Owner&#39

Owner&#39
Introduction
DIGITAL VIDEO
Connections
DVD PLAYER
Basic playback
SD7200KU
SDK990KU
Advanced playback
Function setup
OWNER’S MANUAL
The model number and serial number are on the back of
your DVD Player. Record these numbers in the spaces
below. Refer to these numbers whenever you communicate
with your Toshiba dealer about this DVD Player.
Model number:
Serial number:
© 2009 Toshiba Corporation
Others
2
11
16
19
29
35
Introduction
SAFETY PRECAUTIONS
CAUTION: VISIBLE LASER RADIATION WHEN
OPEN. DO NOT STARE INTO BEAM.
AVIS
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with an arrowhead symbol, within the
equilateral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within the equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in this owner’s manual.
The symbol for Class
(Double lnsulation)
CLASS 1
LASER PRODUCT
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT
OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC POWER OUTLET,
THEN FULLY INSERT.
WARNING:
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as
vases, shall be placed on the apparatus.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future
reference. Should the unit require maintenance, contact an authorized service location.
Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications to this unit not expressly approved by Toshiba, or parties authorized by Toshiba,
could void the user authority to operate the equipment.
Warnings:
• The main plug is used as disconnect device and it should remain readily operable during intended used.
In order to disconnect the apparatus from the mains completely, the main plug should be disconnected
from the mains socket outlet completely.
• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilations.
• The ventilation should not be impeded by covering the ventilation openings with items such as newspaper,
table-cloths, curtains, etc.
• No naked flame sources such as lighted candles should be placed on the apparatus.
• The use of apparatus in moderate climates.
ENERGY STAR® qualified DVD. Products that earn the ENERGY STAR
prevent green house gas emissions by meeting strict energy efficiency
guidelines set by the U.S. Environmental Protection Agency and the U.S.
Department of Energy. ENERGY STAR and the ENERGY STAR mark are
registered U.S. marks.
2
IMPORTANT SAFETY INSTRUCTIONS
9.
10.
11.
12.
13.
14.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Portable Cart Warning
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Introduction
1.
2.
3.
4.
5.
6.
7.
8.
ADDITIONAL SAFETY INSTRUCTIONS
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
16. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled with
liquid, or candles on top of the unit.
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
18. Do not place anything on top of this unit.
19. Do not place the apparatus on amplifiers or equipment that may produce heat.
20. Never block or cover the slots or openings in the unit.
Never place the unit:
• on a bed, sofa, rug or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.
The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation.
21. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury
and apparatus malfunction.
22. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet. Wait
until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
23. During thunderstorms, do not touch the connecting cables or the apparatus.
24. Warning: To prevent spread of fire, keep candles or other open flames away from this product at all times.
Location of the required label
The rating plate and the safety caution are
on the rear of the unit.
3
Introduction
Precautions
Notes on handling
When shipping the DVD player, the original shipping
carton and packing materials come in handy. For
maximum protection, repack the unit as it was originally
packed at the factory. Take care not to give it a shock
or shake when carrying.
Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic products
in contact with the DVD player for a long time. They will
leave marks on the finish.
The top and rear panels of the DVD player may become
war m after a long period of use. This is not a
malfunction.
When the DVD player is not in use, be sure to remove
the disc and turn off the power.
If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
Notes on locating
Place the DVD player on a level surface. Do not use it
on a shaky or unstable surface such as a wobbling
table or inclined stand. The loaded disc may come off
the proper position and cause damage to the DVD
player.
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD
player away from the TV, radio, or VCR.
Notes on moisture condensation
Moisture condensation damages the DVD player. Please
read the following carefully.
Moisture condensation occurs, for example, when you pour
a cold drink into a glass on a warm day. Drops of water
form on the outside of the glass. In the same way, moisture
may condense on the optical pick-up lens inside this unit,
one of the most crucial internal parts of the DVD player.
Moisture condensation occurs during the following
cases.
When you bring the DVD player directly from a cold
place to a warm place.
When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD player in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it
dry.
Do not use any type of solvent, such as thinners and
benzene, as they may damage the surface of the DVD
player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Inspection and Maintenance
This DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts become dirty
or worn down, the picture quality may be reduced. To
avoid reduction in picture quality, it is recommended that
regular inspection and maintenance (cleaning or parts
replacement) be performed every 1,000 hours of use. For
further details, contact your nearest consumer electronics
dealer.
4
Do not use the DVD player when moisture condensation
may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player, and leave it for two or
three hours. After two or three hours, the DVD player
will have warmed up and evaporated any moisture. Keep
the DVD player connected to the wall outlet and
moisture condensation will seldom occur.
Notes on Discs
Structure of disc contents
Do not touch the playback side of the disc.
Introduction
On handling discs
Normally, DVDs are divided into titles, and the titles are
sub-divided into chapters. VIDEO CDs and audio CDs are
divided into tracks.
DVD
DVD
Title 1
Playback side
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Do not attach paper or tape to discs.
VIDEO CD/audio CD
VIDEO CD/audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc clean.
Each title, chapter or track is assigned a number, which is
called “title number”, “chapter number” or “track number”
respectively.
There may be discs that do not have these numbers.
Notes on copyright
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for
vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
The unauthorized recording, use, distribution, or revision
of copyrighted materials including, without limitation,
television programs, videotapes, and DVDs, is prohibited
under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual proper ty r ights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
5
Introduction
Notes on Discs (continued)
About this owner’s manual
This owner’s manual explains the basic instructions of this
DVD player. Some DVDs are produced in a manner that
allows specific or limited operation during playback. As
such, the DVD player may not respond to all operating
commands. This is not a defect in the DVD player. Refer
to instruction notes of discs.
” may appear on the TV screen during operation.
“
” means that the operation is not permitted by the
A“
DVD player or the disc.
Playable discs
This DVD player can play the following discs.
Disc Mark
Contents
Disc
Size
Approx. 4 hours
(single sided disc)
Audio
+
video
(moving
pictures)
DVDs
12 cm
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
About
icons on the heading bar show the playable
The
discs for the function described under that heading.
DVD : You can use this function with DVD discs.
: You can use this function with Video CDs.
: You can use this function with Audio CDs/CD-R/RW
CD
CDs.
Notes on region numbers
VIDEO
CDs
DIGITAL VIDEO
Audio
CDs
Audio
+
video
(moving
pictures)
Audio
The region number of this DVD player is 1. If region
numbers, which stand for their playable area, are printed
on your DVD and you do not find
or
, disc playback
will not be allowed by the player. (In this case, the DVD
player will display a message on-screen).
SUPER
VIDEO
CDs
On VIDEO CDs
This DVD player supports VIDEO CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback variations
depending on types of discs.
• VIDEO CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this DVD player in
the same way as an audio CD.
• VIDEO CD equipped with PBC function (Version 2.0)
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s manual
may not work with some discs.
6
Maximum
playback time
DivX®
SUPER VIDEO
Audio
+
video
(moving
pictures)
Audio
+
video
(moving
pictures)
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD
single)
Approx. 20 minutes
12 cm
35 min.
8 cm
10 min.
12 cm
8 cm
It depends on DivX®
quality
The following discs are also available.
DVD±R/±RW and DVD-ROM discs of DVD format
CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA or
JPEG format
Official DivX® Certified product
Plays all versions of DivX® video (including DivX® 6) with
standard playback of DivX® media files
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play DVD-RAM discs or non-standardized discs,
etc., even if they may be labeled as above.
• This DVD player uses the NTSC color system, and cannot
play DVDs recorded in any other color system (PAL, SECAM,
etc.).
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture of
DVD and CD discs, Toshiba cannot assure that this DVD player
will successfully play every disc bearing the DVD and CD logos.
If you happen to experience any difficulty playing a DVD and/
or CD disc on this DVD player, please contact Toshiba Customer
Service.
is a trademark of DVD Format/Logo Licensing Corporation.
Table of Contents
Introduction
Advanced playback
2
3
4
5
Accessing a Specific Location Directly ........... 19
Locating a specific title/chapter/time ................... 19
Repeating a Specific Segment ................. 20
Repeating a specific segment ............................ 20
Notes on region numbers ................................... 6
Playing in a Varied Order ......................... 20
Table of Contents ...................................... 7
Identification of Controls ......................... 8
Playing in a Favorite Order ...................... 21
Front panel .......................................................... 8
Rear panel .......................................................... 8
DVD display ........................................................ 8
Remote control .................................................... 9
Loading batteries ............................................... 10
Operating with the remote control ...................... 10
Playing titles, chapters or tracks in a varied order .. 20
Setting titles, chapters or tracks in a favorite order .... 21
Zooming a Picture .................................... 22
Zooming a picture ............................................... 22
Selecting the Sound Enhancement (E.A.M.)
.................................................................... 22
Selecting the sound enhancement ...................... 22
Selecting the Picture Enhancement (E.P.M) . 23
Connections
Selecting the picture enhancement ..................... 23
Connecting to a TV .................................. 11
Selecting Subtitles ................................... 23
Connecting to a TV ............................................. 11
Connecting to a TV (Using the component video
jacks) ................................................................. 11
Connecting to a display (Using a HDMITM cable) ......... 12
Selecting the Camera Angle .................... 24
Connecting to Optional Equipment ....... 13
Connecting to an amplifier equipped with a
Dolby® Digital decoder ......................................... 14
Connecting to an amplifier equipped with
Dolby Surround Pro Logic .............................. 14
Connecting to an amplifier equipped with a
DTS® decoder .................................................. 15
Connecting to an amplifier equipped with an MPEG2
audio decoder .................................................. 15
Connecting to an amplifier equipped with a
digital audio input ........................................... 15
Selecting a subtitle language .............................. 23
Changing the camera angle ................................ 24
Selecting a Language ............................... 24
Selecting a playback audio setting ..................... 24
On-screen Display Operation .................. 25
On-screen display operation .............................. 25
Playing MP3/WMA Files ........................... 26
Playing MP3/WMA files ...................................... 26
Viewing JPEG Files .................................. 27
Viewing JPEG files ............................................ 27
Viewing a thumbnail view ................................... 27
Playing DivX®/MPEG-4 Files .................... 28
Playing DivX®/MPEG-4 files ............................... 28
Basic playback
Playing a Disc .......................................... 16
Function setup
Basic playback ................................................ 16
Customizing the Function Settings ........ 29
Variable Speed Playback ......................... 17
Setting procedure ............................................... 29
Setting details ..................................................... 29
Playing in fast reverse or fast forward directions ..
Playing frame by frame ....................................
Playing in slow-motion ......................................
Resuming playback from the same location .....
