24” LED TV
Model NO.: LED-2453MC
Instruction Manual
Contents
Caution
Caution
Safety Information
1
2
Product Introduction
Front View
Rear View
3
3
3
Connections
4
Remote Control
5-6
Basic Operation
7
OSD Menu
1. Video menu
2. Audio menu
3. TV menu
4. Setup menu
5. Time menu
6. Others menu
8-16
8
9
10-12
13
14
15-16
Simple Troubleshooting
17
Caution
Caution
The lightening flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of un-insulated “dangerous
voltage” within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their endof-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live in!
directives.
1
Safety Information
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical safety
• The TV set should only be connected to a mains supply which matches that stated on
the label on the mains adaptor.
• To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial
(if outdoor) and mains adaptor from the supply.
- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet
or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers. There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service
this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
Physical safety
• Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,
but ensure at least 5cm (2") clearance all around the unit.
• Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good
care of the remote control, do not drop it or allow it to come into contact with liquids.
• To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
2
Product Introduction
Product Introduction
Introduction
1. Front View
Remote Control window
POWER to turn on and off.
Null
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 300 to the left or right side and 200 above or below the remote control
window.
MENU:
CH+/-: Press to scan through channels.
VOL+/-:
TV/AV:
POWER:
3
Connections
Connections
USB
SCART
POWER: Connect to the mains adaptor.
USB -For upgrade: For software upgrade only.
HDMI: Connect it to the HDMI of DVD or other equipment.
VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
PC-IN: Connect it to the audio output terminal of PC.
SCART: Connect them to the SCART video output terminal of DVD.(used in component source)
Headphone: Connect it to your headphone or other audio equipment.
Coax: Digital coaxial output.
Common Interface: CI slot.
RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
R/L in: Connect them to the audio output terminal of DVD.(shared with YPbPr)
VIDEO: Connect it to video output terminal of DVD.
YPbPr: Connect them to the YPbPr video output terminal of DVD.(used in
component source)
4
Remote Control
Remote Control
The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote
control may not work correctly if it is operated out of range or out of angle.
MUTE
POWER
FAV
FAV+
FAV-
ASPECT
SLEEP
NICAM
SUBPAGE
SIZE
TV/TXT
INDEX
R.VEAL
HOLD
INFO
INPUT
OK
MENU
EXIT
1
2
3
4
5
6
7
8
9
0
-/--
VOL
PICTURE
EPG
CH
SOUND
FREEZE
AUTO
POWER: Turn the TV on/standby.
MUTE: Press to mute the sound, press again or press VOL+ to
unmute.
FAV: Display the favourite program list.
FAV+: Add the program to the favourite program list.
FAV-: Remove the program from the favourite program list.
ASPECT: Press to change the display mode of the screen.
SLEEP: Standby timer.
NICAM: NICAM/A2.
SUBPAGE: For example to go directly to subpage 4:
press SUBPAGE, then 0,0,0,4; press SUBPAGE again
to cancel subpage mode.
SIZE: Press to see top half of page double size, Press again to
see the bottom half og page double size, Press again
for normal size.
TV/TXT: Turn off/on the Teletext display.
INDEX: Go to index.
R.VEAL: Reveal any hidden text, for example-quiz answer.
HOLD: Hold or carry on the current subpage.
INPUT: Press to display the input source menu.
INFO: Display brief information concerning the current channel
you are view.
Cursor left/right/up/down: Cursor buttons used in menus.
OK: CONFIRM BUTTON for menu.
MENU: System setup menu.
EXIT: Exit the OSD menu.
0-9,-/--: Choose channel directly.
: Return to the previous channel viewed.
LANGUAGE SUBTITLE TV/RADIO
5
Remote Control
Remote Control
MUTE
POWER
FAV
FAV+
FAV-
ASPECT
SLEEP
NICAM
SUBPAGE
SIZE
TV/TXT
INDEX
R.VEAL
HOLD
INFO
INPUT
OK
MENU
EXIT
1
2
3
4
5
6
7
8
9
0
-/--
VOL
PICTURE
EPG
CH
SOUND
FREEZE
AUTO
LANGUAGE SUBTITLE TV/RADIO
VOL+/-: Adjust the volume.
CH+/-: Scan through channels.
Colour buttons: short cuts-follow the coloured links in the text.
