bill-operated massage chair

BILL-OPERATED MASSAGE CHAIR
RT-M02A
USER MANUAL
D
D
eluxe
Massage Chair
INDEX
eluxe
Massage Chair
MAINTENANCE AND CARE
Maintenance method
Safety precautions--- -------------------------------------------------------1
Product function features--------------------------------------------------4
Name and function for each part----------------------------------------5
Preparation before use-----------------------------------------------------9
Operation steps------------------------------------------------------------10
Assembly method----------------------------------------------------------11
Chair
To clean plastic, pipe and armrest, please use cotton
fabric immerged in a neutral detergent, wring out
it to until dry and use it to clean , after all the above
parts are cleaned by the detergent, then use dry cloth
to clean the chair.
Do not use corrosive detergent or
cleansing powder, such as ethanol,
so as to avoid damage, colour
changes, dehiscence etc.
Controller
Notice
Please use dry cloth to clean the controller
Do not use a wet towel to clean
the controller so as to avoid
malfunction.
Troubleshooting------------------------------------------------------------12
Maintenance & care------------------------------------------------------13
Specifications---------------------------------------------------------------13
Notice
Back cushion and pillow
If there is dirt, please use cloth with neutral detergent, then use wet cloth to clean it, finally place
it in a ventilated area to dry naturally.
Storage method
Notice
Do not place the chair under the
sunshine directly for long time,
and not near a hot object, such as a
burner, to avoid color changes or
deterioration.
Put the chair in a dry place after cleaning.
Please cover it when not in use to avoid
dirt and dust.
Friendly inspection
Check for:
A burning smell
Damage to the power cord
Be sure to inspect
the product once Overheating of the power cord
use it for long
Other abnormal condition
time.
To prevent malfunction and
accidents, please pull out the
Please stop using power plug from the socket.
And contact the dealer where
you purchased the product or
our company. Please do not
disassemble it
yourself.
SPECIFICATIONS
Name
Bill accepted massage chair
Rated power
Model
RT-M02A
Safe design
Rated voltage
220-240V ~
Weight
Rated frequency
50/60Hz
Dimensions
Spread dimensions
Used
Indoors
13
D
eluxe
Massage Chair
TROUBLESHOOTING
D
eluxe
Massage Chair
SAFETY PRECAUTIONS
Before using the product, please read the “Safety precautions” carefully and use it properly.
Phenomenas
No display
after starting
Reasons
Solutions
If plug is inserted to the socket?
Plug into the socket.
If power switch behind the armis
cut?
Switch on the power.
If the fuse is burnt?
replace the fuse with same type.
If the back cushion touches on
the wall or other obstacles?
To avoid collision, please shut off
the power switch ,move the machine,
turn on the power switch again.
Please put relevant notice on visible area if necessary.
To clearly indicate the degrees of damage, the notice items are divided into the proper applications
of “warnings” and “cautions”.
Both are important and relevant to your safety concern, please comply with them.
WARNINGS Once Wrongly used, there is a possibility of death or to be seriously
injured.
Stop working
suddenly
Red light flashes at
the inserting place
If it exerts heavily? (For safety,
the massage mechanism will stop
working once bear the overburden)
If the cash box is full?
Let the body to leave the back cushion
temporarily, shut off the power switch ,
after turn on the switch again to press
the function button. All start again.
Once wrongly used, there is a chance the user can be seriously
CAUTIONS injured or physical damage.
Take out the money, and restart
the machine
Indication for prohibited actions and behaviours.
screen show Err1
Massage mechanism can not
return to original state.
screen show Err2
If the current is unstable?
Check the massage chair, try it again after
powered on . If it can not be recovered, the
massage chair should be sent for repair.
Denote mandatory actions and instructions for safe operation.
Try it again after shutting off the
power for 5 seconds.
For safety, do not repair the product by yourself.
Warnings
If the chair still does not work, cut the power off and remove the plug
from power socket, please contact with the distributor or our company
for maintenance and care.
Is it a malfunction?
During operation, should the chair make the following sounds or not feel right, it could be
the normal phenomena come from the structure. it will not influence the lifetime of the chair.
The clack sound when travelling up and down of the kneading mechanism.
The gears and motor sounds in operation.
The friction of the massage chair and other materials.
Noise of inflating and deflating air bags.
