Samsung | HT-P10 | Samsung HT-P10 User Manual

DIGITAL HOME
THEATER SYSTEM
HT-P10
HT-P11
HT-TP12
THIS APPLIANCE IS MANUFACTURED BY:
Instruction Manual
COMPACT
VIDEO
AH68-01660K
REV:02
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
GB
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
PREPARATION
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Precautions
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may
become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD
player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
1
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household
trash.
2
Features
Contents
GB
PREPARATION
The HT-P10/HT-P11/HT-TP12 combines the convenience of multi-disc playback
capability, including DVD, VCD, CD, MP3-CD, CD-R/RW, and DVD-R/RW, with
a sophisticated FM/AM tuner, all in a single player.
PREPARATION
Multi-Disc Playback & FM /AM Tuner
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Notes on Discs....................................................................................................................................................................5
Description ..........................................................................................................................................................................7
CONNECTIONS
Connecting the Speakers ...................................................................................................................................................11
Connecting the Video Out to TV.........................................................................................................................................13
P.SCAN(Progressive Scan) Function .................................................................................................................................14
Connecting External Component........................................................................................................................................15
Connecting the FM Antenna ...............................................................................................................................................16
OPERATION
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology
that improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater
Systems Inc. It delivers full-frequency 5.1 channel sound.
TV Screen Saver Function
The HT-P10/HT-P11/HT-TP12 automatically brightens and darkens the
brightness of the TV screen after 3 minutes in the stop mode.
The HT-P10/HT-P11/HT-TP12 automatically switches itself into the
power saving mode after 20 minutes in the screen saver mode.
Power Saving Function
The HT-P10/HT-P11/HT-TP12 automatically shuts itself off after 20 minutes in the stop mode.
Disc Playback .....................................................................................................................................................................17
MP3-CD Playback ..............................................................................................................................................................18
DivX Playback.....................................................................................................................................................................19
JPEG File Playback ............................................................................................................................................................21
Displaying Disc Information ................................................................................................................................................22
Fast/Slow Playback ............................................................................................................................................................23
Skipping Scenes/Songs......................................................................................................................................................23
Repeat Playback.................................................................................................................................................................24
A-B Repeat Playback..........................................................................................................................................................25
Step Function......................................................................................................................................................................26
Angle Function....................................................................................................................................................................26
Zoom (Screen Enlarge) Function .......................................................................................................................................27
EZ VIEW Function ..............................................................................................................................................................27
Selecting Audio/Subtitle Language .....................................................................................................................................28
Moving Directly to a Scene/Song .......................................................................................................................................29
Using Disc Menu.................................................................................................................................................................30
Using the Title Menu...........................................................................................................................................................30
SETUP
Setting the Language..........................................................................................................................................................31
Setting TV Screen type.......................................................................................................................................................33
Setting Parental Controls (Rating Level) ............................................................................................................................35
Setting the Password..........................................................................................................................................................36
Setting the Wallpaper .........................................................................................................................................................37
Setting the Speaker Mode ..................................................................................................................................................39
Setting the Test Tone ..........................................................................................................................................................40
Setting the Delay Time .......................................................................................................................................................41
Setting the Audio Quality ....................................................................................................................................................43
Setting the DRC (Dynamic Range Compression) ..............................................................................................................45
AV SYNC Setup..................................................................................................................................................................46
Dolby Pro Logic II Mode .....................................................................................................................................................47
Dolby Pro Logic II Effect .....................................................................................................................................................48
Sound Field (DSP)/EQ Function.........................................................................................................................................49
Sleep Timer Function..........................................................................................................................................................50
Adjusting Display Brightness ..............................................................................................................................................50
Mute Function .....................................................................................................................................................................50
Customized TV Screen Display
RADIO OPERATION
The HT-P10/HT-P11/HT-TP12 allows you to select your favorite image
during JPEG, DVD or VCD playback and set it as your background
MISCELLANEOUS
Listening to Radio ...............................................................................................................................................................51
Presetting Stations..............................................................................................................................................................52
Language Code List............................................................................................................................................................53
Cautions on Handling and Storing Discs............................................................................................................................54
Before Calling for Service...................................................................................................................................................55
Specifications......................................................................................................................................................................57
3
4
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
Disc Recording Format
PREPARATION
VIDEO
GB
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the
1
~ 6
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Mark (Logo)
Recorded Signals
Disc Size
12cm
Audio + Video
DVD
8cm
COMPACT
Audio + Video
VIDEO-CD
COMPACT
Audio
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
DIGITAL VIDEO
AUDIO-CD
Do not use CD-R disk over 700MB/80 minute as much as possible since it may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you
may not be able to fully play the disc.
