Register your product and get support at
LED TV series
www.philips.com/welcome
User Manual
32PFH4100
32PFT4100
32PFT4100
32PHH4100
32PHH4200
32PHT4100
32PHT4100
32PHT4200
40PFH4100
40PFH4200
40PFT4100
40PFT4100
40PFT4200
48PFH4100
48PFT4100
48PFT4100
Contents
1 Your new TV
3
13 Settings
3
1.1 Pause TV and recordings
1.2 EasyLink
3
2 Setting up
4
2.1 Read safety
4
2.2 TV stand and wall mounting
2.3 Tips on placement
4
2.4 Power cable
4
2.5 Antenna cable
5
3 Connections
4
14 Specifications
3.1 Tips on connections
6
3.2 EasyLink HDMI CEC
7
3.3 Common interface - CAM
8
3.4 Set-top box - STB
8
3.5 Satellite receiver
9
3.6 Home Theatre System - HTS
9
3.7 Blu-ray Disc player
10
3.8 DVD player
11
3.9 Game console
11
3.10 USB Hard Drive
11
3.11 USB flash drive
12
3.12 Camcorder
12
3.13 Computer
12
3.14 Headphones (For 4000, 4100, 4200, 6300 TV
models)
13
15 Software
5 Remote control
16.1 Troubleshooting
45
16.2 Register
46
16.3 Help
46
16.4 Online help
46
16.5 Consumer Care / Repair
14
17 Safety and care
15
17.1 Safety
48
17.2 Screen care
7 TV guide
8 Sources
Index
24
24
26
8.1 Sources list
26
8.2 From standby
26
8.3 EasyLink
26
9 Timers and clock
27
9.1 Sleep timer
27
9.2 Clock
27
9.3 Auto switch off
27
10 Your photos, videos and music
10.1 From a USB connection
11 Pause TV
11.1 Pause TV
12 Recording
47
48
49
18.1 Terms of use
50
18.2 Copyrights and licenses
17
20
7.1 Using the TV guide
24
7.2 Recordings
24
7.3 Receiving TV guide data
45
18 Terms of use, copyrights and licenses
50
17
6.1 Watching TV channels
6.2 Channel installation
42
16 Troubleshooting and support
5.1 Key overview (For 4000, 4100, 4200, 5210 TV
models)
15
5.2 IR sensor
15
5.3 Batteries
16
5.4 Cleaning
16
6 TV channels
38
15.1 Software update
42
15.2 Software version
42
15.3 Open source software
42
15.4 Open source license
42
14
4.1 On or Standby (For 4100, 4200 TV models)
36
14.1 Environmental
38
14.2 Reception for PxH / PxT models
38
14.3 Display
39
14.4 Power
39
14.5 Dimensions and weights
39
14.6 Connectivity for Pxx4100, Pxx4200
40
14.7 Sound
41
14.8 Multimedia
41
6
4 Switch on
32
13.1 Picture
32
13.2 Game or computer
34
13.3 Format and edges
34
13.4 Sound
34
13.5 Ambilight (For 6300 TV models)
28
28
30
30
31
12.1 What you need
31
12.2 Record a programme
31
12.3 Watch a recording
31
2
52
50
1
Your new TV
1.1
Pause TV and recordings
If you connect a USB Hard Drive, you can pause and
record a broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or
simply take a break during a sports match, while the
TV stores the broadcast on the USB Hard Drive. You
can start watching again later.
1.2
EasyLink
With EasyLink you can operate a connected device,
like a Bluray Disc player, with the remote control of
the TV.
EasyLink uses HDMI CEC to communicate with the
connected devices.
3
M4 (Minimum 10 mm, Maximum 14 mm)
- 32PHT4100/60 - VESA MIS-F 100x100,
M4 (Minimum 12 mm, Maximum 16 mm)
- 40Pxx4100 - VESA MIS-F 200x200, M4 (Minimum
12 mm, Maximum 16 mm)
- 48Pxx4100 - VESA MIS-F 200x200, M6 (Minimum
12 mm, Maximum 16 mm)
2
Setting up
2.1
Read safety
- 32Pxx4200 - VESA MIS-F 100x100, M4 (Minimum
10 mm, Maximum 14 mm)
- 40Pxx4200 - VESA MIS-F 200x200, M4 (Minimum
12 mm, Maximum 16 mm)
Read the safety instructions first before you use the
TV.
In Help, go to Safety and care > Safety.
- 40Pxx6300 - VESA MIS-F 200x200, M6 (Minimum
14 mm, Maximum 24 mm)
- 48Pxx6300 - VESA MIS-F 400x400, M6 (Minimum
14 mm, Maximum 24 mm)
- 55Pxx6300 - VESA MIS-F 400x400, M6 (Minimum
14 mm, Maximum 24 mm)
2.2
TV stand and wall mounting
TV stand
Caution
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
In case you lost this guide, you can download it from
www.philips.com.
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TV's weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
Use the product type number of the TV to look for the
Quick Start Guide to download.
Wall mounting
2.3
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
To fix the bracket securely, use screws with a length
indicated in the drawing.
Tips on placement
- Position the TV where light does not shine directly
on the screen.
- Position the TV up to 15 cm away from the wall.
- The ideal distance to watch TV is 3 times its
diagonal screen size. When seated, your eyes should
be level with the centre of the screen.
2.4
Power cable
- Insert the power cable into the POWER connector
on the back of the TV.
- Make sure the power cable is securely inserted in
the connector.
- Make sure that the power plug, in the wall socket, is
accessible at all times.
- When you unplug the power cable, always pull the
plug, never pull the cable.
- 22Pxx4000 - VESA MIS-F 75x75, M4 (Minimum 10
mm, Maximum 10.5 mm)
- 24Pxx4000 - VESA MIS-F 75x75, M4 (Minimum 10
mm, Maximum 10.5 mm)
- 24PHx5210 - VESA MIS-F 75x75, M4 (Minimum 10
mm, Maximum 10.5 mm)
- 32PFx4100 - VESA MIS-F 100x100, M4 (Minimum
10 mm, Maximum 14 mm)
- 32PHx4100/12 - VESA MIS-F 100x100,
M4 (Minimum 10 mm, Maximum 14 mm)
- 32PHx4100/88 - VESA MIS-F 100x100,
4
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
2.5
Antenna cable
Insert the antenna plug firmly into the ANTENNA
socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
5
3
Connections
3.1
Tips on connections
EasyLink HDMI CEC
Connectivity guide
If your devices are connected with HDMI and have
EasyLink, you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched On on
the TV and the connected device.
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a
good transfer of picture and sound.
DVI to HDMI
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The
guide offers information on how to connect and
which cables to use.
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use one of the HDMI connections
and add an Audio L/R cable (mini-jack 3.5mm) to
Audio In for sound, on the back of the TV.
Go to www.connectivityguide.philips.com
Copy protection
Antenna
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
If you have a Set-top box (a digital receiver) or
Recorder, connect the antenna cables to run the
antenna signal through the Set-top box and/or
Recorder first before it enters the TV. In this way, the
antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI ARC
HDMI 1 connection on the TV have HDMI ARC (Audio
Return Channel). If the device, typically a Home
Theatre System (HTS), also has the HDMI ARC
connection, connect it to HDMI 1 on this TV. With the
HDMI ARC connection, you do not need to connect
the extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
In case you prefer to switch off ARC on the HDMI
connections, press  and select Setup and
press OK. Select TV
settings > Sound > Advanced > HDMI 1 - ARC.
Scart
HDMI
SCART is a good quality connection. The SCART
connection can be used for CVBS and RGB video
signals but cannot be used for High Definition (HD) TV
signals. The SCART connection combines video and
audio signals.
HDMI CEC
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for High Definition (HD) or
Full HD (FHD) TV signals. For best signal quality
transfer, use a High speed HDMI cable and do not use
an HDMI cable longer than 5 m.
Use the SCART adapter cable to connect your device.
6
EasyLink setup
The TV comes with EasyLink switched on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.
Example HDMI CEC branding names are property of
their respective owners.
Audio Out - Optical
Audio Out - Optical is a high quality sound
connection. This optical connection can carry 5.1
audio channels. If your device, typically a Home
Theatre System (HTS), has no HDMI ARC connection,
you can use this connection with the Audio In Optical connection on the HTS. The Audio Out Optical connection sends the sound from the TV to
the HTS.
Operate devices (For 4000, 4100,
4200, 5210 TV models)
To operate a device
connected to HDMI and set
up with EasyLink, select the
device - or its activity - in the
list of TV connections.
Press  SOURCES , select a
device connected to an HDMI
connection and press OK.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theatre System.
If the sound does not match the video on screen, you
can adjust the audio to video synchronization.
3.2
EasyLink HDMI CEC
EasyLink
Once the device is selected, the TV remote control
can control the device.
However  and  OPTIONS keys and some
other TV keys are not forwarded to the device.
If the key you need is not on the TV remote control,
you can select the key in the Options menu.
Press  OPTIONS and select Controls in the
menu bar. On the screen, select the device key you
need and press OK.
Some very specific device keys might not be available
in the Controls menu.
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
Note: Only devices that support EasyLink Remote
Control function will respond to the TV remote
control.
7
Contact a digital TV broadcaster for more information
on terms and conditions.
EasyLink settings
The TV comes with all EasyLink settings switched on.
You can switch off any EasyLink setting
independently.
EasyLink
CAM
To switch off EasyLink completely . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General
settings > EasyLink.
3. Select EasyLink.
4. Select Off and press OK.
5. Press , repeatedly if necessary, to close the
menu.
Insert a CAM module
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion.
Incorrect insertion can damage the CAM and TV.
EasyLink Remote Control
If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can switch off EasyLink remote control separately.
You can control multiple HDMI-CEC compliant
devices with your TV remote control.
Use the Common Interface slot on the TV to insert the
CAM card.
With the front of the card facing to you, gently insert
the CAM as far as it will go.
Leave the card in the slot permanently.
In the EasyLink settings menu, select EasyLink
Remote Control and select Off.
One-touch play
It may take a few minutes before the CAM is
activated. Removing the CAM will deactivate the
broadcast service on TV.
