Samsung | HT-E453K | Samsung HT-E453K User Manual

HT-E450K
HT-E453K
HT-E453HK
HT-E445K
HT-E455K
Digital Home
Entertainment System
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION : TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
This symbol indicates important
instructions accompanying the
product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CAUTION
• Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
• The Mains plug is used as a disconnect device and shall
stay readily operable at any time.
• This apparatus shall always be connected to a AC outlet
with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug
must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
2
English
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Precautions
• Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product.
• Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm).
• Do not place the product on amplifiers or other equipment which may become hot.
Make sure the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert Hole is empty.
• In order to disconnect the product completely from the power supply, remove the AC plug from the wall outlet, especially when left
unused for a long period of time.
• During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the
product.
• Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and malfunction of the
product.
• Protect the product from moisture, and excess heat or equipment creating strong magnetic or electric fields (i.e.
speakers.).
• Disconnect the power cable from the AC supply if the product malfunctions.
• Your product is not intended for industrial use. Use of this product is for personal use only.
• Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the product during
the winter, wait approximately 2 hours until the product has reached room temperature before using.
• The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash.
Accessories
Check for the supplied accessories below.
ECHO
MIC VOL +
MIC VOL
b
#
MY KARAOKE
KEYCON
HDMI Cable(option)
Video Cable
FM Antenna
User manual
Remote Control/Batteries
(AAA size)
English
3
Safety Information
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and
picture quality or cause skipping.
Be especially careful not to scratch discs when
handling them.
Holding discs
• Do not touch the playback side of the disc.
• Hold the disc by the edges so that
fingerprints will not get on the surface.
• Do not stick paper or tape on the disc.
Disc Storage
• Do not keep in direct sunlight
• Keep in a cool ventilated area
• Keep in a clean Protection jacket.
Store vertically.
✎ NOTE


Do not allow the discs to become contaminated with dirt.
Do not load cracked or scratched discs.
Handling and Storing Discs
If you get fingerprints or dirt on the disc, clean it with a
mild detergent diluted in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the
outside of the disc
✎ NOTE

Condensation may form if warm air comes into contact
with cold parts inside the product. When condensation
forms inside the product, it may not operate correctly. If
this occurs, remove the disc and let the product stand
for 1 or 2 hours with the power on.
Licence
• Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,487,535 & other U.S. and worldwide patents issued
& pending. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks & DTS Digital Surround and the DTS logos
are trademarks of DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
• ABOUT DIVX VIDEO: DivX® is a digital video format created
by DivX,LLC,a subsidiary of Rovi Corporation. This is an
official DivX Certified® device that plays DivX video. Visit
divx.com for more information and software tools to convert
your files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to
complete your registration.
• DivX Certified® to play DivX® video, including premium
content.
• DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and are
used under license.
• Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
• This item incorporates copy protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
• This product uses some software programs which are distributed
under the Independent JPEG Group.
• This product uses some software programs which are distributed
under the OpenSSL Project.
Copyright
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
Copy Protection
• Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
4
English
• Many DVD discs are encoded with copy protection.
Because of this, you should only connect your product
directly to your TV, not to a VCR. Connecting to a VCR
results in a distorted picture from copy-protected DVD
discs.
Contents
SAFETY INFORMATION
2
GETTING STARTED
7
CONNECTIONS
15
23
Safety Warnings
Precautions
Accessories
Cautions on Handling and Storing Discs
Licence
Copyright
Copy Protection
7
7
11
11
12
13
Icons that will be used in manual
Disc Types and Characteristics
Description
Front Panel
Rear Panel
Remote control
15
19
20
21
21
Connecting the Speakers
Connecting the Video Out to your TV
Connecting Microphone
Connecting the FM Antenna
Connecting Audio from External Components
23
23
24
24
24
24
24
24
25
25
26
26
27
27
27
27
27
27
27
27
28
28
28
28
28
28
Before Starting (Initial Settings)
Setting the Setup menu
Display
TV Aspect
BD Wise
Resolution
HDMI Format
Video Out Signal(option)
Audio
Speaker Settings
DRC (Dynamic Range Compression)
AUDIO SYNC
Speaker Selection
User EQ
Karaoke Scoring
Audio Return Ch.
System
Initial Settings
DivX(R) Registration
DivX(R) Deactivation
Language
Security
Parental Rating
Change Password
Support
Product Information
ENGLISH
SETUP
2
3
3
4
4
4
4
English
5
Contents
BASIC FUNCTIONS
29
ADVANCED FUNCTIONS
29
29
30
30
34
36
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
JPEG File Playback
Using the Playback Function
Sound Mode
Listening to Radio
37
37
USB Function
USB Recording
38
39
40
43
Troubleshooting
Language code list
Specifications
OpenSSL License
37
OTHER INFORMATION
38
•
6
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
English
Make sure to check the following terms before
reading the user manual.
Icon
d
B
A
G
D
!
✎
Term
Definition
DVD
This involves a function
available with DVD-Video or
DVD±R/±RW discs that
have been recorded and
finalised in Video Mode.
CD
This involves a function
available with a data CD
(CD DA, CD-R/-RW).
MP3
This involves a function
available with CD-R/-RW
discs.
JPEG
DivX
CAUTION
This involves a function
available with CD-R/-RW
discs.
This involves a function
available with MPEG4 discs.
(DVD±R/±RW, CD-R/-RW)
This involves a case where a
function does not operate or
settings may be cancelled.
NOTE
This involves tips or instructions
on the page that help each
function operate.
Shortcut
Key
This function provides direct and
easy access pressing the button
on the remote control.
Disc Types and Characteristics
Region Code
The product and the discs are coded by region. These
regional codes must match in order for the disc to play. If the
codes do not match, the disc will not play.
Disc Type
DVD-VIDEO
Region
Code
Area
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
English
7
Getting Started
Icons that will be used in manual
01
Getting Started
Getting Started
Disc types that can be played
Disc Types &
Mark (Logo)
Recorded
Signals
Disc
Size
12 cm
AUDIO
+
DVD-VIDEO
Max. Playing Time
Approx. 240 min.
(single-sided)
Approx. 480 min.
(double-sided)
Approx. 80 min.
(single-sided)
VIDEO
8 cm
Approx. 160 min.
(double-sided)
12 cm
74 min.
8 cm
20 min.
12 cm
-
8 cm
-
AUDIO
AUDIO-CD
AUDIO
DivX
+
VIDEO
Do not use the following type of discs!
• LD, CD-G, CD-I, CD-ROM, DVD-ROM and
DVD-RAM discs cannot be played on this product.
If such discs are played, a <WRONG DISC
FORMAT> message appears on the TV screen.
• DVD discs purchased abroad may not play on this
product.
If such discs are played, a <Wrong Region. Please
check Disc.> message appears on the TV screen.
Disc Types And Disc Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on
the disc recording device (CD-Recorder or PC) and the
condition of the disc.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minutes as
they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully
played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
8
English
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (. / = +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions
can be played.
• Only a consecutively written multisession disc can
be played. If there is a blank segment in the
Multisession disc, the disc can be played only up
to the blank segment.
• If the disc is not closed, it will take longer to begin
playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR)
format, i.e. files encoded in both low bit rate and
high bit rate (e.g., 32Kbps ~ 320Kbps), the
sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
• JPEG file names should be 8 characters or less in
length and contain no blank spaces or special
characters (. / = +).
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
• A maximum of 999 images can be stored on a folder.
• When playing a Kodak/Fuji Picture CD, only the JPEG
files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may
take longer to start playing or may not play at all.
01
• Software updates for incompatible formats are not
supported.
(Example : QPEL, GMC, resolutions higher than
800 x 600 pixels, etc.)
• If a DVD-R/-RW disc has not been recorded
properly in DVD Video format, it will not be
playable.
higher than 48khz or 320kbps, you may experience
shaking on the screen during playback.
• Sections with a high frame rate might not be played
while playing a DivX file.
• Since this product only provides encoding formats
authorized by DivX Networks, Inc., a DivX file
created by the user might not play.
DivX (Digital internet video express)
DivX® is a video file format developed by DivX, Inc and is
based on MPEG4 compression technology to provide
audio and video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio
encoding, enabling to watch a movie at near
DVD-quality video and audio.
Supported Formats (DivX)
This product only supports the following media formats.
If both video and audio formats are not supported, the
user may experience problems such as broken images
or no sound.
Supported Video Formats
Format
AVI
WMV
Supported Versions
DivX3.11~DivX6.8
V1/V2/V3/V7
Supported Audio Formats
Format
Bit Rate
Sampling
Frequency
MP3
80~320kbps
WMA
56~128kbps
AC3
128~384kbps
44.1/48khz
DTS
1.5Mbps
44.1khz
44.1khz
• DivX files, including audio and video files, created in
the DTS format can only support up to 6Mbps.
• Aspect Ratio : This product supports up to 720x576
pixels. TV screen resolutions higher than 800 will not
be supported.
• When you play a disc whose sampling frequency is
English
9
Getting Started
DVD±R/±RW, CD-R/RW Discs
Getting Started
Notes on USB connection
Supported devices: USB storage media, MP3
player, digital camera
1) If a folder or file name is longer than 10
characters, it may not properly display or
operate.
2) A subtitle file bigger than 300KB may not be
properly displayed.
3) A certain USB/digital camera device, USB card
reader is not supported.
4) FAT16 and FAT32 file systems are supported.
5) Photo (JPEG), music (MP3, WMA) and video file
should have their names in Korean or English.
Otherwise, the file may not played.
6) Connect directly to the product's USB port.
Connecting through another cable may raise
problems with USB compatibility.
7) Inserting more than one memory device to a
multi-card reader may not operate properly.
8) PTP protocol for digital camera is not supported.
9) Do not disconnect USB device during a
"Reading" process.
10) Bigger the image resolution, the longer the delay
to displaying.
11) DRM applied MP3/WMA or video files
downloaded from a commercial site are not
played back.
12) External HDD device is not supported.
13) The maximum current applied to an external
USB device via the USB port is 500mA (based
on DC 5V).
10
English
14) Supported file formats
Format
Still
Picture
File name
JPG
MP3
WMA
WMV
DivX
File
extension
JPG
.JPEG
.MP3
.WMA
.WMV
.AVI
Bit rate
–
80~320
kbps
56~128
kbps
4Mbps
4Mbps
Version
–
–
V8
V1,V2,
V3,V7
DivX3.11~
DivX6.8
Pixel
640x480
–
–
720x576
Sampling
Frequency
–
44.1kHz
44.1kHz
44.1KHz~ 48KHz
Music
Movie
01
Getting Started
Description
Front Panel
2
1
4 5 6
3
MIC 1
AUX IN 1
7
8
5V 500mA
MIC 2
12
11
10
9
1
DISC TRAY
Insert disc here.
2
AUX IN 1 CONNECTOR
Connect external components such as an MP3 player.
3
DISPLAY
Displays the playing status, time, etc.
4
OPEN/CLOSE BUTTON (
5
FUNCTION BUTTON (
6
STOP BUTTON (
7
VOLUME CONTROL BUTTON (
8
POWER BUTTON (
9
REMOTE CONTROL SENSOR
10
)
Opens and closes the disc tray.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞AUX 2 ➞ USB ➞ FM
)
Stops disc playback.
)
,
Volume adjustment.
Turns the product on and off.
)
PLAY / PAUSE BUTTON (
)
Detects signals from the remote control.
)
Plays a disc or pauses playback.
11
USB PORT
Connect here and play files from external USB storage devices such as
MP3 players, USB flash memory, etc.
The USB memory that requires high power (more than 500mA at 5V)
may not be supported. (except iPod/iPhone which is compatible with
1A at 5V).
12
MIC JACKS
Connects to the microphone.
English
11
Getting Started
Rear Panel
1
2
3
4 5 6 7
SPEAKERS OUT
AUX IN 2
8
VIDEO
OUT
FM ANT
FA NET
HDMI OUT
(Only For Service)
OPTICAL
SURROUND
SUBWOOFER
SURROUND
DIGITAL
AUDIO IN
1
FA NET (Only for Service)
Used for the service repair.
2
COOLING FAN
The fan always revolves when the power is on. Ensure a minimum of 10cm of clear
space on all sides of the fan when installing the product.
3
SPEAKERS OUTPUT CONNECTORS
Connect the front, center,surround speakers and subwoofer.
4
AUX IN 2 JACKS
Connect to the 2CH Analog output of an external device (such as a VCR).
5
VIDEO OUT JACK
Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
6
EXTERNAL DIGITAL OPTICAL IN JACK
(DIGITAL AUDIO IN)
Use this to connect external equipment capable of digital output.
7
FM ANTENNA JACK
Connect the FM antenna.
8
HDMI OUT JACK
Using an HDMI cable, connect this HDMI output jack to the HDMI input jack
on your TV for the best quality picture.
12
English
01
Getting Started
Remote control
Tour of the Remote Control
FUNCTION
TV
SOURCE
Turn the product on and off.
If you want to change to TV mode,
press the TV button.
If you want to change to Home
Theater, press the DVD button.
Press numeric buttons to operate options.
RECEIVER
SLEEP
DVD
TV
ECHO
1
2
3
4
5
6
7
8
9
DSP/EQ
0
Select the desired Dolby Pro Logic II audio
mode.
Select the desired DSP/EQ audio
mode.
Press to search backwards or
forwards.
Press to skip backwards or forwards.
Press to stop/play a disc.
Press to pause a disc.
MUTE
Cut off the sound temporarily.
MIC VOL +
Adjust the volume.
REPEAT
VOL
TUNING
/ CH
MIC VOL
Brings up the product's setup menu.
DISC MENU
HOME
TITLE MENU
Press to check the disc menu.
Used to change the audio/subtitle
language, angle etc.
TOOLS
INFO
b
Return to the previous menu.
Allow access to common functions
of the DVD Home Theater such as
navigating the Photo List.
Adjust the brightness of Display.
Used to turn on/off GIGA Sound function.
Used to adjust the level of the
subwoofer.
Press to preset FM stations.
or
Press KEYCON button to Select the
Key Control bar.
This is mode selection button.
or
Press to select TV's video mode.
Set a Sleep time to shut off the product.
or
Adjust the echo level of the
microphone.
To open and close the disc tray.
#
EXIT
RETURN
A
B
DIMMER
GIGA
S/W LEVEL
TUNER
MEMORY
KEYCON
C
D
S.VOL
AUDIO
UPSCALE
P.BASS
MY KARAOKE USB REC
Search for active FM stations and
change channels.
or
Adjust the microphone's volume.
Allows you to repeat a title,
chapter, track or disc.
Use this to enter the Title menu.
Display current disc(file) status.
Select on-screen menu items and
change menu value.
or
Press the Key Control(# ,b) to
decrease or increase the key value.
Press this to exit the menu.
Select the desired P.BASS or MP3
Enhancement setting.
Regulate and stabilize the volume level
against a drastic volume change.
Used to start USB recording.
Select MONO or STEREO for radio
broadcasting.
or
Voice remover.
English
13
Getting Started
Installing batteries in the Remote
Control
* Battery size: AAA
TV Brand Code List
Brand
Admiral
(M.Wards)
A Mark
Anam
AOC
Bell & Howell
(M.Wards)




Place batteries in the remote control so they match
the polarity : (+) to (+) and (–) to (–).
Always replace both batteries at the same time.
Do not expose the batteries to heat or flame.
The remote control can be used up to approximately
23 feet (7 meters) in a straight line.
Setting the Remote Control
You can control certain functions of your TV with this
remote control.
When operating a TV with the remote control
1. Press the TV button to set the remote control to
TV mode.
2. Press the POWER button to turn on the TV.
3. While holding down the POWER button, enter
the code corresponding to your brand of TV.
• If there is more than one code listed for your
TV in the table, enter one at a time to
determine which code works.
• Example : For a Samsung TV
While holding down the POWER button, use the
number buttons to enter 00, 15, 16, 17 and 40.
4. If the TV turns off, the setting is complete.
• You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
✎ NOTE


