ZILO
assemblyINSTRUCTIONS
ZILO
assemblyINSTRUCTIONS
Components
Backrest
Seat
Armrest
M8X35 3EA
Starbase
Gas spindle/
caster
Tilt
M6X32 6EA
Bolt kit
M6X16 4EA
Assembly
Note: You may choose to start with installing the seat cover – instructions on last page.
Step 2
Step 1
Attach the armrest to the seat shell
using 6pcs M6x32 bolts (1) and tighten
the 4pcs M6x16 screws (2).
Step 3
Insert the castors onto the leg base
(1), then insert gas lifter onto the top
of leg base (2).
1
2
Attach the backrest with seat
mechanism using 3pcs M8X35
allen key bolts, and tighten the
4pcs M6x16 screws.
Step 4 Combine chair body with gas
lifter via the hole on the mechanisim.
ZILO
assemblyINSTRUCTIONS
Changing Removable Seat Covers
Step 1 Pull the seat forward while pushing
Step 2 Unzip the zipper on the back side
the lever under the seat. Tear off both sides of
velcro and detach the seat from the chair body.
and remove seat cover from the seat shell.
Install new seat cover and zip to close.
764 Walsh Avenue / Santa Clara, CA 95050 (877) 801-0370 amqsolutions.com