Samsung | SOC-320 | Samsung SOC-320 User Manual

SOC-320(P)
Installing Manual
E
Manuel d’installation
F
Montageanleitung
D
Manuale d’installazione
I
Manual de instalación
Es
Installatiehandleiding
NL
Manual de instalação
PT
Installationsvejledning
DK
Installationsbruksanvisning
S
àÌÒÚÛ͈Ëfl ÔÓ ÛÒÚ‡ÌÓ‚ÍÂ
R
Important Safety Instructions
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
E
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED
SERVICE PERSONNEL.
6.
If this product fails to operate normally, contact the store of purchase or
your nearest service center. Never disassemble or modify this product in any
way. (The manufacturer is not liable for any damage resulting from
unauthorized disassembly or repairs.)
7.
When cleaning, do not spray water directly onto parts of the product. (Doing
so may cause fire or electric shock.) Wipe the surface with a dry cloth.
Never use detergents or chemical cleaners on the product, as this may result
in discoloration of surface or cause damage to the finish.
1.
Do not drop objects on the product or apply strong shock to it. Keep away
from a location subject to excessive vibration or magnetic interference.
2.
Do not install in a location subject to high temperature (over 50°C/122°F),
This symbol alerts you that
important literature concerning
operation and maintenance has
been included with this product.
1.
Make sure that the cable is plugged in securely before using.
(A loose connection may result in fire.)
2.
When installing the camera on a wall or ceiling, mount it safely and
securely. (A falling camera may cause personal injury.)
3.
3.
Do not place conductive objects (e.g., screwdrivers, coins, and
metal things) or containers filled with water on top of the camera.
(Serious injury may result from fire, electric shock, or falling objects.)
Avoid a location which is exposed to direct sunlight, or near heat sources
such as heaters or radiators. (Neglecting to do so may result in a risk of fire).
4.
If you want to relocate the already installed product, be sure to turn off the
power and then move or reinstall it.
Do not install in a sooty, dusty, or humid location.
(Doing so may cause fire or electric shock.)
5.
Install in a well - ventilated location.
6.
Remove the power plug from the outlet when there is a lightning storm.
(Neglecting to do so may cause fire or damage to the product.)
4.
5.
2
This symbol indicates high voltage
is present inside. It is dangerous
to make any kind of contact with
any inside part of this product.
If any unusual smells or smoke come from the unit, stop using the
product. In such case, immediately disconnect the power source and
contact the service center. (Continued use in such a condition may
cause fire or electric shock.)
E
low temperature (below -10°C/14°F), or high humidity. (Doing so may cause
fire or electric shock).
3
Table of Contents
Chapter 1
Chapter 2
Important Safety Instructions
Chapter 3
What is Color Rolling?
Non-periodical changes in color (to red, cyan, and yellow,
etc) due to unstable color temperature. This is caused by
the repeated flickering of mechanical fluorescent lamps
corresponding to the power frequency.
Occurrence of Color Rolling.
Color Rolling can occur in environmens with mechanical
fluorescent lamps, with manual Iris installation, and with
the shutter speed set at ELC (Electronic Level Control).
What is Flicker?
The Human eye can detect flickering when the contrast
repeat frequency is low. This effect is called flicker. Flicker
is serious when the vertical synchronizing frequency differs from the ON/OFF frequency of fluorescent light. This
situation occurs when using an NTSC camera at locations
where the power frequency is 50Hz and/or when using a
PAL camera at locations where the power frequency is
60Hz.
What is FL Mode?
Fixing the shutter speed at 1/100(NTSC) or 1/120(PAL) to
prevent flicker at locations with different power frequencies.
11
SOC-320(P) Product Specification
SOC-320(P) Product SPEC
4
8
Specifications for Outer Connector Pin
Pin arrangement for the SOC-320(P) RJ-45 connector of
Appendix
6
7
E
Installing the SOC-320(P)
Installing the SOC-320(P)
Chapter 5
Introduction of the SOC-320(P) Camera
The SOC-320(P) camera uses the VPP system exclusively manufactured by Samsung
Electronics.
It is not compatible with other products and will not in conjunction with them.
The camera is easy to install, even for general users, has a built-in microphone, and uses a
Varifocal AI (Auto iris) lens to produce the desired picture.
The Auto Iris has been installed to eliminate the Color Rolling effect, and generates clear pictures without flicker at locations with different power frequencies.
5
Before Installing SOC-320(P)
Check the Contents of the Package
Notice for Installation & Operation
Chapter 4
2
A look at the SOC-320(P)
Introduction of the SOC-320(P) Camera
E
A look at the SOC-320(P)
12
5
Before Installing SOC-320(P)
Check the Contents of the Package
Notice for Installation & Operation
Please make sure the following items (camera, accessories, cables, bracket,
and user's guide) are included in your SOC-320(P) package.
E
✔ Confirm before installation that the chosen location can bear more than five
times the camera’s weight (approximately 1 Kg).
E
✔ Take care not to allow the cable to become trapped between parts, and make
sure the cable insulation is undamaged. (May cause malfunctions and/or fire)
✔ Be careful not to drop equipment while doing the installation and keep people
and valuables away from the area underneath.
✔ Install the SOC-320(P) in a cool location away from direct sunlight.
Do not expose the SOC-320(P) to direct sunlight at any time.
Cable
✔ Use the SOC-320(P) in environments with stable temperature and humidity
ranges as suggested below
- Temperature: -10°C ~ +50°C (14°F~122°F)
- Humidity: Below 90%
AC
CE
SS
O
RI
ES
Camera
Bracket
6
Accessories
User Manual
7
Installing the SOC-320(P)
Installing the SOC-320(P)
1. Find a suitable place for installing the camera. (Must be able to bear five times
the weight of the camera [approx. 1Kg])
E
2. Install the Mounting Bracket provided at the
desired location, and assemble the camera onto
the bracket. Then connect the cable to the RJ-45
connector.
5-2. Use the lens Zoom Lever to set the desired zoom
position.
E
5-3. After setting this position, adjust the Focus Lever
to get the picture into focus.
3. Plug the other end of the cable that is connected to the camera into the monitor.
4. Use the Handle on the Mounting Bracket when
adjusting the direction of view.
5-4. When the zoom and focus settings are finished,
rotate the Zoom and Focus Levers to fix the lens
in position.
5. Adjusting Zoom and Focus
5-1. Turn the lens part of the camera in the direction shown in the picture and pull
to separate the lens -hood.
5-5. After the adjustment, put the lens hood onto the
camera body and rotate it in the locking direction
to connect it.
8
9
Specifications for Outer Connector Pin
Installing the SOC-320(P)
Pin arrangement for the SOC-320(P) RJ-45 connector
6. Setting the brightness (Iris setting)
The Iris is adjusted in the factory prior to shipping; however, users may need to adjust the
opening and/or closing of the Iris according to the
position of installation, and ambient light conditions. Use the Level VR located on the back of
the camera to optimize conditions.
E
7. Selecting FL-MODE Switch
This function key is used to switch the anti-flicker
function ON/OFF.
Flicker effect occurrence (due to power frequency differences) may be eliminated by turning this
Key ‘ON’.
8. After the camera lens has been adjusted, use the camera mount bracket to the
direction you want to monitor and then fasten it tight.
10
E
Pin No.
8
...
1
Pin Arrangement
1
DATA+
2
VIDEO_OUT
3
GND
4
DATA-
5
AUDIO_OUT
6
VDD
7
GND_V
8
CH_SEL
★
★
★
Pins indicated with ‘★’ are not used.
11
SOC-320(P) Product Specification
SOC-320(P) Product SPEC
DESCRIPTION
ITEM
E
12
SOC-320N
SOC-320P
Product Type
Varifocal DC Auto Iris Type Normal camera
Varifocal DC Auto Iris Type Normal camera
Power Source Voltage
DC 12 ~ 18V From Monitor
DC 12 ~ 18V From Monitor
Power Consumption
Approx. 2W
Approx. 2W
Broadcast System
NTSC Standard Color Camera
PAL Standard Color Camera
Image Device
1/4 inch IT Super HAD CCD
1/4 inch IT Super HAD CCD
Effective Pixel
510(H) X 492(V)
500(H) X 582(V)
Scanning Method
525 Line, 2:1 Interlace
625 Line, 2:1 Interlace
Line Frequency
Horizontal : 15,734Hz
Horizontal : 15,625Hz
Vertical : 60Hz
Vertical : 50Hz
Synchronization Method
INT
INT
Resolution
330 TV Lines
330 TV Lines
S/N Ratio
Over 48dB
Over 48dB
Minimun Sence Illumination
2 Lux(F2.0 50IRE)
2 Lux(F2.0 50IRE)
Color Temperature
ATW
ATW
Electronic Shutter
ELC
ELC
Signal Output
Composite Video Out : 1.0Vp-p
Composite Video Out : 1.0Vp-p
75 Ohms/RJ45 Jack
75 Ohms/RJ45 Jack
Lens
3.4 ~ 9.0mm F:1.6 Varifocal DC Auto Iris
3.4 ~ 9.0mm F:1.6 Varifocal DC Auto Iris
Operating Temperature
-10°C +50°C
-10°C +50°C
Operating Humidity
~90%
~90%
Physical Size
62.5(W)X51(H)X119.5(L)
62.5(W)X51(H)X119.5(L)
Weight
Approx. 170g
Approx. 170g
ELECTRONICS
Part No. AB68-00435A
Printed in Korea
Download PDF

advertising