Cisco 2800 Series Integrated Services Routers 3D

Data Sheet
Cisco 2800 Series Integrated Services Routers
Cisco Systems ®, Inc. is redefining best-in-class enterprise and small- to- midsize business routing with a new line
of integrated services routers that are optimized for the secure, wire-speed delivery of concurrent data, voice, video,
and wireless services. Founded on 20 years of leadership and innovation, the Cisco® 2800 Series of integrated services
routers (refer to Figure 1) intelligently embed data, security, voice, and wireless services into a single, resilient system
for fast, scalable delivery of mission-critical business applications. The unique integrated systems architecture of the
Cisco 2800 Series delivers maximum business agility and investment protection.
Figure 1. Cisco 2800 Series
PRODUCT OVERVIEW
The Cisco 2800 Series comprises four platforms (refer to Figure 1): the Cisco 2801, the Cisco 2811, the Cisco 2821, and the Cisco 2851. The Cisco
2800 Series provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold
performance improvement, up to a tenfold increase in security and voice performance, embedded service options, and dramatically increased slot
performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700,
Cisco 2600, and Cisco 3700 Series.
The Cisco 2800 Series features the ability to deliver multiple high-quality simultaneous services at wire speed up to multiple T1/E1/xDSL
connections. The routers offer embedded encryption acceleration and on the motherboard voice digital-signal-processor (DSP) slots; intrusion
prevention system (IPS) and firewall functions; optional integrated call processing and voice mail support; high-density interfaces for a wide
range of wired and wireless connectivity requirements; and sufficient performance and slot density for future network expansion requirements
and advanced applications.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 20
SECURE NETWORK CONNECTIVITY FOR DATA, VOICE, AND VIDEO
Security has become a fundamental building block of any network. Routers play an important role in any network defense strategy because
security needs to be embedded throughout the network. The Cisco 2800 Series features advanced, integrated, end-to-end security for the delivery
of converged services and applications. With the Cisco IOS® Software Advanced Security feature set, the Cisco 2800 provides a robust array of
common security features such as a Cisco IOS Software Firewall, intrusion prevention, IPSec VPN, advanced application inspection and control,
Secure Shell (SSH) Protocol Version 2.0, and Simple Network Management Protocol (SNMPv3) in one secure solution set. Additionally, by
integrating security functions directly into the router itself, Cisco can provide unique intelligent security solutions other security devices cannot,
such as network admissions control (NAC) for antivirus defense; Voice and Video Enabled VPN (V3PN) for quality-of-service (QoS) enforcement
when combining voice, video, and VPN; and Dynamic Multipoint VPN (DMVPN) and Easy VPN for enabling more scalable and manageable
VPN networks. In addition, Cisco offers a range of security acceleration hardware such as the intrusion-prevention network modules and advanced
integration modules (AIM) for encryption, making the Cisco 2800 Series the industry’s most robust and adaptable security solution available for
branch offices. As Figure 2 demonstrates, using a Cisco 2800 Series uniquely enables customers to deliver concurrent, mission-critical data, voice,
and video applications with integrated, end-to-end security at wire-speed performance.
CONVERGED IP COMMUNICATIONS
As shown in Figure 2, the Cisco 2800 Series can meet the IP Communications needs of small-to-medium sized business and enterprise branch
offices while concurrently delivering an industry-leading level of security within a single routing platform. Cisco CallManager Express (CME)
is an optional solution embedded in Cisco IOS Software that provides call processing for Cisco IP phones, including wired and cordless WLAN
phones. This solution is for customers with data-connectivity requirements interested in deploying a converged IP telephony solution for up to 72
IP phones and-as of Cisco IOS 12.3(11)T release-for up to 96 IP phones. With the Cisco 2800 Series, customers can securely deploy data, voice, and
IP telephony on a single platform for their small-to-medium sized branch offices, helping them to streamline their operations and lower their network
costs. The Cisco 2800 Series with optional Cisco CME support offers a core set of phone features that customers require for their everyday business
needs and takes advantage of the wide array of voice capabilities that are embedded in the Cisco 2800 Series (as shown in Table 1) together with
optional features available in Cisco IOS Software to provide a robust IP telephony offering for the small to medium-sized branch-office environment.
WIRELESS SERVICES
The Cisco 2800 Series can provide a complete wireless solution for branch offices, small/medium sized businesses, and Wi-Fi hotspots. Wireless
services enable greater mobility for employees, partners, and customers, resulting in increased productivity. The Cisco 2800 Series supports an
integrated access point for wireless LAN connectivity, Wi-Fi Hotspot services for public access, wireless infrastructure services for cordless
WLAN telephony and for larger sites, and land mobile radio over IP for radio users.
INTEGRATED SERVICES
Figure 2 also highlights the fact that with the unique integrated services architecture of the Cisco 2800 Series, customers can now securely deploy
IP Communications with traditional IP routing while leaving interface and module slots available for additional advanced services. With the optional
integration of a wide array of services modules, the Cisco 2800 Series offers the ability to easily integrate the functions of standalone network
appliances and components into the Cisco 2800 Series chassis itself. Many of these modules, such as the Cisco Network Analysis Module, Cisco
Voice Mail Module, Cisco Intrusion Detection Module, and Cisco Content Engine Module, have embedded processors and hard drives that allow
them to run largely independently of the router while allowing management from a single management interface. This flexibility greatly expands
the potential applications of the Cisco 2800 Series beyond traditional routing while still maintaining the benefits of integration. These benefits
include ease of management, lower solution costs (CAPEX and OPEX), and increased speed of deployment.
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 2 of 20
APPLICATIONS
Secure Network Connectivity with Converged IP Communications
Figure 2. Secure Network Connectivity with Converged IP Communications
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 3 of 20
Architecture—Features and Benefits
The Cisco 2800 Series architecture has been designed specifically to meet the expanding requirements of enterprise branch offices and small-tomedium-sized businesses for today’s and future applications. The Cisco 2800 Series provides the broadest range of connectivity options in the
industry combined with leading-edge availability and reliability features. In addition, Cisco IOS Software provides support for a complete suite
of transport protocols, Quality-of-Service (QoS) tools, and advanced security and voice applications for wired and wireless deployments.
Table 1.
Architecture—Features and Benefits
Feature
Benefit
Modular Architecture
• A wide variety of LAN and WAN options are available. Network interfaces can be upgraded in the field
to accommodate future technologies.
• Several types of slots are available to add connectivity and services in the future on an “integrate-asyou-grow” basis.
• The Cisco 2800 supports more than 90 modules, including most of the existing WICs, VICs, network
modules, and AIMs (Note: the Cisco 2801 router does not support network modules).
Embedded Security Hardware
Acceleration
• Each of the Cisco 2800 Series routers comes standard with embedded hardware cryptography
Increased Default Memory
• The Cisco 2811, 2821, and 2851 Routers offer 64 MB of Flash and 256 MB of DRAM memory.
accelerators, which when combined with an optional Cisco IOS Software upgrade help enable WAN
link security and VPN services.
• The Cisco 2801 router comes with 64 MB Flash and 128 MB DRAM memory.
Integrated Dual Fast Ethernet
or Gigabit Ethernet Ports
• The Cisco 2800 Series provide two 10/100 on the Cisco 2801 and Cisco 2811 and two 10/100/1000
Support for Cisco IOS Software
Release 12.3T Feature Sets
• The Cisco 2800 helps enable end-to-end solutions with full support for the latest Cisco IOS Software-
on the Cisco 2821 and Cisco 2851
based QoS, bandwidth management, and security features.
• Common feature and command set structure across the Cisco 1700, 1800, 2600, 2800, 3700 and 3800
series routers simplifies feature set selection, deployment, management, and training.
Optional Integrated Power Supply
for Distribution of Power Over
Ethernet (PoE)
• An optional upgrade to the internal power supply provides in-line power (802.3af-compliant Power-
Optional Integrated Universal
DC Power Supply
• On the Cisco 2811, 2821, and 2851 routers an optional DC power supply is available that extends
Integrated Redundant-Power-Supply
(RPS) Connector
• On the Cisco 2811, 2821, and 2851 there is a built in external power-supply connector that eases the
over-Ethernet [PoE] and Cisco standard inline power) to optional integrated switch modules.
possible deployments environments such as central offices and industrial environments (Note: not
available on the Cisco 2801).
addition of external redundant power supply that can be shared with other Cisco products to decrease
network downtime by protecting the network components from downtime due to power failures.
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 4 of 20
Modularity—Features and Benefits
The Cisco 2800 Series provides significantly enhanced modular capabilities (refer to Table 2) while maintaining investment protection for customers.
The modular architecture has been redesigned to support increasing bandwidth requirements, time-division multiplexing (TDM) interconnections,
and fully integrated power distribution to modules supporting 802.3af PoE or Cisco in-line power, while still supporting most existing modules. With
more than 90 modules shared with other Cisco routers such as the Cisco 1700, 1800, 2600, 3700, and 3800 series, interfaces for the Cisco 2800
Series can easily be interchanged with other Cisco routers to provide maximum investment protection in the case of network upgrades. In addition,
taking advantage of common interface cards across a network greatly reduces the complexity of managing inventory requirements, implementing
large network rollouts, and maintaining configurations across a variety of branch-office sizes.
Table 2.
Modularity—Features and Benefits
Feature
Benefit
Enhanced Network-Module
(NME) Slots
• The NME slots support existing network modules (Note: NM and NME support on Cisco 2811, 2821,
and 2851 only)
• NME Slots offer high data throughput capability (up to 1.6Gbps) and support for Power over
Ethernet (POE).
• NME slots are highly flexible with future support for extended NMEs (NME-X on Cisco 2821 and 2851
only) and enhanced double-wide NMEs (NME-XDs) (Note: Cisco 2851 only).
High-Performance WIC (HWIC) Slots
with Enhanced Functionality
• Four integrated HWIC slots on Cisco 2811, 2821, and 2851 and two integrated HWIC slots on Cisco
2801 allow for more flexible and dense configurations.
• HWICs slots can also support WICs, VICs, and VWICs
• HWIC slots offer high data throughput capability (up to 400 Mbps half duplex or 800 Mbps aggregate
throughput) and Power over Ethernet (POE) support.
• A flexible form factor supports up to two double-wide HWIC (HWIC-D) modules.
Dual AIM Slots
• Dual AIM slots support concurrent services such as hardware-accelerated security, ATM segmentation
and reassembly (SAR), compression, and voice mail (Refer to Table 7 for more details on specific
platform support).
Packet Voice DSP Module (PVDM)
Slots on Motherboard
• Slots for Cisco PVDM2 Modules (DSP Modules) are integrated on the motherboard, freeing slots on the
Extension-Voice-Module (EVM) Slot
• The EVM supports additional voice services and density without consuming the network-module slot
router for other services.
(Note: available only on Cisco 2821 and 2851).
USB Support
• Up to two USB ports are available per Cisco 2800 series router. The routers’ Universal Serial Bus
(USB) ports enable important security and storage capabilities.
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 5 of 20
Secure Networking—Feature and Benefits
The Cisco 2800 Series features enhanced security functionality as shown in Table 3. Integrated on the motherboard of every Cisco 2800 Series
router is hardware-based encryption acceleration that offloads the encryption processes to provide greater IPSec throughput with less overhead for
the router CPU when compared with software-based solutions. With the integration of optional VPN modules (for enhanced VPN tunnel count),
Cisco IOS Software-based firewall, network access control, or content-engine network modules, Cisco offers the industry’s most robust and
adaptable security solution for branch-office routers.
Table 3.
Secure Networking—Feature and Benefits
Feature
Benefit
Cisco IOS Software Firewall
• Sophisticated security and policy enforcement provides features such as stateful, application-based
filtering (context-based access control), per-user authentication and authorization, real-time alerts,
transparent firewall, and IPv6 firewall.
