Wohnungslüftungssysteme
Home Ventilation with Heat Recovery
Wärmerückgewinnung
Heat Recovery
energy-efficient
Controlled
Systems with
Systems with HR
We need fresh air to be able to live healthy lives. We do not feel well
and may even fall ill without it. Fresh air is therefore essential for us
- and just as well for our four walls. But how can we make sure that
our house is sufficiently ventilated when we're traveling so often?
How can we also ensure that our home stays nice and warm, so we
feel comfortable and do not waste valuable heating energy? With
decentralised domestic ventilation systems with heat recovery from
LUNOS that's no problem.
For this purpose LUNOS has developed various units: The e² family
consisting of the well-known e², the e²mini and e²short, and now
the new e²neo. They are preferably installed in living rooms and
bedrooms, whereas the ego is employed in exhaust air rooms such
as bathrooms and kitchens. Here the brand new Nexxt from LUNOS
falls into line. It provides ventilation no longer only for domestic
rooms with decentralised systems, but now also hotels, hospitals
and schools can be equipped by LUNOS.
Ventilation systems with heat recovery are particularly efficient and
provide fresh air and a pleasant living environment in every room.
For supply and exhaust ventilation, all rooms of the apartment or
house can be equipped with heat recovery devices.
You will find all the information you need in this brochure about the
technical details and possible applications - and we will be happy to
answer any question you may have.
› e² with LUNOtherm
ego
ego
Nexxt
e2
02
Home Ventilation
heat recovery
› Supply & exhaust air with HR
e², e²neo, e²short
Axial outer wall fans with regenerative heat recovery for living
rooms and bedrooms, combinable with LUNOtherm.
ego
Axial outer wall fan with regenerative heat recovery for functional
rooms.
Nexxt
Radial outer wall fan with recuperative heat recovery for living
rooms, bedrooms and functional
rooms. Wall duct via 160 walltube.
e²mini
The principle of regenerative heat recovery
The ego is the perfect enhancement to the e2 family in a ventilation system with heat recovery. By reason of the decentralised
alignment, the individual ventilation devices can be used exactly
where they are required.
Except for the e2mini, the e2 family can also be combined with
the LUNOtherm façade element. When using the façade element the outer grille is not required. What remains is a narrow
ventilation gap in the reveal or in the lintel.
The Nexxt with recuperative
heat recovery
The Nexxt makes it possible to provide ventilation and air exhaust
in large rooms with just one device. Two extremely quiet radial
fans achieve up to 110 m3/h. You can choose between two versions with crossflow or counterflow heat exchanger.
Living rooms and bedrooms:
The Nexxt and the e2 family are ideally suited for use in living
rooms and bedrooms.
Axial outer wall fan with regenerative heat recovery for living
rooms and bedrooms.
Bathroom, WC, utility room (UR) and kitchen:
9/MRD
The ego is used for functional areas such as bathroom, WC, utility
room and kitchen. Thanks to the two separate air channels in one
unit, a second fan is not required here. The ego can be operated
both in heat recovery operation and in the exhaust air mode (airflow level 45 m3/h).
Wall installation housing to hold
the 160 wall-tube.
H x W x D in mm:
240 x 210 x 500 mm.
e², e²neo und e²short
+ LUNOtherm
Also LUNOS supports the objectives of the Federal Republic of
Germany concerning the energy turnaround, and so our systems
are of course eligible due to their high heat provision level and
their high efficiency. Detailed calculations are available from your
energy advisor.
e² with façade element, almost
invisible from the outside
03
Home Ventilation with
Nexxt, the evolution
Nexxt
› The LUNOS Nexxt - the new diversity in decentralised ventilation
With the new Nexxt E, LUNOS has added a device with enthalpy
heat exchanger to the Nexxt series. As a result, there are now three
different Nexxt ventilation units available for a variety of applications. The Nexxt is a decentralised heat recovery unit that is used in
kindergartens, schools and offices, hotels and doctors' offices and
of course, classically, in apartments and homes. In areas or high
altitudes where wind loads are extreme, the Nexxt is just as well
suited as in areas where high sound insulation is required. Through
the optional use of a F9 filter, the Nexxt exceeds all standards of
hygiene requirements many times over. The Nexxt achieves a heat
recovery rate of up to 90%. The heat transfer takes place through an
enthalpy heat exchanger, a counterflow heat exchanger or, optionally, through a crossflow heat exchanger. A completely new operating concept complements the Nexxt. A control system located
behind an elegant veneer ensures that, when activated, a subtle but
clear feedback is provided by backlighting. By default, the Nexxt is
controlled by humidity and temperature sensors. The Nexxt is available in a surface-mounted and a flush-mounted version. By means of
its chic design frame, the surface-mounted version of the installation
housing can also convince by its visual appearance. The well-known
160 wall-tube is used for the outward air passage.
