0 with HD Voice
dect.org/cat-iq-certification.aspx
GAP standard
Supported
No. of channels
60 duplex channels
Radio frequency range
1880-1900 MHz
Duplex method
Time division multiplexing, 10 ms frame length
Repetition frequency of the transmis- 100 Hz
sion pulse
Duration of the transmission pulse
370 μs
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission power
10 mW average power per channel, 250 mW pulse power
Range
Up to 50 m indoors, up to 300 m outdoors
Environmental conditions for operation
+5°C to +45°C, 20% to 75% relative humidity
Character charts
Standard characters
Template bintec-elmeg, Version 1, 01.07.2014
Press the relevant key the number
of times indicated.
46
2
3
4
5
L
M
N
O
Q
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
1
a
d
g
j
m
p
t
w
b
e
h
k
n
q
u
x
c
f
i
l
o
r
v
y
2
3
4
5
6
s
8
z
ä
ë
ï
á
é
í
à
è
ì
â
ê
î
ã
ç
ö
7
ü
9
ñ
ß
ú
ÿ
ó
ò
ô
õ
ù
ý
û
æ
ø
å
.
,
?
!
1)
2)
0
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / HSGSIX.fm / 8/11/16
bintec elmeg
Index
Index
A
Address book, see Phonebook
Advisory tones . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Alarm (room monitor)
switch off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Anniversary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
displaying missed . . . . . . . . . . . . . . . . . . . . . . 35
Anonymous calls off . . . . . . . . . . . . . . . . . . . . . . 25
Answer call key . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Answer machine
answer machine list . . . . . . . . . . . . . . . . . . . . 15
Appointment
displaying missed . . . . . . . . . . . . . . . . . . . . . . 35
Area code
setting own area code . . . . . . . . . . . . . . . . . . 20
Assigning number key . . . . . . . . . . . . . . . . . . . . 26
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Auto Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
simple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
B
Backlight, display . . . . . . . . . . . . . . . . . . . . . . . . 21
Base
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Base station
changing the settings . . . . . . . . . . . . . . . . . . 20
Battery
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
charging status . . . . . . . . . . . . . . . . . . . . . . . . 39
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Birthday, see Anniversary
Broken display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Template bintec-elmeg, Version 1, 01.07.2014
C
Call
accepting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
accepting automatically . . . . . . . . . . . . . . . . . 22
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
transferring (connecting) . . . . . . . . . . . . . . . . 29
transferring internally (connecting) . . . . . . . 29
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
deleting an entry . . . . . . . . . . . . . . . . . . . . . . 32
Call protection . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Call signal, visual . . . . . . . . . . . . . . . . . . . . . . . . . 21
elmeg D151R
Call waiting
external during an internal call . . . . . . . . . . . 29
internal during an external call . . . . . . . . . . . 29
Calling
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Care of the device . . . . . . . . . . . . . . . . . . . . . . . . 44
Changing
display language . . . . . . . . . . . . . . . . . . . . . . 11
handset PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Changing the phone settings . . . . . . . . . . . . . . 20
Changing the settings . . . . . . . . . . . . . . . . . . . . 20
Character charts . . . . . . . . . . . . . . . . . . . . . . . . . 46
Charge status indicator . . . . . . . . . . . . . . . . . . . . 4
Charge status of the batteries . . . . . . . . . . . . . . 39
Charging cradle (handset)
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Charging time of handset . . . . . . . . . . . . . . . . . 45
Charging, silent . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Colour scheme . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Connecting the headset . . . . . . . . . . . . . . . . . . . 10
Connection
assigning handset . . . . . . . . . . . . . . . . . . . . . 27
changing name. . . . . . . . . . . . . . . . . . . . . . . . 27
Consultation call
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . 45
Contents of the package . . . . . . . . . . . . . . . . . . . 8
Control key . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 13
Correcting incorrect entries . . . . . . . . . . . . . . . . 16
Correction of incorrect entries . . . . . . . . . . . . . . 16
Customer Care . . . . . . . . . . . . . . . . . . . . . . . . . . 43
D
Default setting . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Dialling
from the call list . . . . . . . . . . . . . . . . . . . . . . . 17
using speed dial . . . . . . . . . . . . . . . . . . . . . . . 26
using the redial list . . . . . . . . . . . . . . . . . . . . . 17
with directory . . . . . . . . . . . . . . . . . . . . . . . . . 18
Directory
saving entry . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Display
backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
broken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
changing display language . . . . . . . . . . . . . . 11
colour scheme . . . . . . . . . . . . . . . . . . . . . . . . 21
47
elmeg D151R / eng / elmeg D151R_V1 / HSGSIX.fm / 8/11/16
Index
bintec elmeg
Display
network mailbox message . . . . . . . . . . . . . . . 15
phonebook memory . . . . . . . . . . . . . . . . . . . 31
screensaver . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
