Product Data Sheet
TX-6310-03-1
Wireless CO Sensor 868AM Gen2
TX-6310-03-1 Wireless CO Alarm accurately and reliably alerts
residents of potentially dangerous levels of CO in their home. It
is suited for integration into an 868AM Gen2 intrusion system
depending on the firmware level (see specifications).
If a dangerous concentration of CO is detected by the patented
and field-proven electrochemical sensor, a LED indicator lights
up and an internal siren is activated in temporal 4 pattern.
In parallel the CO sensor also transmits an alarm signal to the
control panel within 15 seconds of detecting dangerous levels
of CO gas. The control panel activates its internal siren and
reports the alarm condition to the central monitoring station (if
the system is monitored).
It can even be used as a stand-alone CO Alarm whereby the
device operates without being part of a complete wireless
intrusion system.
The alarm automatically resets when CO is no longer detected.
In addition the CO sensor also detects low battery, wall tamper,
and alarm end-of-life. These trouble codes are transmitted to
the control panel.
The device is certified with EN50291- 1:2010 standard for CO
alarms.
It does not detect fire, smoke, or any other gas. It is intended for
residential indoor applications only, so it shall not be used in
industrial applications.
Data collected by several national institutes in Europe show that
this colorless, odorless gas claims thousands of lives, and tens
of thousands of people require medical attention yearly due to
CO poisoning. Most of these poisonings could be prevented if
carbon monoxide sensors were in use.
Standard Features
E
E
E
E
E
E
E
E
E
Longest-life sensor with 10-year sensor life
Reliable electrochemical technology
868AM Gen2 wireless communication reducing installation
costs
5-year battery life using 3 AA alkaline batteries
Sensor end-of-life indication
Wall tamper switch reduces liability if removed
Integrated functional CO test
Self-diagnostics for optimal performance
EN50291-1:2010+A1:2012 certified
TX-6310-03-1
Wireless CO Sensor 868AM Gen2
Specifications
Power
Required batteries
Sensor
Sensor life
Frequency
System compatibility :
Simon XT EMEA
ATS1235 (ATS Master and
ATS Advanced Receiver)
NX-848E, NX-848E-BO
and NX-10 Series Panels
Repeaters TX-9001-03-1
and NX-848E-RP
Supervisory interval
Audible alarm
Alarm response times
Dimensions
Storage temperature
Operating environment:
Temperature
Relative humidity
Ordering Information
Three AA batteries
Duracell MN 1500
Electrochemical
10 years
868AM Gen2
FW v5.3 or higher
FW v2.3 or higher
Radio module FW v4.43 or higher
All FW versions
20 minutes
Temporal 4
50 PPM = 60 to 90 min
100 PPM = 10 to 40 min
300 PPM = 3 min or less
119 x 70 x 47 mm
−20 to +60°C
0 to +40°C
10 to 95% noncondensing
As a company of innovation, UTC Fire & Security reserves the right to change product
specifications without notice. For the latest product specifications, visit UTC Fire & Security
online or contact your sales representative.
TX-6310-03-1-2017-02-14 23:37:30 Released :01-DEC-15
Part No.
Description
SC008CO
Carbon monoxide test spray for CO fire detectors
TX-6310-03-1
Wireless CO Sensor 868AM Gen2
Download PDF