Pantera DP1100i T4
SURFACE DRILLS
TECHNICAL SPECIFICATION
Sandvik Pantera DP1100i is intelligent, self-propelled, self-contained, crawler based surface drilling rig equipped with a cabin and a rod changer.
Sandvik Pantera DP1100i with practical intelligence fits perfectly for production drilling in large quarries or open pit mines and construction work sites. It suits well also for wall control and development works. To customize the rig it can be equipped with a variety of options to meet special requirements.
KEY FEATURES
Hole diameter:
Rock tools:
Rock Drill
Engine output:
Flushing air:
Production capacity:
Total weight :
89 - 140 mm (3 ½” - 5½”)
51 and 60 mm (2” and 2 3/8”) rods
25 kW
224 kW (Tier 4 Final)
11 m3/min, up to 10 bar(depends on used rock tools)
1,5 Mt/year
22 900 kg
1. TECHNICAL SPECIFICATION – Pantera DP1100i T4 - 1 –2016-05-18
HYDRAULIC ROCK DRILL
Rock drill
Rock tools
Operating pressure
Percussion rate
Percussion output power
Maximum rotation torque
Shank lubrication
Flushing
Weight
FEED
Feed type
Total length
Rock drill travel
Max. length of starter rod
Hose reel
Feed extension travel
Feed/pull out force
Feed swing
Feed tilt
ROD CHANGER
Rod changer type
Storage capacity
Rod length
Max. hole depth
BOOM
Boom type
Boom extension
Collaring height
Horizontal holes
CABIN
Cabin type
Certificates
Noise level in the cabin
Air conditioning
Pressurization
Seat
Vibration dampening
Windows
HL 1060T / RD1635CF
(optional)
51, 60 mm
90 - 160 bar
33 - 38 Hz
25 / 35 kW
1 780 / 2050 Nm
Air / oil mist
Air
450 kg
LF 1514 HR with hose reel
9 154 mm
4 980 mm
(18')
Standard
1 480 mm
36 kN
-56/+52° (-20/+94°)
13-135°
RC 1614
7+1 (51 and 60 mm rods)
6+1 (87 mm tubes)
3 660, 4 270 mm
33 m (7+1) x 14’
ZB 1550 H, telescopic
500 mm
+1.24 /-4.1 m
To the right hand side
Ergo cool
F.O.P.S. and R.O.P.S.
80 dB (A)
Standard
Standard
Ergonomic, adjustable
Standard
Safety laminated, tinted selective glass with wiper
2. TECHNICAL SPECIFICATION – Pantera DP1100i T4 - 1 –2016-05-18
POWERPACK
Engine type
DEF tank
Number of cylinders
Engine output
Transmission type
Screw compressor type
Air filters
Fuel tank
HYDRAULIC SYSTEM
Number of gear pumps
Number of piston pumps
Filtration rate
Cooling capacity
Hydraulic oil tank
Shank lubrication device
CONTROL SYSTEM
Control system type
Tramming/boom/ drilling control
User interface
Control system diagnostics
Drilling control system type
Antijamming system
Collaring control
Preset drilling parameters
Voltage
DUST COLLECTOR
Dust collector type
Capacity/vacuum
Filter elements/material
Total filter surface
Primary cyclone
Movable suction head
CARRIER
Track type
Grouser plate width
Ground contact length
Ground pressure
Ground clearance
Oscillation angles
Tramming force
Max. tramming speed
Caterpillar C 9.3(Tier 4F)
AdBlue, 42 l
6
224 kW/1800 rpm
Gear box
Enduro 25
2 pcs, dry type with ejector and safety element
680 l
3 pcs. for dust collector and cooling
2 pcs. for drilling, tramming, boom and rodhandling
12 micron abs. up to +50°C ambient
390 l
SLU 50
Sandvik SICA, PLC controlled proportional electro- hydraulics
PLC controlled
Electro-proportional joysticks and touchscreen
Graphical flow chart type iTorque
For rotation and flushing
Automatic
Adjustable for fine tuning for different rock conditions
