STRIPPING TOOLS
No.
Length
mm
inches
Working range / Finish
Weight
Stripping and crimping tool
for easy stripping, crimping and cutting only with one tool, the special scanning system adjusts automatically to the wire diameter
5-532
160
6 1/4''
easy stripping
from 0.5 to 6.0 mm2
stripping length 5 mm
crimping ranges for terminals:
0.5 to 2.5 and 4.0 to 6.0 mm2
cutting capacity of the side cutters
max. 6.0 mm2,
solid conductors max. 4.0 mm2
115 g
Coax cable stripper
for two-or-three-level stripping of all common coaxial cables (e.g. antenna- and
transmission cables) and flexible cables
5-535
110
4 3/8''
coax cable from
4.8 to 7.5 mm outside-Ø
for flexible cable 3 x 0.75 mm2,
10 mm2 and 16 mm2
30 g
Round cable stripper
with ergonomical handles
5-536
125
5''
round and continental type cable
from 8 to 13 mm Ø
e.g. NYM 3 x 1.5 mm2
up to 5 x 2.5 mm2
45 g
Swivel-blade cable strippers
for accurate, fast and safe stripping of all common round cables
of 4 - 28 mm Ø, cutting depth and adjustment via adjusting screw at end of
handle, moving inner blade automatically adjusts itself from circular to longitudinal cuts
5-503
5-504
5-505
5-506
130
130
170
180
5 1/8''
5 1/8''
6 3/4''
7''
without blade:
without blade:
hook blade:
straight blade:
8 - 28 mm Ø
4 - 16 mm Ø
4 - 28 mm Ø
4 - 28 mm Ø
70 g
70 g
80 g
80 g
Automatic wire stripper Super
fully insulated automatic wire stripper for all common stranded and solid conductors of 0.2 - 6.0 mm2, adjustable length stop of 5 - 12 mm,
removable if required
5-531
200
8''
built-in side cutters for max. 2 mm Ø
105 g
15-531 VDE 200
8''
fibreglass re-enforced polyamide,
fully insulated, approved for works
on "hot" lines up to 1000 Volt
105 g
79