If a CAM is inserted and subscription fees are paid,
(connection methods can differ), you can watch the
TV broadcast. The inserted CAM is exclusively for
your TV.
When you play an HDMI-CEC compliant device, the
TV switches on from standby and switches to the
correct source.
One-touch standby
When you press  on the TV remote control, the TV
and all HDMI-CEC compliant devices switch to
standby mode.
3.4
System audio control
If you connect an HDMI-CEC compliant device that
includes speakers through the HDMI ARC connector,
you can choose to hear the TV audio from those
speakers instead of the TV speakers.
Set-top box - STB
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
3.3
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV
broadcasters in your region. These programmes are
scrambled by the TV broadcaster and descrambled
with a prepaid CI+ module.
Digital TV broadcasters provide this CI+ module
(Conditional Access Module - CAM) when you
subscribe to their premium programmes. These
programmes have a high level of copy protection.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Settop box has no HDMI connection.
Auto switch off
8
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Do this to prevent
the TV from switching off automatically after a 4 hour
period without a key press on the remote control of
the TV.
3.6
Home Theatre System - HTS
Connect HTS
To switch off the Switch off timer, press  and
select Setup and press OK.
Select TV settings > General settings > Auto switch
off and set the slider bar to Off.
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
Alternatively, you can use a SCART cable if the device
has no HDMI connection.
3.5
HDMI ARC
Satellite receiver
HDMI 1 connection on the TV have HDMI ARC (Audio
Return Channel). If the device, typically a Home
Theatre System (HTS), also has the HDMI ARC
connection, connect it to HDMI 1 on this TV. With the
HDMI ARC connection, you do not need to connect
the extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
Connect the dish antenna cable to the Satellite
receiver.
Next to the antenna connection, add an HDMI cable
to connect the device to the TV.
Alternatively, you can use a SCART cable if the device
has no HDMI connection.
If the Home Theatre System has no HDMI ARC
connection, add an optical audio cable (Toslink) to
send the sound of the TV picture to the Home Theatre
System.
Auto switch off
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Do this to prevent
the TV from switching off automatically after a 4 hour
period without a key press on the remote control of
the TV.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
To switch off the Switch off timer, press  and
select Setup and press OK.
Select TV settings > General settings > Auto
switch off and set the slider bar to Off.
9
a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
Audio Out settings
Audio Out delay
To set the Audio Out format . . .
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
1. Press  and select Setup and press OK.
2. Select TV
settings > Sound > Advanced > Audio out format.
3. Select Multichannel or Stereo.
4. Press , repeatedly if necessary, to close the
menu.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is automatically synchronised and
always correct.
Audio sync delay
Audio Out levelling
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to video. On the HTS, increase the delay value until
there is a match between picture and sound. A delay
value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio Out delay on the
TV.
Use the Audio Out leveling setting to level the volume
(loudness) of the TV and the Home Theatre System
when you switch over from one to another. Volume
differences can be caused by differences in sound
processing.
To level the difference in volume . . .
1. Press  and select Setup and press OK.
2. Select TV
settings > Sound > Advanced > Audio out
leveling.
3. If the volume difference is large, select More. If the
volume difference is small, select Less.
Press , repeatedly if necessary, to close the menu.
To switch off the Audio Out delay . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Advanced > Audio out
delay.
3. Select Off and press OK.
4. Press , repeatedly if necessary, to close the
menu.
Audio Out leveling affects both the Audio Out Optical and HDMI ARC sound signals.
Audio Out offset
Problems with HTS sound
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 1ms. Maximum setting is 12ms. The Audio out
delay setting should be switched on.
Sound with loud noise
If you watch a video from a plugged in USB flash drive
or connected computer, the sound from your Home
Theatre System might be distorted.
1. Press  and select Setup and press OK.
2. Select TV
settings > Sound > Advanced > Audio out format.
To synchronise the sound on the TV . . .
1. Press  and select Setup and press OK.
2. Select TV
settings > Sound > Advanced > Audio out offset.
3. Use the slider bar to set the sound offset and
press OK.
4. Press , repeatedly if necessary, to close the
menu.
No sound
If you cannot hear the sound from the TV on your
Home Theatre System, check the following . . .
- Check if you connected the HDMI cable to a HDMI
ARC connection on the Home Theatre System. All
HDMI connections on the TV are HDMI ARC
connections.
Audio Out format
- Check if the HDMI ARC setting on the TV is
switched On.
Go to  > Setup > TV
settings > Sound > Advanced > HDMI 1 -ARC.
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio out
format to Multichannel. With Multichannel, the TV can
send the compressed multichannel sound signal from
10
3.7
HDMI
Blu-ray Disc player
For best quality, connect the game console with an
High speed HDMI cable to the TV
Use a High speed HDMI cable to connect the Blu-ray
Disc player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC,
you can operate the player with the TV remote
control.
3.10
USB Hard Drive
What you need
3.8
If you connect a USB Hard Drive, you can pause or
record a TV broadcast. The TV broadcast must be a
digital broadcast (DVB broadcast or similar).
DVD player
Use an HDMI cable to connect the DVD player to the
TV.
Alternatively, you can use a SCART cable, if the
device has no HDMI connection.
To pause
To pause a broadcast, you need a USB 2.0
compatible Hard Drive with a minimum of 32GB disc
space.
To record
To pause and record a broadcast, you need a
minimum of 250GB disc space.
If the DVD player is connected with HDMI and has
EasyLink CEC, you can operate the player with the TV
remote control.
TV guide
Before you decide to buy a USB Hard Drive to record,
you can check if you can record digital TV channels in
your country.
Press  TV GUIDE on the remote control. If there is
a Record button on the TV guide page, you can
record.
3.9
Game console
11
To stop watching the USB flash drive content, press
 EXIT or select another activity.
To disconnect the USB flash drive, you can pull out
the flash drive anytime.
Installation
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
1. Connect the USB Hard Drive to one of the USB
connections on the TV. Do not connect another USB
device to the other USB ports when formatting.
3.12
Camcorder
HDMI
For best quality, use an HDMI cable to connect the
camcorder to the TV.
2. Switch on the USB Hard Drive and the TV.
3. When the TV is tuned to a digital TV channel, press
 (Pause). Trying to pause will start the formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
3.13
Computer
Connect
You can connect your computer to the TV and use
the TV as a PC monitor.
3.11
USB flash drive
With HDMI
Use an HDMI cable to connect the computer to the
TV.
You can view photos or play your music and videos
from a connected USB flash drive.
With DVI to HDMI
Insert a USB flash drive in one of the USB
connections on the TV while the TV is switched on.
Alternatively, you can use a DVI to HDMI adapter to
connect the PC to HDMI and an audio L/R cable (minijack 3.5mm) to AUDIO IN L/R on the back of the TV.
Settings
Ideal monitor setting
If your computer is added as a Computer type of
device in the Source menu (the list of connections),
the TV is set to the ideal Computer setting
automatically.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press  SOURCE , select USB and press OK.
If you use your computer to watch movies or use it to
play games, you might want to set the TV back to the
12
ideal TV watching or gaming setting.
To set the TV to the ideal setting manually . . .
1. Press  and select
Setup and press
OK.
2. Select TV settings > Picture > Advanced >
Game or compter and press OK.
3. Select Game (for gaming) or
select Computer (for watching a movie) and
press OK.
4. Press , repeatedly if necessary, to close the
menu.
Remember to set the Game or computer setting back
to Computer when you stop playing the game.
3.14
Headphones (For 4000,
4100, 4200, 6300 TV
models)
You can connect a set of
headphones
to  connection on the TV.
The connection is a mini-jack
3.5mm. You can adjust the
volume of the headphones
separately.
To adjust the volume . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Headphone
volume and press OK.
3. Press  (up) or  (down) to adjust the volume.
4. Press , repeatedly if necessay, to close the
menu.
13
4
Switch on
4.1
On or Standby (For 4100,
4200 TV models)
Make sure you plugged in the
mains power on the back of
the TV before you switch on
the TV.
If the red indicator light is off, press the Joystick on
the right side or on the back of the TV to put the TV in
standby - the red indicator will light up.
With the TV in standby, press  onon the remote
control to switch the TV on.
Switch to standby
To switch the TV to standby, press  on the remote
control.
Switch Off
To switch the TV Off, press the Joystick on the right
or on the back. The red indicator light is off. The TV is
still connected to the mains power but consumes a
minimum of energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
14
5
To open or close programme infomation.
Remote control
4.  BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
5.1
5.  HOME
To open or close the home menu.
Key overview (For 4000,
4100, 4200, 5210 TV models)
6.  EXIT
To switch back to watching TV.
7.  OPTIONS
To open or close the Options menu.
Top
8. OK key
To confirm a selection or setting.
9. Arrow / navigation keys
To navigate up, down, left or right.
10.  LIST
To open or close the channel list.
1.  Standby / On
To switch the TV On or back to Standby.
Bottom
2. Playback keys
- Play , to playback
- Pause , to pause playback
- Stop , to stop playback
- Rewind , to rewind
- Fast forward , to go fast forward
- Record , to record now
3.  TV GUIDE
To open or close the TV guide.
4.  SETUP
To open the Settings menu.
1.  Volume
5.  FORMAT
To open or close the Picture format menu.
To adjust the volume level.
2. Number keys and text keypad
To select a TV channel directly or to enter text.
Middle
3. SUBTITLE
To switch subtitles on, off or Automatic.
4.  Mute
To mute the sound or to restore it.
5.  Channel
To switch to the next or previous channel in the
channel list, to open the next or previous page in Text
or start the next or previous chapter on a disc.
6. TEXT
To open or close Text / Teletext.
1.  SOURCES
To open or close the Sources menu - the list of
connected devices.
2. Colour keys
The buttons function follow the on-screen
instructions.
3.
 INFO
15
5.2
IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
5.3
Batteries
1. Slide the battery door in the direction shown by the
arrow.
2. Replace the old batteries with 2
type AAA-LR03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3. Reposition the battery door.
4. Slide it back until it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
5.4
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
16
are installed during installation. Switch to a radio
channel just like you switch to a TV channel.
6
TV channels
6.1
Channel list
Watching TV channels
View all channel list
1. While watching a TV channel, press  LIST to
open the channel list.
