Wood Mill/Resaw Blades
THE M. K. MORSE COMPANY
Table of Contents
M. K. Morse Company Overview
2
Band Saw Products Overview
3
Carbide Tipped Blades
M-Factor by Morse® Carbide Tipped
4
Bi-Metal Blades
Independence II®
5
Independence EXS®
5
Independence® Wide Bands
5
The Morse Achiever™
6
Challenger™
7
M42
8
Matrix II
9
Die Bands: M42 & Matrix II
10
Quik Silver® Pallet Dismantling Blades 11
Quik Silver® Carbon Blades
Carbon General Purpose
12
Wood Production & General Purpose 13
Furniture Blades
14
Wood Mill & Resaw Blades
15
Tungsten Carbide Grit Blades
Carbide Grit Continuous & Gulleted
16
General Information
Band Saw Tension Gauge
17
Blade Break-In Procedure
17
Cutting Tool Safety
17
Band Saw Blade Part Number Chart
18
M. K. Morse Warranty
19
Guaranteed Trial Blade Offer
19
Technical Information
Band Saw Blade Terminology
20
Tooth Set Specifications
21
Tooth Pitch Specifications
22
Tooth Selection Guide
23
Blade Speed/Removal Rate Guide
24
Cut Time Calculator
26
Minimum Radius Per Blade Width
27
Chip Condition Reference Guide
27
Problem Solving Reference 28
Information
Blade Usage Notes Page
30
Blade Recommendation Checklist
31
Mailing & Shipping Addresses Back Cover
At The M. K. Morse Company we’ve had just one focus for over forty-five­
years. Make better saw blades and accessories and get them to customers on time. We don’t make machinery. We don’t make other products.
We do one thing and we do it very well.
This single-minded devotion has led to some unique innovations over the
years. But, mostly it has led to a relentless march to improve value.
We are constantly looking for ways to build even more durability into our
blades while driving production costs down. The result is a line of high
value industrial band saw blades that top the charts in performance
and quality.
We have accomplished this by totally integrating our manufacturing
process. In fact, we do everything but make our own steel ... so far. This
unique ability to control our processes makes it easier for us to meet tight
production deadlines and control costs. Our customers get the benefits.
At M. K. Morse this is the way we operate.
There really was an M. Kenneth Morse. As a manufacturer’s rep, he became frustrated when he sold
products manufacturers couldn’t deliver on time
or with the quality his customers demanded. He
started manufacturing saw blades to make sure
his customers got what they wanted when they
needed it. We still do business the same way
today, using the talents and resources of people
working in manufacturing and warehousing facilities around the world. They are M. K. Morse, today.
We’re still headquartered where we started ... in Canton, Ohio, U.S.A.
However, today we have warehousing in Los Angeles, California;
Vancouver, Canada; Toronto, Canada; West Yorkshire, England; Helsinki,
Finland; and Palghar, India. The Los Angeles, Toronto, West Yorkshire, and
Palgar warehouses are also weld centers. Our products are available from
industrial supply distributors world-wide.
Our reputation for immediate availability at all distribution facilities
and timely shipment is based on solid facts. Over 98% of all orders for
standard stock products ship complete within 24 hours. Our integrated
manufacturing process, dedication to customer service and worldwide
distribution make it all possible. Our customers make it all worthwhile.
• Guaranteed shipping dates
• Guaranteed quality
• Guaranteed trial blades
See page 19 for all Guarantee information.
2
Visit us at mkmorse.com
Visit the Morse BladeWizard
on-line to select the right
blade for your application:
bladewizard.com
OMPANYBAND PRODUCTS OVERVIEW
This page provides a general overview of the types of M. K. Morse
band saw blades best suited to different cutting applications.
MORSE BI-METAL BAND SAW BLADE APPLICATION OVERVIEW
Selection Based Upon Target Application
CARBON
STEELS
STRUCTURAL
STEELS
ALUMINUM &
LT. ALLOY STEELS
ALLOY STEELS
MOLD STEELS
TOOL
STEELS
STAINLESS
STEELS
NICKEL BASE
ALLOYS
TITANIUM
ALLOYS
AISI
1010, 1020,
1045
A36
6061, 2011
2024, 5052
4140, P20
A2, H13, S7
M-SERIES
316, 304
17-4 PH, 15-5 PH
INCONEL, MONEL,
WASPALLOY
T1-6Al-4V
JIS
S20C, S4SC
6061, 2011,
2024, 5052
SCM 440(H),
SCM 445(H)
SHD11, SHD12,
SKD61, SKS41
SUS316,
SUS304
NCuP-O
H4650,
H4600
DIN
CK45, C16.8
AICUPB, AICUMG2,
AIMGMN0.3
41CRMO4
X155CRVMOV51
(G)X40CRMOV51
X5CRNIMO18 10,
X5CRNI18 10
NICR19NBMO,
NICR19CO14MO4TI,
MATRIX
M42
THE MORSE ACHIEVER
TM
CHALLENGER
INDEPENDENCE II
INDEPENDENCE EXS
®
®
MORSE CARBIDE TIPPED BAND SAW BLADE APPLICATIONS
Selection Based Upon Target Application
CARBON
STEELS
ALUMINUM &
LT. ALLOY STEELS
ALLOY STEELS
MOLD STEELS
TOOL
STEELS
STAINLESS
STEELS
NICKEL BASE
ALLOYS
TITANIUM
ALLOYS
AISI
1010, 1020,
1045
6061, 2011
2024, 5052
4140, P20
A2, H13, S7
M-SERIES
316, 304
17-4 PH, 15-5 PH
INCONEL, MONEL,
WASPALLOY
T1-6Al-4V
JIS
S20C, S4SC
6061, 2011,
2024, 5052
SCM 440(H),
SCM 445(H)
SHD11, SHD12,
SKD61, SKS41
SUS316,
SUS304
NCuP-O
H4650,
H4600
DIN
CK45, C16.8
AICUPB,
AICUMG2,
AIMGMN0.3
41CRMO4
X155CRVMOV51
(G)X40CRMOV51
X5CRNIMO18 10,
X5CRNI18 10
NICR19NBMO,
NICR19CO14MO4TI,
M-FACTOR BY MORSE – GP
M-FACTOR – EXOTIC
®
CASE
HARDENED
M-FACTOR
CH
ALUMINUM
CASTINGS
ABRASIVE
WOODS
COMPOSITES
GRAPHITE
M-FACTOR – FB
MORSE CARBIDE GRIT BAND SAW BLADE APPLICATIONS
Selection Based Upon Target Application
CAST IRON
HARDENED STEEL
CERAMICS
FOAMED GLASS
FIBERGLASS
CABLE
WIRE ROPE
CEMENT
CONCRETE
TIRES & WIRE
REINFORCED RUBBER
GRAPHITE
COMPOSITES
CARBIDE GRIT
MORSE QUIK SILVER® CARBON BAND SAW BLADE APPLICATIONS
Selection Based Upon Target Application
PRODUCTION
WOOD CUTTING
WOOD CUTTING
CARBON STEELS
LOW ALLOY STEELS
NON-FERROUS METALS
NON-METALIC
MATERIALS/PLASTIC
QUIK SILVER® HARD EDGE HARD BACK / HARD EDGE FLEX BACK
3
CARBIDE TIPPED BLADES
M-Factor by Morse® EX (Exotics)
Specially designed for alloy steel and stainless steel applications
for exceptional long life.
M-Factor by Morse – EX Exotics
Width x Thickness
Applications
• Difficult alloy steels
• All stainless steels
• Inconel
• Hastelloy
USERS
• Steel service centers
• Forging operations
• General manufacturing
Inches
1-1/4 x .042
1-1/2 x .050
2 x .050
2 x .063
2-5/8 x .063
3 x .063
Teeth Per Inch
mm
.75/1 1.5/2 2/3
34 x 1.07
41 x 1.30
54 x 1.30
54 x 1.60
67 x 1.60 t
80 x 1.60 t
t
t
t
t
t
t
t
t
t
t
3/4
t
t
M-Factor by Morse® GP (General Purpose)
Specially designed for alloy steel and stainless steel applications for
exceptional long life.
M-Factor by Morse – GP General Purpose
Applications
• Alloy steels
• Stainless steels
(lower grades)
USERS
• Steel service centers
• Forging operations
• General manufacturing
Width x Thickness
Inches
1 x .035
1-1/4 x .042
1-1/2 x .050
2 x .063
2-5/8 x .063
3 x .063
Teeth Per Inch
mm
.75/1 1.5/2 2/3
27 x 0.90
34 x 1.07 t
41 x 1.30
54 x 1.60 t
67 x 1.60 t
80 x 1.60 t
t
t
t
t
t
t
t
t
t
3/4
t
t
t
M-Factor by Morse® CH (Case Hardened)
Designed for long life and fast, smooth cutting of chrome plated,
case hardened hydraulic shaft specifications.
