Product Highlights
Flexibility and Reliability
A combination of RJ-45, SFP, and SFP+ ports provides
the necessary flexibility to adapt to a wide range of
applications and environments
Security and Authentication Features
Robust security features, including the D-Link
Safeguard Engine™, protect against malicious attacks,
while authentication tools allow access control
High Bandwidth
Up to four 10G SFP+ ports1 provide maximum
throughput, reduce latency, and provide bandwidth
for future network expansion
DGS-1210ME Series
Metro Ethernet Switches
Features
The DGS-1210ME Series Metro Ethernet Switches are a range of switches designed for
Flexible Hardware Design
10/100/1000BASE-T RJ-45 ports, 1G SFP ports, and 10G SFP+ ports for increased network
• Available in multiple configurations:
• Different combinations of 1000BASE-T, 1G,
and 10G ports
• PoE and non-PoE variations
Metro Ethernet applications. They feature a variety of port configurations, including
bandwidth. Surge protection, advanced Layer 2 functions, and a suite of security and
management tools make the DGS-1210ME Series Metro Ethernet Switches ideal for Metro
Ethernet applications.
• Designed for standard 1U rack-mounting
Multi-Gigabit Performance
• Rear panel RPS connector for an additional
external power supply (for non-PoE models)
The DGS-1210ME Series Metro Ethernet Switches come in a variety of port setups, including
Layer 2 Features
• 16K MAC address table
Gigabit Ethernet RJ-45, 1G Ethernet SFP ports, or 10G SFP+ ports. All models offer a minimum
of at least two 1G Ethernet SFP ports, excluding the DGS-1210-12TS/ME which offers ten 1G SFP
ports and two 10/100/1000BASE-T ports. The DGS-1210-28X/ME and DGS-1210-28XS/ME offer
• IEEE 802.1D STP, 802.1w RSTP, and 802.1s MSTP
four 10G SFP+ ports for improved uplink bandwidth. The DGS-1210-10P/ME, DGS-1210-28P/
• Loopback detection
ME, DGS-1210-28MP/ME, DGS-1210-52P/ME, DGS-1210-52MP/ME and DGS-1210-52MPP/ME
• Supports IEEE 802.3ad Link Aggregation
switches feature Power over Ethernet (PoE), allowing compatible devices to be installed and
• Port-based Q-in-Q
powered in remote locations without immediate access to power outlets.
• VLAN Trunking
Security and Authentication
• Port security
• SSH/SSL
• IP-MAC-Port Binding (IMPB)
• Access Control List (ACL) and IEEE 802.1X
• Guest VLAN
Reliability and Maintenance
• Surge protection on all Gigabit Ethernet ports2
• ITU-T G.8032 ERPS sub-50 ms protection and
recovery
• Dying Gasp for quick trouble shooting during
power failures or system shut downs
Efficient and Resilient
For mission critical environments, the DGS-1210ME Series Metro Ethernet Switches support
IEEE 802.1D 2004 edition, 802.1w, and 802.1s Spanning Tree Protocols (STP). The Spanning
Tree Protocol allows the switches to participate in Spanning Tree topology, providing an
alternative Layer 2 path in the event of a network failover. The switches also support IEEE
802.3ad link aggregation, which enables multiple ports to be grouped to form a single virtual
port, increasing bandwidth and redundancy for higher availability. This series furthermore
features IEEE 802.1p Quality of Service (QoS), allowing for real-time traffic classification into
Weighted Round Robin (WRR) and strict priority levels mapped to 8 queues. Advanced traffic
classification parameters allow the network to be tuned for flexible configurations for specific
multimedia applications such as VoIP or IPTV.
DGS-1210ME Series Metro Ethernet Switches
Security & Authentication
Traffic & Bandwidth Control
The DGS-1210ME Series supports IEEE 802.1X port-based/host-based access
Integrated bandwidth control allows network administrators to define the
control, guest VLAN, and RADIUS/TACACS+ authentication for strict access
throughput levels for ingress and egress bandwidth. It provides a minimum
control to the network. The IP-MAC-Port Binding (IMPB) feature allows
granularity of 64 Kbps for ingress port and flow-based bandwidth control,
administrators to associate a source IP address with a designated MAC
and a minimum granularity of 64 Kbps for egress queue bandwidth.
address and also offers the flexibility to define the port number to enhance
The DGS-1210ME Series also supports traffic control, which optimizes
user access control. The built-in D-Link Safeguard Engine™ protects the CPU
performance by dropping packets when exceeding a set threshold, while
from broadcast, multicast, and unicast flooding by automatically trapping
port mirroring helps administrators facilitate traffic diagnostics and track
packets and logging events in these situations. In addition, the Access Control
network performance. The DGS-1210ME Series also provides IGMP snooping
List (ACL) feature enhances network security and switch performance.
with IGMP authentication to prune multicast traffic and to optimize available
Management Capabilities
A user-friendly web interface gives administrators access to advanced
bandwidth.