Playable Discs
Disc Type
condition of the disc.
• Use a 650MB/74 minute CD-R disc.
DIGITAL AUDIO
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect
•
5
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
6
Description
GB
—Rear Panel—
Stop (
Power (
) button
Function button
Open/Close button
COMPONENT VIDEO OUTPUT jacks
) button
Play/Pause (
Disc Tray
) button
Volume buttons
Standby indicator
External Audio Component
Input Connector
Connect a TV with component video inputs to these jacks.
AM Antenna Connector
FM Antenna Connector
5.1 Channel Speaker
Output Terminals
Tuning Up & Skip (
) buttons
Tuning Down & Skip (
) buttons
Cooling Fan
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
P.SCAN indicator
DOLBY DIGITAL indicator
DTS Disc indicator
Accessories
REPEAT indicator
LINEAR PCM indicator
TITLE indicator
PBC indicator
TUNER indicator
GROUP indicator
CHAPTER indicator
STEREO indicator
TRACK indicator
PROGRAM indicator
Remote Control
DSP indicator
MPEG indicator
DVD AUDIO indicator
PRO LOGIC indicator
7
System Status Display
RADIO FREQUENCY
indicator
FM Antenna
Video Cable
AM Antenna
User's Manual
SPEAKER indicator
8
PREPARATION
—Front Panel—
Description
GB
PREPARATION
—Remote Control—
Insert Remote Batteries
TV, DVD POWER button
TUNER MEMORY, P.SCAN button
SLEEP button
OPEN/CLOSE button
DIMMER button
DVD button
1
AUX button
TUNER button
RDS Selection button
REMAIN button
Remove the battery
cover on the back
of the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
CANCEL button
Play/Pause button
Stop button
Tuning Preset/CD Skip button
PL II MODE button
VOLUME button
MENU button
SUB TITLE button
PL II EFFECT button
TUNING/CH button
INFO. button
AUDIO button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Cursor/Enter button
RETURN button
STEP button
ZOOM button
REPEAT button
SLOW, MO/ST button
LOGO COPY button
9
MUTE button
TEST TONE button
SOUND EDIT button
DSP/EQ button
Range of Operation of the Remote Control
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also
be operated at a horizontal angle of up to 30° from the remote control sensor.
DIGEST button
EZ VIEW, NTSC/PAL button
10
Connecting the Speakers
GB
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Center Speaker
C
C
L
Rear Speaker (L)
SW
Front Speaker (L)
LS
L
R
CONNECTIONS
LS
RS
SW
R
RS
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
Front Speakers L R
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at
•
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Subwoofer
Selecting the Listening Position
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
the front and center speakers, the rear speakers are used
* toUnlike
handle mainly sound effects and sound will not come from
Front Speaker (R)
Rear Speaker (R)
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
1
Press and hold the terminal tab.
2
3
Insert the speaker cord.
Release the finger.
1
2
Red
3
Black
them all the time.
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Note
Subwoofer SW
• The position of the subwoofer is not so critical.
• Connect the red cord to the red (+) terminal and the black cord to the black (-)
terminal.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
11
12
Connecting the Video Out to TV
P.SCAN(Progressive Scan) Function
Choose one of the three methods for connecting to a TV.
GB
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire
picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines
displayed in one pass) to create a clear and detailed picture without visible scan lines.