Applications
• Hydraulic shafts
• Case hardened
shafts & shapes
• Heat treated
thick wall tubing
USERS
• Steel service centers
• Automotive parts makers
• Cylinder Manufacturers
• Bearing Manufacturers
M-Factor by Morse – CH Case Hardened
Width x Thickness
Inches
1 x .035
1-1/4 x .042
1-1/2 x .050
2 x .063
Teeth Per Inch
mm
27 x 0.90
34 x 1.07
41 x 1.30
54 x 1.60
1.5/2
2/3
3
3/4
t
t
t
t
t
t
t
t
t
t
t
M-Factor by Morse® FB (Foundry Band)
Specially designed for exceptional long life and fast cutting of
abrasive and non-ferrous materials.
4
Applications
• Aluminum castings:
gates, risers,
extrusions
• Abrasive woods
plywood
USERS
• Aluminum foundries
• Graphite manufacture
• Furniture makers
M-Factor by Morse – FB Aluminum Foundry
Width x Thickness
Inches
mm
1/2 x .025
3/4 x .035
1 x .035
1-1/4 x .042
12.7 x 0.60
19 x 0.90
27 x 0.90
34 x 1.07
Teeth Per Inch
3
t
t
t
t
BI-METAL BLADES
Independence II® High Production Bi-Metal Blades
Highly fatigue resistant to eliminate premature breakage. Excellent in solid tool steels
and small to medium stainless & nickel based alloys.
BLADE FEATURES
• Special high speed steel tooth edges
• Special alloy steel backer
• Unique tooth geometry
• Superior wear, heat and shock resistance
• Fewer blade changes in a wide range of materials
equals less downtime
Width x Thickness
Inches
1 x .035
1-1/4 x .042
1-1/2 x .050
2 x .063
Teeth Per Inch
mm
2/3
3/4
4/6
5/7
27 x .90
34 x 1.07
41 x 1.27
54 x 1.60
t
t
t
t
Variable
t
t
t
t
t
t
t
t
t
t
t
t
Applications
• High production cutting
• Solids of tool steel
A2, D2, S7
• Small to medium solids of
stainless (304, 316, 17-4)
• Nickel based alloys
Inconel, Monel
• All machinable metals in
single pieces or bundles
Independence EXS® High Production Bi-Metal Blades
Longer lasting than competitive blades and more wear resistant than The Morse Achiever™,
and M42, these blades are the best choice for cutting exotics, stainless steels and large solids.
Applications
• High production cutting
• Large solids
• Stainless steels
• Exotics
Width x Thickness
Inches
1 x .035
1-1/4 x .042
1-1/2 x .050
2 x .063
mm
1/1.5
27 x .90
34 x 1.07
41 x 1.27
54 x 1.60
t
t
Teeth Per Inch
2/3
3/4
Variable
t
t
t
t
t
t
t
t
4/6
t
t
5
BI-METAL BLADES
The Morse Achiever™
Production Bi-Metal Blades
Consistently reliable with excellent durability in mild to difficult
materials – layer & bundle cuts and large profiles & solids.
Applications
• Production cutting
• Material range from
carbon to stainless steel
•
Layer & bundle cuts:
1018, 4140, 4340
tool steels
stainless steels
•
Large profiles & solids
carbon steels
alloy tool steel
stainless steel
BLADE FEATURES
• Best performance in a wide range of materials
• M. K. Morse proprietary edge wire
• M. K. Morse engineered spring steel backer - additional rigidity
• Consistent reliability / performance from blade to blade
• Exceptional tooth durability and fatigue resistance
The Morse Achiever™
Width x Thickness
Inches
1 x .035
1-1/4 x .042
1-1/2 x .050
1 x .035
1-1/4 x .042
1-1/2 x .050
2 x .063
2-5/8 x .063
3 x .063
t Heavy Set
6
mm
Teeth Per Inch
.75/1.11.1/1.51.5/2.01.4/2.5 2/3
3/4
4/6
5/7
Variable Pitch - 0º Rake
27 x .90
t 34 x 1.07
t
t
41 x 1.27
t
t
Variable Pitch - Positive Rake
27 x .90 t tt tt
t
34 x 1.07
t
t
tt ttt t
41 x 1.27
t
tt tttttt
54 x 1.60
t
tt tt
67 x 1.60
t
t
t t
t
80 x 1.60
t
t
t
t Available in 6º Positive Rake
5/8
6/10 8/12 10/14
t
t
t
t
t
BI-METAL BLADES
Challenger™ Bi-Metal
Structural Blades
Long life and straight cuts in structural material cutting
applications while reducing noise and vibration.
Applications
• Specially designed for
structural applications
BLADE FEATURES
• Special tooth profile for cutting structural materials
• Increased beam strength
• Less noise and vibration
• Less tooth strippage
• Longer life in interrupted cuts
• Straighter interrupted and bundle cuts
•
•
•
•
•
Bundle cuts
Interrupted cuts
I-beams
Low alloy steels
Carbon steels
A36
Challenger™ Blades
Width x Thickness
Inches
3/4 x .035
1 x .035
1-1/4 x .042
1-1/2 x .050
2 x .063
2-5/8 x .063
t Heavy Set
Teeth Per Inch
mm 2/3 3/4 4/6 5/7 8/11
19 x .90 27 x .90
t
32 x 1.1 tt
tt
tt
41 x 1.3 tt
tt
tt
54 x 1.6 tt
tt
tt
67 x 1.6 tt
tt tt
t
t
t
t
t
t
t
t
7
BI-METAL BLADES
M42 Production Bi-Metal Blades
Durability for higher production speeds on difficult to machine
solids and heavy walled structures
Applications
• Solids
• Heavy walled structures
• Carbon steels
• Alloy steels
• Some stainless steels
• Medium to heavy
production machines
Variable Pitch - Positive Rake
Width x Thickness
Inches
mm
Teeth Per Inch
1.4/2.52/33/44/65/7
Variable
3/4 x .035
19 x .90
t
t
1 x .035
27 x .90
t
tt
tt
t
1-1/4 x .042 34 x 1.07
t
tt
tt
t
1-1/2 x .050 41 x 1.27
t
t
tt
tt
2 x .050 54 x 1.27
t
t
2 x .063 54 x 1.60
t
t
t
t Available with 6º rake angle
Variable Pitch - 0˚ Rake
Width x Thickness
Inchesmm
2/3
3/4
Teeth Per Inch
4/6
5/8
6/10
8/12
10/14
Variable
1/4 x .025 6.4 x .64t
1/4 x .035 6.4 x .90
t
3/8 x .035 9.5 x .90
t
1/2 x .025 12.7 x .64
t
1/2 x .035 12.7 x .90
t
3/4 x .035
19 x .90
t
t
t
t
t
1 x .035
27 x .90 t
t
t
t
t
t
t
1-1/4 x .042 34 x 1.07 t
t
t
t
t
1-1/2 x .050 41 x 1.27 t
t
t
t
Straight Pitch
Width x Thickness
Teeth Per Inch
Inchesmm 4681014101
1.142346
Raker
Wavy Hook
1/4 x .035 6.4 x .90
t t
3/8 x .035 9.5 x .90
t
1/2 x .025 12.7 x .64
1/2 x .035 12.7 x .90
t t
3/4 x .035
19 x .90 t
1 x .035
27 x .90 t t t
tt t
1-1/4 x .042 34 x 1.07 t t t t t
1-1/2 x .050
41 x 1.27t
2 x .050 54 x 1.27
t
2 x .063 54 x 1.60
t
Straight Pitch teeth are most often used when the cross sectional size range is consistent.
8
t
t
t
t
t
BI-METAL BLADES
Matrix II General Purpose Bi-Metal Blades
General purpose blades ideal for cutting materials with easy to
moderate machinability. Matrix II bi-metal band saw blades offer
good value in maintenance shops and small fabricating shops.
Variable Pitch-Positive Rake
Width x Thickness
Teeth Per Inch
Inches
mm 2/3 3/4 4/6
Variable
3/4 x .035
19 x .90
t
t
1 x .035
27 x .90
t
tt
1-1/4 x .042 34 x 1.07
t
t
1-1/2 x .050 41 x 1.27
t
t
t
• Interrupted cuts of:
Pipe & tubing
Angle & channel
t Heavy Set
Variable Pitch - 0˚ Rake
Width x Thickness
Inches
mm
Teeth Per Inch
4/6
5/8 6/10 8/12 10/14 14/18 20/24
Variable
1/4 x .025 6.4 x .64
t
3/8 x .025 9.5 x .64
t
1/2 x .020 12.7 x .50
t
t
t
1/2 x .025 12.7 x .64
t
t
t
t
1/2 x .035 12.7 x .90
t
t
5/8 x .035
16 x .90
t
tt
3/4 x .035
19 x .90
t
t
t
1 x .035
27 x .90
t
t
t
t
t
1-1/4 x .042 34 x 1.07
t
t
1-1/2 x .050 41 x 1.27
t
Variable Pitch teeth can handle a wider range of application sizes and reduce sawing
harmonics for quieter, reduced vibration cutting.
Specifications - Straight Pitch
Width x Thickness
Inches
mm
Teeth Per Inch
681012
141814
1824
1.14
346
Raker
1/4 x .025 6.4 x .64 t t
3/8 x .025 9.5 x .64 t t t
1/2 x .020 12.7 x .50 t 1/2 x .025 12.7 x .64 ttt
1/2 x .035 12.7 x .90 3/4 x .035
19 x .90 t t t t t
1 x .035
27 x .90 t t t t
1-1/4 x .042 34 x 1.07 t Wavy
t t t t
t Applications
• Carbon steels
• Structural steels – A36
Single piece
Bundles
Stacked pieces
• Small & medium band saw machines
BLADE FEATURES
• Variable pitch teeth handle a wide range of application sizes
• Good general purpose
metal cutting blade
• Reduced sawing
harmonics – quieter,
less vibration
• Moderate cost-per-blade
low cost-per-cut
Hook
t
t t t
t
t
t
t
Straight Pitch teeth are most often used when the cross sectional size range is consistent.
9
BI-METAL BLADES
Bi-Metal Die Band Blades
Applications
• Tool & die shops
• Die blocks
• Tool steels
• “D” grade steels
• “Super” alloys
• Inconel
• Waspalloy
• Hastelloy
• Tough materials
• Typically used on
vertical machines
Designed for cutting solids with very low machinability
including the toughest machinable materials. Production
cutting with less blade changes for tool and die shops.
BLADE FEATURES
• Low cost-per-cut
• High heat and wear resistance
• Available in Matrix II and M42 specifications
• Wide selection of blade type and tooth sizes
• Made with either straight pitch or variable pitch teeth
• Matrix II die bands, with high shock resistance, are better suited for thinner sections
• M42 die bands offer high wear and heat resistance and are best suited for cutting difficult-to-machine tool steel and die blocks
M42 Specifications
Width x Thickness
Inches
mm)
Teeth Per Inch
10
14
4
8/12 10/14
6
Raker Hook Variable
6.4 x .64
t
6.4 x .90 t tt
9.5 x .90 t tt
12.7 x .64
t
t
12.7 x .90 t t
t tt
1/4 x .025
1/4 x .035
3/8 x .035
1/2 x .025
1/2 x .035
Matrix II Specifications
Width x Thickness
Inches
Teeth Per Inch
mm
6
10
8
10
Raker
14
18
3
4
Hook 6
6/10
8/12
10/14
14/18
Variable
1/4 x .025 6.4 x .64
t
tt
3/8 x .025 9.5 x .64
t
t
tt t
1/2 x .025 12.7 x .64
tt
t
t
t
tt
t
t
t
1/2 x .035 12.7 x .90
t
tt
BI-METAL BLADES
Quik Silver® Pallet Dismantling Blades
Specially designed to withstand the rough service
required on dismantling machines while cutting
through pallet nails and staples.
BLADE FEATURES
• Low cost-per-cut
• Rugged durability
• Available in bi-metal Matrix II and M42 specifications as well as a special grade of carbon steel
• Made with either straight pitch or variable pitch teeth
Applications
• All types of band saw
pallet dismantling
machines
M42 Bi-Metal
Width x Thickness
Inches
Teeth Per Inch
mm 6/10 5/8 6
Variable Raker
1-1/4 x .042
32 x 1.1
t
t
Matrix II Bi-Metal
Width x Thickness
Inches
Teeth Per Inch
mm 6/10 5/8 6
1-1/4 x .042
32 x 1.1
Variable Raker
t
t
t
Lower cost blades are available in a special
grade of carbon steel to enhance their durability in a variety of dismantling machines.
Carbon Hard Back (HB) Special
Width x Thickness
Inches
Teeth Per Inch
mm 6/10 5/8 6
1-1/4 x .042
32 x 1.1
Variable Raker
t
t
11
QUIK SILVER ® CARBON BLADES
Quik Silver® (HB) Hardback Blades
Applications
• Low alloy, easy-to machine ferrous metals
• Non-ferrous metals:
Brass/copper
Bronze
Aluminum
Lead
• Wood
• Plastic
• Cork
• Composition board
• Plywood
Stiffer blades offer straighter cuts in wood & metal
cutting. On metals they are used for short production
and maintenance applications
BLADE FEATURES
• Manufactured from a single piece of high carbon steel with
individually hardened tooth tips
• Low cost-per-blade/low cost-per-cut in wood & similar materials
• In metals; low cost-per-blade/higher cost-per-cut than bi-metal
• Stiffer than hard edge flex (HEF) blades due to a hardened &
tempered backer
• Straighter cuts with heavier feed pressure than carbon HEF
• Will accept heavier feed pressure than carbon HEF
• Good on easy-to-machine metals and other easy-to-cut materials
• Not recommended for blade speeds exceeding 4000 sfm
Specifications
Width x Thickness
Inches
3/16 x .025
1/4 x .025
3/8 x .025
1/2 x .020
1/2 x .025
5/8 x .032
3/4 x .032
1 x .035
1 x .042
1 1/4 x .035
1 1/4 x .042
mm
6 8 101418241012141824321.3 2 3 4 6 3 4 6
Raker
Wavy
Hook
Skip
4.8 x .64 t
6.4 x .64 t t t t tt tt t
9.5 x .64 t t t t t t t t t
12.7 x .50
t 12.7 x .64 t t t t t t tt t tt t tt
16 x .80 t t t t 19 x .80 t t t t tt t t ttt t t t t
27 x .90 t t t t t t t t 27 x 1.1 t
32 x .90 t
32 x 1.1 tt
t Standard Set t Heavy Set t D-Double Set Raker
12
Teeth Per Inch
QUIK SILVER ® CARBON BLADES
Quik Silver® (HEF) Flexback Blades
Ideal for wood production cutting and short production/
maintenance/general purpose applications using low
alloy steel & non-ferrous metals
BLADE FEATURES
• Manufactured from a single piece of high carbon steel
with individually hardened tooth tips
• More fatigue resistant than Carbon hard back
• Low cost-per-blade/low cost-per-cut in wood
• Low cost-per-blade/higher cost-per-cut in
tougher materials
• Can be run at speeds up to 15,000 sfm
Applications
• Wood
• Plastic
• Cork
• Composition board
• Plywood
• Aluminum
• Non-ferrous metals
• Low alloy steel
Specifications
Width x Thickness
Inches
1/8 x .025
3/16 x .025
1/4 x .014
1/4 x .020
1/4 x .025
3/8 x .014
3/8 x .025
3/8 x .032
1/2 x .020
1/2 x .025
5/8 x .032
3/4 x .032
3/4 x .050
1 x .035
1 x .035 *Bright
1 x .042
1 x .042 *Bright
1 1/4 x .035
1 1/4 x .042
1 1/4 x .042 *Bright
1 1/2 x .045
2 x .035
2 x .042
mm
4 6
Teeth Per Inch
8 10 14 18 24 10 14 18 24 32 1 1.141.3 2 3 4
6 3 4 6
Raker
Wavy
Hook
Skip
3 x .64t t
4.8 x .64 t t t
6.4 x .30 t tt t
t
6.4 x .50
t
6.4 x .64 t t t t ttt tt t
9.5 x .30 tt t
t
9.5 x .64 t t t t t t t t t t
9.5 x .80 tt
12.7 x .50 t tt t tt
12.7 x .64 t t t t t t t t t t tt tttt t t
16 x .80
t t tt tt t t
19 x .80 t t t t t t t t t t t t
19 x 1.30 t t
27 x .90 t t t t t tt t t t t
27 x .90 t
27 x 1.07 t
27 x 1.07 t
32 x .90 t t t
32 x 1.07 t t tt
32 x 1.07 t t
38.1 x 1.14 t
50.8 x .90 t t
50.8 x 1.07 t t
t Standard Set t Heavy Set t D-Double Set Raker
* “Bright” specifications have an unblued, silver surface finish.
13
QUIK SILVER ® CARBON BLADES
Quik Silver® Carbon Furniture Blades
Applications
• Wood
• Chip board
• Plywood
• Cardboard
• Used on large, vertical,
high-speed wood
cutting machines
Ideal for use on large, high-speed vertical cutting band
machines used in the furniture industry. Blades offer
faster cutting while maintaining precision required in
the furniture industry.