2. Press  OPTIONS to open Option menu.
3. Select List, then you can select All, Favourites,
Radio, and New channels.
Switch channels (For 4000, 4100,
4200, 5210 TV models)
To watch TV channels,
press . The TV tunes to the
TV channel you last watched.
Rename channels
You can rename channels in the channel list.
Alternatively, press  to open the Home menu and
select TV and press OK.
1. Select the channel you want to rename in one of
the channel lists.
2. Press  OPTIONS.
3. Select Rename and press OK.
Lock a channel
To prevent children from watching a channel or a
programme, you can lock channels or lock age rated
programmes.
To switch channels, press   or  . If you
know the channel number, type in the number with
the number keys.
Lock a channel
You can lock a channel to prevent children from
watching it. To watch a locked channel you need to
enter the Child lock code. You cannot lock
programmes from connected devices.
Press OK after you entered the number to switch
channel.
To switch back to the previously tuned channel, press
.
To lock a channel . . .
1. While watching a TV channel, press  LIST to
open the Channel list.
2. In any list, select the channel you want to lock.
3. Press  OPTIONS and select Lock channel. In a
channel list, a locked channel is marked with a lock .
To switch to a channel from a channel list
While watching a TV channel, press  LIST to open
the channel lists.
To unlock a channel, select the locked channel in the
channel list, press  OPTIONS , then select Unlock
channel. You will need to enter the Child lock code.
Parental rating
To prevent children from watching a programme not
suitable for their age, you can use an age rating.
Some digital broadcasters have age rated their
programmes. When the age rating of a programme is
equal to or higher than the age you have set as age
rating for your child, the programme will be locked.
To watch a locked programme you must enter the
child lock code. The parental age rating is set for all
channels.
The channel list can have several pages with
channels. To view the next or previous page, press
 + or  .
To close the channel lists without switching channel,
press  LIST again.
Radio channels
To set an age rating . . .
If digital broadcasting is available, digital radio station
17
1. Press  and select Setup and press OK.
2. Select Channel settings > Child lock > Parental
rating and press OK.
3. Enter a 4-digit Child lock code. Enter a 4-digit
Child lock code and confirm. Now you can set an age
rating.
4. Set the age and press OK.
5. Press , repeatedly if necessary, to close the
menu.
6. To switch off the parental age rating,
select None as age setting.
computer.
- 4:3
Display the classic 4:3 format.
Text / Teletext
Text pages (For 4000, 4100, 4200, 5210 TV models)
To open Text (Teletext) while
you are watching TV
channels, press TEXT.
The TV will ask for the code to unlock the programme.
For some broadcasters / operators, the TV only locks
programmes with a higher rating.
Set or change the lock code
To close Text, press TEXT again.
To set the lock code or to change the current code . . .
1. Press  and select Setup and press OK.
2. Select Channel settings > Child lock > Change
code and press OK.
3. If a code is set already, enter the current Child lock
code and then enter the new code twice.
The new code is set.
Forgotten your code?
To override and enter a new child lock code in case
you forget it, enter 8888.
Select a Text page
Picture format
1. Enter the page number with the number keys.
2. Use the arrow keys to navigate.
3. Press a colour key to select a colour-coded subject
at the bottom of the screen.
To select a page . . .
If black bars appear on top and bottom or on both
sides of the picture, you can adjust the picture format
to a format that fills the screen.
Text sub-pages
A Text page number can hold several subpages. The
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press  or .
To change the picture format . . .
1. While watching a TV channel, press  to open
the Picture format menu.
2. Select a format from the list and press OK.
T.O.P. Text pages
The following format can be available according the
picture on screen . . .
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text, press 
OPTIONS and select T.O.P. overview.
- Auto
Adjust the picture format according to the input
source.
Favourite pages
- Super zoom
Removes the black bars on the side of 4:3 broadcasts.
The picture is adjusted to fit the screen.
The TV makes a list of the last 10 Text pages you
opened. You can easily reopen them again in the
Favourite Text pages column.
- Movie expand 16:9
Scale 4:3 format to 16:9. Not recommended for HD or
PC.
1. In Text, select the star in the top left corner of the
screen to show the column of favourite pages.
2. Press  (down) or  (up) to select a page number
and press OK to open the page.
- Wide screen
Stretches the picture to a 16:9 format.
You can clear the list with the option Clear favourite
pages.
- Unscaled
Expert mode for HD or PC input. Pixel for pixel
display. Black bars may appear with pictures from a
Search Text
You can select a word and scan Text for all
18
occurences of this word.
Text setup
1. Open a Text page and press OK.
2. Select a word or number with the arrow keys.
3. Press OK again to jump immediately to the next
occurence of this word or number.
4. Press OK again to jump to the subsequent
occurence.
5. To stop searching, press  (up) until nothing is
selected.
Text language
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1. Press  and select Setup and press OK.
2. Select Channel settings > Languages.
3. Select Primary Teletext or Secondary Teletext.
4. Select your preferred Text languages.
5. Press , repeatedly if necessary, to close the
menu.
Text from a connected device
Some devices that receive TV channels can also offer
Text.
To open Text from a connected device . . .
Text 2.5
1. Press , select the device and press OK.
2. While watching a channel on the device, press
 OPTIONS , select Show device keys and select
the  key and press OK.
3. Press  to hide the device keys.
4. To close Text, press  again.
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5 . . .
1. Press TEXT.
2. While watching the teletext, press  OPTIONS.
3. Select Text 2.5 > Off.
4.Press , repeatedly if necessary, to close the
menu.
Digital Text (UK only)
Some digital broadcasters offer dedicated Digital Text
or interactive TV on their digital TV channels. This
includes normal Text using the number, colour and
arrow keys to select and navigate.
Subtitles and languages
To close Digital Text, press .
Subtitles (For 4000, 4100, 4200, 5210 TV models)
Text options
Switch subtitles on
In Text, press  OPTIONS to select the following . . .
To open the Subtitle menu, press SUBTITLE.
You can set subtitles to Subtitles off, Subtitles
on, or Automatic.
To show subtitles when the broadcasted programme
is not in your language — the language you set for the
TV, select Automatic. Also, this setting will show
subtitles when you mute the sound with .
For analogue channels, subtitles must be made
available in Text.
- Freeze page / Unfreeze page
To stop the automatic rotation of subpages.
- Dual screen / Full screen
To show the TV channel and Text alongside each
other.
- T.O.P. overview
To open T.O.P. Text.
- Enlarge / Normal view
To enlarge the Text page for comfortable reading.
- Reveal
To unhide hidden information on a page.
- Cycle subpages
To cycle subpages when these are available.
- Language
To switch the group of characters that Text uses to
display correctly.
Subtitles for digital channels
- Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
There is no need to set subtitles in Text for digital
channels.
Digital channels can offer several subtitle languages
for a programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of
these languages are available, the TV will show them.
19
If none of the preferred subtitle languages are
available, you can select another subtitle language
which is available.
impaired
Some digital TV channels broadcast special audio and
subtitles adapted for people who are hearing or
visually impaired.
To set the primary and secondary subtitle language . .
.
1. Press  and select Setup and press OK.
2. Select Channel settings and select Languages.
3. Select Primary subtitle language or Secondary
subtitle language and press OK.
4. Select a language and press OK.
5. Press , repeatedly if necessary, to close the
menu.
Menu language
To change the language or the TV menus and
messages . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Menu
language and press OK.
3. Select the language you want and press OK.
4. Press , repeatedly if necessary, to close the
menu.
To select a subtitle language when none of your
preferred languages are available . . .
1. Press  OPTIONS .
2. Select Subtitle language and select a language
you want temporarily and press OK.
6.2
Subtitles for analogue channels
Channel installation
For analogue channels, you need to make the
subtitles available for each channel manually.
Update channels
1. Switch to a channel and press TEXT to open Text.
2. Enter the page number for subtitles, usually 888.
3. Press TEXT again, to close Text.
Automatic update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open Status in the Options menu.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
Audio languages
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to this audio.
If none of the preferred audio languages is available,
you can select another audio language which is
available.
To switch off the message at start up . . .
1. Press  and select Setup and press OK.
2. Select Channel settings and press OK.
3. Select Channel installation > Channel update
message > Off.
To set the primary and secondary audio language . . .
1. Press  and select Setup and press OK.
2. Select Channel settings and select Languages.
3. Select Primary audio language or Secondary
audio language and press OK.
4. Select a language and press OK.
5. Press , repeatedly if necessary, to close the
menu.
To switch off the Automatic channel update . . .
1. Press  and select Setup and press OK.
2. Select Channel settings and press OK.
3. Select Channel installation > Automatic channel
update > Off.
Start an update
To select an audio language when none of your
preferred audio language is available . . .
To start an update yourself . . .
1. Press  and select Setup and press OK.
2. Select Search for channels and press OK.
3. Select Update channels and follow the instructions
on screen. The update may take a few minutes.
1. Press  OPTIONS .
2. Select Audio language and select an audio
language you want temporarily and press OK.
Audio languages for the hearing and visually
20
In certain countries, the Automatic channel update is
done while watching TV or any moment when the TV
is in standby.
Channel list copy
New channels
Channel list copy is intended for dealers and expert
users. In some countries, Channel list copy is only
availble for copying satellite channels.
Introduction
New channels added with the automatic channel
update are easy to find in the channel list New. The
same new channels are also stored in the All or
Radio channel list.
With Channel list copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel list copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
New channels are kept in the channel list New as
long as you don't mark them as a favourite or tune to
them.
Conditions
- Both TVs are from the same year range.
- Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA
- Both TVs have compatible software versions.
Reinstall channels
You can search for and reinstall channels and leave
all other TV settings untouched. Alternatively, you can
do a full new TV installation.
Current version
If a child lock code is set, you will need to enter this
code before you can reinstall channels.
You can check the current version of the TV software
with Current software info in
 > Setup > Software settings.
Reinstall channels
To reinstall the channels only . . .
1. Press  and select Setup and press OK.
2. Select Search for channels > Re-install
Channels and press OK.
3. Select the country where you install the TV.
4. Select Antenna (DVB-T) or Cable (DVB-C) . The
channel search may take a few minutes. Follow the
instructions on screen.