› Heat recovery with enthalpy heat exchanger
The newly developed Nexxt E with enthalpy heat exchanger ensures that the ambient air is rewetted by the supply air in the event of condensate formation. This has the advantage that almost no condensate escapes from the heat exchanger and icing-free operation remains
possible up to the lowest temperatures. Especially in winter with very dry outside air, rewetting ensures a high degree of well-being, as it
keeps the indoor air from getting too dry and thus prevents the mucous membranes from drying out.
› Two-channel outer hood with insect screen
› Housings for surface and flush mounted available
› Optimised ec radial fans for lowest running noise
› Replaceable pocket filters for filter classes M5, F7 and F9 available
› Wanddurchführung
mit 160er Rundkanal,
elektrisch schließender
Klappenverschluss optional
› Integrated control with humidity and temperature sensors, can be extended with further sensors
› Heat exchanger available in
two versions
› Inner screen with control
panel and filter change
indicator
04
Heat Recovery
in the decentralised system
QUIET
›
Low noise level thanks to ec technology
While the well-known e2 with its axial ec technology has already achieved top ratings, the radial ec
motors of the Nexxt are convincing all along the line. Nestled in a flow-optimised EPP chassis, the ec
motors, which are already very quiet, are virtually "silenced". Thereby, the Nexxt is currently one of the
quietest units in its class.
ECO-FRIENDLY
› Efficiency
Thanks to its very low power consumption, the Nexxt is very energy-efficient, thus making an active
contribution to environmental protection. The highly efficient ec technology enables a low power
consumption.
INNOVATIVE
› Heat recovery & control technology
The key component of the Nexxt is the built-in device with heat exchanger, which is available in two
versions:
NXT-E: The new enthalpy heat exchanger, based on a crossflow heat exchanger, provides a rate of up to 83% heat recovery. In addition, the mode of operation of the heat exchanger ensures largely icing-free operation.
NXT-G: The counterflow heat exchanger achieves heat recovery levels of up to 90 %.
NXT-K: The crossflow heat exchanger achieves heat recovery levels of up to 80 %
The integrated control provides for perfect interaction of the various components. Equipped with
humidity-temperature sensors, even the standard version of the automatic control ensures efficient
ventilation with humidity protection. Optional sensors such as, for example, the CO2 sensor can be
integrated or connected by the bidirectional LUNOS radio technology.
SLIM
w
COMPATIBLE
› LUNOS design line
The Nexxt adds the waveform to the current design language of LUNOS products while maintaining
its basic principles and recognition value. With an inner screen size of 510 x 510 mm, the fan thus
remains a stylish element of home technology. The front screen also contains the plainly designed
control panel. The total depth of 240 mm can be lowered up to 67 mm into the outer wall.
› LUNOS compatibility
By using the 160 LUNOS standard wall-tube as wall duct, the Nexxt is compatible with the fans of the
160 series. Only for the outer covering a two-way outer screen or outer hood must be used. In the
surface-mounted version, it is particularly easy to replace a 160 fan by the Nexxt.
UNIVERSAL
› The Nexxt-housings can be used universally
Developed for the outer wall, the fan can be installed in the surface-mounted or flush-mounted version. The flush-mounted version requires a wall thickness of at least 240 mm.