Introduction
SAFETY PRECAUTIONS ...........................
IMPORTANT SAFETY INSTRUCTIONS ....
Precautions ...............................................
Notes on Discs ..........................................
17
17
17
17
Locating a Desired Section .................... 18
Locating a title using the top menu ..................... 18
Locating a specific chapter or track .................. 18
Others
Table of Languages ...................................
Before Calling Service Personnel ...........
Specifications ...........................................
Limited Warranty ......................................
35
36
37
38
7
Introduction
Identification of Controls
See the page in
for details.
Front panel
16
16
10
HDMI SELECT
12
8
16
HDMI indicator
12
16
16
Rear panel
11
Power Cord
HDMI OUT
jack
12
11
Y
VIDEO
PB
PR
VIDEO OUT
AUDIO
OUT
HDMI OUT
R
ANALOG
L
COAXIAL DIGITAL
14
15
11
DVD display
The indicators vary depending on the kinds of discs you play.
8
No disc
Bad disc
Bad disc
OPEN
LOAD/CLOSE
DVD VIDEO
VIDEO CD
Audio CD
Picture
• During playback:
Example
• During playback:
Example
• During playback:
Example
Some discs may only
display chapter numbers.
Some discs may only
display track numbers.
Some discs may only
display track numbers.
Power off
Chapter/Track
number Indicator
• During thumbnail
viewing
Multifunctional indicator
(indicates operating
status or messages, etc.)
Remote control
Introduction
The instructions in this manual describe the functions on the remote control. See the page in
for details.
16
16
19
19
22
17
23
23
24
24
16
16
17
18
18
17
17
18
18
25
16
18
20
25
19
* 16
16
21
20
29
22
12
* RETURN button
Return to menu display for VCD (2.0) discs with
menu.
HDMI button 12
* MENU button
Use the MENU button to display the menu included on
many DVDs. To operate a menu, follow the instructions
in “Locating a title using the top menu.” 18
9
Introduction
Identification of Controls (continued)
Loading batteries
1
Open the cover.
2
Insert batteries (R03/AAA size).
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle:
About 30° in each direction of the front of
the remote sensor
Make sure to match the + and – on the batteries
to the marks inside the battery compartment.
Caution
Never throw batteries into a fire.
Notes
• Be sure to use R03/AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental aspects of
battery disposal.
• Do not mix different battery types or combine used batteries
with new ones.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace both batteries
with new ones.
• If the batteries are dead or if you will not be using the remote
control for a long time, remove the batteries to prevent
battery acid from leaking into the battery compartment.
10
* Do not expose the remote sensor of the DVD player
to a strong light source such as direct sunlight or
other illumination. If you do so, you may not be able
to operate the DVD player via the remote control.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
player.
• When using the remote control, press the buttons at intervals
of about 1 second to ensure the correct mode of operation.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote control.
• Do not open the remote control.
• If the remote control is not going to be used for a long
time, remove the battery to avoid damage caused by
battery leakage corrosion.
CAUTIONS:
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Do not dispose of battery in fire; battery may explode or leak.
• When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal of
these batteries must be strictly followed.
Connections
Connecting to a TV
Connect the DVD player to your TV.
Connecting to a TV
PB
Connections
Y
VIDEO
PR
VIDEO OUT
Normal TV
HDMI OUT
AUDIO
OUT
R
ANALOG
L
COAXIAL DIGITAL
To VIDEO
OUT
(yellow)
To 2ch AUDIO OUT
(R: red, L:white)
• Make the following setting.
To audio
input
To video
input
(yellow)
On-screen display
Audio/Video cables (supplied)
Select:
“Video Out”
Page
“Off”,
“PCM” or
“Raw”
32
Component
P-Scan
HDMI
31
“Digital Output”
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied) and
then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback
picture may be distorted as DVDs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
Connecting to a TV (Using the component video jacks)
Interlaced outputs (ColorStream®)
Progressive outputs (ColorStream Pro®)
Some TVs or monitors are equipped with component video inputs.
Connecting to these inputs allows you to enjoy higher quality
picture playback.
Actual labels for component video inputs may vary depending on
the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
In some TVs or monitors, the color levels of the playback picture
may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
Some TVs or monitors are equipped with component video inputs
that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest
quality pictures with less flicker.
Consumers should note that not all high definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 480 progressive scan picture
problems, it is recommended that the user switch the connection to
the “standard definition” output. If there are questions regarding our
TV set compatibility with this model 480p DVD player, please contact
our Customer Service Center.
To Y video
input
To PB video
input
Y
VIDEO
PB
PR
VIDEO OUT
To PR video
input
To audio input
HDMI OUT
AUDIO
OUT
R
ANALOG
L
COAXIAL DIGITAL
To 2ch AUDIO OUT
(R: red, L:white)
Audio cable (not supplied)
Component video cable (not supplied)
11
Connections
Switching the output signal (interlaced / progressive)
using the remote control
• Make the following setting.
On-screen display
You can temporarily switch the output signal for better picture quality.
Press PROGRESSIVE button repeatedly on the remote control to
select Video Output to P-Scan mode during stop.
“Digital Output”
If your TV does not support the progressive scan format, the picture
will appear scrambled or blank. To return to normal picture, press
PROGRESSIVE button repeatedly to turn off progressive mode.
“Video Out”
Select:
“PCM” or
“Raw”
Component
*P-Scan
(Progressive)
Page
32
31
* Only for TV equipped with component video
Notes
input jacks which support the progressive scan.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player away from
the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.
Otherwise, high volume sound may damage your hearing as well as the speakers.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may
be damaged.
• Analog audio out will not have sound if DTS playback is selected.
• ColorStream® and ColorStream Pro® are registered trademarks of Toshiba America Cousumer Products L.L.C.
Connecting to a display (Using a HDMITM cable)
Y
VIDEO
PB
PR
VIDEO OUT
HDMI OUT
AUDIO
OUT
R
ANALOG
L
COAXIAL DIGITAL
To HDMI
Output
Available output signals are below:
• Auto
• 480p (progressive)
• 720p (progressive)
• 1080i (interlaced)
• 1080p (progressive)
HDMI Cable
HDMI-compatible display
Switching the video quality (HDMI mode) using HDMI
button on the remote control or HDMI SELECT button on
the front panel.
Press HDMI button on the remote control or HDMI SELECT button
on the front panel to receive a suitable video quality in STOP mode.
The video quality is required to match your TV having HDMI feature
and suitable quality. Please also check your TV owner’s manual.
Press this button to change the output signals as below. See the
HDMI indicator and select the appropriate output signal.
HDMI indicator
illuminates “ • 1080p ”
Video output signal
1080p (progressive)
Press
illuminates “ • 1080i ”
1080i (interlaced)
Press
illuminates “ • 720p ”
720p (progressive)
Press
illuminates “ • 480p ”
480p (progressive)
• Make the following setting.
On-screen display
Select:
Page
“Digital Output”
“PCM”
32
“Video Out”
HDMI
31
About HDMI
HDMI (High Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in
one specification. HDCP is used to protect digital content
transmitted and received by DVI-compliant or HDMI-compliant
displays.
HDMI has the capability to support standard, enhanced, or highdefinition video plus standard to multi-channel surround-sound
audio. HDMI features included uncompressed digital video, a
illuminates “• 480p, • 720p,
Auto
bandwidth of up to 2.2 gigabytes per second (with HDTV) signals, one
• 1080i, • 1080p”
connector (instead of several cables and connectors), and
Press
communication between the AV source and AV devices such as
480p, 720p, 1080i and 1080p are signals created with this DVD DTVs.
Player from original 480i signal. The resolution of the picture may HDMI, the HDMI logo and High-Definition Multimedia Interface are
not be increased even if they are selected.
trademarks or registered trademarks of HDMI licensing LLC.
Press
12
Connections
Content of the output for each output jack is shown in the following table and differ depending on the On-Screen Display Setting:
On-Screen Display Setting
Content of output for each output jack
"Video Out"
HDMI Output
Video
Component
Setting
Setting *
Output
Output
Output
Component
Invalid
HDMI
-
Composite
480i
(Interlaced)
P-Scan
Invalid
-
Composite
480p
(Progressive)
480p
480p
Composite
480p
720p
720p
Composite
480p
1080i
1080i
Composite
480p
1080p
1080p
Composite
480p
Note: Both Composite (Video) and Component do not have output when HD JPEG Mode is on 32 , except 480p video resolution
mode. You may view photos (JPEG ) through HDMI connection. To watch disc playback through Composite and Component
output, set HD JPEG Mode to “Off”.
* Settings for HDMI output format are performed using the HDMI button on the remote control or HDMI SELECT button on the
front panel.
Notes
• If Auto is selected, it follows preference HDMI aspect ratio of TV.
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making
any connections.
• If you have a HDMI (with HDCP) equipped monitor or display, you can connect it to this player using a HDMI cable.
• The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible
with, including DVD-Video, Video CD/Super VCD, CD, WMA, MP3 and DivX®.
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) depending on the component you
have connected. Using a HDMI connection may result in unreliable signal transfers.
• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this
DVD player.
• When using HDMI cable, do not connect to other analog video outputs.
• No sound will be output from the HDMI cable if the digital out is not set to PCM.
• HDMI output is only available when the Video Output is set to “HDMI”. Otherwise the HDMI button is invalid.
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
• For connection to your TV, see “Connecting to a TV” .
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Warning
• When you are connecting (via the COAXIAL DIGITAL AUDIO
OUT jack) an AV decoder that does not have Dolby Digital,
Digital Theater Systems (DTS) or MPEG2 decoding function,
be sure to set “Digital Output” to “PCM” from the on-screen
displays. Otherwise, high volume sound may damage your
hearing as well as the speakers.
• When playing DTS-encoded discs (DVDs and audio CDs),
excessive noise may be output from the analog audio output
jacks. To avoid possible damage to the audio system, you
should take proper precautions when the analog audio output
jacks of the DVD player are connected to an amplification
system. To enjoy DTS Digital Surround™ playback, an external
5.1 channel DTS Digital Surround™ decoder system must be
connected to the COAXIAL DIGITAL AUDIO OUT jack of the
DVD player.
Notes
• Do NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This
input on your A/V Receiver is reserved for Laser disc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack
of the DVD player.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL (COAXIAL)” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
13
Connections
HDMI
Connections
Connecting to Optional Equipment (Continued)
Connecting to an amplifier equipped with a Dolby® Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest Manufactured under license from Dolby
movies, and is now available to reproduce this realistic effect in the home. You can Laboratories. Dolby and the double-D
enjoy motion picture and live concert DVDs with this dynamic realistic sound by symbol are trademarks of Dolby
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital Laboratories.
decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder,
you will obtain the full benefit of Pro Logic from the same DVD movies that provide • Use DVDs encoded via the Dolby
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Digital recording system.
• Make the following setting.
Surround mark.
Amplifier equipped with a
Dolby Digital decoder
To COAXIAL
type digital
audio input
To wall
outlet
On-screen display
Select:
Page
“Digital Output”
“PCM” or
“Raw”
32
To COAXIAL
DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting • Make the following setting.
an amplifier and speaker system (right and left front speakers, a center speaker, On-screen display
Select:
and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier
equipped with a Dolby® Digital decoder.” Refer to that amplifier’s owner’s manual
and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
“Digital Output”
“PCM” or
“Raw”
Page
32
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
* Connect one or two rear speakers.
The output sound from the rear speakers will
be monaural even if you connect two rear
speakers.
Amplifier equipped with
Dolby Surround Pro Logic
To audio
input
To wall
outlet
To ANALOG
AUDIO OUT
Audio cable (not supplied)
14
Connections
Connecting to an amplifier equipped with a DTS® decoder
Amplifier equipped with a
DTS decoder
To COAXIAL
type digital
audio input
To COAXIAL
DIGITAL
AUDIO OUT
To wall
outlet
75 Ω coaxial cable (not supplied)
Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending. DTS
and DTS Digital Out are registered
trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. ©
1996-2008 DTS, Inc. All Rights Reserved.
• Use DVDs or audio CDs encoded
via the DTS recording system.
• Make the following setting.
On-screen display
Select:
Page
“Digital Output”
“Raw”
32
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVDs with dynamic realistic sound • Use DVDs encoded via the MPEG2
by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2
recording system.
audio processor.
• Make the following setting.
Amplifier equipped with an
MEPG2 audio decoder
To COAXIAL
type digital
audio input
To wall
outlet
On-screen display
Select:
Page
“Digital Output”
“PCM” or
“Raw”
32
To COAXIAL
DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an • Make the following setting.
amplifier equipped with a digital audio input and speaker system (right and left front
On-screen display
Select:
speakers).
“Digital Output”
“PCM”
Page
32
Amplifier equipped with
a digital audio input
To COAXIAL
type digital
audio input
To wall
outlet
To COAXIAL
DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
15
Connections
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for
home use, on DVDs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
channel DTS encoded sound tracks on DVDs or audio CDs.
Basic playback
Playing a Disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the
video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio
system, turn on the audio system and select the input
connected to the DVD player.
1
Press the ON/STANDBY button on the
front panel or the POWER button on the
remote control.
POWER
2
3
The DVD player turns on.
Press OPEN/CLOSE.
Occasionally, some picture noise not usually visible during
a normal broadcast may appear on the TV screen while
playing a DVD because the high resolution pictures on these
discs include a lot of information. While the amount of noise
depends on the TV you use with this DVD player, you should
generally reduce the sharpness adjustment on your TV when
viewing DVDs.
To start playback in the stop mode
Press PLAY.
To pause playback (still mode)
The disc tray opens.
Press PAUSE/STEP during playback.
To resume normal playback, press the
PLAY button.
• The sound is muted during still mode.
Place the disc on the disc tray.
With the playback side
down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the DVD
player to malfunction.
• Do not place a disc which is unplayable in this DVD
player.
4
To obtain a higher quality picture
Press OPEN/CLOSE to close the disc tray.
Playback starts.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
To turn the power off
If you insert a DVD that contains a top menu, a
to select the
menu may appear. Use / / /
title you want to view, then press ENTER to start
playback.
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD.)
Notes
• If the disc tray is holding a disc you have already played,
playback will begin from the location where you last stopped.
For resuming playback, see 17 .
• Some video CD are recorded with PBC (Playback Control), a menu
with recorded contents may appear on the TV if you have turned
the PBC on. You can make your selection according to its PBC
menu. Press the PBC button on the remote control to turn PBC on
or off anytime during Video CD playback. When switching from
PBC off to PBC on mode, playback will start from the beginning of
the disc. To turn on the menu display again, press the RETURN
button.
16
Press ON/STANDBY on the front panel or POWER
button on the remote control to turn the unit off.
Automatic Power Off function
If the DVD player is stopped, or the screen saver is
engaged for approximately 20 minutes, the DVD player
will automatically turn itself off.
Notes
• Do not move the DVD player during playback. Doing so may
damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do
not push the disc tray while it is moving. Doing so may cause the
DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than discs
on the disc tray. Doing so may cause the DVD player to malfunction.
• In many instances, a menu screen will appear after playback of a
movie is completed. Prolonged display of an on-screen menu
may damage your television set, permanently etching that image
onto its screen. To avoid this, be sure to press the STOP button on
your remote control once the movie is completed.
Variable Speed Playback
You can play discs at various speeds, and resume playback from the location where you stopped playback.
Playing in fast reverse or fast forward directions
To resume normal playback
Press REV or FWD during playback.
Press PLAY.
REV: Fast reverse playback
FWD: Fast forward playback
Notes
• The DVD player mutes sound and subtitles during reverse
and forward scan of DVDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE/STEP during still playback.
To resume normal playback
Press PLAY.
Each time you press the PAUSE/STEP
button, the picture advances one
frame.
Note: The sound is muted during frame by frame playback.
Playing in slow-motion
Press SLOW during playback.
To resume normal playback
Press PLAY.
Each time you press the SLOW
button, the slow-motion speed
changes in the following sequence:
Notes
• The sound is muted during slow-motion playback.
• 3 speeds are available.
Resuming playback from the same location
1
Press STOP at the location where you
want to interrupt playback.
The DVD player memorizes the
location where playback is stopped.
2
Notes
• There may be a difference in the location where playback
resumes depending on the disc.
• Settings you changed using the on-screen displays while
the DVD player keeps a location in the memory may function
only after the memory is cleared.
• Resuming playback does not work for VCD with PBC on.
Press PLAY.
The DVD player resumes playback
from the location where you stopped
playback.
17
Basic playback
Each time you press the REV or FWD
button, the playback speed changes.
Basic playback
To start playback from the beginning regardless of the location where you stopped playback.
1 Press STOP twice.
• If you want to return to the
beginning of a DVD, open
and close the disc tray once
with the OPEN/CLOSE
button before pressing the
PLAY button.
The DVD player deletes the memory of the location.
2 Press PLAY.
Playback starts from the beginning of the current title.
Playback starts from the beginning of the disc.
Playback starts from the beginning of the current track.
Locating a Desired Section
Normally, DVDs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into
tracks. You can quickly locate any specific title, chapter, or track.
Locating a title using the top menu
1
Press TOP MENU.
The top menu appears on the TV
screen.
3
Press ENTER.
Playback starts from chapter 1 of the
selected title.
e.g.
2
Press
want.
/
/
/
to select the title you
If the titles in the top menu are assigned
a number, you can directly locate a
specific title by pressing its designated
number with the number buttons.
Notes
• The instructions above describe basic procedures which may
vary depending on the contents of the DVD. If different
instructions appear on the TV screen, follow those instructions.
• If you display the top menu during playback and press the TOP
MENU button again without selecting any title, the DVD player
may resume playback from the point where you first pressed
the TOP MENU button (depending on the actual DVD.)
• This method of locating a title is available only on a disc that
contains a top menu.
• Instruction notes of discs may refer to the button that displays
the top menu as TITLE button.
Locating a specific chapter or track
Press SKIP
or
repeatedly to access
the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or tracks.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick
successions, playback starts from the
beginning of the preceding chapter or track.
18
Note
• Some titles may not display chapter numbers.
Advanced playback
Accessing a Specific Location Directly
Locating a specific title/chapter/time
1
Press T.
Press / to select the Title/Chapter/
Track/Time.
e.g.
SEARCH
T
1
Track
Time
Disc Time
2
Press /
to locate.
2
00 : 00 : 00
Accessing the time using number buttons:
Just enter 2 digits in order.
The first two numbers you entered represent hours.
The second two numbers you entered represent
minutes.
The third two numbers you entered represent seconds.
Advanced playback
00 : 00 : 00
Accessing chapters/tracks using number
buttons:
For chapter/track numbers 10 to 19, press +10 once
and the number 10 appears then enter one digit.
Press ENTER.
For chapter/track numbers 20 to 29, press +10 twice
and the number 20 appears then enter one digit.
Press ENTER.
For example, if you want to select chapter/track 25,
first press +10 twice then press the number button
“5”. Then press ENTER.
to select a section you want
To set and play favorite bookmark during playback
e.g. When you want to locate a
chapter.
1. Press T twice, the display of Bookmark appears, then
press ENTER to mark the desired scene.
SEARCH
T
1
Bookmark
00 : 00 : 00
Or
Press the number buttons to enter title,
chapter (track) number or time.
2. Press ENTER to play the favorite bookmark.
To set other bookmarks.
Follow step 1 and move through the menu by pressing
the or button.
Press T again to remove this display.
3
Press ENTER.
Playback starts from the selected
section.
Notes
• Pressing the CLEAR button resets the numbers. To clear
the display, press the T button several times.
• For VCD with PBC on, accessing tracks using number
buttons does not work.
To cancel the Bookmark
Follow step 1, then press the CLEAR button to cancel the
bookmark. Move through the menu by pressing the or
button to cancel other bookmarks.
Notes
• Some discs may not work with marking operation.
• The marking is canceled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
19
Advanced playback
Repeating a Specific Segment
You can specify a desired segment and repeat it.
Repeating a specific segment
1
Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.
To resume normal playback
Press A-B RPT until RepAB Off is displayed.
A-B RPT
RepAB Off
A-B RPT
Rep A-
2
Press A-B RPT again at the end of the
segment (point B).
A-B RPT
The DVD player automatically returns to
point A and starts repeat playback of the
selected segment (A-B).
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles.
• You can specify a segment only within the current title or
track (VIDEO CD).
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.
Rep A-B
Playing in a Varied Order
You can play titles, chapters within a title, or tracks in a varied order.
For Audio CD, please see “Playing MP3/WMA files”
26
.
Playing titles, chapters or tracks in a varied order
1
Press PLAY MODE.
PLAY MODE
Press / button to select desired
features and then press ENTER button
to toggle desired mode.
e.g.
2
Press PLAY.
Press the PLAY button, the DVD
player starts playback in the selected
mode.
Play Mode
Mode
Repeat
Normal
: Off
To resume normal playback
Press ENTER until the Off/Normal is displayed.
