- No category
advertisement
QuickSpecs
Overview
Hewlett Packard's 2000 Family of storage arrays features P2000 G3 MSA arrays with the latest 8 Gb Fibre Channel, 6 Gb SAS,
10GbE iSCSI connected models, and now with a new iSCSI model with four 1 Gb iSCSI ports per controller. The arrays are designed for entry-level customers and feature the latest in functionality and host-connect technology while offering excellent price/performance. They are ideal for companies with small budgets or limited IT expertise, and also larger companies with departmental or remote requirements. Each solution is designed to be easy to deploy, to be secure, along with low management costs, while driving rapid return on investment through efficient storage consolidation.
The P2000 G3 arrays are 2U storage area network (SAN) or direct connect solutions (OS and protocol dependent) offering a choice of five controllers - two FC, one SAS, one 10GbE iSCSI and the newest model features a four port 1 Gb iSCSI. The first Fibre
Channel controller is a high-performance, 8 Gb dual port model. The second offering is a unique dual-purpose Combo controller with two 8 Gb Fibre Channel ports with the addition of two 1GbE iSCSI ports. The third controller choice is 6Gb SAS with four ports per controller. There is also the addition of a two port 10 Gb iSCSI, while the latest controller introduction features four 1 Gb iSCSI ports per controller. Whatever the situation calls for, the P2000 G3 line-up has the right solution.
The dual-protocol P2000 G3 MSA FC/iSCSI Combo Controller gives exceptional flexibility. The 8 Gb FC ports support a full FC
SAN while the two 1GbE iSCSI ports can serve two purposes. With this combination you can economically share the array storage resource with a smaller department accessing it over iSCSI or enable the new optional Remote Snap functionality over iSCSI protocol
(also available over FC).
The P2000 G3 SAS is the follow-on product to the MSA2000sa G2, adding the latest 6 Gb SAS technology to the four host ports per controller. The P2000 G3 SAS array is designed for directly attaching up to four dual-path or eight single path rack servers. SAS array support for BladeSystems utilizes the recently introduced HP 6 Gb SAS BL Switch.
The P2000 G3 10GbE iSCSI brings the very latest in high-performance host connection with technology generally found only in higher priced arrays. The bandwidth it provides in conjunction with server consolidation is highly advantageous in shared storage configurations. Array connection to 10GbE switches that are in turn connected to 1GbE NICs is commonplace. Directly attached server support requires the server units to have 10GbE NICs.
Rounding out the controller choices is the P2000 G3 iSCSI controller featuring four 1Gb iSCSI Ethernet ports, double the number of the G2 model. This allows an array that keeps the price of the components, particularly the interconnects, low while markedly increasing the performance capabilities.
All P2000 G3 models can be equipped with single or dual controllers, feature the same scalability, and offer 6 Gb SAS back-end transmission speed to drives and JBODs. Significant data protection advances are delivered by the all P2000 G3 arrays. All G3 units come STANDARD with sixty-four snapshot capability at no extra cost and there is an option for the G3 series of five hundred and twelve snapshots. Volume Copy (clone) also comes standard. In a further move to protect the user's data, optional Remote Snap
(replication) capability is offered on the FC, FC/iSCSI, and both iSCSI versions.
All P2000 G3 models support hot plug replacement of redundant controllers, fans, power supplies, and I/O modules. Hot add of expansion enclosures is also supported.
The controller-less P2000 chassis is offered in two models - one comes standard with twelve Large Form Factor (LFF) 3.5-inch drive bays, the other can accommodate twenty-four Small Form Factor (SFF) 2.5-inch drives. Both are able to simultaneously support enterprise-class SAS drives, SAS Midline, and archival-class SATA Midline drives. Either chassis can have one or two matching
P2000 G3 controllers (same protocol) and are available with AC or DC power Supplies.
The HP modular approach to entry level SAN solutions enables incremental customer purchases, allowing the array to grow as needs grow, thus allowing a maximum return on investment. Choose a single controller unit for low initial cost with the ability to upgrade later; or decide on a model with dual controllers for the most demanding entry-level situations. There are no unexpected additional charges, licenses or fees as you add enclosures or hosts and users.
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 1
QuickSpecs
Overview
Capacity can easily be added as the need develops by attaching additional drive enclosures. Maximum capacity ranges with LFF drives up to 57.6 TB SAS, 288 TB SAS Midline or 192 TB SATA Midline with the addition of the maximum number of drive enclosures. Configurations utilizing the SFF drive chassis and the maximum number of drive enclosures can grow to 134 TB of SAS,
149 TB of SAS Midline or 74.5 TB SATA Midline with a total of 96 LFF or 149 SFF drives. The P2000 G3 Arrays do not support
SSDs.
Adding more fully-populated and half-populated P2000 G3 Arrays bundles with ProLiant SFF SAS drives
Added the 10GbE iSCSI controller and the 450GB and 600GB SAS drives to the list of NEBS supported product
Added support for vStorage APIs for Array Integration (VAAI), to offload certain processing functions from the host to the array, which can greatly enhance performance
1. Power supplies 4. Reserved for future use
2. 8 Gb Fibre Channel ports 5. Management Ethernet port
3. CLI port (mini-USB) 6. Expansion port
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 2
QuickSpecs
Overview
1. Power supplies 5. Reserved for future use
2. 8 Gb Fibre Channel ports 6. Management Ethernet port
3. 1GbE iSCSI ports
4. CLI port (mini-USB)
7. Expansion port
1. Power supplies
2. 6Gb SAS ports (four per controller)
3. CLI port (mini-USB)
4. Management Ethernet port
5. Expansion port
1. Power supplies
2. 10GbE iSCSI ports
3. CLI port (mini-USB)
4. Management Ethernet port
5. Expansion port
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 3
QuickSpecs
Overview
1. Power supplies
2. 1 GbE iSCSI ports (4)
3. 1 GbE iSCSI ports (4)
4. CLI port (mini-USB)
5. Management Ethernet port
6. Expansion port
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 4
QuickSpecs
Models
HP P2000 G3 MSA Fibre Channel Controller
HP P2000 G3 MSA FC/iSCSI Combo Modular Smart Array Controller
HP P2000 G3 SAS MSA Array System Controller
AP836A
AP837A
AW592A
HP P2000 G3 10GbE iSCSI MSA Array System Controller
HP P2000 G3 iSCSI MSA Array System Controller
HP P2000 Modular Smart Array 3.5-in Drive Bay Chassis (LFF)
HP P2000 Modular Smart Array 2.5-in Drive Bay Chassis (SFF)
HP P2000 G3 MSA FC Dual Controller LFF Modular Smart Array System
HP P2000 G3 MSA FC Dual Controller SFF Modular Smart Array System
HP P2000 G3 MSA FC/iSCSI Dual Combo Controller LFF Modular Smart Array
System
HP P2000 G3 MSA FC/iSCSI Dual Combo Controller SFF Modular Smart Array
System
HP P2000 G3 SAS MSA Dual Controller LFF Array System
HP P2000 G3 SAS MSA Dual Controller SFF Array System
HP P2000 G3 10GbE iSCSI MSA Dual Controller LFF Array System
HP P2000 G3 10GbE iSCSI MSA Dual Controller SFF Array System
HP P2000 G3 iSCSI MSA Dual Controller LFF Array System
HP P2000 G3 SCSI MSA Dual Controller SFF Array System
HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit
(includes dual 8 Gb FC controllers, 12-drive bay LFF chassis, two 8-port 8 Gb switches, four 8 Gb single-port HBAs, SFPs and cables)
AW595A
BK829A
AP838A
AP839A
AP845A
AP846A
AW567A
AW568A
AW593A
AW594A
AW596A
AW597A
BK830A
BK831A
AP847A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 5
QuickSpecs
Models
HP P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit
(includes dual 8 Gb controllers, 24-drive bay SFF chassis, two 16-port 8 Gb switches, six 8 Gb single-port HBAs, SFPs and cables)
HP P2000 Dual I/O LFF Drive Enclosure, twelve 3.5" drive bays
(w/ two .5m mini-SAS to mini-SAS cables. Used with single or dual controller LFF or
SFF array head)
HP P2000 LFF Drive Enclosure I/O Module (no cable included. Designed exclusively for use with the LFF chassis AP838A to create a single I/O JBOD)
HP D2700 SFF Disk Enclosure, twenty-five 2.5" drive bays
(w/ two .5m mini-SAS to mini-SAS cables. Used with single or dual controller LFF or
SFF array head)
HP P2000 DC-power LFF Chassis
(can add one or two P2000 G3 controllers or P2000 JBOD I/O modules)
HP P2000 DC-power SFF Chassis NEBS certified
(can add one or two P2000 G3 FC or SAS controllers. No P2000 JBOD I/O module support)
In some areas HP is offering P2000 G3 Array bundles with ProLiant SFF SAS drives. These bundles can simplify the process of ordering. HP offers these bundles with different type of P2000 G3 Array controllers for different storage capacity needs.