12
1
D
D
eluxe
Massage Chair
eluxe
Massage Chair
ASSEMBLY METHOD
WARNINGS!
Assembly/ folding method
Unfold the backrest in the direction
indicated by the arrow, At approximate
115 degrees , a locking sound is heard.
Mandatory
1.Persons with the following conditions should consult with their doctors before using the product:
Serious knob
Pregnancy Menstruation
High fever
Acute disease
Osteoporosis
Abnormal spinal problems
Heart problem
Serious blood circulation problem in the legs
People receiving medical treatment
Dottiness people
Release locking lever situated under the backrest and
behind the seat, then fold backrest forward
According to the arrow direction until it touches
the seat cushion.
Respiration apparatus problem
Uncomfortable feeling on the body
People with heart pacemakers or any other internal medical electrical apparatus
2.Should for any reason, the product does not work or an abnormality occurs please disconnect
power immediately and contact the distributor for an overhaul repair.
3.When descending the footrest or backrest, please be sure there are no children, animals or any
other obstructions under the footrest or backrest.
4.Use the rated power supply to avoid fire or electrical shock.
5.Should the power socket, plug or cord be damaged or loose, do not use.
6.Keep power cord unobstructed at all times, i.e. not twisted, knotted, over flexed or pulled and
do not place anything heavy on it.
7.Do not disassemble, repair or alter the product. Only technicians authorized by our company
should repair the product.
8.Should any abnormal phenomenon occur when using it, stop immediately and consult with the
doctor.
9.Cut the power off after use.
Locking lever
Backrest disassembly method
Seat cushions disassembly method
Zipper
Air bag tube
Air bag plug
Back cushion
Seat cushion
Backrest
Prohibited
1. Use the massage chair in damp places.
2. Put the massage chair close to a furnace or under the sunshine directly.
3. Use product on heated carpet or other heating devices.
4. Put the massage chair on an uneven surface during operation.
5. Use the controller with wet hands.
6. Drop the controller on floor or into water.
7. Pull the controller cord with excessive strength.
8. Put heavy things on the controller.
2
11
D
D
eluxe
Massage Chair
eluxe
Massage Chair
OPERATION STEPS
CAUTIONS!
Power on
Mandatory
Insert the plug into fine grounding three core wire power socket.
1.Remove the plug from power socket when out of use.
Switch the power on.(behind the backrest)
2.Should product receive maintenance, switch off and remove plug from power socket.
3.When disconnecting plug from socket, be sure to hold insulating bush instead of power cord.
Self-inspection
The bill acceptor massage chair box enters into the self-inspection state after it is powered.
If the self-inspection is normal, it will go into standby state. Now the parameters can be set.
If the self-inspection is abnormal, there are the following three display
Err0 internal communication is abnormal.
Err1 massage mechanism reposition is abnormal.
Err2 bill acceptor initialization is abnormal.
Abnormal phenomena : refer to the “troubleshooting”.
4.Do not use the product while smoking or near a fire place.
5.Please ensure to install grounding. In case malfunction, leakage may cause an electrical shock.
Additionally, consult with the dealer when installing the grounding.
6.Should a blackout or power failure occur, switch power off immediately and remove plug from
power socket.
7.Before use, uncover back cushion and make sure if the back and the inner cushion is in good order.
Should any part be damaged contact distributor immediately and do not use until repaired.
Bill-insertion
When the massage chair in the standby state, the bills can be inserted. When the quantity of the
inserted bills are less than the set starting quantity, the display screen will show the current bill
quantity, when the bill quantity is equal to the setting quantity, the machine starts to show the
corresponding running time. If no more bills are inserted within 5 seconds; the machine will begin
to work the running time is the present time; the display screen will show the remaining time.
When the inserted bill quantity is more than the setting quantity, every inserted bills will make
the time increase accordingly (the added value: starting time / starting bill quantity). For
example: the starting bill quantity is 3, the starting time is 2 (2 minutes i.e. 120 sec.), then it
means 3 bills can start it, every bill added will make the time increase: 120 sec./3=40 seconds.
Shutting off the machine
8.When descending the footrest or backrest, use moderate pressure and be sure there are no
obstructions or children near or under the footrest or backrest.
9. If the power cord is damaged , it can only be replaced by the manufacturer's maintenance
department or similar department.
