basic characteristics &amp

basic characteristics &amp
BASIC CHARACTERISTICS & PARAMETERS OF
PL POWER SUPPLY UPS
Uninterruptible power supply (UPS) of PL type ensures power
supplying of devices despite of black outs and quality mains
absence. Provides elimination of the voltage spikes and over
voltage, filtration of shape distorted voltage and bypassing of
blackout and low voltage of the powering mains
•
ON-LINE technology with double conversion of energy and transfer
to back up mode without interruption of the power supplying of load
•
Developed by use an advanced technology (multiprocessor control
on base of DSP – allows to implement newest control algorithm,
which achieves significant increase of the quality of the system,
SMD technology) and new semiconductor components (IGBT
power transistors)
•
High reliability of device
•
High resistance against disturbances from mains and level of
protection of load before failures
High stability and quality of the output voltage
Possibility of the parallel connection of up to eight UPS in order to increase power output
and redundancy of the back up system
Electronic compensation of power factor (power factor on the input is higher than 0.97)
Excellent parameters of conformity of the input circuits with mains or with generating set possibility
of the consecutive loading of the generating set, what decrease the necessity of dimension of the
power generating set
Setting and monitoring of the operating modes of the power supply directly on the front panel of the
power supply by LCD graphical unit
Acoustic and optical indication of states of power supply
Record of the statistic data (it is important at diagnostic of the operating states of power supply)
Possibility of power supplying of load during maintenance and prophylactic control of power supply
(Manual Bypass)
Possibility of operation in ECO mode (low consummation of energy)
Serial interface RS 232, RS 485 as standard
Installation not requiring a lot of space – possibility of placing directly to wall of room
Possibility of connection of battery modules for increasing of the back up time
Possibility of solution of the special requirements from the customer directly at the producer of UPS.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Extensions:
•
•
•
•
SNMP adapter allows communication of MASTER computer with UPS
Module of digital galvanic isolated inputs and outputs
Possibility to connect a special module, which provides independent control of the quality
of the input mains of UPS (control of the effective value, frequency, content high harmonic
elements). This module allows location of UPS for example in the hard conditions of railways,
where supervision is necessary important condition for their put into operation
Possibility of input or output isolating transformer addition
Software
•
GLOBMON - program system for the monitoring and setting devices, monitoring of operation states
and states of the environment, control, record and archiving of the critical states of devices
•
UPSMON - program assigned for monitoring of UPS and shutdown of back up PC.
ELTECO, a.s.
Rosinska cesta 15
P.O.Box C9
010 01 Zilina
SLOVAKIA
ID No.: 17 321 719
Office:
Sales dept.:
Financial dept.:
Fax:
Hotline:
VAT No.: SK2020446494
+ 421 (0)41 50 66 111
+ 421 (0)41 50 66 601
+ 421 (0)41 50 66 121, 50 66 122
+ 421 (0)41 56 50 104
+ 421 902 08 36 72
Register: Sa, No.:10318/L
District court Zilina
Specifications
TYPE
Parameters
Nominal power / Active power [kVA/kW]
PL8
PL10
PL15
8 / 6,4
10 / 8
15 / 12
Nominal input voltage
Range
of input
voltage
min input voltage
transfer to back-up mode
Nominal input current
30 / 24
40 / 32
it changes according to size of the connected load:
20 % Pnom – 160 / 277 V ÷ 265 / 459 V
100 % Pnom – 200 / 347 V ÷ 265 / 459 V
11 A
Recommended input protection, char. C
(D for parallel cooperation)
13 A
20 A
26 A
40 A
52 A
20 A
30 A
40 A
60 A
80 A
16 (20 A of 70 min.)
25 (32 A >
80 min.)
32 (40 A >
90 min.)
63 A
100 A
Frequency of the input voltage
45 ÷ 55 Hz (standard setting)
Power factor
> 0,97
Nominal output voltage
3 x 230/400 V (standard setting)
Form of the output voltage
sinusoidal
Distortion (linear load)
<2%
back up mode
50 Hz ± 0,1 %
mains present
The same as frequency of the input voltage in set range
(stand. 45 ÷ 55 Hz)
Output effective current
11,6 A
21,7 A
29 A
43,4 A
58 A
16 A
25 A
32 A
63 A
100 A
CGSG 5Cx2,5 (4)
CGSG 5Cx4
(6)
CGSG 5Cx6
(10)
1,2 kW
1,6 kW
Recommended output disconnector at
parallel operation
Recommended input/output cables *
Radiated Heat rate
0,65 kW
14,5 A
0,8 kW
1minute without
activation of BYPASS
80 ms
3,3 kW
Limited by the input current of circuit breaker
- during overload transfer to ByPass or output voltage limitation
- during permanent overload automatic blocking of power supply
operation from mains
92%
operation from battery
90%
Power factor applied load
0,6 ÷ 1
Crest factor
3
Nominal voltage of batteries
2 x 192 V
Battery type
Sealed, acid, maintenance free
Control of the internal temperature
- during dropping below min. temperature (at startup) – UPS blocking
- during excess of max. temperature – transfer to ByPass or blocking
Protection
IP 20
Operating temperature
from + 5 ºC up to 40 ºC
Recommended temp. range for max.
battery lifetime
from +18 ºC up to 23 ºC
Storage temperature
from - 5 ºC up to 50 ºC
Max transport temp. with batteries
from - 20 ºC up to 50 ºC
Operating relative humidity
80 % max
Storage relative humidity
Dust
* May differ according to installation conditions
90 % max
ID No.: 17 321 719
2,4 kW
> 200 %
Electronic fuse on the UPS output
ELTECO, a.s.
Rosinska cesta 15
P.O.Box C9
010 01 Zilina
SLOVAKIA
CGSG 5Cx16
150 %
on BYPASS
Efficiency
PL40
3 x 265/459 V
Maximal input current
Possible
overloading
20 / 16
PL30
3 x 230/400 V
max input voltage
Frequency of
output voltage
PL20
Office:
Sales dept.:
Financial dept.:
Fax:
Hotline:
VAT No.: SK2020446494
Contents of dust particles in air cannot exceed 0,75 mg/m
+ 421 (0)41 50 66 111
+ 421 (0)41 50 66 601
+ 421 (0)41 50 66 121, 50 66 122
+ 421 (0)41 56 50 104
+ 421 902 08 36 72
Register: Sa, No.:10318/L
District court Zilina
3
Back-up time and dimensions of the UPS with internal batteries:
Type
PL08N7S1
PL08N9S1
PL08N9M2
PL10N7S1
PL10N9M2
PL10N9L3
PL10N9L4
PL15N9S1
PL15N9M2
PL15N9L3
PL15N9L4
PL20N9L3
PL20N9L4
PL30N9M2
PL30N9L3
PL30N9L4
Capacity
of bat.
[Ah]
7
9
18
7
18
27
36
9
18
27
36
27
36
18
27
36
Back-up Time [min]
Pout=75%Pnom
Pout=100%Pnom
pF=0,8
pF=1
pF=0,8
13:19
9:55
8:32
19:41
15:10
12:11
46:19
36:30
33:34
9:34
7:05
6:23
35:37
27:55
23:54
50:04
39:20
35:00
78:51
62:30
57:34
7:41
5:40
5:50
21:17
16:35
13:52
35:43
27:55
25:36
50:04
39:45
33:00
20:43
11:50
10:07
35:43
29:30
25:19
7:41
5:40
5:49
8:21
6:15
4:52
21:17
16:35
13:52
Dimensions [mm]
WxHxD
762
762
762
762
762
762
762
762
762
762
762
762
762
762
762
762
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Weight
[kg]
1214 x 524
1214 x 524
1444 x 524
1214 x 524
1444 x 524
1904 x 524
1904 x 524
1214 x 524
1444 x 524
1904 x 524
1904 x 524
1904 x 524
1904 x 524
1444 x 524
1904 x 524
1904 x 524
239
248
350
240
351
475
562
250
352
476
563
480
567
354
481
567
Example of labelling: PL10N7L3
PL – 3-phase UPS
10 – output power 10kVA, the entire output range is 8,10,15, 20, 30 kVA
N – 5-year batteries; or L – batteries with extended service life
7 – capacity of one battery set in Ah, 9Ah batteries are preferred
L – mechanics type, small=S, medium=M, large=L
3 – number of parallel battery sets of 36 pcs.
