Product Specification i i Enterprise 2.5” SATA 6Gbps SSD – E2 Series The Best SSD Solution for Data Centers 240 For Read Intensive applications INTRODUCTION The Integral Enterprise Class SATA 6Gbps SSD delivers all of the advantages of flash memory technology for ultimate performance and reliability. The superior solution for data centre, ideal for read intensive and performance hungry applications; including Video on Demand, streaming, Web server, file server and operating system boot. GB 480 GB 960 GB write cache of the SSD is protected against corruption if a power loss was to occur, enabling the SSD to complete the last write command to the NAND flash. FEATURES • 2.5” form factor with SATA III 6Gbps interface (backwards compatible with SATA 3Gbps and SATA 1.5Gbps) • Designed for Datacenter Read Intensive applications • Higher performance storage • Reduced latencies It should not be assumed that Solid State Drives are a drop-in replacement for Hard Disk Drives when used in servers and data centre environments. The data writing behaviour of the application and the amount of data to be written on the device is vital to making the best choice for your needs. The performance, latency and bandwidth of the SSD also need to be considered. • Sustained write IOPS To make the correct choice for your data centre, when selecting an Enterprise Class SSD it is critical to know the following: • Non-volatile Flash Memory for outstanding retention - Less likely to fail than HDD 1. Application (e.g. email server, file server, video-on demand, OLTP, webserver) 2. An estimate of how much data will be written to the drive per day, so you can work out the right drive capacity required. Integral have Enterprise SSD solutions for Mixed Workloads and Read Intensive applications. The E2 is designed for Read Intensive applications. • The Enterprise SSD features consistently low latency with a superior level of sustained write IOPS, together with power-loss protection. The SSD hardware is built with a number of capacitors that ensure that the data in the Rev:1 • Lower Power Consumption • Random Read IOPS upto 90K • TBW - Best sequential 2780TB / Worst random 665TB (960GB) • Drive Writes per Day - 0.6 @ 3 years data • Shock resistance - No moving parts enable the product to be used in tougher conditions • Silent operation - Noiseless and low heat dissipation • Much less heat generated than conventional HDD • Supports S.M.A.R.T. - Self-Monitoring, Analysis and Reporting Technology • CE and FCC compliant • 3 Year Warranty or TBW Product Specification i i 2.5 Inch (7mm) CAPACITIES AVAILABLE 240GB, 480GB, 960GB Form Factor 2.5 Inch (7mm) Interface SATA III 6Gbps (also Compatible with SATA II 3Gbps) Fully complies with ATA/ATAPI-7 Standard Support NCQ : Up to 32 depth DIMENSIONS CAPACITY PART CODE BARCODE (EAN) 240GB INSSD240GS625M7XE2 5055288428713 480GB INSSD480GS625M7XE2 5055288428720 960GB INSSD960GS625M7XE2 5055288428737 - Performance measured using IOMeter 2006 with queue depth 32 - Measurements are performed on whole LBA range - Write cache enabled - 1MB/sec = 1,048,576 bytes/sec was used in sequential performance Length 100.20mm Width 69.85mm 1. Actual performance may vary and depends on use conditions, host and environment Height 6.80mm 3. Active Write power is measured on 128KB sequential write with 480GB density Weight 63g Packaged Weight 108g Packaged Dimensions (mm) L = 11.5 x W = 13.2 x H = 5.7 Sequential Performance up to1 240GB: Read: 530MB/s Write: 270MB/s 480GB: Read: 530MB/s Write: 410MB/s 960GB: Read: 530MB/s Write: 410MB/s Random Performance (Sustained)1 240GB: Read 87K IOPS, Write 12K IOPS 480GB: Read 87K IOPS, Write 13K IOPS 960GB: Read 87K IOPS, Write 15K IOPS IOPS Consistency (Random) 4KB5 Read 95%, Write 90% Latency6 240GB Read: 115us, Write: 65us 480GB Read: 115us, Write: 55us 960GB Read: 110us, Write: 50us ENVIRONMENTAL Operating Temp 0 to 70 C Storage Temp -55 to 95 C Humidity 5% to 95%, non-condensing Supply Voltage 5V Power Consumption (Watt) Active Read: 2.6W2 Active Write: 3.4W3 Idle: 1.1W4 Shock 1500G, duration 0.5ms, Half Sine Wave Vibration 7~800Hz, 3.08Grms, 30min/ axis(X, Y, Z) Supports SMART Yes MTBF 1.5 Million Hours TBW 240GB: Best sequential 695TB / Worst random 165TB 480GB: Best sequential 1390TB / Worst random 330TB 960GB: Best sequential 2780TB / Worst random 665TB Drive WPD 0.6 @ 3 years Warranty 3 years or TBW Compliancy CE, FCC Rev:1 2. Active Read power measured on 4KB random read with 480GB density 4. Idle power is measured on 480GB density with DIPM off 5. IOPS consistency measured using FIO with queue depth 32. IOPS consistency % = (99.9% IOPS)/(Average IOPS) x 100 6. Latency is measured using FIO with queue depth 1 on 4KB random read and write
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021