Normal
Shuffle:
PBC:
Chapter:
Title:
Single:
All:
Off:
20
Shuffle
Chapter
PBC
(VCD only)
Title
Playbacks in random order.
Playbacks in PBC On mode (VCD only).
Repeats the current chapter.
Repeats the current title.
Repeats the current track.
Repeats the entire disc.
Resumes normal playback.
Single
Note
Some discs may not permit these operations.
Playing in a Favorite Order
You can combine your favorite titles, chapters or tracks and play them in the order you determine. You can program up to 12
selections into the memory (Memory playback).
Setting titles, chapters or tracks in a favorite order
1
Insert a disc and press MEMORY during
stop.
MEMORY
The following display appears.
e.g. DVD
Memory
To change the programmed selections
1. While the display appears on the TV screen, press
/ / / to move the highlighted bar to the item
you want to change, then press CLEAR.
2. Press number buttons to input the new title/chapter/
track number.
To cancel the programmed selections
Title Chapter
Play
Chapter number
Title number
To resume normal playback from memory
playback
Press MEMORY button.
Press / / / to move the highlighted bar to “Clear
All”, then press ENTER. All the input programs will be
cleared.
Press PLAY button to resume normal playback.
e.g. VCD
Memory
Play
All
Advanced playback
All
1. While the display appears on the TV screen, press
/ / / to move the highlighted bar to the item
you want to cancel.
2. Press CLEAR.
Normal playback will start from first location.
Track number
2
To program during playback
Select the items in the order you want by
pressing the number buttons.
Each time you press the / / / button, the
space is highlighted in turn. Highlight where you want
to enter, then press the corresponding number
buttons.
To select another chapter in the same title, you need
to select the title number.
To select tracks from a VIDEO CD/audio CD in order,
press the number buttons for the track.
3
If you press the MEMORY button during playback, a
programming display appears.
Follow steps 2 and 3.
Notes
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player
repeats the current memory playback.
• If you press the MEMORY button while the display appears
on the TV screen, the display disappears.
• The programmed selections will be cleared when you open
the disc tray or turn off the DVD player.
Press / / / to move the highlighted
bar to Play, then press the ENTER.
The DVD player starts memory
playback.
21
Advanced playback
Zooming a Picture
You can magnify areas within a picture.
Zooming a picture
To resume normal playback
Press ZOOM during normal, slow or still
playback.
The centre part of the image will be
zoomed in.
ZOOM
e.g.
Off is displayed.
ZOOM
2
Each time you press the ZOOM button, the magnification
level changes as follows:
1
Press ZOOM repeatedly until the
Original picture is restored.
2
3
Off
Notes
• Some discs may not respond to zoom feature, for example,
during VCD PBC On mode.
• During some scenes, the buttons may not work as described.
• Zooming does not work on subtitles or menus included on
DVDs.
• The magnification level varies depending on the picture size
you select.
Press the ZOOM button to select the magnification level.
Press the / / / buttons to view a different part of the
image. You may move the image from the centre position to
UP, DOWN, LEFT and RIGHT direction.
When you reach the edge of the image, the display will not
shift anymore in that direction.
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
Selecting the sound enhancement
1
To exit the audio enhancement selection
Press E.A.M.
E.A.M.
The sound enhancement will appear:
Leave the DVD player unattended for about a few
seconds after having made a selection.
3D effect
Press the E.A.M. button again, the sound enhancement
change to Off.
3D*:
To obtain expansive virtual surround sound effects
from two speakers.
To use this enhancement on sounds output from the
ANALOG AUDIO OUT jacks, be sure to set “Digital
Output” to “PCM”.
* Effective in playback of a DVD .
22
Notes
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD player is connected to an amplifier equipped
with Dolby Surround Pro Logic, select “3D effect”. Otherwise,
Dolby Surround Pro Logic may function differently than usual.
Selecting the Picture Enhancement (E.P.M.*)
You can easily select a preferred picture enhancement.
*E.P.M.: Enhanced Picture Mode
Selecting the picture enhancement
1
E.P.M
Press E.P.M. again.
The picture enhancement menu
appears.
Contrast
1
1
12
1
6
12
E.P.M
Note
Actual effect to picture may vary depending on the TV. Make
selection according to your preference.
Advanced playback
2
To exit the picture enhancement selection
Press E.P.M.
Select the picture enhancement by
pressing / , then press / to make
your selections.
Each time you press the
enhancement changes.
/
button, the picture
Selecting Subtitles
You can display subtitles on the TV screen and
select a subtitle language from those included on
the DVD.
Selecting a subtitle language
1
2
Press SUBTITLE during playback.
SUBTITLE
The current subtitle setting is
displayed.
Press SUBTITLE while the subtitle setting
is displayed on the TV screen.
Each time you press the SUBTITLE
button, the subtitle languages included
on the DVD change.
e.g.
e.g.
To turn subtitles on or off
1. Press SUBTITLE during playback.
2. Press SUBTITLE repeatedly until the
displayed.
Off
is
Notes
• Some DVDs are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function
to off.
• During some scenes, the subtitles may not appear
immediately after you select your desired.
• Some DVDs will allow you to make subtitle selections and
turn subtitles on or off only via the disc menu.
To turn off the subtitle setting display,
press the SUBTITLE button repeatedly
Off is displayed.
until
Notes
• When you turn on the DVD player or replace a disc, the player
returns to the initial default setting.
When you select a subtitle language which is not included
on the disc, the DVD player plays a prior language programmed
on the disc.
• During some scenes, the subtitles may not appear
immediately after you change the subtitle language.
23
Advanced playback
Selecting the Camera Angle
If the scene was recorded from multiple angles,
you can easily change the camera angle of the
scene you are watching.
Changing the camera angle
1
2
Press ANGLE while playing a scene
recorded with multiple angles.
ANGLE
Press ANGLE while the angle number
is displayed on the TV screen.
ANGLE
While playing a scene recorded with
multiple angles, press the ANGLE
button.
e.g.
Press the ANGLE button repeatedly
to change the scene to the next angle
in those recorded.
• About two seconds later, playback
continues from the new angle you
selected.
• If no button is pressed within 10
seconds, playback continues
without changing the current angle.
Number changes to show the number
of the current angle. (The maximum
number of possible angles is 9)
To resume normal playback
Press ANGLE repeatedly until the “
1/3
” is displayed.
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been recorded.
• If only one angle is recorded, “ 1/1 ” is displayed.
Selecting a Language
You can select a preferred language and sound
recording system from those included on the DVD.
Selecting a playback audio setting
1
Press AUDIO during playback.
AUDIO
The current audio setting is displayed.
e.g.
Recorded audio format number changes
sequentially. (The maximum number of
possible audio formats is 8.)
If the abbreviation of the language appears instead of
the language name, refer to the list of languages and
their abbreviations 35 .
2
Press AUDIO while the audio setting is
displayed on the TV screen.
AUDIO
Each time you press the AUDIO
button, the audio settings included on
the DVD change.
The audio setting display will disappear after a few
seconds.
24
Notes
• When you turn on the DVD player or replace a disc, player
returns to the initial default setting.
If you select a sound track which is not included on the disc,
the DVD player plays a prior sound track programmed on the
disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections
on the disc menu.
Selecting sound channels of VIDEO CDs
AUDIO
Press AUDIO repeatedly during
playback to hear a different audio
channel (Stereo, Left, Right or Mix).
On-screen Display Operation
When you turn on the on-screen display, you can view information on operational status and access features and settings.
On-screen display operation
Press NAVI.
NAVI
The following display appears.
e.g. When playing a DVD.
Select by pressing
/
then press ENTER to
access the feature.
Chapter number
00:30:34/01:00:52 1/1 5/12
Advanced playback
Elapsed time
Remaining time
Title number
Features
: To start playback.
: To pause playback.
: To stop playback.
: Playback starts from the beginning of the current
chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the preceding
chapter or track.
: To locate succeeding chapters or tracks.
Title number (Track number)
Chapter number
Elapsed time of the current title or track
Remaining time of the current title or track
Viewing the operational status
1. Press DISPLAY.
The following display appears.
Time counter
“PBC On” will
be displayed
when PBC is
on.
Elapsed time / remaining time of the current track
Elapsed time / remaining time of the current title
Time
Time
00:01:12 / 01:52:46
Title number
Chapter number
2. Press DISPLAY again.
Audio setting
D 2 Ch Eng
Subtitle setting
3. To turn off the display, press DISPLAY
again.
Bit rate (Mbit/s)
Amount of picture, sound and subtitle data
in the DVD transferred per second.
The larger the value is, the more data
processed, but this does not necessarily
insure better picture quality.
Angle setting
Bit rate
25
Advanced playback
Playing MP3/WMA Files
You can play MP3/WMA files that have been recorded on a CD-R or CD-RW on the DVD player.
Playing MP3/WMA files
Preparations
Play modes for MP3/WMA/CD/DivX®
®
• Make sure that a disc you want to play is compatible When you play MP3/WMA/CD/DivX , you are able to modify the
Play modes through the Toolkit which appears on the right of
with this DVD player.
/
buttons to navigate
below picture on the screen. Press
between the windows and / buttons to select files/tracks or
play mode items. Then press ENTER button. Please refer to below
steps to playback files/tracks in the Program view list:
1. Select Edit mode in the Toolkit then press ENTER button to
start edit mode.
Press OPEN/CLOSE to load the disc.
2. Select a file/track or more files/tracks you want in the original
view list with the ENTER button.
3. Select Add to program in the Toolkit then press ENTER. “ “
will disappear from the screen. It means that the files/tracks
you have selected already added into the program view list.
4. Select Program view in the
To stop playback, press STOP.
T01_Divx1.5Mbp.MP3
1/ 3
Toolkit then press ENTER to
T01_Divx1.5Mbp
open the files/tracks in the
T02_Divx3Mbps
Program view list that you
T03_Divx4Mbps
already selected in step 2.
5. Press PLAY to playback all
JPEG Preview
Selecting a specific time of the current track
files/tracks in the Program
1. Press T.
view list.
2. Enter the time to select a specific time you want to play.
The Toolkit has the following play mode items:
3. Press ENTER to begin playback of the selected time.
• Filter (Audio/Photo/Video): Sets file filters.
Filter is not applicable to Audio CD.
Notes
• Repeat (Off/Track/All):
• Letter of a file/folder name overflowing the given space are
Off: Resumes normal playback.
not displayed.
Track: Repeats the current track.
• You can play in fast reverse or fast forward during MP3/WMA
All: Repeats all files on the current folder or all tracks on the disc.
playback.
• Mode (Normal/Shuffle/Music Intro):
To pause playback
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
Press PAUSE/STEP during playback.
Music Intro: Only playbacks the first 10 seconds of all the
files on the current folder or all tracks on the disc.
To resume normal playback, press
• Edit mode: Memory operation works only when Edit mode is
the PLAY button.
selected. After finish storing the files/tracks you want into
the Program view list, select “Edit mode” again and press
Notes
ENTER to release edit mode.
• Some discs may not permit this operation.
• The COAXIAL DIGITAL AUDIO OUT jack outputs MP3/WMA • Program view: To view tracks/files in the Program view list.
sounds in the linear PCM format regardless of the current “Digital It is disabled when the Program view list is empty.
• Add to program: Add files/tracks to the Program view list. It
Output” selection.
is disabled if the Edit mode is not selected. (The maximum
• The SKIP function is also available.
number of files/tracks can be added is 30.)
• Browser view: To view files/tracks in the original view list.
Playable files
MP3/WMA disc compatibility with this player is limited as follows: • Clear program: Delete the files/tracks in the Program view
list. Select a file/track or more you want to delete in stop
• Playable discs:
CD-R (650MB / 74 min. only)
mode. “ “ will appear besides the deleted file/track. Select
CD-RW may not be compatible.
Clear program and then press ENTER. It is disabled if the
• Sampling Frequency:
44.1 kHz only
Edit mode is not selected.
• Bit rate:
MP3: 32 kbps - 320 kbps (CBR*)
WMA: 48 kbps - 192 kbps (CBR*)
This DVD player requires discs/recordings to meet certain technical
• CD physical format:
Mode 1, Mode 2 XA Form 1
standards in order to achieve optimal playback quality. Pre• File system:
ISO9660 Level 1, 2 or Joliet
recorded DVDs are automatically set to these standards. There
• File name:
A file name should be in alphabet and are many different types of recordable disc formats (including
numerals only, and must incorporate CD-R containing MP3/WMA files). Because this area of technology
“MP3” or “WMA” extension. e.g. is still evolving, Toshiba cannot guarantee that all recordable discs
“********.MP3”, “********.WMA”.
will produce optimal playback quality. The technical criteria set
• Total number of folders: Less than 256
forth in this owner’s manual are meant only as a guide.
• Total number of files:
Less than 1000
Please be advised that you must obtain permission from the
• WMA codec version:
V7 or V8 (Stereo sound only)
applicable copyright owners to download copyrighted content,
* CBR = Constant Bit Rate
including music files, in any format, including the MP3 formats,
Note: When the MP3/WMA file is out of the above specifications, prior to the downloading thereof. Toshiba has no right to grant and
does not grant permission to download any copyrighted content.
the song may be skipped or muted with counter moving.
1
2
Place a CD that contains MP3/WMA files
on the disc tray.
3
Repeat : Off
Mode
26
: Normal
Viewing JPEG Files
You can play JPEG files that have been recorded on a CD-R or CD-RW on the DVD player. You can select a preferred view: a
page of 9 thumbnail images or a single image view. Also, rotating, enlarging and shifting of each image can be possible.
To playback in HD JPEG resolution, see 32 .
Viewing JPEG files
Preparations
• Prepare a disc that contains JPEG files you want to view (see next page for Jpeg files compatibility). In Setup
Menu, it is preferred to select “Original” for “View Mode” 31 .
• Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function
settings via the on-screen displays of the DVD player. If the TV is adjusted to other sizes, e.g. “16:9”, images will
appear to be horizontally expanded. For details, refer to the owner’s manual of your TV.
1
Press OPEN/CLOSE to open the disc tray,
place a disc that contains JPEG files.
To resume normal playback
1/ 3
A list of files in the
disc
appears.
(Selection mode)
e.g.
Press the ZOOM repeatedly until the
ZOOM
Repeat : Off
Mode
: Normal
Off
is displayed.
• Original picture is restored when the
Off
appears.
• Depending on the file size, some files may
not display the entire image.
Advanced playback
Press OPEN/CLOSE to close the disc
tray. A list of folders/files will appear on
the screen.
Press the / / / buttons to view a different part of the
image. You may move the image from the centre position to
UP, DOWN, LEFT and RIGHT direction. When you reach the
edge of the image, the display will not shift anymore in that
direction.
To rotate an image
W: 515 H:770
During playback, press the / button repeatedly to rotate
the picture on the TV screen.
: rotate the picture anti-clockwise by 90o
: rotate the picture clockwise by 90o.
Press
/
button to select your
desired file, and then press ENTER or
PLAY button to star t slide show
playback 32 .
Press STOP to display a folder list.
Note: When you press / button to
select the left file, the selected picture
will appear at the lower right corner.
To set transition effect
During playback, press the ANGLE button to select the
transition effect: Wipe down transition, Wipe up transition,
... , No transition.
Note
The transition effect only works in 480p video resolution if the
HD JPEG Mode is set to “On”.
To quit the JPEG playback, press STOP.
• Pressing the OPEN/CLOSE button to open
the disc tray can also quit the playback.
To pause playback
Press PAUSE/STEP during playback
To resume normal playback, press
Viewing a thumbnail view
1
Press TOP MENU in full-screen review.
e.g.
PLAY.
To change the image
To view the succeeding image, press SKIP
To view the previous image, press SKIP
.
.
Press the / / / to select an
image, press PLAY to view one
image in full-screen and
automatically images will be
displayed one by one again in a few
seconds.
To magnify image
Press ZOOM repeatedly.
ZOOM
Each time you press the ZOOM button, the
magnification level changes as follows:
1
2
3
Off
Turn the page if necessary
Press SKIP
/
to view other thumbnail screen.
27
Advanced playback
JPEG files compatibility
Discs whose compatibility with this DVD player has been confirmed by TOSHIBA are as follows.
CANON QuickCD
Kodak Picture CD
FUJICOLOR CD
NORITSU QSS CD
JPEG disc compatibility with this DVD player is limited as follows:
• Playable discs:
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
• CD physical format:
Mode 1, Mode 2 XA Form 1
• File system:
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet and numerals only, and must incorporate “JPG”
extension.
e.g.“********.JPG” (Do not name the file with “JPE” or “JPEG” extension.)
• Total number of folders:
Less than 256
• Total number of files:
Less than 1000
Depending on the file size, some files may not display the entire image.
Some discs may not permit this operation. Especially, the following conditions of included files will increase the disc’s
disability.
1. Pixels over 2880 x 1920 in height and/or width
2. File size over 2M bytes
3. File format except Exif
Playing DivX®/MPEG-4 Files
You can play DivX® and MPEG-4 files that have been recorded on a CD-R or CD-RW on the DVD player.
Playing DivX®/MPEG-4 files
1
Press OPEN/CLOSE to open the disc
tray, place a disc that contains DivX® or
MPEG-4 files.
Press OPEN/CLOSE to close
the disc tray, after completion of
reading, a list of folders in the
disc will appear.
1/ 3
A list of folders in the disc
appears.
I
Repeat : Off
Mode
: Normal
Playable files
DivX® / MPEG-4 disc compatibility with this player is limited as
follows:
• Playable discs:
•
•
•
•
•
e.g.
•
•
Press / to select your desired
file, and then press ENTER or
PLAY button to start playback.
If your DivX ® files include the
subtitle file supported by this unit
(see 30 ), the “External Subtitle
File Selection” menu will appear,
use / to select one extension
and then press ENTER to start
playback.
Press STOP to display a folder list.
28
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
DivX® 3.11, 4.12, 5.0, 5.1
CBR MP3, VBR MP3, Mono MP3,
DivX® AC3
Enhance video:
GMC, Qpel, Progressive B-frames
Frame rate:
8 to 25 fps
CD physical format:
Mode 1, Mode 2 X A Form 1
File system:
ISO9660 Level 1, 2 or Joliet
File name:
A file name should be in alphabet and
numerals only, and must incorporate
“DIVX” or “AVI” extension.
e.g. “ *******.DIVX ”, “ *******.AVI ”
Total number of folders: Less than 256
Total number of files:
Less than 1000
• DivX® versions:
• Audio format:
Notes
• It is recommended to record the same kind of files in a CD-R or
CD-RW.
• Some DivX® Video-On-Demand files may require registration
code of your DVD player, you may get the code in Misc
settings 34 .
DivX, DivX Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
Customizing the Function Settings
You can change the default settings to customize performance to your preference.
Setting procedure
1
Setting details
Press SETUP during stop.
: English
Language
The following on-screen display
appears.
Language
: Off
: ASCII
DivX subtitle
: English
Language
: English
: English
DVD Menu
: Off
DivX subtitle
: ASCII
: English
DVD Menu
: English
Language
Language settings
Video settings
Audio settings
Rating settings
Misc settings
3
Press / to select the setting you want
to change, then press ENTER.
English: To view on-screen displays in English.
Français: To view on-screen displays in French.
Español: To view on-screen displays in Spanish.
1) Press SETUP button.
2) Press button to select Language.
3) Press ENTER button, then use the
select a preferred
language.
Language
4) Press ENTER
button.
DivX subtitle
5) Press SETUP
button to exit the
DVD Menu
menu.
Subtitle
4
Change the selection by / buttons, by
referring to the corresponding pages, then
press ENTER.
5
Repeat steps 3 and 4 to change other
settings.
6
Press SETUP.
To select another option, press
to go back to step 2.
The on-screen display disappears.
Note
To quit the procedure, press the SETUP button to turn off
the on-screen display.
/
button to
Español
DVD
English:
French:
Spanish:
Auto:
To display subtitles in English.
To display subtitles in French.
To display subtitles in Spanish.
To display subtitles in different languages other
than you selected.
Off:
To disable subtitles.
1) Press SETUP button.
button then use the
/
button to select
2) Press
Subtitle.
/
button to
3) Press ENTER button, then use the
select a preferred
language.
4) Press ENTER
button.
5) Press SETUP
button to exit the
menu.
Notes
• Some DVDs may be set to display subtitles in a different
language other than you selected. A prior subtitle language
may be programmed on the disc.
• Some DVDs allow you to change subtitle selections only via
the disc menu. If this is the case, press the MENU button and
choose the appropriate subtitle language from the selection
on the disc menu.
29
Function setup
2
Press
/
to select an option for the
setting you want to change, then press .
Function setup
Customizing the Function Settings (continued)
Setting details
DivX® Subtitle
Language
If your DivX® files include a subtitle file, then you may
select a supported DivX® subtitle language by region:
ASCII
Unicode
Turkish
Central European
Cyrillic
1) Press SETUP button.
2) Press button, then use the / button to select
DivX subtitle.
3) Press ENTER button, then use the
/
button to
select a preferred
DivX ® subtitle
Language
language.
