Samsung | MD65C | Samsung MD65C User Manual

LFD DISPLAY
User Manual
MD65C
The colour and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
BN46-00350C-00
Table of contents
Before Using the Product
Copyright7
Preparing before installing Wall-Mount
Installing the Wall Mount Kit
Wall Mount Kit Specifications (VESA)
29
29
30
Safety Precautions
8
Symbols8
Cleaning8
Storage9
Electricity and Safety
9
Installation10
Operation12
Remote Control (RS232C)
31
Cable Connection
31
Connection34
Control Codes
35
Preparations
Before Connecting
Pre-connection Checkpoints
44
44
Connecting to a PC
Connection using the D-SUB cable
(Analogue type)
Connection using a DVI cable (Digital type)
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
Connection Using an DP Cable
45
Changing the Resolution
Changing the Resolution on Windows XP
Changing the Resolution on Windows Vista
Changing the Resolution on Windows 7
Changing the Resolution on Windows 8
48
48
48
49
49
Connecting an External Monitor
50
Connecting to a Video Device
Connection Using the AV Cable
51
51
Checking the Contents
Removing the Packaging
Checking the Components
15
15
16
Parts19
Control Panel
19
Reverse Side
21
Assembling the Holder-Wire stand
22
Remote Control
23
Connection Using an IR Stereo Cable
(sold separately)
26
Before Installing the Product (Installation
Guide)27
Tilting Angle and Rotation
27
Ventilation27
Dimensions28
Installing the Wall Mount
29
Connection Using the component Cable
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
52
52
53
Connecting to an Audio System
54
Connecting the network box
(Sold separately)
55
MagicInfo55
Plug In Module58
Changing the Input source
59
Source59
Connecting and Using a Source
Device
45
46
46
47
47
Using MDC
Configuring Settings for Multi Control61
Configuring settings for Multi Control61
MDC Programme Installation/Uninstallation 63
Installation63
Uninstallation63
What is MDC?
64
Connecting to MDC
64
Connection Management
67
User Login68
Auto Set ID69
Cloning70
Command Retry
71
Getting Started with MDC
72
Main Screen Layout
73
Menus73
2
Table of contents
Screen Adjustment
Advanced features
Sound Adjustment
System Setup
Tool Settings
Other Functions
Group Management
Schedule Management
Troubleshooting Guide
75
78
80
80
89
92
93
95
97
Screen Adjustment
Picture Mode99
If the input source is PC, DVI or DisplayPort99
If the input source is AV, Component, HDMI1,
HDMI299
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)100
Screen Adjustment101
Picture Size101
Position103
Zoom/Position103
4:3 Screen Size104
PC Screen Adjustment104
Resolution Select105
Advanced Settings107
Dynamic Contrast108
Black Tone108
Flesh Tone108
RGB Only Mode108
Colour Space108
White Balance109
10p White Balance109
Gamma109
Expert Pattern110
Motion Lighting110
Network
Picture Options111
Colour Tone112
Colour Temp.112
Digital Noise Filter112
MPEG Noise Filter112
HDMI Black Level113
Film Mode113
Motion Plus113
Dynamic Backlight114
Soft AP130
Reset Picture114
Network Settings119
Connecting to a Wired Network
119
Wired Network Settings
121
Connecting to a Wireless Network
123
Wireless Network Setting
124
WPS(PBC)127
Network Status128
Wi-Fi Direct129
AllShare Settings131
Device Name131
System
Multi Control132
Configuring settings for Multi Control132
Auto Adjustment105
Sound Effect116
Time133
Clock Set133
Sleep Timer133
On Timer134
Off Timer135
Holiday Management135
Rotation106
Speaker Settings117
Menu Language136
Aspect Ratio106
Reset Sound118
Rotate menu137
Sound Adjustment
Sound Mode115
3
Table of contents
Eco Solution138
Energy Saving138
Eco Sensor138
No Signal Power Off138
Auto Power Off138
Security139
Safety Lock139
Button Lock139
Change PIN139
PIP140
Auto Protection Time141
Screen Burn Protection142
Pixel Shift142
Timer143
Immediate display144
Side Grey144
General149
Max. Power Saving149
Game Mode149
BD Wise149
Menu Transparency149
Sound Feedback150
Auto Power150
Standby Control150
Lamp Schedule151
OSD Display151
Power On Adjustment151
Temperature Control151
Anynet+ (HDMI-CEC)152
Anynet+ (HDMI-CEC)152
Auto Turn Off153
Troubleshooting for Anynet+
154
DivX® Video On Demand156
Ticker145
Play Mode156
Video Wall146
Video Wall146
Format146
Horizontal146
Vertical147
Screen Position147
Magic Clone157
Source AutoSwitch Settings148
Source AutoSwitch148
Primary Source Recovery148
Primary Source148
Secondary Source148
Reset System157
Reset All158
PC module power158
Synced power-on158
Synced power-off158
Support
Software Update159
By USB159
Contact Samsung160
Contents Home161
MagicInfo Lite161
MagicInfo Premium S161
MagicInfo Videowall S161
AllShare Play162
Source162
AllShare Play
What is AllShare Play?163
Read the following before using AllShare Play with
a USB device
163
Using a USB device
165
Connecting to a PC over a network
166
Using the AllShare Play features
167
Using the Basic AllShare Play Features
168
Sorting the file lists
168
Playing Selected Files
169
Copying Files
169
Creating a Playlist169
My list170
My list options
170
Videos171
4
Table of contents
Playing a Video
171
Photos172
Viewing a Photo (or Slide Show)
172
Music173
Playing Music173
Videos / Photos / Music Play Option menu
174
Supported Subtitle and AllShare Play file
formats176
Subtitle176
Supported image resolutions
176
Supported music file formats
177
Supported Video Formats
177
MagicInfo Lite
File Formats Compatible with MagicInfo Lite
player179
Read before using MagicInfo Lite player179
Approving a connected device from the
server184
MagicInfo Lite186
MagicInfo Lite player186
Local Schedule Manager189
Content manager196
Settings198
When Content is Running
200
MagicInfo Premium S
File Formats Compatible with MagicInfo
Premium S Player202
Read before using MagicInfo Premium S Player202
Testing the Product
Checking the Resolution and Frequency
Check the followings.
234
234
235
Q & A
245
Approving a connected device from the
server208
MagicInfo Premium S210
MagicInfo Premium S Player210
Local Schedule Manager213
Template Manager220
Content manager223
Settings225
When Content is Running
227
Specifications
General247
PowerSaver250
Preset Timing Modes
251
Appendix
MagicInfo Videowall S
File Formats Compatible with MagicInfo
Videowall S Player229
Read before using MagicInfo Videowall S Player229
MagicInfo Videowall S232
Settings232
When Content is Running
233
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Centre
234
Contact SAMSUNG WORLD WIDE
253
Responsibility for the Pay Service
(Cost to Customers)
262
Not a product defect
262
A Product damage caused by customer's fault 262
Others262
WEEE263
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
263
Correct disposal of batteries in this product
263
Optimum Picture Quality and Afterimage Burnin Prevention
264
Optimum Picture Quality
264
5
Table of contents
Prevention of Afterimage Burn-in
265
Licence267
Terminology268
6
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2013 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
-- (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
-- (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
7
Safety Precautions
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Caution
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
This symbol indicates that high voltage is present inside.
3
It is dangerous to make any kind of contact with any internal part of this product.
Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent or
surface-active agents.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
!
•• Do not spray water or detergent directly on the product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
Instructions marked by this symbol must be followed.
8
Storage
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create
whitecoloured stains on the product.
――Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
charged).
Electricity and Safety
•• Damage to the cord may result in a fire or electric shock.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
•• A fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
!
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
9
Installation
Caution
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• A fire may result.
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•• A fire or electric shock may result.
Have a technician install the wall-mount hanger.
!
•• Installation by an unqualified person can result in an injury.
•• Only use approved cabinets.
Keep the power socket where the power cord is connected unobstructed.
•• The power cord must be disconnected to cut off power to the product
when an issue occurs.
!
!
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•• Note that the product is not completely powered down by using only
the power button on the remote.
•• An increased internal temperature may cause a fire.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
Install the product at least 10cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
!
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
10
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
Caution
•• The product may fall and become damaged and/or cause an injury.
Do not drop the product while moving.
•• Using the product in an area with excess vibration may damage the
product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•• Product failure or personal injury may result.
!
Do not set down the product on its front.
•• A fire or electric shock may result.
•• The screen may become damaged.
!
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• The product lifespan may be reduced or a fire may result.
•• The product may fall and become damaged and/or cause an injury.
•• Install the product only on cabinets or shelves of the right size.
Do not install the product within the reach of young children.
•• The product may fall and injure children.
Set down the product gently.
•• As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
•• Product failure or personal injury may result.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport
or train station where the product should operate continuously for an
extended period of time) may seriously affect its performance.
•• Be sure to consult Samsung Customer Service Centre if you want to
install the product at such a place.
11
Operation
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
•• The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
During a lightning or thunderstorm, power off the product and remove the
power cable.
•• A fire or electric shock may result.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Centre for repairs.
!
Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
•• Damage to the cord may result in a fire or electric shock.
!
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Centre.
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•• Children may become injured or seriously harmed.
•• Sparks can cause an explosion or fire.
!
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Centre.
•• Continued use can result in a fire or electric shock.
GAS
Do not lift or move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
12
Do not use or keep combustible spray or an inflammable substance near
the product.
Caution
•• An explosion or fire may result.
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
!
Ensure the vents are not blocked by tablecloths or curtains.
•• Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
!
•• An increased internal temperature may cause a fire.
-_100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
!
Use the product at the recommended resolution and frequency.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•• Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•• The product may fall and become damaged or cause an injury.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
!
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
13
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
•• Eye fatigue will be relieved.
•• If children have had the battery in their mouths, consult your doctor
immediately.
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
When replacing the battery, insert it with the right polarity (+, -).
Store small accessories out of the reach of children.
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
•• Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
•• Otherwise, the batteries may be damaged or cause fire, personal injury
or damage due to a leakage of the internal liquid.
!
!
Exercise caution when adjusting the product angle or stand height.
The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
•• Your hand or finger may get stuck and injured.
!
•• Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
!
•• The customer can return used or rechargeable batteries to a nearby
public recycling Centre or to a store selling the same type of the
battery or rechargeable battery.
•• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
•• Having the sound too loud may damage your hearing.
14
Chapter 02
Preparations
Checking the Contents
3
Using the grooves in the box, lift and remove the top of the box.
4
Check the components and remove the styrofoam and plastic bag.
Removing the Packaging
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
――The appearance of actual components may differ from the image shown.
2
Remove the black locking device at the bottom of the box.
1
2
3
5
Store the box in a dry area so that it can be used when moving the product in the future.
15
Checking the Components
-- Contact the vendor where you
purchased the product if any
components are missing.
Components
――Components may differ in different locations.
-- The appearance of the components and
items sold separately may differ from the
image shown.
Warranty card
Quick setup guide
(Not available in some
locations)
User manual
MagicInfo Lite Edition Software
CD
Remote Control (P.23)
Power cord
D-SUB cable (P.45)
-
+
-
-- A stand is not provided with the product.
To install a stand, you can purchase one
separately.
+
Batteries (P.24)
(Not available in some locations)
Holder-Ring (4EA)
Holder-Wire stand
16
Items sold separately
-- The following items can be purchased
at your nearest retailer.
Wall-mount Kit
Stand
RS232C-Stereo cable (P.64)
DVI cable (P.46)
HDMI-DVI cable (P.46)
DP cable (P.47)
HDMI cable (P.47)
Video cable (P.51)
Stereo cable (P.26)
Component cable (P.52)
RCA stereo cable (P.54)
RCA cable (P.51)
AV/Component adapter (P.51)
AUDIO adapter (P.51)
-- The RS232C adapter can be used to
connect to another monitor using the
D-SUB (9-pin) type RS232C cable.
-- Ensure you connect each of the adapters
to the correct RS232C IN or OUT port on
the product.
17
DP-DVI cable
External sensor Kit (P.26)
RS232C(IN) adapter
Network Box
PIM
RS232C(OUT) adapter
LAN cable
(Used to connect a network
box)
18
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to
Parts
improve quality.
Panel Key
Control Panel
Buttons
Description
Power on the product.
If you press the
button when the product is turned on, the control menu will be
displayed.
――To exit the OSD menu, press and hold the panel key for at least one second.
Move to the upper or lower menu. You can also adjust the value of an option.
Move to the left or right menu.
――You can adjust the volume by moving the panel key left or right when the control
Speaker
menu is not displayed.
POWER
ON
Panel Key
Remote sensor
Receives signals from the remote.
――Using other display devices in the same space as the remote control of this
product can cause the other display devices to be inadvertently controlled.
Remote sensor
19
――If you press the
button on the panel key (P.19) when the product is turned
on, the control menu will be displayed.
Buttons
Description
Select the connected input source.
Control menu
Source
Move the panel key right to select Source
in the control menu. When the list
of input sources is displayed, move the panel key up or down to select the desired
input source. Next, press the panel key.
Display the OSD menu.
CONTENT
MENU
CONTENT
Contents Home
Move the panel key left to select menu
in the control menu. The OSD control
screen will appear. Move the panel key right to select the desired menu. You can
select a sub-menu item by moving the panel key up, down, left, or right. To change
settings, select the desired menu and press the panel key.
Enter Contents Home mode.
Move the panel key up to select Contents Home
CONTENT
in the control menu.
Power off the product.
Return
Power off
Move the panel key down to select Power off
the panel key.
Return
Exit the control menu.
in the control menu. Next, press
20
Reverse Side
Port
――The colour and shape of parts may differ from what is shown. Specifications are
RS232C IN
subject to change without notice to improve quality.
Description
Connects to MDC using an RS232C-stereo adapter.
RS232C OUT
RS232C IN
IR / AMBIENT SENSOR IN
Supplies power to the external sensor board or receives the light sensor signal.
AUDIO OUT
Connects to the audio of a source device.
RGB / DVI / HDMI / AV / COMPONENT /
AUDIO IN
Receives sound from a PC via an audio cable.
USB
Connect to a USB memory device.
DP IN
Connects to a PC using a DP cable.
HDMI IN 1, HDMI IN 2
Connects to a source device using an HDMI cable.
DVI IN / MAGICINFO IN
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
DP OUT
Connects to another product using a DP cable.
RGB IN
Connects to a source device using a D-SUB cable.
AV IN / COMPONENT IN
Connects to a source device using the AV/Component adapter.
IR OUT
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
RJ45
Connects to MDC using a LAN cable.
RS232C OUT
IR /
AMBIENT
SENSOR IN
AUDIO
OUT
RGB / DVI /
HDMI / AV /
COMPONENT
/ AUDIO IN
USB
HDMI IN 2
DP IN
HDMI IN 1
DVI IN /
MAGICINFO IN
DP OUT
RGB IN
IR
COMPONENT IN OUT
RJ45
21
Assembling the Holder-Wire stand
22
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
――A button without a description in the image below is not supported on the product.
OFF
Power on the product.
.QZ
ABC
DEF
GHI
JKL
MNO
PRS
TUV
WXY
DEL-/--
SYMBOL
MUTE
1
4
7
Adjust the volume.
Change the input source.
MagicInfo Lite, MagicInfo Premium S,
MagicInfo Videowall S Launch Button.
The buttons can vary according to the
Play Mode settings.
2
5
8
0
3
6
MagicInfo
Lite/S
SOURCE
Number buttons
Enter the password in the OSD menu.
-- Remote control button functions may
differ for different products.
9
CONTENT
(HOME)
VOL
Power off the product.
Mute the sound.
Unmuting the sound: Press MUTE again or press
the volume control(+ VOL -) button.
Contents Home Launch Button.
CH
MENU
BLANK
Temporarily turn off the video and mute the
audio.
Disabling the BLANK function
- Press BLANK one more time.
- Press SOURCE.
- Turn the product off and then on again.
Display or hide the onscreen display menu, or
return to the previous menu.
23
Quickly select frequently used functions.
TOOLS
INFO
Display information about the current input
source.
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
MagicInfo Quick Launch Button.
This button is disabled for products
that do not support MagicInfo.
MagicInfo can only be enabled
when a network box is connected.
RETURN
EXIT
PC
DVI
HDMI
DP
A
B
C
D
MagicInfo
3D
LOCK
Exit the current menu.
Manually select a connected input source from
PC, DVI, HDMI, or DisplayPort.
It sets safe lock function.
Use these buttons in Videos, Photos, Music and
Anynet+ modes.
-- Remote control button functions may
differ for different products.
To place batteries in the remote control
24
Adjusting the OSD with the Remote Control
Description
1
Open the OSD menu.
2
Select from Picture, Sound, Network, System or
Support in the displayed OSD menu screen.
7m ~ 10m
Buttons
Remote Control Reception Range
3
4
30˚
30˚
Change settings as desired.
Finish setting.
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the
left and right.
――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time.
――Remove batteries when the remote control is not to be used for an extended period of time.
5
Close the onscreen display (OSD) menu.
25
Connection Using an IR Stereo Cable
(sold separately)
1
2
Turn off the device before connecting the External Sensor Kit. After it is connected,
turn on the device.
Controlling more than one display product using
your remote control
IR OUT
IR/AMBIENT
SENSOR IN
•• Connect the IR OUT port on the product to the IR / AMBIENT SENSOR IN
port on the other display product using the dedicated stereo cable.
•• A command sent from the remote control pointed at product
received by both display products 1 and 2 .
――The appearance may differ depending on the product.
1 will be
Controlling more than one display product using an
external sensor kit (sold separately)
1
•• A command sent from the remote control pointed at product 1 (to
which the external sensor kit is connected) will be received by both display
products 1 and 2 .
――The appearance may differ depending on the product.
IR/AMBIENT
SENSOR IN
IR OUT
2
IR/AMBIENT
SENSOR IN
POWER
SOURCE
26
Before Installing the Product
(Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•• Ensure that an authorized installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
Tilting Angle and Rotation
15 ˚
――Contact Samsung Customer Service Centre for further details.
•• The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
•• To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
A
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface
for ventilation and ensure that the ambient A temperature is kept below 35 C.
B
Figure 1.1 Side view
27
Installation on an Indented Wall
Figure 1.3 Side view
――Contact Samsung Customer Service Centre for further details.
B
D
D
Plane view
A Minimum 40 mm
B Minimum 70 mm
A
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 C
――When installing the product on an indented wall, allow at least the space specified above between the product and wall for
ventilation and ensure that the ambient temperature is kept below 35 C.
C
E
Figure 1.2 Side view
Dimensions
Unit: mm (inches)
Model name
5
1
MD65C
1
1467.4 (57.8)
1 2
1431.4 (56.3)
23
806.5 (31.7)
34
45
848.0 (33.4)
56.2 (2.2)
――All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.
2
4
3
28
Installing the Wall Mount
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring(1).
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
1
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
wall mount on your own.
29
Wall Mount Kit Specifications (VESA)
――Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please contact
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe
personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•• Do not mount the product at more than a 15 degree tilt.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name
MD65C
VESA screw hole
specs (A * B) in
millimeters
400 × 400 (15.7 × 15.7)
Standard Screw
M8
Quantity
4
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
30
Remote Control (RS232C)
•• Pin assignment
1 2 3 4 5
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
6 7 8 9
Pin
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
31
LAN Cable
•• RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
9
•• Pin assignment
3
2
1
5
1 2 3 4 5 6 7 8
-P2-
6
-P1-
1
-P1Female
-P1-
-P2-
-P2-
Rx
2
-------->
3
Tx
STEREO
Tx
3
<--------
2
Rx
PLUG
Gnd
5
----------
5
Gnd
(3.5ø)
Pin No
Standard Colour
Signal
1
White and orange
TX+
2
Orange
TX-
3
White and green
RX+
4
Blue
NC
5
White and blue
NC
6
Green
RX-
7
White and brown
NC
8
Brown
NC
32
Cross LAN cable (PC to PC)
•• Connector : RJ45
Direct LAN cable (PC to HUB)
HUB
P1
P2
Signal
P1
P2
Signal
TX+
1
<-------->
3
RX+
RJ45
P2
RJ45
P1
P1
P2
RJ45 MDC
P2
Signal
TX-
2
<-------->
6
RX-
<-------->
1
TX+
RX+
3
<-------->
1
TX+
2
<-------->
2
TX-
RX-
6
<-------->
2
TX-
RX+
3
<-------->
3
RX+
RX-
6
<-------->
6
RX-
Signal
P1
TX+
1
TX-
33
Connection
•• Connection 2
•• Connection 1
RJ45
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
RJ45
OUT
•• Connection 3
RJ45
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
34
No.
Control Codes
Viewing control state (Get control command)
Header
Command
0xAA
Command type
ID
Data length
Command
0xAA
Command type
Command type
10
Video Wall On
0x84
0~1
11
Video Wall User Control
0x89
-
E.g. Power On & ID=0
Data length
Data
1
Value
Checksum
Command
No.
Value range
•• All communications take place in hexadecimals. The checksum is calculated by adding up all
values except the header. If a checksum adds up to be more than 2 digits as shown below
(11+FF+01+01=112), the first digit is removed.
0
ID
Command
Checksum
Controlling (Set control command)
Header
Command type
Command
Value range
1
Power control
0x11
0~1
2
Volume control
0x12
0~100
3
Input source control
0x14
-
4
Screen mode control
0x18
-
5
Screen size control
0x19
0~255
6
PIP on/off control
0x3C
0~1
7
Auto adjustment control (PC and
BNC only)
0x3D
0
8
Video wall mode control
0x5C
0~1
9
Safety Lock
0x5D
0~1
Header
Command
0xAA
0x11
Header
Command
0xAA
0x11
ID
ID
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
Checksum
12
•• To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as
"0xFE" and transmit commands. Commands will be executed by each device but ACK will not
respond.
35
Power control
Volume control
•• Function
A product can be powered on and off using a PC.
•• Function
The volume of a product can be adjusted using a PC.
•• Viewing power state (Get Power ON / OFF Status)
•• Viewing volume state (Get Volume Status)
Header
Command
0xAA
0x11
ID
Data length
Checksum
0
•• Setting power ON/Off (Set Power ON / OFF)
Header
Command
0xAA
0x11
ID
Header
Command
0xAA
0x12
Data length
Data
1
"Power"
Checksum
Header
Command
0xAA
0x12
•• Ack
0: Power OFF
Header
Command
0xAA
0xFF
•• Ack
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x11
"Power"
Checksum
0xAA
0xFF
ID
ID
Data length
Data
1
"Volume"
Checksum
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x11
"ERR"
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x12
"Volume"
Checksum
•• Nak
•• Nak
Command
0
"Volume": Volume value code to be set on a product. (0-100)
"Power": Power code to be set on a product.
Header
Checksum
"Volume": Volume value code to be set on a product. (0-100)
1: Power ON
Command
Data length
•• Setting the volume (Set Volume)
"Power": Power code to be set on a product.
Header
ID
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x12
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
"ERR" : A code showing what error has occurred.
36
Input source control
0x24
HDMI2_PC
•• Function
The input source of a product can be changed using a PC.
0x25
DisplayPort
――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to
•• Viewing input source state (Get Input Source Status)
Header
Command
0xAA
0x14
ID
Data length
"Get" commands.
――This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
Checksum
――MagicInfo is only available with models that contain the MagicInfo function.
0
――RF(TV), DTV are only available with models that include a TV.
•• Setting the input source (Set Input Source)
Header
Command
0xAA
0x14
ID
•• Ack
Data length
Data
1
"Input Source"
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x14
"Input
Source"
"Input Source": An input source code to be set on a product.
0x14
PC
0x18
DVI
0x0C
Input source
0x08
Component
0x20
MagicInfo
0x1F
DVI_video
0x30
RF(TV)
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
Checksum
"Input Source": An input source code to be set on a product.
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x14
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
37
Screen mode control
•• Nak
•• Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
――This control can only be used on models that include a TV.
Command
0xAA
0x18
ID
Data length
0xAA
ID
0x18
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
Ack/Nak
r-CMD
Val1
3
'N'
0x18
"ERR"
Checksum
•• Viewing the screen size (Get Screen Size Status)
Data
length
Data
Checksum
1
"Screen Mode"
Header
Command
0xAA
0x19
ID
Data length
Checksum
0
•• Ack
"Screen Mode": A code that sets the product status
0x01
0xFF
Data length
•• Function
The screen size of a product can be changed using a PC.
0
Command
0xAA
ID
Screen size control
Checksum
•• Setting the picture size (Set Picture Size)
Header
Command
"ERR": A code showing what error has occurred
•• Viewing screen status (Get Screen Mode Status)
Header
Header
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x19
"Screen Size"
Checksum
"Screen Size": product screen size (range: 0 – 255, unit: inch)
•• Nak
Header
Command
0xAA
0xFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x18
"Screen
Mode"
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x19
"ERR"
Checksum
"ERR": A code showing what error has occurred
"Screen Mode": A code that sets the product status
38
PIP On/Off control
Auto adjustment control (PC and BNC only)
•• Function
The PIP mode of a product can be turned on or off using a PC.
•• Function
Automatically adjust the PC system screen using a PC.
――Only available on models that have the PIP function.
――The mode cannot be controlled if Video Wall is set to On.
•• Viewing auto adjustment state (Get Auto Adjustment Status)
None
――This function is not available in MagicInfo.
•• Setting auto adjustment (Set Auto Adjustment)
•• Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header
Command
0xAA
0x3C
ID
Data length
Checksum
Command
0xAA
0x3C
Command
0xAA
0x3D
ID
Data length
Data
1
"Auto
Adjustment"
0
ID
Checksum
"Auto Adjustment" : 0x00 (at all times)
•• Setting PIP on/off (Set the PIP ON / OFF)
Header
Header
Data length
Data
1
"PIP"
•• Ack
Checksum
"PIP": A code used to turn the PIP mode of a product on or off
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"Auto
Adjustment"
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"ERR"
1: PIP ON
0: PIP OFF
Checksum
•• Nak
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
Header
Command
0xAA
0xFF
ID
Checksum
"ERR": A code showing what error has occurred
"PIP": A code used to turn the PIP mode of a product on or off
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
"ERR": A code showing what error has occurred
39
Video Wall Mode Control
Safety Lock
•• Function
Video Wall mode can be activated on a product using a PC.
•• Function
PC can be used to turn the Safety Lock function on or off on a product.
This control is only available on a product whose Video Wall is enabled.
This control is available regardless of whether or not the power is turned on.
•• Viewing video wall mode (Get Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Data length
•• Viewing the safety lock state (Get Safety Lock Status)
Checksum
0
•• Setting the video wall (Set Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Header
Command
0xAA
0x5D
ID
Data length
Checksum
0
•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Data length
Data
Checksum
1
"Video Wall Mode"
Header
Command
0xAA
0x5D
ID
Data length
Data
1
"Safety Lock"
"Video Wall Mode": A code used to activate Video Wall mode on a product
"Safety Lock": Safety lock code to be set on a product
1: Full
1: ON
0: Natural
0: OFF
Checksum
•• Ack
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"Video Wall
Mode"
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5D
"Safety Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
"Video Wall Mode": A code used to activate Video Wall mode on a product
•• Nak
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"ERR"
Header
Command
0xAA
0xFF
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x5D
"ERR"
Checksum
"ERR": A code showing what error has occurred
"ERR": A code showing what error has occurred
40
Video Wall On
•• Nak
•• Function
Turn Video Wall on or off on the product from your computer.
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x84
ERR
Checksum
•• Get Video Wall On/Off Status
Header
Command
0xAA
0x84
ID
Data length
"ERR": A code showing what error has occurred
Checksum
Video Wall User Control
0
•• Function
Turn the Video Wall function on or off on the product from your computer.
•• Set Video Wall On/Off
Header
Command
0xAA
0x84
ID
Data length
Data
Checksum
1
V.Wall_On
•• Get Video Wall Status
•• V.Wall_On: Video Wall code to be assigned to the product
1: Video Wall ON
•• Ack
Command
0xAA
0xFF
Command
0xAA
0x89
ID
Data length
Checksum
0
•• Set Video Wall
0: Video Wall OFF
Header
Header
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x84
V.Wall_
On
Checksum
Header
Command
0xAA
0x89
ID
Data length
Val1
Val2
2
Wall_Div
Wall_SNo
Checksum
Wall_Div: Video Wall Divider code assigned to the product
V.Wall_On : Same as above
41
10x10 Video Wall Model
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Off
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
2
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
3
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A
0x3B
0x3C
0x3D
0x3E
0x3F
4
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A
0x4B
0x4C
0x4D
0x4E
0x4F
5
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
0x5C
0x5D
0x5E
0x5F
6
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D
0x6E
0x6F
7
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
N/A
8
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A
0x8B
0x8C
N/A
N/A
N/A
9
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
N/A
N/A
N/A
N/A
10
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
N/A
N/A
N/A
N/A
N/A
11
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8
0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1
0xD2
0xD3
0xD4
0xD5
0xD6
0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
42
Wall_SNo: Product Number code assigned to the product
10x10 Video Wall Model : ( 1 ~ 100)
Set Number
Data
1
0x01
2
0x02
...
...
99
0x63
100
0x64
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
Val2
4
'A'
0x89
Wall_Div
Wall_SNo
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x89
ERR
Checksum
•• Nak
Header
Command
0xAA
0xFF
ID
Checksum
"ERR": A code showing what error has occurred
43
Chapter 03
Connecting and Using a Source Device
Before Connecting
Check the following before you connect this product with other devices. Devices that can be connected to this product
include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players.
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to
device.
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
――Connect the sound ports correctly: left = white and right = red.
――Check the types of ports at the back of the product you want to connect.
44
Connecting to a PC
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Connection using the D-SUB cable
(Analogue type)
RGB IN
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
45
Connection using a DVI cable (Digital type)
DVI IN /
MAGICINFO IN
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
Connection Using an HDMI-DVI Cable
――When you connect a PC to the product using an HDMI-DVI cable, set Edit
Name to DVI PC to access video and audio content stored on the PC.
HDMI IN 1, HDMI IN 2
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
46
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
Connection Using an DP Cable
•• Precautions for using DP
――To increase the standby power capacity, the product stops DP
communication when it is turned off or in power-saving mode. If the
product in dual monitor mode is turned off or goes into power-saving
mode, monitor setting changes may not be updated. As a result, screen
output may not be displayed properly. In the occurrence of this issue, set
Max. Power Saving to Off before using the product.
DP IN
――Some graphics cards that are not compliant with the DP standard may
prevent the Windows Booting/Bios screen from being displayed when the
product is in power-saving mode. If this is the case, make sure to turn on
the product first before turning on your PC.
47
Changing the Resolution
――Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
――The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
Display
Settings, and change the resolution.
Changing the Resolution on Windows Vista
Go to Control Panel
Personal Settings
Display Settings, and change the resolution.
48
Changing the Resolution on Windows 7
Go to Control Panel
Display
Screen Resolution, and change the resolution.
Changing the Resolution on Windows 8
Go to Settings
Control Panel
Display
Screen Resolution, and change the resolution.
49
Connecting an External Monitor
――Connecting parts may differ in different products.
DP OUT
DP IN
50
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
AV IN / COMPONENT IN
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
51
Connection Using the component Cable
AV IN / COMPONENT IN
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
Connection Using an HDMI-DVI Cable
――Audio will not be enabled if the product is connected to a video device using
an HDMI-DVI cable. To resolve this, additionally connect an audio cable to
the audio ports on the product and video device. When you connect a video
device to the product using an HDMI-DVI cable, set Edit Name to DVI Devices
to access video and audio content stored on the video device.
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and
576p.
HDMI IN 1, HDMI IN 2
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
52
Connection Using an HDMI Cable
Using an HDMI cable or HDMI to DVI Cable (up to
1080p)
•• For better picture and audio quality, connect to a digital device using an
HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not
require an audio cable.
-- To connect the product to a digital device that does not support HDMI
output, use an HDMI-DVI and audio cables.
HDMI IN 1, HDMI IN 2
•• The picture may not display normally (if at all) or the audio may not work if
an external device that uses an older version of HDMI mode is connected to
the product. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
53
Connecting to an Audio System
――Connecting parts may differ in different products.
AUDIO OUT
54
Connecting the network box (Sold separately)
――For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
――To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
――For details on how to use MagicInfo, refer to the DVD provided with the network box.
――The information in this section is subject to change without notice for quality improvement.
――If a problem occurs after installing an operating system other than the one provided with the network box, restoring the previous version of the operating system, or
installing software that is not compatible with the operating system provided, you will not be able to benefit from technical support and will be charged a fee for a visit
from a service technician. A product exchange or refund will also not be available.
Entering MagicInfo mode
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
1
After installing and connecting the network box (sold separately) to the product, power on the product.
2
Press SOURCE on the remote control, and select MagicInfo.
――Connecting the network box to the DVI IN / MAGICINFO IN port on the product will change Source from DVI to
MagicInfo-i Premium (Web-based version)
3
Select Later
< Back(B)
Next(N) >
MagicInfo.
Finish
Select the default application you want to run when MagicInfo starts.
Cancel
55
MagicInfo Setup Wizard - v.1.12
4
Enter the IP information.
5
Select a language. (The default language is English.)
Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
IP address:
192 . 168 . 0 . 102
Subnet mask:
255 . 255 . 255 . 0
Default gateway:
192 . 168 . 0 . 1
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
10 . 44 . 33 . 22
Alternate DNS server:
10 . 33 . 22 . 11
< Back(B)
Next(N) >
Finish
Cancel
MagicInfo Setup Wizard - v.1.12
Select Language -step 3
Select the language you want to install on the system for menus and
dialogs.
Current Language
:
Engilsh
Chinese [Traditional]
German
English
French
Italian
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B)
Next(N) >
Finish
Cancel
56
MagicInfo Setup Wizard - v.1.12
6
Select a display mode.
7
Double-check the settings you have just configured.
Select Screen Type - step 4
Landscape
Portrait
< Back(B)
Next(N) >
Finish
Cancel
MagicInfo Setup Wizard - v.1.12
――If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom
Setup Information
1. Application :
right of the screen.
MagicInfo Pro [LAN,WAN based version\
2. Internet Protocol [TCP/IP]
IP :
192.168.0.102
3. Language :
4. Screen Type :
English
Landscape
Do not show again
< Back(B)
Apply
Finish
Cancel
57
Plug In Module
To use Plug In Module, make sure you connect a Samsung PIM (sold separately).
To connect a device made by another manufacturer, ensure the device is compatible with Open Pluggable Specification (OPS) standards.
――For details on how to connect a device, refer to the user manual provided with the PIM upon purchase.
――For details on how to use MagicInfo provided in PIM, refer to page 55.
――To obtain optimum audio quality, configure the HDMI audio settings using the Windows Control Panel on the OPS device. For products made by other manufacturers,
this only applies to HDMI-compatible devices.
――To enable sound output from the product with an OPS device that does not support HDMI, configure the analogue audio settings using the Windows Control Panel, go
to Plug In Module > Edit Name and set the input source to PC, DVI PC or DVI.
58
Changing the Input source
Source allows you to select a variety of sources and change source device names.
Source
――The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.
――The input source can also be changed by using the SOURCE button on the remote control.
MENU m → Support → Contents Home → Source → ENTER E
Source
HDMI1
PC
HDMI2
PC
DisplayPort
---
PC
---
DVI
---
With WiDi display technology, you can pair the product with your laptop computer wirelessly. This technology is based on the
wireless LAN N series that is designed to transfer a high-quality signal of 720p or 1080p between wireless devices.
This is useful especially if you want to connect your desktop or laptop computer to a bigger screen such as a product.
•• To implement the WiDi feature, your laptop computer must meet the requirements below.
(For compatibility with your laptop computer, contact the manufacturer of your laptop computer.)
System Requirements
Intel® WiDi
AV
---
Component
-- The displayed image may differ depending on the model.
•• Processor: Intel Core i3 Series
--Tools
What is Intel® WiDi?
Return
•• Graphics: Intel HD Graphics
•• Wireless adapter
-- Intel® Centrino® Wireless-N 1000, 1030
-- Intel® Centrino® Advanced-N 6200, or 6230, 6205
-- Intel® Centrino® Wireless-N + WiMAX 6150
-- Intel® Centrino® Advanced-N + WiMAX 6250
-- Intel® Centrino® Ultimate-N 6300
•• Software: Intel® My WiFi Technology (Intel® MWT) 2, Intel® Wireless Display are required to install
•• Operating system: Windows 7 32 bit, 64 bit
59
WiDi Connection
1
From the Source screen, select Intel® WiDi.
2
On your desktop, launch Intel® WiDi (
).
――As soon as the programme starts, it searches for available adapters.
3
Select the correct adapter for the programme and press "Connect".
――If the adapter of your choice is not found, press "Search for available adapters".
――If the search result has more than 2 match, check the product ID that you want to connect to.
4
Enter the security code into the WiDi programme on your laptop computer. Note that the security code will only be
displayed on the screen when first run.
5
A connection has been established with your laptop computer. Now you can use the WiDi feature to transfer data
wirelessly.
Usage Conditions
•• Frequency: 2.4G / 5G
•• Effective Range: 0.5m ~ 3m (max. 10m) - required to minimize the electric interference
•• Operation: Since the WiDi technology uses a compression codec system for communications purposes, you may
encounter a delay in the transmission or a corrupt image on the screen. Therefore, it is advisable to use a wired port
(HDMI or PC port, if any) to guarantee a stable, optimal performance.
60
Chapter 04
Using MDC
Configuring Settings for Multi Control
Wake On LAN(WOL):
This feature allows you to power on the
product by sending a pre-determined
command from an external system to the
product over a network.
Make sure the network is capable of data
communication with the PC that sends
the command to the product. Ensure you
have a programme that can generate
Wake on LAN signals.
MENUm→ System → Multi Control → ENTERE
Assign an individual ID to your product.
Configuring settings for Multi Control
•• ID Setup
Assign an ID to a set. (Range: 0~99)
Press ▲/▼ to select a number, and press E.
•• ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
•• MDC Connection
Select a method to connect to MDC to receive the MDC signal.
-- RS232C MDC
Communicates with the MDC via a RS232C MDC cable.
-- RJ45 MDC
Communicates with the MDC via an RJ45 MDC cable.
――If MDC Connection is set to RJ45 MDC and the product is powered off, only the WOL function will be enabled. MDC communication will not be available.
――The WOL function is enabled only when MDC Connection is set to RJ45 MDC.
61
•• DisplayPort daisy chain
To display the DP IN video input through the DP OUT output port, select a device connection method from Single Stream Transport (SST) and Multi Stream Transport
(MST).
Clone: In this Single Stream Transport (SST) output mode, the same screen output is displayed on two display devices connected.
――If Clone is selected, the PC recognizes the two displays as a single monitor.
――Clone mode is enabled if the input source is a digital input other than DisplayPort, such as DVI, HDMI1, HDMI2, or MagicInfo.
Expand: In this Multi Stream Transport (MST) mode, a different screen output is displayed on two display devices connected.
――If Expand is selected, the PC recognizes the two displays as separate monitors.
――The mode functions only on a PC that supports DisplayPort 1.2 MST.
――For Full HD resolution (1920x1080) displays, a maximum of four displays can be connected.
62
MDC Programme Installation/Uninstallation
Installation
MDC installation can be affected by the
graphics card, mother board and network
conditions.
If a software installation window is not
displayed on the main screen, install with
the MDC Unified execution file in the
MDC folder on the CD.
If the directory path is not specified, the
programme will be installed in the default
directory path.
Select "Launch MDC Unified" and click
"Finish" to run the MDC programme
immediately.
1
Insert the installation CD into the CD-ROM drive.
2
Click the MDC Unified installation programme.
3
Select a language for installation. Next, click "OK".
4
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
5
In the "License Agreement" window displayed, select "I accept the terms in the license agreement" and click "Next".
6
In the displayed "Customer Information" window, fill out all the information fields and click "Next".
7
In the displayed "Destination Folder" window, select the directory path you want to install the programme in and click "Next".
8
In the displayed "Ready to Install the Program" window, check the directory path to install the programme in and click "Install".
9
Installation progress will be displayed.
10Click "Finish" in the displayed "InstallShield Wizard Complete" window.
11The MDC Unified shortcut icon will be created on the desktop after installation.
-- The MDC execution icon may not be
displayed depending on the PC system
or product specifications.
-- Press F5 if the execution icon is not
displayed.
Uninstallation
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
63
What is MDC?
Multiple display control "MDC" is an
application that allows you to easily
control multiple display devices
simultaneously using a PC.
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Monitor 1
RS232C IN / OUT
Monitor 2
Computer
64
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable.
Connection using a direct LAN cable
――Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
Monitor 1
RJ45
HUB
Monitor 2
Computer
65
Connection using a cross LAN cable
――Multiple products can be connected using the RS232C IN / OUT port on the product.
Monitor 1
RJ45
RS232C OUT
Monitor 2
Computer
66
Connection Management
Connection management includes the Connection list and Connection list modification options.
Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MAC, and Connection Type), connection status, Set ID
Range, and detected devices.
Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. All the LFDs detected in a connection are displayed in the Device list,
where the user can make groups and send commands to detected devices.
Connection list modification options - Connection modification options includes Add, Edit, Delete, and Refresh.
67
User Login
Launching the programme displays the user login window.
The initial login ID (password: admin) and password (Auto Login: admin) are set to admin.
――After logging in for the first time, make sure to change the password to ensure security.
――To change the password, go to Home > User Settings.
After you are logged in, [User Login : admin] appears at the right bottom of the programme.
To log in automatically when the programme restarts, select the Auto Login checkbox in the User Login window.
68
Auto Set ID
Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection.
There can be a maximum of 100 LFDs in a connection.
The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0.
――ID for the last 100th LFD is set to 0.
69
Cloning
Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs.
You can select specific tab categories or all tab categories for cloning, using the copy setting option window.
――To delete the settings you have configured, click the Paste Settings button.
70
Command Retry
This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD.
The retry count value can be set using the MDC options window.
The retry count value must be between 1-10. The default value is 1.
71
Getting Started with MDC
1
To start the programme, click Start → Programs → Samsung → MDC Unified.
The login window appears after the MDC programme is launched.
Enter the user ID and password.
•• The default user ID and password are admin.
•• Make sure to change the password after the first login.
2
Click Add to add a display device.
SET ID Range: Select a range of the unique ID assigned to a monitor.
-- If the connection is established via RS232C, go to Serial and specify the COM Port.
-- If the connection is established via Ethernet, enter the IP that was entered for the display device.
72
Main Screen Layout
1
6
1 Menu Bar
Change the status of a display device or the properties of the programme.
2 Device Category
View a list of connected display devices or device groups.
3 Schedule Category
View a list of schedules for display devices.
4 Set List
Select the display device you want to adjust.
2
5 Modify the Set List
Add, edit, regroup or delete sets.
3
6 Help Topics
Display help topics for the programme.
5
4
Menus
You can power on or off a selected device or change the input source or volume of the device.
Home
Select an item and change the corresponding setting.
Choose display devices from the list of sets, and select the Home tab.
Power
•• On: Power on a selected display.
1
•• Off: Power off a selected display.
Input
2
3
•• Input Source : Change the input source.
-- Input sources available can vary depending on the Display Device Models.
-- The input source can be changed only for displays that are turned on.
•• Channel: Change the channel.
-- The TV channel can be changed by using the up/down arrow keys.
-- The channel can be changed only when the input source is TV.
-- Only registered channels can be selected.
-- Only applicable to models that support TVs.
73
――The volume can be changed or the sound can be muted only for displays that are turned on.
Volume
Volume
•• Adjust the volume of a selected display.
2
Alert
3
•• The volume can be adjusted using the slider bar in the range of 0 to 100.
Mute
•• Enable or disable Mute for a selected display.
Mute will automatically be disabled if Volume is adjusted when Mute is on.
Fault Device
•• This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor
error, or lamp error.
•• Select a display device from the list. The Repair button will be enabled.
3
•• Click the Refresh button to refresh the error status of the display device. The recovered display device will disappear from
the Fault Device List.
Fault Device Alert
•• Display device in which error is detected will be reported by email.
•• Fill in all required fields. The Test and OK buttons will be enabled.
Ensure the Sender information and at least one Recipient are entered.
74
User Login
User Settings
•• Add, delete or edit login information.
Logout
•• Log out from the current user account as follows.
•• Click Logout. The message "Do you want to log admin out?" is displayed
•• Click Yes. The user login window appears.
•• If you do not want to log in, click Close. The programme is closed.
――If you close the programme using Logout, the login window will appear prompting you to enter user information even
if the Auto Login checkbox is selected.
Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted.
Custom
Select an item and change the corresponding screen setting.
Choose display devices from the list of sets, and select the Picture tab.
Picture Mode
•• Adjust the picture mode for the selected display device.
Contrast
•• Adjust the contrast for the selected display device.
Brightness
•• Adjust the brightness for the selected display device.
75
Color
Color
•• Adjust the colours for the selected display device.
Tint (G/R)
•• Adjust the tint for the selected display device.
Color Tone
•• Adjust the background colour tone for the selected display device.
Color Temp.
-- Color and Tint (G/R) are not available if the input source is PC.
-- Color, Tint (G/R), Color Tone and Color Temp. are not available if both PC Source and Video
Source are selected.
Options
•• Adjust the colour temperature for the selected display device.
――This option is enabled if Color Tone is set to Off.
HDMI Black Level
•• Adjust the HDMI Black Level for the selected display device.
Auto Motion Plus
This option is used to view dynamic images.
•• Off: Disable the Auto Motion Plus function.
•• Clear: Set the level of Auto Motion Plus to clear. This mode is suitable to display vivid images.
•• Standard: Set the level of Auto Motion Plus to standard.
•• Smooth: Set the level of Auto Motion Plus to smooth. This mode is suitable to display smooth images.
•• Custom: Customize the level of screen burn-in or flickering.
•• Demo: This function demonstrates the technology of Auto Motion Plus. The result when the mode is changed can be
previewed on the left side of the window.
――Auto Motion Plus may not be available depending on the product.
•• Detail: View detailed information about the selected display device.
Brightness Sensor
•• Enable or disable the Brightness Sensor for the selected display device.
•• The Brightness Sensor detects the ambient light intensity and automatically adjusts the screen brightness.
――Brightness Sensor may not be available depending on the product.
76
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•• Off / Low / Medium / High / Auto
Smart LED
Controls the LED backlight to maximize picture clarity.
Cinema Black
In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing
experience.
•• Off: Turns off the Cinema Black feature.
•• On: Adjusts the dimming of the top and bottom areas of the screen according to the video.
Size
Picture Size
•• Adjust the screen size for the selected display device.
•• The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configuration.
•• The -/+ buttons can be used to adjust Zoom.
•• The screen can be relocated using the up/down/left/right buttons.
Detail
•• You can view details of the selected screen size.
PC Screen Adjustment
•• Frequency adjustment or fine-tuning is available by using the -/+ buttons in Coarse or Fine.
•• To relocate the screen, click one of the four images below Position.
•• To automatically adjust the frequency, fine-tune or relocate the screen, click Auto Adjustment.
77
Advanced features
3D Mode
Select the 3D input format.
3D L/R Change
Swap the left and right pictures.
3D → 2D
Displays the image for the left eye only.
3D Auto View
3D Control
If you set 3D Auto View to Message Notice, a pop up message window appears when the product receives a 3D signal.
3D Optimization
The overall adjustment of 3D effect.
3D Expert Pattern
View a 3D pattern.
3D Effect
Adjust 3D effects like perspective and depth for your preferred 3D viewing experience.
•• Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input source.
•• Manual: Manually adjust the perspective and depth settings.
78
Advanced Settings
Dynamic Contrast
Adjust the screen contrast.
Gamma Control
Adjust the primary colour intensity.
RGB Only Mode
Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation.
Flesh Tone
Emphasize pink “Flesh Tone.”
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
LED Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
Color Space
Adjusts the range and variety of colour (the colour space) available to create images.
•• Auto / Native / Custom
-- To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
White Balance
Adjust the colour temperature for a more natural picture.
•• R-Offset / G-Offset / B-Offset
Adjust each colour (red, green, blue) darkness.
•• R-Gain / G-Gain / B-Gain
Adjust each colour (red, green, blue) brightness.
•• Reset
Resets the White Balance to it’s default settings.
79
Sound Adjustment
You can change the sound settings.
Choose display devices from the list of sets, and select the Sound tab.
Bass
•• Adjust the bass for the selected display.
Treble
•• Adjust the treble for the selected display.
-- The Bass or Treble item will be disabled if the item is not supported by the selected set.
Balance(L/R)
•• Adjust the volume of the left and right speakers of the selected display device.
SRS TS XT
•• Enable or disable the SRS TS XT effect for the selected display device.
System Setup
Video Wall
Choose display devices from the list of sets, and select the System tab.
The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected
multiple display devices.
――Video Wall is enabled only when devices are in the group.
Video Wall
•• Enable or disable Video Wall.
80
Format
H
•• Select the format to display the split screen.
•• Select the number of horizontal display devices.
•• A maximum of 15 displays can be arranged in a row.
――A maximum of 6 can be assigned to V if 15 is assigned to H.
V
•• Select the number of vertical display devices.
•• A maximum of 15 displays can be arranged in a row.
――A maximum of 6 can be assigned to H if 15 is assigned to V.
Screen Position
•• View the layout of displays (configured by the screen divider) or change the layout as required.
•• Screen Position and Preview are enabled when Video Wall is set to on.
•• Note that if multiple sets are selected, Preview is enabled only if the settings for H and V match the layout of the selected
sets.
Full
Natural
•• To change the Position, select a set and drag it to a new position.
――The range of screen divider settings may differ depending on the model.
PIP
PIP Size
•• View the PIP Size of the current display.
PIP Source
•• Select a PIP input source.
Sound Select
•• Select and enable the sound from either the primary screen or secondary screen.
Channel
-- Basic information required to adjust PIP will appear in the menu screen.
•• The channel can be changed if PIP Source is TV.
-- PIP will be disabled when Video Wall is On.
-- Note that Picture Size is disabled when PIP is On.
81
General
User Auto Color
•• Automatically adjust the screen colours.
――Available only in PC mode.
Auto Power
•• Set the product to automatically power on.
Standby Control
•• Set the standby mode to activate if an input source is not detected.
Fan & Temperature
Configure the settings required to detect the fan speed and internal temperature for the product's protection.
Fan Control
•• Select a method to configure the fan speed.
Fan Speed Setting
•• Configure the fan speed.
Temperature
•• Detect the internal temperature by specifying the range of temperature.
82
Security
Safety Lock
•• Lock the on-screen menus.
――To unlock the menus, set Safety Lock to Off.
Button Lock
•• Lock the buttons on the display device.
――To unlock the buttons, set Button Lock to Off.
OSD Display
Source OSD
•• Select whether to display a message when the Source is changed.
Not Optimum Mode OSD
•• Select whether to display a message when a non-compatible mode is selected.
No Signal OSD
•• Select whether to display a message when there is no input signal.
MDC OSD
•• Select whether to display a message when settings are changed by the MDC.
83
Time
Clock Set
Change the current time on the selected display device according to the time set on a PC.
If the time is not set on the display device, null values will be displayed.
Timer
On Timer
•• Repeat: Specify the period for which you want to repeat the selected Timer.
Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual
•• Holiday Apply: The Holiday Management settings can be applied to the Timer.
•• On Time: Set the time to power on the selected display device.
•• Volume: Specify the volume of the display device when it is powered on by On Time.
•• Source: Specify the input source of the display device when it is powered on by On Time.
Off Timer
•• Repeat: Specify the period for which you want to repeat the selected Timer.
Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual
•• Holiday Apply: The Holiday Management settings can be applied to the Timer.
•• Off Time: Set the time to power off the selected display device.
――The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
84
Holiday Management
Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a
specified date.
――The Holiday Management function can be enabled or disabled in the Timer settings menu.
•• Add: You can specify holidays.
Click the Add button in the Holiday Management window.
•• Delete: Delete holidays. check the corresponding checkboxes and click this button.
•• List of holidays: View a list of holidays you have added.
Screen Burn Protection
Pixel Shift
Move the screen slightly at specified time intervals to prevent screen burn-in.
85
Screen Saver
This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time.
Timer: You can set the timer for Screen Saver.
•• Off
•• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period).
•• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to
End Time).
•• Mode: Select a screen protective pattern to display.
•• Period (Hour): Specify the time interval to activate the Screen Saver function.
――The option is enabled when Repeat is selected for Timer.
•• Time (Sec): Specify the duration to keep the Screen Saver function on.
――The option is enabled when Repeat is selected for Timer.
•• Start Time: Set start time to display screen saver.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set end time to display screen saver.
――The option is enabled when Interval is selected for Timer.
――Period (Hour) and Time (Sec) can be configured when Repeat is
selected.
――Start Time and End Time can be configured when Interval is selected.
86
Safety Screen
The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display
device for an extended period of time.
Lamp Control
Lamp Control is used to adjust the backlight to reduce power consumption.
Automatically adjust the backlight of the selected display device at a specified time.
If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off.
Manually adjust the backlight for the selected display.
If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off.
•• Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen brightness of all the
LFDs in the same serial chain.
87
Ticker
Input text while a video or image is displayed and display the text on the screen.
Ticker
Enable or disable Ticker.
•• Off / On
Message
Enter a message to display on the screen.
Timer
Set the Start Time and End Time to display a message (Message).
Position
Select an orientation to display a message (Message) from Horizontal and Vertical.
Motion
Specify the Direction and Speed to display a message (Message).
Font Options
Specify the message Size, Foreground Color, Foreground Opacity, Background Color and Background Opacity.
88
Tool Settings
•• Panel Control: Turn on or off the screen of a display device.
•• Remote Control: Enable or disable the remote control.
Security
Reset
•• Reset Picture: Reset the screen settings.
•• Reset Sound: Reset the sound settings.
•• Reset System: Reset the system settings.
•• Reset All: Reset the screen, sound and system settings at the same time.
89
Edit Column
Options
Configure the settings for the items that will be displayed on the list of displays.
•• Language: Select a language to use in the MDC programme. After selecting a language, restart the MDC programme to
use the selected language.
•• Command Retry Count: Specify the number of retry attempts when a command fails.
•• Error Status Interval: Specify the time interval to query the display device in order to check if "Fault Device" has
occurred.
•• Mail Alert Interval: Specify the time interval for email notifications in the event when "Fault Device" occurs.
Edit Column
Select the items you want to display in the list of sets.
90
Monitor Window
A window appears showing details for data transfer between the computer and display devices.
•• Filter
Information
View the programme information.
91
Other Functions
Resizing a Window
Place the mouse pointer on a corner of the programme window. An arrow will appear.
Move the arrow to customize the size of the programme window.
92
Group Management
Create groups and manage the list of sets on a group basis.
――Duplicate group names cannot be used.
Creating Groups
1
Right-click and select Group
2
In the Edit Group window displayed, click Add on the same level or Add on the sub level.
Edit in the display device list section on the left side of the programme window.
•• Add on the same level: Create a group on the same level as the selected group.
-- The Add on the same level button is enabled only if at least one group is created.
93
•• Add on the sub level: Create a sub-group under the selected group.
Deleting Groups
3
Enter the group name.
1
Select a group name, and click Edit.
2
In the Edit Group window displayed, click Delete.
3
Click Yes. The group will be deleted.
94
Renaming Groups
1
Select a group name, and click Edit.
2
In the Edit Group window displayed, click Rename.
3
If a cursor appears in the old group name, enter a new group name.
Rename
Schedule Management
Creating Schedules
Create and register a schedule on a group basis.
1
Click All Schedule List in the schedule section on the left side of the programme window. The Add button will be
enabled in the middle.
95
2
Click the Add button. The Add Schedule window will appear.
3
Click Add below the Device Group item, and select the group you want to add a schedule to.
4
Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list
window.
-- Device Group: Select a group.
-- Date&Time
Instant Execution: Run the schedule immediately.
Timer: Set the date, time and interval to run the schedule.
-- Action: Select a function that will activate at the specified time and interval.
Schedule Modification
To modify a schedule, select the schedule and click Edit.
Deleting a Schedule
To delete a schedule, select the schedule and click Delete.
96
Troubleshooting Guide
-- This programme may malfunction
sometimes due to a communication
problem between the PC and display
or electromagnetic waves emitted from
nearby electronic devices.
Issue
The display you want to control does not
appear on the system information chart.
Solution
1
Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port).
2
Check that another display with a duplicate ID is not connected. Connecting displays with a duplicate ID can cause
the displays not to be shown due to data collision.
3
Check that the display ID is within the range of 0 and 99. (Change the ID using the Display menu.)
――For a display that supports the ID in a range of 0 to 99, the ID should be set between 0 and 99.
The display you want to control does not
appear on the other Control Info Grids.
Check that the display is powered on. (See the power status in the system information chart.)
The following message appears
repeatedly.
Check that the display you want to control is selected.
Displays power on or off at different
time from one another even though On
Time or Off Time is set.
Adjust the time on the PC to synchronize the time between the connected displays.
The remote control does not work.
The remote control may not work if the RS-232C cable is removed or the programme is closed abnormally while the
Remote Control function is Disable. To resolve this, run the programme again and set Remote Control to Enable.
Ensure you select the input source the display is connected to.
97
How display properties are shown when multiple displays are used
1
When no display is selected: The default value is displayed.
2
When one display is selected: Settings for the selected display are displayed.
3
When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3.
4
When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
98
Chapter 05
Screen Adjustment
Configure the Picture settings (Backlight, Colour Tone, etc.).
-- The layout of the Picture menu options may vary depending on the product.
Picture Mode
If the input source is PC, DVI or DisplayPort
•• Information: This mode reduces eye fatigue and is suitable for displaying information to the public.
MENUm → Picture → Picture Mode → ENTERE
•• Advertisement: This mode is suitable for displaying video content and indoor/outdoor advertisements.
Select a picture mode (Picture Mode) suitable for the environment where the
product will be used.
Different Picture Mode options are displayed depending on the current input
source.
•• Dynamic: This mode is suitable when the ambient light is bright.
•• Standard: This mode is generally suitable for any environment.
Picture
•• Natural: Suitable for reducing eye strain.
Picture Mode
Information
· Backlight
60
· Contrast
70
· Brightness
45
· Sharpness
50
· Colour
50
· Tint (G/R)
If the input source is AV, Component, HDMI1, HDMI2
G 50
•• Movie: This mode reduces eye fatigue.
R 50
-- The displayed image may differ depending on the model.
99
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
MENUm → Picture → ENTERE
Your product has several options for adjusting picture quality.
Input source
PC, DVI, DisplayPort, HDMI1 (when
a PC is connected), HDMI2 (when a
PC is connected)
Picture Mode
Information
Backlight / Contrast / Brightness /
Sharpness
Advertisement
Backlight / Contrast / Brightness /
Sharpness / Colour
Dynamic, Standard, Natural, Movie
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Picture
Picture Mode
Information
· Backlight
60
· Contrast
70
· Brightness
45
· Sharpness
50
· Colour
50
· Tint (G/R)
G 50
AV, Component, HDMI1, HDMI2
Adjustable options
――When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
――You can adjust and store settings for each external device you have connected to an input on the product.
――Lowering picture brightness reduces power consumption.
R 50
-- The displayed image may differ depending on the model.
100
Screen Adjustment
choose size and aspect ratio picture displayed on screen.
MENUm → Picture → Screen Adjustment → ENTERE
――Different Screen Adjustment options are displayed depending on the current input source.
•• 16:9: Sets the picture to 16:9 wide mode.
Screen Adjustment
Picture Size
Picture Size
•• Zoom1: Use for moderate magnification. Cuts off the top and sides.
Custom
•• Smart View 1: Reduces the 16:9 picture by 50%.
――Smart View 1 is enabled only in HDMI1, HDMI2 mode.
· Zoom/Position
· 4:3 Screen Size
16:9
PC Screen Adjustment
Resolution Select
-- The displayed image may differ depending on the model.
•• Zoom2: Use for a stronger magnification.
•• Smart View 2: Reduces the 16:9 picture by 25%.
――Smart View 2 is enabled only in HDMI1, HDMI2 mode.
•• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
Off
•• 4:3: Sets the picture to basic (4:3) mode.
――Do not set your product to 4:3 format for a long time.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn)
which is not covered by the warranty.
•• Screen Fit: Displays the full image without any cut-off when HDMI1, HDMI2 (720p / 1080i / 1080p) or Component (1080i
/ 1080p) signals are inputted.
•• Custom: Changes the resolution to suit the user's preferences.
•• Original ratio: If the input source is PC, DVI, HDMI1(PC connection), HDMI2 (PC connection), or DisplayPort, the video
will display in the original aspect ratio.
――Available ports may differ depending on the model.
101
Picture Sizes available by Input Source.
Input Source
Picture Size
AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3, Custom
Component (1080i, 1080p)
16:9, Wide Fit, Screen Fit, 4:3 , Custom
HDMI1, HDMI2 (720p, 1080i, 1080p)
16:9, Smart View 1, Smart View 2, Wide Fit, 4:3 , Screen Fit,
Custom
HDMI1, HDMI2 (480i, 480p)
16:9, Zoom1, Zoom2, Smart View 1, Smart View 2, 4:3,
Custom
PC, DVI, DisplayPort, HDMI1(when a PC is connected),
HDMI2 (when a PC is connected)
16:9, 4:3, Original ratio
102
Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or Custom.
――To use the Position function after selecting Zoom1, Zoom2, Wide Fit or Screen Fit, follow these steps.
Screen Adjustment
Picture Size
Zoom1
· Position
1
Press the ▼ button to select Position. Press the E button.
2
Press the ▲ or ▼ button to move the picture up or down.
3
Press the E button.
16:9
· 4:3 Screen Size
PC Screen Adjustment
Resolution Select
Off
-- The displayed image may differ depending on the model.
――To use the Zoom/Position function after selecting Screen Fit in HDMI1, HDMI2 (1080i/1080p) or Component
Zoom/Position
(1080i/1080p) or Custom, follow these steps.
Screen Adjustment
Picture Size
Custom
· Zoom/Position
· 4:3 Screen Size
16:9
PC Screen Adjustment
Resolution Select
1
Press the ▼ button to select Zoom/Position. Press the E button.
2
Select the Zoom or Position. Press the E button.
3
Press the ▲/▼/◄/► button to move the picture.
4
Press the E button.
――If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
Off
The picture will be set to its default position.
-- The displayed image may differ depending on the model.
103
4:3 Screen Size
Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen
Service) size or the original size. Each European country requires different picture size.
•• 16:9 / Wide Zoom / Zoom / 4:3
Screen Adjustment
Picture Size
Custom
· Zoom/Position
16:9
· 4:3 Screen Size
PC Screen Adjustment
Resolution Select
Off
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
PC Screen Adjustment
•• Coarse / Fine
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the Centre
of screen.
Screen Adjustment
Picture Size
Custom
· Zoom/Position
· 4:3 Screen Size
Press the ▲ or ▼ button to adjust the Vertical Position. Press the ◄ or ► button to adjust the Horizontal Position.
16:9
PC Screen Adjustment
Resolution Select
•• Position
To adjust the PC’s screen position if it is not Centreed or does not fit the product screen.
•• Image Reset
Resets the image to the default settings.
Off
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
104
Resolution Select
If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture
quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768
Screen Adjustment
Picture Size
Custom
· Zoom/Position
· 4:3 Screen Size
16:9
PC Screen Adjustment
Resolution Select
Off
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
MENUm → Picture → Auto Adjustment → ENTERE
Picture
Auto Adjustment
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
105
Rotation
Rotate the product screen orientation.
•• Landscape: Display the screen in landscape mode (default).
•• Portrait: Display the screen in portrait mode.
MENUm → Picture → Rotation → ENTERE
Picture
Rotation
· Aspect Ratio
Portrait
Full Screen
-- The displayed image may differ depending on the model.
Aspect Ratio
Set the rotated screen to be either full screen or original.
•• Full Screen: Display the rotated screen in full screen.
MENUm → Picture → Aspect Ratio → ENTERE
•• Original: Display the rotated screen in the original aspect ratio.
――Available only when Rotation is set to Portrait.
Picture
Rotation
· Aspect Ratio
Portrait
Full Screen
-- The displayed image may differ depending on the model.
106
Advanced Settings
Input Source
MENUm → Picture → Advanced Settings → ENTERE
Advanced Settings
Dynamic Contrast
Medium
Black Tone
Off
Flesh Tone
0
RGB Only Mode
Colour Space
Picture Mode
PC, DVI, DisplayPort, HDMI1
(when a PC is connected),
HDMI2 (when a PC is
connected)
Information
White Balance / Gamma
Advertisement
Dynamic Contrast / Black Tone / Flesh Tone / Colour Space
/ White Balance / Gamma
AV, Component, HDMI1,
HDMI2
Natural, Dynamic
Not available
AV
Standard
Dynamic Contrast / Black Tone / Flesh Tone / RGB Only
Mode / Colour Space / White Balance / Gamma / Motion
Lighting
Movie
Dynamic Contrast / Black Tone / Flesh Tone / RGB Only
Mode / Colour Space / White Balance / 10p White Balance /
Gamma
Standard
Dynamic Contrast / Black Tone / Flesh Tone / RGB Only
Mode / Colour Space / White Balance / Gamma / Expert
Pattern / Motion Lighting
Movie
Dynamic Contrast / Black Tone / Flesh Tone / RGB Only
Mode / Colour Space / White Balance / 10p White Balance /
Gamma / Expert Pattern
Off
Native
Component, HDMI1, HDMI2
White Balance
10p White Balance
Advanced Settings
Off
-- The displayed image may differ depending on the model.
107
Dynamic Contrast
Advanced Settings
Dynamic Contrast
Medium
Black Tone
Off
Flesh Tone
0
RGB Only Mode
Colour Space
Off
Native
White Balance
10p White Balance
Off
Adjust the screen contrast.
•• Off / Low / Medium / High
Black Tone
Select the black level to adjust the screen depth.
•• Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
RGB Only Mode
Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation.
-- The displayed image may differ depending on the model.
•• Off / Red / Green / Blue
Colour Space
Adjusts the range and variety of colours (the colour space) available to create images.
•• Auto / Native / Custom
――To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
108
White Balance
Advanced Settings
Adjust the colour temperature for a more natural picture.
•• R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
White Balance
10p White Balance
Gamma
•• R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Off
0
Expert Pattern
Off
Motion Lighting
Off
•• Reset: Resets the White Balance to its default settings.
10p White Balance
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
•• Off / On
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
-- The displayed image may differ depending on the model.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
――Available when the Picture Mode is set to Movie and when the external input is set to all input.
――Some external devices may not support this function.
Gamma
Adjust the primary colour intensity.
109
Expert Pattern
Advanced Settings
Use the Expert Pattern function to calibrate the picture.
If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibration and the
Expert Pattern screen disappears.
White Balance
10p White Balance
Gamma
Off
0
Expert Pattern
Off
Motion Lighting
Off
•• Off: Turns the Expert Pattern function off.
•• Pattern1: This test screen demonstrates the effect of the display settings on shades of grey and black.
•• Pattern2: This test screen demonstrates the effect of the display settings on colours.
――After selecting Pattern1 or Pattern2, you can adjust any of the advanced settings for desired effect.
――While the Expert Pattern is running, sound is not outputted.
――Only enabled on Component, HDMI1, HDMI2 modes.
Motion Lighting
-- The displayed image may differ depending on the model.
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
•• Off / On
110
Picture Options
Select an option using the ▲ and ▼ arrow keys, and the press E.
MENUm → Picture → Picture Options → ENTERE
Input source
Use the arrow keys to change the setting, and then press E.
PC, DVI
Picture Options
Colour Tone
Standard
Colour Temp.
10000K
Digital Noise Filter
Off
MPEG Noise Filter
Off
HDMI Black Level
Normal
Film Mode
Off
Motion Plus
Off
Picture Mode
Picture Options
Information
Colour Tone / Colour Temp. / HDMI Black Level /
Dynamic Backlight
Advertisement
Colour Tone / Colour Temp. / Digital Noise Filter /
MPEG Noise Filter / HDMI Black Level / Motion Plus /
Dynamic Backlight
Information
Colour Tone / Colour Temp. / HDMI Black Level /
Dynamic Backlight
Advertisement
Colour Tone / Colour Temp. / Digital Noise Filter /
MPEG Noise Filter / HDMI Black Level / Motion Plus /
Dynamic Backlight
Information
Colour Tone / Colour Temp. / Dynamic Backlight
Advertisement
Colour Tone / Colour Temp. / Digital Noise Filter /
MPEG Noise Filter / Motion Plus / Dynamic Backlight
HDMI1, HDMI2
Dynamic, Standard, Natural,
Movie
Colour Tone / Colour Temp. / Digital Noise Filter /
MPEG Noise Filter / HDMI Black Level / Motion Plus /
Dynamic Backlight
AV, Component, HDMI1
(1080i), HDMI2 (1080i)
Dynamic, Standard, Natural,
Movie
Colour Tone / Colour Temp. / Digital Noise Filter /
MPEG Noise Filter / Film Mode / Motion Plus / Dynamic
Backlight
HDMI1(when a PC is
connected), HDMI2 (when a
PC is connected)
DisplayPort
-- The displayed image may differ depending on the model.
111
Colour Tone
Picture Options
Colour Tone
Standard
Colour Temp.
10000K
Digital Noise Filter
Off
MPEG Noise Filter
Off
If the input source is PC, DVI, DisplayPort or HDMI1 (PC connection), HDMI2 (PC connection).
•• Off / Cool / Standard / Warm
If the input source is AV, Component, HDMI1 or HDMI2.
•• Off / Cool / Standard / Warm1 / Warm2
――Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic.
――Settings can be adjusted and stored for each external device connected to an input on the product.
Colour Temp.
-- The displayed image may differ depending on the model.
Adjust the colour temperature (Red/Green/Blue). (Range: 3000K–15000K)
――This option is available when Colour Tone is set to Off.
Digital Noise Filter
If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature to reduce any static
and ghosting that may appear on the screen.
•• Off / Low / Medium / High / Auto
――When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•• Off / Low / Medium / High / Auto
112
HDMI Black Level
Picture Options
HDMI Black Level
Normal
Selects the black level on the screen to adjust the screen depth.
•• Normal / Low
――Available only in HDMI1, HDMI2 and DVI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Film Mode
Off
Motion Plus
Off
Film Mode
Dynamic Backlight
Off
This mode is suitable to view movies.
Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
-- The displayed image may differ depending on the model.
•• Off / Auto1 / Auto2
――Available in AV, Component, HDMI1(1080i). or HDMI2(1080i).
Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
The menu names may vary depending on the country.
Off : Switches Motion Plus off.
Clear : Sets Motion Plus to Clear (suitable for viewing moving images clearly) mode.
Standard : Sets Motion Plus to Standard mode.
Smooth : Sets Motion Plus to Smooth (suitable for viewing moving images naturally) mode.
Custom : Use to reduce the afterimage and judder as much as you want.
Demo : Demonstrates Motion Plus (the picture will be displayed on the left half of the screen when Motion Plus is set to On).
•• Blur Reduction : Use to reduce the afterimage as much as you want.
-- This is only supported if the Motion Plus is set to Custom.
•• Judder Reduction : Use to reduce the judder as much as you want.
-- This is only supported if the Motion Plus is set to Custom.
•• Reset: Restore Motion Plus settings to default values.
-- The colour on screen may vary with this option unintentionally.
-- Disabled when PIP is set to On.
113
Dynamic Backlight
Picture Options
Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
HDMI Black Level
Normal
Film Mode
Off
Motion Plus
Off
Dynamic Backlight
Off
•• Off / On
――The Dynamic Backlight is not available when the input source is set to PC, AV Component while Video Wall is On.
-- The displayed image may differ depending on the model.
Reset Picture
Resets your current picture mode to its default settings.
MENUm → Picture → Reset Picture → ENTERE
Picture
Reset Picture
-- The displayed image may differ depending on the model.
114
Chapter 06
Sound Adjustment
Configure the sound (Sound) settings for the product.
Sound Mode
You can select a sound mode to suit your personal preferences.
•• Standard: Selects the normal sound mode.
MENUm → Sound → Sound Mode → ENTERE
•• Movie: Provides the best sound for movies.
•• Clear Voice: Emphasizes voices over other sounds.
Sound
Sound Mode
•• Music: Emphasizes music over voices.
Standard
•• Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
――If Speaker Select is set to External, Sound Mode is disabled.
Sound Effect
Speaker Settings
Reset Sound
-- The displayed image may differ depending on the model.
115
Sound Effect
Configure your preferred sound effect for output sound.
――If Speaker Select is set to External, Sound Effect is disabled.
MENUm → Sound → Sound Effect → ENTERE
Sound
Sound Mode
Standard
Sound Effect
Speaker Settings
Reset Sound
――Available only when Sound Mode is set to Standard.
•• Virtual Surround (Off / On)
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head
Related Transfer Function) technology.
•• Dialog Clarity (Off / On)
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be
heard more clearly.
•• Equaliser
Use Equaliser to customize sound setting for each speaker.
-- Balance L/R: Adjusts the balance between the right and left speaker.
-- 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
-- Reset: Resets the equalizer to its default settings.
-- The displayed image may differ depending on the model.
116
Speaker Settings
MENUm → Sound → Speaker Settings → ENTERE
――When you set Speaker Select to External, the products speakers are turned off.
You will hear sound through the external speakers only. When the Speaker Select is set to Internal, both the product
speakers and the external speakers are on. You will hear sound through both.
Sound
Sound Mode
•• Speaker Select (External / Internal)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo
caused by the difference in decoding speed between the products speakers and the speakers attached to your audio
receiver. If this occurs, set the product to External.
Standard
Sound Effect
Speaker Settings
Reset Sound
――If there is no video signal, both the products speakers and the external speakers will be mute.
•• Auto Volume (Off / Normal / Night)
The volume can vary depending on the channel.
Automatically equalize the volume level when switching to another channel.
-- Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the
same.
-- Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night,
when you may want to keep the volume low.
――To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of
the connected source device may not be applied if Auto Volume is set to Normal or Night.
-- The displayed image may differ depending on the model.
117
Reset Sound
Reset all sound settings to the factory defaults.
MENUm → Sound → Reset Sound → ENTERE
Sound
Sound Mode
Standard
Sound Effect
Speaker Settings
Reset Sound
-- The displayed image may differ depending on the model.
118
Chapter 07
Network
Network Settings
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
MENU m → Network → Network Settings → ENTER E
•• You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem
using a LAN cable. See the diagram below.
Network Settings
LAN
External Modem
(ADSL / VDSL)
The Modem Port on the Wall
The next step is to set up a wireless network using an
internal LAN Adapter.
RJ45
Start
Cancel
If you want to connect to your wired network, plug in a
network cable.
-- The displayed image may differ depending on the model.
Modem Cable
LAN Cable
•• You can attach your product to your LAN by connecting the LAN port on the back of your product to an IP Sharer which
is connected to an external modem. Use LAN cable for the connection. See the diagram below.
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL)
Modem Cable
IP Sharer
(having DHCP server)
LAN Cable
RJ45
LAN Cable
119
•• Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly
to a network wall outlet using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
LAN
The LAN Port on the Wall
RJ45
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports the Dynamic Host Configuration Protocol (DHCP). Modems and routers that
support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your product needs to access the Internet so you do not have to enter them
manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on
your product Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service
Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
――You can use ADSL modems that support DHCP if your network requires a Static IP address.
――ADSL modems that support DHCP also let you use Static IP addresses.
120
Wired Network Settings
Set the network connection to use Internet services such as perform software upgrades.
Automatic Network Settings
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Go to the Network Settings screen. Select Start, press E, and then press E again.
2
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection completed.” message appears.
――If the connection process fails, check the LAN port connection.
――If the automatic process cannot find the network connection values or if you want to set the connection manually, go to the next section, network setup.
121
Manual Network Settings
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1
Go to the Network Settings screen. Select Start, press E, and then press E again.
2
The network test screen appears and the verification process starts. Press Stop. The verification process stops.
3
Select IP Settings on network connection screen. The IP Settings screen appears.
4
Select the field at the top, press E, and then set IP Setting to Enter manually. Repeat the entry process for each field in the IP Address.
――Setting IP Setting to Enter manually automatically changes DNS setting to Enter manually.
5
When done, select OK at the bottom of the page, and then press E. The network test screen appears and the verification process starts.
6
When the connection has been verified, the “Wired network and Internet connection completed.” message appears.
122
Connecting to a Wireless Network
To connect your product to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you
connect to your product back or side panel USB port. See the illustration below.
Wireless IP sharer
(router having DHCP server)
Product Panel
The LAN Port on the Wall
Samsung Wireles LAN Adapter
LAN Cable
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports
the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play
smoothly.
――You must use the “Samsung Wireless LAN adapter” (WIS10ABGN, WIS12ABGNX) to use a wireless network.
The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers, Ecommerce sites, and Samsungparts.com.
――Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby,
this will result in interference and communication failure.
――Your product supports only the following wireless network security protocols.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router,
Samsung products will not support a connection in compliance with new Wi-Fi certification specifications.
――If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification
Number). WPS will automatically configure the SSID and WPA key in either mode.
――If your router, modem, or device is not certified, it may not connect to the product via the “Samsung Wireless LAN adapter”.
――Ensure the product is turned on before you connect the “Samsung Wireless LAN adapter”.
――Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)
――The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product with a USB hub or USB extension cable other than the cable
supplied with the product.
123
Wireless Network Setting
Automatic Network Setup
Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security
for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass
Phrase during the the automatic or manual setup process.
How to set up automatically
1
Go to the Network Settings screen. Select Start, press E.
2
The Network function searches for available wireless networks. When done, it displays a list of the available networks.
3
In the list of networks, press the
or
button to select a network, and then press the E button twice.
――If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name and Security Key to establish the
connection.
4
If the Enter security key. screen appears, go to step 5. If you select a wireless router that does not have security, go to step 7.
5
If the router has security, enter the Security Key (Security Key or PIN).
6
When done, use the right arrow button to move the cursor to Next, and then press E. The network connection screen appears and the verification process starts.
――A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the “Your wireless network and Internet connection are setup and ready to use.” message appears.
124
Manual Network Setup
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
125
How to set up manually
1
Go to the Network Settings screen. Select Start, press E.
2
The Network function searches for available wireless networks. When done, it displays a list of the available networks.
3
In the list of networks, press the
or
button to select a network, and then press the E button twice.
――If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name and Security Key to establish the
connection.
4
If the Enter security key. screen appears, go to step 5. If you select a wireless router that does not have security, go to step 7.
5
If the router has security, enter the Security Key (Security Key or PIN).
6
When done, use the right arrow button to move the cursor to Next, and then press E. The network connection screen appears and the verification process starts.
7
Select Stop while network connections are being attempted. This will stop the connection.
8
Select IP Settings on network connection screen. The IP Settings screen appears.
9
Select the field at the top, press E, and then set IP Setting to Enter manually. Repeat the entry process for each field in the IP Address.
――Setting IP Setting to Enter manually automatically changes DNS setting to Enter manually.
10When done, select OK at the bottom of the page, and then press E. The network test screen appears and the verification process starts.
11When the connection has been verified, the “Your wireless network and Internet connection are setup and ready to use.” message appears.
126
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1
Go to Network Settings screen.
2
Select WPS(PBC), press E, and then press E again.
3
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires all the network setting values it needs and connects to your
network.
4
The network connection screen appears, and network setup is done.
127
Network Status
You can check the current network and Internet status.
MENU m → Network → Network Status → ENTER E
Network Status
Your wireless network and Internet connection are setup and ready to use.
00 : 12 : fb : df : 29 : 76
***. ***. ***. ***.
***. ***. ***. ***.
***. ***. ***. ***.
***. ***. ***. ***.
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
You are connected to the Internet. If you have any problems using online
services, please contact your Internet service provider.
IP Settings
Retry
Close
――The displayed image may differ depending on the model.
128
Wi-Fi Direct
-- To use this function, your mobile device
should be supported by the Wi-Fi
Direct.
MENU m → Network → Wi-Fi Direct → ENTER E
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1
Go to Wi-Fi Direct screen. The product starts to search devices.
2
Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
•• PBC (Push Button Configuration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product automatically acquires all the network setting
values it needs and connects to your network.
•• PIN: Input the displayed PIN on your device.
――If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.
129
Soft AP
MENU m → Network → Soft AP → ENTER E
Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi Direct. Set the options for connection of Wi-Fi device.
•• Soft AP
Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the product name in Wi-Fi connection list.
•• Security Key
Set the Security Key manually using the remote control.
--------
B Show security key: Shows the security key. Whether to show the security key is represented by a checkbox at the top.
A Del.: Deletes the entered security key one digit at a time.
C Space: Inserts a blank space between characters when entering the security key.
Return: Returns to the screen before entering the security key.
The Security Key should consist of more than 8 digits.
Input the generated security key into the device you want to connect.
If network does not operate normally, check the security key again. An incorrect security key may cause a malfunction.
130
AllShare Settings
MENU m → Network → AllShare Settings → ENTER E
Shows a list of mobile phones or connected devices which have been set up to use the AllShare Play function with this product.
•• Allow / Deny: Allows/Blocks the devices.
•• Delete from the list: Deletes the devices from the list.
――This function only deletes the name of the device from the list. If the deleted device is turned on or tries to connect to the product, it may appear on the list again.
Using the AllShare Play Function
An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile phone will be displayed on your product. The contents are played
automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played.
――The first time a device accesses your product through the media function, a warning popup window appears. Press the E button to select Allow. This permits the
phone to access the product freely and use the AllShare Play function to play content.
――To turn off media contents transmissions from a mobile phone, set Deny in the AllShare Settings.
――Contents may not play on your product depending on their resolution and format.
――The E and
/ buttons may not work depending on the type of media content.
――Using the mobile device, you can control the AllShare Play. For details, refer to each mobile’s user’s guide.
Device Name
MENU m → Network → Device Name → ENTER E
Select or enter a device name.
This name can be shown on network remote controls over the network.
131
Chapter 08
System
Multi Control
Configuring settings for Multi Control
•• ID Setup
Assign an ID to a set. (Range: 0~99)
MENUm → System → Multi Control → ENTERE
Press ▲ or ▼ to select a number, and press E.
Multi Control
•• ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
ID Setup
00
ID Input
--
MDC Connection
DisplayPort daisy chain
RS232C MDC
Clone
Enter the number you want using the number buttons on the remote control.
•• MDC Connection
Select a method to connect to MDC to receive the MDC signal.
-- RS232C MDC: Communicate with MDC via the RS232C-stereo cable.
-- RJ45 MDC: Communicate with MDC via the RJ45 cable.
•• DisplayPort daisy chain
To display the DP IN video input through the DP OUT output port, select a device connection method from Single Stream
Transport (SST) and Multi Stream Transport (MST).
Clone: In this Single Stream Transport (SST) output mode, the same screen output is displayed on two display devices
connected.
-- The displayed image may differ depending on the model.
――If Clone is selected, the PC recognizes the two displays as a single monitor.
――Clone mode is enabled if the input source is a digital input other than DisplayPort, such as DVI, HDMI1, HDMI2, or
MagicInfo.
Expand: In this Multi Stream Transport (MST) mode, a different screen output is displayed on two display devices connected.
――If Expand is selected, the PC recognizes the two displays as separate monitors.
――The mode functions only on a PC that supports DisplayPort 1.2 MST.
――For Full HD resolution (1920x1080) displays, a maximum of four displays can be connected.
132
Time
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time
using the Timer function.
MENUm → System → Time → ENTERE
Clock Set
Set the clock to use the various various timer features of the product.
Time
•• Clock Set
Set the Date and Time.
Clock Set
Sleep Timer
Off
끄기
On Timer
Off Timer
Holiday Management
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons
to move from one entry field to the next. Press E when done.
――You can set the Date and Time directly by pressing the number buttons on the remote control.
Sleep Timer
Automatically shuts off the product after a preset period of time.
-- The displayed image may differ depending on the model.
(Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min)
――Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer, select Off.
133
Time
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
On Timer
The power is turned on with the specified volume or input source.
Off Timer
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first.
Holiday Management
(On Timer1 ~ On Timer7)
――You must set the clock before you can use On Timer.
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the
days you want On Timer to turn on your product.
――The check mark indicates days you’ve selected.
-- The displayed image may differ depending on the model.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
•• Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
•• Source: Select the input source of your choice.
•• Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files you
want played when the product turns on automatically.
――This function is available only when a USB device is connected.
――If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not
operate correctly.
――If there is only one photo file in the USB, the Slide Show will not play.
――If a folder name is too long, the folder cannot be selected.
――Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
――We recommend that you use a USB memory stick and a multi card reader when using On Timer. The On Timer function
may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because the
product can take too long to recognize these devices.
134
Time
On Timer
Off Timer
Holiday Management
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer1 ~ Off Timer7)
――You must set the clock before you can use Off Timer.
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the
days you want Off Timer to turn off your product.
――The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
-- The displayed image may differ depending on the model.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•• Add: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the ▲/▼ buttons, and click the Save button.
The period will be added to the list of holidays.
-- Start: Set the start date of the holiday.
-- End: Set the end date of the holiday.
-- Delete: Delete all items from the list of holidays.
Select Delete. The message "Delete all holidays?" will appear.
Select Yes. All holidays will be deleted.
•• Apply: Set the On Timer and Off Timer to not activate on public holidays.
-- Press E to select the On Timer and Off Timer settings you do not want to activate.
-- The selected On Timer and Off Timer will not activate.
135
Menu Language
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions
on your PC.
MENUm → System → Menu Language → ENTERE
System
Time
Menu Language
Rotate menu
English
Landscape
Eco Solution
-- The displayed image may differ depending on the model.
136
Rotate menu
Configure the menu screen.
•• Landscape: Display the menu in landscape mode (default).
MENUm → System → Rotate menu → ENTERE
•• Portrait: Display the menu in portrait mode on the right side of the product screen.
――Available in PC/DVI/HDMI1/HDMI2/DisplayPort/MagicInfo mode.
System
Time
Menu Language
Rotate menu
English
Landscape
Eco Solution
-- The displayed image may differ depending on the model.
137
Eco Solution
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
MENUm → System → Eco Solution → ENTERE
Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
Eco Solution
•• Off / Low / Medium / High / Picture Off
Energy Saving
Off
Eco Sensor
Eco Sensor
Off
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
No Signal Power Off
Off
Auto Power Off
Off
•• Off / On
――Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off.
Min. Backlight
-- The displayed image may differ depending on the model.
When Eco Sensor is On, you can manually adjust the minimum screen brightness. Min. Backlight is the darkest backlight
mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
――If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding
light intensity.
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
•• Off / 15 min / 30 min / 60 min
――Disabled when an attached PC is in power saving mode.
――The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel
within 4 hours to prevent overheating.
•• Off / On
138
Security
Every time you access the Security functions, the PIN screen will appear and the default PIN number is "0-0-0-0" (default
password: 0 - 0 - 0 - 0).
MENUm → System → Security → ENTERE
Safety Lock
It sets safe lock function.
Security
•• Off / On
Safety Lock
Off
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control, will be
locked by the Safety Lock function.
Button Lock
Off
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0 - 0 - 0 - 0).
Change PIN
Button Lock
This menu can be used to lock the buttons on the product.
Only the remote control can control the product if Button Lock is set to On.
-- The displayed image may differ depending on the model.
•• Off / On
Change PIN
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
When the Confirm screen disappears, press the Close button. The product has memorised your new PIN.
139
PIP
PIP Settings
The picture from the external video source will be in the main screen and the picture from the product will be in the PIP subpicture screen.
MENUm → System → PIP → ENTERE
Main picture
System
PIP
Off
Auto Protection Time
Off
Screen Burn Protection
Ticker
Off
Video Wall
Sub picture
PC
AV
AV
PC, DVI, HDMI1, HDMI2, DisplayPort, MagicInfo
HDMI1, HDMI2, DVI, DisplayPort, MagicInfo
AV
•• PIP (Off / On): Activate or deactivate the PIP function.
•• Source: You can select a source of the sub picture.
•• Size (
,
•• Position (
――In (
,
,
,
,
,
,
): Select a size for the subpicture.
,
,
): Select a position for the sub-picture.
,
) mode, you cannot select Position.
•• Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture.
-- The displayed image may differ depending on the model.
-- For PIP sound, refer to the Sound Select instructions.
-- If you turn the product off while watching in the PIP mode, PIP mode will remain after power
Off/On.
-- You may notice that the picture in the PIP screen becomes slightly unnatural when you use
the main screen to view a game or karaoke.
140
Auto Protection Time
If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the
formation of burnt in ghost images on the screen.
•• Off / 2 hours / 4 hours / 8 hours / 10 hours
MENUm → System → Auto Protection Time → ENTERE
System
Auto Protection Time
Off
Screen Burn Protection
Ticker
Off
Video Wall
Source AutoSwitch Settings
-- The displayed image may differ depending on the model.
141
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology.
Pixel Shift moves the picture slightly on the screen.
MENUm → System → Screen Burn Protection → ENTERE
The Pixel Shift Time setting allows you to programme the time between movements of the picture in minutes.
Pixel Shift
Screen Burn Protection
Minimize image retention by finely moving pixels horizontally or vertically.
Pixel Shift
Off
Timer
Off
Immediate display
Off
Side Grey
Off
•• Pixel Shift (Off / On)
――Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On.
•• Horizontal: Sets how many pixels the screen moves horizontally.
•• Vertical: Sets how many pixels the screen moves vertically.
•• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
Available Pixel Shift Settings and Optimum Settings.
Available Settings
-- The displayed image may differ depending on the model.
Optimum Settings
Horizontal (pixels)
0~4
4
Vertical (pixels)
0~4
4
Time (minute)
1 min~4 min
4 min
――The Pixel Shift value may differ depending on the product size (inches) and mode.
――Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a defect in the
product.
――This function is not available in the Screen Fit mode.
142
Timer
Screen Burn Protection
Pixel Shift
Off
Timer
Off
Immediate display
Off
Side Grey
Off
You can set the timer for Screen Burn Protection.
The Pixel Shift feature stops automatically after a specified period of time.
Timer
•• Off
•• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
•• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to
End Time).
――The option is enabled only when Clock Set is configured.
-- The displayed image may differ depending on the model.
――Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.
•• Mode: Select a screen protective pattern to display.
-- Pixel: Pixels on the screen alternate black continuously.
-- Rolling bar: A vertical bar moves left to right.
-- Fading screen: The entire screen becomes brighter, then darker.
――The Rolling bar and Fading screen patterns appear only once regardless of the specified repeat period or time.
•• Period: Specify the time interval to activate the Screen Burn Protection function.
――The option is enabled when Repeat is selected for Timer.
•• Time: Specify the duration to keep the Screen Burn Protection function on.
――The option is enabled when Pixel is selected for Mode.
•• Start Time: Set the start time to activate the screen protection function.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set the end time to deactivate the screen protection function.
――The option is enabled when Interval is selected for Timer.
143
Immediate display
Screen Burn Protection
Pixel Shift
Off
Timer
Off
Immediate display
Off
Side Grey
Off
Select the screen saver you want to display immediately.
•• Off / Pixel / Rolling bar / Fading screen
Side Grey
When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen.
•• Off / Light / Dark
-- The displayed image may differ depending on the model.
144
Ticker
Input text while a video or image is displayed and display the text on the screen.
•• Off / On
――Message, Time, Position, Motion, and Font options are enabled only when Ticker is set to On.
MENUm → System → Ticker → ENTERE
•• Message: Enter a message to display on the screen.
•• Time: Set the Start Time and End Time to display a Message.
System
Auto Protection Time
Off
Screen Burn Protection
Ticker
Video Wall
Source AutoSwitch Settings
Off
•• Position: Select an orientation to display a Message from Horizontal and Vertical.
-- Horizontal (Left / Centre / Right)
-- Vertical (Top / Middle / Bottom)
•• Motion: Specify the Direction and Speed to display a Message.
-- Motion (Off / On)
-- Direction (Left / Right / Top / Bottom)
-- Speed (Slow / Normal / Fast)
――Direction and Speed are enabled only when Motion is set to On.
•• Font options: Specify the message Size and Text colour.
-- The displayed image may differ depending on the model.
145
Video Wall
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo
function.
MENUm → System → Video Wall → ENTERE
Video Wall
Video Wall
Video Wall
On
· Format
Full
· Horizontal
1
· Vertical
1
· Screen Position
You can activate or deactivate Video Wall.
To organize a video wall, select On.
Format
Select a format to display images on multiple displays.
•• Full: Display images in full screen.
•• Natural: Display images at the original resolution without enlarging or reducing.
――The Format option is only enabled when Video Wall is set to On.
-- The displayed image may differ depending on the model.
Horizontal
-- The Video Wall option is only enabled when PIP is set to Off.
This function automatically divides the screen according to the specified number of horizontal displays.
-- If more than four displays are connected horizontally and vertically, it is recommended that
you use an input resolution of XGA (1024 x 768) level or higher to prevent a dark picture due
to degradation in the contrast or colour intensity.
Enter the number of horizontally arranged displays.
The horizontal screen will automatically be divided according to the number entered.
A maximum of 15 displays can be assigned to the horizontal arrangement.
――The screen can be divided into a maximum of 100 screens (horizontal and vertical screens multiplied). For example, if the
horizontal arrangement is set to 15, a maximum of 6 displays can be assigned to the vertical arrangement. Conversely, if the
vertical arrangement is set to 15, a maximum of 6 displays can be assigned to the horizontal arrangement.
――The Horizontal option is only enabled when Video Wall is set to On.
146
Vertical
Video Wall
Video Wall
On
· Format
Full
· Horizontal
1
· Vertical
1
· Screen Position
This function automatically divides the screen according to the specified number of vertical displays.
Enter the number of vertically arranged displays.
The vertical screen will automatically be divided according to the number entered.
A maximum of 15 displays can be assigned to the vertical arrangement.
――The screen can be divided into a maximum of 100 screens (horizontal and vertical screens multiplied). For example, if the
horizontal arrangement is set to 15, a maximum of 6 displays can be assigned to the vertical arrangement. Conversely, if the
vertical arrangement is set to 15, a maximum of 6 displays can be assigned to the horizontal arrangement.
――The Vertical option is only enabled when Video Wall is set to On.
Screen Position
-- The displayed image may differ depending on the model.
You can customize the arrangement of split screens by moving displays identified with a number using the Screen Position
function.
Select Screen Position to display the arrangement of displays (identified with a number) specified according to the
Horizontal or Vertical settings. To customize the arrangement, move a number (display) using the direction buttons on the
remote control and press E.
――A maximum of 100 displays can be arranged in Screen Position.
――The Screen Position option is only enabled when Video Wall is set to On.
――The Screen Position window is only displayed when Horizontal and Vertical are configured.
147
Source AutoSwitch Settings
Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will
automatically search the different video input sources for active video.
MENUm → System → Source AutoSwitch Settings → ENTERE
Source AutoSwitch
When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
Source AutoSwitch Settings
The Primary Source selection will be activated, if the current video source is not recognized.
Source AutoSwitch
On
Secondary Source selection will become active, if no primary video source is available.
· Primary Source Recovery
Off
If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source,
each search checking the primary and then secondary source. If both searches fail, the display will return to the first video
source and display a message indicating that there is no signal.
· Primary Source
All
· Secondary Source
PC
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking
for an active video source, returning back to the first video source in the sequence if no video is found.
Primary Source Recovery
-- The displayed image may differ depending on the model.
Select whether to restore the selected primary input source when a primary input source is connected.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
148
General
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
MENUm → System → General → ENTERE
•• Off / On
――Available only PC, DVI, HDMI1, HDMI2, DisplayPort mode.
General
Max. Power Saving
On
Game Mode
Off
BD Wise
On
Menu Transparency
Sound Feedback
Medium
Low
Auto Power
Standby Control
Off
Auto
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
•• Off / On
――Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
――Game Mode is not available when the input source is set to PC, DVI or DisplayPort.
――If Game Mode is On
Picture Mode is set to Standard and Sound Mode is set to Movie.
BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise. When BD
Wise is turned On, the picture mode is automatically changed to the optimal resolution.
-- The displayed image may differ depending on the model.
•• Off / On
――Available when you connect Samsung products that support BD Wise through an HDMI cable to the product.
――The BD Wise function is enabled only when a source device with the BD Wise function is connected.
Menu Transparency
Adjust transparency of menu box.
•• High / Medium / Low
149
Sound Feedback
General
Sound Feedback
Low
Auto Power
Off
Standby Control
Auto
Lamp Schedule
Off
Sound Feedback is enabled by default. Turn off Sound Feedback or adjust its volume.
This function is enabled by default. The volume can be adjusted or muted.
――Off / Low / Medium / High
Auto Power
Enabling this option will automatically power on the product if the power cable is connected.
OSD Display
Power On Adjustment
Your product gives sound feedback when you use product.
0 Sec
Temperature Control
77
•• Off / On
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•• Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
-- The displayed image may differ depending on the model.
The message No Signal will appear if no source device is connected.
•• On
Power-saving mode will activate if no input signals are detected.
•• Off
The message No Signal will appear if no input signals are detected.
――The Standby Control option is only enabled when Source is set to PC, DVI, HDMI1, HDMI2 or DisplayPort.
――If No Signal is displayed although a source device is connected, check the cable connection.
150
Lamp Schedule
General
Sound Feedback
Low
Auto Power
Off
Standby Control
Auto
Lamp Schedule
Off
OSD Display
Power On Adjustment
0 Sec
Temperature Control
77
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
•• Off / On
OSD Display
Displays or hides a menu item on the screen.
――Source OSD / No Signal OSD / MDC OSD
Power On Adjustment
You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds)
――A warm-up time that is too short may damage the product due to overvoltage.
Temperature Control
-- The displayed image may differ depending on the model.
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77 C.
The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C).
――The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature
continues to rise, the product will power off to prevent overheating.
151
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
MENUm → System → Anynet+ (HDMI-CEC) → ENTERE
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
Anynet+ (HDMI-CEC)
――The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
Anynet+ (HDMI-CEC)
On
――Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
Auto Turn Off
Yes
Receiver
Off
AV device is connected as a secondary display.
――Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
――While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not work if the
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product.
-- The displayed image may differ depending on the model.
-- The Anynet+ functions do not operate with other manufacturers’ products.
-- For instructions explaining how to connect Anynet+ external devices, refer to the device’s user
manual.
-- You can connect only one receiver (home Theatre).
Anynet+ Menu
Description
View PC
Changes Anynet+ mode to PC mode.
Device List
Shows the Anynet+ device list.
(device_name) MENU
Shows the menu of the connected device menus. E.g. if a DVD player is connected,
the disc menu of the DVD player will appear.
(device_name) Tools
Shows the tools menu of the connected device. E.g. if a DVD player is connected, the
tools menu of the DVD player will appear.
――Depending on the device, this menu may not be available.
(device_name) Title Menu
Shows the title menu of the disc in the connected device. E.g. If a DVD player is
connected, the title menu of the movie in the DVD player will appear.
――Depending on the device, this menu may not be available.
152
Auto Turn Off
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
On
Auto Turn Off
Yes
Receiver
Off
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
•• No / Yes
――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.
――May not be enabled depending on the device.
Switching between Anynet+ Devices
-- The displayed image may differ depending on the model.
1
Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E.
2
Select Device List, and then press the E button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the E button. You can switch to the selected device.
――The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
――Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in
progress.
――If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use
the Anynet+ function.
――Make sure to switch to an Anynet+ device by using the Device List.
153
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•• Check if the Anynet+ device power cord is properly connected.
•• Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+setup menu.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (initial setup)
•• If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your product
off and on again.
•• Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to On in the
Anynet+ Setup menu.
•• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
•• Select View PC in the Anynet+ menu.
•• Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The message “Disconnecting
Anynet+ device ...” appears on
the screen.
•• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
The Anynet+ device does not
play.
•• You cannot use the play function when initial setup is in progress.
•• Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
154
Problem
The connected device is not
displayed.
Possible Solution
•• Check whether or not the device supports Anynet+ functions.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
•• Search Anynet+ devices again.
•• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
•• Some HDMI cables may not support Anynet+ functions.
•• If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please
repeat the device scan.
155
DivX® Video On Demand
MENUm → System → DivX® Video On Demand → ENTERE
Shows the registration code authorized for the product.
If you connect to the DivXⓇ web site and register using that code, you can download the VOD registration file.
For more information about DivXⓇ VOD, visit “http://vod.divx.com”.
System
DivX® Video On Demand
-- The displayed image may differ depending on the model.
Play Mode
Select Play Mode.
Changing Play Mode will change the functions in Contents Home.
MENUm → System → Play Mode → ENTERE
System
Play Mode
•• MagicInfo Lite / MagicInfo Premium S / MagicInfo Videowall S
――Changing Play Mode will automatically reboot the product and apply changes.
――Changing Play Mode will reset all the previous settings configured in Play Mode.
MagicInfo Lite
-- The displayed image may differ depending on the model.
156
Magic Clone
MENUm → System → Magic Clone → ENTERE
Magic Clone
Clone to USB
Clone From USB
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
•• Clone to USB: Copy the product settings to a USB device.
•• Clone From USB: Assign the settings saved in a USB device to the product.
-- After configuration is complete, the product is rebooted automatically.
――The option may not work properly if the USB device contains a file other than a settings file.
――Confirm that the USB device functions properly before running the option.
――The option is available for products with the same Model Code and Software Version.
Go to Support → Contact Samsung and find the product Model Code and Software Version.
-- The displayed image may differ depending on the model.
Reset System
This option returns the current settings under system to the default factory settings.
MENUm → System → Reset System → ENTERE
System
Reset System
-- The displayed image may differ depending on the model.
157
Reset All
This option returns all the current settings for a display to the default factory settings.
MENUm → System → Reset All → ENTERE
System
Reset All
-- The displayed image may differ depending on the model.
PC module power
MENUm → System → PC module power → ENTERE
The PC module can be turned on/off separately from the LFD.
Synced power-on
To turn on the PC module without turning on the LFD, select Off.
System
PC module power
•• Off / On
Synced power-off
To turn off the LFD without turning off the PC module, select Off.
•• Off / On
-- The displayed image may differ depending on the model.
-- PC module: Refers to network boxes or PIM.
158
Chapter 09
Support
Software Update
MENUm → Support → Software Update → ENTERE
-- Current Version: This is the software
version already installed in the product.
The Software Update menu lets you upgrade your product software to the latest version.
――Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
――When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can
easily reset them after the upgrade.
By USB
-- Please be careful not to remove the USB
drive until the upgrade is complete.
1
Visit http://www.samsunglfd.com
2
Download the latest USB software upgrade exe archive to your computer.
3
Extracts the exe archive to your computer. You should have a single folder with the same name as the exe file.
4
Copy the folder to a USB flash drive.
5
Turn on the product, and then insert the USB flash drive into the USB port of the product.
6
In the product menu, go to Support → Software Update.
7
Select By USB.
159
Contact Samsung
MENUm → Support → Contact Samsung → ENTERE
View this information when your product does not work properly or when you want to upgrade the software.
You can find information regarding our call Centres and how to download products and software.
――Contact Samsung and find the product Model Code and Software Version.
160
Contents Home
MagicInfo Lite
MENUm → Support → Contents Home → ENTERE
MENU m → Support → Contents Home → MagicInfo Lite → ENTER E
――MagicInfo Lite can also be accessed by pressing MagicInfo Lite/S on the remote control.
――To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode on the System.
Support
Contents Home
MagicInfo Lite player allows you to play content (image, video, document files) at a desired time.
You can play content saved in Internal memory or USB memory. You can also play content via MagicInfo Lite Server after
connecting to a network.
――Refer to page 179 for details about the MagicInfo Lite menu.
MagicInfo Premium S
-- The displayed image may differ depending on the model.
MENU m → Support → Contents Home → MagicInfo Premium S → ENTER E
――MagicInfo Premium S can also be accessed by pressing MagicInfo Lite/S on the remote control.
――To launch MagicInfo Premium S, select MagicInfo Premium S for the Play Mode on the System.
――A licence needs to be purchased to use MagicInfo Premium S.
MagicInfo Premium S Player can be used to edit and play content files including templates such as images, videos and
documents.
Play content files and templates from USB memory or built-in memory. Alternatively, play content files and templates via
MagicInfo Premium Server over a network.
――Refer to page 202 for details about the MagicInfo Premium S menu.
MagicInfo Videowall S
MENU m → Support → Contents Home → MagicInfo Videowall S → ENTER E
――MagicInfo Videowall S can also be accessed by pressing MagicInfo Lite/S on the remote control.
――To launch MagicInfo Videowall S, select MagicInfo Videowall S for the Play Mode on the System.
――A licence needs to be purchased to use MagicInfo Videowall S.
MagicInfo Videowall S Player allows you to play content at a desired time. Content that can be played includes VideoWall
content created in MagicInfo VideoWall Author in addition to other image and video files.
Content can be played only through VideoWall Console over a network.
――Refer to page 229 for details about the MagicInfo Videowall S menu.
161
AllShare Play
MENU m → Support → Contents Home → AllShare Play → ENTER E
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
――Refer to page 163 for details about the AllShare Play menu.
Source
-- The input source can also be changed
by using the SOURCE button on the
remote control.
MENUm → Support → Contents Home → Source → ENTERE
You can display the screen of a source device connected to the product. Select a source from Source list to display the screen of the selected source.
Edit Name
MENUm → Support → Contents Home → Source → TOOLS → Edit Name → ENTERE
Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name.
In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality.
――The list can include the following source devices. Source devices on the list differ depending on the selected source.
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA
――Available settings in the Picture menu depend on the current source and settings made in Edit Name.
•• When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV devices.
•• When connecting a PC to the HDMI IN 1 or HDMI IN 2 port with HDMI cable, you should set the product to PC mode under Edit Name.
•• When connecting a PC to the HDMI IN 1 or HDMI IN 2 port with HDMI to DVI cable, you should set the product to DVI PC mode under Edit Name.
•• When connecting an AV devices to the HDMI IN 1 or HDMI IN 2 port with HDMI to DVI cable, you should set the product to DVI Devices mode under Edit Name.
Information
MENUm → Support → Contents Home → Source → TOOLS → Information → ENTERE
You can see detailed information about the selected external device.
162
Chapter 10
AllShare Play
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
What is AllShare Play?
AllShare Play can also be accessed by
pressing CONTENET(HOME) on the
remote control.
Play photo, video or music files saved on a storage device. Wirelessly connect a smartphone to a PC using a wireless network.
Play various content using one of the following methods in AllShare Play:
•• Using internal memory and a USB device: Play video, photo and music files from a USB device. Copy the files to the internal memory.
•• Connecting to a PC over a network: Play photo, video and music files saved on a PC through a network connection.
Read the following before using AllShare Play with a USB device
Caution
•• Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost.
Samsung Electronics is not liable for any damage or loss of data.
•• Do not remove a USB device while it is loading.
•• If a USB device is connected using a USB extension cable, the USB device may not be recognized or files saved on the device may not be able to be read.
•• If the product does not recognize a connected USB device, the files on the USB device may be corrupted or may not be able to be played.
If this occurs, connect the USB device to the PC to format the device, then make sure the device is connected properly.
•• USB HDD greater than 2TB is not supported.
163
Compatible devices with AllShare Play
•• Some types of USB devices, digital cameras and audio devices may not be compatible with the product.
•• AllShare Play is only compatible with USB MSC devices.
•• MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs
are not supported.)
These MSC devices must be connected directly to a USB port on the product.
•• If more than one Picture Transfer Protocol (PTP) device is connected, only one will work at a time.
•• If multiple MSC devices are connected, some devices may not be recognized. USB devices that require high power (higher than 500mA or 5V) may not be supported.
•• If an overheating warning message appears when a USB device is connected or used, the USB device may not be recognized or function properly.
•• The screensaver activates if the product is left idle for a period of time specified in Auto Protection Time.
•• Power-saving mode on some external hard disk drives may automatically deactivate after connecting to the product.
File system and formats
•• AllShare Play may not function properly with unlicenced multimedia files.
•• Media Transfer Protocol (MTP) is not supported.
•• Supported file systems include FAT16, FAT32 and NTFS (read only).
•• AllShare Play supports the sequential JPEG format.
It does not support the progressive JPEG format.
•• Images with a higher resolution take longer to be displayed on the screen.
•• The maximum JPEG resolution supported is 15360x8640 pixels.
•• If a file is incompatible or corrupted, a message Not Supported File Format. appears.
•• When sorting files in folder view mode, a maximum of 1000 files can be displayed in each folder.
•• If a USB device contains 8000 files and folders or more, some files and folders may not open.
•• DRM MP3 files downloaded from websites that charge a fee cannot be played.
Digital Rights Management (DRM) refers to a system for protecting the copyrights of data circulated via the Internet or other digital media by enabling secure
distribution and/or disabling illegal distribution of the data.
164
Using a USB device
Connecting a USB device
It is recommended to use a USB HDD that
has a power adapter.
1
Turn on your product.
2
Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product.
3
A message New device connected. appears when the USB device is connected properly. Select type of content to play from Videos, Photos, and Music.
――If only one USB device is connected, files saved on the USB device are displayed automatically.
――To view content saved on a USB device, connect the USB device to a USB port on the product.
Removing a USB device
Removing a USB device from Source
It is recommended to remove a USB
device using the Safely Remove USB
Device function.
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
MENUm → Support → Contents Home → Source → ENTERE
2
Select a USB device and press TOOLS on the remote control. Tools option appears.
3
Select Safely Remove USB Device and wait until the USB device is disconnected. The USB device is disconnected.
Deleting AllShare Play from the screen
1
Go to the AllShare Play page.
MENUm → Support → Contents Home → AllShare Play → ENTERE
2
Select all options except My list and press E on the remote control.
3
Select a USB device and press TOOLS on the remote control. Tools option appears.
4
Select Safely Remove USB Device and wait until the USB device is disconnected. The USB device is disconnected.
165
Connecting to a PC over a network
Play photo, video and music files saved on a PC through a network connection in AllShare Play mode.
•• For details on how to configure a network, refer to the section Network Settings.
•• To view content saved on the PC, connect the product and PC to the same wireless router and visit http://www.samsung.com to download the AllShare PC software.
•• Ensure the product and PC are connected to the same network subnet.
All IP addresses are made up of four parts separated by dots.
(E.g. IP address 111.222.333.444) The product should have the same IP address as the PC, except for the fourth part of the address, if they are connected to the same
subnet. (E.g. 111.222.333.***)
When connected to a PC over a network, AllShare Play does not support the following features.
•• Background Music On and Background Music Setting features
•• Feature that sorts files in the Videos, Photos or Music folder according to the default setting
π or µ feature during video playback
•• DivXⓇ DRM is not supported.
•• Make sure you set the Windows firewall programme to permit the AllShare PC software.
•• When using AllShare Play mode through a network connection, available functions may vary depending on the server as follows:
-- Available sorting modes may vary.
-- The Scene Search function may not be supported.
-- The resume function may not be available for multiple users.
(The function only remembers the point where the most recent user stopped playing a video.)
-- The search function may not work depending on the content information.
•• You may experience file stuttering while playing video content over a network connection.
166
Using the AllShare Play features
If you connect the product and a source device such as a cell phone or PC to the same network, you can play media content saved on the device such as videos, photos
and music.
Visit http://www.samsung.com or contact the Samsung Electronics Customer Centre for more information.
Additional software may need to be installed on your mobile device.
Refer to the mobile device user manual for details.
――Connect your Samsung display product to a network through AllShare Play and use the special features provided by Samsung as follows:
•• Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.)
•• Video thumbnail feature
•• Bookmark feature (to resume video playback)
•• Auto-chaptering (scene search)
•• Digital Content Management
•• Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT)
•• Search with file names
•• And many others
――A compatibility issue may occur if a video file is played when a server not provided by Samsung Electronics is connected.
――To use AllShare Play, go to http:// www.samsung.com and download the AllShare software.
167
Using the Basic AllShare Play
Features
MENUm → Support → Contents Home → AllShare Play → ENTERE
Sorting the file lists
To sort files, press D on the remote control to specify the sorting criteria.
Sort Criteria
Operation
Videos
Photos
Music
Folder view
Displays the whole folder. You can view the file
name and thumbnail by selecting the folder.
c
c
c
Title
Sorts and displays the file title in Symbol/Number/
Alphabet/Special order.
c
c
c
Latest Date
Sorts and shows files by the latest date.
c
c
Earliest Date
Sorts and shows files by the earliest date.
c
c
Monthly
Sorts and shows photo files by month.
Artist
Sorts the music file by artist in alphabetical order.
c
Album
Sorts the music file by album in alphabetical order.
c
Genre
Sorts music files by the Genre.
c
AllShare Play / My List /
Recently Played
My List
Videos
Recently played files will be displayed here.
What's new
Updated files will be displayed here.
Photos
Playlist
Music
No playlists have been created.
Create a playlist to quickly and easily access your content.
Return
The displayed image may differ depending on the model.
c
168
Playing Selected Files
Creating a Playlist
1
Select files from the list of Videos, Photos, or Music files.
1
Select files from the list of Videos, Photos, or Music files.
2
Press TOOLS on the remote control and select Play selection.
2
Press TOOLS on the remote control and select Add to Playlist.
――The option does not appear if a folder is highlighted by the cursor.
3
Select files and press Play.
――The option does not appear if a folder is highlighted by the cursor.
3
Select files and press Add.
The Add to Playlist page appears.
――cappears for selected files.
――To select all the files in the current folder, press Select All.
――cappears for selected files.
――To deselect all the files, press Deselect All.
――To select all the files in the current folder, press Select All.
――To deselect all the files, press Deselect All.
Copying Files
4
Select Create new. The Create a new playlist.. page appears.
1
Select files from the list of Videos, Photos, or Music files.
5
Enter a playlist name using the remote control and select Done.
2
Select a storage device.
6
A playlist is created.
•• Internal Memory: Copy files from Internal Memory to a USB devices. memory device.
To play the created playlist, select Play.
•• USB devices.: Copy files from a USB devices. memory device to Internal Memory.
To return to the list of files, select OK.
3
Press TOOLS on the remote control and select Send.
7
A created Playlist is displayed in My list.
The option does not appear if a folder is highlighted by the cursor.
4
Select files and press Send.
――cappears for selected files.
――To select all the files in the current folder, press Select All.
――To deselect all the files, press Deselect All.
169
My list
MENUm → Support → Contents Home → AllShare Play → My list → ENTERE
Access desired content more conveniently and quickly.
To play files, select files or a Playlist and press E.
•• Recently played: Display video, photo or music files that were recently played. This mode is suitable when playing files again that were played before.
•• What's new: Display new video, photo or music files that were uploaded to a PC or USB device. This mode is suitable when playing new files that were recently
uploaded.
•• Playlist: Display Playlist files saved on a PC or USB device. To play a Playlist, select the desired Playlist.
My list options
Option Name
Operations
Recently played
What's new
Playlist
Play
Play a selected file or Playlist.
c
Remove
Delete a selected file.
c
Delete
Delete a selected Playlist.
c
Edit playlist
Edit a selected Playlist.
c
Information
View information about a selected file or Playlist.
c
c
c
c
c
170
Videos
MENUm → Support → Contents Home → AllShare Play → Videos → ENTERE
Playing a Video
1
Select the internal memory or a USB device. Select files from the list of files.
2
Press the E button or ∂ (Play) button.
•• The file name appears on the top with its playing time.
•• If video time information is unknown, the playing time and progress bar are not displayed.
•• During video playback, you can search using the ◄ and ► buttons.
•• You can use the π(REW), µ(FF), ∑(Pause), ∫(Stop), and ∂(Play) buttons on the bottom of your remote during playback.
( π 3 / π 2 / π 1 / µ 1 / µ 2 / µ 3)
•• Press the RETURN button to exit the movie
Using the Play Continuously Function (Resume Play)
If you exit a movie when it is playing, you can play the movie later from the point where you stopped it.
-- The Resume function does not support
multiple users. (It will only memorise
the point where the most recent user
stopped playing.)
1
Select a file from the list of files.
2
Press the ∂(Play) or E button.
3
The Movie will begin to play from where you stopped it.
――Resume is only available when you resume playing a movie you had stopped.
――Press the ∑ button for pause.
171
Photos
MENUm → Support → Contents Home → AllShare Play → Photos → ENTERE
Viewing a Photo (or Slide Show)
1
Select the internal memory or a USB device. Select a file from the list of files.
2
Press the E button.
•• To view files manually, one at a time, press the left or right arrow buttons.
•• To start the slide show, press the ∂(Play) button when the file you selected is displayed.
•• During the slide show, all files in the file list are displayed in order, starting from the file you selected.
――If you select the wrong background music, you cannot change the music until the BGM (Background Music) has finished loading.
――During a slide show, press the TOOLS button to access additional functions such as Go to Photos List, Stop Slide Show, Slide Show Speed, Slide Show Effect,
Background Music On / Background Music Off, Background Music Setting, Picture Mode, Sound Mode, Zoom, Rotate and Information.
――You can use the ∑(Pause), ∫(Stop), and ∂(Play) buttons on the bottom of your remote during a slide show.
――When you press the ∫(Stop) or RETURN button, the slide show stops and the main photo screen re-appears.
172
Music
MENUm → Support → Contents Home → AllShare Play → Music → ENTERE
Playing Music
1
Select the internal memory or a USB device. Select files from the list of files.
2
Press the E button or ∂(Play) button.
•• When the music is playing, you can search using the π(REW) and µ(FF) button.
――If the sound is abnormal when you play MP3 files, adjust the Equaliser in the Sound menu.
(An over-modulated MP3 file may cause a sound problem.)
173
Videos / Photos / Music Play Option menu
-- Pressing the INFO button while a
device name is selected will display
information about the selected device.
-- Pressing the INFO button while a file is
selected will display information about
the selected file.
When playing video or photo files, you can press the TOOLS button to display an Options menu.
Option Name
Operations
Videos
Photos
Music
View
Sort music files grouped by Folder view, Title, Artist, Album
or Genre.
c
Play selection
Select and play files from a list of music files.
c
Go to Videos List
Return to the list of video files.
Go to Photos List
Return to the list of photo files.
Go to the playlist
Go to My list.
Play from the beginning
Play again the currently playing video from the beginning.
c
Scene Search
You can use the Scene Search function during playback to
view or start a movie from the scene of your choice.
c
Title Search
You can move directly to another Title.
c
Time Search
You can search the movie using l and r buttons at intervals of
1 minute.
c
Repeat Mode
You can play movie and music files repeatedly.
c
Picture Size
You can adjust the picture size to your preference.
c
Picture Mode
You can change the Picture Mode.
c
c
c
c
c
174
Option Name
Operations
Videos
Sound Mode
You can change the Sound Mode.
c
Audio Language
You can enjoy video in one of supported languages.
c
Photos
Music
c
The function is enabled only when you play stream-type files
which support multiple audio formats.
Subtitle
You can view a subtitle. You can select a specific language if
the subtitle file contains multiple languages.
c
Subtitle Settings
Displays the Subtitle Settings. You can set up a subtitle
option.
c
Start Slide Show / Stop Slide
Show
You can start or stop a slide show.
Slide Show Speed
You can select the slide show speed during the slide show.
Alternatively, use the π or µ button on the remote.
c
Slide Show Effect
You can set various slide show effects.
c
Background Music On /
Background Music Off
You can start or stop background music.
c
Background Music Setting
You can set and select background music when watching a
photo file or slide show.
c
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images.
c
Information
View file information.
c
Alternatively, use the ∂ or ∑ button on the remote.
c
c
c
175
Supported Subtitle and AllShare Play file formats
Subtitle
External
Internal
•• MPEG-4 timed text (.ttxt)
•• Xsub
Container: AVI
•• SAMI (.smi)
•• SubStation Alpha
Container: MKV
•• SubRip (.srt)
•• SubViewer (.sub)
•• Advanced SubStation Alpha
Container: MKV
•• Micro DVD (.sub or .txt)
•• SubStation Alpha (.ssa)
•• SubRip
Container: MKV
•• Advanced SubStation Alpha (.ass)
•• Powerdivx (.psb)
•• MPEG-4 timed text
Container: MP4
Supported image resolutions
File Extension
Type
Resolution
*.jpg, *.jpeg
JPEG
15360 x 8640
*.png
PNG
1920 x 1080
*.bmp
BMP
1920 x 1080
*.mpo
MPO
15360 x 8640
176
Supported music file formats
File Extension
Type
Codec
Comments
*.mp3
MPEG
MPEG1 Audio Layer 3
*.m4a, *.mpa, *.aac, *.3ga
MPEG4
AAC
*.flac
FLAC
FLAC
The Seek (jump) function is not supported.
Supports up to 2 channel
Supported Video Formats
•• Video content will not play, or not play correctly, if there is an error in the content or the container.
•• Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
•• If the Index Table is in error, the Seek (Jump) function is not supported.
•• You may experience file stuttering while playing a video through a network connection.
•• The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
•• Some USB/digital camera devices may not be compatible with the player.
Video Decoder
Audio Decoder
Supports up to H.264, Level 4.1
Supports up to WMA 10 Pro 5.1 channel.
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
WMA lossless audio is not supported.
For all Video codecs except MVC, VP8, VP6:
QCELP, AMR NB/WB are not supported.
•• Below 1280 x 720: 60 frame max
If Vorbis is only in Webm container, supports up to 2 channel.
•• Above 1280 x 720: 30 frame max
GMC 2 over is not supported.
Supports only BD MVC Spec.
177
File
Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DIVX 3.11 / 4.x / 5.x / 6.x
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
Audio Codec
AC3
LPCM
ADMPCM
MPEG4 SP / ASP
(IMA, MS)
AAC
HE-AAC
H.264 BP / MP / HP
WMA
DD+
Motion JPEG
MPEG(MP3)
DTS Core
*.mpeg
G.711(ALaw,μ-Law)
Window Media Video v9
*.ts
*.tp
*.trp
MPEG2
*.mov
*.flv
MPEG1
*.vob
*.svi
*.m2ts
*.mts
VP6
640 x 480
MVC
1920 x 1080
4
24 / 25 / 30
40
6 ~ 30
8
*.divx
*.webm
WebM
VP8
Vorbis
178
Chapter 11
MagicInfo Lite
-- To launch MagicInfo Lite, select
MagicInfo Lite for the Play Mode on
the System.
File Formats Compatible with MagicInfo Lite player
Read before using MagicInfo Lite player
•• The file system supports FAT16, FAT32 and NTFS.
•• A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played.
Check the vertical and horizontal resolution of the file.
•• Check the supported video and audio Codec types and Versions.
•• Check the supported file versions.
-- Flash version up to 10.1 is supported
-- PowerPoint version up to 97 – 2007 is supported
•• Only the last USB device that was connected is recognized.
179
Contents
File Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DIVX 3.11 / 4.x / 5.x / 6.x
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
Audio Codec
AC3
LPCM
AAC
MPEG4 SP / ASP
HE-AAC
WMA
DD+
H.264 BP / MP / HP
MPEG(MP3)
DTS Core
Motion JPEG
G.711(ALaw,μ-Law)
*.mpeg
*.ts
Window Media Video v9
*.tp
*.trp
MPEG2
*.flv
*.vob
*.svi
MPEG1
*.m2ts
*.mts
VP6
640 x 480
4
*.divx
180
Video
•• 3D video is not supported.
•• Content with a resolution larger than the
resolution specified in the table above is not
supported.
•• Video content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy video during playback.
•• Video content will not play, or not play
correctly, if there is an error in the content or
the container.
•• Some USB/digital camera devices may not be
compatible with the player.
Audio
•• Audio content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy audio during playback.
•• Video content will not play, or not play
correctly, if there is an error in the content or
the container.
•• Some USB/digital camera devices may not be
compatible with the player.
Image
•• Compatible image file format : Jpeg
•• Supported maximum resolution : 15,360 x 8,640
•• Supported image effects : 13 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear,
Stairs, Wipe, Ripple Wash, Drop Wave, Pin
Wheel, Random Blocks, Spin Fade In)
•• Supports up to WMA 10 Pro 5.1 channel. WMA
lossless audio is not supported.
•• QCELP, AMR NB/WB are not supported.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.
•• For all Video codecs except MVC, VP8, VP6:
-- Below 1280 x 720: 60 frame max
-- Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
181
Flash
Power Point
•• Compatible with Flash 10.1
•• Flash Animation
-- Compatible file format : SWF
•• Recommended resolution : 960 x 540
-- Caution
Performance comparable to Flash Player on a Windows operating
system cannot be guaranteed
Optimization is needed during content creation
•• Flash Video
-- Compatible file format : FLV
-- Video
Codec : H.264 BP
Resolution : 1920 x 1080
-- Audio
Codec : H.264 BP
-- Caution
F4V file format is not supported
•• Compatible document file formats
-- Extension : ppt, pptx
-- Version : Office 97 ~ Office 2007
•• Functions not supported
-- Animation effect
-- 3D shapes (which will be displayed in 2D)
-- Header and footer (some subitems are not supported)
-- Word Art
-- Align
A group alignment error may occur
-- Office 2007
SmartArt is not fully supported. 97 out of 115 subitems are supported.
-- Object insertion
-- Opening encrypted documents
-- Vertical text
some subitems are not supported
-- Slide notes and handout
Screen Video is not supported
182
PDF
•• Compatible document file formats
-- Extension : pdf
•• Functions not supported
-- Content less than 1 pixel not supported because of performance
degradation issue.
-- Masked Image, Tiled Image content not supported.
-- Content with Rotated Text, not supported.
-- 3D Shadow Effects not supported.
WORD
•• Compatible document file formats
-- Extension : .doc, .docx
-- Version : Office 97 ~ Office 2007
•• Functions not supported
-- Page background effect
-- Some paragraph styles
-- Word Art
-- Align
A group alignment error may occur
-- 3D shapes (which will be displayed in 2D)
-- Office 2007
SmartArt is not fully supported. 97 out of 115 subitems are supported.
-----
Charts
Half-width characters
Letter spacing
Vertical text
some subitems are not supported
-- Slide notes and handout
183
Approving a connected device from the
server
1
4
Select Lite from the menus on the left.
5
Select Unapproved from the sub-menus of Lite.
6
Select the Approve button for your device from the list of unapproved Lite devices.
Access the server you have assigned to your device.
2
Enter your ID and password to log in.
3
Select Device from the top menu bar.
184
7
Enter the information required to approve the device.
9
When the device is approved by the server, the schedule registered in the selected group will be
downloaded to the device. The schedule will run after it is downloaded.
――For further details on how to configure a schedule, refer to the <MagicInfo Lite Server user's manual>.
――If a device is deleted from the list of devices approved by the server, the device will reboot to reset its
settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
•• Device Name: Enter the device name.
•• Device Group: Select
to specify the group.
•• Location: Enter the current location of the device.
――Pressing the INFO button on the remote when a network schedule is running will display the details of
the schedule. Check that the correct device has been selected by viewing the device ID in the details.
8
Select the All menu to check that the device has been registered.
•• When connecting to the server for the first time, the time on the product is set using the GMT time
of the region where the server is installed.
•• The time on the product can be changed from the server as shown in step 3.
•• Turning the product off and then on again will restore the time setting on the product to the last
time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer to the
<MagicInfo Lite Server user's manual>.
185
2
MagicInfo Lite
Select Network schedule in the MagicInfo Lite player menu.
MagicInfo Lite player
MENUm → Support → Contents Home → MagicInfo Lite → ENTERE
――To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode on the System.
――Press the MagicInfo Lite/S button on the remote control.
Network schedule
Local schedule
Internal Auto Play
MagicInfo Lite player
Network schedule
You can view whether the server is connected (approval) in the MagicInfo Lite menu screen. To view
whether the server is connected when a Network schedule is running, press INFO on the remote.
1
Close
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
Return
Select MagicInfo Lite player in the MagicInfo Lite menu.
MagicInfo Lite
MagicInfo Lite player
Local Schedule Manager
Content manager
Close
Settings
Mode
Server
USB
Local schedule
Connected
Connected
Return
186
Local schedule
Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run
1
MagicInfo Lite player
Select Local schedule in the MagicInfo Lite player menu screen.
Run schedules created in Local Schedule Manager.
Network schedule
――This menu is disabled if there was no schedule run previously in Local Schedule Manager.
Local schedule
Internal Auto Play
Close
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
Return
――The option is enabled only when there is at least one content item, except for music files, in Internal Memory.
Internal Auto Play
1
MagicInfo Lite player
Select Internal Auto Play in the MagicInfo Lite player menu screen.
•• Play content, which has been copied to Internal Memory, in alphabetical order.
Network schedule
Local schedule
Internal Auto Play
Close
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
Return
187
――The option is enabled only when there is at least one content item, except for music files, in the "MagicInfoSlide" folder on
USB Device Auto Play
USB Storage.
――Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB device and put content in the
MagicInfo Lite player
folder.
Network schedule
1
Local schedule
Select USB Device Auto Play in the MagicInfo Lite player menu screen.
•• The content contained in the "MagicInfoSlide" folder on the USB device will play in alphabetical order.
Internal Auto Play
Close
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
•• USB Device Auto Play will automatically run if USB memory is connected when Network schedule, Local schedule or
Internal Auto Play is running.
Return
188
2
Local Schedule Manager
Select Create in the Local Schedule Manager screen.
Configure the settings for playback from Local schedule.
Local Schedule Manager
Alternatively, select and play content from internal or USB memory according to the customized
playback sequence.
Storage
Edit
No Playing Schedule
Registering a Local schedule
1
Create
Internal Memory
Delete
Run
Select Local Schedule Manager in the MagicInfo Lite menu screen.
Info
Copy
MagicInfo Lite
Close
MagicInfo Lite player
Return
Local Schedule Manager
Content manager
Close
Settings
3
Select Time to set the time you want to play content.
Create
Mode
Server
USB
Local schedule
Connected
Connected
Ti
C
12
:
--:-- am ~ --:-- pm
00
am ~
12
:
00
pm
No Item
Return
Time
Contents
--:-- am~ --:-- pm
No Items
Save
Cancel
Return
-- A maximum of 24 schedules can be created.
-- If more than one schedule is created, the start time must be different for each schedule.
(Example of an incorrect setting: 12:00 am - 12:00 am / 12:00 am - 11:00 pm)
-- Referring to the example shown below, if more than one Local schedule is assigned to a single time slot, schedule B is
executed before schedule A.
(E.g., A: 12:00 am - 12:00 am / B: 01:00 pm - 02:00 pm)
189
4
Select Contents to specify the content you want to play.
5
Select Duration.
Contents
Direction
USB
Internal Memory
No Items
Contents
Folder1
1
Menu1.jpg
2
Menu2.jpg
Duration
Menu1.jpg
00:00:05
Menu2.jpg
00:00:05
OK
Up
Cancel
Down
Deselect
Save
Duration
Cancel
Return
Return
-- A maximum of 99 content files can be selected.
Specify the sequence and time duration to play content files.
•• Changing the playing sequence
Select a content file and change the sequence using the Up or Down button.
•• Duration
Set the duration to play content.
-- Duration cannot be specified for videos.
-- Duration must be at least 5 seconds.
Press Save to save the settings.
190
6
Select Save. Select the memory space you want to save the content to.
――Ensure at least one Local schedule is registered.
Create
Time
--:-- am~ --:-- pm
Contents
Modifying a Local schedule
1
Delete
Select Local Schedule Manager in the MagicInfo Lite menu screen.
Menu1.jpg Menu2
MagicInfo Lite
--:-- am ~ --:-- pm
Save
Where--:-do you
to save?
amwant
~ --:-pm
Tim
MagicInfo Lite player
No Item
No Item
Con
Internal
Time
USB
Cancel
--:-- am~ --:-- pm
ancel
Local Schedule Manager
Content manager
--:-- am~ --:-- pm
Contents
Return
7
Close
Settings
No Items
Mode
Server
USB
Local schedule
Connected
Connected
Check that the schedule has been added to the Local Schedule Manager.
Return
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
2
Select the local schedule you want to modify.
Edit
Local Schedule Manager
Delete
All schedules
2012.01.01_1834.lsch
Internal Memory
Storage
Create
Run
No Playing Schedule
Info
Edit
Delete
Copy
Close
All schedules
2012.01.01_1834.lsch
Run
Info
Return
Copy
Close
Return
191
3
Deleting a Local schedule
Select Edit.
――Ensure at least one Local schedule is registered.
Edit
Time
12:00 am~ 12:00 pm
Contents
Menu1.jpg Menu2
Time
Contents
1
Delete
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
--:-- am~ --:-- pm
No Items
Save
MagicInfo Lite player
Cancel
Local Schedule Manager
Content manager
Time
--:-- am~ --:-- pm
Contents
Return
4
Close
Settings
No Items
Mode
Server
USB
Local schedule
Connected
Connected
Change the details of the local schedule. Next, select Save.
Return
2
Select the local schedule you want to delete.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All schedules
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
3
Next, select Delete.
192
Running a Local schedule
Stopping a Local schedule
――Ensure at least one Local schedule is registered.
――This function is enabled only when a schedule is running.
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
Selecting Stop will change the running mode from Local schedule to Network schedule.
1
Select Local Schedule Manager in the MagicInfo Lite menu screen.
MagicInfo Lite
MagicInfo Lite
MagicInfo Lite player
MagicInfo Lite player
Local Schedule Manager
Local Schedule Manager
Content manager
Close
Settings
Content manager
Close
Settings
Mode
Server
USB
Local schedule
Connected
Connected
Mode
Server
USB
Local schedule
Connected
Connected
Return
Return
2
Select the local schedule you want to run. Next, select Run.
2
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Select Stop.
Local Schedule Manager
Create
Edit
Storage
Internal Memory
Delete
[Internal Memory] 2012.01.01_1834.lsch
All schedules
2012.01.01_1834.lsch
Copy
Close
Edit
Delete
Run
Info
Create
All schedules
2012.01.01_1834.lsch
Stop
Info
Copy
Close
Return
Return
193
Viewing the details of a Local schedule
1
3
The details of the schedule will be displayed.
Select Local Schedule Manager in the MagicInfo Lite menu screen.
Information
2012.01.01_1834.lsch
MagicInfo Lite
12:00 am~12:00 pm, 2 File(s)
- Menu1.jpg Menu2.jpg
MagicInfo Lite player
Local Schedule Manager
Close
Content manager
Close
Settings
Mode
Server
USB
Local schedule
Connected
Connected
Return
Return
2
Select the local schedule you want to view the details of.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All schedules
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
194
3
Copying a Local schedule
1
Select local schedule files and press Copy.
Select Local Schedule Manager in the MagicInfo Lite menu screen.
Local Schedule Manager
Storage
MagicInfo Lite
Internal Memory
No Playing Schedule
MagicInfo Lite player
Create
Edit
Delete
All schedules
Local Schedule Manager
2012.01.01_1834.lsch
Content manager
Run
Info
Close
Settings
Copy
Close
Mode
Server
USB
Local schedule
Connected
Connected
Return
Return
2
Select a storage device where the local schedule files to copy are saved.
4
A window appears asking if you want to copy the files to the Internal Memory or USB memory
device. Select Yes to copy the files.
Local Schedule Manager
Internal Memory
Internal Memory
Storage
Create
Edit
No Pla
USB
Delete
All schedules
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
•• Internal Memory: Copy local schedules from Internal Memory to a USB memory device.
•• USB: Copy local schedules from a USB memory device to Internal Memory.
195
2
Content manager
Content manager
Copying content
1
Select the content you want to copy.
Internal Memory
Select Content manager in the MagicInfo Lite menu screen.
USB
Folder1
No Items
Menu1.jpg
Menu2.jpg
MagicInfo Lite player
MagicInfo Lite player
Copy
Local Schedule Manager
Content manager
Free Space
5549.2MB
Free Space
6227.2MB
Selected File(s) :
0.0MB (0)
Selected File(s) :
0.2MB (2)
Delete
Close
Close
Settings
Select
Mode
Server
USB
Local schedule
Connected
Connected
Return
•• If content under Internal Memory is selected: You can copy the content under Internal
Memory to USB memory.
Return
•• If content under USB is selected: You can copy the content under USB memory to Internal
Memory.
――Selecting content under Internal Memory and USB memory at the same time will disable
copying.
3
Next, select Copy.
196
2
Deleting content
1
Select Content manager in the MagicInfo Lite menu screen.
Select the content you want to delete. Next, select Delete.
•• Content under Internal Memory and USB memory can be deleted at the same time.
Content manager
MagicInfo Lite player
Internal Memory
MagicInfo Lite player
Folder1
Menu3.jpg
Local Schedule Manager
USB
Menu4.jpg
Menu1.jpg
Content manager
Menu2.jpg
Close
Settings
Copy
Mode
Server
USB
Local schedule
Connected
Connected
Return
Free Space
5549.2MB
Free Space
6227.2MB
Selected File(s) :
0.0MB (0)
Selected File(s) :
0.2MB (2)
Select
Delete
Close
Return
197
Settings
Server Network Settings
To run MagicInfo Lite, connect to a network.
Settings
Server Network Settings
Server
Default content duration
Enter the MagicInfo Lite server settings.
(E.g.: http://192.168.0.10:7001/MagicInfo/)
Content Ratio
Default content
None
•• If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.
――Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using port
Content Layout
Landscape
number 7001, check with your server administrator to find the correct port number and then change the port number.)
Schedule Name
YYYYMMDD
Image Effect
Random
Close
FTP Mode
Safely Remove USB Device
Return
-- The displayed image may differ depending on the model.
Specify the FTP operating mode.
•• Active / Passive
Default Storage
Specify the location you want to save content (downloaded from the server) to.
•• Internal Memory: Save the content to the internal memory of the product.
•• USB: Save the content to USB memory.
――If a Network Settings is running when USB memory is not connected, the default content will run.
198
Default content duration
Content Layout
Specify the duration to play content.
Change the screen orientation to landscape or portrait view.
•• Image Viewer Time, Doc viewing time, PPT Viewer Time, PDF Viewing time, Flash Viewing
time
――The duration must be at least 5 seconds.
•• Landscape / Portrait
――If Content Layout is Portrait view,it does not support VP8 video codec.
Content Ratio
Specify the display aspect ratio by type when playing content.
•• Doc Ratio, PPT Ratio, PDF Ratio, Video Ratio
-- Original: Display content with the original size.
-- Full Screen: Display content in full screen.
Image Effect
Configures the image transition effects.
•• Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe, Ripple Wash, Drop Wave, Pin
Wheel, Random Blocks, Spin Fade In, Random, None
Default content
Schedule Name
Select a schedule title format when creating a local schedule.
•• YYYYMMDD / YYYYDDMM / DDMMYYYY
Safely Remove USB Device
Safely removes USB memory
Delete all content
Delete all the content files in Internal Memory.
Reset Settings
Restore all the values under Settings to the default when the product was purchased.
Specify the content to play by default when launching MagicInfo Lite.
•• Content of up to 20MB is supported for Default content.
199
When Content is Running
Viewing the details of the content that is running
Information
Software Version
: A-LUBXGDSP-0100.18
Device Name
: Monitor
Device ID
: FF-FF-FF-FF-FF-FF
Mode
: Local schedule
Server
: Disconnected
USB
: Connected
Schedule download
: No Schedule to download
Press the INFO button on the remote control.
•• Software Version: Displays the software version of a device
•• Device Name: Displays the name of a device recognized by the server
•• Device ID: Displays the original identification number of a device
•• Mode: Displays the current operating mode
(Network schedule, Local schedule, Internal Auto Play or USB Device Auto Play) of MagicInfo Lite player
•• Server: Displays the connection status (Connected, Disconnected or Not approved) of the server
•• USB: Displays the connection status of a USB device
•• Schedule download: Displays the progress of a network schedule being downloaded from the server
Cancel
-- The displayed image may differ depending on the model.
200
Changing the settings for the content that is running
Tools
Picture Mode
Standard
Sound Mode
Standard
PIP
Off
Background Music
Off
Background Music Setting
Safely Remove USB Device
Press the TOOLS button on the remote control.
You can change the Picture Mode or Sound Mode setting or safely remove a USB device (Safely Remove USB Device) while
content is playing by pressing the TOOLS button on the remote control.
•• Picture Mode (Dynamic / Standard / Natural / Movie)
Customizes the screen settings for the content currently playing
•• Sound Mode (Standard / Music / Movie / Clear Voice / Amplify)
Customizes the audio settings for the content currently playing
•• PIP (Off / On)
Activate or deactivate the PIP function.
•• Background Music (Off / On)
Activate or deactivate the Background Music function.
Return
•• Background Music Setting (Shuffle / Play / Cancel / Deselect)
Set music files saved in the Internal Memory as Background Music.
――To enable the Background Music Setting, make sure at least one MP3 file is saved in Internal Memory.
-- The displayed image may differ depending on the model.
•• Safely Remove USB Device
Safely removes USB memory
201
Chapter 12
MagicInfo Premium S
-- To launch MagicInfo Premium S, select
MagicInfo Premium S for the Play
Mode on the System.
A Licence needs to be purchased to use MagicInfo Premium S.
To download the software, go to the Samsung homepage at http://www.samsunglfd.com.
To purchase a licence, contact a Customer Server Centre.
File Formats Compatible with MagicInfo Premium S Player
Read before using MagicInfo Premium S Player
•• The file system supports FAT16, FAT32 and NTFS.
•• A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played.
Check the vertical and horizontal resolution of the file.
•• Check the supported video and audio Codec types and Versions.
•• Check the supported file versions.
-- Flash version up to 10.1 is supported
-- PowerPoint version up to 97 – 2007 is supported
•• Only the last USB device that was connected is recognized.
――See page 180 for further details on supported codecs.
202
Video
•• 3D video is not supported.
•• Content with a resolution larger than the
resolution specified in the table above is not
supported.
•• Video content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy video during playback.
•• Video content will not play, or not play
correctly, if there is an error in the content or
the container.
•• Some USB/digital camera devices may not be
compatible with the player.
Audio
•• Audio content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy audio during playback.
•• Video content will not play, or not play
correctly, if there is an error in the content or
the container.
Image
•• Compatible image file format : Jpeg
•• Supported maximum resolution : 15,360 x 8,640
•• Supported image effects : 8 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear,
Stairs, Wipe)
•• Some USB/digital camera devices may not be
compatible with the player.
•• Supports up to WMA 10 Pro 5.1 channel. WMA
lossless audio is not supported.
•• QCELP, AMR NB/WB are not supported.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.
•• For all Video codecs except MVC, VP8, VP6:
-- Below 1280 x 720: 60 frame max
-- Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
•• The product may not support some codecs
when in dual playback mode, playing two
different video files.
