Samsung | MM-C530D | Samsung MM-C550D User Manual

MM-C430D
MM-C530D
MM-C550D
PERSONAL MICRO COMPONENT
SYSTEM
user manual
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
AH68-02272U(Rev 1.0)
MM-C430D-530D-MEA-MIC-ENG-1.indd
2-3
www.samsung.com/register
2010-3-15
9:52:22
Safety Warnings
Precautions
ENG
PREPARATION
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock
or personal injury.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER (or BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates important instructions
accompanying the product.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
CAUTION
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and shall stay readily operable at any time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
[Saudi Arabian Standards Organisation only]
THIS APPLIANCE IS FITTED WITH 220V SASO APPROVED PLUG.THE CUSTOMER IS ENTITLED TO A FREE SASO
APPROVED 127V PLUG FROM THE LOCAL DEALER.
WHAT’S INCLUDED
Check for the supplied accessories below.
Phones
Video Cable
Note
FM Antenna
User's Manual
iPod Dock(Option)
• The accessories may look slightly different than those pictured above.
1
MM-C430D-530D-MEA-MIC-ENG-1.indd
4-5
Remote Control
Protect the player from moisture(i.e. vases) , and excess heat(e.
g.fireplace) or equipment creating strong magnetic or electric fields (i.
e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
2010-3-15
9:52:28
Features
The MM-C430D/C530D/C550D combines the convenience of multi-disc playback capability,
including DVD, CD, MP3-CD, CD-R, CD-RW, DivX,JPEG and DVD-R/RW, with a sophisticated
FM tuner, USB HOST all in a single player.
ENG
PREPARATION
Multi-Disc Playback & FM Tuner, USB HOST.
Contents
PREPARATION
Safety Warnings ................................................................................................................................................................. 1
Precautions......................................................................................................................................................................... 2
Features ............................................................................................................................................................................. 3
Notes on discs .................................................................................................................................................................... 5
Description.......................................................................................................................................................................... 7
CONNECTIONS
TV Screen Saver Function
The MM-C430D/C530D/C550D automatically brightens and darkens the brightness of the TV
screen after 5 minutes in the stop mode.
The MM-C430D/C530D/C550D automatically switches itself into the power saving mode after 30
minutes in the screen saver mode.
Power Saving Function
The MM-C430D/C530D/C550D automatically shuts itself off after 30 minutes in the stop mode.
USB Host support
You can enjoy media files such as pictures, movies and music saved on an MP3 player, digital
camera or USB memory stick by connecting the storage device to the USB port of the Micro
Component.
HDMI
HDMI transmits DVD video and audio signals simultaneously,and provides a clearer picture.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate the main unit using a Samsung TV remote
control, by connecting the Micro Component System to a SAMSUNG TV using a HDMI Cable.
(This is only available with SAMSUNG TV's that support Anynet+.)
Connecting the Speakers ................................................................................................................................................... 11
Connecting the Video Out to your TV ................................................................................................................................. 12
HDMI Function.................................................................................................................................................................... 13
P.SCAN(Progressive Scan) Function ................................................................................................................................. 16
Connecting an iPod(Option) ............................................................................................................................................... 17
Connecting External Components ...................................................................................................................................... 19
Connecting the FM Antennas ............................................................................................................................................. 20
Setting the Clock ................................................................................................................................................................ 21
OPERATION
Disc Playback ..................................................................................................................................................................... 22
MP3/WMA-CD Playback .................................................................................................................................................... 23
JPEG File Playback ............................................................................................................................................................ 24
DivX Playback .................................................................................................................................................................... 25
Using an iPod(option) ......................................................................................................................................................... 27
Playing Media Files using the USB feature ........................................................................................................................ 29
Displaying Disc Information ................................................................................................................................................ 31
Fast/Slow Playback ............................................................................................................................................................ 32
Skipping Scenes/Songs...................................................................................................................................................... 33
Angle Function.................................................................................................................................................................... 34
Repeat Playback ................................................................................................................................................................ 35
A-B Repeat Playback ........................................................................................................................................................ 36
Zoom Function.................................................................................................................................................................... 37
Selecting Audio/Subtitle Language..................................................................................................................................... 38
Moving Directly to a Scene/Song ....................................................................................................................................... 39
Using Disc Menu ................................................................................................................................................................ 40
Using the Title Menu........................................................................................................................................................... 41
SETUP
Setting the Language ......................................................................................................................................................... 42
Setting TV Screen type....................................................................................................................................................... 43
Setting Parental Controls (Rating Level) ............................................................................................................................ 45
Setting the Password.......................................................................................................................................................... 46
Setting the DRC (Dynamic Range Compression) .............................................................................................................. 47
AV SYNC Setup ................................................................................................................................................................. 48
RADIO OPERATION
Listening to Radio ............................................................................................................................................................... 49
Presetting Stations ............................................................................................................................................................. 50
MISCELLANEOUS
iPod support(option)
You can enjoy music files by connecting your iPod to the Micro Component with the supplied
iPod dock.
3
MM-C430D-530D-MEA-MIC-ENG-1.indd
CD RIPPING Function ........................................................................................................................................................ 51
Timer Function.................................................................................................................................................................... 52
Canceling the Timer ........................................................................................................................................................... 53
Power Sound / Power Bass Function ................................................................................................................................ 54
DSP/EQ Function .............................................................................................................................................................. 55
Sleep Timer Function / Mute Function................................................................................................................................ 56
DEMO Function / DIMMER Function ................................................................................................................................. 57
Connecting Headphones/Microphone ................................................................................................................................ 58
Cautions on Handling and Storing Discs ............................................................................................................................ 59
Before Calling for Service ................................................................................................................................................... 60
Notes on Terminology ........................................................................................................................................................ 62
Specifications ..................................................................................................................................................................... 63
4
6-7
2010-3-15
9:52:31
Notes on Discs
ENG
Disc Recording Format
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby
Digital surround sound and MPEG-2 video compression technology. Now you
can enjoy these realistic effects in the home, as if you were in a movie theater
or concert hall.
~ 6
1
DVD players and the discs are coded by region. These regional codes must
match in order for the disc to play. If the codes do not match, the disc will not
play. The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
12cm
Audio + Video
DVD-VIDEO
8cm
VIDEO
AUDIO-CD
COMPACT
Audio
DIGITAL AUDIO
Audio + Video
DivX
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a <This disc cannot be played. Please check the disc.> message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a <This disc cannot be played. Please check the regional code.> message appears on the TV
screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD
player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copyprotected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
5
MM-C430D-530D-MEA-MIC-ENG-1.indd
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
the disc.
• Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minute as they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be
able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc
can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~
320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc
can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
DVD R/RW, CD-R/RW DivX Discs
• Software updates for incompatible formats are not supported.
(Example : QPEL, GMC, resolution higher than 720 x 480 pixels, etc.)
• Sections with a high frame rate might not be played while playing a DivX file.
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX
Ultra Certified device that plays DivX video.
6
8-9
2010-3-15
9:52:35
—Rear Panel—
Description
ENG
1. AUX IN
2. FM Antenna Connector
MM-C430D
3. HDMI OUT Connector
4. Video Output Connector
PREPARATION
8
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT
connector.
—Front Panel—
5. Component Output
8
Connectors
Connect a TV with component video
input jacks to these jacks.
6. Speaker Connector
5
1
3 4
2
5
Terminals
7. Cool Fan
8. Clamp-Wire (Fasten the
speaker wires.)
7
6
1. AUX IN
2. FM Antenna Connector
MM-C530D
9
3. IPOD Jack
4. HDMI OUT Connector
5. Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT
connector.
6. Component Output
Connectors
1
2
3
Connect a TV with component video
input jacks to these jacks.
4
iPod
7. Speaker Connector
1.
2.
3.
4.
5.
COMPACT DISC COMPARTMENT
USB JACK
HEADPHONE JACK
MIC JACK
WINDOW DISPLAY
1 2 3
7
8
9
1.
2.
3.
4.
5.
6.
7.
8.
OPEN/CLOSE BUTTON
FUNCTION BUTTON
SEARCH FUNCTION BUTTON(DOWN)
TUNING MODE OR STOP BUTTON
PLAY/PAUSE BUTTON
SEARCH FUNCTION BUTTON(UP)
VOLUME CONTROL BUTTON(+,-)
POWER BUTTON
Connect the TV's video input jacks
(VIDEO
IN) to the VIDEO OUT connector.
6. Component Output
Connectors
7
Connect a TV with component video
input jacks to these jacks.
iPod
7. Speaker Connector
1 2 3
4 5
6
7
8
8
All those pictures of Rear panel are based on MODEL:MM-C550D
MM-C430D/C530D: 2.0 Channel Speaker Output
MM-C550D: 2.1 Channel Speaker Output
7
MM-C430D-530D-MEA-MIC-ENG-1.indd
6
MM-C550D
—Top Panel—
1 2 3 4 5 6
4 5
10-11
Terminals
8. Cool Fan
9. Clamp-Wire (Fasten the
speaker wires.)
1. AUX IN
2. FM Antenna Connector
3. IPOD Jack
4. HDMI OUT Connector
5. Video Output Connector
Terminals
8. Cool Fan
9. Clamp-Wire (Fasten the
speaker wires.)
8
2010-3-15
9:52:36
Description
ENG
POWER button
TIMER ON/OFF button
TIMER/CLOCK button
Insert Remote Batteries
OPEN/CLOSE button
DEMO/DIMMER button
DVD button
TUNER button
AUX button
PORT button
the battery
1 Remove
cover in the direction
of the arrow.
Number(0~9) buttons
CD RIPPING button
STEP button
CD Skip buttons
VOLUME button
RETURN button
DSP/EQ button
ECHO button
9
MM-C430D-530D-MEA-MIC-ENG-1.indd
Replace the battery
cover.
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
EXIT button
SUBTITLE button
MO/ST button
SLOW button
ZOOM button
POWER SOUND button
REPEAT A-B button
3
TUNING button/Tuning Preset button
REPEAT button
SLEEP button
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
Play button
Stop button
SEARCH buttons
MUTE button
Cursor/ENTER button
INFO button
2
CANCEL button
PAUSE button
AUDIO button
MENU button
PREPARATION
—Remote Control—
REMAIN button
MIC VOL + button
TUNER MEMORY button
POWER BASS button
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
30
30
MIC VOL - button
ANGLE button
10
12-13
2010-3-15
9:52:39
Connecting the Speakers
Connecting the Video Out to your TV
Before moving or installing the product, be sure to turn off the power and
disconnect the power cord.
SW
Please be sure to turn off the power and unplug the power cord before moving or
installing this unit.
Please choose one video connection method.
R
CONNECTIONS
L
ENG
iPod
METHOD 2
METHOD 1
Position of the DVD Player
Selecting the Listening Position
• Place it on a stand or cabinet shelf, or under the TV stand.
The listening position should be located about 2.5 to 3 times the
distance of the TV's screen size away from the TV.
Front Speakers L R
Example : For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
• Place these speakers in front of your listening position, facing
inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at the same
height as your ear.
Subwoofer
METHOD 3
(supplied)
SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
METHOD 1 : HDMI ....... (Best Quality)
MM-C430D/
C530D
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack
on your TV.
MM-C550D
L
R
L
SPEAKERS
OUT (6 )
SPEAKERS OUT
FRONT(6 ) SUB WOOFER(4 )
L
L
R
R
SW
R
METHOD 2 : Component Video ....... (Better Quality)
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input
jacks on your TV.
METHOD 3 : Composite Video ....... (Good Quality)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
• Do not let children play with or near the speakers. They could get hurt if a speaker falls.
• Keep the speaker out of reach of children so as to prevent children from inserting their hands or alien substances
into the duct (hole) of the subwoofer speaker.
• Do not hang the subwoofer on the wall through the duct (hole).
• If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by
the speaker. If this occurs, place the speaker away from your TV set.
11
MM-C430D-530D-MEA-MIC-ENG-1.indd
• Resolutions available for the HDMI output are 480p/576p, 720p,1080i/1080p. See page 15 for resolution setting.
• This product operates in Interlace scan mode (480i/576i) for Component Output.
• After making the video connection, set the Video input source on your TV to match the corresponding Video output
(HDMI, Component or Composite) on your Micro Component.
See your TV owner's manual for more information on how to select the TV's Video Input source.
• If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the Micro Component
using the TV's remote control. (This is only available with SAMSUNG TV's that support Anynet+(HDMI-CEC).)
• Please check the
logo (If your TV has the
logo, then it supports the Anynet+ function.).
12
14-15
2010-3-15
9:52:42
HDMI Function
HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
Using HDMI, the Micro Component System transmits a digital video and audio signal and displays a vivid picture on a
TV having an HDMI input jack.
• HDMI connection description
HDMI connector - Supports video and digital audio data.
— HDMI outputs only a pure digital signal to the TV.
— If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this Micro Component System to a SAMSUNG TV using a
HDMI Cable. This is only available with SAMSUNG TV's that support Anynet+.
CONNECTIONS
• HDMI (High Definition Multimedia Interface)
ENG
1. Connect the main unit of the Micro Component System to a
With Anynet+
Samsung TV with an HDMI cable. (See page 12)
You can operate this unit, power on
2. Set the Anynet+ function on your TV.
your TV, or watch a movie by pressing
You can operate the Micro Component System by using
the Play button on your Samsung TV's
,
,
the TV remote control. (Available TV buttons : ,
remote control.
, S,T and W,X buttons, ~
button)
• Why does Samsung use HDMI?
Analogueue TV's require an Analogueue video/audio signal. However, when playing a DVD, the data transmitted to a
TV is digital. Therefore either a digital-to-Analogueue converter (in the Micro Component System) or an Analogueueto-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the
player to your TV.
• What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from
being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV,
projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
• What is Anynet+?
Anynet+ is a convenient function that offers linked operation of this unit through Samsung TV's with the Anynet+
feature.
logo, then it supports the Anynet+ function.
— If your Samsung TV has an
— If you turn on the player and insert a DVD disc, the player will start playing the disc, and the TV will turn on
automatically and switch to HDMI mode.
— If you turn on the player and press the Play button with a DVD disc already inserted, the TV will immediately turn on
and switch to HDMI mode.armore information of using Anynet+(HDMI-CEC), please refer to your TV’s user manual.
— Regarding more information of using Anynet+(HDMI-CEC), please refer to your TV’s user manual.
Press the Anynet+ button on the TV remote control, select Micro Component form Select Device to connect
and set the option of each item below.
• View TV : If Anynet+(HDMI CEC) is set to on and you select
View TV, the Micro Component will automatically switch to stop mode.
• Menu on Device : You can access and control the Micro Component menu.
• Device Operation : The Micro Component disc playback information will be displayed.
You can control the Disc operation of the Micro Component such as title, chapter and subtitle
change.
• Receive is not available.
• When you playback CD during CEC ON, if you turn off the TV Power, the Micro Component doesn't
automatically turn off the Power.
BD Wise (Samsung products only)
You can select to use the BD Wise menu only if the Micro Component is connected to a Samsung TV that
supports BD Wise using an HDMI cable.
• What is BD Wise?
BD Wise automatically adjusts BD Wise-compliant Samsung products to the optimal settings between
them.This feature is enabled only if BD Wise-compliant Samsung products are connected to each other
using an HDMI cable.
• To use BD Wise
1. Use an HDMI cable to connect the Micro Component to a BD Wise-compliant Samsung TV.
2. Set each BD Wise menu of the Micro Component and the Samsung TV to On, respectively.
— This will optimize the picture quality according to the content (In the disc, DVD, etc) that you want to play.
— This will also optimize the picture quality between the Micro Component and your BD Wise-compliant
Samsung TV.
• If you want to change the resolution in BD Wise mode, you must set BD mode to Off in advance.
• If you set the BD Wise mode to off, the resolution of the connected TV will be adjusted to its maximum
resolution automatically.
• BD Wise will be disabled if the player is connected to a device that does not support BD Wise.
13
MM-C430D-530D-MEA-MIC-ENG-1.indd
14
16-17
2010-3-15
9:52:46
HDMI Function(continue)
P.SCAN (Progressive Scan) Function
Why use HDMI (High Definition Multimedia Interface)?
This device transmits a DVD video signal digitally without the process of converting to analog.
You will get sharper digital pictures when using an HDMI connection.
ENG
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
Setting the HDMI Audio
1. In Stop mode, press the MENU button.
2. Press the Cursor , button to move to <Audio> and then press the
ENTER button.
3. Press the Cursor , button to move to <HDMI AUDIO> and then
press the ENTER button.
4. Press the Cursor , button to select <ON> or <OFF> and then
press the ENTER button.
You can select "Progressive Scan" or "Interlace Scan" for you TV.
Please go to <Setup> <Display Setup> <Video Output> and set I-SCAN or P-SCAN.
(see the page 43.)
CONNECTIONS
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
Progressive Scan (FULL FRAME)
• ON : Both video and audio signals are transmitted over the HDMI connection
cable, and audio is output through your TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only, and audio is
output through the Micro Component speakers only.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• ECHO/P.SOUND/P.BASS/DSP/EQ function is not available when HDMI AUDIO is ON.
• MIC output is not available while HDMI AUDIO ON.
Setting the HDMI Resolution
The function allows the user to select the screen resolution for HDMI output.
1. In Stop mode, press the MENU button.
2. Press the Cursor , button to move to <Setup> and then press the
ENTER button.
3. Press the Cursor , button to move to <Display Setup> and
then press the ENTER button.
4. Press the Cursor , button to move to <HDMI Resolution> and
then press the ENTER button.
5. Press the Cursor , button to select the desired item and then
press the ENTER button.
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/25th of a second, contains
two interfaced fields, thus a total of 50 fields are
displayed every 1/50th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that
support Progressive Video. (It does not work on TVs with conventional component inputs, i.e.,
non-progressive scan TVs.)
• Depending on the brand and model of your TV, this function may not work.
• Before set the I-SCAN or P-SCAN mode, please disconnect the HDMI cable first.
• Resolutions available for the HDMI output are 480p/576p, 720p, 1080i, 1080p.
• SD(Standard Definition) resolution is 480p/576p and HD(High Definition)
resolution is 720p, 1080i, 1080p.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
• If the TV does not support the configured resolution, you will not be able to see the picture
properly.
• See your TV owner's manual for more information on how to select the TV's Video Input
source.
15
MM-C430D-530D-MEA-MIC-ENG-1.indd
18-19
16
2010-3-15
9:52:47
Connecting an iPod(Option)
ENG
iPod models that are available to MM- C530D/C550D
You can listen to audio from an iPod through the main unit. For iPod operation with this Micro
Component, see this page and page 27.
iPod touch
(2nd generation)
2GB 4GB 8GB
(1st generation)
iPod nano
iPod touch
(3rd generation)
(2nd generation)
4GB 8GB
8GB 16GB 32GB
4GB 16GB 32GB
iPod
(5th generation)
30GB 60GB 80GB
iPod classic
CONNECTIONS
iPod
iPod nano
80GB 120GB 160GB
iPod nano
(4th generation)
8GB 16GB
ipod
 “Made for iPod” means that an electronic accessory has been designed to connect
specifically to iPod and has been certified by the developer to meet Apple performance
standards.
 Apple is not responsible for the operation of this device or its compliance with safety and
(supplied)
regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
1. Connect the iPod dock connector to the iPod jack on the Micro Component.
2. Press the PORT button on the remote control to select iPod to listen to music or to view
videos.
• You can also use the FUNC. button on the main unit.
The mode switches as follows :
DVD/CD ➞ TUNER ➞ USB ➞ IPOD➞ IPOD MUSIC ➞ AUX➞ DVD.
 Depending on the type of iPod, you may need to insert one of the dock slots which are
provided by Apple when you purchase the iPod. (see next page).
 Adjust the volume to a moderate level before you connect your iPod and Micro Component.
 When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery.
 You must have the VIDEO output connected to your TV view iPod video.
iPod
(supplied)
18
17
MM-C430D-530D-MEA-MIC-ENG-1.indd
20-21
2010-3-15
9:52:52
Connecting the FM Antennas
Connecting External Components
ENG
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
CONNECTIONS
FM Antenna (supplied)
iPod
(not supplied)
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
1
2
Connect the FM antenna supplied to the FM COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
Note
• This unit does not receive AM broadcasts.
Cooling Fan
1
2
The cooling fan supplies cool air to the unit to prevent overheating.
Connect AUX IN on the player to Audio Out on the external analog component.
Please observe the following cautions for your safety.
• Be sure to match connector colors.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the
temperature inside the unit could rise and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or
ventilation holes are covered with a newspaper or cloth, heat may build up
inside the unit and fire may result.)
Press AUX to select AUX.
• ‘AUX’ appears in the display.
20
19
MM-C430D-530D-MEA-MIC-ENG-1.indd
22-23
2010-3-15
9:52:54
Disc Playback
Setting the Clock
ENG
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
2
Switch the system on
by pressing POWER
button.
Press TIMER/CLOCK
twice.
• "CLOCK" is displayed.
5
• Increase the minutes :
• Decrease the minutes :
Note
• Increase the hours :
• Decrease the hours :
When the correct
time is displayed,
press ENTER.
• "TIMER" appears in the display.
• The current time is now set.
•
on the main set instead of
buttons in step 3,4.
Each time the REMAIN button is pressed ,
the time is displayed as below:
DVD
TITLE REMAIN TIME
CHAPTER REMAIN TIME
• Place a disc gently into the tray with the disc’s label facing up.
Press OPEN/CLOSE button to close the disc
tray.
• For mixed discs, the play order is as below:MP3/WMA DIVX JPEG.
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some MP3-CDs cannot be played.
• For CD discs, you can press the numeric buttons to select the track, when you
•
•
•
press the numeric buttons after 3 seconds, the playback starts automatically.
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
DTS Audio disc is not supported.
DVD Audio disc is not supported.
• If pressed once,
Press the REMAIN button.
being played.
Load a disc.
To stop playback, press STOP button during playback.
Checking the Remaining Time
• For checking the remaining time of a title or chapter
2
3
Note
• You can display the time, even when you are using another function, by pressing
TIMER/CLOCK once.
You can also use
1
OPERATION
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
3
Press ENTER.
The hour flashes.
Press OPEN/CLOSE button to open the
disc tray.
CD
MP3
Press the REMAIN button.
 If you press the REMAIN button,
the remaining time is displayed.
 To cancel this function, press the
REMAIN button again.
the stop position will be stored in memory. If PLAY (
) button
is pressed, playback resumes from the stop position. (This function works only with
DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY (
playback starts from the beginning.
) button is pressed,
To temporarily pause playback, press PAUSE button
during playback.
• To resume playback, press PLAY(
) button again.
ELAPSED TIME
21
MM-C430D-530D-MEA-MIC-ENG-1.indd
22
24-25
2010-3-15
9:52:56
MP3/WMA-CD Playback
JPEG File Playback
ENG
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Use
1
Load the MP3/WMA
disc.
2
to select the album,
and then press the
ENTER button.
Rotate/Flip Function
Press Cursor
,
,
,
buttons during playback.
button, the picture will rotate as clockwise.
• The appearance of the menu depends
Press
button, the picture will rotate as counter-clockwise.
• WMA-DRM files cannot be played.
Press
button, it will display the previous picture.
Press
button, it will display the next picture.
and playback will start.
• Use
to select the track.
on the MP3/WMA disc.
OPERATION
Press
• The MP3/WMA menu screen will appear
Slide Show play Function
3
To change the
album, use
to select another
album in Stop mode,
and then press the
ENTER button.
4
Press the STOP
button to stop
playback.
• To select another album and track,
repeat Steps 2 and 3 above.
Note
Press INFO button during playback, and then press INFO button
or Cursor , buttons to select the Slide Show Speed, the
playback speed changes as follows:
SLIDE SHOW SPEED
Normal
SLIDE SHOW SPEED
Slow
SLIDE SHOW SPEED
Fast
• Depending on the recording mode, some MP3/WMA-CDs may not be played.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track
format recorded on the disc.
23
MM-C430D-530D-MEA-MIC-ENG-1.indd
24
26-27
2010-3-15
9:53:00
DivX Playback
5 Minutes Skip function
During playback, press the
,
ENG
button.
• Go to the screen 5 minutes after whenever you press button.
• Go to the screen 5 minutes earlier whenever you press button.
Note • For MPG format files, 5 minute skip function is not supported.
Audio Display
Skip Forward/Back
During playback, press the
• Go to the next file whenever you press
2 files in the disk.
button.
button, if there are over
• Go to the previous file whenever you press
button, if there are over
• If there are multiple audio tracks on a disc, you can toggle between them.
• Each time you press the button, your selection will toggle between AUDIO(OFF, 1/1, 1/2 ...).
AUDIO
Fast playback
Press
OPERATION
2 files in the disk.
Press the AUDIO button.
CH1 DOLBY DIGITAL 5.1 CH
Subtitle Display
button.
Press the SUBTITLE button.
• Each time the button is pressed during playback,
• Each time you press the button, your selection will changed as below:
SUBTITLE
OFF
SUBTITLE
KOR
• If the disc has only one subtitle file, it will be played automatically.
• Up to 8 subtitle languages are supported.
DivX Feature Table
• To resume normal playback, press PLAY (
) button.
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
SPEC
VIDEO Compatibility
DivX3.11
Up to the latest VERSION
AUDIO Compatibility
MP3
CBR : 8kbps~320kbps
AC3
CBR : 32kbps~640kbps
WMA CBR1:Stereo case:48kbps~384kbps
CBR2:Mono case:64kbps~192kbps
Note
25
MM-C430D-530D-MEA-MIC-ENG-1.indd
MPEGs containing DivX can be divided into Video and Audio.
• Video compatibility : All versions of DivX later than 3.11 (including
the latest 5.1) are supported. In addition, XviD is supported.
• Audio compatibility : MP3s encoded at bit rates from 8kbps to
320kbps, AC3s from 32kbps to 640kbps, and WMAs from 48kbps to
384kbps are supported.
• In addition, for subtitles, this unit will support Text format (SMI).
• When playing the DivX disk, you can play the file with extension of AVI only.
• Among the available DivX audio formats, DTS Audio is not supported.
• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
• MPEG 1 Layer 1 (MP1) is not supported.
26
28-29
2010-3-15
9:53:04
Using an iPod(Option)
You can enjoy playback of your iPod using the supplied remote control.
ENG
Listening to Music(iPod Music)
You can play music files stored in the iPod player by connecting it to the Micro Component system.
1. Connect the iPod dock connector to the iPod jack on the Micro Component.
2. Place the iPod in the Dock.
• Your iPod is automatically turned on.
3. Press the PORT button on the remote control to select iPod Music mode.
Listening to Music(iPod)
You can play music files stored in the iPod player by connecting it to the Micro Component system.
1. Connect the iPod dock connector to the iPod jack on the Micro
Component.
2. Place the iPod in the Dock.
• Your iPod is automatically turned on.
3. Press the PORT button on the remote control to select iPod mode.
4. Press the S,T buttons on the remote control to select iPod mode.
5. Press the S,T buttons on the remote control to select Music and press the ENTER button.
• The Music categories appear.
6. Press the S,T buttons desired category and press the ENTER button.
• The music list appears on your TV.
7. Press the S,T buttons to select the music file to play and press the
ENTER/PLAY button.
• The music will start with a new screen which shows the song title, artist, album, time
and progress bar.
8. You can use the remote control or main unit to control simple playback
/ , / and REPEAT.
functions such as PLAY, PAUSE, STOP,
• Press the STOP button to return to the previous menu.
To move to the Music List and select a file:
1. Press the STOP button.
• It stops playing and returns to the music list.
2. Press the S,T buttons to select the file you want to play and press the ENTER/PLAY button.
• Press the STOP button to return to the parent menu.
Music categories
File information including the artist name, album name, music title and genre will be displayed according to the ID3
Tag information on the appropriate music file.
Artists : To play by artist.
Songs : To play in numeric or alphabetical order
Playlists : To play by Playlist.
Albums : To play by album.
Genres : To play by genre.
Composer : To play by composer.
M
 See page 18 for compatible iPods.
Compatibility depends on the software version of your iPod.
 The category list may differ, depending on the iPod model.
 What is an ID3 Tag?
27
MM-C430D-530D-MEA-MIC-ENG-1.indd
This is what is attached to an MP3 to carry information relevant to the file such as
the title, artist, album, year, genre and a comment field.
30-31
4. You can use the remote control or main unit to control simple playback functions such as PLAY,
/ , / and REPEAT.
PAUSE, STOP,
• Press the STOP button to return to the previous menu.
M
 See page 18 for compatible iPods
 When using the iPod music function,Video output is nothing.
 What is iPod Music?
iPod Music is a feature for user using the iPod.In this feature,the user can enjoy your music simply at
your iPod device.
OPERATION
• "iPod Connected" message appears on the TV screen.
• If the iPod player is connected to the Micro Component system, each time you press the
PORT button, it will be toggled in the order of USB IPOD.
