Samsung | HT-XQ100 | Samsung HT-XQ100 User Manual

01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 2
5.1Ch Stylish Home
Theater System
HT-XQ100
HT-XQ100W
HT-TXQ100
THIS APPLIANCE IS MANUFACTURED BY:
Instruction Manual
AH68-01852B
COMPACT
DIGITAL AUDIO
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 4
Safety Warnings
GB
Use of controls, adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
PREPARATION
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Precautions
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may
become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the
Home Theater to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the
power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1 LASER product.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
Wiring the Main Power Supply Plug(UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug
and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse
fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a main
socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:–
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire
coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
Phones
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
1
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
Protect the player from moisture(i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric fields
(i.e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc has been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The batteries used with this product contain chemicals
that are harmful to the environment.
Do not dispose of batteries in the general household
trash.
2
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 6
Features
Contents
GB
Multi-Disc Playback & FM Tuner
USB Host Play
You can enjoy media files such as pictures, movies and tunes saved in an MP3 player, digital
camera or USB memory by connecting the storage device to the USB port of the home theater.
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in
terms of dynamic range, low-level resolution and high-frequency detail.
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology that
improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers
full-frequency 5.1 channel sound.
TV Screen Saver Function
The HT-XQ100/HT-XQ100W/HT-TXQ100 automatically brightens and darkens your TV
screen after 3 minutes in the stop mode.
The HT-XQ100/HT-XQ100W/HT-TXQ100 automatically switches itself into the power saving
mode after 20 minutes in the screen saver mode.
Power Saving Function
The HT-XQ100/HT-XQ100W/HT-TXQ100 automatically shuts itself off after 20 minutes in the
stop mode.
Customized TV Screen Display
PREPARATION
SETUP
Safety Warnings .................................................................1
Precautions.........................................................................2
Features .............................................................................3
Notes on Discs ...................................................................5
Description..........................................................................7
Setting the Language .........................................................45
Setting TV Screen type ......................................................47
Setting Parental Controls (Rating Level)............................49
Setting the Password .........................................................50
Setting the Wallpaper .........................................................51
DVD Playback Mode ..........................................................53
Setting the Speaker Mode..................................................54
Setting the Delay Time .......................................................55
Setting the Test Tone..........................................................57
Setting the DRC (Dynamic Range Compression) ..............58
Setting the Audio ................................................................59
AV SYNC Setup .................................................................61
Sound Field (DSP)/EQ Function ........................................62
Dolby Pro Logic II Mode.....................................................63
Dolby Pro Logic II Effect.....................................................64
CONNECTIONS
Connecting the Speakers ...................................................11
Installing the DVD player....................................................15
Connecting the optional Wireless Receiving Amplifier .......16
Connecting the Video Out to TV ........................................18
HDMI Function....................................................................19
Connecting External Components......................................21
Connecting the FM Antenna...............................................22
OPERATION
Before Using Your Home Theater ......................................23
Disc Playback .....................................................................26
MP3/WMA-CD Playback ....................................................27
Displaying Disc Information................................................28
JPEG File Playback............................................................29
DivX Playback ....................................................................31
Checking the Remaining Time ...........................................33
Fast/Slow Playback ............................................................34
Skipping Scenes/Songs......................................................34
Repeat Playback ................................................................35
A-B Repeat Playback .........................................................36
Step Function .....................................................................37
Angle Function....................................................................37
Zoom (Screen Enlarge) Function .......................................38
EZ VIEW Function..............................................................38
Bonus Group / Navigating Pages.......................................39
Selecting Audio/Subtitle Language.....................................40
Playing Media Files using the USB HOST feature.............41
Moving Directly to a Scene/Song .......................................43
Using Disc Menu ................................................................44
Using the Title Menu...........................................................44
RADIO OPERATION
Listening to Radio...............................................................65
Presetting Stations .............................................................66
MISCELLANEOUS
Convenient Functions.........................................................67
Operating a TV with the Remote Control ...........................69
Before Calling for Service...................................................71
Cautions on Handling and Storing Discs............................73
Language Code List ...........................................................74
USB Host Feature Supported Products .............................75
Specifications .....................................................................76
The HT-XQ100/HT-XQ100W/HT-TXQ100 allows you to select your favorite image during
JPEG and DVD playback and set it as your background wallpaper.
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture.
Optional Wireless receiver amplifier
3
Samsung ’s optional rear-channel wireless module does away with cables running between
your DVD receiver and rear-channel speakers. Instead,the rear speakers connect to a compact wireless module that communicates with your DVD receiver.
4
PREPARATION
The HT-XQ100/HT-XQ100W/HT-TXQ100 combines the convenience of multi-disc
playbackcapability, including DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, WMA-CD, DivX,
CD-R/RW, and DVD-R/RW, with a sophisticated FM tuner, all in a single player.
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 8
Notes on Discs
GB
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
1
~ 6
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Mark (Logo)
Recorded Signals
Disc Size
Audio + Video
8cm
COMPACT
Audio + Video
VIDEO-CD
DIGITAL VIDEO
COMPACT
AUDIO-CD
Audio
DIGITAL AUDIO
DivX
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the
condition of the disc.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minute as they may not be played back.
not be able to fully play the disc.
12cm
DVD
This product does not support Secure (DRM) Media files.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may
Playable Discs
Disc Type
Disc Recording Format
PREPARATION
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
MPEG4
MP3
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
CD-R/RW DivX Discs
•
•
5
Many DVD discs are encoded with copy protection. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
• Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the
user might not be played.
• Software update for unsupported formats is not supported.
(Example: QPEL, GMC, resolution higher than 720 x 480 pixels, etc.)
• Sections with high frame rate might not be played while playing a DivX file.
• For more information about the formats authorized by DivX Networks, Inc., visit "www.divxnetworks.net".
6
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 10
Description
—Side Panel—
Eject button
Disc Insert Hole
Power (
Video Output Connector
Display
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
Function button
) button
Volume control
button
External Digital Optical
Input Connector
Use this to connect external equipment
capable of digital output.
Headphone Jack
External Audio
Input Connectors
TX Card Connector
Component Video Output
Connectors
USB Port
Connect a TV with component video
inputs to these jacks.
HDMI OUT Port
FM Antenna Connector
button
Play/Pause (
) button
Stop ( ) button
Tuning up & Skip (
) button
Tuning down & Skip (
) button
—Rear Panel—
5.1 Channel Speaker
Output Terminals
Cooling Fan
Cooling Fan
Accessories
Remote Control
7
Video Cable
HDMI Cable
FM Antenna
User's Manual
8
PREPARATION
—Front Panel—
GB
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 12
Description
GB
PREPARATION
—Remote Control—
Insert Remote Batteries
TV button
DVD Receiver button
DVD button
TUNER button
AUX button
USB button
EJECT button
POWER button
1 Remove the battery
cover in the direction
of the arrow.
TV/VIDEO button
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Number(0~9) buttons
REMAIN button
STEP button
SEARCH buttons
CANCEL button
REPEAT button
Play/Pause button
Stop button
Tuning Preset/CD Skip button
VOLUME button
MENU button
TUNING/CH button
MUTE button
RETURN button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Cursor/Enter button
INFO button
PL II EFFECT button
PL II MODE button
TUNER MEMORY button
ZOOM button
SLEEP button
SLOW, MO/ST button
AUDIO button
SUB TITLE button
DSP/EQ button
TEST TONE button
SOUND EDIT button
Range of Operation of the Remote Control
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be
operated at a horizontal angle of up to 30° from the remote control sensor.