1
Press STOP button.
• When disc is played back, press the STOP button twice so that “STOP”, appears on the display.
2
Press and hold P.SCAN button on the remote control for over 5 seconds.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
CONNECTIONS
repetitively.
METHOD 2
• When you select P.SCAN, "P.SCAN" will appear on the display
METHOD 1
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
Progressive Scan (FULL FRAME)
METHOD 1 Composite Video ............... Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
METHOD 2 Component (Progressive Scan) Video ............... Better Quality
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Note
In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains
every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• When the Progressive scan mode is selected, the VIDEO output do not feed
any signal.
Note
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
13
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
14
Connecting External Component
Connecting the FM Antenna
GB
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
FM Antenna (supplied)
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
FM antenna connection
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
2
Press AUX on the remote control to select AUX.
• Be sure to match connector colors.
1. Connect the FM antenna supplied to the
FM 75Ω COAXIAL terminal.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
• You can also use the FUNCTION button on the main unit.
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
AM antenna connection
1. Connect the AM loop antenna supplied
to the AM and
terminals.
• Insert the black wire into the black terminal and the
white wire into the white terminal.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
The mode switches as follows: DVD/CD ➝ AUX ➝ FM➝ AM.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
15
16
CONNECTIONS
AM Loop Antenna
(supplied)
Disc Playback
MP3-CD Playback
GB
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
MP3
1
Press OPEN/
CLOSE button to
open the disc tray.
2
Load a disc.
3
• Place a disc gently into the
tray with the disc’s label
facing up.
Press OPEN/
CLOSE button to
close the disc tray.
DVD
VCD
1
CD
• Playback starts automatically.
Press the
OPEN/CLOSE button
to open the disc tray,
and then load the
MP3 disc.
2
In Stop mode, use
to select
the album, and then
press the ENTER
button.
4
Press the STOP
button to stop
playback.
• The MP3 menu screen will appear and
playback will start.
Note
• The appearance of the menu depends on
• Depending on the content of the disc, the initial screen may appear different.
the MP3 disc.
OPERATION
To stop playback, press STOP during playback.
• If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.
If PLAY/PAUSE (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY/PAUSE (
) button is pressed, playback starts from the
3
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE (
) button again.
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
• To select another album and track,
repeat Steps 2 and 3 above.
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
• By default, the video format is set to "PAL".
• "NTSC" or "PAL" will appear in the display.
At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
•
• For normal playback, the video format of the disc must be the same as the video format of your TV.
17
Note
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
• MP3 file support: MPEG1 LAYER3 (BITRATE : 128KBPS~320KBPS ,
SAMPLEING FREQ.: 32K/44.1K/48KHz)
18
DivX Playback
GB
Subtitle Display
Skip Forward/Back
Press the SUBTITLE button.
During playback, press the
button.
• Go to the next file whenever you press
•
button, if there are over
2 files in the disk.
Go to the previous file whenever you press
2 files in the disk.
button, if there are over
• Each time you press the button, your selection will toggle between “SUBTITLE ON” (1/1, 1/2 ...) and
“SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
Audio Display
Fast playback
Press the AUDIO button.
To play back the disc at a faster speed,
press and hold
or
during playback.
• Each time you press the button, your selection will toggle between “AUDIO ON” (1/1, 1/2 ...) and
• Each time you press and hold either button, the playback speed will
Note
•"
“
”.
" is displayed when there is one supported audio item in the disc.
DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft based on the MPEG4 so as to provide audio, and
video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie
in DVD-quality video and audio.
5 Minute Skip function
During playback, press the
,
1. Supported Formats
button.
• Go to the screen about 5 minutes after whenever you press
• Go to the screen about 5 minutes earlier whenever you press
button.
button.
• This product only provides the following media formats. If both of the video and audio formats are not
supported simultaneously, the user may experience problems such as broken image or no sound.
●
Supported Video Formats
Format
Surpported Versions
Zoom Function
1
Press ZOOM
button.