The remote control may not work or some operations
may not be possible with some brands of TVs.
The remote control will work on a Samsung TV by
default.
14
English
Brand
56, 57, 58
MTC
Code
18
01, 15
01, 02, 03, 04, 05, 06,
07, 08, 09, 10, 11,
12, 13, 14
01, 18, 40, 48
NEC
18, 19, 20, 40, 59, 60
Nikei
03
Onking
03
57, 58, 81
Onwa
59, 60
Panasonic
Penney
03
Candle
18
Cetronic
03
Philco
Citizen
03, 18, 25
Philips
Cinema
97
Pioneer
06, 07, 08, 09, 54, 66,
67, 73, 74
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48,
54, 62, 72
63, 66, 80, 91
Classic
03
Portland
15, 18, 59
Concerto
18
Proton
40
Contec
46
Quasar
06, 66, 67
Coronado
15
03, 05, 61, 82, 83, 84
Radio Shack
RCA/
17, 48, 56, 60, 61, 75
Craig
Croslex
62
Proscan
Realistic
Crown
03
Sampo
Curtis Mates
59, 61, 63
Samsung
CXC
Sanyo
Scott
03, 40, 60, 61
Daytron
03
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
40
40
00, 15, 16, 17, 40, 43, 46,
47, 48, 49,
19, 61, 65
Sears
15, 18, 19
Dynasty
03
15, 57, 64
Emerson
03, 15, 40, 46, 59, 61,
64, 82, 83, 84, 85
Fisher
19, 65
Sharp
Signature
2000
(M.Wards)
Sony
50, 51, 52, 53, 55
Funai
03
Soundesign
03, 40
Futuretech
General
Electric (GE)
03
06, 40, 56, 59, 66,
67, 68
Spectricon
01
SSS
18
Brocsonic
✎ NOTE
Code
Daewoo
Hall Mark
40
Sylvania
Hitachi
15, 18, 50, 59, 69
Symphonic
18, 59, 67, 76, 77, 78,
92, 93, 94
03, 19
57, 58
18, 40, 48, 54, 59,
60, 62
61, 95, 96
Inkel
45
Tatung
06
JC Penny
56, 59, 67, 86
Techwood
18
JVC
70
Teknika
03, 15, 18, 25
KTV
59, 61, 87, 88
TMK
18, 40
KEC
03, 15, 40
Toshiba
19, 57, 63, 71
KMC
15
01, 15, 16, 17, 37, 38,
39, 40, 41, 42, 43, 44
Vidtech
18
Videch
59, 60, 69
18
Wards
15, 17, 18, 40, 48,
54, 60, 64
Yamaha
18
York
40
LG (Goldstar)
Luxman
Marantz
19, 54, 56, 59, 60, 62,
63, 65, 71
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
40, 54
Yupiteru
03
Matsui
54
Zenith
58, 79
LXI (Sears)
Magnavox
MGA
Mitsubishi/
MGA
18, 40
Zonda
01
18, 40, 59, 60, 75
Dongyang
03, 54
02
Connections
Connections
This section involves various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
SW
Place it on a stand or cabinet shelf, or under the
TV stand.
Selecting the Listening Position
The listening position should be located about 2.5
to 3 times the distance of the TV's screen size
away from the TV.
Example : For 32" TV's 2~2.4m
For 55" TV's 3.5~4m
Front Speakers ei
Center Speaker
f
hj
Surround Speakers
Place these speakers in front of your listening position, facing inwards (about 45°)
toward you. Place the speakers so that their tweeters will be at the same height
as your ear. Align the front face of the front speakers with the front face of the
center speaker or place them slightly in front of the center speakers.
It is best to install it at the same height as the front speakers. You can also install it
directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Place them about 60 to
90cm above your ear, facing slightly downward.
the front and center speakers, the surround speakers are used to
* Unlike
handle mainly sound effects and sound will not come from them all the time.
Subwoofer
!




g
The position of the subwoofer is not so critical. Place it anywhere you like.
CAUTION
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien
substances into the duct (hole) of the subwoofer.
Do not hang the subwoofer on the wall through the duct (hole).
✎ NOTE

If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field
generated by the speaker. If this occurs, place the speaker away from your TV set.
English
15
Connections
Speaker Components
HT-E450K
(L)
(R)
(L)
FRONT
(R)
CENTER
SURROUND
Speaker Components
SUBWOOFER
Assembled Speakers
HT-E453K
HT-E453K
(L) (R)
(L)
(R)
CENTER SPEAKER
FRONT
STAND
SURROUND
SCREW (5×15): 8EA STAND BASE
CENTER
SUBWOOFER

SPEAKER
CABLE
FRONT
SPEAKER
HT-E453HK
(L)
SURROUND
SPEAKER
SUBWOOFER
HT-E453HK
(R)
STAND BASE

FRONT
(L) (R)
(L)
STAND NUT
STAND DRIVER
FRONT
SPEAKER
(R)
SURROUND
SUBWOOFER
CENTER
SURROUND
SPEAKER
SPEAKER CABLE
✎ NOTE
 Refer to page 17 to install the Speakers on the Tallboy Stand.
16
SUBWOOFER
English
CENTER SPEAKER
02
HT-E445K
HT-E445K
Connections
(L) (R)
SPEAKER CABLE
SCREW (5×15): 16EA
FRONT

STAND
CENTER SPEAKER
(L) (R)
CENTER
SURROUND
STAND BASE
HT-E455K
HT-E455K
(L) (R)
SPEAKER CABLE
SCREW (5×15): 16EA
FRONT
SUBWOOFER
SURROUND
SPEAKER
FRONT
SPEAKER
SUBWOOFER
CENTER SPEAKER
STAND
(L) (R)
CENTER

FRONT/SURROUND SPEAKER
SURROUND
STAND BASE
SUBWOOFER
SUBWOOFER
Installing the Speakers on the Tallboy Stand
* HT-E453K only - Front Speakers
* HT-E445K/E455K only - Front/Surround Speakers
1. Turn the Stand Base upside-down and connect it to the Stand.
2. Insert three screws (5*15, For connecting Stand & Stand Base)
clockwise into the three holes marked using a screwdriver as shown in
the illustration.
!
CAUTION : When you use a torque screwdriver, be careful not to
put excessive force. Otherwise, it runs idle or can be damaged.
(torque screwdriver- below 15 kg.f.cm)
1
Stand Base
2
Stand
3
4
Speaker
Stand
3. Straighten a supplied speaker wire and put in the hole on the center of
Stand Base.
4. Connect the upper Speaker to the assembled Stand.
5
6
5. Insert another large screw (5*15, For connecting Speaker & Stand)
clockwise into the hole on the rear of the speaker using a
screwdriver.
6. This is the appearance after the speaker is installed. Follow this
steps to install other speaker.
English
17
Connections
Installing the Speakers on the Half Tallboy Stand
* HT-E453HK only - Front Speakers
1
2
1. Stretch out the speaker cables as shown and arrange it through the
hole of the stand base .
2. When done, use the stand driver to tighten the stand nut as shown.
3. This is the appearance after the speaker is installed. Follow these
steps to install another speaker.
3
4
5
6
4. If you want to adjust the height of the speaker, loosen two screws
on the rear of the speaker.
5. Pull up the speaker in the arrow direction. Fit the speaker in a height
adjusting hole of your choice.
!
CAUTION : Be careful as an excessive force may result in a physical
damage.
6. Insert two screws clockwise into the hole on the rear of the speaker
using a screwdriver as shown and tighten back 2 screws.
7. This is after the height of the speaker is adjusted.
You can repeat these steps above at any time if you want to
readjust the height.
7
Connecting The Speakers
1. Press down the terminal tab on the back of the speaker. (HT-E453K/
E453HK/E445K/E455K Only)
2. Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab. (HT-E453K/E453HK/E445K/E455K
Only)
Black
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
In case of HT-E450K
Center Speaker
Front Speaker (R)
Front Speaker (L)
SPEAKERS OUT
AUX IN 2
VIDEO
OUT
FM ANT
FA NET
HDMI OUT
(Only For Service)
OPTICAL
SURROUND
SUBWOOFER
SURROUND
DIGITAL
AUDIO IN
Surround Speaker (R)
Surround Speaker (L)
Subwoofer
* Refer to page 16¬17 for the speakers of HT-E453K/E453HK/E445K/E455K.
18
English
Red
02
Connecting the Video Out to your TV
Connections
Choose one of the two methods for connecting to a TV.
METHOD2 (supplied)
KERS OUT
AUX IN 2
VIDEO
OUT
FM ANT
HDMI OUT
OPTICAL
WOOFER
SURROUND
DIGITAL
AUDIO IN
METHOD1
METHOD 1 : HDMI
Connect an HDMI cable (option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on
your TV.
METHOD 2 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
✎ NOTE



Resolutions available for the HDMI output are 576p/480p, 720p,1080i/1080p. See page 24 for the resolution
setting.
This product operates in Interlace scan mode 576i/480i for composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI or Composite) on your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
! CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
If your TV is samsung TV and it supports CEC function.The product's video output will automatically change to HDMI
mode when connecting an HDMI cable while power is on.
• HDMI (High Definition Multimedia Interface)
• HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
• HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
English
19
Connections
HDMI FUNCTION
HDMI Auto Detection Function
• What is the HDCP?
• HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is
only available with SAMSUNG TV's that support Anynet+.
1. Connect the product to a Samsung TV with an HDMI cable. (See page 19)
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
✎ NOTE



The Anynet+ function supports some buttons of the remote control.