DIGEST button
SD/HD button
LOGO button
SLIDE MODE button
DIMMER button
9
HDMI AUDIO, SELECT button
EZ VIEW, NT/PAL button
10
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 14
Connecting the Speakers
GB
HT-TXQ100
HT-XQ100/HT-XQ100W
Center Speaker
Center Speaker
Front Speaker (L)
Front Speaker (R)
Front Speaker (R)
Front Speaker (L)
Subwoofer
Rear Speaker (R)
Rear Speaker (R)
Subwoofer
Rear Speaker (L)
Rear Speaker (L)
Connecting the Speakers
Position of the Home Theater
• Place it on a stand, cabinet shelf, or under the
TV stand.
Front Speakers L R
• Place these speakers in front of your listening posi•
•
tion, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8 feet)
For 55" TVs 3.5~4m (11~13 feet)
1
Rear Speakers SL SR
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers so they face each
2
Insert the black wire into the
black terminal (–) and the red
wire into the red (+) terminal,
and then release the tab.
Black
3
Connect the connecting plugs to the back
of the Home Theater.
• Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
Red
or
other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
the front and center speakers, the rear speakers are used
* toUnlike
handle mainly sound effects and sound will not come from
them all the time.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
Caution
• Do not let children play with or near the speakers.
They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers,
•
11
Press down the terminal
tab on the back of the
speaker.
•
make sure that the polarity (+/–) is correct.
Keep the subwoofer speaker out of reach of children so as
to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
Do not hang on the wall through the duct (hole).
Note
• If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the
speaker. If this occurs, place the speaker
away from your TV set.
12
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 16
Connecting the Speakers
GB
HT-TXQ100
Speaker Packages
HT-XQ100/HT-XQ100W
Please confirm that all the following contents are included in the package.
Speaker Packages
Speaker Accessories
Please confirm that all the following contents are included in the package.
Speaker Accessories
Rear Speaker (2EA)
Subwoofer Speaker
Center Speaker
Speaker Cable (6EA)
Components
Front Speaker (2EA)
Rear Speaker (2EA)
Subwoofer Speaker
Center Speaker
(A) Speaker
(B) Aluminum Bar
(C) Stand Base
(D) Speaker Support
(E) Screws (3 Types of Big, Mid and Small)
Speaker Cable (6EA)
Assembling the Speakers
Set the front speaker on the front stand.
Assemble the (B) Aluminum Bar and the
(C) Stand Base as the figure shows.
To mount the speakers on the wall
Drive a screw into the wall for each speaker and
then hook the front speaker over them.
Have the speaker cable pass through the
Stand Base and Aluminum Bar.
Hook the speakers so
that the screws are in the
position of the figure.
Have the speaker cable pass through the
(D) Speaker Support and
assemble the Speaker Support and the
Aluminum Bar.
Line up the groove of the Speaker Support and
the projection of the Speaker and assemble
the Speaker and the (D) Speaker Support by
pressing them until the Speaker is fixed as the
figure shows.
* If you press too hard, the projection might be
damaged. Take care when you assemble them.
13
Fasten the screws (big size) with a screw driver.
* You have to fasten the screws in all the
three holes.
Caution
Fasten the screws (small-size) with a screw
driver.
* You have to fasten the screws in all the
three holes.
Fasten the screws (mid-size) with a screw
driver onto the rear side of the Speaker
Support as the figure shows.
Connect the speaker cable to the (A) Speaker
paying attention to the polarity of the speaker cable.
* The cable marked with black line is to be
connected to (-).
This is the successfully assembled speaker.
Assemble the other speaker according to the
same procedures.
• Make sure that the TALLBOY type speaker should be installed on the flat and stable area.
Otherwise it may fall down due to external shock.
14
CONNECTIONS
Front Speaker (2EA)
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 18
Installing the DVD player
Connecting the optional Wireless Receiving Amplifier
To connect the rear speakers wirelessly, you have to additionally purchase the wireless receiving module and
TX card from your Samsung retailer.
1
2
Separate the rear cover(A).
cover(A)
Center Speaker
Front Speaker (R)
Front Speaker (L)
Remove the 1 screw of the cover(B).
Subwoofer
3
Put the speaker cable connected to the
Speaker OUT port into the left groove.
cover(B)
Rear Speaker (L)
Rear Speaker (R)
WIRELESS RECEIVER MODULE
4
5
Put the cables connected to the Video OUT,
Component OUT and Audio IN ports into
the right groove.
1
Connect the front, center and
subwoofer speakers, referring to page 12.
2
Insert the TX card into the TX card
connection port on the back of the
main unit.
Fasten the 1 screw on the cover(B).
• Hold the TX card so that the slanted side faces
Slanted side faces
TX CARD
upward and insert the card into the port.
• The TX card enables communication between the
main unit and the wireless receiver.
6
Close the rear cover(A).
3
Connect the left and right rear
speakers to the wireless receiving
module.
4
Plug the power cord of the wireless
receiving module in the wall outlet and
switch the power switch ‘ON’.
Caution
15
• Do not insert a card other than the TX card dedicated for the product. The product might be damaged or it may not be removed easily.
• Do not insert the TX card upside down or in reverse direction.
• Insert the TX card when the main unit is turned off.Inserting the card when it is turned on may cause a problem.
• If the TX Card is inserted in the main unit, the rear speakers don't output sounds.
16
GB
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 20
When you have purchased the wireless receiving module (SWA-3000)
Connecting the Video Out to TV
GB
Choose one of the three methods for connecting to a TV.
Resetting Wireless Communication
Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does
not light up and the "REAR CHK" message blinks on the main unit's display.
Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode.
1
CONNECTIONS
With the main unit turned off, press and
hold the remote control's REMAIN button
for 5 seconds.
• Press the button until the POWER(
) indicator lights
up blue. (The indicator will turn off in 1 second.)
2
METHOD2
With the wireless receiver module
turned on, use a ball point pen or a pair
of tweezers to press the RESET button
on the back of the unit.
METHOD 3
METHOD 1
(supplied)
WIRELESS RECEIVER MODULE
• The Standby/On LED on the front panel of the
wireless receiver module blinks 2 times.
3
Turn on the main unit.
TV
• The Link LED of the wireless receiver module is lit
and the setup is finished.
• If Power Standby mode continues, repeat Steps 1 to
3 above.
Caution
• When the wireless receiving module setting is complete, no audio signal is output from the Rear Speaker OUT ports on the back
of the main unit.
• The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and moisture.
• For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.
• Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode only.
• In 2-CH mode, no sound will be heard from the wireless rear speakers.
METHOD 1 Composite Video ....... (Good Quality)
- Connect the supplied video cable from the VIDEO OUTjack on the side panel of the system to the
VIDEO IN jack on your TV.
METHOD 2 Component ....... (Better Quality)
- If your television is equipped with Component Video inputs, connect a component video cable
(not supplied) from the Pr, Pb and Yjacks on the side panel of the system to the corresponding
jacks on your TV.
