Samsung | MM-C330D | Samsung MM-C330D User Manual

MM-C330D
PERSONAL MICRO COMPONENT
SYSTEM
user manual
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
AH68-02271K(REV 1.0)
MM-C330D-Asia-ENG-1.indd
2-3
www.samsung.com/register
2010-3-4
8:46:05
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER (or BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
ENG
PREPARATION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
Precautions
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock
or personal injury.
This symbol indicates important instructions
accompanying the product.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
CAUTION
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and shall stay readily operable at any time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
[Saudi Arabian Standards Organisation only]
THIS APPLIANCE IS FITTED WITH 220V SASO APPROVED PLUG.THE CUSTOMER IS ENTITLED TO A FREE SASO
APPROVED 127V PLUG FROM THE LOCAL DEALER.
Phones
Protect the player from moisture(i.e. vases) , and excess heat(e.
g.fireplace) or equipment creating strong magnetic or electric fields (i.
e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
1
MM-C330D-Asia-ENG-1.indd
4-5
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
2010-3-4
8:46:11
Features
Contents
ENG
PREPARATION
PREPARATION
Multi-Disc Playback & FM Tuner
The MM-C330D combines the convenience of multi-disc playback capability, including
DVD, CD, MP3-CD, CD-R, CD-RW, DivX,JPEG and DVD-R/RW, with a sophisticated
FM tuner, TAPE, USB HOST all in a single player.
TV Screen Saver Function
The MM-C330D automatically brightens and darkens the brightness of
the TV screen after 3 minutes in the stop mode.
The MM-C330D automatically switches itself into the power saving
mode after 20 minutes in the screen saver mode.
Power Saving Function
The MM-C330D automatically shuts itself off after 20 minutes in the stop mode(only for USB,
DVD).
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
VIDEO
Safety Warnings ................................................................................................................................................................. 1
Precautions......................................................................................................................................................................... 2
Features ............................................................................................................................................................................. 3
Description.......................................................................................................................................................................... 5
CONNECTIONS
Connecting the Speakers ................................................................................................................................................... 9
Connecting to a TV ............................................................................................................................................................. 10
P.SCAN(Progressive Scan) Function ................................................................................................................................. 12
Connecting External Components ...................................................................................................................................... 13
Connecting the FM Antennas ............................................................................................................................................. 14
Setting the Clock ................................................................................................................................................................ 15
OPERATION
Disc Playback ..................................................................................................................................................................... 16
MP3/WMA-CD Playback .................................................................................................................................................... 17
JPEG File Playback ............................................................................................................................................................ 18
DivX Playback .................................................................................................................................................................... 19
Playing Media Files using the USB feature ........................................................................................................................ 21
Displaying Disc Information ................................................................................................................................................ 23
Fast/Slow Playback ............................................................................................................................................................ 24
Skipping Scenes/Songs...................................................................................................................................................... 25
Angle Function.................................................................................................................................................................... 26
Repeat Playback ................................................................................................................................................................ 27
A-B Repeat Playback ........................................................................................................................................................ 28
Zoom Function.................................................................................................................................................................... 29
Selecting Audio/Subtitle Language..................................................................................................................................... 30
Moving Directly to a Scene/Song ....................................................................................................................................... 31
Using Disc Menu ................................................................................................................................................................ 32
Using the Title Menu........................................................................................................................................................... 33
SETUP
1
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
~ 6
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
3
MM-C330D-Asia-ENG-1.indd
6-7
Setting the Language ......................................................................................................................................................... 34
Setting TV Screen type....................................................................................................................................................... 35
Setting Parental Controls (Rating Level) ............................................................................................................................ 37
Setting the Password.......................................................................................................................................................... 38
Setting the DRC (Dynamic Range Compression) .............................................................................................................. 39
AV SYNC Setup ................................................................................................................................................................. 40
RADIO OPERATION
Listening to Radio ............................................................................................................................................................... 41
Presetting Stations ............................................................................................................................................................. 42
TAPE
Listening to a Cassette ....................................................................................................................................................... 43
Recording a Radio Program ............................................................................................................................................... 44
Recording a Compact Disc ................................................................................................................................................. 45
MISCELLANEOUS
CD RIPPING Function ........................................................................................................................................................ 47
Timer Function.................................................................................................................................................................... 48
Canceling the Timer ........................................................................................................................................................... 49
Power Sound/Power Bass/Treble Level/Bass Level Function ........................................................................................... 50
DSP/EQ Function .............................................................................................................................................................. 51
Sleep Timer Function / Mute Function................................................................................................................................ 52
DEMO Function / DIMMER Function ................................................................................................................................. 53
Connecting Headphones/Microphone ................................................................................................................................ 54
Cautions on Handling and Storing Discs ............................................................................................................................ 55
Precautions When Using Audio Cassettes ......................................................................................................................... 55
Before Calling for Service ................................................................................................................................................... 56
Notes on Discs ................................................................................................................................................................... 58
Notes on Terminology ........................................................................................................................................................ 59
Specifications ..................................................................................................................................................................... 60
4
2010-3-4
8:46:14
Description
—Top Panel—
ENG
9
8
PREPARATION
—Front Panel—
1.
2.
3.
4.
5.
6.
7.
8.
9.
POWER
FUNCTION CHANGE
SEARCH FUNCTION BUTTON(DOWN)
TUNING MODE OR STOP BUTTON
PLAY/PAUSE BUTTON
SEARCH FUNCTION BUTTON(UP)
OPEN/CLOSE
CASSETTE DOOR OPEN/CLOSE
CASSETTE DECK
FUNC.
6
1
1
2 3 4 5 6
7
—Rear Panel—
2
3
4
5
8
1.
2.
3.
WINDOW DISPLAY
COMPACT DISC COMPARTMENT
HEADPHONE JACK
4.
5.
6.
