Samsung | SAMSUNG I85 | Samsung i85 User Manual

Instructions
Getting to know your camera
Use this camera in the following order.
Thank you for buying a Samsung Digital Camera.
Set up the camera driver
Take a picture
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.114~116)



Take a picture. (p.21)

Insert the USB cable
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.117)
Check the camera’s power
Check the camera’s power. If the
power is turned off, press the camera
button to turn it on.
Check [Removable Disk]
Open Windows EXPLORER and
search for [Removable Disk]. (p.118)



Microsoft, Windows and Windows logo are registered trademarks of
Microsoft Corporation incorporated in the United States and/or other
countries.

is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.
All brand and product names appearing in this manual are registered
trademarks of their respective companies.

002
Prior to using this camera, please read the user manual thoroughly.
If you require After Sales service, please bring the camera and the cause
of the camera malfunction (such as battery, Memory card etc.) to the A/S
centre.
Please check that the camera is operating properly prior to when you intend
to use it (e.g. for a trip or an important event) to avoid disappointment.
Samsung camera takes no responsibility for any loss or damages that may
result from camera malfunction.
Keep the manual in a safe place.
The contents and illustrations of this manual are subject to change without
prior notice for upgrading the camera functions.
If you use a card reader to copy the images on the memory card to your
PC, the images could be damaged. When transferring the images taken
with the camera to your PC, be sure to use the supplied USB cable to
connect the camera to your PC. Please note that the manufacturer accepts
no responsibility for loss or damage of images on the memory card due to
the use of a card reader.
DANGER
WARNING
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.





Do not attempt to modify this camera in any way. This may result in fire,
injury, electric shock or severe damage to you or your camera. Internal
inspection, maintenance and repairs should be carried out by your dealer
or Samsung Camera Service centre.
Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use
it. Switch off the camera, and then disconnect the power source. You must
contact your dealer or Samsung Camera Service centre. Do not continue
to use the camera as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the
camera through access points e.g. the memory card slot and battery
chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk of
electric shock.





Do not use the flash in close proximity to people or animals. Positioning
the flash too close to your subject’s eyes may cause eyesight damage.
For safety reasons keep this product and accessories out of reach of
children or animals to prevent accidents e.g.:
– Swallowing battery or small camera accessories. If an accident should
occur, please consult a doctor immediately.
– There is the possibility of injury from the camera’s moving parts.
Battery and camera may become hot during prolonged use and it may
result in camera malfunction. Should this be the case, allow the camera to
sit idle for a few minutes to allow it time to cool.
Do not leave this camera in places subject to extremely high temperatures,
such as a sealed vehicle, direct sunlight or other places of extreme
variances in temperature. Exposure to extreme temperatures may
adversely affect the camera’s internal components and could cause a fire.
When in use, do not cover the camera or Charger. This may cause heat
to build up and distort the camera body or cause a fire. Always use the
camera and its accessories in a well-ventilated area.
003
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.








Leaking, overheating, or burst battery could result in fire or injury.
– Use battery with the correct specification for the camera.
– Do not short circuit, heat or dispose of battery in fire.
– Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a long period
of time. Battery may leak corrosive electrolyte and permanently damage
the camera’s components.
Do not fire the flash while it is in contact with hands or objects. Do not
touch the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fire or electric shock.
Take care not to touch the lens or lens cover to avoid taking an unclear
image and possibly causing camera malfunction.
Avoid obstructing the lens or the flash when you capture an image.
When using this camera in low temperatures, the following cases may be
found. These are not camera malfunctions and usually recover at normal
temperature.
– It takes more time to turn on the LCD monitor and the colour may differ
from the subject.
– When changing the composition, there may be an after image on the
LCD monitor.
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
004
Contents
READY
008
System char
chart
009
Identification of features
013
016
017
Connecting to a power source
Inserting the memory car
card
Instructions on how to use the
memory car
card
When using the camera for the first
time
008
008
009
010
011
011
019
RECORDING
020
021
021
021
022
022
023
023
023
024
Package Contents
Sold Separately
Front & Top
Back
Bottom
5 Function button
LCD monitor indicator
Starting the Recording mode
Selecting modes
How to use the Auto mode
How to use the Program mode
How to use the ASR mode
How to use the Movie clip mode
Recording the movie clip without sound
Pausing while recording a movie clip
(Successive Recording)
How to use the Scene modes
Contents
025
026
026
026
026
027
028
029
030
031
033
034
035
035
036
036
037
038
038
039
040
040
040
041
042
043
044
Things to watch out for when taking
pictures
Focus lock
Using the camera buttons to set the
camer
camera
POWER button
Shutter button
FR (Face Recognition) button
ZOOM W / T button
Info / Up button
Macro / Down button
Flash / Left button
Self-timer / Right button
MENU / OK button
Fn button
How to use the Fn menu
Size
Quality / Frame rate
Drive mode
Metering
ISO
White balance
Exposure compensation
Long time shutter
Movie clip frame stabiliser
E (Effect) button
E (Effect) button : Colour
E (Effect) button : Colour Mask
E (Effect) button : Saturation
045
045
047
048
049
051
051
052
052
053
053
054
SETUP
E (Effect) button : FUN
Cartoon
Photo Frame
Pre-set focus frame
Composite shooting
Using the LCD monitor to adjust the
camera settings
Sharpness
Contrast
Focus Area
Voice Memo
Voice recording
Recording the movie clip without voice
054
055
Sound menu
Sound
056
057
Setup menu
SETUP1
055
055
055
055
055
057
057
057
058
058
058
Volume
Start up sound
Shutter sound
Beep Sound
AF sound
File name
Language
Setting up the Date / Time / Date type
World time
Imprinting the recording date
LCD brightness
005
Contents
059
059
059
SETUP2
062
Starting play mode
059
060
060
060
061
062
PLAY
062
063
063
064
064
065
065
066
066
066
068
068
069
069
069
070
071
006
Auto focus lamp
Start up image
Quick view
Auto power off
LCD save
Selecting video out type
Formatting a memory
Initialisation
Playing back a still image
Playing back a movie clip
Movie clip capture function
On camera movie trimming
Playing back a recorded voice
Playing back a voice memo
LCD monitor Indicator
Using the camera buttons to set the
camer
camera
Play mode button
Thumbnail / Enlargement button
Info / Up button
Play & Pause / Down button
Left / Right / Menu / OK button
Print button
Delete button
E (Effect) button : Resize
E (Effect) button : Rotating an image
071
072
072
073
074
074
074
074
074
074
075
075
076
077
078
080
E (Effect) button : Colour
E (Effect) button : Special colour
Colour Filter
Colour mask
E (Effect) button : Image editing
Red eye removal
Brightness control
Contrast control
Saturation control
Noise effect
E (Effect) button : FUN
Cartoon
Photo Frame
Preset focus frames
Composite image
Sticker
080
Setting up the play back function
using the LCD monitor
082
082
082
083
083
083
084
084
084
084
085
087
Starting the slide show
Start the slide show
Selecting Images
Configure slide show effects
Setting play interval
Setting Background Music
Playback
Voice memo
Protecting images
Deleting images
DPOF
Copy To Card
Contents
088
089
090
090
PictBridge
PictBridge : Picture Selection
PictBridge : Print Setting
PictBridge : Reset
100
101
101
091
MP3 / PMP / TEXT VIEWER mode
101
102
092
Starting the MP3 / PMP / TEXT
VIEWER mode
LCD monitor indicator for MP3 / PMP
/ TEXT VIEWER mode
Using the camera buttons to adjust
the camer
camera
091
094
095
095
095
095
096
096
097
098
098
098
099
099
099
099
100
100
Downloading files
Volume button
Play & Pause / Seeking button
Delete button
Hold / Equalizer button
Playlist button
Setting up the playback function
using the LCD monitor
Resume
Play mode
Skin of MP3 player
Playing back the slide show
Setting slide show interval
Delete all
Frame search
Display setting
Setting up the recording function in the
MP3 mode
SOFTWARE
Auto Scroll
MP3 BGM Setting
Language setting
101
World tour guide
104
106
107
109
Important notes
Warning indicator
Before contacting a service centr
centre
Specifications
112
113
113
114
117
119
120
120
121
Software notes
System requirements
About the softwar
software
Setting up the application softwar
software
Starting PC mode
Removing the removable disk
Setting up the USB Driver for MAC
Using the USB Driver for MAC
Removing the USB Driver for
Windows 98SE
Samsung Converter
Samsung Master
FAQ
121
123
126
Download the tour guide information
World Tour Guide mode
007
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the
optional equipment, contact your nearest Samsung dealer or Samsung service centre.
Package Contents
Camera
User manual,
Product warranty
Camera strap
AC adapter (SAC-46)/
USB cable (SUC-C2)
Software CD
(see p.113)
Earphones
Sold Separately
SD/SDHC memory card/
MMC(see p.18)
008
Camera case
AV cable
Rechargeable battery
(SLB-1137D )
Identification of features
Front & Top
Shutter button
Speaker
POWER button
Microphone
AF sensor/
Self-timer lamp
Flash
Lens
009
Identification of features
Back
M (Mode) button
FR (Face Recognition)
button /
MP3, PMP hold button
Play mode/Print button
Camera status lamp
Zoom T button (Digital zoom)
Earphones jack
Zoom W button (Thumbnail)
Fn/Delete button
LCD monitor
Camera strap
E (Effect) button
5-function button
010
Identification of features
Bottom
5 Function button
Battery chamber slot
Information/Up button
Self-timer/
Right button
Flash/
Left button
MENU/OK button
Tripod socket
USB/AV connection
terminal
Battery holder
Memory card slot
Macro/Down button
Play & Pause button
Battery chamber
cover
011
Identification of features

Self-timer lamp
Icon
Status
Description
When the printer is printing
Blinking
– For the first 8 seconds, the lamp blinks at 1
second intervals.
– For the final 2 seconds, the lamp blinks quickly
at 0.25-second intervals.
When the AF activates
Blinking
For the 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.

The lamp is off.
The lamp turns on.
(The camera is focused on the subject)
The lamp blinks.
(The camera doesn’t focus on the subject)
Mode icon : Refer to page 21 for more information about the
camera mode setting.
MODE
Auto
Program
ASR
Movie
SHOOTING

Camera Status Lamp
Status
Description
Power on
The lamp turns on and off when the camera is
ready to take a picture.
After taking a picture
The lamp blinks while saving the image data
and turns off when the camera is ready to take
a picture.
When the USB cable is
inserted to a PC
Transmitting Data
with a PC
When the USB cable is
inserted to a printer
012
Night Portrait Children Landscape
SCENE
Dawn
Back
light
Fire
works
The lamp lights up. (LCD monitor turns off
after initializing the device)
The lamp blinks. (LCD monitor turns off)
The lamp blinks and turns off when the printer
is ready to print a picture.
MULTIMEDIA
MP3
PMP
Beach
&Snow
Text
Selfshot
TEXT
VIEWER
Close-up Sunset
Food
Cafe
World Tour
Guide
Connecting to a power source
You should use the rechargeable battery SLB-1137D supplied with the
camera. Be sure to charge the battery before using the camera.

SLB-1137D rechargeable battery Specification
Model
SLB-1137D
Type
Lithium Ion
Capacity
1100mAh
Voltage
3.7V
Charging time
(When the camera is turned off)
Approx. 150 MIN

MP3
Number of images and battery life : Using the SLB-1137D
Battery life
/Number of
images
Still image
Approx. 115
MIN/
Approx. 230
shots
Movie
Approx. 110
MIN
Conditions
Using the fully charged battery, Auto
mode, 8M image size, Fine image
quality, Shot to shot interval : 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then Powering it off for 1 minute.
Using the fully charged battery 640x480
image size 30fps frame rate
Multimedia
PMP

Battery life
/Number of
images
Approx. 460
MIN
Approx. 300
MIN
Conditions
Using the fully charged battery LCD Off.
Using the fully charged battery
These figures are measured under Samsung’s standard conditions and
shooting conditions and may vary depending on the user’s methods.
Important information about battery usage.
 When the camera is not used, turn off the camera power.
 Please remove the battery if the camera will not be used for long
periods. Batteries can lose power over time and are prone to
leaking if kept inside the camera.
 Low temperatures (below 0°C) can affect the performance of the
battery and you may experience reduced battery life.
 Batteries will usually recover at normal temperatures.
 During extended use of the camera, the camera body may
become warm. This is perfectly normal.
 When you use earphones, do not remove the battery while the
camera is turning on. It may generate a loud noise.
013
Connecting to a power source
You can charge the rechargeable battery (SLB-1137D) by using the
SAC-46 KIT which consists of the AC adapter (SAC-46) and the USB
cable (SUC-C2).
When the SAC-46 and SUC-C2 are combined, they can be used as an
AC cable.
014

Using an AC cable:
Connect the AC adapter to the
USB cable.
It can be used as a power cable.