●
2
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
Note
19
• DIVX file can be zoomed only in ZOOM X2 mode.
WMA
V1/V2/V3/V7
Supported Audio Format
Format
Bit Rate
Sampling Frequency
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
AVI
DivX3.11 ~ 5.1
MP3
WMA
80~384kbps
56~128kbps
44.1khz
AC3
128~384kbps
44.1/48khz
DTS
N/A
N/A
• Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to
720*480 pixels (16:9). It will not be supported when the screen resolution is higher than 800.
2. Caption Related
• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX
•
media file (*.avi) within the same folder.
Example. Root
Samsung_Bluetek_007CD1.avi
Samsung_Bluetek_007CD1.smi
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and
Chinese) for the file name.
20
OPERATION
change as follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this DVD player.
Displaying Disc Information
GB
You can view disc playback information on the TV screen.
Press INFO button.
• Each time the button is pressed, the display changes as follows:
Press the OPEN/CLOSE button to open the
disc tray, and then load the JPEG disc.
DVD
VCD
CD
MP3
• Playback will start automatically and each image will show
DivX
JPEG
DVD RECEIVER
for 5 seconds before moving to the next image.
SMART NAVI
Something like you
Back for good
Love of my life
More than words
The information display
disappears from the screen
The information display
disappears from the screen
To rotate the image
During playback, press Cursor
, , ,
•
buttons.
Rotate 90° counterclockwise
Rotate horizontally
Rotate 90° clockwise
The information display
disappears from the screen
Note
• Depending on the disc, the disc information display may appear
different.
• Depending on the disc, you can also select DTS, DOLBY
DIGITAL, or PRO LOGIC.
Screen Display
DVD display
DivX display
TRACK (FILE) display
AUDIO LANGUAGE display
DOLBY DIGITAL display
VCD display
MP3 CD display
ELAPSED TIME display
SUBTITLE display
ANGLE display
CD display
TITLE display
CHAPTER display
REPEAT PLAYBACK display
STEREO (L/R) display
Checking the Remaining Time
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter being played.
Each time the REMAIN button is pressed
DVD
21
TITLE ELAPSED
VCD
TRACK ELAPSED
TITLE REMAIN
CD
TRACK REMAIN
CHAPTER ELAPSED
TOTAL ELAPSED
CHAPTER REMAIN
TOTAL REMAIN
22
OPERATION
Rotate vertically
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
Fast/Slow Playback
Repeat Playback
GB
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
Fast Playback
DVD
VCD
CD
Slow Playback
MP3
Press and hold
DVD
Press SLOW button.
.
• Each time the button is held down during playback,
the playback speed changes as follows:
the playback speed changes as follows:
VCD
CD
MP3
JPEG
Press REPEAT button.
• Each time the button is pressed during playback,
DVD
VCD
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
DivX
DVD
MP3
JPEG
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
TITLE
Repeatedly plays the selected title.
Note
TRACK
Repeatedly plays the selected track.
• Reverse slow playback does not
work with VCD and DivX.
VCD
CD
DIR
Repeatedly plays all tracks in the selected
folder.
Skipping Scenes/Songs
Briefly press
DISC
Repeatedly plays the entire disc.
.
OFF
Cancels Repeat Playback.
• Each time the button is pressed briefly during playback, the previous or next chapter, track,
•
or directory (file) will be played.
You cannot skip chapters consecutively.
DVD
VCD
MP3
Note
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
To Select a Repeat Playback Mode in the Disc Information Screen
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
1
2
Press INFO button twice.
3
Press Cursor button
to select the desired
Repeat Playback mode.
4
Press ENTER button.
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
• When watching a VCD with a track
23
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Press Cursor button to
move to REPEAT
PLAYBACK ( ) display.
VCD
• Repeat playback operation is
not possible with version 2.0
VCD discs if PBC is turned
on. To use Repeat Playback
on a VCD with PBC, you
should set the PBC to OFF in
the disc menu. (See page
30.)
DVD
CD
MP3 and JPEG discs, you cannot select Repeat
* For
Play from the information display screen.