Onboard VPN Encryption
Acceleration
• The Cisco 2800 Series supports IPSec Digital Encryption Standard (DES), Triple DES (3DES),
Network Admissions Control (NAC)
• A Cisco Self-Defending Network initiative, NAC seeks to dramatically improve the ability of networks
Advanced Encryption Standard (AES) 128, AES 192, and AES 256 cryptology without consuming
an AIM slot.
to identify, prevent, and adapt to threats by allowing network access only to compliant and trusted
endpoint devices.
Multiprotocol Label Switching
(MPLS) VPN Support
• The Cisco 2800 Series supports specific provider edge functions plus a mechanism to extend
USB eToken Support
• USB eTokens from Aladdin Knowledge Systems (available at http://www.aladdin.com/etoken/cisco/)
customers’ MPLS VPN networks out to the customer edge with virtual routing and forwarding (VRF)
firewall and VRF IPSec. For details on the MPLS VPN support on the different versions of the Cisco
2800 Series, please check the feature navigator tool on http://www.cisco.com.
provides secure configuration distribution and allows users to store VPN credentials for deployment
AIM-Based Security Acceleration
• Support for an optional dedicated security AIM can deliver 2 to 3 times the performance of embedded
encryption capabilities with Layer 3 compression.
Intrusion Prevention System (IPS)
• Flexible and high performance support is offered through Cisco IOS® Software or an intrusiondetection-system (IDS) network module.
• The ability to load and enable selected IDS signatures in the same manner as Cisco IDS Sensor
Appliances
Advanced Application Inspection
and Control
• Cisco IOS Firewall includes HTTP and several email inspection engines that can be used to detect
Cisco Easy VPN Remote and
Server Support
• The Cisco 2800 Series eases administration and management of point-to-point VPNs by actively
Dynamic Multipoint VPN (DMVPN)
• DMVPN is a Cisco IOS Software solution for building IPSec + generic routing encapsulation (GRE)
misuse of port 80 and email connectivity.
pushing new security policies from a single headend to remote sites.
VPNs in an easy and scalable manner.
URL Filtering
• URL filtering is available onboard with an optional content-engine network module or external with a
PC server running the URL filtering software.
Cisco Router and Security Device
Manager (SDM)
• This intuitive, easy-to-use, Web-based device-management tool is embedded within the Cisco IOS
Software access routers; it can be accessed remotely for faster and easier deployment of Cisco routers
for both WAN access and security features.
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 6 of 20
IP Telephony Support—Features and Benefits
The Cisco 2800 Series allows network managers to provide scalable analog and digital telephony without investing in a one-time solution (refer to
Table 4 for more detail), allowing enterprises greater control of their converged telephony needs. Using the voice and fax modules, the Cisco 2800
Series can be deployed for applications ranging from voice-over-IP (VoIP) and voice-over-Frame Relay (VoFR) transport to robust, centralized
solutions using the Cisco Survivable Remote Site Telephony (SRST) solution or distributed call processing using Cisco Call Manager Express
(CME). The architecture is highly scalable with the ability to connect up to 12 T1/E1s trunks, 52 foreign-exchange-station (FXS) ports, or 36 foreignexchange-office (FXO) ports.
Table 4.
IP Telephony Support—Features and Benefits
Feature
Benefit
IP Phone Support
• Optional support for Cisco in-line power distribution to Ethernet switch network modules and HWICs
EVM Module Slots
• Extension Voice Module Slots, available only on the Cisco 2821 and Cisco 2851, provide support for
can be used to power Cisco IP phones.
the Cisco High-Density Analog and Digital Extension Module for Voice and Fax, providing support for
up to 24 total voice and fax sessions without consuming a Network Module Slot.
PVDM (DSP) Slots on Motherboard
• DSP (PVDM2) modules deliver support for analog and digital voice, conferencing, transcoding, and
secure Real-Time Transport Protocol (RTP) applications.
Integrated Call Processing
• Cisco CME is an optional solution embedded in Cisco IOS Software that provides call processing for
Cisco IP phones. Cisco CME delivers telephony features similar to those that are commonly used by
business users to meet the requirements of the small to medium-sized offices.
Integrated Voice Mail
• Support for up to a 100 mailboxes using the Cisco Unity® Express voice messaging system is possible
with the integration of an optional voice-mail AIM or network module.
Broad Range of Voice Interfaces
• Interfaces for public switched telephone network (PSTN), private branch exchange (PBX), and key
system connections include FXS; FXO; analog direct inward dialing (DID); ear and mouth (E&M);
Centralized Automated Message Accounting (CAMA); ISDN Basic Rate Interface (BRI); and T1, E1,
and J1 with ISDN Primary Rate Interface (PRI); QSIG; E1 R2; and several additional channelassociated-signaling (CAS) signaling schemes.
Survivable Remote Site Telephony
(SRST)
• Branch offices can take advantage of centralized call control while cost-effectively providing local
branch backup using SRST redundancy for IP telephony.
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 7 of 20
Wireless Support—Features and Benefits
The Cisco 2800 Series can provide a complete wireless solution for branch offices, small/medium sized businesses, and Wi-Fi hotspots.
Wireless services enable greater mobility for employees, partners, and customers, resulting in increased productivity.
Table 5.
Wireless Support-Features and Benefits
Feature
Benefit
WLAN Connectivity
• The 802.11b/g or 802.11a/b/g HWIC access point interface card can be used to provide integrated
WLAN connectivity to mobile clients at sites requiring a single access point, resulting in mobility and
enhanced productivity for users.
• Dual RP-TNC connectors enable diversity and allow for optimum coverage through the use of external
antennas.
Wireless Infrastructure Services
• Telephony support for wired and WLAN IP phones is delivered by Cisco CallManager Express (CCME)
or by Survivable Remote Site Telephony (SRST) with Cisco CallManager. Cordless WLAN IP phones
allow users to be mobile and more productive.
• Integrated switch modules with Power over Ethernet (POE) enable support for Cisco Aironet access
points (for larger sites) as well as wired IP phones.
• Mobility for clients from WLAN to cellular networks is enabled by Mobile IP home agent support.
• IEEE 802.1x local authentication using LEAP provides enhanced reliability through survivable
authentication for WLAN clients during WAN failures.
• Customizable guest access is enabled with the service selection gateway features, along with
the Subscriber Edge Services Manager.
Land Mobile Radio Over IP
• LMR over IP support allows radio users (e.g., security personnel, maintenance personnel, police
officers, etc.) to communicate via IP with phone and PC users, delivering improved communications
and productivity.
Wi-Fi Hotspot Services
• The access zone router and service selection gateway services features can be used to deploy secure
public WLAN access services with an integrated HWIC-AP for small sites or with Cisco Aironet access
points for larger sites. Wi-Fi hotspot services can be offered for additional revenue for public locations
(e.g., restaurants, hotels, airports, etc.) or a value-added service for customer satisfaction.
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 8 of 20
Cost of Ownership and Ease of Use—Features and Benefits
The Cisco 2800 Series continues the heritage of offering versatility, integration, and power to branch offices. The Cisco 2800 Series offers many
enhancements to help enable the support of multiple services in the branch office as shown in the table below.
Table 6.
Cost of Ownership and Ease of Use—Feature and Benefits
Feature
Benefit
Integrated Channel Service
Unit/Data Service Unit (CSU/DSU),
Add/Drop Multiplexers, Firewall,
Modem, Compression, and
Encryption
• Consolidates typical communications equipment found in branch-office wiring closets into a single,
Optional Network Analysis Module
• Provides application-level visibility into network traffic for troubleshooting, performance monitoring,
compact unit; this space-saving solution provides better manageability
capacity planning, and managing network-based services (Note: Cisco 2811, 2821, and 2851 only)
Cisco IOS Software Warm Reboot
• Reduces system boot time, and decreases downtime caused by Cisco IOS Software reboots
(Cisco 2811, 2821 and 2851)
Enhanced Setup Feature
• Optional setup wizard with context-sensitive questions guides the user through the router
configuration process, allowing faster deployment
CiscoWorks Support
• Offers advanced management and configuration capabilities through a Web-based GUI
Cisco AutoInstall
• Configures remote routers automatically across a WAN connection to save cost of sending
technical staff to the remote site
SUMMARY AND CONCLUSION
As companies strive to lower the cost of running their network and increase the productivity of their end users with network applications, more
intelligent branch-office solutions are required. The Cisco 2800 Series offers these solutions by providing enhanced performance and increased
modular density to support multiple services at wire speed. The Cisco 2800 Series is designed to consolidate the functions of many separate devices
into a single, compact package that can be managed remotely. Because the Cisco 2800 Series routers are modular devices, interface configurations
are easily customized to accommodate a wide variety of network applications, such as branch-office data access, integrated switching, voice and
data integration, wireless LAN services, dial access services, VPN access and firewall protection, business-class DSL, content networking, intrusion
prevention, inter-VLAN routing, and serial device concentration. The Cisco 2800 Series provides customers with the industry’s most flexible,
adaptable infrastructure to meet both today’s and tomorrow’s business requirements for maximum investment protection.
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 9 of 20
PRODUCT SPECIFICATIONS
Table 7.
Chassis Specifications
Cisco 2800 Series
Cisco 2801
Cisco 2811
Cisco 2821
• Default: 128 MB
• Default: 256 MB
• Default: 256 MB
• Maximum: 384 MB
• Maximum: 768 MB
• Maximum: 1 GB
• Default: 64 MB
• Default: 64 MB
• Maximum: 128MB
• Maximum: 256 MB
Fixed USB 1.1 Ports
1
2
Onboard LAN Ports
2-10/100
Onboard AIM
(Internal) Slot
2
Interface Card Slots
• 4 slots; 2 slots support
Cisco 2851
Product Architecture
DRAM
Compact Flash
2-10/100/1000
4 slots, each slot can support HWIC, WIC, VIC, or VWIC type modules
HWIC, WIC, VIC, or
VWIC type modules
• 1 slot supports WIC,
VIC, or VWIC type
modules
• 1 slot supports VIC or
VWIC type modules
Network-Module Slot
No
Extension Voice
Module Slot
0
1
PVDM (DSP) Slots
on Motherboard
2
3
Integrated HardwareBased Encryption
Yes
VPN Hardware
Acceleration
(on Motherboard)
DES, 3DES, AES 128, AES 192, and AES 256
Optional Integrated
In-Line Power (PoE)
Yes, requires AC-IP power supply
Console Port
(up to 115.2 kbps)
1
Auxiliary Port
(up to 115.2 kbps)
1
Minimum Cisco IOS
Software Release
12.3(8)T
Rack Mounting
Yes, 19-inch
Yes, 19- and 23-in. options
Wall Mounting
No
Yes
1 slot, supports NM and
NME type modules
1 slot, supports NM, NME
and NME-X type modules
No
1 slot, supports NM, NME,
NME-X, NMD and NMEXD type modules
No
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 10 of 20
Cisco 2800 Series
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
Power Requirements
AC Input Voltage
100 to 240 VAC, autoranging
AC Input Frequency
47-63 Hz
AC Input Current
2A (110V) 1A (230V)
AC Input Surge Current
50A maximum, one cycle (-48V power included)
AC-IP Maximum In-Line
Power Distribution
120W
AC-IP Input Current
4A (110V) 2A (230V)
AC-IP Input Surge
Current
50A maximum, one cycle (-48V power included)
DC Input Voltage
No DC Power Option
available
24 to 60 VDC, autoranging positive or negative
DC Input Current
No DC Power Option
available
• 8A (24V)
• 12A (24V)
• 3A (60V)
• 5A (60V)
• Startup current 50A<10
• Startup current 50A<10 ms
3A (110V) 2A (230V)
160W
240W
360W
8A (110V) 4A (230V)
ms
Power Dissipation-AC
without IP Phone
Support
150W (511 BTU/hr)
170W (580 BTU/hr)
280W (955 BTU/hr)
280W (955 BTU/hr)
Power Dissipation-AC
with IP Phone SupportSystem Only
150W (511 BTU/hr)
210W (717 BTU/hr)
310W (1058 BTU/hr)
370W (1262 BTU/hr)
Power Dissipation-AC
with IP Phone Support-IP
Phones
180W (612 BTU/hr)
160W (546 BTU/hr)
240W (819 BTU/hr)
360W (1128 BTU/hr)
Power Dissipation-DC
Not applicable
180W (614 BTU/hr)
300W (1024 BTU/hr)
300W (1024 BTU/hr)
RPS
No
External only, connector for RPS provided by default
Recommended RPS Unit
No RPS option
Cisco RPS-675 Redundant Power System
Environmental Specifications
Operating Temperature
32 to 104°F (0 to 40°C)
Operating Humidity
10 to 85% non-condensing
5 to 95%, non-condensing
Non-Operating
Temperature
–
-40° to 158°F (-40° to 70°C)
Operation Altitude
• 25°C @ 3 km/10 kft
• 27.5°C @ 15 kft
• 40°C @ sea level
• 35°C @ 3km/10 kft
• 40°C @ sea level
Dimensions (H x W x D)
• 1.72 x 17.5 x 16.5 in.