Using a USB cable:
Remove the AC adapter (SAC-46).
You can download stored images to
your PC (p.118) or supply the power
to your camera through the USB
cable.
Important information about USB cable usage.
 Use a USB cable (SUC-C2) with the correct specification.
 If the camera is connected to the PC through a USB hub :
connect the camera directly to the PC.
 If the camera and other devices are connected to the PC at
the same time : remove other device.
 If the USB cable is connected to a port located on the front
of the PC : remove the cable and connect it to a port located
on the back of the PC.
 If the USB port of the PC doesn’t meet the Power output
standard (5V, 500mA), the camera may not be charged.
Connecting to a power source

How to charge the rechargeable battery (SLB-1137D)

Charging LED of the AC Adapter
Charging LED
Being Charged



Before inserting any cables or AC adapter, check the directions
and do not insert by force. It may cause breakage of cable or
camera.
If the charging LED of the AC Charger does not turn on or blink
after inserting the rechargeable battery, please check whether
the battery is inserted correctly.
If you charge the battery with the camera power on, the battery
can’t charge fully. Turn the camera off while charging the
battery.
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on
– If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. This is because of the low battery capacity.
Charge the battery for more than 10 minutes before using the camera.
– Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger is inserted,
the camera power may be turned off because the rechargeable battery is
discharged again.
015
Connecting to a power source
Inserting the memory card
Insert the battery as shown.
Insert the memory card as shown.
– If the camera does not turn on
after you have inserted battery,
please check whether the battery
is inserted with the correct
polarity (+/-).
– When the battery chamber
cover is opened, do not force it.
This may cause damage to the
battery chamber cover.

- Turn off the camera’s power
before inserting the memory
card.
- Have the front of the memory
card facing toward the back of
the camera (LCD monitor) and
the card pins toward the front of
the camera (Lens).
- Do not insert the memory card
the wrong way round.
Doing so may damage the memory card slot.
There are 4 indicators for battery condition that are displayed
on the LCD monitor.
Battery
indicator
Battery
status
016
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Low battery
capacity
Prepare to
recharge or
use spare
battery)
Battery empty.
Recharge or
use spare
battery.
Instructions on how to use the memory card











Be sure to format the memory card (see p.61) if you are using a newly
purchased memory for the first time, if it contains data that the camera
cannot recognise, or if it contains images captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or
removed.
Repeated use of the memory card will eventually reduce the memory
card’s performance. Should this be the case, you will need to purchase a
new memory card. Wear and tear on the memory card is not covered by
the Samsung warranty.
The memory card is an electronic precision device. Do not bend, drop or
subject the memory card to any heavy impact.
Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in
temperature.
Do not allow the memory card to become dirty or to come into contact with
any liquid. Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory
card is warm. This is perfectly normal.
Do not use a memory card that is used in another digital camera. To
use the memory card in this camera, format the memory card using this
camera.
Do not use a memory card formatted by another digital camera or memory
card reader.




If the memory card is subjected to any of the following, the recorded data
may become corrupted :
– When the memory card is used incorrectly.
– If the power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g.
floppy disks, hard disks, CD etc.
If there is insufficient memory available :
A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory
card or delete unnecessary images stored on the memory card.

Don’t remove the memory card when the camera status lamp
is blinking as this may cause damage to data in the memory
card.
017
Instructions on how to use the memory card
The camera can use SD/ SDHC Memory Cards and MMC (Multi Media
Cards).
Card pins
When using a 256MB MMC memory, the specified shooting capacity
will be as follows. These figures are approximate as image capacities
can be affected by variables such as subject matter and memory card
type.
Recorded
image size
Write protect
switch
Label
Still
image
<SD (Secure Digital) memory card>
The SD/ SDHC memory card has a write protect switch that prevents image
files from being deleted or formatted. By sliding the switch to the bottom of the
SD memory card, the data will be protected. By sliding the switch to the top of
the SD memory card, the data protection will be cancelled.
Slide the switch to the top of the SD memory card before taking a picture.
* Movie
clip

018
Super
Fine Normal
Fine
30FPS
20FPS
15FPS
49
94
135
–
–
–
58
107
171
–
–
–
71
133
202
–
–
–
86
161
220
–
–
–
128
226
306
–
–
–
372
520
600
–
–
–
–
–
–
–
About
9’03”
–
–
–
–
About
10’31”
–
About
17’26”
–
–
–
About
29’08”
–
About
54’57”
The recording times can be changed by the zoom operation.
The zoom button doesn’t function during the movie recording.
When using the camera for the first time



Charge the rechargeable battery fully before using the camera for the first
time.
When the camera is turned on for the first time, a menu will be displayed
to set date/time, language and battery type in the LCD monitor. This menu
will not be displayed after setting up. Set up the date/time, language and
battery type before using this camera.
Setting up the language
1. Select the [Language] menu by pressing
the Up/Down button and press the
SETUP1
Language
ENGLISH
Right button.
Date&Time
한국어
2. Select the desired sub menu by
World Time
FRANÇAIS
DEUTSCH
pressing the Up/Down button and press
ESPAÑOL
the OK button.
ITALIANO
– You can select one of 22 languages.
OK Set
Back
These are listed below :
English, Korean, French, German, Spanish, Italian, S.Chinese,
T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai, Bahasa (Malay / Indonesian), Arabic, Czech,
Polish, Hungarian and Turkish.

Setting up the date, time and date type
1. Select the [Date&Time] menu by
pressing the Up/Down button and press SETUP1
Language
the Right button.
2007 / 08 / 01
Date&Time
2. Select the desired sub menu by
World Time
13:00
pressing the Up/Down/Left/
Left Right
Left/
yy/mm/dd
button and press the OK button.
Right button:
Selects YEAR/
OK Set
Back
MONTH/ DAY/
HOUR/ MINUT/ DATE TYPE
Left button:
Moves the cursor to the [Date&Time] main menu
if the cursor is at the first item of the date and time
setup. In all other instances, the cursor will be
shifted to the left of its current position.
Up/Down button: Changes the value of each item.

For more information about the World Time, refer to the page 58.
019
LCD monitor indicator
The LCD monitor displays information about the shooting functions and
selections.
① ②
③
④
00013
⑲
⑳
No.
Description
4
Battery
p.16
5
Image Size
p.36
6
Image Quality/Frame Rate
⑤
7
Drive mode/Stabiliser
Icons
Page
p.36
/
p.37/40
⑥
8
Metering
p.38
⑰
⑦
9
ISO
p.38
⑯
⑧
10
White Balance
p.39
⑨
11
Exposure compensation
/LongTime Shutter
⑩
12
Date/Time
13
Contrast
14
Sharpness/Mic. off
⑱
⑮
⑭
01:00 PM
2007 / 08 / 01
⑬
<Image & Full Status>
⑪
⑫
No.
Description
Icons
Page
1
Memory card icon/
Internal memory icon
/
-
2
Number of available shots
remaining/Remaining time
00013/00:00:00
p.18
3
Optical/Digital Zoom bar/
Digital Zoom rate
x 5.0
p.28
020
/L T
p.40
2007/08/01 01:00 PM
p.57
p.52
/
p.51/23
15
Flash
16
Macro
17
Self-timer
18
Face Recognition/
Color/Saturation
19
Recording mode
p.12
20
Voice Memo
p.53
21
Auto Focus Frame
p.52
22
Camera shake Warning
p.22
p.31~33
AF
p.30~31
p.34
/
/
p.27/
42/44
Starting the Recording mode
Selecting modes
How to use the Auto mode
You can select the desired working mode using the M (Mode) button
located on the back of the camera.
Select this mode for quick and easy picture taking with minimal user
interaction.
 How to use the Mode button
00013
01:00 PM
2007 / 08 / 01
SCENE
<Auto mode>
SHOOTING
<Pressing
the Mode
button>
AUTO
AUTO
ASR
MULTIMEDIA
SHOOTING
MOVIE
PROGRAM
<Pressing the Right button>
SCENE
<Program mode>
SCENE
PROGRAM
<Pressing the Left button>
SHOOTING
MULTIMEDIA
<Mode selection menu>
ASR
<Pressing
the Up
button>
MULTIMEDIA
FOOD
CAFE
NIGHT
PORTRAIT CHILDREN
SHOOTING
<Scene mode>
Auto

MULTIMEDIA
<Movie Clip mode>
MULTIMEDIA
<Pressing the
Left Right button>
Left/
SCENE
MOVIE
1. Insert the battery (p.16) taking note of
00013
the correct polarity (+/-).
2. Insert the memory card (p.16). As
this camera has a 190MB internal
memory, it is not essential to insert the
memory card. If the memory card is not
01:00 PM
inserted, an image will be stored in the
2007 / 08 / 01
internal memory. If the memory card is
inserted, an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera. (If the date/time that
is displayed on the LCD monitor is incorrect, reset the date/time before
taking a picture.)
5. Select the Auto mode by pressing the Mode button.
6. Point the camera towards the subject and compose the image.
7. Press the Shutter button to capture an image.
SCENE
CAFE
NIGHT
PORTRAIT

CHILDREN LANDSCAPE
SHOOTING
<Selecting a scene mode>
If the auto focus frame turns to red when you press the Shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is less
likely to capture an image clearly.
Avoid obstructing the lens or the flash when you capture an
image.
021
Starting the Recording mode
How to use the Program mode

Selecting the automatic mode will configure the camera with optimal
settings and you can manually configure various functions.
1. Select the Program mode by pressing
the M (Mode) button (p.21).
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture
an image.
 Refer to page 35-50 for more
information about the Program mode menus.
00013
01:00 PM
2007 / 08 / 01
– If the image size is (
How to use the ASR mode
This mode will reduce the effect of camera shake and help you get a
well exposed image in dim conditions.
1. Select the ASR mode by pressing the
M (Mode) button. (p.21)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
022
Things to watch out for using the ASR mode
– The digital zoom will not operate in the ASR mode.
– If the lighting conditions are brighter than fluorescent lighting conditions,
the ASR will not activate.
– If the lighting conditions are darker than in fluorescent lighting
conditions, camera shake warning indicator ( ) will be displayed. For
best results only take pictures in situations where the camera shake
warning indicator ( ) is not displayed.
– If the subject is moving, the captured image may be blurred.
– Avoid moving the camera while the [Capturing!] message is displayed
to achieve a better result.
– As the ASR uses the camera’s digital signal processor, it may take a
little longer for the camera to process and save the images.
00013
01:00 PM
2007 / 08 / 01
) or (
),the ASR mode can’t be selected.
Starting the Recording mode
How to use the Movie clip mode
A movie clip can be recorded for up to
2hours.
00:30:25
1. Select the Movie clip mode by pressing
the M (Mode) button.(p.21)
2. Point the camera towards the subject
and compose the image by using the
● Standby
LCD monitor.
3. Press the Shutter button once and movie clips are recorded for up to 2hours.
Movie clips will still be recorded if the Shutter button is released.
If you wish to stop recording, press the Shutter button again.
 Image size and type are listed below.
– Image size: 800x592, 640x480, 320x240
– Movie clip file type: AVI (MPEG-4)
– Frame Rate: 30FPS, 20FPS, 15FPS
– The frame rate cannot be selected when the following image size is
selected.
800x592 : 30FPS, 15FPS
640x480, 320x240 : 20FPS
Recording the movie clip without sound
You can record the movie clip without
sound.
Steps from 1-3 are the same as those for
Movie clip mode.
4. Press the MENU button.
5. Select the [RECORDING] menu by
pressing the Left/
Left Right button.
6. Press the Down button to select the
[Voice Mute] menu and press the Right
button.
7. Select the [On] menu by pressing the
Up/Down button.
8. Press the OK button. You can record a
movie without sound.
00:30:25
● Standby
RECORDING
Voice Mute
Back
Off
On
OK Set
Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes,
while recording a movie clip. Using this function, you can record your
favourite scenes into a movie clip without having to create multiple
movie clips.

Using Successive Recording
Steps from 1-2 are the same as those for
Movie clip mode.
3. Point the camera towards the subject
and compose the image by using the
LCD monitor. Press the Shutter button
and movie clips are recorded for as long
00:00:18
as the available recording time. Movie
REC
SH Stop
clips will still be recorded if the Shutter
button is released.
4. Press the Play & Pause (
) button to pause recording.
5. Press the Play & Pause (
) button again to resume the recording.
6. If you wish to stop recording, press the Shutter button again.
023
Starting the Recording mode
How to use the Scene modes
Use the menu to easily configure optimal settings for a variety of
shooting situations.
1. Select the Scene mode by pressing
the M (Mode) button (p.21).
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture
an image.
00013

The scene modes are listed below.
Icons
Scene modes
[NIGHT]
[PORTRAIT]
[CHILDREN]
01:00 PM
2007 / 08 / 01
[LANDSCAPE]
[TEXT]
[CLOSE UP]
[SUNSET]
[DAWN]
[BACKLIGHT]
[FIREWORK]
[BEACH&SNOW]
[SELF SHOT]
[FOOD]
[CAFÉ]
024
Description
Use this for shooting still images at night
or in other dark conditions.
To take a picture of a person.
To take a picture of fast moving objects,
for example, children.
To take pictures of distant scenery.
Use this mode to shoot a document.
Close-up shooting for small objects such
as plants and insects.
For taking pictures of sunsets.
Daybreak scenes.
Portrait without shadows caused by
backlight.
Firework scenes.
For ocean, lake, beach and snowscape
scenes.
Use when the photographer would also
like to appear in the image.
For taking delicious looking food.
For taking pictures in cafes and
restaurants.
Things to watch out for when taking pictures

Pressing the Shutter button down half way.
Lightly press the Shutter button to confirm focus and flash battery charge.
Press the Shutter button all way down to take the picture.
<Lightly press the Shutter button>





<Press the Shutter button>

Under certain conditions the auto focus system may not perform as
expected.
– When photographing a subject that has little contrast.
– If the subject is highly reflective or shiny.
– If the subject is moving at high speed.
– When there is strong reflected light, or when the background is very
bright.
– When the subject matter has only horizontal lines or the subject is very
narrow (such as a stick or flagpole).
– When the surroundings are dark.
The available memory capacity may vary depending on shooting
conditions and camera settings.
When the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator ( ) may appear on the
LCD monitor. In this case, use a tripod, support the camera on a solid
surface or change to flash shot mode.
Shooting against the light : Please do not take pictures against the sun.
Doing so may make the picture dark. To take a picture against the light,
please use the [BACKLIGHT] in the scene shooting mode (see page
24), fill-in flash (see page 32), spot metering (see page 38), or exposure
compensation (see page 40).
Avoid obstructing the lens or the flash when you capture an image.
Compose the image by using the LCD monitor.
025
Focus lock
Using the camera buttons to set the camera
To focus on a subject not positioned in the centre of the picture, use the
focus lock function.
The recording mode function can be set up by using the camera
buttons.

Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the Shutter button halfway. When the green auto focus frame
lights up, it means the camera is focused on the subject. Be careful
not to press the Shutter button all the way down to avoid taking an
unwanted picture.
3. With the Shutter button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press the
Shutter button completely to take the picture. If you release your finger
from the Shutter button, the focus lock function will be cancelled.
00013
00013
00013
F 3.5
1/45s
01:00 PM
2007 / 08 / 01
1. The image to be
captured.
026
F 3.5
1/45s
01:00 PM
2007 / 08 / 01
2. Press the Shutter
button halfway and
focus on the subject.
01:00 PM
2007 / 08 / 01
3. Recompose the
picture and fully
depress the Shutter
button.
POWER button
Used for turning the camera’s power on/off.
If there is no operation during the specified
time, the camera’s power will be turned off
automatically to save battery life.
Refer to page 60 for more information about
the auto power off function.
Shutter button
Used for taking an image or recording voice in the Recording mode.
 In Movie clip mode
Pressing the Shutter button down fully
starts the process for recording a movie
clip. Press the Shutter button once
and the movie clip is recorded for as
long as the available recording time in
the memory allows. If you wish to stop
recording, press the Shutter button
again.
 In Still image mode
Pressing the Shutter button down halfway activates the autofocus and
checks the condition of the flash. Pressing the Shutter button down
fully takes and stores the image. If you select voice memo recording,
the recording will start after the camera has finished storing the image
data.
FR (Face Recognition) button
This mode detects the face position of the subject automatically and
then sets the focus and exposure. Select this mode for quick and easy
face picture. In MP3 and PMP mode, this button will lock the camera
buttons.

Selectable modes: Auto, Program, ASR, Scene modes (Portrait, Children,
Beach & Snow, Self-shot, Cafe)


1. Press the FR (Face Recognition) button
( ) in the selectable modes. The FR
icon will be displayed on the left side of
the screen.





00013
01:00 PM
2007 / 08 / 01
2. The size and position of the auto focus
frame is set at the face of the subject
automatically.
3. Press the Shutter button halfway. The
focus frame turns to green when the
focus is activated.
4. Press the Shutter button fully to take a
picture.
00013


This function can detect up to 9 people.
When the camera recognises many people at the same time, it
will focus on the nearest person.
The Digital zoom is not activated in this mode.
The effects functions are not activated in this mode.
When the camera detects a target face, the white colour focus
frame will be displayed over the target face and the gray colour
focus will appear over the remaining faces(up to 8). Press the
Shutter button halfway down to focus on the face and the white
focus frame turns green.(Total 9)
Return to previous AF mode if face detection was failure.
In some conditions this function cannot work properly.
– When a person wears dark glasses or some part of the face is
hidden.
– When the person being taken does not look at the camera.
– When the camera doesn’t detect a face because of too much
or too little light.
– There is too great a distance between the camera and the
subject.
The maximum available Face Recognition range is 3.1m (Wide).
The nearer the subject, the faster the camera can recognize the
subject.
01:00 PM
2007 / 08 / 01
027
ZOOM W / T button
If the menu is not displayed, this button
works as the OPTICAL ZOOM or
DIGITAL ZOOM button. This camera has
a 5X optical zoom and a 5X digital zoom
function. Using both will offer a total zoom
ratio of 25X.


Optical zoom WIDE : Pressing the Zoom W button. This will zoom out
from the subject i.e. the subject will appear further
away. Pressing the Zoom W button continuously will
set the camera to its minimum zoom setting i.e. the
subject appears at its furthest from the camera.
TELE Zoom
Pressing
the
Zoom W
button
00013
Optical zoom TELE: Pressing the Zoom T button. This will zoom into the
subject i.e. the subject will appear nearer.
Digital zoom TELE: When the maximum (5X) optical zoom is selected,
pressing the Zoom T button activates the digital
zoom software. Releasing Zoom T button stops the
digital zooming at the required setting. Once the
maximum digital zoom (5X) is achieved, pressing
the Zoom T button will have no effect.
Pressing
the
Zoom T
button
00013
WIDE Zoom
Pressing
the
Zoom T
button
00013
01:00 PM
2007 / 08
01:00 PM
2007 / 08
<WIDE zoom>
<TELE zoom>
00013
X5.0
01:00 PM
2007 / 08
<Digital zoom 5.0X>
01:00 PM
2007 / 08
00013
01:00 PM
2007 / 08
01:00 PM
2007 / 08
<TELE zoom>
<Optical zoom 2X>
<WIDE zoom>
Digital zoom WIDE : When the digital zoom is in operation, pressing
the Zoom W button will reduce the digital zooming
Optical zoom
in steps. Releasing Zoom W button stops digital
X5 zooming. Pressing the Zoom W button will reduce
the digital zoom and then it will continue to reduce the
Digital zoom
optical zoom until the minimum setting is reached.
00013
X5.0
01:00 PM
2007 / 08
<Digital zoom 5.0X>
028
Pressing
the
Zoom W
button
00013
Pressing
the
Zoom W
button
Pressing
the
Zoom W
button
00013
01:00 PM
2007 / 08
<TELE zoom>
00013
01:00 PM
2007 / 08
<WIDE zoom>
ZOOM W / T button






Images taken using the digital zoom may take a little longer for
the camera to process. Allow time for this to take place.
The digital zoom cannot be used in movie clip shots.
You may notice a decrease in image quality when using the
digital zoom.
To view a clearer digital zoom image, press the Shutter button
halfway at the maximum optical zoom position and press the
Zoom T button again.
The digital zoom can’t be activated in some Scene modes
(Night, Children, Text, Close-up, Fireworks, Food), Face
Recognition mode, ASR mode, the Movie Clip mode and FUN
effect mode.
Take care not to press the lens as this may cause a camera
malfunction.
Info (
) / Up button
While the menu is showing, the Up button operates as a direction
button. In the recording modes or playback mode, pressing this button
will display the image information.
00013
00013
Info (
) button
01:00 PM
2007 / 08 / 01
029
Macro (
) / Down button
While the menu is showing, press the Down button to move from the
main menu to a sub menu, or to move down the sub menu. When
the menu is not showing, you can use the Macro/Down button to
take macro pictures. The distance ranges are shown below. Press the
Macro button until the desired macro mode indicator appears on the
LCD monitor.
00013
<Auto Focus>
01:00 PM
2007 / 08 / 01
<Macro (
00013
Types of focus mode and focus range (W: Wide, T: Tele)
Mode
Focus range
)>
Focus range
Focus range
030
01:00 PM
2007 / 08 / 01
<Super Macro (
)>

Super macro(
–
Macro(
)
Normal
W : 80 ~ Infinity
T : 80 ~ Infinity
)
)
Normal
W : 5 ~ 80
T : 30 ~ 80
Mode
Focus Type
)
W : 5 ~ Infinity
T : 30 ~ Infinity
)
(Unit: cm)
)
Auto macro(
Program(
W:1~5
(Wide only)

)>
)
–
Super macro(

<Auto Macro (
Super macro(
Focus Type
00013
01:00 PM
2007 / 08 / 01
Auto(
Focus Type
Mode
00013
01:00 PM
2007 / 08 / 01

W : 80 ~ Infinity
T : 80 ~ Infinity
ASR mode(
)
Auto macro(
)
W : 5 ~ Infinity
T : 30 ~ Infinity
Normal
W : 80 ~ Infinity
T : 80 ~ Infinity
When the macro mode is selected, be particularly careful to
avoid camera shake.
When you take a picture within 20cm (Wide zoom) or 50cm
(Tele zoom) in the Macro mode, select the FLASH OFF mode.
When you take a picture within the 5cm Super macro range,
the autofocus on the camera will take longer to set the correct
focus distance.
Macro (

Flash ( ) / Left button
) / Down button
Available focusing method, by Recording mode
(: Selectable, ∞: Infinity focus range)
Mode
Auto macro
Super macro
Macro





Auto macro


Selecting the flash mode


Mode
Normal
When the menu is displayed on the LCD monitor, pressing the Left
button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the Left button
operates as the Flash( ) button.
SCENE
Super macro
Macro
1. Press the Mode button to select a Recording mode with the exception
of the Movie clip mode or the ASR mode. (p.21)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor. Use the
correct flash to suit the environment.

Normal



∞

Flash range

ISO

∞
AUTO
∞

∞

(Unit : m)
Normal
Macro
Auto macro
WIDE
TELE
WIDE
TELE
WIDE
TELE
0.8 ~ 4.0
0.8 ~ 2.8
0.2 ~ 0.8
0.5 ~ 0.8
0.2 ~ 4.0
0.5 ~ 2.8
When the Super Macro is selected, flash is fixed as the Flash Off mode.




031
Flash ( ) / Left button







032
If you press the Shutter button after selecting the Auto, Fill-in,
Slow synchro flash, the first flash fires to check the shooting
condition (Flash range and Power ratio of flash). Do not move
the camera until the second flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for
the flash is usually within 5 seconds. If the battery is weak, the
charging time will be longer.
In the ASR mode, [LANDSCAPE], [CLOSE UP], [TEXT],
[SUNSET], [DAWN], [FIREWORK], [SELF SHOT], [FOOD],
[CAFÉ] scene modes and the Movie clip mode, the flash
function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close
or highly reflective.
When taking an image in poorly lit conditions with the flash,
there may be a white speck in the captured image. The speck
is caused by the the flash light reflecting off atmospheric dust.

Flash mode indicator
Icon
Flash mode
Auto flash
Description
If the subject or background is dark, the
camera flash will operate automatically.
If a subject or background is dark, the
Auto & Red eye camera flash will work automatically and will
eduction
reduce the red-eye effect by using the redeye reduction function.
Fill in flash
The flash fires regardless of the available
light. The intensity of the flash will be
automatically controlled to suit the prevailing
conditions.
Slow synchro
The flash operates with a slow shutter speed
to obtain a balanced correct exposure. In
poor lighting conditions the camera shake
warning indicator ( ) will display on the
LCD monitor.
Flash off
The flash does not fire.
Select this mode when capturing images in
a place or situation where flash photography
is prohibited. When you capture an image
in a poorly lit condition, the camera shake
warning indicator ( ) will appear on the
LCD monitor.
Red-eye
reduction
When a shot with “red eye” is detected,
this mode will reduce the red-eye effect
automatically.
Flash ( ) / Left button

Available flash mode, by Recording mode






Self-timer (
(: Selectable)




) / Right button
When the menu is displayed on the LCD monitor, pressing the Right
button makes the cursor shift to the right tab. When the menu is not
displayed on the LCD monitor, the Right button operates as the
Self-timer ( ) button. This function is used when the photographer
would also like to be in the image.

















If you operate the Self-timer( ) button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
In Movie Clip mode, only the 10SEC self-timer will work.
When you select 2SEC self-timer with flash, the delay
(2 seconds) can be extended according to the flash charging
status.









033
Self-timer (

) / Right button
Selecting the self-timer
MENU / OK button

– When you press the MENU button, a menu related to each camera
mode will be displayed on the LCD monitor. Pressing it again will return
the LCD to the initial display.
– A menu option can be displayed when the following are selected :
Movie clip and Still image mode. There is no menu available when the
Voice recording mode is selected.
1. Select a Recording mode with the
00013
exception of Voice recording mode.
(p.21)
2. Press the Self-timer ( ) button until
the desired mode indicator displays on
the LCD monitor.
01:00 PM
3. When you press the Shutter button, the
2007 / 08 / 01
picture will be taken after the specified <Selecting the 10 SEC self-timer>
time has elapsed.
Icon
Self-timer Mode
00013
Pressing the
MENU button
Description
Pressing the Shutter button will allow an
10SEC self-timer interval of 10 seconds before the image is
taken.
2SEC self-timer
Pressing the Shutter button will allow an interval
of 2 seconds before the image is taken.
A picture will be taken after about 10 seconds
Double self-timer and 2 seconds later a second picture will be
taken.
034
MENU button
01:00 PM
2007 / 08 / 01
<Menu off>

RECORDING
Sharpness
Contrast
Focus Area
Voice Memo
Voice Record
Move
Normal
Normal
Center AF
Off
MENU Exit
<Menu on>
OK button
– When the menu is displayed on the LCD monitor, this button is used for
shifting the cursor to the sub menu or for confirming data.
Fn button
You can use the Fn button to set the following menus.
(: Selectable)
Page
Size





p.36
Quality/
Frame Rate





p.36
Drive


Metering

1. Press the Fn button in an available mode
2. Select a desired menu by pressing the Up/Down button. And then a
sub menu will be displayed on the bottom left side of the LCD monitor.
FINE
8M 3264x2448
p.37

Up/Down
button
p.38
ISO

White
Balance


p.39
EXPOSURE
VALUE


p.40
LONG TIME
SHUTTER
How to use the Fn menu
p.38
*1
p.40

Stabilisation
*1 This menu is only available in the Night scene mode (

).
p.40
3. Select a desired menu by pressing the Left/
Left Right button and then
press the OK button.
8M 3264x2448
7MP 3264x2176
Left Right
Left/
button
035
Size
Quality / Frame rate
You can select the image size appropriate for your application.
You can select the compression ratio appropriate for your application of
the captured images. The higher the compression ratio, the lower the
picture quality.
Still
image
Mode
Icon
Movie
clip
Mode
Icon
Sub menu
Super Fine
Fine
Size
File Format
jpeg
jpeg
Size
3264x
2448
3264x
2176
800x592
3264x
1836
2592x
1944
640x480
2048x
1536
1024x
768
320x240
Mode
Still image Mode
FINE
8M 3264x2448

036
Normal 30FPS 20FPS 15FPS
jpeg
avi
avi
avi
20FPS
800 x 592
< Still image mode >
< Still image mode >
Movie clip mode
Icon
< Movie clip mode >
< Movie clip mode >
The higher the resolution, the lower the number of shots
available because high resolution images require more
memory.


This file format complies with the DCF (Design rule for Camera
File system).
JPEG (Joint Photographic Experts Group) :
JPEG is the image compression standard developed by the
Joint Photographic Experts Group. This type of compression
is most commonly used for compressing photos and graphics
because it can compress the files efficiently.
Drive mode
You can select continuous shot, and AEB (Auto Exposure Bracketing).
Single
Icon
Drive Mode
[Single]
Description
Take one picture only.
Images will be taken continuously until the Shutter
[Continuous]
button is released.
[Motion
Capture]
[AEB]
This takes 6 shots per second for up to 5 seconds,
when the shutter is pressed and held down. After
completing the continuous shooting, images are
saved automatically. The maximum number of shots
is 30 and the image size is fixed as VGA.
Take three pictures in a series in different
exposures: standard exposure (0.0EV), short
exposure (-1/3EV) and over exposure (+1/3EV).
Two images are taken at a time. One is taken in the
Fill-In Flash mode and the other is taken in the ASR
[Wise Shot] mode.After completing the two shooting, images are
saved automatically. (This mode is available only in
the ASR mode)

How to use the wise shot
1. Select the ASR mode bu pressing the
mode button.
2. Press the Fn button. (p.35)
Wise Shot
3. Select the (
) menu.
4. Press the Shutter button to capture
images.
– Two images are captured in
succession.






High resolution and picture quality increases file saving time,
which increases stand-by time.
If the [Continuous], [Motion Capture] or [AEB] sub menu is
selected, the flash will be off automatically.
If less than 3 pictures are available in the memory, the AEB
shooting is not available.
If less than 30 pictures are available in the memory, the motion
capture is not available.
It is best to use a tripod for the AEB shooting as the time to
save each image file is longer and blurring caused by camera
shake may occur.
In the Wise shot mode, the shutter speed value shown on the
LCD monitor may be different to the actual shutter speed.
037
Metering
ISO
If you cannot obtain suitable exposure conditions, you can change the
metering method to take brighter pictures.
You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO
numbers.
multi
AUTO
Icon
Metering
Mode
[Multi]

Description
Exposure will be calculated based on an average
of light in each image area divided into multiple
regions. However, the calculation will be biased
towards the centre of the image area. This is
suitable for general use.
[Spot]
Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable
when the subject in the centre is exposed correctly,
regardless of the back lighting.
[Center]
Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the centre of the
image area. This is suitable for taking a picture of
small objects like flowers or insects.
If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance, it is
better to use exposure compensation.
038
Icon
ISO Mode
[Auto]
Description
The camera’s sensitivity is automatically changed
by variables such as lighting value or subject
brightness.
You can increase the shutter speed while the same
amount of light is present, by increasing the ISO
[ISO 100] sensitivity. However, the image may be saturated in high
[ISO 200] luminance. The higher the ISO value, the higher the
[ISO 400] camera’s sensitivity to light and therefore the greater its
[ISO 800] capacity to take pictures in dark conditions. However,
the noise level in the image will increase as the ISO
[ISO 1600]
value increases, making the image appear coarse.
[ISO 80]
White balance
The white balance control allows you to adjust the colours to appear
more natural.
AUTO
Icon
White balance
Mode
Description
[Auto WB]
The camera automatically selects the
appropriate white balance settings, depending
on the prevailing lighting conditions.
[Daylight]
For taking images outside.
For taking images under a cloudy and overcast
sky.
For shooting under daylight fluorescent types
[Fluorescent_H]
of threeway fluorescent lighting.

Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for
a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM ( ) menu of the
White Balance and place a sheet of
white paper in front of the camera so
that the LCD monitor shows only white.
2. MENU/OK
OK button: Selects previous
custom white
balance.
White paper
Shutter button: saves new custom white balance.
– The custom white balance value will be applied, starting with the
next picture you take.
– The user configured white balance will be remain effective until it is
overwritten.
[Cloudy]
[Fluorescent_L] For shooting under white fluorescent lighting.
[Tungsten]
[Custom Set]

For shooting under tungsten (standard light
bulb) lighting.
Allows the user to set the white balance
according to the shooting conditions.
Different lighting conditions may cause a colour cast on your images.
039
Exposure compensation
Long time shutter
This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the Fn button.
This camera automatically adjusts the shutter speed and aperture
values to the shooting environment. However, in Night scene mode,
you can set the shutter speed and aperture values to your preference.

Compensating Exposure
1. Press the Fn button, and then use the
Up/Down button to select the exposure
compensation ( ) icon. The exposure
compensation menu bar will appear as
shown.
2. Use the Left/
Left Right button to set the
EXPOSURE VALUE
-2
-1
0
+1
+2
desired exposure compensation factor.
0
3. Press the Fn button again. The value
you set will be saved and the Exposure Compensation setup mode will
close. If you change the exposure value, the exposure indicator ( )
will be displayed on the bottom of the LCD monitor.

A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor should appear white or you may not
get good pictures.

Changing the Shutter speed and
Aperture value
1. Select the [NIGHT] scene mode. (p.24)
2. Press the Fn button and Long Time
shutter menu will be displayed.
3. Configure the Long Time shutter value
with the 5 function button.
4. Press the Fn button again. The value
you set will be saved and the mode will
switch to Night scene mode.
F 3.5
1S
Aperture Value
Wide: Auto, F3.5 ~ 5.5
Tele: Auto, F4.9 ~ 8.0
Shutter Speed
Auto, 1 ~ 16S
Movie clip frame stabiliser
This function helps stabilize images captured during movie recording.
You can select this menu only in the Movie clip mode. If the memory
card is not inserted, this function will not operate.
[Off]:
[On]:
040
LONG TIME SHUTTER
Movie clip frame stabilizer
function is disabled.
Prevents camera shake during
movie recording.
OFF
E (Effect) button
It is possible to add special effects to your images by using this button.



Still image mode: You can select the colour, special colour, image editing
and Fun menu. In the Auto mode, you can select the
[COLOR] menu only.
Movie clip mode: You can select the colour menu.
Available Effects, by Recording mode (: Selectable)



This button will not operate in ASR, Voice recording mode and
some scene modes ([NIGHT], [TEXT], [SUNSET], [DAWN],
[BACKLIGHT], [FIREWORK], [BEACH&SNOW]).
Even if the camera is turned off, the effect setting will be
preserved. To cancel the special effect, select the (
) sub
menu in the Colour menu and select the (
) sub menu.
If the image size is (
selected.
) or (
), the FUN menu can’t be


























































041
E (Effect) button : Colour
By using the camera’s digital processor, it is possible to add special
effects to your images


Press the E button in an available recording mode. (p.41)
COLOR
Custom Color: You can change the
R (Red), G (Green) and B (Blue)
values of the image.
Custom Color
COLOR
Move
– Up/Down button: Selects R, G, B
– Left/
Left Right button: Changes the values
Move
E
Exit
<Still image mode>
Move
E
[Normal]
Description
No colour effect is added to the image.
[B/W]
Captured images will be stored in black and white.
[Sepia]
Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
[Red]
[Green]
[Blue]
[Negative]
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Save the image in negative mode.
[Custom Color] Captured image will be saved in set RGB tone.
042
Custom Color
<Movie clip mode>
Move

COLOR
Set
Exit
1. Select a desired sub menu by pressing the Up/Down button and press
the OK button.
2. Press the Shutter button to capture an image.
Icon
OK
In the Auto mode, the Custom Color can’t be selected.
OK Set
E (Effect) button : Colour Mask
With this menu, you can select a part you want to highlight. The rest of the image will be black and white.
Press the E button in an available recording mode. (p.41)

00013
00013
Color Mask
Press the OK button and the Mask mark
will be displayed on the LCD monitor.
E
SH Capture
OK Set
Back
Press the Fn button. You can change
the size and location of the mask.
Fn Edit
Move
T/W Size
Zoom W
W//T
/T button :
Changing the Mask size
00013
00013
00013
Press the Shutter button and the mask
added image is taken.
Pressing the Fn button.
SH Capture
<Final image>
Fn Edit
<Mask added image>
Move
T/W Size
Up/Down/Left/
Left Right button :
Left/
Moving the mask
00013
Move
T/W Size
043
E (Effect) button : Saturation
You can change the saturation of the image.

Press the E button in an available recording mode. (p.41)
IMAGE ADJUST
Move
Saturation
E
Exit
Select Saturation ( ) menu
and a bar for changing the
saturation will be displayed.
Change the saturation by pressing
the Left/Right button.
Move
OK Set
Saturation
Bar for changing the saturation
Move
00013
Press the Shutter button to
take a picture.
<Final Image>
044
OK Set
+ direction: High saturation (The colour will be intense)
- direction: Low saturation (The colour will be subtle)
00013
Press the OK button and the
saturation icon will be displayed.
01:00 PM
2007 / 08 / 01
E (Effect) button : FUN
Cartoon
You can add a text box to the image to make the image cartoon like.
The size of Cartoon image is fixed to 1M.

Press the E button in an available mode. (p.41)
00013
FUN
Press the Fn button and
select a desired text box
position by pressing the
Left/Right button.
Cartoon
Select Cartoon (
E
Move
Exit
SH Capture
OK Set
Frame
00013
SH Capture
Select a desired frame by
pressing the Left/Right
button and press the OK
button.
).
00013
Fn Edit
Select the text box position
of the third image with the
same procedure and take
the third image.
Fn Edit
00013
Press the Shutter
button to take an
image.
SH Capture
Fn Edit
00013
SH Capture
Balloon
00013
Press the OK button and the file
is saved as a new file name.
OK Save
Fn Delete
045
E (Effect) button : FUN

Changing the cartoon image before taking the last shot
Before saving the cartoon image, you can take images again.
1. Select an image to delete by using the Left/
Left Right button.
2. Press the Fn button and the image deletes.
00013
OK Save
00013
Fn Delete
Pressing the
Fn button
SH Capture
3. To take a new image, press the Shutter button.
046
Fn Edit
E (Effect) button : FUN
Photo Frame
You can add 9 types of frame-like borders to a still image you want
to capture. Date & Time information will not be printed on the stored
image taken with Photo Frame menu.
The size of Photo Frame image is fixed to under 5M.

Press the E button in an available recording mode. (p.41)
Photo Frame
FUN
E
Move
Frame
Exit
OK Set
Pressing the
OK button .
00013
00013
Pressing the
Fn button.
SH Capture
Move
SH Capture
Fn Edit
1. The selected photo frame will be displayed by pressing Left/
Left Right
button. Press the Shutter button to take a picture.
047
E (Effect) button : FUN
Pre-set focus frame

You can make the subject stand out from its surroundings. The subject
will be sharp and in focus while making the rest out of focus.
The size of High Light image is fixed to under 5M.

Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
00013
00013
Press the E button in an available recording mode. (p.41)
FUN
High Light
Pressing the
Fn button
SH Capture
Fn Edit
SH Capture
<Point the camera towards the
subject and compose the image
by using the LCD monitor.>
E
Move
Exit
Pressing the Up/Down/
Left Right button.
Left/
00013
OK Set
Range
Move
<The range is activated: The focus
frame is changed to a solid line.>
00013
1. Select a proper menu by pressing the Left/
Left Right button and press the
OK button.
High Light
High Light
Pressing the
Fn button
High Light
High Light
SH Capture
Range
OK Set
<Range 1>
Range
OK Set
<Range 2>
Range
OK Set
Range
<Range 3>
OK Set
<Range 4>
Fn Edit
Pressing the
Shutter button.
00013
2. The preset focus frame will appear.
Press the Shutter button to capture an
image.
00013
SH Capture
048
Fn Edit
<Final image>
SH Capture
Move
<After changing the range>
E (Effect) button : FUN
Composite shooting

00013
You can combine 2 - 4 different shots in a still image.
The size of Composite image is fixed to under 5M.

Selecting 2 composite shots
00013
Pressing the
Shutter button.
Press the E button in an available recording mode. (p.41)
FUN
Composite
SH Capture
SH Capture
<Ready for taking>
Fn Delete
<First shot>
Pressing the
Shutter button.
E
Move
Composite
Exit
OK Set
00013
00013
1. Select a desired menu by pressing Left/
Left Right button and press the OK
button. (You can select 2-4 composite images)
Composite
Composite
Composite
Pressing the
OK button.
Composite
OK Save
Composite
OK Set
<Composite 1>
Composite
OK Set
<Composite 2>
Composite
OK Set
<Composite 3>
Composite
OK Set
<Composite 4>
2. After selecting a desired menu, press the Shutter button to take a
picture.
<The final picture>
Fn Delete
<Second shot>
After taking the last image, press the OK button to save the image.


You can use the Flash, Self-timer, Macro Focus and the
Zoom W/T button during the composite shooting.
If you press the Play mode, MENU, E button or Mode button
during the composite shots, each camera working mode is
executed. The previously captured images will be deleted.
049
E (Effect) button : FUN

Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite
shot.
1. During the composite shots, press the Fn button.
2. A previous image will be deleted and new frame will be displayed. To
delete a previously taken image, press the Fn button again.
00013
00013

Changing a part of composite shot after taking the last shot
After taking the last shot, you can change a part of the composite shot.
1. After taking the last shot, a cursor to select a frame will appear. Press
the Up/Down/Left/
Left Right button to select the frame.
Left/
2. Press the Fn button and an image will be deleted. The composite frame
will be activated.
3. Press the Shutter button. You can take other images again by using
the Press the Up/Down/Left/
Left Right button and Fn button.
Left/
4. Press the OK button again to save the captured image.
00013
00013
Pressing the
Up button.
Pressing the
Fn button
SH Capture
Fn Delete
<Before taking the 3rd shot>
SH Capture
Fn Delete
<Moving backward to the 2nd shot>
OK Save
Fn
Delete
OK Save
<After taking 4th shot>
00013
3. Press the Shutter button to capture a new image.
Pressing the
Shutter button.
Fn
Delete
<Moving backward to the
2nd shot>
Pressing the
Fn button.
SH Capture
<Deleting 2nd shot>
00013
00013
Pressing the
OK button.
OK Save
Fn
Delete
<Taking 2nd shot again>
050
<Final Image>
Using the LCD monitor to adjust
the camera settings
You can use the menu on the LCD monitor to set up recording
functions.

The items indicated by
Menu
Sharpness
Contrast
Sharpness
You can adjust the sharpness of the picture you are about to take. You
cannot check the sharpness effect on the LCD monitor before you
take a picture, because this function is applied only when the captured
image is stored on the memory.
are default settings.
Sub menu
Available mode
Soft+
Soft
Normal
Vivid
Vivid+
–
High
Normal
Low
–
RECORDING
Sharpness
Contrast
Focus Area
Voice Memo
Voice Record
Page
p.51
Back
p.52
Sharpness
Focus Area Center AF
Voice Memo
Off
Voice
Record
Voice Mute

Multi AF
p.52
On
[Soft+]/[Soft]
[Normal]
p.53
–
[Vivid]/[Vivid+]
Off
On
p.54
Soft+
Soft
Normal
Vivid
Vivid+
OK Set
Description
The edges of the image are softened. This effect is
suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized.
The edges will appear sharp, but noise may occur in
the recorded image.
Menus are subject to change without prior notice.
051
Contrast
You can set the difference between bright part of the image and dark
part of the image.
RECORDING
Sharpness
Contrast
Focus Area
Voice Memo
Voice Record
Back
Contrast
[High]
[Normal]
[Low]
052
Focus Area
You can select your preferred Focus Area according to the shooting
conditions.
RECORDING
Sharpness
Contrast
Focus Area
Voice Memo
Voice Record
High
Normal
Low
OK Set
Back
Description
Focus Area
The image contrast is high.
[Center AF]
The contrast is normal.
The image contrast is more subtle.
[Multi AF]

Center AF
Multi AF
OK Set
Description
The rectangular area in the center of the LCD
monitor will be focused.
This camera selects all available AF points of the
LCD monitor.
When the camera focuses on the subject, the auto focus frame turns to
green. When the camera doesn’t focus on the subject, the auto focus
frame turns to red.
Voice Memo
You can add your voice-over to a stored
still image. (Max. 10 sec.)
Voice recording
A voice can be recorded for as long as the
available recording time (Max. 10 hour)
allows.
RECORDING
Sharpness
Contrast
Focus Area
Voice Memo
Voice Record
Off
On
OK Set
Back
– If the voice memo indicator is displayed
on the LCD monitor, the setting is
completed.
00013
– Press the Shutter button and take a
picture. The picture is stored on the
memory card.
– Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the Shutter button
will stop the voice memo.
Press the Shutter button to record a voice.
– Press the Shutter button once and
voice is recorded for as long as the
available recording time (max:10 hour)
allows. The recording time will be
displayed on the LCD monitor. Voice will
still be recorded if the Shutter button is
released.
– If you wish to stop recording, press the
Shutter button again.
– File type : *.wav
01:00 PM
2007 / 08 / 01
Move
Normal
Normal
Center AF
Off
OK Set
00:01:00
00:00:00
SH
REC
MENU Exit
<Voice recording mode>
Pausing while recording a voice
Using this function, you can record your
favourite voice clips into a voice recording
file without having to create multiple voice
recording files.
00013

00:00:03
SH Stop
RECORDING
Sharpness
Contrast
Focus Area
Voice Memo
Voice Record
00:00:06
SH
Stop
REC
1. Press the Pause (
) button to pause
<Pausing the voice recording>
recording.
2. Press the Pause (
) button again to resume the recording.
3. If you wish to stop recording, press the Shutter button again.


A distance of 40cm between you and the camera (microphone)
is the best distance to record sound.
If the camera power is turned off while the voice recording is
paused, the voice recording is cancelled.
053
Recording the movie clip without voice
Sound menu
You can record the movie without voice.
In this mode, you can set up sound settings. You can use the setup menu in
all camera modes, except Voice recording mode.
Select [Voice Mute] menu in the Movie
clip mode.
( ) icon will appear on the LCD monitor.
Press the Shutter button and a movie will
record for as long as the memory capacity
allows without voice.
RECORDING
Voice Mute

Off
On
The items indicated by
Mode
Menu
are default settings.
Sub Menu
Available Mode
Page
Off
OK Set
Back
Volume
00:30:25
Low
Medium
High
Off
Start Sound
● Standby
Sound 1
Sound 2
Sound 3
Off
(SOUND)
Shutter
Sound
Sound 1
Sound 2
Sound 3
Off
Beep Sound
Sound 1
Sound 2
Sound 3
AF Sound
054
Off
On
p.55
Sound (
)
Volume
You can set select a volume of start up
sound, shutter sound, beep sound and AF
sound.
– [Volume] sub menu : [Off], [Low],
[Medium], [High]
Beep Sound
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Back
Off
Low
Medium
High
OK Set
If you set sound to ON, various sounds
will be activated for camera startup, when
buttons are pressed, so that you can be
aware of the camera operation status.
– [Beep Sound] sub menu : [Off], [Sound
1, 2, 3]
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Back
Off
Sound 1
Sound 2
Sound 3
OK Set
Start up sound
You can select the sound that is activated
whenever the camera is turned on.
– Start up sound : [Off], [Sound 1],
[Sound 2], [Sound 3]
– If the start up image is set to [Off], the
start up sound will not activate, even
though you may have set these to on.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Back
Off
Sound 1
Sound 2
Sound 3
OK Set
Shutter sound
If you set AF sound to ON, AF sound will
be activated when a subject is focused
so that you can be aware of the camera
operation status.
– [AF sound] sub menu : [Off], [On]
You can select the shutter sound.
– Shutter sound : [Off], [Sound 1],
[Sound 2], [Sound 3]
AF sound
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Back
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Back
Off
On
OK Set
Off
Sound 1
Sound 2
Sound 3
OK Set
055
Setup menu
In this mode, you can set up basic settings. You can use the setup
menu in all camera modes, except Voice recording mode.

The items indicated by
are default settings.
Menu tab Main menu
File
Language
Menu tab Main menu
Sub menu
Page
Reset
Series
World Time
p.57
World Time
056
Page
Okhotsk
Wellington, Auckland
Samoa, Midway
Honolulu, Hawaii
Alaska
LA, San Francisco
Denver, Phoenix
Chicago, Dallas
New York, Miami
ENGLISH
한국어
FRANÇAIS
Caracas, La Paz
Newfoundland
DEUTSCH
ESPAÑOL
ITALIANO
Buenos Aires
Mid-Atlantic
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
DANSK
(SETUP1)
p.57
BAHASA
(SETUP1) Date&Time
Sub menu
Guam, Sydney
LCD
POLSKI
Magyar
–
–
yy/mm/dd
Imprint
Off
dd/mm/yy
mm/dd/yy
London
Rome, Paris, Berlin
Athens, Helsinki
Moscow
Teheran
Abu Dhabi
Kabul
Tashkent
Mumbai, New Delhi
Kathmandu
Almaty
Yangon
Bankok, Jakarta
Beijing, Hong Kong
Seoul, Tokyo
Darwin, Adelaide
AF Lamp
(SETUP2)
p.58

–
Off
Date
Date&Time
–
Auto
Dark
Normal
Bright
p.58
p.58
Off
On
Off
Logo
User Image
–
Quick View
Off
0.5, 1, 3sec
p.59
Power Off
1, 3, 5, 10min
–
p.60
LCD Save
Off
On
p.60
Video Out
NTSC
PAL
p.60
Format
No
Yes
p.61
Reset
No
Yes
p.62
Start Image
p.57
Cape Verde
p.58
Menus are subject to change without prior notice.
p.59
p.59
SETUP1(
)
File name
Language
This function allows the user to select the file naming format.
There is a choice of languages that can be displayed on the LCD
monitor. Even if the battery is removed and inserted again, the
language setting will be preserved.
File name
[Reset]
[Series]
Description
After using the reset
function, the next file name
will be set from 0001 even
after formatting, deleting all
or inserting a new memory
card.
SETUP1
File
Language
Date&Time
World Time
Imprint
LCD
Back
Reset
Series
OK Set
New files are named using
numbers that follow the
previous sequence, even
when a new memory card is
used, or after formatting, or
after deleting all pictures.
– The first stored folder name is 100SSCAM, and the first file name is
SI850001.
– File names are assigned sequentially from SI850001 
SI850002  ~  SI859999.
– The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM  101SSCAM  ~  999SSCAM.
– Maximum numbers of files in a folder are 9999.
– The files used with the memory card conform to the DCF (Design rule
for Camera File systems) format. If you change the image file name, the
image may not play back.
– Language sub menu:
English, Korean, French, German,
Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch,
Danish, Swedish, Finnish, Thai, Bahasa
(Malay/Indonesian), Arabic, Czech,
Polish, Hungarian and Turkish.
SETUP1
File
Language
Date&Time
World Time
Imprint
LCD
Back
ENGLISH
한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
OK Set
Setting up the Date / Time / Date type
You can change the date and time that will be displayed on the
captured images and set up the date type.
– Date type: [yy/mm/dd], [Off],
[dd/mm/yy], [mm/dd/yy].
SETUP1
File
Language
Date&Time
World Time
Imprint
LCD
Back
2007 / 08 / 01
13:00
yy/mm/dd
OK Set
057
SETUP1((
)
World time
Imprinting the recording date
The date and time selected in the [Date&Time] serve as the date and
time of your present location. Setting [World Time] enables you to
display the local date and time on the LCD monitor when travelling
overseas.
There is an option to include DATE/TIME on still images.
– Available cities:
London, Cape Verde, Mid-Atlantic,
Buenos Aires, Newfoundland, Caracas,
La Paz, New York, Miami, Chicago,
Dallas, Denver, Phoenix, LA, San
Francisco, Alaska, Honolulu, Hawaii,
Samoa, Midway, Wellington, Auckland,
Okhotsk, Guam, Sydney, Darwin,
Adelaide, Seoul, Tokyo, Beijing, Hong
Kong, Bankok, Jakarta, Yangon, Almaty,
Kathmandu, Mumbai, New Delhi,
Tashkent, Kabul, Abu Dhabi, Teheran,
Moscow, Athens, Helsinki, Rome, Paris,
Berlin
– [DST]: Press the Up/Down button
to set up [DST]. (+) icon will
appear in front of the city name.
SETUP1
File
Language
Date&Time
World Time
Imprint
LCD
Back
Series
ENGLISH
2007/08/01
London
Off
Normal
OK Set
– Sub menus
[Off]:



Seoul, Tokyo
[GMT +09:00] 2007 / 08 / 01 13:00 PM
OK Set
DST
The DATE & TIME will
not be imprinted on the
SETUP1
File
image file.
Language
[Date]:
Only the DATE will be
Date&Time
imprinted on the image
Off
World Time
Date
Imprint
file.
Date & Time
LCD
[Date&Time] : The DATE & TIME will be
OK Set
Back
imprinted on the image
file.
The Date & Time are imprinted at the bottom right side of the still image.
The imprint function is applied only to still images except for the images
taken in photo frame effect mode.
Depending on the manufacturer and print mode, the date printed on an
image may not be printed correctly.
LCD brightness
You can adjust the LCD brightness.
– Sub menus:
[Auto], [Dark], [Normal],
[Bright]
SETUP1
File
Language
Date&Time
World Time
Imprint
LCD
Back
058
Auto
Dark
Normal
Bright
OK Set
SETUP1((
)
SETUP2(
)
Auto focus lamp
Quick view
You can turn on and off the Auto Focus lamp.
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only with still images.
– Sub menus
[Off] : The AF lamp will not light up in
low light conditions.
[On] : The AF lamp will light up in low
light conditions.
SETUP1
Language
Date&Time
World Time
Imprint
LCD
AF Lamp
Back
– Sub menus
[Off]:
Off
On
OK Set
Start up image
The quick view function
can’t be activated.
[0.5, 1, 3 sec]: The captured image is
briefly displayed during
the selected time.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
Back
Off
0.5 SEC
1 SEC
3 SEC
OK Set
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
– Sub menus : [Off], [LOGO], [User
Image]
SETUP1
Date&Time
– Use a saved image for the start-up
World Time
image with the [Start Image] in the
Imprint
[RESIZE] menu in the play mode.
LCD
AF Lamp
– The start-up image will not be deleted
Start Image
by [Delete] or [Format] menu.
Back
– The User images will be deleted by [Reset] menu.
OFF
OK Set
059
SETUP2(
2(
)
Auto power off
Selecting video out type
This function switches the camera off after a set amount of time in order
to prevent unnecessary battery drainage.
The Movie output signal from the camera can be NTSC or PAL. Your
choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only
BDGHI.
– Sub menus
[1, 3, 5, 10 min]: The power will turn off
automatically if not used
SETUP2
Quick View
for the period of time
1 min
Power Off
specified.
3 min
LCD Save
– After replacing the battery, the power off Video Out
5 min
10 min
Format
setting will be preserved.
Reset
– Note that the automatic power off
OK Set
Back
function will not operate if the camera is
in the PC/Printer mode, slide show, playing back a voice recording and
playing back a movie clip.
If you set the [LCD save] to On and the camera isn’t operated during
the specified time, the LCD monitor will be turned off automatically.
060
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor and the LCD monitor of
the camera.
SETUP2
Quick View
Power Off
LCD Save
Video
Format
Reset
Back
Off
On
OK Set
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
Back
Selecting Video
out type
LCD save
– Sub menus
[Off]:
The LCD monitor will not be
turned off.
[On]:
If the camera isn’t operated
during the specified time (about
30 SEC.), the camera power
will be idle (Camera status
lamp:Blinking) automatically.

NTSC
PAL
OK Set
Description
NTSC
U.S.A, Canada, Japan, South Korea, Taiwan,
Mexico.
PAL
Australia, Austria, Belgium, China, Denmark,
Finland, Germany, U.K., Holland, Italy, Kuwait,
Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
SETUP2(
2(
)
Formatting a memory
If you run [Format] on the memory, all files which are image, video
clip, multimedia, world tour guide and even protected images will be
deleted. So be sure to download important files to your PC before
formatting the memory.
– Sub menus
[No]:
The memory will not be
formatted.
[Yes]: A window for confirming the
selection displays. Select the
[Yes] menu. A [Processing!]
message appears and the
memory will be formatted.
If you run FORMAT in Play
mode, a [No Image!] message
will appear.
Yellow - Video
White - Sound
– When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
– There will be a digital noise on the external monitor, but it is not a
malfunction.
– If the image is not in the centre of the screen, use the TV controls to
centre it.
– When the camera is connected to an external monitor, some parts of
the image may not be displayed.
– When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as
those indicated on the LCD monitor.
– When the camera is connected to an external monitor, the button sound
may not function.
– When you connect the A/V cable in all mode, the camera mode is
changed to the Playback mode automatically and an image will be
displayed.

Be sure to run [Format] on the
following types of memory card.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
0.5 SEC
3 min
Off
NTSC
Change
Back
Formatting the memory will delete all
data on the memory (Images, MP3,
PMP, Text and World Tour Guide files)
Format?
No
Yes
– A new memory card, or an unformatted
memory card
– A memory card that has a file this camera can’t recognise or one that
has been taken from another camera.
– Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras, memory
card readers, or PCs, you will get a [Card Error!] message.
061
SETUP2(
2(
)
Starting play mode
Initialisation
All camera menu and function settings will be restored to their default
values. However, values for Date/Time, Language, and Video will not
be changed.
– Sub menus
[No]:
Settings will not be restored to
their defaults.
[Yes]: A window for confirm the
selection displays. Select the
[Yes] menu and all settings will
be restored to their defaults.
Playing back a still image
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
Back
Turn the camera on and select Play mode by pressing the Play mode
( ) button. The camera can now play back the images stored in the
memory. If the memory card is inserted in the camera, all the camera
functions apply only to the memory card. If the memory card is not
inserted in the camera, all the camera functions apply only to the
internal memory.
1. Select the Play mode by pressing the
Play mode ( ) button.
No
Yes
OK Set
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to view
by pressing the Left/
Left Right button.
 Press and hold the Left or Right
button to play back the images
quickly.
062
100-0031
Starting play mode
Playing back a movie clip
1. Select the recorded movie clip that
100-0031
you want to play back by using the
Left Right button.
Left/
2. Press the Play & Pause (
) button
to playback a movie clip file.
– To pause a movie clip file while
00:00:02
playing it back, press the Play &
E Capture
Play
Pause (
) button again.
– Pressing the Play & Pause (
)
button again will cause the movie clip
file to restart.
– To rewind the movie clip while it is
playing, press the Left button. To
fast forward the movie clip, press the
Right button.
– To stop playback of the movie clip, press the Play & Pause (
)
button, and then press the Left or Right button.
Movie clip capture function
You can capture still images from the movie clip.

How to capture the movie clip
1. Press the Play & Pause (
) button
while playing the movie clip. Then press
the E button.
2. The paused movie clip is saved in a
new file name.
 The captured movie clip file is the same
size as the original movie clip (800x592,
640x480, 320x240).
 When you press the E button at the
beginning of the movie clip, the first
frame of the movie clip will be saved as
a still image.
00:00:24
T
Trim
E Capture
<Paused>
<Press the E button>
063
Starting play mode
Playing back a recorded voice
On camera movie trimming
You can extract desired frames of movie
clip during the movie clip play back. If the
running time is under 10 seconds, the
movie clip can’t be trimmed.
1. Press the Play & Pause (
) button
at the point of the movie clip where you
want to start extracting.
2. Press the T button.
3. Press the Play & Pause (
) button
and the extracted range will be
displayed on the status bar.
4. Press the Play & Pause (
) button
once more at the point where you wish
the extracted file to stop.
5. Press the T button and a confirmation
window will be displayed.
6. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[No]:
The movie trimming will be
cancelled.
[Yes]: The extracted frames are
saved as a new file name.

064
00:00:24
T
Trim
T
Trim
E Capture
00:00:45
Trimming?
No
Yes
If you don’t specify the ending point of the movie clip, the
trimming confirmation window will be displayed at the point of
the last frame.
1. Select the recorded voice that you want
100-0031
to play back by using the Left/
Left Right
button.
2. Press the Play & Pause (
) button
to play back a recorded voice file.
– To pause a recorded voice file, while
00:02:51
playing it back, press the Play &
Play
Pause (
) button again.
– To resume playback of the voice file, press the Play & Pause
(
) button
– To rewind the voice file while it is playing, press the Left button. To
fast forward the voice file, press the Right button.
– To stop playback of the voice memo, press the Play & Pause
(
) button and then press the MENU/OK
OK button.
Starting play mode
LCD monitor Indicator
Playing back a voice memo
The LCD monitor displays shooting information about the displayed
image.
① ②
③
④
1. Select a still image that has the voice
memo.
2. Press the Play & Pause (
) button
to play back the voice memo.
– To pause the voice memo, while
playing it back, press the Play &
Pause (
) button again.
– To resume playback of the voice
memo, press the Play & Pause
(
) button.
– To stop playback of the voice memo,
press the Play & Pause (
)
button and then press the MENU/OK
button.
100-0031
100-0030
⑬
⑫
⑪
⑤
⑥
⑦
ISO 80
AV 3.5
TV
Flash
Size
Date
100-0031
1/11
Off
3264x2448
2007/08/01
⑩⑨ ⑧
00:00:06
Pause
100-0031
00:00:06
Play
No.
Description
1
Playback mode
Icon
Page
2
Memory card indicator
/
-
3
Folder name & File name
100-0010
p.57
4
Battery
5
ISO
80 ~ 1600
p.38
6
Aperture value
F3.5 ~ F8.0
p.40
7
Shutter speed
16 ~ 1/2000
p.40
8
Flash
On/Off
p.31
9
Image size
3264x2448 ~ 256X192
p.36
10
Recording date
2007/08/01
p.57
11
DPOF
12
Protect
p.84
13
Movie Clip/Voice Memo
p.23/53
p.62
p.16
p.85
065
Using the camera buttons to set the camera
In Play mode, you can use the buttons on the camera to conveniently
set up the Play mode functions.
Play mode button


Thumbnail(
) button
You can view multiple pictures, enlarge a selected picture, and
crop and save a selected area of an image.

