dedicated KVM switch and rackmount screen technology
User Manual
USB Hub DB-15
2-console KVM
IP-802H / IP-1602H
USB Hub DB-15
2-console KVM
CV-802H / CV-1602H
USB Hub DB-15 KVM
CV-801H / CV-1601H
751
Designed and manufactured by Austin Hughes
UM-CV-751-USBKVM-Q317V3
www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-751-USBKVM-Q317V3
www.austin-hughes.com
Contents
< Part 1 > USB Hub DB-15
IP-802H
1.1
1.2
1.3
1.4
1.5
1.6
1.7
2-console KVM
IP-1602H
Package contents
KVM port connection
IP & Local console connection
IP console setting
Important Preconfiguration for IP console
Built-in USB hub usage & connection
Specifications
P.1
P.2
P.3
P.4
P.5 - 7
P.8
P.9
< Part 2 > USB Hub DB-15 2-console KVM
CV-802H
CV-1602H
2.1
2.2
2.3
Package contents
KVM port connection
Remote & Local console connection
2.4
Built-in USB hub usage & connection
P.10
P.11
P.12 - 13
P.14
2.5
Specifications
P.15
< Part 3 > USB Hub DB-15 KVM
CV-801H
3.1
3.2
3.3
3.4
CV-1601H
Package contents
KVM port connection
Built-in USB hub usage & connection
Specifications
P.16
P.17
P.18
P.19
< Part 4 > Usage
4.1
4.2
4.3
4.4
4.5
KVM Button
Password
KVM OSD
KVM Hotkey & Remote Console Hotkey
DC Power Option : 12V / 24V / 48V / 125V / 250V
UM-CV-751-USBKVM-Q317V3
P.20
P.21
P.22
P.23
P.24
www.austin-hughes.com
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Installation for standalone KVM
A
Screw A: 2 pcs
Screw B: 8 pcs
M3.2 x 4.5 mm
M4 x 10 mm
■
Install each bracket using screws
provided shown in Figure 1.
■
Fix the KVM into the rack
B
Figure 1.
UM-CV-751-USBKVM-Q317V3
www.austin-hughes.com
< Part 1 > USB Hub DB-15
< 1.1 > Package Contents
KVM
USB Hub DB-15 IP KVM
IP-802H / IP-1602H
KVM unit
•
IP-802H or IP-1602H KVM unit x 1
•
Mounting set w/ bracket & screws x 1
•
Power adapter w/ power cord ( for KVM ) x 1
IP-802H
Local Console
Flash
12VDC
2 x USB 2.0
( USB hub for device connection )
IP-1602H
Daisy-chain feature for this model is NOT available.
UM-CV-751-USBKVM-Q317V3
P.1
www.austin-hughes.com
< 1.2 > KVM port connection
USB Hub DB-15 IP KVM
CB-6 / CB-10 / CB-15
■ 6 / 10 / 15 ft USB KVM cable
■ Support USB server
USB Servers
DB-15 USB KVM port
USB Servers
CB - 6 / 10 / 15 USB KVM cable
support USB server
UM-CV-751-USBKVM-Q317V3
P.2
www.austin-hughes.com
< 1.3 > IP & Local console connection
USB Hub DB-15 IP KVM
Network device
hub or router
CAT 5 / 6 cable
IP Console
Resolution Support
Frequency
( Hz )
1600 x 1200
60
1280 x 1024
60
1024 x 768
60 / 70 / 75
UM-CV-751-USBKVM-Q317V3
P.3
www.austin-hughes.com
< 1.4 > IP console setting
USB Hub DB-15 IP KVM
After the cable connection, please take the following steps to configure the IP KVM :
1. Download IPKVMsetup.exe from the link:
www.austin-hughes.com/support/utilities/cyberview/IPKVMsetup.exe
2. Double click IPKVMsetup.exe to configure the IP KVM by device setup as below.
3. Click Refresh Device to search the connected IP KVM
4. Select the M.A.C. address, which you want to setup, then click Query Device
5. Enter Super user login. The default is super
6. Enter Super user password. The default is pass
7. Enter the new super user password
8. Re-enter the new password
9. Change the desired IP address / Subnet mask / Gateway, then click Setup Device to confirm the setting to IP KVM
10. The default address is as below:-■ The single IP KVM model, such as IP-1602H - http://192.168.1.22
11. Open Internet Explorer ( I.E. ), version 6.0 or above
12. Enter the IP KVM address into the address bar
- For Single IP - http://192.168.1.22
13. Enter username ( default is super )
Password ( default is pass )
14. After successful login to IP KVM, the user will enter the main page of IP KVM
The setting is enough for intranet.