AP848A
AP843A
AP844A
AJ941A
AP840A
AP841A
FC Bundles
FC/iSCSI
Combo
Bundles
3.5 TB
7.2 TB
14.4 TB
3.5 TB
7.2 TB
14.4 TB
21.6 TB
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
HP P2000 G3 FC DC w/24 146GB
SAS 15K SFF HDD 3.5TB Bundle
HP P2000 G3 FC DC w/24 300GB
SAS 10K SFF HDD 7.2TB Bundle
HP P2000 G3 FC DC w/24 600GB
SAS 10K SFF HDD 14.4TB Bundle
HP P2000 G3 FC/iSCSI DC w/24
146GB SAS 15K SFF HDD 3.5TB
Bundle
HP P2000 G3 FC/iSCSI DC w/24
300GB SAS 10K SFF HDD 7.2TB
Bundle
HP P2000 G3 FC/iSCSI DC w/24
600GB SAS 10K SFF HDD 14.4TB
Bundle
HP P2000 G3 FC/iSCSI MSA DC w/24 900GB SAS 10K SFF HDD
21.6TB Bundle
BV901A
BV902A
BV903A
BV904A
BV905A
BV906A
QR518A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 6
QuickSpecs
Models
24 TB
SAS Bundles
1G iSCSI
Bundles
FC Bundles
FC/iSCSI
Combo
3.5 TB
7.2 TB
14.4 TB
21.6 TB
24 TB
3.5 TB
7.2 TB
14.4 TB
21.6 TB
24 TB
3.6 TB
7.2 TB
10.8 TB
12 TB
3.6 TB
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
DA - 13551 Worldwide — Version 21 — February 13, 2012
HP P2000 G3 FC/iSCSI MSA DC w/24 1TB SAS 7.2K SFF MDL HDD
24TB Bundle
HP P2000 G3 SAS DC w/24 146GB
SAS 10K SFF HDD 14.4TB Bundle
HP P2000 SAS DC w/24 300GB SAS
10K SFF HDD 7.2TB Bundle
HP P2000 SAS DC w/24 600GB SAS
10K SFF HDD 14.4TB Bundle
HP P2000 G3 SAS MSA DC w/24
900GB SAS 10K SFF HDD 21.6TB
Bundle
HP P2000 G3 SAS MSA DC w/24
1TB SAS 7.2K SFF MDL HDD 24TB
Bundle
HP P2000 G3 iSCSI DC w/24
146GB SAS 15K SFF HDD 3.5TB
Bundle
HP P2000 G3 iSCSI DC w/24
300GB SAS 10K SFF HDD 7.2TB
Bundle
HP P2000 G3 iSCSI DC w/24
600GB SAS 10K SFF HDD 14.4TB
Bundle
HP P2000 G3 iSCSI MSA DC w/24
900GB SAS 10K SFF HDD 21.6TB
Bundle
HP P2000 G3 iSCSI MSA DC w/24
1TB SAS 7.2K SFF MDL HDD 24TB
Bundle
HP P2000 G3 FC DC w/12 300GB
SAS 10K SFF HDD 3.6TB Bundle
HP P2000 G3 FC DC w/12 600GB
SAS 10K SFF HDD 7.2TB Bundle
HP P2000 G3 FC MSA DC w/12
900GB SAS 10K SFF HDD 10.8TB
Bundle
HP P2000 G3 FC MSA DC w/12
1TB SAS 7.2K SFF MDL HDD 12TB
Bundle
HP P2000 G3 FC/iSCSI DC w/12
300GB SAS 10K SFF HDD 3.6TB
QR522A
BV907A
BV908A
BV909A
QR519A
QR523A
BV910A
BV911A
BV912A
QR520A
QR524A
BV913A
BV914A
QR525A
QR529A
BV915A
Page 7
QuickSpecs
Models
Bundles
7.2 TB
10.8 TB
12 TB
SAS Bundles 3.6 TB
7.2 TB
10.8 TB
1G iSCSI G3
Bundles
12 TB
3.6 TB
7.2 TB
10.8 TB
12 TB
AMS
APJ
AMS
APJ
EMEA
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
AMS
APJ
Bundle
HP P2000 G3 FC/iSCSI DC w/12
600GB SAS 10K SFF HDD 7.2TB
Bundle
HP P2000 G3 FC/iSCSI MSA DC w/12 900GB SAS 10K SFF HDD
10.8TB Bundle
HP P2000 G3 FC/iSCSI MSA DC w/12 1TB SAS 7.2K SFF MDL HDD
12TB Bundle
HP P2000 G3 SAS DC w/12 300GB
SAS 10K SFF HDD 3.6TB Bundle
HP P2000 G3 SAS DC w/12 600GB
SAS 10K SFF HDD 7.2TB Bundle
HP P2000 G3 SAS MSA DC w/12
900GB SAS 10K SFF HDD 10.8TB
Bundle
HP P2000 G3 SAS MSA DC w/12
1TB SAS 7.2K SFF MDL HDD 12TB
Bundle
HP P2000 G3 iSCSI DC w/12
300GB SAS 10K SFF HDD 3.6TB
Bundle
HP P2000 G3 iSCSI DC w/12
600GB SAS 10K SFF HDD 7.2TB
Bundle
HP P2000 G3 iSCSI MSA DC w/12
900GB SAS 10K SFF HDD 10.8TB
Bundle
HP P2000 G3 iSCSI MSA DC w/12
1TB SAS 7.2K SFF MDL HDD 12TB
Bundle
BV916A
QR526A
QR530A
BV917A
BV918A
QR527A
QR531A
BV919A
BV920A
QR528A
QR532A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 8
QuickSpecs
Features
The HP P2000 G3 Modular Smart Array family encompasses five controllers, each featuring different protocols or combination of protocols to match the exact needs of the user.
P2000 G3 FC/iSCSI Combo MSA controller: this unique controller offers both 8 Gb Fibre Channel and 1 GbE iSCSI functionalities built into a single array controller. This allows customers to enable storage needing high performance thru the
FC ports while leveraging their SAN investment by sharing the array resources with smaller departments through low-cost iSCSI. It also enables optional Remote Snap (replication) for data protection.
P2000 G3 FC MSA controller: Dual 8 Gb Fibre Channel host ports per controller give high performance with a mature topology and is compatible with the largest installed base of SAN users.
P2000 G3 10GbE iSCSI MSA controller: HP is the first of the major modular array manufacturers that brings a high performance dual-ported 10GbE iSCSI solution to the entry level segment. Ideal for those who want to utilize cost-effective
Ethernet as their infrastructure without sacrificing access time to their data. Now supports Remote Snap (replication).
P2000 G3 SAS MSA controller: the P2000 G3 SAS model gives fast 6 Gb transmission rates with low cost SAS connections.
Four host ports per controller support a highly efficient direct connect configuration.
P2000 G3 iSCSI MSA controller offers four 1 Gb iSCSI ports utilizes the popular Ethernet infrastructure with its low cost and ease of management, while the additional ports assure increased performance over the previous generation. Now supports
Remote Snap (replication).
Ease of management featuring browser-based out-of-band access. This allows a department or small company to effectively handle growing storage requirements, with the aid of an intuitive GUI to administer the unit with a minimum of complexity.
Ideal for local or remote installations.
All G3 models come standard with 64 controller-based snapshots and clone capability. The G3 arrays also support an optional 512 snaps.
Choose either a low-cost single controller array or start with a configured dual controller array model to fit the budget, high availability, and performance needs.
All models feature a wide variety of drives: enterprise-class SAS, SAS Midline, and archival-class SATA Midline in either P2000
LFF 3.5-inch or HP ProLiant SFF 2.5-inch drives.
P2000 G3 models can have a maximum number of P2000 LFF drive enclosures (7), a maximum number of D2700 SFF enclosures (5), or mix both sizes. The array can grow incrementally from a few drives to 134 TB SAS, 288 TB of SAS MDL or
192 TB SATA MDL.
2 GB transportable read/write cache per controller. Battery-free cache backup with super capacitors and compact flash
Vdisks can be spanned across multiple enclosures
RAID levels 0, 1, 3, 5, 6, 10, 50
Maximum of 2 drives for RAID level 1, 16 drives for RAID levels 0, 3, 5, 6, and 10, 32 drives for RAID level 50
512 LUNs with LUN sizes greater than 40TB depending on the RAID configuration chosen. The maximum LUN size is 64TB
Non-disruptive on-line controller code upgrade (requires dual controllers w/ multi-pathing software)
Upgradable by design. Owners of an original MSA2000 G1 or G2 array are able to do data-in-place controller upgrades to the P2000 G3 FC, Combo FC/iSCSI, 1 Gb or 10GbE iSCSI, or P2000 G3 SAS. Cross protocol upgrades are also supported between the protocols. This unique ability protects the earlier investments in chassis, drives, and JBODs
Follow us on twitter and be a part of the conversation, and get the latest P2000 G3/MSA related news and information at: http://www.twitter.com/MSAstorage
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 9
QuickSpecs
Features
The new P2000 G3 FC MSA SAN Starter kits are offered to simplify ordering and implementation of your SAN. HP includes all the necessary hardware components to build your own SAN solution in one package, just add the drives of your choice. These kits are offered at very affordable prices which reflects a savings over purchasing each SAN component separately.
AP848A HP P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit
The HP P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit addresses the growing need for server and storage administrators to deliver end-to-end storage, virtualization, and management capabilities across their network infrastructure. The hardware bundle consists of six Host Bus Adapters (HBAs), two FC switches, a P2000
G3 FC MSA Dual Controller Array (SFF Chassis) as well as two licenses per switch enabling Server Application Optimization (SAO) and Adaptive Networking (AN). SAO is an adapter technology that offers Quality of Service (QoS) capabilities that can be used in conjunction with fabric wide QoS and AN to enable a high performing, virtualized infrastructure. With SAO deployed, administrators can protect a VM and its application by assigning its IO flow to a specific priority level. The QoS priorities are enforced at the hardware level, thereby providing adequate bandwidth during periods of high congestion. Applications such as email and databases achieve better performance when deployed in specific SAO and MSA configurations.
HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit
The HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit is a unique end-to-end 8 Gbps SAN Solution, just add disks and power. This kit includes one 8 Gbps P2000 G3 FC MSA Dual Controller Array (LFF Chassis), four 8 Gbps FC
HBAs, two HP SN6000 Stackable 8 Gbps 8-port FC switches and HP unique Simple
SAN Connection Manager (SSCM) SAN management software, cables, rails and optics. SSCM is the only SAN management software that can manage the FC switch,
HBA and provision HP storage from a single pane of glass.
AP847A
The HP P2000 SAN is the ideal solution for customers running Oracle, Microsoft, SAP environments and those customers who are deploying virtual server technologies like VMware, Hyper-V, and Oracle Virtual
Machine. The HP P2000 SAN delivers enterprise functionality that enhances virtual environments, simplifies management, and reduces costs. Easy to deploy, scale and maintain, HP P2000 SANs ensure that crucial business data remains available.