• 1.75 x 17.25 x 16.4 in.
• 3.5 x 17.25 x 16.4 in.
• (43.7 x 445 x 419 mm)
• (44.5 x 438.2 x 416.6
• (88.9 x 438.2 x 416.6 mm)
mm)
Rack Height
1 rack unit (1RU)
Weight
(Fully Configured)
13.7 lb (6.2 kg)
2RU
14 lb (6.4 kg)
25 lb (11.4 kg)
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 11 of 20
Cisco 2800 Series
Cisco 2801
Cisco 2811
Cisco 2821
Noise Level (Min/Max)
• 39 dBA for normal
• 47 dBA for normal
• 44 dBA for normal operating temperature
operating temperature
(<90°F/32.2°C)
• 53.5 dBA (@ maximum
fan speed)
operating temperature
(<90°F/32.2°C)
Cisco 2851
(<90°F/32.2°C)
• 53 dBA (@ maximum fan speed)
• 57 dBA (@ maximum
fan speed)
Regulatory Compliance
NEBS—Level 3
No
Safety
• UL 60950
Yes
Yes
• CAN/CSA C22.2 No. 60950
• IEC 60950
• EN 60950-1
• AS/NZS 60950
Immunity
• EN300386
• EN55024/CISPR24
• EN50082-1
• EN61000-6-2
EMC
• FCC Part 15
• ICES-003 Class A
• EN55022 Class A
• CISPR22 Class A
• AS/NZS 3548 Class A
• VCCI Class A
• EN 300386
• EN61000-3-3
• EN61000-3-2
FIPS-2
FIPS 140-2 Certification for 2801, 2811, 2821, 2851
TELCOM**
For all four platforms, Telecom compliance standards depend upon country and interface type. Interfaces comply with
FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR’s. For specific
information see the datasheet for the specific interface card.
Homologation requirements vary by country and interface type. For specific country information, see the on-line
approvals data base:
http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearch&page=EXTERNAL_SEARCH&module
=EXTERNAL_SEARCH
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 12 of 20
MODULAR SUPPORT
Table 8.
Modules and Interface Cards Supported
Network Module
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
Ethernet Switching Network Modules
NME-16ES-1G
One 16-port 10/100 EtherSwitch service module, 1
10/100/1000 port, and IP Base
No
X
X
X
NME-16ES-1G-P
One 16-port 10/100 Cisco EtherSwitch service
module with802.3af, 1 10/100/1000 port, and IP Base
No
X
X
X
NME-X-23ES-1G
One 23-port 10/100 EtherSwitch service module, 1
10/100/1000 port, and IP Base
No
No
X
X
NME-X-23ES-1G-P
One 23-port 10/100 Cisco EtherSwitch service
module with802.3af, 1 10/100/1000 port with 802.3af,
and IP Base
No
No
X
X
NME-XD-24ES-2S-P
One 24-port 10/100 Cisco EtherSwitch service
module with802.3af, 1 SFP, Cisco StackWise
connectors, and IP Base
No
No
No
X
NME-XD-48ES-2S-P
One 48-port 10/100 Cisco EtherSwitch service
module with 802.3af, 2 SFPs, and IP Base
No
No
No
X
NM-16ESW
16-port 10/100 Cisco EtherSwitch® Network Module
No
X
X
X
NM-16ESW-1GIG
16-port 10/100 Cisco EtherSwitch Network Module
with 1 Gigabit Ethernet (1000BASE-T) port
No
X
X
X
NM-16ESW-PWR
16-port 10/100 Cisco EtherSwitch Network Module
with in-line power support
No
X
X
X
NM-16ESW-PWR-1GIG
16-port 10/100 Cisco EtherSwitch Network Module
with in-line power and Gigabit Ethernet
No
X
X
X
NMD-36ESW
36-port 10/100 Cisco EtherSwitch High-Density
Services Module (HDSM)
No
No
No
X
NMD-36ESW-2GIG
36-port 10/100 Cisco EtherSwitch HDSM with 1
Gigabit Ethernet (1000BASE-T) port
No
No
No
X
NMD-36ESW-PWR
36-port 10/100 Cisco EtherSwitch HDSM with in-line
power support
No
No
No
X
NMD-36ESW-PWR-2G
36-port 10/100 Cisco EtherSwitch HDSM with in-line
power and Gigabit Ethernet
No
No
No
X
Serial Connectivity Network Modules
NM-1T3/E3
1-port clear-channel T3/E3 network module
No
X
X
X
NM-1HSSI
1-port High-Speed Serial Interface (HSSI) network
module
No
X
X
X
NM-4A/S
4-port asynchronous/synchronous serial network
module
No
X
X
X
NM-8A/S
8-port asynchronous/synchronous serial network
module
No
X
X
X
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 13 of 20
Network Module
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
16-port asynchronous/synchronous serial network
nodule
No
X
X
X
NM-16A
16-port asynchronous serial network module
No
X
X
X
NM-32A
32-port asynchronous serial network module
No
X
X
X
NM-16A/S
Channelized T1/E1 and ISDN Network Modules
NM-1CE1T1-PRI
1-port Channelized E1/T1/ISDN PRI network module
No
X
X
X
NM-2CE1T1-PRI
2-port Channelized E1/T1/ISDN PRI network module
No
X
X
X
NM-4B-S/T
4-port ISDN BRI network module (S/T interface)
No
X
X
X
NM-4B-U
4-port ISDN BRI network module with integrated
Network Termination 1 (NT1) (U interface)
No
X
X
X
NM-8B-S/T
8-port ISDN BRI network module (S/T interface)
No
X
X
X
NM-8B-U
8-port ISDN BRI network module with integrated NT1
(U interface)
No
X
X
X
NM-1A-T3
1-port DS-3 ATM network module
No
X
X
X
NM-1A-E3
1-port E3 ATM network module
No
X
X
X
ATM Network Modules
Analog Dialup and Remote Access Network Modules
NM-8AM-V2
8-port analog modem network module with v.92
No
X
X
X
NM-16AM-V2
16-port analog modem network module with v.92
No
X
X
X
Voice Network Modules and Accessories
NM-HD-1V
1-slot IP Communications voice and fax network
module
No
X
X
X
NM-HD-2V
2-slot IP Communications voice and fax network
module
No
X
X
X
NM-HD-2VE
2-slot IP Communications enhanced voice and fax
network module
No
X
X
X
NM-HDA-4FXS
High-density analog voice and fax network module
with 4 FXS slots
No
X
X
X
NM-HDV2
IP Communications high-density voice and fax
network module
No
X
X
X
NM-HDV2-1T1/E1
1-port T1/E1 IP Communications high-density voice
and fax network module
No
X
X
X
NM-HDV2-2T1/E1
2-port T1/E1 IP Communications high-density voice
and fax network module
No
X
X
X
NM-HDV=
High Density Voice/Fax Network Module (Single VIC
Slot)
No
X
X
X
NM-HDV-1T1-12
1-port 12-channel T1 voice and fax network module
No
X
X
X
NM-HDV-1T1-24
1-port 24-channel T1 voice and fax network module
No
X
X
X
NM-HDV-1T1-24E
Single-port 24 enhanced channel T1 voice and fax
network module
No
X
X
X
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 14 of 20
Network Module
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
2-port 48-channel T1 voice and fax network module
No
X
X
X
1-port 12-channel E1 voice and fax network module
No
X
X
X
1-port 30-channel E1 voice and fax network module
No
X
X
X
1-port 30-enhanced-channel E1 voice and fax
Network Module
No
X
X
X
NM-HDV-2E1-60
2-port 60-channel E1 voice and fax network module
No
X
X
X
NM-HDV-1J1-30
1-port 30-channel J1 high-density voice network
module
No
X
X
X
NM-HDV-1J1-30E
1-port 30-enhanced-channel J1 high-density voice
network module
No
X
X
X
NM-HDV-FARM-C36
36-port transcoding and conferencing DSP farm
No
X
X
X
NM-HDV-FARM-C54
54-port transcoding and conferencing DSP farm
No
X
X
X
NM-HDV-FARM-C90
90-port transcoding and conferencing DSP farm
No
X
X
X
NM-HDV-2T1-48
NM-HDV-1E1-12
NM-HDV-1E1-30
NM-HDV-1E1-30E
Application Network Modules
NM-CE-BP-40G-K9
Cisco Content Engine Network Module, basic
performance, 40-GB IDE hard disk
No
X
X
X
NM-CE-BP-80G-K9
Cisco Content Engine Network Module, basic
performance, 80-GB IDE hard disk
No
X
X
X
NM-CE-BP-40G-S-K9
Cisco Content Engine Network Module for Security,
basic performance, 40-GB IDE hard disk
No
X
X
X
NM-CE-BP-80G-S-K9
Cisco Content Engine Network Module for Security,
basic performance, 80-GB IDE hard disk
No
X
X
X
NM-CIDS-K9
Cisco IDS Network Module
No
X
X
X
NM-CUE
Cisco Unity Express Voice-Mail Network Module
No
X
X
X
NM-CUE-EC
Cisco Unity Express Voice-Mail Network Module
extended capacity
No
X
X
X
NM-NAM
Cisco 2600, 3660, and 3700 series network analysis
module
No
X
X
X
No
X
X
X
Alarm Monitoring and Control Network Modules and Accessories
NM-AIC-64
Alarm monitoring and control network module
Circuit Emulation over IP (CEoIP) Network Modules
NM-CEM-4SER
4-port serial Circuit Emulation over IP (CEoIP)
network module
No
X
X
X
NM-CEM-4TE1
4-port T1/E1 Circuit Emulation over IP (CEoIP)
network module
No
X
X
X
Cisco IP VSAT Satellite WAN Network Module
No
X
X
X
High density voice/fax extension module -8 FXS/DID
No
No
X
X
Satellite Module
NM-1VSAT-GILAT
Extension Voice Modules
EVM-HD-8FXS/DID
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 15 of 20
Network Module
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
INTERFACE-CARD SUPPORT
Ethernet Switching HWICs
HWIC-4ESW
4-port single-wide 10/100BaseT Ethernet switch
HWIC
X
X
X
X
HWIC-D-9ESW
9-port double-wide 10/100BaseT Ethernet switch