MIC
USB JACK
VOLUME
1
WHAT’S INCLUDED
Check for the supplied accessories below.
2
3
1. Component Output
Connectors
Connect a TV with component video input
jacks to these jacks.
Video Cable
Note
User's Manual
• The accessories may look slightly different than those pictured above.
Remote Control
5
6
4. FM Antenna Connector
5. Speaker Connector Terminals
6. Clamp-Wire (Fasten the speaker wires.)
2. AUX IN
3. Video Output Connector
Connect the TV's video input jacks (VIDEO
IN) to the VIDEO OUT connector.
6
5
MM-C330D-Asia-ENG-1.indd
FM Antenna
4
8-9
2010-3-4
8:46:17
Description
ENG
OPEN/CLOSE button
POWER button
TIMER ON/OFF button
TIMER/CLOCK button
DEMO/DIMMER button
DVD button
TUNER button
USB/AUX button
TAPE button
Insert Remote Batteries
the battery
1 Remove
cover in the direction
of the arrow.
Number(0~9) buttons
CD RIPPING button
STEP button
CD Skip buttons
VOLUME button
7
MM-C330D-Asia-ENG-1.indd
Replace the battery
cover.
TUNING button/Tuning Preset button
RETURN button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
EXIT button
SUBTITLE button
DSP/EQ button
ECHO button
MO/ST button
SLOW button
ZOOM button
POWER SOUND button
REPEAT A-B button
3
Play button
Stop button
SEARCH buttons
MUTE button
REPEAT button
SLEEP button
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
PAUSE button
Cursor/ENTER button
INFO button
2
CANCEL button
AUDIO button
MENU button
PREPARATION
—Remote Control—
REC button
MIC VOL + button
TUNER MEMORY button
TREB/BASS button
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
30
30
MIC VOL - button
ANGLE button
8
10-11
2010-3-4
8:46:19
Connecting the Speakers
Connecting to a TV
Before moving or installing the product, be sure to turn off the power and
disconnect the power cord.
Please be sure to turn off the power and unplug the power cord before moving or
installing this unit.
Please choose one video connection method.
Method 1 Using Video Out (Good Quality)
1
Connect Video Out on the player to Video
In on your TV.
2
Press the TV/VIDEO button on the remote
of TV control to set the TV to "VIDEO".
CONNECTIONS
The loudspeaker connector terminals are located on the rear of the system.
There are two terminals on the system:
left speaker (marked L)
right speaker (marked R)
To achieve the correct sound quality,insert those speaker connector cables to
the speaker connector terminals of the system.
ENG
8
8
Position of the DVD Player
• Place it on a stand or cabinet shelf,
or under the TV stand.
Front Speakers
L R
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be
at the same height as your ear.
( supplied)
Note
• Composite Video: A single video signal that is a composite of the black-and-white
information (Y) and the color information (C).
Directions in Installing Speaker
• Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause
performance degradation of the speaker.
• Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident
caused by falling of the speaker.
• Do not take the speaker near from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
9
MM-C330D-Asia-ENG-1.indd
10
12-13
2010-3-4
8:46:21
P.SCAN (Progressive Scan) Function
Connecting to a TV(Con’t)
Please be sure to turn off the power and unplug the power cord before moving
or installing this unit.
Please choose one video connection method.
You can select "Progressive Scan" or "Interlace Scan" for you TV.
Please go to <Setup> <Display Setup> <Video Output> and set I-SCAN or P-SCAN.
(see the page 35.)
Component Video (Best Quality)
CONNECTIONS
Method 2
Use this method if your TV have Pr,Pb andY jacks.
If your television is equipped with Component Video inputs,connect a component
video cable from the Pr,Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
8
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/25th of a second, contains
two interfaced fields, thus a total of 50 fields are
displayed every 1/50th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
(not supplied)
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
• Depending on the brand and model of your TV, this function may not work.
12
11
MM-C330D-Asia-ENG-1.indd
ENG
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
14-15
2010-3-4
8:46:23
Connecting the FM Antennas
Connecting External Components
ENG
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
CONNECTIONS
8
FM Antenna (supplied)
8
(not supplied)
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
1
2
Connect the FM antenna supplied to the FM COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
Note
1
Connect AUX IN on the player to Audio Out on the external analog component.
2
Press AUX to select AUX.
• This unit does not receive AM broadcasts.
• Be sure to match connector colors.
• ‘AUX’ appears in the display.
13
MM-C330D-Asia-ENG-1.indd
16-17
14
2010-3-4
8:46:25
Setting the Clock
Disc Playback
ENG
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system on
by pressing POWER
button.
2
Press TIMER/CLOCK
twice.
• "CLOCK" is displayed.
• Increase the minutes :
• Decrease the minutes :
5
• Increase the hours :
• Decrease the hours :
1
2
3
When the correct
time is displayed,
press ENTER.
• "TIMER" appears in the display.
• The current time is now set.
Note
Load a disc.
• Place a disc gently into the tray with the disc’s label facing up.
OPERATION
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
3
Press ENTER.
The hour flashes.
Press OPEN/CLOSE button to open the
disc tray.
Press OPEN/CLOSE button to close the disc
tray.
• For mixed discs, the play order is as below:MP3/WMA DIVX JPEG.
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some MP3-CDs cannot be played.
• For CD discs, you can press the numeric buttons to select the track, when you
press the numeric buttons after 3 seconds, the playback starts automatically.
• Table of contents of a MP3-CD varies depending on the MP3 track format recorded
Note
• You can display the time, even when you are using another function, by pressing
TIMER/CLOCK once.
• You can also use
on the panel front instead of
•
•
on the disc.
DTS Audio disc is not supported.
DVD Audio is not supported.
buttons in step 3,4.
To stop playback, press STOP button during playback.
• If pressed once,
the stop position will be stored in memory. If PLAY (
) button
is pressed, playback resumes from the stop position. (This function works only with
DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY (
playback starts from the beginning.
