Samsung | HTDS700 | Samsung HTDS700 User Manual

DIGITAL HOME
THEATER SYSTEM
HT-DS700
HT-DS900
THIS APPLIANCE IS MANUFACTURED BY:
Instruction Manual
TV DVD RECEIVER
OPEN/CLOSE
DVD
TV/VIDEO
DIMMER
MODE
TUNER
BAND
AUX
EZ VIEW
NTSC/PAL
SLOW
MO/ST
SUB TITLE
STEP
DSP/EQ
REPEAT
VOLUME
TUNING/CH
PL II
MODE
PL II
EFFECT
INFO
TE
MU
RET
UR
N
MENU
ENTER
TEST TONE
SOUND EDIT
TUNER
MEMORY
P. SCAN
SLEEP
CANCEL
ZOOM
LOGO
SLIDE MODE DIGEST
REMAIN
COMPACT
COMPACT
AV SYNC
DIGITAL AUDIO
NA
AH68-01495K
DIGITAL VIDEO
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
PREPARATION
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Precautions
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may
become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD
player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
1
Protect the player from moisture(i.e. vases) , and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household
trash.
2
Features
The HT-DS700/DS900 combines the convenience of multi-disc playback capability,
including DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, DivX, CD-R/RW, and DVDR/RW, with a sophisticated AM/FM tuner, all in a single player.
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail.
Built-in 5.1-Channel Amplifier
The HT-DS700/DS900 comes with a built-in 5.1-channel amplifier, allowing you to enjoy
dynamic sound.
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology that
improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc.
It delivers full-frequency 5.1 channel sound.
TV Screen Saver Function
The HT-DS700/DS900 automatically brightens and darkens the brightness of the TV
screen after 3 minutes in the stop mode.
The HT-DS700/DS900 automatically switches itself into the power saving mode after 20
minutes in the screen saver mode.
Power Saving Function
The HT-DS700/DS900 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
3
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Notes on Discs....................................................................................................................................................................5
Description ..........................................................................................................................................................................7
CONNECTIONS
Connecting the Speakers ...................................................................................................................................................11
Connecting the Video Out to TV.........................................................................................................................................13
P.SCAN(Progressive Scan) Function .................................................................................................................................14
Connecting External Components ......................................................................................................................................15
Connecting the FM and AM Antennas................................................................................................................................18
Before Using Your DVD Player...........................................................................................................................................19
OPERATION
Disc Playback .....................................................................................................................................................................21
Checking the Remaining Time............................................................................................................................................23
MP3-CD Playback ..............................................................................................................................................................24
JPEG File Playback ............................................................................................................................................................25
DivX Playback.....................................................................................................................................................................27
Displaying Disc Information ................................................................................................................................................29
Fast/Slow Playback ............................................................................................................................................................30
Skipping Scenes/Songs......................................................................................................................................................31
Repeat Playback.................................................................................................................................................................32
A-B Repeat Playback..........................................................................................................................................................33
Angle Function....................................................................................................................................................................34
Zoom Function....................................................................................................................................................................35
Bonus Group / Navigating Pages .......................................................................................................................................36
Selecting Audio/Subtitle Language .....................................................................................................................................37
Moving Directly to a Scene/Song .......................................................................................................................................38
Using Disc Menu.................................................................................................................................................................39
Using the Title Menu...........................................................................................................................................................40
SETUP
Setting the Language..........................................................................................................................................................41
Setting TV Screen type.......................................................................................................................................................43
Setting Parental Controls (Rating Level) ............................................................................................................................45
Setting the Password..........................................................................................................................................................47
Setting the Wallpaper .........................................................................................................................................................49
DVD Playback Mode...........................................................................................................................................................51
AV SYNC Setup..................................................................................................................................................................52
Setting the Speaker Mode ..................................................................................................................................................53
Setting the Test Tone ..........................................................................................................................................................54
Setting the Delay Time .......................................................................................................................................................55
Setting the Audio Quality ....................................................................................................................................................57
Setting the DRC (Dynamic Range Compression) ..............................................................................................................59
Sound Field (DSP)/EQ Function.........................................................................................................................................60
Dolby Pro Logic II Mode .....................................................................................................................................................61
Dolby Pro Logic II Effect .....................................................................................................................................................62
The HT-DS700/DS900 allows you to select your favorite image during JPEG, DVD, or
VCD playback and set it as your background wallpaper.
RADIO OPERATION
Convenient AV Device Control Via Anynet
MISCELLANEOUS
You can conveniently control the DVD Home Theater System and other Samsung AV
devices from your Samsung TV with the remote control via Anynet.
PREPARATION
Multi-Disc Playback & AM/FM Tuner
Contents
Listening to Radio ...............................................................................................................................................................63
Presetting Stations..............................................................................................................................................................64
Convenient Functions .........................................................................................................................................................65
Operating a TV with the Remote Control ...........................................................................................................................67
Before Calling for Service...................................................................................................................................................69
Cautions on Handling and Storing Discs............................................................................................................................71
Specifications......................................................................................................................................................................72
Notes on Terminology .........................................................................................................................................................74
4
Notes on Discs
VIDEO
round sound and MPEG-2 video compression technology. Now you can enjoy these realistic
effects in the home, as if you were in a movie theater or concert hall.
PREPARATION
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital sur-
Disc Recording Format
CD-R Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
1
~ 6
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
12cm
DVD-AUDIO
DVD-VIDEO
Audio + Video
8cm
COMPACT
Audio + Video
VIDEO-CD
Audio
AUDIO-CD
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
DIGITAL VIDEO
COMPACT
Max. Playing Time
DIGITAL AUDIO
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect
•
5
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
6
Description
—Rear Panel—
Play/Pause (
Power (
PREPARATION
—Front Panel—
) button
Stop (
) button
) button
Function button
Headphone Jack
Open/Close button
External Digital in Optical Input Connector
Use this to connect external equipment capable of digital output.
Voltage Selector(option)
External Audio
Component Input
Connector
Video Output Connector
Connect the TV's video input
jacks (VIDEO IN) to the VIDEO
OUT connector.
AM Antenna Connector
Volume control
Disc Tray
Tuning Up & Skip (
) buttons
Tuning Down & Skip (
) buttons
5.1 Channel Speaker
Output Terminals
CHAPTER indicator
TRACK indicator
LINEAR PCM indicator
PROGRAM indicator
DTS Disc indicator
DOLBY DIGITAL
TITLE indicator
indicator
REPEAT indicator
GROUP
P.SCAN indicator
DSP indicator
indicator
STEREO indicator
TUNER indicator
P.SCAN
L
C
S
DSP
TITLE GRP CHAP TRK PRGM
RS
ST
Accessories
Remote Control
Audio Cable
Video Cable
FM Antenna
User's Manual
TUNED
PBC
DVD AUDIO MPEG
SPEAKER indicator
DVD AUDIO indicator
kHz
MHz
PBC indicator
MPEG indicator
PRO LOGIC indicator
7
REP.1
FM Antenna Connector
If the TV is equipped with an S- COMPONENT VIDEO
Video input connector (S-VIDEO OUTPUT/INPUT jacks
IN), connect it to the player's SConnect a TV with component video
Video output jack.
input jacks to these jacks.
R
SW
LS
LINEAR PCM
S-Video Output
Connector
AM Antenna
System Status Display
RADIO FREQUENCY
indicator
8
Description
PREPARATION
—Remote Control—
Insert Remote Batteries
TV indicator
DVD RECEIVER indicator
MODE button
TV, DVD POWER button
TV/VIDEO, DIMMER button
OPEN/CLOSE button
DVD button
1
AUX button
TUNER BAND button
SUBTITLE button
SLOW, MO/ST button
REPEAT button
EZ VIEW, NTSC/PAL button
STEP button
DSP/EQ button
Play/Pause button
Remove the battery
cover on the back
of the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
2
Insert two 1.5V AAA
batteries, paying attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Stop button
VOLUME
Tuning Preset/CD Skip button
PL II MODE button
VOLUME button
MENU button
RETURN button
PL II EFFECT button
TUNING/CH button
INFO button
MUTE button
Direction/Enter button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
TEST TONE button
Number(0~9) buttons
SLEEP button
LOGO COPY button
SLIDE MODE button
SOUND EDIT button
TUNER MEMORY / P. SCAN button
ZOOM button
CANCEL button
REMAIN button
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
DIGEST button
9
10
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
C
SW
L
Front Speaker (L)
R
CONNECTIONS
Rear Speaker (L)
L
R
Center Speaker
C
White
Blue
Green
LS
RS
SW
Purple
Subwoofer
Gray
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Front Speakers L R
• Place these speakers in front of your listening posi•
•
tion, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
the front and center speakers, the rear speakers are used
* toUnlike
handle mainly sound effects and sound will not come from
them all the time.
Center Speaker C
• It is best to install it at the same height as the front
•
speakers.
You can also install it directly over or under the TV.
Red
Rear Speaker (R)
R
L
Back of the Speakers
1 Press down the terminal 2 Insert the wire into the tertab on the back of the
speaker.
minal and release the terminal tab.
• Insert the black wire into the black
•
(–) terminal and the gray wire into
the gray (+) terminal.
Make sure the polarities (+ and –)
are correct.
Black
Front Speaker (R)
Back of the Main Unit
3 Connect the connecting jacks to
the back of the DVD player.
• Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
• Make sure the polarities (+ and –) are correctly.
Gray
Subwoofer
• The position of the subwoofer is not so critical.
SW
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
11
12
Connecting the Video Out to TV
P.SCAN(Progressive Scan) Function
Make sure that turn off and disconnect the plug from outlet before moving or installing the product.
In connecting to video, select one of following three methods that suits for TV and connect it.
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
IMPEDANCE SUBWOOFER : 4Ω
FRONT / CENTER / REAR : 4Ω
FRONT
L
SUBWOOFER REAR
R
FRONT
R
Press and hold P.SCAN button on the remote controller for over 5 seconds in
stop mode.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
repetitively.
METHOD 3
What is Progressive (or Non-Interlaced) Scanning?
METHOD 2
Interlaced Scan (1 FRAME = 2 FIELDS)
METHOD 1
Progressive Scan (FULL FRAME)
TV
VIDEO
IN
S-Video
COMPONENT
IN
METHOD 1 Composite Video ............... Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television.
METHOD 2 S-Video ............... Better Quality
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains
every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
METHOD 3 Component (Progressive Scan) Video ............... Best Quality
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
Selecting the Video Format
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off.
Note
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs
do not feed any signal. See page 14 to select Progressive Scan.
• "NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL button shortly to select between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.
13
14
CONNECTIONS
REAR
L
CENTER
Connecting External Components
Connecting an External Analog Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Example: Analog signal components such as a VCR or TV.
CONNECTIONS
Connecting an External Digital Component
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.
Optical Cable
(not included)
DIGITAL OUT
DIGITAL OUT
1
2
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
Press AUX on the remote control to select ‘DIGITAL IN’.
2
Press AUX on the remote control to select AUX 1 or AUX 2.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
15
• Be sure to match connector colors.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
16
Connecting the FM and AM Antennas
If AM reception is poor, connect an outdoor AM antenna(not supplied).
Connecting your System to the Power Supply
AM Loop Antenna
(supplied)
CONNECTIONS
Before plugging your system into an AC outlet, you must check the voltage.
FM Antenna (supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
FM antenna connection
1
Check the position of the voltage selector on the rear of the system (OPTIONAL).
2
Plug the AC Cord on the rear of the system into an appropriate outlet.
3
Press the On/Standby button to switch your DVD Player system on.
Note
The AC Cord must be plugged into an appropriate socket.
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
Cooling Fan
AM antenna connection
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
17
newspaper or cloth, heat may build up inside the unit and fire may result.)
18
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
2
Press the MODE button so
that the TV indicator on the
remote control flashes.
TV
4
Press TV/VIDEO button to
select VIDEO mode.
5
Selecting the Video Format
While the player is turned off, hold the NTSC/PAL down for longer
than 5 seconds.
• Each time the button is pressed for longer than 5 seconds, the video format
switches between "NTSC" and "PAL".
Each country has a different video format standard.
•
• For normal playback, the video format of the disc must be the same as the
video format of your TV.
Press the POWER button to
turn on the TV.
6
Press DVD button to select
DVD/CD mode.
DVD RECEIVER
Press the MODE button so that
the DVD RECEIVER indicator
on the remote control flashes.
TV
3
DVD RECEIVER
To Operate the TV and DVD Player with a Single Remote Control
Press MODE button.
• Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately.
• You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs.
See page 69 for more information on the operation of the remote control.
19
20
CONNECTIONS
1
Plug the power cord into the
AC power supply.
Disc Playback
1
Disc terminology
Press OPEN/CLOSE button to
open the disc tray.
Groups and tracks (DVD-AUDIO)
CONNECTIONS
• DVD-audios are divided into several large sections called "groups" and smaller
2
sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
Load a disc.
GROUP 1
TRACK 1
TRACK 2
GROUP 2
TRACK 3
TRACK 1
TRACK 2
• Place a disc gently into the tray with the
disc’s label facing up.
3
Press OPEN/CLOSE button
to close the disc tray.
DVD
VCD
Titles and chapters (DVD-VIDEO)
• DVD-videos are divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
CD
• Playback starts automatically.
TITLE 1
CHAPTER 1
CHAPTER 2
TITLE 2
CHAPTER 3
CHAPTER 1
CHAPTER 2
Note
• Depending on the content of the disc, the initial screen may
appear different.
Tracks (Video and music CDs)
• Depending on the recording mode, some MP3-CDs cannot
• Video and music CDs are divided into sections called "tracks".
be played.
• Table of contents of a MP3-CD varies depending on the
Numbers are allotted to these sections. These numbers are called "track numbers".
MP3 track format recorded on the disc.
TRACK 1
To stop playback,
press STOP during playback.
TRACK 2
TRACK 3
TRACK 4
TRACK 5
• If pressed once, “PRESS PLAY” is displayed and the
•
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
To temporarily pause playback,
press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE (
ton again.
21
) but-
Note
• In this manual, the instructions marked with "DVD (
DVD )" are applicable
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
22
Checking the Remaining Time
MP3-CD Playback
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
Press the REMAIN button.
1
Each time the REMAIN button is pressed
DVDVIDEO
DVDAUDIO
TITLE ELAPSED
GROUP ELAPSED
TITLE REMAIN
GROUP REMAIN
CHAPTER ELAPSED
TRACK ELAPSED
CHAPTER REMAIN
TRACK REMAIN
VCD
CD
MP3
TRACK ELAPSED
TRACK REMAIN
TRACK REMAIN
TRACK ELAPSED
Press the
OPEN/CLOSE button
to open the disc tray,
and then load the
MP3 disc.
2
In Stop mode, use
to select
the album, and then
press the ENTER
button.
4
Press the STOP
button to stop
playback.
CONNECTIONS
•
For checking the total and remaining time of a title or chapter
being played.
• The MP3 menu screen will appear
and playback will start.
• Depending on the MP3 disc, the
appearance of the menu may be
different.
3
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
• To select another album and track,
repeat Steps 2 and 3 above.
TOTAL ELAPSED
TOTAL REMAIN
Note
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
23
24
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored
on a CD and then played back with this DVD player.
Slide Mode
Digest Function
You can view 9 JPEG images on the TV screen.
1
1
Place the JPEG disc on the disc tray.
Press DIGEST
button during
playback.
2
• JPEG files will be shown in
• The selected image is played for 5 seconds before moving
9 windows.
Press the OPEN/CLOSE button.
• Playback starts automatically.
• Each image is shown for 5 seconds before another image is displayed.
3
to the next image.
OPERATION
2
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
To view the previous or next image with 9 windows, press
.
Press SLIDE MODE button.
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
Rotate/Flip Function
From top to bottom
Press Cursor
,
,
,
buttons during playback.
From bottom to top
Rectangular shape in the center
button: Flip Vertically
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be applied randomly and automatically.
button: Rotate 90°
Counterclockwise
button: Rotate 90° Clockwise
Original Image
Cancels the slide mode.
button: Flip Horizontally
25
Press
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
26
DivX Playback
5 Minute Skip function
During playback, press the
,
button.
• Go to the screen about 5 minutes after whenever you press
• Go to the screen about 5 minutes earlier whenever you press
Skip Forward/Back
During playback, press the
button.
button.
button.
• Go to the next file whenever you press
button, if there are over
2 files in the disk.
• Go to the previous file whenever you press
Subtitle Display
button, if there are over
2 files in the disk.
Press the SUBTITLE button.
• Each time you press the button, your selection will toggle between “SUBTITLE ON” (1/1, 1/2 ...) and
Fast playback
button.
• Each time the button is held down during playback,
OPERATION
Press and hold
“SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
• Up to 8 subtitle languages are supported.
If the disc has more than one subtitle file
the playback speed changes as follows:
If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have
select your subtitle language as follows:
1
2
In Stop mode, press the
button, select the desired subtitle
(
) from the TV screen, and then press the ENTER button.
When you select the desired DivX file from the TV screen, the
movie will be played normally.
DivX Feature Table
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
Zoom Function
SPEC
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
VIDEO Compatibility
AUDIO Compatibility
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
27
Note
Note
• DivX files can be played in
Zoom X2 mode only.
DivX3.11
Up to the latest VERSION
WMV
WMV V1/V2/V3/V7
MP3
CBR : 80kbps~320kbps
AC3
CBR : 128kbps~448kbps
WMA
CBR : 56kbps~160kbps
MPEGs containing DivX can be divided into Video and Audio.
• Video compatibility : All versions of DivX later than 3.11 (including
the latest 5.1) are supported. In addition, XviD is supported.
For WMV, V1, V2, V3, and V7 formats are possible.
• Audio compatibility : MP3s encoded at bitrates from 80kbps to
320kbps, AC3s from 128kbps to 448kbps, and WMAs from 56kbps
to 160kbps are supported.
• In addition, for subtitles, this unit will support Text format (SMI).
• When playing the DivX disk, you can play the file with extension of AVI only.
• Among the available DivX audio formats, DTS Audio is not supported.
• WMV V8 is not supported for WMV files.
• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
• DivX Disc does not playing when its sampling frequency is lower than 32kHz.
28
Displaying Disc Information
Fast/Slow Playback
You can view disc playback information on the TV screen.
Fast Playback
DVD
VCD
CD
MP3
Press INFO button.
Press and hold
• Each time the button is pressed, the display changes as follows:
•
DVD
VCD
CD
MP3
DivX
DVD RECEIVER
JPEG
.
Each time the button is held down during playback,
the playback speed changes as follows:
SMART NAVI
Display disappears
•
OPERATION
Something like you
Back for good
Love of my life
More than words
Display disappears
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
Slow Playback
Display disappears
• What is a Group?
Press SLOW button.
A movie contained in a DVD-AUDIO disc.
Note
• Depending on the disc, the disc informa•
tion display may appear different.
Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
• Each time the button is pressed during playback,
• What is a Title?
the playback speed changes as follows:
A movie contained in a DVD-VIDEO disc.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
DVD
VCD
DivX
• What is a Track (File)?
A section of video or a music file recorded on a DVD-AUDIO, CD, or MP3-CD.
Screen Display
DVD display
VCD display
DivX display
DVD DVD-AUDIO display
AUDIO
CD display
TITLE display
MP3 CD display
GROUP display
CHAPTER display
REPEAT PLAYBACK display
STEREO (L/R) display
TRACK (FILE) display
AUDIO LANGUAGE display
DOLBY DIGITAL display
ELAPSED TIME display
SUBTITLE display
ANGLE display
Note
• Reverse slow playback does not work
with VCD and DivX.
29
30
Skipping Scenes/Songs
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
VCD
MP3
Briefly press
DVD
.
• Each time the button is pressed briefly during playback, the previous or next chapter,
track, or directory (file) will be played.
VCD
CD
MP3
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
• You cannot skip chapters consecutively.
DVD
DVD
VCD
MP3
JPEG
MP3
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
RANDOM
Plays tracks in random order.
(A track that has already been played may
be played again.)
DVD RECEIVER
SMART NAVI
TRACK
Repeatedly plays the selected track.
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
VCD
CD
DIR
Repeatedly plays all tracks in the selected
folder.
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
DISC
Repeatedly plays the entire disc.
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
OFF
Cancels Repeat Playback.
• When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Playing Frame by Frame
DVD
VCD
Press STEP button.
• The picture moves forward one frame each time the
Note
To Select a Repeat Playback Mode in the Disc Information Screen
1
2
Press INFO button twice.
3
Press Cursor button
to select the desired
Repeat Playback mode.
4
Press ENTER button.
button is pressed during playback.
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
31
•
and not at 4x, 8x, and 32x speeds.
No sound is heard during slow playback and step motion playback.
Press Cursor button to
move to REPEAT PLAYBACK (
) display.
VCD
• Repeat playback operation is
not possible with version 2.0
VCD discs if PBC is turned
on. To use Repeat Playback
on a VCD with PBC, you
should set the PBC to OFF in
the disc menu. (See page
39.)
DVD
CD
MP3 and JPEG discs, you cannot select Repeat
* For
Play from the information display screen.
32
OPERATION
TITLE
Repeatedly plays the selected title.
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
A-B Repeat Playback
Angle Function
This function allows you to view the same scene in different angles.
DVD
1
VCD
DVD
CD
Press INFO button
twice.
2
Press Cursor
button to move to
REPEAT PLAYBACK
(
) display.
1
Press INFO button.
2
Press Cursor
button to move to
ANGLE (
) display.
• For a VCD or CD, press INFO
button once.
1/3
• When ENTER button is pressed,
the selected position will be stored
in memory.
4
Press ENTER button at the end of
the desired segment.
• The specified segment will be
played repeatedly.
A-
A-B
3
OPERATION
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
1/3
Press Cursor , or numeric buttons to
select the desired angle.
• Each time the button is pressed, the angle changes as follows:
REPEAT : A—B
1/3
2/3
A -?
3/3
REPEAT : A—
To return to normal playback, press Cursor
buttons to select
OFF.
,
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
33
Note
• The Angle function works only with discs on which multiple
angles have been recorded.
34
Zoom Function
Bonus Group / Navigating Pages
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
1
Press ZOOM button.
2
Press Cursor , ,
, buttons to
move to the area you
want to enlarge.
DVD
3
Bonus Group
VCD
Press ENTER button.
• Each time the button is pressed, the
zoom level changes as follows:
DVDAUDIO
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
SELECT ZOOM POSITIO
OPERATION
KEY NUMBER :
Aspect Ratio
DVD
Note
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
Navigating Pages
and Off.
DVDAUDIO
• When a movie is played in Widescreen format, black bars at the top and bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
During playback, press the
the remote control.
button on
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be able to select images depending on how the
disc was manufactured.
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
35
36
Moving Directly to a Scene/Song
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
Press INFO button
twice.
2
DVD
DVD
Press Cursor ,
buttons or numeric buttons to select the
desired audio language.
1
VCD
CD
Press INFO button.
Moving to a Title/Track
Moving to a Chapter
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
Press Cursor ,
buttons to move to
Chapter ( ) display.
2
3
• Depending on the number of languages on a
01/05
001/040
0:00:37
1/1
03/05
001/002
0:00:01
01/05
1/1
001/040
0:00:01
1/1
SP 2/3
FR 3/3
Moving to a Chapter
Subtitle Language Selection Function
1
3
Press INFO button
twice.
2
DVD
4
Press Cursor
button to move to
SUBTITLE (
)
display.
01/05
MP3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
SP 2/3
025/040
0:00:01
5
1/1
Note
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
from the disc information screen.
• You can use the SUBTITLE button
•
on the remote control to select a
subtitle language.
Depending on the disc, the Subtitle
and Audio Language functions may
not work.
Moving to a Specific Time
Press Cursor ,
buttons to move to
time display.
01/05
025/040
1:17:30
6
1/1
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
FR 3/3
37
Press Cursor , buttons or numeric buttons to
select the desired chapter
and then press ENTER button.
Moving to a Specific Time
Note
• You can press
•
on the
remote control to move directly to the
desired title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title
or time.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
38
OPERATION
DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected
each time the button is pressed.
Using Disc Menu
Using the Title Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
DVD
In Stop mode,
press MENU
button.
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• When playing a VCD (version 2.),
• When you select the disc menu that is not sup-
this toggles between PBC ON and
OFF.
ported by the disc, the "This menu is not supported" message appears on the screen.
1
In Stop mode,
press MENU button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER button.
• The title menu appears.
OPERATION
3
Press Cursor ,
, buttons to
select the desired
item.
4
Press ENTER button.
Press MENU button to exit the setup screen.
Note
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be
disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
39
40
Setting the Language
OSD language is set to English by default.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Press ENTER
button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Menu Language
(recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
41
42
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
TV's aspect ratio.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
4:3LB
3
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
4:3PS
(4:3 Pan&Scan)
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
SETUP
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
be taken to the previous screen.
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
43
44
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
4
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
5
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
SETUP
Note
• This function works only if a DVD disc contains the rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
45
46
Setting the Password
You can set the password for the Parental (rating level) setting.
1
Press MENU button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
4
Press ENTER
button.
5
Enter the password
and then press
ENTER button.
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
SETUP
Note
• The password is set to "7890" by default.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
47
48
Setting the Wallpaper
JPEG
DVD
VCD
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when the image you
like comes up.
To Change the Wallpaper
2
Press LOGO
button.
1
In Stop mode,
press MENU
button.
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
• The selected wallpaper will be
displayed.
4
Press OPEN/
CLOSE to close
the disc tray.
SETUP
3
The power will turn off
and then back on and
the disc tray will open
automatically.
• You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Select this to set the
Samsung Logo image as
your wallpaper.
49
Select this to set the desired
image as your wallpaper.
50
DVD Playback Mode
AV SYNC Setup
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
Press the MENU
button while the
disc tray is open.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
Press the MENU button.
• Setup menu appears.
3
4
• 'Audio' menu appears.
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
• Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode.
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
• AV-SYNC screen appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video
•
contents contained in DVD
audio disc.
DVD AUDIO : set to play the default DVD
audio.
Press RETURN button to return to the previous level.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
51
Note
• DVD Play mode is set to DVD Audio as factory default setting.
Press MENU button to exit the setup screen.
52
SETUP
Press Cursor
button to move to
‘DVD TYPE’ and
then press ENTER
button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
1
Setting the Speaker Mode
Setting the Test Tone
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
3
In the Speaker
Setup, press the
ENTER button again.
4
Press RETURN button to return to the previous level.
• For C, LS, and RS, each time the button
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
SETUP
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
Press MENU button to exit the setup screen.
When manually testing using the TEST TONE button
Press TEST TONE button.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
• Test tone will be produced as follows:
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
53
•
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button.
Start
54
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
3
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0.00 m
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
55
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0.00 m
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
56
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
1
When adjusting the audio quality using the setup screen
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
When manually adjusting with the SOUND EDIT button
Method 2
Adjusting Front Speaker Balance
1
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
Press SOUND
EDIT button and
then press Cursor
, .
2
TITLE
CHAP PRGM RDS RT
ST
kHz
MHz
4
Press Cursor , ,
, buttons to select
the desired item and then
press ENTER button.
Adjusting Rear Speaker Level
4
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
TITLE
kHz
MHz
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
Adjusting Subwoofer Speaker Level
5
TITLE
SETUP
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
TUNED
3
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
kHz
MHz
ST
TUNED
kHz
MHz
Note
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
57
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
58
Setting the DRC (Dynamic Range Compression)
Sound Field (DSP)/EQ Function
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music.
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
3
Press Cursor button to
move to ‘DRC’ and then
press ENTER button.
2
4
Press DSP/EQ button.
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
Press Cursor ,
adjust the ‘DRC’.
• The Cursor
the Cursor
• "DSP" appears on the display panel.
• Each time the button is pressed, the selection changes as follows:
to
SETUP
1
In Stop mode, press
MENU button.
button is pressed, the greater the effect, and
button is pressed, the smaller the effect.
Note
• This feature works with CDs, MP3-CDs and 2 channel DVD-Audio
and Dolby Digital discs.
• When playing a DVD disc encoded with two or more channels,
multi-channel mode will be selected automatically and DSP/EQ
function does not work.
Note
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
59
POP, JAZZ, ROCK: Depending on the genre of music, you can select from POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
PASS: Select this for normal listening.
60
Dolby Pro Logic II Mode
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
• Each time the button is pressed, the mode changes as follows.
Press
PL II MODE
button to select ‘MUSIC’
mode.
1
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
2
• You can select either 0 or 1.
LINEAR PCM
L
C
DSP TITLE PBC CHAP PRGM RDS RT
TA
ST
R
kHz
MHz
RS MPEG-2 AAC MPEG
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
3
LINEAR PCM
L
C
Note
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
DSP TITLE PBC CHAP PRGM RDS RT
TA
ST
TA
ST
CMX
TUNED
kHz
MHz
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
4
TUNED
LINEAR PCM
L
CMX
kHz
MHz
RS MPEG-2 AAC MPEG
Note
DSP TITLE PBC CHAP PRGM RDS RT
R
RS MPEG-2 AAC MPEG
• You can select between 0 and 6.
R
SW
C
SW
LS
C
SW
LS
DSP TITLE PBC CHAP PRGM RDS RT
TA
ST
TUNED
R
CMX
RS MPEG-2 AAC MPEG
kHz
MHz
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
61
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
62
SETUP
• You can select between 0 and 7.
LS
LINEAR PCM
L
CMX
SW
LS
TUNED
Listening to Radio
Presetting Stations
You can store up to:
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
Remote Control Unit
1
• The selection toggles back
Tune in to the
desired station.
Automatic Tuning 1
and forth between "FM ➝ AM"
each time the TUNER(BAND)
button is pressed.
Frequency Modulation
Medium Wave
Press
to
select "89.10".
3
Example: Presetting FM 89.1 in the memory
2
Press TUNER/
BAND button.
• FM
• AM
15 FM stations
15 AM stations
Automatic Tuning 2
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
1
Press the
TUNER(BAND)
button and select the
FM band.
• Each time the button is pressed,
the band switches between
"FM ➝ AM".
TITLE
CHAP PRGM RDS RT
ST
TUNED
2
• Refer to Step 2 on page 63 to
Manual Tuning
• “PRGM” flashes in the
automatically or manually tune in
to a station.
TITLE
CHAP PRGM RDS RT
ST
display. Tune in to a station.
TITLE
TUNED
kHz
MHz
Press the TUNER
MEMORY button.
RDS RT
ST
TUNED
kHz
MHz
kHz
MHz
Briefly press
to
increase or decrease the
frequency incrementally.
Main Unit
1
Press the Function
button to select the
desired band (FM,
AM).
2
Select a broadcast
station.
Press the STOP ( ) button
to select "MANUAL" and
then press and hold
button to
automatically search the band.
• You can select between 1 and
5
Press the TUNER
MEMORY button
again.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
RADIO OPERATION
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
4
Press
to select preset
number.
‘PRGM’ disappears from the display.
15.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
Automatic Tuning 2
TITLE
RDS RT
ST
TUNED
TITLE
CHAP
RDS RT
kHz
MHz
ST
TUNED
kHz
MHz
Press STOP ( ) to select
Manual Tuning MANUAL
and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
63
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
To tune in to a preset station, press
remote control to select a channel.
on the
64
Convenient Functions
Sleep Timer Function
Adjusting Display Brightness
Mute Function
You can set the time that the DVD player will shut itself off.
You can adjust the brightness of the display on the
main unit so it won't interfere with your movie viewing.
This is useful when answering a doorbell or
telephone call.
Press SLEEP button.
Press DIMMER button.
• "SLEEP" will be displayed. Each time the button is pressed
the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝
90 ➝ 120 ➝ 150 ➝ OFF.
TITLE
CHAP PRGM RDS RT
ST
• Each time the button is press, the brightness changes
as follows: SLIGHTLY DARK ➞ DARK ➞ BRIGHT.
Press MUTE button.
• ‘MUTE’ flashes in the display.
• To switch the sound back on, press MUTE again or
the VOLUME buttons.
TITLE
TUNED
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
kHz
MHz
Using Headphones
Use headphones (not supplied) for private listening pleasure.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
Connect the headphones to the PHONES jack for private listening.
earlier.
MISCELLANEOUS
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
Caution
• To prevent hearing damage, do not increase the
volume excessively when using headphones.
65
66
Operating a TV with the Remote Control
When operating a TV with the remote control
1
2
3
4
Press the MODE button to make the TV
indicator on the remote control flash.
TV
DVD RECEIVER
Press POWER button to turn on the TV.
Point the remote control toward the TV.
While holding down POWER, enter the code
corresponding to your brand of TV.
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
No.
Brand
Code
No.
Brand
Code
1
SAMSUNG
00(Initial Value), 01, 02, 03, 04, 05, 73
30
BRANDT
41
2
ANAM
06~11, 59
31
FERGUSON
41
3
DAEWOO
12~18, 20, 21
32
PIONEER
41, 48, 74
4
LG
05, 20, 21, 22, 53
33
TELEAVA
41
5
HITACHI
23, 40, 41, 49
34
FINLUX
05, 42, 47
6
JVC
24, 55
35
FISHER
31
7
SHARP
27, 33, 34, 35, 54
36
AKAI
31
8
SONY
27, 36
37
YOKO
05
9
TOSHIBA
27, 37, 42, 43, 44, 46
38
PHONOLA
05, 45, 47
10
SANYO
27, 30, 31, 32
39
RADIOLA
05, 45
11
MITSUBISHI
05, 27, 28
40
SCHNEIDER
05
12
MATSUSHITA
09, 26
41
NEWSAN
58
13
TELEFUNKEN
41, 49, 51, 57
42
CONTINENTAL EDISON
49
14
RCA
29, 61
43
SALORA
48
15
PANASONIC
07, 09, 26, 48, 49, 50
44
SELECO
48
16
SABA
40, 41, 47, 48, 49
45
NOKIA
48
17
PHILIPS
05, 45, 47, 64, 65, 66, 67, 68, 69
46
REX
48
18
GRUNDIG
39, 42, 46, 70, 71, 72
47
MIVAR
46
19
ZENITH
38
48
IMPERIAL
46
20
MIVAL
52
49
CGE
46
21
NOBLEX
56
50
BANG & OLUFSEN
47
22
EMERSON
19
51
BRIONVEGA
47
23
MAGNAVOX
25
52
FORMENTI
47
24
LOEWE
05, 60
53
METZ
47
25
THOMSON
40, 41, 49, 62, 63
54
WEGA
47
26
NORDMENDE
40, 41, 49
55
RADIOMARELLI
47
27
LOEWE OPTA
36, 47, 05
56
SINGER
47
28
BLAUPUNKT
39
57
SINUDYNE
47
29
SIEMENS
39
MISCELLANEOUS
5
Point the remote control toward the TV and
press POWER. If the TV turns off or on, the
setting is complete.
TV Brand Code List
• You can use the TV POWER,TV VIDEO, VOLUME, CHANNEL,
and Numeric buttons (0~9).
Note
• The remote control may not work on some brands of TVs. Also some operations may not be
67
possible depending on your brand of TV.
• If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
68
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
Symptom
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
player.
Sound is not produced.
• Are you using a deformed disc or a disc with scratches on
•
•
Dolby Digital 5.1 CH
Surround Sound is not
produced.
69
motion playback.
Are the speakers connected properly? Is the speaker setup
correctly customized?
Is the disc severely damaged?
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
•
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
• Is the remote control being operated within its operation range of
The remote control does not angle and distance?
• Are the batteries exhausted?
work.
Have you select the mode(TV/DVD) functions of the remote
•
control (TV or DVD) correctly?
Audio language and
subtitles do not work.
Menu screen does not appear even
when the menu function is selected.
• Audio language and subtitles will not work for DVDs not containing
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
them. And depending on the disc, they may work differently.
• Are you using a disc that does not contain menus?
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
antenna in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
70
MISCELLANEOUS
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
the surface?
Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
•
Sound can be heard only
from a few speakers and
not all six.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
Check/Remedy
Cautions on Handling and Storing Discs
Specifications
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
G
E
N
E
R
A
L
T
F U
N
M E
R
T
U
AM N
E
R
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Keep in a clean
Protection jacket.
Store vertically.
Power Consumption
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Usable Sensitivity
S/N Ratio
Distortion
100W
4.5Kg
430 x 75 x 368 mm
+5°C~+35°C
10%~75%
10dB
55dB
0.8%
60dB
35dB
2%
VIDEO INPUT Composite Video
1.0Vp-p(75Ω load)
Composite Video
1.0Vp-p(75Ω load)
V
I
D
E
O
O
U
T
P
U
T
Y:1.0Vp-p(75Ω load)
Component Video
Pr:0.7Vp-p(75Ω load)
Pb:0.7Vp-p(75Ω load)
S-Video
Luminance signal : 1.0Vp-p(75Ω load)
Color Signal : 0.286Vp-p(75Ω load)
Caution
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
A
M
P
L
I
F
I
E
R
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
100W x 2(4Ω)
100W(4Ω)
100W x 2(4Ω)
100W(4Ω)
20Hz~20kHz
70dB
60dB
(AUX)400mV
MISCELLANEOUS
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
71
72
Notes on Terminology
HT-DS700
5.1ch speaker system
Speaker system
S
P
E
A
K
E
R
Front/Center/Rear speaker
Subwoofer speaker
Impedance
4Ω x 5
4Ω
Frequency range
150Hz~20KHz
30Hz~150Hz
Output sound pressure level
85dB/W/M
86dB/W/M
Rated input
Maximum input
Dimensions (W x H x D)
100W
100W
200W
200W
Front/Rear
91 x 135 x 99 mm
Center
200 x 107 x 100 mm
Front/Rear
0.9 kg
Center
1.0kg
Weights
180 x 409 x 380 mm
5.1ch speaker system
S
P
E
A
K
E
R
Front/Center/Rear speaker
Subwoofer speaker
Impedance
4Ω x 5
4Ω
Frequency range
150Hz~20KHz
30Hz~150Hz
Output sound pressure level
85dB/W/M
86dB/W/M
Rated input
100W
100W
Maximum input
200W
200W
Front/Rear
85 x 1150 x 99 mm
Center
225 x 85 x 99 mm
Front/Rear
4.4 kg
Center
1.6 kg
Weights
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound have been recorded by
means of digital signals. Incorporating a new video compression technology (MPEG-2) and highdensity recording technology, a DVD disc comprises two 0.6 mm thick discs bonded together.
PCM
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
180 x 409 x 380 mm
7.0 Kg
TRACK NUMBER
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
A 4 channel analog sound reproduced from a program source such as a
videotape or LD with the
mark. You can enjoy a more realistic, robust
sound unavailable from regular stereo sources.
73
74
MISCELLANEOUS
Dimensions (W x H x D)
CHAPTER
NUMBER
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number
of different angles (the same scene is shot from the front, from the left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for specific scenes.
7.0 Kg
HT-DS900
Speaker system
ANGLE
Download PDF