If the users access KVM GUI via internet, please ask MIS for assistance and
download IP KVM user manual from the link :
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-IP.pdf
UM-CV-751-USBKVM-Q317V3
P.4
www.austin-hughes.com
< 1.5 > Important Preconfiguration for IP console
USB Hub DB-15 IP KVM
You must complete the following tasks after the IP console setting is performed.
( 1 ) TARGET SERVER SETUP **Servers connected to KVM
Resolution
The IP KVM remote console recognizes several varieties of video display formats with resolutions up to 1600 x
1200 @60Hz. (Refer to the User Manual for a list of supported video formats). Minimize bandwidth by setting the
target server’s video resolution to the minimum setting required for your remote monitoring application.
The following video modes are recommended:
(i) 1024 x 768 @ 60Hz
(ii) 1280 x 1024 @ 60Hz
On a Windows target server system, select Control Panel > Display > Settings.
Modify the screen resolution value as necessary.
Mouse
Use generic mouse drivers for optimum mouse control during remote sessions. Set the mouse pointer speed to a
middle setting with no acceleration or snap-to effects.
On a Windows target server system, select Control Panel > Mouse > Pointer Options
Set the pointer speed to medium and disable Enhanced pointer precision
For Linux GUIs, set the mouse acceleration to exactly 1 and the threshold to exactly 1.
If your keyboard keeps repeating keys when it is plugged into the KVM. Please follow either one below :
( a. )
Enable key release timeout if you experience duplicated keystrokes during poor network performance.
- login to IP KVM remote console
- go to Interfaces KVM settings > Keyboard / Mouse
- click the Key Release Timeout
- adjust Timeout after if necessary
( b. )
Reduce video bandwidth usage if you experience duplicated keystrokes during poor network
- login to IP KVM remote console
- go to Interfaces KVM Settings > User Console > Transmission Encoding,
- select Manually
- adjust Compression to [ 0-none ] and Color depth to [ 8-bit – 256 col ]
UM-CV-751-USBKVM-Q317V3
P.5
www.austin-hughes.com
< 1.5 > Important Preconfiguration for IP console
USB Hub DB-15 IP KVM
( 2 ) REMOTE CLIENT COMPUTER SETUP
The remote client computer must have a web browser ( such as Microsoft Internet Explorer, Mozilla Firefox,
and Netscape Navigator ) and a Java Virtual Machine ( version 1.4 or higher ) installed. Enable Java on the
web browser.
JAVA Update for IP KVM
Due to the latest update from Java security, customer may face the "JAVA Block" message while accessing
the remote console over IP as below :
If it said so, please download the latest IP KVM firmware ( version aust-i11-150608 ) from the link below :
http://www.austin-hughes.com/resources/software/kvm-switch
Then follow the attached steps to update the firmware.
Firmware Update Steps
1) Download the latest IP KVM firmware ( version aust-i11-150608 ) from the link
http://www.austin-hughes.com/resources/software/kvm-switch
2) Login the IP KVM
3) Click < Update Firmware >
4) Click < Browse > to select the firmware file
5) Click < Upload >
UM-CV-751-USBKVM-Q317V3
P.6
www.austin-hughes.com
USB Hub DB-15 IP KVM
6) Click < Update >
After the firmware has been updated, IP KVM will reset automatically.
After one minute, you will be redirected to the Login page and requested to login again.
