Samsung | PPM50H3Q | Samsung PPM50H3Q User Manual

BN68-00654A-01Eng
4/19/04
4:12 PM
Page 1
PDP-MONITOR
(PLASMA DISPLAY PANEL)
PPM42S3Q
PPM50H3Q
PPM63H3Q
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Intended for Commercial Use and Operation
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
VIDEO WALL
MDC (MULTIPLE DISPLAY CONTROL)
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 2
Thank You for Choosing Samsung!
ENG
Thank you for choosing Samsung! Your new Samsung product represents the latest in PDP
technology. We designed it with easy-to-use on-screen menus, making it one of the best
products in its class. We are proud to offer you a product that will provide convenient,
dependable service and enjoyment for years to come.
Important Warranty Information Regarding PDP Format
Viewing
Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily
designed to view wide screen format full-motion video. The images displayed on them should primarily
be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and
constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on
non-expanded standard format PDP video and programming, should be limited to no more than 5% of
the total PDP viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays,
station logos, web sites or computer graphics and patterns, should be limited as described above for all
PDP displays. Displaying stationary images that exceed the above guidelines can cause uneven aging of
PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid
this, vary the programming and images, and primarily display full screen moving images, not stationary
patterns or dark bars. On PDP models that offer picture sizing features, use these controls to view
different formats as a full screen picture.
Be careful in the selection and duration of PDP formats used for viewing. Uneven PDP aging as a result
of format selection and use, as well as burned-in images, are not covered by your Samsung limited
warranty.
DNIeTM (Digital Natural Image engine)
This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast
enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer,
much detailed image to you. DNIeTM technology will fit every signals into your eyes.
2
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 3
User Instructions
ENG
◆ Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma display panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of
brightness and contrast of this screen when displaying a still image.
◆ Cell Defect
The plasma display panel consists of fine cells. Although the panels are produced with more than
99.9 percent active cells, there may be some cells that do not produce light or remain lit.
◆ Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place
over 2000m in height and do not install and operate there.
◆ Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Checking Parts
PPM42S3Q &
PPM50H3Q
Owner’s Instructions
Power Cord
Remote Control/
AAA Batteries
2 Install CD
- MDC Software (RS232C) Ferrite Cores for
Speaker Wire
- Pivot software
(2EA)
➢
PC Cable
Speaker Wires
(2EA)
MDC Cable
(RS232C)
Stand-Base
(2EA)
Screws
(4EA)
The PPM42S3Q model uses the same MDC program CD used for PPM42S3 model.
The PPM50H3Q/63H3Q models use the same MDC program CD used for PPM50H3/63H3 models.
3
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 4
ENG
Contents
◆ FOREWORD
■
■
Important Warranty Information Regarding PDP Format Viewing.................
User Instructions............................................................................................
2
3
◆ CONNECTING AND PREPARING YOUR DISPLAY
■
■
■
■
■
■
■
■
■
■
Your New Plasma Display Panel...................................................................
Becoming Familiar with the Remote Control .................................................
Inserting the Batteries in the Remote Control................................................
Assembling the Stand-Base ..........................................................................
Installing the Display on the Wall Attachment Panel .....................................
Installing the Display Vertically ......................................................................
Before Using the Video Wall and the Multiple Display Control function ........
Connecting Speakers ....................................................................................
Switching On and Off.....................................................................................
Choosing Your Language..............................................................................
6
8
9
9
10
12
12
13
15
15
◆ USING YOUR DISPLAY
■
■
■
■
■
■
■
■
■
■
■
■
4
Selecting the Color System (Video or S-Video Mode)...................................
Changing the Picture Mode ...........................................................................
Adjusting the Picture Settings........................................................................
Adjusting the Picture Settings (PC or DVI Mode) ..........................................
Selecting the Picture Size..............................................................................
Activating/Deactivating the Digital Noise Reduction Feature ........................
Freezing the Current Picture .........................................................................
Changing the Sound Mode............................................................................
Adjusting the Sound Settings ........................................................................
Extra Sound Settings.....................................................................................
- Auto Volume
- Melody
- Pseudo Stereo / Virtual Surround
Adjusting the Screen Position and Scale.......................................................
Adjusting the Image Preferences (PC Mode) ................................................
16
16
17
18
19
19
20
20
21
22
23
24
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 5
ENG
Contents (continued)
◆ USING YOUR DISPLAY (CONTINUED)
■
■
■
■
■
■
■
■
■
■
■
■
Locking the Control buttons...........................................................................
Setting the MDC (Multiple Display Control) ...................................................
Protecting the Screen Burning.......................................................................
Setting the Multiple Screen............................................................................
Displaying the PC Information .......................................................................
Displaying the Setting Information.................................................................
Setting and Displaying the Current Time.......................................................
Switching On and Off Automatically ..............................................................
Selecting the Fan...........................................................................................
Setting the Film Mode....................................................................................
Viewing the Picture In Picture (PIP) ..............................................................
Listening to the Sound of the Sub Picture .....................................................
25
25
26
27
28
28
29
30
31
31
32
34
◆ ADDITIONAL INFORMATION AND CONNECTIONS
■
■
■
■
■
■
■
■
■
■
Viewing Pictures From External Sources ......................................................
Connecting to the Audio/Video Input .............................................................
Connecting to the S-Video Input....................................................................
Connecting to the DVD/DTV RECEIVER Input .............................................
Connecting to the DVI Input ..........................................................................
Connecting to the RGB(PC) Input .................................................................
Setting up Your PC Software (Windows only) ...............................................
Pin Configurations .........................................................................................
Input Mode (PC/DVI) .....................................................................................
Power Saver (PC1 mode only) ......................................................................
34
35
36
36
37
37
38
39
40
41
◆ RECOMMENDATIONS FOR USE
■
■
■
Troubleshooting: Before Contacting Service Personnel................................
Care and Maintenance ..................................................................................
Technical Specifications ................................................................................
Symbols
Press
☛
Important
➢
Note
5
42
42
43
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 6
Your New Plasma Display Panel
➢
ENG
The actual configuration on your PDP may be different,
depending on your model.
Front Panel
PPM42S3Q/PPM50H3Q
a
b
c
Speaker
Speaker
PPM63H3Q
a
a
b
c
b
Power Indicator
- Power Off; Red
- Power On; Off
- Timer On; Green
SOURCE
- External input selection.
- Store your settings in the menu.
- When the Main menu is displayed on screen,
the Main menu is not operated with source key.
MENU
c
Menu display and exit.
Remote Control Signal Receiver
- VOL +
Aim the remote control towards this spot on the
PDP.
- Volume adjustment.
- Adjust an option value respectively.
(VOL + : Enter to the selected menu.)
▼ SEL ▲
Control the cursor in the menu.
I/
Press to turn the PDP on and off.
6
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 7
Your New Plasma Display Panel
➢
The actual configuration on your PDP may be different,
depending on your model.
ENG
Rear Panel
➢
For further details about connection, refer to pages 35~37.
a
b
c
d
e
a) RS232C
- IN : Used for the MDC function when connecting
PC or RS232C output of another PDP.