: Off
4) Press ENTER
ASCII
DivX subtitle
button.
Unicode
5) Press SETUP
Turkish
button to exit the
DVD Menu
Central European
menu.
Cyrillic
: Off
: ASCII
DVD Menu
French
Spanish
Note
Some DVDs may not include your pre-selected language.
In this case, the DVD player automatically displays disc
menus consistent with the disc’s initial language setting.
Aspect Ratio
Video
: 16 : 9
: Auto Fit
Notes
• If your DivX® files do not include the subtitle file, you
cannot use this selection.
• Supported subtitle file formats:
.srt, .sub, .txt, .smi, .ssa.
Audio
DivX subtitle
Video Out
: HDMI
HDMI Resolution : Auto
HD JPEG Mode : On
JPEG Interval
: 5 seconds
DVD
English: To play sound tracks in English.
French: To play sound tracks in French.
Spanish: To play sound tracks in Spanish.
1) Press SETUP button.
2) Press
button, then use the
/
button to select
Audio.
3) Press ENTER button, then use the / button to select
a
preferred
language.
Language
4) Press ENTER
: Off
button.
: ASCII
DivX subtitle
5) Press SETUP
button to exit the
French
DVD Menu
menu.
Spanish
Aspect Ratio
DVD
1) Press SETUP button.
button to select Video.
2) Press /
3) Press
button, then use the
/
button to select
Aspect Ratio.
4) Press ENTER button, then use the / button to shift
and change the TV type.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
Video Out
HDMI Resolution : Auto
Note
Some DVDs may not be played in a different language than
you selected. A prior language may be programmed on the
disc.
DVD Menu
DVD
English: To display DVD Menus in English.
French: To display DVD Menus in French.
Spanish: To display DVD Menus in Spanish.
1) Press SETUP button.
2) Press
button, then use the
/
button to select
DVD Menu.
3) Press ENTER button, then the / button to select a
preferred language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
30
HD JPEG Mode : On
JPEG Interval
: 5 seconds
4:3
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill your TV
screen. Either or both sides of the picture
are cut off.
16:9
Select when a 16:9 TV is connected.
Notes
• The displayable picture size is preset on the DVD.
Therefore, the playback picture of some DVDs may not
conform to the picture size you select.
• When you play DVDs recorded in the 4:3 picture size
only, the playback picture always appears in the 4:3 picture
size regardless of the TV shape setting. But, if Video
Output is set to HDMI 720p/1080i/1080p, then picture
will be 16:9 only.
• If you select “16:9” and you own a 4:3 TV set, the DVD
playback picture will be horizontally distorted during
playback. Images will appear to be horizontally
compressed. Always be sure that your TV shape conforms
to the actual TV in use.
Video Out
1) Press SETUP button.
button to select Video.
2) Press /
3) Press
button, then use the
/
button to select
Video Out.
4) Press ENTER button, then use the / button to select
the output mode (Component, P-Scan or HDMI).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
: 16 : 9
: Auto Fit
Video Out
View Mode
P-Scan
DVD
HDMI Resolution
1) Press SETUP button.
button to select Video.
2) Press /
button, then use the
/
button to select
3) Press
View Mode.
4) Press ENTER button, then use the / button to select
the options (Fill, Original, Height Fit, Width Fit, Auto Fit
or Pan Scan).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
Video Out
HDMI Resolution
HD JPEG Mode
: 16 : 9
Height Fit
HDMI
HD JPEG Mode
JPEG Interval
: 5 seconds
Component:Select if you connect the DVD player to your
TV which has component video inputs.
P-Scan: Select if you connect the DVD player to your TV
which has component video inputs that support progressive
scan.
HDMI: High Definition Multimedia Interface. Select if you
connect the DVD player to TV via HDMI input.
HDMI Resolution
1) Press SETUP button.
button to select Video.
2) Press /
3) Press
button, then use the
/
button to select
HDMI Resolution.
4) Press ENTER button, then use the / button to select
the options (Auto, 480p, 720p, 1080i or 1080p).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Width Fit
Aspect Ratio
JPEG Interval
Video Out
Pan Scan
Select when a standard 4:3 TV is
connected. Displays pictures cropped to
fill your TV screen. Either or both sides
of the picture are cut off.
: 16 : 9
: Auto Fit
Auto
480p
HDMI Resolution
720p
HD JPEG Mode
1080i
JPEG Interval
1080p
Auto Fit
Automatically fit the decoded image on
screen without distortion. Black bars will
be present on top/bottom or left/right of
screen.
Note: Depending on the DVDs, you may not be able to view
the mode as selected.
Notes
• If the Video Out is not set to “HDMI”, you cannot select
the “HDMI Resolution”.
• Select the HDMI resolution according to the performance
of the connected TV.
31
Function setup
The user may select one of the following options:
Fill:
Fill the screen with decoded image.
Original: Display image as it original size. “Original” is
preferred for Jpeg viewing.
Height Fit: Fit the screen height with image height.
Width Fit: Fit the screen width with image width.
Auto Fit: Automatically fit the decoded image on screen
without distortion.
Pan Scan: Automatically display decoded image on full
screen without distortion.
Function setup
Customizing the Function Settings (continued)
Setting details
HD JPEG Mode
Digital Output
1) Press SETUP button.
2) Press /
button to select Video.
3) Press button, then use the / button to select HD
JPEG Mode.
4) Press ENTER button, then use the / button to select
On or Off mode.
5) Press
ENTER
: 16 : 9
Aspect Ratio
button.
: Auto Fit
6) Press
SETUP
Video Out
: HDMI
button to exit the
HDMI Resolution
menu.
On
HD JPEG Mode
Off
JPEG Interval
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press /
button to select Audio.
button, then use the
/
button to select
3) Press
Digital Output.
4) Press ENTER button, then use the / button to select
the output sound format (Off, PCM or Raw).
5) Press ENTER
button.
Off
6) Press SETUP
PCM
button to exit the
Raw
menu.
On: JPEG image is displayed in a suitable picture quality
(480p, 720p, 1080i or 1080p).
Off: The picture quality is fixed to 480p.
Notes
• If the Video Out is not set to “HDMI”, you cannot select the “HD
JPEG Mode”.
• All JPEG pictures will not be output through the VIDEO OUT
jack and Component video (Y/PB/PR) jacks if the HD JPEG
Mode is on and you may view pictures through HDMI jack.
• For HDMI output, DISPLAY and ZOOM buttons only work in
480p resolution mode when HD JPEG Mode is On.
JPEG Interval
1) Press SETUP button.
button to select Video.
2) Press /
3) Press button, then the / button to select the
JPEG Interval.
4) Press ENTER button, then the / button to shift
and change the
: 16 : 9
Aspect Ratio
JPEG Interval.
: Auto Fit
5) Press
ENTER
Video
Out
: HDMI
button.
HDMI Resolution
6) Press
SETUP
Off
HD JPEG Mode
5 seconds
button to exit the
10 seconds
JPEG Interval
menu.
15 seconds
Off:
5 seconds:
Plays back one file at a time.
Plays back images in the form of a slide show
at 5 seconds interval.
10 seconds: Plays back images in the form of a slide show
at 10 seconds interval.
15 seconds: Plays back images in the form of a slide show
at 15 seconds interval.
Audio
PCM: Select when connected to a Multi-channel digital
stereo amplifier. The DVD player outputs sound in the PCM
stereo format when you play a DVD recorded on the Dolby
Digital, MPEG1 or MPEG2 recording system.
Raw: Disc audio raw data will be output. Select “Raw” if
your amplifier supports “DTS”.
Off: To disable Digital Output.
Notes
• When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analog audio jacks,
select “PCM” or “Raw”.
• If this DVD player is connected to a TV using HDMI,
make sure to select “PCM”.
Night Mode
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
button to select Audio.
2) Press /
3) Press
button, then use the
/
button to select
Night Mode.
4) Press ENTER button, then use the / button to select
On or Off mode.
5) Press ENTER
: PCM
button.
Off
6) Press SETUP
On
button to exit the
menu.
: PCM
: Off
Note
Night mode is Dynamic Range Control (DRC) option for
analog audio output.
32
Rating
Parental Control
: 8. Adult
Set Password
Parental Control
DVD
4) Press “8888” using number buttons. (Please note, this
is presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.
The parental lock level is equivalent to the following
ratings:
Level 1: Kid Safe
Level 5: PG-R
Level 2: G
Level 6: R
Level 3: PG
Level 7: NC-17
Level 4: PG-13
Level 8: Adult
5) Press / to select the rating from 1 to 8. Rating one
(1) has the most restrictions while rating eight (8) can
virtually playback all DVD software.
6) Press OPEN/CLOSE button to activate the Parental Level
setting.
If the DVD has been designed to temporarily cancel the
Parental Level, the screen will change depending on which
disc is played. If you select “YES” with the ENTER
button, “Enter Password” screen will appear. Input the 4digit password as you have set then followed by ENTER
button and playback will start. If “NO” is selected, press
the OPEN/CLOSE to remove the disc.
Notes
• If you input a wrong password, press CLEAR button and
re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
DVD
New Password can be set to replace the default password.
1) Press SETUP button.
2) Press / button to select Rating.
3) Press button, then use the / button to select Set
Password.
4) Press ENTER button. “Enter Password” screen will
appear.
5) Press the number buttons to input the current password
(If the password has not been set yet after you purchase
this unit, it is “8888”). Then press ENTER.
6) Press ENTER button again, “New Password” screen will
appear. Press the number buttons to input the new
password.
7) Press ENTER button, “Confirm Password” screen will
appear. Enter the same password again for confirmation.
8) Press ENTER button. Now your new password has been
set. Be sure to remember this number!
If you forget the password, you can erase your
current password by pressing number button 8
on the remote control four times, then press
ENTER button to confirm the setting.
PASSWORD: 8888
Misc
Screen saver
: On
HDMI CEC
: Off
Use Default Settings
If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button to select Use Default Settings, then
press ENTER button.
4) Press / button to select “Yes”, then press ENTER
button. The original setting will be restored.
Screen saver
: On
Do you want to use default setting?
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
33
Function setup
DVDs equipped with the password function are rated
according to their content. The contents allowed by a parental
lock level and the way a DVD can be controlled may vary
from disc to disc.
For example, if the disc allowed, you could edit out violent
scenes unsuitable for children and replace them with more
suitable scenes, or you could lock out playback of the disc
altogether.
• DVDs may or may not respond to the parental lock
settings. This is not a defect in the DVD player. Make
sure this function works with your DVDs.
1) Press SETUP button.