PICTURE: Select the picture mode.
SOUND: Select the sound mode.
FREEZE: Catch the picture of the current program.
AUTO: Auto adjust in the PC mode.
EPG: To show the Electronic Program Guide during no-menu
state only in DTV mode.
LANGUAGE: Select the language for the TV in DTV mode.
SUBTITLE: Turn on/off the subtitle display in DTV mode.
TV/RADIO: Change the state between DTV and RADIO in
DTV mode.
6
Basic Operation
Basic Operation
Power on/off
1. Connect to the power supply with a power code and an adaptor.
2. -To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
SOURCE
Press INPUT/TV/AV button on the TV set or remote control to display the
input source menu, and use CH+/- button on the TV set or ∧/∨ button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
DTV
ATV
AV
SCART
YPBPR
PC
HDMI
Signs on the screen
Mute
No signal
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Main menu: VIDEO AUDIO TV SETUP TIME OTHERS
Brightness
50
Picture Mode
Custom
Contrast
50
Color Temp
Normal
Saturation
50
NR
Sharpness
50
MPEG NR
Low
Cinema Mode
Low
Medium
Move ENTER Select Exit Exit
Submenu
(Video menu
for example)
Hint---you should operate
the OSD menu according
to the hint.
∨
∧
∨
∧
Use
/
button to select the main menu, and press ∨ button to enter the submenu.
In the submenu, use ∧ / ∨ / / button to select the function item, press OK button to enter
the adjust/setup menu.
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
7
OSD Menu
OSD Menu
1. Video menu
Brightness
50
Picture Mode
Contrast
50
Color Temp
Saturation
50
NR
Low
Sharpness
50
MP EG NR
Low
Cinema Mode
Low
Move
OK Select
Standard
Normal
EXIT Exit
Description
Adjust menu (Brightness menu for example)
∨
∧
Adjust menu: Press / button to adjust, and press ∧ / ∨ button to switchover between
Brightness, Contrast, Saturation, Sharpness.
Brightness: Adjust image black level.
Contrast: Adjust image contrast.
Saturation: Adjust image saturation.
Sharpness: Adjust the sharpness(Gray and invalid in VGA/PC mode).
Select menu (Picture mode menu for example)
Select menu: Press ∧ / ∨ button to select, and press OK button to confirm.
Picture Mode: Select your desired picture mode from Custom, Standard,
Mild, Vivid.
You may select the picture mode directly by pressing the PICTURE button
on the remote control.
Colour Temp: Select an optimum color temperature mode to suit your eyes
for viewing from Cold, Normal, Warm)
NR: If the broadcast signal received is weak, you can select the NR option
to reduce the video noise level between Off, Low, Medium and High.
MPEG NR: Select MPEG NR mode from Off, Low, Medium and High.
8
OSD Menu
OSD Menu
2. Audio menu
Volume
50
Sound Effect
Balance
0
SPDIF Output
Treble
50
Equalizer
Bass
50
Move
OK Select
Normal
OFF
EXIT Exit
Description
Volume: Adjust vollume.
Balance: Adjust the audio output between left and right speakers.
Treble: Adjust the level of the higherpitched sounds.
Bass: Adjust the level of the lower-pitched sounds.
Sound Effrct: Select the sound effect from BBE, SRS, Normal.
SPIDE Output: Select the Spide Ouput mode from Off, PCM, RAW.
Equalizer: Enter the Equalizer menu to adjust.
0
Equalizer
53
0
0
0
Customer
100 Hz 1K Hz
Move
OK Select
5K Hz
3K Hz 12K Hz
EXIT Exit
Select the Equalizer mode from Rock, Country, Jazz, Classical, Blue, Default and Customer.
Note: You could adjust by yourself when you select “Customer” mode.
9
OSD Menu
OSD Menu
3. TV menu(In ATV/DTV mode)
Program Edit
Auto Search
EPG
Manual Search
Move
OK Select EXITExit
Description
Program Edit: Enter the Program Edit menu as below:
Fav.
Service Type
ATV
Network
ALL
Press color key to edit
1
CATV1
6
CATV6
2
CATV2
3
CATV3
4
CATV4
5
CATV5
Lock
Skip
Rename
Delete
Swap
Move
Move
OK Select EXITExit
∨
∧
Service Type: Select the Service Type you want.
