Samsung | HT-TX500 | Samsung HT-TX500 User Manual

HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 2
Instruction Manual
GB
DIGITAL HOME
CINEMA SYSTEM
HT-TX500
AH68-01660E
AH68-02013B
REV: 01
COMPACT
DIGITAL AUDIO
HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 2
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
GB
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock
or personal injury.
This symbol indicates important instructions
accompanying the product.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). Make sure the ventilation slots are
not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot.
Before moving the player, ensure the Disc Insert Hole is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove
the main plug from the wall outlet, especially when left unused for a long period of time.
PREPARATION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER (or BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Precautions
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
CAUTION
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and shall stay readily operable at any time.
Wiring the Main Power Supply Plug (UK Only)
During thunderstorms, disconnect the AC main plug from
the wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug
and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse
fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain
a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to
a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
Phones
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:– BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
2
This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
Protect the player from moisture (i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC
supply if the player malfunctions. Your player is not intended for
industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc has been stored
in cold temperatures.
If transporting the player during the winter, wait approximately 2
hours until the unit has reached room temperature before using.
The batteries used with this product contain chemicals that are
harmful to the environment.
Do not dispose of batteries in the general household trash.
3
HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 4
Features
Contents
GB
PREPARATION
SETUP
The HT-TX500 combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO, CD,
MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD R/RW, with a sophisticated FM tuner, all in a single player.
Safety Warnings ............................................................2
DVD-Audio compatible
Features.........................................................................4
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range,
low-level resolution and high-frequency detail.
Notes on Discs ..............................................................6
Settings........................................................................46
Setting the Language.............................................46
Setting TV Screen type..........................................47
Setting Parental Controls (Rating Level) ...............48
Setting the Password.............................................48
Setting the Wallpaper.............................................49
To Select One of the 3 Wallpaper Settings
you've made...........................................................49
DVD Playback Mode ............................................50
DivX (R) registration...............................................50
Setting the Speaker Mode .....................................50
Setting the Delay Time...........................................51
Setting the Test Tone .............................................52
Setting the Audio....................................................53
Precautions....................................................................3
Description.....................................................................8
USB Host support
You can connect and play files from external USB storage devices such as MP3 players, USB flash memory, etc. using
the Home Theater's USB HOST function.
Dolby Pro Logic II
Dolby Pro Logic II is a form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro
Logic.
CONNECTIONS
Speaker Installation .....................................................12
Installing the DVD player.............................................14
Connecting the Speaker ..............................................16
Connecting the Optional Wireless Receiving Amplifier.........19
Connecting the Video Out to your TV .........................21
DTS (Digital Theater Systems)
HDMI Function.............................................................22
DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency
5.1 channel sound.
Connecting Audio from External Components ............23
Connecting the FM Antenna........................................26
PREPARATION
Multi-Disc Playback & FM Tuner
Setting the DRC (Dynamic Range Compression)......54
Setting the AV SYNC .............................................54
Setting the HDMI Audio .........................................55
Sound Field (DSP)/EQ Function ............................56
Dolby Pro Logic II Mode ........................................57
Dolby Pro Logic II Effect ........................................58
TV Screen Saver Function
If the main unit remains in Stop mode for 3 minutes, the Samsung logo appears on TV screen.
The HT-TX500 automatically switches itself into the power saving mode after 20 minutes in the Screen Saver mode.
Power Saving Function
The HT-TX500 automatically shuts itself off after 20 minutes in Stop mode.
Customized TV Screen Display
The HT-TX500 allows you to select your favorite image during JPEG or DVD playback and set it as your background wallpaper.
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture.
The 1080p(Full HD) resolution provides even clearer pictures.
Anynet+(HDMI-CEC) Function
Anynet+ is a function that can be used to operate the main unit using a Samsung TV remote control, by connecting the
Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support
Anynet+.)
Simple Touch Button
The touch button on this player has equipped with a sensor activated by a physical contact, which allows you to operate
the button with simple touch.
4
OPERATION
MISCELLANEOUS
Before Reading the User's Manual .............................27
Before Using Your Home Theater ...............................28
Disc Playback ..............................................................29
MP3/WMA-CD Playback .............................................30
JPEG File Playback.....................................................31
DivX Playback....................................... ......................32
Using the Playback Function.......................................34
Displaying Disc Information ....................................34
Checking the Remaining Time................................35
Fast Playback .........................................................35
Slow Playback ........................................................35
Skipping Scenes/Songs..........................................36
Repeat Playback.....................................................37
To Select a Repeat Playback Mode in the Disc
Information Screen .................................................37
A-B Repeat Playback .............................................38
Step Function..........................................................38
Angle Function........................................................39
Zoom (Screen Enlarge) Function ...........................39
EZ VIEW Function ..................................................40
Bonus Group...........................................................40
Navigating Pages....................................................40
Audio Language Selection Function.......................41
Subtitle Language Selection Function....................41
Moving Directly to a Scene/Song ...........................42
Using the Disc Menu...............................................43
Using the Title Menu...............................................43
Playing Media Files using the USB Host feature ........44
Listening to Radio........................................................59
About RDS broadcastig ...............................................61
Convenient Functions..................................................63
Operating a TV with the Remote Control ..................64
Troubleshooting .........................................................66
Cautions on Handling and Storing Discs ..................68
Language Code List ..................................................69
USB Host Feature Supported Products ....................70
Specifications ............................................................71
5
HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 6
Notes on Discs
GB
1
~ 6
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Disc Recording Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
the disc.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minute as they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not
Playable Discs
Disc Type
Mark (Logo)
be able to fully play the disc.
Recorded Signals
Disc Size
12cm
DVD-AUDIO
DVD-VIDEO
Audio + Video
8cm
COMPACT
Audio
AUDIO-CD
DIGITAL AUDIO
Divx
Audio + Video
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the "mp3" and extensions can be played.
• Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc,
•
•
•
•
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a <CAN'T PLAY THIS DISC PLEASE,CHECK REGION CODE> message
appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
•
6
PREPARATION
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
the disc can be played only up to the blank segment.
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
A maximum of 500 tracks can be played per CD.
A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
DVD R/RW, CD-R/RW DivX Discs
• Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user
might not play.
• Software updates for incompatible formats are not supported.
(Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.)
• Sections with a high frame rate might not be played while playing a DivX file.
• For more information about the formats authorized by DivX Networks, Inc., please visit "www.divxnetworks.net".
7
HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 8
Description
GB
Front Panel
Side Panel
2
3
5
4
6
7
PREPARATION
1
8
9
10
1. Power (
) button
(Press and hold for more than 1 second)
2. Function button
3. Tuning Down & Skip (
4. Stop (
1. AUX IN 1 Jack
1
2
) button
3. TX Card Connection(WIRELESS)
) button
3
7. Volume Control button
8. Eject button
(Press and hold for more than 1 second)
9. Disc Insert Hole
) button
5. Play/Pause (
6. Tuning Up & Skip (
2. USB Port
) button
10. Display
Rear Panel
Accessories
1
2
3
4
9
5
6
7
8
10
1. FM 75Ω COAXIAL Jack
2. HDMI OUT Jack
3. Component Video Output Jacks
Connect a TV with Component video inputs to
these jacks.
4. Video Output Jack
Connect your TV's Video Input jack (VIDEO IN) to
the VIDEO OUT Jack on this unit.
5. AUX IN 2 Jacks (L/R)
6. Audio Output Jack
7. External Digital Optical Input Jack 1
Use this to connect external equipment capable of
digital output.
8. External Digital Optical Input Jack 2
Use this to connect external equipment capable of
digital output.
9. Stand Fix Hole
10. Cooling Fan
Remote Control
System Cable
Video Cable
Screw(Large) : 3EA
Screw(Small) : 4EA
FM Antenna
Core
(Toroidal Ferrite Core)
HDMI Cable
Stand base
User's Manual
Stand
• For more information about the speaker system, refer to page 12.
8
9
HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 10
Description (Con’t)
GB
Remote Control
2
3
4
19
20
21
22
5
6
7
23
24
8
25
9
26
27
10
28
29
11
12
13
30
31
32
33
14
34
15
35
16
10
36
17
37
18
38
1. DVD RECEIVER button
2. TV button
3. TV/VIDEO button
4. POWER button
5. Number (0~9) buttons
6. REMAIN button
7. STEP button
8. Tuning Preset/CD Skip buttons
9. VOLUME button
10. MENU button
11. AUDIO button
12.
PL II EFFECT button
13.
PL II MODE button
14. TUNER MEMORY, SD(Standard
Definition)/HD(High Definition) button
15. ZOOM button
16. SLEEP button
17. SLOW, MO/ST button
18. EZ VIEW, NT/PAL button
19.
DVD button
TUNER button
1
2
3
Remove the battery cover in the direction of the arrow.
Insert two 1.5V AAA batteries, paying attention to the correct polarities
(+ and –).
Replace the battery cover.
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
• Use the correct type of batteries. Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose the batteries to heat or a flame.
PREPARATION
1
Insert Remote Batteries
Operation Range of the Remote Control
The remote control can be used up to approximately 7 meters in a straight line. It can also be operated
at a horizontal angle of up to 30° from the remote control sensor.
USB, AUX button
20. EJECT button
21. DIMMER button/ BUZZER OFF button
/ HOLD button
22. RDS selection button
23. CANCEL button
24. REPEAT button
25.
PLAY/PAUSE button
STOP button
SEARCH buttons
26. TUNING/CH button
27. MUTE button
28. RETURN button
29. Cursor/ENTER button
30. SUBTITLE button
31. EXIT button
32. DSP/EQ button
33. INFO button
34. SOUND EDIT button
35. DIGEST button
36. TEST TONE button
37. SLIDE MODE button
38. LOGO button
11
HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 12
Speaker Installation
GB
How to Install the Speaker and the Stand
1
1
STAND
BASE
Turn the stand upside down and mount it on the stand
base.
4
4
Mount the speaker on the stand.
SPEAKER
STAND
STAND
2
Tighten 4(Black) screws on the bottom side of the stand base.
5
5
Tighten 2(Silver) screws on the back of the speaker.
3
3
Place the stand on the floor and tighten 2(Silver) on the back of
the stand.
6
6
This is the successfully assembled speaker.
CONNECTIONS
2
Speaker Packages
Please confirm that all the following contents are included in the package.
• Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.
Front/Rear Speaker
Center Speaker
SPEAKER
(4EA)
STAND
(4EA)
STAND BASE
(4EA)
Screw (16EA) : BLACK
Screw (16EA) : SILVER
Subwoofer Speaker
Speaker Cable (5EA)
Front speakers and rear speakers are packaged
separately as shown in the diagram.
12
13
HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 14
Installing the DVD player
5
STAND
1
1
STAND BASE
Mount the stand on the stand base and tighten 4
screws on the bottom side of the stand base.
Open the holder cover of the round board on the
bottom of the stand and pass the cables through the
holder.
6
Squeeze the cables into the groove on the holder of
the round board.
STAND
Secure the main unit by aligning 2 protruding points
on the back of the main unit with the fixing holes
on the stand.
Round Table
Holder
7
Close the holder cover.
8
Open a Toroidal Ferrite Core by pulling it upward.
Wrap it around of the system connection cable so it
will be next to the DVD Player. Close it back by
pressing it all the way down until you hear a clicking
sound.
CONNECTIONS
2
4
5
6
2
3
GB
7
3
4
Tighten 3 screws in the middle of the stand.
Push the cable into the cable fixing hole in the stand.
8
• For the stand packages, refer to page 9.
• The Toroidal Ferrite Core is designed to reduce electromagnetic waves that may cause interference.
14
15
HT-TX500_GB-(1~45)-1009
10/19/07 3:09 PM
Page 16
Connecting the Speakers
GB
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Rear of Subwoofer
POWER
ON
L
Rear of Main unit
AUDIO IN
C
SW
AUDIO IN
CROSS OVER
OFF
R
Center Speaker
SL
Front Speaker (L)
SR
Rear Speaker (R)
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under the TV stand.
Front Speakers L R
• Place these speakers in front of your listening position, facing
•
•
inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same
height as your ear.
Align the front face of the front speakers with the front face of
the center speaker or place them slightly in front of the center
speakers.
The listening position should be located about 2.5 to 3 times the
distance of the TV's screen size away from the TV. Example :
For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Rear Speakers SL SR
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers so they face
1
2
Black
Red
1
2
Press down the terminal tab on the back of the speaker.
3
Connect the connecting plugs to the back of the Subwoofer.
Insert the black wire into the black terminal (–) and the red
wire into the red (+) terminal, and then release the tab.
Make sure the colors of the speaker terminals match the colors of the
connecting plugs.
each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear,
facing slightly downward.
come from them all the time.
Sound will be heard from the rear speakers in
* DVD
5.1-CH or Dolby Pro Logic II mode only.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
16
Rear Speaker (L)
Connecting the Speakers
Selecting the Listening Position
Unlike the front and center speakers, the rear speakers are
* used
to handle mainly sound effects and sound will not
Center Speaker C
• It is best to install it at the same height as the front speakers.
• You can also install it directly over or under the TV.
CONNECTIONS
Front Speaker (R)
• Do not let children play with or near the speakers. They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
• Keep the speaker out of reach of children so as to prevent children from inserting their hands or alien substances
into the duct (hole) of the subwoofer speaker.
• Do not hang the subwoofer on the wall through the duct (hole).
• If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated
by the speaker. If this occurs, place the speaker away from your TV set.
17
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 18
Connecting the Speakers (Con’t)
Connecting the Optional Wireless Receiving Amplifier
GB
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
Connecting the Main Unit and Subwoofer
When you have Purchased the Wireless Receiving Module (SWA-3000)
Rear of
Subwoofer
Center Speaker
POWER
ON
AUDIO IN
CROSS OVER
OFF
Front Speaker (R)
Front Speaker (L)
CONNECTIONS
AUDIO IN
POWER
ON
AUDIO IN
Rear Speaker (R)
Rear Speaker (L)
CROSS OVER
OFF
Rear of Subwoofer
Rear of Main unit
Use the system cable to connect the AUDIO OUT port of the main unit to the AUDIO IN port
of the subwoofer.
WIRELESS RECEIVER MODULE
1
Connect the front and center speakers to the Subwoofer, referring to
pages 16~18.
2
With the DVD Player turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the side of the main unit.
Subwoofer Functions
Subwoofer: With the built-in, dedicated 165W amplifier, the subwoofer generates rich bass sounds.
Crossover: The Crossover sets the cutoff frequency for the subwoofer. Set the Crossover control
for the best bass response in your room.
Hold the TX card so that the slanted side faces upward and insert the
card into the port.
Slanted side face up
The TX card enables communication between the subwoofer and the wireless receiver.
3
Connect the left and right rear speakers to the wireless receiving
module.
4
Plug the power cord of the wireless receiving module in the wall outlet
and switch the power switch <ON>.
TX card
POWER
ON
18
OFF
AUDIO IN
CROSS OVER
1
2
3
4
1 Power button
2 External Audio Input Connector
3 Crossover Controller
4 Speaker Output Terminals
• Do not insert a card other than the TX card dedicated for the product.
The product might be damaged or the card may not be removed easily.
• Do not insert the TX card upside down or in the reverse direction.
• Insert the TX card when the DVD Player is turned off.
Inserting the card when it is turned on may cause a problem.
• If the TX Card is inserted, sound is not output from the Rear Speaker
connectors on the subwoofer.
19
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 20
Connecting the Optional Wireless Receiving Amplifier (Con’t)
Resetting the Wireless Receiving Module
Connecting the Video Out to your TV
GB
Choose one of the three methods for connecting to a TV.
Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does not
light up and the "REAR CHECK" message blinks on the main unit's display.
Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode.
1
With the main unit turned off, press and hold the remote
control's REMAIN button for 5 seconds.
■
METHOD 1
(supplied)
The STANDBY LED on the front panel of the wireless receiver module
2
METHOD 2
With the wireless receiver module turned on, use a ball point
pen or a toothpick to press the RESET button on the back of
the unit.
■
CONNECTIONS
blinks.
METHOD 3
(supplied)
The STANDBY LED on the front panel of the wireless receiver module
blinks 2 Times.
3
Press and hold the Power button on the home theater system
for more than 1 second to turn it on.
■
The LINK LED of the wireless receiver module is lit and the Reset is
completed.
■
If Power Standby mode continues, repeat Steps 1 to 3 above.
METHOD 1 : HDMI ....... (Best Quality)
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.
• When the wireless receiving module setting is complete, no audio signal is output from the Rear Speaker Output
Connector on the back of the subwoofer.
• The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and
moisture.
• For optimal listening performance, make sure that the area around the wireless receiver module location is clear of
any obstructions.
• Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode only.
• In 2-CH mode, no sound will be heard from the wireless rear speakers.
METHOD 2 : Component Video .... (Better Quality)
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) Jacks on the back of the DVD Player to the Component Video Input
Jacks on your TV.
METHOD 3 : Composite Video ....... (Good Quality)
• Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close
to the main unit, some sound interruption may be heard due to interference.
• If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that
uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.
• The transmission distance of a radio wave is about 10m, but may vary depending on your operating environment.
If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may
not operate at all, because the radio wave cannot penetrate metal.
20
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack
on your TV.
• This product operates in Interlace scan mode (576i, 480i) for component output.
• After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
• If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate
the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs that
support Anynet+(HDMI-CEC).
logo. If your TV has an
logo, then it supports the Anynet+ function.
• Please check the
21
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 22
HDMI Function
Connecting Audio from External Components
GB
Resolution Selection
This function allows the user to select the screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Definition/High Definition)
button on the remote control.
■
Resolutions available for the HDMI output are 576p(480p), 720p, 1080i and 1080p.
■
SD(Standard Definition) resolution is 576p(480p) and HD(High Definition) resolution is 720p/1080i/1080p.
AUX1 : Side Panel
Why use HDMI (High Definition
Multimedia Interface)?
This device transmits a DVD
video signal digitally without
the process of converting to
analog. You will get sharper
digital pictures when using an
HDMI connection.
CONNECTIONS
• If the TV does not support the configured resolution, you will not be able to see the
picture properly.
• When an HDMI cable is connected, composite and component video signals
are not output.
• See your TV owner's manual for more information on how to select the TV's Video
Input source.
Audio Cable
(not supplied)
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by
connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support Anynet+.)
With Anynet+
You can operate this unit,
power on your TV, or watch a
movie by pressing the Play
button on your Samsung TV's
remote control.
1
Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable.
(See page 21)
2
Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
■
You can operate the Home Theater by using the TV remote control.
(Available TV buttons :
,
,
,
, , and , buttons,
~
button)
AUX1 : Connecting an External Component/MP3 player
If you select TV
Set the Anynet+(HDMI-CEC) function to <On> on your TV.
■
■
MOVE
ENTER
EXIT
<Receiver : On> : You can listen to audio through the Home Theater.
<Receiver : Off> : You can listen to audio through the TV.
If you select the THEATER
Select <THEATER to connector> and set the option of each items below.
■
■
■
■
■
MOVE
ENTER
<View TV> : If Anynet+ (HDMI-CEC) is on and you select View TV, the Home Theater
will automatically switch to DIGITAL IN.
<THEATER Menu> : You can access the Home Theater menu.
<THEATER Operation> : The Home Theater disc playback information will be displayed.
<Receiver : On> : You can listen to audio through the Home Theater.
<Receiver : Off> : You can listen to audio through the TV.
Components such as an MP3 Player
1
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player.
2
Press the AUX button on the remote control to select <AUX1> input.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN 1 ➝ D.IN 2 ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
EXIT
• If you want to listen to TV sound through the home theater system, connect the
optical cable to the OPTICAL 1 port of the system.
• If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off.
• Anynet+ (HDMI-CEC) will only work while in the DVD mode.
22
23
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 24
Connecting Audio from External Components (Con’t)
GB
AUX2 : Rear Panel
OPTICAL : Rear Panel
CONNECTIONS
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect
either left or right.
Optical Cable
(not supplied)
AUX2 : Connecting an External Analog Component
OPTICAL : Connecting an External Digital Component
Analog signal components such as a VCR.
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1
1
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
■
2
Be sure to match connector colors.
Press the AUX button on the remote control to select <AUX2> input.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN 1 ➝ D.IN 2 ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
2
Connect the Digital Input (OPTICAL 1 or 2) on the Home Theater to the Digital Output of the external digital
component.
Press the AUX button on the remote control to select <D.IN 1>,<D.IN 2>.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN 1 ➝ D.IN 2 ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
24
25
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 26
Connecting the FM Antenna
Before Reading the User's Manual
GB
Make sure to check the following terms before reading the user manual.
FM Antenna (supplied)
Icons that will be used in manual
Icon
DVD
CD
MP3
JPEG
DVD
CD
This involves a function available with DVD or
DVD-R/DVD-RW discs that have been recorded and
finalized in Video Mode.
This involves a function available with a data CD
(CD-R or CD-RW).
MP3
This involves a function available with CD-R/-RW discs.
JPEG
This involves a function available with CD-R/-RW discs.
DivX
This involves a function available with MPEG4 discs.
(DVD R/RW, CD-R or CD-RW)
CAUTION
NOTE
1
2
Definition
OPERATION
DivX
Term
This involves a case where a function does not
operate or settings may be cancelled.
This involves tips or instructions on the page that
help each function operate.
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
• In this manual, the instructions marked with "DVD ( DVD )" are applicable to DVD-VIDEO, DVD-AUDIO
and DVD-R/-RW discs that have been recorded in Video Mode and then finalized.
Where a particular DVD type is mentioned, it is indicated separately.
• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
• Depending on the content of the disc, the initial screen may appear different.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
26
■
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
■
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.)
27
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 28
Before Using Your Home Theater
Disc Playback
DVD
CD
GB
To Operate your Samsung TV and the Home Theater with the HT-TX500's Remote Control
The DVD Home Theater's remote can be used to control Samsung TVs.
1
1
Plug the main unit's power cord into the AC power supply.
■
Before plugging your system into a main socket, you must check the voltage setting.
If the voltage of the socket does not correspond to the setting on the rear of the unit,
you may seriously damage your system.
2
Press the TV button to set the remote to TV mode.
3
Press the POWER button to turn on your Samsung TV
with this remote.
4
Press the TV/VIDEO button to select VIDEO mode on your TV.
2
Load a disc vertically into the Disc Insert Hole.
■
Insert a disc so that the label side faces forward.
■
Playback starts automatically.
Press the EJECT button on the remote control or press and hold the
EJECT button for more than 1 second on the main unit.
EJECT button
■
The disc will be ejected from the disc insert hole of the main unit.
VIDEO
OPERATION
5
6
Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
To stop playback, press the STOP ( ) button during playback.
■
Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD playback.
■
• If you want to turn on or off the main unit, press and hold the Power button on the remote control or on the
main unit for more than 1 second.
If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE (
) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the PLAY/PAUSE (
■
To resume playback, press the PLAY/PAUSE (
) button during playback.
) button again.
Selecting the Video Format
Press and hold the NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
■
■
■
■
28
• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection
system) recommendations.
By default, the video format is set to <PAL>.
<NTSC> or <PAL> will appear in the display. At this time, press the NT/PAL button shortly to select
between <NTSC> and <PAL>.
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format of your TV.
29
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 30
MP3/WMA-CD Playback
JPEG File Playback
MP3
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
1
2
The MP3/WMA menu screen will appear and playback will start.
The appearance of the menu depends on the MP3/WMA disc.
■
WMA-DRM files cannot be played.
In Stop mode, use the Cursor ,
and then press the ENTER button.
Use the Cursor
,
,
,
1
Load the JPEG disc.
■
2
button to select the album,
Playback starts automatically. Each image is displayed for 5 seconds and then the next
imageis displayed.
Press the SLIDE MODE button.
■
Each time the button is pressed, the image makes the transition as follows:
SLIDE SHOW MODE : 1~5 ➝ SLIDE SHOW MODE : RANDOM ➝ SLIDE SHOW MODE : NONE
button to select the track.
To change the album, use the Cursor , , , button to select another
album in Stop mode, and then press the ENTER button.
■
4
Slide Mode
■
■
3
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played
back with this Home Theater.
Load the MP3/WMA disc.
■
GB
JPEG
To select another album and track, repeat Steps 2 and 3 above.
Press the STOP ( ) button to stop playback.
Press the
■
button to skip to the next slide.
Each time the button is pressed, the slide moves backward or forward.
Digest Function
You can view 9 JPEG images on the TV screen at once.
1
Press the DIGEST button during playback.
• Depending on the recording mode, some MP3/WMA-CDs may not play.
• Table of contents of a MP3/WMA-CD varies depending on the MP3/WMA track
format recorded on the disc.
2
JPEG files will be shown in 9 windows.
Press the Cursor , , , button to select the desired image and
then press the ENTER button.
■
The selected image is played for 5 seconds before moving to the next image.
To view the previous or next 9 images, press the
OPERATION
■
button.
To play a file icon in the screen,
Press the Cursor
,
,
,
button when it is in Stop mode and select a desired icon from the top part of the menu.
Music File Icon : To play music files only, select the
Icon.
Image File Icon : To view image files only, select the
Icon.
Movie File Icon : To view movie files only, select the
Icon.
All File Icon : To view movie files only, select the
Rotate/Flip Function
Icon.
Press the Cursor
during playback.
,
,
,
button
button: Flip Vertically
button: Rotate 90°
Counterclockwise
button: Rotate 90°
Clockwise
Original Image
button: Flip Horizontally
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
30
31
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
DivX Playback
Page 32
GB
DivX
The functions on this page apply to DivX disc playback.
Skip Forward/Back
During playback, press the
If the Disc has more than One Subtitle File
,
button.
■
Goes to the next file whenever you press the
■
Goes to the previous file whenever you press the
If the disc has more than one subtitle file, the default subtitle may not match the
movie and you will have to select your subtitle language as follows:
button, if there are over 2 files in the disc.
button, if there are over 2 files in the disc.
Fast Playback
To play back the disc at a faster speed, press the
■
or
1
In Stop mode, press the Cursor ,
button, select the desired subtitle (
from the TV screen, and then press the ENTER button.
2
When you select the desired DivX file from the TV screen, the movie will be
played normally.
)
button during playback.
Each time you press either button, the playback speed will change as follows:
DivX(Digital internet video eXpress)
2x ➝ 4x ➝ 8x ➝ 32x ➝ Normal.
5 Minute Skip function
During playback, press the Cursor
,
button.
■
Playback skips 5 minutes forward whenever you press the Cursor
■
Playback skips 5 minutes back whenever you press the Cursor
1. Supported Formats
This product only supports the following media formats. If both video and audio formats are not supported, the user may
experience problems such as broken images or no sound.
button.
button.
Supported Video Formats
Format
Supported Versions
Audio Display
If there are multiple audio tracks on a disc, you can toggle between them.
■
Each time you press the button, your selection will toggle between <AUDIO (1/N, 2/N ...)> and
•
is displayed when there is one supported language in the disc.
WMV
V1/V2/V3/V7
Supported Audio Formats
Press the AUDIO button.
■
AVI
DivX3.11~DivX5.1, XviD
OPERATION
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and
video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality
video and audio.
.
Format
Bit Rate
Sampling Frequency
MP3
WMA
80~384kbps
56~128kbps
44.1khz
AC3
128~384kbps
44.1/48khz
DTS
1.5Mbps
44.1khz
• DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.
• Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels
(16:9). TV screen resolutions higher than 800 will not be supported.
Subtitle Display
• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on
the screen during playback.
2. Caption Function
Press the SUBTITLE button.
■
Each time you press the button, your selection will toggle between <SUBTITLE (1/N, 2/N ...)>
and <SUBTITLE OFF>.
32
■
If the disc has only one subtitle file, it will be played automatically.
■
See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX
discs.
• You must have some experience with video extraction and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi)
within the same folder.
Example. Root Samsung_007CD1.avi
Samsung_007CD1.smi
• Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the
file name.
33
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 34
Using the Playback Function
Displaying Disc Information
DVD
CD
MP3
JPEG
GB
Checking the Remaining Time
DivX
You can view disc playback information on the TV screen.
CD
MP3
Press the REMAIN button.
■
Press the INFO button.
■
DVD
For checking the total and remaining time of a title or chapter being played.
Each time the Remain button is pressed
Each time the button is pressed, the display changes as follows:
TITLE ELAPSED ➝ TITLE REMAIN ➝ CHAPTER ELAPSED ➝ CHAPTER REMAIN
DVD-VIDEO
DVD
GROUP ELAPSED ➝ GROUP REMAIN ➝ TRACK ELAPSED ➝ TRACK REMAIN
DVD-AUDIO
The information
Display disappears
from the screen
TRACK ELAPSED ➝ TRACK REMAIN ➝ TOTAL ELAPSED ➝ TOTAL REMAIN
CD
TRACK REMAIN ➝ TRACK ELAPSED
MP3
CD
DVD
JPEG
MP3
Press the
■
MP3
CD
DivX
,
button.
Each time the button is pressed during playback, the playback speed changes as follows:
DivX
The information
Display disappears
from the screen
2X ➝
4X ➝
8X ➝
32X ➝
PLAY
2X ➝
4X ➝
8X ➝
32X ➝
PLAY
OPERATION
Fast Playback
The information
Display disappears
from the screen
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
• Depending on the disc, the disc information display may appear different.
• Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC.
Slow Playback
appears on the TV screen!
If this symbol appears on the TV screen when pressing a button, that operation is not
possible with the disc currently being played.
Screen Display
DVD display
DVD DVD-AUDIO display
AUDIO
CD display
34
DVD
Press the SLOW button.
■
Each time the button is pressed during playback, the playback speed changes as follows:
DVD
TITLE display
ELAPSED TIME display
STEREO (L/R) display
CHAPTER display
REPEAT PLAYBACK display
DOLBY DIGITAL display
TRACK (FILE) display
AUDIO LANGUAGE display
ANGLE display
GROUP display
SUBTITLE display
DivX
1/2 ➝
1/4 ➝
1/8 ➝
1/2 ➝
1/2 ➝
1/4 ➝
1/8 ➝
PLAY
1/4 ➝
1/8 ➝
PLAY
DivX
• No sound is heard during slow playback.
• Reverse slow playback does not work with DivX.
35
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 36
Using the Playback Function (Con’t)
Skipping Scenes/Songs
Press the
■
■
DVD
,
GB
Repeat Playback
MP3
DVD
CD
MP3
JPEG
DivX
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
button.
Each time the button is pressed during playback, the previous or next chapter, track or
directory (file) will be played.
You cannot skip chapters consecutively.
Press the REPEAT button.
Each time the button is pressed during playback, the repeat playback mode
changes as follows:
REPEAT : CHAPTER ➝ REPEAT : TITLE ➝ REPEAT : OFF
DVD
DVD-VIDEO
TITLE 01/05 CHAPTER 002/045
REPEAT : TRACK ➝ REPEAT : GROUP ➝ REPEAT : OFF
TITLE 01/05 CHAPTER 004/045
DVD-AUDIO
REPEAT : TRACK ➝ REPEAT : DISC ➝ REPEAT : OFF
CD
REPEAT : RANDOM ➝ REPEAT : TRACK ➝ REPEAT : DIR ➝
MP3
JPEG
DivX
REPEAT : DISC ➝ REPEAT : OFF
OPERATION
Repeat Playback Options
MP3
CHAPTER : Repeatedly plays the selected chapter.
TRACK : Repeatedly plays the selected track.
TITLE : Repeatedly plays the selected title.
DIR : Repeatedly plays all tracks in the selected folder.
GROUP : Repeatedly plays the selected group.
DISC : Repeatedly plays the entire disc.
RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
OFF : Cancels Repeat Playback.
To Select a Repeat Playback Mode in the Disc Information Screen
1
2
3
DVD
CD
Press the INFO button twice.
Press the Cursor
button to move to REPEAT PLAYBACK (
) display.
Press the Cursor
button to select the desired Repeat Playback mode.
To select another album and track, repeat Steps 2 and 3 above.
4
Press the ENTER button.
DVD
CD
• For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information
display screen.
36
37
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 38
Using the Playback Function (Con’t)
A-B Repeat Playback
GB
Angle Function
DVD
You can repeatedly play back a designated section of a DVD.
1
2
3
1
2
3
button to move to the REPEAT PLAYBACK (
) display.
Press the Cursor , button to select <A-> and then press the ENTER
button at the beginning of the desired segment.
■
4
This function allows you to view the same scene in different angles.
Press the INFO button twice.
Press the Cursor
DVD
Press the INFO button.
Press the Cursor
button to move to ANGLE (
Press the Cursor
,
■
) display.
or numeric buttons to select the desired angle.
Each time the button is pressed, the angle changes as follows:
When the ENTER button is pressed, the selected position will be stored in memory.
1/3
Press the ENTER button at the end of the desired segment.
■
2/3
The specified segment will be played repeatedly.
3/3
A-B
REPEAT A-B
,
• The Angle function works only with discs on which multiple angles have been recorded.
button to select
• The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
• Point B cannot be set until 5 seconds of playback has elapsed from point A.
Zoom (Screen Enlarge) Function
OPERATION
To return to normal playback, press the Cursor
OFF.
DVD
This function allows you to enlarge a particular area of the displayed image.
1
2
Step Function
DVD
Press the Cursor
enlarge.
,
,
,
button to move to the area you want to
DivX
3
Press the ENTER button.
■
Press the STEP button.
■
Press the ZOOM button.
Each time the button is pressed, the zoom level changes as follows:
The picture moves forward one frame each time the button is pressed during playback.
ZOOM X 1.5 ➝ ZOOM X 2 ➝ ZOOM X 3 ➝ ZOOM OFF
SELECT ZOOM POSITION
• No sound is heard during step motion playback.
• This feature is not supported for DivX discs.
38
39
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 40
Using the Playback Function (Con’t)
EZ VIEW Function
GB
Audio Language Selection Function
DVD
Press the EZ VIEW button.
Each time the button is pressed, the zoom function will switch between On and Off.
When a movie is played in Widescreen format, black bars at the top and bottom of the TV
screen can be removed by pressing the EZ VIEW button.
1
2
Press the INFO button twice.
Press the Cursor
language.
■
EZ VIEW
EZ VIEW OFF
DVD
,
button or numeric buttons to select the desired audio
Depending on the number of languages on a DVD disc, a different audio language (ENGLISH,
SPANISH, FRENCH, etc.) is selected each time the button is pressed.
SP 2/3
FR 3/3
Bonus Group
Subtitle Language Selection Function
1
2
3
DVD
Press the INFO button twice.
Press the Cursor
button to move to SUBTITLE (
) display.
Press the Cursor
button or numeric buttons to select the desired subtitle.
OPERATION
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to
vertical ratio.
• This feature is not supported for DivX discs.
• During the EZ View operation, some of the left and right sides may be cut slightly.
DVD-AUDIO
EN 1/3
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging
for details and the key number.
EN 01/ 03
OFF
SP 02/ 03
FR 03/ 03
When you play a DVD-Audio disc that has a bonus group, the key number
input screen appears automatically.
OFF / 03
BONUS GROUP
KEY NUMBER :
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
Navigating Pages
DVD-AUDIO
During playback, press the
■
■
40
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on the
remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
,
button on the remote control.
You can select the desired image from a DVD-Audio disc containing still images.
With some discs, you may not be able to select images.
41
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 42
Using the Playback Function (Con’t)
Moving Directly to a Scene/Song
DVD
1
2
DVD
5
6
MP3
Using the Disc Menu
JPEG
1
2
Press the INFO button.
Press the Cursor
Press the Cursor
,
button or numeric buttons to select the
) and then press the ENTER button.
,
button to move to the Chapter (
Press the Cursor
,
button to move to time (
In Stop mode, press the MENU button.
Press the Cursor , button to move to the <Disc Menu> and then
press the ENTER button.
■
) display.
3
4
Press the Cursor , button or numeric buttons to select the
desired chapter and then press the ENTER button.
) display.
0:00:37
,
,
button to select the desired item.
Press the ENTER button.
Press the EXIT button to exit the setup screen.
• The disc menu display may be different depending on the disc.
1/1
MOVE
MP3
,
JPEG
The selected file will be played.
■
When playing an MP3 or JPEG disc, you cannot use the Cursor
To move a folder, press STOP ( ) and then press the Cursor
EXIT
Using the Title Menu
Press the numeric buttons.
■
ENTER
,
,
button to move to a folder.
OPERATION
001/040
When you select Disc Menu and it is not supported by the disc, the <This menu is not
supported> message appears on the screen.
Press the Cursor
Press the numeric buttons to select the desired time and then press
the ENTER button.
01/05
DVD
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
CD
desired title/track (
3
4
CD
GB
DVD
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature
may vary.
button.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
, button to move to the <Title Menu>.
Press the ENTER button.
■
The title menu appears.
Press the EXIT button to exit the setup screen.
• You can press the
button on the remote control to move directly to the desired
title, chapter, or track.
• Depending on the disc, you may not be able to move to the selected title or time.
• The Title menu display may be different depending on the disc.
MOVE
42
ENTER
EXIT
43
HT-TX500_GB-(1~45)-1009
10/19/07 3:10 PM
Page 44
Playing Media Files using the USB Host Feature
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video with 5.1 channel home theater sound by connecting the storage device to the USB port of the home theater.
1
Connect the USB device to the USB port on the side of the unit.
GB
Compatible Devices
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc
in Windows (2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
2
Press the FUNCTION button on the DVD Player or the USB button on the
remote control to select the USB mode.
<USB> appears on the display screen and then disappears.
■
The USB MENU screen appears on the TV screen and the saved file is played.
Supported Formats
To stop playback, press the STOP ( ) button.
Still Picture
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before
disconnecting the USB cable.
Music
(1) Press the STOP ( ) button twice in a row.
The display will show REMOVE USB.
(2) Remove the USB cable.
Movie
• To listen to your music files with 5.1 channel home theater sound, you must set the Dolby
Pro Logic II mode to Matrix. (See page 57)
Skip Forward/Back
During playback, press the
button.
■
When there is more than one file and you press the
button, the next file is selected.
■
When there is more than one file and you press the
button, the previous file is selected.
• CBI
File name
File
extension
Bit rate
Version
Pixel
Sampling
Frequency
JPG
JPG .JPEG
–
–
640x480
–
MP3
.MP3
80~384kbps
–
–
44.1kHz
WMA
.WMA
56~128kbps
V8
–
44.1kHz
WMV
.WMV
4Mbps
V1,V2,V3,V7
720x480 44.1KHz~48KHz
DivX
.AVI,.ASF
4Mbps
DivX3.11~DivX5.1,XviD
800x600 44.1KHz~48KHz
OPERATION
3
■
6. If you use a USB extension cable, the USB device might not be recognized.
(Control/Bulk/Interrupt) is not supported.
• Digital
Cameras that use PTP protocol or require additional program installation when connected
to a PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
• Some MP3 players, when connected to this product,may not operate depending on the sector size
of their file system.
• The USB HOST function is not supported if a product that transfers media files by its manufacturerspecific program is connected.
• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• The
USB host function of this product does not support all USB devices.
For information on the supported devices, see page 70.
Fast Playback
To play back the disc at a faster speed, press the
■
button during playback.
Each time you press either button, the playback speed will change as follows:
2x ➝ 4x ➝ 8x ➝ 32x ➝ Normal.
44
45
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 46
Settings
GB
Setting the Language
Setting TV Screen type
OSD(On-Screen Display) language is set to English by default.
MOVE
ENTER
RETURN
EXIT
1
2
3
4
5
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Select <LANGUAGE> and then press the ENTER button.
Press the Cursor ,
the ENTER button.
button to select <OSD LANGUAGE> and then press
Press the Cursor ,
the ENTER button.
button to select the desired language and then press
MOVE
ENTER
RETURN
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Press the Cursor
ENTER button.
button to move to <TV DISPLAY> and then press the
Press the Cursor
ENTER button.
,
EXIT
4
button to select the desired item and then press the
Once the setup is complete, you will be taken to the previous screen.
Once the setup is complete, the OSD will be English if English has been selected as language.
MOVE
ENTER
RETURN
EXIT
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Adjusting the TV Aspect Ratio (Screen Size)
• OSD LANGUAGE : Selecting the OSD Language
• AUDIO : Selecting the Audio Language (recorded on the disc)
• SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
• DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
If the language you selected is not recorded on the disc, the menu language will not change even
if you set it to your desired language.
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
For a standard TV, select either <4:3PS> or <4:3LB> option according to personal preference. Select <WIDE/HDTV> if you have a
widescreen TV.
4:3PS (4:3 Pan&Scan)
Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.
■ You can see the central portion of the screen only (with the sides of the 16:9 picture cut off).
4:3LB (4:3 Letterbox)
Select this to play a 16:9 picture in the letter box mode on a conventional TV.
■ Black bars will appear at the top and bottom of the screen.
SETUP
• OTHERS : To select another language, select OTHERS and enter the language code of your country.
(See page 69 for language codes) AUDIO, SUBTITLE and DISC MENU language can be
selected.
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is
called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
EXIT
WIDE/HDTV
Select this to view a 16:9 picture in the full-screen mode on your widescreen TV.
■ You can enjoy the widescreen aspect.
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on the software,
the type of TV, and the TV aspect ratio setting.
• In HDMI operation, the screen is automatically converted to Wide mode.
46
47
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 48
Settings (Con’t)
GB
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
MOVE
ENTER
RETURN
EXIT
1
2
3
4
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Press the Cursor
button to move to <PARENTAL> and then press the ENTER button.
Press the Cursor ,
the ENTER button.
DVD
JPEG
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
In Stop mode, press the MENU button.
1
2
During playback, press the PLAY/PAUSE button when an image you like appears.
Press the LOGO button.
<COPY LOGO DATA> will be displayed on the TV screen.
3
button to select the desired rating level and then press
If you have selected Level 6, you cannot view DVDs with Level 7 or higher.
The higher the level, the closer the content is to violent or adult material.
5
Setting the Wallpaper
The power will turn off and then back on.
The selected wallpaper will be displayed.
You can select up to 3 wallpaper settings.
COPY LOGO DATA
Enter the password and then press the ENTER button.
The password is set to "7890" by default.
Once the setup is complete, you will be taken to the previous screen.
MOVE
SELECT
RETURN
EXIT
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
To Select One of the 3 Wallpaper Settings you've made
• This function works only if a DVD disc contains the rating level information.
Setting the Password
MOVE
ENTER
RETURN
EXIT
1
2
3
4
You can set the password for the Parental (rating level) setting.
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Press the Cursor
button to move to <LOGO> and then press the ENTER button.
Press the Cursor , button select the desired <USER>, and then
press the ENTER button.
This selects one of the 3 wallpaper screens
MOVE
ENTER
RETURN
In Stop mode, press the MENU button.
Press the Cursor
Press the Cursor
ENTER button.
RETURN
• ORIGINAL : Select this to set the Samsung Logo image as your wallpaper.
button to move to <PASSWORD> and then press the
• USER : Select this to set the desired image as your wallpaper.
MOVE
SELECT
RETURN
EXIT
Press the ENTER button.
Enter the password and then press the ENTER button.
Enter the old password, a new password, and confirm new password.
The setting is complete.
SELECT
Press the EXIT button to exit the setup screen.
EXIT
4
5
MOVE
5
button to move to <Setup> and then press the ENTER button.
SETUP
1
2
3
EXIT
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
• The password is set to "7890" by default.
If you have forgotten the rating level password, do the following
• While the player is in <No Disc> mode, hold the DVD Player's STOP (
and all settings will return to the default values.
• Press the POWER button.
) button for longer than 5 seconds. “INITIAL” appears on the display
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
48
49
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 50
Settings (Con’t)
GB
DVD Playback Mode
Setting the Delay Time
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
2
3
MOVE
ENTER
RETURN
EXIT
4
Press the EJECT button and then press the MENU button.
Press the Cursor button to move to <Setup> and then press the
ENTER button.
Press the Cursor button to move to <DVD TYPE> and then press the
ENTER button.
Press the Cursor , button to move to <DVD VIDEO> and then press the
ENTER button.
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio
signals from the center and rear speakers.
1
2
3
MOVE
ENTER
RETURN
EXIT
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
• DVD AUDIO : set to play the default DVD audio.
MOVE
ENTER
RETURN
In Stop mode, press the MENU button.
Press the Cursor
Press the Cursor
ENTER button.
DivX (R) registration
4
Press the Cursor , ,
press the ENTER button.
5
Press the Cursor
Setting the Speaker Mode
MOVE
CHANGE
RETURN
EXIT
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by
adding a delay effect to the sound of the Center and Surround Speakers.
RETURN
EXIT
Distance between Df and Dc 0.00 m
Delay Time
In Stop mode, press the MENU button.
Press the Cursor
In the <SPEAKER SETUP>, press the ENTER button again.
,
button to move to the desired speaker and then
0 ms
0.34 m
0.68 m
1 ms
2 ms
1.02 m 1.36 m 1.70 m
3 ms
4 ms
5 ms
Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds in the figure, set the mode
as 0ms. Otherwise, change the setting according to the table.
button to move to <Audio> and then press the ENTER button.
Press the Cursor , ,
press the ENTER button.
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the distance of Df in the figure,
set the mode as 0ms. Otherwise, change the setting according to the table.
SETUP
EXIT
1
2
3
4
For L and R, the mode is set to SMALL.
CHANGE
button to set the Delay time.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Ideal CENTER SPEAKER
placement
For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows :
SMALL ➝ NONE.
MOVE
button to move to the desired speaker and then
You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and
15mSEC.
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker
configuration and whether certain speakers are used or not.
RETURN
,
,
Setting up the Speaker Delay Time
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
ENTER
button to move to <DELAY TIME> and then press the
EXIT
• DVD Play mode is set to DVD Audio as factory default setting.
• Powering off the main unit will automatically switch to the DVD Audio mode.
MOVE
button to move to <Audio> and then press the ENTER button.
Ideal
SURROUND
SPEAKER
placement
Distance between Df and Dc
0.00 m
1.02 m
2.04 m
Delay Time
0 ms
3 ms
6 ms
3.06 m 4.08 m 5.10 m
9 ms
12 ms
15 ms
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
• SMALL : Select this when using the speakers.
• NONE : Select this when no speaker is connected.
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary
(see page 57).
• With
(Dolby Pro Logic II), the delay time may be different for each mode.
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• The Center channel is only adjustable on 5.1 channel discs.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
50
51
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 52
Settings (Con’t)
GB
Setting the Test Tone
Setting the Audio
Use the Test Tone feature to check the speaker connections.
1
2
3
MOVE
ENTER
RETURN
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
Press the Cursor
ENTER button.
button to move to <Audio> and then press the ENTER button.
button to move to <TEST TONE> and then press the
The test tone will be sent to L ➝ C ➝ R ➝ SR ➝ SL ➝ SW in order.
EXIT
You can adjust the balance and level for each speaker.
MOVE
ENTER
RETURN
EXIT
If the ENTER button is pressed again at this time, the test tone will stop.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
button to move to <Audio> and then press the ENTER button.
Press the Cursor
ENTER button.
button to move to <SOUND EDIT> and then press the
Press the Cursor
Press the Cursor
,
,
button to select and adjust the desired item.
button to adjust the settings.
CHANGE
RETURN
EXIT
EXIT
Alternative method: press the TEST TONE button on the remote.
Multi-Channel Pro Logic Mode
Press the TEST TONE button.
■
■
■
C: Center Speaker
SL: Rear Speaker (L)
SW: Subwoofer
SR: Rear Speaker (R)
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Press the SOUND EDIT button and then press the Cursor
,
button.
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
Use this function to check that each speaker is correctly connected and that there is
no problem.
SETUP
Start
L: Front Speaker (L)
R: Front Speaker (R)
Press the Cursor
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
STOP
4
In Stop mode, press the MENU button.
When HDMI AUDIO is on (audio is produced through TV speakers), the
TEST TONE function is not available.
To end the test tone, press the TEST TONE button again.
Adjusting Front/Rear Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
52
53
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 54
Settings (Con’t)
GB
Setting the DRC (Dynamic Range Compression)
Setting the HDMI Audio
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
1
2
3
4
MOVE
ENTER
RETURN
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
Press the Cursor
button to move to <DRC> and then press the ENTER button.
Press the Cursor
,
button to adjust the DRC.
MOVE
EXIT
When the Cursor
button is pressed, the effect is greater, and when the Cursor
ENTER
RETURN
EXIT
button is
4
pressed, the effect is smaller.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
Press the Cursor
ENTER button.
button to move to <HDMI AUDIO> and then press the
Press the Cursor
ENTER button.
,
button to select <ON> or <OFF> and then press the
• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
CHANGE
RETURN
MOVE
EXIT
SELECT
RETURN
EXIT
• OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
Setting the AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
MOVE
ENTER
RETURN
EXIT
4
In Stop mode, press the MENU button.
Press the Cursor
Press the Cursor
ENTER button.
button to move to <Audio> and then press the ENTER button.
button to move to <AV-SYNC> and then press the
SETUP
1
2
3
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Press the Cursor , button to select the AV-SYNC Delay Time and then
press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
54
SELECT
RETURN
EXIT
55
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 56
Settings (Con’t)
GB
Sound Field (DSP)/EQ Function
Dolby Pro Logic II Mode
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments.
EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
You can select the desired Dolby Pro Logic II audio mode.
Press the
Press the DSP/EQ button.
“DSP” appears on the display panel.
MUSIC
Each time the button is pressed, the selection changes as follows
POPS
➝
JAZZ
➝
MOVIE
➝
➝
CHURCH
PL II MODE button.
Each time the button is pressed, the mode changes as follows.
ROCK
➝
➝
STUDIO
➝
CLUB
➝
➝
CINEMA
➝
PRO LOGIC
➝
MATRIX
➝
STEREO
HALL
PASS
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the
actual performance.
• POPS, JAZZ, ROCK : Depending on the genre of music, you can select POP, JAZZ, and ROCK.
• STUDIO : Provides a sense of presence as if in a studio.
• CLUB : Simulates the sound of a dance club with a throbbing bass beat.
• HALL : Provides a clear vocal as if listening in a concert hall.
• MOVIE : Provides the feeling of a movie theater.
• CHURCH : Gives the feel of being in a grand church.
• PASS : Select this for normal listening.
• The DSP/EQ function is only available in STEREO mode.
Press the
PL II mode button to show STEREO on the display.
• This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and Dolby Digital discs.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and DSP/EQ function does not work.
• CINEMA : Adds realism to the movie soundtrack.
• PRO LOGIC : You will experience a realistic multi-channel effect, as if using five speakers, while
using just the front left and right speakers.
• MATRIX : You will hear 5.1 channel surround sound.
STEREO : Select this to listen to sound from the front left and right speakers and the subwoofer only.
• When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to
surround sound.
SETUP
56
57
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 58
Settings (Con’t)
Listening to Radio
Remote Control
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
1
2
Press the
PL II MODE button to select <MUSIC> mode.
Press the
Cursor ,
PL II EFFECT button to select <PANORAMA>, then press the
buttons to select the desired effect setting.
You can select either 0 or 1.
This mode extends the front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
3
Press the
Cursor
PL II EFFECT button to select <C-WIDTH>, then press the
,
button to select the desired effect setting.
You can select between 0 and 7.
This sets the width of the center image. The higher the setting, the less sound comes from the
center speaker.
4
GB
Press the
Cursor ,
PL II EFFECT button to select <DIMENSION>, then press the
button to select the desired setting
You can select between 0 and 6.
Incrementally adjusts the sound field (DSP) from the front or rear.
1
2
Press the TUNER button to select the FM band.
Tune in to the desired station.
Automatic Tuning 1 : When the
button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the
broadcasting stations.
Manual Tuning : Briefly press the
,
,
button to automatically search for active
button to increase or decrease the frequency incrementally.
Main Unit
1
2
Press the FUNCTION button to select the FM band.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( ) button to select <PRESET> and then press the
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( ) button to select <MANUAL> and then press and hold
the
button to automatically search the band.
Manual Tuning : Press the STOP ( ) button to select <MANUAL> and then briefly press the
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select <MONO> for a clear, interference-free broadcast.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and the
(Dolby Pro Logic II) button does not work.
MISCELLANEOUS
58
59
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 60
Listening to Radio (Con’t)
About RDS broadcasting
Presetting Stations
Using the RDS (Radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations
send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
Example : Presetting FM 89.10 in the memory
1
2
When tuned to an FM station which provides the RDS service, the RDS
indicator lights up on the display.
Press the TUNER button to select the FM band.
Press the
,
GB
button to select <89.10>.
Description on RDS function
• PTY (Program Type) : Displays the type of programme currently being broadcast
3
• PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed
of 8 characters.
Press the TUNER MEMORY button.
• RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum
64 characters.
<CH 1> flashes in the display.
4
Press the
button to select preset number.
• TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in
progress.
You can select between 1 and 15 presets.
5
• CT (Clock Time) : Decodes the real time clock from the FM frequency.
Some stations may not transmit PTY, RT or CT information therefore this may
not be displayed in all cases.
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before “Number” disappears from the display.
• RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if
the signal strength is weak.
“Number” disappears from the display and the station is stored in memory.
6
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
control to select a channel.
TO show the RDS signals
button on the remote
You can see the RDS signals the station sends on the display.
Press RDS DISPLAY while listening to an FM station.
Each time you press the button, the display change to show you the following information:
PS NAME ➝ RT ➝ CT ➝ Frequency
• This unit does not receive AM broadcasts.
• PS (Program Service) : While searching, "PS" appears and then the station names will be
displayed. "NO PS" appears if no signal is sent.
• RT(Radio Text) : while searching, "RT" appears and then text messages the station sends will be
displayed. "NO RT" appears if no signal is sent.
• Frequency : station frequency (non-RDS service)
When the display shows PS,or RT signals,the following characters are used.
• The display window cannot differentiate upper case and lower case letters and always uses
upper case letters.
• The display window cannot show accented letters, “A,” for instance, may stands for accented
“A’s” like “À, Â, Ä, Á, Å and Ã.”
MISCELLANEOUS
About characters shown in the display
• If searching finishes at once, “PS”, and “RT” will not appear on the display.
60
61
HT-TX500_GB-(46~71)-1009
10/19/07 3:12 PM
Page 62
Convenient Functions
About RDS broadcasting (Con’t)
PTY (Program Type) indication and PTY-SEARCH function
One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by
specifying the PTY codes.
GB
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Press the SLEEP button.
To search for a program using the PTY codes
Each time the button is pressed, the preset time changes as follows :
10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF.
Before you start, remember...
• The PTY Search is only applicable to preset stations.
• To stop searching any time during the process, press PTY SEARCH while searching.
• There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.
• When pressing the buttons on the primary remote control, make sure that you have selected the FM
To confirm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Theater will shut itself off is displayed.
Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press the SLEEP button until <OFF> appears on
the display.
station using the primary remote control.
1
2
3
AFFAIRS
INFO
SPORT
EDUCATE
CULTURE
SCIENCE
62
Press the DIMMER button.
Each time the button is pressed, the brightness of front display will be adjusted.
Press PTY SEARCH again, while the PTY code selected in the previous step
is still on the display.
• The center unit searches 15 preset FM stations, stops when it finds the
one you have selected, and tunes in that station.
News including an announced opinion and
report
Several matters including a current incident,
documentary, discussion and analysis.
Information including weights and measures,
returns and forecast, matters interesting the customer, medical information, etc.
Display
CLASSICS
Program Type
Heavy classical music-Orchestra music,
symphony, chamber music and opera
OTHER M
Other music - Jazz, R&B country music
Each time you press and hold the DIMMER button for more than 2 seconds,
Weather
the following functions are selected in order: BUZZER ➝ HOLD
FINANCE
Finance
Children’s programmes
SOCIAL A
Social affairs
Drama-Radio serial, etc.
RELIGION
Religion
Culture-National or local culture including the
religious problem, social science, language,
theater, etc.
PHONE IN
Phone in
TRAVEL
Travel
Natural science and technology
LEISURE
Leisure
Sports
Education
VARIED
POP M
Pop music
ROCK M
Rock music
M.O.R.M
Current contemporary music considered to be
“easy listening.”
Light classical music- Classical music and
instrumental and chorus music
BUZZER/HOLD FUNCTION
WEATHER
CHILDREN
Others-Speech, amusing program (quiz, game),
interview, comedy and satirical play, etc.
LIGHT M
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
JAZZ
Jazz Music
COUNTRY
Country Music
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
DOCUMENT
Documentary
BUZZER : Turns off the buzzer that rings each time you press any of the top buttons on the main
unit.Each time you press and release the DIMMER but-ton, it toggles between BUZZER
ON and OFF.
HOLD : Locks the top buttons on the main unit. Each time you press and release the DIMMER
button, it toggles between HOLD ON and OFF.
Mute Function
This is useful when answering a doorbell or telephone call.
MISCELLANEOUS
DRAMA
Press the PTY- or PTY+ until the PTY code you want appears on the display.
• The display gives you the PTY codes described to the right.
Program Type
Display
NEWS
Adjusting Display Brightness
Press PTY SEARCH while listening to an FM station.
Press the MUTE button.
“
” appears in the display.
To restore the sound, press the MUTE button again.
63
HT-TX500_GB-(46~71)-1009
10/19/07 3:13 PM
Page 64
Operating a TV with the Remote Control
GB
When operating a TV with the remote control
1
2
3
Press the TV button to set the remote to TV mode.
No.
Brand
Code
No.
Brand
Press the POWER button to turn on the TV.
1
Admiral (M.Wards)
56, 57, 58
44
MTC
18
2
A Mark
01, 15
45
NEC
18, 19, 20, 40, 59, 60
While holding down the POWER button, enter the code corresponding
to your brand of TV.
3
Anam
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12,
46
Nikei
03
13, 14
47
Onking
03
If there is more than one code listed for your TV in the table, enter one at a time to
determine which code works.
Example : For a Samsung TV
While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 and 40.
4
If the TV turns off, the setting is complete.
You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).
• The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.
• If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Code
4
AOC
01, 18, 40, 48
48
Onwa
03
5
Bell & Howell (M.Wards)
57, 58, 81
49
Panasonic
06, 07, 08, 09, 54, 66, 67, 73, 74
6
Brocsonic
59, 60
50
Penney
18
7
Candle
18
51
Philco
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
8
Cetronic
03
52
Philips
15, 17, 18, 40, 48, 54, 62, 72
9
Citizen
03, 18, 25
53
Pioneer
63, 66, 80, 91
10
Cinema
97
54
Portland
15, 18, 59
11
Classic
03
55
Proton
40
12
Concerto
18
56
Quasar
06, 66, 67
13
Contec
46
57
Radio Shack
17, 48, 56, 60, 61, 75
14
Coronado
15
58
RCA/Proscan
18, 59, 67, 76, 77, 78, 92, 93, 94
15
Craig
03, 05, 61, 82, 83, 84
59
Realistic
03, 19
16
Croslex
62
60
Sampo
40
17
Crown
03
61
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60,
18
Curtis Mates
59, 61, 63
19
CXC
03
62
Sanyo
19, 61, 65
20
Daewoo
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
63
Scott
03, 40, 60, 61
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
64
Sears
15, 18, 19
15, 57, 64
98
21
Daytron
40
65
Sharp
22
Dynasty
03
66
Signature 2000 (M.Wards)
57, 58
23
Emerson
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
67
Sony
50, 51, 52, 53, 55
24
Fisher
19, 65
68
Soundesign
03, 40
25
Funai
03
69
Spectricon
01
26
Futuretech
03
70
SSS
18
27
General Electric (GE)
06, 40, 56, 59, 66, 67, 68
71
Sylvania
18, 40, 48, 54, 59, 60, 62
28
Hall Mark
40
72
Symphonic
61, 95, 96
29
Hitachi
15, 18, 50, 59, 69
73
Tatung
06
30
Inkel
45
74
Techwood
18
31
JC Penny
56, 59, 67, 86
75
Teknika
03, 15, 18, 25
32
JVC
70
76
TMK
18, 40
33
KTV
59, 61, 87, 88
77
Toshiba
19, 57, 63, 71
34
KEC
03, 15, 40
78
Vidtech
18
35
KMC
15
79
Videch
59, 60, 69
36
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
80
Wards
15, 17, 18, 40, 48, 54, 60, 64
37
38
Luxman
18
81
Yamaha
18
LXI (Sears)
19, 54, 56, 59, 60, 62, 63, 65, 71
82
York
40
39
Magnavox
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
83
Yupiteru
03
40
Marantz
40, 54
84
Zenith
58, 79
41
Matsui
54
85
Zonda
01
42
MGA
18, 40
86
Dongyang
03, 54
43
Mitsubishi/MGA
18, 40, 59, 60, 75
MISCELLANEOUS
64
TV Brand Code List
65
HT-TX500_GB-(46~71)-1009
10/19/07 3:13 PM
Page 66
Troubleshooting
GB
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized
dealer or Samsung Electronics Service Center.
Symptom
I cannot eject the disc.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
Symptom
Check/Remedy
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles
do not work.
• Audio language and subtitles will not work if the disc does not
DVD discs purchased from abroad may not be playable.
Playback does not start.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on
•
the surface?
Wipe the disc clean.
Menu screen does not appear
even when the menu function is
selected.
• No sound is heard during fast playback, slow playback, and step
Sound is not produced.
•
•
•
Sound can be heard only from a
few speakers and not all six.
•
•
motion playback.
Are the speakers connected properly? Is the speaker setup
correctly customized?
Is the disc severely damaged?
When listening to a CD or radio, sound is output to the front
PL II
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• The main unit is not working.
(Example: The power goes out
or strange noise is heard.)
• The DVD player is not working
normally.
66
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
•
the main unit's STOP ( ) button for longer than 5 seconds.
<INITIAL> appears on the display and all settings will return to the
default values.
Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
• Is the remote control being operated within its operation range of
•
•
) button on the main unit
for longer than 5 seconds.
The password for rating level
has been forgotten.
Can't receive radio broadcast.
The remote control does not
work.
• Turn off the power and hold the STOP (
• While <No Disc> message appears on the display of main unit, hold
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
angle and distance?
Are the batteries exhausted?
Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
Aspect ratio cannot be changed.
While listening to TV audio
through the main unit,
no sound is heard.
MISCELLANEOUS
•
• Are you using a disc that does not contain menus?
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
Dolby Digital 5.1 CH Surround
Sound is not produced.
contain them.
• If the eject button is pressed while listening to TV audio using
the D.IN, AUX functions, the DVD functions are turned on and this
stops the TV audio.
67
HT-TX500_GB-(46~71)-1009
10/19/07 3:13 PM
Page 68
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Code
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get on
the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
• Condensation may form if warm air comes into contact with cold parts inside
the player. When condensation forms inside the player, the player may not
operate correctly. If this occurs, remove the disc and let the player stand for
1 or 2 hours with the power on.
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1181
Frisian
1334
Latvian, Lettish
1506
Slovenian
1028
Abkhazian
1183
Irish
1345
Malagasy
1507
Samoan
1032
Afrikaans
1186
Scots Gaelic
1347
Maori
1508
Shona
1039
Amharic
1194
Galician
1349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
1511
Albanian
1045
Assamese
1203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
1209
Hausa
1353
Moldavian
1513
Siswati
1052
Azerbaijani
1217
Hindi
1356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
1357
Malay
1515
Sundanese
1057
Byelorussian
1229
Hungarian
1358
Maltese
1516
Swedish
1059
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
1239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
Turkmen
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1142
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
1166
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
MISCELLANEOUS
When you get fingerprints or dirt on the disc, clean it with a mild
detergent diluted in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the outside of the
disc.
68
GB
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 46).
Handling discs
Do not keep in
direct sunlight
Language Code List
69
HT-TX500_GB-0929(46~71)
10/9/07 6:55 PM
Page 70
USB Host Feature Supported Products
Digital Camera
Specifications
USB Flash Disc
Power Consumption
Product
Company
Type
Fuji
Fuji
Fuji
Fuji
Fuji
Fuji
Konica
Kyocera
Kyocera
Kyocera
Kyocera
Minolta
Minolta
Minolta
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Panasonic
Panasonic
Panasonic
Panasonic
Pentax
Pentax
Pentax
Pentax
Samsung
Samsung
Toshiba
Nikon
Nikon
Nikon
Panasonic
Minolta
Olympus
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Product
Cruzer Micro
Cruzer Mini
Cruzer Mini
SONY Micro Vault
FLEX DRIVE
AnyDrive
XTICK
Micro Mini
iFlash
LG
RiDATA
Company
Type
Sandisk
Sandisk
Sandisk
Sony
Serotech
A.L tech
LG
Iomega
Imation
XTICK(M)
EZDrive
USB 2.0 USB Flash Drive 128M
USB 2.0 128M
USB 2.0 256M
USB 2.0 64MB
USB 2.0 32MB
USB 2.0 128MB
USB 2.0 128M
USB 2.0 128M
USB 2.0 64M
USB 2.0 64M
USB 2.0 64M
MP3 Player
Subwoofer
Main
Unit
Weight
Stand
Dimensions (W x H x D) Main Unit
Stand
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
GENERAL
FM TUNER
VIDEO OUTPUT
Product
Company
Type
Creative MuVo NX128M
Iriver H320
YH-920
YP-T7
YP-MT6
YP-T6
YP-53
YP-ST5
YP-T5
YP-60
YP-780
YP-35
YP-55
iAUDIO U2
iAUDIO G3
iAudio M3
SI-M500L
H10
YP-T5 VB
YP-53
Creative
Iriver
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Cowon
Cowon
Cowon
Sharp
Iriver
Samsung
Samsung
128 MB MP3 Player
20G HDD MP3 Player
20G HDD MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
HDD MP3 Player
256MB MP3 Player
MP3 Player
MP3 Player
256MB MP3 Player
AMPLIFIER
HDMI
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)500mV
Component Video
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
5.1ch speaker system
Front/Center/Rear speaker
Subwoofer speaker
3Ω
3Ω
140Hz~20kHz
35Hz~160Hz
88dB/W/M
90dB/W/M
167W
165W
334W
330W
Front/Rear
Center
Weights
70
30W
100W
3.1Kg
5.9Kg
188 x 519 x 86 mm
350 x 350 x 1025 mm
+5°C~+35°C
10% ~ 75%
10dB
60dB
0.5%
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Impedance: 85~115Ω
167W x 2(3Ω)
167W(3Ω)
167W x 2(3Ω)
165W(3Ω)
20Hz~20KHz
Speaker system
SPEAKER
Main Unit
Front/Rear
Center
106 x 1310 x 85 mm
(Stand Base 340)
427 x 108 x 85 mm
5.1Kg
1.6Kg
270 x 496 x 410 mm
13Kg
MISCELLANEOUS
Finepix-A340
Finepix-F810
Finepix-F610
Finepix-f450
Finepix S7000
Finepix A310
KD-310Z
Finecam SL300R
Finecam SL400R
Finecam S5R
Finecam Xt
Dimage-Z1
Dimage Z1
Dimage X21
Coolpix4200
Coolpix4300
Coolpix 2200
Coolpix 3500
Coolpix 3700
Coolpix 4100
Coolpix 5200
Stylus 410 digital
300-digital
U300
X-350
C-760
C-5060
X1
U-mini
Lumix-FZ20
DMC-FX7GD
Lumix LC33
LUMIX DMC-F1
Optio-S40
Optio-S50
Optio 33LF
Optio MX
Digimax-420
Digimax-400
Sora PDR-T30
Coolpix 5900
Coolpix S1
Coolpix 7600
DMC-FX7
Dimage Xt
AZ-1
GB
71
HT-TX500_GB-0929(46~71)
10/9/07 6:55 PM
Page 72
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Region
North America
Latin America
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
Europe
CIS
Asia Pacific
Middle East &
Africa
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
Republic of Ireland
AUSTRIA
Switzerland
RUSSIA
KAZAHSTAN
UZBEKISTAN
KYRGYZSTAN
UKRAINE
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
New zealand
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
Turkey
SOUTH AFRICA
U.A.E
Customer Care Center 1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421 , 4004-0000
800-SAMSUNG(726-7864)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303
01-8000112112
0032 (0)2 201 24 18
844 000 844
Distributor pro Českou republiku :
Samsung Zrt., česka organizační složka Vyskočilova
4, 14000 Praha 4
70 70 19 70
030-6227 515
3260 SAMSUNG(726-7864) or
08 25 08 65 65 ( 0,15/Min)
01805 - 121213 ( 0,14/Min)
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
0035 (0)2 261 03 710
0900 20 200 88 ( 0,10/Min)
815-56 480
0 801 801 881 , 022-607-93-33
80 8 200 128
0800-SAMSUNG(726-7864)
902 10 11 30
0771-400 200
0870-SAMSUNG(726-7864)
0818 717 100
0800-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
8-800-555-55-55
8-10-800-500-55-500
8-800-120-0-400
00-800-500-55-500
8-800-502-0000
8-800-77777
800-7267
800-7267
1300 362 603
0800SAMSUNG(726-7864)
800-810-5858 , 010-6475 1880
3698-4698
3030 8282 , 1800 110011
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232 , 02-689-3232
0800-329-999
1 800 588 889
444 77 11
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864),
8000-4726
Web Site
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com/us
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.com/be
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ie
www.samsung.com/at
www.samsung.com/ch
www.samsung.ru
www.samsung.kz
www.samsung.uz
www.samsung.ua
www.samsung.lt
www.samsung.com/lv
www.samsung.ee
www.samsung.com/au
www.samsung.com/nz
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com.tr
www.samsung.com/za
www.samsung.com/mea
TX500_QG(wall)_GB
10/5/07 9:15 PM
Page 2
Using the Wall Mount Kit
Model Name : HT-TX500
2
1
1
Insert the BRACKET-HOLDER into the back side of the product so that it fits
into 2 protruding guides, and then use 3 screws to fasten it.
2
Place the BRACKET-WALLMOUNT on the desired wall with the arrow facing
upward, and then fasten 4 screws to fix it.
3
Insert the BRACKET-HOLDER into the BRACKET-WALLMOUNT so that 4
holes of the holder fit into the latch of the wall mount.
■
Please make sure the product was secured firmly. Otherwise, it may fall from the
wall, causing injury or damage to the product.
■
Take caution not to allow children pulling out the connection cables of the wall
mounting system. The product may fall from the wall.
Cautions
Accessories – Please check all parts included before assembly and installation.
BRACKET-HOLDER
BRACKET-WALLMOUNT
Download PDF