BLADE FEATURES
• Special ETS (every tooth set) pattern and aggressive 10º hook
tooth design for faster cutting with longer tooth tip life
• Flexible backer resists fatigue but allows contour control
required in furniture manufacturing
• Manufactured from a single piece of high carbon steel with
individually hardened tooth tips
• Thicker blade is stiffer for more control
• Low cost-per-blade/low cost-per-cut
• Can be resharpened for longer tooth life
Carbon Furniture Production Blades
Width x Thickness
Inches
mm
1/4 x .025
1/4 x .032
3/8 x .025
3/8 x .032
1/2 x .025
1/2 x .032
5/8 x .032
3/4 x .032
6.4 x .64
6.4 x .80
9.5 x .64
9.5 x .80
12.7 x .64
12.7 x .80
16.0 x .80
19.0 x .80
Teeth Per Inch
346 2 346
Hook ETS
t
t
t
t
t
t
t
t
t
t
t
t Standard Set t ETS Set t Heavy Set
t D-Double Set Raker t Special Extra Heavy Set Hard Back
14
t
Hook Raker Set t
t
t
t
t
t
tt
tt
t
tt
t
t
t
t
tt
t
QUIK SILVER ® CARBON BLADES
Quik Silver® HEF/HB Wood Mill/Resaw Blades
Versatile blades offer high value in a variety of wood cutting
applications. Blades are manufactured from a single piece of
high carbon steel with individually hardened tooth tips.
Applications
• Portable and stationary
wood mills
• Single head and multi head resaw systems
• Scragg mills
BLADE FEATURES
• Available in both flex back & hard back
• Flex back blades are more fatigue resistant
• Hard back blades offer straighter cuts
• Low cost-per-blade/low cost-per-cut
• Can be resharpened for longer tooth life
Hard Edge Hard Back - (HB)
Width x Thickness
Inches
Teeth Per Inch
mm
1 x .035 27.5 x .9
1-1/4 x .035 32.0 x .9
1-1/4 x .042 32.0 x 1.1
1.3
Hard Edge Flex Back - (HEF)
Width x Thickness
Inches
mm
Teeth Per Inch
1
Hook
t
t
t
1.14 1.3 2
Hook
1 x .035
1 x .042
1-1/4 x .035
1-1/4 x .042
1-1/2 x .045
2 x .035
2 x .042
t Heavy Set
27.5 x .9
27.5 x 1.1
32.0 x .9
t
32.0 x 1.1
t
tt
38.1 x 1.1
t
50.8 x .9
t
50.8 x 1.1
t
tt
t
t
tt
t
t
t
t
t Bright Finish
Quik Silver® Wood Mill Blades
Ideal for wood cutting applications where blade
fatigue problems are an increased concern.
BLADE FEATURES
• Made from a single piece of Quik Silver
alloy steel with individually hardened
tooth tips
• Available in both flex back & hard back
• Flex back blades are fatigue resistant
• Hard back blades offer straighter cuts
• Low cost-per-blade/low cost-per-cut
• Can be resharpened for longer tooth life
Applications
• Wood cutting with increased fatigue resistance
Quik Silver Flex Back (WMF) & Hard Back (WMH)
Width x Thickness
Teeth Per Inch
Inches
mm 1 1.14 1.3 2
Hook
1 x .035 27.5 x .9
tt
tt
1-1/4 x .042
32 x 1.1 tt ttt ttt
1-1/2 x .045
38 x 1.1 tt
tt
tt
2 x .035
51 x .9 tt
tt
tt
2 x .042
51 x 1.1 tt
tt
tt
t WMF flexback t WMH hardback t WMH hardback - light set (.019/side)
15
CARBIDE GRIT BAND BLADES
Tungsten Carbide Grit Blades
Applications
• Fiberglass
• Ceramics
• Cast iron
• Graphite
• Tires & wire
reinforced rubber
• Cable & wire rope
• Brittle materials or
surfaces that chip
Ideal for cutting ceramics and other materials that are too hard
or abrasive for standard bi-metal blades, tungsten carbide grit
blades provide superior wear resistance.
BLADE FEATURES
• Very smooth finish
• Reversible to extend service life
• Available in continuous and gulleted cutting edges
• Continuous grit for brittle materials, or materials thinner than 1/4˝ (6.4mm) with surfaces that chip
• Gulleted grit for 1/4˝ and larger wall thickness
• Available in medium to coarse grit
• Medium grit for thin materials or fine finishes
• Coarse grit for cutting thick materials
Carbide Grit (Continuous)
Width x Thickness
Inches
mm
Grit Size
Medium
1/4 x .020 6.4 x .50
1/2 x .025 12.7 x .64
1 x .035
27 x .90
Coarse
t
t
tt
Carbide Grit (Gulleted)
Width x Thickness
Inches
mm
Medium
Grit Size
Medium
Coarse
Coarse
3/8 x .025 9.5 x .64 tt
1/2 x .025 12.7 x .64 tt
3/4 x .032
19 x .80 t t
1 x .035
27 x .90 t t
1-1/4 x .042 34 x 1.07 t
16
BLADE USAGE INFORMATION
Morse Band Saw Tension Gauge
Allows you to quickly check for under-tensioned or
over-tensioned blade conditions while the blade is
on the machine.
Tension gauge FEATURES
• Durable cast/powder coated body
• Calibrated gauge measures in lbs/in2
as well as kg’s/cm2
• Quality storage box with protective
foam inserts
benefits of proper
blade tension:
• Optimal blade life
• Precise cutting results
• Reduces the occurrence of
machine damage due to
blade over-tensioning
Model number: TENSIONGAUGE
Part number: 005005
Blade Break-In: Extremely Important
The extremely sharp tooth points and edges of new blades must be
broken-in before applying full feed pressure to the blade. A good
analogy is that of writing with a freshly sharpened wooden pencil.
Recommended Break-in procedure
• Maintain proper blade speed for the material to be cut.
• Reduce blade feed pressure or feed rate by 50% for the first
50 to 100 square inches of material cut.
• Gradually increase feed pressure or feed rate after break-in to target pressure or rate.
Warning About Blade Usage
CUTTING TOOLS CAN SHATTER AND/OR BREAK UNDER IMPROPER OR SEVERE USE. WEAR SAFETY EQUIPMENT, AND PARTICULARLY GOGGLES, GLOVES AND HEARING PROTECTION, AT ALL TIMES IN THE VICINITY OF THEIR USE. ALWAYS FOLLOW BAND SAW MACHINE MANUFACTURERS’ RECOMMENDATIONS.
17
BLADE PART NUMBERS
The M. K. Morse Company has begun using 10-digit numeric band saw blade part numbers rather than
alpha-numeric part numbers.
The first 6-digits of the part number identifies the material and size specifications. The last 4-digits identifies
the length of the blade for both weld-to-length bands and coil stock.
The following band saw blade part number reference chart provides the same details we have in-house to
configure the new part numbers. Customer Service at M. K. Morse will be able to assist all band saw blade
distributors with any cross referencing needed. We are providing this information so that our distributors
are informed and have all available information. If you have any questions, please contact your M. K. Morse
Customer Service Representative.
1st & 2nd Digits
Part #
00
10
11
13
14
15
16
17
18
19
20
30
31
33
34
36
38
39
40
41
42
43
44
45
46
47
48
49
50
51
55
57
60
61
63
64
65
66
67
68
70
71
72
73
74
75
80
81
82
83
91
92
MATERIAL / TOOTH SET STYLE
EXAMPLE 1
Part #
10
11
20
21
30
31
32
33
34
40
41
42
43
44
50
51
52
53
54
55
56
57
60
61
62
70
71
80
81
82
90
91
92
BLADE WIDTH
2.625 x .063
91
2/3
23
100' Coil
100C
5th & 6th Digits
Width & Thickness
.25 x .014
.375 x .014
.25 x .020
.50 x .020
.125 x .025
.1875 x .025
.25 x .025
.375 x .025
.50 x .025
.25 x .032
.375 x .032
.50 x .032
.625 x .032
.75 x .032
.25 x .035
.375 x .035
.50 x .035
.625 x .035
.75 x .035
1 x .035
1.25 x .035
2 x .035
1 x .042
1.25 x .042
2 x .042
1.25 x .045
1.5 x .045
.75 x .050
1.5 x .050
2 x .050
2 x .063
2.625 x .063
3 x .063
TOOTH COUNT
Part #
00
01
02
03
04
06
08
10
12
13
14
16
18
22
23
24
32
34
46
57
58
68
80
81
91
92
93
94
95
96
97
98
TPI
Carbide Grit
1
2
3
4
6
8
10
12
10 / 14
14
14 / 18
18
20 / 24
2/3
24
32
3/4
4/6
5/7
5/8
6 / 10
8 / 11
8 / 12
.75 / 1.10
1.4 / 2.5
1.3
1.14
1.15
1.1 / 1.5
1 / 1.5
1.5 / 2.0
7th, 8th & 9th Digits
BAND LENGTH
Number of feet multiplied by 12 plus additional inches.
(Unless using Coil Stock. Coil Length (in feet) + C )
10th Digit
PREVIOUS PART #ZWEN635C23HP
Therefore: Independence
Is shown as:
50
50 91 23 100C
FRACTION OF INCH / MILLIMETER
Part #
Inch Length
Part #
Millimeter Length
0
1
2
3
4
5
6
7
C
Even Length
1/8˝
1/4˝
3/8˝
1/2˝
5/8˝
3/4˝
7/8˝
Coil Stock
0
1
2
3
4
5
6
7
C
Even Length
3
6.4
9.5
12.7
16
19
22
Coil Stock
NEW PART # 509123100C
7th, 8th & 9th Digit
EXAMPLE 2
Number of millimeters multiplied by .03937 equals total
number of inches.
(Unless using Coil Stock. Coil Length (in feet) + C )
PREVIOUS PART #ZWEFH02M42HS
Therefore: M42 Straight Pitch Heavy Set
Is shown as:
45
NEW PART #
18
3rd & 4th Digits
Material Type
Set Style
M42
Positive, 6° Rake
QS HEF Carbon Hook Raker Set - Special Extra Heavy Set
QS HEF Carbon
Hook - Heavy Set
QS HEF Carbon
Hook - Double Set Raker
QS HEF Carbon
Wavy
QS HEF Carbon
Skip
QS HEF Carbon
Raker or Variable Pitch
QS HEF Carbon
Quik Silver Woodmill
QS HEF Carbon
Hook
QS HEF Carbon
Hook ETS
QS HEF Carbon
Bright
Matrix II
Positive Rake
Matrix II
Positive Rake - Heavy Set
Matrix II
0˚ Rake - Heavy Set
Matrix II
Wavy
Matrix II
Raker
Matrix II
Hook
Matrix II
0˚ Rake
M42
Positive Rake
The Morse Achiever™
10° Positive Rake
M42
0˚ Rake
The Morse Achiever™
0° Rake
M42
Wavy
M42
Straight Pitch - Heavy Set
M42
Raker
The Morse Achiever™
Variable, 6° Rake
M42
Hook
The Morse Achiever™
Heavy Set
Independence
Variable
Heavy Set
Independence II®
Variable
Independence II®
Variable
Independence EXS®
QS Hard Back Carbon Hook Raker Set - Special Extra Heavy Set
QS Hard Back Carbon
Hook - Heavy Set
QS Hard Back Carbon
Hook - Double Set Raker
QS Hard Back Carbon
Wavy
QS Hard Back Carbon
Skip
QS Hard Back Carbon
Raker or Variable Pitch
QS Hard Back Carbon
Quik Silver Woodmill
QS Hard Back Carbon
Hook
Tun. Carbide Grit - Continuous
Medium
Tun. Carbide Grit - Continuous
Medium Coarse
Tun. Carbide Grit - Continuous
Coarse
Tun. Carbide Grit - Gulleted
Medium
Tun. Carbide Grit - Gulleted
Medium Coarse
Tun. Carbide Grit - Gulleted
Coarse
Aluminum Foundry
M-Factor by Morse® - Carbide Tipped
Case Hardened
M-Factor by Morse® - Carbide Tipped
M-Factor by Morse® - Carbide Tipped
General Purpose
®
Exotic
M-Factor by Morse - Carbide Tipped
Challenger™
Positive Rake
Challenger™
Heavy Set
4554024284
3/4 x .035
54
2
02
35' 8-1/2" For 1/2" aka 4/8", thus 4
428
4
(35 x 12 = 420)
(420 + 8 = 428)
METRIC BAND LENGTH
SALES POLICY INFORMATION
The M. K. Morse Company Warranty
The M. K. Morse Company warrants each new product manufactured
and sold by it or one of its authorized distributors only against defects
in workmanship and/or materials under normal service, proper installation and use. THIS WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT
OF VERIFIED DEFECTIVE PRODUCTS AND EXCLUDES ANY AND ALL
IMPLIED WARRANTY OF MERCHANTABILITY AND ALL RISK AND LIABILITY WHATSOEVER RESULTING FROM ANY USE OF SAID PRODUCTS,
INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES. THERE ARE
NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE
FACE THEREOF. The provisions of this warranty and limitation of liability shall not be modified in any respect except by written document
signed by an officer of The M. K. Morse Company.
Trial Band Saw Blades From M. K. Morse
The M. K. Morse Company will provide bi-metal and carbon weld-tolength blades as a “Guaranteed Trial Order” (GTO) for the purpose of
user evaluation of performance. If the blade recommended by Morse or
approved by Morse for the particular application, fails to perform satisfactorily for the user, Morse will issue a full credit for the invoice value of
the blade upon the return of the blade to Morse.
In all instances where Morse provides bi-metal and carbon welded-tolength band saw blades for trial and evaluation, the Morse sales representative will provide follow-up.
Morse is confident in the ability of our blades to meet the end users expectations for performance.
19
BLADE FEATURES EXPLAINED
Anatomy of a Saw Blade
Although it looks like a flat piece of metal with teeth, a quality industrial band saw
blade is actually a sophisticated cutting tool. Its ability to efficiently cut through tough
metals, composite materials, plastics, and woods depends on a variety of interrelated
factors such as the design, spacing and set of the teeth; the design and capacity of the
gullets to make sure chips are efficiently removed; the composition of the backer strip;
and the gage of the metal. These considerations must be taken into account when
selecting the right blade for your application. The following Technical Pages will help
you arrive at the perfect Morse solution to your particular cutting problem.
2
3
4
1
9
10
12
8
5
13
11
6
7
20
1
Blade Back���������������The body of the blade not including tooth portion
2
Gage�������������������������The thickness of the blade
3
Width�����������������������The tip of tooth to back of blade
4
Set����������������������������The bending of teeth right or left
5
Tooth������������������������The cutting portion of the saw blade
6
Tooth Pitch��������������The distance from one tooth tip to the next
7
T.P.I.�������������������������The number of teeth per inch measured gullet to gullet
8
Gullet�����������������������The curved area between the tooth points
9
Gullet Depth������������The distance from the tooth tip to the bottom of the gullet
10
Tooth Face���������������The surface of the tooth on which the chip is formed
11
Tooth Flank��������������The angled back surface of the tooth opposite the tooth face
12
Tooth Rake Angle����The angle of the tooth face measured with respect to a line
perpendicular to the cutting direction of the saw
13
Tooth Tip������������������The cutting edge of the saw tooth
TOOTH SET SPECIFICATIONS
Standard (0º Rake)
Hook (Positive Rake)
Here’s where the blade makes the cut. The tooth design variables include shape,
position, set, type and spacing. The combination of these variables will determine
whether the blade can move easily through your material without binding or
becoming clogged with chips.
Raker
Recurring sequence of teeth - one set right, one set left, and one unset.
Modified Raker (double set raker)
Recurring sequence set left, right, left, right, straight tooth pattern.
Variable Pitch Modified Raker (D-Double set raker)
Set sequence depends on the number of teeth in the variable pitch tooth pattern.
Recurring sequence with more than two set teeth before an unset tooth.
Wavy
Groups of teeth, usually 3 or 4, set to each side in a controlled pattern with an
unset tooth between groups.
Alternate (ETS)
Every tooth set alternately to the left and right.
21
TOOTH PITCH PATTERNS
Band Saw Tooth Pitches
Variable Pitch
• Varying gullet depth
• 0˚ Rake angle
• Variable tooth spacing
Advantages
• Excellent chip carrying capacity
• Reduces harmonic vibration
Benefits
• Improves blade life
• Reduces noise
• Cuts smoother & more efficiently
Variable Pitch Positive Rake
• Varying gullet depth
• Variable tooth spacing
• Positive rake angle
Advantages
• Better chip formation
• Excellent chip carrying capacity
• Reduces harmonic vibration
• More aggressive cutting
Benefits
• Cuts smoother, cuts faster
• Wide range of applications
• Reduces noise
• Easier chip generation
Standard Raker
• Equally spaced teeth
• 0˚ Rake angle
Advantages
• Excellent chip carrying capacity
Benefits
• General purpose
Skip
• Wide flat gullets
• 0˚ Rake angle
• Equally spaced teeth
Advantages
• Excellent chip carrying capacity
• Provide coarse pitch on
narrow bands
• Flat gullets
Benefits
• Excellent cutting for non-metallic & non-ferrous
applications, (wood, plastic, brass, copper,
bronze & aluminum)
• Help break “stringy” chips
Hook
• Wide rounded gullets
• Equally spaced teeth
• Positive rake angle
Advantages
• Excellent chip carrying in
non-metallic applications
• Positive rake provides better tip
22
penetration with less feed pressure
Benefits
• Good cutting performance in
discontinuous chip forming
materials (cast iron)
• Fast cutting with good
surface finish
TEETH PER INCH SELECTION
Tooth Selection Guide (teeth per inch)
Band saw tooth size (Teeth Per Inch) is determined by the size and type of material to be
cut and the desired finish. To select T.P.I. using this chart, find the colored chart for the type
of material you wish to cut. Move up to the correct material size next to the chart. Follow
across to the chart for the appropriate T.P.I. for your blade.
Material Size
(Inches)
IN.
0
.1
.2
.3
.4
.5
.6
.7
.8
.9
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
5
6
7
8
9
10
15
30
Teeth Per Inch
14/18
10/14
8/12
6/10
5/8
Material Size
(Metric)
IN.
14/18
10/14
8/12
6/10
5/8
4/6
4/6
3/4
3/4
2/3
2/3
1.4/2.5
1.4/2.5
1/1.5
1/1.5
Rectangular Solids:
(Use Width)
0
2.5
5.1
7.6
10.2
12.7
15.0
17.8
20.0
22.9
25.4
31.8
38.1
44.5
50.8
57.2
63.5
69.9
76.2
82.6
88.9
95.3
101.6
127.0
152.4
177.8
203.0
228.6
254.0
381.0
762
Wall Thickness
(Inches)
1/16
1/8
3/16
1/4
5/16
Teeth
Per
Inch
10/14
8/12
6/10
5/8
Wall Thickness
(Metric)
1.8
3.2
4.8
6.3
7.9
3/8
9.5
7/16
11.0
1/2
12.7
9/16
4/6
14.3
5/8
15.8
11/16
17.5
3/4
19.0
13/16
20.6
7/8
22.0
15/16
3/4
23.8
1
25.4
1-1/8
28.6
1-1/4
32.0
1-3/8
1-1/2
2/3
35.0
38.0
Pipe Tubing Structurals
(Use Wall Thickness)
Round Solids:
(Use Diameter)
Cutting speed - structurals rule of thumb:
When cutting structurals use a cutting speed of
250-325 S.F.M. Wet • 200-250 S.F.M. Dry
23
BLADE SPEED/REMOVAL RATES
For use with Bi-Metal Blades*
TYPE OF MATERIAL
STRUCTURAL STEEL SHAPES
A36, A242, A662
CARBON STEEL
1005 - 1013
1015 - 1035
1040 - 1059
1060 - 1080
1084 - 1095
FREE MACHINING STEEL
1110
1117 - 1118
1137 - 1151
1211 - 1215
MANGANESE STEEL
1330 - 1345
1513 - 1536
1541 - 1572
MOLYBDENUM STEEL
4012 - 4024
4027 - 4037
4042 - 4047
CHROME MOLY STEEL
4118 - 4130
4135 - 4142
4145 - 4161
NICKEL CHROME MOLY STEEL
4317 - 4320
4337 - 4340
4718 - 4720
8615 - 8627
8630 - 8645
8647 - 8660
8715 - 8750
9310 - 9317
9437 - 9445
9747 - 9763
9840 - 9850
NICKEL MOLY STEEL
4615 - 4626
4815 - 4820
CHROMIUM STEEL
5045 - 5046
5120 - 5135
5140 - 5160
50100 - 52100
CHROME VANADIUM STEEL
6118
6150
SILICON STEEL
9254 - 9260
COLD WORK DIE STEEL
A2, A3, A6
A7
D2, D3, D4
D7
O1, O2
O6, O7
HOT WORK STEEL
H12, H13, H21
H22, H24, H25
SHOCK RESISTANT STEEL
S1
S2, S5
24
UNDER 1”
1” TO 3”
3” TO 6”
6” - OVER
Blade Removal BladeRemoval BladeRemoval BladeRemoval
Speed Rate SpeedRate SpeedRate SpeedRate
(SFM)
(in2/min.) (SFM)(in2/min.) (SFM)(in2/min.) (SFM)(in2/min.)
300 280 260 240
310
300
240
220
200
8 - 12
9 - 13
5 - 7
4 - 7
3 - 6
290
280
230
205
190
10 - 15
13 - 17
6 - 8
7 - 8
5 - 7
270
260
205
195
180
13 - 18
15 - 20
8 - 11
8 - 11
6 - 8
250
250
190
160
130
11 - 16
11 - 17
7 - 10
7-9
5-8
310
300
260
310
9 - 12
9 - 13
6 - 8
9 - 12
280
270
230
290
11 - 15
11 - 16
7 - 10
11 - 15
280
270
220
270
15 - 18
14 - 19
10 - 13
14 - 19
240
230
190
250
12 - 15
12 - 17
8 - 12
13 - 17
260
300
245
4 - 7
11 - 13
4 - 7
240
280
230
6 - 8
14 - 15
6 - 8
215
260
200
8 - 11
16 - 18
9 - 11
195
240
175
6-9
12 - 17
8 - 10
250
240
220
4 - 7
4 - 7
4- 6
230
230
210
6 - 8
6 - 9
5 - 7
200
190
170
8 - 11
8 - 11
6- 9
175
170
150
6 - 10
6 - 10
5-8
230
220
200
5 - 9
4 - 7
2 - 6
220
210
180
7 - 11
6 - 9
5 - 8
200
190
180
9 - 13
9 - 13
6 - 10
180
170
160
8 - 12
8 - 12
5-8 210
200
275
210
210
210
210
190
210
210
210
4 - 6
4 - 6
4 - 7
4 - 6
3 - 5
2 - 4
3 - 6
2- 4
4 - 6
3 - 5
4 - 7
190
180
270
190
190
190
190
160
190
190
190
5 - 8
4 - 7
6 - 8
5 - 7
4 - 6
3- 5
5 - 8
3 - 5
5 - 7
4 - 6
5 - 8
170
160
245
170
170
170
170
150
170
170
170
6 - 9
5 - 8
7 - 10
6 - 8
5 - 7
4 - 6
6 - 8
3 - 5
5 - 8
4 - 7
6 - 9
150
140
220
150
150
150
150
130
150
150
150
5-8
4-7
5-8
4-7
4-6
3-5
4-7
2-4
4-7
3-6
4-8
220
210
4 - 7
3 - 6
200
190
5 - 8
3 - 6
180
170
6 - 9
4 - 6
160
140
5-8
4-6
210
230
210
175
5 -8
4 - 6
4 - 6
3 - 5
190
210
190
140
6 - 9
6 - 8
4 - 6
4 - 6
170
180
170
130
8 - 11
7 - 10
5 - 7
5 - 7
150
160
150
110
7 - 10
5-9
4-6
4-6
230
210
4 - 6
3 - 5
210
190
5 - 8
4 - 7
190
170
6 - 9
5 - 8
170
150
5-8
4-7
210
3 - 5
190
4 - 6
190
4 - 8
160
3-7
210
170
135
110
240
230
2 - 4
2 - 4
1 - 3
1 - 3
3 - 6
4 - 7
190
160
115
90
230
220
3 - 5
4 - 5
2 - 4
1 - 3
4 - 7
5 - 8
190
150
120
80
200
200
3 - 6
3 - 6
2 - 4
2 - 3
5 - 8
6 - 9
160
125
80
60
180
160
2-4
2-4
2-3
1-3
4-7
5-8
235
190
3 - 6
2 - 4
200
175
4 - 6
2 - 5
190
160
4 - 7
3 - 6
170
135
3-6
2-4
230
180
3 - 6
2 - 4
210
165
4 - 6
3 - 5
200
150
4 - 7
3 - 6
160
120
3-6
2-4
BLADE SPEED/REMOVAL RATES
For use with Bi-Metal Blades*
TYPE OF MATERIAL
UNDER 1”
3” TO 6”
6” - OVER
Blade Removal BladeRemoval BladeRemoval BladeRemoval
Speed Rate SpeedRate SpeedRate SpeedRate
(SFM)
(in2/min.) (SFM)(in2/min.) (SFM)(in2/min.) (SFM)(in2/min.)