24
OPERATION
RANDOM
Plays tracks in random order.
(A track that has already been played may
be played again.)
A-B Repeat Playback
Step Function
DVD
GB
VCD
You can repetitively play back a designated section of a DVD.
Press STEP button.
DVD
1
VCD
• The picture moves forward one frame each time the button is pressed
CD
during playback.
Press INFO button
twice.
2
Press Cursor button
to move to REPEAT
PLAYBACK ( ) display.
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion playback.
• For a VCD or CD, press INFO
button once.
Angle Function
DVD
This function allows you to view the same scene in different angles.
• When ENTER button is pressed,
the selected position will be stored
in memory.
4
Press ENTER
button at the end
of the desired
segment.
1
Press INFO button.
• The specified segment will be
2
Press Cursor
button to move to
ANGLE ( ) display.
1/3
OPERATION
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
1/3
played repeatedly.
A-
A-B
REPEAT : A—B
3
A -?
REPEAT : A—
Press Cursor , or numeric buttons to
select the desired angle.
• Each time the button is pressed, the angle changes as follows:
To return to normal playback, press Cursor
buttons to select
OFF.
,
1/3
2/3
3/3
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
Note
• The Angle function works only with discs on which multiple
angles have been recorded.
25
26
Zoom (Screen Enlarge) Function
This function allows you to enlarge a particular area of the displayed image.
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
DVD
Selecting Audio/Subtitle Language
VCD
Audio Language Selection Function
3
GB
Press ENTER
button.
1
2
Press INFO button
twice.
• Each time the button is pressed, the
zoom level changes as follows:
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SELECT ZOOM POSITION
SP 2/3
FR 3/3
Note
• You can use the AUDIO button on the remote control to
EZ VIEW Function
DVD
Press EZ VIEW button.
Subtitle Language Selection Function
1
Press INFO button
twice.
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
2
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
Note
EN 1/3
EN 01/ 03
SP 02/ 03
Note
27
• You can use the SUBTITLE button on the
FR 03/ 03
OFF / 03
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
OFF
•
remote control to select a subtitle
language.
Depending on the disc, the Subtitle and
Audio Language functions may not work.
28
OPERATION
select a audio language.
Moving Directly to a Scene/Song
Using Disc Menu
GB
DVD
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
VCD
CD
Moving to a Title/Track
Press INFO button.
01/05
001/040
0:00:37
1/1
Press Cursor ,
buttons or numeric buttons
to select the desired
chapter and then press
ENTER button.
01/05
025/040
0:00:01
03/05
001/002
0:00:01
1/1
Press Cursor ,
buttons to move to
time display.
01/05
025/040
1:17:30
1
• When playing a VCD (version
2.), this toggles between PBC
ON and OFF.
01/05
1/1
Moving to a Specific Time
5
3
Press Cursor ,
buttons to move to
Chapter ( ) display.
In Stop mode,
press MENU
button.
001/040
0:00:01
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• When you select the disc menu that is not
3
Press Cursor ,
, buttons to
select the desired
item.
• Press ENTER button.
supported by the disc, the "This menu is not
supported" message appears on the screen.
1/1
Moving to a Specific Time
6
1/1
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
028/040
1:30:00
1/1
Note
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions
may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
Using the Title Menu
DVD
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, the availability of this feature may vary.
MP3
JPEG
Press the numeric
buttons.
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
Note
• You can press
•
on the
remote control to move directly to the
desired title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title
or time.
1
In Stop mode,
press MENU
button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER
button.
• The title menu appears.
from the disc information screen.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
29
Press MENU button to exit the setup screen.
30
OPERATION
Moving to a Chapter
4
2
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
Moving to a Chapter
Setting the Language
GB
OSD (On-Screen Display) language is set to English by default.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Select ‘Language’
and then press
ENTER button
4
Press Cursor ,
button to select ‘OSD
Language’ and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Note
• To select other language, select OTHER and enter the language code of your country.