Tested according to EN 13141-8
Conforming to standards: All device data of the ErP product
data sheet and the energy labels have been determined
according to EN 13141-8
BEST OF
05
Nexxt
The modular system
NEW
Nexxt modular system
› Functions
In both versions of the built-in device, the Nexxt is equipped as
standard with humidity-temperature sensors both on the supply air and the exhaust air side. Thereby, the rooms are always
ventilated automatically and in accordance with the respective
requirements. Manual intervention is not necessary. For additional
sensors and the radio module 5/FM there are slots available on the
•
•
•
•
•
•
control board. The Nexxt can be integrated into a bidirectional
LUNOS wireless network via the radio module and thus receive information from external sensors. In addition, a WiFi module will be
available by which the Nexxt can be remotely controlled via WLAN.
There are two inner screens for the operation of the Nexxt available
for your selection. They are equipped with the following functions:
Airflow levels adjustable: Nexxt E and Nexxt K 15-110 m³/h and Nexxt G 15-90 m³/h
Automatic: Activation of the humidity-temperature control
Summer mode: The humidity-temperature control automatically switches the fan down to a lower step
Anti-freeze function: The airflow level is reduced to prevent freezing of the heat exchanger
Filter change indicator
Filters meet the highest quality standards: M5 filters, F7 filters or F9 filters are available
Eigenschaften
Nexxt E
Nexxt G
Nexxt K
Average thermal efficiency
level*
73 %
84 %
62 %
Air flow
15-110 m³/h
15-90 m³/h
15-110 m³/h
Power consumption**
22 Watt
20 Watt
22 Watt
Supply voltage
200-240 V / 50/60 Hz
115 V / 60 Hz US version
(available on request)
200-240 V / 50/60 Hz
115 V / 60 Hz US version
(available on request)
200-240 V / 50/60 Hz
115 V / 60 Hz US version
(available on request)
Sound power level**
40 dB(A)
39 dB(A)
40 dB(A)
Core hole drilling
162 mm
Minimum wall thickness
(surface mounting/flush
mounting)
110 mm / 280 mm
Depth in wall installation
172 mm housing + 105 mm flap closure in wall duct
Cutout installation housing
min. 482 mm x 482 mm
Dimensions of the unit
480 mm x 480 mm x 170 mm
Size of the inner screen
510 mm x 510 mm x 66 mm
Size of the outer hood
235 mm x 205 mm x 72 mm
Energy efficiency class
* according to EN 13141-8
** at 70 % of the maximum airflow volume, according to ErP Directive EU Regulation 1254, measured with M5 filters.
06
for the perfect fan
› Configuration Nexxt
The modular system of the Nexxt enables easy combination of the various components with the two built-in devices.
Five components are required to complete one fan. One product needs to be chosen for each component, so that
the selection is complete:
NEW
* An adapter is required pear each 10 cm wall-tube or part thereof
Electric flap closure
The electric flap closure 9/KVEN-2 for the Nexxt based on the 160 pipe is available as an option.
It can be used to close the wall duct automatically if required.
07
e neo
2
Home Ventilation with
e²neo
e²neo
› The e2neo - the reference in reverse technology
LUNOS works according to the principle of continuous improvement - this is how the e2 was revolutionised: the new e2neo works
from an extremely quiet operation of 5 m3/h. This was made possible by a the development of a new motor with a significantly reduced operating noise, which can be controlled even more finely.
Therefore, the e2neo is not only quieter than the successful e2
generation, but also more efficient. The approved and reliable
effectiveness of the e2 has, of course, been retained.
› Outer grille with insect screen and façade
protection ring,
› EPP-heat insulation elements with 0,038 W/mK
› Highly efficient ceramic heat store with a
heat provision level of 82,6 %
› Sound-optimised fan unit with
newly developed ec motor
› Flow-optimised inner screen
with washable G3 filter
› All 160 fans of the e2 family can be combined
with the new inner screens of the 160 series
08
Heat Recovery
from the e2 family
Reverse technology: The heat recovery of the e2 family for residential rooms
All fans of the e2 family work according to the method of regenerative heat exchange. In reversing operation, a storage element
charges up with thermal energy similar to a rechargeable battery
and transfers the heat to the incoming outside air. e2 fans are prefer-
QUIET
ably used in living rooms. There are always two devices running
in paired operation, so that an even number of fans needs to be
installed for the e2s to function properly.
