Surface Mount Spring Mount WiFi, 2.4 &

US Office: Tel: 800.648.2800 or +1.847.671.6690
UK Office: Tel: (+44) 1543 459 555
Surface Mount Spring Mount
WiFi, 2.4 & 5 GHz
CA Series
Cable Assemblies
• Integral spring provides strength at
speed and provides flex for overhead
• Ground plane independent designs can
be used on any surface
• Available in models with 5 dBi - 9 dBi
Trunk Lid
Spring Mount
Mobile Mark’s spring mounted ECO Mobile Series antennas cover
popular systems: WiFi 2.4 or 5 GHz, Public Safety 4.9 GHz, 5 GHz
Broadband and DSRC 5.9 GHz. These ECOS antennas are ground plane independent and can be
used on any surface.
High gain coupled with low loss cable compensates for the losses that
occur at higher bands. These models terminate on the bottom with
an SMA Female connector.
The ECO Spring mount antenna allows easy insertion to a vehicle or
bulkhead. A 1 inch hole (2.54 cm) is required for mounting. The base
of the antenna has a locking collar, the internal portion is tilt-in. Metal
teeth on the internal portion secure the inside as the external locking
collar is tightened down. The collar is outfitted with an O-ring, and
has flats for securing with a wrench. • Seperate cable assemblies allow choice
of cable length and connector type.
Spring Mount Omni Models
Model Frequency ECOS5-2400-BLK ECOS8-2400-BLK ECOS6-5500-BLK ECOS9-5500-BLK 2.4 - 2.5 GHz
2.4 - 2.5 GHz
5.0 - 6.0 GHz
5.0 - 6.0 GHz
5 dBi
8 dBi
6 dBi
9 dBi
Add “-TM” for Trunk Lid Mount Option
Color options available for above models
WHT-White or BLK-Black
Mating Cable Assemblies
End Connector
The heavy duty spring maintains the antenna’s vertical position at all
speeds, but will deflect if hit by an obstruction.
CA180/195-CS CA240/195-CS CA180/195-XS CA240/195-XS CA180/195-JS
CA240/195-JS SMA Plug (Male)
SMA Plug (Male)
N Plug (Male)
N Plug (Male)
Rev Pol SMA Pug
Rev Pol SMA Plug
The cable assembly is ordered separately with the appropriate radio
connector. Cable Assemblies use low loss RF-195 cable to improve
efficiency. All antennas are weather proof. Cable assemblies are pre-terminated with right angle SMA for
connection to the antenna, and the desired end connector indicated above. Cables are low loss Belden RF-195 or equivalent.
Frequency: Gain: VSWR Impedance: Maximum Power: Operating Temp: Radome: Base/Mount: Mounting Depth: Base Dimension: Spring: Termination: See above
See above
2:1 over band
50 Ohm nominal
10 Watts
-40o to +85o C
Fiberglass (black)
Brass chrome plated
1/4” thick surface (6.4 mm)
1.5” Diameter (38 mm)
Heavy duty Stainless Steel,
3/4” diameter (19 mm)
SMA Female on bottom
US Office & Headquarters: 1140 W Thorndale Ave, Itasca, IL 60143, USA
UK Office: 8 Miras Business Park, Keys Park Road, Hednesford, Staffs. WS12 2FS, UK
15 ft (4.6 m)
20 ft (6.1m)
15 ft (4.6 m)
20 ft (6.1m)
15 ft (4.6 m)
20 ft (6.1m)
Weight: Height:
5 dBi 6 dBi 6 dBi 9 dBi Under 1 lb (0.45 kg) all models,
not including cable assembly
16.3 in/41 cm
12.5 in/30 cm
24.8 in/63 cm
16.3 in/41 cm
Mounting: Top mount assembly, “tilt-in”
with internal teeth & locking ring
Cable Assemblies: RF-195, with Right angle SMA for the antenna
Specifications subject to change without notice (3/2014)