• If the iPod player is connected to the Micro Component system, each time you press the PORT button, it will be
toggled in the order of USB IPOD IPOD MUSIC.
• The music file play automatically.
Watching a Video
You can play video files stored in the iPod player by connecting it to the Micro Component system.
1. Connect the iPod dock connector to the iPod jack on the Micro Component.
2. Place the iPod in the Dock.
3. Press the PORT button on the remote control to select iPod mode.
• "iPod Connected" message appears on the TV screen.
• If the iPod player is connected to the Micro Component system, each time you press the PORT button, it will be
toggled in the order of USB IPOD.
4. Press the S,T buttons on the remote control to select iPod mode.
5. Press the S,T buttons on the remote control to select Video and press the ENTER/PLAY button.
• The video list appears on your TV.
6. Press the S,T buttons to select the video file to play and press the ENTER button.
• Video file of the iPod player will be played on the TV screen.
7. You can use the remote control or main unit to control simple playback
functions such as PLAY, PAUSE, STOP, / and / .
• If you press the
button within 3 seconds after the playback, the player will play
previous file.
If you press the
button 3 seconds or later after the playback, the player will move to
the start screen of the current file..
button to play next file.
• Press the
To move to the Video List and select a file:
1. Press the STOP button.
• It stops playing and returns to the video list.
2. Press the S,T buttons to select the file you want to play and press the ENTER/PLAY button.
• Press the STOP button to return to the parent menu.
M







See page 18 for compatible iPods.
Compatibility depends on the software version of your iPod.
You must have the VIDEO output connected to your TV to view iPod video (See page 12).
iPod video is available when video output is composite.
If you want to watch iPod video via VIDEO output, change composite(CVBS) on the TV video input source.
When the current fi le is played to the end, the next fi le will be played automatically.
If connected iPod does not support video playback, “Cannot play video fi les saved on this iPod” message
appears when you select the Video menu.
 If you select iPod mode during HDMI Audio is on, HDMI will automatically change to OFF mode.
 The repeat function is not available during viewing the iPod vedio.
28
2010-3-15
9:53:07
Playing Media Files using the USB feature
USB Host Specification
You can connect and play files from external USB storage devices such as MP3 players,
USB flash memory, etc. using the player's USB function.
USB Host Specification
1
2
Connect the USB
cable.
Press the FUNC. button
on the main set or the
PORT button on the
remote control to select
the USB mode.
Non-compliance
Operational Limitations
• USB SORTING screen appears on the
TV screen and the saved file is played.
ENG
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type cable.
• Supports UMS (USB Mass Storage Device) V1.0 compliant devices.
• Supports the device of which the connected drive is formatted in the FAT(FAT, FAT16,
FAT32) file system.
• Does not support a device that requires installing a separate driver on the PC (Windows).
• Does not support connection to a USB hub.
• A USB device that is connected using the USB extension cable may not be recognized.
• A USB device requiring a separate power source needs to be connected to the player
with the separate power connection.
• If the connected device has multiple drives (or partitions) installed, only one drive
(or partition) can be connected.
• A device supporting USB 1.1 alone may cause a difference in the picture quality,
depending on the device.
Compliant Devices
OPERATION
1. USB Storage Device
2. MP3 Player
3. Digital Camera
To stop playback, press the STOP (
Note
4. Removable HDD
• Removable HDDs equipped with less than 160 Gbytes are supported. Removable HDDs
equipped with 160Gbytes or more may not be recognized, depending on the device.
• If the connected device does not work due to insufficient power supply, you can use a separate
power cable to supply power so that it can work properly. The connector of the USB cable may
differ, depending on the manufacturer of the USB device.
) button.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
• Video files (DivX, MPEG, etc.) are supported.
• To prevent the loss of data saved in the USB device, please turn the unit off or
switch it to another mode before disconnecting the USB cable.
• The play order is as follow: MP3/WMA
DIVX
Compliant File Formats
JPEG.
Skip Forward/Back
During playback, press the
button, the next file is selected.
button, the previous file is selected.
Fast playback
or
• Each time you press either button, the playback speed will change as follows:
x 8
or  x 2
• To resume normal playback, press PLAY (
29
MM-C430D-530D-MEA-MIC-ENG-1.indd
File extension
Bit rate
Version
Pixel
Sampling
Frequency
Still Picture
JPG
JPG .JPEG
–
–
640x480
–
MP3
.MP3
8~320kbps
–
–
44.1kHz
WMA
.WMA
V8
–
44.1kHz
DivX3.11~
DivX5.1, XviD
720x480
44.1KHz~48KHz
x 4
x 8
) button.
button
Stereo:48~384kbps
Music
Mono:64~192kbps
Movie
To play back the disc at a faster speed, press
during playback.
x 4
File name
button.
• When there is more than a file, when you press the
• When there is more than a file, when you press the
x 2
Format
DivX
.AVI
4Mbps
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected to a
PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• MPEG 1 Layer 1 (MP1) is not supported.
30
32-33
2010-3-15
9:53:10
Displaying Disc Information
Fast/Slow Playback
ENG
You can view playback information on the disc on the TV screen.
Fast Playback
Press
Press INFO button.
• Press Cursor
,
DVD
CD
MP3
buttons.
• Each time you press either button during playback,
buttons select the desired item, and then press ENTER button to select the desired item.
the playback speed changes as follows:
DVD
DVD
DIVX
Display disappears
32
128
128
MP3
Display disappears
• What is a Title?
A movie contained in a DVD disc.
• To resume normal playback, press PLAY (
• What is a Chapter?
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
• Depending on the disc, the disc information display may appear different.
DivX
• In Pause mode or Slow mode, you can use
the
button to select as below:
• To resume normal playback, press PLAY (
Note
31
MM-C430D-530D-MEA-MIC-ENG-1.indd
34-35
) button.
Slow Playback
Each title on a DVD disc is divided into several smaller sections called "chapters".
Note
32
NUMBER
CD
•
16
OPERATION
0~9
16
) button.
• During fast playback of a CD or MP3-CD, sound is not heard.
• No sound is heard during slow playback and step motion playback.
• During slow playback of a DIVX, the playback speed maybe
abnormal.
32
2010-3-15
9:53:14
Skipping Scenes/Songs
Angle Function
ENG
This function allows you to view the same scene in different angles.
DVD
MP3
JPEG
Briefly press
DIVX
CD
DVD
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will
be played.
DVD
JPEG
DIVX
MP3
1
Press ANGLE
button.
2
Press Cursor ,
buttons to select the
desired angle.
• Each time the button is pressed,
CD
the angle changes as follows:
OPERATION
Note
Playing Frame by Frame
DVD
• The Angle function works only with discs on which multiple angles
have been recorded.
DIVX
Press STEP button.
• The picture moves forward one frame each time
the button is pressed during playback.
33
MM-C430D-530D-MEA-MIC-ENG-1.indd
34
36-37
2010-3-15
9:53:19
Repeat Playback
A B Repeat Playback
ENG
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
CD
MP3
DVD
DIVX
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback
mode changes as follow:
Title Chapter
Off
DIVX
Track Folder
Off
MP3
DIVX
Press the REPEAT A-B
button at the point where you
want repeat play to start (A).
DVD
DIVX
Repeat A-B A-
CD
MP3
A-B A-
2
Press the REPEAT A-B
button at the point where you
want repeat play to stop (B).
DVD
DIVX
Repeat A-B A-B
CD
MP3
A-B A-B
OPERATION
DVD
1
CD
MP3
CD
Repeat Playback Options
• Track: Repeatedly plays the selected track.
• Folder: Repeatedly plays all tracks in the selected folder.
• Title: Repeatedly plays the selected title.
• Chapter: Repeatedly plays the selected chapter.
• Off: Cancels Repeat Playback.
•
•
•
•
•
Normal (Audio CD(CD-DA)/MP3): Tracks on a disc are played in
the order in which they were recorded on the disc.
Repeat track (Audio CD(CD-DA)/MP3)
Repeat Folder (MP3)
Repeat All (Audio CD(CD-DA)): All tracks are repeated.
Shuffle (Audio CD(CD-DA)/MP3)(Each track can be played
one time.)
- When playing an Audio CD(CD-DA): The shuffle option plays
a disc’s tracks in shuffle order.
- When playing an MP3 disc : The shuffle option plays a
folder’s file in shuffle order.
35
MM-C430D-530D-MEA-MIC-ENG-1.indd
3
To return to nomal play, press
the REPEAT A-B button again.
DVD
DIVX
CD
MP3
Repeat A-B Off
• The A-B Repeat and Repeat function does not operate with JPEG disc.
• The time space of point A and B should be more than 5 seconds.
36
38-39
2010-3-15
9:53:29
Selecting Audio/Subtitle Language
Zoom Function
ENG
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
DVD
1
DIVX
Audio Language Selection Function
JPEG
Press ZOOM
button.
2
Press Cursor ,
, buttons to
move the area.
DVD
DIVX
1. Press INFO button.
2. Press Cursor , buttons to select
the Audio.
3. Press Cursor , buttons to select
the desired Audio language.
,
Each time the button is pressed,
the zoom level changes as follow:
2 x 4 x OFF.
Subtitle Language Selection Function
OPERATION
• Depending on the number of languages
on a DVD disc, a different audio
language (ENGLISH, SPAIN,FRENCH,
etc.) is selected each time the button is
pressed.
DVD
DIVX
1. Press INFO button.
2. Press Cursor , buttons to
select the Subtitle.
3. Press Cursor , buttons to
select the desired Subtitle
language.
Note
• You can use the AUDIO or SUBTITLE button on the remote control to select an audio or subtitle language.
• Depending on the disc, the Subtitle and Audio Language functions may not work.
• When you use AUDIO button to select "DTS", sound is not heard, and the TV displays as below:
38
37
MM-C430D-530D-MEA-MIC-ENG-1.indd
40-41
2010-3-15
9:53:33
Using Disc Menu
Moving Directly to a Scene /Song
ENG
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
Moving to a Title
DVD
DIVX
DVD
1. Press INFO button.
2. Press Cursor , buttons to select
the Title.
3. Press Cursor , or numeric
buttons to select the desired Title
and then press ENTER button.
4
Press Cursor ,
, buttons to select
the desired item and
then press ENTER
button.
DVD
1. Press INFO button.
2. Press Cursor , buttons to select
the Chapter.
3. Press Cursor , or numeric
buttons to select the desired Chapter
and then press ENTER button.
Moving to a Time
3
Press Cursor ,
buttons to select the
desired item and then
press ENTER button.
2
Press Cursor , buttons
to move to ‘DISC MENU’
and then press ENTER
button.
OPERATION
Moving to a Chapter
1
In stop mode, press
MENU button.
DVD
DIVX
1. Press INFO button.
2. Press Cursor , buttons to select
the Playing Time.
3. Press numeric buttons to select the
desired playing time and then press
ENTER button.
Press RETURN button to return to the previous level.
Note
on the remote control to move directly
• You can press
to the desired chapter.
• Depending on the disc, you may not be able to move to the
selected title or time.
NUMBER
Press EXIT button to exit the setup screen.
40
39
MM-C430D-530D-MEA-MIC-ENG-1.indd
Press MENU button to exit the setup screen.
0~9
42-43
2010-3-15
9:53:40
Using the Title Menu
Setting the Language
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
OSD language is set to English by default.
DVD
1
In stop mode, press
MENU button.
4
Press Cursor ,
, buttons to select
the desired item and
then press ENTER
button.
1
4
2
3
Press Cursor ,
button to select the
‘Language Setup’
and then press ENTER
button.
OPERATION
3
Press Cursor ,
buttons to select the
desired item and then
press ENTER button.
2
Press Cursor ,
button to move to
‘Title Menu’ and
then press ENTER
button.
In stop mode, press
MENU button.
Press Cursor ,
button to move to
‘Setup’ and then
press ENTER button.
ENG
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language
was set to English, OSD will be displayed in
English.
Selecting the
Player Menu Language
Selecting the
Disc Menu Language
(recorded on the disc)
Selecting the
Audio Language
(recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even if
you set it to your desired
language.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
Selecting the Subtitle Language
Selecting the DivX Subtitle
(recorded on the disc)
Language (recorded on the disc)
Press MENU or EXIT button to exit the setup screen.
41
MM-C430D-530D-MEA-MIC-ENG-1.indd
Press RETURN button to return to the previous level.
44-45
42
2010-3-15
9:53:49
Setting TV Screen type
1
In stop mode, press
MENU button.
2
ENG
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
16:9 Wide
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
3
Press Cursor ,
button to move to
‘Display Setup’ and
then press ENTER
button.
4
Press Cursor ,
button to 'Tv Aspect'
and then press
ENTER button.
(4:3 Letter box)
4:3PS
(4:3 Pan&Scan)
5
Press Cursor ,
button to move to
‘Screen Messages’
and then press
ENTER button.
• You can select 'On' or 'Off'.
On: you can see the screen messages.
Off: you can't see the screen messages.
6
Press Cursor ,
button to 'Video
Output' and then
press ENTER button.
• You can select 'I-SCAN' or 'P-SCAN'.
(see the page 16 about P-SCAN or
I-SCAN mode.)
Note
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
SETUP
• You can select '4:3 Letter Box', '4:3
Pan&Scan' or '16:9 Wide' mode for
your TV.
4:3LB
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
43
MM-C430D-530D-MEA-mic-ENG-2.indd
34-35
44
2010-3-15
9:49:55
Setting Parental Controls (Rating Level)
Setting the Password
Use this to restrict playback of adult or violent DVDs you do not want children to view.
You can set the password for the Parental (rating level) setting.
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor , button
to select the 'Rating Level'
and then press ENTER
button.
5
Enter the password
and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
3
Press Cursor button
to move to ‘Parental
Setup’ and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
1
In stop mode, press
4
Press Cursor , button
to select the 'Change
Password' and then press
ENTER button.
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor button to
move to ‘Parental
Setup’ and then press
ENTER button.
SETUP
1
In stop mode, press
ENG
• Enter the old password, a new
password.
• The setting is complete.
Note
• This function works only if a DVD disc
contains the rating level information.
45
MM-C430D-530D-MEA-mic-ENG-2.indd
36-37
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press CANCEL button to cancel the error numeric when you inputting password.
Press EXIT button to exit the setup screen.
Press MENU button to exit the setup screen.
46
2010-3-15
9:50:07
Setting the DRC (Dynamic Range Compression)
AV SYNC Setup
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
MENU button.
Press Cursor , button
to select the 'DRC' and
then press ENTER button.
2
4
Press Cursor ,
adjust the ‘DRC’.
to
• You can set the DRC between 0 and 8.
Set it to the optimal status.
47
MM-C430D-530D-MEA-mic-ENG-2.indd
38-39
1
3
In stop mode, press
MENU button.
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press
the ENTER button.
SETUP
3
In stop mode, press
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
ENG
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
Press EXIT button to exit the setup screen.
48
2010-3-15
9:50:17
Presetting Stations
Listening to Radio
You can store up to:
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
Remote Control Unit
1
Press TUNER
button.
ENG
15 FM stations
Example: Presetting FM 89.1 in the memory
2
Tune into the
desired station.
Press the STOP ( ) button
to select PRESET and then
press TUNING , button to select the
preset station.
1
2
Press the TUNER
button and select
the FM band.
Preset Tuning 1
Automatic Tuning 2
TUNING
the band.
,
Press TUNING
to select
"89.10".
,
3
Press the TUNER
MEMORY button.
• Refer to Step 2 on page 49
to automatically or manually
tune in to a station.
Press the STOP ( ) button to
select "AUTO" and then press
button to automatically search
kHz
kHz
kHz
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly press
TUNING
frequency.
Main Unit
2
to tune into a lower or higher
Select a broadcast
station.
Preset Tuning 1
press
station.
Press the STOP ( ) button
to select PRESET and then
button to select the preset
Press the STOP ( ) button to
select "AUTO" and then press
button to automatically search the
4
Press TUNING
, to select preset
number.
• You can select between 1 and
seconds, the preset disappears and “FM”
displays.
MO
MO
kHz
6
To preset another
station, repeat
steps 2 to 5.
• If you can’t press “TUNER MEMORY” in 5
15.
Automatic Tuning 2
5
Press the TUNER
MEMORY button.
RADIO OPERATION
1
Press the FUNC.
button to select the
FM band.
,
kHz
band.
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune into a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
49
MM-C430D-530D-MEA-mic-ENG-2.indd
40-41
50
2010-3-15
9:50:24
CD RIPPING Function
Timer Function
ENG
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options.
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
If you exceed this time, you must start again.
1
Switch the system
on by pressing
POWER.
4
Press CD
RIPPING button
on remote control
to starting ripping.
¡ If the system is playing state, press this button,
“TRACK RIPPING” is displayed and CD
RIPPING starts.
¡ If the system is playing state, press and hold this
button, “FULL CD RIPPING” is displayed and CD
RIPPING starts.
¡ During CD ripping, do not disconnect USB
device.
2
5
Connect the
USB.
To stop ripping, press
STOP( )button.and
then automatically
create and save as
the MP3 file.
After CD-Ripping,a directory named
“RIPPING FOLDER” will be created in your
device.The file name is same with the disc.
3
Load a compact
disc(Digital
Audio).
Press the OPEN/CLOSE button to open
the CD door.
Insert a CD and press the OPEN/CLOSE
button to close the CD door.
Use the CD selection (
to select the desired song.
Example: You wish to wake up to music every morning.
1
◆ Don’t disconnected USB and AC Cord during CD-Ripping. This may cause
the file damage. If you want to stop CD-Ripping during CD-Ripping, you must
press stop Key first and after the CD Stopped, then you can remove the USB
device.
◆ DTS-CD can’t for CD Ripping.
◆ With external HDD, FAT format the USB can be CD Ripping, but not NTFS.
The CD Ripping function of this product does not support all USB devices.
◆ When you use CD high speed search function or in the Pause or Stop mode,
the CD Ripping can’t work.
◆ During CD Ripping, do not deal impact. If is shocked while CD Ripping, CD
Ripping maybe disengage.
seconds, followed by any switchon time already set; you can set
the timer switch-on time.
4
◆ When CD Ripping completes or Stops, the CD will reload.
◆ When HDMI audio on, the CD RIPPING can’t work.
• The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
MM-C430D-530D-MEA-mic-ENG-2.indd
or
7
Press or button
to select the source to
be played when the
system switches on.
• TUNER (radio) :
a Press ENTER.
b Select a preset station by pressing
or .
• DVD/CD (compact disc) :
Load on or more compact disc.
• USB :Insert a USB.
6
Set the timer
switch-off time.
a. Set the hour by pressing
button.
b. Press ENTER.
seconds, followed by any switchoff time already set; you can now
set the timer switch-off time.
• The source to be selected is
or
• The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
Press or button
to adjust the volume
level and press
ENTER.
displayed.
or
• VOL 10 is displayed, where 10
corresponds to the volume
already set.
8
Press ENTER to
confirm the timer.
9
•
Press POWER to
set the system to
standby mode.
is displayed to the top right of
the time, indicating that the timer
has been set.
• The system will switch on and
off automatically at the required
times.
• If the timer switch on and off times are identical, the word ERROR is displayed.
• If there is no disc or usb, when you select the “DVD, USB, it will automatically change to
“TUNER”.
42-43
or
• TIME OFF is displayed for a few
Note
51
5
Set the timer
switch-on time.
52
2010-3-15
MISCELLANEOUS
◆ Sometimes, some of USB devices, CD Ripping time is long.
3
Press the ENTER
button.
• TIME ON is displayed for a few
◆ If you disconnected USB device when CD Ripping, the main unit will be
power off and you may not delete the ripped file, In this case, please connect
the USB on the PC and backup the USB data on the PC first and then
formate the USB device .
◆ When the USB memory is not enough, it will be displayed “RIPPING
ERROR”.
Press TIMER/
CLOCK until
TIMER is
displayed.
) buttons
a. Set the hour by pressing
button.
b. Press ENTER .
Note
2
Switch the system
on by pressing
POWER.
9:50:29
Canceling the Timer
After having set the timer, it will start automatically as shown by the TIMER indication on the
display. If you no longer wish to use the timer, you must cancel it.
Power Sound/Power Bass
Function
ENG
POWER SOUND Function
To cancel the timer, press TIMER
ON/OFF once.
•
is no longer displayed.
Your micro-compact system is equipped with the function of POWER SOUND
mode .
The function of POWER SOUND mode amplifies bass and improves high key or
bass twice as much for you to appreciate powerful real sound.
Press the P.SOUND button.
When CD Ripping,the P.SOUND function
can’t work and the P.SOUND automatically
covert to “OFF” mode.
Result: “P.SOUND” is displayed for a few seconds.
To cancel this function, press P.SOUND again, “OFF”
is displayed for a few seconds.
To resume the timer, press TIMER
ON/OFF again.
•
is displayed again.
POWER BASS Function
Your micro-compact system has a bass
amplification function called Power Bass. This
function makes the sound more powerful and
real.
Press the P.BASS button.
Note
• You can cancel the timer while the power is on or while the player is in standby.
Result: “P,BASS” is displayed for a few seconds.
To cancel this function, press P.BASS again,
“OFF” is displayed for a few seconds.
When CD Ripping,the P.BASS function can’t work and the P.BASS
automatically covert to “OFF” mode.
MM-C430D-530D-MEA-mic-ENG-2.indd
44-45
2010-3-15
MISCELLANEOUS
54
53
9:50:33
DSP/EQ Function
Sleep Timer Function / Mute Function
ENG
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments.
EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing.
Press the DSP/EQ button.
Each time the button is pressed, the selection changes as
follows:
PASS ➞ ROCK ➞ JAZZ ➞ POP ➞ CLASSIC ➞ DANCE ➞
PARTY ➞ HIP-HOP ➞ DNSE ➞ WIDE 3D
• POP, JAZZ, ROCK : Depending on the genre of music, you
can select POP, JAZZ, and ROCK.