- OUT : Used for the MDC function when
connecting with RS232C input of another
PDP.
f
g
h
j
i
f) VIDEO IN
Video and audio inputs for external devices, such as
VCR, DVD, video game device or video disc players
(or for external devices with an S-Video output;
S-VIDEO).
g) COMPONENT1 IN
b) DVI IN
Connect to the video output jack for device with
DVI output.
Video (Y/Pb/Pr) and audio (L/R) inputs for
component.
h) VIDEO OUT (VIDEO / L-AUDIO-R)
c) AUDIO
Connect to the audio output jack on your PC or any
device with DVI output. (It is audio input for b, d,
and e.)
Used to output screen of Video or S-Video in PDP
when connecting video and/or audio input of
external devices.
i) EXT SPEAKER (8Ω)
d) RGB1(PC1) IN
Connect external speakers.
Connect to the video output jack on your PC.
j) POWER IN
e) COMPONENT2/RGB2(PC2) IN
Connect the supplied power cord.
Connect for input of an Analog RGB or Y/Pb/Pr
video signal from in PC, DVD, or HD devices.
➢
“PC Mode” from this page onward means
PC1/PC2 mode using RGB1(PC1) and
RGB2(PC2).
7
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 8
Becoming Familiar with the Remote Control
ENG
The remote control is used mainly to:
◆ Change sources and adjust the volume
◆ Set up the PDP using the on-screen menu system
PDP ON
PDP OFF
SOUND MODE SELECTION
PICTURE MODE SELECTION
CURRENT TIME DISPLAY
NUMERIC BUTTONS
PICTURE STILL
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
➣ Press it again , or - /+ button
to turn the sound back on.
VOLUME DECREASE
SETTING THE TIMER
DISPLAY AND CLOSE THE MENU/
RETURN TO THE PREVIOUS MENU
ZOOM/PANNING MENU DISPLAY
(ONLY PC MODE)
NEXT CHANNEL
(NOT AVAILABLE FOR THIS MONITOR)
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
(NOT AVAILABLE FOR THIS MONITOR)
INFORMATION DISPLAY
EXIT FROM ANY DISPLAY
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
CHANGE CONFIRMATION
SCREEN EFFECT SELECTION
(BURNING PROTECTION)
MULTIPLE DISPLAY CONTROL
AUTO ADJUSTMENT IN PC MODE
PICTURE SIZE SELECTION
PIP FUNCTIONS;
- PIP ON/OFF
- SIZE SELECTION (SIZE)
- LOCATION SELECTION (LOCATE)
- INPUT SOURCE SELECTION
(SOURCE)
- INTERCHANGE THE MAIN AND THE
SUB PICTURE (SWAP)
- SOUND SELECTION (S.SEL)
➢
8
The performance of the remote control may be affected by bright light.
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 9
Inserting the Batteries in the Remote Control
ENG
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the PDP
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Assembling the Stand-Base
Fit the Stand-Base into the guide hole on the bottom of
the monitor and tighten the left and right sides using
four screws for each side.
➢
◆ Two or more people should carry the PDP.
Never lay the PDP on the floor because of
possible damage to the screen. Always store the
PDP upright.
◆ For the PPM63H3Q model, please see the
instruction for the SMM6330 stand.
9
BN68-00654A-01Eng
4/19/04
4:12 PM
Page 10
Installing the Display on the Wall Attachment Panel
ENG
☛
This wall mount bracket installation guide is for the following models: WMN4230/WMN5030/WMN6330.
This installation guide may be different from the PDP User’s manual. Please refer to the proper
installation guide for your product.
Installation Notes
◆ Do not install the PDP on any place other than vertical walls.
◆ To protect the performance of the PDP and prevent troubles, avoid the followings:
- Do not install next to smoke and fire detectors.
- Do not install in an area subjected to vibration or high voltage.
- Do not install near or around any heating apparatus.
◆ Use only recommended parts and components.
Mounting Kits
Wall Mount Bracket
PPM42S3Q/PPM50H3Q
Plastic Hanger
PPM63H3Q
Screws
PPM42S3Q/PPM50H3Q: 4
PPM63H3Q: 6
How to Adjust Mounting Angle
(depending on your model)
The wall mount bracket is delivered
separately. Please tighten the captive
screw in the direction of the arrow after
assembling the bracket.
10
1
Secure the PDP to the wall mount bracket.
(Please refer to the following instructions.)
2
Set the angle by pulling the upper end of the
PDP attached to bracket in the direction of the
arrow.
3
The angle can be adjusted from 0° to 20° by
±2°.
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 11
Installing the Display on the Wall Attachment Panel
➢
1
The exterior of the PDP may be different than the picture.
(Assembly and installation of the plastic hanger is the same.)
Remove the screws from the back of the PDP.
PPM42S3Q
2
PPM63H3Q
◆ Please ask the installers to install the wall mount bracket.
◆ Please be sure to check if the plastic hanger is completely secured on both the left and right
side after hanging the PDP on the wall mount bracket.
◆ Please avoid catching your fingers while installing and adjusting the angle.
◆ Please tightly secure the wall mount bracket to the wall to avoid injury from a falling PDP.
Tighten the screws of the plastic hanger to the back side of the PDP.
PPM42S3Q
4
PPM50H3Q
Use the screws and assemble the plastic hanger.
☛
3
ENG
PPM50H3Q
PPM63H3Q
Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (!) to
secure it to the wall mount bracket (@). Tighten the screws as shown (#) so that the PDP cannot be
separated from wall mount bracket.
PDP panel
Wall
Wall attachment panel bracket
11
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 12
Installing the Display Vertically
ENG
You can install the PDP vertically. (PPM42S3Q/50H3Q/63H3Q
models are available. Other manufacturers do not guarantee a
reliably working.) In this case, the fan automatically works. If you
wish to stop the fan, position the PDP horizontally and then set
“Selectable Fan” to “Off” in the “Function” menu.
Please use the wall attachment panel exclusively when installing
vertically. And you have to put left side of the PDP on top when
viewed from front.
Before Using the Video Wall and the Multiple Display Control function
Example for 2x2 Video Wall function
1
Please create ID for each PDP before installing
them close together. It may be difficult to create
IDs when operating the remote control for PDPs
that are installed close to each other.
2
For details about Video Wall configuration and
operation, refer to “Setting the Multiple Screen”
on page 27.
Example for 2x2 Video Wall connections
Rear of the PDP
Rear of the PDP
②
②
①
➢
◆ Press the MDC button on the remote control.
Select ID input on the menu. Use the numeric
buttons to enter the ID for PDP adjustment.
You can operate the remote control only for
the PDP that has been selected.
◆ For details about Multiple Display Control, refer
to “Setting the MDC (Multiple Display Control)”
on page 25 and the Help section in MDC
program CD.
◆ The PPM42S3Q model uses the same MDC
program CD used for PPM42S3 model.
The PPM50H3Q/63H3Q models use the
same MDC program CD used for
PPM50H3/63H3 models.
12
①
Example for Multiple Display Control connections
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 13
Connecting Speakers
ENG
1
Remove the screws on the rear of the PDP.
PPM42S3Q
PPM50H3Q
PPM63H3Q
2
Hang the two “T” shaped hangers
on the square holes on the rear of
the PDP.
3
Tighten the PDP and the speaker bracket using the screws removed from the PDP.
PPM42S3Q
➢
PPM42S3Q
PPM50H3Q
PPM50H3Q
PPM63H3Q
PPM63H3Q
When moving your PDP, do NOT hold the speaker connected to your PDP. It may damage the
bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of
personal damage and injury.
13
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 14
Connecting Speakers (continued)
ENG
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching
the “+” and “-” ends of the cable with the diagram on the PDP.
PPM42S3Q/PPM50H3Q
PPM63H3Q
➢
◆ The speakers MUST have to a power handling capability of 10 watts minimum
(impedance 8Ω).
◆ When you connect the speaker wire to the external speaker out connector, first bind the
speaker wire round the ferrite core to secure it.
Ferrite Cores
The ferrite cores are used to attenuate undesired signals.
When connecting cables, attach one of these ferrite cores to the cable
near the connector.
14
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 15
Switching On and Off
ENG
The mains lead is attached to the rear of your PDP.
1
Front of the PDP
Plug the mains lead into an appropriate socket.
Result:
➢
The Standby indicator on the front of the PDP lights up.
The main voltage is indicated on the rear of the PDP and
the frequency is 50 or 60Hz.
2
Press the “ I / ” button on the front of the PDP (or ON (
button on the remote control) to switch the PDP on.
3
To switch your PDP off, press the “ I /
( ) button on the remote control).
)
” button again (or OFF
Choosing Your Language
When you start using your PDP for the first time, you must select the
language which will be used for displaying menus and indications.
1
Press the MENU button.
Result:
2
Language
English
Time
√
Selectable Fan
œ Off √
Film Mode
œ Off √
Press the ▲ or ▼ button to select Function.
Result:
3
The main menu is displayed.
Function
The options available in the Function group are
displayed.
Move
Press the √ button.
Result:
Enter
Language
The Language option is selected.
English
4
Press the √ button again.
Français
Result:
Deutsch
The languages available are listed.
Italiano
5
Select the appropriate language by pressing the ▲ or ▼ button
repeatedly.
Español
Sel.
6
Press the
Store
button to confirm your choice.
15
Return
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 16
Selecting the Color System (Video or S-Video Mode)
➢
ENG
If necessary, select the broadcasting standard which best
corresponds to your viewing requirements.
Picture
Color System
œ AUTO √
Mode
œ Dynamic √
Adjust
√
Color Tone
œ Normal √
Size
Wide
Digital NR
œ Off √
Move
Sel.
Preset to the Video or S-Video mode by using the SOURCE button.
1
Press the MENU button.
Result:
2
Return
Press the √ button.
Result:
3
The options available in the Picture group are
displayed.
The Color System is selected.
Select a required color system by pressing the œ or √ button.
Result:
The following color systems are available.
AUTO - PAL - SECAM - NTSC4.43 - NTSC3.58 PAL M - PAL N - PAL60
Changing the Picture Mode
You can select the type of picture which best corresponds to your
viewing requirements.
Picture
Mode
œ Dynamic √
Adjust
√
Color Tone
œ Normal √
Size
Wide
Digital NR
œ Off √
Move
Sel.
1
Press the MENU button.
Result:
The options available in the Picture group are
displayed.
2
Press the √ button.
3
Press the ▲ or ▼ button to select Mode. Select the option by
pressing the œ or √ button.
Return
Result:
The following modes are available depending on the
input source.
◆ Dynamic - Standard - Movie - Custom
◆ Custom - High - Middle - Low
(PC or DVI Mode)
➣
16
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 17
Adjusting the Picture Settings
ENG
Your PDP has several settings which allow you to control picture
quality.
1
Press the MENU button.
Result:
The options available in the Picture group are
displayed.
2
Press the √ button.
3
Press the ▲ or ▼ button to select Adjust. Press the √ button.
Picture
Mode
œ Dynamic √
Adjust
√
Color Tone
œ Normal √
Size
Wide
Digital NR
œ Off √
Move
Result:
4
The Adjust menu is displayed.
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
5
When you are satisfied with the settings, press the
store them.
6
Press the MENU button.
Result:
7
button to
The options available in the Picture group are
displayed again.
Press the ▲ or ▼ button to select Color Tone. Select the option
by pressing the œ or √ button. The color tones are displayed in
the following order.
Normal - Warm1 - Warm2 - Cool2 - Cool1
➣
Return
Adjust (Dynamic)
Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness, Color, Tint-NTSC only) to be
adjusted. Press the œ or √ button.
Result:
Enter
Contrast
100
Brightness
45
Sharpness
75
Color
55
Move
Adjust
Store
Picture
Mode
œ Dynamic √
Adjust
√
Color Tone
œ Normal √
Size
Wide
Digital NR
œ Off √
Move
Sel.
If you make any changes to these settings, the picture
mode is automatically switched to the Custom.
17
Return
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 18
Adjusting the Picture Settings (PC or DVI Mode)
➢
ENG
1
Preset to the PC or DVI mode by using the SOURCE button.
Press the MENU button.
Picture
Result:
√
√
Mode
œ Custom √
Adjust
√
Color Tone
œ Custom √
Color Adjust
√
Size
Wide
2
Press the √ button.
3
Press the ▲ or ▼ button to select Adjust. Press the √ button.
Result:
urn
Move
Enter
Adjust (Custom)
75
Brightness
60
Sharpness
50
œ Custom √
Adjust
√
Color Tone
œ Custom √
Color Adjust
√
Size
Wide
Move
When you are satisfied with the settings, press the
store them.
6
Press the MENU button.
Sel.
Result:
7
Mode
Return
√
√
Color Tone
œ Custom √
Color Adjust
√
Size
Wide
Press the ▲ or ▼ button to select color Adjust. Press the √
button.
➣
œ Custom √
Move
Enter
◆ The Color Adjust menu can not be selected in DVI
mode.
9
Return
10
Color Adjust
Red
50
Green
50
Blue
50
Move
Adjust
18
Store
The Color Adjust menu is displayed.
◆ When select the Color Tone to Custom, the Color
Adjust menu is displayed.
Press the ▲ or ▼ button to select the option (Red, Green, Blue) to
be adjusted. Press the œ or √ button.
Result:
eturn
The options available in the Picture group are
displayed again.
Press the ▲ or ▼ button to select Color Tone. Select the option
by pressing the œ or √ button. The color tones are displayed in
the following order.
Result:
Picture
Adjust
button to
Custom (PC mode only) - Color1 - Color2 - Color3
8
Mode
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
5
Store
Picture
√
Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness) to be adjusted. Press the œ or √ button.
Result:
Contrast
Adjust
The Adjust menu is displayed.
Return
4
Move
The options available in the Picture group are
displayed.