Prohibited
1. Use the product when using other therapy devices.
When the remaining time on the display screen is 0 all the massage function will be shut off,
and shows “rESt”, This shows the massage chairs is in the state of reposition. When the massage
mechanism finished its reposition, the massage chair will return to standby state. The display
screen shows 0 .
2. Use the product for medical treatment purpose.
3. Let children to play on the massage chair.
4. Exert heavy force on the product, or prick or thrust sharply by the knife or other sharp articles.
5. Clean the product with petrol, detergent and spray pesticide on it to avoid any damage to the cover.
Take out the cash
6. Sit on backrest, armrest or footrest to avoid injury.
7. Move the chair off of any fragile wood or carpet in case of any damage to the floor or caster.
8. Immediately use the product after meal .
1.Unlock
9. Move it after the people sit or loading anything on the chair.
10. Have two people or more than two people on the product to avoid any injury or damage.
11. Put your head or hands under the product when operation.
2.Unfold cover to take out bill box
12.When operating, put knives, keys, or valuables in the pocket.
Total amount quick inspection
Put the magnetic pen on top of the total amount quick
RELEASE BUTTON
Total amount quick
inspection point
inspection point, the screen then displays the accumulative
amount, remove the magnetic pen away, the screen will
13. Let the children use the product alone or unconscious people to use it.
Do not disassemble, repair or alter the product except for technicians authorized by our company.
If you have any problem with the product, contact the distributor immediately.
LCD
return to normal state after 3 seconds.
10
3
D
D
eluxe
Massage Chair
eluxe
Massage Chair
PREPARATION BEFORE USE
FUNCTION AND FEATURES
1.Backrest ascending and descending structure can fit the body
curve automatically; the ergonomically design offers the best
massage. The armrest has a bill acceptor inside.
Installation place
2.Delicate massage features presents humanistic and an overall
enjoyable massage. The movable backrest massage mechanism between neck and waist
performs kneading, knocking, kneading & knocking and finger-pressing modes; meanwhile
adjustable speed and width help to relieve muscular fatigue and increase blood circulation.
Appropriate safety distance from surrounding
objects.
The horizontal distance between peak point and
bottom point of the backrest is over 50cm.
The horizontal distance between peak point and
bottom point of the footrest is over 15cm.
Floor protection
The base of the massage chair may cause
damage to the floor, we advise to place firm
cushioning (such as cushion) under the chair.
Carpet
Floor
Surroundings
KNEADING
KNOCKING
KNEADING & KNOCKING FINGER PRESSING
Do not put massage chair in damp place (such as bath room), to avoid the machine
getting wet and causing electrical shock.
3.Lower back allows wavelet air pressure massages. Air
Do not place the massage chair near a hot place (such as burner), to avoid fire or
damage to the cover.
bags at the thigh, buttock and legs areas will be inflated
and deflated with air alternatively to offer a repeated air
pressure massage and really helps relax nerves and improve
blood circulation for lower body.
Grounding
Buttocks and thigh air bags
The massage chair belongs to class I electric appliance with a three core power
source plug, please confirm the earth wire is installed so as to avoid electric
shock coming from an electricity leakage during operation.
4.One air bag in the upper and the lower position of the
left and right side respectively and the air bags in the middle
Moving method
of the two sides make the alternant and circulative massage.
Leg air bags
4
Adjust the backrest to the peak point, place the
controller and the plug on the seat cushion, be
sure all the wires are not close to the floor, use
your hands to press the top of the backrest until
it is lowered, make sure the back two plastic foot
cushions are far enough from the floor and has
enough space, then use the castor to move the
chair smoothly.
9
D
D
eluxe
Massage Chair
eluxe
Massage Chair
NAME AND FUNCTION FOR EACH PART
NAME AND FUNCTION FOR EACH PART
External structure
LCD screen
Pillow
Display area for the setting data, running time, remaining time
TIME
MONEY
SET
TOTAL
After the machine is initialized it shows “rESt”.
After it recovered to the standby state it shows “0”.
When the inserted bill's value didn't reach the setting it shows
“---X” (X:0-9).
When the inserted bill's value reach the set it shows time
“XX : XX” (X:0-9)
When error occurs, it shows the malfunction code
(ErrX) (X:0-3)
Under standby state, you can check or change the settings.