2) Press
/
to
Parental Control
: 8. Adult
select Rating.
Set Password
3) Press button to
select Parental
Enter Password:
Control, then
press ENTER
button.
“Enter Password”
screen will appear.
Set Password
Function setup
Customizing the Function Settings (continued)
Setting details
DivX® Registration
HDMI-CEC: REGZA-LINK®
Some DivX® Video-On-Demand files required registration
code, please get the code of your DVD player as follow:
You can control this DVD unit from TV’s remote which
is connected via HDMI cable.
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
DivX Registration.
4) Press ENTER button, your registration code will be
shown.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
HDMI CEC.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Screen saver
: On
Screen saver
DivX R Video On Demand
HDMI CEC
Your registration code is :
: On
Off
On
Note
This registration code is for DivX® Video-On-Demand
only. Do not apply this code for other applications or
websites.
Off: To deactivate HDMI-CEC.
On: To activate HDMI-CEC.
Functions available for the HDMI-CEC
Screen Saver
• One touch play
To turn on or off the screen saver (screen protection
to prevent image burn).
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
Screen saver.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Screen saver
Off
HDMI CEC
On
When the operations with following button of this unit’s
remote control are performed, the TV will automatically
switch to appropriate input channel.
Button for one touch play: [PLAY] (make sure a disc
is inserted.)
• System information
Get & Set Menu Language:
This unit recognizes the OSD languages set for the
TV and automatically set the same language as the
player menu language (OSD menu language) for this
unit.
Power off:
When you turn the TV off, this unit will automatically
turn off.
Receiving operational signal from TV’s Remote:
You can operate this unit with TV’s remote control.
Check your TV owner’s manual for details.
Notes
Note
When you leave the unit in DVD stop mode for
approximately 2 minutes, the screen saver of the DVD
player automatically appears if you set the Screen saver
to On mode. To turn off the screen saver, press the
PLAY button.
34
• This function may not work properly depending on
the TV you are connecting.
• If the Video Out is not set to “HDMI”, HDMI-CEC will not
work.
• Other components must be compatible with HDMI-CEC
in order to use this function.
Others
Table of Languages
Table of languages and their abbreviations
Abbreviation
–––
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician
Abbreviation
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
Language
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Abbreviation
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Language
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Others
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
Language
35
Others
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Symptom
Cause
Correction
Page
No power.
• The power plug is disconnected.
• Connect the power plug securely into the
wall outlet.
11-12
The DVD player turned off by
itself.
• The automatic power off function turned the
unit off.
• Press the PLAY button.
16
No picture or abnormal color
(pinkish, greenish, etc.).
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode on
the TV so the picture from the DVD player
appears on the TV screen.
16
• The video/HDMI cable is not connected
securely.
• Connect the video/HDMI cable securely into
the appropriate jacks.
• Mismatch setting between TV and this unit.
• Select the correct Video Output setting.
• Wrong connection.
• Check the connection.
• PROGRESSIVE button is pressed on a TV
equipped with component video input jacks but
does not support progressive scan.
• Toggle PROGRESSIVE button to turn off
progressive mode.
• The equipment connected with the audio cable
is not set to receive DVD signal output.
• Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
• The audio cable is not connected securely.
• Connect the audio cable securely into the
appropriate jacks.
11-15
• The audio receiver or TV is turned off.
• Turn on the equipment connected with the
audio cable.
16
• The setting of output sound format is
incorrect.
• Select the proper audio setting.
The playback picture has
occasional distortion.
• The disc is dirty.
• Remove the disc and clean it.
5
• It is in fast forward or fast reverse playback.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
-
Brightness is unstable or noises
are present in the playback
pictures.
• The effect of copy protection.
• Connect the DVD player directly to the TV.
Avoid connecting the DVD player to a VCR or
TV/VCR combination.
11
The DVD player does not start
playback.
• No disc is inserted.
• Insert a disc.
16
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type
and color system.)
6
• The disc is placed upside down.
• Place the disc with the playback side down.
16
• The disc is not placed within the guide.
• Place the disc correctly inside the guide on
the disc tray.
16
• The disc is dirty.
• Clean the disc.
5
• The parental lock function is set.
• Cancel the parental lock function or change
the parental lock level.
33
Playback does not follow the
course of the disc’s program.
• It is in the mode of repeat playback, memory
playback, etc.
• These operations may prevent a proper
progress of the contents.
-
Buttons do not work.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
• Press and hold the ON/STANDBY button on
the front panel for more than about 3
seconds. The DVD player turns off. Press the
button again to turn it on. If the buttons still do
not work, disconnect the power plug and insert
it into the wall outlet again.
-
• The remote control is not pointed at the
remote sensor of the DVD player.
• Point the remote control at the remote sensor of
the DVD player.
10
• The remote control is too far from the DVD player.
• Operate the remote control within about 7 m.
10
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
10
No sound.
The remote control does not
work properly.
36
11-12
31
11-12
12
16
32
Others
Specifications
DVD player / outputs / supplied accessories
DVD Player
Power supply
120 V AC, 60 Hz
Power consumption
8 W (standby: less than 1.0W)
Mass
1.26 kg
External dimensions
430 x 41 x 197 mm (W/H/D)
Signal system
NTSC
Laser
Semiconductor laser, wavelength 650/780 nm
Frequency range
DVD linear sound :
Signal-to-noise ratio
More than 93 dB
Audio dynamic range
More than 80 dB
Harmonic distortion
Less than 0.05 %
48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Below measurable level (less than ±0.001 % (W.PEAK))
Operating conditions
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack x 2
Audio output (COAXIAL DIGITAL)
0.5V (p-p), 75 Ω, pin jack x 1
Audio output (ANALOG)
2.0 V (rms), 680 Ω, pin jacks (L, R) x 1
HDMI output
19 pin
Others
Wow and flutter
Supplied Accessories
Audio/video cable .................................................... 1
Remote control (SE-R0313) ................................. 1
Batteries (R03/AAA) ............................................. 2
HDMI cable (for SDK990KU model only) ............. 1
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
37
Others
Limited United States Warranty
Digital Audio Video (“DAV”) Product - Exchange Warranty
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United
States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS
DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT
LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND
MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Warranty
TACP warrants this DAV Product and its parts against defects
in materials or workmanship for a period of ninety (90) days
after the date of original retail purchase.
DURING THIS PERIOD, TACP WILL EXCHANGE A
DEFECTIVE DAV PRODUCT WITH A NEW OR
REFURBISHED DAV PRODUCT WITHOUT CHARGE TO YOU.
DURING THE PERIOD THAT COMMENCES ON THE DATE
THAT IS NINETY ONE (91) DAYS AFTER THE DATE OF
ORIGINAL RETAIL PURCHASE AND ENDS ON THE DATE
THAT IS THREE HUNDRED SIXTY FIVE (365) DAYS AFTER
THE DATE OF ORIGINAL RETAIL PURCHASE, TACP WILL
EXCHANGE A DEFECTIVE DAV PRODUCT WITH A NEW
OR REFURBISHED DAV PRODUCT FOR A FEE.
Rental Units
The warranty for DAV Product rental units begins on the date
of the first rental or thirty (30) days after the date of shipment
to the rental firm, whichever comes first.
Commercial Units
DAV Products sold and used for commercial purposes have a
limited warranty for all parts and labor, which warranty begins
on the date of original retail purchase and ends on the date
that is ninety (90) days thereafter.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this
DAV Product. Complete and mail the enclosed product
registration card or register your DAV Product on-line at
www.tacp.toshiba.com/service as soon as possible. By
registering your DAV Product you will enable TACP to bring
you new products specifically designed to meet your needs
and help us to contact you in the unlikely event a safety
notification is required under the U.S. Consumer Product Safety
Act. Failure to complete and return the product registration
card does not diminish your warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO FOLLOWING
CONDITIONS:
(1) You must retain your bill of sale or provide other proof of
purchase.
(2) All warranty servicing of this DAV Product must be made pursuant
to the TACP DAV Product Warranty Exchange Program.
(3) The warranties from TACP are effective only if the DAV
Product is purchased and operated in the Continental U.S.A.
or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
systems are not covered by this warranty. Reception
problems caused by inadequate antenna systems are your
responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend to any
DAV Product or parts that have been lost or discarded by
you or to damage to the DAV Product or parts caused by
fires, misuse, accident, Acts of God ( such as lightning or
fluctuations in electric power), improper installation, improper
38
maintenance, or use in violation of instructions furnished by
TACP; use or malfunction through simultaneous use of this
DAV Product and connected equipment; or to units that have
been modified or had the serial number removed, altered,
defaced, or rendered illegible.
(6) This warranty does not cover Product sold AS IS or WITH
ALL FAULTS.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the section “Before Calling Service Personnel,” you
find that service is needed:
(1) For instructions on how to obtain warranty service for your
DAV Product under the TACP DAV Product Warranty Exchange
Program, contact TACP’s Consumer Solutions Center toll free
at 1-800-631-3811.
(2) You must include the original bill of sale (or a copy of the
original bill of sale) or other proof of purchase along with the
entire DAV Product when sending the DAV Product to the TACP
Warranty Exchange Center specified by TACP’s Consumer
Solutions Center. You are responsible for all inbound
transportation and insurance charges for the DAV Product to
the TACP Warranty Exchange Center.
For additional information, visit TACP’s website:
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE
U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE
LIMITED WARRANTIES SET FORTH ABOVE.WITH THE EXCEPTION
OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF
THE U.S.A. AS HEREBY LIMITED,THE FOREGOING WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
GUARANTEES, AGREEMENTS, AND OF ALL OTHER
WARRANTIES, GUARANTEES, AGREEMENTS, AND OR
REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS
INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED
DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS DAV
PRODUCT).
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any manner
whatsoever. The time within which an action must be commenced to
enforce any obligation of TACP arising under the warranty or under
any statute or law of the United States or any state thereof is hereby
limited to ninety (90) days from the date you discover, or should have
discovered, the defect. This limitation does not apply to implied
warranties arising under state law.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE
TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS,WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER
SUCH CIRCUMSTANCES.