Copy channel list
To copy a channel list . . .
1. Switch on the TV which has its channels installed.
Plug in a USB memory device.
2. Press  and select Setup and press OK.
3. Select TV settings > General settings > Copy
channel list > Copy to USB and press OK. To copy
the channel list from this TV, you might be asked to
enter the Child lock code you entered during the
installation.
4. When copying is done, unplug the USB memory
device.
Full installation
To redo a full TV installation . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Reinstall
TV and press OK. The installation may take a few
minutes. Follow the instructions on screen.
Factory settings
Now you can upload the copied channel list onto
another Philips TV.
Factory settings sets the TV back to the original TV
settings for picture and sound. To switch back to the
original Factory settings . . .
Upload channel list
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Factory
settings and press OK.
3. Press OK to confirm.
4. Press , repeatedly if necessary, to close the
menu.
Upload a copied channel list
Depending on whether your TV is already installed or
not, you must use a different way to upload a channel
list.
To a TV that is not yet installed
1. Plug in the power plug to start the installation and
select language and country. You can skip Search for
channels. Finish the installation.
2. Plug in the USB memory device that holds the
channel list of the other TV.
21
3. To start the channel list upload, press  and
select Setup and press OK.
4. Select TV settings > General settings > Copy
channel list > Copy to TV and press OK. You might
be asked to enter the Child lock code of this TV.
5. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB memory device.
It might be necessary to adjust the scanning (full or
quick scan) or enter a specific symbol rate in the
Settings menu while installing. To set a Symbol rate,
first set the Symbol rate to Manual.
Channel number conflicts
In some countries, different TV channels
(broadcasters) might have the same channel number.
While installing, the TV shows the list with channel
number conflicts. You need to select which TV
channel you want to install on a channel number with
multiple TV channels.
To an already installed TV
1. Verify the country setting of the TV. (To verify this
setting, press  and select Setup and press OK.
Select Search for channels > Reinstall channels and
press OK. Press  and later Cancel to leave the
Search for channels.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. To start the reinstallation, press  and
select Setup and press OK. Select TV settings >
General settings > Re-install TV > OK. Select the
correct country and skip the Search for channels.
Finish the installation. When done, continue with step
2.
2. Plug in the USB memory device that holds the
channel list of the other TV.
3. To start the channel list upload, press  and
select Setup and press OK.
4. Select TV settings > General settings > Copy
channel list > Copy to TV and press OK. You might
be asked to enter the Child lock code of this TV.
5. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB memory device.
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVBC input, you can set up your TV for both DVB-T and
DVB-C. Install one system followed by the other with
the necessary settings.
Once each system is installed, you need to switch the
antenna input signal on the Antenna connection on
the back of the TV and set the TV in the appropriate
system to view the installed channels on TV.
To select the DVB-T or DVB-C setting, see above.
DVB settings
Access DVB settings
1. Press  and select Setup and press OK.
2. Select Search for channels and press OK.
3. Select Re-install Channels.
4. Select the country where you install this TV.
5. Select Cable (DVB-C).
6. Select Start to search channels, or select Settings
for DVB-C settings.
7. Press , repeatedly if necessary, to close the
menu.
DVB-T or DVB-C
DVB-T or DVB-C reception
If both DVB-T and DVB-C reception is available in
your country and if this TV is ready to receive DVB-T
and DVB-C for your country, you have selected one
or the other during the channel installation.
Symbol rate mode
If you want to change the DVB setting to start a new
channel installation . . .
If your cable provider did not give you a specific
symbol rate value to install the TV channels, leave the
Symbol rate mode setting on Automatic.
1. Press  and select Setup and press OK.
2. Select Channel settings and press OK.
3. Select Channel installation > Antenna connection >
Antenna (DVB-T) or Cable (DVB-C) and press OK.
4. Select the DVB setting you want.
5. Press , repeatedly if necessary, to close the
menu.
If you received a specific symbol rate value, select
Manual. However, the value you received could be in
the predefined list of symbol rates already. Select
Predefined symbol rates to check if your value is
available automatically.
DVB-C channel installation
Symbol rate
For ease of use, all DVB-C settings are set to
automatic.
If your DVB-C provider gave you specific DVB-C
values, the network ID or network frequency, enter
these values when the TV asks for them during
installation.
With the Symbol rate mode set to Manual, you can
enter the symbol rate value you received from your
cable provider. To enter the value, use the number
keys.
22
To set up the TV system, select System and press OK.
Select your country or the part of the world where
you are now.
- Search channel
To find a channel, select Search channel and press
OK. Select Search and press OK. You can also enter a
frequency yourself. If the reception is poor, press
Search again. If you want to store the channel, select
Done and press OK.
- Fine tune
To fine tune a channel, select Fine tune and press OK.
You can fine tune the channel with  or .
If you want to store the channel found, select Done
and press OK.
- Store
You can store the channel on the current channel
number or as a new channel number.
Select Store current channel or Store as new channel.
Network frequency
With Frequency scan set to Quick or Advanced, you
can enter here the network frequency value received
from your cable provider. To enter the value, use the
number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster Quick scan method and use the
predefined settings used by most cable providers in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full scan method. This method will take
more time to search for and install channels.
You can redo these steps until you found all available
analogue TV channels.
Network ID
With Frequency scan set to Quick, you can enter
here the network ID value received from your cable
provider. To enter the value, use the number keys.
Digital channels
If you know your cable provider is not offering digital
channels, you can skip searching for digital
channels. Select Off.
Analogue channels
If you know your cable provider is not offering
analogue channels, you can skip searching for
analogue channels. Select Off.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free channels
only.
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually . . .
1. Press  and select Setup and press OK.
2. Select Channel settings > Channel installation >
Analogue : manual installation and press OK.
- System
23
7
Change day
TV guide
The TV guide can show scheduled programmes for
the upcoming days (maximum up to 8 days).
7.1
If the TV guide information comes from the
broadcaster, you can press  + to view the schedule
of one of the next days. Press   to go back to the
previous day.
Alternatively, you can press  OPTIONS and select
Change day.
Select Previous day, Today or Next day and press
OK, to select the day of the schedule.
Using the TV guide
What you need
With the TV guide you can view a list of the current
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
guide information.
The TV can collect TV guide information for the
channels that are installed on the TV (e.g the
channels you watch with Watch TV). The TV cannot
collect the TV guide information for channels viewed
from a digital receiver.
Search by genre
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
etc.
To search for programmes by genre, press 
OPTIONS and select Search by genre.
Select a genre and press OK. A list with the found
programmes appears.
Open the TV guide
To open the TV guide, press  TV GUIDE .
Press  TV GUIDE again to close.
7.2
The first time you open the TV guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV guide data is stored in the
TV.
Recordings
From the TV guide, you can instantly record or
schedule a recording of a TV programme. To store the
recordings, connect a USB Hard Drive to the TV.
Tune to a programme
Switch to a programme
7.3
From the TV guide, you can switch to a current
programme.
To select a programme, use the arrow keys to
highlight the programme name.
Navigate to the right to view programmes scheduled
later that day.
To switch to the programme (channel), select the
programme and press OK.
Receiving TV guide data
In some regions and for some channels, TV guide
information might not be available. The TV can collect
TV guide information for the channels that are
installed on the TV (e.g. the channels you watch with
Watch TV). The TV cannot collect the TV guide
information from channels viewed from a digital
receiver or decoder.
View programme details
To call up the details of the selected programme,
press  INFO .
The TV comes with the information set to From the
broadcaster.
Set the TV guide information
To set the TV guide information . . .
1. Press  and select TV guide.
2. Press  key.
3. Select From the broadcaster.
4. Press , repeatedly if necessary, to close the
menu.
24
25
8
8.3
Sources
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
to communicate with the connected devices. Devices
must support HDMI CEC and must be connected with
an HDMI connection.
8.1
Sources list
In the list of connections - the
Source menu - you can find
the devices connected to the
TV.From this Source menu,
you can switch to a device.
Sources menu
To open the Sources menu, press  SOURCES .
To switch to a connected device, select the device
with the arrows  (left) or  (right) and press OK.
To close the Source menu without switching to a
device, press  SOURCES again.
8.2
From standby
With the TV in standby, you can switch on a
connected device with your TV remote control.
Play
To switch on both disc player and TV from standby
and start playing the disc or programme immediately,
press  (play) on the TV remote control.
The device should be connected with an HDMI cable
and both TV and device must have HDMI CEC
switched on.
Home Theatre System
You can switch on your Home Theatre System to
listen to an audio disc or a radio channel and leave
the TV in standby.
To only switch on the HTS, with the TV in standby,
press  SOURCES on the TV remote control.
26
off and set the slider bar to 0 (Off).
3. Press , repeatedly if necessary, to close the
menu.
9
Timers and clock
9.1
Sleep timer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Sleep timer.
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press , repeatedly if necessary, to close the
menu.
9.2
Clock
To know what time it is, press  TV GUIDE to find
the time in the TV guide.
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
To correct the TV clock . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings >
Clock > Auto clock mode and select Country
dependent.
3. Select Daylight saving and select the appropriate
setting.
9.3
Auto switch off
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no input signal
nor remote control commands for 10 minutes, the TV
switches off automatically to save energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, you should deactivate
the automatic switch off.
To deactivate the Auto switch off . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Auto switch
27
- Repeat, Play once
View the pictures repeatedly or once only.
10
Your photos, videos
and music
- Shuffle off, Shuffle on
View the pictures in sequential order, or at random.
- Rotate image
Rotate photo.
10.1
From a USB connection
- Show info
Display the picture name, date, size and next picture
in the slide show.
What you need
To close Browse USB, press  and select another
activity.
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard
Drive.
From a USB device
Play music
With the TV switched on, plug in a USB flash drive or
USB Hard Drive to one of the USB connections. The
TV detects the device and lists your files.
If the list does not appear automatically, press 
SOURCES , select Browse USB and press OK.
In the USB browser, select Music and press
OK.
Options
Press  OPTIONS .
- Stop playback
Stop music play.
- Repeat, Play once
Play songs repeatedly or once.
Menu bar
With a USB device connected, the TV sorts the files by
type. Navigate to the menu bar and select the type of
file you are looking for.
If you browse files from a computer, you can only
browse the files and folders as they are organized on
the computer.
- Shuffle on, Shuffle off
Play songs in sequence or at random.
- Show info
Display the file name.
The menu bar
To close Browse USB, press  and select another
activity.
Navigate to the menu bar and select the type of file
you want to watch or play.
Select Picture, Music or Movie. Alternatively, you can
open the Folders view and browse your folders to
look for a file.
Play videos
In the USB browser, select Movie and press OK.
Options
View photos
Press  OPTIONS .
In the USB browser, select Picture and press OK.
- Subtitles
Display the subtitles if available.
Options
- Audio language
Play the audio language if available.
Press  OPTIONS .
- Start slideshow, Stop slideshow
Start or stop slideshow.
- Repeat, Play once
Play videos repeatedly or once.
- Slideshow transitions
Set the transition from one picture to the next.
- Shuffle on, Shuffle off
Play videos in sequence or at random.
- Slideshow frequency
Select the display time for each photo.
- Show info
Display the file name.
28
To close Browse USB, press  and select another
activity.
29
11
Pause TV
11.1
Pause TV
You can pause a TV broadcast and resume watching
it later. Only digital TV channels can be paused. You
must connect a USB Hard Drive to buffer the
broadcast. You can pause a broadcast for a maximum
time span of 90 minutes.
Pause or resume a broadcast
To pause a broadcast, press  (Pause). A progress
bar appears briefly on screen.
To call up the progress bar, press  (Pause) again.
To resume watching, press  (Play). The icon on
screen indicates you are watching a paused
broadcast.
Back to the actual TV broadcast
To switch back to the actual TV broadcast,
press  (Stop).
The moment you switch to a digital channel, the USB
Hard Drive starts buffering the broadcast. When you
switch to another digital channel, the broadcast of the
new channel is buffered and the broadcast of the
former channel is cleared. When you switch to a
connected device (a Blu-ray Disc player or digital
receiver) the USB Hard Drive stops buffering and the
broadcast is cleared. Also when you switch the TV to
standby the broadcast is cleared.
Whilst recording a programme on the USB Hard Drive,
you cannot pause a broadcast.
Instant replay
Whilst watching a broadcast from a digital TV
channel, you can easily instant replay the broadcast.
To replay the last 10 seconds of a broadcast,
press  (Pause) and press  (Left).
You can press  repeatedly until you reach the start
of the broadcast buffer or the maximum time span.
Progress bar
With the progress bar on screen, press  (Rewind)
or press  (Forward) to select from where you want
to start viewing the paused broadcast. Press these
keys repeatedly to change speed.
30
USB Hard Drive switched on.
12
Recording
List of recordings
12.1
What you need
To view the list of recordings and scheduled
recordings, press , select  Recordings and press
OK.
To record a TV programme you need . . .
- a connected USB Hard Drive formatted on this TV
- digital TV channels installed on this TV (the
channels you watch with Watch TV)
- to receive channel information for the built-in TV
guide
In this list, you can select a recording to watch,
remove recorded programmes, adjust the end time of
an ongoing recording or check the free disc space.
Remove a scheduled recording from TV Guide or the
list of recordings
- Press  List to open the list, then press .
- In TV Guide, select a scheduled recording
programme, then press  Cancel recording.
12.2
Record a programme
Record now
To record the programme you are watching, press 
(Record) on the remote control.
Specifics
If you receive TV guide information from the
broadcaster, the recording starts immediately. You
can adjust the end time of the recording in the list of
recordings.
To stop recording, press  (Stop).
- While recording a programme, you can watch a
previously recorded programme.
- While recording, you cannot switch TV channels.
- While recording, you cannot pause the TV
broadcast.
- To Record, broadcasters need a reliable clock
setting. If you reset the TV clock manually, recordings
may fail.
Schedule a recording
You can schedule a recording of an upcoming
programme for today or a few days from today
(maximum of 8 days away).
12.3
Watch a recording
1. To schedule a recording, press  TV Guide .
On the TV guide page, select the channel and
programme you wish to record.
You can enter the channel number to jump to the
channel in the list.
Press  (Right) or  (Left) to scroll through the
programmes of a channel.
To change the date of the list, press  OPTIONS
and select Change day . In the list, select the day you
want and press OK.
To watch a recording . . .
1. Press , select  Recordings and press OK.
2. In the list, select the recording and press  (Play)
to start the playback. You can use the  (Forward),
 (Rewind),  (Pause) or  (Stop) keys on the
remote control.
Failed recording
When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
recording is marked as Failed.
2. With the programme highlighted, press  Record .
The TV adds some time buffer at the end of the
programme. You can add some extra buffer if
needed.
If you plan to record a
programme in your absence,
remember to leave the TV
switched to standby and the
31
13
Picture settings
Settings
Backlight contrast
13.1
With Backlight contrast, you can adjust the
brightness of the display backlight.
Picture
To adjust the level . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Backlight
contrast.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
Picture style
For easy picture adjustment, you can select a preset
setting with Picture style.
1. While watching a TV channel, press  OPTIONS to
open the Options menu.
2. Select Picture and sound in the menu bar and
select Picture style.
3. Select a style and press OK.
Colour
The available Picture styles are . . .
- Personal - Your preferences made in Quick picture
settings
- Vivid - Ideal for daylight viewing
- Natural - Natural picture settings
- Movie - Ideal for watching movies
- Energy saving - Energy-efficient settings
- Standard - Factory standard settings
- Photo - Ideal for viewing photos
With Colour, you can adjust the colour saturation of
the picture.
To adjust the colour . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Colour.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
Adjust a Picture style
You can adjust a Picture style . . .
1. Select the style and press OK.
2. Press  and select Setup and press OK.
3. Select TV settings, navigate to the individual setting
and adjust it.
4. Press , repeatedly if necessary, to close the
menu.
Sharpness
With Sharpness, you can adjust the level of
sharpness in fine detail of the picture.
To adjust the sharpness . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Sharpness.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
To return to the original Picture style values . . .
1. Press  and sel ect Setup and press OK.
2. Select TV settings > Picture > Picture style and
select the style you want to reset.
3. Select Restore style and press OK. The style is
reset.
Vivid
Noise reduction
If the Picture style is switched back to Vivid every time
you switch on the TV, the TV location is set to Shop. A
setting meant for in-store promotion.
To set the TV for Home use . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Location
and press OK.
3. Select Home and press OK.
4. Press , repeatedly if necessary, to close the
menu.
With Noise reduction, you can select the amount of
noise reduction for the picture.
To set the noise reduction . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Noise reduction.
3. Press  (right) and select Off, Minimum,
Medium or Maximum.
4. Press , repeatedly if necessary, to close the
menu.
32
MPEG artefact reduction
Tint
With MPEG artefact reduction , you can smoothen
the digital transitions in the picture. MPEG artefacts
are mostly visible as small blocks or jagged edges in
images.
With Tint, you can change the colour balance.
To select a preset . . .
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Tint.
3. Press  (right) and
select Normal, Warm or Cool. Select Custom if
you want to set a colour temperature yourself.
4. Press , repeatedly if necessary, to close the
menu.
To reduce the MPEG artefact . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > MPEG
artefact reduction .
3. Press  (right) and select On or Off.
4. Press , repeatedly if necessary, to close the
menu.
Custom tint
Digital Crystal Clear
With Custom tint, you can set a colour temperature
yourself. To set a Custom tint, first select Custom in
the Tint setting to make the Custom tint menu
available. Custom tint is a setting intended for expert
users.
With Digital Crystal Clear, you can fine-tune each
pixel to match the surrounding pixels and produce a
brilliant, high-definition image.
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Digital Crystal
Clear.
3. Press  (right) and select the settings.
4. Press , repeatedly if necessary, to close the
menu.
To set a custom colour temperature . . .
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Custom tint.
3. Press  (right).
4. Select a setting with the arrow keys. (WP is white
point and BL is black level.)
5. Press OK to confirm a setting. You can also select
one of the presets in this menu.
6. Press , repeatedly if necessary, to close the
menu.
The different settings are . . .
- Advanced sharpness - Enable superior sharpness,
especially on lines and contours in the picture.
- Dynamic contrast - Dynamically enhance the
details in the dark, medium and light areas of the
picture.
- Dynamic backlight - Select a backlight level to
optimise dynamic power consumption and picture
contrast.
- Colour enhancement - Dynamically enhance the
vividness and details of colours.
Video contrast
With Video contrast, you can decrease the range of
the video contrast.
To adjust the level . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Advanced > Video
contrast.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
Advanced picture settings
Gamma
With Gamma, you can adjust the non-linear setting
for picture luminance and contrast.
To adjust the level . . .
1. Press  and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Gamma.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
Brightness
With Brightness, you can set the level of brightness
of the picture signal. Brightness is a setting intended
for expert users. We recommend non-expert users to
adjust the brightness with the Backlight
contrast setting.
To adjust the level . . .
1. Press  and select
2. Select TV
33
Setup and press
OK.
settings > Picture > Advanced > Brightness.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
13.4
Sound
Sound style
For easy sound adjustment, you can select a preset
setting with Sound style.
13.2
Game or computer
1. While watching a TV channel, press 
OPTIONS to open the Options menu.
2. Select Picture and sound in the menu bar and
select Sound style.
3. Select a Sound style and press OK.
You can switch the TV to the ideal picture setting for
gaming or for using the TV as a computer monitor.
There is a different setting for Game or Computer. If a
device has a correct type set in the Source menu Game console or Computer - the TV switches
automatically to the ideal setting when you switch to
the device. If you switch the setting manually, do not
forget to switch it off when you switch to watching TV
or another connected device.
The different Sound styles are . . .
- Personal - Your personal choices made in
Personalise picture and sound
- Original - Factory standard
- Movie - Ideal for watching movies
- News - Ideal for speech
- Music - Ideal for listening to music
- Game - Ideal for gaming
To switch the setting manually . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Advanced > Activity
style.
3. Select Game, Computer or TV. The setting TV
returns to the picture settings for watching TV.
4. Press , repeatedly if necessary, to close the
menu.
Adjust a Sound style
You can adjust a Sound style . . .
1. Select the style and press OK.
2. Press  and select Setup and press OK.
3. Select TV settings, navigate to the individual
setting and adjust it.
4. Press  to close the menu to store your setting.
13.3
Format and edges
To return to the original Sound style values . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Restore style.
Picture format
If black bars appear on top and bottom or on both
sides of the picture, you can adjust the picture format
to a format that fills the screen.
Sound settings
To change the picture format . . .
1. While watching a TV channel, press  to open
the Picture format menu.
2. Select a format from the list and press OK.
Bass
With Bass, you can adjust the level of low tones in the
sound.
To adjust the level . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Bass.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
Screen edges
With Screen edges, you can slightly enlarge the
picture to hide distorted edges.
To adjust the edges . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Picture > Format and edges >
Screen edges.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level . . .
34
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Treble.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
speakers.
- If you select On, the TV speakers are always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
- If you select EasyLink, the TV sends the TV sound
to the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
- If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you
can still switch to TV speakers or device speakers in
the Picture and sound menu.
Surround mode
With Surround mode, you can set the sound effect of
the TV speakers.
To set the surround mode . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Surround mode.
3. Press  (right) and select Stereo, Incredible
surround .
4. Press , repeatedly if necessary, to close the
menu.
To set the TV speakers . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Advanced > TV
speakers.
3. Press  (right) and select Off, On, EasyLink or
EasyLink autostart.
4. Press , repeatedly if necessary, to close the
menu.
Headphones volume
To switch speakers directly . . .
With Headphones volume, you can set the volume of
a connected headphones separately.
1. While watching TV, press  OPTIONS and select
Picture and sound.
2. Select Speakers and select TV or Amplifier (audio
device).
3. Press , repeatedly if necessary, to close the
menu.
To adjust the volume . . .
1. Press  OPTIONS and select Picture and sound
in the menu bar.
2. Press  (right) and select Headphones volume
and press OK.
3. Press  (up) or  (down) to adjust the volume.
4. Press , repeatedly if necessary, to close the
menu.
Clear sound
With Clear sound, you improve the sound for speech.
Ideal for news programmes. You can switch the
speech improvement on or off.
Advanced sound settings
To switch on or off . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Advanced > Clear
sound.
3. Press  (right) and select On or Off.
4. Press , repeatedly if necessary, to close the
menu.
Auto volume levelling
With Auto volume leveling, you can set the TV to
automatically level out sudden volume differences.
Typically at the beginning of adverts or when you are
switching channels.
To switch on or off . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Advanced > Auto
volume leveling.
3. Press  (right) and select On or Off.
4. Press , repeatedly if necessary, to close the
menu.
HDMI1-ARC
If you do not need an Audio Return Channel (ARC) on
any of the HDMI connections, you can switch the ARC
signal off.
TV speakers
Audio Out format
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
With TV speakers, you select where you want to hear
the TV sound and how you want to control it.
- If you select Off, you permanently switch off the TV
With Audio Out format you can set the audio out
signal of the TV to fit the sound processing
capabilities of your Home Theatre System.
35
Audio Out levelling
TV placement
With Audio Out leveling you can level the sound
volume of the Home Theatre System with the volume
of the TV when you switch over from one to another.
As part of the first installation, this setting is set to
either On a TV stand or Wall mounted.If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > TV
placement and press OK.
3. Select On a TV stand or Wall mounted and press
OK.
4. Press , repeatedly if necessary, to close the
menu.
Audio Out delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the picture,
you must switch off Audio Out delay on the TV.
Audio Out offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with Audio Out
offset.
13.5
Speakers
Ambilight style
Home Theatre System
Ambilight can have a dynamic mode or a static mode.
With Dynamic mode, the TV follows the colours of the
image on screen.
With Static, Ambilight has a constant static colour.
You can create an Ambilight static colour yourself.
Ambilight (For 6300 TV
models)
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
- If you select Off, you permanently switch off the TV
speakers.
- If you select TV speakers, the TV speakers are
always on.
To select an Ambilight mode . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Ambilight > Ambilight mode.
3. Select Dynamic or Static.
4. Press , repeatedly if necessary, to close the
menu.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
- If you select EasyLink, the TV sends the TV sound
to the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
- If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you can
still switch to TV speakers if necessary.
To select a static colour . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Ambilight > Ambilight
mode > Static and press OK.
3. Select the colour from the colour palette.
Press OK to confirm.
4. Press , repeatedly if necessary, to close the
menu.
To set the TV speakers . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Sound > Sound output.
3. Press  (right) and select Off, TV speakers,
EasyLink or EasyLink autostart.
4. Press , repeatedly if necessary, to close the
menu.
Ambilight brightness
With Ambilight Brightness, you can set the level of
brightness of the Ambilight.
To adjust the level . . .
To switch to speakers directly . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Ambilight > Brightness.
3. Press OK and adjust the value with  (up) or 
(down).
4. Press , repeatedly if necessary, to close the
menu.
1. While watching TV, press  .
2. Select Speakers and select TV or Amplifier (audio
system).
3. Press , repeatedly if necessary, to close the
menu.
36
2 - Select TV settings > Ambilight > Advanced > TV
switch off.
3 - Select Fade out to off or Immediate switch off.
4 - Press , repeatedly if necessary, to close the
menu.
Ambilight saturation
With Ambilight Saturation, you can set the level of
saturation of the Ambilight.
To adjust the level . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Ambilight > Saturation.
3. Press OK and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
Dynamic speed
With Dynamic, you can set the speed at which
Ambilight responds to the images on screen. Adjust
the speed between Relaxed or Dynamic. The
Ambilight mode must be set to Dynamic before you
can adjust Dynamic speed.
To adjust the speed . . .
1. Press  and select Setup and press OK.
2. Select TV settings > Ambilight > Dynamic.
3. Press  (right) and adjust the value with  (up)
or  (down).
4. Press , repeatedly if necessary, to close the
menu.
Advanced Ambilight settings
Wall colour
With Wall colour, you can neutralise the influence of a
coloured wall on the Ambilight colours. Select the
colour of the wall behind the TV and the TV will
modify the Ambilight colours to appear as they are
intended.
To select the colour of the wall . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Ambilight > Advanced > Wall
colour.
3 - Select the colour sample that matches the colour
of the wall behind the TV and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
TV switch off
With TV switch off, you can set Ambilight to switch off
immediately or slowly fade out when you switch off
the TV. The slow fade out gives you some time to
switch on the lights in your living room.
To select the TV switch off . . .
1 - Press  and select Setup and press
OK.
37
14
European energy label
Specifications
The European Energy Label informs you on the
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the
lower the energy it consumes.
On the label, you can find the energy efficiency class,
the average power consumption of this product in use
and the average energy consumption for 1 year. You
can also find the power consumption values for this
product on the Philips website for your country at
www.philips.com/TV
14.1
Environmental
Saving energy
The Eco settings bundle the settings that help the
environment.
While you are watching TV channels, press  to
open Eco settings.
Active settings are marked with a . You can mark or
unmark each setting with the OK key.
Press  again to close Eco settings .
End of use
Disposal of your old product and batteries
Energy saving
This Picture style sets the picture, in the most ideal
energy conscious setting.
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
Select Screen off and press OK. To switch the
screen back on, press any key on the remote control.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2002/96/EC.
Auto switch off
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no signal for 10
minutes, the TV switches off automatically to save
energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, deactivate the
automatic switch off.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Inactive devices off
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. Correct disposal of your old
product helps to prevent potential negative
consequences for the environment and human
health.
Switch off connected EasyLink HDMI-CEC (Consumer
Electronic Control) compliant devices that are
inactive.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
In addition to the Eco settings, your TV also has
environmentally friendly technology with regard to
power consumption.
Power management
The advanced power management of this TV ensures
the most efficient use of energy. You can check how
your personal TV settings, the level of brightness in
current onscreen pictures, and the surrounding light
conditions determine the relative power
consumption.
To check the relative power consumption . . .
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
for the environment and human health.
1. Press  and select Setup and press OK.
2. Select Watch demos > Active control Demo and
press OK.
3. Select a setting to check the corresponding values.
38
1024 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1920 x 1080 - 60 Hz*
14.2
Reception for PxH / PxT
models
Video formats (Resolution - refresh rate)
480i - 60 Hz
480p - 60 Hz
576i - 50 Hz
576p - 50 Hz
720p - 50Hz, 60 Hz
1080i - 50Hz, 60 Hz
1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz
- Aerial input : 75 ohm coaxial (IEC75)
- Tuner bands : Hyperband; S-Channel; UHF; VHF
- DVB : DVB-T (terrestrial, antenna) COFDM 2K/8K;
DVB-T2 : only for TV types '. . . T/12'; DVB-C (cable)
QAM
- Analogue video playback : NTSC; SECAM; PAL
- Digital video playback : MPEG2 SD/HD (ISO/IEC
13818-2); MPEG4 SD/HD (ISO/IEC 14496-10)
- Digital audio playback (ISO/IEC 13818-3)
* For certain sets only.
14.3
14.4
Display
Power
Type
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Diagonal screen size :
- 22Pxx4000 : 51 cm / 20 inch
- 24Pxx4000 : 56 cm / 22 inch
- 24Pxx5210 : 56 cm / 22 inch
Power
- Mains power : AC 220-240V +/-10%
- Ambient temperature : 5°C to 35°C
- Standby power consumption : less than 0.3W
- Power saving features : Eco mode, Picture mute
(for radio), Auto switch off , Eco settings menu.
- 32Pxx4100 : 81 cm / 32 inch
- 40Pxx4100 : 102 cm / 40 inch
- 48Pxx4100 : 122 cm / 48 inch
- 32Pxx4200 : 81 cm / 32 inch
- 40Pxx4200 : 102 cm / 40 inch
The power rating stated on the product typeplate is
the power consumption for this product during
normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
used for electrical safety (IEC 60065 Ed. 7.2).
- 40Pxx6300 : 102 cm / 40 inch
- 48Pxx6300 : 122 cm / 48 inch
- 55Pxx6300 : 140 cm / 55 inch
Display resolution :
- PFxxxxx : 1920x1080p
- PHxxxxx : 1366x768p
14.5
Dimensions and weights
22Pxx4000
- without TV stand:
Width 445.1 mm - Height 269.7 mm - Depth 45.7 mm
- Weight ± 2.67 kg
Display resolutions
Computer formats - HDMI (Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 X 720 - 60 Hz
1280 X 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1680 x 1050 - 60 Hz*
1920 x 1080 - 60 Hz*
- with TV stand:
Width 445.1 mm - Height 279.3 mm - Depth 112 mm Weight ± 2.7 kg
24Pxx4000
- without TV stand:
Width 559 mm - Height 335.8 mm - Depth 54.1 mm Weight ± 3.2 kg
- with TV stand:
Width 559 mm - Height 344 mm - Depth 112 mm Weight ± 3.23 kg
Computer formats - VGA (Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
24Pxx5210
39
- without TV stand:
Width 548.7 mm - Height 323.1 mm - Depth 37.1 mm Weight ± 3.1 kg
55Pxx6300
- without TV stand:
Width 1235 mm - Height 710.6 mm - Depth 48 mm Weight ± 17 kg
- with TV stand:
Width 548.7 mm - Height 336 mm - Depth 99.8 mm Weight ± 3.15 kg
- with TV stand:
Width 1235 mm - Height 776.7 mm - Depth 279 mm Weight ± 20.5 kg
32PFx4100, 32PHx4100/12, 32PHx4100/88, 32Pxx
4200
40Pxx630
- without TV stand:
Width 726.5 mm - Height 425.4 mm - Depth 76.8 mm
- Weight ± 4.82 kg
- without TV stand:
Width 911 mm - Height 528.3 mm - Depth 47.7 mm Weight ± 9.26 kg
- with TV stand:
Width 726.5 mm - Height 464.4 mm - Depth 181 mm
- Weight ± 5.06 kg
- with TV stand:
Width 911 mm - Height 591.6 mm - Depth 241.5 mm
- Weight ± 12 kg
32PHT4100/60
48Pxx630
- without TV stand:
Width 732.5 mm - Height 428.1 mm - Depth 76.8 mm Weight ± 5.2 kg
- without TV stand:
Width 1079.4 mm - Height 623.1mm - Depth 48.3 mm
- Weight ± 12.3 kg
- with TV stand:
Width 732.5 mm - Height 461.9 mm - Depth 180.9 mm
- Weight ± 5.5 kg
- with TV stand:
Width 1079.4 mm - Height 686.2 mm - Depth 263.6
mm - Weight ± 16 kg
40Pxx4100, 40Pxx4200
55Pxx630
- without TV stand:
Width 918 mm - Height 531.5 mm - Depth 76.8 mm Weight ± 8.3 kg
- without TV stand:
Width 1235 mm - Height 710.6 mm - Depth 48 mm Weight ± 17 kg
- with TV stand:
Width 918 mm - Height 570.4 mm - Depth 255.9 mm Weight ± 8.87 kg
- with TV stand:
Width 1235 mm - Height 776.7 mm - Depth 279 mm Weight ± 20.5 kg
48Pxx4100
- without TV stand:
Width 1081.8 mm - Height 623.4 mm - Depth 77.8 mm
- Weight ± 12.2 kg
14.6
Connectivity for Pxx4100,
Pxx4200
- with TV stand:
Width 1081.8 mm - Height 662.7 mm - Depth 255.96
mm - Weight ± 12.8 kg
For PxK4100, PxK4200
40Pxx6300
TV Rear
- without TV stand:
Width 911 mm - Height 528.3 mm - Depth 47.7 mm Weight ± 9.26 kg
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- SERV. U: Service port
- SCART (RGB/CVBS): SCART adaptor
- AUDIO IN (DVI/VGA): Stereo 3.5mm mini-jack
- DIGITAL AUDIO OUT: SPDIF
- TV ANTENNA: 75 ohm coaxial (IEC)
- Satellite
- with TV stand:
Width 911 mm - Height 591.6 mm - Depth 241.5 mm
- Weight ± 12 kg
48Pxx6300
- without TV stand:
Width 1079.4 mm - Height 623.1mm - Depth 48.3 mm
- Weight ± 12.3 kg
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
- with TV stand:
Width 1079.4 mm - Height 686.2 mm - Depth 263.6
mm - Weight ± 16 kg
For PxH4100/PxT4100, PxH4200/PxT4200
40
TV Rear
- HDMI 1 ARC: HDMI Audio Return Channel
- HDMI 2
- SERV. U: Service port
- SCART (RGB/CVBS): SCART adaptor
- AUDIO IN (DVI/VGA): Stereo 3.5mm mini-jack
- DIGITAL AUDIO OUT: SPDIF
- TV ANTENNA: 75 ohm coaxial (IEC)
TV Side
- CI: Common Interface
- USB
- Headphones: Stereo 3.5mm mini-jack
14.7
Sound
- Mono / Stereo
- Sound enhancement : Incredible Surround, Clear
Sound
- Output power:
Pxx4000: 6W (RMS @ 10% THD)
Pxx5210: 10W (RMS @ 10% THD)
Pxx4100/60: 10W (RMS @ 10% THD)
Pxx4100/12: 16W (RMS @ 10% THD)
Pxx4100/88: 16W (RMS @ 10% THD)
Pxx4200: 16W (RMS @ 10% THD)
Pxx6300: 20W (RMS @ 15% THD)
14.8
Multimedia
Note: Multimedia file names must not exceed 128
characters.
Supported multimedia connections
- USB 2.0 (FAT / FAT 32 / NTFS): only connect USB
devices that consume 500 mA of power or less.
Supported image files
- JPEG: *.jpg, *.jpeg
- PNG: *.png.jpg
Supported audio files
- MPEG1: *.mp3
Supported video files
- *.avi, *.mp4, *.mov, *.mkv, *.mpg, *.mpeg
Supported subtitle format
- SRT: multiple language support
41
15
15.2
Software
Software version
To view the current TV software version . . .
15.1
1. Press  and select Setup and press OK.
2. Select Software settings and press OK.
3. Select Current software info and
see Release Version.
4. Press , repeatedly if necessary, to close the
menu.
Software update
Update from USB
It might be necessary to update the TV software. You
need a computer and a USB memory device to
upload the software on the TV. Use a USB memory
device with 256MB free space. Make sure that write
protection is switched off.
1. Start the update on TV
To start the software update . . .
Press , select Setup and press OK.
Select Update software > USB and press
15.3
Open source software
This television contains open source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
offer is requested by the respective licences.
OK.
2. Identify the TV
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to .
..
Intellectual Property Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
3. Download the TV software
Insert the USB memory into your computer.
On the USB memory device, locate the
file update.htm and double click it.
Click on Send ID.
If new software is available, download the .zip file.
After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
Do not place this file in a folder.
15.4
Open source license
Open source license
Open source license statement
4. Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then
back on again. Please wait.
Acknowledgements and License Texts for any open
source software used in this product.
This is a document describing the distribution of the
source code used in this product, which fall either
under the GNU General Public License (the GPL), or
the GNU Lesser General Public License (the LGPL), or
any other open source license.
Instructions to obtain source code for this software
can be found in the documentation supplied with this
product.
TP VISION MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE.
Do not . . .
- use the remote control
- remove the USB memory device from the TV
If a power cut occurs during the update, never
remove the USB memory device from the TV. When
the power returns, the update will continue.
TP Vision offers no support for this software. The
preceding does not affect your warranties and
42
statutory rights regarding any product(s) you
purchased. It only applies to this source code made
available to you.
zlib (1.2.7)
A massively spiffy yet delicately unobtrusive
compression library
Source: www.zlib.net
libsqlite3 (3.7.14)
SQLite is a C library that implements an SQL database
engine.
Programs that link with the SQLite library can have
SQL database access without running a separate
RDBMS process.
libdirectfb (1.4.11)
DirectFB is a thin library that provides hardware
graphics acceleration, input device handling and
abstraction, integrated windowing system with
support for translucent windows and multiple display
layers, not only on top of the Linux Framebuffer
Device.
Source: http://linuxappfinder.com/package/libsqlite
3-0
It is a complete hardware abstraction layer with
software fallbacks for every graphics operation that is
not supported by the underlying hardware. DirectFB
adds graphical power to embedded systems and sets
a new standard for graphics under Linux.
libpng
libpng is the official PNG reference library. It supports
almost all PNG features.
Source: www.libpng.org
Source: http://directfb.org/
OpenSSL (1.0.0.d)
libTomMath (0.42.0)
The OpenSSL Project is a collaborative effort to
develop a robust, commercial-grade, full-featured,
and Open Source toolkit implementing the Secure
Sockets Layer (SSL v2/v3) and Transport Layer
Security (TLS v1) protocols as well as a full-strength
general purpose cryptography library. The project is
managed by a worldwide community of volunteers
that use the Internet to communicate, plan, and
develop the OpenSSL toolkit and its related
documentation.
LibTom Projects are open source libraries written in
portable C under WTFPL. The libraries supports a
variety of cryptographic and algebraic primitives
designed to enable developers and students to
pursue the field of cryptography much more
efficiently.
Source: http://libtom.org/
MTD utility (1.5.0)
Source: www.openssl.org
MTD subsystem (stands for Memory Technology
Devices) provides an abstraction layer for raw flash
devices. It makes it possible to use the same API
when working with different flash types and
technologies, e.g. NAND, OneNAND, NOR, AG-AND,
ECC'd NOR, etc.
libboost (1.51)
Boost provides free peer-reviewed portable C++
source libraries, and emphasize libraries that work
well with the C++ Standard Library.
Boost libraries are intended to be widely useful, and
usable across a broad spectrum of applications.
MTD subsystem does not deal with block devices like
MMC, eMMC, SD, CompactFlash, etc. These devices
are not raw flashes but they have a Flash Translation
layer inside, which makes them look like block
devices. These devices are the subject of the Linux
block subsystem, not MTD.
The Boost license encourages both commercial and
non-commercial use.
Source: www.boost.org
Source: http://www.linuxmtd.infradead.org/source.html
libjpeg (6b)
Libjpeg is a widely used C library for reading and
writing JPEG image files.
Source: http://libjpeg.sourceforge.net/
43
libscew
The aim of SCEW is to provide an easy interface
around the XML Expat parser, as well as a simple
interface for creating new XML documents. It provides
functions to load and access XML elements without
the need to create Expat event handling routines
every time you want to load a new XML document.
SCEW is freely available for download under the
terms of the GNU Lesser General Public License v2.1
(LGPL).
Source: http://www.nongnu.org/scew/
libexpat
Expat is an XML parser library written in C.
It is a stream-oriented parser in which an application
registers handlers for things the parser might find in
the XML document (like start tags).
Source: http://expat.sourceforge.net/
libdrm
libdrm provides core library routines for the X Window
System to directly interface with video hardware
using the Linux kernel's Direct Rendering Manager
(DRM).
Source: http://dri.freedesktop.org/libdrm/
FFMpeg (0.6)
A complete, cross-platform solution to record,
convert and stream audio and video.
Source: www.ffmpeg.org
44
16
Philips startup screen
Troubleshooting
and support
When the TV is in standby, a Philips startup screen is
displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
and reconnected to the power supply, the startup
screen is displayed at the next startup. To switch on
the TV from standby, press on the remote control or
the TV.
16.1
Troubleshooting
The standby light keeps on blinking
Disconnect the power cable from the power outlet.
Wait 5 minutes before you reconnect the power
cable. If the blinking reoccurs, contact Philips TV
Consumer Care.
Channels
No digital channels found during the installation
See the technical specifications to make sure that
your TV supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected and
that the correct network is selected.
Wrong menu language
Change the language back to your language.
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Menu
language and press OK.
3. Select the language you want and press OK.
4. Press , repeatedly if necessary, to close the
menu.
Previously installed channels are not in the channel
list
Make sure that the correct channel list is selected.
General
Picture
The TV does not switch on
- Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
- Make sure that the power cable is securely
connected.
No picture / distorted picture
- Make sure that the antenna is properly connected
to the TV.
- Make sure that the correct device is selected as the
display source.
- Make sure that the external device or source is
properly connected.
Creaking sound at startup or switch off
When you are turning the TV on, off or to standby,
you hear a creaking sound from the TV chassis. The
creaking sound is due to the normal expansion and
contraction of the TV as it cools and warms up. This
does not affect performance.
Sound but no picture
- Make sure that the picture settings are set correctly.
TV does not respond to the remote control
Poor antenna reception
The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behaviour.
If the TV continues to be unresponsive to the remote
control, you can check if the remote control is working
by means of a mobile phone camera. Put the phone
in camera mode and point the remote control to the
camera lens. If you press any key on the remote
control and you notice the infra red LED flicker
through the camera, the remote control is working.
The TV needs to be checked.
If you do not notice the flickering, the remote control
might be broken or its batteries are low.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
- Make sure that the antenna is properly connected
to the TV.
- Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality. If possible, try to improve
the reception quality by changing the antenna
direction or moving devices away from the TV.
- If reception on only one channel is poor, fine-tune
this channel.
Poor picture from a device
- Make sure that the device is connected properly.
- Make sure that the picture settings are set correctly.
Picture settings change after a while
Make sure that Location is set to Home . You can
change and save settings in this mode.
The TV goes back to standby after showing the
A commercial banner appears
45
EasyLink does not work
Make sure that Location is set to Home.
- Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
Picture does not fit the screen
Change to a different picture format. Press .
No volume icon shown
Picture format keeps changing with different
- When a HDMI-CEC audio device is connected this
behaviour is normal.
channels
Select a non 'Auto' picture format.
Photos, videos and music from a USB device do not
Picture position is incorrect
show
Picture signals from some devices may not fit the
screen correctly. Check the signal output of the
connected device.
- Make sure that the USB storage device is set to
Mass Storage Class compliant, as described in the
storage device's documentation.
- Make sure that the USB storage device is
compatible with the TV.
- Make sure that the audio and picture file formats
are supported by the TV.
Computer picture is not stable
Make sure that your PC uses the supported resolution
and refresh rate.
Choppy playback of USB files
- The transfer performance of the USB storage
device may limit the data transfer rate to the TV which
causes poor playback.
Sound
No sound or poor sound quality
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
16.2
Register
- Make sure that the sound settings are correctly set.
- Make sure that all cables are properly connected.
- Make sure that the volume is not muted or set to
zero.
- Make sure that the TV audio output is connected to
the audio input on the Home Theatre System.
- Sound should be heard from the HTS speakers.
- Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
Go to www.philips.com/welcome
16.3
Help
This TV offers help on screen.
Connections
Open Help
HDMI
1. Press  to open the Home menu.
2. Select Help and press OK.
- Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
- If the TV does not recognise the HDMI device and
no picture is displayed, switch the source from one
device to another and back again.
- If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
- If you use an HDMI-to-DVI adapter or HDMI-toDVI cable, make sure that an additional audio cable is
connected to AUDIO IN (mini-jack only), if available.
16.4
Online help
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support .
46
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our colaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
16.5
Consumer Care / Repair
For support and repair, call the Consumer Care
hotline in your country. Find the telephone number in
the printed documentation that came with the TV.
Or consult our website www.philips.com/support .
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
 Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irreparable damage to your TV or
void your warranty.
47
17
Risk of injury or damage to the TV
Safety and care
- Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
17.1
- If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
Safety
Important
- When wall mounted, ensure that the wall mount
can safely bear the weight of the TV set. TP Vision
bears no responsibility for improper wall mounting
that results in accident, injury or damage.
Read and understand all safety instructions before
you use the TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
- Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Secure the TV from falling over
Risk of damage to the TV !
Always use the supplied wall bracket to secure the TV
from falling over. Mount the bracket and secure the
TV onto the bracket, even if you put the TV on the
floor.
Before you connect the TV to the power outlet,
ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
to the power outlet if the voltage is different.
You can find the mounting instructions in the Quick
Start Guide that came with the TV. In case you lost
this guide, you can download the guide from
www.philips.com
Use the product type number of the TV to look for the
Quick Start Guide to download.
Risk of injury
Follow these precautions to prevent the TV from
toppling over and causing injury:
- Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
Risk of electric shock or fire
- Ensure that no part of the TV hangs over the edge
of the mounting surface.
- Never expose the TV to rain or water. Never place
liquid containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips TV Consumer Care to have the TV
checked before use.
- Never place the TV on tall furniture, such as a
bookcase, without anchoring both the furniture and
TV to the wall or a suitable support.
- Teach children about the dangers of climbing on
furniture to reach the TV.
- Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning
candles, naked flames or other heat sources,
including direct sunlight.
Risk of swallowing batteries !
The remote control may contain coin-type batteries
which can easily be swallowed by small children.
Keep these batteries out of reach of children at all
times.
- Never insert objects into the ventilation slots or
other openings on the TV.
- Never place heavy objects on the power cord.
- Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
exerted on the power cord when you swivel the TV
screen.
Risk of overheating
Never install the TV in a confined space. Always leave
a space of at least 10 cm or 4 inches around the TV
for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
- To disconnect the TV from the mains power, the
power plug of the TV must be disconnected. When
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
48
Lightning storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5
degrees Celsius or 41 degrees Fahrenheit, unpack
the TV and wait until the TV temperature reaches
room temperature before connecting the TV to the
power outlet.
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
17.2
Screen care
- Never touch, push, rub or strike the screen with any
object.
- Unplug the TV before cleaning.
- Clean the TV and frame with a soft damp cloth and
wipe gently. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
- To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
49
property of the display (within common industry
standards) and is not a malfunction. CE compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/EC
(EMC) and 2011/65/EU (ROHS). Compliance with EMF
TP Vision Europe B.V. manufactures and sells many
products targeted at consumers which, like any
electronic apparatus, in general have the ability to
emit and receive electromagnetic signals. One of
Philips’ leading Business Principles is to take all
necessary health and safety measures for our
products, to comply with all applicable legal
requirements and to stay well within the Electro
Magnetic Field (EMF) standards applicable at the
time of producing the products. Philips is committed
to develop, produce and market products that cause
no adverse health effects. TP Vision confirms that, as
long as its products are handled properly for their
intended use, they are safe to use according to
scientific evidence available today. Philips plays an
active role in the development of international EMF
and safety standards, enabling Philips to anticipate
further developments in standardisation for early
integration in its products.
18
Terms of use,
copyrights and
licenses
18.1
Terms of use
2015 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter
referred to as TP Vision, which is the manufacturer of
the product. TP Vision is the warrantor in relation to
the TV with which this booklet was packaged. Philips
and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V
or their respective owners. TP Vision reserves the right
to change products at any time without being obliged
to adjust earlier supplies accordingly.
18.2
The written material packaged with the TV and the
manual stored in the memory of the TV or
downloaded from the Philips website are believed to
be adequate for the intended use of the system.
Copyrights and licenses
HDMI
The material in this manual is believed adequate for
the intended use of the system. If the product, or its
individual modules or procedures, are used for
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision Europe B.V. warrants that the
material itself does not infringe any United States
patents. No further warranty is expressed or implied.
TP Vision Europe B.V. cannot be held responsible
neither for any errors in the content of this document
nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted
and published on the Philips support website as soon
as possible. Terms of warranty Risk of injury, damage
to TV or void of warranty! Never attempt to repair the
TV yourself. Use the TV and accessories only as
intended by the manufacturer. The caution sign
printed on the back of the TV indicates risk of electric
shock. Never remove the TV cover. Always contact
Philips TV Customer Care for service or repairs. Any
operation expressly prohibited in this manual, or any
adjustments and assembly procedures not
recommended or authorised in this manual, shall void
the warranty. Pixel characteristics This LCD/LED
product has a high number of colour pixels. Although
it has effective pixels of 99.999% or more, black dots
or bright points of light (red, green or blue) may
appear constantly on the screen. This is a structural
HDMI®
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Dolby
Dolby®
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
50
MHEG software
The copyright in MHEG software (the Software)
comprised in this television (this product) and
included to enable you to use interactive television
features is owned by S&T CLIENT SYSTEMS LIMITED
(the Owner). You are permitted to use the Software
only in conjunction with this product.
Kensington
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with issued
registrations and pending applications in other
countries throughout the world.
Other trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
51
Index
52
Powered by TCPDF (www.tcpdf.org)
53