(See 53 page for language code of countries)
AUDIO, SUB TITLE and DISC MENU language can be selected.
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Disc Menu
Language (recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
31
32
Setting TV Screen type
GB
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the TV's aspect ratio.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a widescreen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
• You can enjoy the widescreen aspect.
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
4:3LB
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
4:3PS
(4:3 Pan&Scan)
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
Note
SETUP
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
be taken to the previous screen.
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
33
34
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
3
4
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
2
5
GB
You can set the password for the Parental (rating level) setting.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Enter the password
and then press
ENTER button.
1
3
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
Press MENU button.
4
Press ENTER
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
SETUP
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
In Stop mode,
press MENU
button.
Setting the Password
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
Note
• The password is set to "7890" by default.
If you have forgotten the rating level password, do the following:
Note
• This function works only if a DVD disc contains the rating level information.
Press RETURN button to return to the previous level.
35
Press MENU button to exit the setup screen.
• While “NO DISC” message appears on the display of main unit, hold the main unit's
button for longer than 5
seconds. “INITIALIZE” appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
36
Setting the Wallpaper
JPEG
DVD
GB
VCD
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when an image you
like appears.
To Change the Wallpaper
Press LOGO
button.
2
1
In Stop mode,
press MENU
button.
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
3
The power will
turn off and then
back on.
SETUP
• The selected wallpaper will be
displayed.
Note
• You can set up to three wallpapers by repeating operation
from Step1 to Step 3.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
37
Select this to set the
Samsung Logo image as
your wallpaper.
Select this to set the desired
image as your wallpaper.
38
Setting the Speaker Mode
Setting the Test Tone
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
1
In Stop mode,
press MENU
button.
2
GB
Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
3
In the Speaker
Setup, press the
ENTER button again.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
Press RETURN button to return to the previous level.
• For C, LS, and RS, each time the button
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
SETUP
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
• Test tone will be produced as follows:
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
39
•
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
Start
40
Setting the Delay Time
GB
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of
the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
3
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0.00 m
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
41
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0.00 m
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
42
Setting the Audio Quality
GB
You can adjust the balance and level for each speaker.
Method 1
1
When adjusting the audio quality using the setup screen
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
When manually adjusting with the SOUND EDIT button
Method 2
Adjusting Front Speaker Balance
1
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
Press SOUND
EDIT button and
then press Cursor
, .
2
TITLE
CHAP PRGM RDS RT
ST
kHz
MHz
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
4
Press Cursor ,
buttons to select and
adjust the desired item.
Press the , buttons
to adjust the settings.
Adjusting Rear Speaker Level
TITLE
CHAP PRGM RDS RT
ST
TUNED
TUNED
TITLE
kHz
MHz
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
Adjusting Subwoofer Speaker Level
5
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
kHz
MHz
ST
SETUP
4
Press SOUND
EDIT button and
then press Cursor
, .
3
TUNED
kHz
MHz
Note
Press RETURN button to return to the previous level.
• The adjustments will appear on the main unit's display, not on your TV screen.
Adjusting Front/Rear Speaker Balance
Press MENU button to exit the setup screen.
43
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
44
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER
button.
AV SYNC Setup
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
Press the MENU button.
• Setup menu appears.
3
Press Cursor
button to move to
‘DRC’ and then
press ENTER
button.
4
Press Cursor
to adjust the
‘DRC’.
• 'Audio' menu appears.
• AV-SYNC screen appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press MENU button to exit the setup screen.
46
SETUP
button is pressed, the
greater the effect, and the Cursor
button is pressed, the smaller the effect.
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
2
,
• The Cursor
45
GB
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
• Each time the button is pressed, the mode changes as follows.
Dolby Pro Logic II Effect
GB
This function works only in Dolby Pro Logic MUSIC mode.
1
Press
PL II MODE
button to select ‘MUSIC’
mode.
2
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select either 0 or 1.
3
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select between 0 and 7.
4
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select between 0 and 6.
SETUP
Note
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
47
and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
Note
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
48
Sound Field (DSP)/EQ Function
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music.