METHOD 3 HDMI ....... (Best Quality)
Note
- Connect the HDMI out to the HDMI input on your TV.
• Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the main
unit, some sound interruption may be heard due to interference.
• If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same
frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.
Note
• This product operates in Interlaced scan mode (576i, 480i) for component output.
• The transmission distance of radio wave is about 33 feet, but may vary depending on your operating environment.
If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may not operate at
all, because the radio wave cannot penetrate metal.
17
18
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 22
HDMI Function
HDMI Function
What is HDMI (High Definition Multimedia Interface)?
Resolution Selection
This device transmits DVD video signal digitally without the process of converting to analog.
You can get sharper digital pictures by connecting the video to your TV using an HDMI
connection cable.
• This function allows the user to select screen resolution for HDMI output.
• The audio signals transmitted over the HDMI Cable can be toggled
ON/OFF.
In Stop mode, press and hold the SD/HD (Standard
Definition/High Definition)button on the remote control.
• Resolutions available for the HDMI output are 576P(480P), 720P and 1080i.
• SD(Standard Definition) resolution is 576P(480P) and HD(High
CONNECTIONS
HDMI Audio ON/OFF function
GB
Definition) resolution is 720p/1080i.
Example: If the TV supports resolution up to 576P(480P):
Press the HDMI AUDIO button on the remote
control.
• This toggles between “AUDIO ON” and “AUDIO OFF” on the display.
• AUDIO ON : Both video and audio signals are transmitted over the HDMI
•
connection cable, and audio is output through your TV speakers only.
AUDIO OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home theater speakers only.
Press the SD/HD button.
• A 576P(480P) video signal is output through the HDMI output.
• If the TV does not support the configured resolution, you will not be able
to see the picture properly.
Note
• Since this product has an embedded Video Upscaler function with
Faroudja DCDi technology, it can enhance a 576i(480i) DVD
resolution output to 576P(480P)/720p/1080i.
• You do not have to make separate adjustments, since the Home
Note
• The default setting value of this product is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• If you turn the unit off and on, or switch functions when the HDMI
AUDIO is set to ON, the HDMI AUDIO is automatically set to OFF.
19
Theater and TV will be automatically adjust themselves to the
optimal resolution and aspect ratio if connected to HDMI. (If the TV
is an HDTV and has an HDMI Input jack, output is automatically
converted to 1080i resolution (if supported by the TV).)
• For component video output, only 576i(480i) is supported.
• See your TV owner's manual for more information on how to select
the TV's Video Input source.
20
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 24
Connecting External Components
Connecting the FM Antenna
GB
Connecting an External Digital / Analog Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Analog signal components such as a VCR.
CONNECTIONS
FM Antenna (supplied)
Audio Cable
Optical Cable
(not supplied)
1
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
or right.
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
1 Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2 Slowly move the antenna wire around until you find a location where reception is good, then
2
Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog component.
3
Press AUX on the remote control to select ‘DIGITAL IN / AUX’ input.
fasten it to a wall or other rigid surface.
• Be sure to match connector colors.
Cooling Fan
• Each time the button is pressed, the selection changes as follows: D.IN ➝ USB ➝ AUX
• You can also use the FUNCTION button on the main unit.
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
The mode switches as follows: DVD ➝ D.IN ➝ AUX ➝ USB ➝ FM
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
Note
21
newspaper or cloth, heat may build up inside the unit and fire may result.)
• You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Output jacks on the VCR to this product.
Notes
• This unit does not receive AM broadcasts.
22
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 26
Before Using Your Home Theater
GB
Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are
using, these instructions may vary slightly. Read the instructions carefully before using.
To Operate the TV and DVD Player with a Single Remote Control
2
Press TV button to set the
remote to TV mode.
4
Press TV/VIDEO button to
select VIDEO mode on
your TV.
5
Press DVD RECEIVER
button to switch to DVD
RECEIVER mode.
3
Press the POWER button to
turn on your Samsung TV
with this remote.
6
Press FUNCTION button on
the main unit or DVD button
on the remote to enable
DVD/CD playback.
VIDEO
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
• By default, the video format is set to "PAL".
• "NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button
shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
23
•
• For normal playback, the video format of the disc must be the same as the video
format of your TV.
Note
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs.
See page 69 for more information about remote control operation with other manufacturer's TVs.
24
OPERATION
1
Plug the main unit's power
cord into the AC power
supply.
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 28
Before Using Your Home Theater
Disc Playback
GB
Disc terminology
Groups and tracks (DVD-AUDIO)
• DVD-audio is divided into several large sections called "groups" and
smaller sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
GROUP 1
TRACK 1
TRACK 2
1
Load a disc vertically into the Disc
Insert Hole.
• Insert a disc so that the label side faces forward.
GROUP 2
TRACK 3
TRACK 1
TRACK 2
DVD
VCD
CD
• Playback starts automatically.
Titles and chapters (DVD-VIDEO)
• DVD-video is divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
CHAPTER 2
OPERATION
TITLE 1
CHAPTER 1
2
To eject the disc, press the EJECT
button
TITLE 2
CHAPTER 3
CHAPTER 1
CHAPTER 2
Tracks (Video and music CDs)
• Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called
"track numbers".
Note
• Depending on the content of the disc, the initial screen may appear different.
• Any piracy could not be runnable in the player. Otherwise, it violates the CSS
recommendations.
Caution
• Avoid getting fingerprints on the writing surface of a disc.
It may cause the disc to not read properly.
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
Files (DivX)
• DivX is divided into sections called "files".
Numbers are allotted to these sections. These numbers are called
"file numbers".
FILE 1
Note
25
FILE 2
What is CSS (Content Scrambling System)?
The CSS is a copy protection device that prevents the content of
a DVD from being copied into the HDD of the PC as it is, unlike
other media, executable directly from the PC. And it is also a data
decryption system that decrypts the key encryption with the
encrypted title key (of the DVD title) and the player key (of the
DVD player).
• In this manual, the instructions marked with "DVD ( DVD )" are applicable
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
26
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 30
MP3/WMA-CD Playback
Displaying Disc Information
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3/WMA format can be played.
1
Load the MP3/WMA
disc.
2
• The MP3/WMA menu screen will appear
•
•
and playback will start.
The appearance of the menu depends on
the MP3/WMA disc.
WMA-DRM files cannot be played.
You can view disc playback information on the TV screen.
In Stop mode, use
to select
the album, and then
press the ENTER
button.
• Use
Press INFO button.
• Each time the button is pressed, the display changes as follows:
DVD
to select the track.
VCD
CD
MP3
3
•
4
DivX
JPEG
The information Display disappears from the screen
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated,
that operation is not possible with the disc currently being played.
Press the STOP
button to stop
playback.
The information Display disappears from the screen
• Depending on the disc, the disc
repeat Steps 2 and 3 above.
Note • Depending on the recording mode, some MP3/WMA-CDs may not be played.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track
•
format recorded on the disc.
A section of tracks contained in a DVD-AUDIO disc.
• What is a Title?
Note
• To select another album and track,
• What is a Group?
information display may appear
different.
Depending on the disc, you can
also select DTS, DOLBY DIGITAL,
or PRO LOGIC.
