HP 5120 SI Switch Series - Space

QuickSpecs
HP 5120 SI Switch Series
Overview
Models
HP 5120-48G SI Switch
HP 5120-24G SI Switch
HP 5120-16G SI Switch
HP 5120-24G-PoE+ (370W) SI Switch
HP 5120-24G-PoE+ (170W) SI Switch
JE072A
JE074A
JE073A
JG091A
JG092A
Key features
Full wire-speed, multi-layer switching
High reliability with redundancy
Comprehensive security control policies
Diversified Quality of Service (QoS) policies
Excellent manageability
Product overview
The HP 5120 SI Switch Series comprises intelligent, fully managed Gigabit Ethernet switches that provide high
performance, high port density, and simplified installation to improve the value of your network infrastructure investment.
The 5120 SI series is enhanced for the access layer in enterprise networks that require Gigabit Ethernet to the desktop
or at the distribution layer in metropolitan area networks (MANs). Wire-speed forwarding delivers more effective
throughput and the bandwidth necessary for mission-critical data and high-speed communications. As part of their
comprehensive security control, 5120 SI switches employ 802.1X authentication to identify users who attempt to access
the network. These switches are highly reliable, providing redundancy while eliminating loops in the network. They also
offer a range of management protocols to simplify network administration.
Features and benefits
Quality of Service (QoS)
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Powerful QoS feature: supports the following congestion actions: strict priority (SP) queuing, SDWRR, and
SP+SDWRR
Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4
information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port basis
Management
Friendly port names: allow assignment of descriptive names to ports
Remote configuration and management: is available through a secure Web browser or a command-line
interface (CLI)
Manager and operator privilege levels: enable read-only (operator) and read/write (manager) access on CLI and
Web browser management interfaces
Command authorization: leverages RADIUS to link a custom list of CLI commands to an individual network
administrator's login; also provides an audit trail
Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
Dual flash images: provide independent primary and secondary operating system files for backup while upgrading
Multiple configuration files: can be stored to the flash image
Complete session logging: provides detailed information for problem identification and resolution
SNMPv1, v2c, and v3: facilitate centralized discovery, monitoring, and secure management of networking devices
Remote monitoring (RMON): uses standard SNMP to monitor essential network functions; supports events,
alarm, history, and statistics group plus a private alarm extension group
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy
mapping by network management applications
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 1
QuickSpecs
HP 5120 SI Switch Series
Overview
Management VLAN: segments traffic to and from management interfaces, including CLI/telnet, a Web browser
interface, and SNMP
Device Link Detection Protocol (DLDP): monitors a cable between two switches and shuts down the ports on
both ends if the cable is broken, this prevents network problems such as loops
Connectivity
Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Flow control: using standard IEEE 802.3x, it provides back pressure to reduce congestion in heavy traffic
situations
Jumbo packet support: supports up to 10k byte frame size to improve performance of large data transfers
High-density port connectivity: provides up to 48 fixed 10/100/1000BASE-T ports in an entry-level static Layer 3
switch
Ethernet OAM: provides a Layer 2 link performance and fault detection monitoring tool, which reduces failover
and network convergence times
Power over Ethernet Plus (PoE+) support: provides 30 W power for connected devices, simplifies deployment,
and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local
power at each access point location
IPv6:
IPv6 Host: enables switches to be managed and deployed at the IPv6 network's edge
Dual stack (IPv4 and IPv6 using BIS): allows IPv4 hosts to communicate with IPv6 hosts
IPv6 ACL: for filtering IPv6 network traffic
Performance
Nonblocking architecture: up to 104 Gbps nonblocking switching fabric provides wire-speed switching with up to
77.4 million pps throughput
Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM-based) helps
ensure high levels of security and ease of administration without impacting network performance
Resiliency and high availability
Separate data and control paths: increases security and performance
Spanning Tree/MSTP, RSTP: provides redundant links while preventing network loops
IEEE 802.3ad Link Aggregation Control Protocol (LACP): supports up to 26 trunks, each with 8 links per trunk;
supports static or dynamic groups
Smart link: allows 50 ms failover between links
Intelligent Resilient Framework (IRF): creates virtual resilient switching fabrics, where two or more switches
perform as a single Layer 2 switch and Layer 3 router; switches do not have to be co-located and can be part of a
disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing
and high availability; simplifies network operation by eliminating the complexity of Spanning Tree Protocol, EqualCost Multipath (ECMP), or VRRP
Layer 2 switching
8K MAC address table: provides access to many Layer 2 devices
VLAN support and tagging: support IEEE 802.1Q with 4,094 simultaneous VLAN IDs
IP multicast snooping: automatically prevents flooding of IP multicast traffic
Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping:
effectively control and manage the flooding of multicast packets in a Layer 2 network
Layer 3 services
Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet;
supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses
Dynamic Host Configuration Protocol (DHCP): simplifies the management of large IP networks; supports client;
DHCP Relay enables DHCP operation across subnets
Loopback interface address: defines an address in Routing Information Protocol (RIP) and OSPF that can
always be reachable, improving diagnostic capability
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 2
QuickSpecs
HP 5120 SI Switch Series
Overview
Layer 3 routing
Static IP routing: provides manually configured routing for both IPv4 and IPv6 networks
Security
Access control lists (ACLs): provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port
ACL, and IPv6 ACL
Identity-driven security and access control:
Per-user ACLs: permits or denies user access to specific network resources based on user identity and time
of day, allowing multiple types of users on the same network to access specific network services without risk
to network security or unauthorized access to sensitive data
Automatic VLAN assignment: automatically assigns users to the appropriate VLAN based on their identities
Secure management access: securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL,
and/or SNMPv3
Secure FTP: allows secure file transfer to and from the switch; protects against unwanted file downloads or
unauthorized copying of a switch configuration file
Guest VLAN: similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients
Port isolation: secures and adds privacy, and prevents malicious attackers from obtaining user information
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs,
preventing forged BPDU attacks
STP Root Guard: protects the root bridge from malicious attacks or configuration mistakes
DHCP protection: blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of
network data
IP Source Guard: helps prevent IP spoofing attacks
Endpoint Admission Defense (EAD): provides security policies to users accessing a network
RADIUS/HWTACACS: eases switch management security administration by using a password authentication
server
Port security: allows access only to specified MAC addresses, which can be learned or specified by the
administrator
MAC-based authentication: allows or denies access to the switch based on a client MAC address
Convergence
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol that provides
easy mapping of network management applications
LLDP-MED: is a standard extension that automatically configures network devices, including LLDP-capable IP
phones
LLDP-CDP compatibility: receives and recognizes CDP packets from Cisco's IP phones for seamless
interoperation
Voice VLAN: automatically assigns VLAN and priority for IP phones, simplifying network configuration and
maintenance
IP multicast snooping (data-driven IGMP): automatically prevents flooding of IP multicast traffic
Multicast VLAN: reduces network bandwidth demand by eliminating multiple streams to each VLAN
Additional information
Green IT and power: use the latest advances in silicon development, shut off unused ports, and use variablespeed fans to improve energy efficiency
Green initiative support: provides support for RoHS and WEEE regulations
Warranty and support
Lifetime warranty: for as long as you own the product with advance replacement and next-business-day delivery
(available in most countries)†
Electronic and telephone support: limited electronic and telephone support is available from HP; to reach our
support centers, refer to: www.hp.com/networking/contact-support; for details on the duration of support provided
with your product purchase, refer to: www.hp.com/networking/warrantysummary
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 3
QuickSpecs
HP 5120 SI Switch Series
Overview
Software releases: to find software for your product, refer to: www.hp.com/networking/support; for details on the
software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary
† HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day
advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and
Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed
Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft
Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at:
www.hp.com/networking/warranty.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 4
QuickSpecs
HP 5120 SI Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
HP 5120-16G SI Switch
16 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports
min=0 \ max=4 SFP Transceivers
1U - Height
JE073A
See
Configuration
Note:1, 2
HP 5120-24G SI Switch
24 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports
min=0 \ max=4 SFP Transceivers
1U - Height
JE074A
See
Configuration
Note:1, 2
HP 5120-24G-HPoE SI Switch
24 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports
min=0 \ max=4 SFP Transceivers
1U - Height
JG091A
See
Configuration
Note:1, 2
HP 5120-24G-PoE SI Switch
24 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports
min=0 \ max=4 SFP Transceivers
1U - Height
JG092A
See
Configuration
Note:1, 2
HP 5120-48G SI Switch
48 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports
min=0 \ max=4 SFP Transceivers
1U - Height
JE072A
See
Configuration
Note:1, 2
Configuration Rules:
Note 1
Note 2
The following Transceivers install into this Module:
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD061A
JD062A
JD118B
JD119B
JD063B
JD098B
JD099B
JD089B
Localization required. (See Localization Menu for list.)
Transceivers
SFP Transceivers
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 5
QuickSpecs
HP 5120 SI Switch Series
Configuration
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH40 1310nm XCVR
HP X120 1G SFP LC LH40 1550nm XCVR
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP RJ45 T Transceiver
JD118B
JD119B
JD061A
JD062A
JD063B
JD098B
JD099B
JD089B
Cables
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
HP 1m Multi-mode OM3 LC/LC FC Cable
HP 2 m Multimode OM3 LC/LC FC Cable
HP 5 m Multimode OM3 LC/LC FC Cable
HP 15 m Multimode OM3 LC/LC FC Cable
HP 30 m Multimode OM3 LC/LC FC Cable
HP 50 m Multimode OM3 LC/LC FC Cable
HP Premier Flex LC/LC OM4 2f 1m Cbl
HP Premier Flex LC/LC OM4 2f 2m Cbl
HP Premier Flex LC/LC OM4 2f 5m Cbl
HP Premier Flex LC/LC OM4 2f 15m Cbl
HP Premier Flex LC/LC OM4 2f 30m Cbl
HP Premier Flex LC/LC OM4 2f 50m Cbl
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Switch Enclosure Options
External/Redundant Power Supplies
HP RPS1600 Redundant Power System
Height = 1U
includes 1 x c13, 1600w and Power Supply port
JG136A
See
Configuration
Note:2, 3
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
JG137A
See
Configuration
Note:1
Cofiguration Rules:
Note 1
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on
ordered or onsite.
Note 2
Localization required. (See Localization Menu for list.)
Note 3
Only 1 JG136A can be connected per switch.
Options for External/Redundant Power Supplies
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 6
QuickSpecs
HP 5120 SI Switch Series
Configuration
HP X290 1000 A JD5 2m RPS Cable
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
JD187A
Page 7
QuickSpecs
HP 5120 SI Switch Series
Technical Specifications
HP 5120-48G SI Switch (JE072A)
Ports
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 RJ-45 serial console port
Physical
Dimensions
10.24(d) x 17.3(w) x 1.72(h) in. (26.01 x 43.94 x 4.37 cm) (1U height)
characteristics
Weight
11.02 lb. (5 kg)
Memory and processor 128 MB flash, 128 MB SDRAM; packet buffer size: 1 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3 µs
Throughput
77.4 million pps
Routing/Switching
104 Gbps
capacity
Routing table size
32 entries
Environment
Operating temperature 32ºF to 113ºF (0ºC to 45ºC)
Electrical
characteristics
Safety
Emissions
Management
Services
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40ºF to 158ºF (-40ºC to 70ºC)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Maximum heat
189 BTU/hr (199.4 kJ/hr)
dissipation
Voltage
100-240 VAC
Maximum power rating55.4 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A;
ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN
61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN
61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive
2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR586E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 8
QuickSpecs
HP 5120 SI Switch Series
Technical Specifications
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 5120-24G SI Switch (JE074A)
Ports
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 RJ-45 serial console port
Physical
Dimensions
6.3(d) x 17.3(w) x 1.72(h) in. (16 x 43.94 x 4.37 cm) (1U height)
characteristics
Weight
6.61 lb. (3 kg)
Memory and processor 128 MB flash, 128 MB SDRAM; packet buffer size: 0.5 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3 µs
Throughput
41.7 million pps
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries
Environment
Operating temperature 32ºF to 113ºF (0ºC to 45ºC)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40ºF to 158ºF (-40ºC to 70ºC)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Electrical
Maximum heat
108 BTU/hr (113.94 kJ/hr)
characteristics
dissipation
Voltage
100-240 VAC
Maximum power rating31.5 W
Frequency
50/60 Hz
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 9
QuickSpecs
HP 5120 SI Switch Series
Technical Specifications
Notes
Safety
Emissions
Management
Services
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A;
ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN
61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN
61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive
2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR586E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 5120-16G SI Switch (JE073A)
Ports
16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 RJ-45 serial console port
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 10
QuickSpecs
HP 5120 SI Switch Series
Technical Specifications
Physical
characteristics
Dimensions
6.3(d) x 17.3(w) x 1.72(h) in. (16 x 43.94 x 4.37 cm) (1U height)
Weight
6.61 lb. (3 kg)
Memory and processor 128 MB flash, 128 MB SDRAM; packet buffer size: 0.5 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3 µs
Throughput
29.8 million pps
Routing/Switching
40 Gbps
capacity
Routing table size
32 entries
Environment
Operating temperature 32ºF to 113ºF (0ºC to 45ºC)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40ºF to 158ºF (-40ºC to 70ºC)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Electrical
Maximum heat
76 BTU/hr (80.18 kJ/hr)
characteristics
dissipation
Voltage
100-240 VAC
Maximum power rating22.4 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A;
ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN
61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN
61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive
2004/108/EC; FCC (CFR 47, Part 15) Class A
Management
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR584E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR585E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR586E)
Installation with minimum configuration, system-based pricing (UX116E)
Installation with HP-provided configuration, system-based pricing (UX117E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 11
QuickSpecs
HP 5120 SI Switch Series
Technical Specifications
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR588E)
1-year, 24x7 software phone support, software updates (HR587E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS682E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS683E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 5120-24G-PoE+ (370W) SI Switch (JG091A)
Ports
24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 RJ-45 serial console port
Physical
Dimensions
16.54(d) x 17.32(w) x 1.72(h) in. (42 x 44.0 x 4.36 cm) (1U height)
characteristics
Weight
15.43 lb. (7 kg)
Memory and processor 128 MB flash, 128 MB SDRAM; packet buffer size: 0.5 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3 µs
Throughput
41.7 million pps
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries
Environment
Operating temperature 32ºF to 113ºF (0ºC to 45ºC)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40ºF to 158ºF (-40ºC to 70ºC)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Electrical
Maximum heat
539 BTU/hr (568.65 kJ/hr)
characteristics
dissipation
Voltage
100-240 VAC
DC Voltage
-52 to -55 VDC
Maximum power rating832 W
PoE power
720 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 12
QuickSpecs
HP 5120 SI Switch Series
Technical Specifications
Safety
Emissions
Management
Services
dependent on the type and quantity of power supplies and may be
supplemented with the use of a External Power Supply (EPS).
With AC input, the Max power consumption is 523W (370W for PoE)
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A;
ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN
61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN
61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive
2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 5120-24G-PoE+ (170W) SI Switch (JG092A)
Ports
24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 RJ-45 serial console port
Physical
Dimensions
16.54(d) x 17.32(w) x 1.72(h) in. (42 x 44.0 x 4.36 cm) (1U height)
characteristics
Weight
15.43 lb. (7 kg)
Memory and processor 128 MB flash, 128 MB SDRAM; packet buffer size: 0.5 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 3 µs
Throughput
41.7 million pps
Routing/Switching
56 Gbps
capacity
Routing table size
32 entries
Environment
Operating temperature 32ºF to 113ºF (0ºC to 45ºC)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40ºF to 158ºF (-40ºC to 70ºC)
temperature
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 13
QuickSpecs
HP 5120 SI Switch Series
Technical Specifications
Electrical
characteristics
Safety
Emissions
Management
Services
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Maximum heat
290 BTU/hr (305.95 kJ/hr)
dissipation
Voltage
100-240 VAC
Maximum power rating255 W
PoE power
170 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is
dependent on the type and quantity of power supplies and may be
supplemented with the use of a External Power Supply (EPS).