Network: Select the Network mode you want from All, Rowridge, Crystal Palace, Digita
Finland, Winter Hill.
Operation on the Program Edit menu:
After you select the Service Type and Network modes, you will see the program’s
information displays on the right side of the screen.
Rename: Select the program you want to rename by ∧ / ∨ button, and press RED button
on the remote control to start renaming the program, you should select the position by /
button and select the character you like on the position by ∧ / ∨ button. Press OK
button to confirm.
Delete: Delete the program you select by GREEN button.
Swap: Select the program you want to swap, and press YELLOW button, then select
the other program you want it to be swaped and press OK button to swap.
Move: Select the program you want to move, and press BLUE button, then select the position
you want the program to be moved to and press OK button to move.
10
OSD Menu
OSD Menu
Fav.: Press OK button to add the program to the favorite channel list, and press OK button
to cancel.
Lock: Press OK button to lock the channel, and you have to enter the code to view the
program. (Note: you should set the code in Parent control menu of OTHERS menu).
Press OK button to cancel.
Skip: Press OK button to skip the channel, and the channel will be skipped when you
scan the channels by CH+/- buttons, and press OK button to cancel.
EPG(Gray and invalid in ATV mode): To display the Electronic Program Guide in DTV mode.
Auto Search: Press OK button to enter the Auto Search select menu.
(*Needs 10 minutes for each search.)
Digital
Aerial
Analog
Cable
Select the Digital/Analog, and press OK button to start autoscan.
Note: 1. When auto searching, it will store the channel it found.
2. You could press MENU/EXIT button to cancel the auto searching, or it will
stop when all the frequency has been searched.
3. You should select Aerial/Cable to start autoscan in Digital mode.
75%
Found Channels
6
Analog
autoscan menu
430.23MHz
ATV
Press Key MENU or EXIT to stop searching
75%
Found Channels
6
430.23MHz
DVB-T
Digital-Aerial
autoscan menu
Press Key MENU or EXIT to stop searching
Network ID
41111
Frequency
362MHz
Symbol Rate
Demodulation
Auto
Auto
Service Type
All Services
Scan Type
Quick Scan
Start
Move
Digital-Cable
autoscan menu
OK Select EXITExit
Select the options for the cable autoscan, select “Start”, and press OK button to start
atuoscan.
8%
DVB-C
362.00MHz 6875kS/s 128QAM
Press Key MENU or EXIT to stop searching
11
Found Channels
6
OSD Menu
OSD Menu
Manual Search(in ATV mode): Press OK button to enter the Manual menu.
On
Color System
Auto
Frequency
49.78MHz
Signal Strength
Sound System
Store
B /G
Note: Press /
button to select.
∧
AFT
0
∨
Channel No.
2%
Channel No.: Select the channel you want to manual search.
Color System: Select the Color System for the channel.
Sound System: Select the Sound System for the channel.
AFT: Due to weak signals or a wrong antenna configuration, some of the channels may
not be turned to the best reception condition. AFT function allows you to fine tune
channel selected.
Frequency: Press /
button to search the signal.
Store: Press OK button to store the settings.
∨ ∧
12
OSD Menu
OSD Menu
4. SETUP menu
Denmark
Country
Setup Wizard
R eset
English
OSD Language
Audio Language
Teletext Language
English
Subtitle
Move
OK Select EXIT Exit
Description
Country: Select the Country in ATV/DTV mode.
OSD Language: Select the OSD language.
Audio Language: Enter the submenu and select the audio languages for the programs in DTV
mode.
Teletext Language: Select th Teletext language in ATV/DTV mode.
Subtitle: Enter the submenu and set the subtitle settings for the programs in DTV mode.
On
Subtitle
Subtitle Mode
Normal
Subtitle Language
Alt.Language1
English
Alt.Language2
Welsh
Alt.Language3
Gaelic
Move
OK Select
EXIT Exit
Subtitle: Turn on/off the subtitle display.
Subtitle Mode: Select the the subtitle display mode from Normal or Hard of Hearing.
Subtitle Language: Select the subtitle languages for the programs.
Setup Wizard: Turn on/off the setup wizard.
Customer Reset: Reset all the settings above.