) button is pressed,
To temporarily pause playback, press PAUSE button
during playback.
• To resume playback, press PLAY(
15
MM-C330D-Asia-ENG-1.indd
) button again.
16
18-19
2010-3-4
8:46:27
MP3/WMA-CD Playback
JPEG File Playback
ENG
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Use
1
Load the MP3/WMA
disc.
• The MP3/WMA menu screen will appear
and playback will start.
2
• Use
to select the album,
and then press the
ENTER button.
Rotate/Flip Function
Press Cursor
,
,
,
buttons during playback.
to select the track.
• The appearance of the menu depends
on the MP3/WMA disc.
• WMA-DRM files cannot be played.
OPERATION
button: Flip Vertically
button: Rotate 90° Clockwise
button: Rotate 90°
Counterclockwise
Original Image
3
To change the
album, use
to select another
album in Stop mode,
and then press the
ENTER button.
button: Flip Vertically
4
Press the STOP
button to stop
playback.
Zoom/Auto play Function
Press INFO button during playback, TV displays as below:
• To select another album and track,
repeat Steps 2 and 3 above.
icon, and then press ENTER button, each time you
press the button, your selection will rotate as clockwise.
icon, and then press ENTER button, each time you
2. Use , to select
press the button, your selection will change as below: x2 x4 x2 Off.
icon, and then press ENTER button, TV displays as
3. Use , to select
below:
1. Use
Note
• Depending on the recording mode, some MP3/WMA-CDs may not be played.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track
format recorded on the disc.
,
to select
Press ENTER button to select the time space for playing the pictures.
4. Press STOP button to cancel this function.
17
MM-C330D-Asia-ENG-1.indd
18
20-21
2010-3-4
8:46:30
DivX Playback
5 Minute Skip function
During playback, press the
,
ENG
button.
• Go to the screen 5 minutes after whenever you press
• Go to the screen 5 minutes earlier whenever you press
Note
Skip Forward/Back
During playback, press the
• Go to the next file whenever you press
2 files in the disk.
• Go to the previous file whenever you press
button, if there are over
2 files in the disk.
• For MPG format files, 5 minute skip function is not supported.
Press the AUDIO button.
OPERATION
• If there are multiple audio tracks on a disc, you can toggle between them.
• Each time you press the button, your selection will toggle between AUDIO(OFF, 1/1, 1/2 ...).
Fast playback
Press
button.
Audio Display
button.
button, if there are over
button.
Subtitle Display
button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
Press the SUBTITLE button.
• Each time you press the button, your selection will changed as below:
KOR
SUBTITLE
Off
SUBTITLE
• If the disc has only one subtitle file, it will be played automatically.
• Up to 8 subtitle languages are supported.
• To resume normal playback, press PLAY (
DivX Feature Table
) button.
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
SPEC
VIDEO Compatibility
DivX3.11
Up to the latest VERSION
AUDIO Compatibility
MP3
CBR : 8kbps~320kbps
AC3
CBR : 32kbps~640kbps
WMA CBR1:Stereo case:48kbps~384kbps
CBR2:Mono case:64kbps~192kbps
Note
19
MM-C330D-Asia-ENG-1.indd
MPEGs containing DivX can be divided into Video and Audio.
• Video compatibility : All versions of DivX later than 3.11 (including
the latest 5.1) are supported. In addition, XviD is supported.
• Audio compatibility : MP3s encoded at bit rates from 8kbps to
320kbps, AC3s from 32kbps to 640kbps, and WMAs from 48kbps to
384kbps are supported.
• In addition, for subtitles, this unit will support Text format (SMI).
• When playing the DivX disk, you can play the file with extension of AVI only.
• Among the available DivX audio formats, DTS Audio is not supported.
• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
• MPEG 1 Layer 1 (MP1) is not supported.
20
22-23
2010-3-4
8:46:36
Playing Media Files using the USB feature
USB Host Specification
You can connect and play files from external USB storage devices such as MP3 players,
USB flash memory, etc. using the player's USB function.
USB Host Specification
1
2
Connect the USB
cable.
Press the FUNC.
button on the main set
or the AUX button on
the remote control to
select the USB mode.
Non-compliance
Operational Limitations
• “USB” appears on the display screen
and then disappear.
•
USB SORTING screen appears on the
TV screen and the saved file is played.
ENG
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type cable.
• Supports UMS (USB Mass Storage Device) V1.0 compliant devices.
• Supports the device of which the connected drive is formatted in the FAT(FAT, FAT16,
FAT32) file system.
• Does not support a device that requires installing a separate driver on the PC (Windows).
• Does not support connection to a USB hub.
• A USB device that is connected using the USB extension cable may not be recognized.
• A USB device requiring a separate power source needs to be connected to the player
with the separate power connection.
• If the connected device has multiple drives (or partitions) installed, only one drive
(or partition) can be connected.
• A device supporting USB 1.1 alone may cause a difference in the picture quality,
depending on the device.
Compliant Devices
OPERATION
1. USB Storage Device
2. MP3 Player
3. Digital Camera
To stop playback, press the STOP (
Note
4. Removable HDD
• Removable HDDs equipped with less than 160 Gbytes are supported. Removable HDDs
equipped with 160Gbytes or more may not be recognized, depending on the device.
• If the connected device does not work due to insufficient power supply, you can use a separate
power cable to supply power so that it can work properly. The connector of the USB cable may
differ, depending on the manufacturer of the USB device.
) button.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
• Video files (DivX, MPEG, etc.) are supported.
• To prevent the loss of data saved in the USB device, please turn the unit off or
switch it to another mode before disconnecting the USB cable.
• The play order is as follow: MP3/WMA
DIVX
Compliant File Formats
JPEG.
Skip Forward/Back
During playback, press the
or
• When there is more than a file, when you press the
• When there is more than a file, when you press the
,
,
,
button, the next file is selected.
button, the previous file is selected.
or
• Each time you press either button, the playback speed will change as follows:
x 8
or  x 2
• To resume normal playback, press PLAY (
21
MM-C330D-Asia-ENG-1.indd
File extension
Bit rate
Version
Pixel
Sampling
Frequency
Still Picture
JPG
JPG .JPEG
–
–
640x480
–
MP3
.MP3
8~320kbps
–
–
44.1kHz
WMA
.WMA
V8
–
44.1kHz
DivX3.11~
DivX5.1, XviD
720x480
44.1KHz~48KHz
x 4
x 8
) button.
button
Stereo:48~384kbps
Music
Mono:64~192kbps
Movie
To play back the disc at a faster speed, press
during playback.
x 4
File name
button.
Fast playback
x 2
Format
DivX
.AVI
4Mbps
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected to a
PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• MPEG 1 Layer 1 (MP1) is not supported.
22
24-25
2010-3-4
8:46:39
Displaying Disc Information
Fast/Slow Playback
ENG
You can view playback information on the disc on the TV screen.
Fast Playback
Press
Press INFO button.
• Press Cursor
,
DVD
CD
MP3
buttons .
• Each time you press either button
buttons select the desired item.
during playback,
the playback speed changes as follows:
DVD
DVD
• What is a Title?
A movie contained in a DVD disc.
Each title on a DVD disc is divided into several smaller sections called "chapters".
•
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
• What is a Track (File)?
A section of video or a music file recorded on a CD, or MP3-CD.
CD
16
16
32
32
128
128
OPERATION
• What is a Chapter?
MP3
Display disappears
• To resume normal playback, press PLAY (
) button.
Slow Playback
Note
• Depending on the disc, the disc
information display may appear different.
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
DivX
• In Pause mode or Slow mode or Step mode,
button to select as
you can use the
below:
• To resume normal playback, press PLAY (
Note
23
MM-C330D-Asia-ENG-1.indd
26-27
) button.
• During fast playback of a CD or MP3-CD, sound is not heard.
• No sound is heard during slow playback and step motion playback.
24
2010-3-4
8:46:42
Skipping Scenes/Songs
Angle Function
ENG
This function allows you to view the same scene in different angles.
DVD
MP3
CD
Briefly press
DVD
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will
be played.
• But, you cannot skip chapters consecutively.
DVD
MP3
1
CD
Press ANGLE
button.
2
Press Cursor ,
buttons or numeric
buttons to select the
desired angle.
• Each time the button is pressed,
1/3
the angle changes as follows:
OPERATION
Skip
Track01
1/3
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track02
2/3
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Skip
Track01
Track01
Track02
Track03
Track04
Track05
Track06
Track07
3/3
Note
Playing Frame by Frame
DVD
Press STEP button.
DivX
• The Angle function works only with discs on which multiple angles
have been recorded.
Step
• The picture moves forward one frame each time
the button is pressed during playback.
25
MM-C330D-Asia-ENG-1.indd
26
28-29
2010-3-4
8:46:45
Repeat Playback
A B Repeat Playback
ENG
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
CD
MP3
DIVX
DVD
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback
mode changes as follow:
DVD
1
CD
MP3
DIVX
Press the REPEAT A-B
button at the point where you
want repeat play to start (A).
2
'RPT A-' is displayed.
,
'RPT A-B' is displayed.
button to select one mode
OPERATION
• Press the REPEAT button or cursor
Press the REPEAT A-B
button at the point where you
want repeat play to stop (B).
then press ENTER button.
• Select
• Select
• Select
• Select
: Cancel Repeat playback.
: Repeat playback one Chapter.
: Repeat playback one Title.
: Repeat playback A-B.
DIVX
MP3
CD
Track
Track
Track
Folder
Folder
Disc
Off
Disc
Shuffle
Shuffle
Off
3
To return to nomal play, press
the REPEAT A-B button again.
'RPT OFF-' is displayed.
Off
• The A-B Repeat function does not operate with JPEG disc.
• The time space of point A and B should be more than 5 seconds.
Repeat Playback Options
Track
Repeatedly plays the selected track.
Folder
Repeatedly plays all tracks in the
selected folder.
Shuffle
Plays tracks in random order.
(Each track can be played one time.)
Off
Cancels Repeat Playback.
Disc
Repeatedly plays the entire disc.
27
MM-C330D-Asia-ENG-1.indd
28
30-31
2010-3-4
8:46:55
Selecting Audio/Subtitle Language
Zoom Function
ENG
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
DVD
1
DivX
Audio Language Selection Function
JPEG
2
Press ZOOM
button.
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
1
Press INFO button.
2
DVD
Press Cursor ,
buttons to select the
Audio and then press
ENTER button.
Subtitle Language Selection Function
3
1
Press ENTER
button.
Press INFO button.
2
OPERATION
Note
3
Press Cursor ,
or numeric buttons to select the
desired Audio language and then
press ENTER button.
• Depending on the number of languages on a
DVD disc, a different audio language (ENGLISH,
SPAIN,FRENCH, etc.) is selected each time the
button is pressed.
DVD
Press Cursor ,
buttons to select the
Subtitle and then press
ENTER button.
3
Press Cursor ,
or numeric buttons to select the
desired Subtitle language and
then press ENTER button.
• Each time the button is pressed, the
zoom level changes as follow:
DVD
DivX
JPEG
2x
4x
OFF.
2x
4x
2x
OFF.
Note
• You can use the AUDIO or SUBTITLE button on the remote control to select an audio or subtitle language.
• Depending on the disc, the Subtitle and Audio Language functions may not work.
• When you use AUDIO button to select "DTS", sound is not heard, and the TV displays as below:
CHI DOLBY DIGITAL 5.1 CH
30
29
MM-C330D-Asia-ENG-1.indd
AUDIO
32-33
2010-3-4
8:46:58
Using Disc Menu
Moving Directly to a Scene /Song
ENG
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
Moving to a Title/Chapter
Press INFO button.
2
Press Cursor ,
buttons to select the
Title/Chapter.
DVD
1
In stop mode, press
MENU button.
Moving to a Title/Chapter
Press Cursor ,
or numeric buttons to
select the desired part and
then press ENTER button.
4
Moving to a Specific Time
Note
3
5
Press the numeric
buttons to select the
desired time and then
press ENTER button.
Press Cursor ,
buttons to select the
Time.
• You can press
on the
remote control to move directly to the
desired title, chapter.
• Depending on the disc, you may not
be able to move to the selected title or
time.
3
Press Cursor ,
buttons to select the
desired item and then
press ENTER button.
Disc Menu
4
Press Cursor ,
, buttons to select
the desired item and
then press ENTER
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
32
31
MM-C330D-Asia-ENG-1.indd
Moving to a Specific Time
OPERATION
Disc Menu
2
Press Cursor , buttons
to move to ‘DISC MENU’
and then press ENTER
button.
34-35
2010-3-4
8:47:04
Using the Title Menu
Setting the Language
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
OSD language is set to English by default.
DVD
1
In stop mode, press
MENU button.
2
Press Cursor ,
button to move to
‘Title Menu’ and
then press ENTER
button.
1
In stop mode, press
MENU button.
2
Press Cursor ,
button to move to
‘Setup’ and then
press ENTER button.
3
ENG
Press Cursor ,
button to select the
desired item and then
press ENTER button.
Disc Menu
OPERATION
Disc Menu
3
Press Cursor ,
buttons to select the
desired item and then
press ENTER button.
4
Press Cursor ,
, buttons to select
the desired item and
then press ENTER
button.
4
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language
was set to English, OSD will be displayed in
English.
Selecting the
Player Menu Language
Selecting the
Disc Menu Language
(recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
33
MM-C330D-Asia-ENG-1.indd
Selecting the
Audio Language
(recorded on the disc)
Selecting the Subtitle Language
(recorded on the disc)
language will not change even if
you set it to your desired
language.
Selecting the Subtitle Language
(recorded on the disc)
Press MENU or EXIT button to exit the setup screen.
Press RETURN button to return to the previous level.
36-37
34
2010-3-4
8:47:09
Setting TV Screen type
1
In stop mode, press
MENU button.
2
ENG
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
Disc Menu
16:9 Wide
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
3
Press Cursor ,
button to move to
‘Display Setup’ and
then press ENTER
button.
4
Press Cursor ,
button to 'Tv Aspect'
and then press
ENTER button.
(4:3 Letter box)
4:3PS
(4:3 Pan&Scan)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
SETUP
• You can select '4:3 Letter Box', '4:3
Pan&Scan' or '16:9 Wide' mode for
your TV.
4:3LB
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
5
Press Cursor ,
button to move to
‘Screen Messages’
and then press
ENTER button.
• You can select 'On' or 'Off'.
On: you can see the screen messages.
Off: you can't see the screen messages.
6
Press Cursor ,
button to 'Video
Output' and then
press ENTER button.
• You can select 'I-SCAN' or 'P-SCAN'.
(see the page 12 about P-SCAN or
I-SCAN mode.)
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
35
MM-C330D-Asia-ENG-2.indd
34-35
36
2010-3-4
8:48:11
1
Setting Parental Controls (Rating Level)
Setting the Password
Use this to restrict playback of adult or violent DVDs you do not want children to view.
You can set the password for the Parental (rating level) setting.
In stop mode, press
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Press Cursor button
to move to ‘Parental
Setup’ and then press
ENTER button.
1
In stop mode, press
MENU button.
ENG
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor , button
to select the 'Change
Password' and then press
ENTER button.
Disc Menu
Disc Menu
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
5
5
Enter the password
and then press
ENTER button.
SETUP
4
Press Cursor , button
to select the 'Rating Level'
and then press ENTER
button.
3
Press Cursor button to
move to ‘Parental
Setup’ and then press
ENTER button.
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
Note
• This function works only if a DVD disc
contains the rating level information.
37
MM-C330D-Asia-ENG-2.indd
36-37
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press CANCEL button to cancel the error numeric when you inputting password.
Press EXIT button to exit the setup screen.
Press MENU button to exit the setup screen.
38
2010-3-4
8:48:22
Setting the DRC (Dynamic Range Compression)
AV SYNC Setup
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
In stop mode, press
MENU button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
1
Disc Menu
In stop mode, press
MENU button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
Disc Menu
4
Press Cursor ,
adjust the ‘DRC’.
to
• You can set the DRC between 0 and 8.
Set it to the optimal status.
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
4
SETUP
3
Press Cursor , button
to select the 'DRC' and
then press ENTER button.
ENG
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press
the ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
39
MM-C330D-Asia-ENG-2.indd
38-39
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
40
2010-3-4
8:48:30
Presetting Stations
Listening to Radio
You can store up to:
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
Remote Control Unit
1
Press TUNER
button.
ENG
15 FM stations
Example: Presetting FM 89.1 in the memory
2
Tune in to the
desired station.
Press the STOP ( ) button
to select PRESET and then
press TUNING or button to select the
preset station.
1
Press the TUNER
button and select
the FM band.
Automatic Tuning 1
2
Press TUNING
or
to select
"89.10".
3
Press the TUNER
MEMORY button.
• Refer to Step 2 on page 41
to automatically or manually
tune in to a station.
Press the STOP ( ) button to
select "AUTO" and then press
TUNING
or
button to automatically
search the band.
Automatic Tuning 2
kHz
kHz
kHz
Press STOP ( ) to select
Manual Tuning MANUAL
and then briefly press
TUNING
to tune in to a lower or
or
higher frequency.
Main Unit
2
Select a broadcast
station.
Automatic Tuning 1
press
station.
Press the STOP ( ) button
to select PRESET and then
button to select the preset
4
Press TUNING
or
to select
preset number.
• You can select between 1 and
5
6
Press the TUNER
MEMORY button.
To preset another
station, repeat
steps 2 to 5.
RADIO OPERATION
1
Press the FUNC.
button to select the
FM band.
• If you can’t press “TUNER MEMORY” in 5
15.
seconds, the preset disappears and “FM”
displays.
Press the STOP ( ) button to
select "AUTO" and then press
button to automatically search the
Automatic Tuning 2
band.
Press STOP ( ) to select
Manual Tuning MANUAL
and then briefly
press
to tune in to a lower or
higher frequency.
MO
MO
kHz
kHz
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
41
MM-C330D-Asia-ENG-2.indd
40-41
42
2010-3-4
8:48:35
Listening to a Cassette
Recording a Radio Program
Always treat your cassettes with care; refer, if necessary, to the section entitled
“Precautions When Using Audio Cassettes” on page 55.
You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch the system
on by pressing
POWER.
3
Press the PUSH
EJECT of the
cassette deck to
open the cassette
door and insert a
cassette.
2
4
Press FUNC. on the
player or TAPE on
the remote control to
select the Tape
function.
Press the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
5
button.
• Rewind the cassette
• Fast-forward the cassette
6
FUNC.
button on the remote
control. The cassette
starts playing.
• Insert a cassette with the
Press the
button if necessary.
ENG
1
Switch the system
on by pressing
POWER.
2
4
Select the radio
station that you wish
to record by pressing
button .
5
Insert a blank
cassette in Deck.
3
Select the
TUNER function
by pressing
TUNER.
6
To stop recording,
press
button.
When you have
finished playback,
press STOP button.
button.
and recording starts.
TAPE DECK
• R is displayed
44
43
MM-C330D-Asia-ENG-2.indd
Press REC button.
42-43
2010-3-4
8:48:39
Recording a Compact Disc
ENG
You can record a compact disc on a cassette in two different ways:
Synchronized recording
Direct recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.
The direct recording mode enables you to start recording with any track on the compact disc.
1
Switch the system
on by pressing
POWER.
2
Insert a blank
cassette in Deck.
• Open the cassette door, insert a
cassette, and then close the
cassette door.
• Insert the cassette with the safety
tabs.
FUNC.
1
Switch the system
on by pressing
POWER.
2
Insert a blank
cassette in Deck.
• Open the cassette door, insert a
cassette, and then close the
cassette door.
• Insert the cassette with the safety
3
Load a compact
disc.
• Use the CD selection (
)
buttons to select the desired song.
5
• R is displayed and recording starts.
• When stopped, press the button to
start the recording from the first piece
of music.
• Press and hold REC button during
the playback of CD to start the
recording from the first part of the
music being played.
• Use the CD selection (
)
buttons to select the desired song.
• Insert a CD and press the OPEN/
• Press the OPEN/CLOSE button to
open the CD door.
• Insert a CD and press the OPEN/
CLOSE button to close the CD door.
6
To stop recording,
press
button.
5
Press
REC button.
6
To stop recording,
press
button.
• Recording will begin.
• R is displayed and recording starts.
• To stop recording, press button.
Note
• Synchronized recording Function is
available for CD only.
Note
• The cassette tape you want to record on must have the safety tabs intact.
46
45
MM-C330D-Asia-ENG-2.indd
open the CD door.
TAPE DECK
4
Press and hold
REC button.
• Press the OPEN/CLOSE button to
4
Press the
PLAY/PAUSE
( ) button.
CLOSE button to close the CD door.
tabs.
Press the
PLAY/PAUSE
( ) button.
3
Load a compact
disc.
44-45
2010-3-4
8:48:42
CD RIPPING Function
Timer Function
ENG
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options.
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
If you exceed this time, you must start again.
1
Switch the system
on by pressing
POWER.
4
Press CD
RIPPING button
on remote control
to starting ripping.
2
5
¡ If the system is playing state, press this button,
“TRACK RIPPING” is displayed and CD
RIPPING starts.
¡ If the system is playing state, press and hold this
button, “FULL CD RIPPING” is displayed and CD
RIPPING starts.
¡ During CD ripping, do not disconnect USB
device.
Connect the
USB.
To stop ripping, press
STOP( )button.and
then automatically
create and save as
the MP3 file.
After CD-Ripping,a directory named
“RIPPING FOLDER” will be created in your
device.The file name is same with the disc.
3
Load a compact
disc(Digital
Audio).
Press the OPEN/CLOSE button to open
the CD door.
Insert a CD and press the OPEN/CLOSE
button to close the CD door.
Use the CD selection (
to select the desired song.
Example: You wish to wake up to music every morning.
1
◆ Don’t disconnected USB and AC Cord during CD-Ripping.This may cause
the file damage. If you want to stop CD-Ripping during CD-Ripping, you must
press stop Key first and after the CD Stopped, then you can remove the USB
device.
◆ DTS-CD can’t for CD Ripping.
◆ With external HDD, FAT format the USB can be CD Ripping, but not NTFS.
The CD Ripping function of this product does not support all USB devices.
◆ When you use CD high speed search function or in the Pause or Stop mode,
the CD Ripping can’t work.
◆ During CD Ripping, do not deal impact.If is shocked while CD Ripping, CD
Ripping maybe disengage.
◆ Sometimes, some of USB devices, CD Ripping time is long.
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
4
◆ When CD Ripping completes or Stops, the CD will reload.
• The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
MM-C330D-Asia-ENG-2.indd
or
7
Press or button
to select the source to
be played when the
system switches on.
• TUNER (radio) :
a Press ENTER.
b Select a preset station by pressing
or .
• DVD/CD (compact disc) :
Load on or more compact disc.
• TAPE(cassette): Insert a cassette tape.
• USB :Insert a USB.
6
Set the timer
switch-off time.
a. Set the hour by pressing
button.
b. Press ENTER.
of the equalizer symbols) for a few
seconds, followed by any switchoff time already set; you can now
set the timer switch-off time.
• The source to be selected is
or
• The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
Press or button
to adjust the volume
level and press
ENTER.
displayed.
or
• VOL 10 is displayed, where 10
corresponds to the volume
already set.
8
Press ENTER to
confirm the timer.
9
•
Press POWER to
set the system to
standby mode.
is displayed to the top right of
the time, indicating that the timer
has been set.
• The system will switch on and off
automatically at the required
times.
• If the timer switch on and off times are identical, the word ERROR is displayed.
• If there is no tape, disc or usb, when you select the “DVD/CD, USB, it will automatically change
to “TUNER”.
46-47
or
• OFF TIME is displayed (instead
Note
47
5
Set the timer
switch-on time.
48
2010-3-4
MISCELLANEOUS
◆ In program mode, you can't use CD RIPPING function.
3
Press the ENTER
button.
• ON TIME is displayed (instead
◆ If you disconnected USB device when CD Ripping, the main unit will be
power off and you may not delete the ripped file, In this case, please connect
the USB on the PC and backup the USB data on the PC first and then
formate the USB device .
◆ When the USB memory is not enough, it will be displayed “RIPPING
ERROR”.
Press TIMER/
CLOCK until
TIMER is
displayed.
) buttons
a. Set the hour by pressing
button.
b. Press ENTER .
Note
2
Switch the system
on by pressing
POWER.
8:48:44
Canceling the Timer
After having set the timer, it will start automatically as shown by the TIMER indication on the
display. If you no longer wish to use the timer, you must cancel it.
Power Sound/Power Bass/
Treble Level/Bass Level Function
ENG
POWER SOUND/POWER BASS Function
To cancel the timer, press TIMER
ON/OFF once.
•
Your micro-compact system is equipped with the function of POWER SOUND mode .
The function of POWER SOUND mode amplifies bass and improves high key or bass twice as much for
you to appreciate powerful real sound.
Your micro-compact system has a bass amplification function called SBS (Super Bass Sound).
This function makes the sound more powerful and real.
Press the P.SOUND button.
is no longer displayed.
When CD Ripping,the P.SOUND, P.BASS
function can’t work and the P.SOUND,
P.BASS automatically covert to “OFF” mode.
Each time the button is pressed, the selection changes as
follows: P.SOUND P.BASS OFF
To resume the timer, press TIMER
ON/OFF again.
•
is displayed again.
Treble Level Function
Treble Control function stresses high tones providing
thudding sound effects.
Press TREB/BASS button ,
TREB 00 is displayed.
• Press the
TUNING
-04 to TREB 04.
,
button to select from TREB
•You can select the level of high tones you desire.
• You can cancel the timer while the power is on or while the player is in standby.
Bass Level Function
BASS function stresses low tones providing thudding sound
effects.
• Press the TUNING
to BASS 04.
,
•You can select the level of low
tones you desire.
50
49
MM-C330D-Asia-ENG-2.indd
button to select from BASS -04
48-49
2010-3-4
MISCELLANEOUS
Press TREB/BASS button ,
BASS 00 is displayed.
8:48:48
DSP/EQ Function
Sleep Timer Function / Mute Function
ENG
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Selecting DSP/EQ
Your micro-compact system is equipped with a
preset equalizer that allows you to choose the
most appropriate balance between treble and
bass frequencies, according to the type of
music you are listening to.
Press DSP/EQ on the remote control until
the required option is selected.
To obtain a...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for class
Balance suitable for jazz
Balance suitable for s.bass
Select...
PASS
POP
ROCK
CLASSIC
JAZZ
S.BASS
Press SLEEP button.
• Each time the button is pressed, the selection changes as follows:
90 MIN
60 MIN
45 MIN
30 MIN
15 MIN
SLEEPOFF.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
the button again changes the sleep time from what you have set
•Pressing
earlier.
To cancel the sleep timer, press SLEEP button until
SLEEPOFF appears on the display.
When CD Ripping,the DSP/EQ function can’t work and the
DSP/EQ automatically covert to “PASS” mode.
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
buttons.
52
51
MM-C330D-Asia-ENG-2.indd
50-51
2010-3-4
MISCELLANEOUS
• ‘MUTE ’ appears in the display.
• To switch the sound back on , press MUTE again or press the VOLUME
8:48:50
DEMO Function / DIMMER Function
Connecting Headphones/Microphone
ENG
You can connect a set of headphones to your micro component system so that you can listen
to music or radio programmers without disturbing other people in the room. The headphones
must have a 3.5ø jack or an appropriate adapter.
You can also insert microphone to sing along with your favorite Cds.
DEMO Function
You can view the various functions available on your system.
Press DEMO/DIMMER button.
• The various functions available are listed in turn on the display.
• All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sections.
DIMMER Function
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press DEMO/DIMMER button.
• Each time the button is press, the brightness changes as follows:
DEMO ON(Dim)
DIMMER ON(Dim)
DIMMER OFF(Bright).
Note
Press any buttons to cancel DEMO function.
When you turn off the main unit, DEMO function will be auto start
after 10 senconds. if you want to cancel this DEMO function, press
DEMO/DIMMER button again.
Connect the headphones
to the PHONES jack on
the front panel.
• The loudspeakers are no longer used to
output the sound.
Plug a microphone with a 3.5ø MIC
jack into the Mic terminal.
• Connect one Microphone.
• Press the MIC VOL button to adjust the MIC level.
• Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
• Prolonged use of headphones at a high volume may damage your hearing.