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A;
ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN
61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN
61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive
2004/108/EC; FCC (CFR 47, Part 15) Class A
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
3-year, 4-hour onsite, 13x5 coverage for hardware (UV858E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV861E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV864E)
3-year, 24x7 SW phone support, software updates (UV867E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV859E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV862E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV865E)
4-year, 24x7 SW phone support, software updates (UV868E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV860E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV863E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV866E)
5-year, 24x7 SW phone support, software updates (UV869E)
3 Yr 6 hr Call-to-Repair Onsite (UW963E)
4 Yr 6 hr Call-to-Repair Onsite (UW964E)
5 Yr 6 hr Call-to-Repair Onsite (UW965E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
Standards and
protocols
(applies to all products in
series)
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X Gigabit Ethernet over
RFC 3513 IPv6 Addressing Architecture
RFC 3542 Advanced Sockets API for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extension for IPv6
RFC 3736 Stateless Dynamic Host
Configuration
Protocol (DHCP) Service for IPv6
RFC 4007 IPv6 Scoped Address Architecture
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 14
QuickSpecs
HP 5120 SI Switch Series
Technical Specifications
fiber
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1350 TFTP Protocol (revision 2)
RFC 2131 DHCP
RFC 2865 Remote Authentication Dial In User
Service (RADIUS)
RFC 2866 RADIUS Accounting
IPv6
RFC 1350 TFTP
RFC 1886 DNS Extension for IPv6
RFC 1887 IPv6 Unicast Address Allocation
Architecture
RFC 1981 IPv6 Path MTU Discovery
RFC 2292 Advanced Sockets API for IPv6
RFC 2373 IPv6 Addressing Architecture
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Autoconfiguration
RFC 2463 ICMPv6
RFC 2464 Transmission of IPv6 over Ethernet
Networks
RFC 2465 Management Information Base for IP
Version 6: Textual Conventions and General
Group(partially support, only "IPv6 Interface
Statistics table")
RFC 2475 IPv6 DiffServ Architecture
RFC 2553 Basic Socket Interface Extensions for
IPv6
RFC 2711 IPv6 Router Alert Option
RFC 2893 Transition Mechanisms for IPv6
Hosts
and Routers
RFC 2925 Definitions of Managed Objects for
Remote Ping, Traceroute, and Lookup
Operations
(Ping only)
RFC 2925 Remote Operations MIB (Ping only)
RFC 3056 Connection of IPv6 Domains via IPv4
Clouds
RFC 3162 RADIUS and IPv6
RFC 3363 DNS support
RFC 3484 Default Address Selection for IPv6
RFC 3493 Basic Socket Interface Extensions for
IPv6
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4291 IP Version 6 Addressing Architecture
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
RFC 5095 Deprecation of Type 0 Routing
Headers
in IPv6
RFC 5722 Handling of Overlapping IPv6
Fragments
MIBs
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Target MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP)
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 15
QuickSpecs
HP 5120 SI Switch Series
Accessories
HP 5120 SI Switch
Series accessories
Transceivers
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP RJ45 T Transceiver
Cables
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
HP 3600 Switch SFP Stacking Kit
Power Supply
HP RPS1600 Redundant Power System
HP RPS1600 1600W AC Power Supply
Power cords
HP X290 1000 A JD5 2m RPS Cable
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
JD118B
JD119B
JD061A
JD062A
JD063B
JD098B
JD099B
JD089B
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
JD324B
JG136A
JG137A
JD187A
Page 16
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X120 1G SFP LC SX Ports
Transceiver (JD118B) Connectivity
A small form-factor
pluggable (SFP) Gigabit
Ethernet LX transceiver
that provides a full
duplex Gigabit solution
up to 550m on MMF or
10Km on SMF.
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP X120 1G SFP LC LX Ports
Transceiver (JD119B) Connectivity
A small form-factor
pluggable (SFP) Gigabit
LX transceiver that
provides a full duplex
Gigabit solution up to
550m on MMF or 10Km
on SMF
Physical
characteristics
Electrical
characteristics
Cabling
Services
1 LC 1000BASE-SX port (IEEE 802.3z Type 1000BASE-SX)
Connector type
LC
Wavelength
850 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connector type
LC
Wavelength
1300 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 17
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
HP X125 1G SFP LC
LH40 1310nm
Transceiver (JD061A)
Ports
Connectivity
Physical
A small form-factor
characteristics
pluggable SFP Gigabit
LH40 transceiver that
Electrical
provides a full duplex
characteristics
Gigabit solution up to
40km on a single-mode
fiber.