PL 30 +
BM65CN64P30 - 159
PL 40 +
BM40CN64P40 - 65
PL 40 +
BM65CN64P40 - 112
80
130
65
80
130
76
44
79
19
29
Back-up time at
100% load [min.]
54
pf=0,6
181
112
159
79
109
65
112
30
44
79
Back-up time at
75% load [min.]
pf=0,8
181
112
159
79
109
65
112
30
44
79
pf=0,6
249
159
215
112
154
95
159
46
65
112
177+
1100
177+820
177+1100
177+2x820
185+820
185+
1100
185+
2x820
762 + 800
762 + 1000
762+2x800
762+800
762+
1000
762+
2x800
width UPS + BM
[mm]
Dimensions
Weight of UPS + BM [kg]
177+820
762+800
depth UPS + BM
762+
1000
524 + 800
800
UPS height
1444
BM height
1400
ELTECO, a.s.
Rosinska cesta 15
P.O.Box C9
010 01 Zilina
SLOVAKIA
ID No.: 17 321 719
Office:
Sales dept.:
Financial dept.:
Fax:
Hotline:
VAT No.: SK2020446494
+ 421 (0)41 50 66 111
+ 421 (0)41 50 66 601
+ 421 (0)41 50 66 121, 50 66 122
+ 421 (0)41 56 50 104
+ 421 902 08 36 72
Register: Sa, No.:10318/L
PL 40 +
BM65CN32P40 - 46
PL 30 +
BM40CN64P30 - 95
80
54
PL 20 +
BM65CN32P20 - 112
65
112
PL 15 +
BM40CN64P15 -215
80
79
Total capacity of battery [Ah]
BM65CN32P15 - 159
65
130
Parameters
PL 15 +
65
pf=0,8
UPS & BM type
PL 10 +
BM65CN32P10 - 249
PL 20 +
BM40CN64P20 - 154
Back-up time and dimensions of the UPS and additional battery module containing batteries with normal
lifetime (3-5 years):
District court Zilina
PL 30 +
BM40CL64P30 - 79
PL 30 +
BM65CL64P30 - 151
PL 40 +
BM75CL30P40 - 48
PL 40 +
BM75CL60P40 - 117
80
80
130
75
150
Back-up time at pf=0,8
100% load
pf=0,6
[min.]
128
72
103
47
58
37
72
22
54
164
112
141
62
100
51
112
33
87
164
112
141
62
100
51
112
33
87
222
151
173
112
141
79
151
48
117
177+820
177+1100
177+820
177+1100
177+1100
177+
2x820
177+884
177+
2x884
762+800
762+1000
762 + 800
Back-up time at pf=0,8
75% load [min.] pf=0,6
width UPS + BM
[mm]
Dimensions
Weight of UPS + BM [kg]
PL 15 +
depth UPS + BM
PL 20 +
65
BM40CL64P20 - 141
80
PL 15 +
BM40CL64P15 -173
65
BM65CL32P15 - 151
65
Parameters
PL 10 +
BM65CL32P10 - 222
Total capacity of battery [Ah]
UPS & BM type
PL 20 +
BM65CL32P20 - 112
Back-up time and dimensions of the UPS and additional battery module containing batteries with extended
lifetime (8-10 years):
762 + 1000
524 + 800
UPS height
1444
BM height
1444
There are average back-up times presented. Tolerances of back-up times:
T<6min(+15%~-15%), 6min<T<10min(+12%~-12%), 10min<T<60min(+8%~-8%),
T>=60min(+5%~-5%)
ELTECO, a.s.
Rosinska cesta 15
P.O.Box C9
010 01 Zilina
SLOVAKIA
ID No.: 17 321 719
Office:
Sales dept.:
Financial dept.:
Fax:
Hotline:
VAT No.: SK2020446494
+ 421 (0)41 50 66 111
+ 421 (0)41 50 66 601
+ 421 (0)41 50 66 121, 50 66 122
+ 421 (0)41 56 50 104
+ 421 902 08 36 72
Register: Sa, No.:10318/L
District court Zilina
762+
2x800
762+800
762+
2x800
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement