Profitable speed increase,
new print head technology
Advanced functionalities that
put you ahead
Developed for your needs
Print up to 30 sqm/h, 70% faster than JV33-260
JV33-260
JV34-260
Around
2 inches
1 inch
(25.4mm)
Media feeding direction
High speed printing with
around 2 times the width
as the conventional
printing width
Media feeding direction
Two newly developed high tech
print heads in staggered
arrangement achieve a maximum
speed of 30 sqm/h.
Benefit from a fast return on
investment due to increased
productivity and a very
accessible price.
By producing dots in three
different sizes, smooth
high resolution graphics
are created without a
grainy appearance.
Variable dot
technology
Media up to a roll weight of 100 kg is securely controlled. Mimaki's AMF (*1)
maintains optimum tension even on long jobs. Smaller media are supported by the
standard small take-up device that comes with the printer thus enabling full control of
all substrates sizes.
*1 AMF (Automatic Media Feeder)
Continuous ink supply
Employ Mimaki's UISS (*2) for continuous ink supply. When one ink cartridge runs
out of ink, the indicator will light up red, while the system switches automatically to
the second cartridge of the same color thus enabling long unattended printing.
Optionaly Mimaki's MBIS (*3) employing 2 l ink containers in combination with
Mimaki's UISS reduces your environmental footprint even further.
*2 UISS (Uninterrupted Ink Supply System)
Small take-up device
AMF
*3 MBIS (Mimaki Bulk Ink System)
UISS
MBIS
A triple stage heater -before, during
and after printing-improves the
performance of ink and enables fast
drying for high-speed printing.
Automatic
drying fan
In combination with the 3 stage intelligent
heater, an automatic drying fan is employed
for even more streamlined work. Thus even at
high-speeds all media is dried thoroughly so
that it can be wound up immediately.
■Specifications
Item
JV34-260
On-demand Piezo head (Array of 2 staggered print heads)
Head
2,632mm(103.6”)
Maximum width
540, 720, 1,440 dpi
Print resolution
29.9㎡/h(540×720dpi, 4pass, bi-directional)
Print speed High speed
21.4㎡/h(540×1,080dpi, 6pass, bi-directional)
Standard
13.2㎡/h(540×1,440dpi, 8pass, bi-directional)
High quality
SS21 (4 colors: C/M/Y/K)
Ink
Solvent ink
Sublimation ink(*1) SB52 (4 colors: BL/M/Y/NK)
Ink supply system
440 ml ink cartridge: 2 x per color (880 ml ink/color)
MBIS (2 l ink container): 2 x per color (4 l ink/color)
Media
210mm∼2,642mm (8.2”∼104.0”) 210mm∼1,620mm (8.2”∼63.9”) (narrow take-up device)
Size
100kg (220 lbs.)
Weight
25kg (55 lbs.) (narrow take-up device)
φ250mm (9.8”)
Roll diameter
φ180mm (7.0”) (narrow take-up device)
Inside roll diameter 3 inch
2-3 inch (narrow take-up device)
Inside/outside
Print aspect
Media cutter
Y-direction cutter after head section
Media heater
3 stage intelligent heater (pre/print/after)
Media dryer
Post-heating and automatic drying fan
Interface
USB2.0
Applicable standard
VCCI class A, FCC class A IEC60950,
CE Marking (EMC pass, voltage and machine), CB Report
Power specification
Power consumption
Operational environment
Dimensions (w)x(D)x(H), weight
AC100∼120V±10%, AC220∼240V±10%, 50/60Hz±1Hz
2 x less than 1,440W
Temperature: 20°
C-35°
C (64-95 °
F); Humidity: 35-65 % RH (non condensing)
3,650×1,302×1,424mm (143.7”
×51.3”
×56.1”)/465kg (1,025 lbs.)
Print
head
Print heater
Pre-heater
Media
Post-heater
Head height can be adjusted to either 2 or 3 mm according to the
media thickness. For sublimation printing, head height adjustment
of either 3 or 4 mm is available(*4).
Head height
adjustment
*4 Adjustment needs to be carried out by service personnel.
One printer - different inks
Waterbased sublimation ink as well as solvent ink (*5) can be used in JV34-260
enabling a wide variation of applications including signage / signs, flags, banners,
sublimation printing for polyester etc.
*5 Ink type must be chosen at time of installation.
Sublimation printing corresponds to printing on transfer paper.
Solvent Ink SS21
When one ink cartridge runs out of
ink, the indicator will light up red,
while the system already switches
automatically to the second
cartridge of the same color
■Image of variable dot
Smooth gradations even when printing in four-color-mode!
3 stage
intelligent
heater
Unattended continuous printing increases your productivity
Continuous and stable media conveying
■Image of non-variable dot
ink
Superior adhesion to media and
resistance characteristics paired with
brilliant color reproduction for high
speed printing.
■Supplies
Sb52
ink
Suitable for printing on transfer paper for
polyester substrates. Its high density results in
excellent and outstanding coloration of the final
product.
Item No
Item
SS21 Solvent ink
Sb52 dye sublimation ink(*1)
Wiper kit 33S
Waste ink bottle (2L)
Cutter blade assy
MS cleaning cartridge
Head cleaning cartridge
■Options
Dye Sublimation Ink Sb52
440ml
2L(*2)
440ml
2L(*2)
10 pieces
1piece
1piece
220ml
220ml
Item
MBIS (Mimaki Bulk Ink System)
Rear fan unit 260
LED unit 260
Static-cling prevention sheet kit 260
SPC-0501 C-2/M/Y/K-2
SPC-0588 C-2/M/Y/K-2
SPC-0584 BL-2/M/Y/NK
SPC-0585 BL-2/M/Y/NK
SPA-0134
SPA-0117
SPA-0107
SPC-0294
SPC-0188S
Item No
OPT-J0242
OPT-J0206
OPT-J0207
OPT-J0209
*1 Sublimation ink will be announced in the near future
*2 liter ink packs can be used with the bulk ink system.
Output RIP software
is included
Maximum print width 2,632 mm
DB10301-01