Samsung | SOC-220 | Samsung SOC-220 User Manual

SOC-420(P)
SOC-220(P)
Installing Manual
E
Montageanleitung
D
Manuel d’installation
F
Manual de instalación
Manuale d’installazione
Es
I
Important Safety Instructions
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
E
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO
USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED
SERVICE PERSONNEL.
Make sure that the cable is plugged in securely before using.
(A loose connection may result in fire.)
2.
When installing the camera on a wall or ceiling, mount it safely and
securely. (A falling camera may cause personal injury.)
4.
5.
6.
If this product fails to operate normally, contact the store of purchase or
your nearest service center. Never disassemble or modify this product in any
way. (The manufacturer is not liable for any damage resulting from
unauthorized disassembly or repairs.)
7.
When cleaning, do not spray water directly onto parts of the product. (Doing
so may cause fire or electric shock.) Wipe the surface with a dry cloth.
Never use detergents or chemical cleaners on the product, as this may result
in discoloration of surface or cause damage to the finish.
1.
Do not drop objects on the product or apply strong shock to it. Keep away
from a location subject to excessive vibration or magnetic interference.
2.
Do not install in a location subject to high temperature (over 50°C/122°F),
This symbol alerts you that
important literature concerning
operation and maintenance has
been included with this product.
1.
3.
2
This symbol indicates high voltage
is present inside. It is dangerous
to make any kind of contact with
any inside part of this product.
low temperature (below -10°C/14°F), or high humidity. (Doing so may cause
fire or electric shock).
3.
Do not place conductive objects (e.g., screwdrivers, coins, and
metal things) or containers filled with water on top of the camera.
(Serious injury may result from fire, electric shock, or falling objects.)
Avoid a location which is exposed to direct sunlight, or near heat sources
such as heaters or radiators. (Neglecting to do so may result in a risk of fire).
4.
If you want to relocate the already installed product, be sure to turn off the
power and then move or reinstall it.
Do not install in a sooty, dusty, or humid location.
(Doing so may cause fire or electric shock.)
5.
Install in a well - ventilated location.
6.
Remove the power plug from the outlet when there is a lightning storm.
(Neglecting to do so may cause fire or damage to the product.)
If any unusual smells or smoke come from the unit, stop using the
product. In such case, immediately disconnect the power source and
contact the service center. (Continued use in such a condition may
cause fire or electric shock.)
E
3
Table of Contents
SOC-420(P)/SOC-220(P) Introduction
Chapter 1
SOC-420(P)/SOC-220(P) Introduction
5
Chapter 2
Checking the Contents of the Package
Precautions for Installation and Use
6
7
Chapter 3
Installing SOC-420(P)/SOC-220(P)
8
Appendix
SOC-420(P)/SOC-220(P) Pin Configuration
9
SOC-420(P)/SOC-220(P) Product Specifications10
E
The SOC-420(P)/SOC-220(P) is a camera for the VPP (Video Professional
Package) only. The SOC-420(P) has a 12x zoom lens and a built-in microphone and the SOC-220(P) has a built-in microphone. Both cameras can
easily be installed by novices.
E
The SOC-420(P) is an advanced surveillance device that enables a maximum of 120x zoom surveillance with its 12x zoom lens and 10x digital
zoom IC.
The SOC-420(P) is a multifunction surveillance device that is equipped
with all of the key features of the existing surveillance cameras: the LowLight Surveillance function that enables shooting moving objects under
extremely low illumination; the White Balance function that provides accurate color rendition under any light source; the BLC function that enables
effective back light compensation even at locations with bright incident
light; the built-in microphone that allows the user to hear all sounds generated in the monitoring area; and the One Auto Focus function that automatically tracks and focuses on the subject. The built-in microphone that
allows the user to hear all sounds generated in the monitoring area.
Also, the SOC-220(P) features the Auto White Balance function and the
built-in microphone. Unlike the SOC-420(P), it does not have a zoom lens.
4
5
Before Installation
E
Checking the Contents of the Package
Precautions for Installation and Use
Make sure that all items (including the camera, mounting bracket, installing manual
and cable) are included in your SOC-420(P)/SOC-220(P) package.
✔ Please check whether the installation site can sufficiently support the weight of
the SOC-420(P)/SOC-220(P) before installation. (approx. 800g for the SOC420(P) and 500g for the SOC-220(P)).
E
✔ Make sure that the cable is not caught on anything or its insulation sheath is
not removed. (Neglecting to do so may cause fire or damage to the product.)
Ins
tal
ling
Ma
nu
al
✔ Prevent people from approaching the installation area, where objects might fall
during installation. Move valuables to a safe location before installation.
✔ Install in a cool place and away from direct sunlight.
Be sure not expose the SOC-420(P)/SOC-220(P) to direct sunlight even during
use or storage. Use the BLC function when operating the SOC-420(P)/SOC220(P) underneath a spot light or under very bright lights.
✔ The SOC-420(P)/SOC-220(P) must be used in an area where temperature and
humidity are kept within the limits specified below:
- Temperature: -10°C ~ +50°C (14°F~122°F)
- Humidity: Below 90%
6
7
Installing SOC-420(P)/SOC-220(P)
SOC-420(P)/SOC-220(P) - Pin Configuration
1. Choose an installation site that can sufficiently support a minimum of five times
the net weight of the equipment to be installed (approx. 800g for the SOC420(P) and 500g for the SOC-220(P)).
2. Install the provided mounting bracket and then connect
one end of the cable to the rear of the camera. When
doing this, arrange the cable so that it won't get
damaged or caught on anything.
E
3. Connect the other end of the cable to the monitor or other accessory equipment.
8
...
1
1
DATA+
2
VIDEO_OUT
3
GND
4
DATA-
5
AUDIO_OUT
6
VDD
7
GND_V
8
CH_SEL
E
4. Use the handle on the mounting bracket to direct the camera to the area you
want to monitor.
8
9
SOC-420(P)/SOC-220(P) - Product Specifications
DESCRIPTION
ITEM
Product Type
Power Source Voltage
Power Consumption
Broadcast System
Imaging Device
Effective Pixel
Scanning Method
Line Frequency
E
Synchronization Method
Resolution
S/N Ratio
Minimum Scene Illumination
Normal Camera
DC 12~18V From Monitor
Approx. 2W
PAL Standard Color Camera
1/4 inch IT Super HAD CCD
500(H) X 582(V)
625 Line, 2:1 Interlace
Horizontal:15,625 Hz
Vertical: 50 Hz
INT
330 TV Lines
Over 48dB
2 Lux (F2.0 50IRE)
Color Temperature
ATW
Electronic Shutter
ELC
Back Light Compensation
Sense Up
Digital Zoom
Motion Detection
Video Control
Signal Output
Lens
Operating Temperature
Operating Humidity
Physical Size
Weight
10
SOC-220P
Composite Video Out : 1.0 Vp-p
75 ohms/RJ45
Focal length : 2.9 mm
Aperture(F) : F2.0
-10°C ~ +50°C
~90%
51.8mm(W)x50.3mm(H)x96.5mm(L)
Approx. 100g
12x Zoom Lens Camera
DC 12~18V From Monitor
Approx. 6W
PAL Standard Color Camera
1/4 inch IT S-HAD CCD
752(H) X 582(V)
625 Line, 2:1 Interlace
Horizontal:15,625 Hz
Vertical: 50 Hz
INT
480 TV Lines
Over 50dB (AGC Off)
2 Lux (Sense Up Off)
0.02 Lux (Sense Up x128)
ATW/AWC/Manual MODE
(3200°K, 5600°K, R/B Gain Control)
Off, 1/120, 1/250, 1/500, 1/1K,
1/2K, 1/4K, 1/10K sec
Off/On (Area Setting)
Off/Auto x2~x128/Fix x2~x128
Off, x2, x4, x6, x8, x10
Off/On (Area/Sensitivity Setting)
POSI/NEGA, MIRROR, Detail Setting
Composite Video Out : 1.0 Vp-p
75 ohms/RJ45
Focal length : 3.6 ~ 43.2 mm
Aperture : F1.8(Wide), F2.6(Tele)
-10°C ~ +50°C
~90%
51.8mm(W)x50.3mm(H)x96.5mm(L)
Approx. 160g
DESCRIPTION
ITEM
SOC-420P
Product Type
Power Source Voltage
Power Consumption
Broadcast System
Imaging Device
Effective Pixel
Scanning Method
Line Frequency
SOC-220
Synchronization Method
Resolution
S/N Ratio
Minimum Scene Illumination
Normal Camera
DC12~18V From Monitor
Approx. 2W
NTSC Standard Color Camera
1/4 inch IT Super HAD CCD
510(H) X 492(H)
525 Line, 2:1 Interlace
Horizontal:15,743 Hz
Vertical: 60 Hz
INT
330 TV Lines
Over 48dB
2 Lux (F2.0 50IRE)
Color Temperature
ATW
Electronic Shutter
ELC
Back Light Compensation
Sense Up
Digital Zoom
Motion Detection
Video Control
Signal Output
Lens
Operating Temperature
Operating Humidity
Physical Size
Weight
Composite Video Out : 1.0 Vp-p
75 ohms/RJ45
Focal length : 3.8 mm
Aperture(F) : F2.0
-10°C ~ +50°C
~90%
51.8mm(W)x50.3mm(H)x96.5mm(L)
Approx. 100g
SOC-420
12x Zoom Lens Camera
DC12~18V From Monitor
Approx. 6W
NTSC Standard Color Camera
1/4 inch IT S-HAD CCD
768(H) X 494(V)
525 Line, 2:1 Interlace
Horizontal:15,734 Hz
Vertical: 60 Hz
INT
480 TV Lines
Over 48dB (AGC Off)
2 Lux (Sense Up Off)
0.02 Lux (Sense Up x128)
ATW/AWC/Manual MODE
(3200°K, 5600°K, R/B Gain Control)
Off, 1/100, 1/250, 1/500, 1/1K,
1/2K, 1/4K, 1/10K sec
Off/On (Area Setting)
Off/Auto x2~x128/Fix x2~x128
Off, x2, x4, x6, x8, x10
Off/On (Area/Sensitivity Setting)
POSI/NEGA, MIRROR, Detail Setting
Composite Video Out : 1.0 Vp-p
75 ohms/RJ45
Focal length : 3.6 ~ 43.2 mm
Aperture : F1.8(Wide), F2.6(Tele)
-10°C ~ +50°C
~90%
51.8mm(W)x50.3mm(H)x96.5mm(L)
Approx. 160g
E
11
Download PDF

advertising