HP has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization Hypervisor technology through extensive testing with the HP P2000 SAN, HP servers, and management software; high availability and disaster recovery solutions; and backup and recovery on the Oracle, Microsoft, and
SAP application platforms. As a result, our customers can expect a wide range of operational and business benefits where they can:
Deploy IT assets across multiple locations.
Incrementally grow storage without interruption.
Enable high availability and disaster recovery capabilities for critical applications.
Deploy a remote disaster recovery site.
To learn more about specific HP Storage Solutions that are built with Oracle, Microsoft, SAP and
Virtualization environments in mind, visit the solution sites supporting each of these applications.
HP Storage for Oracle hyperlink to: http://www.hp.com/storage/oracle
HP Storage for Microsoft hyperlink to: http://www.hp.com/storage/microsoft
HP Storage for SAP hyperlink to: http://www.hp.com/storage/sap
HP Storage for VMware hyperlink to: http://www.hp.com/go/vmware/storage
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 10
QuickSpecs
Family Information
Minimum / with maximum additional drive enclosures
LUN sizes greater than
40TB depending on the
RAID configuration chosen or 36 TB SAS MDL or 24
TB SATA MDL w/ 7 LFF enclosures:
57.6 TB SAS,
288 TB SAS MDL or 192
TB SATA
SFF: 21.6 TB SAS or 24 TB SS MDL or 12
TB SATA MDL w/ 5 D2700 JBODs:
134 TB SAS or 149 TB SAS MDL or
74.5 TB SATA MDL or 36 TB SAS MDL or 24
TB SATA MDL w/ 7 LFF enclosures:
57.6 TB SAS,
288 TB SAS MDL or 192
SATA
SFF: 21.6 TB SAS or 24 TB SAS MDL or 12
TB SATA MDL w/ 5 D2700 JBODs:
134 TB SAS or 149 TB SAS MDL or
74.5 TB SATA MDL
2 GB per controller
512 maximum LUN size:
64TB
2 GB per controller
512 maximum LUN size:
64TB
P2000 & MSA2000 have
1 or 2 controllers, EVA has 2 controllers standard
Two 8 Gb
Fibre Channel ports or
Two 8Gb FC and two
1GbE iSCSI ports per controller
96 LFF/149 SFF
Four 6 Gb (x4)
SAS ports per controller
96 LFF/149 SFF w/ expansion
(dual controller)
64
Snapshot, 64 standard
(max 512)
Clone (standard)
Remote Snap (optional)
Primary Storage with SAS drives.
Secondary with SATA
64 w/ SAS switch: 32 single blade servers (2x c7000), or 16 dual density blade servers
Snapshot, 64 standard
(max 512)
Clone (standard)
Primary Storage with SAS drives.
Secondary with SATA or 36 TB SAS MDL or 24
TB SATA MDL w/ 7 LFF enclosures:
57.6 TB SAS,
288 TB SAS MDL or 192
TB SATA
SFF: 21.6 TB SAS or 24 TB SAS MDL or 12
TB SATA MDL w/ 5 D2700 JBODs:
134 TB SAS or 149 TB SAS MDL or
74.5 TB SATA MDL
2 GB per controller
512 maximum LUN size:
64TB
Two 10 GbE iSCSI ports per controller
96 LFF/149 SFF
64
Snapshot, 64 standard
(max 512)
Clone (standard)
Remote Snap (optional)
Primary Storage with SAS drives.
Secondary with SATA or 36 TB SAS MDL or 24
TBSATA MDL w/ 7 LFF enclosures:
57.6 TB SAS,
288 TB SAS MDL or 192
TB SATA
SFF: 21.6 TB SAS or 24 TB SAS MDL or 12
TB SATA MDL w/ 5 D2700 JBODs:
134 TB SAS or 149 TB SAS MDL or
74.5 TB SATA MDL
2 GB per controller
512 maximum LUN size:
64TB
Four 1 Gb iSCSI ports per controller
96 LFF/149 SFF
64
Snapshot, 64 standard
(max 512)
Clone (standard) Remote
Snap (optional)
Primary Storage with SAS drives.
Secondary with SATA
Two host ports per FC controller shipped with SFPs. The P2000 G3 FC controller can run in either pointto-point or FCAL (loop). The default is FCAL which is used in Direct Connect, particularly with two controllers. The PtP (fabric) mode is used with almost all switches.
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 11
QuickSpecs
Family Information
This ingenious dual-protocol "combo" controller supports a full FC SAN through the 8Gb FC ports, while designating the two 1 GbE iSCSI ports to enable remote replication over iSCSI protocol and perform as an iSCSI target. This allows economical sharing of the storage resource (the P2000 G3 array) with one department needing the performance afforded by the 8 Gb FC ports while simultaneously supporting another department with lesser performance needs and a budget only allowing a 1GbE iSCSI network.
Four 4x host ports per 6Gb SAS controller.
Supports the ProCurve and ISS versions of the following 10GbE parts for use in the controllers:
HP 10Gb Cables
HP SFP+ 10GbE Copper Cable
HP ProCurve 10-GbE SFP+-SFP+ Direct Attach Cable
HP SFP+ Transceivers
HP BladeSystem 10Gb SR SFP+ and HP BladeSystem 10Gb LRM SFP+
HP ProCurve 10-GbE SFP+ SR Transceiver and HP ProCurve 10-GbE SFP+ LRM Transceiver
No SFP+ LR Transceiver support
1 Gb iSCSI controller Four 1 Gb Ethernet iSCSI ports per G3 iSCSI controller
2U rack height. 12 Large Form Factor or 24 Small Form Factor drive bays, accommodating SAS and
SATA. Comes with space for one or two controllers, or P2000 3.5-inch disk Enclosure I/O modules (LFF chassis only)
The P2000 G3 controllers support both the P2000 3.5-inch Large Form Factor (LFF) drives, and the HP
ProLiant 2.5-inch Small Form Factor (SFF) drives.
Serial Attached SCSI (SAS) enterprise-class drives are designed for high demand, 24x7 usage.
SAS Midline and SATA Midline are usually reserved for archival of data as they are both relatively inexpensive and are available in very large capacities.
The HP entry-level family of arrays can accommodate both SAS and SATA drives within the same enclosure making it ideal to have both business-critical, high activity files on SAS drives while using
Snapshot, clone, or Remote Snap capability to keep back-up or archival data on the less expensive drives.
For investment protection, the controllers will support single and dual port SAS & SATA drives in a legacy single - or dual - domain MSA70. This support allows current owners of MSA70s to migrate their single port drives (in their MSA70 only, not into the array head) to be attached to a P2000 G3 FC or SAS. They can only cascade to another single I/O MSA70. This is not a data-in-place transition, and overall performance could be impacted.
SAS drive performance can be approximately 30% greater than SATA performance on sequential host
I/O. SAS performance excels in sequential lower latency response time and random I/O per second transaction performance due to higher rpm disk speeds yielding lower seek times. SAS drive random performance is generally twice that of SATA drives.
MSA2000 models. The 2.5-inch Small Form Factor (SFF) drives are supported only with the P2000 G3 or the MSA2300 G2 controllers and are common with and are the same part numbers as the ProLiant hotplug 2.5-inch drives.
Just as the user has a choice of chassis for the array head (LFF and SFF drive bays, AC or DC powered), so also do they have a choice of expansion disk enclosures accommodating either drive size. Both the
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 12
QuickSpecs
Family Information
P2000 and the D2700 disk enclosures can be hot-added to an operating array.
( NOTE: these are not supported as part of a NEBS-certified configuration with the MSA Carrier Grade
Chassis. There is a certified JBOD listed in the Carrier-grade section ) dual-ported SAS and SATA drives. The pre-configured HP P2000 Dual I/O LFF Drive Enclosure (AP843A) has two I/O modules and supports both single and dual controller arrays. If a single I/O disk enclosure model is desired, the appropriate chassis should be purchased along with a single I/O module (AP844A).
This 3.5-inch drive enclosure can be attached to either the P2000 G3 FC or SAS LFF or SFF array head.
Each configured model ships standard with two .5m mini-SAS to mini-SAS cables for cascading to other P2000 drive enclosures
Up to seven P2000 3.5-inch enclosures can be attached to a P2000 G3 FC, FC/iSCSI Combo, or
SAS controller in the array head.
ProLiant 2.5-inch Universal form factor (SFF) 6Gb SAS or SATA hard drives. It ships standard with dual
I/O modules installed.
This 2.5-inch drive enclosure can be attached to a P2000 G3 controller (SFF or LFF) array head
The D2700 enclosure ships with a two .5m miniSAS to miniSAS cable.
Up to five D2700 may be attached to the P2000 G3 array head, given total support for 149 SFF drives.
The P2000 G3 FC, Combo FC/iSCSI, SAS, 1 Gb or 10GbE iSCSI controllers are designed to allow an installation to begin with smaller capacity and be able to grow gradually as needed. The flexibility of SAS or SATA drive technology, form factors, sizes, speeds, and costs per GB allows a system to easily fit in almost any budget.
Large Form Factor configurations can scale up to 7.2 TB SAS, 36TB SAS MDL or 24 TB SATA, expandable to 57.6 TB SAS, 288TB SAS MDL or 192 TB SATA with the addition of a maximum of seven P2000 3.5-inch Drive Enclosures.
Small Form Factor configurations can scale from 21.6 TB SAS, 24 TB SAS MDL or 12 TB SATA
MDL. With the addition of five D2700 JBODs, the P2000 G3 can support 134 TB SAS, 149 TB
SAS MDL or 74.5 TB SATA MDL.
Users may configure a 24-drive P2000 G3 SFF array head with 12-drive LFF P2000 3.5-inch disk enclosures. This is an excellent method for a configuration that supports fast SFF enterprise-class
SAS drives in the array head, combined with economical LFF drives staged for archival purposes, all in the same array.
Qualification of larger capacity drives is ongoing.
Vdisks can span across multiple enclosures, where drives used in the Vdisk can be contained in different enclosures. The maximum number of drives that can be used in RAID 1 Vdisk is 2; RAID 0, 3, 5, 6, and
10 is 16; and for RAID 50 Vdisk is 32.
The HP 2000 family of arrays supports 512 LUNs (total volumes in a dual controller system) and LUN sizes up to 64 TB depending on the RAID configuration chosen. The array supports expansion and deletion of any LUN.
In addition to the usual RAID levels, the P2000 G3 features several important additional levels. RAID 6 is the highest level of RAID protection. It allocates two sets of parity data across drives and allows simultaneous write operations. It can withstand two simultaneous drive failures without downtime or data loss. RAID 10 is mirroring and striping without parity. It is the most popular of the multiple RAID levels, allowing large arrays with high performance in most cases and superior fault tolerance. RAID 50 combines the block striping and parity of RAID 5 with the straight block striping of RAID 0, yielding higher performance than RAID 5 through the addition of RAID 0, particularly during writes.
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 13
QuickSpecs
Family Information
Performance numbers are a guideline as established by tests using RAW I/O in an Operating System
Agnostic test lab environment. 144 GB 15K SAS drives were used in a dual controller configuration of 12 vdisks consisting of twelve disks per vdisk, 1.6 TB volumes, and 3 volumes per host. 4 hosts directly attached to the P2000 G3 array were used in this test configuration (results cannot be expected with a single host). Results were achieved in Sequential Writes with 256K blocks; all random tests were based on
8K block sizes.
the number of hosts will affect overall performance. This table is provided strictly as a test-lab comparison.
Note: These numbers reflect a full array configuration with the maximum number of front-end ports, disks, and controllers. The test results shown for the P2000 G3 are preliminary and designed to give a reference point for comparisons. They will be reposted shortly when finalized.
Protocol (host connect)
Sequential Reads
MB/s
Sequential Writes
MB/s
Random Mix IOPs
60/40 read/write
8 Gb
Fibre Channel
1,650
850
20,500
6 Gb
SAS
1,650
850
23,500
10Gb
Ethernet
1,600
800
18,500
1 Gb
Ethernet
550
525
17,200
Sequential Reads
MB/s
Sequential Writes
MB/s
Random Mix IOPs
60/40 read/write
1,650
1,300
14,000
1,650
1,350
16,000
1,600
1,000
12,500
550
525
9,400
Sequential Reads
MB/s
Sequential Writes
MB/s
1,650
1,300
1,650
1,100
1,600
1,000
550
525
Random Mix IOPs
60/40 read/write
8,300 9,800 7,500 5,600
Refer to the paper titled "Upgrading the HP MSA2000 (G1 or G2) to the P2000 G3 MSA ", available in the Resource Library at: www.hp.com/go/p2000 .
HP is making the two models of controller-less chassis available with direct current (DC) power supplies.
They each have the two empty bays where users can insert one or two P2000 G3 controller(s). In addition, the P2000 chassis with LFF drive bay can have P2000 3.5-inch I/O modules inserted to create a LFF DCpower JBOD.
The 500 watt power supply is designed to operate over the input range of -40VDC to -75VDC.
AP840A HP P2000 DC-power LFF twelve 3.5-in Drive Bays
(supports up to 2 controllers or I/O modules)
HP P2000 DC-power SFF twenty-four 2.5-in Drive Bays
(supports up to 2 controllers, not I/O modules)
AP841A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 14
QuickSpecs
Family Information
protocol
HP Storage Management Utility (SMU). Management access, out-of-band: WEB GUI, CLI. Interface
Types: USB, 10/100 Ethernet. Protocols Supported SNMP, SMI-S, SSL, SSH, SMTP, FTP, HTTP, Telnet
All product documentation (CD can be used on ALL supported server Operating Systems.)
MSA Device Discovery Tool (Win and Linux) - reports P2000/MSA HW devices, and supported storage software
Host Software Bundles (Win and Linux for both ProLiant x86, ProLiant x64 and Integrity IA64servers)
CD updated quarterly on HP.com with sustaining firmware updates
All P2000 G3 models support hot plug expansion and replacement of redundant controllers, enclosures, fans, power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of disk enclosures is also supported.
All G3 arrays come standard with 64 snaps, 512 snaps available. Controller based functionality. Offers higher levels of data protection, enabling an almost instant recovery from data failure or corruption.
Offers alternative development testing of 'offline' production data and the ability to backup snapped/cloned data.
The P2000 G3 arrays come integrated with web browser and CLI based software for storage and RAID management, setup, configuration, and troubleshooting. This reduces the cost of ownership by reducing the training and technical expertise necessary to install and maintain your HP storage solution.
The SPOCK database provides interoperability information for thousands of components and millions of component combinations. It is available to all users at http://www.hp.com/storage/spock .
Supports most HP ProLiant, BladeSystems and Integrity servers including
HP ProLiant DL, ML
HP c-Class Blade Servers
Integrity servers, IA64 (FC and FC/iSCSI support only)
Compatibility must be confirmed at: http://www.hp.com/storage/spock
Supports most multi-vendor industry standard 32-bit Intel and AMD based (x86) servers. HP requires the Third-Party Server to be logo'd and listed on the Microsoft Windows Server Catalog.
Refer to the Microsoft website: http://www.microsoft.com/windows/catalog/server/
HP Division recommends that the Third-Party Server Vendor is an active member of TSANet. Refer to the TSANet website for details: www.tsanet.com
Non-HP servers will generally be supported if the HP storage stack is used. This includes supported
HP branded HBAs and drivers, and supported FC switches.
Refer to the HP support statements for complete current OS version support: http://www.hp.com/storage/spock
Microsoft Windows Server 2008 IA32, x64, IA64 (Standard, Enterprise, Datacenter)
Microsoft Windows Server 2008 R2 x64
Microsoft Windows 2003 SP1, SP2, and R2 and 2003 R2 IA32, x64
HP-UX
Red Hat Linux (32/64)
SuSE SLES (32/64)
Microsoft Windows Server 2008 x64 Hyper-V
VMware
OpenVMS
Apple Mac OS X (requires ATTO Celerity 8Gb FC HBA)
Solaris 10 (x86)
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 15
QuickSpecs
Family Information
HP-UX
Windows
OpenVMS
Linux
Microsoft Windows Server 2008 and 2008 R2 (x64, IA64)
Microsoft Windows Server 2008 x64 Hyper-V
Microsoft Windows 2003 (SP1, SP2, and R2) and 2003 R2 (IA32, x64)
Red Hat Enterprise Linux (32/64)
SuSE Linux IA32, x64
VMware ESX
Refer to the HP support statements for complete current OS version support: http://www.hp.com/storage/spock
Microsoft Windows Server 2008 IA32, x64
Microsoft Windows Server 2008 R2
Microsoft Windows 2003 and 2003 R2 IA32, x64
Red Hat Linux (32/64)
SuSE SLES (32/64)
Microsoft Windows Server 2008 x64 Hyper-V
VMware
Solaris 10 (x86)
Microsoft Windows Server 2008 SP1, SP2, R2
Microsoft Hyper-V (x64 only)
Microsoft Windows Server 2003 and 2003 R2, SP2
VMware
Red Hat Linux (32/64)
SuSE SLES (32/64)
Microsoft Windows Server 2008 SP1, SP2, R2
Microsoft Hyper-V (x64 only)
Microsoft Windows Server 2003 and 2003 R2, SP2
Red Hat Linux (32/64)
SuSE SLES (32/64)
VMware must be to a 10GbE NIC and supported by the OS.
The P2000 G3 and the older MSA2000 support target based management, and include a Web interface and a telnet interface, and require a web browser for management.
The P2000 G3 FC requires Microsoft Internet Explorer V7.x or V8.x
The original MSA2000 and the MSA2000 G2 arrays require Microsoft Internet Explorer V6.X and
V7.X (strongly encouraged)
Mozilla Firefox 1.0.7 or later is supported
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 16
QuickSpecs
Optional Software
HP Insight Control Storage Module for vCenter is a component within the HP Insight Control plug-in for vCenter. It provides VMware administrators that are using VMware's vSphere management console
(vCenter) with the ability to see how virtual machines are mapped to datastores and individual P2000 volumes. By providing these clear relationships between VM's, datastores and storage, the VMware administrator's productivity increases, as does the ability to ensure quality of service. Roles for administrators can be defined on an individual basis, providing the ability to apply specific permissions for both view and control functions.
The HP Insight Control Storage Module for vCenter supports mixed array environments including EVA,
P4000, P2000 (MSA), and the XP array series including the P9500.
When deployed with the P2000 array, provides the following:
Active Management functionality for the P2000 array:
Create/Expand/Delete a Datastore
Create a Virtual Machine from a template
Monitors the health and status of the P2000
Displays LUN / volume connections from VMs and ESX servers to the arrays and provides the location and attributes of the P2000 within the SAN
Identifies what storage features are available to allow administrators to match the features available on the P2000 to their requirements
Provide a cluster-level view of the storage
HP Insight Control Storage Module for vCenter is downloadable from Software Depot: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVPR
For more information on HP Insight Control Storage Module for vCenter visit: www.hp.com/go/vmware
The vStorage API for Array Integration (VAAI) is one of the storage application programming interface
(API) sets in vSphere 4.1. VAAI is an API storage partners can leverage to enhance performance of virtual machine (VM) management operations by delegating these operations to the storage array. With hardware offload, ESX/ESXi hosts perform certain operations faster and consume less server CPU and memory resources, and also storage port and storage fabric bandwidth. VAAI includes high performance and scalable VM data path primitives. HP introduced VAAI support for HP MSA P2000 Storage array products starting with the T230 firmware release.
Storage Hardware Primitives for VAAI
In the VMware vSphere 4.1 release, the HP StorageWorks P2000 G3 MSA Array Systems offload capabilities support the following three primitives:
Full Copy or Hardware Assisted Move
Block Zeroing or Hardware Assisted Zeroing
Hardware Assisted Locking or Atomic Test and Set (ATS)
The HP Management Pack for Systems Center Operations Manager provides seamless integration with
Microsoft Systems Center Operations Manager and now System Center Essentials by integrating predefined discovery and state monitoring policies, event processing rules and tasks, and diagram and
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 17
QuickSpecs
Optional Software
topology views for the storage system.
For more information: http://h18000.www1.hp.com/products/quickspecs/14249_div/14249_div.html
HP Storage Management Pack can be downloaded free from the following website: http://h18006.www1.hp.com/storage/SCOM_managementpack.html
Snapshots create up to 512 point-in-time pictures of data (512 snaps are exclusive to the P2000
G3)
Volume Copies create up to 128 point-in-time copies of data
Recovery is instant - revert data from any previous Snapshot or Volume Copy
Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
A 64 snapshot license and Volume Copy are included with all P2000 G3 models.
Support and updates are desired for bundled software functionalities (such as 64 LTU Snap and/or
Volume Copy etc in the P2000 G3 products) a combination HW + SW support care pack must be purchased.
HP does not provide warranty assistance for software products included with our base hardware products. This would either be SupportPlus or SupportPlus24. The hardware warranty component of these services is accounted for in the pricing of the SP and SP24 care packs.
Snap or clone data to test the performance of a software application on 'offline' production data
Snap or clone data to test how a software patch or enhancement will function on 'offline; production dat0061
G3 controllers/models come STANDARD with 64 snapshots and Volume Copy software
512 Snapshot option is ONLY available and supported with the G3, not the prior generation MSA2000 models
HP P2000 Snapshot 512 Software LTU
HP P2000 Snapshot 512 Software E-LTU
TA806A
TA806AAE
Snapshot and Volume Copy software is optional on models other than the P2000 G3.
The following skus are designated for use by the MSA2000 G2 models. They are neither necessary nor available for the P2000 G3 FC.
HP 2000 Modular Smart Array Snapshot 255 Software LTU
1
T5539A
HP 2000 Modular Smart Array Snapshot 64 Software LTU
HP 2000 Modular Smart Array Snapshot 8 Software LTU
HP 2000 Modular Smart Array Snapshot 8/255 Upgrade Software LTU
1
HP 2000 Modular Smart Array Snapshot 64/255 Upgrade Software LTU
1
T5512A
T5513A
T5540A
T5541A
HP 2000 Modular Smart Array Snapshot 8 to 64 Upgrade Software LTU
HP 2000 Modular Smart Array Volume Copy Software LTU
1
The snapshot software is supported on G2 and G3 models only. 512 snaps only applies to G3 controllers.
T5515A
T5514A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 18
QuickSpecs
Optional Software
HP P2000 Remote Snap Software is array based software that provides remote replication on the
HP P2000 G3 MSA Array products (except SAS model). HP Remote Snap is a form of asynchronous replication which consists of replication of block-level data from a volume on a local system to a volume that may be on the same system or on a second independent system. This second system may be collocated with the first system or may be located at a remote site. It requires T230Rxx controller firmware or higher.
HP Remote Snap functionality is based on existing Snapshot technology offered by HP P2000 SAN
Array products. Snapshots are used to track the data to be replicated as well as to determine the differences in data updated on the master volume, minimizing the amount of data to be transferred.
HP Remote Snap replication technology provides the ability to accomplish key data management and protection capabilities. First, because Remote Snap uses snapshots as the underlying technology it creates multiple local recovery points which can be used for such tasks as to complement daily backups; second, replication provides the ability to access data in a remote site which could be used for dispersed operations; and third but definitely not least important replication allows for business continuance in the event of a failure on the primary site.
In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a point-in-time image of the data. This point-in-time image is then replicated to the destination volume by copying the data represented by the snapshot via a transport medium such as TCP/IP
(iSCSI) or Fibre Channel. The amount of data transferred is minimized though the use of snapshots whenever possible.
HP P2000 Array System Remote Snap Software LTU TA808A
HP P2000 Array System Remote Snap Software E-LTU TA808AAE
P2000 arrays performing replication (from Primary system to Remote System), you will need 2 licenses).
Storage based asynchronous snapshot replication
Initial copy of data can be performed locally, reducing burden on wide area networks
Support of both Ethernet and Fiber Channel interconnects provides flexible options to the application environments.
Snapshot based replication technology means only changed data will be replicated to alternate site
Many to 1 replication (up to 4 nodes) - primary use case is to replicate from "many" branch offices to the home office for the purpose of backing up data from the branches
Single controller to single controller replication
Mixed controller replication - replication between P2000 G3 Fibre Channel and P2000 G3
FC/iSCSI Combo arrays
Advanced scheduler provides several options to IT administrators for business continuance
Flexible architecture allows remote replication between P2000 G3 Fibre Channel and/or P2000
G3 FC/iSCSI Combo arrays. Protects existing investments and enhances business continuity planning objectives.
Replication Wizard simplifies the task of setting up and establishing replication pairs from one unified, easy to use GUI.
Snapshot based replication enables both local and remote recovery depending on the need.
Snapshot replication isolates problems to a specific point in time which can be selected by the administrator. Additionally snapshot replication supports longer distance replication.
Multiple relationships provide greater storage flexibility and utilization.
Bundled 64 Snapshots and Volume Copy integration provides better efficiencies by combining the management and array technologies to create local copies.
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 19
QuickSpecs
Optional Software
Fast application recovery with minimal or no transaction loss
Creation of disaster tolerant copies of your critical business data
No-single-point-of-failure solution to increase the availability of your customers data
Remote snap operations and I/O can be processed simultaneously on HP 1GbE iSCSI MSA and
HP 10GbE iSCSI MSA System controllers
Replication technology has typically been used to address disaster recovery issues. Disaster recovery is still the driving business case behind replication. Remote replication can be implemented from the production site to one or more remote sites across a campus, across town, across a state or across the country.
When a disaster strikes the primary location, the applications can be brought up at the remote site and continue processing against the replicated copies. When the primary site is back online, the replication can be reversed and when the data is resynchronized, processing can be switched back to the primary site and business can continue. In the past, if an e-mail system experienced a disaster it was an "oh well" moment. The loss of a day or more of e-mail was not considered important. Today, e-mail is a critical component of many companies' business plans and recovering e-mail after a disaster quickly and completely is required.
HP Remote Snap software can also be used to solve other business needs. For instance, E-mail servers may need periodic maintenance that can take hours to complete. With remote replication in place, the downtime can be minimal (as long as it takes to bring the remote peer of the primary e-mail server online). The primary server can be worked on (patches, hardware upgrades, etc.) and then brought back online and into production. A whole datacenter can be failed over to a remote site on purpose to perform maintenance on generators, air conditioning, etc. Replication can also be used to perform a datacenter move with minimal downtime (fail everything to the DR site, move the production datacenter to its new location then fail the DR site back to the new datacenter).
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 20
QuickSpecs
Optional Software
Data replication is performed at the storage subsystem controller level and is totally transparent to the host, alleviating unnecessary host cycles to perform the data mirroring functions. Unlike a fabric based or host based solution, the storage based solution dedicates its resources to managing the replication process between arrays, with minimal impact to applications, other data or devices on the SAN.
The bidirectional HP P2000 Array solution addresses the growing need among businesses to ensure continuous availability of applications that are critical to daily business operations. HP P2000 enables two sites in a remote replication connection to use each other as a destination to maintain replicated copies of online data. This maximizes resource utilization while enabling business continuance, even in the event of disaster.
The P2000 G3 FC products utilize snapshot data online and in real time to a remote P2000 G3 through a local or extended storage area network (SAN). Additionally, data replication can be bidirectional, meaning that a storage array can be both a source and a destination. A particular LUN can be replicated in only one direction between the two storage arrays. Write I/O data sent to the source is replicated by
HP P2000 Array to the destination. A pair of properly configured HP P2000 G3 FC arrays is a replication solution that guarantees data integrity in the event of a storage system or site failure.
When a DR site is initially created a normalization or initial copy of the data from the source volume to the target volume must occur. The P2000 G3 array allows this first copy to take place locally. After completion the disks can me manually moved to the remote location. Subsequent changes will only remotely copy the changed blocks.
HP P2000 G3 Array provides the capability to replicate data over direct Fibre Channel. The distances supported over dark fiber are determined by the speed of the dark fiber connection and the technology used to communicate over the dark fiber.
MPIO for Windows provides a single multi-path solution for HP P2000 G3 Modular Smart Array on HP servers.
Support for Windows 2003 and Windows 2003 R2 operating systems is provided by HP MPIO Full
Featured DSM. For the P2000 G3 this version is 2.6.1.7 or greater.
Support for Microsoft Windows 2008 is bundled within the operating system
Support for Linux distributions is with Device Mapper 4.4.0 or greater.
Support for HPUX is native multipathing in HP-UX v3 and PV-Links in HP-UX v2.
Stretch your P2000 array investment by adding file & print services, iSCSI connectivity, and management hosting with an X3000 G2 Series Network Storage Gateway platform. X Series Network Storage
Gateways are optimized file and print server solutions that are built on industry-standard HP ProLiant servers and come with Microsoft Windows Storage Server 2008 R2 operating system pre-installed. Since they're Windows-based, network integration is easy, your tools and data protection applications run right on the box, and management has a familiar look and feel. Like many Network Attached Storage (NAS) devices, they support heterogeneous file serving environments and are pre-configured to install in minutes.
An X3000 G2 Network Storage Gateway is a file/iSCSI gateway that adds IP-based services to your Fibre
Channel array or SAN. So it not only enhances your P2000 investment with file and print services, but it helps you save even more by enabling tiered (Fibre Channel and iSCSI) block access for application servers. All of your important client and server data can be managed, scaled, and protected on a single
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 21
QuickSpecs
Optional Software
P2000 G3 array.
NOTE: www.hp.com/go/X3000
The P2000 G3 is an 8 Gb Fibre Channel connected 2U storage area network (SAN) or direct connect solution designed for network equipment providers (NEPs) and communication service providers. Suited for those who need a robust telecom infrastructure--- they need storage devices to catch videos, photos, text, new services---need a place to have the data stored and cached.
The HP P2000 Carrier-Grade Chassis (AP841A) is a controller-less 6Gb chassis capable of supporting one or two P2000 G3 8Gb Fibre Channel controllers (AP836A) and has twenty-four Small Form Factor
(SFF) drive bays. It comes equipped with two DC-power power supplies.
The HP P2000 2.5-in Dual I/O JBOD is a special model disk enclosure designed only for use with the carrier-grade array heads. It has 24 drive bays (unlike the D2700 with 25 drive bays) and has dual DCpower supplies. It is only sold with a carrier grade array. Five of these JBODs may be cascaded from the array head.
When used in conjunction with specific ProLiant SFF SAS drives, the solution is NEBS certified. NEBS level-
3 certification provides the assurance that the equipment is safe to operate and sturdy enough to withstand certain physical and environmental (for example, fire, earthquakes) conditions. For Seismic
Zone 4 rating, the P2000 must be mounted in an HP Seismic Rack (AH335A)
HP P2000 Modular Smart Array 2.5-in Drive Bay Carrier-Grade Chassis.
HP P2000 G3 MSA Fibre Channel Controller
HP P2000 G3 10GbE iSCSI MSA Array System Controller
HP P2000 G3 SAS MSA Array System Controller
HP Modular Smart Array SC08e 2-ports Ext PCIe x8 SAS Host Bus Adapter
AP841A
AP836A
AW595A
AW592A
614988-B21
BV921A HP P2000 2.5-in Dual I/O DC-power Drive Enclosure.
24-drive SFF bays, NEBS certified, NOTE: only sold with carrier-grade arrays
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
512547-B21
507127-B21
581284-B21
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 22
QuickSpecs
Optional Software
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP FC2242SR 4Gb PCIe DC Host Bus Adapter
HP 82E 8Gb Dual Port PCI-e Fibre Channel Host Bus Adapter
For more information on HP Carrier Grade Platforms go to http://www.hp.com/products1/servers/carrier_grade/index.html?
jumpid=reg_R1002_USEN
581286-B21
A8003A
AJ763A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 23
QuickSpecs
Service and Support, HP Care Pack, and Warranty Information
Three-year limited warranty, parts exchange Next Business day delivery
Enclosures, Hard drives, and Options for the P2000 G3 FC carry their own warranty. Refer to HP's
Limited Warranty Statement for more information.
The P2000 G3 FC has been designed with customer self repairable parts to minimize repair time and provide greater flexibility in performing defective parts replacement. Please refer to HP's limited warranty
Statement and parts replacement instructions for further details.
http://h18006.www1.hp.com/products/storageworks/warranty.html
Products included in various kits carry their own individual warranties.
iSCSI products is different for SAS hard drives versus SAS MDL and SATA hard drives. SAS hard drive options have a three year warranty and SAS MDL and SATA hard drives options have a one year warranty.
HP Care Pack Services: Packaged server and storage services for increased uptime, productivity and ROI
When you buy HP server and storage products and solutions, it's also a good time to think about what levels of support you may need. Our portfolio of service options reduce deployment and management worries while helping you get the most out of your server and storage investments. We take a holistic approach to your environment, bridging servers, blades, storage, software and network infrastructures with our packaged HP Care Pack Services for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment warranties have matured along with technology. Good news that can also create problems stemming from depending on standard warranties designed to only protect against product defects and some downtime causes. Using a standard approach to warranty uplifts, such as HP Care Pack Services, helps reduce downtime risks and provides operational consistency for mission-critical and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and storage warranties cost effectively
HP Care Pack Services offer a standard reactive hardware and software support services suite sold separately, or combined with our
Support Plus and Support Plus 24 services. The portfolio also provides a combination of integrated proactive and reactive services, such as Proactive 24 Service and Critical Service. In addition with HP Proactive Select, you can acquire the specific proactive constancy and technical services. HP Proactive Select menu offers a broad set of service options that you can mix and match depending on your specific requirements. Proactive service options include offers for server, storage, network, SAN device, software, environment and education services.
HP server and storage lifecycle support services offers a full spectrum of customer care-from technology support to complex migrations to complete managed services. HP Factory Express provides customization, integration and deployment services for turnkey solutions. HP Education Services offer flexible, comprehensive training on to help your IT staff get the most out of your server and storage investments. HP Financial solutions extend innovative financing and cost-effective asset management programs-from purchase to equipment retirement.
Learn more: www.hp.com/services/servers and www.hp.com/services/storage
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 24
QuickSpecs
Service and Support, HP Care Pack, and Warranty Information
http://www.hp.com/go/lookuptool
For a higher return on your server and storage investment, HP Support Plus 24 provides integrated hardware and software support services designed specifically for your technology. Available 24x7, this 3-year combined reactive support option delivers onsite hardware support and over-the-phone software support around-the-clock. Leverage the full strength of HP Technology Services customers can trust the services professionals at HP to work collaboratively with them, putting our strategic and technical know-how to work across their entire infrastructure.
Improve uptime with responsive hardware and software services
Enjoy consistent service coverage across geographically dispersed sites
Update HP software at a predictable cost
Increase customer satisfaction-with no interoperability gaps http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6638EEE
For smooth startup, HP MSA Family Disk Array Installation and Startup Service -provides you with a custom-tailored deployment of the MSA Array so that it is properly integrated into your storage environment, and helps you realize the maximum benefit from your storage investment. In today's new era of business technology, technology must produce thousands of business outcomes. Today's
HP Technology Services portfolio helps customers manage their technology in action-because when technology works, business works.
Verification that any service prerequisites are met prior to installation
Delivery of the service at a mutually scheduled convenient time
Installation of HP MSA and SAN deployment according to product specification
Availability of an HP service specialist to answer basic questions during the onsite delivery of this service
Customized installation plan to support unique configuration requirements http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-3048ENW.pdf
HP Proactive Select Service improves your IT performance and manageability through the use of cost effective flexible services. HP provides technical expertise and best practices to accelerate ROI of your technology investment. Selectable proactive services span a wide range of technology and process services - a flexible way to purchase proactive services that fit your particular environment and situation.
HP Proactive Select Service is technology agnostic and purchased in addition to your choice of underlying reactive support.
Access to a list of flexible and customizable proactive service activities
Enhance customers' in-house IT team with complementary assistance from HP
Improved time to solution
Reduce business risk and project costs by accessing HP specialists
Simplify IT operational procedures by leveraging HP best practices http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 25
QuickSpecs
Service and Support, HP Care Pack, and Warranty Information
As an alternative to our recommended support level, for customers who need to improve uptime with responsive 24x7 product support:
HP Support Plus 24 helps you increase performance and availability with comprehensive, consistent hardware and software services.
Working with your IT team, HP Services engineers deliver onsite hardware support and over-the-phone software support around-theclock 365 days per year. Service coverage encompasses HP products and selected multivendor hardware and software.
In addition, this convenient HP Care Pack packaged service makes software updates available to you at substantial savings.
Choose Support Plus 24 when you need to:
Improve uptime with responsive hardware and software services available anytime
Cost-effectively obtain expert 24x7 multivendor hardware and software support
Enjoy consistent service coverage across geographically dispersed sites
Update HP and selected third-party software at a predictable cost
Take advantage of subscription savings on software updates http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6638EN.pdf
For customers who need to safely migrate Windows data within their TCP/IP networks with minimal impact to their operations:
You have a need to migrate data between Windows servers within your TCP/IP network. Or you have a need to migrate storage for your Windows servers. Or both. And you need to accomplish these migrations efficiently while minimizing risk at the same time.
HP Entry Storage Data Migration Service for Windows offers you a cost competitive and convenient way to accommodate data migration triggered by a need to refresh or consolidate storage, or to create different storage tiers. This service offers a migration cost in line with the costs of storage products in small and medium-sized storage environments. The service is delivered via a skilled
HP service specialist with special consideration for data availability, integrity, and ongoing operational performance during the transfer process.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-4734ENW.pdf
HP eSupport is a portfolio of technology-based services that assist you with managing your business environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the support portal, visit http://www.hp.com/support
HP Insight Remote Support software delivers secure remote monitoring and support for your HP Servers and Storage, 24 X 7, so you can spend less time solving problems and more time focused on your
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 26
QuickSpecs
Service and Support, HP Care Pack, and Warranty Information
business. You can have your systems remotely monitored for hardware failure using secure technology that's been proven at thousands of companies around the world. In many cases, you can avoid problems before they occur.
HP Education Services
In today's cost-conscious business environment, IT professionals, developers, consultants and users face an interesting challenge: how to keep up with the latest technologies and expand important skills while delivering profitable results on current projects. To help address this challenge, HP offers innovative training solutions that help keep you up-to-date on virtualization, server, storage, Insight Control, Citrix,
Microsoft® and open source/Linux-related topics-while spending less time away from business-critical activities.
HP Technology Services continues to be recognized for service and support excellence by customers, partners, industry organizations and publications around the world. Recent honors and award reflect our services team's dedications, technical expertise, professionalism and uncompromising commitment to customer satisfaction.
To learn more on HP ProLiant servers, HP BladeSystem servers and HP storage products, please contact your HP sales representative or HP Authorized Channel Partner. Or visit www.hp.com/services/proliant or www.hp.com/services/bladesystem or http://www.hp.com/hps/storage
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 27
QuickSpecs
Configuration Information
HP has a very successful Configure to Order program for the P2000 G3 family The P2000 G3 models and options may or may not be factory installed in a rack with add-on controllers, switches, P2000 disk enclosures and hard drives. The P2000 G3 arrays may be integrated with ProLiant servers or as standalone storage.
Orders to be shipped through the CTO process must have a minimum of two drives of the same type (SAS, SAS MDL, or SATA) ordered per controller. SAN Starter Kits are not eligible for CTO.
HP P2000 G3 FC Modular Smart Array Controller
HP P2000 G3 FC/iSCSI Combo Modular Smart Array Controller
HP P2000 G3 SAS Modular Smart Array Controller
HP P2000 G3 10GbE iSCSI Modular Smart Array Controller
HP P2000 G3 iSCSI MSA Array System Controller
HP P2000 Modular Smart Array 3.5-in Drive Bay Chassis (LFF)
HP P2000 Modular Smart Array 2.5-in Drive Bay Chassis (SFF)
HP P2000 Dual I/O LFF Drive Enclosure,
Used with single or dual controller LFF or SFF array head
HP P2000 LFF Drive Enclosure I/O Module
HP P2000 G3 FC MSA Dual Controller LFF Modular Smart Array System
HP P2000 G3 FC MSA Dual Controller SFF Modular Smart Array System
HP P2000 G3 FC/iSCSI MSA Dual Combo Controller LFF Array
HP P2000 G3 FC/iSCSI MSA Dual Combo Controller SFF Array
HP P2000 G3 SAS MSA Dual Controller LFF Modular Smart Array System
HP P2000 G3 SAS MSA Dual Controller SFF Modular Smart Array System
HP P2000 G3 10GbE iSCSI MSA Dual Controller LFF Array System
HP P2000 G3 10GbE iSCSI MSA Dual Controller SFF Array System
HP P2000 G3 iSCSI MSA Dual Controller LFF Array System
HP P2000 G3 iSCSI MSA Dual Controller SFF Array System
DA - 13551 Worldwide — Version 21 — February 13, 2012
AP836A#0D1
AP837A#0D1
AW592A#0D1
AW595A#0D1
BK829A#0D1
AP838A#0D1
AP839A#0D1
AP843A#0D1
AP844A#0D1
AP845A#0D1
AP846A#0D1
AW567A#0D1
AW568A#0D1
AW593A#0D1
AW594A#0D1
AW596A#0D1
AW597A#0D1
BK830A#0D1
BK831A#0D1
Page 28
QuickSpecs
Configuration Information
1. Power Supply 1
2. Power Supply 2
3. Fan 1
4. I/O Module A
5. I/O Module B
6. Fan 2
7. Rear UID push button
8. Enclosure LEDs
9. Power on/standby button
HP D2700 Disk Enclosure
HP 146GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard
Drive
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive information ( http://www.hp.com/products/harddiskdrives ). Using hard drives in unsupported configurations will result in voiding the warranty and could result in damage to the drive and/or loss of data.
AJ941A#0D1
507125-B21
507127-B21
581284-B21
581286-B21
619291-B21
512545-B21
512547-B21
605835-B21
507610-B21
507750-B21
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 29
QuickSpecs
Configuration Information
HP P2000 Modular Smart Array 3.5-inch Drive Bay Chassis
Controller-less chassis with twelve Large Form Factor (LFF) drive bays. Space for two controllers.
HP P2000 Modular Smart Array 2.5-inch Drive Bay Chassis
AP838A
AP839A
Controller-less chassis with twenty-four Small Form Factor (SFF) ProLiant drives bays. Space for two controllers.
There are two array-head chassis - one with twelve 3.5-inch large form factor bays, the other with twenty-four 2.5-inch small form factor drive bays. For an additional twelve drive bays purchase a P2000 3.5-inch Disk Enclosure. You may attach a total of seven
P2000 Drive Enclosures for a total of ninety-six LFF drive bays. For 25 additional SFF drive bays purchase D2700 JBOD. You may attach a total of five D2700 JBODs for a total of one hundred and forty nine SFF drive bays. Dual I/O modules JBODS support both single and dual controller arrays.
Select each option with quantities specified.
1 or 2
1 or 2
1 or 2
1 or 2
1 or 2
HP P2000 G3 MSA Fibre Channel Controller
HP P2000 G3 MSA FC/iSCSI Combo Modular Smart Array Controller
HP P2000 G3 SAS MSA Array System Controller
HP P2000 G3 10GbE iSCSI MSA Array System Controller
HP P2000 G3 iSCSI MSA Array System Controller
AP836A
AP837A
AW592A
AW595A
BK829A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 30
QuickSpecs
Configuration Information
Those situations require the use of enterprise-class SAS drives. P2000 3.5-inch drives are for use only with P2000 products.
HP P2000 300GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
HP P2000 450GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
HP P2000 600GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
AP858A
AP859A
AP860A
HP P2000 1TB 6G SAS 7.2K LFF (3.5-inch) Dual Port MDL Hard Drive
HP P2000 2TB 6G SAS 7.2K LFF (3.5 inch) DP MDL HDD
HP P2000 3TB 6G SAS 7.2K 3.5 in MDL HDD version TS230Rxxx or later
AP861A
AW555A
QK703A
HP MSA2 1TB 7.2K rpm 3.5 inch Dual-port SATA Hard Disk Drive
HP P2000 2TB 3G SATA 7.2K LFF MDL Hard Drive
HP 146GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive
( NOTE: SFF SATA drives are single ported and therefore do not have a fail-over path intrinsic to their design )
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
AJ740A
AW556A
507125-B21
507127-B21
581284-B21
581286-B21
619291-B21
512545-B21
512547-B21
507610-B21
605835-B21
507750-B21
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 31
QuickSpecs
Configuration Information
1. Power Indicator
2. Fault Indicator
3.
Unit Locator
4.
SAS In Port
5.
SAS Out Port
Use either disk enclosure with Large or Small Form Factor, single or dual controller array heads. Each ship with two .5m mini-SAS to mini-SAS cables.
HP P2000 Dual I/O 3.5-inch 12 Drive Disk Enclosure AP843A
HP D2700 Dual I/O 2.5-inch 25 Drive Disk Enclosure
HP P2000 Drive Enclosure I/O Module
AJ941A
AP844A
No cable included)
Connecting P2000 G3 FC or SAS controller to a JBOD if a longer cable is desired. Also used for attaching the
P2000 G3 SAS host ports to servers
HP Ext miniSAS to miniSAS 2m Cable 407339-B21 powered enclosures.
Power Cord, 220/240 VAC, (US/Canada/Mexico)
Power Cord, (Australia/China/New Zealand)
Power Cord, (Central Europe)
Power Cord, (United Kingdom/Hong Kong)
Power Cord, (Switzerland)
Power Cord, (Italy)
Power Cord, (Denmark)
Power Cord, (Japan)
Power Cord, (South East Asia/India)
DA - 13551 Worldwide — Version 21 — February 13, 2012
227099-001
227098-001
157215-001
157216-001
157219-001
157217-001
157218-001
139867-001
157220-001
Page 32
QuickSpecs
Configuration Information
QLogic QMH2562 8Gb FC HBA for HP c-Class BladeSystem
HP BLc Emulex LPe1205- 8Gb FC HBA for HP c-Class BladeSystem
Lpe1105-HP 4Gb FC HBA for HP c-Class BladeSystem
QMH2462 4Gb FC HBA for HP c-Class BladeSystem Windows and Linux
Brocade 804 8Gb FC HBA for HP BladeSystem c-Class, Windows, VMware, Linux
NOTE: www.hp.com/go/fchba for product details and www.hp.com/storage/spock for compatibility details.
Brocade Fibre Channel HBAs
HP 81B PCI-e FC HBA Single Port
HP 82B PCI-e FC HBA Dual Port
HP 41B 4Gb PCI-e FC HBA
HP 42B 4Gb Dual-Port PCI-e FC HBA
Emulex Fibre Channel HBAs
HP 81E PCI-e FC HBA Single Port
HP 82E PCI-e FC HBA Dual Port
HP FC2142 4Gb PCI-e HBA
HP FC2242 Dual Channel 4Gb PCI-e HBA
QLogic Fibre Channel HBAs
HP 81Q PCI-e FC HBA Single Port
HP 82Q PCI-e FC HBA Dual Port
HP FC1142 4Gb PCI-e HBA
HP FC1242 Dual Channel 4Gb PCI-e HBA
HP PCI-X 2.0 1Port 4Gb
HP PCI-X 2.0 2Port 4Gb Fibre Channel HBA
HP PCIe 2Port 4Gb Fibre Channel HBA
HP PCIe 1Port 4Gb Fibre Channel HBA
HP PCIe 2-Port 4Gb Fibre Channel HBA
HP PCIe 1-port 4Gb and 1-port 1000BT Adapter
HP PCIe 2-port 4Gb and 2-port 1000BT Adapter
HP PCIe 2-port 4Gb and 2-port 1000BSX Adapter
HP PCI-X 1-port 4Gb FC and 1-port 1000BT Adapter
HP PCI-X 2-port 4Gb FC and 2-port 1000BT Adapter
HP PCI Express 1-port 8Gb Fibre Channel SR (QLogic)
Adapter
HP PCI Express 2-port 8Gb Fibre Channel SR (QLogic)
Adapter
HP PCIe 1-port 8Gb FC SR (Emulex) HBA
DA - 13551 Worldwide — Version 21 — February 13, 2012
451871-B21
456972-B21
403621-B21
403619-B21
590647-B21
AB378B
AB379B
AD300A
AD299A
AD355A
AD221A
AD222A
AD393A
AD193A
AD194A
AH400A
A8002A
A8003A
AK344A
AJ764A
AE311A
AE312A
AP769A
AP770A
AP767A
AP768A
AJ762A
AJ763A
AH401A
AH402A
Page 33
QuickSpecs
Configuration Information
HP PCIe 2-port 8Gb FC SR (Emulex) HBA
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
Fibre Channel Switches HP 8/8 Base SAN Switch
HP 8/8 SAN Switch
HP 8/24 Base SAN Switch
HP 8/40 Base SAN Switch
HP 8/40 Power Pack+ SAN Switch
HP 8/80 Power Pack+ SAN Switch
HP 8/80 Base SAN Switch
HP 1606 Power Pack+ Extension SAN Switch
HP 1606 Full Extension SAN Switch
HP 1606 Base Extension SAN Switch
HP 2408 FCoE Base Converged Network Switch
HP 2408 FCoE Power Pack+ Converged Network Switch
Brocade 8/12c SAN Switch for HP BladeSystem c-Class
Brocade 8/24c SAN Switch for HP BladeSystem c-Class
Brocade 8/24c SAN Switch for HP BladeSystem c-Class Power Pack+
HP 8/20q Fibre Channel Switch
HP 8Gb Simple SAN Connection Kit
HP 8/20q Fibre Channel Switch
HP SN6000 Stackable 8Gb 24-port single power supply FC Switch
HP SN6000 Stackable 8Gb 24-port dual power supply FC Switch
HP SN6000 Stackable 8 Gb 12-port Single Power Fibre Channel Switch active
Cisco MDS 9124 8-ports Active Fabric Switch
Cisco MDS 9124 16-ports Active Fabric Switch
Cisco MDS 9124 24-ports Active Fabric Switch
Cisco MDS 8Gb 12-port Fabric Switch for HP BladeSystem c-Class
Cisco MDS 8Gb 24-port Fabric Switch for HP BladeSystem c-Class
Cisco MDS 9124e 12-port Fabric Switch for HP c-Class BladeSystem
AH403A
403621-B21
403619-B21
451871-B21
456972-B21
AM866A
AM867A
AM868A
AM869A
AM870A
AM872A
AM871A
AP864A
AP863A
AP862A
AP801A
AP802A
AJ820A
AJ821A
AJ822A
AQ233A
AK241A
AK242A
AW575A
AW576A
BK780A
AG646A
AG647A
AG648A
AW563A
AW564A
AG641A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 34
QuickSpecs
Configuration Information
Cisco MDS 9124e 24-port Fabric Switch for HP c-Class BladeSystem
Cisco MDS 9134 24-ports Active Fabric Switch
Cisco MDS 9134 32-ports Active Fabric Switch
Cisco MDS 9222i Fabric Switch
HP SN6000C 16-ports Active Fabric Switch
HP SN6000C 32-ports Active Fabric Switch
HP Nexus 5010 Converged Network Switch
HP Nexus 5020 Converged Network Switch
0.5m PremierFlex LC/LC Multi-Mode Optical Cable
1m PremierFlex LC/LC Multi-Mode Optical Cable
2m PremierFlex LC/LC Multi-Mode Optical Cable
5m PremierFlex LC/LC Multi-Mode Optical Cable
15m PremierFlex LC/LC Multi-Mode Optical Cable
30m PremierFlex LC/LC Multi-Mode Optical Cable
50m PremierFlex LC/LC Multi-Mode Optical Cable
LC-LC Multi-Mode OM3 Fibre Channel Cable 0.5m
LC-LC Multi-Mode OM3 Fibre Channel Cable 1m
LC-LC Multi-Mode OM3 Fibre Channel Cable 2m
LC-LC Multi-Mode OM3 Fibre Channel Cable 5m
LC-LC Multi-Mode OM3 Fibre Channel Cable 15m
LC-LC Multi-Mode OM3 Fibre Channel Cable 30m
LC-LC Multi-Mode OM3 Fibre Channel Cable 50m
OM2 LC-LC type cables 2 m LC-LC Multi-Mode Fibre Channel Cable
5 m LC-LC Multi-Mode Fibre Channel Cable
15 m LC-LC Multi-Mode Fibre Channel Cable
30 m LC-LC Multi-Mode Fibre Channel Cable
50 m LC-LC Multi-Mode Fibre Channel Cable
2 m LC-SC Multi-Mode Fibre Channel Cable
5 m LC-SC Multi-Mode Fibre Channel Cable
15 m LC-SC Multi-Mode Fibre Channel Cable
30 m LC-SC Multi-Mode Fibre Channel Cable
- verify that the cable/transceiver is supported with the connecting device (i.e. switch or NIC/iSCSI HBA)
AJ839A
221692-B21
221692-B22
221692-B23
221692-B26
221692-B27
BK843A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
221691-B21
221691-B22
221691-B23
221691-B26
AG642A
AG874A
AG875A
AG851B
AW585A
AW586A
AP775A
AP776A
BK837A
BK838A
BK839A
BK840A
BK841A
BK842A
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 35
QuickSpecs
Configuration Information
HP 0.5m SFP+ 10GbE Copper Cable
HP 1m SFP+ 10GbE Copper Cable
HP 3m SFP+ 10GbE Copper Cable
HP 5m SFP+ 10GbE Copper Cable
HP 7m SFP+ 10GbE Copper Cable
HP BladeSystem 10Gb SR SFP+
HP BladeSystem 10Gb LRM SFP+
HP ProCurve 10-GbE SFP+ 1m Direct Attach Cable
HP ProCurve 10-GbE SFP+ 3m Direct Attach Cable
HP ProCurve 10-GbE SFP+ 7m Direct Attach Cable
HP ProCurve 10-GbE SFP+ SR Transceiver
HP ProCurve 10-GbE SFP+ LRM Transceiver
HP NC522SFP Dual Port 10GbE Server Adapter
HP NC524SFP Dual Port 10GbE Module
HP NC550SFP Dual Port 10GbE Server Adapter
HP NC522m Dual Port Flex -10 10GbE Multifunction BL-c Adapter
HP NC532m 10GbE Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
Qlogic QLe4062c
HP BLc QLogic iSCSI Dual Port Adapter with Virtual Connect Kit
HP NC522m Dual Port 10GbE Multifunction BL-c Adapter
487649-B21
487652-B21
487655-B21
537963-B21
487658-B21
455883-B21
455889-B21
J9281B
J9283B
J9285B
J9150A
J9152A
468332-B21
489892-B21
581201-B21
467801-B21
467799-B21
581204-B21
Reference sell
488074-B22
467801-B21
HP SC08e 6Gb SAS HBA for rack servers
HP Smart Array P712m Controller/256 for Server Blades
HP Smart Array P711m Controller/1 for Server Blades
HP 6Gb/s SAS BL Switch - Single Pack for BladeSystems
HP 6Gb/s SAS BL Switch - Dual Pack for BladeSystems
HP Ext Mini SAS 2M cable
HP Ext Mini SAS 4m cable - (only be used when connecting a SAS HBA or 6Gb SAS switch to a SAS controller. Connecting it to disk enclosures is not supported.)
614988-B21
488348-B21
513778-B21
BK763A
BK764A
407339-B21
432238-B21
Please refer to the HP Infrastructure products page for more information on HP racks and rack options or the HP 10000 G2 Series
Rack QuickSpec.
http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.HTML
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 36
QuickSpecs
Technical Specifications
Input Power Requirements
(typical-running I/O)
SFF/LFF arrays
Max Input Power
Heat Dissipation
8G FC (2 Port - 8G FC) 110VAC 3.32A, 344-390 W; 220VAC
1.61A,374-432W
FC/iSCSI Combo (2 Port - 8G FC + 2 Port -1G iSCSI)
110VAC; 3.64A,357-418W, 220VAC 1.77 A, 365-424W
6G SAS (4 Port - 6G SAS) 110VAC 3.49A,344-390W, 220VAC 1.7A
374-432W
10GbE iSCSI (2 Port - 10 GbE iSCSI) 110VAC 3.67A, 395W,
220VAC,1.95A 388.2W
1G iSCSI (4 Port - 1GbE iSCSI) 110VAC 3.3A 363W, 220VAC,
1.63A 360W
100-240 VAC, 50/60 Hz., 4.5-1.9A; 48-60 VDC 10.4A/8.3A
1622 BTU/hr
Operating Temperature 41°F to 104°F (5°C to 40°C)
Shipping Temperature
Operating Humidity
-40°F to 158°F (-40°C to 70°C)
10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity Up to 93% RH @ 104°F (40°C)
Sound Power
Sound Pressure
A weighted sound power LWAd=6,75 B
A weighted sound pressure LpAm - 55dB
Shock, Operational
Vibration, Non-
Operational
10G's for 10 milliseconds
Shock, Non-Operational 15G 11ms half sine
Vibration, Operational 5-500Hz, 0.21Grms flat
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
Height
Depth (excluding cables)
(back of ear to back of controller handle)
Width (body only)
Chassis Weight
(no controllers)
3.5 in/ 8.9 cm
P2000 G3 SFF 24-bay array: 20.28 in / 51.510 cm
P2000 G3 LFF 12-bay array: 21.3 in. / 55.1 cm
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
P2000 LFF chassis: 34.1 lbs. (DC-pwr model: 37.9 lbs)
P2000 SFF chassis: 32.3 lbs (DC-pwr model: 36.1 lbs)
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 37
QuickSpecs
Technical Specifications
Status and activity provided via management interfaces. Status Indicators on front of Controller
0, 1, 3, 5, 6, 10, 50
2GB Read/Write. ECC protection with backup to Flash memory (indefinite backup)
ECC protection with back up to flash memory (indefinite backup)
Upgradeable Firmware yes
6 Gb SAS - Serial Attached SCSI
FC: 2 x 8Gb Fibre Channel SFP+
SAS: 4 -4x lane 6 Gb SAS Host Connections
10GbE iSCSI: 2 x 10GbE SFP+
1GbE iSCSI: 4 x 1GbE RJ45
SAS (SFF8088) 4x lane 6 Gb SAS
P2000 G3 Fibre Channel, FC/iSCSI, SAS, and 10GbE iSCSI MSA
Controllers 4.5lbs. 1GbE iSCSI is 4.89 lbs
UL 60950-1 (USA)
CAN/CSA-C22.2 No.60950-1-03 (Canada)
EN 60950-1 (European Union)
GS mark (Germany)
IEC 60950-1 (International)
CCC Mark (power supply only, China PRC)
VCCI:2008-04 Class A (Japan)
FCC 15:109(g) Class A (USA)
ICES-003:2004 Class A (Canada)
EN55022 : (European Union Class A); CISPR 22 (International Class A)
EN61000-3-2 : (Harmonics) (European Union)
EN61000-3-3 : (Flicker) (European Union)
EN 55024 (European Union, Immunity, Class A);CISPR 24 (International
Immunity, Class A)
AS/NZS CISPR 22, Class A (Australia, New Zealand)
CNS 13438 Taiwan, Class A (Taiwan)
KN22 Class A (Emissions Class A); KN24 (Immunity) (S Korea)
RoHS-6/6 Compliance, China RoHS, WEEE
United States ,Australia/New Zealand, Canada, China (PRC), European
Union, Germany (GS Mark), Japan, South Korea, Taiwan
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 38
QuickSpecs
Technical Specifications
© Copyright 2012 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation. Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13551 Worldwide — Version 21 — February 13, 2012 Page 39
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project