Samsung | VLUU I7 | Samsung i7 User Manual

User Manual
Thank you for buying a Samsung camera.
This manual will guide you through using the camera, including
capturing images, downloading images and using the application software.
Please read this manual carefully before using your new camera.
ENGLISH
Instructions
Getting to know your camera
ƈ Use this camera in the following order.
Set up the camera driver
Take a picture
Insert the USB cable
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.111)
Take a picture. (p.17)
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.113)
Thank you for buying a Samsung Digital Camera.
ƃ Prior to using this camera, please read the user manual thoroughly.
ƃ When you require After Sales service, please bring the camera and the cause of
the camera malfunction (such as battery, Memory card etc.) to the A/S centre.
ƃ Please check that the camera is operating properly prior to when you intend to
use it (e.g. for a trip or an important event) to avoid disappointment. Samsung
camera takes no responsibility for any loss or damages that may result from
camera malfunction.
ƃ Keep this manual in a safe place.
ƃ If you use a card reader to copy the images on the memory card to your PC, the
images could be damaged. When transferring the images taken with the camera
to your PC, be sure to use the supplied USB cable to connect the camera to
your PC. Please note that the manufacturer accepts no responsibility for loss or
damage of images on the memory card due to the use of a card reader.
Ҭ Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
Ҭ
is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.
Ҭ All brand and product names appearing in this manual are registered trademarks.
Ҭ The contents and illustrations of this manual are subject to change without prior
notice for upgrading the camera functions.
HD
Check the camera’s power
Check the camera’s power. If the power is
turned off, press the camera button to turn
it on. (p.12)
Check [Removable Disk]
Open Windows EXPLORER and search
for [Removable Disk]. (p.114)
ŝ1Ş
Danger
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
ƈ Do not attempt to modify this camera in any way. To do so may result in fire,
injury, electric shock or severe damage to you or your camera. Internal
inspection, maintenance and repairs should only be carried out by your dealer or
Samsung Camera Service centre.
ƈ Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
ƈ Should any form of liquid or a foreign object enter the camera, do not use it.
Switch off the camera, and then disconnect the power source. You must contact
your dealer or Samsung Camera Service centre. Do not continue to use the
camera as this may cause a fire or electric shock.
ƈ Do not insert or drop metallic or inflammable foreign objects into the camera
through access points e.g. the memory card slot and battery chamber.
This may cause a fire or electric shock.
ƈ Do not operate this camera with wet hands. This could pose a risk of electric
shock.
ŝ2Ş
Warning
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
ƈ Do not use the flash in close proximity to people or animals. Positioning the flash
too close to your subject’s eyes may cause eyesight damage.
ƈ For safety reasons keep this product and accessories out of reach of children or
animals to prevent accidents e.g.:
ҮSwallowing battery or small camera accessories. If an accident should occur,
please consult a doctor immediately.
ҮThere is the possibility of injury from the camera’s moving parts.
ƈ Battery and camera may become hot during prolonged use and it may result in
camera malfunction. Should this be the case, allow the camera to sit idle for a
few minutes to allow it time to cool.
ƈ Do not leave this camera in places subject to extremely high temperatures, such
as a sealed vehicle, direct sunlight or other places of extremes in temperature.
Exposure to extreme temperatures may adversely affect the camera’s internal
components and could cause a fire.
ƈ When in use, do not cover the camera or Charger. This may cause heat to build
up and distort the camera body or cause a fire. Always use the camera and its
accessories in a well-ventilated area.
Caution
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in a minor or moderate injury.
ƈ Leaking, overheating, or damaged battery could result in fire or injury.
ҮUse battery with the correct specification for the camera.
ҮDo not short circuit, heat or dispose of battery in fire.
ҮDo not insert the battery with the polarities reversed.
ƈ Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
ƈ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
ƈ Do not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the wall
socket. Then make sure that any connector cords or cables to other devices are
disconnected before moving the camera. Failure to do so may damage the cords
or cables and cause a fire or electric shock.
ƈ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
ƈ Avoid obstructing the lens or the flash when you capture an image.
ƈ When using this camera in low temperature, the following cases may be found.
These are not camera malfunctions and usually recover at normal temperature.
- It takes more time to turn on the LCD monitor and the colour may be differ from
the subject.
- When changing the composition, there may be after image on the LCD monitor.
ƈ When you turn on the camera by rotating the LCD monitor, take care not to drop
the camera.
Contents
READY
ƃSystem chart ōōōōōōōōō5
ƃIdentification of features ōōōōō6
ƃConnecting to a Power Source ōō8
ƈUsing an AC cableōōōōōōō9
ƈUsing a USB cable ōōōōōō9
ƈHow to charge the rechargeable
battery (SLB-1137C) ōōōōōō9
ƃInserting the memory card ōōō10
ƃInstructions on how to use the
memory card ōōōōōōōōō11
ƃWhen Using the Camera for the First Time ō12
RECORDING
ƃWhen Using the Camera for the First
Time: Touch Screen ōōōōōō14
ƃStarting the recording mode ōō15
ƈSelecting modes ōōōōōōō16
ƈHow to use the AUTO mode ōō17
ƈHow to use the PROGRAM mode ō17
ƈHow to use the ASR (Advanced
Shake Reduction) mode ōōōō18
ƈWise Shot ōōōōōōōōōō18
ƈHow to use the MOVIE CLIP mode ō19
ƈPausing while recording a movie clip
(Successive Recording) ōōōō19
ƈHow to use the SCENE mode ō19
ƈFace recognition ōōōōōōō20
ƃThings to watch out for when taking pictures ō21
ƃFocus lock ōōōōōōōōōō22
ƃUsing the camera buttons to set the
camera ōōōōōōōōōōō23
ƈPOWER button ōōōōōōō23
ƈSHUTTER button ōōōōōō23
ƈFR (Face Recognition) / Lock button ō23
ƈZOOM W / T buttonōōōōōō24
ƈMode button ōōōōōōōōō25
ƈInfo buttonōōōōōōōōōō25
ƈSetting up the camera mode ōō26
ƈSelf-timer ōōōōōōōōōō26
ƈMacro ōōōōōōōōōōō27
ƈFlash ōōōōōōōōōōōō28
ƈImage Size ōōōōōōōōō30
ƈQuality / Frame rate ōōōōō31
ƈMetering ōōōōōōōōōō31
ƈContinuous shot ōōōōōōō32
ƈISO ōōōōōōōōōōōō32
ƈWhite balance ōōōōōōōō33
ƈExposure compensation ōōōō34
ƈMovie Clip frame stabiliser ōōō34
ƃUsing the LCD monitor to adjust the
camera settings ōōōōōōōō35
ƈAuto Focus type ōōōōōōō35
ƈVoice Memo ōōōōōōōōō36
ƈVoice Recording ōōōōōōō36
ƈSharpness ōōōōōōōōō37
ƈContrast ōōōōōōōōōō38
ƈRecording the movie clip without voiceō38
ŝ3Ş
Contents
ƈEffectōōōōōōōōōōōō39
ƈEffect : Colour Effect ōōōōō40
ƈEffect : Image editing ōōōōō42
ƈEffect : FUN ōōōōōōōōō43
PLAY
ƃStarting play mode ōōōōōō49
ƈPlaying back a still image ōōō49
ƈPlaying back a movie clip ōōō49
ƈMovie clip capture function ōōō50
ƈOn camera movie trimming ōō50
ƈPlaying back a recorded voice ō51
ƈPlaying back a voice memo ōō51
ƃLCD monitor Indicator ōōōōō52
ƃUsing the camera buttons to adjust
the camera ōōōōōōōōō53
ƈPlay mode buttonōōōōōōō53
ƈThumbnail/ Enlargement button /
Volume button ōōōōōōōō53
ƈInfo buttonōōōōōōōōōō55
ƈPrinter button ōōōōōōōō55
ƈDelete icon ōōōōōōōōō56
ƈEffect: Image Editing ōōōōō56
ƈEffect: Colour ōōōōōōōō58
ƈEffect: Image adjustment ōōō60
ƈEffect: Fun ōōōōōōōōō62
ƃSetting up the play back function
using the LCD monitor ōōōōō69
ƈSlide Show ōōōōōōōōō70
ŝ4Ş
ƈVoice memo ōōōōōōōōō72
ƈProtecting images ōōōōōō73
ƈDeleting images ōōōōōōō74
ƈDPOF ōōōōōōōōōōō74
ƈDPOF : STANDARD ōōōōō75
ƈDPOF : Index ōōōōōōōō75
ƈDPOF : Print sizeōōōōōōō76
ƈCopy To Card ōōōōōōōō76
ƈPictBridge ōōōōōōōōōō77
ƈPictBridge : Picture Selection ōō78
ƈPictBridge : Print Setting ōōōō78
ƈPictBridge : Reset ōōōōōō79
ƈSound menuōōōōōōōōō79
ƈSound ōōōōōōōōōōō80
SETUP
ƃSetup menu ōōōōōōōōō81
ƃSetup menu 1 ōōōōōōōō82
ƈ File nameōōōōōōōōōō82
ƈ LANGUAGE ōōōōōōōō83
ƈSetting up the Date / Time / Date type ō83
ƈImprinting the recording date ōō84
ƈLCD brightness ōōōōōōō84
ƈAuto Focus lamp ōōōōōōō84
ƈStart up image ōōōōōōōō85
ƃSetup menu 2 ōōōōōōōō85
ƈQuick view ōōōōōōōōō85
ƈAuto power off ōōōōōōōō86
ƈLCD save ōōōōōōōōōō86
ƈCalibration ōōōōōōōōō87
ƈSelecting Video out type ōōōō87
ƈFormatting a memory ōōōōō88
ƈInitialisation ōōōōōōōōō89
MP3/ PMP/ TEXT VIEWER Mode
ƃMP3 / PMP / TEXT VIEWER Modeō89
ƈDownloading filesōōōōōōō90
ƃStarting the MP3 / PMP / TEXT
VIEWER mode ōōōōōōōō91
ƃLCD monitor indicator for MP3 / PMP /
TEXT VIEWER mode ōōōōōō92
ƃUsing the camera buttons to adjust
the camera ōōōōōōōōō93
ƈVolume button / icon ōōōōō93
ƈPlay & Pause / Control icon ōō94
ƈHold button ōōōōōōōōō94
ƈEqualizer icon ōōōōōōōō95
ƈPlaylist icon ōōōōōōōōō95
ƃSetting up the playback function
using the LCD monitor ōōōōō95
ƈPlay mode ōōōōōōōōō96
ƈSkin of MP3 player ōōōōōō96
ƈPlaying back the slide show ōō97
ƈSetting slide show interval ōōō97
ƈSetting up the recording function in
the MP3 mode ōōōōōōōō97
ƈDelete ōōōōōōōōōōō98
ƈFrame search ōōōōōōōō98
ƈSRS ōōōōōōōōōōōō99
ƈAuto Scroll ōōōōōōōōō99
ƈMP3 BGM Setting ōōōōōō100
ƈLanguage setting ōōōōōō100
ƃWorld Tour Guide ōōōōōō101
ƈDownload the tour guide information ō101
ƈWorld Tour Guide mode ōōō101
ƃImportant notes ōōōōōōō103
ƃWarning indicator ōōōōōō104
ƃBefore contacting a service centreō105
ƃSpecification ōōōōōōōō107
SOFTWARE
ƃSoftware Notes ōōōōōōō110
ƃAbout the software ōōōōōō110
ƃSetting up the application software ō111
ƃStarting PC mode ōōōōōō113
ƃRemovable Disk ōōōōōōō114
ƃRemoving the removable disk ō115
ƃSetting up the USB Driver for MAC ō116
ƃUsing the USB Driver for MAC ō116
ƃRemoving the USB Driver for
Windows 98SE ōōōōōōō116
ƃDigimax Converter ōōōōōō117
ƃDigimax Master ōōōōōōō118
ƃFAQ ōōōōōōōōōōōō121
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region.
To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.
< Included items >
Computer
Camera case
User manual,
Product warranty
DPOF compatible printer
(see p.74)
Touch Pen
Camera strap
Software CD
(see p.110~111)
Earphones
SD memory card / MMC
(see p.10)
AC adapter (SAC-45) /
USB cable (SUC-C2)
PictBridge compatible printer
(see p.77)
AV cable
Rechargeable battery
(SLB-1137C)
External monitor
(see p.87~88)
ŝ5Ş
Identification of features
Front & Top
Power button
Face Recognition (FR) / Lock button
Shutter button
Microphone
Speaker
Flash
Self-timer / AF lamp
Lens
ƈ Self-timer lamp
Icon
ŝ6Ş
Status
Description
Blinking
For the 2 seconds, the lamp blinks quickly at
0.25-second intervals before taking a picture.
Blinking
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Blinking
For the first 8 seconds, the lamp blinks at 1
second intervals.
For the final 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Identification of features
ƈ Camera Status Lamp
Status
Back
Zoom W (Thumbnail) / Zoom T (Digital zoom) / Volume button
LCD monitor
(Touch Screen)
Earphones jack
Camera status lamp
Description
Power on
The lamp turns on and off when the camera is ready to
take a picture
After taking a picture
The lamp blinks while saving the image data and turns off
when the camera is ready to take a picture
When the USB cable is
inserted to a computer
The lamp is on (The lamp will be turned off after
recognising the camera)
Transmitting Data
with a PC
The lamp is off (LCD monitor turns off)
When the USB cable
The lamp turns on
is inserted to a printer
When the printer is
printing
When the AF
activates
The lamp blinks
The lamp turns on
(The camera focus on the subject)
The lamp blinks
(The camera doesn't focus on the subject)
Mode button
Camera strap
Information button
Playback mode / Printer button
ſ Do not rotate the LCD clockwise. It causes LCD breakage. The LCD can be rotated counter-clockwise 180
ŝ7Ş
Identification of features
Connecting to a Power Source
ƈ You should use the rechargeable battery (SLB-1137C) supplied with the
camera. Be sure to charge the battery before using the camera.
Bottom
ƈ SLB-1137C rechargeable battery Specification
Memory card slot
Model
SLB-1137C
Type
Lithium Ion
Capacity
1100mAh
Voltage
3.7V
Charging time
Battery chamber
Battery lock lever
Battery chamber cover
Tripod socket
USB / AV port
(When the camera is turned off)
Approx. 150 MIN
ƈ Number of images and battery life : Using the SLB-1137C
Battery life /
Number of images
Based on the following shooting conditions
Still image
Approx. 110 MIN /
About 220 shots
Using the fully charged battery, Auto mode,
7M image size, Fine image quality, Shot to
shot interval : 30Sec.
Changing the zoom position between Wide
and Tele after every shot. Using the flash on
every second shot.Using the camera for 5
minutes and then Powering it off for 1
minute.
Movie
Approx. 100 MIN
Using the fully charged battery
640X480 image size/ 30fps frame rate
MP3
Approx. 310 MIN
Using the fully charged battery LCD Off.
PMP
Approx. 200 MIN
Using the fully charged battery
Multimedia
ſThese figures are measured under Samsung’s standard conditions and shooting
conditions and may vary depending on the user's methods.
ŝ8Ş
Connecting to a Power Source
INFORMATION
Important information about battery usage.
ƃ When the camera is not used, turn off the camera power.
ƃ Please remove the battery if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside
the camera.
ƃ Low temperatures (below 0˚C) can affect the performance of the battery
and you may experience reduced battery life.
ƃ Batteries will usually recover at normal temperatures.
ƃ During extended use of the camera, the camera body may become warm.
This is perfectly normal.
ƃ When you use earphones, do not remove the battery while the camera is
turning on. It may generate a loud noise.
ƈ You can charge the rechargeable battery (SLB-1137C) by using the SAC-45 KIT
which consists of the AC adapter (SAC-45) and the USB cable (SUC-C2).
When the SAC-45 and SUC-C2 are combined, they can be used as an AC cable.
CAUTION
Important information about USB cable usage.
ƃ Use a USB cable (SUC-C2) with the correct specification.
ƃ If the camera is connected to the PC through a USB hub :
connect the camera directly to the PC.
ƃ If the camera and other devices are connected to the PC at the same time :
remove other device.
ƃ If the USB cable is connected to a port located on the front of the PC :
remove the cable and connect it to a port located on the back of the PC.
ƃ If the USB port of the PC doesn't meet the Power output standard (5V,
500mA), the camera may not be charged.
ƈ How to charge the rechargeable battery (SLB-1137C)
ƃ Using an AC cable
: Connect the AC adapter to the USB cable.
It can be used as a power cable.
Charging LED
ƃ Using a USB cable
: Remove the AC adapter (SAC-45).
You can download stored images to your PC
(p.113) or supply the power to your camera
through the USB cable.
ŝ9Ş
Connecting to a Power Source
CAUTION
ƃ Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
ƃ If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery is
inserted correctly.
ƃ If you charge the battery with the camera power on, the battery can't charge
fully. Turn the camera off while charging the battery.
ƈ Insert the battery as shown
- If the camera does not turn on after you have
inserted battery, please check whether the
battery is inserted with the correct polarity (+ / -).
- When the battery chamber cover is opened, do
not do not force the battery chamber cover.
This may cause damage to it.
ƈ There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
ƈ Charging LED of the AC Adapter
Charging LED
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on
ƃ If you insert the fully discharged battery to charge it, do not turn on the camera at
the same time. The camera may not be turned on because of the low battery
capacity. Charge the battery for more than 10 minutes before using the camera.
ƃ Do not use the flash frequently or take a movie clip with the fully discharged
battery charged for a short time. Even if the charger is inserted, the camera
power may be turned off because the rechargeable battery is discharged again.
ŝ10Ş
Battery status
Low battery
Low battery
Flat battery.
The battery is capacity (Prepare to capacity (Prepare to (Prepare to
recharge or use
recharge or use recharge or use
fully charged
spare battery)
spare battery)
spare battery)
Inserting the memory card
ƈ Insert the memory card as shown.
- Turn off the camera’s power before inserting the
memory card.
- Have the front of the memory card facing
toward the back of the camera (LCD monitor)
and the card pins toward the front of the camera
(Lens).
- Do not insert the memory card the wrong way round.
Doing so may damage the memory card slot.
Instructions on how to use the memory card
ƃ Be sure to format the memory card (see p.88) if you are using a newly
purchased memory card for the first time, if it contains data that the camera
cannot recognise, or if it contains images captured with a different camera.
ƃ Turn off the camera power whenever the memory card is being inserted or
removed.
ƃ Repeated use of the memory card will eventually reduce the memory card’s
performance. Should this be the case, you will need to purchase a new memory
card. Wear and tear of the memory card is not covered by the Samsung
warranty.
ƃ The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
ƃ Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
ƃ Please do not use or store in an environment where there are extremes in
temperature.
ƃ Do not allow the memory card to become dirty or to come into contact with any
liquid. Should this happen, clean the memory card with a soft cloth.
ƃ Please keep the memory card in its case when not in use.
ƃ During and after periods of extended use, you may notice that the memory card
is warm. This is perfectly normal.
ƃ Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this
camera.
ƃ Do not use a memory card formatted by another digital camera or memory card
reader.
ƃ If the memory card is subjected to any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording,
deleting (formatting) or reading.
ƃ Samsung cannot be held responsible for lost data.
ƃ It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
ƃ If there is insufficient memory available
: A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory card.
INFORMATION
ƃ Don't remove the memory card when the camera status lamp is blinking
as this may cause damage to data in the memory card.
ƈ The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards).
Card pins
Write protect
switch
Label
[SD (Secure Digital) memory card]
The SD / SDHC memory card has a write
protect switch that prevents image files
from being deleted or formatted.
By sliding the switch to the bottom of the
SD memory card, the data will be
protected. By sliding the switch to the top
of the SD memory card, the data
protection will be cancelled. Slide the
switch to the top of the SD memory card
before taking a picture.
ŝ11Ş
Instructions on how to use the memory card
ƈ When using a 256MB MMC (Multi Media Card), the specified shooting capacity
will be as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
Recorded
image size
Still
Image
Super Fine
Fine
Normal
63
116
171
74
137
192
89
166
229
88
162
223
131
236
318
381
520
600
30FPS
20FPS
When Using the Camera for the First Time
ƈ When the camera is turned on for the first time, a menu will be displayed to set
date, time and language in the LCD monitor. This menu will not be displayed
again after setting up the date, time and language. Set up the date, time and
language before using this camera.
15FPS
ƃ Turning on the camera
To turn on the camera, press the Power button (‫ )ڹ‬or Open the camera (‫ )ں‬as
shown.
‫ں‬
‫ڹ‬
About 11'
Movie
clip
About 13'
About 21'
About 29'
About 54'
ſ The recording times can be changed by the zoom operation.
The zoom button doesn’t operate during the movie recording.
ŝ12Ş
ſ When you turn on the camera by rotating the LCD monitor, take care not to drop
the camera.
When Using the Camera for the First Time
ƃ Touch Screen Adjustment
1. Select the [CALIBRATION] menu.
2. Press the point with the supplied Touch Pen.
SETUP
INFORMATION
ƃ You can select one of the following 22 languages. :
- English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
Bahasa (Malay / Indonesian), Arabic, Czech, Polish, Hungarian and
Turkish.
ƃ Even if the camera is restarted, the language setting will be maintained.
SETUP / CALIBRATION
CALIBRATION
LANGUAGE
ENGLISH
DATE&TIME
07/02/01
Touch
ſ When you calibrate the LCD monitor, press the Calibration point exactly or
menus on the LCD monitor won't be selected or set.
ƃ Setting up the Date & Time
1. Select the [DATE&TIME] menu
2. Select the desired sub menu by pressing the Ɗƌ icon
ƃ Setting up the language
1. Select the [LANGUAGE] menu
2. Select the desired sub menu by pressing the Ɗƌ icon
SETUP
CALIBRATION
SETUP
ENGLISH
LANGUAGE
ENGLISH
ጥૹ࿴
DATE&TIME
07/02/01
FRANÇAIS
SETUP
SETUP / DATE&TIME
07 / 02 / 01
CALIBRATION
Date
LANGUAGE
ENGLISH
Time
12 : 00
DATE&TIME
07/02/01
Type
yy / mm / dd
OK
DEUTSCH
ŝ13Ş
When Using the Camera for the First Time: Touch Screen
ƈ Touch Screen can be used for selecting the menu or confirming the selected menu. See the following instructions for using the Touch Screen.
To select or set the menu exactly, using the supplied Touch Pen is recommended.
[Pressing the icon]
[Pressing the icon]
[Pressing the Menu icon]
Recording
Size
[Confirming
: Pressing the (
) icon]
ŝ14Ş
[Pressing the sub menu]
Auto Focus
MENU
ƃ Ex : Changing the AF type
Recording
EFFECT
ƃ Ex : Changing the Image Size
Setup 1
Sound
Setup 2
[Confirming the main menu:
Pressing the icon]
Recording
Auto Focus
Center AF
Center AF
Auto Focus
Center AF
Voice Memo
Multi AF
Voice Memo
Voice Record
Voice Record
Sharpness
Normal
Sharpness
Normal
[Confirming
: Pressing the (
) icon]
[Pressing the icon]
[Selecting the sub menu:
Touching the icon]
Starting the recording mode
‫ڹ‬
: Optical / Digital Zoom bar / Digital Zoom rate (p.24)
‫ ں‬00013
: Number of available shots remaining (p.12)
00:00:00
‫ڻ‬
: Available recording time (Movie clip / Voice recording) (p.12)
: Card inserted indicator
(p.10)
‫ڼ‬
: Recording mode (p.16)
‫ڻ‬
‫ں‬
‫ڹ‬
‫ۂ‬
‫ڼ‬
‫ۃ‬
‫ڽ‬
؊
؊
: Face Recognition (p.20)
؉
‫ۀ‬
‫ھ‬
: Self-timer (p.6,26)
‫ڿ‬
: Macro (p.27)
‫ۆ‬
؉؈
‫ۇ‬
؆
؇
‫ہ‬
: Image size (p.30)
‫ۄ‬
: Image quality /
Frame rate (p.31)
‫ۅ‬
: Metering (p.31)
‫ۆ‬
: Continuous shot (p.32)
‫ۇ‬
: ISO(p.32)
: Camera Shake
Reduction (p.34)
؆
LT
: Exposure
compensation (p.34)
؇ 2007/02/01 01:00 PM
: Date/ Time (p.83)
؈
: Camera shake
warning (p.21)
؉
: Auto Focus Frame (p.35)
؊
: Voice memo (p.36)
: Flash (p.28)
MENU
EFFECT
: White Balance (p.33)
؅
؅
‫ہ‬
‫ۀ‬
‫ۃ‬
‫ۅ‬
‫ڿ‬
: Mic. off (p.38)
: Battery (p.10)
‫ۄ‬
‫ھ‬
‫ڽ‬
‫ۂ‬
: Menu / Effect icon (p.35,39)
ŝ15Ş
Starting the recording mode
Selecting modes
Multimedia
ƃ Recording mode
Press the M (Mode) button or Press the
Recording mode icon and the menu will display
as shown.
Resume
MP3
PMP
Multimedia
TextViewer
PMP
TextViewer
Travel Guide
Open
M (Mode)
button
SHOOTING
Program
ASR
SHOOTING
Movie
Auto
ASR
Program
SCENE
ASR
SCENE
Movie
ƈ Mode icons
mode
SCENE
Program
SHOOTING
SHOOTING
SHOOTING
AUTO
PROGRAM
MOVIE
ASR
SCENE
Nightscene
Portrait
Children
NIGHT PORTRAIT CHILDREN LANDSCAPE CLOSE-UP
SCENE
ƈ MP3, PMP, Text Viewer, Tour Guide mode
Select a multi-media mode by rotating the LCD monitor. (p.91)
DAWN
PMP
MUSIC LIST
01-Audio Track 01.mp3
Resume
Open
AUTO : Shutter
ŝ16Ş
02-Audio Track 02.mp3
MULTIMEDIA
BACK
FIRE BEACH SELF
LIGHT WORKS &SNOW SHOT
MP3
TEXT
SUNSET
FOOD
CAFE
TEXT VIEWER World Tour Guide
Starting the recording mode
ƈ How to use the AUTO mode (
)
Please select this mode for quick and easy picture taking with minimal user
interaction.
1. Insert the battery (p.10) taking note of the
correct polarity (+ / -).
2. Insert the memory card (p.10). As this camera
has a 450MB internal memory, it is not
essential to insert the memory card.
If the memory card is not inserted, an image
will be stored in the internal memory.
[AUTO mode]
If the memory card is inserted, an image will be
stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date / time that is displayed on the LCD monitor is incorrect, reset the
date / time before taking a picture.)
5. Select the Auto mode by pressing the Mode button or pressing the mode icon
(p.16, p.25).
6. Point the camera towards the subject and compose the image by using the
LCD monitor.
7. Press the shutter button to capture an image.
ƈ How to use the PROGRAM mode (
)
Selecting the program mode will configure the
camera with optimal settings.
You can still manually configure all functions
except the aperture value and shutter speed.
1. Select the Program mode.
2. Configure advanced functions such as image
size, quality, effects, sharpness and metering.
[PROGRAM mode]
ſ Refer to page 30-48 for more information
about the menus.
INFORMATION
ƃ If the auto focus frame turns to red when you press the shutter button down
half way, it means that the camera cannot focus on the subject. Should this
be the case, the camera is unable to capture an image clearly.
ŝ17Ş
Starting the recording mode
ƈ How to use the ASR (Advanced Shake Reduction) mode (
)
This mode will reduce the effect of camera shake and help you get a wellexposed image in dim conditions. Press the ASR icon.
ƃ Things to watch out for using the ASR mode
1. The digital zoom will not operate in the ASR
mode.
2. If the lighting conditions are brighter than
fluorescent lighting condition, the ASR doesn’t
activate.
3. If the lighting condition is darker than in
fluorescent lighting condition, camera shake
[ASR mode]
warning indicator (
) will appear.
For best results only take pictures in situations
where the camera shake warning indicator (
) is not displayed.
4. If the subject is moving the final image captured may be blurred.
5. Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
6. As the ASR uses the camera’s digital processor, images taken using the ASR
may take a little longer for the camera to process.
ƈ Wise Shot
Two images are taken at a time. One is taken in the Fill-In Flash mode and the
other is taken in the ASR mode. You can select and save only one of the images.
ƃ How to use the Wise Shot
1. Select the ASR mode.
2. Press the continuous shot icon.
3. Press the
>
icon and the wise shot is selected.
4. Press the Shutter button to capture images
- Two images are captured in succession.
DRIVE
INFORMATION
ƃ In the Wise shot mode, the shutter speed value shown on the LCD monitor
may be different to the actual shutter speed.
ŝ18Ş
Starting the recording mode
ƈ How to use the MOVIE CLIP mode (
)
A movie clip can be recorded for as long as the
available recording time of the memory capacity
allows (Max. 2 Hour).
1. Select the MOVIE CLIP mode.
(Available recording time will display on the
Standby
LCD monitor)
[MOVIE
CLIP mode]
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
Press the shutter button and movie clips are recorded for as long as the
available recording time allows.
Movie clips will still be recorded if the shutter button is released.
If you wish to stop recording, press the shutter button again.
* Image size and type are listed below.
- Image size
: 800x592, 640x480, 320x240(Selectable)
- File type
: *.avi (MPEG-4)
ſ You can record the movie without voice. (p.38)
ſ When the 800x592 image size is selected, you can select 20 fps, and when
the 640x480, 320x240 image sizes are selected, you can select 30 fps and
15 fps.
ƈ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite scenes
into a movie clip without having to create multiple movie clips.
ƃ Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording
time. Movie clips will still be recorded if the shutter
button is released.
2. Press the Pause icon to pause recording. Press
the Pause icon again to resume the recording.
3. If you wish to stop recording, press the shutter
button again.
00:00:35
Stop : Shutter
ƈ How to use the SCENE mode (
)
Use the menu to easily configure optimal settings for a variety of shooting
situations.
1. Select the Scene mode.
SHOOTING
SCENE
Nightscene
Portrait
Children
[SCENE mode]
ŝ19Ş
Starting the recording mode
ſ The scene modes are listed below.
[Nightscene]
(
[Portrait]
[Children]
(
(
[Landscape]
[Close up]
(
(
[Text]
[Sunset]
[Dawn]
[Backlight]
(
(
(
(
[Firework]
[Beach&Snow]
[Self Shot]
(
(
(
[Food]
[Café]
(
(
) : Use this for shooting still images at night or in
other dark conditions.
) : To take a picture of a person.
) : To take a picture of fast moving objects, for
example, children.
) : To take pictures of distant scenery.
) : Close-up shooting for small objects such as
plants and insects.
) : Use this mode to shoot a document.
) : For taking pictures of sunsets.
) : Daybreak scenes.
) : For portraits without shadows caused by
backlighting.
) : Firework scenes.
) : For ocean, lake, beach and snowscape scenes.
) : Use when the photographer would also like to be
in the image.
) : For taking delicious looking food.
) : For taking pictures in cafe and restaurant.
ƈ Face recognition
This mode detects the face position of the subject automatically and then sets
the focus and exposure. Select this mode for quick and easy pictures of people.
Selectable modes : Auto, Program, ASR, Portrait, Children, Beach&Snow, Self
shot, Cafe mode.
1. Press the FR (Face Recognition) button (
) in the selectable modes.
The FR icon will be displayed on the screen left top side.
2. The size and position of the auto focus frame is set at the face of the subject
automatically.
3. Press the shutter button halfway. The focus frame turns to green when the
focus is activated.
4. Press the shutter button fully to take a picture.
ŝ20Ş
Starting the recording mode
INFORMATION
ƃ This function can detect up to 9 persons.
ƃ When the camera recognises many people at the same time, it will focus on
the nearest person.
ƃ When Face detection begins, the Digital Zoom cannot operate.
ƃ When Face detection begins, the Effect mode cannot operate.
ƃ The face in focus will be highlighted in green; other faces (up to 8) in the
picture will be shown in gray. (Total 9)
ƃ Return to previous AF mode if face recognition was failure.
ƃ In some conditions this function cannot work properly
- When a person wears dark glasses or when some part of the face is
hidden
- When the person being taken does not look at the camera
ƃ The maximum available Face Recognition range is 2.6m (Wide).
ƃ The nearer the subject, the faster the camera can recognize the subject.
Things to watch out for when taking pictures
ƈ Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
[Lightly press the shutter button]
[Press the shutter button]
ƈ The available recording time may vary depending on shooting conditions and
camera settings.
ƈ When the Flash Off or Slow synchro mode is selected in a low lighting condition,
the camera shake warning indicator (
) may appear on the LCD monitor.
In this case, use a tripod, support the camera on a solid surface or change to
flash shot mode.
ƈ Shooting against the light :
Do not take pictures into the sun. Taking a picture against the sun may make the
picture dark. To take a picture against the sun, please use the [Backlight] in the
scene shooting mode (see page 20), fill-in flash (see page 29), spot metering
(see page 31), or exposure compensation (see page 34).
ŝ21Ş
Things to watch out for when taking pictures
ƈ Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
Focus lock
ƈ To focus on a subject not positioned in the centre of the picture, use the focus
lock function.
ƃ Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus frame lights
up, it means the camera is focused on the subject. Be careful not to press the
SHUTTER button all the way down to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera
to recompose your picture as desired, and then press the SHUTTER button
completely to take the picture. If you release your finger from the SHUTTER
button, the focus lock function will be cancelled.
[The image to be captured]
ŝ22Ş
[Press the SHUTTER
button halfway and focus
on the subject]
[Recompose the picture
and fully press the
SHUTTER button]
Using the camera buttons to set the camera
ƈ The recording mode function can be set up by using the camera buttons.
POWER button
ƃ Used for turning the camera’s power on / off.
ƃ If there is no operation during the specified time,
the camera's power will be turned off automatically
to save battery life.
Refer to page 86 for more information about the
auto power off function.
FR (Face Recognition) / Lock button
ƈ This button is for quick and easy pictures of
people.
ƈ In MP3 and PMP mode, this button will lock the
camera buttons.
SHUTTER button
ƃ Used for taking an image or recording voice in
the RECORDING mode.
ƃ In MOVIE CLIP mode :
Pressing the shutter button down fully starts the
process for recording a movie clip.
Press the shutter button once and the movie clip
is recorded for as long as the available recording time in the memory allows.
If you wish to stop recording, press the shutter button again.
ƃ In STILL IMAGE mode :
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and stores
the image. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
ŝ23Ş
ZOOM W / T button
ƃ This camera has a 3X optical zoom and a 5X
digital zoom function.
Using both will offer a total zoom ratio of 15X.
ƃ TELE Zoom
Optical zoom TELE
Digital zoom TELE
ƃ WIDE Zoom
Optical zoom WIDE
: Pressing the ZOOM T button. This will zoom into the
subject i.e. the subject will appear nearer.
: When the maximum (3X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
[TELE zoom]
Optical zoom
Digital zoom
[WIDE zoom]
[TELE zoom]
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[Optical zoom 2X]
Digital zoom WIDE
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
: Pressing the ZOOM W button. This will zoom out from
the subject i.e. the subject will appear farther away.
Pressing the ZOOM W button continuously will set the
camera to its minimum zoom setting i.e. the subject
appears at its farthest from the camera.
: When the digital zoom is in operation, pressing the
ZOOM W button will reduce the digital zooming in
steps. Releasing ZOOM W button stops digital
zooming. Pressing the ZOOM W button will reduce
the digital zoom and then it will continue to reduce the
optical zoom until the minimum setting is reached.
[Digital zoom 5X]
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[Digital zoom 5X]
ŝ24Ş
[WIDE zoom]
[TELE zoom]
[WIDE zoom]
ZOOM W / T button
INFORMATION
ƃ Images taken using the digital zoom may take a little longer for the camera
to process. Allow time for this to take place.
ƃ You may notice a decrease in image quality when using the digital zoom.
ƃ To view a clearer digital zoom image, press the shutter button halfway at the
maximum optical zoom position and press the zoom T button again.
ƃ The digital zoom can't be activated in the [Nightscene], [Children], [Text],
[Close up], [Fireworks], [Self Shot], [Food], [Café] scene modes, the Movie
clip mode, the ASR (Wise shot) mode and the [High light], [Photo Frame],
[Composite] effect.
ƃ Take care not to touch the lens as this may cause a camera malfunction.
Mode button
ƈ You can select the desired working mode using
the M(Mode) button located on the back of the
camera.
Info (
) button
ƈ In the recording modes or playback mode, pressing
this button will display the image information.
Info (
) button
ŝ25Ş
Setting up the camera mode
ƈ You can set up the camera mode by pressing the mode icon. In Night scene
mode, you can select the shutter speed and aperture value.
Main menu
Sub menu
Self-timer (
)
ƈ Images can be taken after pre-set interval with this menu. Select a desired selftimer icon on the LCD monitor. (p.6)
Available mode
ƃ Selecting the 2 SEC self-timer
Self-timer
Macro
TIMER
Flash
Image Size
Quality
Metering
INFORMATION
Drive mode
ISO
White Balance
Exposure Compensation
LT
LT
Camera Shake Compensation
ſIn ASR mode, ISO is fixed to AUTO and EV is fixed to 0.0EV.
ſDepending on the recording mode, the selectable sub menus can be varied.
ſTo maintain the characteristics of each scene modes, some menus appear but
can't be selected.
ŝ26Ş
ƃ In Movie Clip mode, only the 10SEC self-timer will work.
ƃ When you select 2SEC self-timer with flash, the delay (2 second) can be
extended according to the flash charging status.
ƃ If you operate the Shutter button during the self-timer operation, the selftimer function is cancelled.
ƃ Use a tripod to prevent camera shake.
Macro (
)
ƈ You can take macro pictures. Select a desired
macro icon on the LCD monitor.
ƈ Types of focus modes and focus ranges (W : Wide, T : Tele)
Mode
Focus Type
Super macro (
)
(Unit : cm)
Auto (
)
Auto macro (
)
Normal
W : 5 ~ Infinity
T : 40 ~ Infinity
W : 80 ~ Infinity
T : 80 ~ Infinity
FOCUS
W:1~5
(Wide only)
Focus range
Mode
Focus Type
Super macro (
[Auto Focus-AF icon]
[Auto Macro (
)]
Super macro (
Focus range
-
Program (
Macro (
)
)
Normal
W : 5~80
T : 40~80
W : 1~5
(Wide only)
Focus range
Mode
Focus Type
)
)
W : 80 ~ Infinity
T : 80 ~ Infinity
ASR mode (
)
Auto macro (
)
W : 5 ~ Infinity
T : 40 ~ Infinity
Normal
W : 80 ~ Infinity
T : 80 ~ Infinity
INFORMATION
[Macro (
)]
[Super Macro (
)]
ƃ When the macro mode is selected, be particularly careful to avoid camera
shake.
ƃ When you take a picture within 30cm (Wide zoom) or 50cm (Tele zoom) in
the Macro mode, select the FLASH OFF mode.
ƃ When you take a picture within the 5cm Super macro range, the auto-focus
on the camera will take longer to set the correct focus distance.
ŝ27Ş
Macro (
)
Flash (
ƈ Available focusing method, by recording mode
(ƃ: Selectable, ū: Infinity focus range)
Mode
Auto macro
Super macro
Macro
ƃ
ƃ
ƃ
ƈ You can select a proper flash mode in accordance
with the enviroment. Select a desired flash icon on
the LCD monitor.
Normal
ƃ
FLASH
ƃ
ƃ
ƃ
ƃ
Mode
)
ƃ
ƃ
SCENE
Auto macro
Super macro
Macro
Normal
ƃ
ƃ
[Selecting the Auto flash]
ƃ
ū
ƃ
ƃ Flash range
ƃ
ū
ISO
ū
ƃ
ū
ƃ
ƃ
ƃ
ƃ
ŝ28Ş
AUTO
(Unit : m)
Normal
Auto macro
Macro
WIDE
TELE
WIDE
TELE
WIDE
TELE
0.8 ~ 3.8
0.8 ~ 2.8
0.3 ~ 0.8
0.5 ~ 0.8
0.3 ~ 3.8
0.5 ~ 2.8
ſ When the Super Macro is selected, flash is fixed as the Flash Off mode.
Flash (
)
INFORMATION
ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow synchro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move the camera until the second flash fires.
ƃ Using the flash frequently will reduce the life of the battery.
ƃ Under normal operating conditions the re-charging time for the flash is
usually within 5.5 seconds. If the battery is weak, the charging time will be
longer.
ƃ In the ASR mode, [Landscape], [Close up], [Text], [Sunset], [Dawn],
[Firework], [Self Shot], [Food], [Café] scene modes and the Movie clip
mode, the flash function will not operate.
ƃ The image quality is not guaranteed if the subject is too close or highly
reflective.
ƃ When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the the flash
light reflecting off atmospheric dust.
ƃ Flash mode indicator
Icon
Flash mode
Description
Auto flash
If the subject or background is dark, the camera
flash will operate automatically.
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash
will work automatically and will reduce the red-eye
effect by using the red-eye reduction function.
Fill in flash
The flash fires regardless of the available light.
The intensity of the flash will be automatically
controlled to suit the prevailing conditions.
Slow synchro
The flash operates with a slow shutter speed to
obtain a balanced correct exposure. In poor lighting
conditions the camera shake warning indicator
(
) will display on the LCD monitor.
Flash off
The flash does not fire. Select this mode when
capturing images in a place or situation where flash
photography is prohibited. When you capture an
image in a poorly lit condition, the camera shake
warning indicator (
) will display on the LCD
monitor.
Red-eye
reduction
When a shot with "red eye" is detected, this mode
will reduce the red-eye effect automatically.
ŝ29Ş
Flash (
)
Image Size
ƃ Available flash mode, by recording mode
(ƃ : Selectable)
ƈ You can select the image size appropriate for your application.
Image Size
ƃ
ƃ
ƃ
ƃ
3072x2304
ƃ
ƃ
ƃ
ƃ
3072x2048
ƃ
3072x1728
Still Image
ƃ
2592x1944
ƃ
ƃ
ƃ
ƃ
2048x1536
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
1024x768
800x592
640x480
Movie Clip
320x240
ƃ
ƃ
ƃ
ƃ
SIZE
SIZE
ƃ
ƃ
ƃ
[STILL IMAGE mode]
[MOVIE CLIP mode]
ƃ
ƃ
ƃ
ƃ
ŝ30Ş
INFORMATION
ƃ The higher the resolution, the lower the number of shots available because
high resolution images require more memory.
Quality / Frame rate
Metering
ƈ You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture
quality.
ƈ If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
- Multi
Mode
STILL IMAGE mode
MOVIE CLIP mode
Icon
Sub menu Super Fine
Fine
Normal
File Format
jpeg
jpeg
jpeg
QUALITY
[STILL IMAGE mode]
30FPS 20FPS 15FPS
avi
avi
avi
FRAME RATE
[MOVIE CLIP mode]
: Exposure will be calculated based on
an average of the available light in the
METERING
image area. However, the calculation
will be biased towards the centre of the
image area. This is suitable for general
use.
- Spot : Only the rectangular area in the centre
of the LCD monitor will be metered for light. This is suitable when the
subject in the centre is exposed correctly, regardless of the back
lighting.
- Center : Exposure will be calculated based on an average of the available light
in the image area. However, the calculation will be biased towards the
centre of the image area. This is suitable for taking a picture of small
object like a flower or insects.
ſ If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.
INFORMATION
ƃ This file format complies with the DCF (Design rule for Camera File
system).
ƃ When the 800x592 image size is selected, you can select 20 fps, and when
the 640x480, 320x240 image sizes are selected, you can select 30 fps and
15 fps.
ŝ31Ş
Continuous shot
ƈ You can select the drive mode like continuous shot, motion capture, AEB and
wise shot.
- Single
- Continuous
: Take one picture only
: Images will be taken
DRIVE
continuously until the shutter
button is released. The
shooting capacity depends on
the memory.
- Motion Capture : This takes 6 shots per second,
when the shutter is pressed
and held down. After completing the continuous shooting,
images are saved. The number of images per shots are 30
and the image size is fixed as 640X480.
- AEB
: Take three pictures in a series in different exposures:
standard exposure (0.0EV), short exposure (-0.5EV) and
over exposure (+0.5EV). Use the mode if it is hard to decide
exposure of the object.
- Wise shot
: Two images are taken at a time. One is taken in the Fill-In
Flash mode and the other is taken in the ASR mode. (p.18)
ſ High resolution and picture quality increases file saving time, which increases
stand-by time.
ſ If the [Continuous], [Motion Capture] or [AEB] sub menu is selected, the flash
will be off automatically.
ſ If less than 3 pictures are available in the memory, the AEB shooting is not
available.
ſ If less than 30 pictures are available in the memory, the motion capture is not
available.
ſ It is best to use a tripod for the AEB shooting as the time to save each image
file is longer and blurring caused by camera shake may occur.
ſ The voice memo can't be added on the images taken with the [Continuous],
[AEB] and [Wise Shot] menu.
ŝ32Ş
ISO
ƈ You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
- Auto : The camera's sensitivity is automatically
changed by variables such as lighting
value or subject brightness.
ISO
- 80, 100, 200, 400, 800, 1600
: The higher the ISO value, the higher the
camera’s sensitivity to light and therefore the
greater its capacity to take pictures in darker
conditions. However, the noise level in the image will increase as the ISO
value increases, making the image appear coarser.
White balance
ƈ The white balance control allows you to adjust the colours to appear more
natural.
Auto WB
: The camera automatically
selects the appropriate white
balance settings, depending
WHITE BALANCE
on the prevailing lighting
conditions.
Daylight
: For taking images outside.
Cloudy
: For taking images under a
cloudy and overcast sky.
Fluorescent_H
: For shooting under daylight fluorescent types of three-way
fluorescent lighting.
Fluorescent_L
: Shooting under white fluorescent lighting.
Tungsten
: For shooting under tungsten (standard light bulb) lighting.
Custom Set
: Allows the user to set the white balance according to the
shooting condition.
Different lighting conditions may cause a colour cast on your images.
ƃ Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for a
given shooting environment by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the
White Balance.
2. Place a sheet of white paper in front of the
camera so that the LCD monitor shows only
white, and then press the SHUTTER button.
ٌ
3. Your custom white balance value is stored.
[White paper]
- The custom white balance value will be
applied, starting with the next picture you
take.
- The user configured white balance will be remain effective until it is
overwritten.
ŝ33Ş
Exposure compensation
Movie Clip frame stabiliser
ƈ This camera automatically adjusts the exposure
according to the ambient lighting conditions. You
can change the exposure value by using the ȜȞ
icon. A negative exposure compensation value
reduces the exposure.
Note that a positive exposure compensation
value increases the exposure and the LCD
monitor will appear white or you may not get
good pictures.
ƈ This function helps stabilize images captured during movie recording. You can
select this menu only in the MOVIE CLIP mode. If the memory card is not
inserted, this function will not operate.
EXPOSURE VALUE
: Movie clip frame stabilizer function is
disabled.
: Prevents camera shake during movie
recording. The recording frame range will
become narrower than when you select
the
menu.
Standby
[MOVIE CLIP mode]
ƃ Long Time shutter : This camera automatically adjusts the shutter speed and
aperture values to the shooting environment. However, in
NIGHT SCENE mode, you can set the shutter speed and
aperture values to your preference.
1. Select the [Nightscene] scene mode. (p.20)
2. Press the LT icon and Long Time shutter
menu will be displayed.
3. Configure the Long Time shutter value with the
icon.
4. Press the
icon. The value you set will be
saved and the mode will switch to NIGHT
SCENE mode.
LONG TIME SHUTTER
Wide : Auto, F3.5 ~ 6.3 : Aperture Value
Tele : Auto, F4.5 ~ 8.0
AUTO, 1 ~ 16S : Shutter Speed
ŝ34Ş
Auto
Auto
STABILIZER
Using the LCD monitor to adjust the camera settings
ƈ You can use the menu on the LCD monitor to set up recording functions.
ƈ The items indicated by
ƈ You can select your preferred Auto Focus type according to the shooting condition.
are default settings.
Available mode
Auto Focus
Center AF
Multi AF
Voice Memo
Off
On
Voice Record
-
-
Soft+
Soft
Sharpness
Normal
Vivid
Vivid+
-
High
Normal
Low
-
Off
On
Page
p.35
p.36
Contrast
Voice Mute
ſ Menus are subject to change without prior notice.
Recording
Auto Focus
MENU
Sub menu
Recording
Sound
Auto Focus
Center AF
Center AF
EFFECT
Menu
Auto Focus type
Setup 1
Voice Memo
Multi AF
Setup 2
Voice Record
Sharpness
Normal
- [Center AF] : The rectangular area in the center of the LCD monitor will be
focused
- [Multi AF] : This camera selects an AF point from the 5 AF points.
p.37
p.38
p.38
[Center AF]
[Multi AF]
ſ When the camera focuses on the subject, the auto focus frame turns to green.
When the camera doesn't focus on the subject, the auto focus frame turns to red.
ŝ35Ş
Voice Memo
Voice Recording
ƈ You can add your voice-over to a stored still image.
Recording
ƈ A voice can be recorded for as long as the available recording time
(max:10 hour) allows.
Voice Memo
Auto Focus
Center AF
Off
Recording
Voice Memo
On
Auto Focus
Center AF
Voice Memo
Voice Record
Sharpness
Normal
Voice Record
Sharpness
Normal
- If the voice memo indicator is displayed on the
LCD monitor, the setting is completed.
Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded for as long as the available
recording time (max:10 hour) allows. The recording time will be displayed on
the LCD monitor. Voice will still be recorded if the shutter button is released.
- If you wish to stop recording, press the shutter button again.
- File type : *.wav
- Press the shutter button and take a picture.
The picture is stored on the memory card.
- Voice memo will be recorded for ten seconds
from the moment the picture is stored.
In the middle of the sound recording, pressing the
shutter button will stop the voice memo.
Stop : Shutter
ŝ36Ş
00:00:00
Start : Shutter
Voice Recording
Sharpness
ƃ Pausing while recording a voice
Using this function, you can record your favorite
voice clips into a voice recording file without
having to create multiple voice recording files.
1. Press the Pause icon (
) to pause
recording.
2. Press the Pause icon (
) again to resume
the recording.
3. If you wish to stop recording, press the shutter
button again.
ƈ You can adjust the sharpness of the picture you are about to take. You cannot
check the sharpness effect on the LCD monitor before you take a picture,
because this function is applied only when the captured image is stored on the
memory.
00:01:34
Recording
Auto Focus
Center AF
[Pausing the voice recording]
ƃ A distance of 40cm between you and the camera (microphone) is the best
distance to record sound.
ƃ If the camera power is turned off while the voice recording is paused, the
voice recording is cancelled.
Icon
Soft+
Voice Memo
Soft
Voice Record
Normal
Sharpness
Normal
INFORMATION
Sharpness
Vivid
Menu
Description
Soft+
The edges of the image are softened. This effect is
suitable for editing images on your PC.
Soft
Normal
Vivid
Vivid+
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized.
The edges will appear sharp, but noise may occur
in the recorded image.
ŝ37Ş
Contrast
Recording the movie clip without voice
ƈ You can set the difference between the bright part of the image and the dark part of
the image.
ƈ You can record the movie without voice.
Recording
Recording
Contrast
Normal
Contrast
Voice Mute
Voice Mute
Off
Off
High
On
Normal
Low
- High : The difference between bright part of the image is high.
- Normal : The difference between bright part of the image is normal.
- Low
: The difference between bright part of the image is low.
Select [Voice Mute] menu in the Movie clip mode.
(
) icon will display on the LCD monitor.
Press the Shutter button and a movie will record for
as long as the memory capacity allows without
voice.
Standby
[Movie clip mode]
ŝ38Ş
MENU
ƈ It is possible to add special effects to your images
by using this icon.
ƈ Still image mode : You can select the colour,
special colour, image editing
and Fun menu.
Color Effect
EFFECT
Effect
Fun
ƃ This button will not operate in ASR, Voice recording mode and some scene
modes (Night, Text, Sunset, Dawn, Backligh, Fireworks, Beach&Snow).
ƃ To cancel the special effect, select
sub menu in the Colour menu and
select the
sub menu in the rest effect menus.
ƃ The voice memo can't be added on the still image that has the FUN effect.
[Still image mode]
ƈ Movie clip mode : You can select the colour menu.
ƈ Available Effects, by recording mode
ƃ
INFORMATION
Image Adjust
(ƃ: Selectable)
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ŝ39Ş
Effect : Colour Effect
ƈ By using the camera's digital processor, it is possible to add special effects to
your images
Custom colour
ƈ You can change the R (Red), G (Green) and B
(Blue) values of the image.
Colour
Color Effect
Off
Color
Normal
ƃ Press the Effect menu in an available recording mode (p.39)
Custom Color
-
Color Effect
Color Effect/Color
: Selects R, G, B
ȜȞ
Color Mask
: Changes the values
Color Effect/Custom Color
Off
Color
Normal
Custom Color
Color Mask
OK
Select a desired sub menu by pressing the ȜȞ icon and press the OK icon.
: No effect is added to the image.
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Captured images will be stored in a blue tone.
: Save the image in negative mode.
ŝ40Ş
OK
Effect : Colour Effect
Colour mask
ƈ With this menu, you can select a part you want to highlight. The rest of the image will be black & white.
ƃ Press the Effect menu in an available recording mode. (p.39)
Color Effect
Color Effect/Color Mask
Color Effect/Color Mask
Off
Color
Normal
Custom Color
Press the OK icon and the Mask mark will
display on the LCD monitor
+, - icon: Changing the Mask size
OK
Color Mask
OK
Pressing the + icon : Move the
mask to the + position
Color Effect/Color Mask
Press the Shutter button and the mask
added image is taken
[Final image]
Pressing the OK icon
Edit
OK
[Mask added image]
You can change the size and position with
the Edit icon
ŝ41Ş
Effect : Image editing
Saturation
ƈ You can change the saturation of the image.
ƃ Press the Effect menu in an available recording mode (p.39).
Image Adjust
Image Adjust / Saturation
Image Adjust / Saturation
Off
Saturation
Select Saturation menu
(
) and a bar for changing
the saturation will display.
Change the saturation by
pressing the ȜȞ icon.
Save
Save
+ direction : High saturation
(The colour will be deep)
- direction : Low saturation
(The colur will be subtle)
Image Adjust
Off
Saturation
ŝ42Ş
Press the SAVE icon and the settings
are saved
Effect : FUN
Cartoon
ƈ Press the Effect menu in an available recording mode (p.39). If the
The size of Cartoon image is fixed to 1M.
,
image size are selected, the FUN menu cannot be selected.
FUN / Cartoon 2
FUN / Cartoon
FUN
Cartoon
Off
Photo Frame
Off
Select (
High Light
Off
Select a desired frame by pressing
the ȜȞ icon
)
Composite
Off
OK
Off
Pressing the OK icon
Press the LCD monitor
Set
Changing the text box location:
Pressing the ȜȞ icon
ſ You can delete the capture
image and take an image again.
Select a deleted image and press
the
icon.
Pressing the Shutter button
ſYou can change the frame by pressing
Taking the first image
the
icon.
Pressing the Set icon
Pressing the Shutter button
Press the SAVE icon and the image is saved.
Save
Taking the second image
ſ Before saving the image, you can change
the position of the text box.
The final image
ŝ43Ş
Effect : FUN
Photo Frame
ƈ You can add 9 types of frame-like borders to a still image you want to capture.
ƈ Date & Time information will not be printed on the stored image taken with Photo
Frame menu.
ƃ Press the Effect menu in an available recording mode (p.39).
FUN
FUN / Photo Frame
Cartoon
Off
Photo Frame
Off
High Light
Off
Composite
Off
Off
ȜȞ : Selecting a frame
FUN / Photo Frame 1
Pressing the
OK icon
OK
ŝ44Ş
- The selected photo frame will display. Press the shutter button to take a
picture.
- Press the
icon when you want to change the frame.
: Cancels the frame effect
Effect : FUN
Preset focus frames
ƈYou can make the subject stand out from its surroundings. The subject will be
sharp and in focus while making the rest out of focus.
ƃ Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
ƃ Press the Effect menu in an available recording mode.(p.39)
FUN / High Light 1
FUN
FUN / High Light 1
FUN / High Light
Cartoon
Off
Photo Frame
Off
High Light
Off
OK
Composite
Off
Select a desired range
of preset focus frame on
the LCD monitor.
After changing the range
Select a proper menu by pressing ȜȞ icon and press the OK icon.
FUN / High Light 1
OK
Off
FUN / High Light 2
FUN / High Light 3
Pressing the OK icon
FUN / High Light 4
OK
OK
OK
OK
[Range 1]
[Range 2]
[Range 3]
[Range 4]
The preset focus frame will appear.
Press the shutter button to capture an image.
Pressing the Shutter
button
Final image
Compose the image by using
the LCD monitor
ŝ45Ş
Effect : FUN
ſ Selecting 2 composite shots.
Composite shooting
ƈ You can combine 2 - 4 different shots in a still image.
ƃ Press the Effect menu in an available recording mode (p.39)
FUN
Pressing the
shutter button
Fun / Composite
Cartoon
Off
Photo Frame
Off
[Ready for taking]
High Light
Off
Composite
Off
[First shot]
Off
Pressing the shutter
button
Select a desired menu by pressing ȜȞ icon and press the OK icon.
-
: Cancels the composite shooting
: 2 different shots are combined in a still image.
: 3 different shots are combined in a still image.
: 4 different shots are combined in a still image.
: 2 different panorama shots are combined in a still image.
After selecting a desired menu, press the shutter button to take a picture.
ŝ46Ş
Pressing the
SAVE icon
Save
[The final picture]
[Second shot]
Effect : FUN
INFORMATION
ƃ You can use the Zoom W / T button during the composite shooting.
ƃ If you press the Play mode or Mode button during the
composite shots, each camera working mode is executed. The images
captured before will be deleted.
ƃ Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
1. During the composite shots, press the
icon.
2. A previous image will be deleted and new frame will appear. If there is an
image taken before, press the
icon again and a previous image will be
deleted again.
Pressing (
[Before taking the 3rd shot]
)
[Moving backward to the 2nd
shot]
3. Press the shutter button to capture a new image.
ŝ47Ş
Effect : FUN
ƃ Changing a part of composite shot after taking the last shot
1. After taking the last shot, a cursor to select a frame will display. Press a
desired frame on the LCD monitor to take an image again.
2. Press the
icon. The image is deleted and you can take an image again
3. Press the Shutter button. If you want to change the images, use the LCD
monitor and
icon.
4. Press the SAVE icon to save the image.
Save
Press the frame you want
to take again on the LCD
monitor
[After taking 4th shot]
Save
[Moving backward to the 2nd
shot]
Pressing the
icon
Pressing the
Shutter button
[Deleting 2nd shot]
Pressing the SAVE
icon
Save
[Taking 2nd shot again]
ŝ48Ş
[Final Image]
Starting play mode
ƈ Turn the camera on and select Play mode by pressing the play mode button
(
). The camera can now play back the images stored in the memory.
ƈ If the memory card is inserted in the camera, all the camera functions apply only
to the memory card.
ƈ If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.
ƃ Playing back a still image
1. Select the PLAY mode by pressing the
play mode button (
).
ƃ Playing back a movie clip
1. Select the recorded movie clip that you want to
play back by using the ȜȞicon.
2. Press the Ȟ icon to play back a movie clip file.
- To pause a movie clip file while playing it
back, press the
icon.
- To restart the movie, press the Ȟ icon.
- To rewind the movie clip while it is playing,
press the ȜȜ icon. To fast forward the movie
clip, press the ȞȞ icon.
- To stop playback of the movie clip, press the
icon.
[Movie clip mode]
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to view by
pressing the ȜȞ icon.
ſ Press and hold the Ȝ or Ȟ icon to play back
the images quickly.
ŝ49Ş
Starting play mode
ƈ Movie clip capture function : capture still images from the movie clip.
ƃ How to capture the movie clip
1. Press the pause icon and the shutter button
while playing the movie clip.
2. The paused movie clip is saved in a new file
name.
ƃ If the running time is under 10 seconds, the movie clip can’t be trimmed.
Capture: Shutter
ſ The captured movie clip file has same size as
the original movie clip (800X592, 640X480,
320X240).
ƈ On camera movie trimming : You can extract desired frames of movie clip during
the movie clip play back.
[Paused]
1. Press the Pause icon at the point of the movie clip
that you want to start extracting.
2. Press the T button.
3. Press the Ȟ icon and the extracted range will be
displayed on the status bar.
4. Press the pause icon once more at the point
where you wish the extracted file to stop.
5. Press the T button and a confirmation window will
display.
6. Select a desired sub menu.
[No] : The movie trimming will be cancelled.
[Yes] : The extracted frames are saved as a new
file name.
Capture: Shutter / Trim: T
Trim: T
Trimming?
No
Yes
ŝ50Ş
Starting play mode
INFORMATION
ƃ When a voice is playing back, you can use the earphones.
ƃ If you want to extract the movie clip at the beginning of the frame, press the
Zoom T button before starting the movie clip.
ƃ If the time line bar passes by the start point by pressing the REW (ȜȜ )
icon, the first frame of the movie clip will display.
ƃ If you don't specify the ending point of the movie clip, the trimming
confirmation window will be displayed at the point of the last frame.
ƃ Playing back a voice memo
1. Select the recorded voice that you want to play
back.
2. Press the Ȟ icon to play back a recorded voice
file.
- To pause a recorded voice file, while playing it
back, press
icon.
- To resume playback of the voice file, press
the Ȟ icon.
- To stop playback of the voice file, press the
icon.
ƃ Playing back a recorded voice
1. Select the recorded voice that you want to play
back by using the Ȝ / Ȟ icon.
2. Press the Ȟ icon to play back a recorded voice
file.
- To pause a recorded voice file, while playing it
back, press the pause icon again.
- To resume playback of the voice file, press the
play icon.
- To rewind the voice file while it is playing, press
the ȜȜ icon. To fast forward the voice file,
press the ȞȞicon.
- To stop playback of the voice file, press the
icon.
- When a voice is playing back, you can use the earphones.
ŝ51Ş
LCD monitor Indicator
ƈ The LCD monitor displays shooting information about the displayed image.
No.
‫ڼ‬
‫ڻ‬
3
Memory card indicator
p.10
4
Playback mode
p.49
5
Protect
p.73
6
Movie Clip / Voice Memo
p.49, 51
7
Previous / Next image
p.49
8
DPOF
p.74
؆
9
Menu / Effect
؅
10
ISO
AUTO ~ 1600
p.32
11
Aperture value
F 3.5 ~ F 8.0
p.34
12
Shutter speed
16 ~ 1/2,000
p.34
13
Flash
On/Off
p.28
14
Image size
3072X2304 ~ 256x192
p.30
15
Recording date
2007/02/01
p.83
16
Delete
p.56
17
Playing back the voice memo /
voice recording / movie file
p.49~51
‫ھ‬
‫ۀ‬
‫ہ‬
ŝ52Ş
p.10
Folder name & File name
‫ڽ‬
‫ۂ‬
‫ۃ‬
‫ۄ‬
‫ۅ‬
‫ۆ‬
‫ۇ‬
Page
2
‫ں‬
ISO : 100
AV : F3.5
TV :1/45
Flash :Off
3072x2304
2007/02/01
Icon
Battery
‫ڹ‬
‫ڿ‬
Description
1
100-0060
p.82
p.56, 69
Using the camera buttons to adjust the camera
ƈ In Play mode, you can use the buttons on the camera to conveniently set up the
Play mode functions.
Play mode button
ƈ If you have turned on the camera by pressing
the POWER button, you can press the PLAY
MODE button once to switch to Play mode and
press it again to switch to Recording mode.
Thumbnail (
) / Enlargement (
) button / Volume button ( )
ƈ You can view multiple pictures, enlarge a selected picture, and crop and save a
selected area of an image.
ƈ In the MP3, PMP and Text Viewer mode, you can control the volume of multimedia files.
ƃ Thumbnail display
1. While an image is displayed full screen, press
the thumbnail button.
2. The thumbnail display will highlight the image
that had been showing at the time the thumbnail
mode was selected.
3. Select a desired image.
4. To view an image separately, press the
enlargement button.
Pressing the Thumbnail
button (
)
[Normal display mode]
Pressing the
enlargement button
(
)
[Thumbnail display mode]
ŝ53Ş
Thumbnail (
) / Enlargement (
) button / Volume button ( )
ƃ Image enlargement
1. Select an image that you want to enlarge and
press the enlargement button.
2. Different parts of the image can be viewed by
pressing the ƊƌȜȞ icon.
3. Pressing the thumbnail button will zoom back to
the original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image
enlargement indicator shown at the bottom left
of the LCD monitor.
(If the image is not an enlarged view, the
indicator will not be displayed.)
You can also check the area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
ƃ Volume control : When a movie clip, voice memo
or voice recording file is playing
back, you can control the
volume using this button.
- When the voice recording and movie clip is
played back, the volume icon will display as
shown.
ƃ The maximum enlargement in proportion to the image size.
Image size
Maximum
enlargement
ŝ54Ş
X12.0
X11.6
X12.0
X10.1
X8.0
X4.0
Info (
) button
Printer (
ƈ Pressing the Info button, information of displayed image will display on the LCD
monitor.
) button
ƈ You can print images with this button after
connecting the camera to a PictBridge printer.
ˋIn some instances the camera may not connect to
the printer, this will depend on the make of the
printer.
Info (
Info (
) button
) button
ISO : 100
AV : F3.5
TV :1/45
Flash :Off
3072x2304
2007/02/01
Info (
- After the connection, the Easy printing menu will be
displayed on the LCD monitor.
) button
ŝ55Ş
Delete (
) icon
Effect: Image Editing
ƈ This deletes images stored on the memory card.
Resize
1. Select an image that you want to delete by
pressing the ȜȞ icon and press the DELETE
(
) icon.
2. Select the submenu values by pressing the Ɗƌ
icon and then press the OK icon.
- If [No] is selected : cancels "Delete Image".
- If [Yes] is selected : deletes the selected
images.
ƈ Change the resolution (size) of pictures taken. Select [Start image], [MP3 Skin]
to save an image as the start-up image, MP3 Skin.
MENU
Resize
Color Effect
Resize
5M
EFFECT
Image Edit
Image Edit
Image Adjust
Rotate
3M
Fun
Trimming
1M
Start Image
Delete?
No
Yes
ƃ Image Resize Types
(ƃ : User Selectable)
[Single Image]
5M
3M
1M
User Image
MP3 Skin
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
3M P
ŝ56Ş
1M P
ƃ
ƃ
2M W
1M W
ƃ
ƃ
ƃ
User Image
MP3 Skin
User Image
MP3 Skin
Effect: Image Editing
ƃ You can change the resolution of only those files compressed in the JPEG 4:2:2
format.
ƃ The resized image will have a new file name. The [User Image] image is stored
not on the memory card but on the internal memory.
ƃ If a new user image is saved, one of the two user images will be deleted in order.
Rotating an image
ƈYou can rotate the stored images by various degrees. Once the playback of the
rotated picture is finished, it will switch back to the original state.
Image Edit
MENU
ƃ Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files
can’t be resized.
Image Edit
Color Effect
Resize
EFFECT
ƃ A large sized image can be resized to a smaller sized image, but not vice versa.
Image Adjust
Rotate
Fun
Trimming
ƃ If the memory capacity is insufficient to store the resized image, a [Memory Full!]
message will display on the LCD monitor and the resized image will not be
stored.
Image Edit / Rotate
Pressing
Pressing
OK
[Saved Image]
Image Edit / Rotate
OK
[
: Left 90°]
: Rotate picture in a
counterclock-wise direction
Image Edit / Rotate
OK
[
: Right 90°]
: Rotate picture in a clock-wise
direction
ſ If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
ŝ57Ş
Effect: Image Editing
Trimming
Effect: Colour
Colour
ƈ You can extract part of the image and save it separately.
Image Edit
ƈ By using the camera's digital processor, it is possible to add special effects to
your images
Ŧ1.1
Color Effect
Color Effect / Color
Resize
Color
Rotate
Custom Color
Trimming
Color Filter
Color Mask
1. Select an image that you want to enlarge and
press the enlargement button.
Trimming?
2. Different parts of the image can be viewed by
No
pressing the ƊƌȜȞ icon.
Yes
3. Press the Trimming icon and the trimming menu
will be displayed.
4. Select a desired sub menu.
- [No] : The trimming menu will disappear.
- [Yes] : The trimmed image will save as a new file name, and display on the
LCD monitor.
ſ If there is insufficient memory space to save the trimmed image, the image
can’t be trimmed.
ŝ58Ş
Save
1. Select a desired colour icon and press the SAVE icon.
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Captured images will be stored in a blue tone.
: Save the image in negative mode.
2. The image is saved as a new file name.
Effect: Colour
Custom colour
Colour Filter
ƈ You can change the R (Red), G (Green) and B (Blue) values of the image.
Color Effect
Color Effect / Custom Color
ƃ With this menu, You can change the colour information of the image (excluding
Red, Blue, Green and Yellow) to Black and White colour.
Color Effect
Color
Color
Custom Color
Custom Color
Color Filter
Color Mask
Color Effect / Color Filter
Color Filter
Save
Color Mask
Save
Press the SAVE icon and the image is saved as a new file name.
: Selects R, G, B
- ȜȞ : Change the values
Color Effect / Custom Color
Save
ŝ59Ş
Effect: Colour
Effect: Image adjustment
The brightness, contrast, noise effect, saturation and red eye removal functions are
available with this menu.
Colour mask
ƃ With this menu, you can select a part you want to highlight. The rest of the image
will be black & white.
Image Adjust
MENU
Color Effect / Color Mask
Image Edit
Color Effect
Brightness
EFFECT
Color Effect
Image Adjust
Contrast
Fun
Add Noise
Color
Custom Color
Color Filter
Select (
) and a mark for
selecting part will display.
Saturation
Save
Color Mask
+, - icon : Changing the mask size
Color Effect / Color Mask
Color Effect / Color Mask
Brightness control
Save
Pressing the + icon
: Moving the mask to the +
position
Press the SAVE icon and the colour mask image will be
saved as a new file name.
[Final image]
ŝ60Ş
Save
ƈ You can change the brightness of image.
1. Select (
) and a bar for selecting the
brightness will display.
2. Change the brightness by pressing the ȜȞ
icon.
3. Press the SAVE icon and the image will be
saved as a new file name.
Image Adjust / Brightness
Save
Effect: Image adjustment
Contrast control
ƈ You can change the contrast of the image.
1. Select (
) and a bar for selecting the contrast
will display.
2. Change the contrast by pressing the ȜȞ icon.
3. Press the SAVE icon and the image will be saved
as a new file name.
Saturation control
Image Adjust / Contrast
ƈ You can change the saturation of the image.
1. Select (
) and a bar for selecting the saturation
will display.
2. Change the saturation by pressing the ȜȞ icon.
3. Press the SAVE icon and the image will be saved
as a new file name.
Image Adjust / Saturation
Save
Noise Effect
Save
Red eye Fix
ƈ You can add noise to an image to add a more classic feel to your photo.
1. Select (
).
Image Adjust / Add Noise
2. The noise effect added image will appear. Press
the SAVE icon and the image will be saved as a
new file name displaying [Processing!] message.
ƈ Red eye effect can be removed from the captured image.
1. Select (
)
Image Adjust
2. The red eye will be removed. Press the SAVE
icon and the image will be saved as a new file
name displaying the [Processing!] message.
/Red Eye Fix
Save
Save
ŝ61Ş
Effect: Fun
ƈ You can add fun effects to the saved image.
Fun / Cartoon 2
FUN / Cartoon 2
ƃ Pressing the Shutter button or the Play mode button in the FUN menu
activates the capture mode.
Pressing the OK icon
MENU
Image Edit
FUN
Color Effect
Cartoon
EFFECT
OK
Image Adjust
Photo Frame
Fun
High Light
Select a desired frame by
pressing the ȜȞ icon
You can change the location of the text box
by pressing the (
) icon
Composite
FUN / Cartoon 2
Fun / Cartoon 2
You can change the type and
location of the text box by
pressing the ȜȞ icon
Cartoon
ƈ You can add a text box on the image to make the image cartoon like.
FUN / Cartoon 1
FUN
Cartoon
Photo Frame
High Light
Composite
Set
Set
Press the Set icon
You can add the other image
Press the NewImage icon
Select the cartoon
menu (
)
OK
FUN / Cartoon 2
A cartoon frame will display
Select an image
ŝ62Ş
Effect: Fun
After pressing the (
) icon, you can change the type and location of the text box
by pressing the ȜȞ icon.
ƃ Before saving the cartoon image, you can change the selected image.
1. Press the NewImage icon and the selected image is deleted. (A window for
selecting the other image will appear)
2. Select a desired image.
FUN / Cartoon 2
Press the Set icon and press the
SAVE icon. The image is saved
as a new file name.
FUN / Cartoon 3
Set
New Image
Save
3. Press the (
) icon to select the type and location of the text box and press
the Set icon.
FUN / Cartoon 3
SAVE icon
New Image
Save
ŝ63Ş
Effect: Fun
Photo Frame
ƈ You can add 9 types of frame-like borders to a still image you want to capture.
ƈ Date & Time information will not be printed on the stored image taken with Photo
Frame menu.
FUN
FUN / Photo Frame 1
Cartoon
Photo Frame
High Light
Composite
Select a desired frame by pressing the ȜȞ icon.
- Press the SAVE icon and the image will be saved
as a new file name.
ŝ64Ş
Save
Effect: Fun
ƃ Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
Preset focus frames
ƈ You can make the subject stand out from its surroundings. The subject will be
sharp and in focus while making the rest out of focus.
1. Select a focus frame by pressing the ȜȞ icon and press the OK icon.
2. Select a desired range by pressing the LCD monitor.
3. Press the SAVE icon and the image is saved as a new file name.
FUN / High Light 1
FUN
Cartoon
FUN / High Light 1
FUN / High Light 1
Photo Frame
High Light
OK
Composite
OK
Select a desired frame by pressing the ȜȞ icon and press the OK icon.
Pressing the OK
icon
Save
[After changing the frame
position ]
Pressing the SAVE icon
FUN / High Light 1
FUN / High Light 2
FUN / High Light 3
FUN / High Light 4
OK
OK
OK
OK
[Range 1]
[Range 2]
[Range 3]
[Range 4]
ŝ65Ş
Effect: Fun
ſ Selecting 2 composite shots.
Composite image
ƈ You can combine 2 - 4 different shots in a still image.
FUN
FUN / Composite 1
FUN / Composite 1
Pressing the OK
icon
FUN / Composite 1
Cartoon
OK
Set
Photo Frame
High Light
Composite
OK
ſ Touch the LCD monitor where
you want to move the image.
INFORMATION
Pressing the Set icon
ƃ If you press the Shutter and Play mode button, a capture mode is executed.
FUN / Composite 1
Pressing the
NewImage icon
New Image
[Selecting the second image :
Pressing the Screen]
ŝ66Ş
Effect: Fun
2. Press the NewImage icon and a window for selecting the other image will
display.
The second image is selected. Press the Set icon.
FUN / Composite 1
FUN / Composite 1
FUN / Composite 2
Pressing the
Set icon
Set
New Image
Save
Selecting an
image: Press the
screen
Set
Press the SAVE icon and the image will be saved.
3. After pressing the Set icon, press the SAVE
icon. The image will be saved as a new file
name.
ƃ After selecting the last composite image, you can change a part composite
image.
1. After selecting the last image, press the Set icon
FUN / Composite 2
FUN / Composite 2
Pressing the Set
icon
Set
New Image
Save
[Changing the position
: Press the Screen]
ŝ67Ş
Effect: Fun
Sticker
Image Board
ƈ You can add various stickers on the image.
ƈ You can add a text or line on the saved image with the Touch Pen.
FUN
FUN / Pen Tool
FUN
FUN / Sticker
Sticker
Sticker
Select (
Pen Tool
)
Pen Tool
Select :
Make a text or line with the
Touch Pen
Select a desired sticker
FUN / Pen Tool
Press the Ȟ icon
Press the LCD monitor
and the selected sticker
is added.
Save
FUN / Pen Tool
Save
Exit
Save
ſ You can add the other stickers (Max. 2 stickers) by pressing the (
Press the (
) icon to delete the sticker.
To save the image, press the SAVE icon.
) icon.
Press the SAVE icon and a confirmation
window will display.
Press the [Yes] icon and the image is
saved as a new file name
ſ Icons of the Image Board
FUN / Pen Tool
Line tool
Thickness of line
Colour of line
Delete
Delete all image
Save / Exit
ŝ68Ş
Setting up the play back function using the LCD monitor
ƈ PLAY mode functions can be changed by using the LCD monitor. In the PLAY
mode, pressing the MENU icon displays the menu on the LCD monitor.
The menus you can set up in Play mode are as follows. To capture an image
after setting up the play menu, press the PLAY mode button or shutter button.
ƈ This menu is available while the camera is connected to a PictBridge supporting
printer (direct connection to the camera, sold separately) with a USB cable.
Menu tab
Main menu
Images
Menu tab
Main menu
Sub menu
Secondary menu
Page
Show Start
-
-
p.70
Effect
Off, Effect1,2,3, Mix
-
p.71
Music
Off, Music1, 2, 3,
My Music
-
p.71
Interval
1, 3, 5, 7, 10sec
-
p.71
Play Mode
One Play / Repeat Play
-
p.72
-
p.72
-
p.73
-
p.74
Voice Memo
Off
Size
On
Protect
Select
All
Delete
Select
Layout
All
Standard
DPOF
Copy To Card
One / All / Cancel
Index
No / Yes
Size
One / All / Cancel
No
-
Yes
-
p.74
p.76
Type
Sub menu
Secondary menu
One Pic
All Pics
Auto
Postcard
Card
4X6
L
2L
Letter
A4
A3
Auto
Full
1
2
4
8
9
16
Index
Auto
Plain
Photo
FastPhoto
-
Page
p.78
p.78
ŝ69Ş
Main menu
Quality
Date
File Name
Reset
Sub menu
Secondary menu
Auto
Draft
Normal
Fine
Auto
Off
On
Auto
Off
On
No
Yes
-
Page
)
ƈ Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
ƃ Start : The slide shown can be started with the [Start]
menu.
p.78
- To pause the slide shown while playing it back,
press the LCD monitor.
- Pressing the Ȟ icon again will cause the slide
show to restart.
- To stop playback of the slide show, press the
icon.
MENU
Menu tab
Slide Show (
Slide Show
EFFECT
Setting up the play back function using the LCD monitor
Sound
Playback
Setup 1
Setup 2
Slide Show
Show Start
Effect
p.79
Music
Interval
ſ Menus are subject to change without prior notice.
ŝ70Ş
Slide Show (
)
ƃ Effect : Unique screen effects can be used for the slide show.
ƃ Setting play interval : Set the slide show play interval.
- [1, 3, 5, 7, 10 sec] : the image is displayed during the set interval.
Slide Show
Effect
Show Start
Off
Slide Show
Effect
Music
1 sec
Effect
3 sec
Music
5 sec
Interval
7 sec
Effect 3
: Normal display.
: Image moves from the top left.
: Image is displayed slowly from the centre outwards.
: Image is displayed slowly.
: The image slides irregularly.
ƃ B.G.M : Set the slide show music.
Slide Show
Show Start
Effect 2
Interval
- [Off]
- [Effect1]
- [Effect2]
- [Effect3]
- [Mix]
Interval
Effect 1
INFORMATION
ƃ The loading time depends on the image size and quality.
ƃ While the slide show is playing, only the first frame of a MOVIE file is
displayed.
ƃ While the slide show is playing, the voice recording file will not be displayed.
Music
Show Start
Off
Effect
Music 1
Music
Music 2
Interval
Music 3
- [Off]
: The B.G.M is not played back.
- [Music 1, 2, 3] : A selected music is played back.
- [My Music]
: User selected music is played back.
ŝ71Ş
)
Voice memo (
Sound
Playback
Slide Show
Play Mode
Setup 1
Setup 2
ƈ You can add your voice to a stored still image.
Play Mode
One Play
Repeat Play
Playback
Voice Memo
MENU
MENU
Slide Show
EFFECT
ƃ Slide show type: Selects a slide show type.
)
Slide Show
Playback
Voice Memo
Off
EFFECT
Slide Show (
Sound
Protect
On
Setup 1
Delete
Setup 2
DPOF
- [One Play] : The slide show is closed after one cycle.
- [Repeat Play] : The slide show is repeated until cancelled.
00:00:00
Start : Shutter
- Press the shutter button to start recording and voice will be recorded to the
still image for 10 seconds.
- The recording can be stopped by pressing the shutter button again.
ŝ72Ş
Protecting images
ƈ This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
ƃ Protecting Images
Playback
Voice Memo
Protect
Select
Protect
[All] : Protect / release all saved images
- Select a desired sub menu. The menu will
disappear after setting up the menu.
- If you protect an image, the protect icon (
) will
be displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected from the
delete function, but will NOT be protected from the
format function.
Protect
Protect All?
Lock
Unlock
All
Delete
DPOF
1. Select a desired sub menu.
[Select] : Selection window for an image to be
protected / released is displayed.
- Select a protected image on the LCD monitor.
: Your changes will be saved and the
menu will disappear.
Playback / Protect
Exit
ŝ73Ş
Deleting images
DPOF
ƈ Of all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted. Remember that this will permanently delete
unprotected images. Important shots should be stored on a computer before
deletion takes place. The startup image and SKIN image are stored in the
camera's internal memory (i.e., not on the memory card) and it will not be
deleted even if you delete all files on the memory card.
ƈ DPOF (Digital Print Order Format) allows you to embed printing information on
your memory card’s MISC folder. Select the pictures to be printed and how
many prints to make.
ƈ The DPOF indicator will display on the LCD monitor when an image that has
DPOF information plays back. Images can then be printed on DPOF printers,
or at an increasing number of photo labs.
ƃ Deleting images
ƈ This function is not available for Movie clips and Voice recording files.
Playback
Voice Memo
Protect
Delete
Select
All
ƈ If a memory card is not inserted, the menus are still displayed in the LCD, but are
not selectable.
Delete
DPOF
Playback
1. Select a desired sub menu.
Playback / Delete
[Select] : Selection window for an image to delete
is displayed.
- Select a deleted image on the LCD monitor.
(
mark)
: Press the
icon to display the
confirmation message.
Press the [Yes] menu and
marked
Delete All?
images are deleted.
[All]
: Displays confirmation window.
No
Press the [Yes] menu and all unprotected
Yes
images are deleted.
If there aren’t protected images, all the
images are deleted and a [No Image!] message will display.
2. After deletion, the screen will be changed to the play mode screen.
ŝ74Ş
Voice Memo
DPOF
Standard
Protect
Index
Delete
Size
DPOF
DPOF : STANDARD
DPOF : Index
ƈ This function allows you to embed print quantity information on a stored image.
1. Select the [Standard] menu.
2. Select a desired sub menu.
[One Pic] : Selection window for an image to
print is displayed.
- ȜȞ
: Select an image to print.
- Ɗƌ
: Select the number of prints.
[All]
: Configure number of prints for all
pictures except movie and voice files.
- Ɗƌ
: Select a number of prints
[Cancel] : Cancel the print setup.
3. Press the OK icon to confirm the setting.
If an image carries DPOF instructions, the
DPOF indicator (
) will show.
DPOF
Standard
Index
Size
ƈ Images (except for movie clips and voice file) are printed as index type.
1. Select the [Index] menu.
2. Select a desired sub menu.
- If [No] is selected : Cancel the index print
setting.
- If [Yes] is selected : The image will be printed in
index format.
DPOF
Standard
Index
Size
Standard
0
OK
Standard
0
OK
ŝ75Ş
DPOF : Print size
Copy To Card
ƈ You can specify the print size when printing images stored on the memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.
ƈ This enables you to copy image files, movie clips and voice recording files on the
camera's built-in internal memory to the camera's removable SD memory card.
Playback
ƃ Setting the Print Size
1. Select the [Size] menu.
2. Select a desired sub menu by pressing the Ɗƌ
icon and press the OK icon.
[One Pic] : Selection window to change the print
size of an image is displayed.
- ȜȞ
: Select an image.
- Ɗƌ
: Change the print size.
- OK
: Your changes will be saved and the
menu will disappear.
[All]
: Change print size of all saved
images.
- Ɗƌ
: Select a print size
- OK
: Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
ſ DPOF [Size] secondary menu: Cancel, 3X5,
4X6, 5X7, 8X10
ſ Depending on the manufacturer and printer
model, cancelling the printing may take a little
longer for the printer to process.
ŝ76Ş
Copy To Card
Copy To Card
No
Yes
DPOF
Standard
Index
Size
Size
Cancel
ƃ Copying to the Memory Card
1. Select a desired sub menu.
- [No] : Cancels "Copy to Card".
- [Yes] : All images, movie clips and voice recording files saved in the internal
memory are copied to the memory card after the [Processing!]
message is displayed. After copying has been completed, the
screen will return to play mode.
OK
INFORMATION
Size
Cancel
OK
ƃ When this menu is selected without inserting a memory card, you can select
the [Copy To Card] menu but the menu can’t be run.
ƃ If there is not enough space available in the memory card to copy saved
images in the internal memory (450MB), the [Copy To Card] command will
copy only some of the images and display [Memory Full!] message. Then
the system will return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory card into the
camera.
ƃ When you move images from the internal memory to the removable SD
card, they will be automatically renumbered to avoid duplication of the file
name. If the last file in the memory card is S73R0010.jpg, the copied file
names start from S73R0011.jpg. After completing [Copy To Card], the last
stored image of the last copied folder is displayed on the LCD monitor.
PictBridge
ƈ You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
ƃ Setting up the camera for connection to the printer
1. Connect the camera and printer with USB
cable.
2. Select the [Printer] menu.
Select USB
Computer
Printer
ſ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge
compatible printer to the camera through USB cable with [Connecting Computer]
message. In this case, remove the cable and do the step 1, 2 again.
ƈ Easy printing
When you connect the camera to printer in the Play
back mode, you can print a picture easily.
- Pressing the printer (
) icon :
Currently displayed image will be printed with the
printer’s default setting.
- Pressing the ȜȞ icon :
Selects a previous / next image.
ƈ Connecting the Camera to a Printer
ŝ77Ş
PictBridge : Picture Selection
ƈ You can select images you want to print
PictBridge : Print Setting
ƈ You can select the Paper Size, Print Format, Paper Type, Print Quality, Date
Print, and File Name Print menus for printed pictures.
ƃ Setting the Number of Copies to Print
1. Press the Menu button and the PictBridge
menu will display.
2. Select the [Images] menu.
3. Select a desired sub menu.
- Select [One Pic] or [All Pics]. A screen where
you can set the number of copies to print will
appear as shown below.
PICT BRIDGE
Images
Size
Auto
Layout
Auto
1. Press the Menu button and the PictBridge
menu will display.
2. Select a desired menu.
3. Select a desired sub menu. The available
menus are listed below.
Layout
Auto
Type
Auto
Menu
Function
Sub menu
100-0060
Size
00
00
OK
OK
[When [One Pic] is selected]
[When [All Pics] is selected]
Layout
- Press the Ɗƌ icon to select the number of prints.
- When [One Pic] is selected : Use the ȜȞ icon to select another picture.
After selecting another picture, select the
number of prints for another picture.
- After setting the number of prints, press the OK icon to save.
- Press the
icon to return to the menu without setting the number
of prints.
ŝ78Ş
Size
Auto
Type
Auto
100-0060
4. Press the Print icon (
PICT BRIDGE
Images
) and images will be printed.
Type
Quality
Date
File Name
Set the size of the printing
paper
Auto, PostCard, Card, 4X6, L, 2L,
Letter, A4, A3
Set the number of pictures to
be printed on a sheet of paper
Auto, Full, 1, 2, 4, 8, 9, 16, Index
Set the quality of the printing
paper
Auto, Plain, Photo, FastPhoto
Set the quality of the picture to
be printed
Auto, Draft, Normal, Fine
Set whether to print the date
Auto, Off, On
Set whether to print the file
name
Auto, Off, On
ſ Some menu options are not supported on all printers.
If not supported, the menus are still displayed in the LCD, but are not selectable.
PictBridge : Reset
Sound menu
ƈ Initialises user-changed configurations.
1. Select the [Reset] menu by pressing the Ɗƌ
icon.
2. Select a desired sub menu.
- If [No] is selected : Settings will not be reset.
- If [Yes] is selected : All print and image
settings will be reset.
ſ Default print setting varies depending on the
printer manufacturer.
For your printer’s default setting, refer to the
user’s guide that came with your printer.
ƈ In this mode, you can set up sound settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
The items indicated by
are default settings.
PICT BRIDGE
Quality
Auto
Date
Auto
Mode
Menu
File Name
Auto
Sub Menu
Available Mode
Page
Off
Reset
Volume
Reset
No
Low
Medium
p.80
High
Yes
Off
Start Sound
Sound 1
Sound 2
p.80
Sound 3
Off
(SOUND)
Shutter Sound
Sound 1
Sound 2
p.80
Sound 3
Off
Beep Sound
Sound 1
Sound 2
p.80
Sound 3
Off
p.81
AF Sound
On
ŝ79Ş
Sound (
)
[ Volume ]
[ Shutter sound ]
ƈ You can set select a volume of sound, start up sound, shutter sound, warning
sound and AF sound.
ƈ You can select the shutter sound.
Sound
Sound
Volume
Volume
Medium
Off
Start Sound
Off
Low
Shutter Sound
Shutter Sound 1
Medium
Beep Sound
Beep Sound 1
Shutter Sound
Volume
Medium
Off
Start Sound
Off
Sound 1
Shutter Sound
Shutter Sound 1
Sound 2
Beep Sound
Beep Sound 1
Sound 3
High
ƃ [Volume] sub menu : [Off], [Low], [Medium], [High]
ƃ Shutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]
[ Start up sound ]
[ Beep Sound ]
ƈ You can select the sound that is activated whenever the camera is turned on.
ƈ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
Sound
Start Sound
Volume
Medium
Off
Start Sound
Off
Sound 1
Sound
Shutter Sound
Shutter Sound 1
Sound 2
Volume
Medium
Beep Sound
Beep Sound 1
Sound 3
Start Sound
Off
Sound 1
Shutter Sound
Shutter Sound 1
Soundd 2
Beep Sound
Beep Sound 1
Sound 3
ƃ Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3]
- If the start up image is set to [Off], the start up sound will not activate, even
though you may have set these to on.
ŝ80Ş
ƃ [Sound] sub menu : [Off], [Sound 1, 2, 3]
Beep Sound
Off
Sound (
)
Setup menu
[ AF sound ]
ƈ If you set AF sound to ON, AF sound will be activated when a subject is focused
so that you can be aware of the camera operation status.
ƈ In this mode, you can set up basic settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
The items indicated by
are default settings.
Menu tab
Sound
AF Sound
On
Sub menu
Main menu
Page
AF Sound
Off
File
Reset
Series
ENGLISH
On
LANGUAGE
ƃ [AF sound] sub menu : [Off], [On]
p.82
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
P”CCK»…
PORTUGUÊS
DUTCH
DANSK
SVENSKA
SUOMI
p.83
BAHASA
POLSKI
Magyar
Date&Time
Imprint
LCD
AF Lamp
Start Image
-
yy/mm/dd
mm/dd/yy
dd/mm/yy
Off
Off
Date
Date&Time
-
Dark
Normal
Bright
Auto
Off
On
Off
Logo
User Image
-
p.83
p.84
p.84
p.84
p.85
ŝ81Ş
Setup menu
Menu tab
Setup menu 1
Main menu
Sub menu
Page
[ File name ]
ƈ This function allows the user to select the file naming format.
Quick View
Off
0.5, 1, 3 sec
p.85
Power Off
1, 3, 5, 10 min
-
p.86
LCD save
Off
On
p.86
Calibration
-
-
p.87
Video Out
NTSC
PAL
p.87
Date&Time
Format
No
Yes
p.88
Imprint
Off
Reset
No
Yes
p.89
ſ Menus are subject to change without prior notice.
Setup1
File
File
Series
Reset
LANGUAGE
English
Series
[Reset] : After using the reset function, the next file name will be set from 0001
even after formatting, deleting all or inserting a new memory card.
[Series] : New files are named using numbers that follow the previous
sequence, even when a new memory card is used, or after formatting,
or after deleting all pictures.
- The first stored folder name is 100SSCAM, and the first file name is
S73R0001.
- File names are assigned sequentially from S73R0001 ƍ S73R0002
ƍ ~ ƍ S73R9999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM.
- Maximum numbers of files in a folder are 9999.
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format. If you change the image file name, the image
may not play back.
ŝ82Ş
Setup menu 1
[ LANGUAGE ]
[ Setting up the Date / Time / Date type ]
ƈ There is a choice of languages that can be displayed on the LCD monitor.Even if
the battery is removed and inserted again, the language setting will be
preserved.
ƈ You can change the date and time that will be displayed on the captured images
and set up the date type.
- Date type : [yy/mm/dd], [mm/dd/yy], [dd/mm/yy], [Off]
Setup1
File
Series
Language
ENGLISH
Setup1
Setup1 / Date&Time
LANGUAGE
English
File
Series
Date
12 : 00
FRANÇAIS
Time
Date&Time
LANGUAGE
English
Imprint
Off
DEUTSCH
Date&Time
Type
yy / mm / dd
Imprint
Off
07 / 02 / 01
OK
- LANGUAGE sub menu
: English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
Bahasa (Malay / Indonesian), Arabic, Czech, Polish, Hungarian and Turkish.
ŝ83Ş
Setup menu 1
[ Imprinting the recording date ]
[ LCD brightness ]
ƈ There is an option to include DATE / TIME on still images.
ƈ You can adjust the LCD brightness.
Setup1
File
Series
Imprint
Setup1
Off
LANGUAGE
English
Date
Date&Time
Date&Time
LCD
LCD
Normal
Dark
AF Lamp
On
Normal
Start Image
Off
Bright
Imprint
Off
ƃ Sub menus
[Off]
: The DATE & TIME will not be imprinted on the image file.
[Date]
: Only the DATE will be imprinted
on the image file.
[Date&Time] : The DATE & TIME will be imprinted on the image file.
Auto
ƃ [LCD] sub menu : Dark, Normal, Bright, Auto
[ Auto Focus lamp ]
ƈ You can turn on and off the Auto Focus lamp.
ſ The Date & Time are imprinted at the bottom right side of the still image.
ſ The imprint function is applied only to still images except for the images taken in
photo frame effect mode.
ſ Depending on the manufacturer and print mode, the date printed on an image
may not be printed correctly.
Setup1
AF Lamp
LCD
Normal
Off
AF Lamp
On
On
Start Image
Off
ƃ Sub menus
[Off] : The AF lamp will not light up in a low light condition.
[On] : The AF lamp will light up in a low light condition.
ŝ84Ş
Setup menu 1
Setup menu 2
[ Start up image ]
[ Quick view ]
ƈ You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
ƈ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
Setup1
Setup1 / Start Image
LCD
Normal
AF Lamp
On
Setup 2
Start Image
Off
OK
ƃ Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with the [User Image] in the
[RESIZE] menu in the play mode.
- The start-up image will not be deleted by [DELETE] or [Format] menu.
- The User images will be deleted by [Reset] menu.
Quick View
Quick View
0.5sec
Off
Power Off
3min
0.5 sec
LCD Save
Off
1 sec
Calibration
3 sec
ƃ Sub menus
[Off]
: The quick view function can’t be activated.
[0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time.
ŝ85Ş
Setup menu 2
[ Auto power off ]
[ LCD save ]
ƈ This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
ƈ If you set the [LCD save] to On and the camera isn't operated during the
specified time, the LCD monitor will be turned off automatically.
Setup 2
Setup 2
Power Off
1 min
Quick View
0.5sec
Off
Power Off
3min
3 min
Power Off
3min
On
LCD Save
Off
5 min
LCD Save
Off
Calibration
10 min
ƃ Sub menus
[1, 3, 5, 10 min] : The power will turn off automatically if not used for the period of
time specified.
- After replacing the battery, the power off setting will be preserved.
- Note that the automatic power off function will not operate if the camera is in
PC / Printer mode, slide show, playing back a voice recording / movie clip /
MP3 / PMP / TEXT files and taking a composite shot.
ŝ86Ş
LCD Save
Quick View
0.5sec
Calibration
ƃ [LCD save] sub menu
[Off] : The LCD monitor will not be turned off.
[On] : If you select the [LCD Save] and the camera isn't operated during the
specified time (about 30 SEC.), the camera power will be idle (LCD
monitor : OFF, Camera status lamp : Blinking) automatically.
Setup menu 2
[ Calibration]
[ Selecting Video out type ]
ƈ This menu will increase the sensitivity of the Touch Pen. Press the Touch Point
on the LCD monitor with the Touch Pen.
ƈ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
Setup 2
Video Out
NISC
Power Off
3min
Format
LCD Save
Off
Reset
Calibration
NTSC
PAL
Touch
ſ After pressing the Touch Point three times, the
menu is set and pre-view image will display.
Setup 2 / Calibration
Video Out
Setup 2
Setup 2 / Calibration
Quick View
0.5sec
ƈ Connecting to an external monitor
When the camera is connected to an external monitor in the play back mode,
the image (movie or still image) will be visible on the external monitor and the
LCD monitor of the camera will turn off.
When connected to an external monitor, some functions are not available.
Touch
ſ When you calibrate the LCD monitor, press the Calibration point exactly or
menus on the LCD monitor won't be selected or set.
Yellow - Video
White - sound
ŝ87Ş
Setup menu 2
- NTSC
: U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
[ Formatting a memory ]
- PAL
: Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway.
ƈ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
- When using a TV as an external monitor, you will need to select the external or
AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls
to centre it.
- When the camera is connected to an external monitor, some parts of the image
may not appear.
Setup 2
Video Out
NISC
Formatting the memory will delete all
data on the memory (Images, MP3,
PMP, text and World Tour Guide Files)
Format
Format?
Reset
No
Yes
- After connected to an external monitor, it may take time for the operation on the
touch screen to be recognized. Operate the hand sign on the external monitor
correctly using a touch pen.
- Functions available when connected to an external monitor are the following.
‫ ڹ‬Selection of playback file type (still image, movie clip, and voice)
‫ ں‬playback of still image/movie clip/voice recoding
‫ ڻ‬Slide show (played with the value set before connected to an external
monitor)
‫ ڼ‬Selection of still image/movie clip/voice file in thumbnail display mode
‫ ڽ‬Image enlargement
‫ ھ‬Deletion of still image/movie clip/voice file
‫ ڿ‬PMP playback function (played with the value set before connected to an
external monitor)
ŝ88Ş
ƃ Sub menus
[No] : The memory will not be formatted.
[Yes] : A [Processing!] message appears and the memory will be formatted. If
you run FORMAT in Play mode, a [No Image!] message will appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
Setup menu 2
MP3 / PMP / TEXT VIEWER Mode
[ Initialisation ]
ƈ All camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
Setup 2
Reset
Video Out
NISC
No
Format
Yes
ƈ This camera has an embedded MP3, TEXT VIEWER & Portable Media Player
program. You can take a picture, listen to the MP3 files and watch the movie clip
(Movie and Video clip) whenever you want. To use the PMP mode, you must
convert the multimedia file with the Digimax Converter. In the TEXT VIEWER
mode you can see the text on the LCD monitor with listening MP3 music.
ƈ If the file name is over 94 (2 Byte language like Korean, Chinese, etc.) or 188
(1 Byte language like English) characters, the file name won't appear on the
playlist.
Reset
ƈ MP3, PMP, Text Viewer, World Tour Guide
You can select a multi-media mode by rotating the LCD monitor. (p.16)
ƃ Sub menus
[No] : Settings will not be restored to their defaults.
[Yes] : All settings will be restored to their defaults.
Resume
Resume
Open
Open
AUTO : Shutter
Multimedia
PMP
TextViewer
Travel Guide
Resume
Open
AUTO : Shutter
ŝ89Ş
MP3 / PMP / TEXT VIEWER Mode
INFORMATION
Downloading files
ƈ To use MP3, PMP and TEXT VIEWER functions, MP3, PMP(multimedia files)
and TEXT files must be saved in the internal memory or memory card of this
camera.
1. Save the desired files on your PC.
2. Connect the camera to your PC with the USB cable and turn on the camera.
3. Open Window's EXPLORER and search for [Removable Disk].
4. Make a folder under the Removable Disk.
- MP3 Mode : [MP3]
- PMP Mode : [PMP]
- TEXT VIEWER mode :
[TEXT]
5. Select desired files that you want to save and copy them to the desired folder.
ŝ90Ş
ƃ Take care of the illegal duplication of MP3 & multimedia files. It violates
various copyright laws.
ƃ This camera can only play back MP3 files in the MP3 mode and SDC files
(modified XviD MPEG4 video / MPEG Layer2 audio type) in the PMP mode.
ƃ If a file cannot be played back on this camera, convert it into the supported
file format by using the Digimax Converter. (p.117)
ƃ Up to 254 files can be saved in a folder.
ƃ You can make up to 100 subfolders under the root folder. You can't make 2
subdirectories under the subfolder.
Starting the MP3 / PMP / TEXT VIEWER mode
ƈ Insert the memory card that holds MP3, PMP and TEXT files. As this camera
has a 450MB internal memory, you can save the files on the internal memory
too.
1. Select a desired Multi media mode.(p.16)
2. A menu will display as shown.
[Resume] : memorizes the latest stopped frame.
MP3 mode : plays back from the beginning of
the file.
PMP mode : plays back from the latest stopped
frame.
TEXT VIEWER mode : plays back from the
latest stopped frame.
[Open] : The browsing menu will be displayed to
enable the selection of a desired file.
3. Select a desired file and press the OK icon.
The file will then play back.
[MP3 mode]
MUSIC LIST
01-Audio Track 01.mp3
Multimedia
02-Audio Track 02.mp3
1. 01-Audio Track 01.mp3
A
00:02 / 04:55
192K
MP3
PMP
TextViewer
[PMP mode]
[PMP mode]
PMP LIST
CJ-movie sample.sdc
Resume
Open
0:00:00 / 0:04:55
[SDC]-movie sample.sdc
Who bent my camera?
[TEXT VIEWER mode]
TEXT LIST
1/2
ANSI
1.Samsungcamera.txt
Samsung camera.txt
Samsungcamera.txt
Thank you for buying a Samsung Camera.
This manual will guide you through using
the camera, includin capturing images,
downloading images and using the
application software.
Please read this manual carefully before
using your new camera.
ŝ91Ş
Starting the MP3 / PMP / TEXT VIEWER mode
INFORMATION
ƃ The order of play lists on the browsing menu and the order of file saved in
the memory are the same.
ƃ A title coded with unsupported language is displayed as "--------".
ƃ The automatic power off function will not operate if the a file is playing back.
ƃ If there over 100 files in the memory, it takes a little longer for the camera to
process to the MP3/ PMP mode.
ƃ If there is no operation during the specified time (About 30 sec.) in the MP3 /
TEXT VIEWER mode (B.G.M : Off, Auto scroll : Off), the LCD monitor is
turned off automatically and the camera status lamp blinks. To use the
camera, press any of the camera buttons except the Power button.
ƃ Playing back the VBR (Variable Bit Rate) file. A VBR file varies the amount
of output data in each time segment based on the complexity of the input
the data in that segment. When the VBR encoded files are played back, the
LCD will appear as shown.
- The VBR icon will appear instead of the Bit rate icon.
- The time line isn't displayed.
- Playing time will appear but the whole running time won't.
ƃ For about 2 seconds of the start and end frames of the PMP file, no camera
button except the Power button can be operated.
ƃ When an MP3 file doesn't play back correctly, download a free MP3
conversion program and convert it before using the MP3 file on the camera .
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode
ƈ The LCD monitor displays information about the MP3, multimedia and Text file.
Battery (p.10)
MP3 mode
Lock (p.94)
Volume control (p.93)
Equalizer (p.95)
Volume (p.93)
Play mode (p.96)
Bit rate (p.92)
Title of file
1. 01-Audio Track 01.mp3
00:02/04:55
Play list icon (p.95)
Menu Icon (p.95)
Play / Pause / Control
icon (p.94)
[MP3 mode]
Title of file
PMP mode
Playing time
Battery (p.10)
Volume (p.93)
CJ-movie sample.sdc
0:00:00 / 0:04:55
Status bar
Playing time
Play / Pause / Control
icon (p.94)
Caption (p.117)
Lock (p.94)
SRS (p.99)
Menu Icon (p.95)
ŝ92Ş
Who bent my camera?
[PMP mode]
Play list icon (p.95)
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode
Current page / Whole page
Encoding Type (ANSI,Uni)
Battery (p.10)
Text mode
Scroll icon
Play list icon (p.95)
Menu icon (p.95)
1/2
ANSI
1.Samsungcamera.txt
Thank you for buying a Samsung
Camera.
This manual will guide you through using
the camera, includin capturing images,
downloading images and using the
application software.
Please read this manual carefully before
using your new camera.
Volume (p.93)
Using the camera buttons to adjust the camera
Volume button / icon
ƈ You can control the volume with this button.
There are 0 ~ 30 steps.
- Mute (
) : mutes the sound
File name
ſ In the MP3 mode, you can control the volume with
+/- icon when the LCD monitor is not rotated.
Text contents
1. 01-Audio Track 01.mp3
A
00:02 / 04:55
192K
[TEXT VIEWER mode]
ſ Encoding Type : ANSI (American National Standards Institute) Type,
Uni (Unicode) Type
- When the ANSI encoding type is displayed
: You should set the Language of the TEXT VIEWER menu to view the text.
Set the Language menu as one that is the same as the Operating System
language that the text was created.
- When the UNI encoding type is displayed
: The text file will be displayed with any language menu.
ſ If the text file size is over 10MB, it may take longer to view the text file.
Divide the text file and the loading time will be shorten.
ŝ93Ş
Using the camera buttons to adjust the camera
Hold button
Play & Pause / Control icon
ƈ When a file is playing back, press the
will resume playback.
icon to pause the file. Pressing it again
ƈ MP3 mode
When an MP3 file is not played back, you can search the MP3 files by pressing
the
icon.
When an MP3 file is played back, you can't search the desired part of the MP3
file.
ƃ If you press the Hold button for over 1 second, the
camera buttons are locked.
- If the camera buttons are locked, the buttons can't
be operated while playing back. But Power off,
Video out, USB connection and LCD on functions
can be operated.
ƈ PMP mode
You can search the Multimedia files by pressing the
icon.
And you can search a desired frame of the file during play back by pressing the
ȜȜ ȞȞ icon.
ƈ TEXT VIEWER mode
When the text list menu is displayed : select a text file by pressing the Ɗƌ icon.
When the text is displayed : press the Ɗƌ icon and previous / next page
of the file will be displayed.
CJ-movie sample.sdc
0:00:00 / 0:04:55
1. 01-Audio Track 01.mp3
00:02/04:55
Who bent my camera
- If you press the Lock button again or turn off the camera, the camera is
unlocked.
ŝ94Ş
Using the camera buttons to adjust the camera
Equalizer icon
ƈ The user can select appropriate sound with this setting.
- Press the Equalizer icon and select either <SRS>, <Normal>, <Live>,
<Classic>, <Jazz>,<Rock> or <Dance>.
Setting up the playback function using the LCD monitor
ƈ MP3 / PMP / TEXT VIEWER mode functions can be changed by using the LCD
monitor.
Press the MENU icon and the menu will display on the LCD monitor.
Menu tab
Main menu
Play mode
Equalizer
1. 01-Audio Track 01.mp3
MP3 Skin
Repeat All
Random
Random Repeat
-
p.96
Default 1
Default 2
User Skin 1
User Skin 2
Show Play
Play / Repeat Play
p.97
Interval
2, 3, 5 sec
p.97
Normal
30sec
1min
3min
5min
10min
Off
On
p.96
Slide Show
Playlist icon
ƃ While a multimedia file is playing back, you can select a desired file by using the
browsing menu.
1. While a multimedia file is playing back, press the Playlist icon (
2. A playlist that is currently playing will be highlighted.
3. Select a desired file and the file will be played back.
MUSIC LIST
Repeat One
MP3
00:02/04:55
01-Audio Track 01.mp3
Page
Sub menu
Play All
PMP LIST
[SDC]-movie sample.sdc
).
Seeking
p.98
PMP
SRS
p.99
TEXT LIST
Samsung camera.txt
02-Audio Track 02.mp3
[MP3 Mode]
[PMP Mode]
[TEXT VIEWER Mode]
ŝ95Ş
Setting up the playback function using the LCD monitor
Menu tab
Main menu
Page
Sub menu
Off
0.8 sec
1.1 sec
1.4 sec
1.7 sec
2.0 sec
MP3 BGM
2.3 sec
-
Off
On
ENGLISH
TEXT
VIEWER
p.100
P”CCK»… PORTUGUÊS
DANSK
Delete
MP3 MENU
SVENSKA
DUTCH
Play All
MP3 Skin
Default 1
Repeat One
Slide Show
Repeat All
Random
POLSKI
Magyar
-
Select
ſ Menus are subject to change without prior notice.
p.100
SUOMI
BAHASA
All
Play Mode
Play Mode
Play All
FRANÇAIS
DEUTSCH ESPAÑOL ITALIANO
Language
Delete
ƈ You can set various repeat and shuffle options.
This function is adopted only in the selected folder.
p.99
Auto Scroll
Play mode
[Play All]
[Repeat One]
[Repeat All]
[Random]
[Ramdom Repeat]
: plays a single track once.
: plays a single track repeatedly.
: plays all tracks in the folder repeatedly.
: randomly plays all tracks in the folder once.
: randomly plays all tracks in the folder repeatedly.
Skin of MP3 player
p.98
ƈ You can set the skin of MP3 player.
[Default 1, 2] : Default skin will be set.
[User Skin 1, 2] : An image created by the [MP3 Skin] menu (p.56) will be set.
MP3 MENU
MP3 MENU / MP3 Skin
Play Mode
Play All
MP3 Skin
Default 1
Slide Show
OK
ŝ96Ş
Setting up the playback function using the LCD monitor
Playing back the slide show
Setting up the recording function in the MP3 mode
ƈ While the MP3 file is playing back, captured images are displayed on the LCD
monitor continuously.
MP3 MENU
1. Press the Shutter button and the MP3 stand-by
icon will display.
2. Press the Shutter button and an image will be
taken.
Slide Show
Play Mode
Play All
Show Play
MP3 Skin
Default 1
Interval
2 sec
ƈ You can take a picture and listen to the MP3 files at the same time
Slide Show
ſ Press the Mode icon and a menu as shown
[Play]
: Display the images once.
[Repeat Play] : Display the images continuously.
will display. Press the Auto icon and the Auto
recording mode will be activated.
Shooting
Auto
Multimedia
Slide Show
Show Play
MP3
One Play
Interval
2 sec
Repeat Play
ſ When the playing back is complete,
the slide show will stop.
ſ To pause the slide show, press the LCD monitor.
INFORMATION
ƃ The camera settings are fixed to default setting of Auto mode
(
,
,
,
). The settings can’t be changed.
ƃ If the memory card is not inserted, this function will not operate.
Occasionally the next file will be played back when you press the Shutter
button, even though a memory card is inserted.
ƃ If there is no button operation during 10 seconds in the MP3 capturing
mode, the MP3 mode is activated.
Setting slide show interval
ƈ You can set the slide show play interval of MP3
mode.
- Select an interval from 2, 3 or 5 seconds.
Slide Show
Show Play
Interval
2 sec
2 sec
3 sec
5 sec
ŝ97Ş
Setting up the playback function using the LCD monitor
Delete
Frame search
ƈ Files stored on the memory card will be deleted. In the MP3 mode, only MP3
files are deleted. In the PMP mode, only multimedia files are deleted. In the
TEXT VIEWER mode, TEXT files are deleted.
1. Press the menu icon and (
) icon.
Delete
Select
)TT
2. Select a desired menu.
[Select] : You can select and delete a file on the
play list.
- [No] : cancels the deletion
- [Yes] : deletes the selected file.
[All]
PMP MENU
Seeking
Seeking
Normal
Normal
SRS
On
30 sec
sec
1 min
min
3 min
min
30
1
3
MUSIC LIST
01-Audio Track 01.mp3
02-Audio Track 02.mp3
: A window for confirming the deletion
will appear. Press the [Yes] icon and
all files are deleted.
Delete All?
No
Yes
ŝ98Ş
ƈ You can set the time of skip range when you search the movie by pressing the
ȜȜ ȞȞ icon.
You can easily search for a frame you want.
[Normal] : This will skip frame by frame whenever you press the icon. (2-32X)
[30 sec., 1, 3, 5, 10 min.] : This will skip a set frame whenever you press
the Left / Right icon.
Setting up the playback function using the LCD monitor
SRS
Auto Scroll
ƈ You can select the 3D (3 dimentional multi-sound) Sound that has fine low and
high pitched sound.
PMP MENU
SRS
ƈ The playing text is scrolled automatically and displays on the LCD monitor.
TEXT VIEWER MENU
Auto Scroll
Seeking
Normal
Off
Auto Scroll
Off
Off
SRS
On
On
MP3 BGM
On
0.8 sec
Language
ENGLISH
1.1 sec
1.4 sec
[Off]: cancels the SRS.
[On]: selects the SRS.
[Off] : The text will not be scrolled automatically.
ſ Press the Ɗƌ icon and you can use the Auto Scroll function.
[0.8, 1.1, 1.4, 1.7, 2.0 , 2.3 sec]
: The text will be scrolled automatically.
The interval is marked on each menu icon.
ŝ99Ş
Setting up the playback function using the LCD monitor
MP3 BGM Setting
Language setting
ƈYou can set up the language of OS (Operating System) that was used for the text
file.
ƈ You can play MP3 files when you are playing the text.
TEXT VIEWER MENU
MP3 BGM
TEXT VIEWER MENU
Auto Scroll
Off
Off
MP3 BGM
On
On
Language
ENGLISH
Auto Scroll
Off
Language
ENGLISH
MP3 BGM
On
ጥૹ࿴
Language
ENGLISH
FRANÇAIS
DEUTSCH
[Off] : You cannot play the MP3 files.
[On] : When you are playing the text, you can play the MP3 files.
ſ The last played MP3 files will be executed.
ŝ100Ş
- If the characters of the text file aren't displayed correctly, open the file on
Windows 2000 or later and save it again. We recommend using 'Notepad' and
it has to be saved as ANSI encoding type.
- Some unique characters may not be displayed correctly on the camera.
- Encode the text files as the standard type or some characters may not be
displayed correctly.
World Tour Guide
ƈ You can get the useful travel information for destinations around the world.
ƈ Korean, English and Chinese information is available and the language can be
varied in accordance with the sales region.
ƈ You can download the tour guide information from the Samsung Camera
website.
World Tour Guide mode
ƈ Select the World Tour Guide mode
Multimedia
PMP
TextViewer
Travel Guide
Download the tour guide information
ƈ In order for you to use the World Tour Guide function, the tour information file
should be stored on the internal memory of the camera.
Starting the world tour guide
1. Visit http://www.samsungcamera.com then select the tour guide information
you want.
2. Download the file to the computer and extract the file.
3. Connect and turn on the camera and computer.
4. Run the Window Explorer. Find the Removeable disk.
5. Make [TOUR] folder on the Removeable disk.
Select the location.
Select the country.
Select the state.
Select the city.
6. Select a file you want and copy it to the removeable disk.
ŝ101Ş
World Tour Guide
ſ Tour Guide Mode icon
Return to start
Up
Multimedia mode
Down
Select the tour site.
Tour guide information displays.
Select the tour place.
Back
Return to the home menu
Information
Close
You can find the detail information and pictures by pressing each icons.
INFORMATION
Checking the site image
Guide of the site
ŝ102Ş
ƃ Saving the information of some sites may take long time. Save information
of each site in order.
ƃ If the downloaded files are changed by any non-official methods, the files
don't playback on the camera.
ƃ Formating the camera deletes all data on the memory (including protected
images, Movies, Multi media files and Tour Information). Copy the files to a
computer before formating the memory.
ƃ If there is no related site information file on the memory, the site menu can
be displayed but can't be selected.
Important notes
Be sure to observe the following precautions!
ƈ This unit contains precision electronic components. Do not use or store this unit
in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
ƈ Do not leave this camera in places subject to dust, chemicals (like naphthalene
and mothball), high temperature and high humidity. Keep this camera in a
hermetically sealed box with silica gel when not planning to use it for a long
period.
ƈ Sand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or
other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
ƈ Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from impact. When this camera is not used,
keep this camera in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof. To avoid dangerous electrical shocks, never
hold or operate the camera with wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or
sand get inside the camera. Doing so may result in failure or may permanently
damage the unit.
ƈ Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this occurs, turn
the camera off and wait for at least 1 hour until all moisture is dispersed.
Moisture build up can also occur in the memory card. If this happens, turn off
the camera and remove the memory card. Wait until the moisture has
dispersed.
ƈ Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and
deterioration of the image sensor.
- Don't get fingerprints or foreign substances on the surface of the lens.
ƈ If the digital camera is not used for a long period, an electric discharge can
occur. It is a good idea to remove the batteries and the memory card if you do
not intend using the camera for an extended period of time.
ƈ If the camera is exposed to an electronic interference, it will turn itself off to
protect the memory card.
ƈ Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid
can be used. Clean the camera body with a soft cloth. Do not allow this camera
to come into contact with solvent materials such as benzol, insecticide, thinners
etc. This may damage the body shell of the camera and also affect its
performance. Rough handling can damage the LCD monitor. Take care to
avoid damage and keep the camera in its protective carry case at all times
when not in use.
ƈ Do not attempt to disassemble or modify the camera.
ŝ103Ş
Important notes
ƈ Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
ƈ When images are uploaded or downloaded , the data transfer may be affected
by static electricity. In this case, disconnect and re-connect the USB cable before
trying the transfer again.
ƈ Before an important event or going on a trip, you should check the camera
condition.
- Take a picture to test the camera and always carry a spare fully charged
battery.
- Samsung cannot be held responsible for camera malfunctions.
ƈ Do not use headphones/earphones while driving, cycling, or operating any
motorized vehicle. It may create a traffic hazard and can be illegal in some
areas.
ƈ Avoid using headphones/earphones at high volume. Hearing experts advise
against continuously loud and extended play. If you experience a ringing in your
ears, reduce volume or discontinue use.
Warning indicator
ƈ There are several warnings that may appear on the LCD display
Card Error!
ϛMemory card error
ƍ Turn off the camera power and turn it on again
ƍ Insert the memory card again
ƍ Insert the memory card and format the memory card (p.88)
Card Locked!
ϛThe memory card is locked
ƍ SD memory card : Slide the write protect switch towards the top of the
memory card
No Card!
ϛA memory card is not inserted
ƍ Turn off the camera power
ƍ Insert the memory card
ƍ Turn on the camera power
No Image!
ϛThere are no images stored on the memory
ƍ Take images
ƍ Insert a memory card that is holding some images
File Error!
ϛFile error
ƍ Delete the file
ϛMemory card error
ƍ Contact a camera service centre
Low Battery!
ϛThere is low battery capacity
ƍ Insert charged battery
ŝ104Ş
Warning indicator
Low Light!
ϛWhen taking pictures in dark places
ƍ Take pictures in Flash Photography mode.
Out Of Number
ϛ When selecting too many printing pages in the PictBridge menu.
ƍ Select printing page within the limitation.
DCF Full Error
ҮViolation of DCF format
ƍ Copy the images to a PC and format the memory.
Before contacting a service centre
ƈ Please check the following
The camera doesn’t switch on
ϛThere is low battery capacity
ƍ Insert charged battery
ϛBattery is inserted incorrectly with the polarities reversed.
ƍ Insert the battery according to the polarity marks (+, -)
ϛThe rechargeable battery is not inserted
ƍ Insert the battery and turn on the camera
The camera power ceases while in use
ϛThe battery are exhausted
ƍ Insert charged battery
ϛThe Camera is turned off automatically
ƍ Turn on the camera power again.
Battery power quickly drains
ϛThe Camera is being used in low temperatures
ƍ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
Camera does not take images when the Shutter button is pressed
ϛThere is insufficient memory capacity
ƍ Delete unnecessary image files
ϛThe memory card has not been formatted
ƍ Format the memory card (p.88)
ϛThe memory card is exhausted
ƍ Insert a new memory card
ϛThe memory card is locked
ƍ Refer to [Card Locked!] error message
ϛThe cameraŖs power is off
ƍ Turn the camera power on
ϛThe battery is exhausted
ƍ Insert charged battery.
ϛBattery is inserted incorrectly with the polarities reversed.
ƍ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ϛThe camera stopped due to a malfunction
ƍ Remove / re-insert battery and switch the camera on
The images are unclear
ϛA picture was taken of the subject without setting an appropriate macro mode
ƍ Select an appropriate macro mode to take a clear image.
ϛTaking a picture beyond the flash range
ƍ Take a picture within the flash range
ϛThe lens is smudged or dirty
ƍ Clean the lens
ŝ105Ş
Before contacting a service centre
The flash does not fire
ϛFlash off mode has been selected
ƍ Dis-engage flash off mode
ϛThe camera mode can't use the flash
ƍ Refer to the FLASH instruction (p.28)
No image on external monitor
ϛThe external monitor has not been connected properly with the camera
ƍ Check the connection cables
ϛThere are incorrect files in the memory card
ƍ Insert a memory card that has correct files
Incorrect date and time is displayed
ϛThe date and time have been set incorrectly or the camera has adopted the
default settings
ƍ Reset the date and time correctly
When using the PC’s explorer, the [Removable Disk] file does not show
ϛCable connection is incorrect
ƍ Check the connection
ϛThe camera is off
ƍ Turn the camera on
ϛThe operating system is not Windows 98SE, 2000, ME, XP, Vista /
Mac OS 10.1 ~ 10.4. Alternatively the PC does not support USB
ƍ Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 ~ 10.4 to PC that
supports USB
ϛThe camera driver is not installed
ƍ Install a [USB Storage Driver]
The camera buttons do not operate
ϛCamera malfunction
ƍ Remove / re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ϛIncorrect memory card format
ƍ Re-format the memory card
The images don't play back
ϛIncorrect file name (Violation of DCF format)
ƍ Do not change the image file name
Colour of image is different to the original scene
ϛWhite balance or effect setting is incorrect
ƍ Select appropriate White balance and effect
Images are too bright
ϛExposure is excessive
ƍ Reset exposure compensation
ŝ106Ş
Specification
Image Sensor - Type : 1/2.5ůCCD
- Effective Pixel : Approx. 7.2 Mega Pixels
- Total Pixel : Approx. 7.4 Mega Pixels
Lens
- Focal Length : f = 6.3 ~18.9mm
(35mm equivalent : 38 ~114mm) : NV lens
- F No. : F 3.5 ~ F 4.5
- Digital Zoom :ϛStill Image mode : 1.0X ~ 5.0X
ϛPlay mode : 1.0X ~ 12.0X (depends on image size)
LCD Monitor 3.0" wide color TFT LCD (230,000 dots, Touch Screen)
Focusing
- Type : TTL auto focus, Multi-AF, Center AF, Face Recognition AF
- Range
Normal
Wide
Tele
Macro
5cm ~ 80cm
80cm ~ infinity
40cm ~ 80cm
Super Macro
1cm ~ 5cm
-
Auto Macro
5cm ~ Infinity
40cm ~ Infinity
Special Effect icon Effect - Colour : Normal, B & W, Sepia, Red, Green, Blue,
Negative, Custom colour, Colour Mask
Image Adjustment : Saturation
FUN : Cartoon, Photo Frame, Preset focus frame,
Composite
Image Editing - Resize, Rotate, Trimming
Colour : B&W, Sepia, Red, Green, Blue, Negative,
Custom Colour, Colour Filter, Colour Mask
Image Adjustment : Brightness, Contrast, Sturation,
Noise Effect, Red Eye Fix
FUN : Cartoon, Photo Frame, Preset Focus Frame,
Composite, Sticker, Pen Tool
White Balance Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom
Voice Recording Voice Recording (Recording time: depending on the memory capacity),
Voice Memo in Still Image (max. 10 sec.)
Shutter
- Speed : 1 ~ 1/2,000 sec. (Night : 16 ~ 1/2,000 sec.)
Date Imprinting Date&Time, Date, Off (user selectable)
Exposure
- Control : Program AE, Metering : Multi, Spot, Center, Face
Recognition
- Compensation : ť2EV (1/3EV steps)
- ISO Equivalent : Auto, 80, 100, 200, 400, 800, 1600
Shooting
Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync,
Flash off, Red eye fix
- Range : Wide : 0.3m ~ 3.8m, Tele : 0.5m ~ 2.8m
- Recharging Time : Approx. 5.5 sec.
Sharpness
Soft+, Soft, Normal, Vivid, Vivid+
- Still Image : ŋAuto, Program, ASR, Scene
ſ Scene : Night, Portrait, Children, Landscape, Close-up, Text,
Sunset, Dawn, Backlight, Fireworks, Beach & Snow, Self
shot, Food, Cafe
ŋContinuous : Single, Continuous, AEB, Motion
Capture, Wise Shot
ŋSelf-timer : 10 sec., 2 sec., Double (10 sec. & 2 sec.)
ŝ107Ş
Specification
- Movie Clip : ŋSize : 800x592, 640x480, 320x240
(with sound recording)
ŋFrame rate : 30fps, 15fps
(20 fps in 800X592 image size)
ŋColor Effect : Normal, B&W, Sepia, Red, Green,
Blue, Negative, Custom Colour
ŋMovie Stabiliser (user selectable)
ŋMovie Editing (Embedded) :
Pause during recording, Still Image Capture, Time
Trimming
Storage
- Media : ŋInternal memory : About 450MB
ŋExternal memory : MMC plus : Max. 2GB guaranteed
SD / SDHC : Max. 4GB guaranteed
* Internal memory capacity is subject to change without
prior notice.
- File Format : Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1,
PictBridge 1.0
Movie Clip : AVI (MPEG-4)
Audio : WAV
- Capacity (MMC 256MB)
Super Fine
Fine
Normal
3072x2304 3072x2048 3072x1728 2592x1944 2048x1536 1024x768
63
74
89
88
131
381
116
137
166
162
236
520
171
192
229
223
318
600
ſ These figures are measured under Samsung’s standard conditions and may
vary depending on shooting conditions and camera settings.
ŝ108Ş
Image Play
- Type : Single image, Thumbnail, Slide show (Effect, B.G.M),
Movie
Multi Media
World Tour Guide, MP3, PMP, Text Viewer, Storage Device, Voice
Recorder
Interface
- Digital output connector : USB 2.0
- Audio : Mono
- Video output : NTSC, PAL (user selectable)
- DC power input connector : 24-pin connector
Power Source - Rechargeable battery : Lithium Ion (SLB-1137C, 1100mAh, 3.7V)
- Charger : SAC-45, SUC-C2
ſ Included battery type may vary depending on sales region.
Dimensions (WxHxD)
100.5 X 60.4 X 22.2 mm
Weight
186g (without battery & card)
- Operating Temperature : 0 ~ 40ŭC
- Operating Humidity : 5 ~ 85%
Software
Digimax Converter, Digimax Master, Adobe Reader
Specification
ſ MP3 Specification
ſ Text Specification
Audio
File
- TXT extension name, up to 99999 pages
File format
- Window : ANSI (Windows 98 or later), Unicode / Unicode (BigEndian) / UTF-8 (Windows 2000/XP)
- Mac : ANSI, Unicode (UTF-16)
Function
- Auto Scroll (0.8 sec ~ 2.3 sec)
- Skipping by 1 page / 10 pages
- Auto reload function (Remember last page)
- Support MP3 BGM during displaying text file
Language
- English, Korean, French, German, Spanish, Italian, Chinese,
Taiwanese, Japanese, Russian, Portuguese, Dutch, Swedish,
Finnish, Bahasa, Czech, Polish, Hungarian, Turkish
* Supportable language is subject to change without prior notice.
File
- Frequency : 20Hz ~ 20KHz
- Earphone Port : 2.5mm Port (Stereo Type)
- Output : Maximum Volume Left 40mW + Right 40mW (16ѳ)
- Noise Ratio : 88 dB with 20 KHz LPF
- File Format : MP3 (MPEG-1/2/2.5 Layer 3)
- Bit Rate : 48 ~ 320kbps (Including VBR)
Sound Effect - SRS WOW HD, Normal, Live, Classic, Jazz, Rock, Dance
Play Mode
- All, Repeat One, Repeat All, Random, Random Repeat
- Slide Show selectable
- Skipping in Play, Auto Skipping
- MP3&Capturing (Capturing Mode is Auto Default, 3M)
- Auto reload function (Remember both the last played file and frame)
- Background skin of MP3 playback using user images
ſ Specifications are subject to change without prior notice.
ſ All trademarks are the property of their respective owners.
ſ PMP Specification
PMP Decoder - Movie : Xvid MPEG4 (Digimax Convert S/W)
- Audio : MPEG Layer 2 (Digimax Convert S/W)
Play Mode
- Seeking in Play (Max 32X), Skipping in Play
- Auto skipping after one file played
- Auto reload function (Remember last played frame)
- Support Full Screen in Converting S/W
Subtitle
- Support SMI file (Using Digimax Converter S/W)
ŝ109Ş
Software Notes
About the software
Please ensure that you read the software instructions carefully before use.
ŋThe attached software is a camera driver and image editing software tool for Windows.
ŋUnder no circumstances should all or part of either the software or the user
manual be reproduced.
ŋCopyrights for software are licensed only for use with a camera.
ŋIn the unlikely event of a manufacturing fault, we will repair or exchange your
camera. We cannot, however, be held responsible in any way for damage
caused by inappropriate use.
ŋUsing a Hand-made PC or a PC and OS that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
ŋBefore reading these instructions, you should have a basic knowledge of
computers and O/S (Operating Systems).
System Requirements
For Windows
PC with processor better than Pentium II
450MHz (Pentium 800MHz recommended)
Windows 98SE/2000/ME/XP/Vista
Minimum 128MB RAM (Over 512MB
recommended)
200MB of available hard disk space
1024x768 pixels, 16-bit colour
display compatible monitor
(24-bit colour display recommended)
Microsoft DirectX 9.0
ҭDigimax Converter
PC with processor better than
Pentium III 500MHz
(Pentium ю recommended)
Windows 2000/XP/Vista
ŝ110Ş
For Macintosh
Power Mac G3 or later / Intel Processor
Mac OS 10.1 ~ 10.4
Minimum 256MB RAM
110MB of available hard-disk space
CD Rom
USB Port
ҭFor playing back a movie clip
MPlayer
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
ſ Screen Captures illustrated in this manual
is based on English Edition of Windows.
ƈ Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver for
MAC is not included with the Application CD. You can use the camera with Mac
OS 10.1 ~ 10.4.
ƈ XviD codec : This makes movie clips (MPEG-4) recorded with this camera
play back on a PC.
To play back a movie clip recorded with this camera, you must install the XviD
codec. If a movie clip recorded with this camera does not play well, install this
codec. This software is only compatible with Windows.
ƈ Digimax Converter : Multimedia converting program
Multimedia (Movie, Video clip, etc) files can be converted into movie clips that
can be played back on this camera. This software is only compatible with
Windows.
About the software
ƈ Digimax Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie clips with
this software. This software is only compatible with Windows.
Setting up the application software
ƈ To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
ƈ You can visit the Samsung web-site through the internet.
INFORMATION
ƃ Be sure to check the system requirements before installing the driver.
ƃ You should allow 5 ~ 10 seconds for running the automatic setup program.
If the frame does not show, run the [Windows Explorer] and select
[Installer.exe] in the CD-ROM Drive root directory.
ƃ PDF documents of user manual are included in the Software CD-ROM
supplied with this camera. Search the PDF files with Window's explorer.
Before opening the PDF files, you must install the Adobe Reader included in
the Software CD-ROM.
ƃ To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later
had to be installed. Visit "www.microsoft.com" and upgrade the Internet
Explorer.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display.
Click the [Install] menu in the Auto run frame.
2. Install the camera driver and DirectX by selecting a button shown on the monitor.
ŝ111Ş
Setting up the application software
3. To play back the movie clip recorded with this camera on the computer, install
the XviD codec.
ſ The XviD codec is distributed according to and under the terms and conditions of
the GNU General Public License and everyone can copy, modifiy and distribute
this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR EXPRESSED,
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE;
provided, however, that you have to follow the GNU General Public License
whenever you are distributing this codec or modification thereof.
For more information see the GNU General Public License documents
(http://www.gnu.org/copyleft/gpl.html).
ŝ112Ş
4. Install the software following instructions on the monitor.
Setting up the application software
5. After restarting the computer, connect the PC
to the camera with the USB cable.
6. Turn the camera power on.
The [Found New Hardware Wizard] will open
and the computer will recognize the camera.
ſ If your OS is Windows XP, an image viewer
program will open.
If the download window of Digimax Master opens after starting Digimax
Master, the camera driver was setup successfully.
Starting PC mode
ƃ In this mode, you can download stored images to your PC through the USB
cable.
ƃ The LCD monitor is always turned off in PC mode.
ƈ Connecting the camera to a PC
1. Connect the PC to the camera with the USB
cable.
2. Select the [Computer] menu.
Select USB
Computer
Printer
INFORMATION
ƃ If you have installed the camera driver, The [Found New Hardware Wizard]
may not open.
ƃ On a Windows 98 SE system, the Found New Hardware Wizard dialog box
opens and a window asking you to select a driver file may appear. In this
case, specify "USB Driver" in the CD supplied.
ſ If you selected [Printer] in Step 2, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established. In this case, disconnect the USB cable, and then follow
the procedure from Step 1 and onward.
ŝ113Ş
Starting PC mode
ƈ Disconnecting the camera and PC : Refer to "Removing the Removable Disk"
(p.115)
3. Select an image and press the right mouse
button.
INFORMATION
ƃ Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
Removable Disk
ƈ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My Computer] and double click [Removable
Disk ƍ DCIM ƍ 100SSCAM].
ŝ114Ş
7. An image file is transferred from the camera to
your PC.
Removable Disk
CAUTION
ƃ We recommend that you should copy the images to the PC to view them.
Opening images directly from the removable disk may be subject to
unexpected disconnection.
ƃ When you upload a file that is not taken by this camera to the Removable
Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.
Removing the removable disk
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double Click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage Device]
and click the [OK] button.
ƈ Windows 98SE
1. Check whether the camera and PC are transferring a file. If the camera status
lamp blinks, please wait until the lamp has finished blinking and is constantly on.
2. Unplug the USB cable.
ƈ Windows 2000 / ME / XP / Vista
(The illustrations may differ from those shown depending on the Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk may be removed safely.
7. Unplug the USB cable.
ŝ115Ş
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 10.1 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to
the MAC.
Removing the USB Driver for Windows 98SE
ƈ To uninstall the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
2. Select an image file and copy or move it to MAC.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add / Remove Programs
Properties.
INFORMATION
ƃ For Mac OS 10.1 or later : First complete uploading from computer to
camera and then remove the removable disk with the Extract command.
ƃ If a movie clip can’t play back on the Mac OS, please visit the following
site(http://www.divx.com/divx/mac/) and download the codec. Or, use a
media player that supports the Xvid codec (Mplayer).
6. Uninstallation is complete.
ŝ116Ş
Digimax Converter
ƈ Multimedia (Movie, Video clip, etc) files can be converted into movie clips that
can be played back on this camera. This software is only compatible with
Windows.
ƈ How to use the Digimax Converter
1. Double click the Digimax Converter icon
(
) on the desktop.
2. Click the Add icon (
) and select a file that
you want to add.
3. If you want to add a caption, check "Use subtitles
from file (*.smi)".
4. Select settings that you want and click the
Convert button.
- Frame size : You can set the width and height of output movie clip.
- Frame rate : You can set fps (Frame Per Second).
- Screen size : You can set type of display.
- Split by size : You can set the file size of output movie clip.
5. Connect the camera to the computer with the supplied USB cable.
6. Copy the converted movie clip in the destination
folder and paste the file in the [PMP] folder.
7. You can play back the converted movie clip
in the Play mode of the camera.
CJ-movie sample.sdc
0:00:00 / 0:04:55
ſ Refer to the [Help] menu in Digimax
Converter for further information.
Who bend my camera
INFORMATION
ƃ Before converting a multimedia file, check whether it plays back correctly on
the Windows Media Player.
ƃ The converted files are saved as *.sdc file type that can be played back on
the Windows Media Player.
ƃ The Digimax Converter doesn't cover every kind of codec. If a multimedia
file can't play back on the Windows Media Player, install a multicodec (We
recommend Full version of latest K-Lite Codec). Install the Digimax
Converter again after installing the multi-codec.
ƃ You can select destination folder of each converted file. When the folder is
not selected, the converted files are saved on a folder where the source
file is.
ƃ If you convert several files at the same time, the computer may be running
slow because of the CPU capacity. In this case, add the files in the program
one by one.
ƃ Computer specification, installed code and programs are the main causes
of converting error. When a converting error happens, please check the
following.
- Any codecs compatible with the files were not installed or installed
incorrectly. In this case, find a compatible codec and install it. If you do not
find any compatible codecs, install a multi-codec.
ŝ117Ş
Digimax Converter
INFORMATION
- If you installed various multi-codecs on your computer, it may cause
converting problems. In this case, remove all codecs and install a proper
multi-codec.
- Install a latest Windows Media Player.
- Visit device (PC, Graphic card, Sound card) manufacturer web-site and
upgrade them with the latest version.
ƃ Some kinds of multimedia files are not converted.
If the converted media files are damaged, they may not play back on the
camera. Unusual type of files may not be converted. The sound and scenes
may not synchronise.
ƃ The expected file sizes after converting a media file may vary. It depends on
the computer system you use.
ƃ If there is no font that is compatible with the script file on your PC, the script
is shown as '
'.
ƃ Transferring the converted file to a removable disk is time consuming.
It may take a long time. The duration depends on the file size.
ƃ Do not use the PMP mode while driving. It may create a traffic hazard.
ƃ A file that does not support fast search on the Windows Media Player can't
select converting range and divide file size.
ŝ118Ş
Digimax Master
ƈ You can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows.
ƈ To run the Digimax Master, double click the Digimax Master icon on the desktop.
ƃ Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display
after connecting the camera to your PC.
- To download the captured images, select the
[Select All] button.
- Select desired folder in the window and click the
[Select All] button. You can save captured
images and selected folder.
- If you click the [Cancel] button, downloading will
be cancelled.
3. Click [Next >] button.
Digimax Master
4. Select a destination and make a new folder in
which to save downloaded images and folders.
- Folder names can be made in order of date
and images will be downloaded.
- Folder name will be made as you want and
images will be downloaded.
- After selecting a folder that was made before,
images will be downloaded.
ƃ Image viewer : You can view the stored images.
‫ڹ‬
‫ڽ‬
‫ھ‬
‫ڿ‬
‫ں‬
‫ڻ‬
5. Click [Next >] button.
‫ڼ‬
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the images.
7. Downloaded images will be displayed.
- Image viewer functions are listed below.
‫ ڹ‬Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
‫ ں‬Image selection window : You can select the desired images in this window.
‫ ڻ‬Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
‫ ڼ‬Preview window : You can preview an image or a movie clip and check the
multi media information.
‫ ڽ‬Zoom bar : You can change preview size.
‫ ھ‬Folder display window : You can see the folder location of the selected image.
‫ ڿ‬Image display window : Images in the selected folder are displayed.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ119Ş
Digimax Master
ƃ Image edit : You can edit the still image.
ƃ Movie edit : You can get the still image, movie clip, narration, music files together
in a movie clip.
‫ڹ‬
‫ڼ‬
‫ڹ‬
‫ں‬
‫ں‬
‫ڻ‬
- Image edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Tools]
: You can resize or crop the selected image. See the [Help] menu.
[Adjust]
: You can modify image quality. See the [Help] menu.
[Retouch] : You can change the image or add effects to the image.
See the [Help] menu.
‫ ں‬Drawing tools : Tools for editing an image.
‫ ڻ‬Image display window : A selected image displays in this window.
‫ ڼ‬Preview window : You can preview the changed image.
ſ A still image edited with Digimax Master can’t be played back on the camera.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ120Ş
- Movie clip edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate]
: You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
* You can select AVI, Windows media (wmv) and Windows
media (asf) file types.
‫ ں‬Frame display window : You can insert multi media in this window.
ſ Some movie clips that were compressed with a codec that is not compatible with
the Digimax Master can’t play back in the Digimax Master.
ſ Refer to the [Help] menu in Digimax Master for further information.
FAQ
ƈ Please check the following if the USB connection malfunctions.
Case 1
The USB cable is not connected or you are using a cable with an
incorrect specification.
ƍ Use a USB cable with the correct specification.
Case 2
The camera is not recognized by your PC. Sometimes, the camera
may appear under [Unknown Devices] in Device Manager.
ƍ Install the camera driver correctly. Turn off the camera, remove the
USB cable, plug in the USB cable again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer
ƍ Turn the camera power off and on again. Transfer the file again.
Case 4
When using the USB hub.
ƍ There may be a problem in connecting the camera to the PC through
a USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera directly to the PC.
Case 5
Are other USB cables connected to the PC?
ƍ The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this instance, disconnect the
other USB cable so that only the camera's USB cable is connected to
the computer.
Case 6
When I open the Device Manager (by clicking Start ƍ (Settings) ƍ
Control Panel ƍ (Performance and Maintenance) ƍ System ƍ
(Hardware) ƍ Device Manager), there areşUnknown DevicesŠ
şOther DevicesŠentries with a yellow question mark(?) beside them
or devices with an exclamation mark(!) beside them.
ƍ Double-click on the entry with the question (?) or exclamation (!)
mark, and remove them (Click the right mouse button and ‘Remove’
menu will display). Re-boot your computer and connect the computer
and the camera. In Windows 98SE, remove the camera driver and reboot the computer. And then connect the computer and the camera.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
ƍ Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to stop the
program.
Case 8
The camera is connected to the USB port located on the front of the
computer.
ƍ When the camera is connected to the USB port located on the front of
the computer, the computer may not recognise the camera.
Connect the camera to the USB port located on the back of the
computer.
ŝ121Ş
FAQ
ƈ When the movie clip doesn’t play back on the PC
ſ When the movie clip recorded by the camera doesn’t play back on the PC,
the causes are mostly due to the codec installed on the PC.
ƃ When codec for play back the movie clip isn’t installed
ƍ Install the codec as listed below.
[Installing codec for Windows]
1) Insert the CD provided with the camera.
2) Run the windows explorer and select [CD-ROM drive:\XviD] folder and
click the XviD-1.1.2-01112006.exe file.
ſ The XviD codec is distributed according to the GNU General Public License
and everyone can copy, distribute and change this codec. This License
applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General
Public License.
For more information, see the License documents
(http://www.gnu.org/copyleft/gpl.html).
[Installing codec for Mac OS]
1) Visit the following site for downloading the codec.
(http://www.divx.com/divx/mac)
2) Click the [Free Download] button located at the upper right side of the page
and a window for downloading the DivX codec will display.
3) Select Mac OS you use and click the [Download] button. Save it to a
suitable folder.
4) Run the downloaded file and the codec for playing back the movie clip will
be installed.
ſ If a movie clip can’t play back on the Mac OS, use a media player that
supports XviD codec (Mplayer).
ŝ122Ş
ƃ When the DirectX 9.0 or later is not installed
ƍ Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXESETUP.exe file.
The DirectX will be installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx
ƃ If a PC (Windows 98SE) stops responding while the camera and PC are
connected repeatedly
ƍ If a PC (Windows 98SE) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera. In this case,
re-start the PC.
ƃ If a PC connected with the camera stops responding while Windows is starting.
ƍ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact the PC manufacturer or BIOS manufacturer.
ƃ If the movie clip can’t be deleted, or the removable disk can’t be extracted or an
error message displays during the file transfer.
ƍ If you install only the Digimax Master, the problems mentioned above
occasionally happen.
- Close the Digimax Master program by clicking the Digimax Master icon on
the Taskbar.
- Install all the application programs included in the software CD.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
FCC notice
ƈ NOTE :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not in-stalled and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
ƈ CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
Samsung Techwin cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents
Samsung Techwin’s will to create environment-friendly
products, and indicates that the product satisfies the EU
RoHS Directive.
ƈ Declaration of Conformity
Trade Name
: SAMSUNG TECHWIN
Model No.
: Samsung i7
Responsible Party : Samsung Opto-Electronics America, INC.
Address
: 40 Seaview Dr. Secaucus, NJ 07094
Telephone No.
: 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
ŝ123Ş
MEMO
ŝ124Ş
MEMO
SAMSUNG TECHWIN CO., LTD.
SAMSUNG FRANCE S.A.S.
SAMSUNG OPTO-ELECTRONICS UK LIMITED
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099
FAX : (82) 31-740-8398
www.samsungcamera.com
BP 51 TOUR MAINE MONTPARNASSE 33,
AV .DU MAINE 75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2200
FAX : (33) 1-4320-4510
www.samsungphoto.fr
SAMSUNG HOUSE 1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
SAMSUNG OPTO-ELECTRONICS GMBH
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS,
NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5284/5285
FAX : (1) 310-537-1566
www.samsungcamerausa.com
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : 49 (0) 6196 66 53 03
FAX : 49 (0) 6196 66 53 66
www.samsungcamera.de
RUSSIA INFORMATION CENTER
SAMSUNG ELECTRONICS
117545 ST. DOROZHNAYA BUILDING 3,
KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA
TEL : (7) 495-363-1700
CALL FREE : (8) 800 200 0 400 (from Russia only)
www.samsungcamera.ru
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD
No.9 zhangheng Street. Micro-Electronic
Industrial Park Jingang Road Tianjin China.
POST CODE : 300385
TEL : (86) 22-2761-4599
FAX : (86) 22-2769-7558
www.samsungcamera.com.cn
Internet address - http : //www.samsungcamera.com
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-3916
Download PDF

advertising