- Completed
UM-CV-751-USBKVM-Q317V3
P.7
www.austin-hughes.com
< 1.6 > Built-in USB Hub Usage & Connection
USB Hub DB-15 IP KVM
2 x USB 2.0 ( USB hub for device connection )
Flash Disk
Hard disk storage
Keyboard / Mouse
Scanner
Printer
Camera
UM-CV-751-USBKVM-Q317V3
P.8
www.austin-hughes.com
< 1.7 > Specifications
USB Hub DB-15 IP KVM
IP-802H
▀
▀
▀
▀
▀
▀
▀
▀
▀
IP-1602H
KVM Port
Number of ports :
8 or 16
Connector :
DB-15 combo connector
Connectivity :
Combo 2-in-1 VGA + USB KVM cable, 6, 10 or 15 feet
Local Console
Graphic connector :
1 x DB-15
Input device :
2 x USB type A for keyboard & mouse
USB hub :
2 x USB type A for sharing other peripheral devices among the computers
Resolution support :
4:3 - max. 1600 x 1200,
16:10 - max. 1920 x 1200
IP Remote Console
Connector :
RJ45 Ethernet
User management :
15-user login, 1 x active user
Network protocol :
DHCP / BOOTP / DNS
Security :
SSL v3, RSA, AES, HTTP / HTTPs, CSR
Browser :
IE, Firefox, Safari, Netscape
Resolution support :
4:3 - max. 1600 x 1200
Compatibility
Hardware :
HP / IBM / Dell PC, Server and Blade Server
SUN / Mac
OS Support :
Windows / Linux / Unix / Mac OS
Power
Input :
Auto sensing 100 to 240VAC, 50 / 60 Hz
Option DC :
12V / 24V / 48V / 125V / 250V DC input
Consumption :
Max. 18W
Regulatory
Safety :
FCC & CE certified
Environment :
RoHS2 & REACH compliant
Environmental
Operating
Storage / Non-operating
Temperature :
0 to 55°C degree
-20 to 60°C degree
Humidity :
20~90%, non-condensing
5~90%, non-condensing
Altitude :
16,000 ft
40,000 ft
Shock :
-
10G acceleration (11ms duration)
Vibration :
-
5~500Hz 1G RMS random
Product Information
Dimension (W x D x H) :
443 x 171 x 44 mm / 17.4 x 6.7 x 1.73 inch
Net weight :
3 kg / 6.5 lb
Packing Information
Dimension (W x D x H) :
500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch
Gross weight :
5 kg / 11 lb
UM-CV-751-USBKVM-Q317V3
P.9
www.austin-hughes.com
Part 2. USB Hub DB-15 2-console KVM
< 2.1 > Package Contents
USB Hub DB-15 2-console KVM
CV-802H / CV-1602H
KVM unit
•
CV-802H or CV-1602H KVM unit x 1
•
Mounting set w/ bracket & screws x 1
•
Power adapter w/ power cord ( for KVM ) x 1
•
Receiver box for remote console x 1
•
Power adapter w/ power cord ( for receiver ) x 1
•
CE-6 6ft Combo KVM cable for receiver box x 1
CV-802H
Local Console
Remote
12VDC
2 x USB 2.0
( USB hub for device connection )
CV-1602H
Daisy-chain feature for this model is NOT available.
UM-CV-751-USBKVM-Q317V3
P.10
www.austin-hughes.com
< 2.2 > KVM port connection
USB Hub DB-15 2-console KVM
CB-6 / CB-10 / CB-15
■ 6 / 10 / 15 ft USB KVM cable
■ Support USB server
USB Servers
DB-15 USB KVM port
USB Servers
CB - 6 / 10 / 15 USB KVM cable
support USB server
UM-CV-751-USBKVM-Q317V3
P.11
www.austin-hughes.com
< 2.3 > Remote & Local console connection
USB Hub DB-15 2-console KVM
Local
USB
console
Remote
Cat6
Console
For remote console, max. cable length is
subject to the resolution.
Please refer to the tables below.
Remote
USB console
Receiver
CAT 5 / 6 cable
Remote Console
Frequency
( Hz )
Max. Cat6 Cable
Length ( M )
1920 x 1080
60
50
1600 x 1200
60
100
1440 x 900
60
100
1280 x 1024
60
150
1024 x 768
60 / 70 / 75
150
Resolution Support
UM-CV-751-USBKVM-Q317V3
P.12
www.austin-hughes.com
How to use a receiver to connect a remote console
Power
Receiver
USB Hub DB-15 2-console KVM
VGA
KB
Local
Computer Remote I/O
Front
Mouse
Remote
LED
Local
LED
Rear
Select button
The receiver provides a hotkey function for remote console. Please refer to P.23
Remote
Console
Local computer
( Optional setup )
Cat6 cable
up to 150m
CE-6
Combo
KVM cable
Front
12V DC Power
Adapter
VGA
cable
Monitor
UM-CV-751-USBKVM-Q317V3
P.13
www.austin-hughes.com
< 2.4 > Built-in USB Hub Usage & Connection
USB Hub DB-15 2-console KVM
2 x USB 2.0 ( USB hub for device connection )
Flash Disk
Hard disk storage
Keyboard / Mouse
Scanner
Printer
Camera
UM-CV-751-USBKVM-Q317V3
P.14
www.austin-hughes.com
< 2.5 > Specifications
USB Hub DB-15 2-console KVM
CV-802H
▀
▀
▀
▀
▀
▀
▀
▀
▀
CV-1602H
KVM Port
Number of ports :
8 or 16
Connector :
DB-15 combo connector
Connectivity :
Combo 2-in-1 VGA + USB KVM cable, 6, 10 or 15 feet
Local Console
Graphic connector :
1 x DB-15
Input device :
2 x USB type A for keyboard & mouse
USB hub :
2 x USB type A for sharing other peripheral devices among the computers
Resolution support :
4:3 - max. 1600 x 1200,
16:10 - max. 1920 x 1200
Remote Console
Connector :
1 x DB 15-pin, VGA
Input device :
2 x USB type A for keyboard & mouse
Remote I/O :
RJ45 via Cat5 / Cat5e / Cat6 cable up to 150m
Compensation :
Auto adjust for cable length
Resolution support :
4:3 - max. 1600 x 1200,
16:9 - max. 1920 x 1080
Compatibility
Hardware :
HP / IBM / Dell PC, Server and Blade Server
SUN / Mac
OS Support :
Windows / Linux / Unix / Mac OS
Power
Input:
Auto sensing 100 to 240VAC, 50 / 60 Hz
Option DC :
12V / 24V / 48V / 125V / 250V DC input
Consumption :
Max. 12W
Regulatory
Safety :
FCC & CE certified
Environment :
RoHS2 & REACH compliant
Environmental
Operating
Storage / Non-operating
Temperature :
0 to 55°C degree
-20 to 60°C degree
Humidity :
20~90%, non-condensing
5~90%, non-condensing
Altitude :
16,000 ft
40,000 ft
Shock :
-
10G acceleration (11ms duration)
Vibration :
-
5~500Hz 1G RMS random
Product Information
Dimension (W x D x H) :
443 x 171 x 44 mm / 17.4 x 6.7 x 1.73 inch
Net weight :
3 kg / 6.5 lb
Packing Information
Dimension (W x D x H) :
500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch
Gross weight :
5 kg / 11 lb
UM-CV-751-USBKVM-Q317V3
P.15
www.austin-hughes.com
Part 3. USB Hub DB-15 KVM
< 3.1 > Package Contents
USB Hub DB-15 KVM
CV-801H / CV-1601H
KVM unit
Power
•
CV-801H or CV-1601H KVM unit x 1
•
Mounting set w/ bracket & screws x 1
•
Power cord ( for KVM ) x 1
CV-801H
Local Console
12VDC
2 x USB 2.0
( USB hub for device connection )
CV-1601H
Daisy-chain feature for this model is NOT available.