Sleep Timer Function
GB
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
Press DSP/EQ button.
• "SLEEP" will be displayed. Each time the button is pressed the preset
time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF.
TITLE
• "DSP" appears on the display panel.
• Each time the button is pressed, the selection changes as follows:
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
Adjusting Display Brightness
You can adjust the brightness of the display on the main unit so it won't interfere with
your movie viewing.
Press DIMMER button.
SETUP
• Each time the button is press, the brightness changes as follows:
DARK ➞ BRIGHT.
Mute Function
Note
• This feature works with CDs, MP3-CDs and 2 channel DVD-Audio
•
and Dolby Digital discs.
When playing a DVD disc encoded with two or more channels,
multi-channel mode will be selected automatically and DSP/EQ
function does not work.
Note
49
POP, JAZZ, ROCK: Depending on the genre of music, you can select from POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
PASS: Select this for normal listening.
This is useful when answering a doorbell or telephone call.
Press MUTE button.
• ‘MUTE’ flash in the display.
• To switch the sound back on (at the same volume as before),
press MUTE again or the VOLUME buttons.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
50
Listening to Radio
You can listen to the chosen band (FM,AM broadcast stations) by using either the automatic or
manual tuning operation.
Presetting Stations
GB
You can store up to:
15 FM stations
• FM
Frequency Modulation
15 AM stations
• AM
Frequency Modulation
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1
Press TUNER
button.
• The selection toggles back and
forth between "FM ➝ AM" each
time the TUNER button is
pressed.
2
Tune in to the
desired station.
Automatic Tuning 1
Automatic Tuning 2
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
1
Press the TUNER
button and select
the FM band.
• Each time the button is pressed,
the band switches between
"FM ➝ AM".
TITLE
Manual Tuning
CHAP PRGM RDS RT
ST
Briefly press
to
increase or decrease the
frequency incrementally.
2
3
Press
to
select "89.10".
• Refer to Step 2 on page 51 to
Press the TUNER
MEMORY button.
• “PRGM” flashes in the display.
automatically or manually tune in
to a station.
TUNED
TITLE
RDS RT
ST
TITLE
TUNED
RDS RT
ST
TUNED
kHz
MHz
kHz
MHz
kHz
MHz
Main Unit
1
Press the Function
button to select the
desired band
(FM,AM).
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
• You can select between 1 and
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
51
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
15.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
Automatic Tuning 2
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
5
Press the TUNER
MEMORY button
again.
RADIO OPERATION
Press the STOP ( ) button
to select "MANUAL" and
then press and hold
button to
automatically search the band.
4
Press
to select preset
number.
TITLE
RDS RT
ST
TUNED
TITLE
CHAP
RDS RT
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
ST
TUNED
kHz
MHz
on the
52
Cautions on Handling and Storing Discs
Language Code List
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”
and/or “Disc Menu” (See page 31).
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1181
Frisian
1334
Latvian, Lettish
1506
Slovenian
1028
Abkhazian
1183
Irish
1345
Malagasy
1507
Samoan
1032
Afrikaans
1186
Scots Gaelic
1347
Maori
1508
Shona
1039
Amharic
1194
Galician
1349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
1511
Albanian
1045
Assamese
1203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
1209
Hausa
1353
Moldavian
1513
Siswati
1052
Azerbaijani
1217
Hindi
1356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
1357
Malay
1515
Sundanese
1057
Byelorussian
1229
Hungarian
1358
Maltese
1516
Swedish
1059
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
1239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
Turkmen
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Keep in a clean
Protection jacket.
Store vertically.
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1142
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
• When cleaning, wipe gently from the inside to the outside of the disc.
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
Caution
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
54
MISCELLANEOUS
1166
53
GB
Before Calling for Service
GB
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or
if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer
or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
• Make sure that the rating level is correct.
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
• Wipe the disc clean.
Play/Pause button is pressed.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
•
Sound can be heard only
from a few speakers and
not all six.
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
55
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
•
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
The remote control does not • Is the remote control being operated within its operation range of
angle and distance?
work.
• Are the batteries exhausted?
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
them. And depending on the disc, they may work differently.
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
antenna in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
56
MISCELLANEOUS
Dolby Digital 5.1 CH
Surround Sound is not
produced.
correctly customized?
Is the disc severely damaged?
Symptom
Specifications
G
E
N
E
R
A
L
T
F U
N
M E
R
T
U
AM N
E
R
HT-P10
Power Consumption
70W
Weight
3.2Kg
Dimensions (W x H x D)
430 x 60 x 340 mm
Operating Temperature Range
+5°C~+35°C
Operating Humidity Range
10%~75%
Usable Sensitivity
10dB
S/N Ratio
60dB
Distortion
0.5%
Usable Sensitivity
54dB
Dimensions (W x H x D)
S/N Ratio
40dB
Weights
Distortion
2%
Composite Video
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
VIDEO
Component Video
OUTPUT
Front speaker output
A
M
P
L
I
F
I
E
R
GB
S
P
E
A
K
E
R
63W(4Ω)
Rear speaker output
32W(4Ω)/CH
Subwoofer speaker output
64W(8Ω)
Frequency range
20Hz~20kHz
Front/Rear speaker
Center speaker
4Ω x 4
4Ω
8Ω
150Hz~20kHz
150Hz~20kHz
30Hz~150Hz
Impedance
Frequency range
Output sound pressure level
Subwoofer speaker
85dB/W/M
85dB/W/M
86dB/W/M
Rated input
32W
63W
64W
Maximum input
64W
126W
128W
90 x 107 x 95 mm
160 x 90 x 95 mm
145 x 320 x 340 mm
0.36 Kg / 0.3 Kg
0.45 Kg
3.6 Kg
HT-P11
5.1ch speaker system
Speaker system
S
P
E
A
K
E
R
32W(4Ω)/CH
Center speaker output
5.1ch speaker system
Speaker system
Front/Rear speaker
Center speaker
Subwoofer speaker
4Ω x 4
4Ω
8Ω
150Hz~20kHz
150Hz~20kHz
30Hz~150Hz
85dB/W/M
85dB/W/M
86dB/W/M
32W
63W
64W
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
S/N Ratio
75dB
Dimensions (W x H x D)
Channel separation
50dB
Weights
Input sensitivity
(AUX)500mV
64W
126W
128W
85.5 x 156 x 98 mm
300 x 85.5 x 98 mm
145 x 320 x 340 mm
0.5 Kg / 0.35 Kg
0.65 Kg
3.6 Kg
HT-TP12
5.1ch speaker system
Speaker system
57
Rear speaker
Center speaker
Subwoofer speaker
4Ω x 2
4Ω x 2
4Ω
8Ω
150Hz~20kHz
150Hz~20kHz
150Hz~20kHz
30Hz~150Hz
85dB/W/M
85dB/W/M
85dB/W/M
86dB/W/M
Rated input
32W
32W
63W
64W
Maximum input
64W
64W
126W
128W
160 x 90 x 95 mm
145 x 320 x 340 mm
0.45 Kg
3.6 Kg
Impedance
Frequency range
Output sound pressure level
Dimensions (W x H x D)
85 x 1050 x 90 mm 90 x 107 x 95 mm
Weights
3.1 Kg / 2.95 Kg
0.36 Kg / 0.3 Kg
58
MISCELLANEOUS
S
P
E
A
K
E
R
Front speaker
Contact Multi-all
2005.11.18
3:42 PM
Page 8
XEU (ENG)
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Region
North America
Latin America
Europe
CIS
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
RUSSIA
UKRAINE
AUSTRALIA
CHINA
HONG KONG
INDIA
Asia Pacific
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
Middle East & Africa
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
Customer Care Center ☎
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (0,15€/Min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0.10/Min)
231 627 22
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-200-0400
8-800-502-0000
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282
1600 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
Web Site
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.ru
www.samsung.com/ur
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/mea
Download PDF

advertising