(Refer to “ remote controller” chapter for details)When
change the settings, “__XX” will flash, you can press“ ” “ ”
to change the data.
MODE
WIDTH
SPEED
TIME
MONEY
SET
TOTAL
MODE
When running, “TIME” appear.
When check or change total time, “TOTAL”and
“TIME” appear.
Display area for
When check or change total bill quantity, “TOTAL”
check/change settings
and “MONEY” appear.
When setting starting bill quantity, “SET”and
“MONEY” appear.
when setting starting time, “SET” and “TIME” appear.
when setting massage chair descending time, “SET”
and “TIME” appear.
Massage mode display area
Kneading
Knocking
Finger-pressing
Kneading & Knocking
Backrest
Armrest
Fuse
Seat cushion
Power socket
Back cushion
locking lever
Calf
Caster
Internal structure
Back massage mechanism
Width indicate for knocking and
finger-pressing massage modes.
WIDTH
Narrow
Middle
LCD
Wide
Thigh & Buttocks air bags
Bill acceptor
SPEED
Speed indicate for kneading, knocking and kneading &knocking
massage modes.
Middle
Slow
Fast
Lock
Calf air bags
Indicator for the parts of air bags.
Calf ascending & descending indicator
8
Backrest ascending & descending indicator
5
D
D
eluxe
Massage Chair
eluxe
Massage Chair
NAME AND FUNCTION FOR EACH PART
Bill acceptor
Main Menu
Accumulative time display(S,U)
After the bill acceptor initialized, the green light on the bill acceptor will flash, then it can
accept bills.
Sub Menu
Keep pressing “ ” key for 6 seconds
to erase the accumulative time(S)
Accumulative total amount display(S,U)
Keep pressing key “ ” for 6 seconds to
erase the accumulative amount(S)
Display starting bill quantity(S,U)
Set the starting bill quantity(S,U)
Display starting time, unit : minute(S,U)
Set the starting time(S,U)
Display massage chair recline down
time before work, unit : second(S,U)
Set the massage chair recline down
time before work(S,U)
Supervisor user(S)
Setting supervisor password(S)
User(U,S)
Setting user password(S,U)
Remote controller
For password setting
Previous menu / increase
Next menu / decrease
Confirm / enter sub-menu
S: supervisor U:user
Cancel / back to previous menu
Password Validated
Under standby mode, connecting remote controller to the machine to start setting, screen
shows “_ _ _ _ ” , please input user's password which consisted by four digital, then press
“
” to confirm password (includes supervisor's password and user's password, original
supervisor's password is ABCD, original user's password is AAAA ), After successfully
proofread password, the machine will select users automatically; while if the system will fail
to proofread the password for three times, the machine will be locked and all buttons will be
invalid for selection. But you may shut off power and restart the machine. Once the plug of the
remote controller pulled out, the massage chair will be the condition out of setting.
6
Accumulative time If the accumulative time is less than 100 hours, the display format is :
HH : MM(HH is hour, MM is minute). If the accumulative time is more than or equal to 100
hours and less than 10000 hours, the display is 3 to 4 digits integer of hours (minutes are
omitted).
Accumulative amount: If the amount is less than 10000pcs of bill's value, the display is 1
to 4 digits integer.
Starting bill' s quantity: setting range is 1-10; which corresponds to 1-10 bills.
Starting time: setting range is 1-15; corresponding time is 1-15 minutes.
Massage chair: recline down time before work : setting range is 0-30; corresponding
recline down time is 0-30 seconds.
Password setting : when screen shows “SUP_” (supervisor) or “USE_”(user), press “
”
button to enter password setting, screen shows “_ _ _ _” to remind consumer imputing
password which consists of 4 numbers, press “ ” to save it, screen shows “_ _ _ _”
again to remind consumer imputing password again, press “
” to confirm. System will
be back to standby mode only when passwords are the same for two times inputting.
Accumulative time erasure: Under the display of accumulative time state, keep pressing
“ ” for 3 seconds, the display screen will show “CLEA”, the time will be erased after 6
seconds. When the action is successful, the screen will show “0”.
Accumulative amount erasure Under the display of showing the accumulative amount
state, keep pressing “
” for 3 seconds, the display screen will show “CLEA”, the amount
will be erased after 6 seconds. When the action is successful, the screen will show “0”.
7
Download PDF