UM-CV-751-USBKVM-Q317V3
P.16
www.austin-hughes.com
< 3.2 > KVM port connection
USB Hub DB-15 KVM
CB-6 / CB-10 / CB-15
■ 6 / 10 / 15 ft USB KVM cable
■ Support USB server
USB Servers
DB-15 USB KVM port
USB Servers
CB - 6 / 10 / 15 USB KVM cable
support USB server
UM-CV-751-USBKVM-Q317V3
P.17
www.austin-hughes.com
< 3.3 > Built-in USB Hub Usage & Connection
USB Hub DB-15 KVM
2 x USB 2.0 ( USB hub for device connection )
Flash Disk
Hard disk storage
Keyboard / Mouse
Scanner
Printer
Camera
UM-CV-751-USBKVM-Q317V3
P.18
www.austin-hughes.com
< 3.4 > Specifications
USB Hub DB-15 KVM
CV-801H
▀
▀
▀
▀
▀
▀
▀
▀
▀
CV-1601H
KVM Port
Number of ports :
8 or 16
Connector :
DB-15 combo connector
Connectivity :
Combo 2-in-1 VGA + USB KVM cable, 6, 10 or 15 feet
Local Console
Graphic connector :
1 x DB-15
Input device :
2 x USB type A for keyboard & mouse
USB hub :
2 x USB type A for sharing other peripheral devices among the computers
Resolution support :
4:3 - max. 1600 x 1200,
16:10 - max. 1920 x 1200
Management
Multilingual OSD :
English, France, German, Spanish, Italian, Russian, Simplified Chinese,
Japanese
Hotkey combination :
Scroll-lock, Cap-lock, Num-lock, Alt, Ctrl & Win
Security :
Password enable & disable, up to 8 users profile for port access
PC Selection :
Front button, OSD menu & hotkey
Compatibility
Hardware :
HP / IBM / Dell PC, Server and Blade Server
SUN / Mac
OS Support :
Windows / Linux / Unix / Mac OS
Power
Input :
Auto sensing 100 to 240VAC, 50 / 60 Hz
Option DC :
12V / 24V / 48V / 125V / 250V DC input
Consumption :
Max. 10W
Regulatory
Safety :
FCC & CE certified
Environment :
RoHS2 & REACH compliant
Environmental
Operating
Storage / Non-operating
Temperature :
0 to 55°C degree
-20 to 60°C degree
Humidity :
20~90%, non-condensing
5~90%, non-condensing
Altitude :
16,000 ft
40,000 ft
Shock :
-
10G acceleration (11ms duration)
Vibration :
-
5~500Hz 1G RMS random
Product Information
Dimension (W x D x H) :
443 x 171 x 44 mm / 17.4 x 6.7 x 1.73 inch
Net weight :
3 kg / 6.5 lb
Packing Information
Dimension (W x D x H) :
500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch
Gross weight :
5 kg / 11 lb
UM-CV-751-USBKVM-Q317V3
P.19
www.austin-hughes.com
Part 4. Usage
USB Hub DB-15 KVM Usage
4.1 KVM Button
Power ON
■ Turn off all servers and KVM switches
■ Make sure all cables / connectors are properly connected
■ Recommend Power ON sequence is monitor, KVM switch finally computer
Front Panel - Port LED Indications
8 ports
Bank no.
PC port LEDs
Channel
button
Button B is
non-functional
16 ports
Bank no.