Others
Limited Canadian Warranty
For Toshiba Brand Digital Audio/Video Products
Toshiba of Canada Limited (“TCL”) makes the following limited warranties to original consumers in Canada. THESE LIMITED
WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND
DIGITAL AUDIO/VIDEO PRODUCT (the “DAV PRODUCT(S)” or “DAV Product (s)” AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
DAV PRODUCTS PURCHASED IN CANADA, AND USED ANYWHERE OUTSIDE OF CANADA INCLUDING,WITHOUT LIMITATION,
THE UNITED STATES AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT LIMITATION,THE UNITED STATES
AND MEXICO, AND USED IN CANADA, ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labour
Subject to the more limited warranty if the DAV Product is
used for any commercial or business purposes as set out
below, TCL warrants the DAV Product and its parts against
material defects in materials or workmanship that result in
the DAV Product failing for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL
WILL, AT TCL’S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED PART,
WITHOUT CHARGE TO YOU FOR PARTS OR LABOUR.YOU
MUST DELIVER THE ENTIRE DAV PRODUCT TO A TCL
DAV PRODUCT AUTHORIZED SERVICE PROVIDER
(“ASP”).YOU MUST PAY FOR ALL TRANSPORTATION AND
INSURANCE CHARGES FOR THE DAV PRODUCT TO AND
FROM THE ASP.
b.
c.
d.
e.
f.
The warranty for DAV Product rental units begins with the
date of first rental or thirty (30) days from the date of shipment
to the rental firm, whichever comes first.
Limited Warranty for Commercial Units
TCL warrants DAV Products that are used for any commercial
or business purposes as follows: all parts are warranted
against material defects in materials or workmanship that
result in the DAV Product failing for a period of ninety (90)
days after the date of original retail purchase. DURING THIS
PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR
REPLACE A DEFECTIVE PART WITH A NEW OR
REFURBISHED PART, WITHOUT CHARGE TO YOU FOR
PARTS OR LABOUR. YOU MUST DELIVER THE ENTIRE
DAV PRODUCT TO AN ASP. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR THE
DAV PRODUCT TO AND FROM THE ASP.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this DAV Product must be performed
by an ASP.
(3) The warranties from TCL are effective only if the DAV Product
is (i) purchased as new and unopened from TCL or from
TCL’s authorized distributors, dealers or resellers (“ADR’s”)
and (ii) located/operated in Canada.
(4) Warranties extend only to material defects in materials or
workmanship as limited above, and do not extend to:
a. Service, repairs or replacement made necessary by
accident, misuse, abuse, moisture, liquids, dust, dirt,
neglect, accident, damage, 24/7 applications, improper
installation, improper operation, improper cleaning,
improper maintenance, normal wear and tear, or any other
external cause or event, act or omission outside the
g.
h.
i.
j.
Others
Rental Units
control of TCL, including fire, theft, acts of God, alteration,
power failures, power surges or power shortages, lightning,
other electrical faults, or repairs, modifications or
replacements by persons other than those authorized by
TCL to service the DAV Product;
Replacement of missing, discarded or lost parts, the
provision of retrofits, or preventive maintenance;
Repair of damage that is cosmetic only or does not affect
the DAV Product functionality, such as wear and tear,
scratches and dents;
Service on Toshiba-branded accessory items (such
accessory items may be covered by their own warranty);
Service on third party products or service made necessary
by use of incompatible third party products;
Service made necessary by the simultaneous use of this
DAV Product and connected equipment;
Modifications to the DAV Product not approved in writing
by TCL, and service made necessary by the use or
installation of non-Toshiba modifications to the DAV
Product;
Service of a DAV Product on which the TOSHIBA label or
logo, rating label or serial number have been defaced or
removed;
On-site service and repair of the DAV Product;
Damage to the DAV Product caused by failure to follow the
specifications, User manuals or guides as to usage and/or
storage.
Disclaimer and Limitation of Remedy
TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER
EXPRESS AND IMPLIED WARRANTIES, CONDITIONS AND
REPRESENTATIONS FOR THIS DAV PRODUCT, INCLUDING
THE IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED. IF
THE APPLICABLE LAW, STATUTORY OR OTHERWISE,
PRECLUDES THE EXCLUSION OF ANY IMPLIED
WARRANTIES, CONDITIONS AND REPRESENTATIONS THEN
SUCH IMPLIED WARRANTIES, CONDITIONS AND
REPRESENTATIONS ARE OTHERWISE LIMITED IN
DURATION TO THE TEAM OF THIS EXPRESS WRITTEN
LIMITED WARRANTY. TO THE EXTENT NOT PRECLUDED BY
LAW, STATUTORY OR OTHERWISE, THIS WRITTEN
WARRANTY SUPERCEDES AND SPECIFICALLY DISCLAIMS
ANY OTHER WARRANTY, CONDITION OR REPRESENTATION
NOT STATED IN THIS WARRANTY, WHETHER MADE BY TCL,
TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs AND
ASPs AND WHETHER MADE ORALLY OR IN WRITING
(INCLUDING ANY STATEMENT IN ANY BROCHURE, PRESS
RELEASE, ANNOUNCEMENT, ADVERTISEMENT, POINT OF
SALE DISPLAY, ETC.).
39
Others
YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE
INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND/OR
MANUALS. IF YOU FAIL TO DO SO, THIS DAV PRODUCT MAY
NOT FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE.
THIS WARRANTY WILL NOT COVER ANY SERVICE THAT IS
REQUIRED, IN PART OR IN WHOLE, AS A RESULT OF ANY
FAILURE TO FOLLOW THE SET-UP AND USAGE
INSTRUCTIONS. THIS WARRANTY DOES NOT APPLY AND
SHALL BE VOID AND UNENFORCEABLE IF THE DAV
PRODUCT IS OPENED, SERVICED, OR REPAIRED BY
PERSONS OTHER THAN THOSE AUTHORIZED BY TCL TO
SERVICE OR REPAIR THE DAV PRODUCT.
IF THE DAV PRODUCT FAILS TO WORK AS WARRANTED
ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE
REPAIR OR REPLACEMENT OF THE DEFECTIVE PART. IN
NO EVENT WILL TCL, TOSHIBA CORPORATION, THEIR
AFFILIATES, ADRs OR ASPs (THE “RELATED PARTIES”) BE
LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES.
MONEY, REIMBURSEMENT, COSTS OR EXPENSES. THIS
LIMITATION APPLIES TO DAMAGES, MONEY,
REIMBURSEMENT, COSTS OR EXPENSES OF ANY KIND
WHATSOEVER INCLUDING ANY DIRECT OR INDIRECT
DAMAGES, DAMAGE TO PROPERTY OR PERSON, LOST
PROFITS, LOST SAVINGS, INCONVENIENCE OR OTHER
SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL
DAMAGES, WHETHER FOR BREACH OF WARRANTY,
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE),
UNDER A STATUTE OR UNDER ANY OTHER LAW OR FORM
OR ACTION, OR WHETHER ARISING OUT OF THE USE OF
OR INABILITY TO USE THE DAV PRODUCT, EVEN IF ANY OF
THE RELATED PARTIES HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY
ANY OTHER PARTY.
No person, agent, distributor, dealer or company is authorized to
change, modify or extend the terms of these warranties in any
manner whatsoever.
Arbitration and Dispute Resolution
To the extent not precluded by law, any claim, dispute,
controversy or disagreement (whether for breach of warranty,
breach of contract, tort (including negligence), under a statute
or under any other law or form of action) against any of the
Related Parties arising out of , or otherwise relating to: (i) this
warranty; (ii) the DAV Product; (iii) any oral or written
representations, statements, brochures, press releases,
advertising, announcement, point of sale display, or promotional
material relating to the DAV Product; (iv) the relationships that
result from this warranty, (the foregoing claims, disputes
controversies and disagreements are collectively referred to as
the “Dispute”), shall be referred to and resolved by final and
binding arbitration (to the exclusion of the courts). To the extent
not precluded by law, you agree to waive any right that you may
have to commence or participate in any representative or class
proceeding against the Related Parties relating to any Dispute.
If and where applicable and to the extent not precluded by law,
you further agree to opt out of any such representative or class
proceedings. Arbitration of any Dispute will be conducted in the
forum and in the manner as agreed to between you and TCL.
Failing such agreement, the arbitration will be conducted by one
arbitrator pursuant to the laws and rules relating to arbitration
generally in force in the jurisdiction in which you reside at the
time that the Dispute arises. To the extent not precluded by law,
no claim, dispute, controversy or disagreement of any other
person may be joined or combined with any Dispute by you,
without the prior written consent of TCL.
Critical Applications
The DAV Product you have purchased is not designed for any
“critical applications.” “Critical applications” means life support
systems, medical applications, connections to implanted
medical devices, commercial transportation, nuclear facilities
or systems or any other applications where DAV Product failure
could lead to injury to persons or loss of life or catastrophic
property damage.
IF THE CUSTOMER USES THE DAV PRODUCT IN ANY
CRITICAL APPLICATION, THE CUSTOMER-AND NOT TCL,
ITS AFFILIATES, ADRs OR ASPs - ASSUME SOLE AND
FULL RESPONSIBILITY FOR SUCH USE. TCL RESERVES
THE RIGHT TO REFUSE TO SERVICE ANY DAV PRODUCT
USED IN A CRITICAL APPLICATION. TCL, ITS AFFILIATES,
ADRs and ASPs HEREBY DISCLAIM ANY AND ALL
LIABILITY, DAMAGES AND CONSEQUENCES ARISING
OUT OF THE SERVICE OR REFUSAL TO SERVICE SUCH
DAV PRODUCT AND FURTHER DISCLAIM ANY AND ALL
LIABILITY, CONSEQUENCES AND DAMAGES THAT MAY
ARISE OR RESULT FROM THE USE OF THE DAV PRODUCT
IN ANY CRITICAL APPLICATIONS.
General Provisions
If and to the extent that any provision of this limited warranty
should generally be found to be unenforceable, the
unenforceable provision shall be severed from the warranty
and deemed not to form part of the warranty. The remaining
provisions of this warranty shall be and remain valid and
enforceable. If and to the extent that any provision of this
limited warranty as it relates to any of the Related Parties is
found to be invalid or unenforceable in respect of that party
(the “Excluded Party”), the Excluded Party shall be deemed
to be severed or excluded from the provision, and the provision
shall remain valid, enforceable and applicable in respect of
the other or remaining Related Parties.
To the extent permitted by law, this limited warranty shall be
governed and construed in accordance with the laws of Ontario.
If there is any inconsistency between this limited warranty, on
the one hand, and any statement in the packaging of the DAV
Product or in any other document enclosed with, or used in
the context of the promotion or sale of, the DAV Product, on
the other hand, the provisions of this limited warranty shall
prevail.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Before Calling Service Personnel” section,
you find that service is needed:
(1) To find the nearest ASP, visit TCL’s web site at
www.toshiba.ca, or call toll free 1-800-268-3404.
(2) Present your bill of sale or other proof of purchase to the
ASP.
For additional information, visit TCL’s website: www.toshiba.ca
811-SD7291W012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement