HDCVI Series DVR User’s Manual
Version 1.2.2
Table of Contents
1
FEATURES AND SPECIFICATIONS.................................................................. 1
1.1
Overview ................................................................................................................................................. 1
1.2
Features .................................................................................................................................................. 1
1.3
Specifications ......................................................................................................................................... 2
1.3.1
Econimic 720P Smart 1U Series .................................................................................................... 2
1.3.2
Econimic 720P(V2) Smart 1U Series ............................................................................................. 5
1.3.3
1080P(V2) Smart 1U Series ............................................................................................................ 6
1.3.4
Econimic 720P (S2) Smart 1U Series ...................................................................................... 8
1.3.5
General 720P (S2) Smart 1U Series.............................................................................................. 9
1.3.6
1080P (S2) Smart 1U Series ......................................................................................................... 10
1.3.7
Entry-level 720P (S2) Smart 1U series .................................................................................. 11
1.3.8
General 720P Mini 1U Series........................................................................................................ 12
1.3.9
General 720P(V2) Mini 1U Series ................................................................................................ 15
1.3.10
Econimic 720P Mini 1U Series ................................................................................................. 17
1.3.11
Econimic 720P(V2) Mini 1U Series ......................................................................................... 20
1.3.12
Advanced 720P Mini 1U Series ............................................................................................... 21
1.3.13
Advanced 720P (V2) Mini 1U Series....................................................................................... 24
1.3.14
General 1080P(V2) Mini 1U Series ......................................................................................... 25
1.3.15
Econimic 1080P(V2) Mini 1U Series ....................................................................................... 26
1.3.16
Advanced 1080P (V2) Mini 1U Series .................................................................................... 28
1.3.17
Econimic 720P (S2) Mini 1U Series ........................................................................................ 29
1.3.18
General 720P (S2) Mini 1U Series .......................................................................................... 30
1.3.19
Advanced 720P (S2) Mini 1U Series ....................................................................................... 31
1.3.20
1080P (S2) Mini 1U Series ..................................................................................................... 32
1.3.21
1080P (S2) Mini 1U Series ....................................................................................................... 33
1.3.22
720P (S2) Compact 1U Series ................................................................................................. 34
1.3.23
Entry-level 720P (S2) Compact 1U Series ............................................................................. 36
2
OVERVIEW AND CONTROLS ......................................................................... 38
2.1
2.1.1
Front Panel ........................................................................................................................................... 38
Econimic 720P / Econimic 720P(V2)/ 1080P(V2) Smart 1U/ Econimic 720P (S2) Smart
1U/ General 720P (S2) Smart 1U/1080P (S2) Smart 1U/Entry-level 720P (S2) Smart 1U Series .. 38
i
2.1.2
General 720P/Advanced 720P/ General 720P(V2) / Advanced 720P (V2) /General
1080P(V2) / Advanced 1080P (V2) Mini 1U Series ................................................................................. 38
2.1.3
Econimic 720P/ Econimic 720P(V2)/ Econimic 1080P(V2) Series .......................................... 39
2.1.4
Econimic 720P (S2) Mini 1U / General 720P (S2) Mini 1U / Advanced 720P (S2) Mini 1U /
1080P (S2) Mini 1U / 1080P (S2) Mini 1U /720P (S2) Compact 1U/Entry-level 720P (S2) Compact
1U Series ........................................................................................................................................................ 40
2.2
Rear Panel ............................................................................................................................................ 40
2.2.1
Econimic 720P Smart 1U Series .................................................................................................. 40
2.2.2
Econimic 720P(V2) Smart 1U Series ........................................................................................... 41
2.2.3
1080P(V2) Smart 1U Series .......................................................................................................... 42
2.2.4
Econimic 720P (S2) Smart 1U/Entry-level 720P (S2) Smart 1U series ...................... 43
2.2.5
General 720P (S2) Smart 1U Series............................................................................................ 45
2.2.6
1080P (S2) Smart 1U Series ......................................................................................................... 46
2.2.7
General 720P Mini 1U Series........................................................................................................ 47
2.2.8
General 720P(V2) Mini 1U Series ................................................................................................ 48
2.2.9
Econimic 720P Mini 1U Series...................................................................................................... 49
2.2.10
Econimic 720P(V2) Mini 1U Series ......................................................................................... 50
2.2.11
Advanced 720P Mini 1U Series ............................................................................................... 52
2.2.12
Advanced 720P (V2) Mini 1U Series....................................................................................... 53
2.2.13
General 1080P(V2) Mini 1U Series ......................................................................................... 55
2.2.14
Econimic 1080P(V2) Mini 1U Series ....................................................................................... 56
2.2.15
Advanced 1080P (V2) Mini 1U Series .................................................................................... 57
2.2.16
Econimic 720P (S2) Mini 1U Series ........................................................................................ 58
2.2.17
General 720P (S2) Mini 1U Series .......................................................................................... 60
2.2.18
Advanced 720P (S2) Mini 1U Series ....................................................................................... 62
2.2.19
1080P (S2) Mini 1U Series ..................................................................................................... 64
2.2.20
1080P (S2) Mini 1U Series ....................................................................................................... 65
2.2.21
720P (S2) Compact 1U/ Entry-level 720P (S2) Compact 1U Series .................................. 66
2.3
Connection Sample ............................................................................................................................. 68
2.3.1
Econimic 720P Smart 1U Series .................................................................................................. 68
2.3.2
General 720P Mini 1U Series ...................................................................................................... 69
2.3.3
Econimic 720P /Advanced 720P Mini 1U Series ....................................................................... 70
2.3.4
Econimic 720P(V2) /1080P(V2) Smart 1U Series...................................................................... 71
2.3.5
General 720P(V2) /General 1080P(V2) Mini 1U Series ............................................................ 72
2.3.6
Advanced 720P (V2) /Advanced 1080P (V2) Mini 1USeries ................................................... 73
2.3.7
Econimic 720P(V2) /Econimic 1080P(V2) Mini 1U Series ........................................................ 74
2.3.8
Econimic 720P (S2) Smart 1U/ Entry-level 720P (S2) Smart 1U Series ..................... 75
2.3.9
General 720P (S2) Smart 1U Series............................................................................................ 76
2.3.10
1080P (S2) Smart 1U Series .................................................................................................... 77
2.3.11
Econimic 720P (S2) Mini 1U Series ........................................................................................ 78
2.3.12
General 720P (S2) Mini 1U Series .......................................................................................... 79
2.3.13
Advanced 720P (S2) Mini 1U Series ....................................................................................... 80
ii
2.3.14
1080P (S2) Mini 1U Series ..................................................................................................... 81
2.3.15
1080P (S2) Mini 1U Series ....................................................................................................... 82
2.3.16
720P (S2) Compact 1U/ Entry-level 720P (S2) Compact 1U Series .................................. 83
2.4
Remote Control .................................................................................................................................... 84
2.5
Mouse Control ...................................................................................................................................... 86
3
INSTALLATION AND CONNECTIONS............................................................. 88
3.1
Check Unpacked DVR ........................................................................................................................ 88
3.2
About Front Panel and Rear Panel ................................................................................................... 88
3.3
HDD Installation ................................................................................................................................... 88
3.3.1
Econimic 720P /Econimic 720P(V2) /1080P(V2)/ Econimic 720P (S2) Smart 1U/
General 720P (S2) Smart 1U/1080P (S2) Smart 1U/ Entry-level 720P (S2) Smart 1U Series .... 88
3.3.2
General 720P /Econimic 720P /Advanced 720P /General 720P(V2) /Econimic 720P(V2)
/Advanced 720P (V2) /General 1080P(V2) /Econimic 1080P(V2) /Advanced 1080P (V2)/ Econimic
720P (S2) Mini 1U/ General 720P (S2) Mini 1U/ Advanced 720P (S2) Mini 1U/1080P (S2) Mini
1U/1080P (S2) Mini 1U/720P (S2) Compact 1U/ Entry-level 720P (S2) Compact 1U Series ........... 89
3.4
Connecting Power Supply .................................................................................................................. 90
3.5
Connecting Video Input and Output Devices .................................................................................. 90
3.5.1
Connecting Video Input .................................................................................................................. 90
3.5.2
Connecting Video Output ............................................................................................................... 91
3.6
Connecting Audio Input & Output, Bidirectional Audio .................................................................. 91
3.6.1
Audio Input ....................................................................................................................................... 91
3.6.2
Audio Output .................................................................................................................................... 91
3.7
Alarm Input and Output Connection ................................................................................................. 91
3.7.1
Alarm Input and Output Details ..................................................................................................... 92
3.7.2
Alarm Input Port .............................................................................................................................. 92
3.7.3
Alarm Output Port ........................................................................................................................... 93
iii
3.8
RS485.................................................................................................................................................... 93
3.9
Other Interfaces ................................................................................................................................... 94
4
OVERVIEW OF NAVIGATION AND CONTROLS ............................................ 95
4.1
Boot up and Shutdown ....................................................................................................................... 95
4.1.1
Boot up ............................................................................................................................................. 95
4.1.2
Shutdown ......................................................................................................................................... 95
4.1.3
Auto Resume after Power Failure ................................................................................................ 95
4.1.4
Replace Button Battery .................................................................................................................. 95
4.2
Startup Wizard ..................................................................................................................................... 95
4.3
Manual Record ..................................................................................................................................... 98
4.3.1
4.4
Live Viewing ..................................................................................................................................... 98
Right-Click Menu ............................................................................................................................... 101
4.4.1
Window Switch .............................................................................................................................. 101
4.4.2
PTZ Control.................................................................................................................................... 101
4.4.3
Color ............................................................................................................................................... 106
4.4.4
Search ............................................................................................................................................ 107
4.4.5
Manual Record .............................................................................................................................. 107
4.5
Navigation Bar .................................................................................................................................... 107
4.5.1
Main Menu ..................................................................................................................................... 108
4.5.2
Output Screen ............................................................................................................................... 108
4.5.3
Favorites......................................................................................................................................... 108
4.5.4
Tour ................................................................................................................................................. 108
4.5.5
PTZ ................................................................................................................................................. 108
4.5.6
Color ............................................................................................................................................... 108
4.5.7
Search ............................................................................................................................................ 108
4.5.8
Alarm Status .................................................................................................................................. 108
4.5.9
Channel Info .................................................................................................................................. 108
4.5.10
Remote Device ......................................................................................................................... 109
4.5.11
Network ...................................................................................................................................... 109
4.5.12
HDD Manager ........................................................................................................................... 109
4.5.13
USB Manager ........................................................................................................................... 109
iv
4.6
USB Device Auto Pop-up ................................................................................................................. 109
4.7
Main Menu .......................................................................................................................................... 110
4.8
Operation ............................................................................................................................................ 110
4.8.1
Search ............................................................................................................................................ 110
4.8.2
Backup ............................................................................................................................................ 117
4.8.3
Shut Down ..................................................................................................................................... 119
4.9
Information .......................................................................................................................................... 119
4.9.1
System Info .................................................................................................................................... 119
4.9.2
Event ............................................................................................................................................... 123
4.9.3
Network .......................................................................................................................................... 123
4.9.4
Log .................................................................................................................................................. 125
4.10
Setting ................................................................................................................................................. 127
4.10.1
Camera ...................................................................................................................................... 127
4.10.2
Network ...................................................................................................................................... 136
4.10.3
Event .......................................................................................................................................... 152
4.10.4
Storage ...................................................................................................................................... 165
4.10.5
System ....................................................................................................................................... 176
5
WEB OPERATION .......................................................................................... 192
5.1
Network Connection .......................................................................................................................... 192
5.2
Login .................................................................................................................................................... 192
5.3
LAN Mode ........................................................................................................................................... 193
5.4
Live ...................................................................................................................................................... 194
5.5
PTZ ...................................................................................................................................................... 195
5.6
Image................................................................................................................................................... 196
5.6.1
Image .............................................................................................................................................. 196
v
5.7
WAN Login.......................................................................................................................................... 197
5.8
Setup ................................................................................................................................................... 198
5.8.1
Camera ........................................................................................................................................... 198
5.8.2
Network .......................................................................................................................................... 206
5.8.3
Event ............................................................................................................................................... 221
5.8.4
Storage ........................................................................................................................................... 229
5.8.5
Setting............................................................................................................................................. 231
5.9
Information .......................................................................................................................................... 243
5.9.1
Version ........................................................................................................................................... 243
5.9.2
Log .................................................................................................................................................. 243
5.9.3
Online User .................................................................................................................................... 244
5.10
Playback.............................................................................................................................................. 244
5.10.1
Search Record .......................................................................................................................... 245
5.10.2
File List ...................................................................................................................................... 245
5.10.3
Playback .................................................................................................................................... 246
5.10.4
Download .................................................................................................................................. 246
5.10.5
Load more ................................................................................................................................. 247
5.11
Alarm ................................................................................................................................................... 249
5.12
Log out ................................................................................................................................................ 250
5.13
Un-install Web Control ...................................................................................................................... 251
6
PROFESSIONAL SURVEILLANCE SYSTEM ................................................ 252
7
FAQ................................................................................................................. 253
APPENDIX A HDD CAPACITY CALCULATION ................................................. 258
APPENDIX B COMPATIBLE BACKUP DEVICE LIST........................................ 259
vi
APPENDIX C COMPATIBLE CD/DVD DEVICE LIST ........................................... 265
APPENDIX D COMPATIBLE DISPLAYER LIST ................................................. 266
APPENDIX E COMPATIBLE SWITCHER LIST .................................................. 267
APPENDIX F
COMPATIBLE WIRELESS MOUSE LIST ..................................... 268
vii
Welcome
Thank you for purchasing our HDCVI DVR!
This user’s manual is designed to be a reference tool for the installation and operation of your
system.
Here you can find information about this series DVR features and functions, as well as a detailed
menu tree.
Before installation and operation please read the following safeguards and warnings carefully!
viii
Important Safeguards and Warnings
1.Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
2.Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3.Installation
Keep upwards. Handle with care.
Do not apply power to the DVR before completing installation.
Do not place objects on the DVR
4.Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5.Environment
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
This series product shall be transported, storage and used in the specified environments.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!
ix
1 FEATURES AND SPECIFICATIONS
1.1 Overview
This series product is an excellent digital monitor product designed for security field. It adopts embedded
Linux OS to maintain reliable operation. It is easy to use and can realize surveillance function after some
simple setups. It has various functions such as record, playback, monitor at the same time and can
guarantee audio video synchronization. This series product has advanced technology and strong
network data transmission function.
This series device adopts embedded design to achieve high security and reliability. It can work in the
local end, and at the same time, when connecting it to the professional surveillance software (PSS), it
can connect to security network to realize strong network and remote monitor function. It can realize HD
monitor without changing current cable layout
This series product can be widely used in various areas such as banking, telecommunication, electric
power, interrogation, transportation, intelligent resident zone, factory, warehouse, resources, and water
conservancy.
1.2 Features
This series product has the following features:
 Real-time monitor
It has analog output port, VGA port and HDMI port. You can use monitor or displayer to realize
surveillance function.
System supports VGA/HDMI output at the same time.
 Storage function
Special data format to guarantee data security and can avoid vicious data modification.
 Compression format
Support multiple-channel audio and video. An independent hardware decodes the audio and video
signal from each channel to maintain video and audio synchronization.
 Backup function
Support backup operation via USB port (such as flash disk, portable HDD, burner).
Client-end user can download the file to local HDD to backup via network.
 Record playback function
Support each channel real-time record independently, and at the same time it can support search,
forward play, network monitor, record search, download and etc.
Support various playback modes: slow play, fast play, backward play and frame by frame play.
Support time title overlay so that you can view event accurate occurred time
Support specified zone enlargement.

Network operation
1
Support network remote real-time monitor, remote record search and remote PTZ control.
 Alarm activation function
Several relay alarm outputs to realize alarm activation and on-site light control.
The alarm input port and output has the protection circuit to guarantee device safety.
 Communication port
RS485 port can realize alarm input and PTZ control.
RS232 port can connect to keyboard to realize central control, and can also connect to PC COM to
upgrade system and realize maintenance, and matrix control.
Standard Ethernet port can realize network access function.
 PTZ control
Support PTZ decoder via RS485.
Support various decode protocols to allow the PTZ to control the speed dome.
 Intelligent operation
Mouse operation function
In the menu, support copy and paste setup function
 UPnP
It is to establish the mapping relationship between the LAN and the WAN via the UPnP protocol.
Slight function differences may be found due to different series.
1.3 Specifications
1.3.1 Economic 720P Smart 1U Series
Parameter
System
Compression
Standard
Main
Processor
OS
System
Resources
Interface
Input
Devices
Input
Method
Shortcut
Function
Video
Compressio
n
Audio
Compressio
n
Video Input
4-Ch
High-performance industrial embedded micro controller
Embedded LINUX
Multiplex operations: Multiple-channel record, multiple-channel playback
and network operation simultaneously
User-friendly graphical user interface
USB mouse
Arabic number, English character, donation and extension Chinese
(optional)
Copy/paste operation, USB mouse right-key shortcut menu, double click
USB mouse to switch screen.
H.264
G711A, G711U, PCM
4-CH composite video input: (NTSC/PAL) BNC (1.0V P- P, 75Ω)
B
B
2
Video monitor
Video
Output
1-ch VGA output.
1-ch HDMI output.
Support VGA/HDMI video output at the same time.
Video
Standard
Support PAL/NTSC.
Record
Speed
Video
Partition
Monitor
Touring
1/4 windows(Optional)
Resolution
(PAL/NTSC
)
Playback:
All-ch: 720P 1280*720, 960H 960 ×576/960×480, D1
704×576/704×480, HD1 352×576/352×480, 2CIF 704×288/704×240,
CIF 352×288/ 352×240 , QCIF 176×144/176×120
Support dual streams: extra stream resolution CIF 352×288/ 352×240,
QCIF 176×144/176×120.
6-level image quality (Adjustable)
Image
Quality
Privacy
mask
Image
Information
Hard disk
Record and
playback
Support monitor tour functions such as motion detection, and schedule
auto control.
PAL/NTSC
Real-time monitor:
720P 1280*720
Support one privacy mask of user-defined size in full screen.
Support max 4 zones.
Channel information, time information and privacy mask zone.
TV Adjust
Adjust TV output zone suitable to anamorphic video.
Channel
Lock
Cover secret channel with black screen though system is encoding
normally.
Screen-lock function to prevent unauthorized user seeing secret video.
Channel name, recording status, screen lock status, video loss status
and motion detection status are shown on the bottom left of display
screen.
Hue, brightness, contrast, saturation and gain setup for each channel.
Channel
Information
Audio
Real-time Mode: PAL 1f/s to 25f/s per channel and NTSC 1f/s to 30f/s
per channel
Color
Configuratio
n
Audio Input
Audio
Output
Bidirectional
Audio
N/A
N/A
N/A
Hard Disk
1 built-in SATA port. Support 1 HDD.
One HDD
Space
Hard Disk
Occupation
4T
Recording
Mode
Audio:PCM 28.8MByte/h
Video:56-900MByte/h
Manual recording, motion detection recording, schedule recording and
alarm recording
Priority: Manual recording> alarm recording>motion detection
recording>schedule recording.
3
Storage
Mode
Recording
Length
Playback
Repeat
Way
Record
Search
Playback
Mode
Various File
Switch
Ways
Playback
Way
Multichannel
Playback
Window
Zoom
Partial
Enlargemen
t
Backup
function
Backup
Mode
Network
Function
Network
control
Motion
Detection and
Alarm
Motion
Detection
Video Loss
External
Alarm
Manual
Alarm
Control
Alarm Input
Alarm
Output
Alarm Relay
Support channel record quota setup
1 to 120 minutes single record duration (Default setup is 60 minutes)
When hard disk is full, system can overwrite previous video file.
Various search engines such as time, type and channel.
Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.
Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when a file is end system auto plays the
next file in the current channel
Support mark playback
There is 1/4-channel playback mode.
Switch between self-adaptive screen/full screen when playback
When in one-window full-screen playback mode, you can select any zone
to activate partial enlargement function.
HDD backup
Support peripheral USB backup device. (Flash disk, portable disk and
etc.)
Support peripheral USB burner.
Support network download and save
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as motion detection and video loss via
client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output
Zero-channel encoding
Bidirectional audio.
Zone setup: support 396((PAL 22×18, NTSC 22×15)) detection zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message prompt.
Alarm can activate screen message prompt.
N/A
N/A
N/A
N/A
N/A
4
Interface
System
Information
USB
Interface
Network
connection
RS485
RS232
Hard Disk
Information
Data
Stream
Statistics
Log
statistics
Version
On-line user
User
Management
User
Manageme
nt
Password
Authenticati
on
Upgrade
Login, Logout and Shutdown
General
Parameter
Power
Power
Consumptio
n
Working
Temperatur
e
Working
Humidity
Air
Pressure
Dimension
Weight
Installation
Mode
2 USB 2.0 port.
RJ45 10M/100M self-adaptable Ethernet port
N/A
N/A
Display HDD current status
Data stream statistics for each channel (in wave mode)
Backup to 1024 log files.
Support various search engines such as time and type.
Display version information: channel amount, system version and release
date.
Display current on-line user
Multi-lever user management; various management modes
Integrated management for local user, serial port user and network user.
Configurable user power.
Support user /group and its corresponding rights modification.
No limit to the user or group amount.
Password modification
Administrator can modify other user’s password.
Account lock strategy
Five times login failure in thirty minutes may result in account lock.
Web browser, client-end and update tool.
Password login protection to guarantee safety
User-friendly interface when login. Provide the following options: Logout
/shutdown/ restart.
Right authentication when shut down to make sure only those proper
people can turn off DVR
DC 12V
≤15W (With adapter, exclude HDD)
-10℃-+55℃
10%-90%
86kpa-106kpa
270(W) x205 (D) x41mm(H)
1.25KG(Exclude HDD)
Desktop installation
1.3.2 Economic 720P(V2) Smart 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
720P/D1/HD1/2CIF/CIF/QCIF
5
Parameters
Video
Frame
Rate
Video
Frame
Rate
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
8-Ch
PAL:1~25f/s;NTSC:1~30f/s
1536Kbps-4096Kbps,
For 720P: default setup is 2Mbps,max supports 4Mbps
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
N/A
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
N/A
N/A
N/A
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
Max 8-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
N/A
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
SMART 1U case,270mm(W)×205mm(D)×41mm(H)
1.25KG(No HDD)
Desk
1.3.3 1080P(V2) Smart 1U Series
Parameters
4-Ch
6
System
Video
Parameters
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Frame
Rate
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
4-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
1080P /720P/D1/HD1/2CIF/CIF/QCIF
PAL:1~25f/s;NTSC:1~30f/s
2048Kbps-6144Kbps,
For 1080P: default setup is 4Mbps,max supports 6Mbps
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
N/A
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
N/A
N/A
N/A
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
N/A
2 USB ports
DC12V
≤20W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
SMART 1U case,270mm(W)×205mm(D)×41mm(H)
1.25KG(No HDD)
7
Parameters
Installation
Mode
4-Ch
Desk
1.3.4 Econimic 720P (S2) Smart 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
720P/960H/D1/HD1/
2CIF/CIF/QCIF
HDCVI : 1 ~ 25f/s ( PAL ) ;
1~30f/s(NTSC)
CVBS : 1~25f/s ( PAL ) ;
1~30f/s(NTSC)
2048Kbps-4096Kbps,
For 720P: default setup is
2Mbps,max supports 4Mbps.
For 960H: default setup is
1Mbps,max supports 3Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
720P(1~15fps)/960H/D1/
HD1/2CIF/CIF/QCIF
HDCVI : 1 ~ 15f/s ( The 1st
channel supports 25/30f)
CVBS : 1~25f/s ( PAL ) ;
1~30f/s(NTSC)
1024Kbps-4096Kbps,
For 720P: default setup is
1Mbps,max supports 4Mbps.
For 960H: default setup is
1Mbps,max supports 3Mbps.
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
Max 2-channel IPC connections (8M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
Max 8-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
N/A
8
Others
Parameters
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
2 USB ports
DC12V
8-Ch
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
SMART 1U case,270mm(W)×205mm(D)×41mm(H)
1.25KG(No HDD)
Desk
1.3.5 General 720P (S2) Smart 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Video Port
Audio Port
Record
Alarm
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
1080P(1~15fps) /720P/960H/D1/HD1/2CIF/CIF/QCIF
HDCVI:1~25f/s(PAL);1~30f/s(NTSC)
CVBS:1~25f/s(PAL);1~30f/s(NTSC)
2048Kbps-4096Kbps,
For 1080P/720P: default setup is 2Mbps,max supports 4Mbps.
For 960H: default setup is 1Mbps,max supports 3Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
Max 2-channel IPC connections (8M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
Max 8-channel playback
HDD, burner, USB device, network backup
N/A
9
HDD
Communication
Port
Others
Parameters
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
N/A
8-Ch
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
N/A
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
SMART 1U case,270mm(W)×205mm(D)×41mm(H)
1.25KG(No HDD)
Desk
1.3.6 1080P (S2) Smart 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Video Port
Audio Port
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
4-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
1080P/720P/960H/D1/HD1/2CIF/CIF/QCIF
HDCVI:1~25f/s(PAL);1~30f/s(NTSC)
CVBS:1~25f/s(PAL);1~30f/s(NTSC)
2048Kbps-6144Kbps,
For 1080P: default setup is 4Mbps,max supports 6Mbps.
For 720P: default setup is 2Mbps,max supports 4Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
Max 2-channel IPC connections (16M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA port.
1-channel RCA port.
10
Record
Alarm
HDD
Communication
Port
Others
Parameters
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
N/A
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
SMART 1U case,270mm(W)×205mm(D)×41mm(H)
1.25KG(No HDD)
Desk
1.3.7 Entry-level 720P (S2) Smart 1U series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Video Port
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Video Output
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
720P(1~15fps) /960H/D1/HD1/2CIF/CIF/QCIF
HDCVI:1~12f/s
CVBS:1~20f/s(PAL);1~20f/s(NTSC)
1024Kbps-4096Kbps,
For 720P: default setup is 1Mbps,max supports 4Mbps.
For 1080P: default setup is 1Mbps,max supports 2Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
8-channel,BNC port
1-channel VGA output,
1-channel HDMI output (of the same video source),
11
Parameters
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
8-Ch
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
Max 8-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
N/A
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
SMART 1U case,270mm(W)×205mm(D)×41mm(H)
1.25KG(No HDD)
Desk
1.3.8 General 720P Mini 1U Series
Parameter
System
Compression
Standard
Main
Processor
OS
System
Resources
Interface
Input
Devices
Input
Method
Shortcut
Function
Video
Compressio
n
4-Ch
8-Ch
High-performance industrial embedded micro controller
Embedded LINUX
Multiplex operations: Multiple-channel record, multiple-channel playback
and network operation simultaneously
User-friendly graphical user interface
USB mouse
Arabic number, English character, donation and extension Chinese
(optional)
Copy/paste operation, USB mouse right-key shortcut menu, double click
USB mouse to switch screen.
H.264
12
Audio
Compressio
n
Video Input
G711A, G711U, PCM
4-CH composite video input:
8-CH composite video input:
(NTSC/PAL) BNC (1.0V P- P, 75Ω)
(NTSC/PAL) BNC (1.0V P- P, 75Ω)
1-ch VGA output.
1-ch HDMI output.
Support VGA/HDMI video output at the same time.
B
Video
Output
Video monitor
Video
Standard
Record
Speed
B
Support PAL/NTSC.
Real-time Mode: PAL 1f/s to 25f/s per channel and NTSC 1f/s to 30f/s
per channel
1/4 windows(Optional)
Resolution
(PAL/NTSC
)
Playback:
All-ch: 720P 1280*720, 960H 960 ×576/960×480, D1
704×576/704×480, HD1 352×576/352×480, 2CIF 704×288/704×240,
CIF 352×288/ 352×240 , QCIF 176×144/176×120
Support dual streams: extra stream resolution CIF 352×288/ 352×240,
QCIF 176×144/176×120.
6-level image quality (Adjustable)
1/4/8/9 windows
Support monitor tour functions such as motion detection, and schedule
auto control.
PAL/NTSC
Real-time monitor:
720P 1280*720
Support one privacy mask of user-defined size in full screen.
Support max 4 zones.
Channel information, time information and privacy mask zone.
TV Adjust
Adjust TV output zone suitable to anamorphic video.
Channel
Lock
Cover secret channel with black screen though system is encoding
normally.
Screen-lock function to prevent unauthorized user seeing secret video.
Channel name, recording status, screen lock status, video loss status
and motion detection status are shown on the bottom left of display
screen.
Hue, brightness, contrast, saturation and gain setup for each channel.
Channel
Information
Color
Configuratio
n
Hard disk
B
Video
Partition
Monitor
Touring
Image
Quality
Privacy
mask
Image
Information
Audio
B
Audio Input
1-ch 200-2000mv 10KΩ(RCA)
Audio
Output
Bidirectional
Audio
1-ch audio output 200-3000mv 5KΩ(RCA)
Hard Disk
1 built-in SATA port. Support 1 HDD.
One HDD
Space
Hard Disk
Occupation
4T
Reuse the audio input/output channel.
Audio:PCM 28.8MByte/h
Video:56-900MByte/h
13
Record and
playback
Recording
Mode
Manual recording, motion detection recording, schedule recording and
alarm recording
Priority: Manual recording> alarm recording>motion detection
recording>schedule recording.
Storage
Mode
Support channel record quota setup
Recording
Length
Playback
Repeat
Way
Record
Search
Playback
Mode
Various File
Switch
Ways
Playback
Way
Multichannel
Playback
Window
Zoom
Partial
Enlargemen
t
Backup
function
Backup
Mode
Network
Function
Network
control
1 to 120 minutes single record duration (Default setup is 60 minutes)
When hard disk is full, system can overwrite previous video file.
Various search engines such as time, type and channel.
Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.
Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when a file is end system auto plays the
next file in the current channel
Support mark playback
There is 1/4-channel playback mode.
Switch between self-adaptive screen/full screen when playback
When in one-window full-screen playback mode, you can select any zone
to activate partial enlargement function.
HDD backup
Support peripheral USB backup device. (Flash disk, portable disk and
etc.)
Support network download and save
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as motion detection and video loss via
client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output
Zero-channel encoding.
Motion
Detection and
Alarm
Motion
Detection
Video Loss
External
Alarm
Bidirectional audio.
Zone setup: support 396((PAL 22×18, NTSC 22×15)) detection zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message prompt.
Alarm can activate screen message prompt.
N/A
14
Interface
Manual
Alarm
Control
Alarm Input
Alarm
Output
Alarm Relay
USB
Interface
Network
connection
RS485
System
Information
RS232
Hard Disk
Information
Data
Stream
Statistics
Log
statistics
Version
On-line user
User
Management
User
Manageme
nt
Password
Authenticati
on
Upgrade
Login, Logout and Shutdown
General
Parameter
Power
Power
Consumptio
n
Working
Temperatur
e
Working
Humidity
Air
Pressure
Dimension
Weight
Installation
Mode
N/A
N/A
N/A
N/A
2 USB 2.0 port.
RJ45 10M/100M self-adaptable Ethernet port
PTZ control port
Support various PTZ control protocols.
N/A
Display HDD current status
Data stream statistics for each channel (in wave mode)
Backup to 1024 log files.
Support various search engines such as time and type.
Display version information: channel amount, system version and release
date.
Display current on-line user
Multi-lever user management; various management modes
Integrated management for local user, serial port user and network user.
Configurable user power.
Support user /group and its corresponding rights modification.
No limit to the user or group amount.
Password modification
Administrator can modify other user’s password.
Account lock strategy
Five times login failure in thirty minutes may result in account lock.
Web browser, client-end and update tool.
Password login protection to guarantee safety
User-friendly interface when login. Provide the following options: Logout
/shutdown/ restart.
Right authentication when shut down to make sure only those proper
people can turn off DVR
DC 12V
≤15W (With adapter, exclude HDD)
-10℃-+55℃
10%-90%
86kpa-106kpa
325(W) x245 (D) x45mm(H)
1.25KG(Exclude HDD)
Desktop installation
1.3.9 General 720P(V2) Mini 1U Series
15
System
Video
Parameters
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Frame
Rate
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
16-Ch
720P/D1/HD1/2CIF/CIF/QCIF
PAL:1~25f/s;NTSC:1~30f/s
1536Kbps-4096Kbps,
For 720P: default setup is 2Mbps,max supports 4Mbps
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel , BNC
port
N/A
8-channel , BNC
port
16-channel , BNC
port
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA
1-channel RCA
Support (reuse the audio port)
Schedule record/manual record/MD record/Alarm record
Max
4-channel Max
8-channel Max
16-channel
playback
playback
playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤30W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
16
Parameters
Installation
Mode
4-Ch
Desk
8-Ch
16-Ch
1.3.10 Econimic 720P Mini 1U Series
Parameter
System
Compression
Standard
Main
Processor
OS
System
Resources
Interface
Input
Devices
Input
Method
Shortcut
Function
Video
Compressio
n
Audio
Compressio
n
Video Input
4-Ch
8-Ch
High-performance industrial embedded micro controller
Embedded LINUX
Multiplex operations: Multiple-channel record, multiple-channel playback
and network operation simultaneously
User-friendly graphical user interface
USB mouse
Arabic number, English character, donation and extension Chinese
(optional)
Copy/paste operation, USB mouse right-key shortcut menu, double click
USB mouse to switch screen.
H.264
N/A
4-CH composite video input:
8-CH composite video input:
(NTSC/PAL) BNC (1.0V P- P, 75Ω)
(NTSC/PAL) BNC (1.0V P- P, 75Ω)
1-ch VGA output.
1-ch HDMI output.
Support VGA/HDMI video output at the same time.
B
Video
Output
Video monitor
Video
Standard
Record
Speed
B
B
B
Support PAL/NTSC.
Real-time Mode: PAL 1f/s to 25f/s per channel and NTSC 1f/s to 30f/s
per channel
Video
Partition
Monitor
Touring
1/4 windows(Optional)
Resolution
(PAL/NTSC
)
Playback:
All-ch: 720P 1280*720, 960H 960 ×576/960×480, D1
704×576/704×480, HD1 352×576/352×480, 2CIF 704×288/704×240,
CIF 352×288/ 352×240 , QCIF 176×144/176×120
Support dual streams: extra stream resolution CIF 352×288/ 352×240,
QCIF 176×144/176×120.
6-level image quality (Adjustable)
Image
Quality
Privacy
mask
Image
Information
1/4/8/9 windows
Support monitor tour functions such as motion detection, and schedule
auto control.
PAL/NTSC
Real-time monitor:
720P 1280*720
Support one privacy mask of user-defined size in full screen.
Support max 4 zones.
Channel information, time information and privacy mask zone.
17
TV Adjust
Adjust TV output zone suitable to anamorphic video.
Channel
Lock
Cover secret channel with black screen though system is encoding
normally.
Screen-lock function to prevent unauthorized user seeing secret video.
Channel name, recording status, screen lock status, video loss status
and motion detection status are shown on the bottom left of display
screen.
Hue, brightness, contrast, saturation and gain setup for each channel.
Channel
Information
Color
Configuratio
n
Audio
Hard disk
Record and
playback
Audio Input
Audio
Output
Bidirectional
Audio
N/A
Hard Disk
1 built-in SATA port. Support 1 HDD.
One HDD
Space
Hard Disk
Occupation
4T
N/A
Audio:PCM 28.8MByte/h
Video:56-900MByte/h
Recording
Mode
Manual recording, motion detection recording, schedule recording and
alarm recording
Priority: Manual recording> alarm recording>motion detection
recording>schedule recording.
Storage
Mode
Support channel record quota setup
Recording
Length
Playback
Repeat
Way
Record
Search
Playback
Mode
Various File
Switch
Ways
Playback
Way
Multichannel
Playback
Window
Zoom
Partial
Enlargemen
t
Backup
function
N/A
Backup
Mode
1 to 120 minutes single record duration (Default setup is 60 minutes)
When hard disk is full, system can overwrite previous video file.
Various search engines such as time, type and channel.
Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.
Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when a file is end system auto plays the
next file in the current channel
Support mark playback
There is 1/4-channel playback mode.
Switch between self-adaptive screen/full screen when playback
When in one-window full-screen playback mode, you can select any zone
to activate partial enlargement function.
HDD backup
Support peripheral USB backup device. (Flash disk, portable disk and
etc.)
18
Network
Function
Network
control
Motion
Detection and
Alarm
Interface
System
Information
Motion
Detection
Video Loss
External
Alarm
Manual
Alarm
Control
Alarm Input
Alarm
Output
Alarm Relay
USB
Interface
Network
connection
RS485
RS232
Hard Disk
Information
Data
Stream
Statistics
Log
statistics
Version
On-line user
User
Management
User
Manageme
nt
Password
Authenticati
on
Upgrade
Login, Logout and Shutdown
Support network download and save
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as motion detection and video loss via
client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output
Zero-channel encoding.
Bidirectional audio.
Zone setup: support 396((PAL 22×18, NTSC 22×15)) detection zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message prompt.
Alarm can activate screen message prompt.
N/A
N/A
N/A
N/A
N/A
2 USB 2.0 ports.
One RJ45 10M/100M self-adaptable Ethernet port
N/A
N/A
Display HDD current status
Data stream statistics for each channel (in wave mode)
Backup to 1024 log files.
Support various search engines such as time and type.
Display version information: channel amount, system version and release
date.
Display current on-line user
Multi-lever user management; various management modes
Integrated management for local user, serial port user and network user.
Configurable user power.
Support user /group and its corresponding rights modification.
No limit to the user or group amount.
Password modification
Administrator can modify other user’s password.
Account lock strategy
Five times login failure in thirty minutes may result in account lock.
Web browser, client-end and update tool.
Password login protection to guarantee safety
User-friendly interface when login. Provide the following options: Logout
/shutdown/ restart.
19
General
Parameter
Power
Power
Consumptio
n
Working
Temperatur
e
Working
Humidity
Air
Pressure
Dimension
Weight
Installation
Mode
Right authentication when shut down to make sure only those proper
people can turn off DVR
DC 12V
≤15W (With adapter, exclude HDD)
-10℃-+55℃
10%-90%
86kpa-106kpa
325(W) x245 (D) x45mm(H)
1.25KG(Exclude HDD)
Desktop installation
1.3.11 Econimic 720P(V2) Mini 1U Series
System
Video
Parameters
Audio
Parameters
Video Port
Audio Port
Record
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Frame
Rate
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
16-Ch
720P/D1/HD1/2CIF/CIF/QCIF
PAL:1~25f/s;NTSC:1~30f/s
1536Kbps-4096Kbps,
For 720P: default setup is 2Mbps,max supports 4Mbps
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel , BNC
port
N/A
8-channel , BNC
port
16-channel , BNC
port
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
N/A
N/A
N/A
Schedule record/manual record/MD record/Alarm record
Max
4-channel Max
8-channel Max
16-channel
playback
playback
playback
HDD, burner, USB device, network backup
20
Alarm
HDD
Communication
Port
Others
Parameters
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
N/A
N/A
8-Ch
16-Ch
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤30W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.12 Advanced 720P Mini 1U Series
Parameter
System
Compression
Standard
Main
Processor
OS
System
Resources
Interface
Input
Devices
Input
Method
Shortcut
Function
Video
Compressio
n
Audio
Compressio
n
Video Input
4-Ch
8-Ch
High-performance industrial embedded micro controller
Embedded LINUX
Multiplex operations: Multiple-channel record, multiple-channel playback
and network operation simultaneously
User-friendly graphical user interface
USB mouse
Arabic number, English character, donation and extension Chinese
(optional)
Copy/paste operation, USB mouse right-key shortcut menu, double click
USB mouse to switch screen.
H.264
G711A, G711U, PCM
4-CH composite video input:
8-CH composite video input:
(NTSC/PAL) BNC (1.0V P- P, 75Ω)
(NTSC/PAL) BNC (1.0V P- P, 75Ω)
1-ch VGA output.
1-ch HDMI output.
Support VGA/HDMI video output at the same time.
B
Video
Output
Video monitor
Video
Standard
Record
Speed
B
B
B
Support PAL/NTSC.
Real-time Mode: PAL 1f/s to 25f/s per channel and NTSC 1f/s to 30f/s
per channel
21
Video
Partition
Monitor
Touring
1/4 windows(Optional)
Resolution
(PAL/NTSC
)
Playback:
All-ch: 720P 1280*720, 960H 960 ×576/960×480, D1
704×576/704×480, HD1 352×576/352×480, 2CIF 704×288/704×240,
CIF 352×288/ 352×240 , QCIF 176×144/176×120
Support dual streams: extra stream resolution CIF 352×288/ 352×240,
QCIF 176×144/176×120.
6-level image quality (Adjustable)
Image
Quality
Privacy
mask
Image
Information
Record and
playback
Support one privacy mask of user-defined size in full screen.
Support max 4 zones.
Channel information, time information and privacy mask zone.
Adjust TV output zone suitable to anamorphic video.
Channel
Lock
Cover secret channel with black screen though system is encoding
normally.
Screen-lock function to prevent unauthorized user seeing secret video.
Channel name, recording status, screen lock status, video loss status
and motion detection status are shown on the bottom left of display
screen.
Hue, brightness, contrast, saturation and gain setup for each channel.
Color
Configuratio
n
Hard disk
Support monitor tour functions such as motion detection, and schedule
auto control.
PAL/NTSC
Real-time monitor:
720P 1280*720
TV Adjust
Channel
Information
Audio
1/4/8/9 windows
Audio Input
1-ch 200-2000mv 10KΩ(RCA)
Audio
Output
Bidirectional
Audio
1-ch audio output 200-3000mv 5KΩ(RCA)
Hard Disk
1 built-in SATA port. Support 1 HDD.
One HDD
Space
Hard Disk
Occupation
4T
Recording
Mode
Storage
Mode
Recording
Length
Playback
Repeat
Way
Record
Search
Reuse the audio input/output channel.
Audio:PCM 28.8MByte/h
Video:56-900MByte/h
Manual recording, motion detection recording, schedule recording and
alarm recording
Priority: Manual recording> alarm recording>motion detection
recording>schedule recording.
Support channel record quota setup
1 to 120 minutes single record duration (Default setup is 60 minutes)
When hard disk is full, system can overwrite previous video file.
Various search engines such as time, type and channel.
22
Playback
Mode
Various File
Switch
Ways
Playback
Way
Multichannel
Playback
Window
Zoom
Partial
Enlargemen
t
Backup
function
Network
Function
Network
control
Interface
Motion
Detection
Video Loss
External
Alarm
Manual
Alarm
Control
Alarm Input
Alarm
Output
Alarm Relay
USB
Interface
Network
connection
RS485
System
Information
Support mark playback
There is 1/4-channel playback mode.
Switch between self-adaptive screen/full screen when playback
When in one-window full-screen playback mode, you can select any zone
to activate partial enlargement function.
HDD backup
Backup
Mode
Motion
Detection and
Alarm
Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.
Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when a file is end system auto plays the
next file in the current channel
RS232
Hard Disk
Information
Support peripheral USB backup device. (Flash disk, portable disk and
etc.)
Support network download and save
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as motion detection and video loss via
client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output
Bidirectional audio.
Zone setup: support 396((PAL 22×18, NTSC 22×15)) detection zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message prompt.
Alarm can activate screen message prompt.
Support record activation function or activate external alarm or screen
message in specified period.
Enable or disable alarm input channel
Support analog alarm signal to specific alarm output channel.
4-ch alarm input(NO/NC)
3-channel relay output.
8-ch alarm input(NO/NC )
30V DC 2A,125VAC 1A(activation alarm )
2 USB 2.0 ports.
One RJ45 10M/100M self-adaptable Ethernet port
PTZ control port
Support various PTZ control protocols.
N/A
Display HDD current status
23
Data
Stream
Statistics
Log
statistics
Version
On-line user
User
Management
User
Manageme
nt
Password
Authenticati
on
Upgrade
Login, Logout and Shutdown
General
Parameter
Power
Power
Consumptio
n
Working
Temperatur
e
Working
Humidity
Air
Pressure
Dimension
Weight
Installation
Mode
Data stream statistics for each channel (in wave mode)
Backup to 1024 log files.
Support various search engines such as time and type.
Display version information: channel amount, system version and release
date.
Display current on-line user
Multi-lever user management; various management modes
Integrated management for local user, serial port user and network user.
Configurable user power.
Support user /group and its corresponding rights modification.
No limit to the user or group amount.
Password modification
Administrator can modify other user’s password.
Account lock strategy
Five times login failure in thirty minutes may result in account lock.
Web browser, client-end and update tool.
Password login protection to guarantee safety
User-friendly interface when login. Provide the following options: Logout
/shutdown/ restart.
Right authentication when shut down to make sure only those proper
people can turn off DVR
DC 12V
≤15W (With adapter, exclude HDD)
-10℃-+55℃
10%-90%
86kpa-106kpa
325(W) x245 (D) x45mm(H)
1.25KG(Exclude HDD)
Desktop installation
1.3.13 Advanced 720P (V2) Mini 1U Series
System
Video
Parameters
Audio
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Frame
Rate
Bit Stream Type
Dual-Stream
Encode
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
16-Ch
720P/D1/HD1/2CIF/CIF/QCIF
PAL:1~25f/s;NTSC:1~30f/s
1536Kbps-4096Kbps,
For 720P: default setup is 2Mbps,max supports 4Mbps
Video stream/composite stream
Support
G.711A/G.711U/PCM
24
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Parameters
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
8-Ch
16-Ch
8-channel , BNC
port
16-channel , BNC
port
8KHz,16Bit
64Kbps
4-channel , BNC
port
N/A
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
4-channel RCA
1-channel RCA
Support (reuse the audio port)
Schedule record/manual record/MD record/Alarm record
Max
4-channel Max
8-channel Max
16-channel
playback
playback
playback
HDD, burner, USB device, network backup
4-channel
alarm 8-channel
alarm 16-channel
alarm
input
input
input
3-channel alarm output
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤30W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.14 General 1080P(V2) Mini 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
1080P /720P/D1/HD1/2CIF/CIF/QCIF
25
Parameters
Video
Frame
Rate
Video
Frame
Rate
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
8-Ch
PAL:1~25f/s;NTSC:1~30f/s
2048Kbps-6144Kbps,
For 1080P: default setup is 4Mbps,max supports 6Mbps
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
N/A
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA
1-channel RCA
Support (reuse the audio port)
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
Max 8-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
N/A
2 USB ports
DC12V
≤30W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.15 Econimic 1080P(V2) Mini 1U Series
Parameters
4-Ch
8-Ch
26
System
Video
Parameters
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Frame
Rate
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
1080P/720P/D1/HD1/2CIF/CIF/QCIF
PAL:1~25f/s;NTSC:1~30f/s
2048Kbps-6144Kbps,
For 1080P: default setup is 4Mbps,max supports 6Mbps
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
N/A
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
N/A
N/A
N/A
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
Max 8-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤30W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
27
Parameters
Installation
Mode
4-Ch
Desk
8-Ch
1.3.16 Advanced 1080P (V2) Mini 1U Series
System
Video
Parameters
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Frame
Rate
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
1080P/720P/D1/HD1/2CIF/CIF/QCIF
PAL:1~25f/s;NTSC:1~30f/s
2048Kbps-6144Kbps,
For 1080P: default setup is 4Mbps,max supports 6Mbps
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
N/A
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
4-channel RCA
1-channel RCA
Support (reuse the audio port)
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
Max 8-channel playback
HDD, burner, USB device, network backup
4-channel alarm input
16-channel alarm input
3-channel alarm output
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤30W(With power adapter, no HDD)
28
Parameters
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
8-Ch
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.17 Econimic 720P (S2) Mini 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Video Port
Audio Port
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
16-Ch
720P/960H/D1/
720P(1~15fps)/960H/
HD1/2CIF/CIF/QCIF D1/HD1/2CIF/CIF/QCIF
HDCVI : 1 ~ 25f/s HDCVI:1~ 15f/s(The 1st channel supports
( PAL ) ; 1~30f/s 25/30f)
(NTSC)
CVBS:1~25f/s(PAL);1~30f/s(NTSC)
CVBS : 1~25f/s
( PAL ) ; 1~30f/s
(NTSC)
2048Kbps1024Kbps-4096Kbps,
4096Kbps,
For 720P: default setup is 1Mbps , max
For 720P: default supports 4Mbps.
setup is 2Mbps , For 960H: default setup is 1Mbps , max
max
supports supports 3Mbps.
4Mbps.
For 960H: default
setup is 1Mbps ,
max
supports
3Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
16-channel,
BNC port
Max 2-channel IPC connections (8M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
4-channel RCA port.
1-channel RCA port.
29
Record
Alarm
HDD
Communication
Port
Others
Parameters
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
8-Ch
Reuse the audio input/output port.
16-Ch
Schedule record/manual record/MD record/Alarm record
Max
4-channel Max
8-channel Max
16-channel
playback
playback
playback
HDD, burner, USB device, network backup
4-channel input
8-channel input
16-channel input
3-channel output
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.18 General 720P (S2) Mini 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Video Port
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
16-Ch
1080P(1~15fps)/720P/960H/D1/HD1/2CIF/CIF/QCIF
HDCVI:1~25f/s(PAL);1~30f/s(NTSC)
CVBS:1~25f/s(PAL);1~30f/s(NTSC)
2048Kbps-4096Kbps,
For 1080P/720P: default setup is 2Mbps,max supports 4Mbps.
For 960H: default setup is 1Mbps,max supports 3Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
16-channel,
BNC port
Max 2-channel IPC connections (8M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
30
Parameters
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
8-Ch
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
16-Ch
Schedule record/manual record/MD record/Alarm record
Max
4-channel Max
8-channel Max
16-channel
playback
playback
playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.19 Advanced 720P (S2) Mini 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
16-Ch
1080P(1~15fps)/720P/960H/D1/HD1/2CIF/CIF/QCIF
HDCVI:1~25f/s(PAL);1~30f/s(NTSC)
CVBS:1~25f/s(PAL);1~30f/s(NTSC)
2048Kbps-4096Kbps,
For 1080P/720P: default setup is 2Mbps,max supports 4Mbps.
For 960H: default setup is 1Mbps,max supports 3Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
31
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Parameters
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
4-channel,BNC port
8-Ch
8-channel,BNC port
16-Ch
16-channel,
BNC port
Max 2-channel IPC connections (8M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
4-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
Max
4-channel Max
8-channel Max
16-channel
playback
playback
playback
HDD, burner, USB device, network backup
4-channel input
8-channel input
16-channel input
3-channel output
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.20 1080P (S2) Mini 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Frame
Bit Stream Type
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
1080P/720P/960H/D1/HD1/2CIF/CIF/QCIF
HDCVI:1~25f/s(PAL);1~30f/s(NTSC)
CVBS:1~25f/s(PAL);1~30f/s(NTSC)
2048Kbps-6144Kbps,
For 1080P: default setup is 4Mbps,max supports 6Mbps.
For 720P: default setup is 2Mbps,max supports 4Mbps.
Video stream/composite stream
32
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Parameters
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
Support
G.711A/G.711U/PCM
8-Ch
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
Max 2-channel IPC connections (16M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
Max 8-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.21 1080P (S2) Mini 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
4-Ch
8-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
1080P/720P/960H/D1/HD1/2CIF/CIF/QCIF
HDCVI:1~25f/s(PAL);1~30f/s(NTSC)
33
Parameters
Rate
Video
Frame
Rate
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Others
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
8-Ch
CVBS:1~25f/s(PAL);1~30f/s(NTSC)
2048Kbps-6144Kbps,
For 1080P: default setup is 4Mbps,max supports 6Mbps.
For 720P: default setup is 2Mbps,max supports 4Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
Max 2-channel IPC connection (16M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
4-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
Max 4-channel playback
Max 8-channel playback
HDD, burner, USB device, network backup
8-channel input
16-channel input
3-channel output
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Mini 1U case,325mm(W)×245mm(D)×45mm(H)
1.25KG(No HDD)
Desk
1.3.22 720P (S2) Compact 1U Series
System
Parameters
Main Processor
4-Ch
8-Ch
Industrial embedded micro controller
16-Ch
34
Video
Parameters
Parameters
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Video Port
Audio Port
Record
Alarm
HDD
Communication
Port
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Network Video
Input
Video Output
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
Space
Network
Communication
USB
4-Ch
Embedded LINUX
H.264
8-Ch
16-Ch
720P/960H/D1/HD1/
720P(1-15f/s)/960H/D1/HD1/
2CIF/CIF/QCIF
2CIF/CIF/QCIF
HDCVI : 1 ~ 25f/s HDCVI:1~15f/s (The 1st channel supports
( PAL ) ; 1~30f/s 25/30fps/)
CVBS:1~25f/s(PAL);1~30f/s(NTSC)
(NTSC)
CVBS : 1~25f/s
( PAL ) ; 1~30f/s
(NTSC)
2048Kbps1024Kbps-4096Kbps,
4096Kbps,
For 720P: default setup is 1Mbps , max
For 720P: default supports 4Mbps.
setup is 2Mbps,max For 960H: default setup is 1Mbps , max
supports 4Mbps.
supports 3Mbps.
For 960H: default
setup is 1Mbps,max
supports 3Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
4-channel,BNC port
8-channel,BNC port
16-channel,
BNC port
Max 2-channel IPC connections (8M)
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
Max
4-channel Max
8-channel Max
16-channel
playback
playback
playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
35
Others
Parameters
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
4-Ch
DC12V
8-Ch
16-Ch
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Compact 1U case, 260mm(W)×220mm(D)×44mm(H)
1.25KG(No HDD)
Desk
1.3.23 Entry-level 720P (S2) Compact 1U Series
System
Video
Parameters
Parameters
Main Processor
OS
Video Encode
Standard
Encode
Resolution
Video
Frame
Rate
Video
Rate
Audio
Parameters
Video Port
Frame
Bit Stream Type
Dual-Stream
Encode
Standard
Audio Sampling
Rate
Audio Bit Rate
Analog
Video
Input
Video Output
Audio Port
Record
Alarm
HDD
Loop Output
Matrix Output
Audio Input
Audio Output
Bidirectional
Talk Input
Record Mode
Record
Playback
Backup Mode
Alarm Input
Alarm Output
HDD Port
One
HDD
8-Ch
16-Ch
Industrial embedded micro controller
Embedded LINUX
H.264
720P(1-15f/s)/960H/D1/HD1/2CIF/CIF/QCIF
HDCVI:1~12f/s
CVBS:1~20f/s(PAL);1~20f/s(NTSC)
1024Kbps-4096Kbps,
For 720P: default setup is 1Mbps,max supports 4Mbps.
For 960H: default setup is 1Mbps,max supports 3Mbps.
Video stream/composite stream
Support
G.711A/G.711U/PCM
8KHz,16Bit
64Kbps
8-channel,BNC port
16-channel,BNC port
1-channel VGA output,
1-channel HDMI output (of the same video source),
HDMI/ VGA video output at the same time.
N/A
N/A
1-channel RCA port.
1-channel RCA port.
Reuse the audio input/output port.
Schedule record/manual record/MD record/Alarm record
960H: Max 4-channel playback
720P: Max 1-channel playback
HDD, burner, USB device, network backup
N/A
N/A
1 SATA port,does not support eSATA port
4T
36
Communication
Port
Others
Parameters
Space
Network
Communication
USB
Power
Power
Consumption
Working
Temperature
Working
Humidity
Dimensions
Weight
Installation
Mode
8-Ch
16-Ch
1 RJ45 port, 100Mbps Ethernet port
RS485 port
2 USB ports
DC12V
≤15W(With power adapter, no HDD)
-10℃-+55℃
10%~90%
Compact 1U case, 260mm(W)×220mm(D)×44mm(H)
1.25KG(No HDD)
Desk
37
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series DVR for
the first time, please refer to this part first.
2.1 Front Panel
2.1.1 Econimic 720P / Econimic 720P(V2)/ 1080P(V2) Smart 1U/ Econimic 720P
(S2) Smart 1U/ General 720P (S2) Smart 1U/1080P (S2) Smart 1U/Entry-level
720P (S2) Smart 1U Series
The front panel is shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
SN
Name
Function
1
HDD status indictor light
The red light becomes on when HDD is abnormal.
2
Power indicator light
The red light becomes on when the power
connection is OK.
3
Network status indicator
light
The red light becomes on when the network
connection is abnormal.
2.1.2 General 720P/Advanced 720P/ General 720P(V2) / Advanced 720P (V2) /General
1080P(V2) / Advanced 1080P (V2) Mini 1U Series
The front panel is shown as below. See Figure 2-2.
38
Figure 2-2
Please refer to the following sheet for front panel button information.
SN
Icon
Name
1
2
3
3
5
Alarm
NET
HDD
IR
Function
To connect USB storage device, USB mouse and
USB port
etc.
When an alarm occurs, the light becomes red to
Alarm indicator light alert you.
Network abnormal
Network error occurs or there is no network
indicator light
connection, the light becomes red to alert you.
HDD error occurs or HDD capacity is below
specified threshold value, the light becomes red
to alert you.
HDD abnormal
indicator light
IR Receiver
6
ESC
ESC
FN
Assist
Enter
ENTER
7
8
9
Power button
、
、
Up
Down
Left
Right
It is to receive the signal from the remote
control.
Go to previous menu, or cancel current
operation.
When playback, click it to restore real-time
monitor mode.
One-window monitor mode, click this button to
display assistant function: PTZ control and image
color.
Backspace function: in numeral control or text
control, press it for 1.5seconds to delete the
previous character before the cursor.
In motion detection setup, working with Fn and
direction keys to realize setup.
In text mode, click it to switch between numeral,
English character(small/capitalized) and etc.
Realize other special functions.
Confirm current operation
Go to default button
Go to menu
Power button, press this button for three seconds
to boot up or shut down DVR.
Activate current control, modify setup, and then
move up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
Shift current activated control,
When playback, click these buttons to control
playback bar.
2.1.3 Economic 720P/ Economic 720P(V2)/ Economic 1080P(V2) Series
The interface is shown as below. See Figure 2-3.
39
Figure 2-3
Please refer to the following sheet for front panel button information.
SN
Icon
Name
Function
1
NET
2
PWR
3
HDD
Network abnormal
indicator light
Power indicator
light
Network error occurs or there is no network
connection, the light becomes red to alert you.
The red light becomes on when the power
connection is OK.
HDD abnormal
indicator light
HDD error occurs or HDD capacity is below
specified threshold value, the light becomes red
to alert you.
2.1.4 Economic 720P (S2) Mini 1U / General 720P (S2) Mini 1U / Advanced 720P (S2)
Mini 1U / 1080P (S2) Mini 1U / 1080P (S2) Mini 1U /720P (S2) Compact 1U/Entrylevel 720P (S2) Compact 1U Series
The front panel is shown as below. See Figure 2-4.
Figure 2-4
Please refer to the following sheet for front panel button information.
Icon
Name
Function
HDD
HDD status indicator
light
Network status indicator
light
Power status indicator light
The blue light is on when the HDD is malfunction.
NET
POWER
USB2.0 port
The blue light is on when the network connection is
abnormal.
The blue light is on when the power connection is
OK.
Connect to peripheral USB 2.0 storage device,
mouse, burner and etc.
2.2 Rear Panel
2.2.1 Economic 720P Smart 1U Series
The economic 720P rear panel is shown as below. See Figure 2-5.
40
Figure 2-5
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
VIDEO IN
Video input port
Connect to analog camera, video
input signal.
2
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
3
VGA
VGA video output
VGA video output port. Output
port
analog video signal. Can connect to
the monitor to view ananlog video
output.
4
HDMI
High
definition High definition audio and video
media interface
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
5
Network port
100M Ethernet port
6
Power input port
Input 12V DC.
7
GND
Ground end
2.2.2 Economic 720P(V2) Smart 1U Series
The 4-channel rear panel is shown as below. See Figure 2-6.
41
Figure 2-6
The 8-channel rear panel is shown as below. See Figure 2-7.
Figure 2-7
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
GND
Ground end
2
Power input port
Input 12V DC.
3
Network port
100M Ethernet port
4
VGA
VGA video output
port
5
HDMI
High
definition
media interface
6
7
USB2.0 port
VIDEO IN
Video input port
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
Connect to analog camera, video
input signal.
2.2.3 1080P(V2) Smart 1U Series
The 4-channel rear panel is shown as below. See Figure 2-8.
42
Figure 2-8
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
GND
Ground end
2
VGA
VGA video output
VGA video output port. Output
port
analog video signal. Can connect to
the monitor to view ananlog video
output.
3
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
4
VIDEO IN
Video input port
Connect to analog camera, video
input signal.
5
Power input port
Input 12V DC.
6
HDMI
High
definition High definition audio and video
media interface
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
7
Network port
100M Ethernet port
2.2.4 Econimic 720P (S2) Smart 1U/Entry-level 720P (S2) Smart 1U series
The 4-channel economic 720P (S2) smart 1U series rear panel is shown as below. See Figure 2-9.
43
Figure 2-9
The 8-channel economic 720P (S2) smart 1U series/8-channel entry-level 720P (S2) smart 1U series
rear panel is shown as below. See Figure 2-10.
Figure 2-10
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
GND
Ground end
2
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
3
Network port
100M Ethernet port
4
VGA
VGA video output
VGA video output port. Output
port
analog video signal. Can connect to
the monitor to view ananlog video
output.
5
AUDIO IN
Audio input port
Connect to audio input device such
as speaker.
6
VIDEO IN
Video input port
Connect to analog camera, video
input signal.
7
Power input port
Input 12V DC.
8
HDMI
High
definition
media interface
High definition audio and video
signal output port. It transmits
uncompressed high definition video
44
9
AUDIO OUT
Audio output port
and multiple-channel data to the
HDMI port of the display device.
Connect to video output device such
as sound box.
2.2.5 General 720P (S2) Smart 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-11.
Figure 2-11
The 8-channel series rear panel is shown as below. See Figure 2-12.
Figure 2-12
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
GND
Ground end
2
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
3
VGA
VGA video output
VGA video output port. Output
port
analog video signal. Can connect to
the monitor to view ananlog video
output.
4
AUDIO IN
Audio input port
Connect to audio input device such
45
5
VIDEO IN
6
7
Video input port
Power input port
Network port
8
HDMI
High
definition
media interface
9
AUDIO OUT
Audio output port
as speaker.
Connect to analog camera, video
input signal.
Input 12V DC.
100M Ethernet port
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to video output device such
as sound box.
2.2.6 1080P (S2) Smart 1U Series
This series rear panel is shown as below. See Figure 2-13.
Figure 2-13
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
GND
Ground end
2
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
3
VGA
VGA video output
VGA video output port. Output
port
analog video signal. Can connect to
the monitor to view ananlog video
output.
4
AUDIO IN
Audio input port
Connect to audio input device such
as speaker.
5
VIDEO IN
Video input port
Connect to analog camera, video
input signal.
6
Power input port
Input 12V DC.
7
HDMI
High
definition High definition audio and video
media interface
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
46
8
9
Network port
AUDIO OUT
Audio output port
100M Ethernet port
Connect to video output device such
as sound box.
2.2.7 General 720P Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-14.
Figure 2-14
The 8-channel series rear panel is shown as below. See Figure 2-15.
Figure 2-15
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
VIDEO IN
Video input port
Connect to analog camera, video
input signal.
2
AUDIO OUT
Audio output port
Connect to video output device such
as sound box.
3
AUDIO IN
Audio input port
Connect to audio input device such
as speaker.
4
VGA
VGA video output
VGA video output port. Output
port
analog video signal. Can connect to
the monitor to view ananlog video
output.
5
HDMI
High definition audio and video
signal output port. It transmits
High definition
uncompressed high definition video
media interface
and multiple-channel data to the
HDMI port of the display device.
6
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
7
Network port
100M Ethernet port
47
8
A
9
10
Power input port
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
Input 12V DC.
Power on-off button
Power on/off button.
11
GND
Ground end
RS485(RS-485)
communication port
B
2.2.8 General 720P(V2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-16.
Figure 2-16
The 8-channel series rear panel is shown as below. See Figure 2-17.
Figure 2-17
The 16-channel series rear panel is shown as below. See Figure 2-18.
48
Figure 2-18
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button Power on/off button.
2
VGA
3
VGA video output
port
USB2.0 port
4
AUDIO IN
Audio input port
5
VIDEO IN
Video input port
6
7
8
GND
A
Power input port
RS485(RS-485)
communication port
B
9
Network port
10
HDMI
High
definition
media interface
11
AUDIO OUT
Audio output port
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
Connect to audio input device such
as speaker.
Connect to analog camera, video
input signal.
Ground end
Input 12V DC.
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
100M Ethernet port
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to video output device such
as sound box.
2.2.9 Econimic 720P Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-19.
49
Figure 2-19
The 8-channel series rear panel is shown as below. See Figure 2-20.
Figure 2-20
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
VIDEO IN
Video input port
Connect to analog camera, video
input signal.
2
VGA
VGA video output
VGA video output port. Output
port
analog video signal. Can connect to
the monitor to view ananlog video
output.
3
HDMI
High definition audio and video
signal output port. It transmits
High definition
uncompressed high definition video
media interface
and multiple-channel data to the
HDMI port of the display device.
4
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
5
Network port
100M Ethernet port
6
Power input port
Input 12V DC.
7
GND
Ground end
2.2.10 Econimic 720P(V2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-21.
50
Figure 2-21
The 8-channel series rear panel is shown as below. See Figure 2-22.
Figure 2-22
The 16-channel series rear panel is shown as below. See Figure 2-23.
Figure 2-23
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power input port
Input 12V DC.
2
Network port
100M Ethernet port
3
VGA
VGA video output
VGA video output port. Output
51
port
4
5
6
7
8
USB2.0 port
VIDEO IN
Video input port
HDMI
GND
High
definition
media interface
Power on-off button
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
Connect to analog camera, video
input signal.
Ground end
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Power on/off button.
2.2.11 Advanced 720P Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-26.
Figure 2-24
The 8-channel series rear panel is shown as below. See Figure 2-27.
Figure 2-25
Please refer to the following sheet for detailed information.
52
SN
1
Icon
VIDEO IN
Name
Video input port
2
AUDIO OUT
Audio output port
3
AUDIO IN
Audio input port
4
VGA
VGA video output
port
5
HDMI
High definition
media interface
6
USB2.0 port
7
Network port
8
A
RS485(RS-485)
communication port
B
9
10
Power input port
Power on-off button
Note
Connect to analog camera, video
input signal.
Connect to video output device such
as sound box.
Connect to audio input device such
as speaker.
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
100M Ethernet port
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
Input 12V DC.
Power on/off button.
11
12
Alarm input/Alarm
output
Input/output alarm signal.
GND
Ground end
2.2.12 Advanced 720P (V2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-26.
Figure 2-26
53
The 8-channel series rear panel is shown as below. See Figure 2-27.
Figure 2-27
The 16-channel series rear panel is shown as below. See Figure 2-28.
Figure 2-28
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button Power on/off button.
2
Alarm input/Alarm
output
3
VGA
VGA video output
port
4
AUDIO IN
Audio input port
5
VIDEO IN
Video input port
6
7
8
GND
A
Power input port
RS485(RS-485)
Input/output alarm signal.
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to audio input device such
as speaker.
Connect to analog camera, video
input signal.
Ground end
Input 12V DC.
RS485_A port. It is the cable A. You
can connect to the control devices
54
communication port
B
9
10
Network port
HDMI
11
12
High
definition
media interface
USB2.0 port
AUDIO OUT
Audio output port
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
100M Ethernet port
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
Connect to video output device such
as sound box.
2.2.13 General 1080P(V2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-29.
Figure 2-29
The 8-channel series rear panel is shown as below. See Figure 2-30.
Figure 2-30
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button Power on/off button.
2
VGA
VGA video output
VGA video output port. Output
55
port
3
USB2.0 port
4
HDMI
High
definition
media interface
5
AUDIO IN
Audio input port
6
VIDEO IN
Video input port
7
GND
8
9
Power input port
RS485(RS-485)
communication port
A
B
10
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to audio input device such
as speaker.
Connect to analog camera, video
input signal.
Ground end
Input 12V DC.
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
Network port
100M Ethernet port
11
AUDIO OUT
Audio output port
Connect to video output device such
as sound box.
2.2.14 Econimic 1080P(V2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-31.
Figure 2-31
The 8-channel series rear panel is shown as below. See Figure 2-32.
56
Figure 2-32
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
VGA
VGA video output
VGA video output port. Output
port
analog video signal. Can connect to
the monitor to view ananlog video
output.
2
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
3
VIDEO IN
Video input port
Connect to analog camera, video
input signal.
4
GND
Ground end
5
Power input port
Input 12V DC.
6
HDMI
High
definition High definition audio and video
media interface
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
7
Network port
100M Ethernet port
8
Power on-off button
Power on/off button.
2.2.15 Advanced 1080P (V2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-33.
Figure 2-33
57
The 8-channel series rear panel is shown as below. See Figure 2-34.
Figure 2-34
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
2
3
Alarm input/Alarm
output
Input/output alarm signal.
Power on-off button
Power on/off button.
Network port
100M Ethernet port
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to audio input device such
as speaker.
Connect to analog camera, video
input signal.
Ground end 0
4
VGA
VGA video output
port
5
AUDIO IN
Audio input port
6
VIDEO IN
Video input port
7
8
9
GND
A
Power input port
RS485(RS-485)
communication port
B
10
USB2.0 port
11
HDMI
High
definition
media interface
12
AUDIO OUT
Audio output port
Input 12V DC.
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to video output device such
as sound box.
2.2.16 Econimic 720P (S2) Mini 1U Series
58
The 4-channel series rear panel is shown as below. See Figure 2-35.
Figure 2-35
The 8-channel series rear panel is shown as below. See Figure 2-36.
Figure 2-36
The 16-channel series rear panel is shown as below. See Figure 2-37.
Figure 2-37
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button Power on/off button.
59
2
Alarm input/Alarm
output
3
VGA
VGA video output
port
4
AUDIO IN
Audio input port
5
AUDIO OUT
Audio output port
6
VIDEO IN
Video input port
7
8
9
GND
A
Power input port
RS485(RS-485)
communication port
B
10
USB2.0 port
11
Network port
Input/output alarm signal.
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to audio input device such
as speaker.
Connect to video output device such
as sound box.
Connect to analog camera, video
input signal.
Ground end 0
Input 12V DC.
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
100M Ethernet port
12
HDMI
High
definition
media interface
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
2.2.17 General 720P (S2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-38.
60
Figure 2-38
The 8-channel series rear panel is shown as below. See Figure 2-39.
Figure 2-39
The 16-channel series rear panel is shown as below. See Figure 2-40.
Figure 2-40
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button Power on/off button.
2
VGA
VGA video output
port
3
AUDIO IN
Audio input port
4
VIDEO IN
Video input port
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to audio input device such
as speaker.
Connect to analog camera, video
input signal.
5
6
7
A
Power input port
Input 12V DC.
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
RS485_A port. It is the cable A. You
can connect to the control devices
RS485(RS-485)
61
communication port
B
8
Network port
9
HDMI
High
definition
media interface
10
AUDIO OUT
Audio output port
11
GND
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
100M Ethernet port
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to video output device such
as sound box.
Ground end
2.2.18 Advanced 720P (S2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-41.
Figure 2-41
The 8-channel series rear panel is shown as below. See Figure 2-42.
Figure 2-42
The HCVR5116HE-S2 series rear panel is shown as below. See Figure 2-43.
62
Figure 2-43
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button Power on/off button.
2
Alarm input/Alarm
output
Input/output alarm signal.
3
VGA
VGA video output
port
4
AUDIO IN
Audio input port
5
AUDIO OUT
Audio output port
Connect to video output device such
as sound box.
6
VIDEO IN
Video input port
Connect to analog camera, video
input signal.
Ground end
7
GND
8
Power input port
9
HDMI
High
definition
media interface
10
A
RS485(RS-485)
communication port
B
11
Network port
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to audio input device such
as speaker.
Input 12V DC.
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
100M Ethernet port
63
12
HDMI
High
definition
media interface
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
2.2.19 1080P (S2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-44.
Figure 2-44
The 8-channel series rear panel is shown as below. See Figure 2-45.
Figure 2-45
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button Power on/off button.
2
VGA
VGA video output
port
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
64
3
AUDIO IN
Audio input port
4
VIDEO IN
Video input port
Connect to audio input device such
as speaker.
Connect to analog camera, video
input signal.
5
Power input port
Input 12V DC.
6
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
100M Ethernet port
7
A
RS485 ( RS-485 )
communication port
B
8
HDMI
9
10
11
High
definition
media interface
Network port
AUDIO OUT
Audio output port
GND
Connect to video output device such
as sound box.
Ground end
2.2.20 1080P (S2) Mini 1U Series
The 4-channel series rear panel is shown as below. See Figure 2-46.
Figure 2-46
The 8-channel series rear panel is shown as below. See Figure 2-47.
65
Figure 2-47
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button Power on/off button.
2
Alarm input/Alarm
output
Input/output alarm signal.
3
VGA
VGA video output
port
4
AUDIO IN
Audio input port
5
AUDIO OUT
Audio output port
Connect to video output device such
as sound box.
6
VIDEO IN
Video input port
GND
Connect to analog camera, video
input signal.
Ground end
Power input port
Input 12V DC.
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
100M Ethernet port
7
8
9
10
A
RS485 ( RS-485 )
communication port
B
11
12
HDMI
High
definition
media interface
Network port
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to audio input device such
as speaker.
2.2.21 720P (S2) Compact 1U/ Entry-level 720P (S2) Compact 1U Series
The 4-channel 720P (S2) compact 1U series rear panel is shown as below. See Figure 2-48.
66
Figure 2-48
The 8-channel 720P (S2) compact 1U/ entry-level 720P (S2) compact 1U series rear panel is shown as
below. See Figure 2-49.
Figure 2-49
The 16-channel 720P (S2) compact 1U// entry-level 720P (S2) compact 1U series rear panel is shown
as below. See Figure 2-50.
Figure 2-50
Please refer to the following sheet for detailed information.
67
SN
1
2
Icon
A
Name
Power input port
RS485 ( RS-485 )
communication port
B
3
Note
Input 12V DC.
RS485_A port. It is the cable A. You
can connect to the control devices
such as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such
as speed dome PTZ.
USB2.0 port
Connect to USB storage device,
mouse, burning DVD-ROM and etc.
4
Network port
5
VGA
VGA video output
port
6
AUDIO IN
Audio input port
7
VIDEO IN
Video input port
8
GND
9
HDMI
High
definition
media interface
10
AUDIO OUT
Audio output port
100M Ethernet port
VGA video output port. Output
analog video signal. Can connect to
the monitor to view ananlog video
output.
Connect to audio input device such
as speaker.
Connect to analog camera, video
input signal.
Ground end
High definition audio and video
signal output port. It transmits
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to video output device such
as sound box.
When connect the Ethernet port, please use crossover cable to connect the PC and use the straight
cable to connect to the switcher or router.
2.3 Connection Sample
2.3.1 Economic 720P Smart 1U Series
Please refer to Figure 2-51 for connection sample.
68
Figure 2-51
2.3.2 General 720P Mini 1U Series
Please refer to Figure 2-52 for connection sample.
The following figure is based on the 8-channel general 720P mini 1U series product.
69
Figure 2-52
2.3.3 Economic 720P /Advanced 720P Mini 1U Series
Please refer to Figure 2-53 for connection sample.
The following figure is based on the 8-channel economic 720P mini 1U series product.
70
Figure 2-53
2.3.4 Economic 720P(V2) /1080P(V2) Smart 1U Series
Please refer to Figure 2-54 for connection sample.
The following figure is based on the 4-channel 1080P(V2) smart 1U series product.
71
Figure 2-54
2.3.5 General 720P(V2) /General 1080P(V2) Mini 1U Series
Please refer to Figure 2-55 for connection sample.
The following figure is based on the 8-channel general 1080P(V2) mini 1U series product.
72
Figure 2-55
2.3.6 Advanced 720P (V2) /Advanced 1080P (V2) Mini 1USeries
Please refer to Figure 2-56 for connection sample.
The following figure is based on the 16-channel advanced 720P (V2) mini 1U series product.
73
Figure 2-56
2.3.7 Economic 720P(V2) /Economic 1080P(V2) Mini 1U Series
Please refer to Figure 2-57 for connection sample.
The following figure is based on the 8-channel economic 1080P(V2) mini 1U series product.
74
Figure 2-57
2.3.8 Econimic 720P (S2) Smart 1U/ Entry-level 720P (S2) Smart 1U Serias
Please refer to Figure 2-58 for connection sample.
The following figure is based on the 4-channel economic 720P (S2) smart 1U series product.
75
Figure 2-58
2.3.9 General 720P (S2) Smart 1U Series
Please refer to Figure 2-59 for connection sample.
The following figure is based on the 8-channel series product.
76
Figure 2-59
2.3.10 1080P (S2) Smart 1U Series
Please refer to Figure 2-60 for connection sample.
77
Figure 2-60
2.3.11 Econimic 720P (S2) Mini 1U Series
Please refer to Figure 2-61 for connection sample.
The following figure is based on the 4-channel series product.
78
Figure 2-61
2.3.12 General 720P (S2) Mini 1U Series
Please refer to Figure 2-62 for connection sample.
The following figure is based on the 4-channel series product.
79
Figure 2-62
2.3.13 Advanced 720P (S2) Mini 1U Series
Please refer to Figure 2-63 for connection sample.
The following figure is based on the 8-channel series product.
80
Figure 2-63
2.3.14 1080P (S2) Mini 1U Series
Please refer to Figure 2-64 for connection sample.
The following figure is based on the 8-channel series product.
81
Figure 2-64
2.3.15 1080P (S2) Mini 1U Series
Please refer to Figure 2-65 for connection sample.
The following figure is based on the 8-channel series product.
82
Figure 2-65
2.3.16 720P (S2) Compact 1U/ Entry-level 720P (S2) Compact 1U Series
Please refer to Figure 2-65 for connection sample.
The following figure is based on the 8-channel series product.
83
Figure 2-66
2.4 Remote Control
The remote control interface is shown as in Figure 2-67.
Please note remote control is not our standard accessory and it is not included in the accessory bag.
84
Figure 2-67
Please refer to the following sheet for detailed information.
Serial Number
Name
Function
1
Power button
Click it to boot up or shut down
the device.
2
Address
Click it to input device number,
so that you can control it.
3
Forward
4
Slow play
Various forward speeds and
normal speed playback.
Multiple slow play speeds or
normal playback.
In playback mode, playback the
next video.
In playback mode, playback the
previous video.
In pause mode, click this button
to realize normal playback.
In normal playback click this
button to pause playback.
In real-time monitor mode, click
this button to enter video search
menu.
Reverse playback pause mode,
click this button to realize normal
playback.
In reverse playback click this
button to pause playback.
Next record
5
Previous record
6
7
Play/Pause
Reverse/pause
8
85
Cancel
9
10
Record
11
Direction keys
12
Confirm /menu key
13
Multiple-window switch
14
Auxiliary key
15
0-9 number key
Go back to previous menu or
cancel current operation (close
upper interface or control)
Start or stop record manually
In record interface, working with
the direction buttons to select the
record channel.
Click this button for at least 1.5
seconds, system can go to the
Manual Record interface.
Switch current activated control,
go to left or right.
In playback mode, click up/down
button to switch playback
channel. In 1-window playback
mode, click left/right button to
control playback speed. .
Aux function(such as switch the
PTZ menu, enable/disable reuse
button)
go to default button
go to the menu
Switch between multiple-window
and one-window.
In 1-ch monitor mode: pop up
assistant function:PTZ control
and Video color.
Switch the PTZ control menu in
PTZ control interface.
In motion detection interface,
working with direction keys to
complete setup.
In text mode, click it to delete
character.
Input password, channel or
switch channel.
Shift is the button to switch the
input method.
2.5 Mouse Control
Left click
mouse
System pops up password input dialogue box if you have not logged in.
In real-time monitor mode, you can go to the main menu.
When you have selected one menu item, left click mouse to view menu
content.
Implement the control operation.
Modify checkbox or motion detection status.
Click combo box to pop up drop down list
86
In input box, you can select input methods. Left click the corresponding button
on the panel you can input numeral/English character (small/capitalized). Here
← stands for backspace button. _ stands for space button.
In English input mode: _stands for input a backspace icon and ← stands for
deleting the previous character.
In numeral input mode: _ stands for clear and ← stands for deleting the
previous numeral.
When input special sign, you can click corresponding numeral in the front
panel to input. For example, click numeral 1 you can input“/” , or you can click
the numeral in the on-screen keyboard directly.
Double left
click mouse
Right click
mouse
Press
middle
button
Move mouse
Drag mouse
Implement special control operation such as double click one item in the file list
to playback the video.
In multiple-window mode, double left click one channel to view in full-window.
Double left click current video again to go back to previous multiple-window
mode.
In real-time monitor mode, pops up shortcut menu: one-window, four-window,
nine-window and sixteen-window, Pan/Tilt/Zoom, color setting, search, record,
alarm input, alarm output, main menu.
Among which, Pan/Tilt/Zoom and color setting applies for current selected
channel.
If you are in multiple-window mode, system automatically switches to the
corresponding channel.
Exit current menu without saving the modification.
In numeral input box: Increase or decrease numeral value.
Switch the items in the check box.
Page up or page down
Select current control or move control
Select motion detection zone
Select privacy mask zone.
87
3 Installation and Connections
Note: All the installation and operations here should conform to your local electric
safety rules.
3.1 Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the DVR can protect most accidental clashes
during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list. Finally you can remove the protective film of the DVR.
3.2 About Front Panel and Rear Panel
The model label in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number
when we provide the service after sales.
3.3 HDD Installation
Important
Shut down the device and then unplug the power cable before you open the case to
replace the HDD!
All figures listed below for reference only!
You can refer to the Appendix for recommended HDD brand. Please use HDD of 7200rpm or higher.
Please follow the instructions below to install hard disk.
3.3.1 Economic 720P /Economic 720P(V2) /1080P(V2)/ Economic 720P (S2) Smart
1U/ General 720P (S2) Smart 1U/1080P (S2) Smart 1U/ Entry-level 720P (S2)
Smart 1U Series
The series DVR has one SATA HDD.
○,1. Loosen the screws of the upper
○,2 Fix four screws in the
○,3 Place the HDD in
cover and side panel.
HDD (Turn just three rounds).
accordance with the four holes
in the bottom.
88
○,4 Turn the device upside down and ○,5 Fix the HDD firmly.
○,6 Connect the HDD cable
then turn the screws in firmly.
and power cable.
○,7 Put the cover in accordance with
○,8 Secure the screws in the rear panel and the side panel.
the clip and then place the upper cover
back.
3.3.2 General 720P /Economic 720P /Advanced 720P /General 720P(V2) /Economic
720P(V2) /Advanced 720P (V2) /General 1080P(V2) /Economic 1080P(V2)
/Advanced 1080P (V2)/ Economic 720P (S2) Mini 1U/ General 720P (S2) Mini
1U/ Advanced 720P (S2) Mini 1U/1080P (S2) Mini 1U/1080P (S2) Mini 1U/720P
(S2) Compact 1U/ Entry-level 720P (S2) Compact 1U Series
The series DVR has one SATA HDD.
① Loosen the screws of the upper
cover and side panel.
② Fix four screws in the HDD (Turn
③ Place the HDD in accordance
just three rounds).
with the four holes in the bottom.
④ Turn the device upside down and
⑤Fix the HDD firmly.
⑥Connect the HDD cable and
then turn the screws in firmly.
power cable.
89
⑦Put the cover in accordance with the
⑧Secure the screws in the rear panel
clip and then place the upper cover
back.
and the side panel.
Important:
 You can connect the HDD data cable and the power cable first and then fix the HDD in the device.
 Please pay attention to the front cover. It adopts the vertical sliding design. You need to push the
clip first and then put down.
3.4 Connecting Power Supply
Please check input voltage and device power button match or not.
We recommend you use UPS to guarantee steady operation, DVR life span, and other peripheral
equipments operation such as cameras.
3.5 Connecting Video Input and Output Devices
3.5.1 Connecting Video Input
The video input interface is BNC. The input video format includes: PAL/NTSC BNC(1.0V P- P ,
75Ω.)
The video signal should comply with your national standards.
The input video signal shall have high SNR, low distortion; low interference, natural color and suitable
lightness.
Guarantee the stability and reliability of the camera signal:
The camera shall be installed in a cool, dry place away from direct sunlight, inflammable, explosive
substances and etc.
The camera and the DVR should have the same grounding to ensure the normal operation of the
camera.
Guarantee stability and reliability of the transmission line
Please use high quality, sound shielded BNC. Please select suitable BNC model according to the
transmission distance.
If the distance is too long, you should use twisted pair cable, and you can add video compensation
devices or use optical fiber to ensure video quality.
You should keep the video signal away from the strong electromagnetic interference, especially the high
tension current.
Keep connection lugs in well contact
The signal line and shielded wire should be fixed firmly and in well connection. Avoid dry joint, lap
welding and oxidation.
B
B
BTTTB
BTTTB
BTTTB
90
3.5.2 Connecting Video Output
Video output includes a BNC(PAL/NTSC1.0V P-P ,75Ω)output ,a VGA output and HDMI output. System
supports BNC, VGA and HDMI output at the same time.
When you are using pc-type monitor to replace the monitor, please pay attention to the following points:
 To defer aging, do not allow the pc monitor to run for a long time.
 Regular demagnetization will keep device maintain proper status.
 Keep it away from strong electromagnetic interference devices.
Using TV as video output device is not a reliable substitution method. You also need to reduce the
working hour and control the interference from power supply and other devices. The low quality TV may
result in device damage.
3.6 Connecting Audio Input & Output, Bidirectional Audio
3.6.1 Audio Input
These series products audio input port adopt BNC port.
Due to high impedance of audio input, please use active sound pick-up.
Audio transmission is similar to video transmission. Try to avoid interference, dry joint, loose contact and
it shall be away from high tension current.
3.6.2 Audio Output
The audio output signal parameter is usually over 200mv 1KΩ (BNC or RCA). It can directly connect to
low impedance earphone, active sound box or amplifier-drive audio output device.
If the sound box and the pick-up cannot be separated spatially, it is easy to arouse squeaking. In this
case you can adopt the following measures:
 Use better sound pick-up with better directing property.
 Reduce the volume of the sound box.
 Using more sound-absorbing materials in decoration can reduce voice echo and improve acoustics
environment.
 Adjust the layout to reduce happening of the squeaking.
3.7 Alarm Input and Output Connection
Please read the followings before connecting.
1. Alarm input
a. Please make sure alarm input mode is grounding alarm input.
b. Grounding signal is needed for alarm input.
c. Alarm input needs the low level voltage signal.
d. Alarm input mode can be either NC (normal Open) or NO (Normal Close)
e. When you are connecting two DVRs or you are connecting one DVR and one other device, please
use a relay to separate them,
2. Alarm output
The alarm output port should not be connected to high power load directly (It shall be less than 1A) to
avoid high current which may result in relay damage. Please use the co contactor to realize the
connection between the alarm output port and the load.
91
3. How to connect PTZ decoder
a. Ensure the decoder has the same grounding with DVR, otherwise you may not control the PTZ.
Shielded twisted wire is recommended and the shielded layer is used to connect to the grounding.
b. Avoid high voltage. Ensure proper wiring and some thunder protection measures.
c. For too long signal wires, 120Ω should be parallel connected between A, B lines on the far end to
reduce reflection and guarantee the signal quality.
d. “485 A, B” of DVR cannot parallel connect with “485 port” of other device.
e. The voltage between of A,B lines of the decoder should be less than 5v.
4. Please make sure the front-end device has soundly earthed.
Improper grounding may result in chip damage.
3.7.1 Alarm Input and Output Details
Important
Please refer to the specifications for the alarm input and output channel amount. Do not merely
count the alarm input and out channel amount according to the ports on the rear panel.
The following interface is based on the 8-channel advanced 1080P (V2) mini 1U Series. See Figure 3-1.
Figure 3-1
1,2,3,4,5,
6,7,8,9,10,
11,12,13,14,
15,16
NO1 C1,NO2 C2,
NO3 C3,
ALARM 1 to ALARM 16. The alarm becomes active in low voltage.
Three normal open groups (on/off signal)
Earth cable.
3.7.2 Alarm Input Port
Please refer to the following sheet for more information.





Grounding alarm inputs. Normal open or Normal close type)
Please parallel connect COM end and GND end of the alarm detector (Provide external power to the
alarm detector).
Please parallel connect the Ground of the DVR and the ground of the alarm detector.
Please connect the NC port of the alarm sensor to the DVR alarm input(ALARM)
Use the same ground with that of DVR if you use external power to the alarm device.
92
Figure 3-2
3.7.3 Alarm Output Port



Provide external power to external alarm device.
To avoid overloading, please read the following relay parameters sheet carefully.
RS485 A/B cable is for the A/B cable of the PTZ decoder.

T+,T-,R+,R- are four-wire double duplex RS485 port.
T+ T-: output wire
R+ R-: input wire
Relay Specification
Model:
JRC-27F
Material of the
touch
Silver
Rating
(Resistance
Load)
Rated switch capacity
30VDC 2A, 125VAC 1A
Maximum switch power
125VA 160W
Maximum switch voltage
250VAC, 220VDC
Maximum switch currency
Between touches with same
polarity
1A
Between touches with different
polarity
1000VAC 1minute
Between touch and winding
Between touches with same
polarity
3ms max
1000VAC 1minute
Insulation
Surge voltage
Length of open
time
1000VAC 1minute
1500V (10×160us)
Length of close
time
3ms max
Longevity
Mechanical
50×106 times (3Hz)
Electrical
200×103 times (0.5Hz)
Temperature
-40℃ ~+70℃
3.8 RS485
93
When the DVR receives a camera control command, it transmits that command up the coaxial cable to the
PTZ device. RS485 is a single-direction protocol; the PTZ device can’t return any data to the unit. To enable
the operation, connect the PTZ device to the RS485 (A,B) input on the DVR.
Since RS485 is disabled by default for each camera, you must enable the PTZ settings first. This series
DVRs support multiple protocols such as Pelco-D, Pelco-P.
To connect PTZ devices to the DVR:
1. Connect RS485 A,B on the DVR rear panel.
2. Connect the other end of the cable to the proper pins in the connector on the camera.
3. Please follow the instructions to configure a camera to enable each PTZ device on the DVR.
3.9 Other Interfaces
There are still other interfaces on the DVR, such as USB port.
94
4 Overview of Navigation and Controls
4.1 Boot up and Shutdown
4.1.1 Boot up
Before the boot up, please make sure:
 The rated input voltage matches the device power on-off button. Please make sure the power wire
connection is OK. Then click the power on-off button.
 Always use the stable current, if necessary UPS is a best alternative measure.
Please follow the steps listed below to boot up the device.
 Connect the device to the monitor and then connect a mouse.
 Connect power cable.
 Click the power button at the front or rear panel and then boot up the device. After device booted up,
the system is in multiple-channel display mode by default.
4.1.2 Shutdown
Note
 When you see corresponding dialogue box “System is shutting down…” Do not click power on-off
button directly.
 Do not unplug the power cable or click power on-off button to shutdown device directly when device
is running (especially when it is recording.)
There are three ways for you to log out.
a) Main menu (RECOMMENDED)
From Main Menu->Shutdown, select shutdown from dropdown list.
Click OK button, you can see device shuts down.
b) From power on-off button on the front panel or remote control
Press the power on-off button on the DVR front panel or remote control for more than 3 seconds to
shutdown the device.
c)
From power on-off button on the rear panel.
4.1.3 Auto Resume after Power Failure
The system can automatically backup video and resume previous working status after power failure.
4.1.4 Replace Button Battery
Please make sure to use the same battery model if possible.
We recommend replace battery regularly (such as one-year) to guarantee system time accuracy.
Note:
Before replacement, please save the system setup, otherwise, you may lose the data
completely!
4.2 Startup Wizard
After device successfully booted up, it goes to startup wizard.
Click Cancel/Next button, you can see system goes to login interface.
Tips
95
Check the box Startup button here, system goes to startup wizard again when it boots up the next time.
Cancel the Startup button, system goes to the login interface directly when it boots up the next time.
Figure 4-1
Click Cancel button or Next Step button, system goes to login interface. See Figure 4-2.
System consists of four accounts:
 Username: admin. Password: admin. (administrator, local and network)
 Username: 888888. Password: 888888. (administrator, local only)
 Username: 666666. Password: 666666(Lower authority user who can only monitor, playback,
backup and etc.)
 Username: default. Password: default (hidden user). Hidden user “default” is for system interior
use only and can not be deleted. When there is no login user, hidden user “default” automatically
login. You can set some rights such as monitor for this user so that you can view some channel
view without login.
Figure 4-2
Note:
For security reason, please modify password after you first login.
Within 30 minutes, three times login failure will result in system alarm and five times login failure will
result in account lock!
Click OK button, you can go to General interface. See Figure 4-3.
For detailed information, please refer to chapter 4.10.5.1.
96
Figure 4-3
Click Next button, you can go to network interface. See Figure 4-4.
For detailed information, please refer to chapter 4.9.3.
Figure 4-4
Click Next button, you can go to Schedule interface. See Figure 4-5.
For detailed information, please refer to chapter 4.10.4.1.1.
97
Figure 4-5
Click Finish button, system pops up a dialogue box. Click the OK button, the startup wizard is complete.
See Figure 4-6.
Figure 4-6
4.3 Manual Record
4.3.1
Live Viewing
After you logged in, the system is in live viewing mode. You can see system date, time, channel
name and window No. If you want to change system date and time, you can refer to general settings
(Main Menu->Setting->System->General). If you want to modify the channel name, please refer to
the display settings (Main Menu->Camera->CAM name).
1
Recording status
3
Video loss
2
Motion detection
4
Camera lock
Tips
98


Preview drag: If you want to change position of channel 1 and channel 2 when you are
previewing, you can left click mouse in the channel 1 and then drag to channel 2, release
mouse you can switch channel 1 and channel 2 positions.
Use mouse middle button to control window split: You can use mouse middle button to switch
window split amount.
Preview Control
The preview control function has the following features.
 Support preview playback.
 In the preview desktop, system can playback previous 5-60 minutes record of current
channel. Please go to the Main Menu->General to set real-time playback time.
 Support drag and play function. You can use your mouse to select any playback start time.
 Support playback, pause and exit function.
 Right now, system does not support slow playback and backward playback function.
 Support digital zoom function.
 Support real-time backup function.
You can follow the contents listed below for the operation instruction.
Preview control interface
Move you mouse to the top centre of the video of current channel, you can see system pops up the
preview control interface. See Figure 4-7 and Figure 4-8. If your mouse stays in this area for more
than 6 seconds and has no operation, the control bar automatically hides.
1
2
3
4
5
Figure 4-7 Analog Channel
1
2
3
4
6
7
Figure 4-8 Digital Channel
1) Realtime playback
It is to playback the previous 5-60 minutes record of current channel.
Please go to the Main menu->Setting->->System->General to set real-time playback time.
System may pop up a dialogue box if there is no such record in current channel.
2) Digital zoom
It is to zoom in specified zone of current channel. It supports zoom in function of multiple -channel.
Click button
, the button is shown as
.
There are two ways for you to zoom in.
 Drag the mouse to select a zone, you can view an interface show as Figure 4-9.
99
Figure 4-9

Put the middle button at the centre of the zone you want to zoom in, and move the mouse, you
can view an interface shown as in Figure 4-10.
Figure 4-10
Right click mouse to cancel zoom and go back to the original interface.
3) Manual record function
It is to backup the video of current channel to the USB device. System can not backup the video of
multiple-channel at the same time.
Click button
, system begins recording. Click it again, system stops recoridng. You can find the
record file on the flash disk.
4) Manual Snapshot
Click
to snapshot 1-5 times. The snapshot file is saved on the USB device or HDD. You can go to
the Search interface (chapter 4.8.1) to view.
5) Mute (For analog channel only)
Click to mute. Click again to enable audio function when preview.
Please note this function is for one-window mode only or the max-size window of the 8-window
mode.
6) Bidirectional talk (For digital channel only)
If the connected front-end device supports bidirectional talk function, you can click this button. Click
button
to start bidirectional talk function the icon now is shown as
. Now the rest
bidirectional talk buttons of digital channel becomes null too.
Click
again, you can cancel bidirectional talk and the bidirectional talk buttons of other digital
channels become as
.
7) Remote device (For digital channel only)
Shortcut menu. Click it to go to the remote device interface to add/delete remote device or view its
corresponding information. Please refer to chapter4.10.1.1 for detailed information.
100
4.4 Right-Click Menu
On the preview interface, right click mouse, you can view menu interface shown as in Figure 4-11.
Tips
After you go to the corresponding interface, right click mouse to go back to the upper-level.
Figure 4-11
4.4.1 Window Switch
System supports 1/4-window. You can select from the dropdown list. See Figure 4-12.
Figure 4-12
4.4.2 PTZ Control
The PTZ setup is shown as in See Figure 4-13.
Please note the commend name is grey once device does not support this function.
The PTZ operation is only valid in one-window mode.
Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern aux function,
light and wiper, rotation and etc.
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is faster than
speed 1. You can use the remote control to click the small keyboard to set.
You can click
and
of the zoom, focus and iris to zoom in/out, definition and brightness.
The PTZ rotation supports 8 directions. If you are using direction buttons on the front panel, there are
only four directions: up/down/left/right.
101
Figure 4-13
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure 4-14.
Please make sure your protocol supports this function and you need to use mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to adjust
section size. The dragged zone supports 4X to 16X speeds. It can realize PTZ automatically. The
smaller zone you dragged, the higher the speed.
Figure 4-14
Name
Function
key
function
Zoom
Near
Focus
Near
Iris
close
In Figure 4-13, click
Shortcut
key
Function
key
function
Far
Shortcut
key

│
Far
►│

Open

to open the menu, you can set preset, tour, pattern, scan and etc. See
Figure 4-15.
Figure 4-15
Please refer to the following sheet for detailed information.
Please note the above interface may vary due to different protocols. The button is grey and can not
be selected once the current function is null.
Right click mouse or click the ESC button at the front panel to go back to the Figure 4-13.
Icon
Function
Preset
Icon
Function
Flip
102
Tour
Reset
Pattern
Aux
Scan
Aux on-off
button
Rotate
Go to menu
4.4.2.1 PTZ Function Setup
Click
, you can go to the following interface to set preset, tour, pattern, and scan. See Figure 4-16.
Figure 4-16
Preset Setup
In Figure 4-16, click preset button and use eight direction arrows to adjust camera to the proper position.
The interface is shown as in Figure 4-17.
Click Set button and then input preset number.
Click Set button to save current preset.
Figure 4-17
Tour Setup
In Figure 4-16, click tour button.
103
Input tour value and preset No. Click Add preset button to add current preset to the tour. See Figure
4-18.
Tips
Repeat the above steps to add more presets to the tour. Click Del preset button to remove it from the
tour. Please note some protocols do not support delete preset function.
Figure 4-18
Pattern Setup
In Figure 4-16, click Pattern button and input pattern number.
Click Begin button to start direction operation. Or you can go back to Figure 4-13 to operate
zoom/focus/iris/direction operation.
In Figure 4-16, click End button.
Figure 4-19
Scan Setup
In Figure 4-16, click Scan button.
Use direction buttons to set camera left limit and then click Left button.
Use direction buttons to set camera right limit and then click Right button. Now the scan setup process is
complete.
104
Figure 4-20
4.4.2.2 Call PTZ Function
Call Preset
In Figure 4-15, input preset value and then click
to call a preset. Click
again to stop call.
Call Pattern
In Figure 4-15, input pattern value and then click
call.
to call a pattern. Click
again to stop
Call Tour
In Figure 4-15, input tour value and then click
to call a tour. Click again
to stop call.
Call Scan
In Figure 4-15, input Scan value and then click
to call a tour. Click again
to stop call.
Rotate
In Figure 4-15, click
to enable the camera to rotate.
System supports preset, tour, pattern, scan, rotate, light and etc function.
Note:
 Preset, tour and pattern all need the value to be the control parameters. You can define it as you
require.
 You need to refer to your camera user’s manual for Aux definition. In some cases, it can be used for
special process.
Aux
Click
, system goes to the following interface. The options here are defined by the protocol. The
aux number is corresponding to the aux on-off button of the decoder. See Figure 4-21.
105
Figure 4-21
4.4.3 Color
Here you can set hue, brightness, contrast, saturation, gain, white level, color mo de and etc. See
Figure 4-22.
Figure 4-22
Please refer to the following sheet for detailed information.
Item
Note
Period
There are two periods in one day. You can set different
sharpness, brightness, and contrast setup for different periods.
Check the box here to enable this function and then set period
time.
The value here is to adjust the edge of the video. The value
ranges from 0 to 100. The larger the value is, the clear the
edge is and vice versa. Please note there is noise if the value
here is too high. The default value is 50 and the recommended
value ranges from 40 to 60.
Effective Time
Sharpness
Brightness
It is to adjust monitor window bright. The value ranges from 0
106
Item
Note
to 100. The default value is 50.
The larger the number, the bright the video is. When you input
the value here, the bright section and the dark section of the
video will be adjusted accordingly. You can use this function
when the whole video is too dark or too bright. Please note the
video may become hazy if the value is too high. The
recommended value ranges from 40 to 60.
Contrast
It is to adjust monitor window contrast. The value ranges from
0 to 100. The default value is 50.
The larger the number, the higher the contrast is. You can use
this function when the whole video bright is OK but the contrast
is not proper. Please note the video may become hazy if the
value is too low. If this value is too high, the dark section may
lack brightness while the bright section may over
exposure .The recommended value ranges from 40 to 60.
Saturation
It is to adjust monitor window saturation. The value ranges
from 0 to 100. The default value is 50.
Position
The larger the number, the strong the color is. This value has
no effect on the general brightness of the whole video. The
video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white
balance is not accurate. Please note the video may not be
attractive if the value is too low. The recommended value
ranges from 40 to 60.
It includes several modes such as standard, color, bright,
gentle. Select a color mode, the sharpness, brightness,
contrast and etc can automatically switch to corresponding
setup.
Click reset button, device can automatically adjust to the best
display effect.
It is to adjust the image position on the screen.
Customized
Click it to set customized color mode.
Color mode
EQ
4.4.4 Search
Please refer to chapter 4.8.1 for detailed information.
4.4.5 Manual Record
Please refer to chapter 4.10.4.3.1 for detailed information.
4.5 Navigation Bar
You need to go to the Main menu->Setting->System->General to enable navigation bar function;
otherwise you can not see the following interface.
The navigation bar is shown as below. See Figure 4-23.
Figure 4-23
107
4.5.1 Main Menu
Click button
to go to the main menu interface.
4.5.2 Output Screen
Select corresponding window-split mode and output channels.
4.5.3 Favorites
Click
, system pops up the favorites schemes. Click one item, you can view saved favorite channel
split mode and channel number. See Figure 4-24.
Please note, right now the favorite scheme name after the window split mode.
Figure 4-24
4.5.4 Tour
Click button
to enable tour, the icon becomes
, you can see the tour is in process.
4.5.5 PTZ
Click
, system goes to the PTZ control interface. Please refer to chapter 4.4.2.
4.5.6 Color
Click button
, system goes to the color interface. Please refer to chapter 4.4.3.
4.5.7 Search
Click button
, system goes to search interface. Please refer to chapter 4.8.1
4.5.8 Alarm Status
Click button
, system goes to alarm status interface. It is to view device status and channel status.
Please refer to chapter 4.10.3.
4.5.9 Channel Info
Click button
, system goes to the channel information setup interface. It is to view information of the
corresponding channel. See Figure 4-25.
108
Figure 4-25
4.5.10 Remote Device
Click
, system goes to an interface for you to view remote device information. Please refer to
chapter 4.10.1.1.
4.5.11 Network
Click
, system goes to the network interface. It is to set network IP address, default gateway and etc.
Please refer to chapter 4.10.2.
4.5.12 HDD Manager
Click
, system goes to the HDD manager interface. It is to view and manage HDD information.
Please refer to chapter 4.10.4.2.
4.5.13 USB Manager
Click
, system goes to the USB Manager interface. It is to view USB information, backup and
update. Please refer to chapter 4.8.2, chapter 4.9.4, chapter 4.10.5.7, and chapter 4.10.5.9 for detailed
information.
4.6 USB Device Auto Pop-up
After you inserted the USB device, system can auto detect it and pop up the following dialogue box. It
allows you to conveniently backup file, log, configuration or update system. See Figure 4-26. Please
refer to chapter 4.8.2, chapter 4.9.4, chapter 4.10.5.7, and chapter 4.10.5.9 for detailed information.
109
Figure 4-26
4.7 Main Menu
The main menu interface is shown as below. See Figure 4-27.
Figure 4-27
4.8 Operation
4.8.1 Search
Click search button in the main menu, search interface is shown as below. See Figure 4-28.
Usually there are three file types:
 R: Regular recording file.
 A: External alarm recording file.
110

M: Motion detection recording file
Figure 4-28
Please refer to the following sheet for more information.
SN
1
Name
Display
window
2
Search
type
3
Calendar
4
Playback
mode
and
channel
selection
pane.
5
Card
number
search
Function
Here is to display the searched picture or file.
Support 1/4/8-window playback.
Here you can select to search the picture or the recorded file.
You can select to play from the read-write HDD, from peripheral device or from
redundancy HDD.
Before you select to play from the peripheral device, please connect the
corresponding peripheral device. You can view all record files of the root directory
of the peripheral device. Click the Browse button; you can select the file you want
to play.
Important
Redundancy HDD does not support picture backup function, but it
supports picture playback function. You can select to play from redundancy
HDD if there are pictures on the redundancy HDD.
The blue highlighted date means there is picture or file. Otherwise, there is no
picture or file.
In any play mode, click the date you want to see, you can see the corresponding
record file trace in the time bar.
Playback mode:1/4/9. (It may vary due to different series.)
 In 1-window playback mode: you can select 1-16 channels.
 In 4-window playback mode: you can select 4 channels according to your
requirement.
 In 9-window playback mode, you can switch between 1-8 and 9-16 channels.
The time bar will change once you modify the playback mode or the channel
option.
The card number search interface is shown as below. Here you can view card
number/field setup bar. You can implement advanced search.
111
6
Mark file
list button
Click it to go to mark file list interface. You can view all mark information of current
channel by time. Please refer to chapter 4.8.1.3 for detailed information.
Please note only the product of this icon supports mark function.
Double click it, you can view the picture/record file list of current day.
The file list is to display the first channel of the record file.
The system can display max 128 files in one time. Use the │and │ or the
mouse to view the file. Select one item, and then double click the mouse or click
the ENTER button to playback.
You can input the period in the following interface to begin accurate search.
File type:R—regular record; A—external alarm record;M—Motion detect
record.
7
File list
switch
button
Lock file. Click the file you want to lock and click the button
you locked will not be overwritten.
Search locked file: Click the button
8
Playback
control
pane.
to lock. The file
to view the locked file.
Return: Click button
, system goes back to the calendar and channel setup
interface.
Please note:
For the file that is writing or overwriting, it can not be locked.
Play/Pause
There are three ways for you to begin playback.
 The play button
►/
 Double click the valid period of the time bar.
 Double click the item in the file list.
In slow play mode, click it to switch between play/pause.
■
Stop
Backward play
In normal play mode, left click the button, the file begins backward play.

Click it again to pause current play.
In backward play mode, click ►/ to restore normal play.
In playback mode, click it to play the next or the previous section. You can
click continuously when you are watching the files from the same channel.
│/
In normal play mode, when you pause current play, you can click │ and
│
│ to begin frame by frame playback.
In frame by frame playback mode, click ►/ to restore normal playback.
►
Slow play
In playback mode, click it to realize various slow play modes such as slow
play 1, slow play 2, and etc.
Fast forward

In playback mode, click to realize various fast play modes such as fast
play 1,fast play 2 and etc.
Note: The actual play speed has relationship with the software version.
Smart search
The volume of the playback
112
Click the snapshot button in the full-screen mode, the system can snapshot
1 picture.
System supports custom snap picture saved path. Please connect the
peripheral device first, click snap button on the full-screen mode, you can
select or create path. Click Start button, the snapshot picture can be saved
to the specified path.
9
Time bar
10
Time bar
unit
11
Backup
12
Clip
13
Record
type
Mark button.
Please note this function is for some series product only. Please make sure
there is a mark button in the playback control pane.
You can refer to chapter 4.8.1.3 for detailed information.
It is to display the record type and its period in current search criteria.
In 4-window playback mode, there are corresponding four time bars. In other
playback mode, there is only one time bar.
Use the mouse to click one point of the color zone in the time bar, system begins
playback.
The time bar is beginning with 0 o'clock when you are setting the configuration.
The time bar zooms in the period of the current playback time when you are
playing the file.
The green color stands for the regular record file. The red color stands for the
external alarm record file. The yellow stands for the motion detect record file.
●The option includes: 24H, 12H, 1H and 30M. The smaller the unit, the larger the
zoom rate. You can accurately set the time in the time bar to playback the record.
The time bar is beginning with 0 o'clock when you are setting the configuration.
The time bar zooms in the period of the current playback time when you are
playing the file.
 Select the file(s) you want to backup from the file list. You can check from the
list. Then click the backup button, now you can see the backup menu. System
supports customized path setup. After select or create new folder, click the
Start button to begin the backup operation. The record file(s) will be saved in
the specified folder.
 Check the file again you can cancel current selection. System max supports to
display 32 files from one channel.
 After you clip on record file, click Backup button you can save it.
 For one device, if there is a backup in process, you can not start a new
backup operation.
It is to edit the file.
●Please play the file you want to edit and then click this button when you want to
edit. You can see the corresponding slide bars in the time bar of the corresponding
channel. You can adjust the slide bar or input the accurate time to set the file end
time.
After you set, you can click Clip button again to edit the second period. You can
see the slide bar restore its previous position.
Click Backup button after clip, you can save current contents in a new file.
You can clip for one channel or multiple-channel. The multiple-channel click
operation is similar with the one-channel operation.
Please note:
 System max supports 1024 files backup at the same time.
 You can not operate clip operation if there is any file has been checked
in the file list.
In any play mode, the time bar will change once you modify the search type.
Other Functions
14
Smart
search

When system is playing, you can select a zone in the window to begin smart
search. Click the motion detect button to begin play.
113





Once the motion detect play has begun, click button again will terminate
current motion detect file play.
There is no motion detect zone by default.
If you select to play other file in the file list, system switches to motion detect
play of other file.
During the motion detect play process, you can not implement operations such
as change time bar, begin backward playback or frame by frame playback.
Please refer to chapter 4.8.1.1 Smart Search for detailed operation.
15
Other
channel
synchroni
zation
switch to
play
when
playback
When playing the file, click the number button, system can switch to the same
period of the corresponding channel to play.
16
Digital
zoom
When the system is in full-screen playback mode, left click the mouse in the
screen. Drag your mouse in the screen to select a section and then left click
mouse to realize digital zoom. You can right click mouse to exit.
17
Manually
switch
channel
when
playback
During the file playback process, you can switch to other channel via the
dropdown list or rolling the mouse.
This function is null if there is no record file or system is in smart search
process.
4.8.1.1 Smart Search
During the multiple-channel playback mode, double click one channel and then click the
button,
system begins smart search. System supports 396(22*18 PAL) and 330(22*15 NTSC) zones. Please left
click mouse to select smart search zones. See Figure 4-29.
Figure 4-29
Click the
, you can go to the smart search playback. Click it again, system stops smart search
playback.
Important
114


System does not support motion detect zone setup during the full-screen mode.
During the multiple-channel playback, system stops playback of rest channels if you
implement one-channel smart search.
4.8.1.2 Accurate playback by time
Select records from one day, click the list, you can go to the file list interface. You can input time at the
top right corner to search records by time. See image on the left side of the Figure 4-30 For example,
input time 11:00.00 and then click Search button
, you can view all the record files after 11:00.00
(The records includes current time.). See image on the right side of the Figure 4-30 Double click a file
name to playback.
Note
 After you searched files, system implement accurate playback once you click Play for the first
time.
 System does not support accurate playback for picture.
 System supports synchronization playback and non-synchronous playback. The synchronization
playback supports all channels and non-synchronous playback only supports accurately
playback of current select channel.
Figure 4-30
4.8.1.3 Mark Playback
Please make sure your purchased device support this function. You can use this function only if
you can see the mark playback icon on the Search interface (Figure 4-28).
When you are playback record, you can mark the record when there is important information. After
playback, you can use time or the mark key words to search corresponding record and then play. It is
very easy for you to get the important video information.
 Add Mark
When system is playback, click Mark button
, you can go to the following interface. See Figure 4-31.
115
Figure 4-31

Playback Mark
During 1-window playback mode, click mark file list button
in Figure 4-28, you can go to mark file list
interface. Double click one mark file, you can begin playback from the mark time.
 Play before mark time
Here you can set to begin playback from previous N seconds of the mark time.
Note
Usually, system can playbacks previous N seconds record if there is such kind of record file. Otherwise,
system playbacks from the previous X seconds when there is such as kind of record.

Mark Manager
Click the mark manager button
on the Search interface (Figure 4-28); you can go to Mark
Manager interface. See Figure 4-32. System can manage all the record mark information of current
channel by default. You can view all mark information of current channel by time.
Figure 4-32
 Modify
Double click one mark information item, you can see system pops up a dialogue box for you to change
mark information. You can only change mark name here.
 Delete
Here you can check the mark information item you want to delete and then click Delete button, you can
remove one mark item. .
Note
 After you go to the mark management interface, system needs to pause current playback. System
resume playback after you exit mark management interface.
 If the mark file you want to playback has been removed, system begin playbacking from the first file
in the list.
116
4.8.2 Backup
DVR support CD-RW, DVD burner, USB device backup, network download and eSATA. Here we
introduce USB, eSATA backup. You can refer to Chapter 5 Web Operation for network download
backup operation.
Click backup button, you can see an interface is shown as in Figure 4-33. Here is for you to view
devices information.
You can view backup device name and its total space and free space. The device includes CD-RW,
DVD burner, USB device, flash disk, eSATA backup.
Figure 4-33
Select backup device and then set channel, file start time and end time.
Click add button, system begins search. All matched files are listed below. System automatically
calculates the capacity needed and remained. See Figure 4-35.
117
Figure 4-34
System only backup files with a √ before channel name. You can use Fn or cancel button to delete
√ after file serial number.
Click Start button, system begins copy. At the same time, the backup button becomes stop button.
You can view the remaining time and process bar at the left bottom. See Figure 4-35.
Figure 4-35
When the system completes backup, you can see a dialogue box prompting successful backup.
 File format: Click the file format; you can see there are two options: DAV/ASF.
118
The file name format usually is: Channel number+Record type+Time. In the file name, the YDM
format is Y+M+D+H+M+S. File extension name is .dav.
Tips:
During backup process, you can click ESC to exit current interface for other operation. The system
will not terminate backup process.
Note:
When you click stop button during the burning process, the stop function becomes activated
immediately. For example, if there are ten files, when you click stop system just backup five files,
system only save the previous 5 files in the device (But you can view ten file names).
4.8.3 Shut Down
In Figure 4-27, select Shut Down, you can go to the following interface. See Figure 4-36.
There are three options: Shutdown/logout/reboot. See Figure 4-36.
For the user who does not have the shut down right, please input corresponding password to shut down.
Figure 4-36
4.9 Information
It is for you to view system info, event info, and network info and log info.
4.9.1 System Info
Here is for you to view system information. There are total four items: HDD (hard disk information),
record, BPS (data stream statistics), version. See Figure 4-37.
119
Figure 4-37
4.9.1.1 HDD Information
Here is to list hard disk type, total space, free space, video start time and status. See Figure 4-38.
 SATA: 1 here means system max supports 1 HDD. ○ means current HDD is normal. X means there
is error. - means there is no HDD. If disk is damaged, system shows as “?”. Please remove the
broken hard disk before you add a new one.

SN: You can view the HDD amount the device connected to. ﹡ means the second HDD is current
working HDD.

Type: The corresponding HDD properties.

Total space: The HDD total capacity.

Free space: The HDD free capacity.

Status: HDD can work properly or not.

SMART: Display HDD information. See Figure 4-38.
120
Figure 4-38
Double click one HDD information; you can see the HDD SMART information. See Figure 4-39.
Figure 4-39
4.9.1.2 Record Info
It is to view record start time and end time. See Figure 4-40.
121
Figure 4-40
4.9.1.3 BPS
Here is for you to view current video data stream (KB/s), resolution and etc. See Figure 4-41.
Figure 4-41
4.9.1.4 Version
Here is for you to view some version information such as version number, built date, serial number and
etc. See Figure 4-42.
122
Figure 4-42
4.9.2 Event
It is to display device status and channel status. See Figure 4-43.
Figure 4-43
4.9.3 Network
4.9.3.1 Online Users
Here is for you to manage online users. See Figure 4-44.
You can disconnect one user or block one user if you have proper system right. Max disconnection
setup is 65535 seconds.
123
System detects there is any newly added or deleted user in each five seconds and refresh the list
automatically.
Figure 4-44
4.9.3.2 Network Load
Network load is shown as in Figure 4-45. Here you can view the follow statistics of the device network
adapter.
Here you can view information of all connected network adapters. The connection status is shown as
offline if connection is disconnected. Click one network adapter, you can view the flow statistics such as
send rate and receive rate at the top panel.
Figure 4-45
4.9.3.3 Network Test
124
Network test interface is shown as in Figure 4-46.
 Destination IP: Please input valid IPV4 address or domain name.
 Test: Click it to test the connection with the destination IP address. The test results can display
average delay and packet loss rate and you can also view the network status as OK, bad, no
connection and etc.
 Network Sniffer backup: Please insert USB2.0 device and click the Refresh button, you can view the
device on the following column. You can use the dropdown list to select peripheral device. Click
Browse button to select the snap path. The steps here are same as preview backup operation.
You can view all connected network adapter names (including Ethernet, PPPoE, WIFI, and 3G), you can
click the button
on the right panel to begin Sniffer. Click the grey stop button to stop. Please note
system can not Sniffer several network adapters at the same time.
After Sniffer began, you can exit to implement corresponding network operation such as login WEB,
monitor. Please go back to Sniffer interface to click
stop Sniffer. System can save the packets to the
specified path. The file is named after “Network adapter name+time”. You can use software such as
Wireshark to open the packets on the PC for the professional engineer to solve complicated problems.
Figure 4-46
4.9.4 Log
Here is for you to view system log file. System lists the following information. See Figure 4-47.
Log types include system operation, configuration operation, data management, alarm event, record
operation, account manager, log clear, file operation and etc. It optimized reboot log. There are only
three types: normal reboot, abnormal reboot and protection reboot. 0x02、0x03、0x04 is included in the
protection reboot type.
125



Start time/end time: Pleased select start time and end time, then click search button. You can view
the log files in a list. System max displays 100 logs in one page. It can max save 1024 log files.
Please use page up/down button on the interface or the front panel to view more.
Backup: Please select a folder you want to save; you can click the backup button to save the log
files. After the backup, you can see there is a folder named Log_time on the backup path. Double
click the folder, you can see the log file
Details: Click the Details button or double click the log item, you can view the detailed information.
See Figure 4-48. Here you can use rolling bar to view information, or you can use Page up/Page
down to view other log information.
Figure 4-47
Select an item on the list and then click the Details button or double click the log item, you can view the
detailed information such as log time, log type, log user, IP address and etc. See Figure 4-48.
126
Figure 4-48
4.10 Setting
It is for you to set camera, network, event, storage, system and etc.
4.10.1 Camera
Here you can set audio/video property, camera property and channel name, channel type.
4.10.1.1 Remote Device (For digital channel only)
Note
You can see this interface after you set IP channel in chapter 4.10.1.3.5. System supports ONVIF
standard protocol.
4.10.1.1.1 Remote Device
In the main menu, from Camera ->Remote, you can go to an interface shown as in Figure 4-49. Here
you can add/delete remote device and view its corresponding information.
 IP search: Click it to search IP address. It includes device IP address, port, device name,
manufacturer, type. Use your mouse to click the item name, you can refresh display order. Click IP
address, system displays IP address from small to large. Click IP address again, you can see icon,
system displays IP address from large to small. You can click other items to view information
conveniently.
 Add: Click it to connect to the selected device and add it to the Added device list. Support Batch add.
You can see the corresponding dialogue box if all digital-channel has connected to the front-end.
System can not add new device if the device you want to add has the same IP and TCP port as
the device in the list.
 Show filter: You can use it to display the specified devices from the added device.

Edit: Click button
or double click a device in the list, you can change channel setup.

Delete: Please select one device in the Added device list and then click

Status:
means connection is OK and
to remove.
means connection failed.
127


Delete;Select a device on the Added device list, click Delete button, system disconnect device first
and then remove its name from the list.
Manual add: Click it to add the IPC manually. The port number is 37777. The default user name is
admin and password is admin.
Figure 4-49
Click the Manual Add button; you can go to the following interface. See Figure 4-50.
Channel number:The dropdown list here displays unconnected channel number. You can go to Figure
4-49 to set remote channel connection.
Please note:



This series product supports the IPC from many popular manufactures such as Sony, Hitachi, Axis,
Samsung, Dynacolor, Arecont, Onvif and Dahua.
System default IP address is 192.168.0.0 if you do not input IP address. System will not add current
IP address.
You can not add two or more devices in the Manual Add interface (Figure 4-50). Click OKbutton,
system connects to the corresponding front-end device of current channel on the interface.
Figure 4-50
128
4.10.1.1.2 Channel Status
Here you can view the IPC status of the corresponding channel such as motion detect, video loss,
tampering, alarm and etc. See Figure 4-51.

IPC status:
: Front-end does not support.
: Front-end supports.
: There is alarm
event from current front-end.

Connection status:
: Connection succeeded.
: Connection failed.

Refresh: Click it to get latest front-end channel status.
Figure 4-51
4.10.1.1.3 Firmware
It is to view channel, IP address, manufacturer, type, system version, SN, video in put, audio input,
and etc. See Figure 4-52.
Figure 4-52
129
4.10.1.1.4 Remote Upgrade
It is to update the camera.
From main menu->setting->camera->remote, the interface is shown as below. See Figure 4-53.
Click Browse button and then select the upgrade file. Then select a channel (or you can select device
type filter to select several devices at the same time.)
Click Start upgrade button to update. You can see the corresponding dialogue once the upgrade is finish.
Figure 4-53
4.10.1.2 Camera
For analog channel, the camera interface is shown as in Figure 4-54. For digital channel, the
camera interface is shown as in Figure 4-55.
 Channel: Select a channel from the dropdown list.
 Saturation: It is to adjust monitor window saturation. The value ranges from 0 to 100. The default
value is 50. The larger the number, the strong the color is. This value has no effect on the general
brightness of the whole video. The video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white balance is not accurate. Please note
the video may not be attractive if the value is too low. The recommended value ranges from 40 to 60.
 Brightness: It is to adjust monitor window bright. The value ranges from 0 to 100. The default value
is 50. The larger the number is, the bright the video is. When you input the value here, the bright
section and the dark section of the video will be adjusted accordingly. You can use this function
when the whole video is too dark or too bright. Please note the video may become hazy if the value
is too high. The recommended value ranges from 40 to 60.
 Contrast: It is to adjust monitor window contrast. The value ranges from 0 to 100. The default value
is 50. The larger the number is, the higher the contrast is. You can use this function when the whole
video bright is OK but the contrast is not proper. Please note the video may become hazy if the
value is too low. If this value is too high, the dark section may lack brightness while the bright
section may over exposure .The recommended value ranges from 40 to 60.
130





















Sharpness: The value here is to adjust the edge of the video. The value ranges from 0 to 100. The
larger the value is, the clear the edge is and vice versa. Please note there is noise if the val ue here
is too high. The default value is 50 and the recommended value ranges from 40 to 60.
Mirror: It is to switch video up and bottom limit. This function is disabled by default.
Flip: It is to switch video left and right limit. This function is disabled by default.
BLC:It includes several options: BLC/WDR/HLC/OFF.
BLC: The device auto exposures according to the environments situation so that the darkest area of
the video is cleared
WDR: For the WDR scene, this function can lower the high bright section and enhance the
brightness of the low bright section. So that you can view these two sections clearly at the same
time. The value ranges from 1 to 100. When you switch the camera from no-WDR mode to the WDR
mode, system may lose several seconds record video.
HLC: After you enabled HLC function, the device can lower the brightness of the brightest section
according to the HLC control level. It can reduce the area of the halo and lower the brightness of the
whole video.
OFF: It is to disable the BLC function. Please note this function is disabled by default.
Profile: It is to set the white balance mode. It has effect on the general hue of the video. This
function is on by default. You can select the different scene mode such as auto, sunny, cloudy,
home, office, night, disable and etc to adjust the video to the best quality.
Auto: The auto white balance is on. System can auto compensate the color temperature to make
sure the vide color is proper.
Sunny: The threshold of the white balance is in the sunny mode.
Night: The threshold of the white balance is in the night mode.
Customized: You can set the gain of the red/blue channel. The value reneges from 0 to 100.
Day/night. It is to set device color and the B/W mode switch. The default setup is auto.
Color: Device outputs the color video.
Auto: Device auto select to output the color or the B/W video according to the device feature (The
general bright of the video or there is IR light or not.)
B/W: The device outputs the black and white video.
Sensor: It is to set when there is peripheral connected IR light.
Image enhancement: It is to enhance video quality. The larger the value is, the clearer the video is.
But the noise may become large too.
2D NR: It is to process the noise of the single image. The video may become soft after process. The
larger the value is, the better the effect is.
3D NR: it is to process the multiple-frame (at least two frames). It is to use the frame information
between the following two frames to reduce noise. The larger the value is, the better the effect is.
131
Figure 4-54
Figure 4-55
4.10.1.3 Encode
It is to set video bit stream, picture bit stream, video overlay parameter and etc.
4.10.1.3.1 Video
Video setting includes the following items. See Figure 4-56.
 Channel: Select the channel you want.
 Type: Please select from the dropdown list. There are three options: regular/motion detect/alarm.
You can set the various encode parameters for different record types.
 Compression: System supports H.264 and MJPEG.
132







Resolution: System supports various resolutions, you can select from the dropdown list. Please note
the option may vary due to different series.
Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.
Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality.
Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image quality.
Video/audio: You can enable or disable the video/audio.
Audio format: Please select from the dropdown list. There are three options: G711a/G711u/PCM
Audio source: Please select from the dropdown list. There are two options: normal/HDCVI. For
normal mode, the audio signal is from the Audio In port. For HDCVI mode, the audio signal is from
the coaxial cable of the camera.
Figure 4-56
4.10.1.3.2 Snapshot
Here you can set snapshot mode, picture size, quality and frequency. See Figure 4-57.
 Snapshot mode: There are two modes: regular and trigger. If you set timing mode, you need to set
snapshot frequency. If you set trigger snapshot, you need to set snapshot activation operation.
 Image size: Here you can set snapshot picture size.
 Image quality: Here you can set snapshot quality. The value ranges from 1 to 6.
 Interval: It is for you to set timing (schedule) snapshot interval.
133
Figure 4-57
4.10.1.3.3 Overlay
Overlay interface is shown as in Figure 4-58.
 Cover area: Here is for you to set cover area. You can drag you mouse to set proper section size.
Or you can use the direction buttons and Fn button on the front panel to set the zone size too. In
one channel video, system max supports 4 zones in one channel.
 Preview/monitor: privacy mask has two types. Preview and Monitor. Preview means the privacy
mask zone can not be viewed by user when system is in preview status. Monitor means the privacy
mask zone can not be view by the user when system is in monitor status.
 Time display: You can select system displays time or not when you playback. Please click set
button and then drag the title to the corresponding position in the screen.
 Channel display: You can select system displays channel number or not when you playback. Please
click set button and then drag the title to the corresponding position in the screen.
 Copy:After you complete the setup, you can click Copy button to copy current setup to other
channel(s). You can see an interface is shown as in Figure 4-59. You can see current channel
number is grey. Please check the number to select the channel or you can check the box ALL.
Please click the OK button in Figure 4-59 and Figure 4-58 respectively to complete the setup.
Please highlight icon
to select the corresponding function.
134
Figure 4-58
Figure 4-59
4.10.1.3.4 Channel Name
It is to modify channel name. It max supports 31-character. See Figure 4-60.
135
Figure 4-60
4.10.1.3.5 Channel Type
It is to set channel type. It supports coaxial/UTP/IP. See Figure 4-61.
Figure 4-61
4.10.2 Network
4.10.2.1 TCP/IP
The interface is shown as in Figure 4-62
136
IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP address
format and you can access via them.
 MAC address: The host in the LAN can get a unique MAC address. It is for you to access in the LAN. It
is read-only.
 IP address: Here you can use up/down button () or input the corresponding number to input IP
address. Then you can set the corresponding subnet mask the default gateway.
 Default gateway: Here you can input the default gateway. Please note system needs to check the
validity of all IPv6 addresses. The IP address and the default gateway shall be in the same IP
section. That is to say, the specified length of the subnet prefix shall have the same string.
 DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet mask
/Gateway. These values are from DHCP function. If you have not enabled DHCP function,
IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to view current IP
information. Besides, when PPPoE is operating, you can not modify IP/Subnet mask /Gateway.
 MTU: It is to set MTU value of the network adapter. The value ranges from 1280-7200 bytes. The
default setup is 1500 bytes. Please note MTU modification may result in network adapter reboot and
network becomes off. That is to say, MTU modification can affect current network service. System
may pop up dialog box for you to confirm setup when you want to change MTU setup. Click OK
button to confirm current reboot, or you can click Cancel button to terminate current modification.
Before the modification, you can check the MTU of the gateway; the MTU of the DVR shall be the
same as or is lower than the MTU of the gateway. In this way, you can reduce packets and enhance
network transmission efficiency.
The following MTU value is for reference only.
 1500: Ethernet information packet max value and it is also the defaul t value. It is the typical
setup when there is no PPPoE or VPN. It is the default setup of some router, switch or the
network adapter.
 1492: Recommend value for PPPoE.
 1468: Recommend value for DHCP.
 Preferred DNS server: DNS server IP address.
 Alternate DNS server: DNS server alternate address.
 Transfer mode: Here you can select the priority between fluency/video qualities.
 LAN download: System can process the downloaded data first if you enable this function. The
download speed is 1.5X or 2.0X of the normal speed.
 LAN download: System can process the downloaded data first if you enable this function. The
download speed is 1.5X or 2.0X of the normal speed.
After completing all the setups please click save button, system goes back to the previous menu.

137
Figure 4-62
4.10.2.2 Connection
The connection setup interface is shown as in Figure 4-63.
 Max connection: system support maximal 128 users. 0 means there is no connection lim it.
 TCP port: Default value is 37777.
 UDP port: Default value is 37778.
 HTTP port: Default value is 80.
 HTTPS port: Default value is 443.
 RTSP port: Default value is 554.
Important: System needs to reboot after you changed and saved any setup of the abo ve four
ports. Please make sure the port values here do not conflict.
138
Figure 4-63
4.10.2.3 WIFI
The WIFI interface is shown as below. See Figure 4-64.
 Auto connect WIFI: Check the box here, system automatically connects to the previous WIFI
hotspot.
 Refresh: You can click it to search the hotspot list again. It can automatically add the information
such as the password if you have set it before.
 Disconnect: Here you can click it to turn off the connection.
 Connect: Here you can click it to connect to the hotspot. System needs to turn off current
connection and then connect to a new hotspot if there is connection of you selected one.
Figure 4-64
139
 WIFI working status: Here you can view current connection status.
Please note:
 After successful connection, you can see WIFI connection icon at the top right corner of the preview
interface.
 When the hotspot verification type is WEP, system displays as AUTO since the device can not
detect its encryption type.
 System does not support verification type WPA and WPA2. The display may become abnormal for
the verification type and encryption type.
After device successfully connected to the WIFI, you can view the hotspot name, IP address, subnet
mask, default gateway and etc.
4.10.2.4 3G
3G setup interface is shown as below. See Figure 4-65.
Please refer to the following contents for the parameter information.
 Pane 1: Display 3G signal intensity after you enabled 3G function.
 Pane 2: Display 3G module configuration information after you enabled 3G function.
 Pane 3: Display 3G module status information after you enabled 3G function.
It is to display current wireless network signal intensity such as EVDO, CDMA1x, WCDMA, WCDMA,
EDGE and etc.
 3G module: It is to display current wireless network adapter name.
 3G Enable/Disable: Check the box here to enable 3G module.
 Network type: There are various network types for different 3G network modules. You can select
according to your requirements.
 APN: It is the wireless connection server. It is to set you access the wireless network via which
method.
 AUTH: It is the authentication mode. It supports PAP/CHAP.
 Dial number: Please input 3G network dialup number you got from your ISP.
 User name: It is the user name for you to login the 3G network.
 Password: It is the password for you to login the 3G network.
 Pulse interval: You can set dialup duration. Once you disable the extra stream, the connection time
begins. For example, if you input 5 seconds here, then 3G network connection period is 5 seconds.
The device automatically disconnect when time is up. If there is no extra stream, 3G network
connection is valid all the time. If the alive time is 0, then the 3G network connection is valid all
the time.
 Dial: Here you can enable or disable 3G network connection/disconnection manually.
 3G wireless network: Here is to display wireless network status, SIM card status, dial status. If the
3G connection is OK, then you can see the device IP address the wireless network automatically
allocates.
140
1
2
3
Figure 4-65
4.10.2.5 PPPoE
PPPoE interface is shown as in Figure 4-66.
Input “PPPoE name” and “PPPoE password” you get from your ISP (Internet service provider).
Click save button, you need to restart to activate your configuration.
After rebooting, DVR will connect to internet automatically. The IP in the PPPoE is the DVR dynamic
value. You can access this IP to visit the unit.
Figure 4-66
4.10.2.6 DDNS Setup
141
DDNS setup interface is shown as in Figure 4-67.
You need a PC of fixed IP in the internet and there is the DDNS software running in this PC. In other
words, this PC is a DNS (domain name server).
In network DDNS, please select DDNS type and highlight enable item. Then please input your PPPoE
name you get from you IPS and server IP (PC with DDNS). Click save button and then reboot system.
Click save button, system prompts for rebooting to get all setup activated.
After rebooting, open IE and input as below:
http://(DDNS server IP)/(virtual directory name)/webtest.htm
e.g.: http://10.6.2.85/DVR _DDNS/webtest.htm.)
Now you can open DDNSServer web search page.
Figure 4-67
Please note DDNS type includes: CN99 DDNS, NO-IP DDNS, Quick DDNS, Dyndns DDNS and sysdns
DDNS. All the DDNS can be valid at the same time, you can select as you requirement.
Private DDNS function shall work with special DDNS server and special Professional Surveillance
Software (PSS).
Quick DDNS and Client-end Introduction
1) Background Introduction
Device IP is not fixed if you use ADSL to login the network. The DDNS function allows you to access the
DVR via the registered domain name. Besides the general DDNS ,the Quick DDNS works with the
device from the manufacturer so that it can add the extension function.
2) Function Introduction
The quick DDNS client has the same function as other DDNS client end. It realizes the bonding of the
domain name and the IP address. Right now, current DDNS server is for our own devices only. You
need to refresh the bonding relationship of the domain and the IP regularly. There is no user name,
password or the ID registration on the server. At the same time, each device has a default domain name
(Generated by MAC address) for your option. You can also use customized valid domain name (has not
registered.).
142
3) Operation
Before you use Quick DDNS, you need to enable this service and set proper server address, port value
and domain name.

Server address:www.quickddns.com

Port number:80

Domain name:There are two modes: Default domain name and customized domain name.
Except default domain name registration, you can also use customized domain name (You can input
your self-defined domain name.) After successful registration, you can use domain name to login
installed of the device IP.

User name: It is optional. You can input your commonly used email address.
Important
 Do not register frequently. The interval between two registrations shall be more than 60 seconds.
Too many registration requests may result in server attack.
 System may take back the domain name that is idle for one year. You can get a notification email
before the cancel operation if your email address setup is OK.
4.10.2.7 IP Filter
IP filter interface is shown as in Figure 4-68. You can add IP in the following list. The list supports max
64 IP addresses. System supports valid address of IPv4 and IPv6. Please note system needs to
check the validity of all IPv6 addresses and implement optimization.
After you enabled trusted sites function, only the IP listed below can access current DVR.
If you enable blocked sites function, the following listed IP addresses can not access current DVR.
 Enable: Highlight the box here, you can check the trusted site function and blocked sites function.
You can not see these two modes if the Enable button is grey.
 Type: You can select trusted site and blacklist from the dropdown list. You can view the IP address
on the following column.
 Start address/end address: Select one type from the dropdown list, you can input IP address in the
start address and end address. Now you can click Add IP address or Add IP section to add.
a) For the newly added IP address, it is in enable status by default. Remove the √ before the item,
and then current item is not in the list.
b) System max supports 64 items.
c) Address column supports IPv4 or IPv6 format. If it is IPv6 address, system can optimize it. For
example, system can optimize aa:0000: 00: 00aa: 00aa: 00aa: 00aa: 00aa as aa:: aa: aa: aa:
aa: aa: aa.
d) System automatically removes space if there is any space before or after the newly added IP
address.
e) System only checks start address if you add IP address. System check start address and end
address if you add IP section and the end address shall be larger than the start address.
f) System may check newly added IP address exists or not. System does not add if input IP
address does not exist.
 Delete: Click it to remove specified item.
 Edit: Click it to edit start address and end address. See Figure 4-69. System can check the IP
address validity after the edit operation and implement IPv6 optimization.
 Default: Click it to restore default setup. In this case, the trusted sites and blocked sites are both
null.
143
Note:
 If you enabled trusted sites, only the IP in the trusted sites list can access the device.
 If you enabled blocked sites, the IP in the blocked sites can not access the device.
 System supports add MAC address.
Figure 4-68
Figure 4-69
4.10.2.8 Email
The email interface is shown as below. See Figure 4-70.
 SMTP server: Please input your email SMTP server IP here.
 Port: Please input corresponding port value here.
 User name: Please input the user name to login the sender email box.
 Password: Please input the corresponding password here.
 Sender: Please input sender email box here.
 Title: Please input email subject here. System support English character and Arabic number. Max
32-digit.
 Receiver: Please input receiver email address here. System max supports 3 email boxes. System
automatically filters same addresses if you input one receiver repeatedly.
144
SSL enable: System supports SSL encryption box.
Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval.
Health email enable: Please check the box here to enable this function. This function allows the
system to send out the test email to check the connection is OK or not.
 Interval: Please check the above box to enable this function and then set the corresponding interval.
System can send out the email regularly as you set here. Click the Test button, you can see the
corresponding dialogue box to see the email connection is OK or not.
Please note system will not send out the email immediately when the alarm occurs. When the alarm,
motion detection or the abnormity event activates the email, system sends out the email according to the
interval you specified here. This function is very useful when there are too many emails activated by the
abnormity events, which may result in heavy load for the email server.



Figure 4-70
4.10.2.9 FTP
You need to download or buy FTP service tool (such as Ser-U FTP SERVER) to establish FTP service.
Please install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server -> Serv-U
Administrator. Now you can set user password and FTP folder. Please note you need to grant write right
to FTP upload user. See Figure 4-71.
145
Figure 4-71
You can use a PC or FTP login tool to test setup is right or not.
For example, you can login user ZHY to H140H140H140HTUFTP://10.10.7.7UTH and then test it can
modify or delete folder or not. See Figure 4-72.
Figure 4-72
System also supports upload multiple DVRs to one FTP server. You can create multiple folders under
this FTP.
FTP interface is shown as in Figure 4-73.
Please highlight the icon
in front of Enable to activate FTP function.
Here you can input FTP server address, port and remote directory. When remote directory is null,
system automatically create folders according to the IP, time and channel.
User name and password is the account information for you to login the FTP.
File length is upload file length. When setup is larger than the actual file length, system will upload the
whole file. When setup here is smaller than the actual file length, system only uploads the set length and
auto ignore the left section. When interval value is 0, system uploads all corresponding files.
After completed channel and weekday setup, you can set two periods for one each channel.
Click the Test button, you can see the corresponding dialogue box to see the FTP connection is OK or
not.
146
Figure 4-73
4.10.2.10 UPnP
The UPNP protocol is to establish a mapping relationship between the LAN and the WAN. Please input
the router IP address in the LAN in Figure 4-62. See Figure 4-74.
 UPNP on/off :Turn on or off the UPNP function of the device.
 Status: When the UPNP is offline, it shows as “Unknown”. When the UPNP works it shows
“Success”
 Router LAN IP: It is the router IP in the LAN.
 WAN IP: It is the router IP in the WAN.
 Port Mapping list: The port mapping list here is the one to one relationship with the router’s port
mapping setting.
 List:

Service name:Defined by user.

Protocol: Protocol type

Internal port:Port that has been mapped in the router.
 External port:Port that has been mapped locally.
 Default: UPNP default port setting is the HTTP, TCP and UDP of the DVR.
 Add to the list: Click it to add the mapping relationship.
 Delete: Click it to remove one mapping item.
Double click one item; you can change the corresponding mapping information. See Figure 4-75.
Important:
When you are setting the router external port, please use 1024~5000 port. Do not use well-known
port 1~255 and the system port 256~1023 to avoid conflict.
For the TCP and UDP, please make sure the internal port and external port are the same to
guarantee the proper data transmission.
147
Figure 4-74
Figure 4-75
4.10.2.11 SNMP
SNMP is an abbreviation of Simple Network Management Protocol. It provides the basic network
management frame of the network management system. The SNMP widely used in many environments.
It is used in many network device, software and system.
You can set in the following interface. See Figure 4-76.
148
Figure 4-76
Please enable the SNMP function. Use the corresponding software tool (MIB Builder and MG-SOFT MIB
Browser. You still need two MIB file: BASE-SNMP-MIB, DVR-SNMP-MIB) to connect to the device. You
can get the device corresponding configuration information after successfully connection.
Please follow the steps listed below to configure.
 In Figure 4-76, check the box to enable the SNMP function. Input the IP address of the PC than is
running the software in the Trap address. You can use default setup for the rest items.
 Compile the above mentioned two MIB file via the software MIB Builder.
 Run MG-SOFT MIB Browser to load the file from the previous step to the software.
 Input the device IP you want to manage in the MG-SOFT MIB Browser. Please set the
corresponding version for your future reference.
 Open the tree list on the MG-SOFT MIB Browser; you can get the device configuration. Here you
can see the device has how many video channels, audio channels, application version and etc.
Note
Port conflict occurs when SNMP port and Trap port are the same.
4.10.2.12 Multicast
Multicast setup interface is shown as in Figure 4-77.
149
Figure 4-77
Here you can set a multiple cast group. Please refer to the following sheet for detailed information.
 IP multiple cast group address
-224.0.0.0-239.255.255.255
-“D” address space
 The higher four-bit of the first byte=”1110”
 Reserved local multiple cast group address
-224.0.0.0-224.0.0.255
-TTL=1 When sending out telegraph
-For example
224.0.0.1 All systems in the sub-net
224.0.0.2 All routers in the sub-net
224.0.0.4 DVMRP router
224.0.0.5 OSPF router
224.0.0.13 PIMv2 router
 Administrative scoped addressees
-239.0.0.0-239.255.255.255
-Private address space
 Like the single broadcast address of RFC1918
 Can not be used in Internet transmission
 Used for multiple cast broadcast in limited space.
Except the above mentioned addresses of special meaning, you can use other addresses. For example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
After you logged in the Web, the Web can automatically get multiple cast address and add it to the
multiple cast groups. You can enable real-time monitor function to view the view.
150
Please note multiple cast function applies to special series only.
4.10.2.13 Register
This function allows the device to auto register to the proxy you specified. In this way, you can use the
client-end to access the DVR and etc via the proxy. Here the proxy has a switch function. In the network
service, device supports the server address of IPv4 or domain.
Please follow the steps listed below to use this function.
Please set proxy server address, port, and sub-device name at the device-end. Please enable the auto
register function, the device can auto register to the proxy server.
1) The setup interface is shown as in Figure 4-78.
Important
Do not input network default port such as TCP port number.
Figure 4-78
2) The proxy server software developed from the SDK. Please open the software and input the global
setup. Please make sure the auto connection port here is the same as the port you set in the previous
step.
3) Now you can add device. Please do not input default port number such as the TCP port in the
mapping port number. The device ID here shall be the same with the ID you input in Figure 4-78. Click
Add button to complete the setup.
4) Now you can boot up the proxy server. When you see the network status is Y, it means your
registration is OK. You can view the proxy server when the device is online.
Important
The server IP address can also be domain. But you need to register a domain name before you run
proxy device server.
4.10.2.14 Alarm Centre
This interface is reserved for you to develop. See Figure 4-79.
151
Figure 4-79
4.10.2.15 P2P
The P2P interface is shown as in Figure 4-80.
You can use you cell phone to scan the QR to add the device via the client on the cell phone. For
detailed information, please refer to the P2P operation manual included in the resources CD.
Figure 4-80
4.10.3 Event
4.10.3.1 Detect
152
In the main menu, from Setting->Event->Detect, you can see motion detect interface. See Figure
4-81.There is three detection types: motion detection, video loss, tampering.
 The video loss has no detection region and sensitivity setup and tampering has no detection
region setup.
 You can see motion detect icon if current channel has enabled motion detect alarm.
 You can drag you mouse to set motion detect region. Please click OK button to save current
region setup. Right click mouse to exit current interface.
 For digital channel, the detect function refers to support detection function of the front -end and
support local activation function. The front-end can get enable/disable status, sensitivity and
region setup. You can get corresponding prompt if front-end can not get the above information.
You can change front-end setup if it can get.
4.10.3.1.1 Motion Detect
After analysis video, system can generate a video loss alarm when the detected moving signal reached
the sensitivity you set here.
Detection menu is shown as below. See Figure 4-81.
 Event type: From the dropdown list you can select motion detection type.
 Channel: Select a channel from the dropdown list to set motion detect function.
 Enable: Check the box here to enable motion detect function.
 Region: Click select button, the interface is shown as in Figure 4-82. Here you can set motion
detection zone. There are four zones for you to set. Please select a zone first and then left drag the
mouse to select a zone. The corresponding color zone displays different detection zone. You can
click Fn button to switch between the arm mode and disarm mode. In arm mode, you can click the
direction buttons to move the green rectangle to set the motion detection zone. After you completed
the setup, please click ENTER button to exit current setup. Do remember click save button to save
current setup. If you click ESC button to exit the region setup interface system will not save your
zone setup.
 Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.
 Anti-dither: Here you can set anti-dither time. The value ranges from 5 to 600s. The anti-dither time
refers to the alarm signal lasts time. It can be seem as the alarm signal activati on stays such as the
buzzer, tour, PTZ activation, snapshot, channel record. The stay time here does not include the
latch time. During the alarm process, the alarm signal can begin an anti-dither time if system detects
the local alarm again. The screen prompt, alarm upload, email and etc will not be activated. For
example, if you set the anti-dither time as 10 second, you can see the each activation may last 10s
if the local alarm is activated. During the process, if system detects another local alarm sign al at the
fifth second, the buzzer, tour, PTZ activation, snapshot, record channel will begin another 10s
while the screen prompt, alarm upload, email will not be activated again. After 10s, if system detects
another alarm signal, it can generate an alarm since the anti-dither time is out.
 Period: Click set button, you can see an interface is shown as in Figure 4-84. Here you can set
motion detect period. System only enables motion detect operation in the specified periods. It is not
for video loss or the tampering. There are two ways for you to set periods. Please note system only
supports 6 periods in one day.

In Figure 4-84, Select icon
the icon is shown as
. Click
of several dates, all checked items can be edited together. Now
to delete a record type from one period.
153

In Figure 4-84. Click button
after one date or a holiday, you can see an interface shown as in
Figure 4-85. There are four record types: regular, motion detection (MD), Alarm, MD & alarm.



Alarm output: when an alarm occurs, system enables peripheral alarm devices.
Latch: when motion detection complete, system auto delays detecting for a specified time. The
value ranges from 1-300(Unit: second)
Show message: System can pop up a message to alarm you in the local host screen if you enabled
this function.

Alarm upload: System can upload the alarm signal to the network (including alarm
centre) if you enabled current function.


Send email: System can send out email to alert you when an alarm occurs.
Record channel: System auto activates motion detection channel(s) to record once an alarm occurs.
Please make sure you have set MD record in Schedule interface(Main Menu->Setting->Schedule)
and schedule record in manual record interface(Main Menu->Advanced->Manual Record)
PTZ activation: Here you can set PTZ movement when an alarm occurs. Such as go to preset, tour
&pattern when there is an alarm. Click “select” button, you can see an interface is shown as in
Figure 4-83 .
Record Delay: System can delay the record for specified time after alarm ended. The value ranges
from 10s to 300s.
Tour: Here you can enable tour function when alarm occurs. System one-window tour.

X





Snapshot: You can enable this function to snapshoot image when a motion detect alarm occurs.
Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs.
Test: Click it to test current motion detect setup (do not need to save). Click Select button after
Region, you can set motion detect area.
Please highlight icon
to select the corresponding function. After all the setups please click save
button, system goes back to the previous menu.
Note:
In motion detection mode, you can not use copy/paste to set channel setup since the video in each
channel may not be the same.
In Figure 4-82, you can left click mouse and then drag it to set a region for motion de tection. Click Fn to
switch between arm/withdraw motion detection. After setting, click enter button to exit.
154
Figure 4-81
Figure 4-82
Figure 4-83
155
Figure 4-84
Figure 4-85
Motion detect here only has relationship with the sensitivity and region setup. It has no relationship
with other setups.
4.10.3.1.2 Video Loss
In Figure 4-81, select video loss from the type list. You can see the interface is shown as in Figure
4-86.This function allows you to be informed when video loss phenomenon occurred. You can
enable alarm output channel and then enable show message function.
Tips:
You can enable preset/tour/pattern activation operation when video loss occurs.
Please refer to chapter 4.10.3.1.1 motion detection for detailed information.
156
Figure 4-86
4.10.3.1.3 Tampering
When someone viciously masks the lens, or the output video is in one-color due to the environments
light change, the system can alert you to guarantee video continuity. Tampering interface is shown
as in Figure 4-87. You can enable “Alarm output “or “Show message” function when tampering
alarm occurs.
 Sensitivity: The value ranges from 1 to 6. It mainly concerns the brightness. The level 6 has the
higher sensitivity than level 1. The default setup is 3.
Tips:
You can enable preset/tour/pattern activation operation when video loss occurs.
Please refer to chapter 4.10.3.1.1 motion detection for detailed information.
Note:
 In Detect interface, copy/paste function is only valid for the same type, which means you can
not copy a channel setup in video loss mode to tampering mode.
 About Default function. Since detection channel and detection type may not be the same,
system can only restore default setup of current detect type. For example, if you click Default
button at the tampering interface, you can only restore default tampering setup. It is null for other
detect types.
 System only enables tampering function during the period you set here. It is null for motion
detect or video loss type.
157
Figure 4-87
4.10.3.2 Alarm
Before operation, please make sure you have properly connected alarm devices such as buzzer.
In the main menu, from Setting->Event->Alarm, you can see alarm setup interface.
For analog channel, the interface is shown as in Figure 4-88 and Figure 4-89 .
For digital channel, there are four alarm types. See Figure 4-88 to Figure 4-91.
 Local alarm: The alarm signal system detects from the alarm input port.
 Network alarm: It is the alarm signal from the network.
 IPC external alarm: It is the on-off alarm signal from the front-end device and can activate the local
HDVR.
 IPC offline alarm: Once you select this item, system can generate an alarm when the front-end IPC
disconnects with the local HDVR. The alarm can activate record, PTZ, snap and etc. The alarm can
last until the IPC and the HDVR connection resumes.
Important
 If it is your first time to boot up the device, the disconnection status of the front-end
network camera will not be regarded as offline. After one successfully connection, all
the disconnection events will be regarded as IPC offline event.
 When IPC offline alarm occurs, the record and snapshot function of digital channel is
null.
 Alarm in: Here is for you to select channel number.
 Type: normal open or normal close.
 PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to preset, tour&
pattern when there is an alarm. Click “select” button, you can see an interface is shown as in Figure
4-92.

Period: Click set button, you can see an interface is shown as in Figure 4-93. There are two ways
for you to set periods. There are max 6 periods in one day. There are four record types: regular,
158
motion detection (MD), Alarm, MD & alarm.

In Figure 4-93, Select icon
Now the icon is shown as
of several dates, all checked items can be edited together.
. Click
to delete a record type from one period.
In Figure 4-93. Click button
after one date or a holiday, you can see an interface shown as
in Figure 4-94. There are four record types: regular, motion detection (MD), Alarm, MD & alarm.
Anti-dither: Here you can set anti-dither time. Here you can set anti-dither time. The value ranges
from 5 to 600s. The anti-dither time refers to the alarm signal lasts time. It can be seem as the
alarm signal activation stays such as the buzzer, tour, PTZ activation, snapshot, channel record.
The stay time here does not include the latch time. During the alarm process, the alarm signal can
begin an anti-dither time if system detects the local alarm again. The screen prompt, alarm upload,
email and etc will not be activated. For example, if you set the anti-dither time as 10 second, you
can see the each activation may last 10s if the local alarm is activated. During the process, if
system detects another local alarm signal at the fifth second, the buzzer, tour, PTZ activation,
snapshot, record channel will begin another 10s while the screen prompt, alarm upload, email will
not be activated again. After 10s, if system detects another alarm signal, it can generate an alarm
since the anti-dither time is out.
Show message: System can pop up a message to alarm you in the local host screen if you enabled
this function.