24 VDC
DC 1550
35 m³/min at 1 200 mm vacuum H2O
20 pcs / fiber
16 m²
PE 80
MS 250
FL 6
400 mm
2510 mm
1.1 kg/cm²
360 mm
+/- 11°
150 kN
1.8/3.2 km/h
STANDARD COMPONENTS
Rock drill HL 1060T, hydraulic
Feed LF 1514 HR
Safety cage
Hose reel, drum type
Rod changer RC 1614
Boom ZB 1550 H, telescopic
Carrier FL 6, oscillating
Powerpack, diesel driven, hydraulic pumps and onboard compressor
Hydraulic system, load sensing
Operator's cabin Ergo Cool with AC
Dust collection system DC 1550 H, hydraulic
Working lights 15 pcs (9 forward)
Reversing alarm
TIMi for vertical holes and depth measuring
Movable drill steel support
Suction shut down for water holes
Flushing control automatics
EU-safety devices
Gauge set for accumulator pressure checking
1 Set Manuals, paper copy
1 Set Manuals, CD rom
THE JAWS FOR DRILL STEELS
DRILL STEEL TYPE DRILL STEEL
DIAMETER
Extension rods /
MF rods
MF-rods
51 mm 2"
60 mm 2 3/8"
Pilot tube
Pilot tube
76 mm 3"
87 mm 3 ½"
RECOMMENDED
HOLE DIAMETER
89 -127 mm 3 ½" -
5"
102 - 140 mm 4" - 5
½"
89 - 127 mm 3 ½" -
5"
102 - 140 mm 4" - 5
½"
SELECTION OF OPTIONS
Cooler bag in cabin
Radio with CD-MP3 player
Reversing camera
Roller blinds for cabin windows
Vacuum cleaner for cabin
Automatic feed alignment for TIMi
GPS aiming device for TIM and TIMi inclined holes
TIM3D hole navigation system
TIMi for inclined holes and hole depth measuring
TIMi laser level based depth measuring
Feed support for soft ground
Horizontal drilling kit
Kit for alternative steels, each
LF 1522 feed with hose reel ( max starter rod 20 ft )
Rollers for rod changer
Thread greasing
Thread greasing with 5 gallon bucket
Tube drilling kit
One hole automatic drilling down to preset depth
Power extractor
Readyness for Power Extractor
RD1635CF and CSL system. Replaces standard components
Anti- freeze system for air lines
Biogradeable hydraulic oil
Central lubrication system Sandvik
Electric fuel filling pump
Electric hydraulic oil filling pump
Electric water filling pump
Fast fill connection for engine coolant, hydraulic and engine oils
Fast fill connection for fuel and water tanks
Guides for grousers
Hydraulic rear ground support
Hydraulic winch with radio remote and cable tightness automatics
Single bar grouser plates
Towing hook
Xenon lights, 9 pcs
Ether starting aid for engine without ether bottle
Fuel powered heater for engine and cabin
Fuel powered heater for engine, cabin and water tank
Readyness for fuel powered heater
Dustmizer requires flap feeder (engine heater option needed below freezing point)
Flap feeder for dust collector
Sampling device
Water injection system
Grinder Sandvik RG420H
Extra manuals, price will be added according to pricing sheet
First service kit for DP1100i
Special tools for HL 1060T , field kit
Special tools for HL 1060T, complete
Service agreement - select level from extra item
SanRemo - select level from extra item
3. TECHNICAL SPECIFICATION – Pantera DP1100i T4 - 1 –2016-05-18
COVERAGE AREA AND DIMENSIONS
DIMENSIONS
Weight
Width
Height
22 900 kg
2.5 m
3.28 m/3.34 m
Total length 11.5 / 11.1 m
Sandvik Construction reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options.
CONSTRUCTION.SANDVIK.COM
4. TECHNICAL SPECIFICATION – Pantera DP1100i T4 - 1 –2016-05-18