• CLASSIC : Select this when listening to classical music.
• DANCE : Simulates the sound of a dance club with a
throbbing bass beat.
• PARTY : Provides the feeling of a party club.
• HIP-HOP : Provides a clear vocal as if listening HIP-HOP
music.
• DNSE : Provides various sound settings to enhance the
type of music you’re listening to.
• WIDE 3D : Provides various sound settings to enhance the
type of music you’re listening to.
• PASS : Select this for normal listening.
 When you insert the microphone, you can't select DNSE
and WIDE 3D modes.
 When CD Ripping,the DSP/EQ function can’t work and the
DSP/EQ automatically covert to “PASS” mode.
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• Each time the button is pressed, the selection changes as follows:
90 MIN
60 MIN
45 MIN
30 MIN
15 MIN
OFF.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
the button again changes the sleep time from what you have set
•Pressing
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
56
55
MM-C430D-530D-MEA-mic-ENG-2.indd
46-47
2010-3-15
MISCELLANEOUS
• ‘MUTE’ appears in the display.
• To turn off mute, press this button again.
9:50:35
DEMO Function / DIMMER Function
Connecting Headphones/Microphone
ENG
You can connect a set of headphones to your micro component system so that you can listen
to music or radio programmers without disturbing other people in the room. The headphones
must have a 3.5ø jack or an appropriate adapter.
You can also insert microphone to sing along with your favorite CDs.
DEMO Function
You can view the various functions available on your system.
Press DEMO/DIMMER button.
• The various functions available are listed in turn on the display.
• All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sections.
DIMMER Function
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press DEMO/DIMMER button.
• Each time the button is press, the brightness changes as follows:
DEMO ON
DIMMER ON(Dim)
DIMMER OFF(Bright).
Note
Press any buttons to cancel DEMO function.
Connect the headphones
to the headphones jack
on the front panel.
• The loudspeakers are no longer used to
output the sound.
Plug a microphone with a 3.5ø MIC
jack into the Mic terminal.
• Connect one Microphone.
• Press the MIC VOL button to adjust the MIC level.
• Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
• Prolonged use of headphones at a high volume may damage your hearing.
• When you use the headphones, the HDMI Audio will auto swicth to Off mode.
57
MM-C430D-530D-MEA-mic-ENG-2.indd
58
48-49
2010-3-15
MISCELLANEOUS
Note
9:50:38
Cautions on Handling and Storing Discs
Before Calling for Service
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Symptom
Disc tray does not open.
Playback does not start.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
•
•
The remote control does
not work.
Playback does not start
immediately when the Play/
Pause button is pressed.
Sound is not produced.
ENG
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Make sure that the rating level is correct.
• Is the remote control being operated within its operation range of
angle and distance?
• Are the batteries exhausted?
• Are you using a deformed disc or a disc with scratches on
•
the surface?
Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
•
•
motion playback.
Are the speakers connected properly? Is the speaker setup
correctly customized?
Is the disc severely damaged?
Picture does not appear, sound • Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
is not produced, or the disc
and let the player stand for 1 or 2 hours with the power on. (You
tray opens 2 to 5 seconds later. can use the player again after condensation disappears.)
60
59
MM-C430D-530D-MEA-mic-ENG-2.indd
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
50-51
2010-3-15
MISCELLANEOUS
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
9:50:41
Notes on Terminology
Symptom
Check/Remedy
ANGLE
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
them. And depending on the disc, they may work differently.
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
The password for rating
level has been forgotten.
antenna in an area with good reception.
• Turn off the power and hold the STOP
button on the main unit or
on the remote control for longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While the player is in the No Disc mode, hold the main unit's STOP
button for longer than 5 seconds. “INITIAL” appears on the display and
all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
DVD
PCM
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
TRACK NUMBER
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
52-53
2010-3-15
MISCELLANEOUS
62
61
MM-C430D-530D-MEA-mic-ENG-2.indd
mode, or 4:3 PAN SCAN mode. Refer to the DVD disc jacket and
then select the appropriate function.
CHAPTER
NUMBER
ENG
9:50:43
Contact SAMSUNG WORLD WIDE
Specifications
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Region
Country
Customer Care Center
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG (726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG (726-7864)
0-800-100-5303
01-8000112112
1 disc
BELGIUM
02 201 2418
Frequency range
20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio
90 dB (at 1 KHz) with filter
Distortion
0.05 % (at 1 KHz)
Channel separation
60 dB
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
EIRE
AUSTRIA
SWITZERLAND
RUSSIA
KAZAKHSTAN
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
UKRAINE
BELARUS
MOLDOVA
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
800-SAMSUNG (800-726786)
8-SAMSUNG (7267864)
30-6227 515
01 4863 0000
01805-SAMSUNG (726-7864 € 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
02 261 03 710
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
3-SAMSUNG (7267864)
0 801 1SAMSUNG (172678), 022-607-93-33
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
0845 SAMSUNG (7267864)
0818 717 100
0810-SAMSUNG (7267864, € 0.07/min)
0848-SAMSUNG (7267864, CHF 0.08/min)
8-800-555-55-55
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
8-800-502-0000
810-800-500-55-500
00-800-500-55-500
8-800-77777
8000-7267
800-7267
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858, 010-6475 1880
3698-4698
3030 8282, 1800 110011, 1800 3000 8282
0800-112-8888
0120-327-527
1800-88-9999
1-800-10-SAMSUNG (726-7864), 1-800-3SAMSUNG (726-7864),
1-800-8-SAMSUNG (726-7864), 02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
444 77 11
0860-SAMSUNG (726-7864 )
800-SAMSUNG (726-7864), 8000-4726
RADIO
FM
FM Frequency Range
87.5~108.0MHz
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
0.5 %
Latin
America
COMPACT DISC PLAYER
Capacity
Europe
AMPLIFIER
Output power
Front Speaker(8 Ω)
60W/CH X2RMS,IEC (total harmonic distortion: 10 %)(MM-C430D)
Front Speaker(6 Ω)
80W/CH X2 RMS,IEC (total harmonic distortion: 10 %)(MM-C530D/C550D)
Subwoofer Speaker(4 Ω)
120W/CH RMS,IEC (total harmonic distortion: 10 %)(MM-C550D)
Channel separation
60 dB
Signal/noise ratio
70 dB
GENERAL
Power consumption
40W
Dimensions
230(D) x 98(H) x 240 (W) mm
Weight
1.9 Kg
CIS
Asia Pacific
PHILIPPINES
Middle
East &
Africa
www.samsung.ua
www.samsung.com/lt
www.samsung.com/lv
www.samsung.com/ee
www.samsung.com/au
www.samsung.com/nz
www.samsung.com/cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/tr
www.samsung.com/za
www.samsung.com/ae
64
63
MM-C430D-530D-MEA-mic-ENG-2.indd
SINGAPORE
THAILAND
TAIWAN
VIETNAM
TURKEY
SOUTH AFRICA
U.A.E
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com/us
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.com/lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ie
www.samsung.com/at
www.samsung.com/ch
www.samsung.ru
www.samsung.com/kz_ru
www.samsung.com/kz_ru
MISCELLANEOUS
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
NICARAGUA
HONDURAS
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
North America
ENG
WebSite
54-55
2010-3-15
9:50:44
Download PDF

advertising