VocoPro LightShow Magic Owner's manual

VocoPro LightShow Magic Owner's manual
LightShow Magic
Battery Powered Karaoke PA System w/ 3-in-1 Light Show
o
w
n
e
r
'
s
m
a
n
u
a
l
Table of Contents
FCC Information....................................................... 4
Safety Instructions.................................................... 5
Welcome................................................................ 6
Listening for a Lifetime.............................................. 7
Getting Started........................................................ 8
Features................................................................. 9
Getting Connected.................................................. 10
Descriptions and Functions...................................... 14
Troubleshoot......................................................... 17
FCC Information
CAUTION:
READ THIS BEFORE OPERATING YOUR UNIT
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!: This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Vocopro may void your authority, granted by the FCC,
to use this product.
1. To ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2. Install your unit in a cool, dry, clean place - away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers, v
motors). To prevent fire or electrical shock, do not
expose to rain and water.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable(s) supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your
FCC authorization to use this product in the U.S.A.
3. Do not operate the unit upside-down.
4. Never open the cabinet. If a foreign object drops into
the set, contact your dealer.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class "B" digital devices. Compliance with
these requirements provides a reasonable level of
assurances that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment
generates/uses radio frequencies and, if not installed
and used according to the instructions found in the
owner's manual, may cause interference harmful to the
operation of other electronic devices. Compliance with
FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found
to be the source of interference, which can be
determined by turning the unit "Off" and "On", please try
to eliminate the problem by using one of the following
measures:
5. Place the unit in a location with adequate air
circulation. Do not interfere with its proper ventilation;
this will cause the internal temperature to rise and may
result in a failure.
6. Do not use force on switches, knobs or cords. When
moving the unit, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
7. Do not attempt to clean the unit with chemical solvents:
this might damage the finish. Use a clean, dry cloth.
8. Be sure to read the "Troubleshooting" section on
common operating errors before concluding that your
unit is faulty.
Relocate either this product or the device that is being
affected by the interference.
9. This unit consumes a fair amount of power even when
the power switch is turned off. We recommend that you
unplug the power cord from the wall outlet if the unit is
not going to be used for a long time. This will save
electricity and help prevent fire hazards. To disconnect
the cord, pull it out by grasping the plug. Never pull the
cord itself.
Use power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter(s).
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300-ohm ribbon
lead, change the lead-in to coaxial type cable.
10. To prevent lightning damage, pull out the power cord
and remove the antenna cable during an electrical
storm.
If these corrective measures do not produce satisfactory
results, please contact your local retailer authorized to
distribute Vocopro products. If you can not locate the
appropriate retailer, please contact Vocopro, 1728
Curtiss Court, La Verne, CA 91750.
11. The general digital signals may interfere with other
equipment such as tuners or receivers. Move the
system farther away from such equipment if
interference is observed.
NOTE:
Please check the copyright laws in your country
before recording from records, compact discs,
radio, etc. Recording of copyrighted material may
infringe copyright laws.
CAUTION
The apparatus is not disconnected from the AC power
source so long as it is connected to the wall outlet,
even if the apparatus itself is turned off. To fully ensure
that the apparatus is indeed fully void of residual power,
leave unit disconnected from the AC outlet for at least
fifteen seconds.
Voltage Selector (General Model Only)
Be sure to position the voltage selector to match the
voltage of your local power lines before installing the
unit.
110V
4
Safety Instructions
8. Ventilation - The appliance should be situated so its
location does not interfere with its proper ventilation.
For example, the appliance should not be situated on a
bed, sofa, rug, or similar surface that may block the
ventilation slots.
CAUTION
RISK OF SHOCK
CAUTION: To reduce the risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Only refer
servicing to qualified service personnel.
9. Heat - The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.
10. Power Sources - The appliance should be
connected to a power supply only of the type
described in the operating instructions or as marked
on the appliance.
Explanation of Graphical Symbols
The lightning flash & arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of danger.
11. Grounding or Polarization - Precautions should be
taken so that the grounding or polarization means of
an appliance is not defeated.
12. Power-Cord Protection - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where
they exit from the appliance.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and servicing instructions.
WARNING
13. Cleaning - Unplug this unit from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
To reduce the risk of fire or electric shock, do
not expose this unit to rain or moisture.
14. Power lines - An outdoor antenna should be
located away from power lines.
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
15. Nonuse Periods - The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
16. Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
3. Heed Warnings - All warnings on the appliance and in
the operating instructions should be adhered to.
17. Damage Requiring Service - The appliance should
be serviced by qualified service personnel when:
4. Follow Instructions - All operating and use
instructions should be followed.
A.
B.
C.
D.
The power supply cord or plug has been damaged; or
Objects have fallen into the appliance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
5. Attachments - Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
6. Water and Moisture - Do not use this unit near water.
For example, near a bathtub or in a wet basement and
the like.
18. Servicing - The user should not attempt to service
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
7. Carts and Stands - The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
Note:
To CATV system installer's (U.S.A.): This reminder is
provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected as close to the point of
cable entry as practical.
7 A. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause an overturn.
5
Welcome
And thank you for purchasing the LightShow Magic from VocoPro, your ultimate
choice in Karaoke entertainment! With years of experience in the music entertainment
business, VocoPro is a leading manufacturer of Karaoke equipment, and has been
providing patrons of bars, churches, schools, clubs and individual consumers the
opportunity to sound like a star with full-scale club models, in-home systems and mobile
units. All our products offer solid performance and sound reliability, and to reinforce our
commitment to customer satisfaction, we have customer service and technical support
professionals ready to assist you with your needs. We have provided some contact
information for you below.
VocoPro
1728 Curtiss Court
La Verne, CA 91750
Toll Free: 800-678-5348
TEL: 909-593-8893
FAX: 909-593-8890
VocoPro Company Email Directory
Customer Service & General Information
[email protected]
Tech Support
[email protected]
Remember Our Website
Be sure to visit the VocoPro website www.vocopro.com for the latest information on
new products, packages and promos. And while you're there don't forget to check out
our Club VocoPro for Karaoke news and events, chat rooms, club directories and even
a KJ Service directory!
We look forward to hearing you sound like a PRO, with VocoPro, the singer’s ultimate
choice.
FOR YOUR RECORDS
Please record the model number and serial number below, for easy reference, in case of loss or theft. These
numbers are located on the rear panel of the unit. Space is also provided for other relevant information
Model Number
Serial Number
Date of Purchase
Place of Purchase
Listening for a Lifetime
Selecting fine audio equipment such as the unit youʼve just purchased is only the start of your
musical enjoyment. Now itʼs time to consider how you can maximize the fun and excitement your
equipment offers. VocoPro and the Electronic Industries Associationʼs Consumer Electronics
Group want you to get the most out of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to a higher volume of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
• Pay attention to the different levels in various recordings.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Associationʼs Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for your protection.
Some common decibel ranges:
Level
30
40
50
60
70
80
Example
Quiet library, Soft whispers
Living room, Refrigerator, Bedroom away from traffic
Light traffic, Normal Conversation
Air Conditioner at 20 ft., Sewing machine
Vacuum cleaner, Hair dryer, Noisy Restaurant
Average city traffic, Garbage disposals, Alarm clock at 2 ft.
The following noises can be dangerous under constant exposure:
Level
90
100
120
140
180
Example
Subway, Motorcycle, Truck traffic, Lawn Mower
Garbage truck, Chainsaw, Pneumatics drill
Rock band concert in front of speakers
Gunshot blast, Jet plane
Rocket launching pad
-Information courtesy of the Deafness Research Foundation
7
Getting Started
What’s in the box?
• LightShow Magic
• Remote
• Microphone
• XLR to 1/4” Cable
• Power Adapter
8
Features
Features:
-
Strobelight that pulses to the sound of your music
LED Moonflower Disco ball light with multi-color selection
Mid-size woofer with RGB background light
50 watt RMS
BLUETOOTH/USB/FM tuner/3.5mm Line in
2 mic inputs with digital echo and volume knobs
3.5Ah rechargeable battery for 2-5 hours of continuous usage
Built-in handle & wheels for ease of transportation
9
Getting Connected
CONNECTING A MICROPHONE
1. Plug a microphone (one microphone is included) into the MIC 1 or MIC 2 JACK.
The mic output will be mixed with an audio source from CD/CD+G/USB flash drive.
2. Slide ON/OFF switch on microphone to “ON” before singing and always slide to “OFF” after use.
1
2
CAUTION - Tapping or dropping the microphone while it is on can cause permanent damage to it. Never grip and swing
the microphone around by the connecting cord.
10
Getting Connected
SINGING ALONG FROM LINE IN SOURCES
This karaoke unit features a Line In jack for connecting your iPod, MP3 player or other digital music player.
• Connect the headphone jack of your external device to the Line In jack located on the lower side of this unit
(The connection cable is not included).
• Turn on the unit player and it will enter the Line In function mode once an external device is plugged into the
Line In jack.
• Connect the line out or headphone jack of your external audio device (e.g. a CD player, MP3 player, iPhone,
iPod, etc…) to the unit with a suitable audio cable (not included).• Select your favorite song on your external
audio device to play. You may need to adjust the output volume of your external audio device if the headphone
jack is used for making the connection.
• Turn on your microphone and start singing. Adjust the MASTER VOLUME and/or MIC VOLUME if necessary.
You may also use the ECHO CONTROLS to enhance your singing experience.
• Turn off both devices after use.
NOTE: Once the Line In jack has been plugged into, the unit automatically enters the Line In mode no matter what
position the Function Selector is in. Remember to disconnect the Line In cable from the unit after use in order to listen
to the CD or USB input again.
11
Getting Connected
SINGING ALONG WITH USB FLASH DRIVE using DIGITAL FILES
1.
2.
3.
4.
5.
Insert a USB Flash drive
Set the MODE SELECTOR to “USB.”
Cycle through your MP3 files by using the buttons
Press the button to start playing the selected file
Plug in a Microphone and sing away
All control functions will now apply to the USB drive
* Flash drive memory stick with a memory capacity of 32GB or higher may take longer to load or may not be
compatible at all with this particular system.
12
Getting Connected
Connecting via BLUETOOTH
NOTE:
Bluetooth devices need to be initially paired first before they can exchange data. Once paired, it is not necessary to
pair them again. Simply turn your phone/tablet Bluetooth transmission to ON.
• Place the devices to be paired within 1 meter (3 feet) of each other when pairing.
• Press the Mode Select button to toggle the
Bluetooth Input.
• Search for available Bluetooth devices on your
music source
• When the Bluetooth input mode is selected,
LightShow Magic will automatically be
discoverable
• Select LightShow Magic to connect.
• An audible blip will be heard through the internal
speaker once a connection is made
• Some source devices are unable to display lists of detected devices. To pair this unit with the source device,
refer to the source device operating manual for details
• Select “Light Show Magic” from the source list. If Passcode is required, enter “0000”. * Passcode may be
called PIN Code, Passkey, PIN number or Password.
Bluetooth Devices
• LightShow Magic
• LightShow Magic
Passcode:
0000
13
Descriptions and Functions
1. Power/Volume Knob -- Turn this knob clockwise to power on unit and increase overall volume. Turn this knob
counter-clockwise to decrease overall volume and to eventually power off the unit.
2. MIC Volume --- This knob alters the volume of the microphones plugged into the MIC 1 and MIC 2 input jacks.
3. Echo -- This knob controls the amount of echo effect (delay/repeat) applied to the microphone input signal.
4. Light Mode -- Press this button to cycle through the various lighting effects.
5. MIC 1 -- Connect a 1/4” unbalanced microphone here.
MIC 2 -- Connect a 1/4” unbalanced microphone here.
6. DC 15v IN – Connect the provided power adapter here for recharging.
7. Bluetooth Disconnect -- Press this button to conveniently and instantly disconnect the LightShow Magic from any
previously paired devices.
8. Mode -- Press this button to cycle between available audio input sources.
9.
-- Press this button to return to a previous track on a CD or USB drive. This button also cycles through radio
tuner channels.
10.
-- Use this button to start playback. Press once to start playback, once again to set the pause mode, and once
more to resume playback. This button also auto scans for radio tuner channels.
11.
-- Press this button to skip forward to the next track when using the CD or USB input. This button also cycles
through radio tuner channels.
12. Line In – Connect an auxiliary audio input source here via 1/8” jack male connector.
13. Charging – This light indicates the charging status of the LightShow Magic battery.
14. USB – Connect a USB flash-drive here in order to play digital files.
14
Descriptions and Functions
7
8
9
1
2
3
4
5
6
10
11
12
13
14
15
Descriptions and Functions
1. Mute -- Mutes all audio.
2. Direct Access -- For use whenever number input is necessary. i.e.
Jumping directly to tracks/chapters, etc
3. EQ -- Cycles through different audio dynamics.
4. Repeat -- Repeats current playing track.
5. Mode -- Press this button to cycle between available audio input sources.
6. CH -- Use to cycle through radio channels.
7.
-- Use these buttons to return to a previous track or skip forward to the next track when using the CD or
USB input.
8.
-- Use this button to start playback. Press once to start playback, once again to set the pause mode, and once
more to resume playback. This button also auto scans for radio tuner channels.
9. Volume -- Use these buttons to decrease or increase volume.
16
Troubleshoot
There is no power
• Make sure the power cord is firmly connected to the back of the unit and to the power outlet.
• If using a power strip/surge-protector, make sure that it is plugged in and switched on.
• If attempting to run on battery power, the battery may be depleted. Connect the unit to a wall outlet and
recharge the battery.
• Check the fuse, and replace if blown. If the fuse blows again immediately, do not replace it again. Instead,
contact VocoPro technical support.
There is no sound
•
•
•
•
Make sure the MASTER VOLUME knob is set to an audible level.
If using microphones, make sure they are connected properly and cables are not defective.
If using an external player, make sure they are connected properly and cables are not defective.
If an external effects device is connected, make sure it is powered on.
No Audio from Bluetooth Connection
• Make sure the LightShow Magic is still paired.
• If need be, repeat the process to pair your Bluetooth device.
• Make sure you are within operating range.
The operating range is approximately 30 ft. If you are in excess of 30 ft from the LightShow Magic, the signal
may cut-out or drop. Also try and limit any obstructions to line of sight.
• Check the volume levels.
17
LightShow Magic Owner’s Manual
© VocoPro 2017
v1.1214
www.vocopro.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement