Samsung | MAX-DJ750 | Samsung MAX-DJ750 User Manual

3 DVD MINI
COMPONENT SYSTEM
DVD/VCD/CD/MP3-CD/CD-R/RW
PLAYBACK
THIS APPLIANCE IS MANUFACTURED BY:
MAX-DJ750
Instruction Manual
SOUND
SLEEP
OPEN/CLOSE
DIMMER
DISC SKIP
ZOOM
SLOW
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
BAND
VOLUME
TUNING
U
MEN
INFO
MU
TE
RN
TU
RE
ENTER
TEST TONE
SOUND EDIT
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
AH59-01379B
COMPACT
DIGITAL AUDIO
AH68-01592B
COMPACT
DIGITAL VIDEO
NTSC/PAL
DIGEST
LOGO SLIDE MODE
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUCT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE REAR COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Precautions
PREPARATION
Safety Warnings
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
1
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
PREPARATION
Contents
Features
PREPARATION
Multi-Disc Playback & AM/FM Tuner, TAPE
The MAX-DJ750 combines the convenience of multi-disc playback capability,
including DVD-VEDIO, DVD-AUDIO,CD, MP3-CD, CD-R, CDRW,VCD,DivX,JPEG and DVD-R/RW, with a sophisticated AM/FM tuner, TAPE,
all in a single player.
TV Screen Saver Function
The MAX-DJ750 automatically brightens and darkens the brightness of
the TV screen after 3 minutes in the stop mode.
The MAX-DJ750 automatically switches itself into the power saving
mode after 20 minutes in the screen saver mode.
Power Saving Function
The MAX-DJ750 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
The MAX-DJ750 allows you to select your favorite image during JPEG,
VCD/DVD playback and set it as your background wallpaper.
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Safety Warnings ............................................................................................................................................................................................1
Precautions....................................................................................................................................................................................................2
Features.........................................................................................................................................................................................................3
Description.....................................................................................................................................................................................................5
CONNECTIONS
Connecting the Speakers ..............................................................................................................................................................................9
Connecting to a TV ........................................................................................................................................................................................11
P.SCAN(Progressive Scan) Function ............................................................................................................................................................12
Connecting External Components .................................................................................................................................................................13
Connecting the FM,AM and SW(option) Antennas........................................................................................................................................14
Setting the Clock............................................................................................................................................................................................15
OPERATION
Disc Playback ................................................................................................................................................................................................16
Bonus Group/Navigating pages ...................................................................................................................................................................18
DivX Playback................................................................................................................................................................................................19
Displaying Disc Information ...........................................................................................................................................................................21
Fast/Slow Playback .......................................................................................................................................................................................22
Skipping Scenes/Songs.................................................................................................................................................................................23
Angle Function...............................................................................................................................................................................................24
Repeat Playback............................................................................................................................................................................................25
A-B Repeat playback ....................................................................................................................................................................................27
Zoom Function...............................................................................................................................................................................................28
Selecting Audio/Subtitle Language................................................................................................................................................................29
Moving Directly to a Scene/Song...................................................................................................................................................................30
JPEG File Playback .......................................................................................................................................................................................31
Using Disc Menu............................................................................................................................................................................................33
Using the Title Menu......................................................................................................................................................................................34
SETUP
Setting the Language.....................................................................................................................................................................................35
Setting TV Screen type..................................................................................................................................................................................37
Setting Parental Controls (Rating Level) .......................................................................................................................................................39
Setting the Password.....................................................................................................................................................................................40
Setting the Wallpaper ....................................................................................................................................................................................41
DVD Playback Mode .....................................................................................................................................................................................43
AV SYNC Setup ............................................................................................................................................................................................44
Setting the Speaker Mode ............................................................................................................................................................................45
Setting the Test Tone ...................................................................................................................................................................................46
Setting the Delay time ...................................................................................................................................................................................47
Setting the Audio Quality ..............................................................................................................................................................................49
Setting the DRC (Dynamic Range Compression) .........................................................................................................................................51
Dolby Pro Logic I I Mode ..............................................................................................................................................................................53
Dolby Pro Logic I I Effect ..............................................................................................................................................................................54
RADIO OPERATION
Copy Protection
Listening to Radio ..........................................................................................................................................................................................55
Presetting Stations.........................................................................................................................................................................................56
TAPE DECK
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
•
3
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Listening to a Cassette ..................................................................................................................................................................................57
MISCELLANEOUS
Recording a Compact Disc ............................................................................................................................................................................60
Recording a Radio Program ..........................................................................................................................................................................62
Timer Function...............................................................................................................................................................................................63
Canceling the Timer.......................................................................................................................................................................................64
P.SOUND/SOUND MODE Function .............................................................................................................................................................65
Sleep Timer Function / Mute Function...........................................................................................................................................................66
DEMO Function / DIMMER Function ............................................................................................................................................................67
Bass/Treble level (USER EQ) Function.........................................................................................................................................................68
Connecting Headphones/Microphone(option) ...............................................................................................................................................69
Cautions on Handling and Storing Discs .......................................................................................................................................................70
Before Calling for Service ..............................................................................................................................................................................71
Notes on Discs...............................................................................................................................................................................................73
Notes on Terminology....................................................................................................................................................................................74
Specifications.................................................................................................................................................................................................75
4
27
26
25
8
9
10
11
24
12
23
28.
29.
30.
31.
32.
33.
34.
35.
13 14 15 16 17 18 19 20 21 22
—Display Window—
19 18 17
4
5
6
7
8
9
5
10 11 12
16.
17.
18.
19.
8.
WOOFER
AUX IN
R
Connect the TV's video input jacks (VIDEO IN) to
the VIDEO OUT connector.
3
SPEAKERS(6)
VIDEO OUT
7. Video Output Connector
If the TV is equipped with an S-Video input
connector (S-VIDEO IN), connect it to the
player's S-Video output jack.
Y
PR
S-Video Output Connector
L
COMPONENT VIDEO OUT
R
4
L
CENTER
LINE OUT
5
SPEAKERS(6)
REAR
R
9.
AUX-In
10. Voltage Selector (Option)
L
FRONT
10
9
6
8 7
Accessories
OPEN/
CLOSE
DISC
SLEEP
SKIP
DIMM
ER
ZOOM
REPEA
T
SLOW
REMA
IN
TUNER
BAND
TAPE
SUB
TITLE
AUX
VOLUM
E
TUNIN
G
MENU
MUTE
ENTER
TEST
TIMER/C
LOCK
RETURN
13
16
15
14
13
TAPE REVERSE MODE
TUNER PRESET
TUNER MEMORY TO PROGRAM
TUNER PRESET NUMBER
TITLE
CD SYNCHRO RECORDING
PBC
CD REPEAT MODE
FM MODE (STEREO)
POWER SOUND
SLEEP
CLOCK
VOLUME
RECORDING
MAIN DISPLAY
(FUNCTION, FREQUENCY,TIME,ETC.)
PLAYING DISC NUMBER
TAPE 1/2
TAPE RUNNING INDICATION
CHAPTER
2
INFO
1
2
3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
AM
FM
(75)
S.VIDEO
Connect a TV with component vide input jacks to
these jacks.
1
ANTENNA
-
4
5
6
7
4. 5.1 Channel Speaker Output Terminals
5. LINE OUT
6. Component Video Output Connectors
-
28
2. AM Antenna Connectors
3. FM Antenna Connector
+
3
1. SW Antenna Connector (Option)
+
29
SOUND
—Rear Panel—
-
2
SOUND MODE
STANDBY/ON
TREBLE LEVEL
ECHO
MIC LEVEL
FUNCTIONS SELECT BUTTONS
MIC 1,MIC 2
REC/PAUSE
PHONES
TAPE 1/2
DUBBING
CASSETTE DECK 1
REVERSE MODE
CD SYNCHRO
COUNTER RESET
FM MONO/ST
TIMER/CLOCK
TIMER ON/OFF
TUNER MEMORY
SLEEP
DISPLAY
CD REPEAT
CASSETTE DECK 2
DEMO/DIMMER
MULTI JOG
ENTER
SEARCH FUNCTION BUTTONS OR STOP
OR TUNING MODE
VOLUME+,POWER SOUND
COMPACT DISC COMPARTMENT
CD OPEN/CLOSE
DISC CHANGE
DISC SELECTION BUTTONS
WINDOW DISPLAY
BASS LEVEL
-
30
1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
+
33 32 31
34
35
+
—Front Panel—
PREPARATION
Description
TONE
SOUND
TIMER
EDIT
ON/OFF
AH59-0137
EZ/VIEW
9B
NTSC/P
AL
CANCE
L
P.SCAN
DIGEST
LOGO
SLIDE
MODE
Remote Control
AM Antenna
Video Cable
Audio Cable
FM Antenna
User's Manual
6
PREPARATION
Description
—Remote Control—
Insert Remote Batteries
1
ZOOM button
POWER STANDBY/ON button
SLEEP button
OPEN/CLOSE button
DIMMER/DEMO button
SLOW,MONO/ST button
SUB TITLE button
REMAIN (TAPE 1/2)
DISC SKIP button
REPEAT button
TUNER button
TAPE PLAY button
AUX button
Play/Pause button
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Stop button
Tuning Preset/CD/TAPE Skip button
PL II MODE button
PL II EFFECT button
TUNING button
VOLUME button
MENU button
INFO button
RETURN button
MUTE button
Direction/Enter button
TEST TONE
Number(0~9) buttons
TIMER/CLOCK button
TIMER ON/OFF button
EZ VIEW, NTSC/PAL button
7
TEST TONE button
SOUND EDIT button
TUNER MEMORY / P.SCAN button
DIGEST button
SLIDE MODE button
CANCEL button
LOGO button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
8
Connecting the Speakers
Connect the connecting jacks (4) to the back of mini-compact system.
CONNECTIONS
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
ANTENNA
AM
FM
(75)
SPEAKERS(6)
Make sure the colors of the speaker terminals match the colors of the connecting jacks.
Make sure the polarities (+and -) are correct.
L
R
AUX IN
+
VIDEO OUT
WOOFER
COMPONENT VIDEO OUT
-
S.VIDEO
R
PB
PR
Y
+
L
CENTER
LINE OUT
Front Speaker (R)
SPEAKERS(6)
+
Front Speaker (L)
REAR
R
L
+
FRONT
-
Woofer
Woofer
R.SW
L.SW
L.SW
R.SW
Center Speaker
Violet
SPEAKERS(6)
Violet
C
C
L
R
+
WOOFER
-
Green
+
CENTER
-
Blue
SPEAKERS(6)
Gray
+
REAR
L
+
Red
R
FRONT
-
White
RS
LS
RS
LS
Rear Speaker (R)
R.SW
• Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
SPEAKERS(6)
WOOFER
slightly downward.
CENTER
SPEAKERS(6)
REAR
-
*
Unlike the front and center speakers, the rear speakers are used
to handle mainly sound effects and sound will not come from
them all the time.
L
R
+
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be
at the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front
speakers.
Connect the connecting jacks to
the back of the DVD player.
-
L.SW
Back of the Main Unit
-
Speakers/Woofer
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
+
or under the TV stand.
+
Position of the DVD Player
• Place it on a stand or cabinet shelf,
Rear Speaker (L)
Selecting the Listening Position
R
L
+
FRONT
-
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
9
10
Connecting to a TV
P.SCAN (Progressive Scan) Function
Please be sure to turn off the power and unplug the power cord before moving or installing this unit.
Please choose one of three video connection methods.
Method 1
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without
visible scan lines.
Using Video Out (Good Quality)
Supplied
Connect Video Out on the player to Video In on your TV.
2
Press the TV/VIDEO button on the remote of TV control to
set the TV to "VIDEO".
Press and hold P.SCAN button on the remote controller for over 5 seconds in
STOP mode.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
repetitively.
ANTENNA
AM
FM
(75)
SPEAKERS(6)
What is Progressive (or Non-Interlaced) Scanning?
WOOFER
AUX IN
R
L
+
VIDEO OUT
S.VIDEO
COMPONENT VIDEO OUT
-
R
Y
PB
PR
+
L
CENTER
LINE OUT
+
Interlaced Scan (1 FRAME = 2 FIELDS)
R
L
+
-
Method 2
Progressive Scan (FULL FRAME)
Using S-Video Out (Better Quality )
Use this method if your TV has an S-Video In jack.
ANTENNA
AM
+
R
FM
(75)
L
SPEAKERS(6)
L
-
1
Connect S-Video Out to S-Video In on your TV.
WOOFER
AUX IN
VIDEO OUT
L
+
R
+
S.VIDEO
R
COMPONENT VIDEO OUT
-
L
PB
-
PR
Y
+
R
CENTER
LINE OUT
+
SPEAKERS(6)
-
Not Supplied
L
+
+
L
Press the TV/VIDEO button on the remote control of TV to set
the TV to "S-VIDEO".
FRONT
-
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
If you television is equipped with Component Video inputs,connect a
component video cable from the Pr,Pb and Y jacks on
the back panel of the system to the corresponding jacks on your television.
COMPONENT
IN
ANTENNA
AM
Note
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
FM
(75)
SPEAKERS(6)
WOOFER
AUX IN
+
R
S.VIDEO
VIDEO OUT
L
COMPONENT VIDEO OUT
L
PR
PB
Y
+
R
CENTER
LINE OUT
SPEAKERS(6)
•
L
Not Supplied
R
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
R
L
-
Use this method if your TV have Pr,Pb andY jacks.
-
Component Video (Best Quality)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
+
Method 3
+
2
REAR
R
+
R
REAR
+
R
L
+
+
-
FRONT
-
11
L
Selecting the Video Format
-
• Composite Video: A single video signal that is a composite of
the black-and-white information (Y) and the color information (C).
• S-Video: A video transmission standard that provides a sharper,
brighter picture than ordinary composite video by separating
brightness and color signals.
R
+
Note
Turn off the main unit and then press NTSC/PAL on the Remote Control or REC/PAUSE on the Main Unit.
• By default, the video format is set to "PAL".
• Each time the button is pressed, the video format switches between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.
12
CONNECTIONS
1
Connecting the FM, AM(MW) and SW(option) Antennas
Connecting External Components
Connecting an External Analog Component
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
Example: Analog signal components such as a VCR, Camcorder, and TV.
CONNECTIONS
AM Loop Antenna
(supplied)
FM Antenna (supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
ANTENNA
AM
FM
(75)
SPEAKERS(6)
WOOFER
AUX IN
R
L
COMPONENT VIDEO OUT
-
VIDEO OUT
+
S.VIDEO
L
PB
Y
+
PR
R
CENTER
LINE OUT
SPEAKERS(6)
SPEAKERS(6)
Spread the SW aerial out and attach the
ends to a wall, in the position providing the
best reception.
If reception is poor (e.g. distance from
transmitter too great, walls blocking the
radio waves, etc.), install an outdoor aerial.
+
-
WOO
AUX IN
R
L
+
COMPONENT VIDEO OUT
FM antenna connection
Y
+
PR
-
VIDEO OUT
+
R
S.VIDEO
L
R
L
CEN
-
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
L
SPEAKERS(6)
RE
+
R
R
L
+
FRO
-
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
2
Press AUX to select AUX.
Cooling Fan
• Be sure to match connector colors.
AM (MW) antenna connection
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
• ‘AUX’ appears in the display.
could rise and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
L
R
+
-
14
+
L
+
R
L
+
-
13
R
Setting the Clock
Disc Playback
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
2
Switch the system
on by pressing
POWER button.
Press TIMER/CLOCK
twice.
• CLOCK is displayed.
3
Selecting a CD in the Disc changer
Press ENTER.
The hour flashes.
The CD function is automatically selected when Disc Skip is pushed.
SLEEP
OPEN/CLOSE
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
• Increase the hours :
• Decrease the hours :
BAND
To select a specific disc, press the corresponding DISC (1, 2, 3) button on the front panel or
DISC SKIP on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
• If you use the DISC (1, 2, 3) function when listening to the radio or to a tape, the
5
VOLUME
• You can display the time, even
TUNING
PL II
EFFECT
PL II
MODE
when you are using another
function, by pressing
TIMER/CLOCK once.
U
MEN
DVD
INFO
RN
TU
RE
• Increase the minutes :
• Decrease the minutes :
When the correct
time is displayed,
press ENTER.
M
UT
E
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
• "TIMER" appears in the display.
• The current time is now set.
•
DVDAUDIO
VCD
CD
Playback starts automatically.
MP3
JPEG
DivX
• Playback starts automatically.
• If the TV is on, a list of MP3s on
Note
can also use Multi-Jog or
instead of
,
buttons in step 3,4.
button on the panel front
SOUND EDIT
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
Checking the Remaining Time
AH59-01379B
DIGEST
LOGO SLIDE MODE
NTSC/PAL
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
the CD will appear on the TV
screen.
TEST TONE
•You
OPERATION
system switches automatically to the CD mode.
• If the disc selected is not loaded, the next disc is played automatically.
Note
Note
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some MP3-CDs cannot be played.
• Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter being played.
To stop playback,
press STOP during playback.
Each time the REMAIN button is pressed
TITLE ELAPSED
• If pressed once, “PRESS PLAY” is displayed and the
TRACK ELAPSED
GROUP ELAPSED
DVD
TITLE REMAIN
CHAPTER ELAPSED
CHAPTER REMAIN
VCD
CD
TRACK REMAIN
TOTAL ELAPSED
MP3
DVDAUDIO
GROUP REMAIN
TRACK ELAPSED
TOTAL REMAIN
TRACK REMAIN
15
To temporarily pause playback,
press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE
button again.
•
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
16
Bonus Group / Navigating Pages
Disc terminology
Groups and tracks (DVD-AUDIO)
• DVD-audios are divided into several large sections called "groups" and smaller
sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
GROUP 1
TRACK 1
TRACK 2
Bonus Group
GROUP 2
TRACK 3
TRACK 1
DVDAUDIO
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
TRACK 2
OPEN/CLOSE
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
Titles and chapters (DVD-VIDEO)
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
BAND
• DVD-videos are divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
VOLUME
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 1
TUNING
PL II
EFFECT
PL II
MODE
TITLE 2
KEY NUMBER :
OPERATION
TITLE 1
CHAPTER 2
U
MEN
INFO
M
UT
E
RN
TU
RE
Tracks (Video and music CDs)
Note
• Video and music CDs are divided into sections called "tracks".
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
Numbers are allotted to these sections. These numbers are called "track numbers".
the key number.
TEST TONE
SOUND EDIT
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
AH59-01379B
Note
• In this manual, the instructions marked with "DVD (
DVD )" are applicable to
DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
DIGEST
Navigating Pages
DVDAUDIO
LOGO SLIDE MODE
NTSC/PAL
During playback, press the
remote control.
button on the
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be able to select images depending on how the
disc was manufactured.
17
18
DivX Playback
5 Minute Skip function
During playback, press the
Skip Forward/Back
During playback, press the
button.
button.
button.
button.
• Go to the next file whenever you press
button, if there are over
2 files in the disk.
• Go to the previous file whenever you press
button, if there are over
2 files in the disk.
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
VOLUME
TUNING
PL II
EFFECT
PL II
MODE
• Each time the button is held down during playback,
Press the SUBTITLE button.
• Each time you press the button, your selection will toggle between “SUBTITLE ON” and “SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
• Up to 8 subtitle languages are supported.
Fast playback
button.
Subtitle Display
OPERATION
OPEN/CLOSE
BAND
Press and hold
,
• Go to the screen about 5 minutes after whenever you press
• Go to the screen about 5 minutes earlier whenever you press
the playback speed changes as follows:
U
MEN
INFO
M
UT
E
RN
TU
RE
DivX Feature Table
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
TEST TONE
SOUND EDIT
SPEC
VIDEO Compatibility
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
Zoom Function
1
Press ZOOM
button.
AH59-01379B
AUDIO Compatibility
LOGO SLIDE MODE
NTSC/PAL
Up to the latest VERSION
WMV V1/V2/V3/V7
MP3
CBR : 80kbps~384kbps
AC3
CBR : 128kbps~384kbps
WMA
CBR : 56kbps~128kbps
• Audio compatibility : MP3s encoded at bitrates from 80kbps to
384kbps, AC3s from 128kbps to 384kbps, and WMAs from 56kbps
to 128kbps are supported.
• In addition, for subtitles, this unit will support Text format (SMI).
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
Note
• When playing the DivX disk, you can play the file with extension of AVI only.
• Among the available DivX audio formats, DTS Audio is not supported.
• WMV V8 is not supported for WMV files.
• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
• Divx Disc does not playing when its sampling frequency is lower than 32KHz.
• Some of the discs recorded in DivX or XviD depending on the way of recording could be
played back not correctly or couldn’t be played back at all.
Note
19
DIGEST
DivX3.11
WMV
MPEGs containing DivX can be divided into Video and Audio.
• Video compatibility : All versions of DivX later than 3.11 (including
the latest 5.1) are supported. In addition, XviD is supported.
For WMV, V1, V2, V3, and V7 formats are possible.
The initial resolution is 720X480 and may support up to 720X576 .
• DivX files can be played in
Zoom X2 mode only.
20
Displaying Disc Information
Fast/Slow Playback
You can view playback information on the disc on the TV screen.
Fast Playback
Press and hold
Press INFO button.
VCD
CD
CD
MP3
.
the playback speed changes as follows:
MP3
JPEG
DivX
OPEN/CLOSE
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
OPERATION
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
BAND
VOLUME
Display disappears
VCD
• Each time the button is held down during playback,
• Each time the button is pressed, the display changes as follows:
DVD
DVD
Display disappears
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
Slow Playback
INFO
M
UT
E
RN
TU
RE
Press SLOW button.
Display disappears
• Each time the button is pressed during playback,
the playback speed changes as follows:
• What is a Title?
A movie contained in a DVD disc.
Note
• What is a Chapter?
• Depending on the disc, the disc
information display may appear different.
• Depending on the disc, you can also
TEST TONE
Each title on a DVD disc is divided into several smaller sections called "chapters".
•
select DOLBY DIGITAL, or PRO LOGIC.
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
• What is a Track (File)?
DVD
VCD
DivX
SOUND EDIT
P.SCAN
TIMER/CLOCK
TIMER ON/OFF
AH59-01379B
CANCEL
DIGEST
LOGO SLIDE MODE
NTSC/PAL
A section of video or a music file recorded on a VCD, CD, or MP3-CD.
Screen Display
DVD display
MP3 CD display
VCD display
TRACK (FILE) display
CD display
21
DOLBY DIGITAL display
SUBTITLE display
ANGLE display
REPEAT PLAYBACK display
CHAPTER display
GROUP display
Note
• Reverse slow playback does not work with VCDs and DivX.
TRACK (FILE) display
TITLE display
DVD DVD-AUDIO display
AUDIO
AUDIO LANGUAGE display
STEREO (L/R) display
DivX display
• During fast playback of a CD or MP3-CD, sound is heard only at
2x speed, and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion
playback.
22
Skipping Scenes/Songs
Angle Function
This function allows you to view the same scene in different angles.
DVD
VCD
DVD
MP3
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter,
•
VCD
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
MP3
1
2
Press Cursor
button to move to
ANGLE display.
1/3
1/3
BAND
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
VOLUME
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
SMART NAVI
INFO
RN
TU
RE
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
M
UT
E
DVD RECEIVER
3
Press Cursor , buttons or numeric buttons
to select the desired angle.
• Each time the button is pressed, the angle changes as follows:
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
1/3
TEST TONE
2/3
SOUND EDIT
3/3
• When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
AH59-01379B
DIGEST
LOGO SLIDE MODE
NTSC/PAL
Note
23
• The Angle function works only with discs on which multiple angles
have been recorded.
24
OPERATION
DVD
SLEEP
OPEN/CLOSE
track, or directory (file) will be played.
But, you cannot skip chapters consecutively.
Press INFO button.
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
DVD
VCD
CD
MP3
JPEG
SLEEP
OPEN/CLOSE
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
MP3
JPEG
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
Repeat Playback Options
BAND
button once.
VOLUME
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
INFO
M
UT
E
3
TRACK
Repeatedly plays the selected track.
CD
Press Cursor
button to select the
desired Repeat
Playback mode.
4
Press ENTER
button.
DVD
DIR
Repeatedly plays all tracks in the
selected folder.
TEST TONE
SOUND EDIT
DISC
Repeatedly plays the entire disc.
P.SCAN
TIMER/CLOCK
OFF
Cancels Repeat Playback.
2
Press Cursor button
to move to REPEAT
PLAYBACK display.
•For a VCD or CD,Press INFO
RN
TU
RE
RANDOM
Plays tracks in random order.
(A track that has already been played
may be played again.)
1
Press INFO button
twice .
CANCEL
TIMER ON/OFF EZ/VIEW
AH59-01379B
NTSC/PAL
DIGEST
LOGO SLIDE MODE
VCD
CD
Note
• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on.
Note
To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the disc menu. (See page 33.)
• For MP3 and JPEG discs, you cannot select Repeat Play
from the information display screen.
25
26
OPERATION
TITLE
Repeatedly plays the selected title.
DIMMER
DISC SKIP
CHAPTER
Repeatedly plays the selected chapter.
VCD
CD
To Select a Repeat Playback Mode
in the Disc Information Screen
Press REPEAT button.
DVD
VCD
A↔B Repeat Playback
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
DVD
1
VCD
CD
Zoom (Screen Enlarge) Function
Press INFO button
twice.
2
Press Cursor
button to move to
REPEAT PLAYBACK
( ) display.
SLEEP
OPEN/CLOSE
DIMMER
DISC SKIP
ZOOM
SLOW
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
MONO/ST
• For a VCD or CD, press INFO
button once.
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
DVD
3
VCD
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
BAND
• When ENTER button is pressed,
the selected position will be stored in
memory.
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
INFO
M
UT
E
4
Press ENTER
button at the end of
the desired
segment.
RN
TU
RE
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
Aspect Ratio
• The specified segment will be played
repeatedly.
A-
OPERATION
SELECT ZOOM POSITION
VOLUME
DVD
A-B
REPEAT : A—B
TEST TONE
SOUND EDIT
Press EZ VIEW button.
A -?
P.SCAN
REPEAT : A—
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
DIGEST
LOGO SLIDE MODE
NTSC/PAL
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Wide screen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
To return to normal playback, press Cursor
to select
OFF.
, buttons
EZ VIEW
EZ VIEW OFF
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
27
28
Selecting Audio Subtitle Language
Audio Language Selection Function
1
2
Press INFO button
twice.
Moving Directly to a Scene/Song
DVD
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
OPEN/CLOSE
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
• Depending on the number of languages on a
1
VCD
CD
Moving to a Title/Track
Press INFO button.
2
Moving to a Chapter
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
3
Press Cursor ,
buttons to move to
Chapter display.
BAND
01/05
VOLUME
001/040
0:00:37
1/1
001/002
03/05
0:00:01
1/1
01/05
001/040
0:00:01
1/1
TUNING
PL II
EFFECT
PL II
MODE
SP 2/3
Moving to a Chapter
Moving to a Specific Time
Moving to a Specific Time
FR 3/3
U
MEN
1
2
Press INFO button
twice.
M
UT
E
RN
TU
RE
Subtitle Language Selection Function
INFO
DVD
Press Cursor
button to move to
SUBTITLE display.
4
Press Cursor , buttons
or numeric buttons to select
the desired chapter and
then press ENTER button.
01/05
025/040
0:00:01
5
1/1
Press Cursor ,
buttons to move to
time display.
025/040
01/05
1:17:30
6
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
1/1
028/040
1:30:00
1/1
TEST TONE
SOUND EDIT
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
EN 1/3
EN 01/ 03
SP 02/ 03
FR 03/ 03
OFF / 03
29
OFF
Note
• You can use the SUBTITLE button on the
•
remote control to select a subtitle
language.
Depending on the disc, the Subtitle and
Audio Language functions may not work.
DIGEST
LOGO SLIDE MODE
NTSC/PAL
MP3
JPEG
Press the numeric
buttons.
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
Move
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
Note
SELECT 03
Select
Stop
• You can press
•
on the remote
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
from the disc information screen.
• When playing an MP3 or JEPG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
30
OPERATION
DVD disc, a different audio language (ENGLISH,
SPAIN,JAPANESE, etc.) is selected each time
the button is pressed.
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Slide Mode
Digest Function
You can view 9 JPEG images on the TV screen.
1
Place the JPEG disc on the disc tray.
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
Press DIGEST
button during
playback.
2
• JPEG files will be shown in
• The selected image is played for 5 seconds before moving to
9 windows.
the next image.
Press the OPEN/CLOSE button.
VOLUME
PL II
EFFECT
U
MEN
INFO
M
UT
E
RN
TU
RE
3
TUNING
PL II
MODE
• Playback starts automatically.
• Each image is shown for 5 seconds before another image is displayed.
OPERATION
BAND
2
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
To view the previous or next image with 9 windows, press
.
Press SLIDE MODE button.
Rotate/Flip Function
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
TEST TONE
From top to bottom
SOUND EDIT
P.SCAN
From bottom to top
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
Press Cursor
,
,
,
buttons during playback.
DIGEST
LOGO SLIDE MODE
NTSC/PAL
Rectangular shape in the center
button: Flip Vertically
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be randomly and automatically be applied.
31
button: Rotate 90° Clockwise
Original Image
Cancels the slide mode.
Press
button: Rotate 90°
Counterclockwise
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
button: Flip Horizontally
32
Using Disc Menu
Using the Title Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
DVD
SLEEP
1
In stop mode,Press
MENU button.
• When playing a VCD (version 2.0),
this toggles between PBC ON and
OFF.
2
Press Cursor , buttons
to move to ‘DISC MENU’
and then press ENTER
button.
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
BAND
1
In stop mode Press
MENU button.
2
Press Cursor ,
button to move to
‘Title Menu’.
• When you select the disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
3
Press ENTER button.
• The title menu appears.
TUNING
VOLUME
PL II
EFFECT
PL II
MODE
P.SCAN
INFO
U
MEN
M
UT
E
RN
TU
RE
4
Press ENTER button.
OPERATION
3
Press Cursor , ,
, buttons to select
the desired item.
TEST TONE
SOUND EDIT
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
DIGEST
LOGO SLIDE MODE
NTSC/PAL
Press MENU button to exit the setup screen.
Note
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be
disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
33
34
Setting the Language
OSD language is set to English by default.
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
In stop mode,Press
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Press ENTER
button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
BAND
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
VOLUME
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
INFO
M
UT
E
RN
TU
RE
SETUP
TEST TONE
SOUND EDIT
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
DIGEST
LOGO SLIDE MODE
NTSC/PAL
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Disc Menu
Language (recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
35
36
Setting TV Screen type
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
In stop mode,Press
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
BAND
WIDE
VOLUME
TUNING
• You can enjoy the wide screen aspect.
PL II
EFFECT
PL II
MODE
U
MEN
INFO
M
UT
E
RN
TU
RE
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
4:3LB
(4:3 Letter box)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
4:3PS
(4:3 Pan&Scan)
SETUP
TEST TONE
SOUND EDIT
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
be taken to the previous screen.
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
DIGEST
LOGO SLIDE MODE
NTSC/PAL
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
37
38
1
Setting the Password
Use this to restrict playback of adult or violent DVDs you do not want children to view.
You can set the password for the Parental (rating level) setting.
in stop mode,Press
MENU button.
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
1
4
• The password is set to "7890" by default.
• Once the setup is complete, you will be
Press MENU button.
Press ENTER
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
SETUP
4
Setting Parental Controls (Rating Level)
• Enter the old password, a new
password, and confirm new password.
taken to the previous screen.
• The setting is complete.
Note
• This function works only if a DVD disc
contains the rating level information.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press CANCEL button to cancel the error numeric when you inputting password.
39
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
40
Setting the Wallpaper
JPEG
VCD
DVD
While watching a DVD,,VCD or JPEG CD, you can set the image you like as a wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when the image you
like comes up.
2
To Change the Wallpaper
Press LOGO
button.
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
Press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
BAND
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
VOLUME
COPY LOGO DATA
PAUSE
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
INFO
M
UT
E
TEST TONE
• The selected wallpaper will be displayed.
• You can repeat Steps 1 and 2 to set up to
3 wallpapers.
• The power will turn off and turn on
automatically and back on the display
mode.
SOUND EDIT
4
Press to select
the desired ‘USER’,
and then press
ENTER.
SETUP
RN
TU
RE
Note
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
DIGEST
LOGO SLIDE MODE
NTSC/PAL
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Select this to set the
Samsung Logo image as
your wallpaper.
41
Select this to set the desired
image as your wallpaper.
42
DVD Playback Mode
AV SYNC Setup
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
Press the MENU
button while the
disc tray is open.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
1
Press the MENU button.
• Setup menu appears.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
• 'Audio' menu appears.
BAND
VOLUME
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
INFO
M
UT
E
RN
TU
RE
3
Press Cursor
button to move to
‘DVD TYPE’ and then
press ENTER button.
4
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
switch to DVD AUDIO Play mode.
TEST TONE
SOUND EDIT
• AV-SYNC screen appears.
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
DIGEST
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
LOGO SLIDE MODE
NTSC/PAL
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video
•
contents contained in DVD
audio disc.
DVD AUDIO : set to play the default DVD
audio.
Note
• DVD Play mode is set to DVD
Press RETURN button to return to the previous level.
Audio as factory default setting.
Press RETURN button to return to the previous level.
43
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
44
SETUP
• Set steps 1 ~ 4 again if you want to
1
Setting the Speaker Mode
Setting the Test Tone
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
OPEN/CLOSE
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
BAND
VOLUME
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
4
Press RETURN button to return to the previous level.
M
UT
E
TEST TONE
• For C, LS, and RS, each time the button
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
SETUP
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
INFO
RN
TU
RE
3
In the Speaker
Setup, press the
ENTER button again.
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
SOUND EDIT
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
AH59-01379B
Press MENU button to exit the setup screen.
DIGEST
LOGO SLIDE MODE
NTSC/PAL
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
When manually testing using the TEST TONE button
Press TEST TONE button.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
• Test tone will be produced as follows:
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
45
•
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button.
Start
46
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
OPEN/CLOSE
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
3
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
BAND
VOLUME
TUNING
PL II
EFFECT
PL II
MODE
U
MEN
INFO
M
UT
E
RN
TU
RE
SETUP
TEST TONE
SOUND EDIT
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
AH59-01379B
NTSC/PAL
DIGEST
LOGO SLIDE MODE
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0.00 m
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
47
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR () SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0.00 m
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SPEAKER
48
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
OPEN/CLOSE
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
When adjusting the audio quality using the setup screen
In Stop mode,
press MENU
button.
2
BAND
VOLUME
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
When manually adjusting with the SOUND EDIT button
Method 2
Adjusting Front Speaker Balance
1
Press SOUND
EDIT button and
then press Cursor
, .
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
Press SOUND
EDIT button and
then press Cursor
, .
2
TUNING
PL II
EFFECT
PL II
MODE
TITLE
CHAP PRGM RDS RT
ST
TUNED
TITLE
CHAP PRGM RDS RT
ST
kHz
MHz
U
MEN
TUNED
TITLE
kHz
MHz
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
INFO
M
UT
E
RN
TU
RE
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
4
Press Cursor , ,
, buttons to select
the desired item and then
press ENTER button.
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
Adjusting Rear Speaker Level
4
DIGEST
Press SOUND
EDIT button and
then press Cursor
, .
Adjusting Subwoofer Speaker Level
5
SETUP
TEST TONE
SOUND EDIT
AH59-01379B
3
Press SOUND
EDIT button and
then press Cursor
, .
LOGO SLIDE MODE
NTSC/PAL
TITLE
CHAP PRGM RDS
ST
TUNED
TITLE
CHAP PRGM RDS RT
kHz
MHz
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
ST
TUNED
kHz
Note
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
49
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
50
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
In stop mode,Press MENU
button.
If “DRC” is selected,
press ENTER.
4
Press Cursor ,
adjust the ‘DRC’.
to
• The
Cursor
button is pressed, the greater the
effect, and the Cursor
button is pressed, the
smaller the effect.
BAND
VOLUME
3
TUNING
PL II
EFFECT
PL II
MODE
INFO
M
UT
E
RN
TU
RE
TEST TONE
SOUND EDIT
2
SETUP
U
MEN
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
Press RETURN button to return to the previous level.
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
51
DIGEST
LOGO SLIDE MODE
NTSC/PAL
Press MENU button to exit the setup screen.
52
Dolby Pro Logic II Mode
Dolby Pro Logic II Effect
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
This function works only in Dolby Pro Logic MUSIC mode.
OPEN/CLOSE
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
1
Press
PL II MODE
button to select ‘MUSIC’
mode.
2
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select either 0 or 1.
BAND
TITLE PBC CHAP PRGM RDS RT
TITLE PBC CHAP PRGM RDS RT
VOLUME
TA
ST
TUNING
TA
ST
CMX
TUNED
TUNED
kHz
MHz
MPEG
kHz
MHz
PL II
EFFECT
PL II
MODE
U
MEN
INFO
M
UT
E
RN
TU
RE
3
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
TITLE PBC CHAP PRGM RDS RT
TEST TONE
TA
• You can select between 0 and 6.
ST
TUNED
DSP TITLE PBC CHAP PRGM RDS RT
SOUND EDIT
TA
CMX
kHz
MHz
MPEG
ST
TUNED
kHz
MHz
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF EZ/VIEW
AH59-01379B
Note
DIGEST
LOGO SLIDE MODE
NTSC/PAL
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
Note
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• MOVIE: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
53
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
54
SETUP
• You can select between 0 and 7.
4
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
Listening to Radio
Presetting Stations
You can store up to:
You can listen to the chosen band (FM, MW(SW1,2) broadcast stations) by using
either the automatic or manual tuning operation.
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
Remote Control Unit
1
Tune in to the
desired station.
Automatic Tuning 1
• The selection toggles back
and forth between "FM ➝ MW
➝(SW1,2)" each time the
TUNER(BAND) button is
pressed.
15 FM stations
15AM stations
Example: Presetting FM 89.1 in the memory
2
Press TUNER/
BAND button.
or
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
MONO/ST
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
Press
button to select
the preset station.
BAND
Automatic Tuning 2
1
Press the
TUNER(BAND)
button and select
the FM band.
2
• Each time the button is pressed,
• Refer to Step 2 on page 41
the band switches between
"FM ➝ MW ➝(SW1,2)".
Press and hold
button
to automatically search the band.
VOLUME
3
Press
to
select "89.10".
Press the TUNER
MEMORY button.
• “PROGRAM” flashes in the
to automatically or manually
tune in to a station.
display.
TUNING
PROGRAM
PL II
EFFECT
PL II
MODE
Manual Tuning
Briefly press
kHz
button to
kHz
MHz
kHz
MHz
MHz
increase or decrease the frequency incrementally.
U
MEN
M
UT
E
RN
TU
RE
Main Unit
1
INFO
2
Select a broadcast
station.
TEST TONE
4
SOUND EDIT
Press the STOP ( ) button
to select PRESET and then
press
button or turn Multi Jog
Knob to select the preset station.
Automatic Tuning 1
P.SCAN
TIMER/CLOCK
CANCEL
TIMER ON/OFF
AH59-01379B
DIGEST
Press
to
select preset
number.
• You can select between 1 and
• Press the TUNER MEMORY button before
• ‘PROGRAM’ disappears from the display
and the station is stored in memory.
NTSC/PAL
PROGRAM
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
or turn Multi Jog Knob
to tune in to a lower or higher frequency.
(This applies only when listening to an FM station.)
55
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Note
kHz
kHz
MHz
Press MONO/ST button to listen in Mono/Stereo.
6
To preset another
station, repeat
steps 2 to 5.
‘PROGRAM’ disappears from the display.
15.
LOGO SLIDE MODE
the STOP ( ) button to
Automatic Tuning 2 Press
select "AUTO" and then press
button or turn Multi-Jog Knob to
automatically search the band.
5
Press the TUNER
MEMORY button.
RADIO OPERATION
Press the TUNER/BAND
button to select the
desired band (FM,
MW(SW1,2)).
MHz
• When listening AM/SW ,
(Dolby Pro Logic II)
button does not work.
To tune in to a preset station, press
remote control to select a channel.
on the
56
Listening to a Cassette
Selecting the Cassette Playback Mode
Always treat your cassettes with care; refer, if necessary, to the section entitled
“Precautions When Using Audio Cassettes” on page 70.
Your micro component system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically. (Deck 2 only).
Press REVERSE MODE until the appropriate
symbol is displayed.
SOUND
•
: One
•
: One
•
1
Switch the system
on by pressing
STANDBY ON.
2
Press TAPE on
the player to
select the Tape
function.
3
Press the PUSH
EJECT ( ) of the
cassette deck to open
the cassette door and
insert a cassette.
• Insert a cassette with the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
• Side A : Tape (
• Side B : Tape (
) button once.
) button twice
(Tape 2 only).
Press Tape 1/2 button to select the
cassette to be played.
57
5
Press the
,
button if necessary.
• Rewind the cassette
•
/ DOWN
button.
Fast-forward the cassette UP /
button.
6
When you have
finished playback,
press STOP button.
side of the cassette.
The other side of the cassette and then stops.
: Both sides of the cassette indefinitely until you
press stop.
Tape Counter
When playing a cassette in one of the cassette
decks, a counter is displayed to enable you to
take note of the counter value at the start of
each track to start playback at the
beginning of the track to which you wish to
listen.
•
•
TAPE DECK
4
Press the
button. The cassette
starts playing.
side of the selected cassette and then stops.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
Each cassette deck has a separate counter.
58
Recording a Compact Disc
Coping a Cassette(Dubbing)
You can record a compact disc on a cassette in two different ways:
You
can copy a cassette from Tape 1 to Tape 2.
•Normal speed dubbing in selecting Tape function mode.
•You do not need to adjust the volume, as it has no effect on the recording.
•Take care not to insert the tape to be copied in Tape 2, as it will be erased when
you start recording.
Synchronised recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice
only on Audio CD.
SOUND
1
Switch the system
on by pressing
STANDBY/ON.
2
Insert a blank
cassette in Tape 2.
3
Insert the tape to
be copied in Tape 1.
1
Switch the system
on by pressing
STANDBY/ON.
2
Insert a blank
cassette in Tape 2.
• Press the PUSH/EJECT button (
•
The appropriate indications are
displayed and the cassette in
Tape 1 is copied to the cassette
in Tape 2.
5
4
Press
STOP button.
• Use the CD selection (
,
)
buttons to select the desired song.
5
Note
Press CD SYNCHRO
button.
•
start the recording from the first
piece of music.
Press and hold CD SYNCHRO
button during the playback of CD to
start the recording from the first part
of the music being played.
)
to open the CD door.
Insert a CD and press the
OPEN/CLOSE button ( ) to close
the CD door.
6
To stop recording,
press
button.
• When stopped, press the button to
•
•In Recoding,DPL II doesn’t work.
59
Press the DVD/CD
(
) button.
• Press the OPEN/CLOSE button (
Note
•You can use CD/SYNCHRO button
only in CD Playback Mode.
•In Recoding,DPL II doesn’t work.
60
TAPE DECK
4
Press DUBBING
button to copy a
cassette.
)
to open the cassette door, insert a
cassette, and then close the cassette
door.
Insert the cassette with the safety
tabs.
3
Load a compact
disc.
Recording a Radio Program
Direct recording
You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on the recording.
The direct recording mode enables you to start recording with any track on the compact disc.
SOUND
SOUND
1
Switch the system
on by pressing
STANDBY/ON.
2
Insert a blank
cassette in Tape 2.
• Press the PUSH/EJECT button (
•
4
Press the DVD/CD
(
) button.
• Use the CD selection (
)
buttons to select the desired song.
)
to open the cassette door, insert a
cassette, and then close the cassette
door.
Insert the cassette with the safety
tabs.
5
Press
REC/ PAUSE
button.
• Recording will begin.
• To stop recording, press
3
Load a compact
disc.
• Press the OPEN/CLOSE button (
•
to open the CD door.
Insert a CD and press the
OPEN/CLOSE button ( ) to close
the CD door.
)
1
Switch the system
on by pressing
STANDBY/ON.
4
Select the radio
station that you wish
to record by pressing
/DOWN or UP/
button .
2
Insert a blank
cassette in Deck 2.
3
Select the
TUNER function
by pressing
TUNER/BAND.
5
Press(REC/PAUSE)
button.
6
To stop recording,
press
button.
Note
• The cassette tape you want to record
button.
on must have the safety tabs intact.
•In Recoding,DPL II doesn’t work.
recording starts.
Note
•In Recoding,DPL II doesn’t work.
61
62
MISCELLANEOUS
• REC is displayed in red and
Timer Function
Canceling the Timer
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options.
After having set the timer, it will start automatically as shown by the TIMER indication on the display.
If you no longer wish to use the timer, you must cancel it.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
1
Switch the system
on by pressing
STANDBY/ON.
2
Press
TIMER/CLOCK
until TIMER is
displayed.
3
To cancel the timer, press TIMER ON/OFF
once.
Press the ENTER
button.
•
is no longer displayed.
• ON TIME is displayed (instead
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
4
Set the timer
switch-on time.
a. Set the hour by pressing
or
button.
b. Press ENTER .
• The minutes flash.
c. Set the minutes by pressing
or
button.
d. Press ENTER.
• OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switchoff time already set; you can now
set the timer switch-off time.
7
Press or button
to select the source to
be played when the
system switches on.
•
b Select a preset
station by pressing
or .
CD (compact disc) : Load on or more
compact disc.
Note
63
Set the timer
switch-off time.
a. Set the hour by pressing
or
button.
b. Press ENTER.
• The minutes flash.
c. Set the minutes by pressing
or
button.
d. Press ENTER.
• VOL 10 is displayed, where 10
corresponds to the volume
already set.
6
PL II
MODE
To resume the timer, press TIMER ON/OFF
again.
PL II
EFFECT
•
is displayed again.
• The source to be selected is
displayed.
Note
TEST TONE
• You can cancel the timer while the power is on or while the player is in standby.
SOUND EDIT
P.SCAN
8
Press ENTER to
confirm the timer.
9
•
•
Press
STANDBY/ON to
set the system to
standby mode.
AH59-01379B
MISCELLANEOUS
• TAPE (cassette) : Insert a cassette
tape.
• TUNER (radio) : a Press ENTER.
5
Press or button
to adjust the volume
level and press
ENTER.
is displayed to the bottom
right of the time, indicating that
the timer has been set.
The system will switch on and off
automatically at the required
times.
• If the timer switch on and off times are identical, the word ERROR is displayed.
button to instead , button on the remote control in step 4,5,6,7.
•You can also use Multi Jog or
64
P.SOUND AND SOUND MODE Function
Sleep Timer Function / Mute Function
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
SOUND
SLEEP
DIMMER
DISC SKIP
ZOOM
SLOW
REPEAT
REMAIN
SUB TITLE
TUNER
TAPE
AUX
BAND
Press SLEEP button.
• Each time the button is pressed, the selection changes as follows:
90 MIN ➝ 60 MIN ➝ 45 MIN ➝ 30 MIN ➝ 15 MIN ➝ OFF.
kHz
MHz
VOLUME
TUNING
PL II
EFFECT
PL II
MODE
Selecting SOUND MODE
P.SOUND Function
Press the P.SOUND button on the
front panel.
Result: Press P.SOUND button on the front panel,
“P,SOUND,OFF” is displayed.
To cancel this function, press P.SOUND button again .
To confirm the sleep timer setting, press SLEEP button.
U
MEN
Turn SOUND MODE on the front panel or
Press SOUND MODE on the remote control
until the required option is selected.
M
UT
E
Your mini-compact system is equipped with a
preset equalizer that allows you to choose the
most appropriate balance between treble and
bass frequencies, according to the type of
music you are listening to.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
TEST TONE
SOUND EDIT
P.SCAN
TIMER/CLOCK
Select...
AH59-01379B
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
Balance suitable for voice
PASS
POP
ROCK
CLASSIC
USE EQ
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
CANCEL
TIMER ON/OFF
To obtain a...
INFO
RN
TU
RE
Your mini-compact system is equipped with the
function of Power Sound.
The function of Power Sound amplifies bass and
improves high key or bass twice as much for you
to appreciate powerful real sound.
DIGEST
LOGO SLIDE MODE
NTSC/PAL
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
• USER
MISCELLANEOUS
• ‘MUTE ’ appears in the display.
• To turn off mute, press the button again.
Note
EQ (TREBLE/BASS) Function please see page 68.
kHz
MHz
65
66
Bass/Treble Level (USER EQ) Function
DEMO Function / DIMMER Function
SOUND
BASS Level Function
BASS function stresses low tones providing thudding sound effects.
DEMO Function
You can view the various functions available on
your system.
Press DEMO/DIMMER button.
• The various functions available are listed in turn on the
•
display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the
appropriate sections.
67
You can adjust the brightness of the display on the main
unit so it won't interfere with your movie viewing.
1
Turn BASS knob on the front
panel to select from BASS -08
to BASS +08 , total 9 steps.
2
You can select the level of low
tones you desire.
Press DEMO/DIMMER button.
• Each time the button is press, the brightness changes as
TREBLE Level Function
follows: DIMMER ON(Dim) ➞ DIMMER OFF(Bright).
Treble function stresses low tones providing thudding sound effects.
1
Turn TREBEL knob on the
front panel to select from TRE
-08 to TRE +08 , total 9 steps.
2
You can select the level of
high tones you desire.
MISCELLANEOUS
To cancel this function, press
DEMO/DIMMER again.
DIMMER Function
68
Connecting Headphones/Microphone(option)
You can connect a set of headphones to your micro component system so that you
can listen to music or radio programmers without disturbing other people in the room.
The earphones must have a 3.5ø jack or an appropriate adapter.
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
SOUND
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
Connect the headphones to the PHONES jack on the front panel.
• The loudspeakers are no longer used to output the sound.
Note
• Prolonged use of headphones at a high volume may damage your hearing.
Precautions When Using Audio Cassettes
• Check that the tape in the cassette is sufficiently taut.
• To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the
cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive
tape.
When you have finished playing a cassette, always put it back in its case.
•
• Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high
temperatures.
• Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism.
Plug the microphone with a 6.3ø MIC jack into microphone terminal.
MISCELLANEOUS
• Connect the Microphone.
• Turn the MIC LEVEL knob to adjust the MIC volume.
• Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
• During using the microphone ,you can press the REC/PAUSE button to record your favorite.
69
70
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Audio language and
subtitles do not work.
• Check the region number of the DVD.
Menu screen does not appear even
when the menu function is selected.
•
•
The remote control does
not work.
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Make sure that the rating level is correct.
• Is the remote control being operated within its operation range of
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
71
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
them. And depending on the disc, they may work differently.
• Are you using a disc that does not contain menus?
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
The tape does not start
playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Audio language and subtitles will not work for DVDs not containing
The password for rating
level has been forgotten.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
antenna in an area with good reception.
• Turn off the power and hold the P.Suppound/P.Sound button on
the main unit for longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While the player is in “NO DISC” mode, hold the main unit's TUNING
MODE/ button for longer than 5 seconds. “INITIAL” appears on the
display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
72
MISCELLANEOUS
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Was the DVD player suddenly moved from a cold place to a warm
Check/Remedy
Aspect ratio cannot be
changed.
angle and distance?
• Are the batteries exhausted?
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
Play/Pause button is pressed. • Wipe the disc clean.
Sound is not produced.
Symptom
Notes on Discs
Disc Recording Format
Notes on Terminology
ANGLE
CD-R Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• If the name of a file is in Korean, the name will be displayed on the TV screen in Korean and * will be shown in the
•
•
•
•
•
•
•
display of the main unit.
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
Only files with the ".mp3" and ".MP3" extensions can be played.
Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the
disc can be played only up to the blank segment.
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
What is MP3?
MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts
Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3
format to record about 12 times the usual amount of data on a regular CD.
CHAPTER
NUMBER
DVD
PCM
73
An acronym for Pulse Code Modulation - another name for digital audio.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
74
MISCELLANEOUS
•
•
•
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
CD-R JPEG Discs
disc can be played only up to the blank segment.
A maximum of 9,999 images can be stored on a single CD.
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
PBC
(PLAYBACK
CONTROL)
TRACK NUMBER
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
Specifications
G
E
N
E
R
A
L
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
V
I
D
E
O
110W
Power Consumption
Weight
Dimensions (W x H x D)
T
F U
N
M E
R
T
A U
N
M E
R
O
U
T
P
U
T
A
M
P
L
I
F
I
E
R
Component Video
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
55dB
0.8%
60dB
35dB
2%
1.0Vp-p(75Ω load)
Luminance Signal : 1.0Vp-p(75Ω load)
Color Signal : 0.286Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
60W x 2(6Ω)
60W(6Ω)
60W x 2(6Ω)
75WX2(6Ω)
20Hz~20kHz
70dB
55dB
(AUX)500mV
5.1ch speaker system
Front/Wooferspeaker Center speaker
Impedance
6Ω x 2
Frequency range
150Hz~20kHz 30Hz~150Hz 150Hz~20KHz
6Ω x 2
Rear speaker
6ΩX2
6Ω
150Hz~20KHz
85dB/W/M
86dB/W/M
86dB/W/M
75W
60W
60W
Maximum input
150W
120W
120W
Dimensions (W x H x D)
120W
MISCELLANEOUS
Output sound pressure level 85dB/W/M
Rated input
60W
Weights
75
11Kg
370 x 332 x 270 mm
+5°C~+35°C
10%~75%
12dB
S-Video
Speaker system
S
P
E
A
K
E
R
Memo
258 x 330 x 390 mm 200 x 107 x 100 mm 200 x 107 x 100 mm
8.0 Kg
0.85 Kg
0.85 Kg
76
Download PDF

advertising