Multicast Applications
management features such as DHCP auto-configuration. This enables
The DGS-1210ME Series features a full set of L2 multicast functions, including
switches to load their configuration from a TFTP server once they have
IGMP snooping, IGMP filtering, fast leave, and multicast traffic configuration
been assigned an IP address, allowing central management of device
for specific ports. With L2 multicast support, the DGS-1210ME Series is ready
configurations. The switches support Link Layer Discovery Protocol (LLDP),
and capable of handling growing IPTV applications. Host-based IGMP/MLD
which advertises the device’s capabilities and identity to the local network,
snooping allows for multiple multicast subscribers per physical interface, and
allowing administrators to better manage their network topology. Each port
ISM VLAN sends multicast streams in a multicast VLAN, saving bandwidth on
also supports cable diagnostics, which can be used to troubleshoot cable
the backbone. Additionally, ISM VLAN profiles allow users to bind or replace
length and functionality problems remotely, resulting in lower management
the predefined multicast registration information to subscriber ports quickly
overheads.
and easily.
DGS-1210ME Series Metro Ethernet Switches
DGS-1210-10/ME
DGS-1210-10P/ME
DGS-1210-20/ME
DGS-1210-12TS/ME
DGS-1210-28/ME
DGS-1210-28X/ME
DGS-1210-28P/ME
DGS-1210-28XS/ME
DGS-1210-28MP/ME
DGS-1210-52/ME
DGS-1210-52P/ME
DGS-1210-52MPP/ME
DGS-1210-52MP/ME
DGS-1210ME Series Metro Ethernet Switches
Technical Specifications
Model Number
Hardware Version
DGS-1210-10P/ME
DGS-1210-28P/ME
DGS-1210-28MP/ME
B1
B1
B1
Interface
Size
• 11-inch standard rack-mount width
• 1U height
• 19-inch standard rack-mount width
• 1U height
• 19-inch standard rack-mount width
• 1U height
Interfaces
• 8 10/100/1000BASE-T PoE
• 2 1G SFP
• 24 10/100/1000BASE-T PoE
• 4 1G SFP
• 24 10/100/1000BASE-T PoE
• 4 1G SFP
Port Standards & Functions
• Ports 1 to 8 compliant with IEEE 802.3at
• Ports 1 to 24 compliant with IEEE 802.3at
• Ports 1 to 24 compliant with IEEE 802.3at
Console Port
• RJ-45 console port
Other Port Standards &
Functions
• IEEE 802.3i 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3az compliance
• Auto-negotiation
• IEEE 802.3x Flow Control
• IEEE 802.3z 1000BASE-X Gigabit Fiber
Network Cables
• UTP Cat. 5, Cat. 5e (100 m max.)