53
MM-C330D-Asia-ENG-2.indd
54
52-53
2010-3-4
MISCELLANEOUS
Note
8:48:53
Cautions on Handling and Storing Discs
Before Calling for Service
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Symptom
Disc tray does not open.
Playback does not start.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
Precautions When Using Audio Cassettes
Playback does not start
immediately when the Play/
Pause button is pressed.
Sound is not produced.
• When you have finished playing a cassette, always put it back in its case.
• Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high
temperatures.
• Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism.
• Check the region number of the DVD.
•
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Make sure that the rating level is correct.
• Is the remote control being operated within its operation range of
angle and distance?
• Are the batteries exhausted?
• Are you using a deformed disc or a disc with scratches on
•
the surface?
Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
•
motion playback.
Are the speakers connected properly? Is the speaker setup
correctly customized?
Is the disc severely damaged?
Picture does not appear, sound • Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
is not produced, or the disc
and let the player stand for 1 or 2 hours with the power on. (You
tray opens 2 to 5 seconds later. can use the player again after condensation disappears.)
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
56
55
54-55
2010-3-4
MISCELLANEOUS
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
MM-C330D-Asia-ENG-2.indd
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
•
• Check that the tape in the cassette is sufficiently taut.
• To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the
cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive
tape.
Check/Remedy
•
The remote control does
not work.
ENG
8:48:55
Notes on Discs
Symptom
Audio language and
subtitles do not work.
Menu screen does not appear even
when the menu function is selected.
Check/Remedy
• Audio language and subtitles will not work for DVDs not containing
them. And depending on the disc, they may work differently.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
The tape does not start
playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
antenna in an area with good reception.
• Turn off the power and hold the STOP
for longer than 5 seconds.
button on the main unit
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
the player is in the No Disc mode, hold the main unit's STOP
• While
button for longer than 5 seconds. “INITIAL” appears on the display and
all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Disc Recording Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
the disc.
• Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minute as they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be
able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc
can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~
320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc
can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
DVD R/RW, CD-R/RW DivX Discs
• Software updates for incompatible formats are not supported.
(Example : QPEL, GMC, resolution higher than 720 x 480 pixels, etc.)
• Sections with a high frame rate might not be played while playing a DivX file.
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX
Ultra Certified device that plays DivX video.
58
57
MM-C330D-Asia-ENG-2.indd
56-57
2010-3-4
MISCELLANEOUS
The password for rating
level has been forgotten.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
ENG
8:48:57
Notes on Terminology
ANGLE
CHAPTER
NUMBER
DVD
PCM
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Specifications
RADIO
FM
Signal/noise ratio
62 dB
Usable sensitivity
10 dB
Total harmonic distortion
0.4 %
COMPACT DISC PLAYER
Capacity
1 disc
Frequency range
20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio
90 dB (at 1 KHz) with filter
Distortion
0.1 % (at 1 KHz)
Channel separation
75 dB
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAPE
Frequency range
125 Hz ~ 10 KHz
Signal/noise ratio
40 dB
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
Channel separation
35 dB
Erasing effect
50 dB(without filter)
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
AMPLIFIER
SUBTITLES
Front Speaker(8 Ω)
35W/CH X2 RMS,IEC (total harmonic distortion: 10 %)
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
Channel separation
60 dB
Signal/noise ratio
70 dB
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
GENERAL
TRACK NUMBER
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
ENG
Output power
Power consumption
35W
Dimensions
251(W) x 154 (H) x 230 (D) mm
Weight
2.2 Kg
MISCELLANEOUS
60
59
MM-C330D-Asia-ENG-2.indd
58-59
2010-3-4
8:48:58
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Region
North America
Latin
America
Europe
CIS
Asia Pacific
Country
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG (726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG (726-7864)
0-800-100-5303
01-8000112112
BELGIUM
02 201 2418
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
EIRE
AUSTRIA
SWITZERLAND
RUSSIA
KAZAKHSTAN
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
UKRAINE
BELARUS
MOLDOVA
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
800-SAMSUNG (800-726786)
8-SAMSUNG (7267864)
30-6227 515
01 4863 0000
01805-SAMSUNG (726-7864 € 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
02 261 03 710
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
3-SAMSUNG (7267864)
0 801 1SAMSUNG (172678), 022-607-93-33
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
0845 SAMSUNG (7267864)
0818 717 100
0810-SAMSUNG (7267864, € 0.07/min)
0848-SAMSUNG (7267864, CHF 0.08/min)
8-800-555-55-55
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
8-800-502-0000
810-800-500-55-500
00-800-500-55-500
8-800-77777
8000-7267
800-7267
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858, 010-6475 1880
3698-4698
3030 8282, 1800 110011, 1800 3000 8282
0800-112-8888
0120-327-527
1800-88-9999
1-800-10-SAMSUNG (726-7864), 1-800-3SAMSUNG (726-7864),
1-800-8-SAMSUNG (726-7864), 02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
444 77 11
0860-SAMSUNG (726-7864 )
800-SAMSUNG (726-7864), 8000-4726
PHILIPPINES
Middle
East &
Africa
MM-C330D-Asia-ENG-2.indd
60
Customer Care Center
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
NICARAGUA
HONDURAS
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
SINGAPORE
THAILAND
TAIWAN
VIETNAM
TURKEY
SOUTH AFRICA
U.A.E
WebSite
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com/us
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.com/lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ie
www.samsung.com/at
www.samsung.com/ch
www.samsung.ru
www.samsung.com/kz_ru
www.samsung.com/kz_ru
www.samsung.ua
www.samsung.com/lt
www.samsung.com/lv
www.samsung.com/ee
www.samsung.com/au
www.samsung.com/nz
www.samsung.com/cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/tr
www.samsung.com/za
www.samsung.com/ae
2010-3-4
8:48:59
Download PDF