Samsung | MM-DG25 | Samsung MM-DG25T User Manual

MM-DG25
PERSONAL MICRO COMPONENT
SYSTEM
user manual
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/global/register
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER (or BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock
or personal injury.
This symbol indicates important instructions
accompanying the product.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
CAUTION
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and shall stay readily operable at any time.
1
Precautions
ENG
PREPARATION
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess heat(e.
g.fireplace) or equipment creating strong magnetic or electric fields (i.
e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
Features
Multi-Disc Playback & FM Tuner
The MM-DG25 combines the convenience of multi-disc playback capability, including
DVD, CD, MP3-CD, CD-R, CD-RW, DivX,JPEG and DVD-R/RW, with a sophisticated
FM tuner, USB HOST all in a single player.
TV Screen Saver Function
The MM-DG25 automatically brightens and darkens the brightness of
the TV screen after 3 minutes in the stop mode.
The MM-DG25 automatically switches itself into the power saving mode
after 20 minutes in the screen saver mode.
Power Saving Function
The MM-DG25 automatically shuts itself off after 20 minutes in the stop mode(only for USB,
DVD).
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
3
Contents
ENG
PREPARATION
PREPARATION
Safety Warnings ................................................................................................................................................................. 1
Precautions......................................................................................................................................................................... 2
Features ............................................................................................................................................................................. 3
Description.......................................................................................................................................................................... 5
CONNECTIONS
Connecting the Speakers ................................................................................................................................................... 9
Connecting the Video Out to your TV ................................................................................................................................. 10
P.SCAN(Progressive Scan) Function ................................................................................................................................. 11
Connecting External Components ...................................................................................................................................... 12
Connecting the FM Antennas ............................................................................................................................................. 13
Setting the Clock ................................................................................................................................................................ 14
Checking the Remaining Time ........................................................................................................................................... 15
OPERATION
Disc Playback ..................................................................................................................................................................... 16
MP3/WMA-CD Playback .................................................................................................................................................... 17
JPEG File Playback ............................................................................................................................................................ 18
DivX Playback .................................................................................................................................................................... 19
Playing Media Files using the USB feature ........................................................................................................................ 21
Displaying Disc Information ................................................................................................................................................ 23
Fast/Slow Playback ............................................................................................................................................................ 24
Skipping Scenes/Songs...................................................................................................................................................... 25
Angle Function.................................................................................................................................................................... 26
Repeat Playback ................................................................................................................................................................ 27
A-B Repeat Playback ........................................................................................................................................................ 28
Zoom Function.................................................................................................................................................................... 29
Selecting Audio/Subtitle Language..................................................................................................................................... 30
Moving Directly to a Scene/Song ....................................................................................................................................... 31
Using Disc Menu ................................................................................................................................................................ 32
Using the Title Menu........................................................................................................................................................... 33
SETUP
Setting the Language ......................................................................................................................................................... 34
Setting TV Screen type....................................................................................................................................................... 35
Setting Parental Controls (Rating Level) ............................................................................................................................ 37
Setting the Password.......................................................................................................................................................... 38
Setting the DRC (Dynamic Range Compression) .............................................................................................................. 39
AV SYNC Setup ................................................................................................................................................................. 40
RADIO OPERATION
About RDS broadcasting ...............................................................................................................................................................................41
Listening to Radio ............................................................................................................................................................... 43
Presetting Stations ............................................................................................................................................................. 44
MISCELLANEOUS
CD RIPPING Function ........................................................................................................................................................ 45
Timer Function.................................................................................................................................................................... 46
Canceling the Timer ........................................................................................................................................................... 47
Power Sound / Treble Level / Bass Level Function ........................................................................................................... 48
DSP/EQ Function / Power Bass Function ......................................................................................................................... 49
Sleep Timer Function / Mute Function................................................................................................................................ 50
DEMO Function / DIMMER Function ................................................................................................................................. 51
Connecting Headphones .................................................................................................................................................... 52
Cautions on Handling and Storing Discs ............................................................................................................................ 53
Before Calling for Service ................................................................................................................................................... 54
Notes on Discs ................................................................................................................................................................... 56
Notes on Terminology ........................................................................................................................................................ 57
Specifications ..................................................................................................................................................................... 58
4
Description
—Front Panel—
5
1
2
1.
2.
3.
3
WINDOW DISPLAY
COMPACT DISC COMPARTMENT
HEADPHONE JACK
4.
5.
4
USB JACK
VOLUME
WHAT’S INCLUDED
Check for the supplied accessories below.
Video Cable
5
FM Antenna
User's Manual
Remote Control
—Top Panel—
ENG
1
2 3 4 5 6
POWER
FUNCTION CHANGE
SEARCH FUNCTION BUTTON(DOWN)
TUNING MODE OR STOP BUTTON
PLAY/PAUSE BUTTON
SEARCH FUNCTION BUTTON(UP)
OPEN/CLOSE
7
—Rear Panel—
1
2
3
4
1. SCART Jack
2. Component Output Connectors
Connect a TV with component video input
jacks to these jacks.
5
6
7
5. FM Antenna Connector
6. Speaker Connector Terminals
7. Clamp-Wire (Fasten the speaker wires.)
3. AUX IN
4. Video Output Connector
Connect the TV's video input jacks (VIDEO
IN) to the VIDEO OUT connector.
6
PREPARATION
1.
2.
3.
4.
5.
6.
7.
Description
—Remote Control—
OPEN/CLOSE button
POWER button
TIMER ON/OFF button
DIMMER button
DVD button
TUNER button
TIMER/CLOCK button
AUX button
USB button
Number(0~9) buttons
RDS SELECTION BUTTON
CD RIPPING button
STEP button
CD Skip buttons
VOLUME button
SHUFFLE button
PAUSE button
Play button
Stop button
SEARCH buttons
MUTE button
TUNING button/Tuning Preset button
AUDIO button
MENU button
RETURN button
Cursor/ENTER button
INFO button
REPEAT button
SUBTITLE button
DSP/EQ button
POWER BASS button
SLEEP button
MO/ST button
SLOW button
ZOOM button
POWER SOUND button
REPEAT A-B button
7
EXIT button
REMAIN button
DEMO button
TUNER MEMORY button
TREB/BASS button
CANCEL button
ANGLE button
ENG
PREPARATION
Insert Remote Batteries
the battery
1 Remove
cover in the direction
of the arrow.
Caution
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 45° from the remote control
sensor.
45
45
8
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and
disconnect the power cord.
The loudspeaker connector terminals are located on the rear of the system.
There are two terminals on the system:
left speaker (marked L)
right speaker (marked R)
To achieve the correct sound quality,insert those speaker connector cables to
the speaker connector terminals of the system.
Position of the DVD Player
• Place it on a stand or cabinet shelf,
or under the TV stand.
Front Speakers
L R
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be
at the same height as your ear.
Directions in Installing Speaker
• Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause
performance degradation of the speaker.
• Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident
caused by falling of the speaker.
• Do not take the speaker near from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
9
Connecting the Video Out to your TV
ENG
Choose one of the four methods for connecting to a TV.
CONNECTIONS
METHOD 2
METHOD 3
(supplied)
METHOD 1
METHOD 1 : Component Video ....... (Best Quality)
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input
jacks on your TV.
METHOD 2 : Scart ....... (Better Quality)
If your television is equipped with an SCART input, connect an Scart Jack (not supplied) from the AV OUT jack on
the back panel of the main unit to the SCART IN jack on your television.
METHOD 3 : Composite Video ....... (Good Quality)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
10
P.SCAN (Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
You can select "Progressive Scan" or "Interlace Scan" for you TV.
Please go to <Setup> <Display Setup> <Video Output> and set I-SCAN or P-SCAN.
(see the page 35.)
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/25th of a second, contains
two interfaced fields, thus a total of 50 fields are
displayed every 1/50th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
• Depending on the brand and model of your TV, this function may not work.
11
Connecting External Components
ENG
Connecting an External Analog Component
(not supplied)
CONNECTIONS
Example: Analog signal components such as a VCR, Camcorder, and TV.
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
1
Connect AUX IN on the player to Audio Out on the external analog component.
2
Press AUX to select AUX.
• Be sure to match connector colors.
• ‘AUX’ appears in the display.
12
Connecting the FM Antennas
FM Antenna (supplied)
1
2
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
Note
13
• This unit does not receive AM broadcasts.
Setting the Clock
ENG
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
2
Press TIMER/CLOCK
twice.
CONNECTIONS
1
Switch the system on
by pressing POWER
button.
• "CLOCK" is displayed.
3
Press ENTER.
The hour flashes.
• Increase the hours :
• Decrease the hours :
5
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
• Increase the minutes :
• Decrease the minutes :
When the correct
time is displayed,
press ENTER.
• "TIMER" appears in the display.
• The current time is now set.
Note
• You can display the time, even when you are using another
•
function, by pressing
TIMER/CLOCK once.
You can also use
buttons in step 3,4.
on the panel front instead of
14
Checking the Remaining
Time
CD
DVD
1
Press the REMAIN
button.
• For checking the remaining time of a
title or chapter being played.
Each time the REMAIN button
is pressed , the time is
displayed as below:
TITLE REMAIN TIME
CHAPTER REMAIN TIME
ELAPSED TIME
15
1
MP3
Press the REMAIN
button.
 If you press the
REMAIN button, the
remaining time is
displayed.
 To cancel this function,
press the REMAIN
button again.
Disc Playback
1
Press OPEN/CLOSE button to open the
disc tray.
Load a disc.
• Place a disc gently into the tray with the disc’s label facing up.
OPERATION
2
3
ENG
Press OPEN/CLOSE button to close the disc
tray.
DVD
CD
• Playback starts automatically.
MP3
DivX
JPEG
• Playback starts automatically.
• If the TV is on, a list of MP3s on the CD will
appear on the TV screen.
Note
• For mixed discs, the play order is as below:MP3/WMA k DIVX kJPEG.
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some MP3-CDs cannot be played.
• For CD discs, you can press the numeric buttons to select the track, when you
press the numeric buttons after 3 seconds, the playback starts automatically.
• Table of contents of a MP3-CD varies depending on the MP3 track format recorded
•
•
on the disc.
DTS Audio is not supported.
DVD Audio Disc is not supported.
To stop playback, press STOP button during playback.
• If pressed once,
the stop position will be stored in memory. If PLAY (
) button
is pressed, playback resumes from the stop position. (This function works only with
DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY (
playback starts from the beginning.
) button is pressed,
To temporarily pause playback, press PAUSE button
during playback.
• To resume playback, press PLAY(
) button again.
16
MP3/WMA-CD Playback
Use
1
Load the MP3/WMA
disc.
• The MP3/WMA menu screen will appear
and playback will start.
2
• Use
to select the album,
and then press the
ENTER button.
to select the track.
• The appearance of the menu depends
on the MP3/WMA disc.
• WMA-DRM files cannot be played.
3
To change the
album, use
to select another
album in Stop mode,
and then press the
ENTER button.
4
Press the STOP
button to stop
playback.
• To select another album and track,
repeat Steps 2 and 3 above.
Note
• Depending on the recording mode, some MP3/WMA-CDs may not be played.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track
format recorded on the disc.
17
JPEG File Playback
ENG
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Rotate/Flip Function
Press Cursor
,
,
,
buttons during playback.
button: Flip Vertically
OPERATION
button: Rotate 90° Clockwise
button: Rotate 90°
Counterclockwise
Original Image
button: Flip Vertically
Zoom/Auto play Function
Press INFO button during playback, TV displays as below:
icon, and then press ENTER button, each time you
press the button, your selection will rotate as clockwise.
icon, and then press ENTER button, each time you
2. Use , to select
press the button, your selection will change as below: x2 k x4 k x2 k Off.
icon, and then press ENTER button, TV displays as
3. Use , to select
below:
1. Use
,
to select
Press ENTER button to select the time space for playing the pictures.
4. Press STOP button to cancel this function.
18
DivX Playback
Skip Forward/Back
During playback, press the
• Go to the next file whenever you press
2 files in the disk.
button.
button, if there are over
• Go to the previous file whenever you press
button, if there are over
2 files in the disk.
Fast playback
Press
button.
• Each time the button is pressed during playback,
the playback speed changes as follow:
• To resume normal playback, press PLAY (
19
) button.
5 Minutes Skip function
During playback, press the
,
button.
• Go to the screen 5 minutes after whenever you press
• Go to the screen 5 minutes earlier whenever you press
Note
ENG
button.
button.
• For MPG format files, 5 minute skip function is not supported.
Audio Display
Press the AUDIO button.
OPERATION
• If there are multiple audio tracks on a disc, you can toggle between them.
• Each time you press the button, your selection will toggle between AUDIO(OFF, 1/1, 1/2 ...).
Subtitle Display
Press the SUBTITLE button.
• Each time you press the button, your selection will changed as below:
KOR
SUBTITLE
Off
SUBTITLE
• If the disc has only one subtitle file, it will be played automatically.
• Up to 8 subtitle languages are supported.
DivX Feature Table
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
SPEC
VIDEO Compatibility
DivX3.11
Up to the latest VERSION
AUDIO Compatibility
MP3
CBR : 8kbps~320kbps
AC3
CBR : 32kbps~640kbps
WMA CBR1:Stereo case:48kbps~384kbps
CBR2:Mono case:64kbps~192kbps
Note
MPEGs containing DivX can be divided into Video and Audio.
• Video compatibility : All versions of DivX later than 3.11 (including
the latest 5.1) are supported. In addition, XviD is supported.
• Audio compatibility : MP3s encoded at bit rates from 8kbps to
320kbps, AC3s from 32kbps to 640kbps, and WMAs from 48kbps to
384kbps are supported.
• In addition, for subtitles, this unit will support Text format (SMI).
• When playing the DivX disk, you can play the file with extension of AVI only.
• Among the available DivX audio formats, DTS Audio is not supported.
• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
• MPEG 1 Layer 3 (MP1) is not supported.
20
Playing Media Files using the USB feature
You can connect and play files from external USB storage devices such as MP3 players,
USB flash memory, etc. using the player's USB function.
1
2
Connect the USB
cable.
Press the FUNCTION
button on the main set
or the USB button on
the remote control to
select the USB mode.
• “USB” appears on the display screen
and then disappear.
•
USB SORTING screen appears on the
TV screen and the saved file is played.
To stop playback, press the STOP (
Note
) button.
• Video files (DivX, MPEG, etc.) are supported.
• To prevent the loss of data saved in the USB device, please turn the unit off or
switch it to another mode before disconnecting the USB cable.
• The play order is as follow: MP3/WMA k DIVX kJPEG.
Skip Forward/Back
During playback, press the
or
• When there is more than a file, when you press the
• When there is more than a file, when you press the
,
,
,
button.
button, the next file is selected.
button, the previous file is selected.
Fast playback
To play back the disc at a faster speed, press
during playback.
• Each time you press either button, the playback speed will change as follow:
x 2
x 4
x 8
or  x 2
• To resume normal playback, press PLAY (
21
x 4
x 8
) button.
or
button
USB Host Specification
USB Host Specification
Non-compliance
Operational Limitations
ENG
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type cable.
• Supports UMS (USB Mass Storage Device) V1.0 compliant devices.
• Supports the device of which the connected drive is formatted in the FAT(FAT, FAT16,
FAT32) file system.
• Does not support a device that requires installing a separate driver on the PC (Windows).
• Does not support connection to a USB hub.
• A USB device that is connected using the USB extension cable may not be recognized.
• A USB device requiring a separate power source needs to be connected to the player
with the separate power connection.
• If the connected device has multiple drives (or partitions) installed, only one drive
(or partition) can be connected.
• A device supporting USB 1.1 alone may cause a difference in the picture quality,
depending on the device.
Compliant Devices
2. MP3 Player
3. Digital Camera
4. Removable HDD
• Removable HDDs equipped with less than 160 Gbytes are supported. Removable HDDs
equipped with 160Gbytes or more may not be recognized, depending on the device.
• If the connected device does not work due to insufficient power supply, you can use a separate
power cable to supply power so that it can work properly. The connector of the USB cable may
differ, depending on the manufacturer of the USB device.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
Compliant File Formats
Format
File name
File extension
Bit rate
Version
Pixel
Sampling
Frequency
Still Picture
JPG
JPG .JPEG
–
–
640x480
–
MP3
.MP3
8~320kbps
–
–
44.1kHz
WMA
.WMA
V8
–
44.1kHz
DivX3.11~
DivX5.1, XviD
720x480
44.1KHz~48KHz
Stereo:48~384kbps
Music
Mono:64~192kbps
Movie
DivX
.AVI
4Mbps
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected to a
PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• MPEG 1 Layer 3 (MP1) is not supported.
22
OPERATION
1. USB Storage Device
Displaying Disc Information
You can view playback information on the disc on the TV screen.
Press INFO button.
• Press Cursor
,
buttons select the desired item.
DVD
Display disappears
Note
• Depending on the disc, the disc
information display may appear different.
• What is a Title?
A movie contained in a DVD disc.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called
"chapters".
•
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being
operated, that operation is not possible with the disc currently being
played.
• What is a Track (File)?
A section of video or a music file recorded on a CD, or MP3-CD.
23
Fast/Slow Playback
Fast Playback
Press
•
DVD
CD
ENG
MP3
buttons .
Each time you press either button during playback, the playback speed changes as follow:
CD
DVD
16
32
32
128
128
OPERATION
16
MP3
• To resume normal playback, press PLAY (
) button.
Slow Playback
Press SLOW button.
• Each time the button is pressed during playback, the playback speed changes as follow:
DVD
DivX
• In Pause mode or Slow mode or Step mode, you can use the
button to select as below:
• To resume normal playback, press PLAY (
Note
) button.
• During fast playback of a CD or MP3-CD, sound is not heard.
• No sound is heard during slow playback and step motion playback.
24
Skipping Scenes/Songs
DVD
MP3
CD
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will
be played.
• But, you cannot skip chapters consecutively.
DVD
MP3
CD
Skip
Track01
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track02
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Skip
Track03
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Playing Frame by Frame
DVD
Press STEP button.
• The picture moves forward one frame each time
the button is pressed during playback.
25
DivX
Step
Angle Function
ENG
This function allows you to view the same scene in different angles.
DVD
1
Press ANGLE
button.
2
Press Cursor ,
buttons or numeric
buttons to select the
desired angle.
• Each time the button is pressed,
1/3
the angle changes as follow:
OPERATION
1/3
2/3
3/3
Note
• The Angle function works only with discs on which multiple angles
have been recorded.
26
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
CD
MP3
DIVX
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback
mode changes as follow:
DVD
• Press the REPEAT button or cursor
,
button to select one mode
then press ENTER button.
•
• Select
• Select
• Select
Select
: Cancel Repeat playback.
: Repeat playback one Chapter.
: Repeat playback one Title.
: Repeat playback A-B.
DIVX
MP3
CD
Track
Track
Track
Folder
Folder
Disc
Off
Disc
Shuffle
Shuffle
Off
Off
Repeat Playback Options
Track
Repeatedly plays the selected track.
Folder
Repeatedly plays all tracks in the
selected folder.
Shuffle
Plays tracks in random order.
(Each track can be played one time.)
Off
Cancels Repeat Playback.
Disc
Repeatedly plays the entire disc.
• For a CD, MP3, DIVX disc, you can press SHUFFLE button to play tracks in
random order.(Each track can be played one time.)
27
A B Repeat Playback
DVD
1
CD
MP3
ENG
DIVX
Press the REPEAT A-B
button at the point where you
want repeat play to start (A).
2
'RPT A-' is displayed.
Press the REPEAT A-B
button at the point where you
want repeat play to stop (B).
'RPT A-B' is displayed.
OPERATION
3
To return to nomal play, press
the REPEAT A-B button again.
'RPT OFF-' is displayed.
• The A-B Repeat function does not operate with JPEG disc.
• The time space of point A and B should be more than 5 seconds.
28
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
DVD
DivX
JPEG
1
Press ZOOM
button.
2
3
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follow:
DVD
DivX
29
JPEG
2x
4x
OFF.
2x
4x
2x
OFF.
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
Press INFO button.
2
DVD
Press Cursor ,
buttons to select the
Audio and then press
ENTER button.
3
Press Cursor ,
or numeric buttons to select the
desired Audio language and then
press ENTER button.
Subtitle Language Selection Function
1
Press INFO button.
2
disc, a different audio language (ENGLISH,
SPAIN,FRENCH, etc.) is selected each time the
button is pressed.
DVD
Press Cursor ,
buttons to select the
Subtitle and then press
ENTER button.
3
Press Cursor ,
or numeric buttons to select the
desired Subtitle language and
then press ENTER button.
Note
• You can use the AUDIO or SUBTITLE button on the remote control to select an audio or subtitle language.
• Depending on the disc, the Subtitle and Audio Language functions may not work.
• When you use AUDIO button to select "DTS", sound is not heard, and the TV displays as below:
CHI DOLBY DIGITAL 5.1 CH
AUDIO
30
OPERATION
• Depending on the number of languages on a DVD
Note
ENG
Moving Directly to a Scene /Song
DVD
1
Moving to a Title/Chapter
Press INFO button.
Moving to a Title/Chapter
Moving to a Specific Time
Press Cursor ,
or numeric buttons to
select the desired part and
then press ENTER button.
4
Moving to a Specific Time
Note
3
5
31
2
Press the numeric
buttons to select the
desired time and then
press ENTER button.
Press Cursor ,
buttons to select the
Title/Chapter.
Press Cursor ,
buttons to select the
Time.
• You can press
on the
remote control to move directly to the
desired title, chapter.
• Depending on the disc, you may not
be able to move to the selected title or
time.
Using Disc Menu
ENG
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
In stop mode, press
MENU button.
3
Press Cursor ,
buttons to select the
desired item and then
press ENTER button.
OPERATION
Disc Menu
2
Press Cursor , buttons
to move to ‘DISC MENU’
and then press ENTER
button .
Disc Menu
4
Press Cursor ,
, buttons to select
the desired item and
then press ENTER
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
32
Using the Title Menu
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
In stop mode, press
MENU button.
2
Press Cursor ,
button to move to
‘Title Menu’ and
then press ENTER
button .
4
Press Cursor ,
, buttons to select
the desired item and
then press ENTER
button.
Disc Menu
3
Press Cursor ,
buttons to select the
desired item and then
press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
33
Setting the Language
ENG
OSD language is set to English by default.
1
In stop mode, press
MENU button.
2
Press Cursor ,
button to move to
‘Setup’ and then
press ENTER button.
3
Press Cursor ,
button to select the
desired item and then
press ENTER button.
Disc Menu
OPERATION
4
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language
was set to English, OSD will be displayed in
English.
Selecting the
OSD Language
Selecting the
Disc Menu Language
(recorded on the disc)
Selecting the
Audio Language
(recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
Selecting the Subtitle Language
(recorded on the disc)
language will not change even if
you set it to your desired
language.
Selecting the Subtitle Language
(recorded on the disc)
Press MENU or EXIT button to exit the setup screen.
Press RETURN button to return to the previous level.
34
Setting TV Screen type
1
In stop mode, press
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor ,
button to 'Tv Aspect'
and then press
ENTER button.
Disc Menu
3
Press Cursor ,
button to move to
‘Display Setup’ and
then press ENTER
button.
• You can select '4:3 Letter Box', '4:3
Pan&Scan' or '16:9 Wide' mode for
your TV.
5
Press Cursor ,
button to move to
‘Screen Messages’
and then press
ENTER button.
• You can select 'On' or 'Off'.
On: you can see the screen messages.
Off: you can't see the screen messages.
35
6
Press Cursor ,
button to 'Video
Output' and then
press ENTER button.
• You can select 'I-SCAN' or 'P-SCAN'.
(see the page 11 about P-SCAN or
I-SCAN mode.)
ENG
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
16:9 Wide
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
4:3LB
(4:3 Letter box)
(4:3 Pan&Scan)
Note
• Black bars will appear at the top and bottom of the screen.
SETUP
4:3PS
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
36
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
In stop mode, press
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor button
to move to ‘Parental
Setup’ and then press
ENTER button.
Disc Menu
4
Press Cursor , button
to select the 'Rating Level'
and then press ENTER
button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
Note
• This function works only if a DVD disc
contains the rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
37
Press EXIT button to exit the setup screen.
Setting the Password
ENG
You can set the password for the Parental (rating level) setting.
1
In stop mode, press
MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor , button
to select the 'Change
Password' and then press
ENTER button.
Disc Menu
5
Enter the password
and then press
ENTER button.
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
Press RETURN button to return to the previous level.
Press CANCEL button to cancel the error numeric when you inputting password.
Press MENU button to exit the setup screen.
38
SETUP
3
Press Cursor button to
move to ‘Parental
Setup’ and then press
ENTER button.
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
In stop mode, press
MENU button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
Disc Menu
3
Press Cursor , button
to select the 'DRC' and
then press ENTER button.
4
Press Cursor ,
adjust the ‘DRC’.
to
• You can set the DRC between 0 and 8.
Set it to the optimal status.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
39
Press EXIT button to exit the setup screen.
AV SYNC Setup
ENG
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
In stop mode, press
MENU button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
Disc Menu
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press
the ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
40
SETUP
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
About RDS broadcasting
Using the RDS (Radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations
send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS service,the RDS
indicator lights up on the display.
Description on RDS function
• PTY (Program Type) : Displays the type of programme currently being broadcast
• PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed
of 8 characters.
• RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum
64 characters.
• CT (Clock Time) : Decodes the real time clock from the FM frequency.
Some stations may not transmit PTY, RT or CT information therefore this may
not be displayed in all cases.
• TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in
progress.
• RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if
the signal strength is weak.
TO show the RDS signals
You can see the RDS signals the station sends on the display.
Press the RDS DISPLAY button while listening to an FM station.
• Each time you press the button, the display change to show you the following information:
PS NAME
RT
CT
Frequency
• PS (Program Service) : While searching, "PS" appears and then the station names will be
displayed. "NO PS" appears if no signal is sent.
• RT(RadioText) : while searching, "RT" appears and then text messages the station sends will be
displayed. "NO RT" appears if no signal is sent.
• Frequency : station frequency (non-RDS service)
About characters shown in the display
When the display shows PS,or RT signals,the following characters are used.
• The display window cannot differentiate upper case and lower case letters and always uses upper
case letters.
• The display window cannot show accented letters, “A,” for instance, may stands for accented
“A’s” like “À, Â, Ä, Á, Å and Ã.”
41
• If searching finishes at once, “PS”, and “RT” will not appear on the display.
PTY (Program Type) indication and PTY-SEARCH function
ENG
One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by
specifying the PTY codes.
To search for a program using the PTY codes
Before you start, remember...
• The PTY Search is only applicable to preset stations.
• To stop searching any time during the process, press STOP while searching.
• There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.
1
2
3
Press the PTY SEARCH while listening to an FM station.
Press the PTY- or PTY+ until the PTY code you want appears on the display.
• The display gives you the PTY codes described to the right.
Press the PTY SEARCH again, while the PTY code selected in the auto
Frequency is still on the display.
• If search the same “PTY” , it will stop. If there is no the same “PTY”, it will
search a round then stop at the beginning.
Program Type
Display
NEWS
AFFAIRS
INFO
News including an announced opinion and
report
Several matters including a current incident,
documentary, discussion and analysis.
Information including weights and measures,
returns and forecast, matters interesting the
customer, medical information, etc.
Sports
Display
Program Type
CLASSICS
Heavy classical music-Orchestra music,
symphony, chamber music and opera
OTHER M
Other music - Jazz, R&B country music
WEATHER
Weather
FINANCE
Finance
CHILDREN
Children’s programmes
Education
SOCIAL A
Social affairs
Drama-Radio serial, etc.
RELIGION
Religion
Culture-National or local culture including the
religious problem, social science, language,
theater,etc.
PHONE IN
Phone in
CULTURE
TRAVEL
Travel
SCIENCE
Natural science and technology
LEISURE
Leisure
SPORT
EDUCATE
DRAMA
VARIED
Others-Speech, amusing program (quiz, game),
interview, comedy and satirical play, etc.
POP M
Pop music
ROCK M
M.O.R.M
LIGHT M
Rock music
Current contemporary music considered to be
“easy listening.”
Light classical music- Classical music and
instrumental and chorus music
JAZZ
Jazz Music
COUNTRY
Country Music
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
DOCUMENT
Documentary
42
Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
Remote Control Unit
1
Press TUNER
button.
2
Tune in to the
desired station.
Press the STOP ( ) button
to select PRESET and then
button to select
press TUNING or
the preset station.
Automatic Tuning 1
Press the STOP ( ) button to
select "AUTO" and then press
TUNING
or
button to automatically
search the band.
Automatic Tuning 2
Press STOP ( ) to select
Manual Tuning MANUAL
and then briefly press
TUNING
to tune in to a lower or
or
higher frequency.
Main Unit
1
Press the TUNER
button to select the
FM band.
2
Select a broadcast
station.
Automatic Tuning 1
press
station.
Press the STOP ( ) button
to select PRESET and then
button to select the preset
Press the STOP ( ) button to
select "AUTO" and then press
button to automatically search the
Automatic Tuning 2
band.
Press STOP ( ) to select
Manual Tuning MANUAL
and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
43
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Presetting Stations
ENG
You can store up to:
15 FM stations
Example: Presetting FM 89.1 in the memory
1
Press the TUNER
button and select
the FM band.
2
Press TUNING
or
to select
"89.10".
3
Press the TUNER
MEMORY button.
• Refer to Step 2 on page 43
to automatically or manually
tune in to a station.
MHz
kHz
kHz
Press TUNING
or
to select
preset number.
• You can select between 1 and
15.
MHz
5
Press the TUNER
MEMORY button.
6
To preset another
station, repeat
steps 2 to 5.
• If you can’t press “TUNER MEMORY” in 5
seconds, the preset disappears and “FM”
displays.
MHz
kHz
kHz
44
RADIO OPERATION
4
MHz
MHz
kHz
CD RIPPING Function
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
1
Switch the system
on by pressing
POWER.
4
Press CD
RIPPING button
on remote control
to starting ripping.
2
5
¡ If the system is playing state, press this button,
“TRACK RIPPING” is displayed and CD
RIPPING starts.
¡ If the system is playing state, press and hold this
button, “FULL CD RIPPING” is displayed and CD
RIPPING starts.
¡ During CD ripping, do not disconnect USB
device.
Connect the
USB.
To stop ripping, press
STOP( )button.and
then automatically
create and save as
the MP3 file.
After CD-Ripping,a directory named
“RIPPING FOLDER” will be created in your
device.The file name is same with the disc.
Note
◆ Don’t disconnected USB and AC Cord during CD-Ripping. This may cause
the file damage. If you want to stop CD-Ripping during CD-Ripping, you must
press stop Key first and after the CD Stopped, then you can remove the USB
device.
◆ If you disconnected USB device when CD Ripping, the main unit will be
power off and you may not delete the ripped file, In this case, please connect
the USB on the PC and backup the USB data on the PC first and then
formate the USB device .
◆ When the USB memory is not enough, it will be displayed “RIPPING
ERROR”.
◆ DTS-CD can’t for CD Ripping.
◆ With external HDD, FAT format the USB can be CD Ripping, but not NTFS.
The CD Ripping function of this product does not support all USB devices.
◆ When you use CD high speed search function or in the Pause or Stop mode,
the CD Ripping can’t work.
◆ During CD Ripping, do not deal impact.If is shocked while CD Ripping, CD
Ripping maybe disengage.
◆ Sometimes, some of USB devices, CD Ripping time is long.
◆ In program mode, you can't use CD RIPPING function.
◆ When CD Ripping completes or Stops, the CD will reload.
45
3
Load a compact
disc(Digital
Audio).
Press the OPEN/CLOSE button to open
the CD door.
Insert a CD and press the OPEN/CLOSE
button to close the CD door.
Use the CD selection (
to select the desired song.
) buttons
Timer Function
ENG
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
1
2
Switch the system
on by pressing
POWER.
Press TIMER/
CLOCK until
TIMER is
displayed.
3
Press the ENTER
button.
• ON TIME is displayed (instead
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
4
5
Set the timer
switch-on time.
a. Set the hour by pressing
button.
b. Press ENTER .
• The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
or
a. Set the hour by pressing
button.
b. Press ENTER.
or
• OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switchoff time already set; you can now
set the timer switch-off time.
7
Press or button
to select the source to
be played when the
system switches on.
6
Set the timer
switch-off time.
• The source to be selected is
or
• The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
Press or button
to adjust the volume
level and press
ENTER.
displayed.
or
• VOL 10 is displayed, where 10
corresponds to the volume
already set.
8
Press ENTER to
confirm the timer.
• TUNER (radio) :
Note
• If the timer switch on and off times are identical, the word ERROR is displayed.
• If there is no disc or usb, when you select the “DVD, USB, it will automatically change to
“TUNER”.
46
MISCELLANEOUS
a Press ENTER.
b Select a preset station by pressing
or .
• DVD/CD (compact disc) :
Load on or more compact disc.
• USB :Insert a USB.
Canceling the Timer
After having set the timer, it will start automatically as shown by the TIMER indication on the
display. If you no longer wish to use the timer, you must cancel it.
To cancel the timer, press TIMER
ON/OFF once.
•
is no longer displayed.
To resume the timer, press TIMER
ON/OFF again.
•
47
is displayed again.
ENG
Power Sound/Treble
Level/Bass Level Function
POWER SOUND Function
Your micro-compact system is equipped with the function of POWER SOUND
mode .
The function of POWER SOUND mode amplifies bass and improves high key or
bass twice as much for you to appreciate powerful real sound.
Press the P.SOUND button.
When CD Ripping,the P.SOUND function
can’t work and the P.SOUND automatically covert
to “OFF” mode.
Result: “P.SOUND” is displayed.
To cancel this function, press P.SOUND again, “OFF”
is displayed for a few seconds.
Treble Level Function
Treble Control function stresses high tones providing
thudding sound effects.
Press TREB/BASS button ,
TREB 00 is displayed.
• Press the
button to select from TREB -04 to
TREB 04.
•You can select the level of high tones you desire.
Bass Level Function
BASS function stresses low tones providing thudding sound
effects.
• Press the
BASS 04.
button to select from BASS -04 to
•You can select the level of low
tones you desire.
48
MISCELLANEOUS
Press TREB/BASS button ,
BASS 00 is displayed.
DSP/EQ Function / Power Bass
Function
Selecting DSP/EQ
Your micro-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
Press DSP/EQ on the remote control until
the required option is selected.
To obtain a...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for class
Balance suitable for jazz
Balance suitable for s.bass
Select...
PASS
POP
ROCK
CLASSIC
JAZZ
S.BASS
When CD Ripping,the DSP/EQ function can’t work and the
DSP/EQ automatically covert to “PASS” mode.
Selecting Power Bass
Your micro-compact system has a bass amplification function
called SBS (Super Bass Sound). This function makes the sound
more powerful and real.
Press P.BASS button on the remote
control.
Result: “P. BASS” is displayed.
To cancel this function, press P.BASS again, “OFF” is
displayed for a few seconds.
When CD Ripping,the P.BASS function can’t work and the P.BASS
automatically covert to “OFF” mode.
49
Sleep Timer Function / Mute Function
ENG
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• Each time the button is pressed, the selection changes as follows:
90 MIN
60 MIN
45 MIN
30 MIN
15 MIN
SLEEPOFF.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
the button again changes the sleep time from what you have set
•Pressing
earlier.
To cancel the sleep timer, press SLEEP button until
SLEEPOFF appears on the display.
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
buttons.
50
MISCELLANEOUS
• ‘MUTE ’ appears in the display.
• To switch the sound back on , press MUTE again or press the VOLUME
DEMO Function / DIMMER Function
DEMO Function
You can view the various functions available on your system.
Press DEMO button.
• The various functions available are listed in turn on the display.
• All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sections.
DIMMER Function
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press DIMMER button.
• Each time the button is press, the brightness changes as follows:
DIMMER ON(Dim)
DIMMER OFF(Bright).
Note
Press any buttons to cancel DEMO function.
51
Connecting Headphones
ENG
You can connect a set of headphones to your micro component system so that you can listen
to music or radio programmers without disturbing other people in the room. The headphones
must have a 3.5ø jack or an appropriate adapter.
Connect the headphones
to the PHONES jack on
the front panel.
Note
• Prolonged use of headphones at a high volume may
damage your hearing.
• The loudspeakers are no longer used to
output the sound.
MISCELLANEOUS
52
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
53
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
Before Calling for Service
ENG
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
•
•
The remote control does
not work.
Playback does not start
immediately when the Play/
Pause button is pressed.
Sound is not produced.
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Make sure that the rating level is correct.
• Is the remote control being operated within its operation range of
angle and distance?
• Are the batteries exhausted?
• Are you using a deformed disc or a disc with scratches on
•
the surface?
Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
•
•
motion playback.
Are the speakers connected properly? Is the speaker setup
correctly customized?
Is the disc severely damaged?
Picture does not appear, sound • Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
is not produced, or the disc
and let the player stand for 1 or 2 hours with the power on. (You
tray opens 2 to 5 seconds later. can use the player again after condensation disappears.)
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
54
MISCELLANEOUS
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Symptom
Check/Remedy
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
them. And depending on the disc, they may work differently.
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
The password for rating
level has been forgotten.
55
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
antenna in an area with good reception.
• Turn off the power and hold the STOP
for longer than 5 seconds.
button on the main unit
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While the player is in the No Disc mode, hold the main unit's STOP
button for longer than 5 seconds. “INITIAL” appears on the display and
all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Notes on Discs
ENG
Disc Recording Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
the disc.
• Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minute as they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be
able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc
can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~
320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc
can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
• Software updates for incompatible formats are not supported.
(Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.)
• Sections with a high frame rate might not be played while playing a DivX file.
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX
Ultra Certified device that plays DivX video.
56
MISCELLANEOUS
DVD R/RW, CD-R/RW DivX Discs
Notes on Terminology
ANGLE
CHAPTER
NUMBER
DVD
PCM
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
TRACK NUMBER
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
57
Specifications
ENG
RADIO
FM
Signal/noise ratio
62 dB
Usable sensitivity
10 dB
Total harmonic distortion
0.4 %
COMPACT DISC PLAYER
Capacity
1 disc
Frequency range
20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio
90 dB (at 1 KHz) with filter
Distortion
0.1 % (at 1 KHz)
Channel separation
75 dB
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
AMPLIFIER
Output power
Front Speaker(4 Ω)
60W/CH RMS,IEC (total harmonic distortion: 10 %)
Channel separation
60 dB
Signal/noise ratio
70 dB
GENERAL
Power consumption
35W
Dimensions
230(D) x 154 (H) x 251 (W) mm
Weight
2.2 Kg
MISCELLANEOUS
58
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Region
Country
Customer Care Center
Web Site
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed
of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If
batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature,indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal,please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product,or their local government
office,for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.This
product should not be mixed with other commercial wastes for disposal.
AH68-02158K
Download PDF