HWIC
X
X
X
X
HWIC-4ESW-POE
4-port Ethernet switch HWIC, Power over Ethernet
capable
X
X
X
X
HWIC-D-9-ESW-POE
9-port Ethernet switch HWIC, Power over Ethernet
capable
X
X
X
X
No
X
X
X
802.11b/g HWIC access point interface card
(A-Americas; E-Europe; J-Japan)
X
X
X
X
802.11a/b/g HWIC access point interface card
(A-Americas; E-Europe; J-Japan)
X
X
X
X
WIC-1T
1-port high-speed serial WIC
X
X
X
X
WIC-2T
2-port high-speed serial WIC
X
X
X
X
HWIC-4T
4-port Serial HWIC
X
X
X
X
WIC-2A/S
2-port Asynch/Synch serial WIC
X
X
X
X
HWIC-4A/S
4-port Async/Sync serial HWIC
X
X
X
X
HWIC-8A/S-232
8-port Async/Sync serial HWIC, EIA-232
X
X
X
X
HWIC-8A
8-port Async HWIC
X
X
X
X
HWIC-16A
16-port Async HWIC
X
X
X
X
WIC-1DSU-T1-V2
1-port T1/Fractional-T1 DSU/CSU WIC
X
X
X
X
WIC-1DSU-56K4
1-port 4-wire 56-/64-kbps CSU/DSU WIC
X
X
X
X
WIC-1B-U-V2
1-port ISDN BRI with integrated NT1 (U interface)
X
X
X
X
WIC-1B-S/T-V3
1-port ISDN BRI with S/T interface
X
X
X
X
Gigabit Ethernet HWICs
HWIC-1GE-SFP
Wireless HWICs
HWIC-AP-G-A
HWIC-AP-G-E
HWIC-AP-G-J
HWIC-AP-AG-A
HWIC-AP-AG-E
HWIC-AP-AG-J
Serial HWIC/WICs
CSU/DSU WICs
ISDN BRI WICs
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 16 of 20
Network Module
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
DSL WAN Interface Cards
WIC-1ADSL
1-port asymmetric DSL (ADSL) over POTS
service WIC
X
X
X
X
WIC-1ADSL-DG
1-port ADSL over basic telephone service
with dying-gasp WIC
X
X
X
X
WIC-1ADSL-I-DG
1-port ADSL over ISDN with dying-gasp WIC
X
X
X
X
WIC-1SHDSL
1-port G.shdsl WIC (two wire only)
X
X
X
X
WIC-1SHDSL-V2
1-port G.shdsl WIC (two or four wire)
X
X
X
X
WIC-1SHDSL-V3
One port G.shdsl WIC with 4-wire support
X
X
X
X
HWIC-1ADSL
1-port ADSLoPOTS HWIC
X
X
X
X
HWIC-1ADSLI
1-port ADSLoISDN HWIC
X
X
X
X
WIC-1AM
1-port analog modem WIC
X
X
X
X
WIC-2AM
2-port analog modem WIC
X
X
X
X
Analog Modem WICs
T1, E1, and G.703 Multiflex Trunk Voice Cards and WICs
VWIC2-1MFT-T1/E1
1-Port T1/E1 Voice/WAN with Drop & Insert
X
X
X
X
VWIC2-2MFT-T1/E1
2-Port T1/E1 Voice/WAN with Drop & Insert
X
X
X
X
VWIC2-1MFT-G703
1-Port T1/E1 Voice/WAN with D&I & unstructured E1
(G703)
X
X
X
X
VWIC2-2MFT-G703
2-Port T1/E1 Voice/WAN with D&I & unstructured E1
(G703)
X
X
X
X
VWIC-2MFT-T1-DI
2-port RJ-48 multiflex trunk-T1 with drop and insert
X
X
X
X
VWIC-2MFT-T1
2-port RJ-48 multiflex trunk-T1
X
X
X
X
VWIC-1MFT-T1
1-port RJ-48 multiflex trunk-T1
X
X
X
X
VWIC-1MFT-E1
1-port RJ-48 multiflex trunk-E1
X
X
X
X
VWIC-1MFT-G703
1-port RJ-48 multiflex trunk-G.703
X
X
X
X
VWIC-2MFT-E1
2-port RJ-48 multiflex trunk-E1
X
X
X
X
VWIC-2MFT-E1-DI
2-port RJ-48 multiflex trunk-E1 with drop and insert
X
X
X
X
VWIC-2MFT-G703
2-port RJ-48 multiflex trunk-G.703
X
X
X
X
VIC2-2FXS
2-port VIC-FXS
X
X
X
X
VIC2-2FXO
2-port VIC-FXO (universal)
X
X
X
X
VIC2-4FXO
4-port VIC-FXO (universal)
X
X
X
X
VIC2-2E/M
2-port VIC-E&M
X
X
X
X
VIC2-2BRI-NT/TE
2-port VIC card-BRI (NT and TE)
X
X
X
X
VIC-2DID
2-port DID voice and fax interface card
X
X
X
X
VIC-1J1
1-port digital VIC (J1) for Japan
No
X
X
X
VIC-4FXS/DID
4-port FXS or DID VIC
X
X
X
X
VICs
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 17 of 20
Network Module
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
Advanced Integration Modules
AIM-ATM
High-performance ATM SAR AIM
No
X
X
X
AIM-COMPR2-V2
Data compression AIM
No
X
X
X
AIM-CUE
Cisco Unity Express Voice-Mail AIM
X
X
X
X
AIM-VPN/EPII-PLUS
Enhanced-performance DES, 3DES, AES, and
compression VPN encryption AIM
X
X
X
X
DSP (PVDM) Support on Motherboard Slots
PVDM2-8
8-channel fax and voice DSP module
X
X
X
X
PVDM2-16
16-channel fax and voice DSP module
X
X
X
X
PVDM2-32
32-channel fax and voice DSP module
X
X
X
X
PVDM2-48
48-channel fax and voice DSP module
X
X
X
X
PVDM2-64
64-channel fax and voice DSP module
X
X
X
X
MEMUSB-64FT
64 Mb USB Flash
X
X
X
X
MEMUSB-128FT
128 Mb USB Flash
X
X
X
X
MEMUSB-256FT
256 Mb USB Flash
X
X
X
X
USB Flash Storage
AVAILABILITY
The Cisco 2800 Series has been orderable since September, 2004, with first customer shipments at the end of September 2004.
ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page.
Table 9.
Ordering Information for Cisco 2800 Integrated Services Routers
Part Number
Product Name
CISCO2801
Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base
Software
CISCO2801-AC-IP
Integrated services router with AC power including power over ethernet distribution capability, 2FE, 4 Interface
Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2811
Integrated services router with AC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and Cisco IOS
IP Base Software
CISCO2811-AC-IP
Integrated services router with AC power including power over ethernet distribution capability, 2FE, 1 NME, 4 HWICs,
2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2811-DC
Integrated services router with DC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and Cisco IOS
IP Base Software
CISCO2821
Integrated services router with AC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS
IP Base Software
CISCO2821-AC-IP
Integrated services router with AC power including power over ethernet distribution capability, 2GE, 1 NME-X, 1 EVM,
4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 18 of 20
Part Number
Product Name
CISCO2821-DC
Integrated services router with DC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS
IP Base Software
CISCO2851
Dual Gigabit Ethernet integrated services router with AC power, 2GE, 1 NME-XD, 1 EVM, 4 HWICs, 3 PVDM slots,
2 AIMs, and Cisco IOS IP Base Software
CISCO2851-AC-IP
Integrated services router with AC power including power over ethernet distribution capability, 2GE, 1 NME-XD, 1 EVM,
4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2851-DC
Integrated services router with DC power, 2GE, 1 NME-XD, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS
IP Base Software
Also, check with your Cisco representative regarding security, xDSL, and voice bundles for the Cisco 2800 Series.
To download the software, visit the Cisco Software Center.
Table 10. Software Ordering Information
Part Number
Product Name
Supported Platform
S28IPB
Cisco 2800 IP Base
Cisco 2801
S28NIPBK9
Cisco 2800 IP Base K9
Cisco 2801
S28IPV
Cisco 2800 IP Voice
Cisco 2801
S28NIPVK9
Cisco 2800 IP Voice K9
Cisco 2801
S28ASK9
Cisco 2800 Advanced Security K9
Cisco 2801
S28EB
Cisco 2800 Enterprise Base
Cisco 2801
S280EBK9
Cisco 2800 Enterprise Base K9
Cisco 2801
S28SPSK9
Cisco 2800 SP Services K9
Cisco 2801
S280ES
Cisco 2800 Enterprise Services without Crypto
Cisco 2801
S28ESK9
Cisco 2800 Enterprise Services K9
Cisco 2801
S28AISK9
Cisco 2800 Advanced IP Services K9
Cisco 2801
S28AESK9
Cisco 2800 Advanced Enterprise Services K9
Cisco 2801
S28NIPB
Cisco 2800 IP Base
Cisco 2811, 2821, 2851
S28NIPV
Cisco 2800 IP Voice
Cisco 2811, 2821, 2851
S28NIVS
Cisco 2800 Int Voice/Video: GK, IPIP GW, TDMIP GW
Cisco 2811, 2821, 2851
S28NAVSK9
Cisco 2800 Int Voice/Video: GK, IPIP. GW, TDMIP GW AES
Cisco 2811, 2821, 2851
S28NASK9
Cisco 2800 Advanced Security K9
Cisco 2811, 2821, 2851
S28NEB
Cisco 2800 Enterprise Base
Cisco 2811, 2821, 2851
S28NEBK9
Cisco 2800 Enterprise Base K9
Cisco 2811, 2821, 2851
S28NSPSK9
Cisco 2800 SP Services K9
Cisco 2811, 2821, 2851
S28NES
Cisco 2800 Enterprise Services
Cisco 2811, 2821, 2851
S28NESK9
Cisco 2800 Enterprise Services K9
Cisco 2811, 2821, 2851
S28NAISK9
Cisco 2800 Advanced IP Services K9
Cisco 2811, 2821, 2851
© 2006 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 19 of 20
Part Number
Product Name
Supported Platform
S28NAESK9
Cisco 2800 Advanced Enterprise Services K9
Cisco 2811, 2821, 2851
S28NSNAK9
Cisco 2800 Advanced Enterprise Services with SNA switching software
Cisco 2811, 2821, 2851
SERVICE AND SUPPORT
Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique
combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your
network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power
of your business. For more information about Cisco Services, see Cisco Technical Support Services or Cisco Advanced Services.
FOR MORE INFORMATION
For more information about the Cisco 2800 Series, visit http://www.cisco.com/en/US/products/hwithrouters/ or contact your local account
representative.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
European Headquarters
Cisco Systems International BV
Haarlerbergpark
Haarlerbergweg 13-19
1101 CH Amsterdam
The Netherlands
www-europe.cisco.com
Tel: 31 0 20 357 1000
Fax: 31 0 20 357 1100
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-7660
Fax: 408 527-0883
Asia Pacific Headquarters
Cisco Systems, Inc.
168 Robinson Road
#28-01 Capital Tower
Singapore 068912
www.cisco.com
Tel: +65 6317 7777
Fax: +65 6317 7799
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on
the Cisco Website at www.cisco.com/go/offices.
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica • Croatia • Cyprus
Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong Kong SAR • Hungary • India • Indonesia • Ireland • Israel
Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands • New Zealand • Norway • Peru • Philippines • Poland • Portugal
Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore • Slovakia • Slovenia • South Africa • Spain • Sweden • Switzerland • Taiwan
Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe
Copyright  2006 Cisco Systems, Inc. All rights reserved. CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.;
Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE,
CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity,
Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net
Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect,
RateMUX, ScriptShare, SlideCast, SMARTnet, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates
in the United States and certain other countries.
All other trademarks mentioned in this document or Website are
property
of Systems,
their respective
The use
of the word partner does not imply a partnership relationship between
©the
2006
Cisco
Inc.owners.
All rights
reserved.
Cisco and any other company.
(0601R) notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Important
Printed in the USA
Page 20 of 20
C78-335076-00 04/06