Full/Half-Duplex
• Full/half-duplex for 10/100 Mbps speeds
• Full-duplex for 1000 Mbps speed
Media Interface Exchange
• Auto MDI/MDIX adjustment for all twisted-pair ports
Performance
Switching Capacity
20 Gbps
Forwarding Method
56 Gbps
Store-and-forward
MAC Address Table Size
16K entries
MAC Address Update
64-byte Max. Forwarding Rate
56 Gbps
Up to 256 static MAC entries
14.88 Mpps
41.7 Mpps
CPU Memory
256 MB DDR3
Packet Buffer
1.5 MB
Flash Memory
32 MB
41.7 Mpps
LEDs
Power (per device)



Console (per device)



Link/Active/Speed (per port)





307,703 hours
331,699 hours
267,960 hours
0 dB(A)
High speed: 52.9 dB(A)
Low speed: 45.3 dB(A)
High Speed: 52.4 dB(A)
Low Speed: 47.9 dB(A)
Fan Error
Physical/Environmental
MTBF
Acoustic
DGS-1210ME Series Metro Ethernet Switches
Heat Dissipation
352.63 BTU/hr
857.98 BTU/hr
Power Input
Maximum Power
Consumption
1552.32 BTU/hr
AC Input: 100 to 240 V AC, 50/60 Hz
103.4 W (PoE on)
17.9 W (PoE off)
251.5 W (PoE on)
28.7 W (PoE off)
445 W (PoE on)
35.6 W (PoE off)
78 W
193 W
370 W
10.3 W/100 V
11.1 W/240 V
18.4 W/100 V
16.1 W/240 V
23.5 W/100 V
21.8 W/240 V
280 x 180 x 44 mm
440 x 210 x 44 mm
440 x 250 x 44 mm
Ventilation
Fanless
2 x Smart fans
3 x Smart fans
Weight
1.92 kg
3.34 kg
3.96 kg
Maximum PoE Budget
Standby Power Consumption
Dimensions (W x D x H)
Power Surge Protection
All Gigabit Ethernet ports support IEC 61000-4-5 surge protection
Operating Temperature
-5 to 50 °C (23 to 122 °F)
Storage Temperature
-40 to 70 °C (-40 to 158 °F)
Operating Humidity
10% to 90% non-condensing
Storage Humidity
5% to 90% non-condensing
EMI
FCC class A, CE class A, VCCI, BSMI, CCC
Safety Certifications
CE, LVD, UL, CB
Technical Specifications
Model Number
Hardware Version
DGS-1210-52P/ME
DGS-1210-52MP/ME
DGS-1210-52MPP/ME
B1
B1
B1
Interface
Size
• 19-inch standard rack-mount width
• 1U height
• 19-inch standard rack-mount width
• 1U height
• 19-inch standard rack-mount width
• 1U height
Interfaces
• 24 10/100/1000BASE-T PoE
• 24 10/100/1000BASE-T
• 4 1G SFP
• 48 10/100/1000BASE-T PoE
• 4 1G SFP
• 48 10/100/1000BASE-T PoE
• 4 1G SFP
Port Standards & Functions
• Ports 1 to 8 compliant with IEEE 802.3at
• Ports 9 to 24 compliant with IEEE 802.3af
Ports 1 to 8 compliant with IEEE 802.3at
Ports 9 to 48 compliant with IEEE 802.3af
Ports 1 to 48 compliant with IEEE 802.3at
Console Port
Other Port Standards &
Functions
• RJ-45 console port
• IEEE 802.3i 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3az compliance
• Auto-negotiation
• IEEE 802.3x Flow Control
• IEEE 802.3z 1000BASE-X Gigabit Fiber
Network Cables
• UTP Cat. 5, Cat. 5e (100 m max.)
Full/Half-Duplex
• Full/half-duplex for 10/100 Mbps speeds
• Full-duplex for 1000 Mbps speed
Media Interface Exchange
• Auto MDI/MDIX adjustment for all twisted-pair ports
DGS-1210ME Series Metro Ethernet Switches
Performance
Switching Capacity
104 Gbps
Forwarding Method
Store-and-forward
MAC Address Table Size
16K entries
MAC Address Update
Up to 256 static MAC entries
64-byte Max. Forwarding Rate
77.4 Mpps
CPU Memory
256 MB DDR3
Packet Buffer
3.0 MB
Flash Memory
32 MB
LEDs
Power (per device)



Console (per device)



Link/Active/Speed (per port)



Fan Error



289,151 hours
272,910 hours
265,457 hours
High speed: 47.3 dB(A)
Low speed: 37.8 dB(A)
High speed: 50.1 dB(A)
Low speed: 40.4 dB(A)
High Speed: 55.2 dB(A)
Low Speed: 49.3 dB(A)
932.23 BTU/hr
1636.16 BTU/hr
3268.46 BTU/hr
Physical/Environmental
MTBF
Acoustic
Heat Dissipation
Power Input
Maximum Power
Consumption
Maximum PoE Budget
Standby Power Consumption
Dimensions (W x D x H)
Ventilation
Weight
AC Input: 100 to 240 V AC, 50/60 Hz
273.2 W (PoE on)
47.9 W (PoE off)
479.5 W (PoE on)
54.4 W (PoE off)
957.9 W (PoE on)
56.8 W (PoE off)
193 W
370 W
740 W
32 W/100 V
30.1 W/240 V
33 W/100 V
31.6 W/240 V
37.8 W/100 V
35.9 W/240 V
440 x 430 x 44 mm
440 x 430 x 44 mm
440 x 431 x 44 mm
2 x Smart fans
3 x Smart fans
5 x Smart fans
5.72 kg
6.04 kg
6.52 kg
Power Surge Protection
All Gigabit Ethernet ports support IEC 61000-4-5 surge protection
Operating Temperature
-5 to 50 °C (23 to 122 °F)
Storage Temperature
-40 to 70 °C (-40 to 158 °F)
Operating Humidity
10% to 90% non-condensing
Storage Humidity
5% to 90% non-condensing
EMI
Safety Certifications
FCC class A, CE class A, VCCI, BSMI, CCC
CE, LVD, UL, CB
DGS-1210ME Series Metro Ethernet Switches
Technical Specifications
Model Number
Hardware Version
DGS-1210-10/ME
DGS-1210-20/ME
DGS-1210-28/ME
DGS-1210-52/ME
B1
B1
B1
B1
Interface
Size
• 11-inch standard
rack-mount width
• 1U height
• 11-inch standard
rack-mount width
• 1U height
• 19-inch standard
rack-mount width
• 1U height
• 19-inch standard
rack-mount width
• 1U height
Interfaces
• 8 10/100/1000BASE-T
• 2 1G SFP
• 16 10/100/1000BASE-T
• 4 1G SFP
• 24 10/100/1000BASE-T
• 4 1G SFP
• 48 10/100/1000BASE-T
• 4 1G SFP
Console Port
RJ-45 console port
Other Port Standards &
Functions
• IEEE 802.3i 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3az compliance
• Auto-negotiation
• IEEE 802.3x Flow Control
• IEEE 802.3z 1000BASE-X Gigabit Fiber
Network Cables
• UTP Cat. 5, Cat. 5e (100 m max.)
Full/Half-Duplex
• Full/half-duplex for 10/100 Mbps speeds
• Full-duplex for 1000 Mbps speed
Media Interface Exchange
• Auto MDI/MDIX adjustment for all twisted-pair ports
Performance
Switching Capacity
64-byte Max. Forwarding Rate
20 Gbps
40 Gbps
56 Gbps
104 Gbps
14.88 Mpps
29.80 Mpps
41.7 Mpps
77.4 Mpps
1.5 MB
3.0 MB
MAC Address Table Size
16K entries
CPU Memory
Packet Buffer
256 MB DDR3
1.5 MB
1.5 MB
Flash Memory
32 MB
LEDs
Power (per device)




Console (per device)




Link/Active/Speed (per port)




Fan Error

Physical/Environmental
MTBF
Acoustic
Heat Dissipation
Power Input
Optional 54 W AC to DC PSU
412,956 hours
349,836 hours
497,918 hours
381,999 hours
0 dB(A)
0 dB(A)
0 dB(A)
High speed: 49 dB(A)
Low speed: 40 dB(A)
46.35 BTU/hr
47.67 BTU/hr
60.12 BTU/hr
132.08 BTU/hr
AC Input: 100 to 240 V AC, 50/60 Hz
• Output: 12.4 V/3.7 A (min 11.78 V & max 13.02 V); 13.6 V/0.6 A (min 13.40 V & max 13.80 V)
• Charging output for lead-acid battery: 13.6 V +/- 1.5%; charge current 0.6 A +/- 0.1 A
DGS-1210ME Series Metro Ethernet Switches
Battery Connection Input
Maximum Power
Consumption
• Rear RPS socket for connecting external lead-acid batteries
• Battery status monitoring through CLI or SNMP
13.38 W/100 V
13.59 W/240 V
13.81 W/100 V
13.97 W/240 V
19.05 W/100 V
19.14 W/240 V
38.85 W/100 V
38.35 W/240 V
9.3 W/100 V
9.4 W/240 V
6.76 W/100 V
6.95 W/240 V
7.87 W/100 V
8.21 W/240 V
21.72 W/100 V
21.49 W/240 V
280 x 126 x 44 mm
280 x 180 x 44 mm
440 x 140 x 44 mm
440 x 210 x 44 mm
Ventilation
Fanless
Fanless
Fanless
1 x Smart fan
Weight
1.05 kg
1.38 kg
2.21 kg
3.31 kg
Standby Power Consumption
Dimensions (W x D x H)
Power Surge Protection
All Gigabit Ethernet ports support IEC 61000-4-5 surge protection
Operating Temperature
-5 to 50 °C (23 to 122 °F)
Storage Temperature
-40 to 70 °C (-40 to 158 °F)
Operating Humidity
10% to 90% non-condensing
Storage Humidity
5% to 90% non-condensing
EMI
FCC class A, CE class A, VCCI, BSMI, CCC
Safety Certifications
CE, LVD, UL, CB
Technical Specifications
Model Number
Hardware Version
DGS-1210-12TS/ME
DGS-1210-28X/ME
DGS-1210-28XS/ME
B1
B1
B1
Interface
Size
• 11-inch standard rack-mount width
• 1U height
• 19-inch standard rack-mount width
• 1U height
• 19-inch standard rack-mount width
• 1U height
Interfaces
• 10 1G SFP
• 2 10/100/1000BASE-T
• 24 10/100/1000BASE-T
• 4 10G SFP+
• 24 100/1000 Mbps SFP
• 4 10G SFP+
Console Port
Other Port Standards &
Functions
RJ-45 console port
• IEEE 802.3i 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
• IEEE 802.3az compliance
• Auto-negotiation
• IEEE 802.3x Flow Control
• IEEE 802.3ae 10 Gigabit Ethernet (for 28X/ME, 28XS/ME)
• IEEE 802.3u 100BASE-FX (for 28XS/ME)
• IEEE 802.3z 1000BASE-X Gigabit Fiber (for 28XS/ME, 12TS/ME)
Network Cables
• UTP Cat. 5, Cat. 5e (100 m max.)
Full/Half-Duplex
• Full/half-duplex for 10/100 Mbps speeds
• Full-duplex for 1000 Mbps speeds
Media Interface Exchange
• Auto MDI/MDIX adjustment for all twisted-pair ports
DGS-1210ME Series Metro Ethernet Switches
Performance
Switching Capacity
64-byte Max. Forwarding Rate
24 Gbps
128 Gbps
128 Gbps
17.86 Mpps
95.24 Mpps
95.24 Mpps
MAC Address Table Size
16K Entries
CPU Memory
256 MB DDR3
Packet Buffer
1.5 MB
Flash Memory
32 MB
LEDs
Power (per device)



Console (per device)



Link/Active/Speed (per port)





405,083 hours
450,021 hours
243,327 hours
0 dB(A)
42.5 dB(A)
48.9 dB(A)
47.25 BTU/hr
83.72 BTU/hr
115.17 BTU/hr
Fan Error
Physical/Environmental
MTBF
Acoustic
Heat Dissipation
Power Input
AC Input: 100 to 240 V AC, 50/60 Hz
Maximum Power
Consumption
13.6 W/100 V
13.85 W/240 V
24.5 W/100 V
24.4 W/240 V
32.9 W/100 V
33.4 W/240 V
Standby Power Consumption
7.28 W/100 V
7.49 W/240 V
12.8 W/100 V
13.0 W/240 V
15.5 W/100 V
16.7 W/240 V
280 x 180 x 44 mm
440 x 210 x 44 mm
440 x 210 x 44 mm
Ventilation
Fanless
1 x Smart fan
2 x Smart fans
Weight
1.17 kg
2.68 kg
2.96 kg
Dimensions (W x D x H)
Power Surge Protection
All Gigabit Ethernet ports support IEC 61000-4-5 surge protection
Operating Temperature
-5 to 50 °C (23 to 122 °F)
Storage Temperature
-20 to 70 °C (-4 to 158 °F)
Operating Humidity
0% to 95% RH
Storage Humidity
0% to 95% RH
EMI
Safety Certifications
BSMI, CE, FCC, VCCI
CE
UL, CB, LVD, BSMI
CB, LVD
DGS-1210ME Series Metro Ethernet Switches
Software
L2 Features
• MAC address table: 16K entries
• Spanning Tree Protocols
-- 802.1D STP
-- 802.1w RSTP
-- 802.1s MSTP
-- BPDU filtering
-- Root restriction
• Loopback detection
• Mirroring
-- Support 1 mirroring group
-- Support One-to-One, Many-to-One,
Flow-based (ACL) mirroring for ingress traffic
• L2 Protocol Tunneling (L2PT)
• Link aggregation
-- Compliant with 802.3ad
-- Supports max. 8 groups, 8 ports per group
L2 Multicasting
• IGMP Snooping
-- IGMP v1/v2 snooping, v3 awareness
-- IGMP authentication/filtering
-- Supports 256 groups
-- VLAN/host-based IGMP snooping fast leave
-- Report suppression
• MLD Snooping
-- MLD v1, MLD v2 awareness
-- Supports 256 groups
VLAN
• 802.1Q tagged VLAN
• VLAN group
• Max. 4094 VLAN groups
• Port-based VLAN
• GVRP
• Asymmetric VLAN
• Max. 256 dynamic VLAN
• 802.1v protocol VLAN
• VLAN trunking
• MAC-based VLAN
• Port-based Q-in-Q
• ISM VLAN (multicast VLAN)
• Private VLAN
L3 Features
• Max. 256 ARP entries
• Supports 255 static ARP entries
• Static route
-- 64 IPv4 static routes
-- 32 IPv6 static routes
• Supports Gratuitous ARP
• Default route
Quality of Service (QoS)
• CoS based on:
-- Switch port
-- 802.1p priority queues
-- VLAN ID
-- MAC address
-- IPv4/IPv6 address
-- DSCP
-- TOS
-- Protocol type
-- TCP/UDP port
-- IPv6 traffic class
• Bandwidth control
-- Port-based (ingress, min. granularity 64 Kbps)
-- Flow-based (ingress, min. granularity 64 Kbps)
-- Egress queue bandwidth control (min. granularity 64 Kbps)
• Queue handling
-- Strict priority
-- Weighted Round Robin (WRR)
• 8 outbound queues
Access Control List (ACL)
• ACL based on
-- Switch port
-- 802.1p priority
-- VLAN ID
-- MAC address
-- EtherType
-- TOS
-- IPv4/v6 address
-- DSCP
-- Protocol type
-- IPv4/IPv6 TCP/UDP port number
-- ICMP
-- IPv6 traffic class
• Up to 256 ingress access rules
• ACL action (permit/deny/mirror)
• Time-based ACL
• ACL statistics
• CPU interface filtering
Authentication, Authorization,
and Accounting (AAA)
• 802.1X
-- Host-based access control
-- Port-based access control
• Guest VLAN
• Host-based MAC authentication
• RADIUS accounting
• TACACS+ accounting
• User account privilege (4 level user access)
• MAC-based access control
-- Max. 512 entries when using local database
• Authentication for management access
-- Local, RADIUS, TACACS+ database
DGS-1210ME Series Metro Ethernet Switches
Security
• SSH v2
• SSL v1/2/3
• Port security (Up to 64 MAC addresses per port)
• IP-MAC-Port Binding (IMPB)
-- ARP inspection
-- IP inspection
-- IPv6 DHCP snooping
• Broadcast/Multicast/Unicast storm control
• D-Link Safeguard Engine
• DHCP server screening
• DHCP client filtering
• BPDU attack protection
• DoS attack prevention
• Traffic segmentation
Operations, Administration,
and Maintenance (OAM)
• 802.3ah Ethernet Link OAM
-- Supports 802.3ah link layer remote loopback and discovery
(System log and SNMP)
-- 802.3ah D-Link extension: D-link Unidirectional Link
Detection (DULD), (System log and SNMP)
• Cable diagnostics
• Dying Gasp
• Supports optical transceiver digital diagnostics monitoring
(DDM)
Management
• Web-based GUI (IPv4/IPv6)
• Command Line Interface (CLI)
• Telnet Server/Client (Support IPv4/IPv6)
• TFTP client (IPv4)
• Command logging
• SNMP v1/v2c/v3
• SNMP traps
• System log
• RMON v1
• RMON v2
• LLDP
• BootP/DHCP client
• DHCP auto-configuration
• Text-editable config file
• Trusted host
• DHCP relay (IPv4/IPv6)
-- DHCP relay agent/local relay
-- DHCP relay option 12, 18, 37, 38, 82
• PPPoE Circult-ID tag insertion
• Trap/alarm/log severity control
• CPU monitoring
• SNTP
• LLDP-MED (for PoE models only)
• Debug command
• Password recovery
• Password encryption
• Backdoor password
MIB
• RFC1212 Concise MIB Definitions
• RFC1213 MIB II
• RFC1215 MIB Traps Convention
• RFC1065, 1151, 2578 MIB Structure
• RFC1493 Bridge MIB
• RFC1157, 2573, 2575, 2576 SNMP MIB
• RFC3418 SNMPv2 MIB
• RFC2819 RMON MIB
• RFC2021 RMONv2 MIB
• RFC1643, 1650, 2665 Ether-like MIB
• RFC2674 802.1p MIB
• RFC 2233 Interface Group MIB
• RFC 2618 RADIUS authentication client MIB
• RFC 2620 RADIUS accounting client MIB
• RFC3289 D-Link Zone Defense MIB
• RFC4022 MIB for TCP
• RFC4113 MIB for UDP
• PoE MIB
• DDP MIB
• LLDP-MED MIB
IETF Standard
• RFC768 UDP
• RFC791 IP
• RFC792 ICMPv4
• RFC2463, 4443 ICMPv6
• RFC793 TCP
• RFC826 ARP
• RFC1321, 2284, 2865, 2716, 3580 Extensible Authentication
Protocol (EAP)
IPv6
• RFC1981 Path MTU Discovery
• RFC2460 IPv6
• RFC2461, 4861 Neighbor Discovery
• RFC2462, 4862 IPv6 Stateless Address Auto-configuration
• RFC2893, 4213 IPv4/IPv6 dual stack function
DGS-1210ME Series Metro Ethernet Switches
Order Information
Part Number
Description
DGS-1210-10/ME
8 10/100/1000BASE-T + 2 1G SFP Ports L2 Management Switch
DGS-1210-20/ME
16 10/100/1000BASE-T + 4 1G SFP Ports L2 Management Switch
DGS-1210-28/ME
24 10/100/1000BASE-T+ 4 1G SFP Ports L2 Management Switch
DGS-1210-52/ME
48 10/100/1000BASE-T+ 4 1G SFP Ports L2 Management Switch
DGS-1210-28P/ME
24 10/100/1000BASE-T PoE + 4 1G SFP Ports L2 Management Switch
DGS-1210-28MP/ME
24 10/100/1000BASE-T PoE + 4 1G SFP Ports L2 Management Switch
DGS-1210-10P/ME
8 10/100/1000BASE-T PoE + 2 1G SFP Ports L2 Management Switch
DGS-1210-52P/ME
24 10/100/1000BASE-T PoE + 24 10/100/1000BASE-T + 4 1G SFP Ports L2 Management Switch
DGS-1210-52MP/ME
48 10/100/1000BASE-T PoE + 4 1G SFP Ports L2 Management Switch
DGS-1210-52MPP/ME
48 10/100/1000BASE-T PoE + 4 1G SFP Ports L2 Management Switch
DGS-1210-12TS/ME
10 1G SFP + 2 10/100/1000BASE-T Ports L2 Management Switch
DGS-1210-28X/ME
24 10/100/1000BASE-T + 4 10G SFP+ Ports L2 Management Switch
DGS-1210-28XS/ME
24 100/1000 Mbps SFP + 4 10G SFP+ Ports L2 Management Switch
Redundant Power Supply (Non-PoE Models Only)
DPS-200A
Redundant Power Supply
DPS-500A
Redundant Power Supply
DPS-500DC
Redundant Power Supply
DPS-CB150-2PS
150 cm RPS cable for connecting DGS-1210-10/ME, 20/ME, 28/ME, 52/ME, 12TS/ME, 28XS/ME, 28X/ME, and DPS-200A/500A/500DC
SU54-21124-000S
Optional 54 W AC to DC Power Supply Unit (PSU) with external lead-acid battery support that can be used as a redundant
power supply, or to connect an external 12 V DC lead-acid battery to charge the switch. The minimum required voltage
for the lead-acid battery is 12 V DC, with a minimum capacity of 2 AH (for DGS-1210-10/ME, 20/ME, 28/ME, 52/ME).
Optional DC Primary Power Supply (Non-PoE Models Only)
SF24-2120200-1C
Input voltage: 72 V DC to 36 V DC, output voltage: 12 V/2 A (for DGS-1210-10/ME, 20/ME, 28/ME B1)
SE40-1120333-3C
Input voltage: 72 V DC to 36 V DC, output voltage: 12 V/3.33 A (for DGS-1210-52/ME B1)
Optional SFP Transceivers
DEM-310GT
1000BASE-LX, Single-mode, 10 km
DEM-311GT
1000BASE-SX, Multi-mode, 500 m
DEM-312GT2
1000BASE-SX, Multi-mode, 2 km
DEM-314GT
1000BASE-LHX, Single-mode, 50 km
DEM-315GT
1000BASE-ZX, Single-mode, 80 km
DGS-712
1000BASE-T 100 m (only supports 1000 Mbps mode) (no Flow Control)
DEM-302S-LX
1000BASE-LX, Single-mode, 2 km
DEM-210
100BASE-FX, Single-mode, 15 km (for DGS-1210-28XS/ME only)
DEM-211
100BASE-FX, Multi-mode, 2 km (for DGS-1210-28XS/ME only)
DGS-1210ME Series Metro Ethernet Switches
Optional WDM SFP Transceiver
DEM-330T
1000BASE-LX, Single-mode, 10 km, Tx: 1550, Rx: 1310 nm
DEM-330R
1000BASE-LX, Single-mode, 10 km, Tx: 1310, Rx: 1550 nm
DEM-331T
1000BASE-LX, Single-mode, 40 km, Tx: 1550, Rx: 1310 nm
DEM-331R
1000BASE-LX, Single-mode, 40 km, Tx: 1310, Rx: 1550 nm
DEM-302S-BXD
1000BASE-LX, Single-Mode, 2 km, Tx: 1550, Rx: 1310 nm
DEM-302S-BXU
1000BASE-LX, Single-Mode, 2 km, Tx: 1310, Rx: 1550 nm
DEM-220T
100BASE-BX, Single-mode, 20 km, Tx: 1550, Rx: 1310 nm (for DGS-1210-28XS/ME only)
DEM-220R
100BASE-BX, Single-mode, 20 km, Tx: 1310, Rx: 1550 nm (for DGS-1210-28XS/ME only)
Optional SFP+ Transceivers (for DGS-1210-28X/ME, 28XS/ME only)
DEM-431XT
10GBASE-SR SFP+ Transceiver (without DDM), 33 m: OM1 MMF, 82 m: OM2 MMF, 300 m: OM3 MMF
DEM-431XT-DD
10GBASE-SR SFP+ Transceiver (with DDM), 33 m: OM1 MMF, 82 m: OM2 MMF, 300 m: OM3 MMF
DEM-432XT
10GBASE-LR SFP+ Transceiver (without DDM), 10 km
DEM-432XT-DD
10GBASE-LR SFP+ Transceiver (with DDM), 10 km
DEM-433XT
10GBASE-ER SFP+ Transceiver (without DDM), 40 km
DEM-433XT-DD
10GBASE-ER SFP+ Transceiver (with DDM), 40 km
DEM-434XT
10GBASE-ZR SFP+ Transceiver (without DDM), 80 km
DEM-436XT-BXD
10GBASE-LR BiDi SFP+ Transceiver (without DDM), Tx: 1330 nm, Rx: 1270 nm, 20 km
DEM-436XT-BXU
10GBASE-LR BiDi SFP+ Transceiver (without DDM), Tx 1270 nm, Rx: 1330 nm, 20 km
Optional SFP+ Direct Attach Stacking Cables (for DGS-1210-28X/ME, 28XS/ME only)
DEM-CB100S
10-GbE SFP+ 1 m Direct Attach Cable
DEM-CB300S
10-GbE SFP+ 3 m Direct Attach Cable
DEM-CB700S
10-GbE SFP+ 7 m Direct Attach Cable
Up to 4 10G SFP+ uplink ports are available in the DGS-1210-28X/ME and DGS-1210-28XS/ME switches.
All Gigabit Ethernet ports of the DGS-1210ME Series switches support up to 6 kV surge protection.
1
2
Please note that the latest firmware for the DGS-1210-28/ME B1 (v7.00) is not backwards compatible with A1 hardware.
Updated 03/31/2017
Specifications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2017 D-Link Corporation. All rights reserved. E&OE.
Download PDF