A movie contained in a DVD-VIDEO disc.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called
"chapters".
• What is a Track (File)?
A section of video or a music file recorded on a DVD-AUDIO, CD, or MP3CD.
Screen Display
To play a file icon in the screen,
Press the
button when it is in stop
status and select a desired icon from the top
part of the menu.
• To play music files only, select the
• To view image files only, select the
• To view movie files only, select the
Icon.
• To select all files select the
27
Icon.
Icon.
Icon.
• Music File Icon
• Image File Icon
• Movie File Icon
• All File Icon
DVD display
TITLE display
VCD display
GROUP display
CD display
CHAPTER display
DVD DVD-AUDIO display
AUDIO
TRACK (FILE) display
ELAPSED TIME display
STEREO (L/R) display
REPEAT PLAYBACK display
DOLBY DIGITAL display
AUDIO LANGUAGE display
ANGLE display
SUBTITLE display
28
OPERATION
The information Display disappears from the screen
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
GB
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 32
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this Home Theater.
GB
Digest Function
You can view 9 JPEG images on the TV screen.
1
Slide Mode
Press DIGEST
button during
playback.
2
• JPEG files will be shown in
• The selected image is played for 5 seconds before moving
9 windows.
1
Load the JPEG disc.
2
Press SLIDE MODE button.
to the next image.
To view the previous or next image with 9 windows, press
.
OPERATION
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
Rotate/Flip Function
From top to bottom
From bottom to top
Press Cursor
,
,
,
buttons during playback.
Rectangular shape in the center
button: Flip Vertically
Vertical blinds effect
Each time a new image is displayed, slide modes
(1~11) will be applied randomly and automatically.
button: Rotate 90°
Counterclockwise
Cancels the slide mode.
button: Rotate 90° Clockwise
Original Image
button: Flip Horizontally
Press
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
29
Note
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
30
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 34
DivX Playback
Subtitle Display
• The functions on this page apply to DIVX disc playback.
Press the SUBTITLE button.
Skip Forward/Back
During playback, press the
button.
• Goes to the next file whenever you press
•
GB
button, if there are over
2 files in the disk.
Goes to the previous file whenever you press
over 2 files in the disk.
button, if there are
• Each time you press the button, your selection will toggle between “SUBTITLE (1/1, 1/2 ...)” and “SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
• See number 2 (Caption Function) below for more details concerning Subtitle usage with DIVX discs.
Audio Display
Press the AUDIO button.
• If there are multiple audio tracks on a disc, you can toggle between them.
• Each time you press the button, your selection will toggle between “AUDIO (1/1, 1/2 ...)” and
Fast playback
To play back the disc at a faster speed,
press
or
during playback.
follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
•"
”.
" is displayed when there is one supported language in the disc.
DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology
to provide audio and video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie
at near DVD-quality video and audio.
1. Supported Formats
• This product only supports the following media formats.If both video and audio formats are not
5 Minute Skip function
During playback, press the
,
supported, the user may experience problems such as broken images or no sound.
button.
• Playback skips 5 minutes forward whenever you press
• Playback skips 5 minutes back whenever you press
●
Format
Supported Versions
button.
button.
●
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
Note
31
• DIVX file can be zoomed only in ZOOM X2 mode.
• DivX files have .Avi file extensions, however, not all .Avi files are DivX
and may not be playable in this unit.
AVI
DivX3.11 ~ 5.1
WMV
V1/V2/V3/V7
Supported Audio Formats
Format
Bit Rate
Sampling Frequency
Zoom Function
1
Supported Video Formats
MP3
WMA
80~384kbps
56~128kbps
44.1khz
AC3
128~384kbps
44.1/48khz
• Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to
720*480 pixels (16:9). TV screen resolutions higher than 800 will not be supported.
• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may
experience shaking on the screen during playback.
2. Caption Function
• You must have some experience with video extraction and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX
•
media file (*.avi) within the same folder.
Example. Root
Samsung_007CD1.avi
Samsung_007CD1.smi
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and
Chinese) for the file name.
32
OPERATION
• Each time you press either button, the playback speed will change as
Note
“
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 36
Checking the Remaining Time
Fast/Slow Playback
Fast Playback
DVD
VCD
CD
Slow Playback
MP3
Press the REMAIN button.
Press
• For checking the total and remaining time of a title or chapter
• Each time the button is pressed during playback,
being played.
GB
.
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
the playback speed changes as follows:
DVD
VCD
DivX
Each time the REMAIN button is pressed
DVDAUDIO
TITLE ELAPSED
GROUP ELAPSED
TITLE REMAIN
GROUP REMAIN
CHAPTER ELAPSED
TRACK ELAPSED
CHAPTER REMAIN
TRACK REMAIN
Notes
• No sound is heard during slow play-
Note
• During fast playback of a CD or MP3-CD, sound is heard
only at 2x speed, and not at 4x, 8x, and 32x speeds.
back and step motion playback.
• Reverse slow playback does not
work with DivX.
Skipping Scenes/Songs
Press
VCD
CD
MP3
TRACK ELAPSED
TRACK REMAIN
TRACK REMAIN
TRACK ELAPSED
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track,
or directory (file) will be played.
• You cannot skip chapters consecutively.
DVD
VCD
MP3
TITLE 01/05 CHAPTER 002/040
TOTAL ELAPSED
TOTAL REMAIN
TITLE 01/05 CHAPTER 004/040
• When watching a VCD with a track
33
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
34
OPERATION
DVDVIDEO
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 38
Repeat Playback
A-B Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
VCD
CD
MP3
GB
You can repeatedly play back a designated section of a DVD.
JPEG
DVD
VCD
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
DVDVIDEO
DVDAUDIO
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
1
Press INFO button
twice.
2
Press Cursor button
to move to REPEAT
PLAYBACK ( ) display.
4
Press ENTER
button at the end
of the desired
segment.
• For a VCD, press INFO button
once.
TITLE
Repeatedly plays the selected title.
GROUP
Repeatedly plays the selected group.
MP3
JPEG
VCD
CD
TRACK
Repeatedly plays the selected track.
DIR
Repeatedly plays all tracks in the selected folder.
DISC
Repeatedly plays the entire disc.
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
• When ENTER button is pressed,
the selected position will be stored
in memory.
• The specified segment will be
played repeatedly.
A-
A-B
REPEAT : A—B
OFF
Cancels Repeat Playback.
A -?
REPEAT : A—
To Select a Repeat Playback Mode in the Disc Information Screen
Note
• Repeat playback operation is
not possible with version 2.0
VCD discs if PBC is turned on.
To use Repeat Playback on a
VCD with PBC, you should set
the PBC to OFF in the disc
menu. (See page 44.)
1
2
3
4
Press INFO button twice.
Press Cursor button to move
to REPEAT PLAYBACK ( )
display.
Press Cursor button to select
the desired Repeat Playback
mode.
Press ENTER button.
To return to normal playback, press Cursor
buttons to select
OFF.
DVD
,
Note
VCD
CD
• The A-B Repeat function does not operate with MP3, CD or JPEG discs.
MP3 and JPEG discs, you cannot select Repeat
* For
Play from the information display screen.
35
36
OPERATION
RANDOM
Plays tracks in random order.
(A track that has already been played may be
played again.)