Alarm upload: System can upload the alarm signal to the network (including alarm
centre) if you enabled current function.
Send email: System can send out email to alert you when alarm occurs.
Record channel: you can select proper channel to record alarm video (Multiple choices). At the
same time you need to set alarm record in schedule interface (Main Menu->Setting->Schedule) and
select schedule record in manual record interface (Main Menu->Advance->Manual Record).
 Latch: Here is for you to set proper delay duration. Value ranges from 10 to 300 seconds. System
automatically delays specified seconds in turning off alarm and activated output after external al arm
cancelled.
 Tour: Here you can enable tour function when alarm occurs. System supports 1/8-window tour.
Please note the tour setup here has higher priority than the tour setup you set in the Display
interface. Once there two tours are both enabled, system can enable the alarm tour as you set here
when an alarm occurred. If there is no alarm, system implements the tour setup in the Display
interface.
 Snapshot: System can snapshot corresponding channel when an alarm occurs. Please note the
activation snapshot has the higher priority than schedule snapshot. If you have enabled these two
types at the same time, system can activate the activation snapshot when alarm occurs, and
otherwise system just operates the schedule snapshot.
 Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs.
Please note, network alarm means the alarm signal from the TCP/IP. You can use NET SDK to
activate network alarm. Comparing with the local alarm, there is no type, anti-dither, alarm
upload function.


Please highlight icon
to select the corresponding function. After setting all the setups please
click save button, system goes back to the previous menu.
159
Figure 4-88
Figure 4-89
160
.
Figure 4-90
Figure 4-91
161
Figure 4-92
Figure 4-93
Figure 4-94
162
4.10.3.3 Abnormality
There are two types: HDD/Network.
 HDD: HDD error, no disk, no space. See Figure 4-95 and Figure 4-96.
 Network: Disconnection, IP conflict, MAC conflict. See Figure 4-97.
 Alarm output: Please select alarm activation output port (multiple choices).
 Less than: System can alarm you when the HDD space is less than the threshold you set here
(For HDD no space type only).
 Latch: Here you can set corresponding delaying time. The value ranges from 1s-300s. System
automatically delays specified seconds in turning off alarm and activated output after external alarm
cancelled.
 Show message: system can pop up the message in the local screen to alert you when alarm
occurs.
 Alarm upload: System can upload the alarm signal to the network (including alarm centre) if you
enabled current function. For disconnection event, IP conflict event and MAC conflict event, this
function is null.
 Send email: System can send out email to alert you when alarm occurs.
 Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.
Figure 4-95
163
Figure 4-96
Figure 4-97
4.10.3.4 Alarm Output
Here is for you to set proper alarm output such as schedule, manual.
164
Please highlight icon
to select the corresponding alarm output.
After all the setups please click OK button, system goes back to the previous menu. See Figure 4-98.
Figure 4-98
4.10.4 Storage
It is to set HDD management, storage parameters, set record plan and record control.
4.10.4.1 Schedule
It is for you to set record plan and snapshot plan.
4.10.4.1.1 Record
Note:
You need to have proper rights to implement the following operations. Please make sure the HDDs
have been properly installed.
After the system booted up, it is in default 24-hour regular mode. You can set record type and time in
schedule interface.
In the main menu, from Setting->Storage->Schedule, you can go to schedule menu. See Figure
4-102.
Please note you need to go to main menu->Setting->System->General->Holiday to set holiday
date first, otherwise, there is no holiday setup item.
 Channel: Please select the channel number first. You can select “all” if you want to set for the whole
channels.

: Sync connection icon. Select icon
together. Now the icon is shown as
of several dates, all checked items can be edited
.
165






: Click it to delete a record type from one period.
Record Type: Please check the box to select corresponding record type. There are four types:
Regular/MD (motion detect)/Alarm/MD&Alarm.
Week day: There are eight options: ranges from Saturday to Sunday and all.
Holiday: It is to set holiday setup. Please note you need to go to the General interface (Main Menu>System->General) to add holiday first. Otherwise you can not see this item.
Pre-record: System can pre-record the video before the event occurs into the file. The value ranges
from 1 to 30 seconds depending on the bit stream.
Redundancy: System supports redundancy backup function. You can highlight Redundancy button
to activate this function. Please note, before enable this function, please set at least one HDD as
redundant. (Main menu->Setting->Storage->HDD Manager). Please note this function is null if
there is only one HDD.
Period setup: Click button
after one date or a holiday, you can see an interface shown as in
Figure 4-103.There are four record types: regular, motion detection (MD), Alarm, MD & alarm.
Please following the steps listed below to draw the period manually.
 Select a channel you want to set. See Figure 4-99.

Figure 4-99

Set record type. See Figure 4-100.
Figure 4-100

Please draw manually to set record period. There are six periods in one day. See Figure 4-101.
Figure 4-101
166
Please highlight icon
to select the corresponding function. After completing all the setups please
click save button, system goes back to the previous menu.
There are color bars for your reference. Green color stands for regular recording, yellow color
stands for motion detection and red color stands for alarm recording. The white means the MD and
alarm record is valid. Once you have set to record when the MD and alarm occurs, system will not
record neither motion detect occurs nor the alarm occurs.
Figure 4-102
Figure 4-103
4.10.4.1.1.1 Quick Setup
Copy function allows you to copy one channel setup to another. After setting in channel 1, click Copy
button, you can go to interface Figure 4-104. You can see current channel name is grey such as channel
1. Now you can select the channel you want to paste such as channel 5/6/7. If you want to save current
167
setup of channel 1 to all channels, you can click the first box “ALL”. Click the OK button to save current
copy setup. Click the OK button in the Encode interface, the copy function succeeded.
Figure 4-104
4.10.4.1.1.2 Redundancy
Current series product does not support redundancy function.
Redundancy function allows you to memorize record file in several disks. When there is file damage
occurred in one disk, there is a spare one in the other disk. You can use this function to maintain
data reliability and safety.
 In the main menu, from Setting->Storage-> Schedule, you can highlight redundancy button to
enable this function.
 In the main menu, from Main menu->Setting->Storage->HDD Manager, you can set one or more
disk(s) as redundant. You can select from the dropdown list. System auto overwrites old files
once hard disk is full.
Please note only read/write disk or read-only disk can backup file and support file search function,
so you need to set at least one read-write disk otherwise you can not record video.
Note
About redundancy setup:
 If current channel is not recording, current setup gets activated when the channel begin recording
the next time.
 If current channel is recording now, current setup will get activated right away, the current file will be
packet and form a file, then system begins recording as you have just set.
After all the setups please click save button, system goes back to the previous menu.
Playback or search in the redundant disk.
There are two ways for you to playback or search in the redundant disk.
 Set redundant disk(s) as read-only disk or read-write disk (Main menu->Setting->Storage->HDD
Manager)). System needs to reboot to get setup activated. Now you can search or playback file in
redundant disk.
 Dismantle the disk and play it in another PC.
4.10.4.1.2 Snapshot
4.10.4.1.2.1 Schedule Snapshot

On the preview interface, right click mouse and then select Manual->Record, or in the main menu,
from Setting->Storage->Record, check the box to enable snapshot function of corresponding
channels. See Figure 4-105.
168
In main menu, from Setting->Camera->Encode->Snapshot interface, here you can input snapshot
mode as regular, size, quality and frequency. See Figure 4-106.
 In main menu, from Setting->Camera->Encode->Schedule interface, please enable snapshot
function. See Figure 4-107.
Please refer to the following figures for detailed information.

Figure 4-105
Figure 4-106
169
Figure 4-107
4.10.4.1.2.2 Trigger Snapshot
Please follow the steps listed below to enable the activation snapshot function. After you enabled
this function, system can snapshot when the corresponding alarm occurred.
 In main menu, from Setting->Camera->Encode->Snapshot interface, here you can input snapshot
mode as trigger, size, quality and frequency. See Figure 4-108.
 In main menu, from Setting->Event->Detect, please enable snapshot function for specified channels
(Figure 4-109).
Figure 4-108
170
Figure 4-109
4.10.4.1.2.3 Priority
Please note the activation snapshot has the higher priority than schedule snapshot. If you have
enabled these two types at the same time, system can activate the activation snapshot when alarm
occurs, and otherwise system just operates the schedule snapshot.
4.10.4.1.2.4 Image FTP
In the main menu, from Setting->Network->FTP, you can set FTP server information. Please enable
FTP function and then click save button. See Figure 4-110.
Please boot up corresponding FTP server.
Please enable schedule snapshot (Chapter 4.10.4.1.2.1) or activation snapshot (Chapter
4.10.4.1.2.2) first, now system can upload the image file to the FTP server.
Please input the
corresponding information
here, if you just upload the
image FTP.
Figure 4-110
171
4.10.4.2 HDD Manager
Here is for you to view and implement hard disk management. See Figure 4-111.
You can see current HDD type, status, capacity and etc. The operation includes format HDD, and
change HDD property (read and write/read-only/redundancy).
Figure 4-111
4.10.4.3 Record
4.10.4.3.1 Record Control
Caution:
You need to have proper rights to implement the following operations. Please make sure the HDD
has been properly installed.
There are three ways for you to go to manual record menu.
 Right click mouse and then select Manual->Record.
 In the main menu, from Setting->Storage->Record.
 In live viewing mode, click record button in the front panel or record button in the remote co ntrol.
System supports main stream and sub stream. There are three statuses: schedule/manual/stop. See
Figure 4-112. Please highlight icon“○” to select corresponding channel.
 Manual: The highest priority. After manual setup, all selected channels will begin ordinary recording.
 Schedule: Channel records as you have set in recording setup (Main Menu->Setting->System>>Schedule)
 Stop: Current channel stops recording.
 All: Check All button after the corresponding status to enable/disable all-channel schedule/manual
record or enable/disable all channels to stop record.
172
Figure 4-112
4.10.4.3.2 Snapshot Operation
Check the corresponding box to enable/disable schedule snapshot function. See Figure 4-113.
Figure 4-113
Tips
You can check All button after the corresponding status to enable/disable all-channel snapshot function.
4.10.4.4 HDD Detect
173
The HDD detect function is to detect HDD current status so that you can clearly understand the HDD
performance and replace the malfunction HDD.
There are two detect types:
 Quick detect is to detect via the universal system files. System can quickly complete the HDD scan.
If you want to use this function, please make sure the HDD is in use now. If the HDD is removed
from other device, please make sure the write-data once was full after it installed on current device.

Global detect adopts Windows mode to scan. It may take a long time and may affect the HDD that
is recording.
4.10.4.4.1 Manual Detect
The manual detect interface is shown as below. See Figure 4-114.
Please select detect type and HDD. Click start detect to begin. You can view the corresponding detect
information. See Figure 4-115.
Figure 4-114
174
Figure 4-115
4.10.4.4.2 Detect Report
After the detect operation, you can go to the detect report to view corresponding information.
The detect report interface is shown as below. See Figure 4-116.
Figure 4-116
Click the item you can see the detailed information such as detect result. See Figure 4-117.
175
Figure 4-117
4.10.5 System
4.10.5.1 General
4.10.5.1.1 Device
General setting includes the following items. See Figure 4-118.
 Device ID: Please input a corresponding device name here.
 Device No: Here you can set device number.
 Language: System supports various languages: Chinese (simplified), Chinese (Traditional), English,
Italian, Japanese, French, Spanish (All languages listed here are optional. Slight difference maybe
found in various series.)
 Video standard: There are two formats: NTSC and PAL.
 Video mode: It is to set max decode mode of the analog signal. There are two options: 960H/D1.
Please note this item is only valid when all channels are analog modes only.
 HDD full: Here is for you to select working mode when hard disk is full. There are two options: stop
recording or rewrite. If current working HDD is overwritten or the current HDD is full while the next
HDD is no empty, then system stops recording, If the current HDD is full and then next HDD is not
empty, then system overwrites the previous files.
 Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120 minutes.
Default value is 60 minutes.
 Real-time playback: It is to set playback time you can view in the preview interface. The value
ranges from 5 to 60 minutes.
 Auto logout: Here is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.
 Navigation bar: Check the box here, system displays the navigation bar on the interface.
176


Startup wizard: Once you check the box here, system will go to the startup wizard directly when the
system restarts the next time. Otherwise, it will go to the login interface.
Mouse property: You can set double click speed via dragging the slide bard. You can Click Default
button to restore default setup.
Figure 4-118
4.10.5.1.2 Date and Time
The interface is shown as in Figure 4-119.
 Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
 Date separator: There are three denotations to separate date: dot, beeline and solidus.
 DST: Here you can set DST time and date. Here you can set start time and end time by setting
corresponding week setup or by setting corresponding date setup.
 NTP: It is to set NTP server information.
177
Figure 4-119
4.10.5.1.3 Holiday
Holiday setup interface is shown as in Figure 4-120. Click Add new holiday button, you can input new
holiday information. See Figure 4-121. Here you can set holiday name, repeat mode and start/end time.
Note


When you enable Holiday settings and schedule setup at the same time, holiday setting has the
priority. If the selected day is a holiday, then system records as you set in holiday setting. If it is not
a holiday, system records as you set in Schedule interface. Please note
Please note, there is no year setup on the holiday setup. For example, if you set 30th Oct, 2012 as
a holiday, then the date of 30th Oct in each year will be set as a holiday.
178
Figure 4-120
Figure 4-121
4.10.5.2 Display
It is to set display, TV adjust, tour, zero-channel encode, and preview favorites information.
4.10.5.2.1 Display
Display setup interface is shown as below. See Figure 4-122.
 Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255.
179






Channel name: Here is for you to modify channel name. System max support 25-digit (The value
may vary due to different series). Please note all your modification here only applies to DVR local
end. You need to open web or client end to refresh channel name.
Time display: You can select to display time or not when system is playback.
Channel display: You can select to channel name or not when system is playback.
Resolution: There are four options: 1920×1080, 1280×1024(default), 1280×720, 1024×768. Please
note the system needs to reboot to activate current setup.
Image enhance: Check the box; you can optimize the margin of the preview video.
Preview denoise: It is to reduce the video noise and make it clearer. You can set denoise level. The
higher the level is, the clearer the video is.
Please highlight icon
to select the corresponding function.
After completing all the setups please click save button, system goes back to the previous menu.
Figure 4-122
4.10.5.2.2 Tour
Here you can activate tour function. Click Setup button, you can see an interface shown as in Figure
4-123
 Enable tour: Highlight box here to enable this function.
 Interval: System supports 1/8-window tour. Input proper interval value here. The value ranges from
5-120 seconds. It is for schedule tour/alarm/motion detect tour.
 Split: You can select window split mode from the dropdown list.
 Channel group: It is to display all channel groups on current split mode. You can edit and delete a
channel group here. Double click an item in the list; you can edit its channel group setup. Right now
system max supports 32.
 Add: Under specified window split mode, click it to add channel group.
180
 Delete: Click it to remove selected channel group.
 Move up: Click it to move current selected channel up.
 Move down: Click it to move current selected channel down.
 Default: Click it to restore default setup.
Tips:

Use mouse or Shift button to switch
funciton is enabled and

and
button to enable /disable tour.
means the tour
meas tour funciton is disabled.
On the navigation bar, click
or
to enable/disable tour function.
Figure 4-123
4.10.5.2.3 Zero-channel Encoding
Click zero-channel encoding button, you can go to the following interface. See Figure 4-124.Here you
can enable and set zero-channel encoding function so that you can view several video sources at one
channel.
 Enable: This function is disabled by default. Check the box here to enable this function so that you
can control the zero-channel encoding function at the WEB.
 Compression: System default setup is H.264. You can set according to device capability.
 Resolution: The resolution value may vary due to different device capabilities. Please select from
the dropdown list.
 Frame rate: The frame rate value may vary due to different device capabilities. Please select from
the dropdown list.
 Bit Rate: The bit rate value may vary due to different device capabilities and frame rate setups.
Please select from the dropdown list.
 Save: Click the Save button to save current setup. If this function is disabled, you can not operate
zero-channel encoding function at the WEB, the video is black or null even you operate when the
181
function is disabled. After you enabled this function, login the Web and you can select zero-channel
encoding mode at the right corner of the interface
. Select a mode; you can
view the local preview video.
Figure 4-124
4.10.5.2.4 Favorites
It is for you to set and save favorites preview setup. You can select different window display modes and
then select corresponding channel(s). Please note for one mode, one channel can only be selected once.
See Figure 4-125.
 Set channels: Click it you get channel setup information of current preview interface. For example. If
you window split mode is 4 and channel setup includes channel 1/2/3/4, you can see 4 from the split
dropdown list and then see channel 1/2/3/4 at the middle of the interface.
 Get channels: Click it to activate current setup. You can see current setup effect on the screen right
now.
 Default: it is to restore factory default setup. For example, 1-window mode, it is to display channel 1
and 4-window mode, it is display channel 1/2/3/4.
 Save: Click it to save current setup to Favorites folder. Otherwise, you can not find current setup in
the Favorites.
182
Figure 4-125
On the navigation bar, you can see the Favorites shortcut menu. You can select from the dropdown list.
Click View 1, you can see the channel(s) you saved on the Favorites folder. See Figure 4-126.
Figure 4-126
4.10.5.3 PTZ
The pan/tilt/zoom setup includes the following items. Please select channel first. See Figure 4-127.
 PTZ type: There are two options: local/remote. Please select remote if you are connecting to the
network PTZ. See Figure 4-128.
 Control mode: You can select control mode from the dropdown list. There are two options:
Serial/HDCVI. For HDCVI series product, please select HDCVI. The control signal is sent to the PTZ
via the coaxial cable. For the serial mode, the control signal is sent to the PTZ via the RS485 port.
 Protocol: Please select corresponding protocols such as PELCOD.
 Address: input corresponding PTZ address.
 Baud rate: Select baud rate.
 Data bit: Select data bit.
 Stop bit: Select stop bit.
 Parity: There are three choices: none/odd/even.
After completed all the setups please click save button, system goes back to the previous menu.
183
Figure 4-127
Figure 4-128
4.10.5.4 ATM/POS
The ATM/POS function is for financial areas. It includes Sniffer, information analysis and title overlay
function. The Sniffer mode is network.
The network type interface is shown as below. See Figure 4-129.
Here we take the ATM/POS protocol to continue.
There are two types: with or without the protocol according to client’s requirements.
184
With the protocol
For ATM/POS with the protocol, you just need to set the source IP, destination IP (sometimes you need
to input corresponding port number).
Figure 4-129
Without the protocol
For the ATM/POS without the protocol, the interface is shown as in Figure 4-130.
Source IP refers to host IP address that sends out information (usually it is the device host.)
Destination IP refers to other systems that receive information.
Usually you do not need to set source port and target port.
There are total four groups IP. The record channel applies to one group (optional) only.
Six frame ID groups verification can guarantee information validity and legal.
Figure 4-130
185
4.10.5.5 Account
Here is for you to implement account management. See Figure 4-131 and Figure 4-132. Here you can:
 Add new user
 Modify user
 Add group
 Modify group
 Modify password.
For account management please note:
 For the user account name and the user group, the string max length is 6-byte. The backspace in
front of or at the back of the string is invalid. There can be backspace in the middle. The string
includes the valid character, letter, number, underline, subtraction sign, and dot.
 The default user amount is 64 and the default group amount is 20. System account adopts two-level
management: group and user. No limit to group or user amount.
 For group or user management, there are two levels: admin and user.
 The user name and group name can consist of eight bytes. One name can only be used once.
There are four default users: admin/888888/666666 and hidden user “default”. Except user 6666,
other users have administrator right.
 Hidden user “default” is for system interior use only and can not be deleted. When there is no login
user, hidden user “default” automatically login. You can set some rights such as monitor for this
user so that you can view some channel view without login.

One user should belong to one group. User right can not exceed group right.
About reusable function: this function allows multiple users use the same account to login.
About user account and MAC. When you add a new user, you can input the MAC address of current
user. Only the user of the same MAC address can access the device remotely. (MAC address is for
the device of the same LAN.) If you leave MAC address item in blank when you add a new user, the
user of any MAC address can access the device remotely. You can set or change MAC address
when you add or modify a user. The MAC address function is also valid for PSS login.
After all the setups please click save button, system goes back to the previous menu.


Figure 4-131
186
Figure 4-132
4.10.5.5.1 Add/Modify Group
Click add group button in Figure 4-132 , the interface is shown as below. See Figure 4-133.
Here you can input group name and then input some memo information if necessary.
There are total 98 rights such as control panel, shut down, real-time monitor, playback, record, record
file backup, PTZ, user account, system information view, alarm input/output setup, system setup, log
view, clear log, upgrade system, control device and etc.
The modify group interface is similar to the Figure 4-133.
Figure 4-133
4.10.5.5.2 Add/Modify User
187
Click add user button in Figure 4-131 , the interface is shown as in Figure 4-134.
Please input the user name, password, select the group it belongs to from the dropdown list.
Then you can check the corresponding rights for current user.
For convenient user management, usually we recommend the general user right is lower than the admin
account.
The modify user interface is similar to Figure 4-134.
Figure 4-134
When you create a new user, you can input the corresponding MAC address of current user. If you leave
this item in blank, any MAC address user can share this user account to login. Please note system
needs to check the validity of MAC. Only the 12-digit 0-f format address can pass the validity verification.
System only saves small character even you input capitalized one. You can see the corresponding
prompt if there is any illegal input.
4.10.5.6 Auto Maintain
Here you can set auto-reboot time and auto-delete old files setup. You can set to delete the files for the
specified days. See Figure 4-135.
You can select proper setup from dropdown list.
After all the setups please click save button, system goes back to the previous menu.
188
Figure 4-135
4.10.5.7 Config Backup
The configuration file backup interface is shown as below. See Figure 4-136.
This function allows you to import/export system configuration. You can use this function when there are
several devices need the same setup.
 Export: Please connect the peripheral device first and then go to the following interface. Click
Export button, you can see there is a corresponding “Config_Time” folder. Double click the folder,
you can view some backup files.
 Import: Here you can import the configuration files from the peripheral device to current device. You
need to select a folder first. You can see a dialogue box asking you to select a folder if you are
selecting a file. System pops up a dialogue box if there is no configuration file under current folder.
After successfully import, system needs to reboot to activate new setup.
 Format: Click Format button, system pops up a dialogue box for you to confirm current operation.
System begins format process after you click the OK button.
Note:
 System can not open config backup interface again if there is backup operation in the process.
 System refreshes device when you go to the config backup every time and set current directory as
the root directory of the peripheral device.
 If you go to the configuration backup interface first and then insert the peripheral device, please
click Refresh button to view the newly added device.
189
Figure 4-136
4.10.5.8 Default
Click default icon, system pops up a dialogue box. You can highlight
to restore default factory setup.
See Figure 4-137.
 Camera
 Network
 Event
 Storage
 System
Please highlight icon
to select the corresponding function.
After all the setups please click save button, system goes back to the previous menu.
Warning!
System menu color, language, time display mode, video format, IP address, user account will not
maintain previous setup after default operation!
190
Figure 4-137
4.10.5.9 Update
Here is for you to view hardware features, software version, built date, release SN information and etc.
You can also update system here. See Figure 4-138.
 Start: Please insert the USB device that have the update file to the device and then click the Start
button to begin the update.
Important
Please make sure the upgrade file name shall be update.bin.
Figure 4-138
191
5 WEB OPERATION
Slightly difference may be found in the interface due to different series.
5.1 Network Connection
Before web client operation, please check the following items:
 Network connection is right
 DVR and PC network setup is right. Please refer to network setup(main menu->Setting->Network)
 Use order ping ***.***.***.***(* DVR IP address) to check connection is OK or not. Usually the return
TTL value should be less than 255.
 Current series product supports various browsers such as Safari, fire fox browser, Google browser.
Device supports multiple-channel monitor, PTZ control, DVR parameter setup on the Apple PC.
5.2 Login
Open IE and input DVR address in the address column. For example, if your DVR IP is 10.10.3.16, then
please input http:// 10.10.3.16 in IE address column.
System pops up warning information to ask you whether install controls or not. Please click Install button.
See Figure 5-1.
Figure 5-1
After installation, the interface is shown as below. See Figure 5-2.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
Figure 5-2
192
5.3 LAN Mode
For the LAN mode, after you logged in, you can see the main window. See Figure 5-3.
Figure 5-3
This main window can be divided into the following sections.
 Section 1: there are six function buttons: Live(chapter 5.4), playback (chapter 5.10) setup
(chapter 5.8), info (chapter 5.9), alarm (chapter 5.11), and logout (chapter 5.12).
 Section 2: There are channel number and one button: Start all. Start all button is to enable/disable
all-channel real-time monitor. Click it the button becomes yellow. See Figure 5-4.
Figure 5-4
Please refer to Figure 5-5 for main stream and extra stream switch information.
Figure 5-5
 Section 3: Start dialogue button.
You can click this button to enable audio talk. Click 【▼】 to select bidirectional talk mode. There are
four options: DEFAULT,G711a,G711u and PCM. After you enable the bidirectional talk, the Start talk
button becomes End Talk button and it becomes yellow. See Figure 5-6.
193
Please note, if audio input port from the device to the client-end is using the first channel audio input port.
During the bidirectional talk process, system will not encode the audio data from the 1-channel.
Figure 5-6

Section 4: Instant record button. Click it, the button becomes yellow and system begins manual
record. See Figure 5-7. Click it again, system restores previous record mode.
Figure 5-7
 Section 5: Local play button.
The Web can playback the saved (Extension name is dav) files in the PC-end.
Click local play button, system pops up the following interface for you to select local play file. See Figure
5-8.
Figure 5-8





Section 6: From the left to the right ,you can see video quality/fluency/ full screen/1-window/4window/6-window/8-window/9-window/13-window/16-window/20-window/25-window/36-window..
You can set video fluency and real-time feature priority.
Section 7: PTZ operation panel. Please refer to chapter 5.5 for detailed information.
Section 8: Image setup and alarm setup. Please refer to chapter 5.6 for detailed information.
Section 9:From left to right, it is to set video quality, video latency, full screen, 1-window, 4-window.
Section 10:Zero-channel encoding. This function allows you to view several-channel in one
window. It supports 1/4-channel mode. Please go to chapter 4.10.5.2.3 to enable zero-channel
encoding function first.
5.4 Live
194
In section 2, left click the channel name you want to view, you can see the corresponding video in
current window.
On the top left corner, you can view device IP (10.15.6.144), channel number (1), network monitor bit
stream (61Kbps) and stream type: M (Main stream)/S (Sub stream). See Figure 5-9.
1
2
3
4
Figure 5-9
On the top right corner, there are six unction buttons. See Figure 5-10.
1
2
3
4
5
Figure 5-10





1: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. right click
mouse system restores original status.
2: Local record. When you click local record button, the system begins recording and this button
becomes highlighted. You can go to system folder RecordDownload to view the recorded file.
3: Snapshot picture. You can snapshoot important video. All images are memorized in system client
folder PictureDownload (default).
4: Audio :Turn on or off audio.(It has no relationship with system audio setup )
5: Close video.
5.5 PTZ
Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to chapter
5.8.5.3).
There are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent
positioning key.
Click 3D intelligent positioning key, system goes back to the single screen mode. Drag the mouse in the
screen to adjust section size. It can realize PTZ automatically.
Please refer to the following sheet for PTZ setup information.
Parameter
Function
Scan



Preset


Select Scan from the dropdown list.
Click Set button, you can set scan left and right limit.
Use direction buttons to move the camera to you desired
location and then click left limit button. Then move the camera
again and then click right limit button to set a right limit.
Select Preset from the dropdown list.
Turn the camera to the corresponding position and Input the
preset value. Click Add button to add a preset.
195
Parameter
Function
Tour


Pattern
Aux
Light and
wiper
Select Tour from the dropdown list.
Input preset value in the column. Click Add preset button, you
have added one preset in the tour.
 Repeat the above procedures you can add more presets in one
tour.
 Or you can click delete preset button to remove one preset from
the tour.
 Select Pattern from the dropdown list.
 You can input pattern value and then click Start button to begin
PTZ movement such as zoom, focus, iris, direction and etc.
Then you can click Add button to set one pattern.
 Please input the corresponding aux value here.
 You can select one option and then click AUX on or AUX off
button.
You can turn on or turn off the light/wiper.
3D Intelligent Positioning
Key
You can click this icon to
display or hide the PTZ
control platform.
Figure 5-11
5.6 Image
Select one monitor channel video and then click Image button in section 8, the interface is shown as
Figure 5-12.
5.6.1 Image
Here you can adjust its brightness, contrast, hue and saturation. (Current channel border becomes
green).
Or you can click Reset button to restore system default setup.
196
Figure 5-12
5.7 WAN Login
In WAN mode, after you logged in, the interface is shown as below. See Figure 5-13.
Figure 5-13
Please refer to the following contents for LAN and WAN login difference.
1) In the WAN mode, system opens the main stream of the first channel to monitor by default. The
open/close button on the left pane is null.
2) You can select different channels and different monitor modes at the bottom of the interface. See
Figure 5-14.
197
Figure 5-14
Important
The window display mode and the channel number are by default. For example, for the 16channel, the max window split mode is 16.
3) Multiple-channel monitor, system adopts extra stream to monitor by default. Double click one channel,
system switches to single channel and system uses main stream to monitor. You can view there are two
icons at the left top corner of the channel number for you reference. M stands for main stream. S stands
for sub stream (extra stream).
4) If you login via the WAN mode, system does not support alarm activation to open the video function in
the Alarm setup interface.
Important
 For multiple-channel monitor mode, system adopts extra stream to monitor by default. You can not
modify manually. All channels are trying to synchronize. Please note the synchronization effect still
depends on your network environments.
 For bandwidth consideration, system can not support monitor and playback at the same time.
System auto closes monitor or playback interface when you are searching setup in the configuration
interface. It is to enhance search speed.
5.8 Setup
5.8.1 Camera
5.8.1.1 Remote Device
Remote device interface is shown as below. See Figure 5-15.
198
Figure 5-15
Figure 5-16
Please refer to the following sheet for log parameter information.
Parameter
Function
Device
search
Click Device search button, you can view the searched device
information on the list. It includes device IP address, port, device
name, manufacturer and type.
Add
Select a device in the list and then click Add button, system can
connect the device automatically and add it to the Added device list.
Or you can double click one item in the list to add a device.
Modify
Click
or any device in the Added device list, you can change the
corresponding channel setup.
Delete
Click
, you can delete the remote connection of the
corresponding channel.
199
Parameter
Connection
status
Function
: Connection succeeded.
: Connection failed.
Delete
Select a device in the Added device list and then click Delete button,
system can disconnect the device and remove it from the Added
device list.
Manual
Add
Click it, the interface is shown as in Figure 5-16. Here you can add
network camera manually.
You can select a channel from the dropdown list (Here only shows
disconnection channel.)
Note:
 System supports manufactures such as Panasonic, Sony,
Dynacolor, Samsung, AXIS, Arecont, Dahua and Onvif standard
protocol.
 If you do not input IP address here. System uses default IP
192.168.0.0 and system does not connect to this IP.
 Can not add two devices at the same time. Click OK button
here, system only connect to the corresponding device of
current channel.
5.8.1.2 Conditions
Here you can view device property information. The setups become valid immediately after you set. See
Figure 5-17 (analog channel) and Figure 5-18 (digital channel).
Figure 5-17
200
Figure 5-18
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Please select a channel from the dropdown list.
Period
It divides one day (24 hours) to two periods. You can set
different hue, brightness, and contrast for different periods.
Hue
It is to adjust monitor video brightness and darkness level. The
default value is 50.
The bigger the value is, the large the contrast between the
bright and dark section is and vice versa.
Brightness
It is to adjust monitor window brightness. The default value is
50.
The larger the number is , the bright the video is. When you
input the value here, the bright section and the dark section of
the video will be adjusted accordingly. You can use this
function when the whole video is too dark or too bright. Please
note the video may become hazy if the value is too high. The
value ranges from 0 to 100.The recommended value ranges
from 40 to 60.
Contrast
It is to adjust monitor window contrast. The value ranges from 0
to 100. The default value is 50.
The larger the number is, the higher the contrast is. You can
use this function when the whole video bright is OK but the
contrast is not proper. Please note the video may become hazy
if the value is too low. If this value is too high, the dark section
may lack brightness while the bright section may over
exposure .The recommended value ranges from 40 to 60.
Saturation
It is to adjust monitor window saturation. The value ranges from
0 to 100. The default value is 50.
The larger the number is, the strong the color is. This value has
no effect on the general brightness of the whole video. The
video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white
balance is not accurate. Please note the video may not be
attractive if the value is too low. The recommended value
201
ranges from 40 to 60.
Gain
The gain adjust is to set the gain value. The smaller the value
is, the low the noise is. But the brightness is also too low in the
dark environments. It can enhance the video brightness if the
value is high. But the video noise may become too clear.
White level
It is to enhance video effect.
Color mode
It includes several modes such as standard, color. You can
select corresponding color mode here, you can see hue,
brightness, and contrast and etc will adjust accordingly.
Auto Iris
It is to enable/disable auto iris function.
Flip
It is to switch video up and bottom limit.
This function is disabled by default.
Mirror
It is to switch video left and right limit.
This function is disabled by default.
BLC
Mode
BLC
The device auto exposures according to the environments
situation so that the darkest area of the video is cleared
WDR
For the WDR scene, this function can lower the high bright
section and enhance the brightness of the low bright section. So
that you can view these two sections clearly at the same time.
The value ranges from 1 to 100. When you switch the camera
from no-WDR mode to the WDR mode, system may lose
several seconds record video.
HLC
After you enabled HLC function, the device can lower the
brightness of the brightest section according to the HLC control
level. It can reduce the area of the halo and lower the
brightness of the whole video.
Off
It is to disable the BLC function. Please note this function is
disabled by default.
Profile
It is to set the white balance mode. It has effect on the general
hue of the video. This function is on by default.
You can select the different scene mode such as auto, sunny,
cloudy, home, office, night, disable and etc to adjust the video
to the best quality.
Day/Night

Auto: The auto white balance is on. System can auto
compensate the color temperature to make sure the vide
color is proper.