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
When you are satisfied with the settings, press the
store them.
button to
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 19
Selecting the Picture Size
ENG
You can select the picture size which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result:
The options available in the Picture group are
displayed.
2
Press the √ button.
3
Press the ▲ or ▼ button to select Size. Press the √ button.
4
Select the option by pressing the œ or √ button.
The following modes are available depending on the
Result:
input source.
Picture
Mode
œ Dynamic √
Adjust
√
Color Tone
œ Normal √
Size
Wide
Digital NR
œ Off √
Move
◆ Wide - Zoom1 - Zoom2 - 14:9 - Normal
(Component Mode)
Enter
Return
Size
Wide
œ √ Sel.
Store
◆ Wide - Panorama (Video or S-Video Mode) Zoom1 - Zoom2 - 14:9 - Normal
The lifting is available in the Zoom1, Zoom2 or
14:9 mode by pressing the † or … button.
➣
◆ Wide - Normal
(PC or DVI Mode)
➣
You can also set these options simply by pressing the
P.SIZE button.
Activating/Deactivating the Digital Noise Reduction Feature
If the signal received by your PDP is weak, you can activate this
feature to reduce any static and ghosting that may appear on the
screen.
1
Press the MENU button.
Result:
The options available in the Picture group are
displayed.
2
Press the √ button.
3
Press the ▲ or ▼ button to select Digital NR.
4
Press the œ or √ button to change the setting (On or Off).
Picture
Mode
œ Dynamic √
Adjust
√
Color Tone
œ Normal √
Size
Wide
Digital NR
œ Off √
Move
Sel.
19
Return
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 20
Freezing the Current Picture
ENG
You can freeze the picture when watching a moving picture simply
by pressing the “STILL” button. To return to normal viewing, press
it again.
➣
In the PIP mode, the main and sub pictures are stilled at
the same time.
Changing the Sound Mode
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
Mode
œ Custom √
Equalizer
√
Auto Volume
œ Off √
Melody
œ Off √
Pseudo Stereo
œ Off √
Virtual Surround
œ Off √
Move
Sel.
1
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Sound.
Result:
Return
3
The options available in the Sound group are displayed.
Press the √ button.
Result:
4
The main menu is displayed.
The Mode is selected.
Select the option by pressing the œ or √ button. The sound effects
are displayed in the following order.
Custom - Standard - Music - Movie - Speech
➣
20
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 21
Adjusting the Sound Settings
ENG
The sound settings can be adjusted to suit your personal
preferences.
1
Press the MENU button.
Result:
2
Sound
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
Press the √ button.
4
Press the ▲ or ▼ button to select Equalizer. Press the √ button.
5
6
The Equalizer menu is displayed with the current
option.
Select the option (volume, balance, equalizer) to be adjusted by
pressing the œ or √ button. Press the ▲ or ▼ button to reach the
required setting.
When you are satisfied with the settings, press the
store them.
➣
œ Custom √
Equalizer
√
Auto Volume
œ Off √
Melody
œ Off √
Pseudo Stereo
œ Off √
Virtual Surround
œ Off √
The options available in the Sound group are displayed.
3
Result:
Mode
Move
Enter
Return
Equalizer (Custom)
10
R
L
100 300
œ √ Move
Adjust
button to
If you make any changes to the equalizer settings, the
sound mode is automatically switched to the Custom.
21
1K
3K
10K
Store
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 22
Extra Sound Settings
ENG
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every
time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation
signal is low.
Sound
Mode
œ Custom √
Equalizer
√
Auto Volume
œ Off √
Melody
œ Off √
Pseudo Stereo
œ Off √
Virtual Surround
œ Off √
Move
Sel.
Return
◆ Melody
You can hear clear melody sound when the PDP is
powered on or off.
Sound
Mode
œ Custom √
Equalizer
√
Auto Volume
œ Off √
Melody
œ Off √
Pseudo Stereo
œ Off √
Virtual Surround
œ Off √
Move
Sel.
◆ Pseudo Stereo / Virtual Surround
Pseudo stereo feature converts a monaural sound
signal into two identical left and right channels.
Once the Pseudo stereo or Virtual surround is set
to On or Off, these settings apply to the sound effects
such as Standard, Music, Movie, and Speech.
Return
Sound
Mode
œ Custom √
Equalizer
√
Auto Volume
œ Off √
Melody
œ Off √
Pseudo Stereo
œ Off √
Virtual Surround
œ Off √
Move
Sel.
Mode
œ Custom √
Equalizer
√
Auto Volume
œ Off √
Melody
œ Off √
Pseudo Stereo
œ Off √
Virtual Surround
œ Off √
Sel.
22
Press the MENU button.
Result:
2
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Sound group are displayed.
Return
Sound
Move
1
Return
3
Press the √ button.
4
Select the required option (Auto Volume, Melody, Pseudo
Stereo, Virtual Surround) by pressing the ▲ or ▼ button.
5
Press the œ or √ button to change the setting (On or Off).
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 23
Adjusting the Screen Position and Scale
ENG
1
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Setup.
Result:
3
The options available in the Setup group are displayed.
Screen Adjust
√
Key Lock
œ Off √
Multi Control
√
Burning Protection
√
Video Wall
√
Press the √ button.
Result:
4
Setup
The main menu is displayed.
The Screen Adjust is selected.
Move
Enter
Return
Press the √ button again.
Result:
The Screen Adjust menu is displayed with the
Position selected.
5
Press the √ button over again. Adjust the screen position by
pressing the ▲, ▼, œ, or √ button.
6
When you are satisfied with the setting, press the
store.
7
Press the MENU button.
Result:
button to
Position
√
Scale
√
Reset
√
√ Enter
Move
Return
Position
The Screen Adjust menu is displayed again.
8
Press the ▲ or ▼ button to select Scale. Press the √ button.
Adjust the screen scale by pressing the ▲, ▼, œ, or √ button.
9
When you are satisfied with the setting, press the
store
➣
Screen Adjust
Adjust
Store
button to
Press the ▲ or ▼ button to select Reset. Press the √ button.
The position and scale settings are replaced with the factory
default values.
Screen Adjust
Position
√
Scale
√
Reset
√
√ Enter
Move
Return
Scale
Adjust
Store
Screen Adjust
Position
√
Scale
√
Reset
√
Move
√ Enter
23
Return
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 24
Adjusting the Image Preferences (PC Mode)
ENG
Setup
Image Lock
√
Key Lock
œ Off √
Multi Control
√
Burning Protection
√
Video Wall
√
Information
√
Move
Enter
1
Press the MENU button.
The main menu is displayed.
Result:
2
Press the ▲ or ▼ button to select Setup.
The options available in the Setup group are displayed.
Result:
3
Press the √ button.
The Image Lock is selected.
Result:
4
Press the √ button again.
The Image Lock menu is displayed with the Auto
Result:
Adjustment selected.
5
Press the √ button over again.
The screen size and frequency are automatically reset
Result:
with the Auto Adjustment displayed.
Return
Image Lock
Auto Adjustment
√
Frequency
√
Phase
√
Position
√
Zoom/Panning
√
√ Enter
Move
➣
Return
6
Press the ▲ or ▼ button to select Frequency (or Phase). Press
the √ button.
The horizontal bar is displayed. Move the horizontal
Result:
bar’s cursor left or right by pressing the œ or √ button.
7
When you are satisfied with the settings, press the MENU button.
The Image Lock menu is displayed again.
Result:
8
Press the ▲ or ▼ button to select Position. Press the √ button.
Adjust the screen position by pressing the ▲, ▼, œ, or √ button.
9
When you are satisfied with the setting, press the
store.
10
Press the MENU button.
The Image Lock menu is displayed again.
Result:
11
Press the ▲ or ▼ button to select Zoom/Panning. Press the √
button.
The Zoom/Panning menu is displayed with the Zoom
Result:
selected.
Frequency
0
œ √ Adjust
Return
Position
Adjust
Store
Zoom/Panning
Zoom
1
Panning
√
Reset
√
œ √ Adjust
Move
Return
➣
Zoom/Panning
Zoom
1
Panning
√
Reset
√
√ Enter
Move
1
Panning
√
Reset
√
Move
√ Enter
24
13
Press the ▲ or ▼ button to select Panning. Press the √ button.
Move the magnified picture to required position by using pressing
the ▲, ▼, œ, or √ button.
➢
Return
You can also do simpley by pressing the ZOOM button.
Press the œ or √ button to reach the required magnification.
➢
Zoom
button to
12
Return
Zoom/Panning
You can also do simply by pressing the AUTO button.
Press the ▲ or ▼ button to select Reset. Press the √ button.
The zoom and panning settings are replaced with the factory
default values.
The Panning and Reset menus can be used when value of
Zoom is more than 0.
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 25
Locking the Control buttons
ENG
This feature allows you to lock the PDP so that it cannot be
switched on via the front panel. It can, however, still be switched
on via the remote control. Thus, by keeping the remote control
away from unauthorised users.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Setup
Screen Adjust
√
Key Lock
œ Off √
Multi Control
√
Burning Protection
√
Video Wall
√
Press the ▲ or ▼ button to select Setup.
Result:
Move
Sel.
Return
The options available in the Setup group are displayed.
3
Press the √ button.
4
Press the ▲ or ▼ button to select Key Lock.
5
Press the œ or √ button to change the setting (On or Off).
Setting the MDC (Multiple Display Control)
1
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are displayed.
3
Press the √ button.
4
Press the ▲ or ▼ button to select Multi Control.
5
Press the √ button.
Result:
Setup
The main menu is displayed.
The Multi Control menu is displayed with the ID
Setup selected.
Screen Adjust
√
Key Lock
œ Off √
Multi Control
√
Burning Protection
√
Video Wall
√
Move
Enter
Multi Control
ID Setup
01
ID Input
6
Select the ID setup number by pressing the œ or √ button.
7
Press the ▲ or ▼ button to select ID Input. Enter ID input
number by using the numeric buttons.
➢
➢
To operate the multi control function, PDP1 and PDP2 should be
set in the ID Setup mode. When entering the ID Input number of
PDP1 while the PDP is set in the ID Input mode, only PDP1 is
switched to the Menu screen and you can operate the remote
control. At this time, PDP2 doesn't operate with the remote control
and displays the standby mode of ID Input.
Return
-œ √ Adjust
Move
Return
Multi Control
ID Setup
01
ID Input
--
Enter ID Input Number
For further details, refer to the MDC program guide.
25
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 26
Protecting the Screen Burning
ENG
You can prevent the residual image of the PDP.
Setup
1
Screen Adjust
√
Key Lock
œ Off √
Multi Control
√
Burning Protection
√
Video Wall
√
Press the MENU button.
Result:
Press the ▲ or ▼ button to select Setup.
2
Result:
Move
Enter
Return
√
Signal Pattern
œ Off √
All White
œ Off √
√ Enter
Move
Return
Press the √ button.
4
Press the ▲ or ▼ button to select Burning Protection.
5
Press the √ button.
Result:
Pixel Shift
➣
œ On √
Set
2
Vertical Line
4
Time
4 MIN
œ √ Sel.
Move
Return
Signal Pattern
œ Off √
All White
œ Off √
œ √ Sel.
Move
8
Select the option (Horizontal Dot, Vertical Line, Time) to be
adjusted by pressing the ▲ or ▼ button. Press the œ or √ button
to reach the required setting.
9
√
Signal Pattern
œ Off √
All White
œ Off √
œ √ Sel.
Return
The Burning Protection menu is displayed again.
10
Press the ▲ or ▼ button to select Signal Pattern. Set to On by
pressing the œ or √ button for removing the residual image.
11
Press the ▲ or ▼ button to select All White. Set to On by
pressing the œ or √ button for removing the residual image after
making the screen white.
➣
26
PPM42S3Q PPM50/63H3Q
2
4
4
4
4MIN
4MIN
When you are satisfied with the settings, press the MENU button.
Result:
Pixel Shift
Move
Optimum condition for pixel shift;
Horizontal Dot
Vertical Line
Time
Return
Burning Protection
You can also do simply by pressing the S.EFFECT button.
Set to On by pressing the œ or √ button for making the screen
move per regular hour and preventing the residual image.
➣
√
The Pixel Shift menu is displayed with the Set
selected.
7
Burning Protection
Pixel Shift
The Burning Protection menu is displayed with
the Pixel Shift selected.
Press the √ button again.
6
Result:
Horizontal Dot
The options available in the Setup group are displayed.
3
Burning Protection
Pixel Shift
The main menu is displayed.
The Signal Pattern and All White feature are
effective after working for a long time.
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 27
Setting the Multiple Screen
ENG
You can get the various display effect with many PDPs.
Setup
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
Press the √ button.
4
Press the ▲ or ▼ button to select Video Wall.
5
Press the √ button.
The Video Wall menu is displayed with the Set
selected.
6
Set to On by pressing the œ or √ button.
7
Press the ▲ or ▼ button to select Screen Divider. Press the √
button.
8
Select the option (2x2, 3x3, 4x4, 1x5, 5x1) by pressing the ▲ or
▼ button. Press the √ button.
9
Press the œ or √ button to select the position of the screens.
➣
√
Key Lock
œ Off √
Multi Control
√
Burning Protection
√
Video Wall
√
The options available in the Setup group are displayed.
3
Result:
Screen Adjust
Move
Enter
Return
Video Wall
œ On √
Set
√
Screen Divider
œ √ Sel.
Move
Return
Video Wall
Set
œ On √
Screen Divider
√
√ Enter
Move
Return
Screen Divider
2x2 √
PIP function does not operate during Video Wall
operation.
3x3
1
3
4x4
2
4
1x5
5x1
√ Enter
Move
Return
Screen Divider
2x2 √
3x3
1
3
4x4
2
4
1x5
5x1
œ √ Sel.
Return
27
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 28
Displaying the PC Information
ENG
1
Setup
Image Lock
√
Key Lock
œ Off √
Multi Control
√
Burning Protection
√
Video Wall
√
Information
√
Move
Return
PC Information
60
H Frequency
48
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
The options available in the Setup group are displayed.
3
Press the √ button.
4
Press the ▲ or ▼ button to select Information.
5
Press the √ button.
Result:
1024x768
V Frequency
2
Result:
Enter
Resolution
Press the MENU button.
Result:
The resolution, vertical frequency and horizontal
frequency are displayed.
Return
Displaying the Setting Information
You can view the setting status you select by pressing the “INFO”
button on the remote control.
Mode
Picture
Sound
Clock
Video
Dynamic
Custom
11:45
28
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 29
Setting and Displaying the Current Time
ENG
You can set the clock so that the current time is displayed. You must
also set the time if you wish to use the automatic on or off timers.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Function
Language
English
Time
√
Selectable Fan
œ Off √
Film Mode
œ Off √
Press the ▲ or ▼ button to select Function.
Result:
The options available in the Function group are
displayed.
3
Press the √ button.
4
Press the ▲ or ▼ button to select Time. Press the √ button.
Move
Enter
Return
Time
Result:
➣
5
Clock Display
œ Off √
Timer
œ Off √
On Time Volume
--:--
Off Time
--:-œ √ Sel.
Set the clock first! If you have not yet set the clock, you can
not set other options of the Time menu.
When you are satisfied with the settings, press the
store them.
button to
Store
Time
11:35
Clock
Clock Display
œ Off √
Timer
œ Off √
On Time Volume
You can also do simply by pressing the CLOCK DISPLAY
button.
10
On Time
Move
Press the ▲ or ▼ button to select Clock Display.
Set to On by pressing the œ or √ button for displaying the current
time.
➣
7
You can also do simply by pressing the TIMER button.
Press the œ or √ button to move to the hour or minute.
Set the hour or minute by pressing the ▲ or ▼ button.
➣
6
The Time menu is displayed with the Clock option
selected.
11:35
Clock
10
On Time
--:--
Off Time
--:--
Move
œ √ Sel.
29
Store
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 30
Switching On and Off Automatically
ENG
You can set the on or off time so that the PDP will:
◆ Switch on automatically and tune to the volume of your
choice at the time you select
Time
11:35
Clock
Clock Display
œ Off √
Timer
œ Off √
On Time Volume
10
On Time
--:--
Off Time
--:--
Move
◆ Switch off automatically at the time you select
1
Result:
œ √ Sel.
The options available in the Function group are
displayed.
11:35
Clock
Clock Display
œ Off √
Timer
œ Off √
On Time Volume
10
On Time
--:--
Off Time
--:-œ √ Adjust
3
Press the √ button.
4
Press the ▲ or ▼ button to select Time. Press the √ button.
Result:
➣
Store
11:35
Clock
Clock Display
œ Off √
Timer
œ Off √
On Time Volume
06:00
Off Time
--:-œ √ Sel.
Press the ▲ or ▼ button to select Timer. Set to On by pressing the
œ or √ button for switching on or off automatically.
6
Press the ▲ or ▼ button to select On Time Volume. Set the
volume by pressing the œ or √ button for tuning to the volume of
your choice at the time switching on.
7
Press the ▲ or ▼ button to select On Time. Press the œ or √
button to move to the hour or minute. Set the time at which you
wish the PDP to be switched on automatically by pressing the ▲
or ▼ button.
8
Press the ▲ or ▼ button to select Off Time. In the same above,
set the time at which you wish the PDP to be switched off
automatically.
9
When you are satisfied with the settings, press the
store them.
Store
Time
11:35
Clock Display
œ Off √
Timer
œ Off √
On Time Volume
10
On Time
06:00
Off Time
23:30
œ √ Sel.
You can also do simply by pressing the TIMER button.
10
On Time
Clock
The Time menu is displayed.
5
Time
Move
Press the ▲ or ▼ button to select Function.
Result:
Time
Move
The main menu is displayed.
Store
2
Move
Press the MENU button.
Store
➣
button to
Absent Power Off
Your PDP will automatically be turned off, if you do not
operate any controls during the 3 hours when the “Timer”
is set to “On” and the “On Time” is set. However, this
feature will not work when the “Off Time” is set.
This feature prevents a leakage accident or overheating,
caused by your PDP left on for an extended time (when
you are away on holiday, for example).
30
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 31
Selecting the Fan
ENG
Operates or stops the TV’s internal Fan.
What is the Fan: Fans inside the TV are used to reduce the
temperature of the tops and the front of the TV. To reduce the noise
of the fan, you may stop the fan by setting the Fan to “Off”. The
temperature of the top and the front of the TV may increase when
you watch the TV for a long period of time while the fan is stopped,
but the TV will operate normally.
1
Language
English
Time
√
Selectable Fan
œ Off √
Film Mode
œ Off √
Press the MENU button.
Result:
2
Function
Move
Sel.
Return
The main menu is displayed.
Press the ▲ or ▼ button to select Function.
Result:
The options available in the Function group are
displayed.
3
Press the √ button.
4
Press the ▲ or ▼ button to select Selectable Fan.
5
Press the œ or √ button to change the setting (On or Off).
➣
◆ If your PDP is displayed vertically, the fan
automatically works.
◆ The message Check Fan is displayed if there is a fan
problem.
◆ Please use the fan when the temperature is over 35
degrees.
Setting the Film Mode
When a video input source is from a film such as movies, this feature
identifies the source and changes to the corresponding screen.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Function
Language
English
Time
√
Selectable Fan
œ Off √
Film Mode
œ Off √
Press the ▲ or ▼ button to select Function.
Result:
The options available in the Function group are
displayed.
3
Press the √ button.
4
Press the ▲ or ▼ button to select Film Mode.
5
Press the œ or √ button to change the setting (On or Off).
➣
Move
Sel.
◆ Automatically senses and processes film signals from all
sources and adjusts the picture for optimum quality.
◆ Available in Video, S-Video, and Component (480i) modes.
31
Return
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 32
Viewing the Picture In Picture (PIP)
ENG
You can display a sub picture within the main picture. In this way
you can monitor the video input from any connected devices while
monitoring other video input.
PIP
PIP
œ On √
Sel.
œ Video √
Swap
√
Size
œ Large √
Position
œ
Sound Sel.
œ Main √
Move
Sel.
1
Result:
√
2
Press the ▲ or ▼ button to select PIP.
3
Press the √ button.
Result:
PIP
œ On √
Sel.
œ Video √
Swap
√
Size
œ Large √
Position
œ
Sound Sel.
œ Main √
Sel.
√
4
Result:
5
Return
The options available in the PIP group are displayed.
Press the ▲ or ▼ button to select Sel.. Select a source of the sub
picture by pressing the œ or √ button.
Result:
The sources are displayed in the following order:
Video - S-Video - Component1 - Component2 PC1 - PC2 - DVI
PIP
œ On √
Sel.
œ Video √
Swap
√
Size
œ Large √
Position
œ
Sound Sel.
œ Main √
√
➣
6
For further details about selecting a source, refer to
“Selecting the source of sub picture depending on the source
of main picture” on page 33.
Press the ▲ or ▼ button to select Swap. Press the √ button.
Result:
Enter
The PIP option is selected.
Set to On by pressing the œ or √ button for activating the PIP
feature.
PIP
Move
The main menu is displayed.
Return
PIP
Move
Press the MENU button.
The main picture and sub picture are interchanged.
Return
7
Press the ▲ or ▼ button to select Size. Select a size of the sub
picture by pressing the œ or √ button.
PIP
Result:
PIP
œ On √
Sel.
œ Video √
Swap
√
Size
œ Large √
Position
œ
Sound Sel.
œ Main √
Move
Sel.
√
Return
PIP
PIP
œ On √
Sel.
œ Video √
Swap
√
Size
œ Large √
Position
œ
Sound Sel.
œ Main √
Move
Sel.
32
√
Return
The sizes are displayed in the following order:
Large - Small - Double1 - Double2
8
Press the ▲ or ▼ button to select Position. Select a location of
the sub picture by pressing the œ or √ button.
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 33
Viewing the Picture In Picture (PIP) (continued)
ENG
Easy functions of remote control.
Buttons
Feature
PIP ON
Used to activate or deactivate the PIP feature directly.
SIZE
Used to select a size of sub picture (Large, Small,
Double1, Double2).
LOCATE
Used to move the sub picture counterclockwise.
SOURCE
Used to assign a source of sub picture.
SWAP
Used to interchange the main picture and the sub
picture.
S.SEL
Used to listen the sound of the sub picture.
Selecting the source of sub picture depending on the source of main picture
Main picture
Video
S-Video
Component1
Component2
PC1
PC2
DVI
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Sub picture
Video
S-Video
✔
Component1
✔
✔
Component2
✔
✔
PC1
✔
✔
PC2
✔
✔
DVI
✔
✔
33
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 34
Listening to the Sound of the Sub Picture
ENG
During the PIP feature is activating, you can listen to the sound of the
sub picture.
PIP
PIP
œ On √
Sel.
œ Video √
Swap
√
Size
œ Large √
Position
œ
Sound Sel.
œ Sub √
Move
√
Sel.
1
Press the MENU button.
Result:
2
Press the ▲ or ▼ button to select PIP.
Result:
Return
The main menu is displayed.
The options available in the PIP group are displayed.
3
Press the √ button.
4
Press the ▲ or ▼ button to select Sound Sel.. Set to Sub by
pressing the œ or √ button.
Result:
➣
You can listen to the sound of the sub picture.
◆ To listen the sound of current main picture, set to Main.
◆ You can also do simply by pressing the S.SEL button.
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made.
2
Switch your PDP on, then press the SOURCE button.
Result:
The input sources available are displayed.
AV Input
Video
S-Video
Component1
Component2
PC1
PC2
DVI
Connected
Not Connected
Connected
Not Connected
Not Connected
Sel.
Store
3
Press the ▲ or ▼ button to select the required input source.
4
Press the
➣
button to store.
◆ If you change the external source while viewing,
pictures might take a short period of time to be
switched.
◆ Connection is not indicated for Component2 and
PC2, which use the same input connector.
34
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 35
Connecting to the Audio/Video Input
ENG
The "VIDEO IN" connectors are used for the equipment with an Composite Video output, such as
video game devices or video disc players.
Rear of the PDP
(Input)
VCR
①
DVD
Decoder /
Video game device
Video disc player
The "VIDEO OUT" connectors are used for the equipment with an
Composite Video input, such as a camcorder or VCR.
Camcorder
Rear of the PDP
(Output)
Satellite receiver
②
① If you have a second VCR and wish to copy cassettes tape, connect the source VCR to “VIDEO IN” and
the target VCR to “VIDEO OUT” so that you can redirect the signal from “VIDEO IN” to “VIDEO OUT”.
② When you wish to record a programme, connect the receiver to “VIDEO IN” and the VCR to “VIDEO
OUT” so that you can redirect the signal from “VIDEO IN” to “VIDEO OUT”.
☛
Whenever you connect an audio or video system to your
PDP, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
35
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 36
Connecting to the S-Video Input
ENG
The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Rear of the PDP
Camcorder
①
and
VCR
① To play picture and sound, both the S-VIDEO and RCA connectors must be used.
Connecting to the DVD/DTV RECEIVER Input
The “COMPONENT1 IN” (or “R(Pr)/G(Y)/B(Pb)” (video) and “AUDIO”) connectors are used for
equipment with a DVD/ DTV RECEIVER output. (480i, 480p, 720p, 1080i)
Rear of the PDP
Y / Pb / Pr
L/R
DVD
or
Pr / Y / Pb
and
or
36
Digital Set-Top Box
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 37
Connecting to the DVI Input
ENG
The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DVI output.
Rear of the PDP
Personal Computer
and
Connecting to the RGB(PC) Input
The “RGB1(PC1) IN” (or “R(Pr)/G(Y)/B(Pb)/H/V”) and “AUDIO”
connectors are used for interfacing with your PC.
Rear of the PDP
or
Personal Computer
37
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 38
Setting up Your PC Software (Windows only)
ENG
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
On the windows screen, select in the following
sequence: Start ➞ Settings ➞ Control Panel.
When the control panel screen appears, click on
Display and a display dialog-box will appear.
Select the Settings tab in the display dialog-box.
The two key variables that apply the PDP-PC interface
are “Resolution” and “Colours”.
The correct settings for these two variables are:
◆ Size (sometimes called “Resolution”)
- 640 x 480 pixels (PPM42S3Q)
- 1024 x 768 pixels (PPM50/63H3Q)
“Not Optimum Mode” message is displayed for
5 seconds initially when the input has higher
resolution than recommended.
◆ Colour
32-bit colour
Shown at left is a typical screen for “Display”
dialog box.
If a vertical-frequency option exists on your display
settings dialog box, the correct value is 60 Hz.
Otherwise, just click OK and exit the dialog box.
38
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 39
Pin Configurations
ENG
RGB(PC) Input Connector
(15Pin)
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
RGB(PC) IN
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC)
Red (R) Grounding
Green (G) Grounding
Blue (B) Grounding
Reserved
Sync Grounding
Grounding
Data (DDC)
Horizontal sync.
Vertical sync.
Clock (DDC)
RS232C Connector
(9Pin)
Pin
1
2
3
4
5
6
7
8
9
Signal
Carrier Detect
Receive Data
Transmit Data
Data Terminal Ready
System Ground
Data Set Ready
Request to Send
Clear to Send
Ring Indicator
DVI Input Connector
(24Pin)
Pin
Signal
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
T.M.D.S. Data2T.M.D.S. Data2+
T.M.D.S. Data2/4 Shield
T.M.D.S. Data4T.M.D.S. Data4+
Clock (DDC)
Data (DDC)
Not Connected
T.M.D.S. Data1T.M.D.S. Data1+
T.M.D.S. Data1/3 Shield
T.M.D.S. Data3T.M.D.S. Data3+
+5V Power
5V Grounding
Hot Plug Detect
T.M.D.S. Data0T.M.D.S. Data0+
T.M.D.S. Data0/5 Shield
T.M.D.S. Data5T.M.D.S. Data5+
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-
39
BN68-00654A-02Eng
5/3/04
9:19 AM
Page 40
Input Mode (PC/DVI)
ENG
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Resolution
VGA
640 x 350
640 x 400
720 x 400
640 x 480
SVGA
800 x 600
XGA
1024 x 768
WVGA
848 x 480
❉SXGA
❉852 x 480
❉1152 x 864
1280 x 1024
WXGA
❉1280 x 768
❉UXGA
1360 x 768
❉1366 x 768
1600 x 1200
◆
◆
◆
◆
Vertical
frequency (Hz)
70
85
85
70
85
60
72
75
85
56
60
72
75
85
60
70
75
❉85
60
72
75
❉85
60
75
60
75
60
75
60
60
60
Horizontal
frequency (kHz)
31.5
37.9
37.9
31.5
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
48.4
56.5
60.0
68.7
29.8
35.1
36.0
37.0
31.8
67.5
64.0
80.0
47.7
60.1
47.8
48.2
75.0
PPM42S3Q PPM50H3Q PPM63H3Q
✔
✔
✔
✔
✔
✔/
✔
✔
✔
✔
✔/
✔
✔
✔
✔/
✔
✔
✔
✔/
✔
✔
✔
✔/
✔
✔
✔
✔
✔
✔
✔
✔
✔/
✔
✔
✔
✔
✔/
✔
✔
✔
✔
✔
✔/
✔
✔/
✔
✔
✔
✔
✔
✔
✔
✔
✔/
✔
✔
✔
✔
✔/
✔
✔
✔
✔
✔
✔/
✔
✔/
✔
✔
✔
✔
✔/
✔
✔
✔/
✔/
✔/
✔
✔
✔/
✔
✔
✔/
✔/
✔/
✔
“❉” mode does not work with DVI mode.
The interlace mode is not supported.
The PDP might operate abnormally if a non-standard video format is selected.
The 1366 x 768 / 852 x 480 mode is only supported by a particular video card (PIXEL PERFECT made by
IMAGINE GRAPHICS Ltd.).
◆ In 1360 x 768 resolution, the screen displays 1360 pixels horizontally.
◆ A “✔” mark means that this mode can be supported.
◆ A “ ” mark means that this mode is recommended.
40
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 41
Power Saver (PC1 mode only)
ENG
This monitor has a built-in power management system called Power Saver. This power management
system saves energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. This power management system operates with a VESA DPMS compliant video
card installed in your computer. You use a software utility installed on your computer to set up this
feature. See the table below for details.
Normal
Operation
State
Power-saving Function Mode
Horizontal Sync
Active
Inactive
Suspend Mode
Position A1
Active
Vertical Sync
Active
Active
Inactive
Inactive
Video
Active
Blanked
Blanked
Blanked
Power Indicator
Off
Red Blinking
Red Blinking
Red Blinking
(1 sec Interval)
(1 sec Interval)
(1 sec Interval)
Standby Mode
Power-off Mode
Position A2
Inactive
◆ This monitor automatically returns to normal operation when horizontal and vertical sync return.
◆ This occurs when moving the computer’s mouse or pressing a key on the keyboard.
◆ For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long
periods.
41
BN68-00654A-01Eng
4/19/04
4:13 PM
Page 42
Troubleshooting: Before Contacting Service Personnel
ENG
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
PDP and contact your local dealer.
No sound or picture
◆
◆
◆
◆
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the remote control has
been pressed.
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the video system selected is correct.
Sound and picture interference
◆ Plug your PDP into a different mains socket.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the ON or OFF button.
Check the picture contrast and brightness settings.
Check the volume.
Care and Maintenance
◆ Identifying Problems
- Do not put the PDP near extremely hot, cold, humid or dusty places.
- Do not put the PDP near appliances that create magnetic fields.
- Keep the ventilation openings clear.
- Do not place the PDP on a rough and slanted surface, such as cloth or paper.
◆ Liquids
Do not place liquids near or on the PDP.
◆ Cabinet
- Never open the cabinet or touch the parts inside.
- Wipe your PDP with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
- Do not put heavy objects on top of the cabinet.
◆ Temperature
If your PDP is suddenly moved from a cold to a warm place, unplug the power cord for at least two
hours so that moisture that may have formed inside the unit can dry completely.
42
BN68-00654A-02Eng
5/3/04
9:20 AM
Page 43
Technical Specifications
ENG
Exterior design and product specifications are subject to change without prior notice to improve the
performance of this product.
PPM42S3Q/PPM50H3Q :
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures. (Class A product only)
PPM63H3Q :
This PDP applies to Class B digital device for home use. This PDP has been registered for residential use
in terms of EMI. So it can be used in all areas as well as residential areas.
Dimensions
(W x D x H)
PPM42S3Q - 1027 x 79 x 630.5 mm ; 40.43 x 3.11 x 24.82 inches
PPM50H3Q - 1204.6 x 79 x 724 mm ; 47.43 x 3.11 x 28.5 inches
PPM63H3Q - 1503.4 x 89 x 893.8 mm ; 59.19 x 3.5 x 35.19 inches
Weight
(Without stand)
PPM42S3Q - 31kg
PPM50H3Q - 43kg
PPM63H3Q - 69kg
Screen aspect ratio
16:9
Screen size
PPM42S3Q - 42 inch
PPM50H3Q - 50 inch
PPM63H3Q - 63 inch
Native pixel resolution
(H x V)
PPM42S3Q - 852 x 480
PPM50H3Q/PPM63H3Q - 1366 x 768
Color systems
PAL, SECAM, NTSC (NT3.58/NT4.43)
Sound
Stereo, Virtual Dolby
Audio output power
10W + 10W (8Ω)
Power supply
U.S.A/Canada - AC120V~, 60Hz
Other countries - AC100-250V~, 50/60Hz
Power consumption
PPM42S3Q - 330 Watts
PPM50H3Q - 490 Watts
PPM63H3Q - 540 Watts
Video inputs
VIDEO IN - VIDEO/S-VIDEO
COMPONENT1 IN - Y/Pb/Pr (RCA, 3P, 480i~1080i)
COMPONENT2/RGB2(PC2) IN
(BNC, 480i~1080i (Pr/Y/Pb), VGA~XGA (R/G/B/H/V))
RGB1(PC1) IN - D-SUB, 15P
DVI IN - DVI-D type
Monitor outputs
VIDEO OUT - VIDEO/L/R (RCA, 3P)
Audio inputs
VIDEO IN - L/R
COMPONENT1 IN - L/R (RCA, 2P)
AUDIO (Stereo jack for COMPONENT2,RGB1/2(PC1/2), and
DVI input)
Audio outputs
EXT SPEAKER (8Ω) - R-/+, L-/+
External control
RS232C - IN (Stereo jack), OUT (D-SUB, 9P)
43
BN68-00654A-02Eng
5/3/04
9:20 AM
Page 44
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
ELECTRONICS
BN68-00654A-02
Download PDF