› Modern ec technology and motor control
The EC motor of the e2neo has been tuned even more finely to reverse technology requirements. The
result is an even more precise control of the ventilation steps and an optimised change of air direction.
The revised fan blades enable even lower running noises.
ECO-FRIENDY
› Efficiency
With the lower power consumption of its ec motor, the e2neo has a particularly high efficiency thus
ensuring significant energy savings in the heat supply. The e2neo thus achieves energy efficiency class
A according to the ERP directive.
INNOVATIVE
› Heat recovery
The compact heat store made of a ceramic composite material provides a heat provision level of more
than 80 %.
SLIM
› Small dimensions
In its class, the e2neo is among the world's smallest fans in decentralised home ventilation with heat
recovery. The small, flat inner screens have approximately the size of a CD.
COMPATIBLE
› Compatibility with other devices
If a LUNOS ventilation system has already been installed, an existing fan of the 160 series can be
replaced by the e²neo. This is possible by the use of the same wall duct.
UNIVERSAL
› Versatile installation options
All fans of the e2 family can be used in new buildings as well as in modernisation work. In new buildings
they are placed between the bricks by use of a wall installation housing. In modernisation work they are
installed by means of a 162 mm core hole drilling. The wall must to be at least 280 mm thick.
160
09
e
2
Home Ventilation with
e², e²short & e²mini
e², e²short & e²mini
e²
› Outer grille with insect
screen and façade protection ring
The classic one: proven and
efficient for use in living
rooms and bedrooms.
160
› Highly efficient ceramic
heat store
› EPP-thermal insulation elements with 0,038 W/mK
› Super-silent fan unit in
sound-absorbing EPP-chassis
› Flow-optimised inner screen
with washable G3 filter
e²short
The short one: for narrow
outer walls from 200 mm
wall thickness
160
e²mini
The small one: for confined
space conditions, from
167 mm to maximum 300 mm
wall thickness
100
10
Heat Recovery
from the e² family
› The classics of the e2 family, three fans for all application purposes
No fan has characterised decentralised ventilation with heat recovery as strongly as the LUNOS e2. It is universally applicable and can
be used even for high sound protection requirements. The e2short
QUIET
and e2mini were developed for an even more flexible application
range of the e² family. Thanks to these two fans even very narrow
walls can be equipped with efficient ventilation devices.
› Low noise level thanks to ec technology
Highly efficient motors with the state-of-the-art ec-technology combined with flow-optimised and
specially balanced fans have eliminated nearly all running noises. The result is a low self-noise level.
ECO-FRIENDLY
› Efficiency
Due to their very low power consumption, e², e²short and e²mini are particularly energy-efficient. The
units thus achieve very good energy efficiency classes.
INNOVATIVE
› Heat recovery
The units of the e² family have a very low energy consumption. Using state-of-the-art production
methods, LUNOS succeeded in developing a compact heat store of a ceramic composite material,
which provides a heat recovery rate of up to 90 %.
SLIM
› Small dimensions
The e²mini belongs to the smallest decentralised fans in the field of home ventilation with heat
recovery. The 160 fans e² and e²short are extremely compact in their class and convince by their small
dimensions.
COMPATIBLE
› Compatibility with other devices
If a LUNOS ventilation system has already been installed, an existing fan of the 160 series can be
replaced by the e²neo, e² and e²short. This is possible by the use of the same wall duct.
UNIVERSAL
› Versatile installation options
In new buildings as well as modernisation work, all fans of the e² family can be used. In new buildings
they are placed between the bricks by use of a wall installation housing. In modernisation work they
are installed by means of a 162 mm or 100 mm (e²mini) core hole drilling.
11
Home Ventilation with
e
2
Technical data
Technical data
› Characteristics
e2neo
QUIET
Measuring surface sound pressure level*
(Sound power level)**
From 11 dB
(38 dB)
ECO-FRIENDLY
Power consumption
From 0,3 W
INNOVATIVE
Average thermal efficiency level
Heat provision level according to scavenging air procedure: 82,6 %
SLIM
Dimensions
Fan size:
Ø 154 x 243 mm
COMPATIBLE
Compatibility with other devices
All 160 systems incl.
LUNOtherm and outer
hoods as external closure
UNIVERSAL
Versatile installation options
Usable in new buildings and
modernisation work, wall
thickness from 280 mm
Definitions for sound:
* Measuring surface sound pressure level: indicates how high the sound pressure level is on a measurement surface (hemisphere) around the inner screen of a fan in 1 m distance. The higher the value, the louder is the unit. This value cannot be measured directly, it is a calculated value.
** Sound power level: At 70 % of the maximum airflow according to (EU 1253/1254/2014). The sound power level indicates the "loudness" of a device and is independent of the
distance.
12
Heat Recovery
of the e² family
e2
e²short
e²mini
From 17 dB
(40 dB)
From 17 dB
(40 dB)
From 18 dB
(40 dB)
From 1,4 W
From 1,0 W
From 0,6 W
Heat provision level according to scavenging air procedure: 90,6 %
Heat provision level according to scavenging air procedure: 82.7 %
Heat provision level according to scavenging air procedure: 74.4 %
Fan size:
Ø 154 x 243 mm
Fan size:
Ø 154 x 168 mm
Fan size:
Ø 98 x 160 mm
All 160 systems incl.
LUNOtherm and outer
hoods as external closure
All 160 systems incl.
LUNOtherm and outer
hoods as external closure
Compatible with wall-tubes
with an inside diameter of
100 mm
Usable in new buildings and
modernisation work, wall
thickness from 280 mm
Usable in new buildings and
modernisation work, wall
thickness from 200 mm
Usable in new buildings and
modernisation work, wall
thickness from 167 mm to
max. 300 mm
13
e
Home Ventilation with
go
ego: Ventilation
ego
› The ego - reverse technology for exhaust air rooms
LUNOS developed the ego for optimum ventilation with heat
recovery in bathrooms, WCs and kitchens.
Paired operation is not required, because in an ego two small fans
provide air supply and exhaust air with heat recovery at the same
time.
› Weatherproof outer screen with
separate airflows and insect screen
› Highly efficient ceramic heat store with
a heat provision level of 81.4 %
› Quiet fan units in counterflow
arrangement for simultaneous
supply and exhaust ventilation
› Flow-optimised inner screen with separate
supply and exhaust air vents and washable
G3 or pollen filter
160
› On the façade side combinable
with the new two-way outer hoods
14
Heat Recovery
in functional rooms
Function of the reverse technology in exhaust air rooms
Like the all fans of the e² family, the ego uses the principle of regenerative heat exchange. However, the ego uses two fans operating
in opposite direction so that supply and exhaust air are moved at
the same time. A second device is not required for operation. Addi-
QUIET
tionally, the system can be switched to an exhaust mode in which
an airflow level of 45 m³/h is removed to quickly allow fresh air to
flow into a room.
› Low noise level thanks to ec technology
Highly efficient ec motors with flow-optimised fans ensure low
running noises. This results in low sound values. Indication of the
enveloping surface sound pressure level* (sound power level)**
ECO-FRIENDLY
› Efficiency
From 17 dB
(47 dB)
From 1,0 W
The very low power consumption ensures high energy-efficiency.
The ego thus achieves the energy efficiency class B.
INNOVATIVE
› Heat recovery
The compact heat store made of a ceramic composite material with
an extraordinary honeycomb structure provides a high thermal efficiency.
SLIM
› Small dimensions
The ego belongs to the worldwide smallest fans in home ventilation
with heat recovery in the class of two-way devices.
COMPATIBLE
› Compatibility with other devices
If a LUNOS ventilation system has already been installed, an existing
fan of the 160 series can possibly be replaced by the ego.
UNIVERSAL
› Versatile installation options
The ego can be used in new buildings as well as in modernisation
work. In new buildings it is placed between the bricks using a wall
installation housing. In modernisation work it is installed by means
of a 162 mm core hole drilling - minimum wall thickness: 300 mm.
Heat provision level according to scavenging air procedure: 81.4 %
Fan size:
Ø 154 x 300 mm
Only when using ego inner
screens and two-way outer
screens
Usable in new buildings and
modernisation work, wall
thickness from 300 mm
Definitions for sound:
* Measuring surface sound pressure level: indicates how high the sound pressure level is on a measurement surface (hemisphere) around the inner screen of a fan in 1 m distance. The higher the value, the louder is the unit. This value cannot be measured directly, it is a calculated value.
** Sound power level: At 70 % of the maximum airflow according to (EU 1253/1254/2014). The sound power level indicates the "loudness" of a device and is independent of the
distance.
15
LUNOS Ventilation
for ventilation with heat recovery
NEW
Gesture control
› LUNOS controls
Gesture control
NEW
Smart Comfort
Ventilation by one gesture - the new gesture control provides fresh air with the familiar LUNOS equipment standards, such as humidity-temperature control, frost protection and automatic operation as
well as various comfort functions. The LUNOS 5/GS has a touch-sensitive panel, which can also be activated - contactlessly - by different gestures. Below the touch unit, there are 60 RGB LEDs, which provide
feedback during operation and signal activated functions and states in an easily understandable way.
Universal controls, Nexxt and/or Silvento devices can optionally be connected to the two outputs of the
gesture control. These two control paths or channels can be controlled separately so that two different
fan types can easily be controlled independently of each other. This means that the entire ventilation
system of a residential unit can be operated via one control.
Ventilation at the touch of a button - exactly as needed. The Smart Comfort Control is particularly
easy to operate. The different ventilation modes can now be set directly at the touch of a button. This
includes, of course, the humidity-temperature mode recommended for continuous operation. In this
ventilation mode, the ventilation system works particularly efficiently and keeps the room climate at
an optimum level. The Smart Comfort can control all 12-volt fans from LUNOS.
• Humidity temperature sensor and filter change indicator
• Automatic humidity control, intensive ventilation, night-time reduction and summer
ventilation can be selected
• Functions for moisture and frost protection
Universal control
With the Universal Control 5/UNI-FT, everything can be controlled automatically. It is equipped as
standard with humidity temperature control and a delay timer module and can also be switched to
summer mode. The universal control is a multifunctional 12 volt control that can be operated with a
simple two-pole series switch.
• Humidity temperature control and filter change indicator
• Integrated delay time with interval operation
• Radio module connectable
› The Touch Air Comfort (TAC)
This control is the multi-talent from LUNOS. Both the 12 V fans of the 160 series and the Silvento ec
can be connected directly. Alternatively, almost any number of fans can be connected via universal
controls, which can be operated via the TAC. Additionally, LUNOS 230 V fans can also be easily connected using the additional module 5/ACM.
The TAC can be configured for various fan scenarios. It proves to be an energy-efficient combination
artist: Either different fans, the 230 V module 5/ACM for Silvento AC or individual universal controls are
connected to the three outlets of the control.
16
Control Systems
and assessories
Radio Products & assessories
› Bidirectional radio technology
Remote control RC-EO
The RC-EO remote control is maintenance-free, shock-resistant and splash-proof, making it suitable
for all areas of everyday life. Connected to the UPM-EO module, all connected 230 V devices can be
controlled by radio command.
Flush-mounted module UPM-EO
The flush-mounted module UPM-EO is a receiver for radio signals. In particular, during refurbishment
manual operation of the fan can be enabled retroactively without the need for complex cable laying.
External humidity and temperature sensor SFT-EO
This external sensor can be installed almost anywhere and does not require any additional power
supply. As an indoor and outdoor sensor, the intelligent controller adjusts the ventilation according to
the measured values.
Radio module for the universal control UNI-EO
The radio module for the universal control enables communication of the universal control unit
5/UNI-FT with the coupled LUNOS wireless components. This includes the processing of received
sensor values and switching commands, as well as the transmission of system states.
Radio module for Silvento ec and Nexxt FM-EO
In connection with e² fans at a universal control with UNI-EO module, sensor values can be exchanged
and the ventilation operation of the systems can be coordinated.
› Smart ventilation with LUNOS and homee
homee
Brain Cube
EnOcean Cube
homee is a modular Smarthome center that enables the linking of various trades and technologies.
The user is provided with a clearly structured and easy-to-use interface in the form of an app for iOS
and Android or as a WebApp. The center is the white "Brain-Cube", which already has a WLAN interface
as standard both providing the connection to the Internet and implementing communication with
WLAN-capable Smarthome devices. The EnOcean Cube is required to integrate and control LUNOS
specific radio modules in homee. LUNOS and homee make proper ventilation not only easy, but also
smart. https://hom.ee/
› Accessories for Touch Air Comfort (TAC)
CO2 -Module
Permanent measurements of the CO₂-values enable the TAC to control the fans according to the
air quality. The control range is adjustable, which allows fine-tuning towards various room conditions.
The CO₂ program can be set concurrently with the humidity-temperature program. The
automatic function will then react to the requirement that occurs first.
Designation: SCO2-TAC
17
Accessories
160 screens,
Accessories
› The new comfort inner screens for the 160 series
Comfort inner screen
Thanks to the new design the direct noise input to the residents is reduced - the result is a more
comfortable ambiance. The glass version of the new screen also stands out by its elegant design.
Plastic design
Designation: 9/IBK (H x W x D) 191 x 180 x 60 mm
Glass design
Designation: 9/IBG (H x W x D)) 197 x 185 x 66 mm
› Inner screens for the 160 series
Standard inner screen
Designation: 9/IBE (H x W x D) 180 x 180 x 35 mm
Noise protection inner screen
Sound insulation hood 9/IBS: increase of the standard sound level difference by up to 9 dB, reduction
of self-noise, including washable filters of filter classes G2 and G3 1 pc each.
Designation: 9/IBS * All inner screens are lockable
18
(H x W x D) 250 x 250 x 78 mm
outer grilles and wall ducts
› Outer grilles and screens for 160 systems
Plastic grille Ø 180 mm
Outer hood aluminium
for wall-tubes Ø 160 mm
NEW with façade protection ring, claw fixing
and insect screen
Designation: 1/BE 180 sanded
Designation: 1/WE 180 white
Designation: 1/AZ 180 anthracite
(H x B x T) 235 x 205 x 72 mm
For wall-tubes Ø 160 mm, insect screen,
with sound insulation, to screw on.
Increase of standardised sound level
difference by up to 6 dB.
Designation: 1/HWE white powder-coated
Designation: 1/HAZ anthracite powder-coated
Two-way outer screen, plastic
Two-way outer hood, aluminium
For wall-tubes Ø 160 mm, insect screen,
with sound insulation, to screw on.
Designation: 1/EGA
(H x W x D) 217 x 257 x 63 mm (H x W x D) 235 x 205 x 72 mm
For wall-tubes Ø 160 mm, insect screen, with
sound insulation, to screw on. Increase of standardised sound level difference by up to 6 dB.
Designation: 1/HWE-2 white powder-coated
Designation: 1/HAZ-2 anthracite powder-coated
LUNOtherm Façade Elements
Variant diversity available with insulating
thickness of 60–300 mm
160 series with LUNOtherm A
W x H: 980 x 490 mm
Application in non-combustible ETICS
160 series with LUNOtherm A FS
W x H: 980 x 505 mm
For mounting below the window.
Application in non-combustible ETICS
160 series with LUNOtherm B
W x H: 1000 x 500 mm
Application in flame-resitant ETICS.
LUNOtherm B FS
W x H: 1000 x 515 mm
Application in flame-resitant ETICS.
For mounting below the window.
› Wall installation housing for the 160 series
9/MRD
Wall installation housing made of EPS with a
slope towards the outside. Suitable for all devices
of the 160 series. Can also be used with LUNOtherm. Steplessly shortenable.
Designation: 9/MRD
(H x W x D) 240 x 210 x 500 mm
› Wall-tubes for the 160 series
Wall-tube
for all devices of the 160 series (can also be used
with LUNOtherm)
Designation: 9/R 160-500 (Ø x L) 160 x 500 mm
Designation: 9/R 160-700 (Ø x L) 160 x 700 mm
19
Telephone +49 30 362001-0
Telefax +49 30 362001-89
info@lunos.de · www.lunos.de
energy-efficient
P056114 02.18
LUNOS Lüftungstechnik GmbH
für Raumluftsysteme
Wilhelmstraße 31 · 13593 Berlin
Post Box 20 04 54 · 13514 Berlin
Germany