Sunny: The threshold of the white balance is in the sunny
mode.

Night: The threshold of the white balance is in the night
mode.

Customized: You can set the gain of the red/blue channel.
The value reneges from 0 to 100.
It is to set device color and the B/W mode switch. The default
setup is auto.

Color: Device outputs the color video.

Auto: Device auto select to output the color or the B/W
202
video according to the device feature (The general bright of
the video or there is IR light or not.)

B/W: The device outputs the black and white video.

Sensor: It is to set when there is peripheral connected IR
light.
5.8.1.3 Encode
5.8.1.3.1 Encode
The encode interface is shown as below. See Figure 5-19.
Figure 5-19
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Please select a channel from the dropdown list.
Video enable
Check the box here to enable extra stream video. This item is
enabled by default.
Code stream
type
It includes main stream, motion stream and alarm stream. You
can select different encode frame rates form different recorded
events.
System supports active control frame function (ACF). It allows
you to record in different frame rates.
For example, you can use high frame rate to record important
events, record scheduled event in lower frame rate and it allows
you to set different frame rates for motion detection record and
alarm record.
Compression
The main bit stream supports H.264. The extra stream supports
H.264, MJPG.
Resolution
System supports various resolutions, you can select from the
dropdown list. The main stream supports
1080P/720P/960H/D1/HD1/2CIF/CIF/QCIF; the extra stream
203
supports CIF/QCIF. Please note the option may vary due to
different series.
Frame Rate
Bit Rate
PAL:1~25f/s;NTSC:1~30f/s.

Main stream: You can set bit rate here to change video
quality. The large the bit rate is, the better the quality is.
Please refer to recommend bit rate for the detailed
information.

Extra stream: In CBR, the bit rate here is the max value.
In dynamic video, system needs to low frame rate or
video quality to guarantee the value. The value is null in
VBR mode.
Reference bit
rate
Recommended bit rate value according to the resolution and
frame rate you have set.
I Frame
Here you can set the P frame amount between two I frames.
The value ranges from 1 to 150. Default value is 50.
Recommended value is frame rate *2.
Audio source
Watermark
enable
Please select from the dropdown list. There are two
options: Normal/HDCVI. In the normal mode, the audio
signal comes from the Audio In. In the HDCVI mode,
the audio signal comes from the coaxial cable of the
camera.
This function allows you to verify the video is tampered
or not.
Here you can select watermark bit stream, watermark mode
and watermark character. Default character is DigitalCCTV. The
max length is 85-digit. The character can only include number,
character and underline.
5.8.1.3.2 Snapshot
The snapshot interface is shown as in Figure 5-20.
Figure 5-20
Please refer to the following sheet for detailed information.
Parameter
Function
Snapshot type
There are two modes: Regular (schedule) and Trigger.
 Regular snapshot is valid during the specified period you
set.
 Trigger snapshot only is valid when motion detect alarm,
tampering alarm or local activation alarm occurs.
Image size
It is the same with the resolution of the main stream.
204
Quality
It is to set the image quality. There are six levels.
Interval
It is to set snapshot frequency. The value ranges from 1s to 7s.
Or you can set customized value. The max setup is
3600s/picture.
Click it; you can copy current channel setup to other
channel(s).
Copy
5.8.1.3.3 Video Overlay
The video overlay interface is shown as in Figure 5-21.
Figure 5-21
Please refer to the following sheet for detailed information.
Parameter
Function
Cover-area
Check Preview or Monitor first.
Click Set button, you can privacy mask the specified video in
the preview or monitor video.
System max supports 4 privacy mask zones.
Time Title
You can enable this function so that system overlays time
information in video window.
You can use the mouse to drag the time title position.
You can view time title on the live video of the WEB or the
playback video.
Channel Title
You can enable this function so that system overlays channel
information in video window.
You can use the mouse to drag the channel title position.
You can view channel title on the live video of the WEB or the
playback video.
5.8.1.3.4 Path
The storage path interface is shown as in Figure 5-22.
205
Here you can set snap image saved path (
(
in the preview interface) and the record storage path
in the preview interface).The default setup is C:\PictureDownload and C:\RecordDownload.
Please click the Save button to save current setup.
Figure 5-22
5.8.1.4 Channel Name
Here you can set channel name. See Figure 5-23.
Figure 5-23
5.8.2 Network
5.8.2.1 TCP/IP
The TCP/IP interface is shown as in Figure 5-24.
Figure 5-24
Please refer to the following sheet for detailed information.
Parameter
Function
Mode
There are two modes: static mode and the DHCP mode.
206

The IP/submask/gateway are null when you select the
DHCP mode to auto search the IP.

If you select the static mode, you need to set the
IP/submask/gateway manually.

If you select the DHCP mode, you can view the
IP/submask/gateway from the DHCP.

If you switch from the DHCP mode to the static mode, you
need to reset the IP parameters.

Besides, IP/submask/gateway and DHCP are read-only
when the PPPoE dial is OK.
Mac Address
It is to display host Mac address.
IP Version
It is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
IP Address
Please use the keyboard to input the corresponding number to
modify the IP address and then set the corresponding subnet
mask and the default gateway.
Preferred DNS
DNS IP address.
Alternate DNS
Alternate DNS IP address.
For the IP address of IPv6 version, default gateway, preferred DNS and
alternate DNS, the input value shall be 128-digit. It shall not be left in blank.
LAN load
System can process the downloaded data first if you enable
this function. The download speed is 1.5X or 2.0X of the normal
speed.
5.8.2.2 P2P
The P2P interface is shown as in Figure 5-25.
You can scan the QR code to login the device in the WAN. Please refer to P2P operation manual
included in the resources CD for detailed information.
Figure 5-25
5.8.2.3 Connection
The connection interface is shown as in Figure 5-26.
207
Figure 5-26
Please refer to the following sheet for detailed information.
Parameter
Function
Max connection
It is the max Web connection for the same device. The value
ranges from 1 to 120. The default setup is 120.
TCP port
The default value is 37777. You can input the actual port
number if necessary.
UDP port
The default value is 37778. You can input the actual port
number if necessary.
HTTP port
The default value is 80. You can input the actual port number if
necessary.
HTTPS
The default value is 443. You can input the actual port number
if necessary.
RTSP port
The default value is 554.
5.8.2.4 WIFI
Please note this function is for the device of WIFI module.
The WIFI interface is shown as in Figure 5-27.
Figure 5-27
208
Please check the box to enable WIFI function and then click the Search SSID button. Now you can view
all the wireless network information in the following list. Double click a name to connect to it. Click
Refresh button, you can view latest connection status.
5.8.2.5 3G
5.8.2.5.1 CDMA/GPRS
The CDMA/GPRS interface is shown as in Figure 5-28.
Figure 5-28
Please refer to the following sheet for detailed information.
Parameter
Function
WLAN type
Here you can select 3G network type to distinguish the 3G
module from different ISP. The types include WCDMA,
CDMA1x and etc.
APN/Dial No.
Here is the important parameter of PPP.
Authorization
It includes PAP,CHAP,NO_AUTH.
Pulse interval
It is to set time to end 3G connection after you close extra
stream monitor. For example, if you input 60 here, system ends
3G connection after you close extra stream monitor 60
seconds.
Important

If the pulse interval is 0, then system does not end 3G connection after
you close the extra stream monitor.

Pulse interval here is for extra stream only. This item is null if you are
using main stream to monitor.
5.8.2.5.2 Mobile
The mobile setup interface is shown as in Figure 5-29.
Here you can activate (send out “on”) or turn off (Send out “off”) the 3G connected phone or mobile
phone, or the phone you set to get alarm message.
209
Check send SMS box and then input the phone number in the receiver column. Click
to add one
receiver. Repeat the above steps you can add more phones. Select a phone number and then click
,
you can delete it. Click OK button to complete the setup.
Figure 5-29
5.8.2.6 PPPoE
The PPPoE interface is shown as in Figure 5-30.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the
IP address column.
Please note, you need to use previous IP address in the LAN to login the device. Please go to the
IP address item to via the device current device information. You can access the client-end via
this new address.
Figure 5-30
5.8.2.7 DDNS
The DDNS interface is shown as in Figure 5-31.
The DDNS is to set to connect the various servers so that you can access the system via the server.
Please go to the corresponding service website to apply a domain name and then access the system via
the domain. It works even your IP address has changed.
Please select DDNS from the dropdown list (Multiple choices). Before you use this function, please
make sure your purchased device support current function.
210
Figure 5-31
Please refer to the following sheet for detailed information.
Parameter
Function
Server Type
You can select DDNS protocol from the dropdown list and then
enable DDNS function.
Server IP
DDNS server IP address
Server Port
DDNS server port.
Domain Name
Your self-defined domain name.
User
The user name you input to log in the server.
Password
The password you input to log in the server.
Update period
Device sends out alive signal to the server regularly.
You can set interval value between the device and DDNS server
here.
Quick DDNS and Client-end Introduction
1) Background Introduction
Device IP is not fixed if you use ADSL to login the network. The DDNS function allows you to access the
DVR via the registered domain name. Besides the general DDNS, the quick DDNS works with the
device from the manufacturer so that it can add the extension function.
2) Function Introduction
The quick DDNS client has the same function as other DDNS client end. It realizes the bonding of the
domain name and the IP address. Right now, current DDNS server is for our own devices only. You
need to refresh the bonding relationship of the domain and the IP regularly. There is no user name,
password or the ID registration on the server. At the same time, each device has a default domain name
(Generated by MAC address) for your option. You can also use customized valid domain name (has not
registered.).
3) Operation
Before you use Quick DDNS, you need to enable this service and set proper server address, port value
and domain name.

Server address:www.quickddns.com

Port number:80

Domain name:There are two modes: Default domain name and customized domain name.
Except default domain name registration, you can also use customized domain name (You can input
your self-defined domain name.) After successful registration, you can use domain name to login
installed of the device IP.

User name: It is optional. You can input your commonly used email address.
211
Important
 Do not register frequently. The interval between two registrations shall be more than 60 seconds.
Too many registration requests may result in server attack.
 System may take back the domain name that is idle for one year. You can get a notification email
before the cancel operation if your email address setup is OK.
5.8.2.8 IP filter
The IP filter interface is shown as in Figure 5-32.
After you enabled trusted sites function, only the IP listed below can access current DVR.
If you enable blocked sites function, the following listed IP addresses cannot access current DVR.
Figure 5-32
5.8.2.9 Email
The email interface is shown as in Figure 5-33.
Figure 5-33
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Please check the box here to enable email function.
212
Parameter
Function
SMTP Server
Input server address and then enable this function.
Port
Default value is 25. You can modify it if necessary.
Anonymity
For the server supports the anonymity function. You can auto
login anonymously. You do not need to input the user name.
password and the sender information.
User Name
The user name of the sender email account.
Password
The password of sender email account.
Sender
Sender email address.
Authentication
(Encryption
mode)
You can select SSL or none.
Subject
Input email subject here.
Attachment
System can send out the email of the snapshot picture once
you check the box here.
Receiver
Input receiver email address here. Max three addresses.
It supports SSL, TLS email box.
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, motion detection or
the abnormity event activates the email, system sends out the
email according to the interval you specified here. This
function is very useful when there are too many emails
activated by the abnormity events, which may result in heavy
load for the email server.
Please check the box here to enable this function.
Interval
Health mail
enable
Update period
(interval)
Email test
This function allows the system to send out the test email to
check the connection is OK or not.
Please check the box to enable this function and then set the
corresponding interval. The value ranges from 30 minutes to
1440 minutes.
System can send out the email regularly as you set here.
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, please save
the email setup information.
5.8.2.10 FTP
The FTP interface is shown as in Figure 5-34.
It is to set FTP IP, port and etc for remote storage.
Please refer to chapter 4.10.2.9 for detailed information.
213
Figure 5-34
5.8.2.11 UPnP
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. See Figure 5-35.
 In the Windows OS, From Start->Control Panel->Add or remove programs. Click the “Add/Remove
Windows Components” and then select the “Network Services” from the Windows Components
Wizard.
 Click the Details button and then check the “Internet Gateway Device Discovery and Control client”
and “UPnP User Interface”. Please click OK to begin installation.
 Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the DVR can auto detect
it via the “My Network Places”
Figure 5-35
Please refer to the following sheet for detailed information.
Parameter
Function
PAT
Status
Check the corresponding box to enable PAT function.
Display UPnP function status.
214
Parameter
Port mappling list
Add
Delete
Function
It is corresponding to the UPnP mapping information on the router.
Check the box before the service name to enable current PAT service.
Otherwise, the service is null.

Service name:Customized name.

Protocol:Protocol type.

Internal port:The port mapped to the port.

External port:The port current device needs to map.

Device has three mapping items: HTTP/TCP/UDP.
Note
When you set the external port (outport) of the router, the value ranges
from 1024 to 5000. Do not use port 1~255 or system port 256~1023,
in case there is conflict.
Click Add button to add map relationship.
Note
For the data transmission protocol TCP/UDP, the external port and the
internal port shall be the same to guarantee proper data transmission.
Select one service and then click
to delete map relationship.
5.8.2.12 SNMP
The SNMP interface is shown as in Figure 5-36.
The SNMP allows the communication between the network management work station software and the
proxy of the managed device. It is reserved for the 3rd party to develop.
Figure 5-36
Please refer to the following sheet for detailed information.
Parameter
Function
SNMP Port
The listening port of the proxy program of the device. It is a
UDP port not a TCP port. The value ranges from 1 to 65535.
The default value is 161
Read Community
It is a string. It is a command between the manage process
and the proxy process. It defined the authentication, access
control and the management relationship between one proxy
and one group of the managers. Please make sure the device
and the proxy are the same.
The read community will read all the objects the SNMP
supported in the specified name. The default setup is public.
It is a string. It is a command between the manage process
and the proxy process. It defined the authentication, access
control and the management relationship between one proxy
and one group of the managers. Please make sure the device
and the proxy are the same.
Write Community
215
Parameter
Trap address
Trap port
SNMP version
Function
The read community will read/write/access all the objects the
SNMP supported in the specified name. The default setup is
write.
The destination address of the Trap information from the
proxy program of the device.
The destination port of the Trap information from the proxy
program of the device. It is for the gateway device and the
client-end PC in the LAN to exchange the information. It is a
non-protocol connection port. It has no effect on the network
applications. It is a UDP port not TCP port. The value ranges
from 1 to 165535. The default value is 162.
 Check V1, system only processes the information of V1.
 Check V2, system only processes the information of V2.
5.8.2.13 Multicast
The multicast interface is shown as in Figure 5-37.
Multicast is a transmission mode of data packet. When there is multiple-host to receive the same data
packet, multiple-cast is the best option to reduce the broad width and the CPU load. The source host
can just send out one data to transit. This function also depends on the relationship of the group
member and group of the outer.
Figure 5-37
5.8.2.14 Auto Register
The auto register interface is shown as below. See Figure 5-38.
This function allows the device to auto register to the proxy you specified. In this way, you can use the
client-end to access the DVR and etc via the proxy. Here the proxy has a switch function. In the network
service, device supports the server address of IPv4 or domain.
Please follow the steps listed below to use this function.
Please set proxy server address, port, and sub-device name at the device-end. Please enable the auto
register function, the device can auto register to the proxy server.
Figure 5-38
5.8.2.15 Alarm Centre
The alarm centre interface is shown as below. See Figure 5-39.
216
This interface is reserved for you to develop. System can upload alarm signal to the alarm centre when
local alarm occurs.
Before you use alarm centre, please set server IP, port and etc. When an alarm occurs, system can
send out data as the protocol defined, so the client-end can get the data.
Figure 5-39
5.8.2.16 HTTPS
In this interface, you can set to make sure the PC can successfully login via the HTTPS. It is to
guarantee communication data security. The reliable and stable technology can secure the user
information security and device safety. See Figure 5-40.
Note
 You need to implement server certificate again if you have changed device IP.
 You need to download root certificate if it is your first time to use HTTPS on current PC.
Figure 5-40
5.8.2.16.1 Create Server Certificate
If it is your first time to use this function, please follow the steps listed below.
In Figure 5-40, click
button, input country name, state name and etc. Click
Create button. See Figure 5-41.
Note
Please make sure the IP or domain information is the same as your device IP or domain name.
217
Figure 5-41
You can see the corresponding prompt. See Figure 5-42. Now the server certificate is successfully
created.
Figure 5-42
5.8.2.16.2 Download root certificate
In Figure 5-40, click
button, system pops up a dialogue box. See Figure 5-43.
Figure 5-43
Click Open button, you can go to the following interface. See Figure 5-44.
218
Figure 5-44
Click Install certificate button, you can go to certificate wizard. See Figure 5-45.
Figure 5-45
Click Next button to continue. Now you can select a location for the certificate. See Figure 5-46.
219
Figure 5-46
Click Next button, you can see the certificate import process is complete. See Figure 5-47.
Figure 5-47
Click Finish button, you can see system pops up a security warning dialogue box. See Figure 5-48.
Figure 5-48
220
Click Yes button, system pops up the following dialogue box, you can see the certificate download is
complete. See Figure 5-49.
Figure 5-49
5.8.2.16.3 View and set HTTPS port
From Setup->Network->Connection, you can see the following interface. See Figure 5-50.
You can see HTTPS default value is 443.
Figure 5-50
5.8.2.16.4 Login
Open the browser and then input https://xx.xx.xx.xx:port.
xx.xx.xx.xx: is your device IP or domain mane.
Port is your HTTPS port. If you are using default HTTPS value 443, you do not need to add port
information here. You can input https://xx.xx.xx.xx to access.
Now you can see the login interface if your setup is right.
5.8.3 Event
5.8.3.1 Video detect
5.8.3.1.1 Motion Detect
The motion detect interface is shown as in Figure 5-51.
221
Figure 5-51
Figure 5-52
Figure 5-53
222
Figure 5-54
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
You need to check the box to enable motion detection function.
Please select a channel from the dropdown list.
Period
Motion detection function becomes activated in the specified
periods. See Figure 5-52.
There are six periods in one day. Please draw a circle to enable
corresponding period.
Click OK button, system goes back to motion detection interface,
please click save button to exit.
Anti-dither
System only memorizes one event during the anti-dither period.
The value ranges from 5s to 600s.
Sensitivity
There are six levels. The sixth level has the highest sensitivity.
Region
If you select motion detection type, you can click this button to set
motion detection zone. The interface is shown as in Figure 5-53.
Here you can set motion detection zone. There are four zones for
you to set. Please select a zone first and then left drag the mouse
to select a zone. The corresponding color zone displays different
detection zone. You can click Fn button to switch between the
arm mode and disarm mode. In arm mode, you can click the
direction buttons to move the green rectangle to set the motion
detection zone. After you completed the setup, please click
ENTER button to exit current setup. Do remember click save
button to save current setup. If you click ESC button to exit the
region setup interface system will not save your zone setup.
Record
channel
System auto activates motion detection channel(s) to record once
an alarm occurs. Please note you need to set motion detect
record period and go to Storage-> Schedule to set current
channel as schedule record.
Record Delay
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Alarm out
Enable alarm activation function. You need to select alarm output
port so that system can activate corresponding alarm device when
an alarm occurs.
Latch
System can delay the alarm output for specified time after an
alarm ended. The value ranges from 1s to 300s.
223
Parameter
Function
Show
message
System can pop up a message to alarm you in the local host
screen if you enabled this function.
Buzzer
Check the box here to enable this function. The buzzer beeps
when an alarm occurs.
Alarm upload
System can upload the alarm signal to the centre (Including alarm
centre.
Message
When 3G network connection is OK, system can send out a
message when motion detect occurs.
Send Email
If you enabled this function, System can send out an email to alert
you when an alarm occurs.
Tour
You need to check the box here to enable this function. System
begins 1-wiindow or multiple-window tour display among the
channel(s) you set to record when an alarm occurs.
PTZ
Activation
Here you can set PTZ movement when alarm occurs. Such as go
to preset X. See Figure 5-54.
5.8.3.1.2 Video Loss
The video loss interface is shown as in Figure 5-55.
After analysis video, system can generate a video loss alarm when the detected moving signal reached
the sensitivity you set here.
Please note video loss does not support anti-dither, sensitivity, region setup. For rest setups, please
refer to chapter 5.8.3.1.1 motion detect for detailed information.
Figure 5-55
5.8.3.1.3 Tampering
The tampering interface is shown as in Figure 5-56.
After analysis video, system can generate a tampering alarm when the detected moving signal reached
the sensitivity you set here.
For detailed setups, please refer to chapter 5.8.3.1.1 motion detect for detailed information.
224
Figure 5-56
5.8.3.2 Alarm
Before operation, please make sure you have properly connected alarm devices such as buzzer.
The input mode includes local alarm and network alarm.
5.8.3.2.1 Local Alarm
The local alarm interface is shown as in Figure 5-57. It refers to alarm from the local device.
Figure 5-57
225
Figure 5-58
Figure 5-59
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
You need to check the box to enable this function.
Please select a channel from the dropdown list.
Period
This function becomes activated in the specified periods.
There are six periods in one day. Please draw a circle to
enable corresponding period.
Select date. If you do not select, current setup applies to
today only. You can select all week column to apply to the
whole week.
Click OK button, system goes back to local alarm
interface, please click save button to exit.
Anti-dither
Sensor type
Record channel
System only memorizes one event during the anti-dither
period. The value ranges from 5s to 600s.
There are two options: NO/NC.
System auto activates motion detection channel(s) to
record once an alarm occurs. Please note you need to set
alarm record period and go to Storage-> Schedule to set
current channel as schedule record.
226
Parameter
Function
Record Delay
System can delay the record for specified time after alarm
ended. The value ranges from 10s to 300s.
Alarm out
Enable alarm activation function. You need to select alarm
output port so that system can activate corresponding
alarm device when an alarm occurs.
Latch
System can delay the alarm output for specified time after
an alarm ended. The value ranges from 1s to 300s.
Show message
System can pop up a message to alarm you in the local
host screen if you enabled this function.
Buzzer
Check the box here to enable this function. The buzzer
beeps when an alarm occurs.
Alarm upload
System can upload the alarm signal to the centre
(Including alarm centre).
Send Email
If you enabled this function, System can send out an
email to alert you when an alarm occurs.
Tour
You need to check the box here to enable this function.
System begins 1-wiindow or multiple-window tour display
among the channel(s) you set to record when an alarm
occurs.
PTZ Activation
Here you can set PTZ movement when alarm occurs.
Such as go to preset X.
5.8.3.2.2 Net Alarm
The network alarm interface is shown as in Figure 5-60.
Network alarm refers to the alarm signal from the network. System does not anti-dither and sensor type
setup. For setup information, please refer to chapter 5.8.3.2.1.
Figure 5-60
5.8.3.3 Abnormality
227
It includes two types: No disk, disk error, disk no space, net disconnection, IP conflict and MAC conflict.
See Figure 5-61 and Figure 5-62.
Figure 5-61
Figure 5-62
Please refer to the following sheet for detailed information.
Parameter
Function
Event
Type
The abnormal events include: No disk, disk error, disk no space, net
disconnection, IP conflict and MAC conflict.
You can set one or more items here.
Less than: You can set the minimum percentage value here (For disk
not space only). The device can alarm when capacity is not sufficient.
You need to draw a circle to enable this function.
Enable
Check the box here to enable selected function.
Alarm Out
Please select corresponding alarm output channel when an alarm
occurs. You need to check the box to enable this function.
Latch
The alarm output can delay for the specified time after an alarm stops.
The value ranges from 1s to 300s.
Show
message
System can pop up a message to alarm you in the local host screen if
you enabled this function.
Alarm
upload
System can upload the alarm signal to the centre (Including alarm
centre.
Send
Email
If you enabled this function, System can send out an email to alert you
when an alarm occurs.
Buzzer
Check the box here to enable this function. The buzzer beeps when an
alarm occurs.
228
5.8.4 Storage
5.8.4.1 Schedule
In this interfaces, you can add or remove the schedule record/snapshot setup. See Figure 5-63.
There are three record modes: general (auto), motion detect and alarm. There are six periods in one day.
You can view the current time period setup from the color bar.
 Green color stands for the general record/snapshot.
 Yellow color stands for the motion detect record/snapshot..
 Red color stands for the alarm record/snapshot.
 Blue color stands for MD&alarm record/snapshot.
Figure 5-63
Figure 5-64
229
Figure 5-65
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Please select a channel from the dropdown list.
Pre-record
Please input pre-record time here. The value ranges from 0 to 30.
Redundancy
Check the box here to enable redundancy function. Please note this
function is null if there is only one HDD.
Snapshot
Check the box here to enable snapshot function.
Holiday
Check the box here to enable holiday function.
Setup
(Sunday to
Saturday)
Click the Setup button, you can set record period. See Figure 5-64.
There are six periods in one day. If you do not check the date at the
bottom of the interface, current setup is for today only.
Please click Save button and then exit.
Setup
(Holiday)
Click the Setup button, you can set record period. See Figure 5-64.
There are six periods in one day. If you check Holiday box, current
channel shall record as your holiday setup here.
Copy
Copy function allows you to copy one channel setup to another. After
setting in channel, click Copy button, you can go to interface Figure
5-65. You can see current channel name is grey such as channel 1.
Now you can select the channel you want to paste such as channel
5/6/7. If you want to save current setup of channel 1 to all channels,
you can click the first box “ALL”. Click the OK button to save current
copy setup. Click the OK button in the Encode interface, the copy
function succeeded.
5.8.4.2 Local Storage
The local interface is shown as in Figure 5-66. Here you can see HDD information. You can also operate
the read-only, read-write, redundancy (if there are more than on HDD) and format operation.
Figure 5-66
5.8.4.3 Record
The interface is shown as in Figure 5-67.
230
Figure 5-67
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Here you can view channel number.
The number displayed here is the max channel amount of your
device.
Status
There are three statuses: schedule, manual and stop.
Schedule
System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).
Manual
It has the highest priority.
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop current channel record no matter what period applied in the
record setup.
Check the corresponding All button, you can enable or disable all
channels record.
Stop
Start all/
stop all
5.8.5 Setting
5.8.5.1 General
The general interface includes general, date/time and holiday setup.
5.8.5.1.1 General
The general interface is shown as in Figure 5-68.
231
Figure 5-68
Please refer to the following sheet for detailed information.
Parameter
Function
Device ID
It is to set device name.
Device No.
It is device channel number.
Language
You can select the language from the dropdown list.
Please note the device needs to reboot to get the modification
activated.
Video
Standard
This is to display video standard such as PAL.
HDD full
Here is for you to select working mode when hard disk is full. There
are two options: stop recording or rewrite. If current working HDD is
overwritten or the current HDD is full while the next HDD is no
empty, then system stops recording, If the current HDD is full and
then next HDD is not empty, then system overwrites the previous
files.
Here is for you to specify record duration. The value ranges from 1
to 120 minutes. Default value is 60 minutes.
Pack
duration
5.8.5.1.2 Date and time
The date and time interface is shown as in Figure 5-69
232
Figure 5-69
Please refer to the following sheet for detailed information.
Parameter
Function
Date format
Here you can select date format from the dropdown list.
Time
Format
There are two options: 24-H and 12-H.
Time zone
The time zone of the device.
System
time
It is to set system time. It becomes valid after you set.
Sync PC
You can click this button to save the system time as your PC current
time.
DST
Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week
format.
NTP
You can check the box to enable NTP function.
NTP server
You can set the time server address.
Port
It is to set the time server port.
Interval
It is to set the sync periods between the device and the time server.
5.8.5.1.3 Holiday Setup
Holiday setup interface is shown as in Figure 5-70.
Here you can click Add box to add a new holiday and then click Save button to save.
233
Figure 5-70
5.8.5.2 Display
Display interface includes GUI, TV adjust, Tour and zero-channel encoding.
5.8.5.2.1 Display
Here you can set background color and transparency level. See Figure 5-71.
Figure 5-71
Please refer to the following sheet for detailed information.
Parameter
Function
Resolution
There are four options:
1920×1080,1280×1024(default),1280×720,1024×768. Please note
the system needs to reboot to activate current setup.
Here is for you to adjust transparency. The value ranges from 128
to 255.
Check the box here, you can view system time and channel
number on the monitor video.
Transparency
Time
title/channel
title
Image
enhance
Check the box; you can optimize the margin of the preview video.
5.8.5.2.2 Tour
The tour interface is shown as in Figure 5-72. Here you can set tour interval, split mode, motion detect
tour and alarm tour mode.
234
Figure 5-72
Please refer to the following sheet for detailed information.
Parameter
Function
Enable tour
Check the box here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4/8-window according to device channel amount.
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
Split
Motion
tour/Alarm
tour
5.8.5.2.3 Zero Channel
The zero-channel interface is shown as in Figure 5-73. Here you can enable zero-channel function and
set corresponding information.
Figure 5-73
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Check the box here to enable zero-channel function.
Compression
System supports H.264.
Resolution
Please select from the dropdown list. System supports
D1/CIF/QCIF and etc.
235
Frame rate
Please select from the dropdown list. The value ranges from 125(PAL) or 1-30(NTSC).
Bit rate
Please select from the dropdown list.
5.8.5.3 PTZ
The PTZ interface is shown as in Figure 5-74.
Before setup, please check the following connections are right:
 PTZ and decoder connection is right. Decoder address setup is right.
 Decoder A (B) line connects with DVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to control speed
dome.
Figure 5-74
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Select speed dome connected channel.
PTZ type
There are two options: local/remote.
Control
mode
You can select control mode from the dropdown list. There are two
options: Serial/HDCVI. For HDCVI series product, please select
HDCVI. The control signal is sent to the PTZ via the coaxial cable. For
the serial mode, the control signal is sent to the PTZ via the RS485
port.
Please select corresponding protocol from the dropdown list.
Protocol
Address
Baud
Rate
Data Bit
Set corresponding dome address. Default value is 1. Please note
your setup here shall comply with your dome address; otherwise
you can not control the speed dome.
Select the dome baud rate. Default setup is 9600.
Default setup is 8. Please set according to the speed dome dial switch
setup.
236
Parameter
Function
Stop bit
Default setup is 1. Please set according to the speed dome dial switch
setup.
Parity
Default setup is none. Please set according to the speed dome dial
switch setup.
5.8.5.4 ATM/POS
The ATM/POS function is for financial areas. It includes Sniffer, information analysis and title overlay
function. The Sniffer mode is network.
The network type interface is shown as below. See Figure 5-75.
Here we take the ATM/POS protocol to continue.
There are two types: with or without the protocol according to client’s requirements.
With the protocol
For ATM/POS with the protocol, you just need to set the source IP, destination IP (sometimes you need
to input corresponding port number).
Figure 5-75
Without the protocol
For the ATM/POS without the protocol, the interface is shown as in Figure 5-76.
Source IP refers to host IP address that sends out information (usually it is the device host.)
Destination IP refers to other systems that receive information.
Usually you do not need to set source port and target port.
There are total four groups IP. The record channel applies to one group (optional) only.
Six frame ID groups verification can guarantee information validity and legal.
237
Figure 5-76
5.8.5.5 Account
Note:
 For the character in the following user name or the user group name, system max supports 6-digits.
The space in the front or at the end of the string is null. The valid string includes: character, number,
and underline.
 The user amount default setup is 64 and the group amount default setup is 20. The factory default
setup includes two levels: user and admin. You can set the corresponding group and then set the
rights for the respective user in the specified groups.
 User management adopts group/user modes. The user name and the group name shall be unique.
One user shall be included in only one group.
5.8.5.5.1 User name
In this interface you can add/remove user and modify user name. See Figure 5-77.
Figure 5-77
Add user: It is to add a name to group and set the user rights. See Figure 5-78.
There are four default users: admin/888888/666666 and hidden user “default”. Except user 6666, other
users have administrator right. The user 666666 can only have the monitor rights,.
238
Hidden user “default” is for system interior use only and can not be deleted. When there is no login user,
hidden user “default” automatically login. You can set some rights such as monitor for this user so that
you can view some channel view without login.
Here you can input the user name and password and then select one group for current user.
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than the admin.
Figure 5-78
Modify user
It is to modify the user property, belonging group, password and rights. See Figure 5-79.
Modify password
It is to modify the user password. You need to input the old password and then input the new password
twice to confirm the new setup. Please click the OK button to save.
Please note, the password ranges from 1-digit to 6-digit. It shall include the number only. For the user of
the account rights, he can modify the password of other users.
239
Figure 5-79
5.8.5.5.2 Group
The group management interface can add/remove group, modify group password and etc.
The interface is shown as in Figure 5-80.
Figure 5-80
Add group: It is to add group and set its corresponding rights. See Figure 5-81.
Please input the group name and then check the box to select the corresponding rights. It includes:
shutdown/reboot device, live view, record control, PTZ control and etc.
240
Figure 5-81
Modify group
Click the modify group button, you can see an interface is shown as in Figure 5-82.
Here you can modify group information such as remarks and rights.
Figure 5-82
5.8.5.6 Auto maintain
The auto maintain interface is shown as in Figure 5-83.
241
Here you can select auto reboot and auto delete old files interval from the dropdown list.
If you want to use the auto delete old files function, you need to set the file period.
Click Manual reboot button, you can restart device manually.
Figure 5-83
5.8.5.7 Import/Export
The interface is shown as in Figure 5-84.
Figure 5-84
Please refer to the following sheet for detailed information.
Parameter
Function
Import
It is to import the local setup files to the system.
Export
It is to export the corresponding WEB setup to your local PC.
5.8.5.8 Default
The default setup interface is shown as in Figure 5-85.
Here you can select Channel/Network/Event/Storage/System. Or you can check the All box to select all
items.
Figure 5-85
5.8.5.9 Upgrade
The upgrade interface is shown as in Figure 5-86.
Please select the upgrade file and then click the update button to begin update. Please note the file
name shall be as *.bin. During the upgrade process, do not unplug the power cable, network cable, or
shutdown the device.
242
Important
Improper upgrade program may result in device malfunction!
Figure 5-86
.
5.9 Information
5.9.1 Version
The version interface is shown as in Figure 5-87.
Here you can view record channel, alarm input/output information, software version, release date and
etc. Please note the following information is for reference only.
Figure 5-87
5.9.2 Log
Here you can view system log. See Figure 5-88.
Figure 5-88
Please refer to the following sheet for log parameter information.
243
Parameter
Function
Type
Log types include: system operation, configuration operation, data
operation, event operation, record operation, user management, log
clear.
Start time
Set the start time of the requested log.
End time
Set the end time of the requested log.
Search
You can select log type from the drop down list and then click search
button to view the list.
You can click the stop button to terminate current search operation.
You can select one item to view the detailed information.
Detailed
information
Clear
You can click this button to delete all displayed log files. Please note
system does not support clear by type.
Backup
You can click this button to backup log files to current PC.
5.9.3 Online User
The online user interface is shown as in Figure 5-89.
Figure 5-89
5.10 Playback
Click Playback button, you can see an interface is shown as in Figure 5-90.
244
Figure 5-90
5.10.1 Search Record
Please set record type, record date, window display mode and channel name.
 Select Date
You can click the date on the right pane to select the date. The green highlighted date is system current
date and the blue highlighted date means it has record files.
 Window Split
Select window split mode. Click
to display in full screen. Click ESC button to exit. See Figure 5-91.
Figure 5-91
 Select Channel
1~4 means main stream and A1~A4 means sub stream.
 Select Record Type
Check the corresponding box to select record type. See Figure 5-92.
Figure 5-92
5.10.2 File List
Click File list button, you can see the corresponding files in the list. See Figure 5-93.
245
Figure 5-93
5.10.3 Playback
Select a file you want to play and then click Play button, system can begin playback. You can select to
playback in full-screen. Please note for one channel, system can not playback and download at the
same time. You can use the playback control bar to implement various operations such as play, pause,
stop, slow play, fast play and etc. See Figure 5-94.
Figure 5-94
5.10.4 Download
Select the file(s) you want to download and then click download button, you can see an interface shown
as in Figure 5-95. The Download button becomes Stop button and there is a process bar for your
reference. Please go to you default file saved path to view the files.
246
Figure 5-95
5.10.5 Load more
It is for you to search record or picture. You can select record channel, record type and record time to
download. Or you can use watermark function to verify file.
5.10.5.1 Download By File
Select channel, record type, bit stream type and then input start time and end time. Click Search button,
the download by file interface is shown as in Figure 5-96.
Figure 5-96
247
Check the file(s) you want to download and there are two options for you to save the file(s).
 Download to local
Click Download to local, system pops up the following interface for you to set record format and saved
path.See Figure 5-97.
Figure 5-97
You can click OK to download and view the download process. After the download operation, you can
see corresponding dialog box.
 Download to USB
Connect the corresponding p peripheral device, and then click Download to USB button, you can see the
following interface. See Figure 5-98.
Figure 5-98
Select Backup device and backup type first and then click Start backup button.
After the download operation, you can see corresponding dialogue box.
5.10.5.2 Download by Time
Select channel, bit stream type, start time and end time.
Click Download to Local button, you can see download by time interface is shown as in Figure 5-99.
248
Figure 5-99
Set record format and saved path, you can click OK to download and view the download process. After
the download operation, you can see corresponding dialog box.
5.10.5.3 Watermark
Watermark interface is shown as In Figure 5-100. Please select a file and then click Verify button to see
the file has been tampered with or not
Figure 5-100
5.11 Alarm
Click alarm function, you can see an interface is shown as Figure 5-101.
249
Here you can set device alarm type and alarm sound setup (Please make sure you have enabled audio
function of corresponding alarm events.).
Figure 5-101
Please refer to the following sheet for detailed information.
Type
Parameter
Function
Alarm
Video loss
System alarms when video loss occurs.
Type
Motion detection System alarms when motion detection alarm
occurs.
Operation
Alarm
Sound
Tampering
System alarms when camera is viciously masking.
Disk full
Disk error
External alarm
Prompt
System alarms when disk is full.
System alarms when disk error occurs.
Alarm input device sends out alarm.
Check the box here, system can automatically
pops up an alarm icon on the Alarm button in the
main interface when there is an alarm.
System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Here you can specify alarm sound file.
Play alarm
sound
Sound path
5.12 Log out
Click log out button, system goes back to log in interface. See Figure 5-102.
You need to input user name and password to login again.
250
Figure 5-102
5.13 Un-install Web Control
You can use web un-install tool “uninstall web.bat” to un-install web control.
Please note, before you un-installation, please close all web pages, otherwise the un-installation
might result in error.
251
6 Professional Surveillance System
Besides Web, you can use our Smart PSS to login the device.
For detailed information, please refer to Smart PSS user’s manual.
252
7 FAQ
1. DVR can not boot up properly.
There are following possibilities:

