Alcatel-Lucent OmniAccess Instant for OmniAccess Instant Access

Alcatel-Lucent OmniAccess Instant for
OmniAccess Instant Access Points 92, 93,105, 134 and 135
INSTANT VIRTUALIZATION OF OMNIACCESS WLAN SWITCH /CONTROLLER
The Alcatel-Lucent OmniAccess lnstant virtualizes Alcatel-Lucent OmniAccess Mobility Controller
capabilities on 802.11n access points (APs), creating a feature-rich, enterprise-grade wireless LAN (WLAN)
that delivers the affordability and simplicity of an entry-level Wi-Fi® network.
IAP93
IAP92
IAP105
IAP134
Offering impressive scalability,
the OmniAccess Instant can be
installed at a single site or
deployed across multiple
geographically-dispersed
locations. Up to 16 OmniAccess
Instant Access Points (IAPs) can be
controlled by a single IAP that
automatically becomes a primary
virtual controller. In the event of
primary virtual controller failure,
another OmniAccess IAP
automatically takes on the role
with no disruption.
The OmniAccess Instant
product family consists of five
IAPs: the OmniAccess IAP92,
OmniAccess IAP93, OmniAccess
IAP1O5, OmniAccess IAP 134
and OmniAccess IAP 135.
IAP134 and IAP135 maximize
mobile device performance in
extremely high-density Wi-Fi
client environments and
provide strong threat
protection with integrated
IEEE 802.1AE MACsec security.
IAP105 brings affordability to
high-density Wi-Fi areas, while
IAP135
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
the single-radio IAP92 and
IAP93 optimize mobile device
performance in low-density WiFi environments.
Virtual-controller technology
The virtual-controller
technology in the OmniAccess
Instant delivers enterprisegrade capabilities such as AP
auto discovery, 8O2.1X
authentication, role- and device-based
policy enforcement, rogue
detection and OmniAccess
Adaptive Radio Manage- ment
(ARM), which optimizes Wi-Fi
client behavior by ensuring the
APs remain free from RF
interference.
Ease of deployment
OmniAccess Instant is up and
running in minutes. From a
laptop, simply connect
wirelessly to a SSID to perform
over-the-air provisioning in
three easy steps. To expand,
just install more OmniAccess
IAPs; configurations are
automatically uploaded from
the designated virtual
controller.
1
IAP MODEL
SPATIAL
STREAMS
RADIOS
ANTENNAS
THROUGHPUT PER
RADIO
IAP135
3x3 MIMO
Two (2.4 and 5 GHz)
Internal
450 Mbps
IAP134
3x3 MIMO
Two (2.4 and 5 GHz)
External
450 Mbps
IAP104
2x2 MIMO
Two (2.4 and 5 GHz)
Internal
300 Mbps
IAP93
2x2 MIMO
One (2.4 or 5 GHz)
Internal
300 Mbps
IAP92
2x2 MIMO
One (2.4 or 5 GHz)
External
300 Mbps
Management and visibility
Multiple OmniAccess Instant
networks can be securely and
centrally managed by the AlcatelLucent OmniVistaM 3600 Air
Manager, allowing the OmniAccess
Instant to operate hundreds of
remote locations. With the
OmniVista 3600 Air Manager, IT has
real-time visibility into users,
mobile devices and OmniAccess
WLANs from a single management
console.
Investment Protection
As WLAN requirements expand, the
OmniAccess Instant can be reimaged as an 802.11n campus AP
FEATURES
and migrated to a centralized
OmniAccess Mobility Controller
architecture that supports up to
2048 APs. In addition to providing
WLAN access, APs in a centralized,
controller architecture can provide
wireless intrusion protection and
powerful spectrum-analysis
capabilities.
BENEFITS
Virtual Mobility Controller
Enables any IAP to be the controller, eliminating
the need for a dedicated controller
Autoselection of virtual Mobility Controller
Autoselects controller with redundancy, enabling
ease of use with always-on redundancy
One-touch, over-the-air provisioning,
autodiscovery and autoconfiguration
Offers one-touch, over—the-air provisioning of
first lAP, and auto-discovery and auto-
Centralized management of multiple
instant networks
Centrally and securely manage multiple
OmniAccess lnstant networks using OV3600 Air
Re-image IAP to campus AP
Re-images IAP to campus APs, providing
investment protection because same
APs meet new network expansion and
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
2
Application
• Cost-effective indoor 802.11n single- or dual-radio,
dual-band APs for low- to extremely high-density
deployments.
Operating Mode
• Supported frequency bands (country-specific
restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
• 802.11a/b/g/n AP
- 5.470 to 5.725 GHz
• Spectrum monitor
5.725 to 5.850 GHz
• Air monitor (AM)
Radios
• Software-configurable single/dual radio capable of
supporting 2.4 GHz and 5 GHz
• IAP-134/IAP-135: Dual radio 802.11n-capable,
implementing 3x3 MIMO with three spatial streams,
providing up to 450 Mbps data rate per radio
• IAP-105: Dual radio 802.11n-capable,
implementing 2x2 MIMO with two spatial streams,
providing up to 300 Mbps data rate per radio
• IAP-92/IAP-193: Single radio 802.11n-capable,
implementing 2x2 MIMO with two spatial streams,
providing up to 300 Mbps data rate per radio
• Available channels: dependent upon configured
regulatory domain
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum
(DSSS)
- 802.11a/g/n: Orthogonal frequency division
multiplexing (OFDM)
- 802.11n: 2x2 MIMO with 2 spatial streams
(IAP-105, IAP-92, IAP-93)
- 802.11n: 3x3 MIMO with 3 spatial streams
(IAP-134, IAP-135)
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
RF Management
• Automatic transmit power and channel
management control with auto coverage-hole
correction via Adaptive Radio Management (ARM)
• Spectrum analysis remotely scans the 2.4-GHz
and 5-GHz radio bands to identify sources of RF
interference. This provides visibility into non802.11 RF interference sources and their effect on
802.11n channel quality.
Advance Features
• IEEE 802.1AE MACsec (IAP-134 and IAP-135)
• Wireless intrusion detection and prevention
• Secure enterprise mesh
• Integrated Trusted Platform Module (TPM) for
secure storage of credentials and keys
• RADIUS support
• Bandwidth limiting
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5
dBm
• Maximum transmit power:
- 2.4GHz: 23 dBm (limited by local regulatory
requirements)
- 5 GHz: 23 dBm (limited by local regulatory
requirements)
• Maximum ratio combining (MRC) for improved
receiver performance
• IAP-134/IAP-135
- Space Time Blocking Code (STBC) for increased
range and improved reception
- Low Density Parity Check (LDPC) for high
efficiency error correction and increased
throughput
- Transmit Beam-forming (TxBF) ready platform
for increased reliability in signal delivery
Wireless Radio Specifications
• Association rates (Mbps):
• AP type: Single-radio/Dual-radio, dual-band
- 802.11b: 1, 2, 5.5, 11
802.11n indoor
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
3
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: MCS0-MCS15/6.5 Mbps-300 Mbps
(IAP-105, IAP-92, IAP-93)
- 802.11n: MCS0-MCS23/6.5 Mbps-450 Mbps
(IAP-134, IAP-135)
• 802.11n high-throughput (HT) Support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU
• Network:
- 1 x 10/100/1000BASE-T Ethernet (RJ-45),
auto-sensing link speed and MDI/MDX
• Power:
- 1 x DC power connector
• Other:
- 1 x RJ-45 console interface
Power
IAP-134 and IAP-135
• 48 V DC 802.3af power over Ethernet
• Network:
• 12 V DC for external AC supplied power (adapter
sold separately)
- 2x10/100/1000BASE-T Ethernet (RJ-45), autosensing link speed and MDI/MDX
• Maximum power consumption:
- 802.1AE MACsec connectionless data
confidentiality and integrity
- IAP-92/93: 10 watts
- IAP-105: 12.5 watts
- IAP-134/135
- When powered from 802.3at PoE or DC: 14
watts
- When powered from 802.3af PoE: 12.5 watts
Antenna
• AP-134: Three RP-SMA antenna interfaces for
external dualband antennas
• AP-135: Six internal downtilt omni-directional
antennas; three per frequency band
- 802.3az (EEE)
- 48 V DC 802.3af PoE or 802.3at PoE+
interoperable with intellisource power sourcing
equipment (both ports)
• Antenna (model AP-134 only):
-3 x RP-SMA antenna interfaces (supports up to
3x3 MIMO)
• Other:
- 1 x RJ-45 console interface
Mounting
• Standard:
- 2.4 to 2.5 GHz/3.5 dBi
- Wall
- 5.150 to 5.875 GHz/4.5 dBi
- Tool-less ceiling tile rail (15/16”)
• IAP-105: 4 x integrated, omni-directional
antenna elements (supporting up to 2x2 MIMO with
spatial diversity). Maximum antenna gain:
- 2.4 GHz/2.5 dBi
- 5.150 GHz to 5.875 GHz/4.0 dBi
• IAP-92: Dual, RP-SMA interfaces for external
antenna support
• IAP-93: Integrated, omni-directional antenna
elements (supporting up to 2x2 MIMO with spatial
diversity)
- 2.4 GHz/2.5 dBi
- 5 GHz/5.8 dBi
Interfaces
• Mounting kit:
- Desk stand and wall outlet mount plate
- Solid wall mount bracket
- Wall box mount bracket (fits standard US
single gang wall boxes)
- Ceiling tile rail adapters (15/16” & 9/16”
recessed or nonrecessed)
• Optional mounting kit:
- Wall-mount bracket for offset wall mounting,
providing spacing between wall and unit
(cable bend radius)
• Security:
- Kensington security lock point.
IAP-105, IAP-92 and IAP-93
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
4
Mechanical
• Dimensions/weight (unit):
- IAP-134 and IAP-135:
- Temp: -40° C to +70° C (-40° F to +158° F)
Regulatory
• FCC/Industry of Canada
170 mm x 170 mm x 45 mm
• R&TTE Directive 1995/5/EC 72/23/EECC
(6.69” x 6.69” x 1.77”), 760 g (1.68 lb)
• EN 300 328
- IAP-105: 132 mm x 135 mm x 45 mm
(5.2” x 5.3” x 1.8“), 0.3 kg (10.56 oz)
- IAP-92 and IAP-93:
• EN 301 893
• CB Scheme Safety, cTUVus
• Korea KCC
120 mm x 130 mm x 35 mm
• Mexico NOM/COFETEL
(4.7” x 5.1” x 1.4“) 255 g (9 oz)
• UL2043 Compliant
• Dimensions/weight (shipping):
- IAP-134 and IAP-135:
• CE Marked
• Low Voltage Directive
285 mm x 240 mm x 70 mm
• EN 301 489
(11.22” x 9.45” x 2.76”), 1,050 g (2.31 lb)
• UL/IEC/EN 60950
- IAP-105:
• Japan MIC/VCCI
195 mm x 170 mm x 55 mm
• Brazil ANATEL
(7.7” x 6.7” x 2.2“), 0.44 kg (15.52 oz)
• China SRRC/CCC
- IAP-92 and IAP-93:
• AS/NZS 4260, 4771, 3548
180 mm x 155 mm x 45 mm
Warranty
(7.1” x 6.1” x 1.8”), 375 g (13.2 oz)
• Limited lifetime warranty
Environmental
Certifications
• Operating:
• Wi-Fi certified 802.11a/b/g/n
- Temp: 0° C to 50° C (+32° F to +122° F)
- Humidity: 5% to 95% non-condensing
• Storage and transportation temperature range:
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
5
Ordering Information
PART NUMBER
DESCRIPTION
OMNIACCESS INSTANT ACCESS POINTS
OAW-IAP135
OmniAccess Instant AP135 Wireless Access Point, 802.11abgn, 3x3:3, dual radio,
integrated antennas. Unrestricted Regulatory Domain. These products should be
considered as `Rest of World` products and MUST NOT be used for deployments
in the United States, Japan or Israel
OAW-IAP134
OmniAccess Instant AP134 Wireless Access Point, 802.11abgn, 3x3:3, dual
radio,antenna connectors. Requires external antenna. Unrestricted Regulatory
Domain. These products should be considered as `Rest of World` products and
MUST NOT be used for deployments in the United States, Japan or Israel
OAW-IAP92
OmniAccess IAP92 wireless AP, 802.11abgn, dual-band, single radio, with
external antenna connectors (RP-SMA)
OAW-IAP93
OmniAccess IAP93 wireless AP, 802.11abgn, dual-band, single radio, integrated
antennas
OAW-IAP105
OmniAccess IAP105 wireless AP, dual-radio IEEE 802.11a/b/g/n wireless AP with
support for 802.11B/G/N and 802.11A /N operation, dual-band integral antenna,
1 x 10/100/1000Base-T (RJ-45) Ethernet interface (supports 802.3af PoE), 1 x
12-V DC power interface; AC power adapter kit (OAW-AP-AC-UN) sold separately
OMNIACCESS IAP ACCESSORIES
OAW-AP-AC-UN
OmniAccess AP92, AP93, AP105 universal AC power adapter kit - North
America, Japan, United Kingdom, Italy, EC (Shuko), Australia, China, India,
Korea
OAW-AP90-MNT
OmniAccess IAP90 series AP wall or ceiling mounting it
OAW-AP105-MNT
OmniAccess IAP105 wall or ceiling mounting kit
OAW-AP105-MNTC
OmniAccess IAP105 ceiling mounting kit, rail adapters only
OAW-MS-3501G
1 Port 802.3af PoE MS 10/100/1000 15.4 W
RF Performance Table
IAP-134 and IAP-135
Receive
Sensitivity
(dBm)
Transmit power per
active transmit
chain
(dBm)
2.4 GHz
802.11b
1 Mbps
11 Mbps
802.11a/g
6 Mbps
54 Mbps
802.11n HT20
Receive
Sensitivity
(dBm)
Transmit power per
active transmit
chain
(dBm)
5 GHz
18
18
-96
-96
18
16
-96
-86
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
18
16
-96
-86
6
MCS0/8/16
MCS7/15/2
802.11n HT40
MCS0/8/16
MCS7/15/2
18
12
-96
-81
18
12
-96
-81
18
12
-91
-76
18
12
-91
-76
IAP-105
IAP-92/IAP-93
Max TX
RX
Max TX
RX
Max TX
RX
Max TX
RX
power per sensitivity power per Sensitivity power per Sensitivity power per
Sensitivity
active TX
(dBm)
active TX
(dBm)
active TX
(dBm)
active TX
(dBm)
chain (dBm)
chain (dBm)
chain (dBm)
chain (dBm)
2.4 GHz
5 GHz
2.4 GHz
5 GHz
802.11b
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps
802.11a/g
6 Mbps
9 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
802.11n HT20
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS10
MCS11
MCS12
MCS13
MCS14
MCS15
802.11n HT4
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS10
20
20
20
20
-96
-96
-94
-93
18
18
18
18
-96
-96
-94
-93
20
20
20
20
20
19
18
17
-96
-96
-96
-95
-92
-89
-85
-83
20
20
20
20
20
19
18
17
-96
-96
-96
-95
-91
-88
-84
-83
18
18
18
18
18
15
14
14
-93
-93
-87
-87
-85
-82
-80
-80
18
18
18
18
18
15
14
14
-93
-93
-87
-87
-85
-82
-80
-80
20
20
20
20
19
18
17
15
20
20
20
20
19
18
17
15
-96
-95
-93
-90
-87
-82
-81
-80
-95
-93
-91
-87
-84
-81
-80
-77
20
20
20
20
19
18
17
15
20
20
20
20
19
18
17
15
-96
-94
-92
-89
-86
-82
-80
-79
-95
-92
-90
-87
-84
-80
-78
-77
18
17
17
16
16
15
14
13
18
17
17
16
16
15
14
13
-93
-93
-87
-87
-83
-80
-77
-75
-93
-93
-87
-87
-83
-80
-77
-75
18
17
17
16
16
15
14
13
18
17
17
16
16
15
14
13
-93
-93
-87
-87
-83
-80
-77
-75
-93
-93
-87
-87
-83
-80
-77
-75
20
20
20
20
19
18
17
15
20
20
20
-93
-93
-90
-86
-83
-79
-77
-76
-92
-89
-87
20
20
20
20
19
18
17
15
20
20
20
-92
-92
-89
-86
-83
-80
-77
-76
-92
-90
-87
18
17
17
16
16
15
14
13
18
17
17
-90
-90
-87
-84
-80
-77
-77
-73
-90
-90
-87
18
17
17
16
16
15
14
13
18
17
17
-90
-90
-87
-84
-80
-77
-77
-73
-90
-90
-87
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
7
MCS11
MCS12
MCS13
MCS14
MCS15
20
19
18
17
15
-84
-82
-76
-76
-73
20
19
18
17
15
-84
-81
-77
-75
-73
16
16
15
14
13
-84
-80
-77
-77
-73
16
16
15
14
13
-84
-80
-77
-77
-73
Maximum capability of the hardware provided. Maximum transmit power will be limited by local regulatory settings.
Antenna Plots
IAP135
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
8
IAP105
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
IAP92/93
9
www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are
trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners. Alcatel-Lucent assumes no responsibility for the accuracy of the information
presented, which is subject to change without notice.© 2012 Alcatel-Lucent. All rights
reserved.
Alcatel-Lucent OmniAccess IAP92, 93, 105, 134, 135 | Datasheet
10