Samsung | MAX-DC640 | Samsung MAX-DC640 User Manual

3 DVD MINI
COMPONENT SYSTEM
DVD/VCD/CD/MP3-CD/CD-R/RW
PLAYBACK
THIS APPLIANCE IS MANUFACTURED BY:
MAX- DC640
Instruction Manual
MONO/ST
CD SYNCHRO
COMPACT
VIDEO
AH68-01670C
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUCT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE REAR COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Precautions
PREPARATION
Safety Warnings
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
THIS APPLIANCE IS FITTED WITH 220V SASO APPROVED PLUG. THE CUSTOMER
IS ENTITLED TO A FREE SASO APPROVED 127V PLUG FROM THE LOCAL DEALER.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
1
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
Contents
PREPARATION
Features
PREPARATION
Multi-Disc Playback & AM/FM Tuner, TAPE
The MAX-DC640 combines the convenience of multi-disc playback
capability, including DVD, CD, MP3-CD, CD-R, CD-RW,VCD,DivX,JPEG and
DVD-R/RW, with a sophisticated AM/FM tuner, TAPE, all in a single player.
TV Screen Saver Function
The MAX-DC640 automatically brightens and darkens the brightness of
the TV screen after 3 minutes in the stop mode.
The MAX-DC640 automatically switches itself into the power saving
mode after 20 minutes in the screen saver mode.
Power Saving Function
The MAX-DC640 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
The MAX-DC640 allows you to select your favorite image during JPEG,
DVD playback and set it as your background wallpaper.
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Description ..........................................................................................................................................................................5
CONNECTIONS
Connecting the Speakers....................................................................................................................................................9
Connecting to a TV .............................................................................................................................................................10
P.SCAN(Progressive Scan) Function .................................................................................................................................12
Connecting External Components ......................................................................................................................................13
Connecting the FM,AM(MW)and SW(option) Antennas .....................................................................................................14
Setting the Clock.................................................................................................................................................................15
OPERATION
Disc Playback .....................................................................................................................................................................16
DivX Playback.....................................................................................................................................................................17
Displaying Disc Information ................................................................................................................................................19
Fast/Slow Playback.............................................................................................................................................................20
Skipping Scenes/Songs ......................................................................................................................................................21
Angle Function ....................................................................................................................................................................22
Repeat Playback.................................................................................................................................................................23
A-B Repeat Playback.........................................................................................................................................................25
Zoom Function ....................................................................................................................................................................26
Selecting Audio/Subtitle Language .....................................................................................................................................27
Moving Directly to a Scene/Song........................................................................................................................................28
JPEG File Playback ............................................................................................................................................................29
Using Disc Menu.................................................................................................................................................................31
Using the Title Menu ...........................................................................................................................................................32
SETUP
Setting the Language..........................................................................................................................................................33
Language Code List............................................................................................................................................................34
Setting TV Screen type .......................................................................................................................................................35
Setting Parental Controls (Rating Level).............................................................................................................................37
Setting the Password ..........................................................................................................................................................38
Setting the Wallpaper..........................................................................................................................................................39
Setting the DRC (Dynamic Range Compression)...............................................................................................................41
AV SYNC Setup..................................................................................................................................................................42
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................43
Presetting Stations..............................................................................................................................................................44
TAPE DECK
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
•
3
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Listening to a Cassette .......................................................................................................................................................45
MISCELLANEOUS
Recording a Compact Disc .................................................................................................................................................48
Recording a Radio Program ...............................................................................................................................................50
Timer Function ....................................................................................................................................................................51
Canceling the Timer............................................................................................................................................................52
P.SOUND/SURROUND/SURROUND XT/LATIN SOUND Function ................................................................................53
Sleep Timer Function / Mute Function ................................................................................................................................54
DEMO Function / DIMMER Function ..................................................................................................................................55
Connecting Headphones/Microphone(option) ....................................................................................................................56
Cautions on Handling and Storing Discs ............................................................................................................................57
Before Calling for Service ...................................................................................................................................................58
Notes on Discs....................................................................................................................................................................60
Notes on Terminology.........................................................................................................................................................61
Specifications......................................................................................................................................................................62
4
PREPARATION
Description
—Front Panel—
30
29
28
1.
2.
3.
4.
5.
6.
7.
8.
9.
27
1
26
2
3
25
4
5
24
6
23
7
8
22
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
9 10 11 12
STANDBY/ON
FUNCTIONS SELECT BUTTONS
DEMO/DIMMER
ECHO
MIC LEVEL(Option)
MIC(Option)
PHONES
CASSETTE DECK 1
SEARCH FUNCTIONS BUTTONS
TUNING MODE OR STOP BUTTONS
REC/PAUSE
DUBBING
CD SYNCHRO
TAPE 1/2
TIMER/CLOCK
REVERSE MODE
TIMER ON/OFF
COUNTER RESET
TUNER MEMORY
FM MONO/ST
SOUND MODE
ENTER
CASSETTE DECK 2
SLEEP
MULTI JOG
POWER SOUND/SURROUND
XT/SURROUND
VOLUME+,-
27.
CD Open/Close
28.
29.
30.
DISC CHANGE
DISC SELECTION BUTTONS
WINDOW DISPLAY
1
2
1.
2.
3.
4.
5.
6.
If the TV is equipped with an S-Video input
connector (S-VIDEO IN), connect it to the
player's S-Video output jack.
3
RADIO ANTENNA
4
7. Video Output Connector
Connect the TV's video input jacks (VIDEO IN) to
the VIDEO OUT connector.
5
6
7
8
SPEAKERS OUT (6
)
+
-
SW Antenna Connector (Option)
FM Antenna Connector
AM Antenna Connector
AUX-Input
LINE OUT
S-Video Output Connector
8. Component Video Output Connectors
Connect a TV with component vide input jacks to
these jacks.
9. Speaker Connector Terminals
10. Voltage Selector (Option)
9
110V~
127V
220V~
240V
10
13 1415 16 1718 19 20 21
—Display Window—
Accessories
OPEN/
CLOSE
DISC
SLEEP
SKIP
DIMM
ER
ZOOM
REPEA
T
REMA
DECK IN
1/2
TUNER
BAND
TAPE
SLOW
SUB
TITLE
AUX
SOUN
MODE D
VOLUM
E
TUNIN
G
TUNN
MEMO ER
RY
MUTE
MENU
P.SCAN
ENTER
RETURN
FM MODE (STEREO)
POWER SURROUND
Volume
TITLE
POWER SOUND
TAPE 1/2
TAPE RUNNING DIRECTOR
TAPE REVERSE MODE
PLAYING DISC NUMBER
MAIN DISPLAY(FUNCTION,FREQUENCY,TIME,etc.)
CD SYNCHRO RECORDING
RECORDING
PBC
TUNER FREQUENCY UNIT
CLOCK
SLEEP
CD PLAYING DISC MODE OR CD
REPEAT MODE
18. CD PROGRAM OR TUNER MEMORY
TO PROGRAM
19. TUNER PRESET
20. CD PROGRAM AND TUNER PRESET NUMBER
21. CHAPTER
INFO
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11
12.
13.
14.
15.
16.
17.
5
—Rear Panel—
AUDIO
TIMER/C
LOCK
TIMER
ON/OFF
EZ/VIEW
NTSC/P
AL
STEP
CANCE
L
DIGEST
LOGO
SLIDE
MODE
Remote Control
AM Antenna
Video Cable
User's Manual
FM Antenna
6
PREPARATION
Description
—Remote Control—
Insert Remote Batteries
1
TAPE PLAY button
POWER button
TUNER / BAND button
SLEEP button
REMAIN(TAPE 1/2) button
CANCEL button
OPEN/CLOSE button
AUX button
DISC SKIP button
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
2
3
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
Replace the battery
cover.
Number(0~9) buttons
DIMMER/DEMO button
Play/Pause button
Stop button
Tuning Preset/CD Skip button
VOLUME button
LATIN SOUND button
MENU button
RETURN button
TUNING button
TUNER MEMORY / P. SCAN button
INFO button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
MUTE button
Direction/Enter button
AUDIO button
REPEAT A<->B button
TIMER/CLOCK button
SUB TITLE button
TIMER ON/OFF button
STEP button
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
USB
SLIDE MODE button
LOGO button
EZ/VIEW(NTSC/PAL) button
DIGEST button
ZOOM button
SLOW(MONO/ST) button
REPEAT button
MONO/ST
7
8
Connecting the Speakers
Connecting to a TV
Please be sure to turn off the power and unplug the power cord before moving or
installing this unit.
Please choose one of three video connection methods.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connect the connecting jacks (2) to the back of mini-compact system.
Method 1
Using Video Out (Good Quality)
( supplied)
RADIO ANTENNA
1
SPEAKERS OUT (6
Connect Video Out on the player to Video
In on your TV.
)
RADIO ANTENNA
110V~
127V
220V~
240V
2
Press the TV/VIDEO button on the remote
of TV control to set the TV to "VIDEO".
SPEAKERS OUT (6
)
110V~
127V
220V~
240V
SPEAKERS OUT (6
)
Position of the DVD Player
• Place it on a stand or cabinet shelf,
or under the TV stand.
Speakers L R
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be
at the same height as your ear.
Method 2 Using S-Video Out (Better Quality)
Use this method if your TV has an S-Video In jack.
1
Connect S-Video Out to S-Video In on
your TV.
2
Press the TV/VIDEO button on the remote
control of TV to set the TV to "S-VIDEO".
RADIO ANTENNA
(not supplied)
SPEAKERS OUT (6
)
110V~
127V
220V~
240V
Directions in Installing Speaker
• Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause
performance degradation of the speaker.
• Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident
caused by falling of the speaker.
• Do not take the speaker near from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
9
Note
• Composite Video: A single video signal that is a composite of the blackand-white information (Y) and the color information (C).
• S-Video: A video transmission standard that provides a sharper, brighter
picture than ordinary composite video by separating brightness and color
signals.
10
CONNECTIONS
Make sure the polarities (+and -) are correct.
P.SCAN (Progressive Scan) Function
Connecting to a TV(Con’t)
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
Please be sure to turn off the power and unplug the power cord before moving
or installing this unit.
Please choose one of three video connection methods.
Method 3
repetitively.
Use this method if your TV have Pr,Pb andY jacks.
If you television is equipped with Component Video inputs,connect a component
video cable from the Pr,Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
Progressive Scan (FULL FRAME)
RADIO ANTENNA
COMPONENT
IN
SPEAKERS OUT (6
)
(not supplied)
110V~
127V
220V~
240V
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
Selecting the Video Format
Turn off the main unit and then press NTSC/PAL on the Remote Control or REC/PAUSE on the Main Unit.
• By default, the video format is set to "PAL".
• Each time the button is pressed, the video format switches between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.
11
12
CONNECTIONS
Press and hold P.SCAN button on the remote controller for over 5 seconds in stop
mode.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
Component Video (Best Quality)
Connecting External Components
Connecting the FM, AM(MW) and SW(option)Antennas
Connecting an External Analog Component
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
Example: Analog signal components such as a VCR, Camcorder, and TV.
AM Loop Antenna
(supplied)
RADIO ANTENNA
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
RADIO ANTENNA
RADIO ANTENNA
SPEAKERS OUT (6
(not supplied)
RADIO ANTENNA
SPEAKERS OUT (6
)
110V~
127V
220V~
240V
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
2
Press AUX to select AUX.
)
Spread the SW aerial out and attach the
ends to a wall, in the position providing the
best reception.
If reception is poor (e.g. distance from
transmitter too great, walls blocking the
radio waves, etc.), install an outdoor aerial.
AM (MW) antenna connection
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
• Be sure to match connector colors.
• ‘AUX’ appears in the display.
13
14
CONNECTIONS
FM Antenna (supplied)
Setting the Clock
Disc Playback
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system on
by pressing
STANDBY/ON button.
2
Press TIMER/CLOCK
twice.
• CLOCK is displayed.
3
Selecting a CD in the Disc changer
Press ENTER.
The hour flashes.
To select a specific disc, press the corresponding DISC (1, 2, 3) button on the front panel
or DISC SKIP on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
• Increase the hours :
• Decrease the hours :
• If you use the DISC (1, 2, 3) function when listening to the radio or to a tape, the
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
5
• Increase the minutes :
• Decrease the minutes :
Note
•You
When the correct
time is displayed,
press ENTER.
• You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK once.
• "TIMER" appears in the display.
• The current time is now set.
can also use Muti-Jog or
buttons in step 3,4.
DVD
VCD
CD
• Playback starts automatically.
button on the panel front instead of
MP3
JPEG
DivX
• Playback starts automatically.
• If the TV is on, a list of MP3s on
Press the REMAIN button.
Note
• For checking the total and remaining time of a title or chapter being played.
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
• Depending on the content of the disc, the initial screen may appear different.
• Depending on the recording mode, some MP3-CDs cannot be played.
• Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
Each time the REMAIN button is pressed
TRACK ELAPSED
TRACK ELAPSED
To stop playback,
press STOP during playback.
TITLE REMAIN
TRACK REMAIN
TRACK REMAIN
• If pressed once, “PRESS PLAY” is displayed and the
CHAPTER ELAPSED
TOTAL ELAPSED
CHAPTER REMAIN
TOTAL REMAIN
VCD
TITLE ELAPSED
CD
MP3
To temporarily pause playback,
press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE
button again.
15
DVD RECEIVER
the CD will appear on the TV
screen.
Checking the Remaining Time
DVD
PREPARATION
system switches automatically to the CD mode.
• If the disc selected is not loaded, the next disc is played automatically.
Note
•
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
16
DivX Playback
5 Minute Skip function
During playback, press the
,
button.
• Go to the screen about 5 minutes after whenever you press
• Go to the screen about 5 minutes earlier whenever you press
Skip Forward/Back
During playback, press the
button.
button.
button.
• Go to the next file whenever you press
button, if there are over
2 files in the disk.
• Go to the previous file whenever you press
button, if there are over
2 files in the disk.
Subtitle Display
Press and hold
• Each time you press the button, your selection will toggle between “SUBTITLE ON” and “SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
• Up to 8 subtitle languages are supported.
button.
• Each time the button is held down during playback,
the playback speed changes as follows:
DivX Feature Table
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
VIDEO Compatibility
DivX3.11
WMV
WMV V1/V2/V3/V7
MPEGs containing DivX can be divided into Video and Audio.
• Video compatibility : All versions of DivX later than 3.11 (including
the latest 5.1) are supported. In addition, XviD is supported.
For WMV, V1, V2, V3, and V7 formats are possible.
AUDIO Compatibility
MP3
CBR : 80kbps~320kbps
• Audio compatibility : MP3s encoded at bitrates from 80kbps to
AC3
CBR : 128kbps~448kbps
WMA
CBR : 56kbps~160kbps
SPEC
Zoom Function
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
Note
17
Note
Up to the latest VERSION
320kbps, AC3s from 128kbps to 448kbps, and WMAs from 56kbps
to 160kbps are supported.
• In addition, for subtitles, this unit will support Text format (SMI).
• When playing the DivX disk, you can play the file with extension of AVI only.
• Among the available DivX audio formats, DTS Audio is not supported.
• WMV V8 is not supported for WMV files.
• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
• DivX files can be played in
Zoom X2 mode only.
18
CONNECTIONS
Press the SUBTITLE button.
Fast playback
Displaying Disc Information
Fast/Slow Playback
You can view playback information on the disc on the TV screen.
Fast Playback
DVD
VCD
Press INFO button.
Press and hold
• Each time the button is pressed, the display changes as follows:
• Each time the button is held down during playback,
VCD
CD
MP3
.
the playback speed changes as follows:
MP3
JPEG
DVD RECEIVER
DivX
OPERATION
DVD
CD
SMART NAVI
Something like you
Back for good
Love of my life
More than words
Display disappears
Display disappears
Slow Playback
Display disappears
Press SLOW button.
• Each time the button is pressed during playback,
• What is a Title?
the playback speed changes as follows:
A movie contained in a DVD disc.
Note
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
• Depending on the disc, the disc
information display may appear different.
• Depending on the disc, you can also
•
select DOLBY DIGITAL, or PRO LOGIC.
DVD
VCD
DivX
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
• What is a Track (File)?
A section of video or a music file recorded on a VCD, CD, or MP3-CD.
Screen Display
DVD display
MP3 CD display
TRACK (FILE) display
AUDIO LANGUAGE display
DOLBY DIGITAL display
VCD display
TITLE display
ELAPSED TIME display
SUBTITLE display
ANGLE display
• Reverse slow playback does not work with VCDs and DivX.
DivX display
• During fast playback of a CD or MP3-CD, sound is heard only at
2x speed, and not at 4x, 8x, and 32x speeds.
Note
CD display
19
CHAPTER display
REPEAT PLAYBACK display
STEREO (L/R) display
• No sound is heard during slow playback and step motion
playback.
20
Skipping Scenes/Songs
Angle Function
This function allows you to view the same scene in different angles.
DVD
VCD
DVD
MP3
Briefly press
1
.
• Each time the button is pressed briefly during playback, the previous or next chapter,
•
track, or directory (file) will be played.
But, you cannot skip chapters consecutively.
VCD
2
Press Cursor
button to move to
ANGLE display.
MP3
1/3
1/3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
3
Press Cursor , buttons or numeric buttons
to select the desired angle.
• Each time the button is pressed, the angle changes as follows:
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
1/3
2/3
3/3
• When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Playing Frame by Frame
DVD
Press STEP button.
• The picture moves forward one frame each time the
button is pressed during playback.
21
Note
• The Angle function works only with discs on which multiple angles
have been recorded.
22
OPERATION
DVD
Press INFO button.
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
DVD
VCD
CD
MP3
CD
To Select a Repeat Playback Mode
in the Disc Information Screen
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
MP3
JPEG
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
1
Press INFO button
twice .
2
Press Cursor button
to move to REPEAT
PLAYBACK display.
•For a VCD or CD,Press INFO
button once.
TITLE
Repeatedly plays the selected title.
RANDOM
Plays tracks in random order.
(A track that has already been played
may be played again.)
3
TRACK
Repeatedly plays the selected track.
VCD
CD
DIR
Repeatedly plays all tracks in the
selected folder.
Press Cursor
button to select the
desired Repeat
Playback mode.
4
Press ENTER
button.
DVD
DISC
Repeatedly plays the entire disc.
OFF
Cancels Repeat Playback.
VCD
CD
Note
• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on.
Note
To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the disc menu. (See page 31.)
• For MP3 and JPEG discs, you cannot select Repeat Play
from the information display screen.
23
24
OPERATION
DVD
VCD
A↔B Repeat Playback
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
DVD
1
VCD
DVD
VCD
CD
REPEAT : A–
2
Press REP. A↔B
at the end of the
section.
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
3
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
REPEAT : A–B
To cancel AB Repeat Playback, press REP. A↔B to
select "REPEAT PLAYBACK: OFF".
SELECT ZOOM POSITION
Aspect Ratio
DVD
REPEAT : OFF
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Wide screen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
Note
• A–B Repeat Playback does not work on MP3 and JPEG discs.
• To select AB Repeat Playback from the information display screen,
press REP. A↔B.
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
25
26
OPERATION
Press REP. A↔B
at the beginning of
the section you
want to repeat.
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
2
Press INFO button
twice.
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
Moving Directly to a Scene/Song
DVD
1
VCD
CD
Moving to a Title/Track
Press INFO button.
2
Moving to a Chapter
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
3
Press Cursor ,
buttons to move to
Chapter display.
DVD disc, a different audio language (ENGLISH,
SPAIN,JAPANESE, etc.) is selected each time
the button is pressed.
SP 2/3
01/05
001/040
0:00:37
1/1
Moving to a Chapter
001/002
03/05
0:00:01
1/1
Moving to a Specific Time
01/05
001/040
0:00:01
1/1
Moving to a Specific Time
FR 3/3
Subtitle Language Selection Function
1
2
Press INFO button
twice.
DVD
4
Press Cursor
button to move to
SUBTITLE display.
01/05
MP3
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
EN 1/3
EN 01/ 03
SP 02/ 03
FR 03/ 03
OFF / 03
27
OFF
Note
• You can use the SUBTITLE button on the
•
remote control to select a subtitle
language.
Depending on the disc, the Subtitle and
Audio Language functions may not work.
Press Cursor , buttons
or numeric buttons to select
the desired chapter and
then press ENTER button.
025/040
0:00:01
5
1/1
Press Cursor ,
buttons to move to
time display.
025/040
01/05
1:17:30
6
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
1/1
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
Move
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
Note
SELECT 03
Select
Stop
• You can press
•
on the remote
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
from the disc information screen.
• When playing an MP3 or JEPG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
28
OPERATION
• Depending on the number of languages on a
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Slide Mode
Digest Function
You can view 9 JPEG images on the TV screen.
1
1
Place the JPEG disc on the disc tray.
Press DIGEST
button during
playback.
2
• The selected image is played for 5 seconds before moving to
9 windows.
2
Press the OPEN/CLOSE button.
• Playback starts automatically.
• Each image is shown for 5 seconds before another image is displayed.
3
the next image.
To view the previous or next image with 9 windows, press
.
Press SLIDE MODE button.
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
Rotate/Flip Function
From top to bottom
Press Cursor
,
,
,
buttons during playback.
From bottom to top
Rectangular shape in the center
button: Flip Vertically
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be randomly and automatically be applied.
29
button: Rotate 90° Clockwise
Original Image
Cancels the slide mode.
Press
button: Rotate 90°
Counterclockwise
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
button: Flip Horizontally
30
OPERATION
• JPEG files will be shown in
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
Using Disc Menu
Using the Title Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
Press MENU button.
• When playing a VCD (version 2.0),
this toggles between PBC ON and
OFF.
2
Press Cursor , buttons
to move to ‘DISC MENU’
and then press ENTER
button.
1
Press MENU button.
2
Press Cursor ,
button to move to
‘Title Menu’.
• When you select the disc menu that is not
• The title menu appears.
supported by the disc, the "This menu is not
supported" message appears on the screen.
4
3
Press ENTER button.
OPERATION
3
Press Cursor ,
, buttons to select
the desired item.
DVD
Press ENTER button.
Press MENU button to exit the setup screen.
Note
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be
disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
31
32
Setting the Language
Language Code List
OSD language is set to English by default.
1
2
Press MENU button.
4
Press Cursor
, button to
select the desired item and then
press ENTER button.
5
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”
and/or “Disc Menu” (See page 33).
Press Cursor
button to
move to ‘Setup’ and then
press ENTER button.
3
Press ENTER button.
Press Cursor
,
button to select
the desired language and then press
ENTER button.
Note
• To select other language, select OTHER
and enter the language code of your
country. (See 34 page for language code
of countries)
AUDIO, SUB TITLE and DISC MENU
language can be selected.
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Press RETURN button to return to the previous level.
33
Press MENU button to exit the setup screen.
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1181
Frisian
1334
Latvian, Lettish
1506
Slovenian
1028
Abkhazian
1183
Irish
1345
Malagasy
1507
Samoan
1032
Afrikaans
1186
Scots Gaelic
1347
Maori
1508
Shona
1039
Amharic
1194
Galician
1349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
1511
Albanian
1045
Assamese
1203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
1209
Hausa
1353
Moldavian
1513
Siswati
1052
Azerbaijani
1217
Hindi
1356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
1357
Malay
1515
Sundanese
1057
Byelorussian
1229
Hungarian
1358
Maltese
1516
Swedish
1059
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
1239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
Turkmen
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1142
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
Selecting the Disc Menu
Language (recorded on the disc)
1166
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
language you selected is
* Ifnottherecorded
on the disc, menu
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
language will not change even
if you set it to your desired
language.
34
SETUP
• Once the setup is complete, if the language was set
to English, OSD will be displayed in English.
Code
Setting TV Screen type
1
Press MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
4:3LB
(4:3 Letter box)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
SETUP
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
• Black bars will appear at the top and bottom of the screen.
4:3PS
(4:3 Pan&Scan)
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
be taken to the previous screen.
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
35
36
1
Setting the Password
Use this to restrict playback of adult or violent DVDs you do not want children to view.
You can set the password for the Parental (rating level) setting.
Press MENU button.
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
1
4
• The password is set to "7890" by default.
• Once the setup is complete, you will be
Press MENU button.
Press ENTER
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
3
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
SETUP
4
Setting Parental Controls (Rating Level)
• Enter the old password, a new
password, and confirm new password.
taken to the previous screen.
• The setting is complete.
Note
• This function works only if a DVD disc
contains the rating level information.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press CANCEL button to cancel the error numeric when you inputting password.
37
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
38
Setting the Wallpaper
JPEG
DVD
While watching a DVD or JPEG CD, you can set the image you like as a wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when the image you
like comes up.
2
To Change the Wallpaper
Press LOGO
button.
1
Press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
• The selected wallpaper will be displayed.
• You can repeat Steps 1 and 2 to set up to
3 wallpapers.
• The power will turn off and turn on
automatically and back on the display
mode.
4
SETUP
Note
Press to select
the desired ‘USER’,
and then press
ENTER.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Select this to set the
Samsung Logo image as
your wallpaper.
39
Select this to set the desired
image as your wallpaper.
40
Setting the DRC (Dynamic Range Compression)
AV SYNC Setup
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
Press MENU button.
2
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
1
Press the MENU button.
• Setup menu appears.
4
Press Cursor ,
adjust the ‘DRC’.
• 'Audio' menu appears.
to
button is pressed, the
• The more times the Cursor
greater the effect, and the more times Cursor
button is
pressed, the smaller the effect.
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
• AV-SYNC screen appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
41
42
SETUP
3
If “DRC” is
selected, press
ENTER.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
Listening to Radio
Presetting Stations
You can store up to:
You can listen to the chosen band (FM, MW, (SW1,2) broadcast stations) by
using either the automatic or manual tuning operation.
Remote Control Unit
1
Example: Presetting FM 89.1 in the memory
2
Press TUNER/
BAND button.
Tune in to the
desired station.
Automatic Tuning 1
• The selection toggles back
and forth between "FM ➝ MW
➝ (SW1,2)" each time the
TUNER(BAND) button is
pressed.
15 FM stations
5 MW stations(or AM 15 stations
5 SW1 stations
(Option)
5 SW2 stations
Automatic Tuning 2
Press
button to select
the preset station.
Press and hold
button to
automatically search the band.
1
Press the
TUNER(BAND)
button and select
the FM band.
2
• Each time the button is pressed,
Press
to
select "89.10".
• Refer to Step 2 on page 41
the band switches between
"FM ➝ MW ➝ (SW1,2)".
to automatically or manually
tune in to a station.
MHz
Manual Tuning
Press the TUNER
MEMORY button.
• “PROGRAM” flashes in the
display.
PROGRAM
MHz
kHz
Briefly press
3
MHz
kHz
kHz
button to
increase or decrease the frequency incrementally.
Main Unit
2
Select a broadcast
station.
Press the STOP ( ) button
to select PRESET and then
press
button or turn Multi Jog
Knob to select the preset station.
Automatic Tuning 1
Press the STOP ( ) button to
select "AUTO" and then press
and hold
button or turn Multi-Jog
Knob to automatically search the band.
4
Press
to
select preset
number.
5
• You can select between 1 and
Press the TUNER
MEMORY button.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
‘PROGRAM’ disappears from the display.
15.
• ‘PROGRAM’ disappears from the display
and the station is stored in memory.
Automatic Tuning 2
PROGRAM
MHz
MHz
kHz
kHz
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
or turn Multi Jog Knob
to tune in to a lower or higher frequency.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
43
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
To tune in to a preset station, press
remote control to select a channel.
on the
44
RADIO OPERATION
1
Press the Function
button to select the
desired band (FM,
MW,(SW1,2)).
Listening to a Cassette
Selecting the Cassette Playback Mode
Always treat your cassettes with care; refer, if necessary, to the section entitled
“Precautions When Using Audio Cassettes” on page 57.
Your micro component system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically. (TAPE 2 only).
Press REVERSE MODE until the appropriate
symbol is displayed.
•
: One
•
: One
•
1
Switch the system
on by pressing
STANDBY ON.
2
Press TAPE on
the player to
select the Tape
function.
3
Press the PUSH
EJECT ( ) of the
cassette tape to open
the cassette door and
insert a cassette.
• Insert a cassette with the
recording/playback side facing
the cassette holder, and then
push the cassette door shut.
• Side A : Tape (
• Side B : Tape (
•
) button once.
) button
twice.(Tape 2 only)
Press DECK 1/2 button to select the
cassette to be played.
45
5
Press the
,
button if necessary.
• Rewind the cassette
•
/ DOWN
button.
Fast-forward the cassette UP /
button.
6
When you have
finished playback,
press STOP button.
side of the cassette.
The other side of the cassette and then stops.
: Both sides of the cassette indefinitely until you
press stop.
Tape Counter
When playing a cassette in one of the cassette
decks, a counter is displayed to enable you to
take note of the counter value at the start of
each track to start playback at the
beginning of the track to which you wish to
listen.
•
•
TAPE TAPE
4
Press the
button. The cassette
starts playing.
side of the selected cassette and then stops.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
Each cassette deck has a separate counter.
46
Recording a Compact Disc
Coping a Cassette(Dubbing)
can copy a cassette from Tape 1 to Tape 2.
•Normal speed dubbing in selecting Tape function mode.
•You do not need to adjust the volume, as it has no effect on the recording.
•Take care not to insert the tape to be copied in Tape 2, as it will be erased when
you start recording.
You can record a compact disc on a cassette in two different ways:
You
Synchronised recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.
1
Switch the system
on by pressing
STANDBY/ON.
2
Insert a blank
cassette in Tape 2.
3
Insert the tape to
be copied in Tape1.
1
Switch the system
on by pressing
STANDBY/ON.
2
Insert a blank
cassette in Tape 2.
• Press the PUSH/EJECT button (
•
5
Press
STOP button.
4
Press the DVD/CD
(
) button.
• Use the CD selection (
The appropriate indications are
displayed and the cassette in
Tape 1 is copied to the cassette
in Tape 2.
47
,
)
buttons to select the desired song.
5
Press CD SYNCHRO
button.
• Press the OPEN/CLOSE button (
•
6
To stop recording,
press
button.
• When stopped, press the button to
•
start the recording from the first
piece of music.
Press and hold CD/SYNCHRO
button during the playback of CD to
start the recording from the first part
of the music being played.
)
to open the CD door.
Insert a CD and press the
OPEN/CLOSE button ( ) to close
the CD door.
Note
MISCELLANEOUS
4
Press DUBBING
button to copy a
cassette.
)
to open the cassette door, insert a
cassette, and then close the cassette
door.
Insert the cassette with the safety
tabs.
3
Load a compact
disc.
•You can use CD/SYNCHRO button
only in CD Playback Mode.
48
Recording a Radio Program
Direct recording
You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on the recording.
The direct recording mode enables you to start recording with any track on the compact disc.
1
Switch the system
on by pressing
STANDBY/ON.
2
Insert a blank
cassette in Tape 2.
• Press the PUSH/EJECT button (
•
4
Press the DVD/CD
(
) button.
• Use the CD selection (
,
)
buttons to select the desired song.
5
Press
REC/ PAUSE
button.
• Recording will begin.
• To stop recording, press
Load a compact
disc.
• Press the OPEN/CLOSE button (
•
to open the CD door.
Insert a CD and press the
OPEN/CLOSE button ( ) to close
the CD door.
)
1
Switch the system
on by pressing
STANDBY/ON.
4
Select the radio
station that you wish
to record by pressing
/DOWN or UP/
button .
2
Insert a blank
cassette in Tape 2.
3
Select the
TUNER function
by pressing
TUNER/BAND.
5
Press(REC/PAUSE)
button.
6
To stop recording,
press
button.
Note
• The cassette tape you want to record
button.
on must have the safety tabs intact.
• REC is displayed in red and
recording starts.
50
MISCELLANEOUS
49
)
to open the cassette door, insert a
cassette, and then close the cassette
door.
Insert the cassette with the safety
tabs.
3
Timer Function
Canceling the Timer
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options.
After having set the timer, it will start automatically as shown by the TIMER indication on the display.
If you no longer wish to use the timer, you must cancel it.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
1
Switch the system
on by pressing
STANDBY/ON.
2
Press
TIMER/CLOCK
until TIMER is
displayed.
3
Press the ENTER
button.
• ON TIME is displayed (instead
To cancel the timer, press TIMER ON/OFF
once.
•
is no longer displayed.
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
4
Set the timer
switch-on time.
a. Set the hour by pressing
or
button.
b. Press ENTER .
• The minutes flash.
c. Set the minutes by pressing
or
button.
d. Press ENTER.
• OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switchoff time already set; you can now
set the timer switch-off time.
7
6
•
is displayed again.
displayed.
Note
• You can cancel the timer while the power is on or while the player is in standby.
Press ENTER to
confirm the timer.
9
•
• TAPE (cassette) : Insert a cassette
tape.
• TUNER (radio) : a Press ENTER.
•
To resume the timer, press TIMER ON/OFF
again.
• The source to be selected is
a. Set the hour by pressing
or
button.
b. Press ENTER.
• The minutes flash.
c. Set the minutes by pressing
or
button.
d. Press ENTER.
• VOL 10 is displayed, where 10
corresponds to the volume
already set.
8
Press or button
to adjust the volume
level and press
ENTER.
Press
STANDBY/ON to
set the system to
standby mode.
MISCELLANEOUS
Press or button
to select the source to
be played when the
system switches on.
5
Set the timer
switch-off time.
is displayed to the top right of
the time, indicating that the timer
has been set.
The system will switch on and off
automatically at the required
times.
b Select a preset
station by pressing
•
or .
CD (compact disc) : Load a compact
disc.
• If the timer switch on and off times are identical, the word ERROR is displayed.
Note
51
•You can also use Multi Jog or
button to instead
,
button on the remote control in step 4,5,6,7.
52
Sleep Timer Function / Mute Function
P.SOUND/SURROUND/SURROUND XT and
LATIN SOUND Function
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• Each time the button is pressed, the selection changes as follows:
90 MIN ➝ 60 MIN ➝ 45 MIN ➝ 30 MIN ➝ 15 MIN ➝ OFF.
kHz
MHz
P.SOUND/SURROUND/SORROUND
XT Function
Your mini-compact system is equipped with the function
of Power Sound/Power Surround/Power Surround XT.
The function of Power Sound/Power Surround /Power
Surround XT amplifies bass and improves high key or bass
twice as much for you to appreciate powerful real sound.
Press theSURROUND XT button on
the front panel.
Result: Press SURROUND XT button on the front
panel,“P,SOUND,P,SURROUND,P,SURROUNDXT,
OFF” is displayed.
To cancel this function, pressSURROUND XT button again .
Selecting LATIN SOUND
Your mini-compact system is equipped with a
preset equalizer that allows you to choose the
most appropriate balance between treble and bass
frequencies, according to the type of music you are
listening to.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
Turn LATIN SOUND on the front panel or
Press LATIN SOUND on the remote control
until the required option is selected.
Select...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
Balance suitable for hall
Balance suitable for live
Balance suitable for cinema
PASS
POP
ROCK
CLASSIC
SALSA
SAMBA
LAMBADA
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
MISCELLANEOUS
To obtain a...
• ‘MUTE ’ appears in the display.
• To turn off mute, press the button again.
kHz
MHz
53
54
Connecting Headphones/Microphone(option)
DEMO Function / DIMMER Function
You can connect a set of headphones to your micro component system so that you
can listen to music or radio programmers without disturbing other people in the room.
The earphones must have a 3.5ø jack or an appropriate adapter.
DEMO Function
DIMMER Function
You can view the various functions available on
your system.
You can adjust the brightness of the display on the main
unit so it won't interfere with your movie viewing.
Press DEMO/DIMMER button.
Press DEMO/DIMMER button.
Connect the headphones to the PHONES jack on the front panel.
• The loudspeakers are no longer used to output the sound.
Note
• The various functions available are listed in turn on the
•
display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the
appropriate sections.
55
follows: DIMMER ON(Dim) ➞ DIMMER OFF(Bright).
• Prolonged use of headphones at a high volume may damage your hearing.
Plug the microphone with a 6.3ø MIC jack into microphone terminal.
MISCELLANEOUS
To cancel this function, press
DEMO/DIMMER again.
• Each time the button is press, the brightness changes as
• Connect the Microphone.
• Turn the MIC LEVEL knob to adjust the MIC volume.
• Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
• During using the microphone ,you can press the REC/PAUSE button to record your favorite.
56
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Symptom
Disc tray does not open.
Playback does not start.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
The remote control does
not work.
• Is the remote control being operated within its operation range of
angle and distance?
• Are the batteries exhausted?
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
• Was the DVD player suddenly moved from a cold place to a warm
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism.
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
MISCELLANEOUS
57
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
Play/Pause button is pressed. • Wipe the disc clean.
• Check that the tape in the cassette is sufficiently taut.
• To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the
temperatures.
• Check the region number of the DVD.
player.
Sound is not produced.
•
• Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Make sure that the rating level is correct.
Precautions When Using Audio Cassettes
cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive
tape.
When you have finished playing a cassette, always put it back in its case.
Check/Remedy
58
Notes on Discs
Symptom
Audio language and
subtitles do not work.
Menu screen does not appear even
when the menu function is selected.
Check/Remedy
• Audio language and subtitles will not work for DVDs not containing
them. And depending on the disc, they may work differently.
Disc Recording Format
CD-R Discs
• Are you using a disc that does not contain menus?
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
The tape does not start
playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
• The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
The password for rating
level has been forgotten.
antenna in an area with good reception.
• Turn off the power and hold the P.Suppound/P.Sound button on
the main unit for longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While the player is in “NO DISC” mode, hold the main unit's TUNING
you may not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• If the name of a file is in Korean, the name will be displayed on the TV screen in Korean and * will be shown in the
display of the main unit.
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the
disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
What is MP3?
MP3 is short for MPEG-1 Audio Layer 3 and MPEG is an acronym for Moving Pictures Experts
Group. MP3 is a file format with compression ratio of 1:12 (128 Kbps*) That is, you can use MP3
format to record about 12 times the usual amount of data on a regular CD.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
59
60
MISCELLANEOUS
MODE/ button for longer than 5 seconds. “INITIAL” appears on the
display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
may not be playable.
Notes on Terminology
Specifications
RADIO
ANGLE
CHAPTER
NUMBER
DVD
PCM
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
SW(option)
Usable sensitivity
40 dB
AM (MW)
Signal/noise ratio
40 dB
Usable sensitivity
60 dB
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
Total harmonic distortion
2%
Signal/noise ratio
55 dB
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
Usable sensitivity
10 dB
Total harmonic distortion
0.6 %
An acronym for Pulse Code Modulation - another name for digital audio.
Capacity
3 discs
Frequency range
20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio
85 dB (at 1 KHz) with filter
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
FM
COMPACT DISC PLAYER
Distortion
0.05 % (at 1 KHz)
Channel separation
75 dB
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
Frequency range
125 Hz ~ 10 KHz
Signal/noise ratio
40 dB
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
Channel separation
30 dB
TITLE NUMBER
Erasing effect
50 dB(without filter)
TRACK NUMBER
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
61
TAPE
AMPLIFIER
Output power
Speaker(6 Ω)
80 Watts/CH RMS,IEC (total harmonic distortion: 10 %)
Channel separation
40 dB
Signal/noise ratio
75 dB
GENERAL
Power consumption
85W
Dimensions
270 (D) x 332 (H) x 426 (W) mm
62
Download PDF