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 40
Step Function
DVD
Zoom (Screen Enlarge) Function
VCD
This function allows you to enlarge a particular area of the displayed image.
DVD
GB
VCD
Press STEP button.
• The picture moves forward one frame each time the button is pressed
1
during playback.
Note
• No sound is heard during slow playback and step motion
playback.
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
3
Press ENTER
button.
• Each time the button is pressed,
the zoom level changes as follows:
SELECT ZOOM POSITION
Angle Function
DVD
This function allows you to view the same scene in different angles.
Press INFO button.
2
1/3
3
1/3
Press Cursor , or numeric buttons to
select the desired angle.
• Each time the button is pressed, the angle changes as follows:
1/3
Note
OPERATION
1
Press Cursor
button to move to
ANGLE ( ) display.
• When a DivX disc is being played, only the 2:1 zoom-in is available.
EZ VIEW Function
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
2/3
3/3
EZ VIEW
EZ VIEW OFF
Note
Note
• The Angle function works only with discs on which multiple
angles have been recorded.
37
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
• This feature is not supported for DivX discs.
38
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 42
Bonus Group / Navigating Pages
Bonus Group
Selecting Audio/Subtitle Language
Audio Language Selection Function
DVDAUDIO
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
1
Press INFO button
twice.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
2
GB
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
FR 3/3
BONUS GROUP
OPERATION
KEY NUMBER :
Subtitle Language Selection Function
Note
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
1
Press INFO button
twice.
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
2
the key number.
Navigating Pages
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
DVDAUDIO
During playback, press the TUNING/CH button
on the remote control.
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be able to select images.
EN 1/3
EN 01/ 03
OFF
Note
• To operate this function, you can also
•
press the Select AUDIO or Select
SUBTITLE buttons on the remote control.
Depending on the disc, the Subtitle
and Audio Language functions may
not be available.
SP 02/ 03
FR 03/ 03
OFF / 03
39
40
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 44
Playing Media Files using the USB HOST feature
GB
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video with 5.1 channel home theater sound by connecting the storage device to the USB port of the home theater.
1
Connect the USB
device to the USB
port on the side of
the unit.
2
Compatible Devices
1. USB devices that support USB Mass Storage v1.0.
(USB devices that operate as a removable disk in Windows
(2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disk in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
Press the FUNCTION
button on the main
unit or the USB button
on the remote control
to select the USB
mode.
• “USB” appears on the display screen
and then disappears.
• USB MENU screen appears on the TV
screen and the saved file is played.
Supported Formats
Still Picture
To stop playback, press the STOP (
) button.
Music
Safe USB Removal
Movie
To prevent damage to the memory stored in the USB device, perform safe removal
before disconnecting the USB cable.
(1) Press the Stop button twice in a row.
The display will show REMOVE ➞ USB.
File
extension
Bit rate
Version
Pixel
Sampling
Frequency
JPG
JPG .JPEG
–
–
640*480
–
44.1kHz
MP3
.MP3
80~384kbps
–
–
WMA
.WMA
56~128kbps
V8
–
44.1kHz
VCD
MPG.MPEG .DAT
1.5Mbps
VCD1.1,VCD2.0
320*480
44.1KHz
WMV
.WMV
4Mbps
V1,V2,V3,V7
720*480
44.1KHz~48KHz
DivX
.AVI,.ASF
4Mbps
DivX3.11~DivX5.1,Xvid
720*480
44.1KHz~48KHz
• Digital Cameras that use PTP protocol or require additional program installation
when connected to a PC are not supported.
• A device using NTFS file system is not supported.
(Only FAT 16/32 (File Allocation Table 16/32) file system is supported.)
Skip Forward/Back
• When there is more than one file, when you press the
• When there is more than one file, when you press the
File name
• CBI (Control/Bulk/Interrupt) is not supported.
(2) Remove the USB cable.
During playback, press the
OPERATION
●
button.
button, the next file is selected.
button, the previous file is selected.
Fast playback
To play back the disc at a faster speed, press
• Some MP3 players, when connected to this product,may not operate depending
on the sector size of their file system.
• The USB HOST function is not supported if a product that transfers media files by
its manufacturer-specific program is connected.
• Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
or
• Each time you press either button, the playback speed will change as follows:
during playback.
• The USB host function of this product does not support all USB devices.
For information on the supported devices, see pages 75.
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
41
42
01_XQ100/TXQ100_GB
2006.5.22
9:04 AM
Page 46
Moving Directly to a Scene/Song
Using Disc Menu
GB
DVD
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
CD
Moving to a Title/Track
2
Press INFO button.
01/05
001/040
0:00:37
1/1
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
03/05
001/002
0:00:01
Moving to a Chapter
Press Cursor ,
buttons to move to
Chapter ( ) display.
3
1
In Stop mode,
press MENU
button.
• When playing a VCD (version
2.0), this toggles between PBC
ON and OFF.
1/1
01/05
001/040
0:00:01
Press Cursor ,
buttons or numeric buttons
to select the desired
chapter and then press
ENTER button.
01/05
025/040
0:00:01
5
1/1
Press Cursor ,
buttons to move to
time display.
supported by the disc, the "This menu is not supported" message appears on the screen.
• Press ENTER button.
ENTER
MOVE
EXIT
ENTER
EXIT
Moving to a Specific Time
6
Press the numeric
buttons to select the
desired time and then
press ENTER button.
• Disc menu display may be different depending on the disc.
Note
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions
may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
01/05
025/040
1:17:30
1/1
01/05
028/040
1:30:00
1/1
Using the Title Menu
DVD
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, the availability of this feature may vary.
MP3
JPEG
Press the numeric
buttons.
• The selected file will be played.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move to a folder.
To move a folder, press (Stop) and
then press
, .
Note
1
In Stop mode,
press MENU
button.
• You can press
•
on the
remote control to move directly to the
desired title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title
or time.
3
Press ENTER
button.
• The title menu appears.
MOVE
43
2
Press Cursor ,
button to move to
‘Title Menu’.
ENTER
EXIT
MOVE
ENTER
EXIT
Press MENU button to exit the setup screen.
Note
• Title menu display may be different depending on the disc.
44
OPERATION
4
Moving to a Specific Time
• When you select Disc Menu and it is not
3
Press Cursor ,
, buttons to
select the desired
item.
1/1
MOVE
Moving to a Chapter
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 42
Setting the Language
GB
OSD (On-Screen Display) language is set to English by default.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Select ‘Language’
and then press
ENTER button
4
Press Cursor ,
button to select ‘OSD
Language’ and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, the OSD will be
English if English has been selected as language.
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
Press MENU button to exit the setup screen.
Note
• To select another language, select OTHER and enter the language code of your country.
(See page 74 for language codes)
AUDIO, SUB TITLE and DISC MENU language can be selected.
MOVE
ENTER
RETURN
Selecting the
OSD Language
MOVE
45
SELECT
RETURN
EXIT
EXIT
MOVE
ENTER
RETURN
EXIT
Selecting the
Audio Language
(recorded on the disc)
MOVE
ENTER
RETURN
EXIT
Selecting the
Subtitle Language
(recorded on the disc)
MOVE
ENTER
RETURN
EXIT
Selecting the Disc Menu
Language (recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
46
SETUP
Press RETURN button to return to the previous level.
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 44
Setting TV Screen type
GB
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
• For a standard TV, select either "4:3LB" or "4:3PS" option according to personal preference.
Select "16:9" if you have a widescreen TV.
WIDE
MOVE
3
ENTER
MOVE
EXIT
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
4
ENTER
• You can enjoy the widescreen aspect.
EXIT
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
4:3LB
(4:3 Letterbox)
4:3PS
(4:3 Pan&Scan)
EXIT
MOVE
SELECT
RETURN
EXIT
SETUP
RETURN
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Note
ENTER
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
be taken to the previous screen.
MOVE
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
47
48
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 46
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
In Stop mode,
press MENU
button.
2
Setting the Password
You can set the password for the Parental (rating level) setting.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
1
Press MENU button.
MOVE
MOVE
3
4
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
MOVE
EXIT
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
EXIT
ENTER
3
5
Enter the password
and then press
ENTER button.
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
Note
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
Press ENTER
button.
EXIT
Enter the password
and then press
ENTER button.
password, and confirm new password.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
INPUT NUMBER
RETURN
• This function works only if a DVD disc contains the rating level information.
ENTER
RETURN
EXIT
MOVE
SELECT
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
RETURN
EXIT
INPUT NUMBER
RETURN
EXIT
• The password is set to "7890" by default.
EXIT
If you have forgotten the rating level password, do the following:
• While the player is in the no disc mode, hold the main unit's
49
5
ENTER
• The setting is complete.
Note
ENTER
MOVE
EXIT
ENTER
• Enter the old password, a new
MOVE
MOVE
4
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
SETUP
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
ENTER
GB
on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
button for longer than 5 seconds. “INITIALIZE” appears
50
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 48
Setting the Wallpaper
JPEG
DVD
GB
VCD
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when an image you
like appears.
To select one of the 3 wallpaper settings you've made
Press LOGO
button.
2
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
MOVE
3
The power will
turn off and then
back on.
4
•
Press to select
the desired ‘USER’,
and then press
ENTER.
5
ENTER
EXIT
MOVE
ENTER
RETURN
EXIT
Press MENU
button to exit the
setup screen.
SETUP
• The selected wallpaper will be
MOVE
EXIT
ENTER
• This selects one of the 3
displayed.
You can select up to 3 wallpaper
settings.
wallpaper screens
MOVE
SELECT
RETURN
EXIT
Press RETURN button to return to the previous level.
MOVE
51
SELECT
RETURN
EXIT
Select this to set the
Samsung Logo image as
your wallpaper.
MOVE
SELECT
RETURN
EXIT
Press MENU button to exit the setup screen.
Select this to set the desired
image as your wallpaper.
52
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 50
DVD Playback Mode
Setting the Speaker Mode
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
Press the EJECT
button and then
press the MENU
button.
MOVE
2
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
MOVE
EXIT
ENTER
1
In Stop mode,
press MENU
button.
3
4
2
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
3
EXIT
ENTER
In the Speaker
Setup, press the
ENTER button again.
• Set steps 1 ~ 4 again if you want to
MOVE
4
RETURN
EXIT
MOVE
SELECT
RETURN
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
EXIT
When Selecting DVD Play Mode:
Note
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
SETUP
•
ENTER
EXIT
ENTER
• For C, SL, and SR, each time the button
switch to DVD AUDIO Play mode.
MOVE
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
EXIT
ENTER
MOVE
Press Cursor
button to move to
‘DVD TYPE’ and
then press ENTER
button.
GB
MOVE
ENTER
RETURN
EXIT
MOVE
CHANGE
RETURN
EXIT
• DVD VIDEO : set to play the DVD video
• DVD Play mode is set to DVD Audio as
factory default setting.
• Powering off the main unit will automatically
switch to the DVD Audio mode.
•
contents contained on a
DVD audio disc.
DVD AUDIO : set to play the default
DVD audio.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
DivX (R) registration
• Please use the Registration code to register this
player with the DivX (R) video on demand
format. To learn more, go to www.divx.com/vod.
53
MOVE
ENTER
RETURN
EXIT
Note
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 63).
54
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 52
Setting the Delay Time
GB
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of
the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
3
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired speaker
and then press
ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
SL and SR between 00 and
15mSEC.
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
MOVE
CHANGE
RETURN
EXIT
SETUP
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• The Center channel is only adjustable on 5.1 channel discs.
55
•Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0 inch
13.6 inches
27.2 inches
40.8 inches
4.5 feet
5.6 feet
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
•Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0 inch
40.8 inches
6.7 feet
10.0 feet
13.4 feet
16.7 feet
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
56
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 54
Setting the Test Tone
Setting the DRC (Dynamic Range Compression)
Use the Test Tone feature to check the speaker connections.
1
In Stop or no
disc mode,
press MENU
button.
2
GB
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
1
In Stop or no disc
mode, press
MENU button.
2
• The test tone will be sent to L ➝ C ➝
Press Cursor
button to move to
‘Audio’ and then
press ENTER
button.
R ➝ SR ➝ SL ➝ SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
MOVE
MOVE
ENTER
RETURN
3
Press RETURN button to return to the previous level.
STOP
ENTER
MOVE
EXIT
ENTER
EXIT
EXIT
EXIT
4
Press Cursor
, to adjust
the ‘DRC’.
• When the Cursor
button is pressed,
the effect is greater, and when the
Cursor button is pressed, the effect is
smaller.
Alternative method: press the TEST TONEbutton on the remote.
Press TEST TONE button.
• Test tone will be produced as follows:
•
When playing a DVD or CD, this will work only in Stop mode.
Use this function to check that each speaker is correctly
connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
SL: Rear Speaker (L)
SW: Subwoofer
SR: Rear Speaker (R)
Multi-Channel Pro Logic Mode
MOVE
ENTER
RETURN
EXIT
CHANGE
RETURN
EXIT
Start
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
57
58
SETUP
Press MENU button to exit the setup screen.
Press Cursor
button to move to
‘DRC’ and then
press ENTER
button.
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 56
Setting the Audio
GB
You can adjust the balance and level for each speaker.
Method 1
1
In Stop mode,
press MENU
button.
MOVE
3
When adjusting the audio quality using the setup screen
ENTER
RETURN
EXIT
4
ENTER
CHANGE
Adjusting Front Speaker Balance
1
Press SOUND
EDIT button and
then press Cursor
, .
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
Press SOUND
EDIT button and
then press Cursor
, .
2
3
EXIT
Press Cursor ,
buttons to select and
adjust the desired item.
Press the , buttons
to adjust the settings.
MOVE
When manually adjusting with the SOUND EDIT button
RETURN
Adjusting Rear Speaker Level
4
Press SOUND
EDIT button and
then press Cursor
, .
Adjusting Subwoofer Speaker Level
5
Press SOUND
EDIT button and
then press Cursor
, .
SETUP
ENTER
MOVE
EXIT
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
MOVE
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
Method 2
EXIT
Note
Press RETURN button to return to the previous level.
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
Press MENU button to exit the setup screen.
59
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
60
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 58
AV SYNC Setup
Sound Field (DSP)/EQ Function
Video may look slower than the audio if it is connected to a digital TV.
If this occurs, adjust the audio delay time to to match the video.
1
Press the MENU button.
2
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
3
ENTER
Press DSP/EQ button.
• "DSP" appears on the display panel.
• Each time the button is pressed, the selection changes as follows:
• Setup menu appears.
MOVE
MOVE
EXIT
4
ENTER
EXIT
Press Cursor
, buttons
to select the AV-SYNC Delay
Time and then press the
ENTER button.
SETUP
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Note
• DSP/EQ function is only available in STEREO mode.
Press the
PL II mode button to show STEREO on the display.
• This feature works with CDs, MP3-CDs, 2 channel DVD-Audio,
DivX and Dolby Digital discs.
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
• When playing a DVD disc encoded with two or more channels,
multi-channel mode will be selected automatically and DSP/EQ
function does not work.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
61
GB
POP, JAZZ, ROCK: Depending on the genre of music, you can select POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
PASS: Select this for normal listening.
62
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 60
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
• Each time the button is pressed, the mode changes as follows.
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
1
Press
PL II MODE
button to select ‘MUSIC’
mode.
2
• MUSIC: When listening to music, you can experience sound effects as if you are listening
include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five
speakers, while using just the front left and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sound from the front left and right speakers and the
subwoofer only.
3
Press
PL II EFFECT button
to select C-Width, then press
Cursor , buttons to select
the desired effect setting.
• You can select between 0 and 7.
• This sets the width of the center image.
4
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to surround sound.
63
Note
Press
PL II EFFECT button
to select Dimension, then press
the Cursor , buttons to
select the desired setting.
• You can select between 0 and 6.
• Incrementally adjusts the sound field (DSP)from
the front or rear.
SETUP
The higher the setting, the less sound comes from
the center speaker.
• When selecting Pro Logic II mode, connect your external device to the
Press
PL II EFFECT button
to select Panorama, then press
Cursor , buttons to select
the desired effect setting.
• You can select either 0 or 1.
• This mode extends the front stereo image to
PRO LOGIC II
Note
GB
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
64
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 62
Listening to Radio
Remote Control Unit
Press the TUNER
button and select
the FM band.
1
Presetting Stations
GB
Example: Presetting FM 89.1 in the memory
2
Tune in to the
desired station.
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
1
Press the TUNER
button and select the
FM band.
When
is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
automatically search for active
broadcasting stations.
2
Press TUNING/CH
to select "89.10".
3
• Refer to Step 2 on page 65 to
Press the TUNER
MEMORY button.
• “1” flashes in the display.
automatically or manually tune in
to a station.
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
Main Unit
1
Press the
FUNCTION button to
select the FM band.
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
4
Press
to select preset
number.
• You can select between 1 and
5
Press the TUNER
MEMORY button
again.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
‘number’ disappears from the display.
15 presets.
• ‘number’ disappears from the display and
the station is stored in memory.
Press STOP ( ) to select
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
RADIO OPERATION
the STOP ( )
Automatic Tuning 2 Press
button to select "MANUAL"
and then press and hold
button to automatically search the band.
Manual Tuning
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
65
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Note
• This unit does not receive
AM broadcasts.
To tune in to a preset station, press
remote control to select a channel.
on the
66
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 64
Convenient Functions
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Press SLEEP button.
• Each time the button is pressed, the preset time changes as follows:
10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF.
GB
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
appears in the display.
•
• To restore the sound, press the button again.
To confirm the sleep timer setting, press SLEEP button.
• The remaining time before the Home Theater will shut itself off is displayed.
• Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
Using Headphones
Use headphones (not supplied) for private listening pleasure.
Connect the headphones to the HEADPHONE jack for private listening.
Adjusting Display Brightness
You can adjust the brightness of the display on the main unit so it won't interfere
with your movie viewing.
Press DIMMER button.
DARK ➞ BRIGHT.
MISCELLANEOUS
• Each time the button is pressed, the brightness changes as follows:
Caution
• To prevent hearing damage, do not increase the
volume excessively when using headphones.
67
68
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 66
Operating a TV with the Remote Control
GB
TV Brand Code List
When operating a TV with the remote control
1
2
3
4
5
Press TV button to select TV mode.
Press POWER button to turn on the TV.
Point the remote control toward the TV.
While holding down POWER, enter the code
corresponding to your brand of TV.
Code
No.
Brand
1
Admiral (M.Wards)
56, 57, 58
44
MTC
18
2
A Mark
01, 15
45
NEC
18, 19, 20, 40, 59, 60
3
Anam
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12,
46
Nikei
03
13, 14
47
Onking
03
Code
4
AOC
01, 18, 40, 48
48
Onwa
03
5
Bell & Howell (M.Wards)
57, 58, 81
49
Panasonic
06, 07, 08, 09, 54, 66, 67, 73, 74
6
Brocsonic
59, 60
50
Penney
18
7
Candle
18
51
Philco
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
8
Cetronic
03
52
Philips
15, 17, 18, 40, 48, 54, 62, 72
9
Citizen
03, 18, 25
53
Pioneer
63, 66, 80, 91
10
Cinema
97
54
Portland
15, 18, 59
11
Classic
03
55
Proton
40
12
Concerto
18
56
Quasar
06, 66, 67
13
Contec
46
57
Radio Shack
17, 48, 56, 60, 61, 75
14
Coronado
15
58
RCA/Proscan
18, 59, 67, 76, 77, 78, 92, 93, 94
15
Craig
03, 05, 61, 82, 83, 84
59
Realistic
03, 19
16
Croslex
62
60
Sampo
40
17
Crown
03
61
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60,
18
Curtis Mates
59, 61, 63
19
CXC
03
62
Sanyo
19, 61, 65
20
Daewoo
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
63
Scott
03, 40, 60, 61
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
64
Sears
15, 18, 19
15, 57, 64
98
Daytron
40
65
Sharp
22
Dynasty
03
66
Signature 2000 (M.Wards)
57, 58
23
Emerson
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
67
Sony
50, 51, 52, 53, 55
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
24
Fisher
19, 65
68
Soundesign
03, 40
25
Funai
03
69
Spectricon
01
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
15, 16, 17 and 40.
26
Futuretech
03
70
SSS
18
27
General Electric (GE)
06, 40, 56, 59, 66, 67, 68
71
Sylvania
18, 40, 48, 54, 59, 60, 62
28
Hall Mark
40
72
Symphonic
61, 95, 96
29
Hitachi
15, 18, 50, 59, 69
73
Tatung
06
30
Inkel
45
74
Techwood
18
31
JC Penny
56, 59, 67, 86
75
Teknika
03, 15, 18, 25
Point the remote control toward the TV and
press POWER. If the TV turns off or on,
the setting is complete.
Note
• The remote control may not work on some brands of TVs. Also, some operations may not be
possible depending on your brand of TV.
If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
32
JVC
70
76
TMK
18, 40
33
KTV
59, 61, 87, 88
77
Toshiba
19, 57, 63, 71
34
KEC
03, 15, 40
78
Vidtech
18
35
KMC
15
79
Videch
59, 60, 69
36
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
80
Wards
15, 17, 18, 40, 48, 54, 60, 64
37
38
Luxman
18
81
Yamaha
18
LXI (Sears)
19, 54, 56, 59, 60, 62, 63, 65, 71
82
York
40
39
Magnavox
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
83
Yupiteru
03
40
Marantz
40, 54
84
Zenith
58, 79
41
Matsui
54
85
Zonda
01
42
MGA
18, 40
86
Dongyang
03, 54
43
Mitsubishi/MGA
18, 40, 59, 60, 75
MISCELLANEOUS
buttons (0~9).
69
Brand
21
• You can use the TV POWER, VOLUME, CHANNEL, and Numeric
•
No.
70
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 68
Before Calling for Service
GB
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or
if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer
or Samsung Electronics Service Center.
Symptom
I cannot eject the disc.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
Theater.
Make sure that the rating level is correct.
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
• Wipe the disc clean.
Play/Pause button is pressed.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
•
Sound can be heard only
from a few speakers and
not all six.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
correctly customized?
Is the disc severely damaged?
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
•
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Is the remote control being operated within its operation range of
and distance?
The remote control does not angle
• Are the batteries exhausted?
work.
• Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be
changed.
•The main unit is not
working. (Example: The power
them. And depending on the disc, they may work differently.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
goes out or strange noise is heard.)
• The Home Theater is
not working normally.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
72
MISCELLANEOUS
71
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• CD-ROMs and DVD-ROMs cannot be played on this Home
•
Sound is not produced.
Symptom
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 70
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
• Condensation may form if warm air comes into contact with cold parts
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1181
Frisian
1334
Latvian, Lettish
1506
Slovenian
1028
Abkhazian
1183
Irish
1345
Malagasy
1507
Samoan
1032
Afrikaans
1186
Scots Gaelic
1347
Maori
1508
Shona
1039
Amharic
1194
Galician
1349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
1511
Albanian
1045
Assamese
1203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
1209
Hausa
1353
Moldavian
1513
Siswati
1052
Azerbaijani
1217
Hindi
1356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
1357
Malay
1515
Sundanese
1057
Byelorussian
1229
Hungarian
1358
Maltese
1516
Swedish
1059
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
1239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
Turkmen
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1142
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
1166
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
73
74
MISCELLANEOUS
Note
GB
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”
and/or “Disc Menu” (See page 45).
Code
Handling discs
Caution
Language Code List
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 72
USB Host Feature Supported Products
Digital Camera
Product
Finepix-A340
Finepix-F810
Finepix-F610
Finepix-f450
Finepix S7000
Finepix A310
KD-310Z
Finecam SL300R
Finecam SL400R
Finecam S5R
Finecam Xt
Dimage-Z1
Dimage Z1
Dimage X21
Coolpix4200
Coolpix4300
Coolpix 2200
Coolpix 3500
Coolpix 3700
Coolpix 4100
Coolpix 5200
Stylus 410 digital
300-digital
U300
X-350
C-760
C-5060
X1
U-mini
Lumix-FZ20
DMC-FX7GD
Lumix LC33
LUMIX DMC-F1
Optio-S40
Optio-S50
Optio 33LF
Optio MX
Digimax-420
Digimax-400
Sora PDR-T30
Coolpix 5900
Coolpix S1
Coolpix 7600
DMC-FX7
Dimage Xt
AZ-1
Specifications
GB
USB Flash Disk
Company
Type
Fuji
Fuji
Fuji
Fuji
Fuji
Fuji
Konica
Kyocera
Kyocera
Kyocera
Kyocera
Minolta
Minolta
Minolta
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Panasonic
Panasonic
Panasonic
Panasonic
Pentax
Pentax
Pentax
Pentax
Samsung
Samsung
Toshiba
Nikon
Nikon
Nikon
Panasonic
Minolta
Olympus
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Product
Cruzer Micro
Cruzer Mini
Cruzer Mini
SONY Micro Vault
FLEX DRIVE
AnyDrive
XTICK
Micro Mini
iFlash
LG
RiDATA
Company
Type
Sandisk
Sandisk
Sandisk
Sony
Serotech
A.L tech
LG
Iomega
Imation
XTICK(M)
EZDrive
USB 2.0 USB Flash Drive 128M
USB 2.0 128M
USB 2.0 256M
USB 2.0 64MB
USB 2.0 32MB
USB 2.0 128MB
USB 2.0 128M
USB 2.0 128M
USB 2.0 64M
USB 2.0 64M
USB 2.0 64M
MP3 Player
Product
Company
Type
Creative MuVo NX128M
Iriver H320
YH-920
YP-T7
YP-MT6
YP-T6
YP-53
YP-ST5
YP-T5
YP-60
YP-780
YP-35
YP-55
iAUDIO U2
iAUDIO G3
iAudio M3
SI-M500L
H10
YP-T5 VB
YP-53
Creative
Iriver
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Cowon
Cowon
Cowon
Sharp
Iriver
Samsung
Samsung
128 MB MP3 Player
20G HDD MP3 Player
20G HDD MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
HDD MP3 Player
256MB MP3 Player
MP3 Player
MP3 Player
256MB MP3 Player
G
E
N
E
R
A
L
T
F U
N
M E
R
V
I
D
E
O
O
U
T
P
U
T
A
M
P
L
I
F
I
E
R
Power Consumption
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
Component Video
HDMI
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
90W
5 kg
521 x 320 x 178 mm
41°F ~ 95°F
10% ~ 75%
10dB
60dB
0.5%
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Impedance: 85~115
80W x 2(3Ω)
80W
80W x 2(3Ω)
100W(3Ω)
20Hz~20KHz
70dB
60dB
(AUX)400mV
Multi Card Reader
Product
UNICORN
USB 2.0 Card Reader
Company
Type
Unicorn
USB 2.0 7 IN 1 CARD READER UC-601R
Billionton(Taiwan) USB 2.0 Card Reader for SD/MMC/RS-MMC(3-in-1)
MISCELLANEOUS
USB External HDD
Product
CUTIE
MOMOBAY UX-2
75
Company
Type
Serotech
Dvico
POCKET HARD DISK DRIVE
USB 2.0
76
02_XQ100/TXQ100_GB
2006.5.22
9:05 AM
Page 74
Specifications
Memo
HT - XQ100/HT - XQ100W
Speaker system
S
P
E
A
K
E
R
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
5.1ch speaker system
Subwoofer speaker
Front/Center/Rear speaker
3Ω
3Ω
40Hz~200Hz
150Hz~20kHz
85dB/W/M
82dB/W/M
100W
80W
200W
160W
Front
Rear
98 x 482 x 76 mm
98 x 206 x 80 mm
Center
443 x 98 x 76 mm Subwoofer 180 x 364 x 378 mm
Front
Rear
3.3 kg
1.1 kg
Center
Subwoofer 7.1 kg
1 kg
HT - TXQ100
Speaker system
S
P
E
A
K
E
R
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
77
5.1ch speaker system
Subwoofer speaker
Front/Center/Rear speaker
3Ω (DCR 3.4Ω)
3Ω (DCR 3.4Ω)
40Hz~200Hz
150Hz~20kHz
85dB/W/M
82dB/W/M
100W
80W
200W
160W
Front/Rear
Center
Front
Center
98 x 1157 x 76 mm
443 x 98 x 76 mm
6.4 kg
1 kg
Subwoofer
180 x 364 x 378 mm
Subwoofer
7.1 kg
Download PDF

advertising