setting the backlight . . . . . . . . . . . . . . . . . . . 21
Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Display keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 14
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Displays
missed appointments/anniversaries . . . . . . . 35
E
Earpiece profile . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . 19
End call key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
End call/End key . . . . . . . . . . . . . . . . . . . . . . . . . 17
Ending a conference call . . . . . . . . . . . . . . . . . . 29
Entering special characters . . . . . . . . . . . . . . . . 16
Entering special letters . . . . . . . . . . . . . . . . . . . . 16
Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Entering umlauts . . . . . . . . . . . . . . . . . . . . . . . . 16
External call
transferring internally (connecting) . . . . . . . 29
External calls
time control for ringtone . . . . . . . . . . . . . . . . 25
F
Factory settings. . . . . . . . . . . . . . . . . . . . . . . . . . 28
Field strength . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Handset
screensaver . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
speaker volume . . . . . . . . . . . . . . . . . . . . . . . 19
switching on/off . . . . . . . . . . . . . . . . . . . . . . . 13
transferring a call . . . . . . . . . . . . . . . . . . . . . . 29
use as a room monitor . . . . . . . . . . . . . . . . . . 36
use for room monitoring . . . . . . . . . . . . . . . . 36
using multiple . . . . . . . . . . . . . . . . . . . . . . . . . 29
Handsfree mode . . . . . . . . . . . . . . . . . . . . . . . . . 18
Handsfree profile . . . . . . . . . . . . . . . . . . . . . . . . 23
Handsfree volume . . . . . . . . . . . . . . . . . . . . . . . 19
Hash key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Headset socket . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Hearing aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
I
Icons
alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
displaying new messages . . . . . . . . . . . . . . . 15
on display keys . . . . . . . . . . . . . . . . . . . . . . . . 39
status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Idle status
returning to. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Internal
making calls . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Internal call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Internal consultation call . . . . . . . . . . . . . . . . . . 29
Internal listening in . . . . . . . . . . . . . . . . . . . . . . . 27
G
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Template bintec-elmeg, Version 1, 01.07.2014
H
Handset
advisory tones . . . . . . . . . . . . . . . . . . . . . . . . 24
assigning connection . . . . . . . . . . . . . . . . . . . 27
automatic keypad lock . . . . . . . . . . . . . . . . . . 22
changing the PIN . . . . . . . . . . . . . . . . . . . . . . 22
changing the settings . . . . . . . . . . . . . . . . . . 20
colour scheme . . . . . . . . . . . . . . . . . . . . . . . . 21
connecting the charging cradle . . . . . . . . . . . 8
display backlight. . . . . . . . . . . . . . . . . . . . . . . 21
display language . . . . . . . . . . . . . . . . . . 11, 20
earpiece volume . . . . . . . . . . . . . . . . . . . . . . . 19
idle status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
muting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
registering . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
restoring to default setting . . . . . . . . . . . . . . 28
48
K
Key 1 (fast access) . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key, assigning to a function or number . . . . . . . 26
Keypad lock, automatic . . . . . . . . . . . . . . . . . . . 22
Keys
Answer call key . . . . . . . . . . . . . . . . . . . . . . . . . 4
control key . . . . . . . . . . . . . . . . . . . . . . . . . 4, 13
display keys . . . . . . . . . . . . . . . . . . . . . . . . . 4, 14
End call key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
End call/End key . . . . . . . . . . . . . . . . . . . . . . . 17
fast access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Hash key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Message key . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
On/off key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Profile key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Recall key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
elmeg D151R
elmeg D151R / eng / elmeg D151R_V1 / HSGSIX.fm / 8/11/16
bintec elmeg
Keys
side key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Star key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Volume key . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
L
Language
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
LED light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
List
accepted calls . . . . . . . . . . . . . . . . . . . . . . . . . 32
answer machine . . . . . . . . . . . . . . . . . . . . . . . 15
call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
outgoing calls . . . . . . . . . . . . . . . . . . . . . . . . . 32
List entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Locking/unlocking the keypad . . . . . . . . . . . . . 13
Lower/upper case . . . . . . . . . . . . . . . . . . . . . . . . 16
Template bintec-elmeg, Version 1, 01.07.2014
M
Making calls
accepting a call . . . . . . . . . . . . . . . . . . . . . . . . 18
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Managing the calendar . . . . . . . . . . . . . . . . . . . 34
Marked characters. . . . . . . . . . . . . . . . . . . . . . . . 16
Medical equipment . . . . . . . . . . . . . . . . . . . . . . . 6
Melody
ringtone for internal/external calls . . . . . . . . 24
Memory in the phonebook . . . . . . . . . . . . . . . . 31
Menu
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Message key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Message lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Microphone sensitivity . . . . . . . . . . . . . . . . . . . . 19
Missed anniversaries/appointments . . . . . . . . . 35
Missed call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Multiple calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Muting the handset . . . . . . . . . . . . . . . . . . . . . . 19
N
Number,copying to the phonebook . . . . . . . . . 32
Numbers, entering . . . . . . . . . . . . . . . . . . . . . . . 16
elmeg D151R
Index
O
On/off key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
One touch call . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Operating time of handset . . . . . . . . . . . . . . . . . 45
Order in the phonebook. . . . . . . . . . . . . . . . . . . 31
P
Phone
restoring to default setting . . . . . . . . . . . . . . 28
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
copying number from text . . . . . . . . . . . . . . . 32
opening. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
order of entries . . . . . . . . . . . . . . . . . . . . . . . . 31
sending entry/list to handset . . . . . . . . . . . . 31
sending to handset . . . . . . . . . . . . . . . . . . . . 31
Power adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Profile key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 33
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Protection against unwanted calls. . . . . . . . . . . 25
Protection from anonymous callers . . . . . . . . . . 25
Protection from calls
switch off ringtone when in charging
cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Q
Questions and answers . . . . . . . . . . . . . . . . . . . 43
R
Recall key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Registering (handset) . . . . . . . . . . . . . . . . . . . . . 11
Restoring to default setting . . . . . . . . . . . . . . . . 28
Restoring to factory settings . . . . . . . . . . . . . . . 28
Ringtone
changing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
melody for internal/external calls . . . . . . . . . 24
silencing for anonymous calls . . . . . . . . . . . . 25
switch off when in charging cradle . . . . . . . . 25
time control for external calls . . . . . . . . . . . . 25
Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Room monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Room monitoring . . . . . . . . . . . . . . . . . . . . . . . . 36
S
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . 6
Saving a number in the directory . . . . . . . . . . . 30
Screensaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
49
elmeg D151R / eng / elmeg D151R_V1 / HSGSIX.fm / 8/11/16
Index
bintec elmeg
Searching
in directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selecting an entry from the phonebook . . . . . . 31
Sending
phonebook entry to handset . . . . . . . . . . . . . 31
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting an appointment . . . . . . . . . . . . . . . . . . . 34
Setting options
phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting the date . . . . . . . . . . . . . . . . . . . . . 11, 41
Setting the display language . . . . . . . . . . . . . . . 20
Setting the time . . . . . . . . . . . . . . . . . . . . . 11, 41
Setting up
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Side key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Signal tone, see Advisory tones
Silent alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Silent charging . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Simple Auto Answer . . . . . . . . . . . . . . . . . . . . . . 18
Snooze mode (alarm) . . . . . . . . . . . . . . . . . . . . . 36
Sound profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Sound, see Ringtone
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Speed dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Star key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Switching microphone (handset) on/off . . . . . . 19
U
Upper/lower case . . . . . . . . . . . . . . . . . . . . . . . . 16
V
Viewing network mailbox message . . . . . . . . . . 15
VIP ringtone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Visual call signal . . . . . . . . . . . . . . . . . . . . . . . 4, 21
Volume
earpiece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
handset handsfree/earpiece volume . . . . . . 19
speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Volume key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
W
Warning tone, see Advisory tones
Template bintec-elmeg, Version 1, 01.07.2014
T
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Technical data, see Internet/CD
Telephone
operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Three-way conference call
ending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Time control
ringtone for external calls . . . . . . . . . . . . . . . 25
Torch function . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Transferring an external call internally . . . . . . . 29
Troubleshooting
general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
All rights reserved. Rights of modification reserved.
50
elmeg D151R