Please check the
This function is not available if an HDMI cable does not support CEC.
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
logo (If your TV has an
logo, then it supports Anynet+ function.)
Connecting Microphone
You can enjoy the feeling of a karaoke bar in the comfort of your home.
Watch the video and sing along the lyrics displayed on the TV screen against the accompaniment.
Connect the microphone to the MIC jack on the front of the product.You can connect up to two microphones.
Press the MIC VOL button to adjust the volume of the microphone.
Press the ECHO button to adjust the echo level of the microphone.
MIC 1
MIC 2
During the playback, press the KEYCON button,then press the (#/b) button.
1.
2.
3.
4.
Each time the (#) button is pressed, the key is increased,
and each time the (b) button is pressed, the key is decreased.
5. Press the MY KARAOKE button to suppress the Vocal.Each time the button is
pressed, the selection is changed as follows: Maximum Reduction ➞ Minimum
reduction ➞ Original vocals.
NOTE
 If you hear strange noises (squealing or howling) while using the Karaoke feature,
move the microphone away from the speakers. Turning down the
microphone's volume or the speaker volume is also effective.
✎





The microphone does not operate in the AUX and TUNER mode.
When Speaker Selection is set to TV Speaker, The Microphone is not
available.
After setting my karaoke or the keycon,PLII/S.VOL/P.BASS/DSP(EQ)/GIGA
does not work.
MY KARAOKE function doesn't work in D.IN/DIVX state,KEYCON function
doesn't work in D.IN/DIVX/USB/MP3/WMA state
After the stop operation,the setting of my karaoke and keycon will disappear.
20
English
b
#
TUNER
MEMORY MY KARAOKE
KEYCON
MO/ST
02
Connecting the FM Antenna
Connections
FM Antenna (supplied)
SPEAKERS OUT
AUX IN 2
VIDEO
OUT
FM ANT
HDMI OUT
OPTICAL
SURROUND
SUBWOOFER
DIGITAL
AUDIO IN
SURROUND
1. Connect the FM antenna supplied to the FM Antenna jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a
wall or other rigid surface.
✎ NOTE

This product does not receive AM broadcasts.
Connecting Audio from External Components
Audio Out
AUX IN 1
5V 500mA
AUX IN 1
Audio Cable
(not supplied)
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player.
1. Connect AUX IN 1 (Audio) on the front of the product to the Audio Out of the external component/ MP3
player.
2. Press the FUNCTION button to select AUX1 input.
• The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ FM
English
21
Connections
Connecting Audio from External Components
SPEAKERS OUT
White
VIDEO
OUT
AUX IN 2
FM ANT
FA NET
HDMI OUT
(Only For Service)
OPTICAL
SURROUND
SUBWOOFER
Red
DIGITAL
AUDIO IN
SURROUND
Audio Cable (not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
VCR
Optical Cable
(not supplied)
Set-Top Box
AUX 2
OPTICAL
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN 2 (Audio) on the back of the product to the Audio Out of the external Analog
component.
• Be sure to match the colors of the connecting jacks.
2. Press the FUNCTION button to select AUX 2 input.
• The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ FM
✎ NOTE

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the
external digital component.
2. Press the FUNCTION button to select D.IN.
• The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ FM
22
English
03
Setup
1. Press the POWER button when it is plugged in
TV for the first time.
Initial Settings screen will be displayed.
Initial settings > On-Screen Language
Select a language for the on-screen displays
Setup
Before Starting (Initial Settings)
Setting the Setup menu
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
manual may differ, depending on the firmware version.
1
English
한국어
Nederlands
Français
Deutsch
b
Italiano
>Move
" Select
2. Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
3. Press the ▲▼ buttons to select desired TV Aspect,
then press the ENTER button.
 If the HDMI cable is connected to the product, TV
aspect does not appear.
✎ NOTE





If you have not selected a preferred language in the
initial settings, you will see a language selection window
next time you turn on the product.
Your language selection will apply to all menus:
On-Screen Menu, Disc Menu, Audio, Subtitle.
If you want to move to the previous screen, press the
A(PREVIOUS) or RETURN button.
Once you select a menu language, you can change it by
pressing the STOP () button on the remote control or
the main set for more than 5 seconds in no disc state.
When the Initial Settings screen does not appear, refer
to the Initial Settings. (see page 27)
3
#
4
2
1
HOME BUTTON : Display the home menu.
2
RETURN BUTTON : Return to the previous
setup menu.
3
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
4
EXIT BUTTON : Exit the setup menu.
Settings
Function
DVD/CD
1. Press the POWER button.
2. Press the ◄► buttons to select Settings, then
press the ENTER button.
3. Press the ▲▼ buttons to select the desired
menu, then press the ENTER button.
4. Press the ▲▼ buttons to select the desired
sub-menu, then press the ENTER button.
5. Press the ▲▼ buttons to select the desired
item, then press the ENTER button.
6. Press the EXIT button to exit the setup menu.
English
23
Setup
Display
You can configure various display options such as
the TV Aspect, Resolution, etc.
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting.
• On : The original resolution of the DVD disc will
be output to the TV direct.
• Off : The output resolution will be fixed
according to the Resolution previously set,
regardless of the resolution of the disc.
✎ NOTE

• 4:3 Pan-Scan
Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
• 16:9 Wide
You can view the full 16:9 picture on
your widescreen TV.
Sets the output resolution of the HDMI video signal.
The number in 576p/480p, 720p, 1080i and 1080p
indicates the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
• 576p/480p : Outputs 576/480 lines of progressive video.
• 720p : Outputs 720 lines of progressive video.
• 1080i : Outputs 1080 lines of interlaced video.
• 1080p : Outputs 1080 lines of progressive video.
• BD Wise : Automatically sets the optimal resolution when
connected via HDMI to a TV with the BD Wise feature. (The
BD Wise menu item appears only if BD Wise is set to On.)
✎ NOTE
✎ NOTE



Resolution
• 4:3 Letter Box


This will optimize the picture quality according
to the content (In the DVD disc, etc) that you
want to play and the product or your BD
Wise-compliant Samsung TV.
If you want to change the resolution in BD Wise
mode, you must set BD mode to Off in advance.
BD Wise will be disabled if the product is
connected to a device that does not support
BD Wise.
When using HDMI, the screen is automatically converted to the
16:9 Wide mode and TV Aspect is deactivated.
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.
BD Wise
(Samsung products only)
BD Wise is Samsung's latest inter-connectivity
feature. When you connect Samsung products with
BD-Wise to each other via HDMI, the optimum
resolution will be set automatically.


If Composite is connected, the resolution
supports only 576i/480i.
1080P may not appear depending on TV.
HDMI Format
You can optimize the color setting from the HDMI
output. Select a connected device Type.
• Monitor : Select if connected to a Monitor via HDMI.
• TV : Select if connected to a TV via HDMI.
Video Out Signal(option)
Different countries apply different TV standard.
You can select from NTSC or PAL.
• NTSC : You can select the NTSC video format
• PAL : You can select the PAL video format
24
English
03
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Surround
Speakers, as well as Test Tone in this mode.
Settings
Delay Time
Speaker Setting
Speaker Size
►
Sound Edit
Delay Time
Test Tone
mMove
Adjusting Center/Surround/Subwoofer Level
 The volume level can be adjusted in steps from
+6dB to –6dB.
 The sound gets louder as you move closer to +6dB
and quieter as you get closer to -6dB.
: Off
" Select ' Return
" Select ' Return
• For the Front, the mode is set to Small.
• For the Subwoofer, the mode is set to Present.
• For the Center and Surround, you can switch the
mode to Small or None.
- Small : Select this when using the speakers.
- None : Select this when no speaker is
connected.
If the speakers cannot be placed at equal distances from
the listening position, you can adjust the delay time of the
audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can
enjoy the best sound if the distance between you
and each speaker is the same.
Since the sounds arrive at the listening position at
different times depending on the placement of
speakers, you can adjust this difference by adding a
delay effect to the Center and Surround Speakers.
Settings
Delay Time
Front
✎ NOTE

The speaker mode may vary depending on the
Dolby Pro Logic and Stereo settings.
Center
: 00ms
Surround
: 00ms
Subwoofer
Test Tone
Sound Edit
: Off
<Change " Select
mmove
You can adjust the balance and level for each speaker.
' Return
" Select
' Return
✎ NOTE
Settings
Sound Edit
Front Bal.
dB L
R
dB
Surround Bal.
dB L
R
dB
Center Level
dB
Surround Level
dB
SW Level
dB

The Delay Time menu will be activated only when a
5.1 channel source is played.