203
Flash
Power Point
•• Compatible with Flash 10.1
•• Flash Animation
-- Compatible file format : SWF
•• Recommended resolution : 960 x 540
-- Caution
Performance comparable to Flash Player
on a Windows operating system cannot be
guaranteed
Optimization is needed during content
creation
•• Flash Video
-- Compatible file format : FLV
-- Video
Codec : H.264 BP
Resolution : 1920 x 1080
-- Audio
Codec : H.264 BP
-- Caution
F4V file format is not supported
Screen Video is not supported
•• Compatible document file formats
-- Extension : ppt, pptx
-- Version : Office 97 ~ Office 2007
•• Functions not supported
-- Animation effect
-- 3D shapes (which will be displayed in 2D)
-- Header and footer (some subitems are not
supported)
-- Word Art
-- Align
A group alignment error may occur
PDF
•• Compatible document file formats
-- Extension : pdf
•• Functions not supported
-- Content less than 1 pixel not supported
because of performance degradation issue.
-- Masked Image, Tiled Image content not
supported.
-- Content with Rotated Text, not supported.
-- 3D Shadow Effects not supported.
-- Some characters not supported
(Special characters may be corrupted)
-- Office 2007
SmartArt is not fully supported. 97 out of
115 subitems are supported.
------
Object insertion
Half-width characters
Letter spacing
Charts
Vertical text
some subitems are not supported
-- Slide notes and handout
204
WORD
Template files
•• Compatible document file formats
-- Extension : .doc, .docx
-- Version : Office 97 ~ Office 2007
•• Functions not supported
-- Page background effect
-- Some paragraph styles
-- Word Art
-- Align
A group alignment error may occur
•• Creation/editing/playback are only available in
Template Manager.
LFD
•• Supported in USB Device Auto Play and
Network schedule (Authored in a PC
authoring tool for Premium S Player)
•• Compatible document file formats
-- Extension : .lfd
-- 3D shapes (which will be displayed in 2D)
-- Office 2007
SmartArt is not fully supported. 97 out of
115 subitems are supported.
-----
Charts
Half-width characters
Letter spacing
Vertical text
some subitems are not supported
-- Slide notes and handout
205
Network Schedule Multiframe
Playback restrictions
•• A maximum of two video (Videos) files can be played.
•• If PIP mode is enabled, more than one video (Videos) file cannot be played.
•• More than one Flash file cannot be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•• LFD(.lfd) files are not supported.
Sound output restrictions
•• More than one sound output cannot be used.
•• Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected by the user
――Network BGM: Settings can be configured in step 1 when creating a server schedule.
――Local BGM: BGM settings can be configured using the tools displayed after the TOOLS button is pressed during MagicInfo Premium S playback.
――User-selected main frame: Main frame settings can be configured in step 2 when creating a server schedule.
Template files and LFD(.lfd) files
Restrictions
•• Scenarios created in a PC authoring tool that were published to a USB device are not supported.
•• Scenarios created in a PC authoring tool that were published along with schedule details to a USB device are not supported.
•• Playback is only possible via USB Device Auto Play.
An .lfd file must exist under the MagicInfoSlide folder on the USB device.
206
Playback restrictions
•• A maximum of two video (Videos) files can be played.
•• If PIP mode is enabled, more than one video (Videos) file cannot be played.
•• More than one Flash file cannot be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•• Multiple videos (Videos) cannot be played on a single display of a video wall simultaneously.
•• More than one PIP content file cannot be played.
Sound output restrictions
•• More than one sound output cannot be used.
•• Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected by the user
――User-selected main frame: Sound output can be selected in step 3 while authoring in Template Manager
Others
Flash performance can be slower on a PC (H/W performance restrictions)
PIP function restrictions
•• PIP function is not available during Flash playback.
•• Not supported if the content layout is Portrait. (Note that PIP is supported when configured in Template Manager and applied to an .lfd file.)
•• PIP configured in Template Manager or applied to an .lfd file and PIP configured on the product cannot be used simultaneously.
•• PIP is always in Landscape mode if configured in Template Manager or applied to an .lfd file.
(Note that the display cannot be rotated when the content layout is Portrait.)
207
Approving a connected device from the
server
1
4
Select Premium from the menus on the left.
5
Select Unapproved from the sub-menus of Premium.
6
Select the Approve button for your device from the list of unapproved Premium devices.
Access the server you have assigned to your device.
2
Enter your ID and password to log in.
3
Select Device from the top menu bar.
208
7
Enter the information required to approve the device.
9
When the device is approved by the server, the schedule registered in the selected group will be
downloaded to the device. The schedule will run after it is downloaded.
――For further details on how to configure a schedule, refer to the <MagicInfo Premium Server user's
manual>.
――If a device is deleted from the list of devices approved by the server, the device will reboot to reset its
settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
•• Device Name: Enter the device name.
•• Device Group: Select
to specify the group.
•• Location: Enter the current location of the device.
――Pressing the INFO button on the remote when a network schedule is running will display the details
of the schedule. Check that the correct device has been selected by viewing the device ID in the
details.
8
Select the All menu to check that the device has been registered.
•• When connecting to the server for the first time, the time on the product is set using the GMT time
of the region where the server is installed.
•• The time on the product can be changed from the server as shown in step 3.
•• Turning the product off and then on again will restore the time setting on the product to the last
time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer to the
<MagicInfo Premium Server user's manual>.
209
MagicInfo Premium S
2
Select Network schedule in the MagicInfo Premium S Player menu.
MagicInfo Premium S Player
T Contents Home MagicInfo Premium S ENTER E
MENUm :
Support
――To launch MagicInfo Premium S, select MagicInfo Premium S for the Play Mode on the System.
――Press the MagicInfo Lite/S button on the remote control.
Network schedule
Local schedule
Template Player
MagicInfo Premium S Player
Network schedule
You can view whether the server is connected (approval) in the MagicInfo Premium S menu screen.
To view whether the server is connected when a Network schedule is running, press INFO on the
remote.
1
Close
Internal Auto Play
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
Return
Select MagicInfo Premium S Player in the MagicInfo Premium S menu.
MagicInfo Premium S
MagicInfo Premium S Player
Local Schedule Manager
Template Manager
Close
Content manager
Settings
Mode
Server
USB
Local schedule
Connected
Connected
Return
210
Local schedule
Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run
1
MagicInfo Premium S Player
Select Local schedule in the MagicInfo Premium S Player menu screen.
Run schedules created in Local Schedule Manager.
Network schedule
――This menu is disabled if there was no schedule run previously in Local Schedule Manager.
Local schedule
Template Player
Close
Internal Auto Play
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
Return
Template Player
Go to Template Manager → Click Create to create a template → Select the template you want to run
1
MagicInfo Premium S Player
Select Template Player in the MagicInfo Premium S Player menu screen.
Run templates created in Template Manager.
Network schedule
――This menu is disabled if there was no schedule run previously in Local Schedule Manager.
Local schedule
Template Player
Internal Auto Play
Close
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
Return
211
――The option is enabled only when there is at least one content item, except for music files, in Internal Memory.
Internal Auto Play
1
MagicInfo Premium S Player
Select Internal Auto Play in the MagicInfo Premium S Player menu screen.
•• Play content, which has been copied to Internal Memory, in alphabetical order.
Network schedule
Local schedule
Template Player
Close
Internal Auto Play
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
Return
――The option is enabled only when there is at least one content item, except for music files, in the "MagicInfoSlide" folder on
USB Device Auto Play
USB Storage.
――Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB device and put content in the
MagicInfo Premium S Player
folder.
Network schedule
1
Local schedule
Template Player
Select USB Device Auto Play in the MagicInfo Premium S Player menu screen.
•• The content contained in the "MagicInfoSlide" folder on the USB device will play in alphabetical order.
Close
Internal Auto Play
USB Device Auto Play
Mode
Server
USB
Local schedule
Connected
Connected
•• USB Device Auto Play will automatically run if USB memory is connected when Network schedule, Local schedule or
Internal Auto Play is running.
Return
212
2
Local Schedule Manager
Select Create in the Local Schedule Manager screen.
Configure the settings for playback from Local schedule.
Local Schedule Manager
Alternatively, select and play content from internal or USB memory according to the customized
playback sequence.
Storage
Edit
No Playing Schedule
Registering a Local schedule
1
Create
Internal Memory
Delete
Run
Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Info
Copy
MagicInfo Premium S
Close
MagicInfo Premium S Player
Return
Local Schedule Manager
Template Player
Close
Content manager
3
Select Time to set the time you want to play content.
Settings
Create
Mode
Server
USB
Local schedule
Connected
Connected
Ti
C
12
:
--:-- am ~ --:-- pm
00
am ~
12
:
00
pm
No Item
Return
Time
Contents
--:-- am~ --:-- pm
No Items
Save
Cancel
Return
-- A maximum of 24 schedules can be created.
-- If more than one schedule is created, the start time must be different for each schedule.
(Example of an incorrect setting: 12:00 am - 12:00 am / 12:00 am - 11:00 pm)
-- Referring to the example shown below, if more than one Local schedule is assigned to a single time slot, schedule B is
executed before schedule A.
(E.g., A: 12:00 am - 12:00 am / B: 01:00 pm - 02:00 pm)
213
4
Select Contents to specify the content you want to play.
5
Select Duration.
Contents
Direction
USB
Internal Memory
No Items
Contents
Folder1
1
Menu1.jpg
2
Menu2.jpg
Duration
Menu1.jpg
00:00:05
Menu2.jpg
00:00:05
OK
Up
Cancel
Down
Deselect
Save
Duration
Cancel
Return
Return
-- A maximum of 99 content files can be selected.
Specify the sequence and time duration to play content files.
•• Changing the playing sequence
Select a content file and change the sequence using the Up or Down button.
•• Duration
Set the duration to play content.
-- Duration cannot be specified for videos.
-- Duration must be at least 5 seconds.
Press Save to save the settings.
214
6
Select Save. Select the memory space you want to save the content to.
――Ensure at least one Local schedule is registered.
Create
Time
--:-- am~ --:-- pm
Contents
Modifying a Local schedule
1
Delete
Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Menu1.jpg Menu2
MagicInfo Premium S
--:-- am ~ --:-- pm
Save
Where--:-do you
to save?
amwant
~ --:-pm
Tim
MagicInfo Premium S Player
No Item
No Item
Con
Internal
Time
USB
Cancel
--:-- am~ --:-- pm
ancel
Local Schedule Manager
Template Player
--:-- am~ --:-- pm
Contents
Close
Content manager
No Items
Settings
Return
7
Mode
Server
USB
Local schedule
Connected
Connected
Check that the schedule has been added to the Local Schedule Manager.
Return
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
2
Select the local schedule you want to modify.
Edit
Local Schedule Manager
Delete
2012.01.01_1834.lsch
Internal Memory
Storage
All schedules
Run
No Playing Schedule
Info
Create
Edit
Delete
Copy
All schedules
Close
2012.01.01_1834.lsch
Run
Info
Copy
Return
Close
Return
215
3
Deleting a Local schedule
Select Edit.
――Ensure at least one Local schedule is registered.
Edit
Time
12:00 am~ 12:00 pm
Contents
Menu1.jpg Menu2
1
Delete
Select Local Schedule Manager in the MagicInfo Premium S menu screen.
MagicInfo Premium S
Time
Contents
Time
--:-- am~ --:-- pm
No Items
Save
MagicInfo Premium S Player
Cancel
Local Schedule Manager
Template Player
--:-- am~ --:-- pm
Contents
Close
Content manager
No Items
Settings
Return
4
Mode
Server
USB
Local schedule
Connected
Connected
Change the details of the local schedule. Next, select Save.
Return
2
Select the local schedule you want to delete.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All schedules
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
3
Next, select Delete.
216
Running a Local schedule
Stopping a Local schedule
――Ensure at least one Local schedule is registered.
――This function is enabled only when a schedule is running.
1
Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Selecting Stop will change the running mode from Local schedule to Network schedule.
1
Select Local Schedule Manager in the MagicInfo Premium S menu screen.
MagicInfo Premium S
MagicInfo Premium S
MagicInfo Premium S Player
MagicInfo Premium S Player
Local Schedule Manager
Local Schedule Manager
Template Player
Close
Content manager
Template Player
Close
Content manager
Settings
Mode
Server
USB
Local schedule
Connected
Connected
Settings
Mode
Server
USB
Local schedule
Connected
Connected
Return
Return
2
Select the local schedule you want to run. Next, select Run.
2
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Select Stop.
Local Schedule Manager
Create
Edit
Storage
Internal Memory
Delete
[Internal Memory] 2012.01.01_1834.lsch
All schedules
2012.01.01_1834.lsch
Create
Edit
Delete
Run
All schedules
Info
2012.01.01_1834.lsch
Copy
Close
Stop
Info
Copy
Close
Return
Return
217
Viewing the details of a Local schedule
1
3
The details of the schedule will be displayed.
Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Information
2012.01.01_1834.lsch
MagicInfo Premium S
12:00 am~12:00 pm, 2 File(s)
- Menu1.jpg Menu2.jpg
MagicInfo Premium S Player
Local Schedule Manager
Close
Template Player
Close
Content manager
Settings
Mode
Server
USB
Local schedule
Connected
Connected
Return
Return
2
Select the local schedule you want to view the details of.
Local Schedule Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Delete
All schedules
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
218
3
Copying a Local schedule
1
Select local schedule files and press Copy.
Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Local Schedule Manager
Storage
MagicInfo Premium S
Internal Memory
No Playing Schedule
Edit
Delete
MagicInfo Premium S Player
All schedules
Local Schedule Manager
2012.01.01_1834.lsch
Template Player
Run
Info
Close
Content manager
Copy
Settings
Close
Mode
Server
USB
Local schedule
Connected
Connected
Return
Return
2
Create
4
A window appears asking if you want to copy the files to the Internal Memory or USB memory
device. Select Yes to copy the files.
Select a storage device where the local schedule files to copy are saved.
Local Schedule Manager
Internal Memory
Internal Memory
Storage
Create
Edit
No Pla
USB
Delete
All schedules
2012.01.01_1834.lsch
Run
Info
Copy
Close
Return
•• Internal Memory: Copy local schedules from Internal Memory to a USB memory device.
•• USB: Copy local schedules from a USB memory device to Internal Memory.
219
2
Template Manager
Select Create in the Template Manager screen.
Template Manager
Registering a Template
1
Storage
Select Template Manager in the MagicInfo Premium S menu screen.
Internal Memory
No Playing Schedule
Create
Edit
Copy
MagicInfo Premium S
Delete
Play
MagicInfo Premium S Player
Preview
Local Schedule Manager
Close
Template Manager
Close
Content manager
Return
Settings
Mode
Server
USB
Local schedule
Connected
Connected
3
Return
Select a template in Landscape or Portrait mode.
Create
Select a template.
Landscape
Portrait
Next
Cancel
――Interlaced signal rotation is not supported.
220
4
Organize a template by inserting text, video, photo, or PDF files as desired.
Contents
Contents
Create
Type
Select the position and the background.
None
Contents
Use background image
Preview
No Items
Size
Fit to screen
Source
PC
Previous
Next
OK
Cancel
Return
Cancel
•• Type: Select a file type to use to organize a template.
-- None / PIP / Videos / Image / Flash / Office / PDF
•• Contents: Select a file saved in Internal Memory or a USB device.
-- To load a file or manually enter text, select Text input.
•• Size: Specify the screen size when displaying a content file on the template page.
-- Fit to screen / Lock Aspect Ratio
•• Source: This option is enabled when Type is set to PIP.
-- Component / AV / PC / DVI / HDMI
――A template can contain a maximum of two Videos files.
――A template can contain only one PIP file.
(If a PIP file is selected, only one Videos file can be selected.)
――An Office file and a PDF file cannot be contained in the same template.
――A template cannot contain more than one Flash file.
221
5
6
Select sound or background music.
Select Save. Select the memory space you want to save the content to.
Create
Create
Select sound or background music.
Save the template and finish.
Internal
Storage
Background Music
Template Name
Preview
20130101_2222
Preview
Previous
Previous
Next
OK
Cancel
Cancel
•• If two Videos files are assigned, select the file with the sound you want to use.
-- If one of the video files includes PIP content, sound from the PIP content can be selected.
7
Check that the template has been added to the Template Manager.
•• If a Flash file is selected, it is not possible to enable the sound output from another file or the
background music. (Step 5 is skipped.)
•• If Background Music is enabled, the sound settings function in a file is not supported.
Template Manager
Storage
Internal Memory
No Playing Schedule
Create
Edit
Copy
All schedules
Delete
20130101_2222.tlfd
Run
Preview
Close
Return
222
2
Content manager
Content manager
Copying content
1
Select the content you want to copy.
Internal Memory
Select Content manager in the MagicInfo Premium S menu screen.
USB
Folder1
No Items
Menu1.jpg
Menu2.jpg
MagicInfo Premium S
MagicInfo Premium S Player
Copy
Local Schedule Manager
Template Manager
Content manager
Free Space
5549.2MB
Free Space
6227.2MB
Selected File(s) :
0.0MB (0)
Selected File(s) :
0.2MB (2)
Delete
Close
Close
Settings
Select
Mode
Server
USB
Local schedule
Connected
Connected
Return
•• If content under Internal Memory is selected: You can copy the content under Internal
Memory to USB memory.
Return
•• If content under USB is selected: You can copy the content under USB memory to Internal
Memory.
――Selecting content under Internal Memory and USB memory at the same time will disable
copying.
3
Next, select Copy.
223
2
Deleting content
1
Select Content manager in the MagicInfo Premium S menu screen.
Select the content you want to delete. Next, select Delete.
•• Content under Internal Memory and USB memory can be deleted at the same time.
Content manager
MagicInfo Premium S
Internal Memory
MagicInfo Premium S Player
Folder1
Menu3.jpg
Local Schedule Manager
USB
Menu4.jpg
Menu1.jpg
Template Manager
Menu2.jpg
Content manager
Close
Settings
Copy
Mode
Server
USB
Local schedule
Connected
Connected
Return
Free Space
5549.2MB
Free Space
6227.2MB
Selected File(s) :
0.0MB (0)
Selected File(s) :
0.2MB (2)
Select
Delete
Close
Return
224
Server Network Settings
Settings
To run MagicInfo Premium S, connect to a network.
Settings
Server
Server Network Settings
Enter the MagicInfo Premium S server settings.
Default content duration
•• If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.
――Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using port
Content Ratio
Copy Deployed Folders
Image Effect
Manual
Close
Random
Default content
None
Content Layout
Landscape
Schedule Name
YYYYMMDD
number 7001, check with your server administrator to find the correct port number and then change the port number.)
FTP Mode
Specify the FTP operating mode.
•• Active / Passive
Return
Default Storage
Specify the location you want to save content (downloaded from the server) to.
-- The displayed image may differ depending on the model.
•• Internal Memory: Save the content to the internal memory of the product.
•• USB: Save the content to USB memory.
――If a Network schedule is running when USB memory is not connected, the default content will run.
225
Default content duration
Content Layout
Specify the duration to play content.
Change the screen orientation to landscape or portrait view.
•• Image Viewer Time, Template Display Duration, Doc viewing time, PPT Viewer Time, PDF
Viewing time, Flash Viewing time
――The duration must be at least 5 seconds.
•• Landscape / Portrait
――If Content Layout is Portrait view,it does not support VP8 video codec.
Content Ratio
Specify the display aspect ratio by type when playing content.
•• Image ratio, Doc Ratio, PPT Ratio, PDF Ratio, Video Ratio
-- Original: Display content with the original size.
-- Full Screen: Display content in full screen.
Copy Deployed Folders
•• Manual / Auto
Image Effect
Configures the image transition effects.
•• Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe, Random, None
Schedule Name
Select a schedule title format when creating a local schedule.
•• YYYYMMDD / YYYYDDMM / DDMMYYYY
Safely Remove USB Device
Safely removes USB memory
Delete all content
Delete all the content files in Internal Memory.
Reset Settings
Restore all the values under Settings to the default when the product was purchased.
Default content
Specify the content to play by default when launching MagicInfo Premium S.
•• Content of up to 20MB is supported for Default content.
226
When Content is Running
Viewing the details of the content that is running
Information
Software Version
: A-LUBXGDSP-0100.18
Device Name
: Monitor
Device ID
: FF-FF-FF-FF-FF-FF
Mode
: Local schedule
Server
: Disconnected
USB
: Connected
Schedule download
: No Schedule to download
Press the INFO button on the remote control.
•• Software Version: Displays the software version of a device
•• Device Name: Displays the name of a device recognized by the server
•• Device ID: Displays the original identification number of a device
•• Mode: Displays the current operating mode
(Network schedule, Local schedule, Template Player, Internal Auto Play or USB Device Auto Play) of MagicInfo
Premium S Player
•• Server: Displays the connection status (Connected, Disconnected or Not approved) of the server
•• USB: Displays the connection status of a USB device
•• Schedule download: Displays the progress of a network schedule being downloaded from the server
Cancel
-- The displayed image may differ depending on the model.
227
Changing the settings for the content that is running
Press the TOOLS button on the remote control.
You can change the Picture Mode or Sound Mode setting or safely remove a USB device (Safely Remove USB Device) while
content is playing by pressing the TOOLS button on the remote control.
Tools
Picture Mode
Standard
Sound Mode
Standard
PIP
Off
Background Music
Off
Background Music Setting
Safely Remove USB Device
•• Picture Mode (Dynamic / Standard / Natural / Movie)
Customizes the screen settings for the content currently playing
•• Sound Mode (Standard / Music / Movie / Clear Voice / Amplify)
Customizes the audio settings for the content currently playing
•• PIP (Off / On)
Activate or deactivate the PIP function.
•• Background Music (Off / On)
Activate or deactivate the Background Music function.
Return
•• Background Music Setting (Shuffle / Play / Cancel / Deselect)
Set music files saved in the Internal Memory as Background Music.
――To enable the Background Music Setting, make sure at least one MP3 file is saved in Internal Memory.
-- The displayed image may differ depending on the model.
•• Safely Remove USB Device
Safely removes USB memory
228
Chapter 13
MagicInfo Videowall S
-- To launch MagicInfo Videowall S,
select MagicInfo Videowall S for the
Play Mode on the System.
A licence needs to be purchased to use MagicInfo Videowall S.
To download the software, go to the Samsung homepage at http://www.samsunglfd.com.
To purchase a licence, contact a Customer Server Centre.
File Formats Compatible with MagicInfo Videowall S Player
Read before using MagicInfo Videowall S Player
MagicInfo Videowall S can only configure and control content files via VideoWall Console.
•• Refer to the VideoWall Console user manual for further details.
•• To display the menu selection window, press RETURN on the remote control.
――See page 180 for further details on supported codecs.
229
Video
Image
•• 3D video is not supported.
•• Compatible image file format : Jpeg, bmp, png
•• Content with a resolution larger than the resolution specified in the table
above is not supported.
•• Supported maximum resolution : 15,360 x 8,640
-- A higher resolution image may take longer to display on the screen.
•• Video content with a Bit rate or Frame rate larger than the rate specified in
the table above can cause choppy video during playback.
•• Video content will not play, or not play correctly, if there is an error in the
content or the container.
•• Some USB/digital camera devices may not be compatible with the player.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
•• For all Video codecs except MVC, VP8, VP6:
-- Below 1280 x 720: 60 frame max
-- Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
230
Restrictions
•• Only one video (Videos) file can be played per client.
――Different content files can be played on the displays of a video wall.
Two video (Videos) files cannot be played on a single display of a video wall.
Available
Available
Not available
231
MagicInfo Videowall S
MENUm → Support → Contents Home → MagicInfo Videowall S →
ENTERE → RETURN
――To launch MagicInfo Videowall S, select MagicInfo Videowall S for the Play
Mode on the System.
――Press the MagicInfo Lite/S button on the remote control.
Settings
Default Storage
Specify the location you want to save content (downloaded from the server) to.
•• Internal Memory: Save the content to the internal memory of the product.
•• External: Save the content to USB memory.
Default content
Configure the settings for the content that will play by default.
Content Layout
Change the screen orientation to landscape or portrait view.
Settings
Default Storage
Internal Memory
Default content
None
Content Layout
Landscape
Port
51001
•• Landscape / Portrait
――If Content Layout is Portrait view,it does not support VP8 video codec.
Port
Close
Safely Remove USB Device
View the port number of the server. Use 51001 as the port number.
•• If unable to connect to the server using port number 51001, check with your server administrator to find the correct port
number and then change the port number.
Reset
Safely Remove USB Device
Return
Safely removes USB memory
Reset
-- The displayed image may differ depending on the model.
Restore all the values under Settings to the default when the product was purchased.
232
When Content is Running
Information
Software Version
: A-LUBXGDSP-0100.18
Device Name
: Monitor
Device ID
: FF-FF-FF-FF-FF-FF
USB
: Connected
Press the INFO button on the remote control.
•• Software Version: Displays the software version of a device
•• Device Name: Displays the name of a device recognized by the server
•• Device ID: Displays the original identification number of a device
•• USB: Displays the connection status of a USB device
Cancel
-- The displayed image may differ depending on the model.
233
Chapter 14
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Centre
Before calling Samsung Customer Service
Centre, test your product as follows. If
the problem persists, contact Samsung
Customer Service Centre.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
If the screen remains blank, check the PC
system, video controller and cable.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
234
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
PC is shown in Source when a PC is not connected.
PC is always shown in Source irrespective of whether or not a PC is connected.
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen (refer to "Connecting to
a PC").
Check that the product is connected correctly with a cable
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's maximum
resolution and frequency.
Check that the device connected to the product is powered on.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to
the product specifications.
The images on the screen look distorted.
Check the cable connection to the product
235
Screen issue
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range compatible
with the product. Then, change the screen settings if required by referring to the Additional
Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen colour is inconsistent.
Go to Picture and adjust the Colour Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
Press any key on the keyboard or move the mouse to return to the previous screen.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after 10 to 15
minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
236
Screen issue
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast moving
objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean
the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital products.
The brightness and colour do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Colour, Brightness and
Sharpness.
――Refer to page 99 for details about the Picture menu.
Go to System and adjust the Energy Saving settings.
――Refer to page 138 for details about the System menu.
Reset the screen settings to the default settings.
――Refer to page 114 for details about the Reset Picture menu.
Broken lines are displayed on the edges of the screen.
If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a
Samsung Service Centre to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or if the
signal is not stable. To resolve the issue, change the PC resolution to the recommended resolution.
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and bottom of
the screen.
Change the screen size setting to full screen on the product or source device.
237
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software programme.
Video is available but there is no sound.
If an HDMI cable is connected, check the audio output settings on the PC.
Go to Sound and change Speaker Select to Internal.
If a source device is used
•• Make sure the audio cable is properly connected to the audio input port on the product.
•• Check the audio output settings for the source device.
(For example, if an HDMI cable is connected to the monitor, the audio setting for the cable box
may need to be changed to HDMI.)
If a DVI-HDMI cable is used, a separate audio cable is required.
If the product has a headphone port, make sure nothing is connected to it.
Reconnect the power cable to the device and then reboot the device.
There is static coming from the speakers.
Check the cable connection. Make sure a video cable is not connected to an audio input port.
Check the signal strength after connecting a cable.
Low signal level can cause corrupted sound.
238
Sound issue
There is audible sound when the volume is muted.
When Speaker Select is set to External, the volume button and mute function are disabled.
Adjust the volume for the external speakers.
Audio settings for main speakers are separate from the internal speakers on the product.
Changing or muting the volume on the product does not affect an external amplifier(decoder).
Sound from the monitor does not change after Sound Mode
is changed.
Audio settings for main speakers are separate from the internal speakers on the product.
There is an echo sound coming from the speakers.
Different decoding speeds between the product speakers and external speakers can cause an echo.
Audio settings on a source device do not affect the internal speaker settings on the product.
In this case, set Speaker Select to External.
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
239
Intel® WiDi connection issue
Unable to establish a WiDi connection.
It is recommended using the laptop within a 3m radius of the product.
You may encounter a connection failure or scrambled screen in a multiple router environment such as
an office. Since WiDi is used to handle real-time streaming, you may encounter a scrambled signal in
the case of electric interference.
Check if there may be electric interference around the product and relocate the product as far as
possible from such a location i.e. a transmission tower, microwave oven or other electromagnetic
generating environment.)
WiDi is not displayed in the Source list after initial power on.
It takes about 20 seconds to authorize the wireless connection of the external/internal WiFi module.
Please wait a moment.
If the problem persists, this is caused by a defective wireless module or the incorrect wiring of the
cables between the modules.
A scrambled screen occurs at regular intervals.
The product may be affected by the surrounding radio signals. Do not place objects that can cause
electric interference between the product and the PC/laptop computer.
•• If the product is too close to the laptop computer, the WiDi performance may be deteriorated. It
is recommended maintaining the recommended distance between them.
•• A microwave oven and vacuum cleaner can cause electric interference with a WiDi signal.
Therefore, stop operating these devices when using the WiDi feature.
•• A transmission tower, microwave oven or other electromagnetic generating device can cause a
scrambled screen. Keep the product away from such devices as much as possible.
Can I update the software driver while in WiDi mode?
If you update or delete the wireless/graphic software driver while using WiDi to wirelessly connect
between the product and the laptop computer, the WiDi adapter will be disconnected leading to a
system failure.
Remove the WiDi connection before updating the software driver.
If the adapter is disconnected, no sound will be output from
the programme.
Exit the programme and adjust the volume of the laptop computer manually.
240
Intel® WiDi connection issue
If you change the WiDi-based wireless LAN settings, you
may encounter a temporary scrambled or disconnected
adapter.
Do not change the wireless LAN settings while in WiDi mode.
If the product is too far away from the laptop computer,
the playback performance of the product will deteriorate
accordingly.
It is recommended maintaining the ideal distance between them.
How can I access the extended video feature in WiDi mode?
If the product supports 1080p HD video but your laptop computer does not, you can still play a 1080p
HD video on the product. To take advantage of the extended video (1080p HD) feature in WiDi mode,
follow the steps below:
1
Use the Windows key + P key combination on the keyboard to select Extend. This will switch the
mode to Extended Desktop mode.
2
Change the screen resolution to 1920 x 1080 for the extended desktop mode.
3
Move the video player to the extended desktop screen.
4
Maximize the video player screen before playing the 1080p video source.
In WiDi mode, the mouse pointer seems to move slowly.
Since WiDi will have a 0.3 second delay in processing the signal, you may encounter a slower reaction
of the keyboard and the mouse. In a mode that requires a faster reaction such as a PC game, use a
wired connection such as PC/HDMI mode rather than WiDi.
I want to change the size of the WiDi screen.
In WiDi mode, only the original size of the video source is supported.
How can I obtain the WiDi software driver?
Consult with the manufacturer of your laptop computer. The software driver downloaded from the
Intel ® homepage may not work properly. For more information about the specifications, the latest
software driver and other related tools, contact the manufacturer of your laptop computer.
241
Intel® WiDi connection issue
When I change the screen resolution, I experience
temporary interference on the screen.
If you change the screen resolution in WiDi mode, you may encounter temporary interference on the
screen.
I cannot resize the video screen on the product with the
WiDi programme on my laptop computer.
The resizing menu of the WiDi programme is only enabled with a separate external WiDi adapter. The
product is not compliant with the adapter.
I have searched for available WiDi adapters on my laptop
but cannot establish a connection.
WiDi can be greatly affected by the wireless communications environment. This is why you may
encounter a connection failure from time to time. Please try again in a moment.
The full HD (1920 X 1080) video displays blurry characters.
WiDi by its nature, displays the video in a downsized resolution. To improve the sharpness, contact the
manufacturer of your laptop computer for the latest software driver.
Other issue
The product smells like plastic.
The plastic smell is normal and disappears over time.
The monitor appears tilted.
Remove and then attach the stand again to the product.
Audio or video cuts out intermittently.
Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video files.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a wall, it
is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
The PIP menu is not available.
The menu is enabled or disabled depending on the Source mode.
――Refer to page 140 for details about the PIP menu.
When I try to change the PC resolution, a message "The
defined resolution is not supported." appears.
The message "The defined resolution is not supported." appears if the input source resolution
exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
242
Other issue
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
DVI cables do not transmit sound data.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is connected to the
product via an HDMI (RGB signal) cable.
There is no sound in HDMI mode.
Displayed picture colours may not look normal. Video or sound may not be available. This can occur if
a source device that only supports an older version of the HDMI standard is connected to the product.
Make sure to connect the audio cable to the correct input jack to enable audio.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognize HDMI signals that do not include sound. In
this case, manually select a sound input.
The IR sensor is not functioning.
Sound input
Screen mode
PC
Auto
PC settings
DVI PC
Audio In(Stereo ports)
PC settings
Make sure the sensor light turns on when a button is pressed on the remote control.
•• If the sensor light does not turn on, turn the power switch off and then on again on the back of
the product.
(The power LED lights up red when the screen is switched off.)
If the sensor light still does not turn on after the power switch is turned off and then on again, an
internal jack may be disconnected.
Contact your nearest service centre to have the product serviced.
•• If the sensor light that is on does not flash red when a button is pressed on the remote control,
the IR sensor may be defective.
Contact your nearest service centre to have the product serviced.
•• If there is no change on the screen when a button is pressed on the remote control although the
sensor light flashes red, the mainboard may be defective.
Contact your nearest service centre to have the product serviced.
243
Other issue
In power-saving mode, when the input source is DisplayPort,
PC display settings cannot be saved.
Go to System → General and set Max. Power Saving to Off. Alternatively, configure the PC display
output settings again. Ensure the set is turned on.
When booting the PC with the input source set to
DisplayPort, the BIOS and booting screens do not appear.
Boot the PC when the set is turned on or when the input source is not DisplayPort.
244
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor and
adjust the frequency in Monitor Settings.
Refer to the user manual for your PC or
graphics card for further instructions on
adjustment.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
resolution → Advanced Settings → Monitor and adjust the frequency in Monitor Settings.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust resolution → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and
adjust the resolution.
•• Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
Resolution and adjust the resolution.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust Resolution and adjust the resolution.
245
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display
→ Screen Saver Settings or BIOS SETUP on the PC.
•• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver
Settings or BIOS SETUP on the PC.
•• Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization
→ Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization →
Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings → Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
246
Chapter 15
Specifications
1
General
Size
Model Name
Panel
2
Size
65 Class (64.5 inches / 163 cm)
Display area
1428.48 mm (H) x 803.52 mm (V)
56.2 inches (H) x 31.6 inches (V)
Display area
H
V
3
MD65C
Dimensions (W x H x D)
1467.4 x 848.0 x 56.2 mm / 57.8 x 33.4 x 2.2 inches
Weight (without stand)
27.4 kg / 60.4 Ibs
VESA
400 mm × 400 mm / 15.7 inches × 15.7 inches
Display Colour
10bit(Dithering), 1.07B
Synchronization
Dimensions (W x H x D)
D
Horizontal
Frequency
30 ~ 81 kHz
Vertical
Frequency
48 ~ 75 Hz
H
W
247
Model Name
Resolution
MD65C
Optimum
resolution
1920 x 1080 @ 60 Hz
Maximum
resolution
1920 x 1080 @ 60 Hz
Maximum Pixel Clock
148.5 MHz (Analogue, Digital)
Audio Output
10 W X 2
Power Supply
This product uses 100 to 240V. Refer to the label at the back of the product as the standard voltage can vary in different countries.
USB
1 DOWN
Signal connectors
Environmental
considerations
Input
Optional Tuner(ATV/DTV) - America/Korea Product Only
Composite/Component (common), PC D-Sub, DVI(MagicInfro), HDMI1, HDMI2, DP, Audio In, RJ45, RS232C In, USB1(Media Player),
External Ambient Sensor
Output
DP Out, Audio Out, RS232C Out, IR Out
Operating
Temperature : 32 F ~ 104 F (0 C ~ 40 C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4 F ~ 113 F (-20 C ~ 45 C)
Humidity : 5 % ~ 95 %, non-condensing
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor
settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect
product performance.
――This device is a Class A digital apparatus.
248
[Recommendation] - EU Only
•• Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
•• The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product
Support and enter the model name.
•• This equipment may be operated in all EU countries.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
249
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersavign mode only functions when the product is connected to a PC with a power-saving function.
PowerSaver
Normal Operation
Rating
Power Indicator
Off
Power Consumption
230 W
Typical
225 W
Power saving mode
Power off
Max
253 W
Power off
(Power Switch)
Blinking
On
Off
0.5 W
0.5 W
0W
――The displayed power consumption level can vary in different operating conditions or when settings are changed.
――SOG(Sync On Green) is not supported.
――To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product
for an extended period of time (during vacation, etc.).
250
Preset Timing Modes
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than
-- Horizontal Frequency
The time required to scan a single line
from the left to the right side of the
screen is called a horizontal cycle. The
reciprocal number of a horizontal cycle
is called horizontal frequency. Horizontal
frequency is measured in kHz.
-- Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what the
viewer sees. The rate of a single image
being displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical
frequency to 60Hz using the CDT product before you exchange it with the LCD product.
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC
does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by
referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
251
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA,1440 x 900
55.935
59.887
106.500
-/+
VESA,1600 x 900
60.000
60.000
108.000
+/+
VESA,1680 x 1050
65.290
59.954
146.250
-/+
VESA,1920 x 1080
67.500
60.000
148.500
+/+
252
Chapter 16
Appendix
Contact SAMSUNG WORLD WIDE
――If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
NORTH AMERICA
U.S.A
1-800-SAMSUNG(726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG(726-7864)
http://www.samsung.com/ca (English)
http://www.samsung.com/ca_fr (French)
MEXICO
01-800-SAMSUNG(726-7864)
http://www.samsung.com
ARGENTINE
0800-333-3733
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
BRAZIL
0800-124-421
http://www.samsung.com
LATIN AMERICA
4004-0000
CHILE
800-SAMSUNG(726-7864)
http://www.samsung.com/cl
From mobile 02-24 82 82 00
253
LATIN AMERICA
COLOMBIA
01-8000112112
http://www.samsung.com/co
Bogotá: 6001272
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
DOMINICA
1-800-751-2676
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
ECUADOR
1-800-10-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
EL SALVADOR
800-6225
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
HONDURAS
800-27919267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
JAMAICA
1-800-234-7267
http://www.samsung.com
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
PANAMA
800-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
PARAGUAY
98005420001
http://www.samsung.com
PERU
0-800-777-08 (Only from landline)
http://www.samsung.com
336-8686 (From HHP & landline)
254
LATIN AMERICA
PUERTO RICO
1-800-682-3180
http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com
URUGUAY
40543733
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com
AUSTRIA
0810 - SAMSUNG (7267864, € 0.07/min)
http://www.samsung.com
BELGIUM
02-201-24-18
http://www.samsung.com/be (Dutch)
EUROPE
http://www.samsung.com/be_fr (French)
BOSNIA
051 133 1999
http://www.samsung.com
BULGARIA
07001 33 11 , normal tariff
http://www.samsung.com
CROATIA
062 SAMSUNG (062 726 786)
http://www.samsung.com
CYPRUS
8009 4000 only from landline
http://www.samsung.com
(+30) 210 6897691 from mobile and land line
CZECH
800 - SAMSUNG (800-726786)
http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17,
180 00, Praha 8 till 8.2.2013 . From 8.2.2013: Samsung Electronics Czech and
Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4
DENMARK
70 70 19 70
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com/ee
255
EUROPE
FINLAND
030-6227 515
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com/fr
GERMANY
0180 5 SAMSUNG bzw.
http://www.samsung.com
0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max.
0,42 €/Min.)
GREECE
80111-SAMSUNG (80111 726 7864) only from land line
http://www.samsung.com
(+30) 210 6897691 from mobile and land line
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com
ITALIA
800-SAMSUNG(726-7864)
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.com/lt
LUXEMBURG
261 03 710
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
http://www.samsung.com
NORWAY
815 56480
http://www.samsung.com
POLAND
0 801-1SAMSUNG(172-678) *
http://www.samsung.com/pl
lub +48 22 607-93-33 **
* (całkowity koszt połączenia jak za 1 impuls według taryfy operatora)
** (koszt połączenia według taryfy operatora)
PORTUGAL
808 20-SAMSUNG(808 20 7267)
http://www.samsung.com
256
EUROPE
ROMANIA
08008 SAMSUNG (08008 726 7864)
http://www.samsung.com
TOLL FREE No.
SERBIA
+381 11 321 6899
http://www.samsung.com
(old number still active 0700 7267864)
SLOVAKIA
0800 - SAMSUNG(0800-726 786)
http://www.samsung.com
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
SWITZERLAND
0848 - SAMSUNG(7267864, CHF 0.08/min)
http://www.samsung.com/ch (German)
http://www.samsung.com/ch_fr (French)
U.K
0330 SAMSUNG (7267864)
http://www.samsung.com
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
BELARUS
810-800-500-55-500
http://www.samsung.com
GEORGIA
0-800-555-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500(GSM: 7799)
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
MOLDOVA
0-800-614-40
http://www.samsung.com
MONGOLIA
+7-800-555-55-55
http://www.samsung.com
CIS
257
CIS
RUSSIA
8-800-555-55-55
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
UKRAINE
0-800-502-000
http://www.samsung.com/ua (Ukrainian)
http://www.samsung.com/ua_ru (Russian)
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
AUSTRALIA
1300 362 603
http://www.samsung.com
CHINA
400-810-5858
http://www.samsung.com
HONG KONG
(852) 3698 4698
http://www.samsung.com/hk (Chinese)
ASIA PACIFIC
http://www.samsung.com/hk_en (English)
INDIA
1800 3000 8282
http://www.samsung.com/in
1800 266 8282
INDONESIA
0800-112-8888
http://www.samsung.com/id
021-5699-7777
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com
258
ASIA PACIFIC
PHILIPPINES
1-800-10-SAMSUNG(726-7864) for PLDT
http://www.samsung.com/ph
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
SINGAPORE
1800-SAMSUNG(726-7864)
http://www.samsung.com
TAIWAN
0800-329-999
http://www.samsung.com
0266-026-066
THAILAND
1800-29-3232
http://www.samsung.com/th
02-689-3232
VIETNAM
1 800 588 889
http://www.samsung.com
8000-4726
http://www.samsung.com/ae (English)
MENA
BAHRAIN
http://www.samsung.com/ae_ar (Arabic)
EGYPT
08000-726786
http://www.samsung.com
IRAN
021-8255
http://www.samsung.com
JORDAN
800-22273
http://www.samsung.com/Levant (English)
065777444
KUWAIT
183-2255 (183-CALL)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
MOROCCO
080 100 2255
http://www.samsung.com
259
MENA
OMAN
800-SAMSUNG(726-7864)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
QATAR
800-2255 (800-CALL)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
SAUDI ARABIA
9200-21230
http://www.samsung.com/sa (Arabic)
SYRIA
18252273
http://www.samsung.com/Levant (English)
TURKEY
444 77 11
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
ANGOLA
91-726-7864
http://www.samsung.com
BOTSWANA
0800-726-000
http://www.samsung.com
CAMEROON
7095- 0077
http://www.samsung.com
COTE D’ IVOIRE
8000 0077
http://www.samsung.com
GHANA
0800-10077
http://www.samsung.com
AFRICA
0302-200077
KENYA
0800 545 545
http://www.samsung.com
NAMIBIA
8197267864
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com
260
AFRICA
SOUTH AFRICA
0860-SAMSUNG (726-7864)
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
ZAMBIA
211350370
http://www.samsung.com
261
Responsibility for the Pay Service
(Cost to Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•• If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's programme.
•• If customer requests software installation and setup for the product.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through homeshopping or online.
262
WEEE
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them
through your local, free battery return system.
263
Optimum Picture Quality and Afterimage Burn-in Prevention
Optimum Picture Quality
•• To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may
degrade if the optimum resolution is not selected.
-- Resolution: 1920 x 1080
-- Vertical frequency (refresh rate): 48 ~ 75 Hz
Screen refresh rate: refers to the number of times a display image is refreshed per second.
•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product
performance.
-- The number of sub-pixels by panel type: 6,220,800
•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto adjustment, adjust Coarse or Fine.
•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
-- Activate power-saving mode or a dynamic screen saver if you will not be using the product for an extended period of time.
•• Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to only one resolution to obtain the optimum picture quality. Therefore, setting a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for
your monitor.
264
Prevention of Afterimage Burn-in
Black Matrix
Common
Electrode (ITO)
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a
continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more
than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
Color-Filter
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner. When this
occurs, a previous image can remain on the screen when the pattern changes. To prevent this, the accumulated
voltage difference should be reduced.
――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
Source
Drain
Preventing afterimage burn-in
――The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a
screen saver when not in use. Also, Warranty service may be limited depending on instruction guide.
Gate
TFT
Data Bus-Line
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
•• Powering Off, Screen Saver and Power Saving Mode
-- Power off the product for 4 hours after using it for 20 hours.
-- Power off the product for 2 hours after using it for 12 hours.
-- Go to Display Properties > Power Supply on your PC and set the product to power off as required.
-- Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
•• Regular colour Change
-- Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
Type 1
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
265
•• Avoid combinations of a text colour and background colour of contrasting brightness.
――Avoid using grey as it may contribute to afterimage burn-in.
――Avoid using colours of contrasting brightness (black and white; grey).
-- Brightness: refers to the lightness
or darkness of a colour which varies
depending on the amount of light
emitted.
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
•• Regular Text colour Change
-- Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
-- Move and change text every 30 minutes as shown below.
FLIGHT
: TIME
FLIGHT
: TIME
OZ348
: 20:30
OZ348
: 20:30
[ Step 1 ]
[ Step 2 ]
[ Step 3 ]
-- Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
266
Licence
Manufactured under licence from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium
content.
DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of DivX, Inc. and
are used under licence.
Ⓡ
Manufactured under a licence from U.S. Patent No’s: 5,956,674, 5,974,380,
5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723,
7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and
the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a
trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
ABOUT DIVX VIDEO: DivXⓇ is a digital video format created by DivX, Inc. This is an official DivX
CertifiedⓇ device that plays DivX video. Visit www.divx.com for more information and software tools
to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedⓇ device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
267
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of sending
pixels that form an image progressively.
A larger number of pixels will deliver a
clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every other
line of pixels is scanned from top to
bottom first and then the remaining
lines of pixels (that were not scanned)
are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a horizontal
line from the top to the bottom of a
screen progressively. Interlace mode
displays the odd number lines first
and the even number lines next. Noninterlace mode is mainly used in
monitors as it produces screen clarity
and interlace mode is mainly used in
TVs.
Dot Pitch____ The screen consist of
red, green and blue dots. A shorter
distance between the dots produces a
higher resolution. Dot pitch refers to the
distance between the shortest distance
between dots of the same colour. Dot
pitch is measured in millimeters.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light that
flickers) to display an image for a viewer
to see. The rate of a single image being
displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being
displayed 60 times in one second.
Horizontal Frequency____ The time
required to scan a single line from the
left to the right side of the screen is
called a horizontal cycle. The reciprocal
number of a horizontal cycle is called
horizontal frequency. Horizontal
frequency is measured in kHz.
Source____ Input source refers to a
video source device connected to the
product such as a camcorder or video
or DVD player.
Component ports (green, blue and
red)____ The component ports, which
identify, transmit and receive contrast
signals, provide superior picture quality
to any other video connection methods.
DVD (Digital Versatile Disc)____ DVD
refers to a CD-sized mass storage disk
where you can save multimedia (audio,
video or game) applications using
MPEG-2 video compression technology.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between a
monitor and PC to produce an optimum
display environment. The product uses
VESA DDC (international standard) to
execute Plug & Play.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition video
source by using a single cable without
compression.
Resolution____ Resolution is the
number of horizontal dots (pixels) and
vertical dots (pixels) that form a screen.
It represents the level of display detail.
A higher resolution enables more
data to be displayed on the screen
and is useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080 consists
of 1,920 horizontal pixels (horizontal
resolution) and 1,080 vertical pixels
(vertical resolution).
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is an
application that allows multiple display
devices to be controlled simultaneously
using a PC. Communication between
a PC and monitor takes place using
RS232C (serial data transmission) and
RJ45 (LAN) cables.
268
Download PDF

advertising