SPECIAL PURPOSE STEEL
L2, L6
L7
WATER HARDENING STEEL
W1
HIGH SPEED STEEL
M1, M2, M7
M3, M4, M10
M30, M33
M41, M42, M43
T1, T2
T4, T5, T6
T15, M15
AUSTENITIC STAINLESS STEEL
201, 202, 301 - 304
303, 303F, 303Se
305, 308 - 314
316, 317, 329
321, 347, 348
330
FERRITIC STAINLESS STEEL
429, 430
430F, 430FSe
434, 436
442
446
MARTENSITIC STAINLESS
403, 410, 420
414, 416Se
420F, 416
440A, B, C
501, 502
NICKEL BASED ALLOYS
Monel
K-Monel
R-Monel
K-R Monel
Inconel
Inconel 625-x-750
Inconel 718
Incoloy 800 - 802
Incoloy 804 - 825
Waspalloy
Hastelloy A
Hastelloy B
Hastelloy C
Rene 41
Udimet 500
TITANIUM
6AL 4V
MARAGING STEEL
Most
BRONZE
Most
Aluminum Bronze
ALUMINUM
Most
CAST IRON
Class 20
Class 40
Ductile 60-40-18, 150 HB
Ductile 80-55-06, 225 HB
1” TO 3”
210
200
3 - 5
3 - 5
210
190
4 - 7
4 - 6
190
180
5 - 8
4 - 7
175
130
4-7
3-6
265
3 - 6
240
5 - 7
220
5 - 7
180
3-5
165
125
100
100
150
125
90
2 - 4
2 - 4
1 - 3
1 - 3
2 - 4
1 - 3
1 - 3
150
100
90
90
135
110
70
2 - 5
2 - 5
2 - 3
1 - 3
2 - 4
1 - 4
1 - 3
145
100
75
75
120
100
60
3 - 6
3 - 5
2 - 3
1 - 4
2 - 5
2 - 4
1 - 3
100
80
70
70
100
85
50
3-5
3-4
1-3
1-3
2-4
1-3
1-2
135
160
100
100
140
85
3 - 4
3 - 6
1 - 2
1 - 2
2 - 4
1 - 2
120
140
85
90
125
65
2 - 5
3 - 6
1 - 2
1 - 2
2 - 5
1 - 3
120
135
75
80
120
55
3 - 6
4 - 6
1 - 3
1 - 3
3 - 6
1 - 4
85
90
65
60
90
45
2-4
3-5
1-2
1-2
2-4
1-2
120
130
100
110
90
2 - 4
3 - 5
2 - 4
2 - 4
2 - 4
100
115
80
85
70
3 - 4
5 - 6
3 - 4
3 - 5
3 - 4
90
100
75
75
60
3 - 6
5 - 7
3 - 5
3 - 6
2 - 5
75
90
55
60
50
2-4
4-6
3-4
3-5
1-3
170
235
220
130
135
2 - 5
5 - 9
3 - 8
2 - 4
1 - 2
155
210
200
120
120
3 - 6
6 - 9
5 - 9
2 - 6
2 - 4
145
195
190
110
100
3 - 7
7 - 11
6 - 10
3 - 7
3 - 4
100
170
150
70
80
2-4
5-9
4-8
1-4
2-3
100
115
130
115
105
95
95
95
60
100
130
110
100
90
95
1 - 4
1 - 4
2 - 4
1 - 4
2- 4
1 - 2
1 - 2
1 - 2
1
1
2 - 3
1 - 2
1 - 2
1
1
90
90
100
100
90
80
80
75
40
90
110
80
90
80
80
1 - 4
1 - 4
2 - 5
1 - 4
2 - 4
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
3 - 4
1 - 3
1 - 2
1 - 2
1 - 2
85
70
90
100
75
70
70
60
40
70
100
75
80
60
70
2 - 4
2 - 4
3 - 5
2 - 5
2 - 3
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
4 - 6
1 - 4
1 - 2
1 - 2
1 - 2
65
50
60
65
50
40
40
35
30
50
70
60
65
50
60
1-3
1-2
1-4
1-3
1-2
1
1
1
1
1
1-3
1-2
1
1
1
65
.5-1
50
1 - 2
50
1 - 2
40
.5 - 1
190
3 - 4
145
4 - 6
110
6 - 7
90
4-6
230
100
6 - 9
2 - 4
205
95
10 - 12
3 - 4
180
85
10 - 12
3 - 5
140
70
7-9
3-4
800 700 600 500
210
170
240
140
9 - 12
7 - 9
6 - 8
3 - 4
200
160
230
130
11 - 15
7 -10
8 - 10
4 - 5
180
140
230
120
11 - 15
8 - 12
8 - 10
5 - 7
*Reduce speeds by 50% for carbon blades. For carbide tipped blades, ask your Morse sales contact.
160
120
220
110
10 - 14
7 - 11
6-7
3-5
25
CUT TIME CALCULATOR
The following chart will help you determine how long a cut will take by
cross referencing the bar size to be cut with the removal rate being used.
Removal Rate - Square Inches Per Minute
1 2 3 4 5 6 7 8 9 10 1112 13 141516 1718
Bar
Dia.
Bar in2
in2 in2
in2
in2
in2
in2
in2
in2
in2
in2
in2
in2
in2
in2
in2
in2 in2
Area, /min /min/min /min /min/min /min /min/min /min /min/min /min /min/min/min /min/min
In2
Minutes Per Cut
1.000.79.79.39.26.20.16.13.11.10.09.08.07.07.06.06.05.05.05.04
1.251.231.2.61.41.31.25.20.18.15.14.12.11.10.09.09.08.08.07.07
1.501.771.8.88.59.44.35.29.25.22.20.18.16.15.14.13.12.11.10.10
1.752.412.41.2.80.60.48.40.34.30.27.24.22.20.19.17.16.15.14.13
2.003.143.11.61.0.79.63.52.45.39.35.31.29.26.24.22.21.20.18.17
2.253.984.02.01.31.0.80.66.57.50.44.40.36.33.31.28.27.25.23.22
2.504.914.92.51.61.21.0.82.70.61.55.49.45.41.38.35.33.31.29.27
2.755.945.93.02.01.51.21.0.85.74.66.59.54.49.46.42.40.37.35.33
3.007.077.13.52.41.81.41.21.0.88.79.71.64.59.54.50.47.44.42.39
3.258.308.34.12.82.11.71.41.21.0.92.83.75.69.64.59.55.52.49.46
3.509.629.64.83.22.41.91.61.41.21.11.0.87.80.74.69.64.60.57.53
3.7511.04
11.05.53.72.82.21.81.61.41.21.11.0.92.85.79.74.69.65.61
4.0012.57
12.66.34.23.12.52.11.81.61.41.31.11.01.0.90.84.79.74.70
4.2514.19
14.27.14.73.52.82.42.01.81.61.41.31.21.11.0.95.89.83.79
4.5015.90
15.98.05.34.03.22.72.32.01.81.61.41.31.21.11.11.0.94.88
4.7517.72
17.78.95.94.43.53.02.52.22.01.81.61.51.41.31.21.11.01.0
5.0019.64
19.69.86.54.93.93.32.82.52.22.01.81.61.51.41.31.21.21.1
5.2521.65
21.610.87.25.44.33.63.12.72.42.22.01.81.71.51.41.41.31.2
5.5023.76
23.811.97.95.94.84.03.43.02.62.42.22.01.81.71.61.51.41.3
5.7525.97
26.013.08.76.55.24.33.73.22.92.62.42.22.01.91.71.61.51.4
6.0028.27
28.314.19.47.15.74.74.03.53.12.82.62.42.22.01.91.81.71.6
6.2530.68
30.715.310.27.76.15.14.43.83.43.12.82.62.42.22.01.91.81.7
6.5033.18
33.216.611.18.36.65.54.74.13.73.33.02.82.62.42.22.12.01.8
6.7535.78
35.817.911.98.97.26.05.14.54.03.63.33.02.82.62.42.22.12.0
7.0038.48
38.519.212.89.67.76.45.54.84.33.83.53.23.02.72.62.42.32.1
7.2541.28
41.320.613.8
10.38.36.95.95.24.64.13.83.43.22.92.82.62.42.3
7.5044.18
44.222.114.7
11.08.87.46.35.54.94.44.03.73.43.22.92.82.62.5
7.7547.17
47.223.615.7
11.89.47.96.75.95.24.74.33.93.63.43.12.92.82.6
8.0050.27
50.325.116.8
12.610.18.47.26.35.65.04.64.23.93.63.43.13.02.8
8.2553.46
53.526.717.8
13.410.78.97.66.75.95.34.94.54.13.83.63.33.13.0
8.5056.75
56.728.418.9
14.211.39.58.17.16.35.75.24.74.44.13.83.53.33.2
8.7560.13
60.130.120.0
15.012.0
10.08.67.56.76.05.55.04.64.34.03.83.53.3
9.0063.62
63.631.821.2
15.912.7
10.69.18.07.16.45.85.34.94.54.24.03.73.5
9.2567.20
67.233.622.4
16.813.4
11.29.68.47.56.76.15.65.24.84.54.24.03.7
9.5070.88
70.935.423.617.714.211.810.1 8.9 7.9 7.1 6.4 5.9 5.5 5.1 4.7 4.4 4.2 3.9
9.7574.66
74.737.324.918.714.912.410.7 9.3 8.3 7.5 6.8 6.2 5.7 5.3 5.0 4.7 4.4 4.1
10.00
78.54
78.539.326.219.615.713.111.2 9.8 8.7 7.9 7.1 6.5 6.0 5.6 5.2 4.9 4.6 4.4
26
To find the area of bars larger than 10˝ diameter use the formula “π(3.14) x radius2”. Take half the diameter (radius) multiply it
by itself. Then multiply that by 3.14. Example: 20˝ bar. Half the diameter is 10˝. 10 x 10 = 100. 100 x 3.14 = 314 square inches.
METAL CHIP EVALUATION
Using Metal Chips to Troubleshoot
You can improve the productivity of your metal cutting operation by paying close attention to the chips made by the blade cutting through metal. This chart shows some of the
common problems that can be discovered and solved by paying attention to chips
Thick, Hard
and Short
Blue or
Brown
Silver
Powder
Silver
Silver
Decrease
Decrease
Suitable
Suitable
Decrease
Increase
�
Suitable
Decrease
�
Other
Check Cutting
Fluid & Mix
�
�
Thin and
Tightly
Curled
Blade
Feed Rate
�
Thin and
Curled
Blade
Speed
�
Chip
Color
�
Chip
Condition
�
Chip
Form
Check Tooth
Pitch
Minimum Cut Radius Per Blade Width
The minimum radius that can be cut with a blade width is
most often used for die block cutting and wood cutting.
Minimum radius cut for a given blade width
Blade
Width
Minimum
Radius
Materials Thickness 1˝/25mm
1˝/25mm7-1/4˝/184mm
3/4˝/19mm5-7/16˝/138mm
5/8˝/16mm3-3/4˝/95mm
1/2˝/13mm2-1/2˝/63mm
3/8˝/10mm1-1/4˝/32mm
1/4˝/6mm5/8˝/16mm
3/16˝/5mm3/8˝/10mm
1/8˝/3mm7/32˝/5.5mm
27
BLADE PROBLEM SOLVING
Problem
Problem Cause
Premature
Blade Breakage
Straight Break indicates fatigue
Material
Material
Inaccurate Cut
Band Leading in Cut
Chip Welding
Teeth Fracture
Back of tooth
indicates work
spinning in clamps
Irregular Break
Indicates material movement
28
•Incorrect blade - teeth too coarse
•Blade tension too high
•Side guides too tight
•Use finer tooth pitch
•Reduce blade tension (see machine manual)
•Check side guide clearance
• Damaged or misadjusted blade guides
•Excessive feed
•Incorrect cutting fluid
•Wheel diameter too small for blade
•Blade rubbing on wheel flanges
•Teeth in contact with work before
starting saw
•Incorrect blade speed
•Check all guides for alignment/damage
•Reduce feed pressure
•Check coolant
•Use thinner blade
•Adjust wheel alignment
•Allow 1/2” clearance before starting cut
•Teeth pointing in wrong direction /
blade mounted backwards
•Improper or no blade break-in
•Hard spots in material
•Install blade correctly. If teeth are facing
the wrong direction, flip blade inside out
•Break in blade properly (Page 17)
•Check for hardness or hard spots like
scale or flame cut areas
•Increase feed pressure
•Check coolant type
•Check coolant mixture
• Check recommended blade speed (Page 24-25)
•Increase feed pressure
•Increase tooth size
•Material work hardened
•Improper coolant
•Improper coolant concentration
•Speed too high
•Feed too light
•Teeth too small
Premature
Dulling of Teeth
Solution
•Tooth set damage
•Excessive feed pressure
•Improper tooth size
•Cutting fluid not applied evenly
•Guides worn or loose
(see machine manual)
•Increase or decrease blade speed
•Insufficient blade tension
•Check for worn set on one side of blade
•Reduce feed pressure
•Check tooth size chart (Page 23)
•Check coolant nozzles
•Tighten or replace guides, check for
proper alignment
•Adjust to recommended tension
•Over-feed
•Insufficient blade tension
•Tooth set damage
•Guide arms loose or set too far apart
•Chips not being cleaned from gullets
•Teeth too small
•Reduce feed force
•Adjust recommended tension
•Check material for hard inclusions
•Position arms as close to work as
possible. Tighten arms.
•Check chip brush
•Increase tooth size
•Insufficient coolant flow
•Wrong coolant concentration
•Excessive speed and/or pressure
•Tooth size too small
•Chip brush not working
•Check coolant level and flow
•Check coolant ratio
•Reduce speed and/or pressure
•Use coarser tooth pitch
•Repair or replace chip brush
•Incorrect speed and/or feed
•Incorrect blade pitch
•Saw guides not adjusted properly
•Chip brush not working
•Work spinning or moving in vise
•Check cutting chart (Page 24-25)
•Check tooth size chart (Page 23)
•Adjust or replace saw guides
•Repair or replace chip brush
• Check bundle configuration/adjust vise pressure
•Indexing out of sequence
•Material loose in vice
•Check proper machine movement
•Check vise or clamp
BLADE PROBLEM SOLVING
Problem
Problem Cause
•Feed pressure too high
•Tooth stuck in cut
•Improper or insufficient coolant
•Incorrect tooth size
•Hard spots in material
•Work spinning in vise - loose nest
or bundle
•Blade speed too slow
•Blade teeth running backwards
•Chip brush not working
Teeth Stripping
Wear on Back of
Blades
Rough Cut
Washboard surface
Vibration and or chatter
Solution
•Reduce feed pressure
•Do not enter old cut with a new blade
•Check coolant flow and concentration
•Check tooth size chart (Page 23)
•Check material for hard inclusions
•Check clamping pressure - be sure
work is held firmly
•Increase blade speed - see cutting chart
(Page 24-25)
•Reverse blade (turn inside out)
•Repair or replace chip brush
•Excessive feed pressure
•Insufficient blade tension
•Back-up guide roll frozen,
damaged, or worn
•Blade rubbing on wheel flange
•Decrease feed pressure
•Increase blade tension and readjust guides
•Repair or replace back-up roll or guide
•Dull or damaged blade
•Incorrect speed or feed
•Insufficient blade support
•Incorrect tooth pitch
•Insufficient coolant
•Replace with new blade
•Increase speed or decrease feed
•Move guide arms as close as possible
to the work
•Use finer pitch blade
•Check coolant flow
•Saw guide inserts or wheel flange are
riding on teeth
•Insufficient blade tension
•Hard spots in material
•Back-up guide worn
•Check machine manual for correct
blade width
•Tension blade properly
•Check material for inclusions
•Replace guide
•Blade binding in cut
•Side guides too tight
•Radius too small for blade width
•Work not firmly held
•Erratic coolant flow
•Excessive blade tension
•Decrease feed pressure
•Adjust side guide gap
•Use narrower blade
•Check clamping pressure
•Check coolant nozzles
•Decrease blade tension
•Incorrect blade
•Incorrect feed or speed
•Improper or insufficient coolant
•Use coarser tooth pitch
•Increase feed or decrease speed
•Check coolant flow
•Adjust wheel cant
Wear Lines, Loss of Set
Twisted Blade
Profile sawing
Blade Wear
Teeth blued
29
APPLICATION USAGE NOTES
Blade Usage Notes
Experience is often the best way to save time and money in your usage of band saws
for repeated cutting applications. By tracking the type of blades used, blade life, cut
times and machine settings for a given material, you will develop a knowledge base
for later comparison. It will also better equip the technical support staff at M. K. Morse
to help you get optimum results in your band saw usage.
30
blade selection worksheet
Contact Morse Technical Assistance
Blade Recommendation Checklist
Complete and Fax to: 1-330-453-1111
or call 1-330-453-8187
or visit www.bladewizard.com
Complete by: _________________________ Date _____________
User Information
Distributor Information
Company:_____________________________________________
Company:_____________________________________________
Address:______________________________________________
Address:______________________________________________
_____________________________________________________
_____________________________________________________
Contact:_______________________________________________
Contact:_______________________________________________
Phone No.:____________________________________________
Phone No.:____________________________________________
Fax No.:_______________________________________________
Blade Information
e-mail:________________________________________________
Manufacturer:__________________________________________
Length:____________________ Width: ____________________
Machine Information
Thickness: __________________ Tooth Pitch: _______________
Make:_________________________________________________
Type:
o Carbon o Matrix o
M42
o Other __________
Model:________________________________________________
Monthly blade usage:___________________________________
o
Current blade distributor: ________________________________
Blade Speed (sfm): _________________________
Current blade cost: $ __________ (ea.)
Feed Rate: _______________________________
Vertical
o Horizontal
Application Information
Solid Square
_______
Solid Round
I-Beam
Angle Iron
Channel Iron
Round Tubing
Square Tubing
______
______
______
_______
______
_______
On the red lines provided below each icon, list material width and wall thickness (if applicable) for each material type being cut
Types of Cutting
(Check all that apply)
o Single Piece Cut-off
o Bundled Cut-off
1. Number of pieces: ___________
2. Check each configuration that applies:
o o o o o o o o
Materials Being Cut
(Check all that apply)
Type
Non-Ferrous
o
o Mild Carbon Steels
o Tool Steels
o Stainless Steels
o Super Alloys
o Other
Grade
_____________________
_____________________
_____________________
_____________________
_____________________
_____________________
Production Usage (per day)
o Light (2 hrs. or less)
o Medium (3-6 hrs.)
o Heavy (7 hrs. or more)
Problems with Present Blade
o Breaking blades
o Tooth strippage
o Cost
o Premature dulling
o Crooked Cut
o No Problems
Blade Recommendation
31
PHONE:
(330) 453-8187
HOTLINE:
(800) 733-3377
FAX:
(330) 453-1111
FAX HOTLINE: (800) 729-1112
EMAIL:[email protected]
WEBSITES
mkmorse.com
bladewizard.com
independenceband.com
MAILING ADDRESS
P. O. BOX 8677
Canton, Ohio 44711 USA
SHIPPING ADDRESS
1101 – 11th Street, S.E.
Canton, Ohio 44707 USA
CATALOGB 5/13
© 2013 The M. K. Morse Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement