Samsung | i8 | Samsung i8 User Manual

Instructions
Getting to know your camera
Use this camera in the following order.
Thank you for buying a Samsung Digital Camera.
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.118~121)
Insert the USB cable
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.122)
Check the camera’s power
Check the camera’s power. If the
power is turned off, press the camera
button to turn it on.
Prior to using this camera, please read this user manual thoroughly.
If you require After Sales service, please bring the camera and the cause
of the camera malfunction (such as battery, Memory card etc.) to the A/S
centre.
Please check that the camera is operating properly prior to when you intend
to use it (e.g. for a trip or an important event) to avoid disappointment.
Samsung camera takes no responsibility for any loss or damages that may
result from camera malfunction.
Keep this manual in a safe place.
The contents and illustrations of this manual are subject to change without
prior notice for upgrading the camera functions.
If you use a card reader to copy the images on the memory card to your
PC, the images could be damaged. When transferring the images taken
with the camera to your PC, be sure to use the supplied USB cable to
connect the camera to your PC. Please note that the manufacturer accepts
no responsibility for loss or damage of images on the memory card due to
the use of a card reader.
Check [Removable Disk]
Open Windows EXPLORER and
search for [Removable Disk]. (p.124)
Microsoft, Windows and Windows logo are registered trademarks of
Microsoft Corporation incorporated in the United States and/or other
countries.
Set up the camera driver
Take a picture
Take a picture. (p.20)
is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.
All brand and product names appearing in this manual are registered
trademarks of their respective companies.
001
DANGER
WARNING
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Do not attempt to modify this camera in any way. This may result in fire,
injury, electric shock or severe damage to you or your camera. Internal
inspection, maintenance and repairs should be carried out by your dealer
or Samsung Camera Service centre.
Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use
it. Switch off the camera, and then disconnect the power source. You must
contact your dealer or Samsung Camera Service centre. Do not continue
to use the camera as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the
camera through access points e.g. the memory card slot and battery
chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk of
electric shock.
002
Do not use the flash in close proximity to people or animals. Positioning
the flash too close to your subject’s eyes may cause eyesight damage.
For safety reasons keep this product and accessories out of reach of
children or animals to prevent accidents e.g.:
– Swallowing battery or small camera accessories. If an accident should
occur, please consult a doctor immediately.
– There is the possibility of injury from the camera’s moving parts.
Battery and camera may become hot during prolonged use which might
result in camera malfunction. Should this be the case, allow the camera to
sit idle for a few minutes to allow it time to cool.
Do not leave this camera in places subject to extremely high temperatures,
such as a sealed vehicle, direct sunlight or other places of extreme
variances in temperature. Exposure to extreme temperatures may
adversely affect the camera’s internal components and could cause a fire.
When in use, do not cover the camera or Charger. This may cause heat
to build up and distort the camera body or cause a fire. Always use the
camera and its accessories in a well-ventilated area.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
Leaking, overheating, or burst battery could result in fire or injury.
– Use battery with the correct specification for the camera.
– Do not short circuit, heat or dispose of battery in fire.
– Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a long period
of time. Battery may leak corrosive electrolyte and permanently damage
the camera’s components.
Do not fire the flash while it is in contact with hands or objects. Do not
touch the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fire or electric shock.
Take care not to touch the lens or lens cover to avoid taking an unclear
image and possibly causing camera malfunction.
Avoid obstructing the lens or the flash when you capture an image.
When using this camera in low temperatures, the following cases may be
found. These are not camera malfunctions and usually recover at normal
temperature.
– It takes more time to turn on the LCD monitor and the colour may differ
from the subject.
– When changing the composition, there may be an after image on the
LCD monitor.
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
It is highly likely to result in computer malfunctions when the 20 pin
connector is connected to the USB port of a PC. Never connect the 20 pin
connector to USB port of a PC.
Contents
READY
007
System chart
008
Identification of features
012
015
015
016
Connecting to a power source
Inserting the battery
Inserting the memory card
Instructions on how to use the
memory card
When using the camera for the first
time
007
007
008
009
010
010
018
RECORDING
019
020
020
020
021
021
021
022
023
023
023
Package Contents
Sold Separately
Front & Top
Back
Bottom
5 Function button
LCD monitor indicator
Starting the Recording mode
Selecting modes
How to use the Auto mode
How to use the Program mode
How to use the DIS(Digital Image
Stabilization) mode
How to use the FUN mode
Using the Photo Help guide mode
How to use the Movie clip mode
Recording the movie clip without sound
Pausing while recording a movie clip
(Successive Recording)
003
Contents
024
025
026
026
026
027
027
029
030
031
032
034
036
037
037
038
038
039
039
040
040
041
042
043
043
044
044
045
045
004
How to use the Scene modes
Things to watch out for when taking
pictures
Focus lock
Using the camera buttons to set the
camera
POWER button
Shutter button
FD (Face Detection) button
ZOOM W / T button
Function Description / Info / Up button
Macro / Down button
Flash / Left button
Self-timer / Right button
MENU / OK button
Fn button
How to use the Fn menu
Fn button: Size
Fn button: Quality / Frame rate
Fn button: Metering
Fn button: Drive mode
Fn button: ISO
Fn button: White balance
Fn button: Exposure compensation
Fn button: Long time shutter
E (Effect) button
E (Effect) button: Photo Style Selector
E (Effect) button: Image editing
Colour
Saturation
Contrast
045
046
048
049
051
052
Sharpness
E (Effect) button: Cartoon
E (Effect) button: Pre-set focus frame
E (Effect) button: Composite shooting
E (Effect) button: Photo Frame
E (Effect) button: Colour Mask
053
Using the LCD monitor to adjust the
camera settings
053
054
054
055
056
PLAY
Focus Area
ACB
Voice Memo
Voice recording
Recording the movie clip without voice
056
Starting play mode
059
060
LCD monitor Indicator
Using the camera buttons to set the
camera
056
057
057
058
058
059
060
060
062
062
063
063
Playing back a still image
Playing back a movie clip
Movie clip capture function
On camera movie trimming
Playing back a recorded voice
Playing back a voice memo
Play mode button
Thumbnail / Enlargement button
Info / Up button
Play & Pause / Down button
Left / Right / Menu / OK button
Print button
Contents
SETUP
063
064
065
065
066
066
066
067
067
067
067
068
068
069
070
071
073
073
074
Delete button
E (Effect) button: Resize
E (Effect) button: Rotating an image
E (Effect) button: Colour
E (Effect) button: Image editing
ACB
Red eye removal
Brightness control
Contrast control
Saturation control
Noise effect
E (Effect) button: FUN
Cartoon
Photo Frame
Preset focus frames
Composite image
Sticker
Colour Filter
Colour mask
075
Setting up the play back function
using the LCD monitor
076
076
077
077
078
078
079
079
079
079
Starting the slide show
Start the slide show
Selecting Images
Configure slide show effects
Setting play interval
Setting Background Music
Playback
Voice memo
Protecting images
Deleting images
080
082
083
084
Sound menu
Sound
085
086
Setup menu
SETUP1
088
SETUP2
084
084
084
084
084
084
086
086
087
087
087
087
088
088
089
090
090
091
092
PRINT
DPOF
Copy To Card
092
093
094
094
Volume
Start up sound
Shutter sound
Beep Sound
AF sound
Self Portrait
Language
Setting up the Date / Time / Date type
Start up image
LCD brightness
Quick view
LCD save
Formatting a memory
Initialisation
File name
Imprinting the recording date
Auto power off
Selecting video out type
Auto focus lamp
PictBridge
PictBridge: Picture Selection
PictBridge: Print Setting
PictBridge: Reset
005
Contents
MULTIMEDIA
095
MP3 / PMP / TEXT VIEWER mode
105
106
096
Starting the MP3 / PMP / TEXT
VIEWER mode
LCD monitor indicator for MP3 / PMP
/ TEXT VIEWER mode
Using the camera buttons to adjust
the camera
108
110
111
113
Important notes
Warning indicator
Before contacting a service centre
Specifications
116
117
117
118
122
124
125
125
126
Software notes
System requirements
About the software
Setting up the application software
Starting PC mode
Removing the removable disk
Setting up the USB Driver for MAC
Using the USB Driver for MAC
Removing the USB Driver for
Windows 98SE
Samsung Converter
Samsung Master
FAQ
095
098
099
099
099
099
100
100
101
102
102
102
103
103
103
103
104
104
104
104
105
105
105
006
Downloading files
Volume button
Play & Pause / Seeking button
Delete button
Hold / Equalizer button
Playlist button
Setting up the playback function
using the LCD monitor
Resume
Play mode
Skin of MP3 player
Playing back the slide show
Setting slide show interval
Delete all
Frame search
Display setting
Information of DRM file
Setting up the recording function in the
MP3 mode
Auto Scroll
MP3 BGM Setting
Language setting
World tour guide
SOFTWARE
126
128
131
Download the tour guide information
World Tour Guide mode
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the
optional equipment, contact your nearest Samsung dealer or Samsung service centre.
Package Contents
Camera
User manual,
Product warranty
Camera strap
AV cable
AC adapter ( SAC-47)/
USB cable (SUC-C3)
Software CD
(see p.117~118)
Earphones
20 Pin Gender
Rechargeable battery
(SLB-0937)
Sold Separately
SD/SDHC memory card/
MMC(see p.17)
Camera case
007
Identification of features
Front & Top
POWER button
Microphone
Shutter button
FD (Face Detection) button /
MP3, PMP hold button
Speaker
Flash
AF sensor/
Self-timer lamp
008
Lens
Identification of features
Back
Zoom T button (Digital zoom)
Camera status lamp
LCD monitor
Zoom W button
(Thumbnail)
Camera strap
Open
M (Mode) button
Fn / Delete button
Close
USB / AV / DC / Earphones
connection terminal
5-function button
E (Effect) button
Play mode /
Print button
009
Identification of features
Bottom
5 Function button
Battery chamber slot
Function Description / Information / Up button
Flash/
Left button
Self-timer/
Right button
MENU/OK button
Tripod socket
Memory card slot
Battery chamber cover
010
Battery holder
Macro/Play & Pause/
Down button
Identification of features
Self-timer lamp
Icon
Status
Description
Blinking
– For the first 8 seconds, the lamp blinks at 1
second intervals.
– For the final 2 seconds, the lamp blinks quickly
at 0.25-second intervals.
Blinking
For the 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Blinking
After pressing the Shutter button, the image is
taken in accordance with the subject’s movement.
When the USB cable is
inserted to a printer
When the printer is printing
When the AF activates
The lamp turns on.
(The camera is focused on the subject)
The lamp blinks.
(The camera doesn’t focus on the subject)
MODE
Program
DIS
FUN
SHOOTING
Camera Status Lamp
Status
Description
Power on
The lamp turns on, and off when the camera is
ready to take a picture.
After taking a picture
The lamp blinks while saving the image data
and turns off when the camera is ready to take
another picture.
Transmitting Data
with a PC
The lamp is off.
Mode icon: Refer to page 20 for more information about the
camera mode setting.
Auto
When the USB cable is
inserted to a PC
The lamp blinks and turns off when the printer
is ready to print a picture.
Nightscene Portrait Children Landscape
SCENE
Dawn
Back
light
Fire
works
Beach
&Snow
Photo
Help Guide
Text
Selfshot
Movie
Close-up Sunset
Food
Cafe
The lamp lights up. (LCD monitor turns off
after initializing the device)
The lamp blinks. (LCD monitor turns off)
MULTIMEDIA
MP3
PMP
TEXT VIEWER
Travel Guide
011
Connecting to a power source
You should use the rechargeable battery SLB-0937 supplied with the
camera. Be sure to charge the battery before using the camera.
SLB-0937 rechargeable battery Specification
Model
SLB-0937
Type
Lithium Ion
Capacity
900mAh
Voltage
3.7V
Charging time
(When the camera is turned off)
MP3
Approx. 150 MIN
Number of images and battery life: Using the SLB-0937
Battery life
/Number of
images
012
Still image
Approx. 120
MIN/
Approx. 240
shots
Movie
Approx. 120
MIN
Conditions
Using the fully charged battery, Auto
mode, 8M image size, Fine image
quality, Shot to shot interval: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then Powering it off for 1 minute.
Using the fully charged battery 640x480
image size 30fps frame rate
Multimedia
PMP
Battery life
/Number of
images
Approx. 300
MIN
Approx. 220
MIN
Conditions
Using the fully charged battery LCD Off.
Using the fully charged battery
These figures are measured under Samsung’s standard conditions and
shooting conditions and may vary depending on the user’s methods.
Important information about battery usage.
When the camera is not used, turn off the camera power.
Please remove the battery if the camera will not be used for long
periods. Batteries can lose power over time and are prone to
leaking if kept inside the camera.
Low temperatures (below 0°C) can affect the performance of the
battery and you may experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may
become warm. This is perfectly normal.
When you use earphones, do not remove the battery while the
camera is turning on. It may generate a loud noise.
Connecting to a power source
You can charge the rechargeable battery (SLB-0937) by using the
SAC-47 KIT which consists of the AC adapter (SAC-47) and the USB
cable (SUC-C3).
When the SAC-47 and SUC-C3 are combined, they can be used as an
AC cable.
Using an AC cable:
Connect the AC adapter to the
USB cable.
It can be used as a power cable.
Important information about USB cable usage.
Use a USB cable (SUC-C3) with the correct specification.
If the camera is connected to the PC through a USB hub:
connect the camera directly to the PC.
If the camera and other devices are connected to the PC at
the same time: remove other device.
If the USB cable is connected to a port located on the front
of the PC: remove the cable and connect it to a port located
on the back of the PC.
If the USB port of the PC doesn’t meet the Power output
standard (4.2V, 400mA), the camera may not be charged.
Using a USB cable:
Remove the AC adapter (SAC-47).
You can download stored images to
your PC (p.123) or supply the power
to your camera through the USB
cable.
013
Connecting to a power source
How to charge the rechargeable battery (SLB-0937)
Charging LED of the AC Adapter
Charging LED
Being Charged
Before inserting any cables or AC adapter, check the directions
and do not insert by force. It may cause breakage of cable or
camera.
If the charging LED of the AC Charger does not turn on or blink
after inserting the rechargeable battery, please check whether
the battery is inserted correctly.
If you charge the battery with the camera power on, the battery
can’t charge fully. Turn the camera off while charging the
battery.
014
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on
– If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. This is because of the low battery capacity.
Charge the battery for more than 10 minutes before using the camera.
– Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger is inserted,
the camera power may be turned off because the rechargeable battery is
discharged again.
Inserting the battery
Inserting the memory card
Insert the battery as shown.
Insert the memory card as shown.
– If the camera does not turn on
after you have inserted battery,
please check whether the battery
is inserted with the correct
polarity (+/-).
– When opening the battery
chamber cover, do not force it.
This may cause damage to the
battery chamber cover.
- Turn off the camera’s power
before inserting the memory
card.
- Have the front of the memory
card facing toward the back of
the camera (LCD monitor) and
the card pins toward the front of
the camera (Lens).
- Do not insert the memory card
the wrong way round.
Doing so may damage the memory card slot.
There are 4 indicators for battery condition that are displayed
on the LCD monitor.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Battery empty.
Recharge or
use spare
battery.
015
Instructions on how to use the memory card
Be sure to format the memory card (see p.88) if you are using a newly
purchased memory for the first time, or if it contains data that the camera
cannot recognise, or if it contains images captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or
removed.
Repeated use of the memory card will eventually reduce the memory
card’s performance. Should this be the case, you will need to purchase a
new memory card. Wear and tear on the memory card is not covered by
the Samsung warranty.
The memory card is an electronic precision device. Do not bend, drop or
subject the memory card to any heavy impact.
Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in
temperature.
Do not allow the memory card to become dirty or to come into contact with
any liquid. Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory
card is warm. This is perfectly normal.
Do not use a memory card that is used in another digital camera. To
use the memory card in this camera, format the memory card using this
camera.
Do not use a memory card formatted by another digital camera or memory
card reader.
016
If the memory card is subjected to any of the following, the recorded data
may become corrupted:
– When the memory card is used incorrectly.
– If the power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g.
floppy disks, hard disks, CD etc.
If there is insufficient memory available:
A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory
card or delete unnecessary images stored on the memory card.
Don’t remove the memory card when the camera status lamp
is blinking as this may cause damage to data in the memory
card.
Instructions on how to use the memory card
The camera can use SD/ SDHC Memory Cards and MMC (Multi Media
Cards).
Card pins
When using a 256MB MMC memory, the specified shooting capacity will
be as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
Recorded
image size
Write protect
switch
Label
Still
image
<SD (Secure Digital) memory card>
The SD/ SDHC memory card has a write protect switch that prevents image
files from being deleted or formatted. By sliding the switch to the bottom of the
SD memory card, the data will be protected. By sliding the switch to the top of
the SD memory card, the data protection will be cancelled.
Slide the switch to the top of the SD memory card before taking a picture.
* Movie
clip
Super
Fine
Fine
Normal
30FPS
20FPS
15FPS
53
94
135
–
–
–
60
107
171
–
–
–
71
133
202
–
–
–
86
161
220
–
–
–
134
226
306
–
–
–
434
520
600
–
–
–
–
–
–
–
–
About
8’31”
–
–
–
About
8’58”
–
About
16’59”
–
–
–
About
28’56”
–
About
53’31”
* The recording times can be changed by the zoom operation.
The zoom button doesn’t function during the movie recording.
017
When using the camera for the first time
Charge the rechargeable battery fully before using the camera for the first
time.
When the camera is turned on for the first time, a menu will be displayed
to set date/time, language and battery type in the LCD monitor. This menu
will not be displayed after setting up. Set up the date/time, language and
battery type before using this camera.
Setting up the language
1. Select the [Language] menu by pressing
the Up/Down button and press the
SETUP1
Language
ENGLISH
Right button.
Date&Time
한국어
2. Select the desired sub menu by
FRANÇAIS
pressing the Up/Down button and press
DEUTSCH
ESPAÑOL
the OK button.
ITALIANO
– You can select one of 22 languages.
OK Set
Back
These are listed below:
English, Korean, French, German, Spanish, Italian, S.Chinese,
T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai, Bahasa (Malay / Indonesian), Arabic, Czech,
Polish, Hungarian and Turkish.
018
Setting up the date, time and date type
1. Select the [Date&Time] menu by
pressing the Up/Down button and press SETUP1
Language
the Right button.
London
Date&Time
2. Select the desired sub menu by
2008 / 01 / 01
12 : 00
pressing the Up/Down/Left/Right
yy/mm/dd
button and press the OK button.
Right button:
Selects world
OK Set
Back
time/year/ month/
day/hour/minute/date type
Left button:
Moves the cursor to the [Date&Time] main menu
if the cursor is at the first item of the date and time
setup. In all other instances, the cursor will be
shifted to the left of its current position.
Up/Down button: Changes the value of each item.
For more information about the World Time, refer to the page 86.
LCD monitor indicator
The LCD monitor displays information about the shooting functions and
selections.
①
②
③
X5.0
⑳
00016
④
⑤
⑲
⑱
⑥
⑰
⑦
⑯
⑧
⑨
⑮
⑭
⑩
01:00 PM
2008/01/01
⑬
⑪
⑫
No.
Description
1
Optical/Digital Zoom bar/
Digital Zoom rate
2
Number of available shots
remaining/Remaining time
00016/00:00:00
p.17
3
Memory card icon/
Internal memory icon indicator
/
-
4
Battery
Icons
Page
x 5.0
Icons
Page
5
Image Size
p.38
6
7
8
9
10
Image Quality/Frame Rate
Metering
Drive mode
ISO
White Balance
Exposure compensation
/LongTime Shutter
Date/Time
Saturation
Sharpness/Mic. off
Contrast
p.38
p.39
p.39
p.40
p.40
11
12
13
14
15
p.41/42
/ LT
2008/01/01 01:00 PM
/
p.86
p.45
p.45/23
p.45
16
Macro
p.31~32
17
18
Self-timer
Flash
p.35~36
p.32~34
19
Face Detection · Self
Portrait/Photo Style
Selector/Colour
20
Recording mode
p.11
21
Voice Memo
p.54
22
Auto Focus Frame
p.53
23
Camera shake Warning
p.21
<Image & Full Status>
No.
Description
/
/
p.27~28/
p.43/p.44
p.29
p.15
019
Starting the Recording mode
Selecting modes
How to use the Auto mode
You can select the desired working mode using the M (Mode) button
located on the back of the camera.
How to use the M (Mode) button
Select this mode for quick and easy picture taking with minimal user
interaction.
00016
01:00 PM
2008/01/01
SCENE
<Auto mode>
SHOOTING
<Pressing the
M(Mode) button>
Program
Directly set various features for shooting.
SCENE
<Pressing the Right button>
SHOOTING
MULTIMEDIA
<Program mode>
Auto
This mode minimizes user settings for
quick, convenient shooting.
SCENE
<Pressing the Left button>
MULTIMEDIA
<Mode selection menu>
Movie
In this mode, you can take a video.
<Pressing the
Up button>
MULTIMEDIA
SCENE
Nightscene
This mode is appropriate for photographing
at night (use of tripod is recommend
020
SHOOTING
MULTIMEDIA
<Movie Clip mode>
<Pressing the Right
button>
MULTIMEDIA
SCENE
Portrait
This mode is appropriate for
photographing people
SHOOTING
SHOOTING
<Scene mode>
<Selecting a scene mode>
1. Insert the battery (p.15) taking note of
00016
the correct polarity (+/-).
2. Insert the memory card (p.15). As this
camera has a 190MB internal memory,
it is not essential to insert the memory
card. If the memory card is not
01:00 PM
inserted, an image will be stored in the
2008/01/01
internal memory. If the memory card is
inserted, an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera. (If the date/time that
is displayed on the LCD monitor is incorrect, reset the date/time before
taking a picture.)
5. Select the Auto mode by pressing the M(Mode) button.
6. Point the camera towards the subject and compose the image.
7. Press the Shutter button to capture an image.
If the auto focus frame turns to red when you press the Shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is less
likely to capture an image clearly.
Avoid obstructing the lens or the flash when you capture an
image.
Starting the Recording mode
How to use the Program mode
Selecting the automatic mode will configure the camera with optimal
settings and you can manually configure various functions.
1. Select the Program mode by pressing
the M (Mode) button (p.20).
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
Refer to page 37-42 for more
information about the Program mode menus.
00016
01:00 PM
2008/01/01
How to use the DIS(Digital Image Stabilization) mode
This mode will reduce the effect of camera shake and help you get a
well exposed image in dim conditions.
1. Select the DIS mode by pressing the
M (Mode) button. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
00016
Things to watch out for using the DIS mode
– The digital zoom will not operate in the DIS mode.
– If the lighting conditions are brighter than fluorescent lighting conditions,
the DIS will not activate.
– If the lighting conditions are darker than in fluorescent lighting
conditions, camera shake warning indicator ( ) will be displayed. For
best results only take pictures in situations where the camera shake
warning indicator ( ) is not displayed.
– If the subject is moving, the captured image may be blurred.
– Avoid moving the camera while the [Capturing!] message is displayed
to achieve a better result.
– As the DIS uses the camera’s digital signal processor, it may take a
little longer for the camera to process and save the images.
– If the image size is ( ) or ( ) ,the DIS mode can’t be selected.
How to use the FUN mode
In this mode, you can take pictures with various effects easily and
simply.
Select the FUN mode by pressing the
M (Mode) button.
Refer to page 46-52 for more
information.
01:00 PM
2008/01/01
00016
01:00 PM
2008/01/01
021
Starting the Recording mode
Using the Photo Help guide mode
Helps the user learn the correct picture taking method and includes solutions
for potential problems that may occur. This also enables the user to practice
the best way to take the pictures.
Function that can be used when focusing is difficult
Available functions of the photo help guide
Function that can be used when focusing is difficult
Functions that can be used when the image is blurred
Function that can be used when filming in the dark
Function that can be used when adjusting the picture
brightness
Function that can be used when adjusting the picture colour
1/2
Guide List
Features to use when the image is ou
2. Features to counter camera shake
3. Features to use in low light conditions
4. Features to use when adjusting bright
5. Features to use when adjusting colours
Move
Pressing the
Left/Right button.
Next
1. Features to use when the image is ou
Half press shutter button to focus
b. To focus on a subject 80cm or more a
c. To focus on a subject less than 80cm
d. To focus on a subject less than 5cm a
e. To focus on people’
s faces
Pressing the
Left/Right button.
Next
Back
1.a Half press shutter button to focus
Focusing status can be checked
by half-pressing shutter button
- Green: Focusing successful
- Red: Focusing failed
Back
Practice
Pressing the
Up/Down button.
Pressing the MENU button.
00016
00016
Pressing the
Shutter button.
MENU Guide List
022
Practice begins
when you press the
shutter.
MENU Guide List
2/2
Pressing the
Right button.
1.a Half press shutter button to focus
When focusing is successful, fully
press the shutter button to shoot.
If focusing fails, half press the
button again.
Back
Practice
Starting the Recording mode
How to use the Movie clip mode
A movie clip can be recorded for up to
2hours.
00:01:01
1. Select the Movie clip mode by pressing
the M (Mode) button.(p.20)
2. Point the camera towards the subject
and compose the image by using the
STANDBY
LCD monitor.
3. Press the Shutter button once and movie
clips are recorded for up to 2hours. Movie clips will still be recorded if the
Shutter button is released.
If you wish to stop recording, press the Shutter button again.
Image size and type are listed below.
– Image size: 800x592, 640x480, 320x240
– Movie clip file type: AVI (MPEG-4)
– Frame Rate: 30FPS, 20FPS, 15FPS
– The frame rate can be selected when the following image size is
selected.
800x592: 20FPS selectable
640x480, 320x240: 30FPS, 15FPS selectable
Recording the movie clip without sound
You can record the movie clip without
sound.
Steps from 1-3 are the same as those for
Movie clip mode.
4. Press the MENU button.
5. Select the [RECORDING] menu by
pressing the Left/Right button.
00:01:01
STANDBY
6. Press the Down button to select the
[Voice Mute] menu and press the Right
button.
7. Select the [On] menu by pressing the
Up/Down button.
8. Press the OK button. You can record a
movie without sound.
RECORDING
Voice Mute
Off
On
OK Set
Back
Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily
stop during unwanted scenes, while
recording a movie clip. Using this function,
you can record your favourite scenes
into a movie clip without having to create
multiple movie clips.
00:00:18
REC
SH Stop
Using Successive Recording
Steps from 1-2 are the same as those for Movie clip mode.
3. Point the camera towards the subject and compose the image by
using the LCD monitor. Press the Shutter button and movie clips are
recorded for as long as the available recording time. Movie clips will still
be recorded if the Shutter button is released.
) button to pause recording.
4. Press the Play & Pause (
5. Press the Play & Pause (
) button again to resume the recording.
6. If you wish to stop recording, press the Shutter button again.
023
Starting the Recording mode
How to use the Scene modes
Use the menu to easily configure optimal settings for a variety of
shooting situations.
1. Select the Scene mode by pressing
the M (Mode) button (p.20).
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
00016
The scene modes are listed below.
Icons
Scene modes
[Nightscene]
[Portrait]
[Children]
[Landscape]
01:00 PM
2008/01/01
[Text]
[Close up]
[Sunset]
[Dawn]
[Backlight]
[Firework]
[Beach&Snow]
[Self Shot]
[Food]
[Café]
024
Description
Use this for shooting still images at night
or in other dark conditions.
To take a picture of a person.
To take a picture of fast moving objects,
for example, children.
To take pictures of distant scenery.
Use this mode to shoot a document.
Close-up shooting for small objects such
as plants and insects.
For taking pictures of sunsets.
Daybreak scenes.
Portrait without shadows caused by
backlight.
Firework scenes.
For ocean, lake, beach and snowscape
scenes.
Use when the photographer would also
like to appear in the image.
For taking delicious looking food.
For taking pictures in cafes and
restaurants.
Things to watch out for when taking pictures
Pressing the Shutter button down half way.
Lightly press the Shutter button to confirm focus and flash battery charge.
Press the Shutter button all way down to take the picture.
<Lightly press the Shutter button>
<Press the Shutter button down all the way>
The available memory capacity may vary depending on shooting
conditions and camera settings.
When the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator ( ) may appear on the
LCD monitor. In this case, use a tripod, support the camera on a solid
surface or change to flash shot mode.
Shooting against the light: Please do not take pictures against the sun.
Doing so may make the picture dark. To take a picture against the light,
please use the [Backlight] in the scene shooting mode (see page 24),
fill-in flash (see page 33), spot metering (see page 39), or exposure
compensation (see page 41).
Avoid obstructing the lens or the flash when you capture an image.
Compose the image by using the LCD monitor.
Under certain conditions the auto focus system may not perform as
expected.
– When photographing a subject that has little contrast.
– If the subject is highly reflective or shiny.
– If the subject is moving at high speed.
– When there is strong reflected light, or when the background is very
bright.
– When the subject matter has only horizontal lines or the subject is very
narrow (such as a stick or flagpole).
– When the surroundings are dark.
025
Focus lock
To focus on a subject not positioned in the centre of the picture, use the
focus lock function.
The recording mode function can be set up by using the camera
buttons.
Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the Shutter button halfway. When the green auto focus frame
lights up, it means the camera is focused on the subject. Be careful
not to press the Shutter button all the way down to avoid taking an
unwanted picture.
3. With the Shutter button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press the
Shutter button completely to take the picture. If you release your finger
from the Shutter button, the focus lock function will be cancelled.
00016
00016
F 3.5
1/45s
01:00 PM
2008/01/01
1. The image to be
captured.
026
Using the camera buttons
to set the camera
00016
F 3.5
1/45s
01:00 PM
2008/01/01
2. Press the Shutter
button halfway and
focus on the subject.
01:00 PM
2008/01/01
3. Recompose the
picture and fully
depress the Shutter
button.
POWER button
Used for turning the camera’s power on/off.
If there is no operation during the specified
time, the camera’s power will be turned off
automatically to save battery life.
Refer to page 90 for more information about
the auto power off function.
Shutter button
FD (Face Detection) button
Used for taking an image or recording voice in the Recording mode.
This mode detects the face position of the subject automatically and
then sets the focus and exposure. Select this mode for quick and easy
face picture. In MP3 and PMP mode, this button will lock the camera
buttons.
In Movie clip mode
Pressing the Shutter button down fully
starts the process for recording a movie
clip. Press the Shutter button once
and the movie clip is recorded for as
long as the available recording time in
the memory allows. If you wish to stop
recording, press the Shutter button
again.
In Still image mode
Pressing the Shutter button down halfway activates the autofocus and
checks the condition of the flash. Pressing the Shutter button down
fully takes and stores the image. If you select voice memo recording,
the recording will start after the camera has finished storing the image
data.
Selectable modes: [Auto], [Program], [DIS], [FUN], [Photo Help Guide],
Scene modes ([Portrait], [Children], [Beach & Snow],
[Self-shot], [Café])
1. Press the FD (Face Detection) button
( ) in the selectable modes. The FD
icon will be displayed on the left side of
the screen.
00016
01:00 PM
2008/01/01
2. The size and position of the auto focus
frame is set at the face of the subject
automatically.
3. Press the Shutter button halfway. The
focus frame turns to green when the
focus is activated.
4. Press the Shutter button fully to take a
picture.
00016
01:00 PM
2008/01/01
027
FD (Face Detection) button
This function can detect up to 9 people.
When the camera recognises many people at the same time, it
will focus on the nearest person.
The Digital zoom is not activated in this mode.
The effects functions are not activated in this mode.
When the camera detects a target face, the white colour focus
frame will be displayed over the target face and the gray colour
focus will appear over the remaining faces(up to 8). Press the
Shutter button halfway down to focus on the face and the white
focus frame turns green.(Total 9)
Return to previous AF mode if face detection was failure.
In some conditions this function cannot work properly.
– When a person wears dark glasses or some part of the face is
hidden.
– When the person being taken does not look at the camera.
– When the camera doesn’t detect a face because of too much
or too little light.
– There is too great a distance between the camera and the
subject.
The maximum available Face Detection range is 3m (Wide).
The nearer the subject, the faster the camera can recognize the
subject.
028
■ Self Portrait
When taking pictures of yourself, the area of your face is automatically
detected so that you can take self pictures more easily and quickly.
Selectable modes: [Auto], [Program], [DIS], [FUN], [Photo Help Guide],
Scene modes ([Portrait], [Children], [Beach & Snow],
[Self-shot], [Café])
1. When pressing the Face Detection button again on the face location
screen, the Self Portrait icon ( ) appears.
00016
00016
Pressing the
FD button
01:00 PM
2008/01/01
01:00 PM
2008/01/01
2. For self-filming, set the camera lens towards the face of the object.
It automatically detects the face of the object, and emits a guiding
sound.
3. Start filming by pressing the Shutter button.
When locating the face in the center of the screen, it repeatedly
emits a faster sound unlike the sounds that are emitted when
the face is not in the center.
The guiding sound can be set using the sound setting menu.
(p.83)
If [Self Portrait] is set, it is fixed to Macro focus.
If [Self Portrait] is set, Motion Timer cannot be selected.
ZOOM W / T button
If the menu is not displayed, this button
works as the OPTICAL ZOOM or DIGITAL
ZOOM button. This camera has a 3X optical
zoom and a 5X digital zoom function. Using
both will offer a total zoom ratio of 15X.
WIDE Zoom
Optical zoom WIDE: Pressing the Zoom W button. This will zoom out
from the subject i.e. the subject will appear further
away. Pressing the Zoom W button continuously will
set the camera to its minimum zoom setting i.e. the
subject appears at its furthest from the camera.
TELE Zoom
Optical zoom TELE: Pressing the Zoom T button. This will zoom into the
subject i.e. the subject will appear nearer.
Digital zoom TELE: When the maximum (3X) optical zoom is selected,
pressing the Zoom T button activates the digital
zoom software. Releasing Zoom T button stops the
digital zooming at the required setting. Once the
maximum digital zoom (5X) is achieved, pressing
the Zoom T button will have no effect.
00016
01:00 PM
2008/01/01
<WIDE zoom>
Pressing
the
Zoom T
button
00016
01:00 PM
2008/01/01
<TELE zoom>
Pressing
the
Zoom T
button
X5.0
00016
01:00 PM
2008/01/01
00016
Pressing
the
Zoom W
button
01:00 PM
2008/01/01
00016
Pressing
the
Zoom W
button
01:00 PM
2008/01/01
<TELE zoom>
00016
01:00 PM
2008/01/01
<Optical zoom 2X>
<WIDE zoom>
Digital zoom WIDE: When the digital zoom is in operation, pressing the
Zoom W button will reduce the digital zooming
Optical zoom
in steps. Releasing Zoom W button stops
X 5.0 digital zooming. Pressing the Zoom W button
will reduce the digital zoom and then it will
Digital zoom
continue to reduce the optical zoom until the
minimum setting is reached.
X5.0
00016
<Digital zoom 5.0X>
01:00 PM
2008/01/01
<Digital zoom 5.0X>
Pressing
the
Zoom W
button
00016
01:00 PM
2008/01/01
<TELE zoom>
Pressing
the
Zoom W
button
00016
01:00 PM
2008/01/01
<WIDE zoom>
029
ZOOM W / T button







Images taken using the digital zoom may take a little longer for
the camera to process. Allow time for this to take place.
The digital zoom cannot be used in movie clip shots.
You may notice a decrease in image quality when using the
digital zoom.
To view a clearer digital zoom image, press the Shutter button
halfway at the maximum optical zoom position and press the
Zoom T button again.
The digital zoom can’t be activated in some Scene modes
(Nightscene, Children, Text, Close-up, Fireworks, Food), Face
Detection mode, DIS mode, the Movie Clip mode and FUN
recording mode.
Take care not to press the lens as this may cause a camera
malfunction.
It is possible that beep and button sounds of the camera can
be recorded while shooting the movie clips.
Function Description / Info (
) / Up button
While the menu is showing, the Up button operates as a direction
button. If the menu screen does not appear, information or function
descriptions of the current filming image (filming mode) can be
accessed through the liquid crystal monitor by pressing the Function
description/ Information ( ) button.
00016
00016
Display every piece of information
about shooting.
Display the basic information.
00016
Display description for each feature.
01:00 PM
2007/08/01
<Filming screen>
■
01:00 PM
2007/08/01
<Information screen>
<Function description screen>
Function description: When pressing the Function description button on the information
screen mode, detailed descriptions of the functions can be
viewed. The function description can be cancelled by pressing the
Function description button again.
00016
00016
Pressing
the Function
description
button
Display description for each feature.
Pressing
the
Fn button
01:00 PM
2007/08/01
<Examples of Function descriptions>
030
Size
Set the photo size.
Macro ( ) / Down button
While the menu is showing, press the Down button to move from the
main menu to a sub menu, or to move down the sub menu. When
the menu is not showing, you can use the Macro/Down button to
take macro pictures. The distance ranges are shown below. Press the
Macro button until the desired macro mode indicator appears on the
LCD monitor.
00016
00016
01:00 PM
2007/08/01
<Auto Focus>
01:00 PM
2007/08/01
<Macro (
00016
)>
00016
Types of focus mode and focus range (W: Wide, T: Tele)
Mode
Auto(
Focus Type
Focus range
Super macro(
)
Mode
Super macro(
Focus range
W: 1 ~ 5
(Wide only)
)
Mode
Focus Type
Focus range
Super macro(
)>
<Super Macro (
)>
)
)
–
W: 80 ~ Infinity
T: 80 ~ Infinity
DIS mode(
)
Auto macro(
)
W: 5 ~ Infinity
T: 40 ~ Infinity
–
Super macro(
Normal
)
FUN mode(
Focus range
<Auto Macro (
Macro(
)
Macro(
W: 5~80
T: 40~80
Normal
W: 80 ~ Infinity
T: 80 ~ Infinity
W: 5 ~ 80
T: 40 ~ 80
Mode
01:00 PM
2007/08/01
)
Program(
Focus Type
Focus Type
01:00 PM
2007/08/01
)
Auto macro(
W: 5 ~ Infinity
T: 40 ~ Infinity
–
(Unit: cm)
Normal
W: 80 ~ Infinity
T: 80 ~ Infinity
)
)
Normal
W: 80 ~ Infinity
T: 80 ~ Infinity
When the macro mode is selected, be particularly careful to
avoid camera shake.
When you take a picture within 30cm (Wide zoom) or 50cm
(Tele zoom) in the Macro mode, select the FLASH OFF mode.
When you take a picture within the 5cm Super macro range,
the autofocus on the camera will take longer to set the correct
focus distance.
031
Macro ( ) / Down button
Flash ( ) / Left button
Available focusing method, by Recording mode
( : Selectable, ∞: Infinity focus range)
Mode
Auto macro
Super macro
Macro
Normal
When the menu is displayed on the LCD monitor, pressing the Left
button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the Left button
operates as the Flash( ) button.
Selecting the flash mode
Mode
Auto macro
SCENE
Super macro
Macro
Normal
1. Press the Mode button to select a Recording mode with the exception
of the Movie clip mode or the DIS mode. (p.20)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor. Use the
correct flash to suit the environment.
Flash range
ISO
AUTO
(Unit: m)
Normal
Macro
Auto macro
WIDE
TELE
WIDE
TELE
WIDE
TELE
0.8 ~ 3.3
0.8 ~ 2.4
0.3 ~ 0.8
0.5 ~ 0.8
0.3 ~ 3.3
0.5 ~ 2.4
When the Super Macro is selected, flash is fixed as the Flash Off mode.
∞
032
Flash ( ) / Left button
If you press the Shutter button after selecting the Auto, Fill-in,
Slow synchro flash, the first flash fires to check the shooting
condition (Flash range and Power ratio of flash). Do not move
the camera until the second flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for
the flash is usually within 4 seconds. If the battery is weak, the
charging time will be longer.
In the DIS mode, [Landscape], [Close up], [Text], [Sunset],
[Dawn], [Firework], [Self Shot], [Food], [Café] scene modes
and the Movie clip mode, the flash function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close
or highly reflective.
When taking an image in poorly lit conditions with the flash,
there may be a white speck in the captured image. The speck
is caused by the the flash light reflecting off atmospheric dust.
Flash mode indicator
Icon
Flash mode
Auto flash
Description
If the subject or background is dark, the
camera flash will operate automatically.
If a subject or background is dark, the
Auto & Red eye camera flash will work automatically and will
eduction
reduce the red-eye effect by using the redeye reduction function.
Fill in flash
The flash fires regardless of the available
light. The intensity of the flash will be
automatically controlled to suit the prevailing
conditions.
Slow synchro
The flash operates with a slow shutter speed
to obtain a balanced correct exposure. In
poor lighting conditions the camera shake
warning indicator ( ) will display on the
LCD monitor.
Flash off
The flash does not fire.
Select this mode when capturing images in
a place or situation where flash photography
is prohibited. When you capture an image
in a poorly lit condition, the camera shake
warning indicator ( ) will appear on the
LCD monitor.
Red-eye
reduction
When a shot with “red eye” is detected,
this mode will reduce the red-eye effect
automatically.
033
Flash ( ) / Left button
Available flash mode, by Recording mode
Self-timer (
( : Selectable)
) / Right button
When the menu is displayed on the LCD monitor, pressing the Right
button makes the cursor shift to the right tab. When the menu is not
displayed on the LCD monitor, the Right button operates as the
Self-timer ( ) button. This function is used when the photographer
would also like to be in the image.
If you operate the Self-timer( ) button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent camera shake.
In Movie Clip mode, only the 10SEC self-timer will work.
When you select 2SEC self-timer with flash, the delay
(2 seconds) can be extended according to the flash charging
status.
If Motion Timer is set, [Self Portrait] cannot be selected.
034
Self-timer (
) / Right button
Selecting the self-timer
Motion Timer
1. Select a Recording mode with the
exception of Voice recording mode.
(p.20)
00016
2. Press the Self-timer ( ) button until
the desired mode indicator displays on
the LCD monitor.
01:00 PM
3. When you press the Shutter button,
2007/08/01
the picture will be taken after the
<Selecting the 10 SEC self-timer>
specified time has elapsed.
Icon
Self-timer Mode
Description
Pressing the Shutter button will allow an
10SEC self-timer interval of 10 seconds before the image is
taken.
2SEC self-timer
Pressing the Shutter button will allow an
interval of 2 seconds before the image is taken.
A picture will be taken after about 10 seconds
Double self-timer and 2 seconds later a second picture will be
taken.
Motion Timer
Motion
Icon & Self-timer lamp
Pressing the Shutter button after
setting the Motion Timer
Blink (1 second interval)
Detecting the subject’s
movement
Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken after
2 seconds.
The Motion Timer flows are as followings.(Movie Clip mode
excluded)
Selecting the Motion Timer Pressing the Shutter button Confirming
the composition (Within 6 sec.)*1 Starting the detection (Swing your
hands fully)*2 Stopping the detection (Do not move) Taking an image
(after 2 sec.)
*1: The camera detects the subject’s movement 6 seconds after pressing
the Shutter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
The camera detects the subject’s movement
6 seconds after pressing the Shutter button,
and the picture is taken when the movement is
stopped.
035
Self-timer (
) / Right button
In the following cases, the Motion Timer may not operate.
The focus distance is over 3m.
00016
The exposure is too bright or
dark
In backlight conditions.
The movement is insignificant
The movement is detected out
01:00 PM
2007/08/01
of the center part (50%) of the
sensor where the movement is
recognized.
<The detection range of
Motion Timer>
If the camera doesn`t sense any
movement for 30 seconds, or the
camera doesn’t sense stillness
after sensing movement
MENU / OK button
MENU button
– When you press the MENU button, a menu related to each camera
mode will be displayed on the LCD monitor. Pressing it again will return
the LCD to the initial display.
– A menu option can be displayed when the following are selected: Movie
clip and Still image mode. There is no menu available when the Voice
recording or Photo Help Guide mode is selected.
00016
Pressing the
MENU button
01:00 PM
2007/08/01
<Menu off>
RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Move
Center AF
Off
Off
MENU Exit
<Menu on>
OK button
– When the menu is displayed on the LCD monitor, this button is used for
shifting the cursor to the sub menu or for confirming data.
036
Fn button
You can use the Fn button to set the following menus.
How to use the Fn menu
( : Selectable)
Page
[SIZE]
p.38
[QUALITY/
FRAME RATE]
p.38
[METERING]
p.39
[DRIVE]
p.39
QUALITY
SIZE
[ISO]
p.40
[WHITE
BALANCE]
p.40
[EXPOSURE
[VALUE]
p.41
[LONG TIME
SHUTTER]
1. Press the Fn button in an available mode
2. Select a desired menu by pressing the Up/Down button. And then a
sub menu will be displayed on the left side of the LCD monitor.
*1
*1 This menu is only available in the Night scene mode (
p.42
).
Up/Down
button
3. Select a desired menu by pressing the Left/Right button and then
press the OK button.
SIZE
7M P 3264x2176
Left/Right
button
037
Fn button: Size
Fn button: Quality / Frame rate
You can select the image size appropriate for your application.
You can select the compression ratio appropriate for your application of
the captured images. The higher the compression ratio, the lower the
picture quality.
Still
image
Mode
Movie
clip
Mode
Icon
Size
3264x
2448
3264x
2176
3264x
1836
2592x
1944
2048x
1536
1024x
768
Icon
Size
800x592
640x480
320x240
Mode
Still image Mode
Sub menu
Super Fine
Fine
File Format
jpeg
jpeg
Fine
8M 3264x2448
jpeg
avi
avi
avi
20FPS
< Movie clip mode >
< Movie clip mode >
The higher the resolution, the lower the number of shots
available because high resolution images use more memory.
038
Normal 30FPS 20FPS 15FPS
800 x 592
< Still image mode >
< Still image mode >
Movie clip mode
Icon
This file format complies with the DCF (Design rule for Camera
File system).
JPEG (Joint Photographic Experts Group):
JPEG is the image compression standard developed by the
Joint Photographic Experts Group. This type of compression
is most commonly used for compressing photos and graphics
because it can compress the files efficiently.
Fn button: Metering
Fn button: Drive mode
If you cannot obtain suitable exposure conditions, you can change the
metering method to take brighter pictures.
You can select continuous shot, and AEB (Auto Exposure Bracketing).
Multi
Single
Icon
Metering
Mode
[Multi]
[Spot]
[Center]
Description
Exposure will be calculated based on an average
of light in each image area divided into multiple
regions. However, the calculation will be biased
towards the centre of the image area. This is
suitable for general use.
Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable
when the subject in the centre is exposed correctly,
regardless of the back lighting.
Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the centre of the
image area. This is suitable for taking a picture of
small objects like flowers or insects.
Icon
Drive Mode
[Single]
[Continuous]
[Motion
Capture]
[AEB]
Description
Take one picture only.
Images will be taken continuously until the Shutter
button is released.
This takes 6 shots per second for up to 5 seconds,
when the shutter is pressed and held down. After
completing the continuous shooting, images are
saved automatically. The maximum number of shots
is 30 and the image size is fixed as VGA.
Take three pictures in a series in different
exposures: standard exposure (0.0EV), short
exposure (-1/3EV) and over exposure (+1/3EV).
If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance, it is
better to use exposure compensation.
039
Fn button: ISO
Fn button: White balance
You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO
numbers.
The white balance control allows you to adjust the colours to appear
more natural.
Auto
Icon
ISO Mode
[Auto]
[ISO 80]
[ISO 100]
[ISO 200]
[ISO 400]
[ISO 800]
[ISO 1600]
[ISO 3200]
Description
The camera’s sensitivity is automatically changed
by variables such as lighting value or subject
brightness.
You use a faster (shorter) shutter speed while the
same amount of light is present, by increasing the ISO
sensitivity. However, the image may be saturated in high
luminance. The higher the ISO value, the higher the
camera’s sensitivity to light and therefore the greater its
capacity to take pictures in darker conditions. However,
the noise level in the image will increase as the ISO
value increases, making the image appear coarse.
When the ISO 3200 menu is selected, the image size is fixed as 3M.
Auto WB
Icon
White balance
Mode
Description
The camera automatically selects the
appropriate white balance settings, depending
on the prevailing lighting conditions.
[Daylight]
For taking images outside.
For taking images under a cloudy or overcast
[Cloudy]
sky.
For shooting under daylight fluorescent types
[Fluorescent_H]
of threeway fluorescent lighting.
[Fluorescent_L] For shooting under white fluorescent lighting.
For shooting under tungsten (standard light
[Tungsten]
bulb) lighting.
Allows the user to set the white balance
[Custom Set]
according to the shooting conditions.
[Auto WB]
Different lighting conditions may cause a colour cast on your images.
040
Fn button: White balance
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for
a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM ( ) menu of the
White Balance and place a sheet of
white paper in front of the camera so
that the LCD monitor shows only white.
2. MENU/OK button: Selects previous
custom white
balance.
White paper
Shutter button: saves new custom
white balance.
– The custom white balance value will be applied, starting with the
next picture you take.
– The user configured white balance will be remain effective until it is
overwritten.
Fn button: Exposure compensation
This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the Fn button.
Compensating Exposure
1. Press the Fn button, and then use the
Up/Down button to select the exposure
) icon. The exposure
compensation (
compensation menu bar will appear as
shown.
2. Use the Left/Right button to set the
EXPOSURE VALUE
-2
-1
0
+1
+2
desired exposure compensation factor.
0
3. Press the Fn button again. The value
you set will be saved and the Exposure Compensation setup mode will
)
close. If you change the exposure value, the exposure indicator (
will be displayed on the bottom of the LCD monitor.
A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor should appear white or you may not
get good pictures.
041
Fn button: Long time shutter
This camera automatically adjusts the shutter speed and aperture
values to the shooting environment. However, in Night scene mode,
you can set the shutter speed and aperture values to your preference.
Changing the Shutter speed and
Aperture value
1. Select the [Nightscene] mode. (p.24)
2. Press the Fn button and Long Time
shutter menu will be displayed.
3. Configure the Long Time shutter value
with the 5 function button.
4. Press the Fn button again. The value
you set will be saved and the mode
will switch to Night scene mode.
LONG TIME SHUTTER
F 3.5
1S
Aperture Value
Wide: Auto, F3.5 ~ 6.2
Tele: Auto, F4.5 ~ 8.0
Shutter Speed
Auto, 1 ~ 16S
042
E (Effect) button
It is possible to add special effects to your images by using this button.
Available Effects, by recording mode
Mode
E button
( : Selectable)
Mode
E (Effect) button: Photo Style
Selector
You can add various effects to the image
without using image editing software.
Press the E button in an available mode.
Soft
E button
Move
E
Exit
1. Select the desired Photo style selector by pressing the Left/Right
button and press the OK button.
2. Press the Shutter button to take an image.
Icon
This button will not operate in DIS, Voice recording mode and
some scene modes ([Nightscene], [Text], [Sunset], [Dawn],
[Backlight], [Firework], [Beach&Snow]).
Even if the camera is turned off, the effect setting will be
preserved.
If the image size is (
selected.
) or (
), the FUN menu can’t be
Style mode
Description
[Normal]
No style effect is added to the image.
[Soft]
The image will be applied with the soft colours.
[Vivid]
The image will be applied with the vivid colours.
[Forest]
The image will be applied with the clear natural
colours.
[Retro]
The image will be applied with the sepia tone.
[Cool]
The image will be applied with the cool colours.
[Calm]
[Classic]
The image will be applied with the calm colours.
The image will be applied with the classic
colours.
043
E (Effect) button: Image editing
Press the E button in the [Program], [Movie], [Portrait], [Children],
[Close up], [Self Shot], [Food] and [Café] scene modes.
Custom colour: You can change the
R (Red), G (Green) and B (Blue)
values of the image.
Color
Colour
1. Select the Colour(
) menu by
pressing the Up/Down button.
2. Select the desired sub menu by
pressing the Left/Right button and
press the OK button.
3. Press the Shutter button to take an
image.
Icon
COLOUR
[Normal]
Move
Move
OK Set
Captured images will be stored in black and white.
[Sepia]
Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
[Green]
[Blue]
[Negative]
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Save the image in negative mode.
[Custom Color] Captured image will be saved in set RGB tone.
044
– OK button: Selects / setups the Custom
Colour
– Up/Down button: Selects R, G, B
– Left/Right button: Changes the values
Color
Description
No colour effect is added to the image.
[B/W]
[Red]
OK Set
Color
Move
OK Set
E (Effect) button: Image editing
Press the E button in the [Program] mode.
Sharpness
1. Select the Sharpness(
) menu by
pressing the Up/Down button and a
bar for selecting the sharpness will be
displayed.
2. Change the sharpness by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
Saturation
1. Select the Saturation(
) menu by
pressing the Up/Down button and a
bar for selecting the saturation will be
displayed.
2. Change the saturation by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
Saturation
Move
Sharpness
Move
OK Set
OK Set
Contrast
1. Select the Contrast(
) menu by
pressing the Up/Down button and a
bar for selecting the contrast will be
displayed.
2. Change the contrast by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
Contrast
Move
OK Set
045
E (Effect) button: Cartoon
You can add a text box to the image to make the image cartoon like.
The size of Cartoon image is fixed to 1M.
Press the E button in the FUN recording mode.
00016
FUN
Select Cartoon (
Move
E
Select a desired frame by
pressing the Left/Right
button and press the OK
button.
).
Exit
OK Set
Frame
SH Capture
Fn Edit
00016
Fn Edit
00016
Fn Delete
SH Capture
100-0016
Press the OK button and the file
is saved as a new file name.
OK Save
Fn Edit
Press the Shutter
button to take an
image.
Select the text box position
of the third image with the
same procedure and take
the third image.
SH Capture
SH Capture
00016
00016
046
Press the Fn button and
select a desired text box
position by pressing the
Left/Right button.
Cartoon
Balloon
E (Effect) button: Cartoon
Changing the cartoon image before taking the last shot
Before saving the cartoon image, you can take images again.
1. Select an image to delete by using the Left/Right button.
2. Press the Fn button and the image deletes.
00016
00016
Pressing the
Fn button
OK Save
Fn Delete
SH Capture
Fn Edit
3. To take a new image, press the Shutter button.
You can select the menu by pressing the MENU button when
the cartoon image is taken but not saved in the memory. If the
[Yes] is selected, menu will is displayed on the LCD monitor
and the cartoon image which is not saved will be deleted.
047
E (Effect) button: Pre-set focus frame
You can make the subject stand out from its surroundings. The subject
will be sharp and in focus while making the rest out of focus.
The size of High Light image is fixed to under 5M.
Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
00016
00016
Press the E button in the FUN recording mode.
FUN
Pressing the
Fn button
High Light
SH Capture
Select High Light
( ).
E
Move
Exit
Range
High Light
SH Capture
Move
<The range is activated: The focus
frame is changed to a solid line.>
Pressing the Up/Down/
Left/Right button.
OK Set
1. Select a proper menu by pressing the Left/Right button and press the
OK button.
High Light
Fn Edit
<Point the camera towards the
subject and compose the image
by using the LCD monitor.>
00016
00016
High Light
High Light
Pressing the
Fn button
Range
OK Set
<Range 1>
Range
OK Set
<Range 2>
Range
OK Set
<Range 3>
2. The preset focus frame will appear.
Press the Shutter button to capture an
image.
<Range 4>
00016
SH Capture
Fn Edit
Pressing the
Shutter button.
100-0016
SH Capture
048
OK Set
Range
Fn Edit
<Final image>
SH Capture
Move
<After changing the range>
E (Effect) button: Composite shooting
You can combine 2 - 4 different shots in a still image.
The size of Composite image is fixed to under 5M.
Selecting 2 composite shots
00016
00016
Press the E button in the FUN recording mode.
Pressing the
Shutter button.
FUN
Composite
SH Capture
Select Composite
( ).
E
Move
Exit
Composite
Composite
Composite
OK Set
<Composite 1>
Composite
Composite
OK Set
<Composite 2>
Composite
Pressing the
Shutter button.
100-0016
OK Set
Composite
00016
Pressing the
OK button.
Composite
<Composite 3>
Fn Delete
<First shot>
OK Set
1. Select a desired menu by pressing Left/Right button and press the OK
button. (You can select 2-4 composite images)
Composite
SH Capture
<Ready for taking>
OK Save
OK Set
<Composite 4>
2. After selecting a desired menu, press the Shutter button to take a
picture.
<The final picture>
Fn Delete
<Second shot>
After taking the last image, press the OK button to save the image.
You can use the Flash, Self-timer, Macro Focus and the
Zoom W/T button during the composite shooting.
If you press the Play mode, MENU, E button or M (Mode)
button during the composite shots, each camera working mode
is executed. The previously captured images will be deleted.
049
E (Effect) button: Composite shooting
Changing a part of composite shot before taking the last shot
Changing a part of composite shot after taking the last shot
Before taking the last composite shot, you can change a part of composite
shot.
After taking the last shot, you can change a part of the composite shot.
1. During the composite shots, press the Fn button.
2. A previous image will be deleted and new frame will be displayed. To
delete a previously taken image, press the Fn button again.
00016
00016
1. After taking the last shot, a cursor to select a frame will appear. Press
the Up/Down/Left/Right button to select the frame.
2. Press the Fn button and an image will be deleted. The composite frame
will be activated.
3. Press the Shutter button. You can take other images again by using
the Press the Up/Down/Left/Right button and Fn button.
4. Press the OK button again to save the captured image.
00016
00016
Pressing the
Left button.
Pressing the
Fn button
OK Save
Fn Delete
SH Capture
OK Save
<Before taking the 3rd shot>
<Moving backward to the 2nd shot>
Fn
OK Save
Delete
<After taking 4th shot>
3. Press the Shutter button to capture a new image.
00016
Pressing the
Shutter button.
Fn
Delete
<Moving backward to the
3rd shot>
Pressing the
Fn button.
SH Capture
00016
<Deleting 3rd shot>
100-0016
Pressing the
OK button.
OK Save
Fn
Delete
<Taking 3rd shot again>
050
<Final Image>
E (Effect) button: Photo Frame
You can add 9 types of frame-like borders to a still image you want
to capture. Date & Time information will not be printed on the stored
image taken with Photo Frame menu.
The size of Photo Frame image is fixed to under 5M.
Press the E button in the FUN recording mode.
FUN
Photo Frame
Select Photo
Frame (
).
Move
E
OK Set
Frame
Exit
Pressing the
OK button .
00016
00016
Pressing the
Fn button.
2. Press the Shutter button to take a picture.
SH Capture
Move
SH Capture
Fn Edit
1. The selected photo frame will be displayed by pressing Left/Right
button.
051
E (Effect) button: Colour Mask
With this menu, you can select a part you want to highlight. The rest of the image will be black and white.
Press the E button in the FUN recording mode.
00016
00016
Color Mask
E
Back
OK Set
Select Color Mask( ) by pressing the
OK button and the Mask mark will be
displayed on the LCD monitor.
Press the Fn button. You can change
the size and location of the mask.
SH Capture
Fn Edit
Move
T/W Size
Zoom W/T button:
Changing the Mask size
00016
100-0016
00016
Press the Shutter button and the mask
added image is taken.
Pressing the Fn button.
SH Capture
<Final image>
Fn Edit
Move
00016
<Mask added image>
Move
052
T/W Size
Up/Down/Left/Right button:
Moving the mask
T/W Size
Using the LCD monitor to adjust
the camera settings
You can use the menu on the LCD monitor to set up recording
functions.
Page
Multi AF
p.53
Back
[ACB]
[Voice
Memo]
On
p.54
Off
Off
[Voice
Record]
[Voice Mute]
are default settings.
Sub menu
[Focus Area] Center AF
Available mode
On
–
Off
You can select your preferred Focus Area according to the shooting
conditions.
RECORDING
Focus Area
ACB
Voice Memo
Voice Record
The items indicated by
Menu
Focus Area
On
Menus are subject to change without prior notice.
Focus Area
p.54
[Center AF]
p.55
[Multi AF]
p.56
Center AF
Multi AF
OK Set
Description
The rectangular area in the center of the LCD
monitor will be focused.
This camera selects all available AF points of the
LCD monitor.
When the camera focuses on the subject, the auto focus frame turns to
green. When the camera doesn’t focus on the subject, the auto focus
frame turns to red.
053
ACB
Voice Memo
This function is to adjust the contrast automatically when taking
photos in an environment with big exposure difference i.e. backlight or
contrast. This function adjusts the brightness automatically and allows
the subject to be photographed clearly.
You can add your voice-over to a stored
still image. (Max. 10 sec.)
- [ACB] Sub menus: [Off], [On].
RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Back
Back
Off
On
OK Set
When using the [Auto], [Program] mode and [Portrait] scene mode, the
ACB function will operate.
ACB function always operates in the [Auto] recording and [Portrait]
scene mode.
When using the [Continuous], [Motion Capture] or [AEB] menu, the
ACB function will not operate.
When the ACB function is selected, you cannot select a high ISO 400 or
higher.
054
RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Off
On
OK Set
– If the voice memo indicator is displayed
on the LCD monitor, the setting is
completed.
– Press the Shutter button and take a
picture. The picture is stored on the
memory card.
00016
01:00 PM
2007/08/01
– Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the Shutter button
will stop the voice memo.
00016
00:00:03
SH Stop
Voice recording
A voice can be recorded for as long as the
available recording time (Max. 10 hour)
allows.
Press the Shutter button to record a voice.
– Press the Shutter button once and
voice is recorded for as long as the
available recording time (max:10 hour)
allows. The recording time will be
displayed on the LCD monitor. Voice will
still be recorded if the Shutter button is
released.
– If you wish to stop recording, press the
Shutter button again.
– File type: *.wav
Pausing while recording a voice
RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Center AF
Off
Off
Using this function, you can record your
favourite voice clips into a voice recording
file without having to create multiple voice
recording files.
00:00:06
SH
Move
OK Set
00:01:00
00:00:00
SH
REC
MENU Exit
<Voice recording mode>
Stop
REC
1. Press the Play & Pause (
) button
<Pausing the voice recording>
to pause recording.
) button again to resume the recording.
2. Press the Play & Pause (
3. If you wish to stop recording, press the Shutter button again.
A distance of 40cm between you and the camera (microphone)
is the best distance to record sound.
If the camera power is turned off while the voice recording is
paused, the voice recording is cancelled.
055
Recording the movie clip without voice
Starting play mode
You can record the movie without voice.
Select [Voice Mute] menu in the Movie
clip mode. (p.23)
( ) icon will appear on the LCD monitor.
Press the Shutter button and a movie will
record for as long as the memory capacity
allows without voice.
RECORDING
Voice Mute
Back
Off
On
Turn the camera on and select Play mode by pressing the Play mode
( ) button. The camera can now play back the images stored in the
memory. If the memory card is inserted in the camera, all the camera
functions apply only to the memory card. If the memory card is not
inserted in the camera, all the camera functions apply only to the
internal memory.
OK Set
00:01:01
Playing back a still image
1. Select the Play mode by pressing the
Play mode ( ) button.
STANDBY
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to view
by pressing the Left/Right button.
Press and hold the Left or Right
button to play back the images
quickly.
056
100-0016
Starting play mode
Playing back a movie clip
100-0016
1. Select the recorded movie clip that
you want to play back by using the
Left/Right button.
) button
2. Press the Play & Pause (
to playback a movie clip file.
– To pause a movie clip file while
00:00:02
Play
E Capture
playing it back, press the Play &
) button again.
Pause (
)
– Pressing the Play & Pause (
button again will cause the movie clip
file to restart.
– To rewind the movie clip while it is
playing, press the Left button. To
fast forward the movie clip, press the
Right button.
)
– To stop playback of the movie clip, press the Play & Pause (
button, and then press the Left or Right button.
Movie clip capture function
You can capture still images from the movie clip.
How to capture the movie clip
1. Press the Play & Pause (
) button
while playing the movie clip. Then press
the E button.
2. The paused movie clip is saved in a
new file name.
The captured movie clip file is the same
size as the original movie clip (800x592,
640x480, 320x240).
When you press the E button at the
beginning of the movie clip, the first
frame of the movie clip will be saved as
a still image.
00:00:24
T
Trim
E Capture
<Paused>
<Press the E button>
057
Starting play mode
On camera movie trimming
You can extract desired frames of movie
clip during the movie clip play back. If the
running time is under 10 seconds, the
movie clip can’t be trimmed.
1. Press the Play & Pause (
) button
00:00:24
at the point of the movie clip where you
T Trim
E Capture
want to start extracting.
2. Press the T button.
) button
3. Press the Play & Pause (
and the extracted range will be
displayed on the status bar.
) button
4. Press the Play & Pause (
00:00:45
once more at the point where you wish
T Trim
the extracted file to stop.
5. Press the T button and a confirmation
window will be displayed.
6. Select a desired sub menu by pressing
Trimming?
No
the Up/Down button and press the OK
Yes
button.
[No]:
The movie trimming will be
cancelled.
[Yes]: The extracted frames are saved as a new file name.
If you don’t specify the ending point of the movie clip, the
trimming confirmation window will be displayed at the point of
the last frame.
058
Playing back a recorded voice
1. Select the recorded voice that you want
100-0017
to play back by using the Left/Right
button.
) button
2. Press the Play & Pause (
to play back a recorded voice file.
– To pause a recorded voice file, while
00:02:51
playing it back, press the Play &
Play
) button again.
Pause (
– To resume playback of the voice file, press the Play & Pause
) button
(
– To rewind the voice file while it is playing, press the Left button. To
fast forward the voice file, press the Right button.
– To stop playback of the voice memo, press the Play & Pause
) button and then press the MENU/OK button.
(
Starting play mode
LCD monitor Indicator
Playing back a voice memo
The LCD monitor displays shooting information about the displayed
image.
1. Select a still image that has the voice
memo.
) button
2. Press the Play & Pause (
to play back the voice memo.
– To pause the voice memo, while
playing it back, press the Play &
) button again.
Pause (
– To resume playback of the voice
memo, press the Play & Pause
) button.
(
– To stop playback of the voice memo,
)
press the Play & Pause (
button and then press the MENU/OK
button.
①
100-0016
②
③ ④
100-0016
⑬
⑫
⑪
TV
Flash
Size
Date
100-0016
⑤
⑥
⑦
ISO 80
AV 3.5
1/11
Off
3264x2448
2008/01/01
⑩⑨ ⑧
00:00:06
Pause
100-0016
00:00:06
Play
No.
Description
1
2
Playback mode
Folder name & File name
Internal memory icon/
Memory card icon indicator
Battery
ISO
Aperture value
Shutter speed
Flash
Image size
Recording date
DPOF
Protect
Movie Clip/Voice Memo
3
4
5
6
7
8
9
10
11
12
13
Icon
Page
100-0010
p.56
p.89
/
-
80 ~ 3200
F3.5 ~ F8.0
16 ~ 1/2000
On/Off
3264x2448 ~ 320x240
2008/01/01
/
p.15
p.40
p.42
p.42
p.32
p.38
p.86
p.80~82
p.79
p.23/54
059
Using the camera buttons to set the camera
In Play mode, you can use the buttons on the camera to conveniently
set up the Play mode functions.
Play mode button
If you have turned on the camera by
pressing the POWER button, you
can press the Play mode button
once to switch to Play mode and
press it again to switch to Recording
mode.
You can turn the power on with the Play mode button. The
camera is turned on in play mode. Press the Play mode button
again to turn off the camera.
Manner mode: To select the Manner mode, press the Play
mode button for more than 3 seconds. In the
Manner mode, Operating sound, Effect sound,
Start-up sound and Shutter sound will not be
generated. To cancel the Manner mode, turn on
the camera by pressing the POWER button.
Thumbnail(
) / Enlargement(
) button
You can view multiple pictures, enlarge a selected picture, and
crop and save a selected area of an image.
In the MP3, PMP, Text Viewer, Movie mode, slide show and
when playing back the recorded voice, you can control the
volume of multimedia files.
Thumbnail display
1. While an image is displayed on full screen,
press the Thumbnail button.
2. The thumbnail display will highlight the
image that had been showing at the time the
thumbnail mode was selected.
3. Press the 5 function button to move to a
desired image.
4. To view an image separately, press the Enlargement button.
100-0016
Pressing the
Thumbnail (
button
100-0016
)
1
In the PMP, MP3, Text viewer mode, pressing the Play mode
button will display the play list of each mode.
Pressing the
Enlargement (
button
<Normal display mode>
)
3
4
5
6
7
8
9
<Thumbnail display mode>
Highlighted image
060
2
Using the camera buttons to set the camera
Image enlargement
1. Select an image that you want to enlarge and
press the Enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Pressing the Thumbnail button will zoom back
to the original full sized image.
– You can tell whether the image
displayed is an enlarged view by
x 2.1
checking the image enlargement
indicator shown at the top left of the
LCD monitor. (If the image is not an
enlarged view, the indicator will not
be displayed.) You can also check
OK
the area of enlargement.
– Movie clips and WAV files can’t be enlarged.
– If an image is enlarged, a loss of quality may occur.
The maximum enlargement rate in proportion to the image size
Image size
Maximum
enlargement rate
X10.2
X9.1
X8.5
X8.1
X6.4
X3.2
Trimming: You can extract part of the image that you want and
save it separately.
Trim
1. Select an image that you want to
enlarge and press the enlargement
x 2.1
button. Press the MENU/OK button and
Trimming?
No
a message will be displayed.
Yes
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
OK Confirm
button.
– [No]: The trimming menu will disappear.
– [Yes]: The trimmed image will be saved as a new file name, and
appear on the LCD monitor.
If there is not enough memory space to save the trimmed image, the
image can’t be trimmed.
061
Info (
) / Up button
Play & Pause (
When the menu is displayed on the LCD monitor, the UP button
operates as a direction button. When the menu is not displayed on
the LCD monitor, pressing the Info( ) button will display image
information on the LCD monitor.
100-0016
100-0016
Info (
) button
ISO
AV
TV
Flash
Size
Date
80
3.5
1/11
Off
3264x2448
2008/01/01
) / Down button
In Play mode, the Play & Pause (
follows:
– If the menu is displayed
Press the Down button to move from the main menu to a sub menu, or
to move down the sub menu cursor.
– If a still image with a voice memo, a voice file, or a movie clip is playing
·In Stop mode:
Plays a still image with a voice memo, a voice file,
or a movie clip.
·During playback: Temporarily stops playback.
·In Pause mode:
Resumes playback
100-0017
Info (
) button
Info (
100-0017
100-0017
) button
00:02:51
Play
<Voice recording is stopped>
062
)/ Down button works as
◀
REW
Pause
00:00:05 FF ▶
OK Stop
<Voice recording is playing>
00:00:12
Play
OK Stop
<Voice recording is paused>
Left / Right / Menu / OK button
Delete ( ) button
Left/Right/MENU/OK button activates the following.
This deletes images stored on the memory card.
– Left button:
While the menu is showing, the Left button operates as
a direction button. While the menu is not showing, press
the Left button to select the previous image.
– Right button: While the menu is showing, the Right button operates as
a direction button. While the menu is not showing, press
the Right button to select the next image.
– MENU button: When you press the MENU button, the play mode menu
will be displayed on the LCD monitor. Pressing it again
will return the LCD to the initial display.
– OK button:
When the menu is displayed on the LCD monitor, the
OK button is used for confirming data that is changed by
using the 5 function button.
Print (
) button
When the camera is connected to a PictBridge printer, you can print
images by pressing the Print button.
100-0016
Print
1. Select an image that you want to delete by pressing the Left/Right
button and press the Delete ( ) button.
100-0016
100-0016
Delete image?
1
Delete
image?2
3
No
Yes
5
6
8
9
No
Yes
T
Select
4
7
OK Confirm
<Single Image>
OK Confirm
<Thumbnail Image>
2. To add images to delete, press the
T button.
– Left/Right button: Selects images
– T button: Checks for deletion
– OK button: Deletes the selection
100-0016
Prev ◀
T
Select
▶ Next
OK Delete
3. Select the submenu values by pressing the Up/Down button and then
press the OK button.
– If [No] is selected: Cancels “Delete Image”.
– If [Yes] is selected: Deletes the selected images.
OK Menu
063
E (Effect) button: Resize
Change the resolution (size) of pictures taken. Select [Start image] to
save an image to be the start-up image.
1. Press the Play mode button and press
the E button.
2. Press the Left/Right button and select
the [RESIZE] ( ) menu tab.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
Image Resize Types
3M
1M
5MP
3MP
1MP
2MW
1MW
8M
5M
3M
1M
7MP
6MW
064
– Only JPEG images can be resized. Movie clip (AVI), Voice recording
(WAV) files can’t be resized.
RESIZE
– You can change the resolution of only those files compressed in the
JPEG 4:2:2 format.
– The resized image will have a new file name. The [Start Image] image
is stored not on the memory card but on the internal memory.
Move
E
Exit
( : Selectable)
5M
– A large sized image can be resized to a smaller sized image, but not
vice versa.
– If a new user image is saved, one of the two user images will be deleted
in order.
– If the memory capacity is insufficient to store the resized image, a
[Memory Full!] message will appear on the LCD monitor and the resized
image can’t be stored.
E (Effect) button: Rotating an image
E (Effect) button: Colour
You can rotate the stored images by various degrees.
Once the playback of the rotated picture is finished, it will switch back
to the original state.
It is possible to add colour effects to your images by using this button.
1. Press the Play mode button and press
the E button.
2. Press the Left/Right button and select
the [ROTATE] ( ) menu tab.
3. Select a desired sub menu by pressing
the Up/ Down button.
) menu tab by pressing the
2. Select (
Left/Right button.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
ROTATE
E
Move
Right 90 ˚
E
Back
Left 90 ˚
OK Set
< : Right 90˚>:
Rotate picture in a clockwise direction
Horizontal
E
Back
Exit
180 ˚
OK Set
< : Left 90˚>:
Rotate picture in a
counterclock-wise direction
1 Press the Play mode button and press
the E button.
E
Back
OK Set
< : 180˚>:
Rotate picture 180 degrees
Icon
Effect Mode
Move
E
Exit
Description
[B/W]
Captured images will be stored in black and
white.
[Sepia]
Captured images will be stored in a sepia tone (a
gradient of yellowish brown colours).
[Red]
[Green]
[Blue]
[Negative]
Vertical
COLOR
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Save the image in negative mode.
[Custom Color] Captured images will be stored in set RGB tone.
E
<
Back
OK Set
: Horizontal>:
Rotate picture horizontally
E
Back
OK Set
4. The changed image is saved as a new file name.
< : Vertical>:
Rotate picture vertically
If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
065
E (Effect) button: Colour
E (Effect) button: Image editing
1. Press the Play button and press the E button.
Custom colour
You can change the R(Red), G(Green) and
B(Blue) values of the image.
2. Select (
) menu tab by pressing the Left/Right button.
ACB
Custom Color
You can automatically adjust the brightness of the region with big
exposure difference from the captured image.
E
– OK button: Selects / setups the Custom
Colour.
– Up/Down button: Selects R, G, B.
– Left/Right button: Changes the values.
Back
OK Set
Custom Color
1. Select (
) by pressing the Up/Down
button and press the OK button.
2 The [Processing!] message displays
and the image is saved as a new file
name.
ACB
E
E
Back
OK Set
Back
OK Set
Red eye removal
Red eye effect can be removed from the captured image.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2 The [Processing!] message displays
and the image is saved as a new file
name.
Red Eye Fix
E
066
Back
OK Set
E (Effect) button: Image editing
Brightness control
Saturation control
You can change the brightness of the image.
You can change the saturation of the image.
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
brightness will be displayed.
2. Change the brightness by pressing the
Left/Right button.
3. Press the OK button and the image will
be saved as a new file name.
Brightness
◀▶
Move
OK Set
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
saturation will be displayed.
2. Change the saturation by pressing the
Left/Right button.
3. Press the OK button and the image will
be saved as a new file name.
Saturation
◀▶
Move
OK Set
Contrast control
Noise effect
You can change the contrast of the image.
You can add noise to an image to add a more classic feel to your
photo.
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
contrast will be displayed.
2. Change the contrast by pressing the
Left/Right button.
3. Press the OK button and the image will
be saved as a new file name.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2. The [Processing!] message appears
and the image is saved as a new file
name.
Contrast
◀▶
Move
Add Noise
OK Set
E
Back
OK Set
067
E (Effect) button: FUN
If the image size is (
) or (
), the FUN menu cannot be selected.
Cartoon
You can add a text box to the image to make the image cartoon like.
The cartoon image is saved as 1M image size.
Cartoon
Select Cartoon
(
).
E
Move
Select a desired
frame by pressing
the Left/Right button
and then press the
OK button.
Exit
Frame
Select a desired position
by pressing the Up/
Down/Left/Right button
and press the OK button.
◀ ▶
FUN
◀ ▶
OK Set
Move
OK Set
Balloon
OK Set
100-0006
OK
Select
1
2
3
4
5
6
E
Press the OK button
and the image is saved.
Press the OK button
again to open a new
image to save.
Back
Change the location
of the text box by
pressing the Left/
Right button.
◀▶
OK
Balloon
OK Set
◀▶
100-0020
Select an image by pressing
the Up/Down/Left/Right
button and press the OK
button. Select the third image
with the same procedure.
◀ ▶
Select the position
of image and text
box with the same
procedure.
◀ ▶
068
Move
OK Set
Press the OK button
and the file is saved
as a new file name.
OK Save
Fn
Delete
E (Effect) button: FUN
Changing the cartoon image before taking the last shot
Before saving the cartoon image, you can change the selected image.
1. Pressing the Fn button deletes the images in order.
2. Press the OK button and you can select images.
Photo Frame
You can add 9 types of frame-like borders to a still image you want
to capture. Date & Time information will not be printed on the stored
image taken with Photo Frame menu.
FUN
Photo Frame
Select Photo
Frame(
).
Pressing the Fn button
OK Save
Fn Delete
OK Search
Fn
Delete
Move
3. After selecting desired images, press the OK button to save the image
as a new file name.
1. Select (
E
Exit
Frame
OK Set
) by pressing the Up/Down button and press the OK button.
069
E (Effect) button: FUN
Preset focus frames
You can make the subject stand out from its surroundings. The subject
will be sharp and in focus while making the rest out of focus.The High
Light image is saved as under 5M image size.
High Light
FUN
Select High Light
( ).
Move
Range
E Exit
OK Set
Select a desired frame by pressing the Left/Right button and press the
OK button.
High Light
Range
High Light
OK Set
Range
<Range 1>
2. Select a desired photo frame by
pressing the Left/Right button and
press the OK button to save the image.
100-0020
High Light
Range
High Light
OK Set
<Range 3>
070
OK Set
<Range 2>
Range
OK Set
<Range 4>
E (Effect) button: FUN
Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
1. Select a focus frame by pressing the Left/Right button and press the
OK button.
2. Move the location of the frame by pressing the Up/Down/Left/Right
button.
3. Press the OK button and the file is saved as a new file name.
Composite image
You can combine 2 - 4 different shots in a still image.
The composite image is saved as under 5M image size.
FUN
Composite
Select Composite
( ).
High Light
Move
◀ ▶
OK Set
Move
OK Save
<The frame is activated>
Pressing Up/
Down/Left/ Right
button
E
Exit
Composite
◀ ▶
Pressing the
OK button
◀ ▶
Move
OK Save
OK Set
Press the OK button.
(You can select 2-4
composite images)
◀ ▶
100-0020
◀ ▶
Range
◀ ▶
Pressing the
OK button
Move
OK Set
If you press the Shutter and Play mode button, a capture
mode is executed.
The composite image is saved according to the minimum
image size among the original images.
<After changing the frame position>
071
E (Effect) button: FUN
Selecting 2 composite shots
Before selecting the last composite image, you can change a
part of composite image.
◀ ▶
Move
1. During the composite image editing, press the Fn button.
2. A previous image will be deleted. Press the OK button and you can
select a new image. After selecting an image, press the Fn button again
and the image will be deleted again.
◀ ▶
◀ ▶
Pressing the
Up/Down/Left/
Right button.
OK Set
◀ ▶
Move
OK Set
<Changing the position>
Pressing the
OK button.
Pressing the
Fn button.
100-0006
OK Search
OK
Select
1
2
3
4
5
6
E
Pressing the
OK button.
<Selecting the second image>
Select an image by pressing
the 5 function button and press
the OK button.
Change the location of second
image by pressing the Up/Down/
Left/Right button and press the
OK button. Press the OK button
again to save the image.
OK Save
072
Fn
Delete
Delete
OK Search
Fn
Delete
3. Press the OK button and you can select an image again.
OK Search
Back
Fn
Fn
Delete
Before selecting the last composite image, you can change a
part of composite image.
1. Select the image you want to delete, and press the Fn button.
2. The selected composite image will be deleted. Press the OK button and
you can select a new image.
E (Effect) button: FUN
Sticker
Colour Filter
You can add various stickers to the image.
The Sticker image is saved as 1M image size.
With this menu, you can change the colour information of the image
(excluding Red, Blue, Green and Yellow) to Black and White.
1. Select (
FUN
Select (
Move
E
).
Exit
FUN
Sticker
Select a location
of sticker by
pressing the Up/
Down/Left/Right
button.
Fn
Add
100-0016
Move
E
Exit
E
Back
OK Set
2. Press the OK button and the image is saved as a new file name.
OK Save
◀ ▶
◀ ▶
OK Save
Move
Color Filter
OK Set
Select a desired sticker
by pressing the Left/
Right button and press
the OK button.
◀ ▶
) by pressing the Up/Down button.
Sticker
◀ ▶
Move
Fn
Add
You can add additional stickers
(Max. 2 stickers) by pressing the
Fn button. Press the OK button to
store the image.
073
E (Effect) button: FUN
Colour mask
With this menu, you can select a part you want to highlight. The rest of the image will be in black and white.
Color Mask
FUN
Press the OK button and you
can set the size and location of
the part.
Select (
) and a mark for
selecting part will display.
E
Back
E
Exit
◀ ▶
OK Set
Move
OK Set
◀ ▶
Move
T/W Size
W/T button: Changing size of part
100-0020
◀ ▶
OK Set
◀ ▶
<Final image>
Pressing the OK button and the
colour mask image will be saved ass
a new file name.
e
You set the size and location of the
part by pressing the E button.
Pressing the
OK button.
E
Back
Move
T/W Size
Up/Down/Left/Right button:
Changing the location
OK Save
◀ ▶
OK Set
◀ ▶
074
Move
T/W Size
Setting up the play back function using the LCD monitor
Play mode functions can be changed by using the LCD monitor.
In the Play mode, pressing the MENU button displays the menu on the
LCD monitor. The menus you can set up in Play mode are as follows.
To capture an image after setting up the play menu, press the Play
mode button or Shutter button.
Menu Tab Main Menu
Show Start
SLIDE
SHOW
(
)
PLAY
BACK
(
)
Sub Menu
Sub Menu
Play / Repeat Play
–
All
Images
Date
–
Select
Off
Basic
Classic
Effect
Memories
Rhythmic
Delight
Interval
1, 3, 5, 10 sec
–
Off / Panorama/First
Music
smile/Remembrance/
–
My Music
Off
–
Voice Memo
On
–
Select
Protect
Unlock / Lock
All
Select
–
Delete
All
No / Yes
Select / All /
Standard
Cancel
DPOF
Index
No / Yes
Select / All /
Size
Cancel
No
–
Copy To
Yes
–
Card
Page
p.76
This menu is available while the camera is connected to a PictBridge
supporting printer (direct connection to the camera, sold separately)
with a USB cable.
Menu Tab Main Menu
Images
Sub Menu
Sub Menu
One Pic
–
All Pics
–
Auto
–
p.77
PostCard
–
Card
–
p.77
4X6
–
p.78
Size
p.78
p.79
p.79
p.79
Layout
p.80~82
p.82
L
–
2L
–
Letter
–
A4
–
A3
–
Auto
–
Full
–
1
–
2
–
4
–
8
–
9
–
16
–
Index
–
Page
p.93
p.94
075
Setting up the play back function
using the LCD monitor
Menu Tab Main Menu
Type
Quality
Date
File Name
Reset
Sub Menu
Page
1. Press the Play mode button and press the MENU button.
2. Press the Left/Right button and select the [SLIDE SHOW] menu tab.
Auto
-
Start the slide show
The slide show can start only in the [Show Start] menu.
Photo
-
FastPhoto
-
Auto
-
Draft
-
Normal
-
Fine
-
Auto
-
Off
-
On
-
Auto
-
Off
-
On
-
No
-
Yes
-
p.94
)
Images can be displayed continuously at pre-set intervals. You can
view the slide show by connecting the camera to an external monitor.
Plain
Menus are subject to change without prior notice.
076
Sub Menu
Starting the slide show (
1. Use the Up/Down button to select the
[Show Start] menu and press the Right SLIDE SHOW
Show Start
Play
button.
Images
Repeat Play
2. Select a desired sub menu by pressing
Effect
the Up/Down button.
Interval
Music
[Play]: The slide show is closed after
one cycle.
OK Set
Back
[Repeat Play]:The slide show is
repeated until cancelled.
3. Press the OK button and the slideshow will be started.
– To pause the slide shown while playing it back, press the Play &
) button again.
Pause (
– Pressing the Play & Pause (
) button again will cause the slide
show restart.
)
– To stop playback of the slide show, press the Play & Pause (
button, and then press the OK/MENU button.
Starting the slide show (
)
Selecting Images
Configure slide show effects
You can select image to view.
Unique screen effects can be used for the slide show.
1 Use the Up/Down button to select the
[Image] menu and press the Right
SLIDE SHOW
Show Start
button.
All
Images
2. Select a desired sub menu by pressing
Date▶
Effect
Select▶
Interval
the Up/Down button.
Music
[All]:
All images saved in the
Memory are played back.
OK Set
Back
[Date]: Images taken on a specified
date are played back.
[Select]: Play only the selected images.
If you press the Right button, you can select the desired
images to play back.
The selected image can be saved as [Select 1], [Select 2] and
[Select 3]. If you save the selected image with the [New Select]
command, it will be saved as [Select 1]. But when a new
image is saved again using [New Select], the former image
which had been saved as [Select 1] will be saved as [Select 2]
automatically. You can change and cancel the images which
were saved as [Select 1], [Select 2] and [Select 3].
3. Press the OK button and the settings are saved.
1. Select the [Effect] sub menu by pressing
the Up/Down button and press the
Right button.
2. Use the Up/Down button to select the
type of effect.
3. Press the OK button to confirm the
setting.
SLIDE SHOW
Show Start
Images
Effect
Interval
Music
Back
Off
Basic
Classic
Memories
Rhythmic
Delight
OK Set
– When the effect is selected, the background music is changed
according to the default setting of the effect.
Effect
Description
[Off], [Basic]
No background music.
[Classic]
Background music is set to [Remembrance].
[Memories]
Background music is set to [Remembrance].
[Rhythmic]
Background music is set to [First Smile].
[Delight]
Background music is set to [Panorama].
You can change the desired music for each effect.
077
Starting the slide show (
)
Setting play interval
Setting Background Music
Set the slide show play interval.
Set the slide show music.
1. Select the [Interval] sub menu by
pressing the Up/Down button and press
the Right button.
2. Use the Up/Down button to select the
desired interval.
3. Press the OK button to save the
configuration.
SLIDE SHOW
Show Start
Images
Effect
Interval
Music
Back
1 sec
3 sec
5 sec
10 sec
OK Set
The loading time depends on the image size and quality.
While the slide show is playing, only the first frame of a movie
file is displayed.
While the slide show is playing, the voice recording file will not
display.
[Interval] is available when the effect is set to [Off], [Basic],
[Classic] in the slide show. It is unavailable when the effect is set to
[Memories], [Rhythmic], [Delight] in the slide show.
078
1. Select the [Music] sub menu by pressing
the Up/Down button and press the
SLIDE SHOW
Show Start
Right button.
Images
2. Use the Up/Down button to select the
Effect
Interval
desired Music.
Music
3. Press the OK button to save the
Back
configuration.
[Off]: Background music is not played back.
[Panorama], [First smile], [Remembrance], [My Music]:
Selected music is played back.
Off
Panorama
First Smile
Remembrance
My Music
OK Set
Playback (
)
Voice memo
You can add your voice to a stored still image.
100-0016
100-0016
PLAYBACK
Voice Memo
Off
Protect
On
Delete
DPOF
Copy To Card
00:00:00
Back
OK Set
<Voice memo menu>
00:00:06
SH Start
SH Stop
<Ready for recording>
<Voice is recording>
– Press the Shutter button to take a picture. The images are saved
on the memory. After saving the image, the voice is recorded for 10
seconds.
– To stop the recording, press the Shutter button.
Protecting images
(Lock) This is used to protect specific
shots from being accidentally erased.
(Unlock) This unprotects images that have
previously been protected .
1. Press the Up/Down button and select
the [Protect] menu tab. And then press
the Right button.
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[Select]: Selection window for an image
to be protected / released is
displayed.
100-0016
Protect All?
Unlock
Lock
OK
Confirm
Deleting images
PLAYBACK
Voice Memo
Protect
Delete
DPOF
Copy To Card
Select
All
OK Set
Back
100-0020
T/W Unlock
– Up/Down/Left/Right button: Select
an image.
– Zoom W/T button: Protect / release
the image.
– OK button: Your changes will be
saved and the menu will
disappear.
[All]: Protect / release all saved images.
– If you protect an image, the protect
icon will be displayed on the LCD
monitor. (An unprotected image has
no indicator)
– An image in Lock mode will be
protected from the delete function or
[Delete] functions, but will NOT be
protected from the [Format] function.
1
2
3
4
5
6
OK
Set
This deletes images stored on the memory card.
1 Press the Up/Down button and select
the [Delete] menu tab. And then press
PLAYBACK
Voice Memo
the Right button.
Protect
2. Select a desired sub menu by pressing
Delete
the Up/Down button and press the OK
DPOF
Copy To Card
button.
[Select]: Selection window for an image
OK
Back
to delete is displayed.
– Up/Down/Left/Right button: Select an image.
– Zoom T button: Select the image for deletion. (V mark)
Select
All
Set
079
Playback (
)
– OK button: Press the OK button to
display the confirmation
message. Select the [Yes]
menu and press the OK
button to delete marked
images.
[All]: Displays confirmation window.
Select the [Yes] menu and
press the OK button to delete
all unprotected images. If there
are no protected images, all the
images are deleted and a [No
Image!] message will display.
3. After deletion, the screen will be
changed to the play mode screen.
DPOF
100-0020
T
1
2
3
4
5
6
Select
OK
Delete
Delete All?
No
Yes
OK Confirm
Of all the files stored in the memory card, the unprotected files
in the DCIM subfolder will be deleted. Remember that this
will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place.
The startup image is stored in the camera’s internal memory
(i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
080
DPOF(Digital Print Order Format) allows you to embed printing
information on your memory card’s MISC folder. Select the pictures to
be printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image
that has DPOF information plays back. Images can then be printed on
DPOF printers, or at an increasing number of photo labs.
This function is not available for movie clips and voice recording files.
When the wide angle image is printed as a wide angle print, 8% of the
left and right side of the image may not be printed. Check that your
printer can support the wide angle image when you print the image.
When you print the image at a photo lab, request that the image is
printed as a wide angle image. (Some photo labs may not support the
wide angle size print.)
Playback (
)
Standard
Index
This function allows you to embed printing quantity information on a
stored image.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
the Right button.
2. Press the Right button again and
[Standard] sub menu will display.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[Select]: Selection window for an image
to print is displayed.
– Up/Down/Left/Right button: Select
an image to print.
– Zoom W/T button: Select the number
of prints.
[All]: Configure number of prints for all
pictures except movie and voice
files.
– Zoom W/T button: Select a number
of prints.
[Cancel]: Cancel the print setup.
Images (except for movie clips and voice file) are printed as index type.
Select
All
Cancel
Standard
Index
Size
OK Set
Back
100-0020
1
2
4
W
◀
No
Yes
3
5
0 images
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
Standard
the Right button.
Index
2. Press the Right button again and [Index] Size
sub menu will be displayed.
3. Select a desired sub menu by pressing
the Up/Down button.
OK Set
Back
If [No] is selected: Cancel the index
print setting.
If [Yes] is selected: The image will be printed in index format.
4. Press the OK button to confirm the setting.
6
▶
T
OK Set
W
◀
0 images
▶
T
OK Set
4. Press the OK button to confirm the setting. If an image carries DPOF
instructions, the DPOF ( ) indicator will show.
081
Playback (
)
Print size
You can specify the print size when printing images stored on the memory
card. The [Size] menu is available only for DPOF 1.1 compatible printers.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
Select
Standard
the Right button.
All
Index
2. Press the Right button again and select Size
Cancel
the [Size] sub menu will be displayed.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
OK Set
Back
button.
100-0020
[Select]: Selection window for an image
to be changed printed size is
1
2
3
displayed.
– Up/Down/Left/Right button: Select
4
5
6
an image.
Cancel
▶ T
W ◀
– Zoom W/T button: Change the print
OK Set
size.
– OK button: Your changes will be
saved and the menu will disappear.
[All]: Change print size of all saved images.
Cancel
▶ T
W ◀
– Zoom W/T button: Select a print
size.
– OK button: Confirm the changed
OK Set
setting.
[Cancel]: Cancel all of the print size settings.
DPOF [Size] secondary menu: Cancel, 3X5, 4X6, 5X7, 8X10
082
Depending on the manufacturer and print model, cancelling the
printing may take a little longer for the printer to process.
Copy To Card
This enables you to copy image files, movie clips and voice recording
files to the memory card.
PLAYBACK
Voice Memo
1. Select the [Copy To Card] menu tab by
pressing the Up/Down button. And then Protect
Delete
press the Right button.
DPOF
No
Copy To Card
2. Select a desired sub menu by pressing
Yes
the Up/Down button and press the OK
OK
Set
Back
button.
– [No]: Cancels [Copy to Card].
– [Yes]: All images, movie clips and voice recording files saved in
the internal memory are copied to the memory card after the
[Processing!] message is displayed. After copying has been
completed, the screen will return to play mode.
Playback (
)
When this menu is selected without inserting a memory
card, the [No Card!] message will be displayed.
If there is not enough space available in the memory card
to copy saved images in the internal memory (190MB), the
[Copy To Card] command will copy only some of the images
and display [Memory Full!] message. Then the system will
return to the Playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the
memory card into the camera.
When you move the images that are stored in the internal
memory by doing [Copy To Card] to the card, the next
number of file names will be created in the card to avoid
duplication of the file name.
– When the [Reset] of the [File] setup menu is set: The
copied file names start from after the last stored file
name.
– When the [Series] of the [File] setup menu is set: The
copied file names start from after the last captured file
name. After completing [Copy To Card], the last stored
image of the last copied folder is displayed on the LCD
monitor.
Sound menu
In this mode, you can set up sound settings. You can use the setup menu in
all camera modes, except Voice recording mode.
The items indicated by
Mode
Menu
are default settings.
Sub Menu
Available Mode
Page
Off
Volume
Low
Medium
High
Off
Start Sound
Sound 1
Sound 2
Sound 3
Off
Shutter
Sound
Sound 1
Sound 2
p.84
Sound 3
(SOUND)
Off
Beep Sound
Sound 1
Sound 2
Sound 3
AF Sound
Self Portrait
Off
On
Off
On
083
Sound (
)
Volume
You can set select a volume of start up
sound, shutter sound, beep sound and AF
sound.
– [Volume] sub menu: [Off], [Low],
[Medium], [High]
Beep Sound
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
Off
Low
Medium
High
– [Beep Sound] sub menu: [Off],
[Sound 1, 2, 3]
OK Set
Start up sound
You can select the sound that is activated
whenever the camera is turned on.
– Start Sound: [Off], [Sound 1],
[Sound 2], [Sound 3]
– If the start up image is set to [Off], the
start up sound will not activate, even
though you may have set these to on.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
Off
Sound 1
Sound 2
Sound 3
If you set AF sound to on, AF sound will
be activated when the Shutter button is
pressed down half way so that you can be
aware of the camera operation status.
– [AF Sound] sub menu: [Off], [On]
OK Set
Back
Off
Sound 1
Sound 2
Sound 3
OK Set
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
Off
On
OK Set
Self Portrait
You can select the shutter sound.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
084
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
AF sound
Shutter sound
– Shutter Sound: [Off], [Sound 1],
[Sound 2], [Sound 3]
If you set sound to on, various sounds
will be activated for camera startup, when
MENU/OK button is pressed, so that you
can be aware of the camera operation
status.
Off
Sound 1
Sound 2
Sound 3
OK Set
This feature automatically detects the
location of the face and optimises the
camera settings to ensure a great self
portrait.
– This feature can be set by using the [Off]
and [On] buttons.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
Off
On
OK Set
Setup menu
In this mode, you can set up basic settings. You can use the setup
menu in all camera modes, except Voice recording mode.
The items indicated by
Sub menu
한국어
ENGLISH
Language
DANSK
Page
FRANÇAIS
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
Date&Time
p.86
POLSKI
Magyar
–
–
yy/mm/dd
Samoa, Midway
Honolulu, Hawaii
Alaska
LA, San Francisco Denver, Phoenix
LCD
p.86
Chicago, Dallas New York, Miami
Caracas, La Paz
Newfoundland
Buenos Aires
Mid-Atlantic
–
Off
Logo
User Image
–
Auto
Dark
Normal
Bright
0.5, 1, 3sec
p.87
mm/dd/yy
Quick View
Off
Rome, Paris, Berlin
LCD Save
Off
On
Moscow
Format
No
Yes
p.88
Teheran
Abu Dhabi
Reset
No
Yes
p.88
Kabul
Tashkent
File
Reset
Series
p.89
Off
Date
Date&Time
–
London
Athens, Helsinki
World Time
Wellington,
Auckland
Cape Verde
Start Image
Off
dd/mm/yy
Date&Time
World
Time
Page
Okhotsk
SETUP1
BAHASA
SETUP1
Sub menu
Guam, Sydney
are default settings.
Menu tab Main menu
DEUTSCH
Menu tab Main menu
Mumbai, New
Delhi
Kathmandu
Almaty
Yangon
Bankok, Jakarta Beijing, Hong Kong
Seoul, Tokyo
Darwin, Adelaide
p.86
Imprint
SETUP2
p.90
Power Off
1, 3, 5, 10min
–
p.90
Video Out
NTSC
PAL
p.91
AF Lamp
Off
On
p.92
Menus are subject to change without prior notice.
085
SETUP1 ( )
Language
Setting up the Date / Time / Date type
There is a choice of languages that can be displayed on the LCD
monitor. Even if the battery is removed and inserted again, the
language setting will be preserved.
You can change the date and time that will
be displayed on the captured images and
set up the date type.
– Language sub menu:
English, Korean, French, German,
Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch,
Danish, Swedish, Finnish, Thai,
Bahasa (Malay/Indonesian), Arabic,
Czech, Polish, Hungarian and Turkish
086
– Date type: [yy/mm/dd], [Off],
[dd/mm/yy], [mm/dd/yy].
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
ENGLISH
한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
OK Set
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
London
2008 / 01 / 01
13:00
yy/mm/dd
OK Set
– World time
Available cities:
London, Cape Verde, Mid-Atlantic,
Buenos Aires, Newfoundland, Caracas, World Time
La Paz, New York, Miami, Chicago,
Dallas, Denver, Phoenix, LA, San
Francisco, Alaska, Honolulu, Hawaii,
Seoul, Tokyo
Samoa, Midway, Wellington, Auckland,
[GMT +09:00] 2008 / 01 / 01 13:00 PM
Okhotsk, Guam, Sydney, Darwin,
OK Set
DST
Adelaide, Seoul, Tokyo, Beijing, Hong
Kong, Bankok, Jakarta, Yangon, Almaty, Kathmandu, Mumbai, New
Delhi, Tashkent, Kabul, Abu Dhabi, Teheran, Moscow, Athens, Helsinki,
Rome, Paris, Berlin
– [DST] (Daylight Saving Time): Press the Up button to set up [DST].
( ) icon will appear in front of the city
name.
SETUP1 ( )
Start up image
Quick view
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only with still images.
– Sub menus: [Off], [LOGO], [User Image]
– Use a saved image for the start-up
image with the [Start Image] in the
[RESIZE] menu in the play mode.
– The start-up image will not be deleted
by [Delete] or [Format] menu.
– The User images will be deleted by
[Reset] menu.
– Sub menus
[Off]:
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
OFF
OK Set
The quick view function
can’t be activated.
[0.5, 1, 3 sec]: The captured image is
briefly displayed during
the selected time.
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
Off
0.5 sec
1 sec
3 sec
OK Set
LCD brightness
LCD save
You can adjust the LCD brightness.
If you set the [LCD save] to On and the camera isn’t operated during
the specified time, the LCD monitor will be turned off automatically.
– Sub menus:
[Auto], [Dark], [Normal],
[Bright]
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
Auto
Dark
Normal
Bright
OK Set
– Sub menus
[Off]:
The LCD monitor will not be
turned off.
[On]:
If the camera isn’t operated
during the specified time (about
30 SEC.), the camera power
will be idle (Camera status
lamp:Blinking) automatically.
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
Off
On
OK Set
087
SETUP2 ( )
Formatting a memory
If you run [Format] on the memory, all files which are image, video
clip, multimedia, world tour guide and even protected images will be
deleted. So be sure to download important files to your PC before
formatting the memory.
– Sub menus
[No]: The memory will not be formatted.
[Yes]: A window for confirming the
selection displays.
SETUP2
Format
Reset
File
Imprint
Power Off
Video Out
Back
If you select the [Yes] menu, another
window for confirming the selection will
be displayed.
No
Yes
OK Set
Formatting the memory will delete all
data on the memory (Images, MP3,
PMP, Text and World Tour Guide files)
No
Yes
Formatting the memory will delete all
data on the memory (Images, MP3,
PMP, Text and World Tour Guide files)
Format?
Keep Folder
Delete Folder
088
Be sure to run [Format] on the following types of memory card.
– A new memory card, or an unformatted memory card
– A memory card that has a file this camera can’t recognise or one that
has been taken from another camera.
– Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras, memory
card readers, or PCs, you will get a [Card Error!] message.
Format?
[Keep Folder]: Folders are remained
even though the memory
is formatted.
[Delete Folder]: All folders as well as all
files are deleted.
– A [Processing!] message appears and the memory will be formatted.
If you run FORMAT in Play mode, a [No Image!] message will
appear.
Initialisation
All camera menu and function settings will be restored to their default
values. However, values for Date/Time, Language, and Video will not
be changed.
– Sub menus
[No]:
Settings will not be restored to
their defaults.
[Yes]: A window for confirm the
selection displays. Select the
[Yes] menu and all settings will
be restored to their defaults.
SETUP2
Format
Reset
File
Imprint
Power Off
Video Out
Back
No
Yes
OK Set
SETUP2 ( )
File name
This function allows the user to select the
file naming format.
SETUP2
Format
Reset
File
Imprint
Power Off
Video Out
Back
File name
Reset
Series
OK Set
The first stored folder name is 100SSCAM, and the first file
name is SDC10001.
File names are assigned sequentially from SDC10001
SDC10002 ~ SDC19999.
The folder number is assigned sequentially from 100 to 999 as
follows: 100SSCAM 101SSCAM ~ 999SSCAM.
Maximum numbers of files in a folder are 9999.
The files used with the memory card conform to the DCF
(Design rule for Camera File systems) format. If you change
the image file name, the image may not play back.
Description
[Reset]
After using the reset function, the next file name will be set
from 0001 even after formatting, deleting all or inserting a
new memory card.
[Series]
New files are named using numbers that follow the previous
sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures.
089
SETUP2 ( )
Imprinting the recording date
Auto power off
There is an option to include DATE/TIME on still images.
This function switches the camera off after a set amount of time in order
to prevent unnecessary battery drainage.
– Sub menus
[Off]:
The DATE & TIME will
SETUP2
not be imprinted on the
Format
image file.
Reset
File
[Date]:
Only the DATE will be
Off
Imprint
imprinted on the image
Date
Power Off
file.
Date&Time
Video Out
OK Set
Back
[Date&Time]: The DATE & TIME will be
imprinted on the image file.
The Date & Time are imprinted at the bottom right side of the still image.
The imprint function is applied only to still images except for the images
taken in [Photo Frame] effect mode.
Depending on the manufacturer and print mode, the date printed on an
image may not be printed correctly.
090
– Sub menus
[1, 3, 5, 10 min]: The power will turn off
SETUP2
automatically if not used
Format
for the period of time
Reset
1 min
File
specified.
3 min
Imprint
– After replacing the battery, the [Power
5
min
Power Off
10 min
Video Out
Off] setting will be preserved.
OK Set
Back
– Note that the automatic [Power Off]
function will not operate if the camera is in the PC/Printer mode, slide
show, playing back a voice recording and playing back a movie clip.
SETUP2 ( )
Selecting video out type
The Movie output signal from the camera can be NTSC or PAL. Your
choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only
BDGHI.
Yellow - Video
White - Sound
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor and the LCD monitor of
the camera.
SETUP2
Format
Reset
File
Imprint
Power Off
Video Out
Back
Selecting Video
out type
NTSC
PAL
OK Set
Description
NTSC
U.S.A, Canada, Japan, South Korea, Taiwan,
Mexico.
PAL
Australia, Austria, Belgium, China, Denmark,
Finland, Germany, U.K., Holland, Italy, Kuwait,
Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
– When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
– There will be a digital noise on the external monitor, but it is not a
malfunction.
– If the image is not in the centre of the screen, use the TV controls to
centre it.
– When the camera is connected to an external monitor, some parts of
the image may not be displayed.
– When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as
those indicated on the LCD monitor.
– When the camera is connected to an external monitor, the button sound
may not function.
091
SETUP2 ( )
PictBridge
Auto focus lamp
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice files cannot be printed.
You can turn on and off the Auto Focus lamp.
– Sub menus
[Off]: The AF lamp will not light up in low
light conditions.
[On]: The AF lamp will light up in low
light conditions.
Setting up the camera for connection to the printer
SETUP2
Reset
File
Imprint
Power Off
Video Out
AF Lamp
Back
Off
On
1. Connect the camera and printer with
USB cable.
2. Select the [Printer] menu by pressing
Up/Down button and press the OK
button.
Select USB
Computer
Printer
OK Set
OK Confirm
■ Connecting the Camera to a Printer
092
PictBridge
PictBridge: Picture Selection
If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge
compatible printer to the camera through USB cable with [Connecting
Computer] message. In this case, remove the cable and do the step 1 and
2 again.
Easy printing
When you connect the camera to printer in
the Play back mode, you can print a picture
easily.
– Pressing the Left/Right button:
Selects a previous / next image.
– Pressing the Print ( ) button:
Currently displayed image will be
printed with the printer’s default setting.
100-0016
Print
OK Menu
You can select images you want to print.
Setting the Number of Copies to Print
1. Press the MENU button and the
PictBridge menu will be displayed.
PICTBRIDGE
One Pic
Images
2. Use the Up/Down button to select the
All Pics
Size
[Images] menu and press the Right
Layout
Type
button.
Quality
3. Use the Up/Down button to select a
Date
desired sub menu and press the OK
OK Set
Back
button.
– Select [One Pic] or [All Pics]. A screen where you can set the
number of copies to print will appear as shown below.
Prev ◀ ▶ Next
SH Exit
OK Set
<When [One Pic] is selected>
SH Exit
OK Set
<When [All Pics] is selected>
– Press the Up/Down button to select the number of prints.
– When [One Pic] is selected: Use the Left/Right button to select
another picture. After selecting another picture, select the number of
prints for another picture.
– After setting the number of prints, press the OK button to save.
– Press the Shutter button to return to the menu without setting the
number of prints.
4. Press the Print (
) button and images will be printed.
093
PictBridge: Print Setting
PictBridge: Reset
You can select the Paper Size, Print Format, Paper Type, Print Quality,
Date Print, and File Name Print menus for printed pictures.
Initialises user-changed configurations.
1. Press the MENU button and the
PictBridge menu will be displayed.
2. Use the Up/Down button to select the
desired menu, and then press the Right
button.
3. Use the Up/Down button to select the
desired sub menu value, and then press
the OK button.
PICTBRIDGE
Images
Size
Layout
Type
Quality
Date
Auto
Postcard
Card
4x6
L
2L
OK Set
Back
Menu
Function
Sub menu
[Size]
Set the size of the printing
paper.
Auto, PostCard, Card, 4X6,
L, 2L, Letter, A4, A3
[Layout]
Set the number of pictures
to be printed on a sheet of
paper.
Auto, Full, 1, 2, 4, 8, 9, 16,
Index
[Type]
Set the quality of the
printing paper.
Auto, Plain, Photo,
FastPhoto
[Quality]
Set the quality of the
picture to be printed.
Auto, Draft, Normal, Fine
Set whether to print the
date.
Auto, Off, On
Set whether to print the file
name.
Auto, Off, On
[Date]
[File Name]
Some menu options are not supported on all printers. If not supported, the
menus are still displayed in the LCD, but are not selectable.
094
1. Use the Up/Down button to select the
[Reset] menu tab. And then press the
PICTBRIDGE
Layout
Right button.
Type
Reset?
2. Use the Up/Down button to select the
Quality
No
Yes
desired sub menu value, and then press Date
No
File Name
the OK button.
Yes
Reset
If [Yes] is selected: All print and image
OK Set
Back
settings will be reset.
If [No] is selected: Settings will not be reset.
Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came
with your printer.
MP3 / PMP / TEXT VIEWER mode
This camera has an embedded MP3, TEXT VIEWER & Portable Media
Player program. You can take a picture, listen to the MP3 files and watch
the movie clip (Movie and Video clip) whenever you want. To use the PMP
mode, you must convert the multimedia file with the Samsung Converter.
In the TEXT VIEWER mode you can see the text on the LCD monitor with
listening MP3 music.
If the file or folder name is over 120 (Including 1 Byte/2 Byte language,
Korean, Chinese, etc.) characters, the file or folder name doesn’t appear
on the play list.
Downloading files
To use MP3, PMP and TEXT VIEWER functions, MP3, PMP
(multimedia files) and TEXT files must be saved in the internal memory
or memory card of this camera.
1. Save the desired files on your PC.
2. Connect the camera to your PC with the USB cable and turn on the
camera.
3. Open Window’s EXPLORER and search for Removable Disk.
4. Make a folder under the Removable Disk.
MP3 Mode: [MP3]
PMP Mode: [PMP]
TEXT VIEWER mode: [TEXT]
5. Select files that you want to save and copy them to the desired folder.
095
Starting the MP3 / PMP / TEXT VIEWER mode
Take care of the illegal duplication of MP3 & multimedia files. It
violates various copyright laws.
Without permission of Samsung, you cannot copy, modify
and/or distribute any part or all of MP3, PMP file provided in
the internal memory.
This camera can only play back MP3 files in the MP3 mode
and SDC files (modified XviD MPEG4 video / MPEG Layer2
audio type) in the PMP mode.
If a file can not be played back on this camera, convert it into
the supported file format by using the Samsung Converter.
(p.126~127)
Up to 200 files and 100 sub folders can be saved in a folder.
It is limited to save the files and sub folders up to 200 in total at
the same time.
New folders can be created within the MP3, PMP and TEXT
folders. Otherwise any files in other folders that you create
cannot be played back.
Insert the memory card that holds MP3, PMP and TEXT files. As this
camera has a 190MB internal memory, you can save the files on the
internal memory too.
1. Select a desired Multi media mode. (p.97)
2. A menu will display as shown.
[Resume]:
Memorizes the latest
stopped frame.
MP3 mode: Plays back from the
beginning of the file.
PMP mode: Plays back from the latest
stopped frame.
TEXT VIEWER mode: Plays back from
the latest stopped
frame.
[Open]: The browsing menu will be
displayed to select a desired
file.
SHOOTING
MULTIMEDIA
MP3
In this mode you can play MP3 files.
SCENE
Resume
3. Select a desired file and press the OK
button. And then the file will play back.
Open
OK Confirm
096
Starting the MP3 / PMP / TEXT VIEWER mode
<MP3 mode>
03-Audio Track 03.mp3
01-Audio Track 01.mp3
Move
OK Select
<PMP mode>
[SDC]-move sample.sdc
Who bent my camera?
Move
OK Select
<TEXT VIEWER mode>
TEST.TXT
TEST.TXT
Thank you for buying a Samsung Camera.
This manual will guide you through using the
camera, includin capturing images, downloading
images and using the application software.
Please read this manual carefully before using your
new camera.
Move
OK Select
When the [Resume] menu (p.102) of each mode are set as [Off], the
browsing menu doesn’t open. If the last played file was deleted, the
browsing menu opens though the setting is the same as above.
The order of play lists on the browsing menu and the order of files
saved in the memory are the same.
A title coded with unsupported language is displayed as “--------”.
The automatic power off function will not operate if a file is playing
back.
If there are over 100 files or a lot of large files in the sub folder, it takes
a little longer for the camera to process to the MP3 / PMP mode.
If there is no operation during the specified time (About 30 sec.) in
the MP3 / TEXT VIEWER mode (B.G.M: Off, Auto scroll: Off), the
LCD monitor is turned off automatically and the camera status lamp
blinks. To use the camera, press any of the camera buttons except
the POWER button.
Playing back a VBR (Variable Bit Rate) file. A VBR file varies
the amount of output data in each time segment based on the
complexity of the input the data in that segment. When the VBR
encoded files are played back, the LCD will appear as shown.
– The VBR icon will be displayed instead of the Bit rate icon.
– Playing time will display but the whole running time doesn’t display.
For about 2 seconds of the start and end frames of the PMP file, no
camera button except the POWER button can be operated.
When an MP3 file doesn’t play back correctly, download a free MP3
conversion program and convert it before using the MP3 file on the
camera.
Depending on the file type, the movie may be paused during playing
back in the PMP mode. The movie restarts automatically and it is
not a camera malfunction.
097
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode
The LCD monitor displays information about the MP3, multimedia and
Text file.
MP3 mode
Battery (p.15)
Lock (p.100)
Equalizer (p.100)
Mute (p.99)
Playing time
Current page/Whole page
Indication of present TEXT
TEXT VIEWER mode
Battery (p.15)
TEST.TXT
Thank you for buying a Samsung Camera.
Encoding Type
(ANSI, Uni)
Volume Indication
(p.99)
This manual will guide you through using the camera,
TEXT Contents
including capturing images, downloading images and
using the application software.
Please read this manual carefully before using your
Title of file
Play & Pause /
Control button (p.99)
Bit rate (p.97)
Playback mode (p.102)
Volume (p.99)
Time line
Status bar
PMP mode
Battery (p.15)
Lock (p.100)
Search speed
Volume (p.99)
Equalizer (p.100)
Mute (p.99)
Encoding Type: ANSI (American National Standards Institute) Type,
Uni (Unicode) Type
– When the ANSI encoding type is displayed:
You should set the Language of the TEXT VIEWER menu to view the
text. Set the Language menu as one that is the same as the Operating
System language that the text was created.
– When the UNI encoding type is displayed:
The text file will be displayed with any language menu.
If the text file size is over 10MB, it may take a long time or even be
impossible to view the text file. In this case, please divide the text file.
Who bent my camera?
098
<TEXT VIEWER mode>
<MP3 mode>
Title of file
Play & Pause/
Seeking button (p.99)
new camera.
<PMP mode>
Caption (p.126)
Using the camera buttons to adjust the camera
Volume button
Delete button
You can control the volume with this
button. There are 0 ~ 30 steps.
This deletes files stored on the memory.
– Mute ( ): You can mute the MP3
sound with the Up button.
Play & Pause / Seeking button
When a file is playing back, press the Down button to pause the file.
Pressing it again will resume playback.
MP3 mode
You can search the MP3 files by pressing the Left/Right button.
PMP mode
You can search the Multimedia files by pressing the Left/Right button.
You can search a desired frame of the file during play back by pressing
the Left/Right button. (2X-32X)
TEXT VIEWER mode
When the text list menu is displayed: select a text file by pressing the
Up/Down button.
When the text is displayed: press the Up/Down button and previous
/ next page of the file will be displayed. Press and hold the Up/Down
button and it will skip 10 pages at a time.
1. Select a desired file to delete on the
browsing menu and press the Delete
button.
2. A message will appear as shown
[No]:
Cancels “Delete files” and the
browsing menu will display.
[Yes]: Deletes the selected file.
Delete?
No
Yes
OK
Confirm
Before deleting files from the camera, take care to download
files you want to keep to your computer.
099
Using the camera buttons to adjust the camera
Hold / Equalizer button
If you press the Hold button for more than 1 second, the camera buttons
are locked.
– If the camera buttons are locked, the
buttons can’t be operated while playing
back. But Power off, Video out, USB
connection and LCD on functions can
be operated.
Playlist button
While a multimedia file is playing back, you can select a desired file by
using the browsing menu.
) button.
1. While a multimedia file is playing back, press the Playlist (
2. A playlist that is currently playing will be highlighted.
3. Move the cursor to a desired list by pressing the Control button.
Pressing the OK button: the selected file is played back. Pressing the
) button: the selection will be cancelled.
Playlist (
03-Audio Track 03.mp3
[SDC]-move sample.sdc
TEST.TXT
01-Audio Track 01.mp3
Move
OK Select
<MP3 Mode>
– If you press the Lock button again or turn off the camera, the camera is
unlocked.
The user can select appropriate
sound with this setting.
– Press the E button and select either
<SRS>, <Normal>, <Live>, <Classic>,
<Jazz>, <Rock> or <Dance>.
100
Move
OK Select
<PMP Mode>
Move
OK Select
<TEXT VIEWER Mode>
Setting up the playback function using the LCD monitor
MP3 / PMP / Text Viewer mode functions can be changed by using the
LCD monitor. Press the MENU button and the menu will be displayed
on the LCD monitor.
Menu tab Main menu
Resume
Play Mode
MP3 Skin
MP3
Sub menu
Off
Play All
Repeat One
Repeat All
Shuffle
Default 1
Default 2
User Skin 1
User Skin 2
p.102
Auto Scroll
p.102
Show Play
Play/Repeat Play
2, 3, 5 sec
Delete All
No
Yes
p.103
Information
of DRM file
-
-
p.104
Resume
On
Off
p.102
Normal
30 sec
1 min
3 min
5 min
10 min
Player
Display
5sec
On
Off
–
Delete All
No
Yes
Seeking
PMP
Resume
p.102
Show Interval
Slide Show
Menu
Main menu
tab
Page
On
MP3 BGM
TEXT
VIEWER
p.103
Off
Off
0.8 sec
1.1 sec
p.104
2.3 sec
On
p.105
ENGLISH
한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
DANSK
Delete All
p.102
1.4 sec
2.0 sec
Off
Language
p.103
Page
On
1.7 sec
p.103
p.104
Sub menu
BAHASA
POLSKI
Magyar
-
No
Yes
p.105
p.103
Menus are subject to change without prior notice.
101
Setting up the playback function using the LCD monitor
Resume
Play mode
You can set the playback type.
You can set various repeat and shuffle options. This function is adopted
only in the selected folder.
1. Press the MENU button in each mode.
2. Select a desired playing type in the [Resume] menu by pressing the
Up/Down button and pressing the OK button.
RESUME
On
Off
Move
RESUME
On
Off
Exit
<MP3 mode>
[Off]:
[On]:
Move
RESUME
On
Off
Exit
<PMP mode>
Move
[Play All]: Plays a single track once.
[Repeat One]: Plays a single track
repeatedly.
[Repeat All]: Plays all tracks in the folder
repeatedly.
[Shuffle]: Randomly plays all tracks in
the folder repeatedly.
PLAY MODE
Play All
Repeat One
Repeat All
Shuffle
Move
Exit
<TEXT VIEWER mode>
The browsing menu will be displayed to select a desired file.
When the camera is turned on / off or camera mode is
changed, this camera will memorize the latest stopped frame.
MP3 mode: plays back from the beginning of the file.
PMP mode: plays back from the lastest stopped frame.
TEXT VIEWER mode: plays back from the last stopped frame.
Skin of MP3 player
You can set the skin of MP3 player.
[Default 1, 2]: Default skin will be set.
[User Skin 1, 2]: An image created by the
[MP3 Skin] menu (p.64)
will be set.
MP3 SKIN
Default 1
Default 2
User Skin 1
User Skin 2
Move
102
Exit
Exit
Setting up the playback function using the LCD monitor
Playing back the slide show
Delete all
While the MP3 file is playing back, captured images are displayed on
the LCD monitor continuously.
All files stored on the memory card will be deleted. In the MP3 mode,
only MP3 files are deleted. In the PMP mode, only multimedia files are
deleted. In the TEXT VIEWER mode, TEXT files are deleted.
[Play]: Display the images once.
[Repeat Play]: Display the images
continuously.
When the playing back is complete, the
slide show will stop.
To stop the slide show, press the E button.
SLIDE SHOW
SHOW PLAY
Play
SHOW INTERVAL ▶ Repeat Play
Move
Exit
DELETE ALL
DELETE ALL
DELETE ALL
No
No
No
Yes
Yes
Yes
Move
Exit
<MP3 mode>
[No]:
[Yes]:
Setting slide show interval
You can set the slide show play interval of MP3 mode.
– Select an interval from 2, 3 or 5
seconds.
Move
Exit
Move
<PMP mode>
Cancels “Delete files”
A confirmation window will
display. Select [Yes] and press
the OK button. All files will be
deleted.
DELETE ALL
No
No
Yes
Move
Exit
▶
SHOW INTERVAL
2 sec
Frame search
3 sec
5 sec
Move
Delete All?
Yes
SLIDE SHOW
SHOW PLAY
Exit
<TEXT VIEWER mode>
Exit
You can set the time of skip range when
you search the movie by pressing the
Left/Right button. You can search a frame
you want easily.
[Normal, 30 sec, 1, 3, 5, 10 min]:
This will skip a set frame whenever you
press the Left/Right button.
SEEKING
Normal
30 sec
1 min
3 min
5 min
10 min
Move
Exit
103
Setting up the playback function using the LCD monitor
Display setting
Setting up the recording function in the MP3 mode
You can set the play back function display on the LCD.
You can take a picture and listen to the
MP3 files at the same time.
[5 sec]: If there is no operation during
PLAYER DISPLAY
5 seconds, Menu bar will
5sec
disappear.
On
Off
[On]:
Menu bar will appear on the
LCD monitor.
[Off]:
Menu bar will not appear on
Exit
Move
the LCD monitor.
To see the caption, insert the caption file (.smi) by using the Samsung
Converter. (p.126)
If a multimedia file has a caption, the caption will appear regardless of
display setting.
Information of DRM file
The information of the MP3 file with DRM
displays.
DRM License Information
Service Started On: 2008/01/01
Service Expired On: 2009/01/01
License information is missing or expired.
Move
Exit
<MP3 mode>
Only ‘Netsync DRM’ files downloaded from SMS(Samsung media studio)
Korean online shop can be played back.
104
00016
1. Press the Shutter button and the MP3
stand-by icon will appear.
2. Press the Shutter button and an image
will be captured.
E
MP3
The camera settings are fixed to default setting of Auto mode
( , , , ). The settings can’t be changed.
If the memory card is not inserted, this function will not operate.
Occasionally the next file will be played back when you press
the Shutter button, even though a memory card is inserted.
To cancel the recording mode of the MP3 mode, press the
E button or do not operate any buttons for about 10 seconds.
The equalizer setting is fixed to <Normal>.
The MP3 sound may be a little louder in this mode.
Auto Scroll
The playing text is scrolled automatically and displays on the LCD
monitor.
[Off]: The text will not be scrolled automatically.
Press the Up/Down button and you can
use the Auto Scroll function.
[0.8, 1.1, 1.4, 1.7, 2.0, 2.3 sec]:
The text will be scrolled automatically.
The interval is marked on each menu icon.
AUTO SCROLL
Off
0.8 sec
1.1 sec
1.4 sec
1.7 sec
2.0 sec
MOVE
EXIT
Setting up the playback function
using the LCD monitor
MP3 BGM Setting
You can play MP3 files when you are
playing the text.
You cannot play the MP3 files.
When you are playing the text,
you can play the MP3 files.
The last played MP3 files will be executed.
You can get around the world useful travel information. The travel
information supports Korean, English, Chinese, German, French
and Russian and the language can vary depending on sales region.
You can download the tour guide information from Samsung Camera
website.
MP3 BGM
Off
[Off]:
[On]:
World tour guide
Download the tour guide information
On
Move
Exit
Language setting
You can setup the language of OS (Operating System) in which the
text file was made.
– If the characters of the text file aren’t
displayed correctly, open the file on
LANGUAGE
ENGLISH
Windows 2000 or later and save it
한국어
again. We recommend using ‘Notepad’
FRANÇAIS
DEUTSCH
and it has to be saved as ANSI
ESPAÑOL
encoding type.
ITALIANO
Move
Exit
– Some unique characters may not be
displayed correctly on the camera.
– Encode the text files as the standard type or some characters may not
be displayed correctly.
In order for you to use the World Tour Guide function, the tour
information file should be stored on the memory. If there is a tour
information file that you want, visit our website and download the
desired file.
1. Visit http://www.samsungcamera.com then select the tour guide
information you want.
2. Download the file to the computer and extract the file.
3. Connect and turn on the camera and computer.
4. Run the Window Explorer. Find the Removeable disk.
5. Make [TOUR] folder on the Removeable disk.
6. Select a file you want and copy it to the removeable disk.
105
World tour guide
World Tour Guide mode
Select the World Tour Guide mode
SHOOTING
MULTIMEDIA
Travel Guide
This mode provides tour information for
famous tourist destinations around the
SCENE
Fn Back
Fn
OK Select
Select the desired tour site by
pressing the Up/Down/Left/Right
button and press the OK button.
Starting the world tour guide
Back
E
Info
Select the tour place by pressing
the Left/Right/Up/Down button.
You can find the detail information and pictures.
Move
Check the images
by pressing the
T button.
OK Select
Select the location by
pressing the Up/Down/
Left/Right button and
press the OK button.
Fn
Back
T
Image
Check other tour
places by pressing
Left/Right button.
Fn Back
OK Select
Select the country by
pressing the Up/Down/
Left/Right button and
press the OK button.
106
Fn Back
OK Select
Select the state by
pressing the Up/Down/
Left/Right button and
press the OK button.
Fn
Back
T
Image
Check the
information of the
site by pressing
the W button.
W
Text
OK Select
Select the picture by pressing the
Up/Down button and press the OK
button. You can see the picture of
the desired tour site on the screen.
World tour guide
You can select desired function.
3 Select [Yes] to add bookmark. You can
confirm the added bookmark in the
Bookmark list.
Bookmark
World time
Bookmark list
Information
Language
BOOKMARK
Do you want to
bookmark this region?
No
Sound
Yes
Move
Exit
Move
Bookmark list
MENU
[Bookmark list]: Select the [Bookmark
list] on the menu bar and the bookmark
list will appear.
– Press the MENU button to display
the tour guide information.
– Press the Fn button to delete the
selected area in the bookmark list.
Select
Language
Adding the [Bookmark]
[Language]: Select the [Language] on
the menu bar and the language list will
appear.
1 Select desired area and press E button
to display a menu bar.
BOOKMARK LIST
USA/California / Los Angeles
Japan / Kyoto / Nago Pineapple Park
Japan / Okinawa
Korea / Jejudo / Jeju Bunjae Artpia Muse
Korea / Seoul
USA / Alaska / Anchorage
Fn Delete
MENU
Select
한국어
ENGLISH
䳻⃎ᾨ㜂
FRANÇAIS
DEUTSCH
РУССКИЙ
MENU
Select
Select
2 Select the [Bookmark].
SOUND
SOUND
Off
Music1
Music2
Music3
My MP3
[SOUND]: Select the [SOUND] on the
menu bar and the sound list will appear.
Bookmark
Move
Move
이동
MENU
LANGUAGE
Move
Move
Confirm
OK
MENU 선택
Select
MENU
Select
107
World tour guide
Saving the information of some sites may take long time. Save
each information of sites in order.
If the downloaded files are changed by any non-official
methods, the files don’t playback on the camera.
Formating the camera deletes all data on the memory (including
protected images, Movies, Multi media files and Tour
Information). Copy the files to a computer before formating the
memory.
If there is no related site information file on the memory, the
site menu can be displayed but can’t be selected.
Important notes
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not
use or store this unit in the following locations.
– Areas exposed to severe changes in temperature and humidity.
– Areas exposed to dust and dirt.
– Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
– Environments where there is high magnetism or excessive vibration.
– Areas with high explosives or highly flammable materials.
Do not leave this camera in places subject to dust, chemicals
(like naphthalene and mothballs), high temperature and high
humidity. Keep this camera with silica gel in a hermetically
sealed box when not planning to use the camera for a long
period of time
Sand can be particularly troublesome to cameras.
– Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
– Doing so may result in failure or may permanently render the camera
unusable.
Handling the camera
– Never drop the camera or subject it to severe shocks or vibrations.
– Protect the large size LCD monitor from an impact. When this camera
is not used, keep it in the camera case.
– Avoid obstructing the lens or the flash when you capture an image.
108
Important notes
– This camera is not waterproof. To avoid dangerous electrical shocks,
never hold or operate the camera with wet hands.
– If you use this camera in wet places, such as beach or pool, do not let
water or sand get inside the camera. Doing so may result in failure or
may permanently damage the unit.
Extremes in temperature may cause problems.
– If the camera is transferred from a cold to a warm and humid
environment, condensation can form on the delicate electronic circuitry.
If this occurs, turn the camera off and wait for at least 1 hour until all
moisture is dispersed. Moisture built up can also occur on the memory
card. If this happens, turn off the camera and remove the memory
card. Wait until the moisture has dispersed before replacing the card
in the camera.
Caution on Using the Lens
– If the lens is subjected to direct sunlight, it could result in the
discoloration and deterioration of the image sensor.
– Take care not to get fingerprints or foreign substances on the surface of
the lens.
If the digital camera is not used for a long period, an electric
discharge can occur. It is a good idea to remove the battery
and the memory card if you do not intend using the camera for
an extended period of time.
If the camera is exposed to electronic interference, it will turn
itself off to protect the memory card.
Camera Maintenance
– Use a soft brush (available from photo stores) to gently clean the lens and
LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning
fluid can be used. Clean the camera body with a soft cloth. Do not allow
this camera to come into contact with solvent materials such as benzol,
insecticide, thinners etc. This may damage the body shell of the camera and
also affect its performance. Rough handling can damage the LCD monitor.
Take care to avoid damage and keep the camera in its protective carry case
at all times when not in use.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash
unit to fire. This is not harmful to the camera and is not a
malfunction.
When images are uploaded or downloaded, the data transfer
may be affected by static electricity. In this case, disconnect
and re-connect the USB cable before trying the transfer again.
Before an important event or going on a trip, you should check
the camera condition.
– Take a picture for testing the camera condition and prepare an extra battery.
– Samsung cannot be held responsible for camera malfunctions.
Do not use headphones/earphones while driving, cycling, or
operating any motorized vehicle. It may create a traffic hazard
and can be illegal in some areas.
Avoid using headphones/earphones at high volume. Hearing
experts advise against continuously loud and extended play.
If you experience a ringing in your ears, reduce volume or
discontinue use.
109
Warning indicator
There are several warnings that may appear on the LCD display.
[ Card Error ! ]
• Memory card error.
Turn off the camera power and turn it on again.
Insert the memory card again.
Insert and format the memory card. (p.88)
[ Card Locked! ]
• The memory card is locked.
SD/SDHC memory card: Slide the write protect switch to the top of
the memory card.
[ No Card! ]
• A memory card is not inserted.
Insert the memory card.
Turn off the camera power and turn it on again.
[ No Image! ]
• There are no images stored on the memory.
Take images.
Insert a memory card that is holding some images.
110
[ File Error! ]
• File error.
Delete the file.
• Memory card error.
Contact a camera service centre.
[ Low Battery! ]
• There is low battery capacity.
Insert fresh batteries.
[ Low Light! ]
• When taking pictures in dark places.
Take pictures in Flash Photography mode.
[Out of Number]
• When selecting too many printing pages in the PictBridge menu.
Select printing page within the limitation.
[DCF Full Error]
• Violation of DCF format.
Copy the images to a PC and format the memory.
Before contacting a service centre
Please check the following.
The camera doesn’t switch on.
• There is low battery capacity.
Insert fresh batteries. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -).
The camera power ceases while in use.
• The battery is exhausted.
Insert fresh batteries.
• The Camera is turned off automatically.
Turn on the camera power again.
Battery power quickly drains.
• The Camera is being used in low temperatures.
Keep the camera in warm conditions (i.e. inside a coat or jacket) and
only remove it in order to take images.
Camera does not take images when pressing the Shutter button.
• There is insufficient memory capacity.
Delete unnecessary image files.
• The memory card has not been formatted.
Format the memory card (p.88).
• The memory card is exhausted.
Insert a new memory card.
• The memory card is locked.
Refer to [Card Locked!] error message.
• The camera’s power is off.
Turn the camera power on.
• The battery is exhausted.
Insert fresh batteries. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -).
The camera suddenly stops working while in use.
• The camera stopped due to a malfunction.
Remove /re-insert battery and switch the camera on.
The camera buttons do not operate.
• Camera malfunction.
Remove/re-insert battery and switch the camera on.
111
Before contacting a service centre
The images are unclear.
• A picture was taken of a subject without setting an appropriate macro mode.
Select an appropriate macro mode to take a clear image.
• Taking a picture beyond the flash range.
Take a picture within the flash range.
• The lens is smudged or dirty.
Clean the lens.
Colour of image is different to the original scene.
• White balance or effect setting is incorrect.
Select appropriate White balance and effect.
Images are too bright.
• Exposure is excessive.
Reset exposure compensation.
The flash does not fire.
• Flash off mode has been selected.
Dis-engage flash off mode.
• The camera mode can’t use the flash.
Refer to the FLASH instruction. (p.32-34)
Incorrect date and time is displayed
• The date and time have been set incorrectly or the camera has adopted
the default settings.
Reset the date and time correctly.
A card error has occurred while the memory card is in the camera.
• Incorrect memory card format.
Re-format the memory card.
The images don’t play back.
• Incorrect file name. (Violation of DCF format)
Do not change the image file name.
112
No image on external monitor.
• The external monitor has not been connected properly with the camera.
Check the connection cables.
• There are incorrect files in the memory card.
Insert a memory card that has correct files.
When using the PC’s explorer, the [Removable Disk] file does not show.
• Cable connection is incorrect.
Check the connection.
• The camera is off.
Turn the camera on.
• The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac
OS 10.1 ~ 10.4. Alternatively the PC does not support USB.
Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 - 10.4 to
PC that supports USB.
• The camera driver is not installed.
Install a [USB Storage Driver].
Specifications
Image Sensor
– Type: 1/2.5” CCD
– Effective Pixel: Approx. 8.2 Mega-pixel
– Total Pixel: Approx. 8.3 Mega-pixel
Lens
– Focal Length: Samsung Lens f = 6.3 ~ 18.9mm
(35mm film equivalent: 38 ~ 114mm)
– F No.: F3.5(W) ~ F4.5(T)
– Digital Zoom:
Still Image mode: 1.0X ~ 5.0X
Play mode: 1.0X ~ 10.2X (depends on image size)
LCD Monitor
– 2.7” colour TFT LCD (230,000 pixel)
Focusing
– Type: TTL auto focus, Multi AF, Center AF, Face
Detection AF
– Range
Normal
Wide
Tele
80cm ~ Infinity
Macro
Super Macro
Auto Macro
5cm ~ 80cm
1cm ~ 5cm
5cm ~ Infinity
40cm ~ 80cm
-
40cm ~ Infinity
Shutter
– Speed 1 ~ 1/2,000 sec. (Night: 16 ~ 1/2,000 sec.)
Exposure
–
–
–
–
Control: Program AE
Metering: Multi, Spot, Center Weighted, Face Detection
Compensation: ±2EV (1/3EV steps)
ISO: Auto, 80, 100, 200, 400, 800, 1600, 3200(3M)
Flash
– Modes: Auto, Auto & Red-eye reduction, Fill-in flash,
Slow sync, Flash off, Red-eye Fix
– Range: Wide: 3.3m, Tele: 2.4m (ISO Auto)
– Recharging Time: Approx. under 4 seconds (new battery)
Sharpness
– Soft+, Soft, Normal, Vivid, Vivid+
White Balance
– Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
Voice Recording
– Voice Recording (max 10 hours)
– Voice Memo in Still Image (max. 10 sec.)
Date Imprinting
– Date, Date & Time, Off (user selectable)
Shooting
– Still Image
• Modes: Auto, Program, DIS, Fun, Photo Heip Guide,
Movie, Multimedia (MP3,PMP,TextViewer)
Scene: Night, Portrait, Children, Landscape, Text,
Close-up, Sunset, Dawn, Backlight, Fireworks,
Beach & Snow, Cafe, Food, Self Shot (Total
14 modes)
• Shooting: Single, Continuous, AEB(0.3 step unto
3cut), Motion Capture
• Self-timer: 2 sec., 10 sec., Double(10 sec, 2 sec),
Motion Timer
113
Specifications
– Movie Clip
• With Audio or without Audio (user selectable,
recording time : memory capacity dependent, max
2hours)
• Size: 800x592, 640x480, 320x240
• Optical Zoom with sound recording
• Frame rate: 30 fps, 20 fps, 15 fps (20 fps for
800x592)
• Optical Zoom up to 3.0X
• Movie Editing (Embedded): Pause during recording,
Still Image Capture Time Trimming
Storage
114
– Image Size and Capacity (256 MB Size)
Super Fine
Fine
Normal
3264x2448 3264x2176 3264x1836 2592x1944 2048x1536 1024x768
53
60
71
86
134
434
94
107
133
161
226
520
135
171
202
220
306
600
These figures are measured under Samsung standard conditions and
may vary depending on shooting conditions and camera settings.
Special “E” Button
– Recording Effect:
Photo Style Selector: Normal, Vivid, Soft, Forest, Retro,
Cool, Calm, Classic
Color Effect: Normal, B&W, Sepia, Red, Blue, Green,
Negative, Custom Color
Image Adjust: Saturation, Contrast, Sharpness
Fun: Cartoon, Photo Frame, High Light, Composite,
Color Mask
– Playback Effect:
Image Edit: Resize, Rotate
Color: Normal, B&W, Sepia, Red, Blue, Green, Negative,
Custom Color
Image Adjust: ACB, Red Eye Fix, Brightness, Contrast,
Saturation, Add Noise
Fun: Cartoon, Photo Frame, High Light, Composite,
Sticker, Color Filter, Color Mask
Image Play
– Single image, Thumbnails, Slide show
– Media
• Internal memory: 256MB (User Memory: 190MB)
• External Memory (Optional)
MMC Plus (Up to 2GB, guaranteed)
SD/SDHC Card (up to 4GB guaranteed)
* Internal memory capacity is subject to change
without prior notice.
– File Format
• Still Image: JPEG (DCF), EXIF 2.2, DPOF 1.1,
PictBridge 1.0
• Movie Clip: AVI (MPEG-4)
• Audio: WAV
Specifications
Multi function
– MP3, PMP, World Tour Guide, Text Viewer, Portable
Memory, Voice Recorder
Interface
–
–
–
–
Digital output connector: USB 2.0 High Speed
Audio: Mono
Video output: NTSC, PAL (user selectable)
DC Adapter: 4.2V, 20 pin connector
Power Source
– Rechargeable battery: SLB-0937, 3.7V (900mAh)
– Adaptor: SAC-47(DC 4.2V, 400mA)
Included battery may vary depending on sales region.
Dimensions
(WxHxD)
– 90.7 X 58 X 19.9mm (excluding protrusions)
Weight
– 116g (without batteries and card)
Operating
Temperature
– 0 ~ 40°C
Operating Humidity
– 5 ~ 85%
Software
– Application: Samsung Master, Samsung Converter,
Adobe Reader
File
– File Format: MP3 (MPEG-1/2/2.5 Layer 3)
– Bit Rate: 48 ~ 320kbps (Including VBR)
Sound Effect
– SRS, Normal, Classic, Dance, Jazz, Live, Rock
Play Mode
–
–
–
–
–
PMP Specification
PMP Decoder
– Movie: Modified Xvid MPEG4 (Other video files
have to use Samsung Converter S/W)
– Audio: MPEG Layer 2 (Samsung Convert S/W)
Play Mode
– Fast Forward/Rewind(Max 32x)
– Seeking in Play, Skipping in Play
(Normal, 30sec, 1min, 3min, 5min, 10min)
– Auto skipping after one file played
– Auto reload function (Remember last played frame)
– Support Full Screen in Converting S/W
Subtitle
– Support SMI file (Using Samsung Converter S/W)
MP3 Specification
Audio
–
–
–
–
Frequency: 20Hz ~ 20KHz
Earphone Port: 20Pin Port (Stereo Type)
Output: Maximum Volume Left 40mW + Right 40mW (16Ω)
Noise Ratio: 88 dB with 20 KHz LPF
All, Repeat One, Repeat All, Random, Random Repeat
Skipping in Play, Auto Skipping
Slide Show On/Off (User Selectable)
MP3&Capturing (Capturing Mode is Auto Default, 3M)
Auto reload function (Remember both the last played
file and frame)
– Background skin of MP3 playback using user images
115
Specifications
Please ensure that you read the instruction manual carefully before
use.
Text Specification
File
– TXT extension name, up to 99999 pages
File format
– Window: ANSI (Windows 98 or later), Unicode /
Unicode (Big-Endian) / UTF-8 (Windows 2000/XP)
– Mac: ANSI, Unicode (UTF-16)
Function
–
–
–
–
Language
– English, Korean, French, German, Spanish, Italian,
Chinese, Taiwanese, Japanese, Russian, Portuguese,
Dutch, Danish, Swedish, Finnish, Bahasa, Polish,
Hungarian, Czech, Turkish.
* Supportable language is subject to change without prior
notice.
Auto Scroll (0.8 sec ~ 2.3 sec)
Skipping by 1 page / 10 pages
Auto reload function (Remember last page)
Support MP3 BGM during displaying text file
Specifications are subject to change without prior notice.
All trademarks are the property of their respective owners.
116
Software notes
– The attached software is a camera driver and image editing software
tool for Windows.
– Under no circumstances should all or part of either the software or the
user manual be reproduced.
– Copyrights for software are licensed only for use with a camera.
– In the unlikely event of a manufacturing fault, we will repair or exchange
your camera. We cannot, however, be held responsible in any way for
damage caused by inappropriate use.
– Using a Hand-made PC or a PC and OS that has not been guaranteed
by the manufacturer is not covered by the Samsung warranty.
– Before reading this manual, you should have a basic knowledge of
computers and O/S (Operating Systems).
System requirements
About the software
After inserting the CD-ROM provided with this camera into the
CD-ROM drive, the following window should automatically display.
For Windows
PC with processor better than
Pentium 450MHz
(Pentium 800MHz recommended)
* Samsung Converter
PC with processor better than
Pentium 500MHz (Pentium IV
recommended)
For Macintosh
Power Mac G3 or later, or Intel
Processor
Camera driver: This enables images to transfer between the
camera and PC.
Windows 98SE / 2000 / ME /
XP/Vista
* Samsung Converter
Windows 2000 or later
recommended
Mac OS 10.1 ~ 10.4
Minimum 128MB RAM
(Over 512MB recommended)
Minimum 256MB RAM
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
1024×768 pixels, 16-bit colour
display compatible monitor
(24-bit colour display
recommended)
Microsoft DirectX 9.0 or later
Before connecting the camera to the PC, you
should first install the camera driver.
MPlayer (For movie clip)
This camera uses the USB Storage Driver as the camera driver. You
can use the camera as a USB card reader. After installing the driver
and connecting this camera to the PC, you can find [Removable Disk]
in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the
Application CD. You can use the camera with Mac OS 10.1~10.4.
XviD codec: This makes movie clips (MPEG-4) recorded with
this camera play back on a PC.
To play back a movie clip recorded with this camera, you must install the
XviD codec. If a movie clip recorded with this camera does not play well,
install this codec. This software is only compatible with Windows.
117
About the software
Setting up the application software
Samsung Converter: Multimedia converting program
To use this camera with a PC, install the application software first.
Multimedia (Movie, Video clip, etc) files can be converted into movie clips
that can be played back on this camera. This software is only compatible
with Windows.
After this has been done, the stored images in the camera can be
moved to the PC and can be edited by an image editing program.
Samsung Master: This is the all-in-one multi media software
solution.
You can download, view, edit and save your digital images and movie clips
with this software. This software is only compatible with Windows.
Be sure to check the system requirements before installing the
driver.
You should allow 5 ~ 10 seconds for running the automatic
setup program according to the capability of your computer.
If the frame does not appear, run the [Windows Explorer] and
select [Installer.exe] in the CD-ROM Drive root directory.
You can visit the Saung web-site through the internet.
http://www.samsungcamera.com: English
http://www.samsungcamera.co.kr: Korean
1. The auto run frame will display.
Click the [Samsung Digital
Camera Installer] menu in the
Auto run frame.
2. Install the camera driver, DirectX, XviD, Samsung Converter, Samsung
Master and Adobe Reader by selecting a button shown on the monitor.
If a latest version of DirectX was installed on your computer, DirectX
may not be installed.
118
Setting up the application software
3. To play back the movie clip recorded with this camera on the computer,
install the XviD codec.
The XviD codec is distributed according to the GNU General Public
License and everyone can copy, distribute and change this codec. This
License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms
of this General Public License. For more information, see the License
documents (http://www.gnu.org/copyleft/gpl.html).
119
Setting up the application software
4. Install the software by following instructions on the monitor.
120
Setting up the application software
5. After restarting the computer, connect the PC to the camera with the
USB cable.
6. Turn the camera power on. The [Found
New Hardware Wizard] will open and the
computer will recognise the camera.
If your OS is Windows XP/ Vista, an
image viewer program will open. If
the download window of Samsung
Master opens after starting Samsung
Master, the camera driver was set up
successfully.
If you have installed the camera driver, the [Found New
Hardware Wizard] may not open.
On a Windows 98SE system, the Found New Hardware
Wizard dialog box opens and a window asking you to select a
driver file may appear. In this case, specify “USB Driver” in the
CD supplied.
PDF documents of the user manual are included in the
Software CD-ROM supplied with this camera. Search the
PDF files with Windows explorer. Before opening the PDF files,
you must install the Adobe Reader included in the Software
CD-ROM.
To install the Adobe Reader 6.0.1 correctly, Internet Explorer
5.01 or later has to be installed. Visit “www.microsoft.com” and
upgrade the Internet Explorer.
121
Starting PC mode
If you connect the USB cable to a USB port on your PC and then
turn on the power, the camera will automatically switch to “computer
connection mode”. In this mode, you can download stored images to
your PC through the USB cable.
Connecting the camera to a PC
Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with
the supplied USB cable.
3. Turn on the computer. The camera and
computer are connected.
4. External device selection menu will
display on the LCD monitor.
5. Select the [Computer] by pressing the
Up/Down button and press the OK button.
Select USB
Computer
Printer
OK Confirm
If you selected [Printer] in Step 5, when you connect the camera to your
computer, the [Connecting Printer] message will be displayed and the
connection will not be established. In this case, disconnect the USB cable,
and then follow the procedure from Step 2 and onward.
Disconnecting the camera and PC
Refer to page 124-125 (Removing the removable disk).
122
Starting PC mode
Downloading stored images
You can download the still images stored on the camera to your PC’s
hard disk and print them or use a photo editing software to edit them.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
– [Cut]: cuts a selected file.
– [Copy]: copies files.
1. Connect the camera to your PC with the
USB cable.
2. On your computer’s desktop display,
select [My computer] and double click
[Removable Disk DCIM 100SSCAM].
The image files will then be displayed.
5. Click a folder where you want to paste the file.
6. Press the right mouse button and a
pop-up menu will open. Click [Paste].
3. Select an image and press the right
mouse button.
7. An image file is transferred from the
camera to your PC.
123
Starting PC mode
– By using [Samsung Master], you can see the stored images in the
memory directly on the PC monitor and you can copy or move the
image files.
We recommend that you should copy the images to the PC to
view them. Opening images directly from the removable disk
may be subject to unexpected disconnection.
When you upload a file that is not taken by this camera to the
Removable Disk, the [File Error!] message will be displayed on
the LCD monitor in the Play mode, and nothing is displayed in
THUMBNAIL mode.
Removing the removable disk
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the camera
status lamp blinks, please wait until the lamp has finished blinking and
is constantly on.
2. Unplug the USB cable.
Windows 2000/ME/XP/Vista
(The illustrations may differ from those shown depending on the Windows
O/S.)
1. Check whether the camera and PC are transferring a file. If the camera
status lamp blinks, please wait until the lamp has finished blinking and
is constantly on.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
Double-click!
3. The [Unplug or Eject Hardware] window
will open. Select the [USB Mass Storage
Device] and click the [Stop] button.
4. The [Stop a Hardware device] window
will open. Select the [USB Mass Storage
Device] and click the [OK] button.
124
Removing the removable disk
5. A [Safe to Remove Hardware] window
will open. Click the [OK] button.
6. An [Unplug or Eject Hardware] window
will open. Click the [Close] button and
the removable disk will be removed
safely.
7. Unplug the USB cable.
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up. This camera is compatible
with MAC OS 10.1 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the
camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory
will be displayed.
2. Select an image file and copy or move it to MAC.
For Mac OS 10.1 or later: First complete uploading from
computer to camera and then remove the removable disk with
the Extract command.
125
Removing the USB Driver for
Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them both on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add/Remove Programs
Properties.
6. Uninstallation is complete.
126
Samsung Converter
Multimedia (Movie, Video clip, etc) files can be converted into movie
clips that can be played back on this camera. This software is only
compatible with Windows.
How to use the Samsung Converter
1. Double click the Samsung Converter icon on
the desktop.
2. Click the Add icon and select a file that you
want to add.
3. If you want to add a caption, check [Use
subtitles from file (*.smi)].
4. Select settings that you want and click the
[Convert] button.
– [Output format]: You can set the output format.
– [Frame size]: You can set the width and height of output movie clip.
– [Frame rate]: You can set fps (Frame Per Second).
– [Screen size]: You can set type of display.
– [Split by size]: You can set the file size of output movie clip.
5. Connect the camera to the computer with the supplied USB cable.
6. Copy the converted movie clip in the
destination folder and paste the file in the [PMP]
folder.
Samsung Converter
7. You can play back the converted movie
clip in the Play mode of the camera.
Refer to the [Help] menu in Samsung
Converter for further information.
Who bent my camera?
Before converting a multimedia file, check whether it plays
back correctly on the Windows Media Player.
The converted files are saved as *.sdc file type that can be
played back on the Windows Media Player.
The Samsung Converter doesn’t cover every kind of codec.
If a multimedia file can’t play back on the Windows Media
Player, install a multicodec (We recommend Full version of
latest K-Lite Codec). Install the Samsung Converter again after
installing the multi-codec.
You can select a destination folder for each converted file.
When the folder is not selected, the converted files are saved
on a folder where the source file is.
If you convert several files at the same time, the computer may
be running slow because of the CPU capacity. In this case,
add the files in the program one by one.
Computer specification, installed code and programs are the
main causes of converting error. When a converting error
happens, please check the following.
– Any codecs compatible with the files were not installed or
installed incorrectly. In this case, find a compatible codec
and install it. If you do not find any compatible codecs,
install a multi-codec.
– If you installed various multi-codecs on your computer, it
may cause converting problems. In this case, remove all
codecs and install a proper multi-codec.
– Install a latest Windows Media Player.
– Visit device (PC, Graphic card, Sound card) manufacturer
web-site and upgrade them with the latest version.
Some kinds of multimedia files are not converted. If the
converted media files are damaged, they may not play back on
the camera. Unusual type of files may not be converted. The
sound and scenes may not synchronise.
The expected file sizes after converting a media file may vary.
It depends on the computer system you use.
If there is no font that is compatible with the script file on your
‘.
PC, the script is shown as ‘
Transferring the converted file to a removable disk is time
consuming. It may take a long time. The duration depends on
the file size.
Do not use the PMP mode while driving. It may create a traffic
hazard.
A file that does not support fast search on the Windows Media
Player can’t select converting range and divide file size.
127
Samsung Master
You can download, view, edit and save your images and movies with
this software. This software is only compatible with Windows.
To run the Samsung Master, double click the Samsung Master icon on
the desktop.
Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display
after connecting the camera to your PC.
– To download the captured images, select
the [Select All] button.
– Select desired folder in the window and
click the [Select All] button. You can save
captured images and selected folder.
– If you click the [Cancel] button,
downloading will be cancelled.
3. Click [Next >] button.
128
4. Select a destination and make a new folder
in which to save downloaded images and
folders.
– Folder names can be made in order of
date and images will be downloaded.
– Folder name will be made as you want
and images will be downloaded.
– After selecting a folder that was made
before, images will be downloaded.
5. Click [Next >] button.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
7. Downloaded images will be displayed.
Samsung Master
Image viewer: You can view the stored images.
– Image viewer functions are listed below.
① Menu bar: You can select menus. File, Edit, View, Tools, Change
functions, Auto download, help, etc.
② Image selection window: You can select the desired images in this
window.
③ Media type selection menu: You can select image viewer, image edit and
movie edit functions in this menu.
④ Preview window: You can preview an image or a movie clip and check
the multi media information.
⑤ Zoom bar: You can change preview size.
⑥ Folder display window: You can see the folder location of the selected
image.
⑦ Image display window: Images of the selected folder are displayed.
Refer to the [Help] menu in Samsung Master for further information.
Image edit: You can edit the still image.
– Image edit functions are listed below.
① Edit menu: You can select the following menus.
[Tools]: You can resize or crop the selected image. See the [Help]
menu.
[Adjust]: You can modify image quality. See the [Help] menu.
[Retouch]: You can change image or insert effects on the image. See
the [Help] menu.
② Drawing tools: Tools for editing an image.
③ Image display window: A selected image is displayed in this window.
④ Preview window: You can preview the changed image.
A still image edited with Samsung Master can’t be played back on the
camera.
Refer to the [Help] menu in Samsung Master for further information.
129
Samsung Master
Movie edit: You can get the still image, movie clip, narration,
music files together in a movie clip.
– Movie clip edit functions are listed below.
① Edit menu:You can select the following menus.
[Add Media]: You can add other media elements to a movie.
[Edit Clip]: You can change the brightness, contrast, colour and
saturation.
[Effects]: You can insert an effect.
[Set Text]: You can insert texts.
[Narrate]: You can insert a narration.
[Produce]: You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv) and Windows
media (asf) file types.
130
② Frame display window: You can insert multi media in this window.
Some movie clips that were compressed with a codec that is not
compatible with the Samsung Master can’t play back in the Samsung
Master.
Refer to the [Help] menu in Samsung Master for further information.
FAQ
Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
Install the camera driver correctly. Turn off the camera, remove the USB
cable, plug in the USB cable again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
Turn the camera power off and on again. Transfer the file again.
Case 4
When using the USB hub.
There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
Case 5
Case 6
When I open the Device Manager (by clicking Start (Settings) Control
Panel (Performance and Maintenance) System
(Hardware)
Device Manager), there are Unknown Devices or Other Devices entries
with a yellow question mark(?) beside them or devices with an exclamation
mark(!) beside them.
Right-click on the entry with the question (?) or exclamation (!) mark
and select “Remove”. Restart the PC and connect the camera again.
For Windows 98SE PC, remove the camera driver also, restart the
PC, and then reinstall the camera driver.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the computer may
not recognise the camera as a removable disk.
Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
Case 8
The camera is connected to the USB port located on the front of the
computer.
When the camera is connected to the USB port located on the
front of the computer, the computer may not recognise the camera.
Connect the camera to the USB port located on the back of the
computer.
Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
131
FAQ
When the movie clip doesn’t play back on the PC
When the movie clip recorded by the camera doesn’t play back on the
PC, the causes are mostly due to the codec installed on the PC.
When codec for play back the movie clip isn’t installed
Install the codec as listed below.
[Installing codec for Windows]
Installing the XviD codec
1) Insert the CD provided with the camera.
2) Run the windows explorer and select [CD-ROM drive:\XviD] folder
and click the XviD-1.1.2-01112006.exe file.
The XviD codec is distributed according to the GNU General Public
License and everyone can copy, distribute and change this codec.
This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. For more information,
see the License documents (http://www.gnu.org/copyleft/gpl.html).
[Installing codec for Mac OS]
1) Visit the following site for downloading the codec. (http://www.divx.
com/divx/mac)
2) Click the [Free Download] menu on the top right side of the window
then download windows appears.
3) Check the version of Mac OS and click the [Download] button to
download the file and save it to a desired folder.
4) Run the downloaded file and the codec for playing back the movie
clip will be installed.
If the movie file is not played back on the Macintosh OS, use a
media player that supports Xvid codec (e.g: Mplayer).
When the DirectX 9.0 or later is not installed
Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file. The
DirectX will be installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx
If a PC (Windows 98SE) stops responding while the
camera and PC are connected repeatedly
If a PC (Windows 98SE) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera.
In this case, re-start the PC.
132
FAQ
If a PC connected with the camera stops responding
while Windows is starting.
In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to
disable and re-start the PC. The Legacy USB Support is in the BIOS
setup menu. (The BIOS setup menu differs from the PC manufacturers
and some BIOS menus don’t have Legacy USB Support) If you can’t
change the menu by yourself, contact to the PC manufacturer or BIOS
manufacturer.
If the movie clip can’t be deleted, or the removable disk
can’t be extracted or an error message displays during the
file transfer.
If you install only the Samsung Master, the problems mentioned above
occasionally happen.
– Close the Samsung Master program by clicking the [Samsung
Master] icon on the Taskbar.
–Install all the application programs included in the software CD.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical
& Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should
not be disposed of with other household wastes at the end
of its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial
wastes for disposal.
Samsung Techwin cares for the environment at
all product manufacturing stages to preserve the
environment, and is taking a number of steps to
provide customers with more environment-friendly
products. The Eco mark represents Samsung
Techwin’s will to create environment-friendly
products, and indicates that the product satisfies the
EU RoHS Directive.
133
FCC notice
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the distance between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio / TV technician for help.
CAUTION:
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
134
Declaration of Conformity
Trade Name: SAMSUNG TECHWIN
Model No.: Samsung i8
Responsible Party: Samsung Opto-Electronics America, INC.
Address: 40 Seaview Dr. Secaucus, NJ 07094
Telephone No.: 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Download PDF

advertising