Input power is not correct.

Power connection is not correct.

Power switch button is damaged.

Program upgrade is wrong.

HDD malfunction or something wrong with HDD ribbon.

Seagate DB35.1,DB35.2,SV35 or Maxtor 17-g has compatibility problem. Please upgrade to
the latest version to solve this problem.

Front panel error.

Main board is damaged.
2. DVR often automatically shuts down or stops running.
There are following possibilities:

Input voltage is not stable or it is too low.

HDD malfunction or something wrong with the ribbon.

Button power is not enough.

Front video signal is not stable.

Working environment is too harsh, too much dust.

Hardware malfunction.
3. System can not detect hard disk.
There are following possibilities:

HDD is broken.

HDD ribbon is damaged.

HDD cable connection is loose.

Main board SATA port is broken.
4. There is no video output whether it is one-channel, multiple-channel or all-channel output.
There are following possibilities:

Program is not compatible. Please upgrade to the latest version.

Brightness is 0. Please restore factory default setup.

There is no video input signal or it is too weak.

Check privacy mask setup or your screen saver.

DVR hardware malfunctions.
5. Real-time video color is distorted.
There are following possibilities:

When using BNC output, NTSC and PAL setup is not correct. The real-time video becomes
black and white.

DVR and monitor resistance is not compatible.

Video transmission is too long or degrading is too huge.

DVR color or brightness setup is not correct.
253
6. Can not search local records.
There are following possibilities:

HDD ribbon is damaged.

HDD is broken.

Upgraded program is not compatible.

The recorded file has been overwritten.

Record function has been disabled.
7. Video is distorted when searching local records.
There are following possibilities:

Video quality setup is too low.

Program read error, bit data is too small. There is mosaic in the full screen. Please restart the
DVR to solve this problem.

HDD data ribbon error.

HDD malfunction.

DVR hardware malfunctions.
8. There is no audio when monitor.
There are following possibilities:

It is not a power picker.

It is not a power acoustics.

Audio cable is damaged.

DVR hardware malfunctions.
9. There is audio when monitor but there is no audio when system playback.
There are following possibilities:

Setup is not correct. Please enable audio function

Corresponding channel has no video input. Playback is not continuous when the screen is blue.
10. Time display is not correct.
There are following possibilities:

Setup is not correct

Battery contact is not correct or voltage is too low.

Crystal is broken.
11. DVR can not control PTZ.
There are following possibilities:

Front panel PTZ error

PTZ decoder setup, connection or installation is not correct.

Cable connection is not correct.

PTZ setup is not correct.

PTZ decoder and DVR protocol is not compatible.

PTZ decoder and DVR address is not compatible.
254

When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables
furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is
not stable.

The distance is too far.
12. Motion detection function does not work.
There are following possibilities:

Period setup is not correct.

Motion detection zone setup is not correct.

Sensitivity is too low.

For some versions, there is hardware limit.
13. Can not log in client-end or web.
There are following possibilities:

For Windows 98 or Windows ME user, please update your system to Windows 2000 sp4. Or
you can install client-end software of lower version. Please note right now, our DVR is not
compatible with Windows VISTA control.

ActiveX control has been disabled.

No dx8.1 or higher. Please upgrade display card driver.

Network connection error.

Network setup error.

Password or user name is invalid.

Client-end is not compatible with DVR program.
14. There is only mosaic no video when preview or playback video file remotely.
There are following possibilities:

Network fluency is not good.

Client-end resources are limit.

There is multiple-cast group setup in DVR. This mode can result in mosaic. Usually we do not
recommend this mode.

There is privacy mask or channel protection setup.

Current user has no right to monitor.

DVR local video output quality is not good.
15. Network connection is not stable.
There are following possibilities:

Network is not stable.

IP address conflict.

MAC address conflict.

PC or DVR network card is not good.
16. Burn error /USB back error.
There are following possibilities:

Burner and DVR are in the same data cable.

System uses too much CPU resources. Please stop record first and then begin backup.
255

Data amount exceeds backup device capacity. It may result in burner error.

Backup device is not compatible.

Backup device is damaged.
17. Keyboard can not control DVR.
There are following possibilities:

DVR serial port setup is not correct

Address is not correct

When there are several switchers, power supply is not enough.

Transmission distance is too far.
18. Alarm signal can not been disarmed.
There are following possibilities:

Alarm setup is not correct.

Alarm output has been open manually.

Input device error or connection is not correct.

Some program versions may have this problem. Please upgrade your system.
19. Alarm function is null.
There are following possibilities:

Alarm setup is not correct.

Alarm cable connection is not correct.

Alarm input signal is not correct.

There are two loops connect to one alarm device.
21. Record storage period is not enough.
There are following possibilities:

Camera quality is too low. Lens is dirty. Camera is installed against the light. Camera aperture
setup is not correct.

HDD capacity is not enough.

HDD is damaged.
22. Can not playback the downloaded file.
There are following possibilities:

There is no media player.

No DXB8.1 or higher graphic acceleration software.

There is no DivX503Bundle.exe control when you play the file transformed to AVI via media
player.

No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS.
23. Forgot local menu operation password or network password
Please contact your local service engineer or our sales person for help. We can guide you to solve this
problem.
256
24. When I login via HTTPS, a dialogue says the certificate for this website is for other address.
Please follow chapter 5.8.2.16.1 to create server certificate.
25. When I login via HTTPS, a dialogue says the certificate is not trusted.
Please follow chapter 5.8.2.16.2 to download root certificate.
26. When I login via HTTPS, a dialogue says the certificate has expired or is not valid yet.
Please make sure your PC time is the same as the device time.
Daily Maintenance

Please use the brush to clean the board, socket connector and the chassis regularly.

The device shall be soundly earthed in case there is audio/video disturbance. Keep the device away
from the static voltage or induced voltage.

Please unplug the power cable before you remove the audio/video signal cable, RS232 or RS485
cable.

Do not connect the TV to the local video output port (VOUT).It may result in video output circuit.

Always shut down the device properly. Please use the shutdown function in the menu, or you can
press the power button in the rear pane for at least three seconds to shut down the device.
Otherwise it may result in HDD malfunction.

Please make sure the device is away from the direct sunlight or other heating sources. Please keep
the sound ventilation.

Please check and maintain the device regularly.
257
Appendix A HDD Capacity Calculation
Calculate total capacity needed by each DVR according to video recording (video recording type and
video file storage time).
Step 1: According to Formula (1) to calculate storage capacity q i that is the capacity of each channel
needed for each hour, unit Mbyte.
qi  d i  8  3600  1024
(1)
In the formula: d i means the bit rate, unit Kbit/s
Step 2: After video time requirement is confirmed, according to Formula (2) to calculate the storage
capacity m i , which is storage of each channel needed unit Mbyte.
m i = q i × hi × D i
(2)
In the formula:
hi means the recording time for each day (hour)
D i means number of days for which the video shall be kept
Step 3: According to Formula (3) to calculate total capacity (accumulation) qT that is needed for all
channels in the DVR during scheduled video recording.
c
qT   mi
(3)
i 1
In the formula: c means total number of channels in one DVR
Step 4: According to Formula (4) to calculate total capacity (accumulation) qT that is needed for all
channels in DVR during alarm video recording (including motion detection).
c
qT   mi ×a%
(4)
i 1
In the formula:a% means alarm occurrence rate
258
Appendix B Compatible Backup Device List
Compatible USB drive list
NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below. If
you use the USB drive, please confirm the format FAT or FAT32.
Manufacturer
Model
Capacity
Sandisk
Cruzer Micro
512M
Sandisk
Cruzer Micro
1G
Sandisk
Cruzer Micro
2G
Sandisk
Cruzer Freedom
256M
Sandisk
Cruzer Freedom
512M
Sandisk
Cruzer Freedom
1G
Sandisk
Cruzer Freedom
2G
Kingston
1G
DataTraveler Ⅱ
Kingston
2G
DataTraveler Ⅱ
Kingston
DataTraveler
1G
Kingston
DataTraveler
2G
Maxell
USB Flash Stick
128M
Maxell
USB Flash Stick
256M
Maxell
USB Flash Stick
512M
Maxell
USB Flash Stick
1G
Maxell
USB Flash Stick
2G
Kingax
Super Stick
128M
Kingax
Super Stick
256M
Kingax
Super Stick
512M
Kingax
Super Stick
1G
Kingax
Super Stick
2G
Netac
U210
128M
Netac
U210
256M
Netac
U210
512M
Netac
U210
1G
Netac
U210
2G
Netac
U208
4G
Teclast
Ti Cool
128M
Teclast
Ti Cool
256M
Teclast
Ti Cool
512M
Teclast
Ti Cool
1G
SanDisk
cruzer mirco
2G
SanDisk
cruzer mirco
8G
SanDisk
Ti Cool
2G
SanDisk
Hongjiao
4G
Lexar
Lexar
256MB
Kingston
Data Traveler
1G
Kingston
Data Traveler
16GB
Kingston
Data Traveler
32GB
Aigo
L8315
16GB
Sandisk
250
16GB
Kingston
Data Traveler Locker+
32GB
259
Netac
U228
8GB
Compatible SD Card List
Please refer to the following sheet for compatible SD card brand.
Brand
Standard
Capacity
Transcend
SDHC6
16GB
Kingston
SDHC4
4GB
Kingston
SD
2GB
Kingston
SD
1GB
Sandisk
SDHC2
8GB
Sandisk
SD
1GB
Card type
SD
SD
SD
SD
Micro-SD
Micro-SD
Compatible Portable HDD List
Please refer to the following sheet for compatible portable HDD brand.
Brand
Model
YDStar
YDstar HDD box
Netac
Netac
Iomega RPHD-CG"
Iomega
RNAJ50U287
WD Elements
WCAVY1205901
Newsmy
Liangjian
WD Elements
WDBAAR5000ABK-00
WD Elements
WDBAAU0015HBK-00
Seagate
FreeAgent Go(ST905003F)
Aigo
H8169
Capacity
40G
80G
250GB
1.5TB
320GB
500GB
1.5TB
500GB
500GB
Compatible USB DVD Burner List
NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below.
And you can use the USB cable with the model recommended to set USB burner.
Manufacturer
Model
Sony
DRX-S70U
Benq
TW200D
Compatible SATA DVD Burner List
NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below.
Manufacturer
Model
Pioneer
DVR-215CHG
Panasonic
Samsung
SW-9588-C
TS-H653
Sony
DRU-V200S
Sony
DRU-845S
Samsung
TS-H653
Pioneer
DVR-217CHG
LG
GH22NS30
Compatible SATA HDD List
NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below.
And SATA HDD should be used for the DVR with SATA port. Here we recommend HDD of 500G to 4T
capacity.
Port
Manufacturer Series
Model
Capacity
Mode
260
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate SV35.1
Seagate SV35.1
Seagate SV35.2
Seagate SV35.2
Seagate SV35.2
Seagate SV35.2
Seagate SV35.3
Seagate SV35.3
Seagate SV35.3
Seagate SV35.3
Seagate SV35.4
Seagate SV35.4
Seagate SV35.5
Seagate SV35.5
Seagate SV35.5
Seagate SV35.5
Seagate SV35.5
Seagate SV35.5
Seagate SV35.5
Seagate SV35.5
Seagate SV35.5
Seagate Pipeline HD
Seagate Pipeline HD
Seagate Pipeline HD
Seagate Pipeline HD
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate Pipeline
HD2
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES
ST3250824SV
ST3500641SV
ST3250820SV
ST3320620SV
ST3500630SV
ST3750640SV
ST3250310SV
ST3500320SV
ST3750330SV
ST31000340SV
ST3320410SV
ST3250311SV
ST3500410SV
ST3500411SV
ST31000525SV
ST31000526SV
ST1000VX000
ST2000VX003
ST2000VX002
ST2000VX000
ST3000VX000
ST3320410CS
ST3320310CS
ST3500422CS
ST3500321CS
ST3250412CS
250G
500G
250G
320G
500G
750G
250G
500G
750G
1T
320G
250G
500G
500G
1T
1T
1T
2T
2T
2T
3T
320G
320G
500G
500G
250G
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
SATA
ST3320311CS
250G
SATA
ST3500414CS
500G
SATA
ST3500312CS
500G
SATA
ST31000424CS
1T
SATA
ST31000322CS
1T
SATA
ST1000VM002
1T
SATA
ST1500VM002
1T
SATA
ST2000VM002
2T
SATA
ST2000VM003
2T
SATA
ST3500514NS
500G
SATA
ST31000524NS
1T
SATA
ST32000644NS
2T
SATA
ST2000NM0011
2T
SATA
ST1000NM0011
1T
SATA
ST500NM0011
500G
SATA
261
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Seagate
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES
Seagate
Constellation ES.2
Seagate
Constellation ES.2
Seagate
Constellation ES.2
Seagate
Constellation ES.2
Seagate
Constellation ES.2
Seagate
Constellation ES.2
Cariar SE
ST2000NM0031
2T
SATA
ST1000NM0031
1T
SATA
ST500NM0031
500G
SATA
ST2000NM0051
2T
SATA
ST1000NM0051
1T
SATA
ST500NM0051
500G
SATA
ST33000650NS
3T
SATA
ST32000645NS
2T
SATA
ST33000651NS
3T
SATA
ST32000646NS
2T
SATA
ST33000652NS
3T
SATA
ST32000647NS
2T
SATA
WD3200JD
320G
SATA
Cariar SE
WD3000JD
300G
SATA
Cariar SE
WD2500JS
250G
SATA
Cariar SE16
WD7500KS
750G
SATA
Cariar SE16
WD5000KS
500G
SATA
Cariar SE16
WD4000KD
400G
SATA
Cariar SE16
WD3200KS
320G
SATA
Cariar SE16
WD2500KS
250G
SATA
WD Caviar SE16
WD2500YS-01SHB0
250G
SATA
WD Caviar RE16
WD3200YS-01PGB0
320G
SATA
WD Caviar RE2
WD5000YS-01MPB0
500G
SATA
WD AV—AVJS
WD2500AVJS-63WDA0
500G
SATA
WD AV—AVJS
WD3200AVJS-63WDA0
320G
SATA
WD AV—AVJS
WD5000AVJS-63YJA0
500G
SATA
WDAV-GP—AVCS
WD5000AVCS-63H1B1
500G
SATA
WDAV-GP—AVCS
WD7500AVCS-63ZLB0
750G
SATA
WDAV-GP—AVCS
WD3200AVCS
320G
SATA
262
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Westem
Digital
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Hitachi
Hitachi
Hitachi
Hitachi
WDAV-GP—AVCS
WD2500AVCS
250G
SATA
WDAV-GP—EVCS
WD10EVCS-63ZLB0
1T
SATA
WDAV-GP—EVCS
WD20EVCS-63ZLB0
2T
SATA
WDAV-GP—AVVS
WD3200AVVS-63L2B0
320G
SATA
WDAV-GP—AVVS
WD5000AVVS-63ZWB0
500G
SATA
WDAV-GP—AVVS
WD7500AVVS-63E1B1
750G
SATA
WDAV-GP—AVVS
WD7500AVVS-63E1B1
750G
SATA
WDAV-GP—EVVS
WD10EVVS-63E1B1
1T
SATA
WDAV-GP—EVDS
WD10EVDS-63N5B1
1T
SATA
WDAV-GP—EVDS
WD15EVDS-63V9B0
1.5T
SATA
WDAV-GP—EVDS
WD20EVDS-63T3B0
2T
SATA
WDAV-GP—AVDS
WD5000AVDS-63U7B0
500G
SATA
WD AV-GP
WD30EURS
3T
SATA
WD AV-GP
WD25EURS
2.5T
SATA
WD AV-GP
WD20EURS
2T
SATA
WD AV-GP
WD15EURS
1.5T
SATA
WD AV-GP
WD10EURS
1T
SATA
WD AV-GP
WD10EURX
1T
SATA
WD AV-GP
WD7500AURS
750G
SATA
WD AV-GP
WD7500AVDS
500G
SATA
WD AV-GP
WD500AVDS
500G
SATA
WD AV-GP
WD10EUCX
1T
SATA
Samsung—HA
Samsung—HA
Samsung—HA
Samsung—HD
Samsung—HD
Samsung—HD
HitachiCinemaStar™
5K500
HitachiCinemaStar™
7K1000.B
HitachiCinemaStar™
7K1000.B
HitachiCinemaStar™
7K1000.B
HA500LJ/CE
HA751LJ
HA101UJ/CE
HD502HI/CEC
HD103SI/CEC
HD154UI/CE
HCP725050GLA380
500G
750G
1T
500G
1T
1.5T
500G
SATA
SATA
SATA
SATA
SATA
SATA
SATA
HCT721050SLA360
500G
SATA
HCT721075SLA360
750G
SATA
HCT721010SLA360
1T
SATA
263
Maxtor
Maxtor
DiamondMax 20
DiamondMax 20
STM3320820AS
STM3250820AS
320G
250G
SATA
SATA
264
APPENDIX C Compatible CD/DVD Device List
NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below.
And you can use the USB cable with the model recommended to set USB burner.
Manufacturer
Model
Port Type
Type
Sony
DRX-S50U
USB
DVD-RW
Sony
DRX-S70U
USB
DVD-RW
Sony
AW-G170S
SATA
DVD-RW
Samsung
TS-H653A
SATA
DVD-RW
Panasonic
SW-9588-C
SATA
DVD-RW
Sony
DRX-S50U
USB
DVD-RW
BenQ
5232WI
USB
DVD-RW
265
Appendix D Compatible Displayer List
Please refer to the following sheet for the compatible device brand.
Brand
Model
BENQ(LCD)
ET-0007-TA
DELL(LCD)
E178FPc
BENQ(LCD)
Q7T4
BENQ(LCD)
Q7T3
LENOVO(LCD)
LXB-L17C
SANGSUNG(LCD)
225BW
HFNOVO (CRT)
LXB-FD17069HB
HFNOVO (CRT)
LXB-HF769A
HFNOVO (CRT)
LX-GJ556D
Samsung(LCD)
2494HS
Samsung(LCD)
P2350
Samsung(LCD)
P2250
Samsung(LCD)
P2370G
Samsung(LCD)
2043
Samsung(LCD)
2243EW
Samsung(LCD)
SMT-1922P
Samsung(LCD)
T190
Samsung(LCD)
T240
LG(LCD)
W1942SP
LG(LCD)
W2243S
LG(LCD)
W2343T
BENQ(LCD)
G900HD
BENQ(LCD)
G2220HD
PHILIPS(LCD)
230E
PHILIPS(LCD)
220CW9
PHILIPS(LCD)
220BW9
PHILIPS(LCD)
220EW9
Dimension (Unit: inch)
19-inch (wide screen)
17-inch
17-inch
17-inch
17-inch
22-inch (wide screen)
17-inch
17-inch
17-inch
24-inch
23-inch
22-inch
23-inch
20-inch
22-inch
19-inch
19-inch
24-inch
19-inch
22-inch
23-inch
18.5-inch
22-inch
23-inch
23-inch
24-inch
25-inch
266
Appendix E Compatible Switcher List
Please refer to the following sheet form compatible switcher list.
Brand
Model
D-LinK
DES-1016D
D-LinK
DES-1008D
Ruijie
RG-S1926S
H3C
TP-LINK
TP-LINK
H3C-S1024
TL-SF1016
TL-SF1008+
Network Working Mode
10/100M self-adaptive
10/100M self-adaptive
There are five network
modes:
1、AUTO
2、HALF-10M
3、FULL-10M
4、HALF-100M
5、FULL-100M
10/100M self-adaptive
10/100M self-adaptive
10/100M self-adaptive
267
Appendix F Compatible Wireless Mouse List
Please refer to the following sheet for compatible SD card brand.
Brand
Model
V80
Rapoo
3500
Logitech
M215
Shuangfeiyan
Tianyao G7-630
Note:

This manual for reference only. Slight difference may be found in the user interface.

All the designs and software here are subject to change without prior written notice.

All trademarks and registered trademarks mentioned are the properties of their respective
owners.

If there is any uncertainty or controversy, please refer to the final explanation of us.

Please visit our website or contact your local retailer for more information.
268