7-Segment BANK LED indication ( Bank 1 only )
PC port LEDs
Online : Blue LED on indicating a PC is connecting to the port
Active : Green LED on indicating a selected channel
Channel button
UM-CV-751-USBKVM-Q317V3
Press to select channel from 01 to 16
P.20
www.austin-hughes.com
4.2 Password
USB Hub DB-15 KVM Usage
The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on
number pad)
■ Enable password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P
3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field
(Do not use “0” on number pad)
4. In USER level, press Space bar + Enter in user name & password field
Remark: Automatic logout after 10 minutes of inactivity
■
Set your own user name & password
1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name & password
field
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Set password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password
b. In the row 1 to 8 (USER), press Enter to set your own user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character
■
Change your password
1. Login the KVM in SUPERVISOR level by pressing your own user name & password
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Change password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password
b. In the row 1 to 8 (USER), press Enter to change your user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character
■
■
Disable your password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll
3. You don’t need user name & password to access the KVM OSD menu
Lock + P
Forget your password
Please contact your supplier for further support
Remark:
You must press the KVM hotkey within 2 seconds
A beep sound will be heard for successful entering KVM hotkey
■
■
UM-CV-751-USBKVM-Q317V3
P.21
www.austin-hughes.com
4.3 KVM OSD
USB Hub DB-15 KVM Usage
OSD Menu
OSD operation
next to the system name
The PC is powered on
next to the system name
The PC is selected
F1
Access F1 MAIN MENU
F2
Logout the OSD menu
F3
Previous menu
Esc
Cancel / Quit
Enter
Complete / Switch to selected port
Switch to previous or next port
F1 Main Menu
01 LANGUAGE
OSD language change
02 PORT NAME EDIT
Define port name
03 PORT SEARCH
Quick searching by port name
04 USER SECURITY
Change password
05 ACCESS LIST
Define user access authority
06 HOTKEY
Change hotkey
07 TIME SETTINGS
Modify scan display time interval
08 OSD MOUSE
Modify OSD mouse speed
UM-CV-751-USBKVM-Q317V3
P.22
www.austin-hughes.com
4.4 KVM Hotkey & Remote Console Hotkey
USB Hub DB-15 KVM Usage
Local Console Hotkey
Function
Scroll Lock + Scroll Lock + Space Bar
Calling OSD menu
Right-button mouse + Esc
Calling OSD menu
Scroll Lock + Scroll Lock +
Switch to previous port
Scroll Lock + Scroll Lock +
Switch to next port
Scroll Lock + Scroll Lock +
Port no.
Switch to specific port
Scroll Lock + Scroll Lock +
B
Turn the buzzer ON and OFF
* Default the buzzer is ON
Scroll Lock + Scroll Lock +
P
Logout the KVM if password security is
ON. Show up the status windows
Advance hotkeys (for Supervisor login only)
Scroll Lock + Scroll Lock +
S
Activate auto-scan mode for connected
servers
*Press any key to exit the auto-scan
mode
Scroll Lock + Scroll Lock +
R
Reset all the KVM settings to factory
default
*Except User Security settings
Scroll Lock + Scroll Lock +
U
Disable and enable password security
*Default security is ON
Scroll Lock + Scroll Lock +
L
To enable / disable the screen saving
function and 10 minutes auto-logout
*Default the screen saving is OFF
Remarks:
■ Example of “Scroll Lock + Scroll Lock + Port no.”
- Port No. : 01 to 16
- e.g. Port 4 : Scroll Lock + Scroll Lock + 0 + 4
- e.g. Port 16 : Scroll Lock + Scroll Lock + 1 + 6
■ You must press the hotkey within 2 seconds
■ A beep sound will be heard for successful entering
■ The numeric keypad is not supported, while in OSD screen, the arrow keys, and Enter keys
are supports
Remote Console Hotkey
Function
Scroll Lock + Scroll Lock +
C
Toggle switch between remote & local port
Scroll Lock + Scroll Lock +
Q
Turn the buzzer ON & OFF
*Default the buzzer is ON
Scroll Lock + Scroll Lock +
S
Activate auto-scan mode for remote & local port
*The scan time interval is 5 seconds
Scroll Lock + Scroll Lock +
A
Auto-adjust the video signal
UM-CV-751-USBKVM-Q317V3
P.23
www.austin-hughes.com
4.5 Options : DC Power
Model
12V
USB Hub DB-15 KVM Usage
24V
48V
125V
250V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
110-Volt
300-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
66 ~ 160V
180 ~ 425V
- No load
50 mA
50 mA
50 mA
35 mA
10 mA
- Full load
4950 mA
2450 mA
1220 mA
749 mA
600 mA
Output voltage:
12-Volt
12-Volt
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
6.25A
12.5A
Efficiency
84%
85%
85%
91%
86%
Input current
Output rating
***
For DC power option :
( 1 ) If the unit with LCD, earthing
may be required
( 2 ) DC power excludes AC power cord.
The company reserves the right to modify product specifications without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2017 Austin Hughes Electronics Ltd. All rights reserved.
UM-CV-751-USBKVM-Q317V3
P.24
www.austin-hughes.com