13
OSD Menu
OSD Menu
5. Time menu
Time Mode
Auto
Sleep Time
Off
Current Time
WakeUp Timer
Move ENTER Select Exit Exit
Description
Time Mode: Select Time mode from Auto or Maunal.
Note: You should select Manual mode when you want to setting the Current Time below.
Sleep Time: Set the sleep time for the TV.
Current Time: Press OK button to enter the submenu and set the current time yourself.
WakeUp Timer: Press OK button to enter the submenu and set the wakeup timer for the TV.
Current Time
.
1
Move
Time
1
:
0
Date
AM
Operation for Time: Press
button to select.
2009 . 1
.
1
Move
OK Setect EXIT Exit
/
∨
2009 . 1
∧
Date
2009-01-01 Thu 01:00 AM
Time
1
:
0
AM
OK Setect EXIT Exit
to select the position you want to edit, and press ∧ / ∨
14
OSD Menu
OSD Menu
6. OTHERS menu
Screen Mode
Auto
Parent Control
PIP
Off
PIP Position
Blue Screen
Top Left
Off
Move
OK Select
EXIT Exit
Description
Screen Mode: Select the screen mode for the TV from auto, 16:9Wide, 16:9 Zoom,16:9 Subtitle,
4:3.
Parent Control: Press OK button and enter the code by the number buttons to enter Parent
Control menu(the original password is 8888).
Please Input Password
Parental Lock
Parental Rating
Off
4
Change PIN
Move ENTER Select Exit Exit
Move ENTER Select Exit Exit
Parental Lock: Turn on/off the Parental Lock function.
Parental Rating: Select the Parental Rating from 3 to 18.
Change PIN: Press OK button to enter the submenu and change the PIN code.
Note; You should enter the old code, then enter the new code twice to change the code.
Blue Screen: Turn on/off the blue screen function.
The background will be blue screen when there’s no signal.
PIP Function
PIP: Select the input source for the PIP window.
PIP Position: Select the PIP Position on the screen.
15
OSD Menu
OSD Menu
7. PC menu(In PC mode)
PC
V.Position
50
Auto Adjust
H.Position
50
Auto Phase
Phase
50
Reset
Clock
50
Move
OK Select
EXIT Exit
Description
V.Position: Adjust the vertical position of the picture.
H.Position: Adjust the horizontal position of the picture.
Phase: Adjust the phase of the picture.
Clock: Adjust the clock of the picture.
Auto Adjust: Auto adjust the PC/VGA settings.
Auto Phase: Auto adjust the phase of the picture.
Reset: Reset the PC/VGA settings to factory default.
16
Simple Troubleshooting
Simple Troubleshooting
If the display fails or performance dramatically deteriorates check the Display in accordance
with the following instructions.Remember to check the peripherals topinpiont the source of the
failure.
If the display still fails to perform as expected,connect your helpline for assistance.
No power
- Check all connections to the TV.
- Press either the power button or the Standby button on the Remote control.
No picture or sound
- Ensure that the TV is plugged in and the power is on.
- Ensure that the aerial is connected.
- Try a different programme.
Poor picture quality
- Check the aerial connections.
- Check that the channel is tuned in properly.
- Adjust the picture settings:brightness,colour,sharpness,contrast,hue.
- Make sure that the TV is not located close to electrical appliances that may emit radio
frequency interference.
No colour
- Adjust the colour setting.
- Check that the programme is broadcast in colour.
- Check that the cannel is tuned properly.
TV does not respond to remote control
- Check that there are no obstructions between the remote control and the unit.
- Check that the remote control is within range of the unit.
- Check that the batteries in the remote control and not weak or exhausted.
This LCD TV is for household use and registered as harmless on electromagnetic waves.
Therefor,you can use it in every location as well as residential areas.
17
Electric and electronic equipment and included batteries contains materials, components
and substances that can be hazardous to your health and the environment, if the waste
material (discarded electric and electronic equipment and batteries) is not handled
correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can
symbol, seen below. This symbol signifies that electric and electronic equipment and
batteries should not be disposed of with other household waste, but should be disposed of
separately.
As the end user it is important that you submit your used batteries to the approriate and
designated facility. In this manner you make sure that the batteries are recycled in
accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and
batteries can either be submitted free of charge at recycling stations and other collection
sites, or be collected from the households. Additional information is available at the
technical department of your city.
Download PDF