You can not set Center and Surround in this mode
when their Speaker Size is set to NONE.
<Change " Select ' Return
mMove " Select ' Return
Press the ▲▼ buttons to select and adjust the
desired speaker.
Press the ◄► buttons to adjust the settings.
English
25
Setup
Adjusting Front/Surround Bal.
 You can select between 0 and -6.
 The volume decreases as you move closer to –6.
Audio
Setup
Ideal Center
Speaker placement
Test Tone
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
Ideal Surround
Speaker placement
Place all speakers within this circle.
Df: The distance from Front Speaker
Dc: The distance from Center Speaker
Ds: The distance from Surround Speaker
Setting the Center Speaker
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between 0.00m 0.34m 0.68m 1.06m 1.40m 1.76m
Df and Dc
Delay
Time
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
mMove
: On
►
" Select ' Return
" Select ' Return
Use the Test Tone feature to check the speaker
connections.
• Press the ◄► buttons to select On.
• The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Surround Right ➞ Surround
Left ➞ Subwoofer in order.
To stop the test tone, press the ENTER button.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
• You can select either Full, 6/8, 4/8, 2/8, off.
AUDIO SYNC
Setting the Surround Speaker
If the distance of Dc is equal to or longer than the
distance of Ds in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between 0.00m 1.06m 2.11m 3.16m 3.62m 5.29m
Ds and Dc
Delay
Time
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
✎ NOTE



With
PL II (Dolby Pro Logic II), the delay time
may be different for each mode.
With AC-3 and DTS, the delay time can be set
between 00 and 15mSEC.
The Center channel is only adjustable on 5.1
channel discs.
26
English
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
03
The audio signals transmitted over the HDMI Cable
can be changed Home Theater/TV Speaker.
• Home Theater : Video is transmitted over the
HDMI connection cable only, and
audio is output through the
product speakers only.
• TV Speaker : Both video and audio signals are
transmitted over the HDMI
connection cable, and audio is
output through your TV speakers
only.
✎ NOTE

The default setting of this function is Home
Theater .

HDMI Audio is automatically down-mixed to 2ch
for TV speakers.

When TV Selection is set to TV Speaker, PL II /
DSP EQ/P.BASS/GIGA/S.VOL doesn't work.

With Speaker Selection set to 'TV Speaker', the
volume can be adjusted only using the TV remote
control.
Setup
Speaker Selection
✎ NOTE

When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.

Using an ARC (Audio Return Channel)uncertified HDMI cable may cause a problem in
compatibility.

ARC function is only available if an ARCcompliant TV is connected.
System
Karaoke Scoring
Karaoke score display can be toggled On or Off.
• Off : Turns off the karaoke score display.
• On : After the singing, the score is displayed on
the screen.
NOTE
 In D.IN/USB/DIVX/MP3/WMA state,karaoke
scoring does not work.
✎
System
Initial Settings
User EQ
By using the Initial Settings, you can set the language
and TV aspect .
You can configure the equalizer settings manually to
your preference.
✎ NOTE

Settings
If an HDMI cable is connected to the product,
the TV aspect does not appear and it is set to
16:9 Wide automatically.
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
250Hz
600Hz
1kHz
3kHz
6kHz
10kHz 15kHz
a Reset > Adjust < Move ' Return
mMove " Select ' Return
and play DivX(R) VOD content.
✎ NOTE

Audio Return Ch.
You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
• Off : Turn the Audio Return Channel function off.
• Auto : Listen to TV sound from the Home Cinema
speakers if your TV is compatible with the Audio
Return Channel function.

This option is not activated if you select OK.To
activate this option, please activate the DivX(R)
Deactivation.
Even after you reset the system, the settings of
DivX Registration will not be reset.
DivX(R) Deactivation
Select this to get a new registration code.
English
27
Setup
Language
You can select the language you prefer for on-screen
menu, disc menu, etc.
OSD
Language
Disc Menu
Select the language for the on-screen
displays.
Select the language for the disc
menu displays.
Change Password
Select Change and enter the 4-digit password to set
the parental lock using the number buttons on the
remote control.
Settings
Display
Parental Rating : Off
Audio
Password
: Change
►
System
Language
Audio
Select the language for disc audio.
Security
Support
Subtitle
Select the language for disc subtitles.
mMove
a To select a language that does not appear in the
menu, select OTHERS in the Disc Menu, Audio and
Subtitle, and enter the language code of your
country (see page 39).
a You cannot select OTHERS in the OSD Language
menu.
✎ NOTE

The selected language will only appear if it is
supported on the disc.
Security
The Parental Lock function works in conjunction with
DVDs that have been assigned a rating, which helps you
control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
Parental Rating
Select the rating level you want to set.
A larger number indicates that the program is intended
for adult use only. For example, if you select up to Level
6, discs that contain Level 7, 8 will not play.
Enter the password and then press the ENTER button.
- The password is set to "0000" by default.
- Once the setup is complete, you will be taken to the
previous screen.
28
English
" Select
' Return
If you forgot your password
1. Remove the disc.
2. Press and hold the STOP () button on the
remote control for 5 seconds or more. All
settings will revert to the factory settings.
Support
Product Information
Provide the product information such as Model
code, Softrware Version, etc.
Audio CD(CD-DA)/MP3/WMA Playback
BA
1. Press the OPEN/CLOSE () button.
2. Place a disc gently into the tray with the disc's
label facing up.
3. Press the OPEN/CLOSE () button to close
the disc tray.
Track01
1/17
✎ NOTE

Resume function: When you stop disc play, the
product remembers where you stopped, so when
you press PLAY button again, it will pick up
where you left off. (This function works only with
DVDs.)
Press the STOP button twice during playback to
disable the Resume function.

If no buttons are pressed on the product or
remote control for more than 3 minutes when the
product is in Pause mode, it will change to STOP
mode.

The initial screen may appear different, depending
on the content of the disc.

Pirated discs will not play in this product because
they violate the CSS(Content Scrambling System:
a copy protection system) recommendations.
a
will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
• If no button input is made for more than 5 minutes
in Stop or Play (music) mode, the screen saver will
get activated.
• If the product is left in the screen saver mode for
more than 20 minutes, the power will
automatically turn off. (Except during play a music)
0:15 / 3:59
Function DVD/CD
Repeat Play Mode
1. Insert an Audio CD(CD-DA) or an MP3 Disc into the
disc tray.
• For an Audio CD, the first track will be played
automatically.
- Press the #$ buttons to move to the
previous/next track.
• For the MP3/WMA disc, press the ◄►
buttons to select Music, then press the
ENTER button.
- Press the ▲▼◄► buttons to select a
desired file and press the ENTER button.
- Press the  buttons to move to the
previous/next pages.
2. Press the STOP () button to stop playback.
✎ NOTE



Some MP3/WMA-CDs may not play, depending on
the recording mode.
Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played.
English
29
Basic Functions
Disc Playback
04
Basic Functions
Basic Functions
JPEG File Playback
Using the Playback Function
Images captured with a digital camera or camcorder, or
JPEG files on a PC can be stored on a CD and then
played back with this product.
Forward/Reverse Search
dBAD
1. Insert a JPEG disc on the disc tray.
2. Press the ◄► buttons to select Photo, and
then press the ENTER button.
Press the  buttons for Search Function.
3. Press the ▲▼ buttons to select the folder you
want to play, and then press the ENTER button.
4. Press the ▲▼ buttons to select the photo you
want to play, and then press the ENTER button.
• The selected file will play and slide show will
start.
• To stop slide show, press the PAUSE () button.
• You can view the previous/next file by pressing
the ◄,► buttons during the slideshow mode.
1➞2➞3➞4
1➞2➞3➞4
✎ NOTE

No sound is played in search mode.
Skipping Scenes/Songs
ROOT
dBAD
JPEG 1
JPEG 2
Press the #$ buttons.
• Each time the button is pressed during playback,
the previous or next chapter, track or directory
(file) will be played.
• You cannot skip chapters consecutively.
JPEG 3
642 X 352
2010/01/01
Function DVD/CD
Pages
Return
Slow Motion Play
Rotate Function
dD
G
Press the GREEN(B) or YELLOW(C) button during the
PAUSE mode.
• GREEN(B) Button: Rotate 90° counterclockwise.
• YELLOW(C) Button: Rotate 90° clockwise.
✎ NOTE

The maximum resolutions supported by this
product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0
MPixel) for progressive image files.
30
English
Press the PAUSE () button and then  button for
Slow Motion play.
d
D
1 ➞2 ➞3
1 ➞2 ➞3
✎ NOTE


No sound is heard during slow playback.
Reverse slow playback does not work.
04
Using the Title Menu
dD
Press the PAUSE button repeatedly.
• The picture moves forward one frame each time
the button is pressed during playback.
✎ NOTE

No sound is heard during step motion playback.
5 Minute Skip function
D
During playback, press the ◄,► button.
• Playback skips 5 minutes forward whenever you
press the ► button.
• Playback skips 5 minutes backward whenever
you press the ◄ button.
d
For DVDs containing multiple titles, you can view the
title of each movie.
1.
During playback, press the TITLE
MENU button on the remote control.
2. Press the ▲▼◄► buttons to make
the desired selection, then press the
ENTER button.
✎ NOTE

Depending on the disc, menu setup items may
vary and this menu may not be available.
Repeat Playback
dBAD
✎ NOTE

You can operate this function only on the DivX.
TITLE MENU
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B
Repeat) of the DVD/DivX.
Using the Disc Menu
d
Repeat
OFF
You can view the menus for the audio language,
subtitle language, profile, etc.
1. During playback, press the DISC
MENU button on the remote control.
DISC MENU
2. Press the ▲▼◄► buttons to make
the desired selection, then press the
ENTER button.
✎ NOTE

Depending on the disc, menu setup items may
vary and this menu may not be available.
1. During DVD/DivX playback, press the
REPEAT button on the remote control.
2. Press the ▲▼ buttons to select a
desired repeat mode, then press the
ENTER button.
REPEAT
3. Press the ▲▼ buttons to select OFF to return
to normal play, then press the ENTER button.
Z
D
Title ➞ Chapter ➞ A - ➞ Off
Title ➞ Folder ➞ All ➞ Off
English
31
Basic Functions
Step Motion Play
Basic Functions
CD/MP3 Repeat
Displaying Disc Information
1. During the CD/ MP3 playback, press the
REPEAT button repeatedly to select the repeat
mode you want.
B
d
1/1
2/20
(Repeat Off Repeat Track Repeat All Random Repeat Section A-B)
0:05:21
1/1 EN AC3 5.1
1/1 EN
A
1/1
(Repeat Off Repeat Track
Repeat Dir (Directory) Repeat All Random)
Change
Select
D
A-B Repeat Playback
dB
1/6
You can repeatedly play back a designated section
of a DVD or CD.
1/1
1/1 EN
Change
Select
1. During the DVD disc or CD playback, press the
REPEAT button on the remote control.
2. For DVD, press the ▲▼ buttons to select A-.
For CD press the REPEAT button repeatedly
until
appears.
3. Press the ENTER button at the point where you
want repeat play to start (A).
1. During playback, press the TOOLS
button on the remote control.
TOOLS
4. Press the ENTER button at the point where you
want repeat play to stop (B).
2. Press the ▲▼ buttons to select the
desired item.
5. To return to normal playback,
For DVD, press the REPEAT button ,then press
the ▲▼ buttons to select to OFF. For CD, press
the REPEAT button to select to .
3. Press the ◄► buttons to make the
desired setup change and then press the
ENTER button.
- You may use the number buttons of the
remote control to control some items.
✎ NOTE

The A-B Repeat function does not operate with
DivX, MP3 or JPEG discs.

Repeat function is not available during CD/DVD
disc is played if karaoke scoring is set to on.
4. To make Disc information disappear, press the
TOOLS button again.
✎ NOTE



32
English
If you are playing contents from the tools menu, some
functions may not be enabled depending on the disc.
You can also select DTS, Dolby Digital or Pro Logic,
depending on the disc.
Some tools menus may differ depending on discs and
files.
04
 Title(





) : To access the desired title
when there is more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified as a Title.
Chapter(
) : Most DVD discs are
recorded in chapters so that you can
quickly find a specific chapter.
Playing time( ) : Allows playback of
the film from a desired time. You must
enter the starting time as a reference.
The time search function does not
operate on some discs.
Audio(
): Refers to the film's
soundtrack language. A DVD Disc can
contain up to 8 audio languages.
Subtitle(
): Refers to the subtitle
languages available in the disc. You will
be able to choose the subtitle languages
or, if you prefer, turn them off from the
screen. A DVD Disc can contain up to
32 subtitle languages.
Angle(
): When a DVD contains
multiple angles of a particular scene, you
can use the Angle function.
3. Press the ◄► buttons to select the desired
subtitle language.
• Depending on the languages on a DVD disc,
a different subtitle language is selected each
time the button is pressed.
✎ NOTE

Depending on the disc, the Subtitle and Audio
Language functions may not be available.
Caption Function
D
• You must have some experience with video
extraction and editing in order to use this feature
properly.
• To use the caption function, save the caption file
(*.smi) in the same file name as that of the DivX
media file (*.avi) within the same folder.
Example. Root
Samsung_007CD1.avi
Samsung_007CD1.smi
• Up to 100 alphanumeric characters or 50 East
Asian characters (2 byte characters such as
Korean and Chinese) for the file name.
• The subtitle of DivX files are *.smi, *.sub, *.srt over
148 kbyte is not supported.
Selecting the Audio Language
dD
Angle Function
d
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select AUDIO (
display.
)
This function allows you to view the same scene in
different angles.
3. Press the ◄► buttons to select the desired
audio language.
• Depending on the of languages on a DVD
disc, a different audio language is selected
each time the button is pressed.
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select ANGLE (
display.
)
3. Press the ◄► buttons to select the desired
angle.
Selecting the Subtitle Language
dD
✎ NOTE

The Angle function works only with discs on
which multiple angles have been recorded.
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select SUBTITLE (
display.
)
English
33
Basic Functions
TOOLS menu
Basic Functions
SLEEP
GIGA
You can set the time that the Home Cinema will shut
itself off.
The GIGA Sound Function amplifies bass and improves bass
twice as much for you to appreciate powerful real sound.
The GIGA Sound feature will be applied only to the
subwoofer.
Press the SLEEP button.
ECHO
• Each time the button is pressed, the
selection changes as follows
10 MIN 20 MIN 30 MIN 60 MIN 90 MIN 120 MIN 150 MIN OFF.
✎ NOTE

Sleep function doesn't work when you connect
the microphone to the set in DVD/USB/D.IN
mode.
DIMMER
Press the GIGA button.
✎ NOTE

The GIGA Sound works when in 2-channel LPCM
mode only.

GIGA doesn't work when connecting the
microphone to the MIC jack.
S.VOL (SMART VOLUME)
You can adjust the brightness of the display on the
main unit.
This will regulate and stabilize the volume level
against a drastic volume change when changing
channels or during a scene transition.
Press the DIMMER button.
Press the S.VOL button.
Sound Mode
S . VOL
• Each time the button is pressed, the
selection changes as follows :
SMART VOLUME ON SMART
VOLUME OFF
P.BASS
The P.BASS function provides a bass boost to reinforce
the low frequencies.
The MP3 ENHANCE function provides
better sound quality by upscaling the
sampling frequency.
Press the P.BASS button.
S/W LEVEL
You can also press the S/W LEVEL button on the
remote control and use the ◄ or ► buttons to adjust
the level of subwoofer.
Press the S/W LEVEL button.
2 Channel
LPCM source
POWER BASS ON ➞
POWER BASS OFF
MP3 file
MP3 ENHANCE ON ➞
POWER BASS ON ➞
POWER BASS OFF
✎ NOTE


The P.BASS function is only available with 2 channel
LPCM sources such as MP3, DivX, CD and WMA.
The MP3 Enhancement function is only available
MP3 file.
34
English
04
Dolby Pro Logic II Mode
• DSP (Digital Signal Processor) : DSP modes have
been designed to simulate different acoustic
environments.
• EQ : You can select POPS, JAZZ , ROCK, or USER
to optimize the sound for the genre of music you are
playing.
You can select the desired Dolby Pro Logic II audio
mode.
Press the
PL II button.
DSP /EQ
Press the DSP/EQ button.
POPS,
JAZZ,
ROCK
USER
Select POPS, JAZZ, or ROCK,
depending on the genre of music
you're listening to.
You can enjoy music as you set in
“EQ:USER ”.
If you press ENTER in the “EQ:USER”
menu, you will see a window where you
can change the EQ settings to your
preference.
STUDIO
Provides a sense of presence as if in a
studio.
CLUB
Simulates the sound of a dance club
with a throbbing bass beat.
HALL
Provides a clear vocal as if listening in a
concert hall.
MOVIE
Provides the feeling of a movie cinema.
CHURCH
OFF
MUSIC
When listening to music, you can
experience sound effects as if you are
listening to the actual performance.
MOVIE
Adds realism to the movie soundtrack.
PROLOG
You can listen to a 2CH sound source
in 5.1CH surround sound with all
speakers active.
- A specific speaker(s) may not be
output depending on the input signal.
MATRIX
You will hear multi-channel surround
sound.
STEREO
Select this to listen to sound from the
front left and right speakers and the
subwoofer only.
✎ NOTE

Provides the feeling of being in a
grand church.
Select this for normal listening.

✎ NOTE



When selecting Pro Logic II mode, connect
your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only
one of the inputs (L or R), you cannot listen to
surround sound.
The Pro Logic II function is only available in
Stereo mode.
The DSP/EQ function is only available in Stereo
mode.
The DSP/EQ function is not available while
playing AC3 signal in 2.1 channel mode.
Some regional EQs are special,such as
India,Africa,and so on.Please refer to the display
of actual product to operate.
English
35
Basic Functions
DSP (Digital Signal Processor)/EQ
Basic Functions
Listening to Radio
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
• Preset Tuning 1 : You must first add a
desired frequency as a preset. Press the
STOP () button to select PRESET and
then press the TUNING/CH (
) button to
select the preset station.
• Manual Tuning : Press the STOP () button
to select MANUAL and then press the
TUNING/CH
(
) button to tune in to a lower or higher
frequency.
• Automatic Tuning : Press the STOP ()
button to select MANUAL and then press
and hold the TUNING/CH (
) button to
automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the
sound switches between STEREO and
MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the TUNING/CH (
) button to select
<89.10>.
3. Press the TUNER MEMORY button.
• Number flashes on the display.
4. Press the TUNING/CH (
) buttons
to select preset number.
• You can select between 1 and 15 presets.
36
English
5. Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
number disappears from the display.
• Number disappears from the display and the
station is stored in memory.
6. To preset another station, repeat steps 2 to 5.
• To tune in to a preset station, press the
TUNING/CH (
) buttons on the remote
control to select a channel.
05
Advanced Functions
Playing Media Files using the
USB Host Feature
You can enjoy media files such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 5.1
channel sound by connecting the storage device to
the USB port of the product.
AUX IN 1
MIC 1
5V 500mA
MIC 2
1. Connect the USB device to the USB port on the
front panel of the product.
2. Press the FUNCTION button to select USB.
• USB appears on the display screen and then
disappears.
3. Press the ◄► buttons to select Videos, Photos
or Music.
- Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the USB
device, perform safe removal before disconnecting
the USB cable.
• Press the YELLOW(C) button.
- REMOVE will appear on the display.
• Remove the USB cable.
✎ NOTE

To listen to your music files with 5.1 channel
sound, you must set the Dolby Pro Logic II
mode to Matrix. (See page 35)

Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
USB Recording
While playing CD-DA (Compact Disc Digital Audio)
using the USB Recording function or listening to the FM
radio or receiving audio source from an external device,
you can record the audio source in the USB memory.
Ex) USB recording of CD-DA audio contents
1. Connect the USB device to your product.
2. Insert the CD-DA disc into the CD tray.
3. Press the USB REC button on the remote control.
• To start recording the current track, press the USB
REC button on the remote control while
the system is playing a track or stopped
temporarily.
• To record the entire CD, press and
hold the USB REC button on the
remote control.
- "FULL RECORDING" appears on the display
and recording starts.
4. Press the STOP () button to stop recording.
• When USB recording of a CD is completed,
you will find a new folder named
“RECORDING” in the USB drive. The
contents will be saved in the folder in the MP3
format.
• When USB recording of FM radio or AUX
source is completed, you will find a new folder
named “TUNER RECORDING or AUX
RECORDING” in the USB drive. The contents
will be saved in the folder in the MP3 format.
NOTE
 Do not disconnect the USB connection or the power cable
during the USB Recording. Otherwise, it may cause damage
to the data.
To stop USB Recording, press the STOP button and
disconnect the USB device after the system stops playing the
CD completely.
 If you disconnect the USB connection during the USB
Recording, the system will turn off and you will not be able to
delete the recorded file.
 If you connect the USB device to the system while it is playing
a CD, the system stops temporarily and will play again.
 DTS-CDs cannot be recorded.
 If the recording duration is less than 5 seconds, a recording file
may not be created.
 USB Recording works only if the USB device is formatted in
the FAT file system. (The NTFS file system is not supported.)
 The audio signal will not be output during USB recording of the
CD in no MIC connecting state.Otherwise,The audio signal will
be output during USB recording of the CD in MIC connecting
state.
 When Speaker selection is set to TV Speaker, the USB
Recording function is not supported.
 Disconnect the microphone to the set during recording,
recording will be stopped.
 The set will be started X3 recording when the Microphone
doesn't connect to the set.
 Any button except Stop /Volume/Mute/ Mic Volume/Echo
button doesn't work during USB recording.
✎
English
37
Advanced Functions
USB Function
Other Information
Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are experiencing is
not listed below or if the instruction below does not help, turn off the product, disconnect the power cord,
and contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only from a
few speakers and not all 6.
• On certain DVD discs, sound is output from the front speakers only.
• Check if the speakers are connected properly.
• Adjust the volume.
• When listening to a CD, radio or TV, sound is output to the front speakers only.
Select "PROLOG" by pressing
PL II (Dolby Pro Logic II) on the remote control to
use all six speakers.
Dolby Digital 5.1 CH Surround
Sound is not produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is
produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information display?
The remote control does not work.
• Is the remote control being operated within its operation range of angle and distance?
• Are the batteries drained?
• Have you selected the correct mode (RECEIVER DVD/TV)?
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles do not work.
• Audio language and subtitles will not work if the disc does not contain them.
The Disc/Title menu screen does not
appear even when the Disc/Title
function is selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN
SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc
jacket and then select the appropriate function.
38
English
06
Other Information
Symptom
Check/Remedy
• The product is not working.
(Example: The power goes out or
the front panel key doesn't work
or a strange noise is heard.)
• The product is not working
normally.
The rating level password has been
forgotten.
Can't receive radio broadcast.
• Press and hold the STOP () button on the remote control for longer than
5 seconds with no disc (reset function).
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of the product, press and hold the
remote control's STOP () button for longer than 5 seconds. “INIT” appears on the
display and all settings will return to the default values.
And then press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with good
reception.
Language code list
Enter the appropriate code number for OTHERS in the Disc Menu, Audio and Subtitle. (See page 28).
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1142
Greek
1239
Interlingue
1345
Malagasy
1482
Kirundi
1527
1028
Abkhazian
1144
English
1245
Inupiak
1347
Maori
1483
Romanian
1528
Tajik
Thai
1032
Afrikaans
1145
Esperanto
1248
Indonesian
1349
Macedonian
1489
Russian
1529
Tigrinya
1039
Amharic
1149
Spanish
1253
Icelandic
1350
Malayalam
1491
Kinyarwanda
1531
Turkmen
1044
Arabic
1150
Estonian
1254
Italian
1352
Mongolian
1495
Sanskrit
1532
Tagalog
1045
Assamese
1151
Basque
1257
Hebrew
1353
Moldavian
1498
Sindhi
1534
Setswana
1051
Aymara
1157
Persian
1261
Japanese
1356
Marathi
1501
Sangro
1535
Tonga
1052
Azerbaijani
1165
Finnish
1269
Yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
Bashkir
1166
Fiji
1283
Javanese
1358
Maltese
1503
Singhalese
1539
Tsonga
1057
Byelorussian
1171
Faeroese
1287
Georgian
1363
Burmese
1505
Slovak
1540
Tatar
1059
Bulgarian
1174
French
1297
Kazakh
1365
Nauru
1506
Slovenian
1543
Twi
1060
Bihari
1181
Frisian
1298
Greenlandic
1369
Nepali
1507
Samoan
1557
Ukrainian
1069
Bislama
1183
Irish
1299
Cambodian
1376
Dutch
1508
Shona
1564
Urdu
1066
Bengali;
Bangla
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
Tibetan
1194
Galician
1301
Korean
1393
Occitan
1511
Albanian
1581
Vietnamese
1070
Breton
1196
Guarani
1305
Kashmiri
1403
(Afan) Oromo
1512
Serbian
1587
Volapuk
1079
Catalan
1203
Gujarati
1307
Kurdish
1408
Oriya
1513
Siswati
1613
Wolof
1093
Corsican
1209
Hausa
1311
Kirghiz
1417
Punjabi
1514
Sesotho
1632
Xhosa
1097
Czech
1217
Hindi
1313
Latin
1428
Polish
1515
Sundanese
1665
Yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
Chinese
1697
Zulu
1105
Danish
1229
Hungarian
1327
Laothian
1436
Portuguese
1517
Swahili
1109
German
1233
Armenian
1332
Lithuanian
1463
Quechua
1521
Tamil
1130
Bhutani
1235
Interlingua
1334
Latvian,
Lettish
1481
RhaetoRomance
1525
Tegulu
English
39
Other Information
Specifications
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
General
FM Tuner
DVD (Digital Versatile Disc)
CD : 12 cm (COMPACT DISC)
Disc
CD : 8cm (COMPACT DISC)
Video Output
Composite Video
Video/Audio
HDMI
Front speaker output
Center speaker output
Surround speaker output
Subwoofer output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Amplifier
2.3 Kg
430 (W) x 61 (H) x 242 (D) mm
+5°C~+35°C
10 % to 75 %
60 dB
10 dB
1%
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
576i(480i)
1 channel : 1.0 Vp-p (75 Ω load)
1080p, 1080i, 720p, 576p/480p
167W x 2(3Ω)
165W(3Ω)
167W x 2(3Ω)
167W(3Ω)
20Hz~20KHz
65dB
60dB
(AUX)800mV
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For the power supply and Power Consumption, refer to the label attached to the product.
HT-E450K
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
40
English
5.1ch speaker system
Front
3Ω
140Hz~20KHz
86dB/W/M
Surround
3Ω
140Hz~20KHz
86dB/W/M
Center
3Ω
140Hz~20KHz
86dB/W/M
167W
167W
165W
334W
334W
330W
Front : 90 x 140 x 70 mm
Surround : 77 x 108 x 70 mm
Center : 228 x 77 x 70 mm
Subwoofer : 200 x 390 x 356 mm
Front: 0.4 Kg, Center : 0.49 Kg
Surround : 0.38 Kg, Subwoofer : 6.06 Kg
Subwoofer
3Ω
20Hz~160Hz
88dB/W/M
167W
334W
06
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
5.1ch speaker system
Front
3Ω
140Hz~20KHz
86dB/W/M
Surround
3Ω
140Hz~20KHz
86dB/W/M
Center
3Ω
140Hz~20KHz
86dB/W/M
Subwoofer
3Ω
20Hz~160Hz
88dB/W/M
167W
167W
165W
167W
334W
334W
330W
334W
Front : 89 x 1053 x 71 mm (stand base : 229 x 229)
Surround : 77 x 108 x 70 mm
Center : 228 x 77 x 70 mm
Subwoofer : 200 x 390 x 356 mm
Front : 3.16 Kg, Center : 0.49 Kg
Surround : 0.38 Kg, Subwoofer : 6.06 Kg
HT-E453HK
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
5.1ch speaker system
Front
3Ω
140Hz~20KHz
86dB/W/M
Surround
3Ω
140Hz~20KHz
86dB/W/M
Center
3Ω
140Hz~20KHz
86dB/W/M
Subwoofer
3Ω
20Hz~160Hz
88dB/W/M
167W
167W
165W
167W
334W
334W
330W
334W
Front : 120 x 612 x 71 mm (stand base : 210 x 210)
Surround : 90 x 141 x 68 mm
Center : 360 x 74 x 68 mm
Subwoofer : 200 x 390 x 356 mm
Front : 1.8 Kg, Center : 0.88 Kg
Surround : 0.62 Kg, Subwoofer : 6.06 Kg
HT-E445K
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
5.1ch speaker system
Front
3Ω
140Hz~20KHz
86dB/W/M
Surround
3Ω
140Hz~20KHz
86dB/W/M
Center
3Ω
140Hz~20KHz
86dB/W/M
Subwoofer
3Ω
20Hz~160Hz
88dB/W/M
167W
167W
165W
167W
334W
334W
330W
334W
Front/Surround : 89 x 1053 x 71 mm (stand base : 229 x 229)
Center : 228 x 77 x 70 mm
Subwoofer : 168 x 350 x 285 mm
Front/Surround : 2.93 Kg, Center : 0.49 Kg
Subwoofer : 3.67 Kg
English
41
Other Information
HT-E453K
Other Information
HT-E455K
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
42
English
5.1ch speaker system
Front
3Ω
140Hz~20KHz
86dB/W/M
Surround
3Ω
140Hz~20KHz
86dB/W/M
Center
3Ω
140Hz~20KHz
86dB/W/M
Subwoofer
3Ω
20Hz~160Hz
88dB/W/M
167W
167W
165W
167W
334W
334W
330W
334W
Front/Surround : 89 x 1053 x 71 mm (stand base : 229 x 229)
Center : 228 x 77 x 70 mm
Subwoofer : 200 x 390 x 356 mm
Front/Surround : 3.16 Kg, Center : 0.49 Kg
Subwoofer : 6.06 Kg
06
OpenSSL License
Other Information
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the
original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses
are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact
openssl-core@openssl.org.
OpenSSL License
Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgment: "This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote
products derived from this software without prior written permission. For written permission, please contact
openssl-core@openssl.org.
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their
names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product
includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.
org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product
includes software written by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared
to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES,
etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
English
43
OpenSSL License
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this
package is used in a product, Eric Young should be given attribution as the author of the parts of the library
used. This can be in the form of a textual message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement:
"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"
The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related
:-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code)
you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.
com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU
Public Licence.]
44
English
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care center.
Area
` North America
Canada
Mexico
U.S.A
Contact Center 
Web Site
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
0800-333-3733
0800-124-421 / 4004-0000
800-SAMSUNG (726-7864)
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
00-1800-5077267
800-7267
0-800-777-08
1-800-682-3180
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
` Latin America
Argentine
Brazil
Chile
Colombia
Costa Rica
Dominica
Ecuador
El Salvador
Guatemala
Honduras
Jamaica
Nicaragua
Panama
Peru
Puerto Rico
Trinidad &
Tobago
Venezuela
Austria
Czech
Denmark
Finland
France
Germany
Hungary
Italia
Kosovo
Luxemburg
Macedonia
Montenegro
Netherlands
Norway
Poland
Portugal
Rumania
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
Belarus
Moldova
810-800-500-55-500
00-800-500-55-500
www.samsung.com/
be (Dutch)
www.samsung.com/
be_fr (French)
www.samsung.com
www.samsung.com
` Asia Pacific
42 27 5755
0810 - SAMSUNG (7267864,
€ 0.07/min)
-
www.samsung.com
Russia
Georgia
Armenia
Azerbaijan
Kazakhstan
Australia
New Zealand
China
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858 / 010-6475 1880
Hong Kong
(852) 3698 4698
India
Indonesia
www.samsung.com
www.samsung.com
www.samsung.com
Japan
Malaysia
www.samsung.com
Philippines
www.samsung.com
www.samsung.com
www.samsung.com
-
Singapore
Thailand
Taiwan
Vietnam
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
www.samsung.com/
ch_fr/(French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
` CIS
www.samsung.com
www.samsung.com
05 133 1999
07001 33 11
062 SAMSUNG (062 726 7864)
800-SAMSUNG (800-726786)
Samsung Zrt., česká organizační
složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
70 70 19 70
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG (726-7864
€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
023 207 777
020 405 888
0900-SAMSUNG
(0900-7267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
/ 022-607-93-33
80820-SAMSUNG (726-7864)
1. 08010 SAMSUNG (72678) doar din reţeaua Romtelecom,
tarif local
2. 021.206.01.10 - din orice
reţea, tarif normal
U.K
Eire
Lithuania
Latvia
Estonia
0-800-502-000
www.samsung.com
Bosnia
Bulgaria
Croatia
0848-SAMSUNG (7267864,
CHF 0.08/min)
Ukraine
1-800-SAMSUNG (726-7864)
02-201-24-18
Switzerland
Uzbekistan
Kyrgyzstan
Tadjikistan
0-800-100-5303
Belgium
Slovakia
Spain
Sweden
Contact Center 
0700 Samsung (0700 726
7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
(GSM: 7799)
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
` Europe
Albania
Area
Serbia
3030 8282 / 1800 110011 /
1800 3000 8282 / 1800 266 8282
0800-112-8888 /
021-5699-7777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864) /
1-800-3-SAMSUNG(726-7864) /
1-800-8-SAMSUNG(726-7864) /
02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232 / 02-689-3232
0800-329-999
1 800 588 889
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.ua
www.samsung.com/
ua_ru
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/
hk_en/
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
` Middle East
Bahrain
Egypt
Jordan
Morocco
Oman
Saudi Arabia
Turkey
U.A.E
8000-4726
08000-726786
800-22273
080 100 2255
800-SAMSUNG (726-7864)
9200-21230
444 77 11
800-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
www.samsung.com
www.samsung.com
` Africa
Nigeria
South Africa
CoAAAAAde Naho. AH68-02259BA
Code No. AH68-02443N
Download PDF

advertising