Cabling
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1310 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
HP X120 1G SFP LC
LH40 1550nm
Transceiver (JD062A)
Ports
Connectivity
Physical
A small form-factor
characteristics
pluggable (SFP) Gigabit
LH40 transceiver that
Electrical
provides a full-duplex
Gigabit solution up to 40 characteristics
km on a single mode
fiber.
Cabling
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1550 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For
details about services and response times in your area, please
contact your local HP sales office.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 18
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
HP X125 1G SFP LC
LH70 Transceiver
(JD063B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP X120 1G SFP LC BX Ports
10-U Transceiver
(JD098B)
Connectivity
Physical
A small form-factor
pluggable (SFP) Gigabit characteristics
LX-BX10-U transceiver
that provides a full
duplex Gigabit solution
up to 10km on a single
mode cable.
Electrical
characteristics
Cabling
Notes
Services
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1550 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U);
Duplex: full only
Connector type
LC
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Maximum distance:
• 10km
Fiber type
Single Mode
TX 1310nm RX 1490nm
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 19
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
HP X120 1G SFP LC BX Ports
10-D Transceiver
(JD099B)
Connectivity
Physical
A small form-factor
pluggable (SFP) Gigabit characteristics
LX-BX10-D transceiver
that provides a full
duplex Gigabit solution
up to 10km on a single
mode cable.
Electrical
characteristics
Cabling
Notes
Services
HP X120 1G SFP RJ45 Ports
T Transceiver (JD089B) Connectivity
Physical
A small form factor
pluggable (SFP) Gigabit characteristics
1000Base-T transceiver
that provides a full
duplex Gigabit solution Electrical
up to 100m on a Cat-5+ characteristics
cable.
Cabling
Services
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D);
Duplex: full only
Connector type
LC
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Maximum distance:
• Up to 10km
Fiber type
Single Mode
TX 1490nm RX 1310nm
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connector type
RJ-45
Dimensions
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x
1.4 cm)
Full configuration
0.07 lb. (0.03 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù
differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair
(STP) balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 20
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Notes
Services
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 21
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
Services
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Notes
Services
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 22
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Notes
Services
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Notes
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a
tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic
cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 23
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
Services
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Notes
Services
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 24
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Notes
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 25
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Services
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 26
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
15m Cable (QK735A)
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 27
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Services
HP RPS1600
Redundant Power
System (JG136A)
Ports
Physical
characteristics
Environment
Electrical
characteristics
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)
Dimensions
15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x
4.42 cm)
Weight
14.11 lb. (6.4 kg)
Full configuration
16.75 lb. (7.6 kg)
weight
Operating temperature 14°F to 122°F (-10°C to 50°C)
Operating relative
5% to 95%
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%
relative humidity
Altitude
up to 13,123 ft. (4 km)
Acoustic
Pressure: 53 dB; ISO 7779, ISO 9296
Voltage
100-120/200-240 VAC
Current
30/60 A
Idle power
38 W
Maximum power rating3550 W
RPS power
3200 W
PoE power
2800 W
RPS
-55 V
PoE
-55 V
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 28
QuickSpecs
HP 5120 SI Switch Series
Accessory Product Details
Safety
Services
HP RPS1600 1600W AC Physical
Power Supply (JG137A) characteristics
Environment
Electrical
characteristics
Services
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
With one RPS1600 Power Supply, the
PRS1600 Redundant Power System can
provide 1600W power output; With two
PRS1600 Power Supplies, the output power is
3200W.
CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15,
Subpart B; EU RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class
A; ROHS Compliance; EN 300386
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
Dimensions
8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x
4.15 cm)
Weight
3.02 lb. (1.37 kg)
Operating temperature 14°F to 122°F (-10°C to 50°C)
Operating relative
5% to 95%
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%
relative humidity
Voltage
100-120/200-240 VAC
Current
15/30 A
Maximum power rating1600 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
To learn more, visit: www.hp.com/networking
© Copyright 2010-2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to
change without notice. The only warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13795 Worldwide QuickSpecs — Version 12 — 11.12.2013
Page 29