In the MP3, PMP, Text Viewer, Movie Clip mode and when
playing back the recorded voice, you can control the volume of
multimedia files.

Thumbnail display
If you have turned on the camera by pressing the POWER
button, you can press the Play mode button once to switch to
Play mode and press it again to switch to Recording mode.
In the PMP, MP3, Text viewer mode, pressing the Play mode
button will display the play list of each mode.
) / Enlargement(

1. While an image is displayed on full screen,
press the Thumbnail button.
2. The thumbnail display will highlight the
image that had been showing at the time the
thumbnail mode was selected.
3. Press the 5 function button to move to a
desired image.
4. To view an image separately, press the enlargement button.
100-0031
Pressing the
Thumbnail (
button
Pressing the
Enlargement (
button
<Normal display mode>
100-0031
)
)
2
3
5
6
7
8
9
<Thumbnail display mode>
Highlighted image
066
1
4
Using the camera buttons to set the camera

Image enlargement
1. Select an image that you want to enlarge and
press the Enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Pressing the Thumbnail button will zoom back
to the original full sized image.
– You can tell whether the image
displayed is an enlarged view by
x 2.0
checking the image enlargement
indicator shown at the top left of the
LCD monitor. (If the image is not an
enlarged view, the indicator will not
be displayed.) You can also check
the area of enlargement.
– Movie clips and WAV files can’t be enlarged.
– If an image is enlarged, a loss of quality may occur.

The maximum enlargement rate in proportion to the image size
Image size
Maximum
enlargement rate

X12.8
X12.4
X12.8
X10.1
X8.0
X4.0
Trimming : You can extract part of the image that you want and
save it separately.
1. Select an image that you want to
enlarge and press the enlargement
x 2.0
button. Press the MENU/OK
OK button and
Trimming?
No
a message will be displayed.
Yes
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
OK Confirm
button.
– [No]: The trimming menu will disappear.
– [Yes]: The trimmed image will be saved as a new file name, and
appear on the LCD monitor.
 If there is not enough memory space to save the trimmed image, the
image can’t be trimmed.
067
Info (
) / Up button
Play & Pause (
When the menu is displayed on the LCD monitor, the UP button
operates as a direction button. When the menu is not displayed on
the LCD monitor, pressing the Info( ) button will display image
information on the LCD monitor.
100-0031
100-0031
Info (
) button
ISO
AV
TV
Flash
Size
Date
80
3.5
1/11
Off
3264x2448
2007/08/01
) / Down button
In Play mode, the play & pause (
follows:
– If the menu is displayed
Press the Down button to move from the main menu to a sub menu, or
to move down the sub menu cursor.
– If a still image with a voice memo, a voice file, or a movie clip is playing
·In Stop mode:
Plays a still image with a voice memo, a voice file,
or a movie clip.
·During playback: Temporarily stops playback.
·In Pause mode:
Resumes playback
100-0031
Info (
) button
Info (
100-0031
100-0031
) button
00:00:32
Play
<Voice recording is stopped>
068
)/ down button works as
◀
REW
Pause
00:00:05 FF ▶
OK Stop
<Voice recording is playing>
00:00:12
Play
OK Stop
<Voice recording is paused>
Left / Right / Menu / OK button
Delete ( ) button
Left Right/
Left/
Right MENU/OK
OK button activate the following.
This deletes images stored on the memory card.
– Left button:
While the menu is showing, the Left button operates as
a direction button. While the menu is not showing, press
the Left button to select the previous image.
– Right button: While the menu is showing, the Right button operates as
a direction button. While the menu is not showing, press
the Right button to select the next image.
– MENU button: When you press the MENU button, the play mode menu
will be displayed on the LCD monitor. Pressing it again
will return the LCD to the initial display.
– OK button:
When the menu is displayed on the LCD monitor, the
OK button is used for confirming data that is changed by
using the 5 function button.
Print (
) button
When the camera is connected to a PictBridge printer, you can print
images by pressing the Print button.
100-0031
Print
1. Select an image that you want to delete by pressing the Left/
Left Right
button and press the Delete ( ) button.
100-0031
100-0031
Delete image?
1
Delete
image?2
No
No
Yes
Yes
4
7
T
Select
OK Confirm
<Single Image>
3
5
6
8
9
OK Confirm
<Thumbnail Image>
2. To add images to delete, press the T
button.
– Left/
Left Right button:Selects images
– T button: Checks for deletion
– OK button: Deletes the selection
100-0031
Prev ◀
T
Select
▶ Next
OK Delete
3. Select the submenu values by pressing the Up/Down button and then
press the OK button.
– If [No] is selected: Cancels “Delete Image”.
– If [Yes] is selected: Deletes the selected images.
OK Menu
069
E (Effect) button : Resize
Change the resolution (size) of pictures taken. Select [Start image] to
save an image to be the start-up image.
– Only JPEG images can be resized. Movie clip (AVI), Voice recording
(WAV) files can’t be resized.
1. Press the Play mode button and press
the E button.
2. Press the Left/
Left Right button and select
the [RESIZE] ( ) menu tab.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.

RESIZE
3M
1M
Start image
MP3 Skin












1M
5MP
070
Exit
( : Selectable)
3M
6MW
E
Move
5M
5M
7MP
– You can change the resolution of only those files compressed in the
JPEG 4:2:2 format.
– The resized image will have a new file name. The [Start Image] image
is stored not on the memory card but on the internal memory.
Image Resize Types
8M

3MP
– A large sized image can be resized to a smaller sized image, but not
vice versa.
1MP


2MW
1MW




Start image
MP3 Skin
Start image
MP3 Skin
– If a new user image is saved, one of the two user images will be deleted
in order.
– If the memory capacity is insufficient to store the resized image, a
[Memory Full!] message will appear on the LCD monitor and the
resized image can’t be stored.
E (Effect) button : Rotating an image
E (Effect) button : Colour
You can rotate the stored images by various degrees.
Once the playback of the rotated picture is finished, it will switch back
to the original state.
It is possible to add colour effects to your images by using this button.
1. Press the Play mode button and press
the E button.
2. Press the Left/
Left Right button and select
the [ROTATE] ( ) menu tab.
3. Select a desired sub menu by pressing
the Up/ Down button.
2. Select (
) menu tab by pressing the
Left Right button.
Left/
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
ROTATE
E
Move
Right 90°
E
Back
OK Set
< : Right 90˚>:
Rotate picture in a clockwise direction
E
Back
Exit
180°
Left 90°
OK Set
< : Left 90˚>:
Rotate picture in a
counterclock-wise direction
E
Back
OK Set
< : 180˚>:
Rotate picture 180 degrees
Icon
Effect Mode
COLOR
Move
E
Exit
Description
[B/W]
Captured images will be stored in black and
white.
[Sepia]
Captured images will be stored in a sepia tone (a
gradient of yellowish brown colours).
[Red]
[Green]
[Blue]
[Negative]
Vertical
Horizontal
1 Press the Play mode button and press
the E button.
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Save the image in negative mode.
[Custom Color] Captured images will be stored in set RGB tone.
E
Back
OK Set
< : Horizontal>:
Rotate picture horizontally

E
Back
OK Set
4. The changed image is saved as a new file name.
< : Vertical>:
Rotate picture vertically
If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
071
E (Effect) button : Colour

E (Effect) button : Special colour
1. Press the Play mode button and press the E button.
Custom colour
You can change the R (Red), G (Green)
and B (Blue) values of the image.
2. Select (
Custom Color
) menu tab by pressing the Left/
Left Right button.
Colour Filter
With this menu, you can change the colour information of the image
(excluding Red, Blue, Green and Yellow) to Black and White.
Move
– OK button: Selects / setups the Custom
Colour
– Up/Down button : Selects R, G, B
– Left/
Left Right button : Changes the values
OK
Set
Custom Color
Move
1. Select (
) by pressing the Up/Down button.
SPECIAL COLOR
OK Set
Move
Color Filter
E
Exit
E
Back
OK Set
2. Press the OK button and the image is saved as a new file name.
072
E (Effect) button : Special colour
Colour mask
With this menu, you can select a part you want to highlight. The rest of the image will be in black and white.
Color Mask
Press the OK button and you
can set the size and location of
the part.
Select (
) and a mark for
selecting part will display.
E
Move
Exit
E
Back
OK Set
◀ ▶
SPECIAL COLOR
OK Set
◀ ▶
Move
T/W Size
W/T
W/
/T button : Changing size of part
100-0010
◀ ▶
OK Set
◀ ▶
Pressing the OK button and the
colour mask image will be saved as
a new file name.
Pressing the
OK button.
E
Back
Move
T/W Size
Up/Down/Left/
Left Right button:
Left/
Changing the location
OK Set
<Final image>
◀ ▶
OK Set
◀ ▶
Move
T/W Size
073
E (Effect) button : Image editing
Contrast control
1. Press the Play button and press the E button.
2. Select (
) menu tab by pressing the Left/
Left Right button.
You can change the contrast of the image.
1. Select ( ) by pressing the Up/Down
button and a bar for selecting the
contrast will be displayed.
2. Change the contrast by pressing the
Left Right button.
Left/
3. Press the OK button and the image will
be saved as a new file name.
Red eye removal
Red eye effect can be removed from the
captured image.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2 The [Processing!] message displays
and the image is saved as a new file
name.
Red Eye Fix
E
Back
OK Set
Brightness control
You can change the brightness of the
image.
Brightness
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
brightness will be displayed.
2. Change the brightness by pressing the
◀▶
Move
OK Set
Left Right button.
Left/
3. Press the OK button and the image will be saved as a new file name.
074
Contrast
◀▶
Move
OK Set
Saturation control
You can change the saturation of the image.
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
saturation will be displayed.
2. Change the saturation by pressing the
Left Right button.
Left/
3. Press the OK button and the image will
be saved as a new file name.
Saturation
◀▶
Move
OK Set
Noise effect
You can add noise to an image to add a
more classic feel to your photo.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2. The [Processing!] message appears
and the image is saved as a new file
name.
Add Noise
E
Back
OK Set
E (Effect) button : FUN
Cartoon
You can add a text box to the image to make the image cartoon like.
The cartoon image is saved as 1M image size.
FUN
Cartoon
Select Cartoon
(
).
E
Move
Select a desired
frame by pressing
the Left/
Left Right button
and then press the
OK button.
Exit
Frame
OK Set
Select a desired position
by pressing the Up/
Down/Left/
Left Right button
Left/
and press the OK button.
◀ ▶

◀ ▶
Move
OK Set
◀▶
Move
OK Set
100-0006
OK
Select
1
2
3
4
5
6
E
Press the OK button
and the image is saved.
Press the OK button
again to open a new
image to save.
Back
Change the location
of the text box by
pressing the Left/
Left
Right button.
◀▶
OK
Move
OK Set
100-0010
Select an image by pressing
the Up/Down/Left/
Left Right
Left/
button and press the OK
button. Select the third image
with the same procedure.
Press the OK button
and the file is saved
as a new file name.
◀ ▶
Select the position
of image and text
box with the same
procedure.
◀ ▶
Move
OK Set
OK Save
Fn
Delete
075
E (Effect) button : FUN

Before saving the cartoon image, you can change the selected
image.
Changing the cartoon image before taking the last shot
1. Pressing the Fn button deletes the images in order.
2. Press the OK button and you can select images.
Photo Frame
You can add 9 types of frame-like borders to a still image you want
to capture. Date & Time information will not be printed on the stored
image taken with Photo Frame menu.
The Photo Frame image is saved as under 5M image size.
Photo Frame
FUN
Pressing the Fn button
OK Save
Fn
Delete
OK Search
Fn
Delete
Move
3. After selecting desired images, press the OK button to save the image
as a new file name.
076
E
Exit
◀▶
Frame
OK Set
Select a desired sub menu by pressing the Up/Down/Left/
Left Right button.
Left/
– Press the E button and the frame will be canceled.
E (Effect) button : FUN
Preset focus frames
You can make the subject stand out from its surroundings. The subject
will be sharp and in focus while making the rest out of focus.The High
Light image is saved as under 5M image size.
High Light
FUN
E Exit
Move
Range
OK Set
Select a desired frame by pressing the Left/
Left Right button and press the
OK button.
High Light
Range
High Light
OK
Set
<Range 1>
Press the OK button and the image is
saved.
Range
OK
Set
<Range 2>
100-0010
High Light
Range
High Light
OK
Set
<Range 3>
Range
OK
Set
<Range 4>
077
E (Effect) button : FUN

Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
1. Select a focus frame by pressing the Left/
Left Right button and press the
OK button.
2. Move the location of the frame by pressing the Up/Down/Left/
Left Right
Left/
button.
3. Press the OK button and the file is saved as a new file name.
Composite image
You can combine 2 - 4 different shots in a still image.
FUN
Composite
E
Move
Exit
Composite
OK Set
High Light
◀ ▶
Pressing the
OK button
OK Set
Range
◀ ▶
Move
Press the OK button.
(You can select 2-4
composite images)
OK Save
<The frame is activated>
◀ ▶
Pressing Up/
Down/Left/
Left Right
Left/
button
◀ ▶
Move
OK Set
100-0010
Pressing the
OK button

◀ ▶

◀ ▶
Move
OK Save
<After changing the frame position>
078

If you press the Shutter and Play mode button, a capture
mode is executed.
The composite image is saved as according to the minimum
image size among the original images.
8M image is saved as 5M image size.
E (Effect) button : FUN
Selecting 2 composite shots

Pressing the
Up/Down/Left/
Left
Left/
Right button.
◀ ▶
Move
OK Set
Before selecting the last composite image, you can change a
part of composite image.
1. During the composite image editing, press the Fn button.
2. A previous image will be deleted. Press the OK button and you can
select a new image. After selecting an image, press the Fn button again
and the image will be deleted again.
◀ ▶
◀ ▶

◀ ▶
Move
OK Set
<Changing the position>
Pressing the
OK button.
Pressing the
Fn button.
100-0006
OK Search
OK
Select
1
2
3
4
5
6
E
Pressing the
OK button.
Delete
OK Search
Fn
Delete
3. Press the OK button and you can select an image again.
OK Search
Back
Fn
Fn Delete
<Selecting the second image>
Select an image by pressing
the 5 function button and press
the OK button.
Change the location of second
image by pressing the Up/Down/
Left Right button button and
Left/
press the OK button to save the
image.
OK Save
Fn Delete
079
E (Effect) button : FUN
Setting up the play back function
using the LCD monitor
Sticker
Play mode functions can be changed by using the LCD monitor.
In the Play mode, pressing the MENU button displays the menu on the
LCD monitor. The menus you can set up in Play mode are as follows.
To capture an image after setting up the play menu, press the Play
mode button or Shutter button.
You can add various stickers to the image.
The Sticker image is saved as 1M image size.
Sticker
FUN
Select (
E
Move
).
Menu Tab Main Menu
Show Start
Exit
◀▶
Sticker
OK Set
Select a desired sticker
by pressing the Left/
Left
Right button and press
the OK button.
Images
SLIDE
SHOW
(
)
Interval
Select a location
of sticker by
pressing the Up/
Down/Left/
Left Right
Left/
button.
Music
Voice Memo
Move
100-0010
Fn
Protect
OK Save
Add
◀ ▶
◀ ▶
OK Save
◀ ▶
◀ ▶

Effect
Move
Fn
You can add additional stickers
(Max. 2 stickers) by pressing the
Fn button. Press the OK button to
store the image.
Add
PLAY
BACK
(
)
Delete
DPOF
Copy To
Card
080
Sub Menu
Sub Menu
Page
Play / Repeat Play
–
p.82
All
p.82
Date
–
Select
Off
Basic
Classic
p.83
Memories
Rhythmic
Delight
1, 3, 5, 10 sec
–
p.83
Off / Music 1, 2, 3/
–
p.83
My Music
Off
–
p.84
On
–
Select
Unlock / Lock
p.84
All
Select
–
p.84
All
No / Yes
Select / All Pics /
Standard
Cancel
Index
No / Yes
p.85-87
Select / All Pics /
Size
Cancel
No
–
p.87
Yes
–
Setting up the play back function using the LCD monitor
This menu is available while the camera is connected to a PictBridge
supporting printer (direct connection to the camera, sold separately)
with a USB cable.
Menu Tab Main Menu
Images
Size
Layout
Sub Menu
Sub Menu
One Pic
–
All Pics
–
Auto
–
PostCard
Page
Menu Tab Main Menu
p.89
Sub Menu
Sub Menu
Auto
-
Plain
-
Photo
-
–
FastPhoto
-
Card
–
Auto
-
4X6
–
Draft
-
Normal
-
Fine
-
Auto
-
L
–
2L
–
Letter
–
A4
–
A3
–
Auto
–
Full
–
1
–
2
–
4
–
8
–
9
–
16
–
Index
–
Type
Quality
Date
p.90
File Name
Reset

Off
-
On
-
Auto
-
Off
-
On
-
No
-
Yes
-
Page
p.90
Menus are subject to change without prior notice.
081
Starting the slide show (
)
Images can be displayed continuously at pre-set intervals. You can
view the slide show by connecting the camera to an external monitor.
1. Press the Play mode button and press the MENU button.
2. Press the Left/
Left Right button and select the [SLIDE SHOW] menu tab.
Start the slide show
The slide show can start only in the [Show Start] menu.
1. Use the Up/Down button to select the
[Show Start] menu and press the Right SLIDE SHOW
Show Start
Play
button.
Image
Repeat Play
2. Select a desired sub menu by pressing Effect
Interval
the Up/Down button.
Music
[Play]: The slide show is closed after
one cycle.
OK Set
Back
[Repeat Play]:The slide show is
repeated until cancelled.
3. Press the OK button and the slideshow will be started.
– To pause the slide shown while playing it back, press the Play &
Pause (
) button again.
– Pressing the Play & Pause (
) button again will cause the slide
show restart.
– To stop playback of the slide show, press the Play & Pause (
)
button, and then press the OK/
OK MENU button.
082
Selecting Images
You can select image to view.
1 Use the Up/Down button to select the
[Image] menu and press the Right
SLIDE SHOW
button.
Show Start
Image
2. Select a desired sub menu by pressing Effect
the Up/Down button.
Interval
Music
[All]:
All images saved in the
Memory are played back.
Back
[Date]: Images taken in a specified
date are played back.
[Select]: You can select desired images to play back.
3. Press the OK button and the settings are saved.
All
Date
Select
OK Set
Starting the slide show (
)
Configure slide show effects
Unique screen effects can be used for the
slide show.
SLIDE SHOW
Show Start
2. Use the Up/Down button to select the
desired interval.
3. Press the OK button to save the
configuration.
Off
1. Select the [Effect] sub menu by pressing Image
Basic
Classic
Effect
the Up/Down button and press the
Memories
Interval
Right button.
Rhythmic
Music
Delight
2. Use the Up/Down button to select the
OK Set
Back
type of effect.
3. Press the OK button to confirm the setting.
– When the effect is selected, the background music is changed
according to the default setting of the effect.
Effect
Description
[Off], [Basic]




1 Sec
3 Sec
The loading time depends on the
5 Sec
10 Sec
image size and quality.
OK Set
Back
While the slide show is playing,
only the first frame of a movie
file is displayed.
While the slide show is playing, the voice recording file will not
display.
[Interval] is available when the effect is set to [Off], [Basic],
[Classic] in the slide show. It is unavailable when the effect is set to
[Memories], [Rhythmic], [Delight] in the slide show.
No background music.
[Classic]
Background music is set to [Music 3].
[Memories]
Background music is set to [Music 1].
Setting Background Music
[Rhythmic]
Background music is set to [Music 1].
Set the slide show music.
[Delight]
Background music is set to [Music 2].

SLIDE SHOW
Show Start
Image
Effect
Interval
Music
You can change the desired music for each effect.
Setting play interval
Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the Up/Down button and
press the Right button.
SLIDE SHOW
1. Select the [Music] sub menu by
Show Start
pressing the Up/Down button and press Image
Effect
the Right button.
Interval
2. Use the Up/Down button to select the
Music
desired Music.
OK
Back
3. Press the OK button to save the
configuration.
[Off]: Background music is not played back.
[Music 1, 2, 3], [My Music]: Selected music is played back.
Off
Music 1
Music 2
Music 3
My Music
Set
083
Playback (
)
Voice memo
You can add your voice to a stored still image.
PLAYBACK
Voice Memo
Off
Protect
On
Delete
DPOF
Copy To Card
00:00:00
Back
OK Set
<Voice memo menu>
00:00:06
SH Start
SH Stop
<Ready for recording>
<Voice is recording>
– Press the Shutter button to take a picture. The images are saved
on the memory. After saving the image, the voice is recording for 10
seconds.
– To stop the recording, press the Shutter button.
Protecting images
This is used to protect specific shots
from being accidentally erased (Lock). It
also unprotects images that have been
previously protected (Unlock).
1. Press the Up/Down button and select
the [Protect] menu tab. And then press
the Right button.
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[Select]: Selection window for an image
to be protected / released is
displayed.
084
Select
All
OK Set
100-0010
100-0031
1
2
3
4
5
6
T/W Unlock
OK
Set
Protect All?
Unlock
Lock
OK
Confirm
Deleting images
PLAYBACK
Voice Memo
Protect
Delete
DPOF
Copy To Card
Back
– Up/Down/Left/
Left Right : Select an
Left/
image.
– Zoom W/
W/T
/T Button: Protect / release the
image.
– OK button: Your changes will be
saved and the menu will
disappear.
[All]: Protect / release all saved images.
– If you protect an image, the protect
icon will be displayed on the LCD
monitor. (An unprotected image has
no indicator)
– An image in Lock mode will be
protected from the delete function or
[Delete] functions, but will NOT be
protected from the [Format] function.
This deletes images stored on the memory card.
1 Press the Up/Down button and select
the [Delete] menu tab. And then press
PLAYBACK
the Right button.
Voice Memo
Protect
2. Select a desired sub menu by pressing Delete
the Up/Down button and press the OK DPOF
Copy To Card
button.
[Select]: Selection window for an image
OK
Back
to delete is displayed.
– Up/Down/Left/
Left Right : Select an image.
Left/
– Zoom T button : Select the image for deletion. (V mark)
Select
All
Set
Playback (
)
– OK button: Press the OK button to
display the confirmation
message. Select the [Yes]
menu and press the OK
button to delete marked
images.
[All]: Displays confirmation window.
Select the [Yes] menu and
press the OK button to delete
all unprotected images. If there
are no protected images, all the
images are deleted and a [No
Image!] message will display.
3. After deletion, the screen will be
changed to the play mode screen.

DPOF
100-0031
T
1
2
3
4
5
6
Select
OK
Delete
Delete All?
No
Yes
OK Confirm

DPOF(Digital Print Order Format) allows you to embed printing
information on your memory card’s MISC folder. Select the pictures to
be printed and how many prints to make.

The DPOF indicator will display on the LCD monitor when an image
that has DPOF information plays back. Images can then be printed on
DPOF printers, or at an increasing number of photo labs.

This function is not available for movie clips and voice recording files.

When the wide angle image is printed as a wide angle print, 8% of the
left and right side of the image may not be printed. Check that your
printer can support the wide angle image when you print the image.
When you print the image at a photo lab, request that the image is
printed as a wide angle image. (Some photo labs may not support the
wide angle size print.)
Of all the files stored in the memory card, the unprotected files
in the DCIM subfolder will be deleted. Remember that this
will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place.
The startup image is stored in the camera’s internal memory
(i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
085
Playback (

)
Standard

This function allows you to embed printing quantity information on a
stored image.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
the Right button.
2. Press the Right button again and
[Standard] sub menu will display.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[Select]: Selection window for an image
to print is displayed.
– Up/Down/Left/
Left Right button: Select
Left/
an image to print.
– Zoom W/
W/T
/T button: Select the number
of prints.
[All] : Configure number of prints for all
pictures except movie and voice
files.
– Zoom W
W//T
/T button: Select a number
of prints.
[Cancel]: Cancel the print setup.
Select
All
Cancel
Standard
Index
Size
OK Set
Back
100-0031
1
2
4
W
◀
3
5
0 Images
6
▶
T
OK Set
W
◀
0 Images
▶
T
OK Set
4. Press the OK button to confirm the setting. If an image carries DPOF
instructions, the DPOF ( ) indicator will show.
086
Index
Images (except for movie clips and voice file) are printed as index type.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
Standard
the Right button.
Index
2. Press the Right button again and [Index] Size
sub menu will be displayed.
3. Select a desired sub menu by pressing
OK Set
Back
the Up/Down button.
If [No] is selected: Cancel the index print setting.
If [Yes] is selected: The image will be printed in index format.
4. Press the OK button to confirm the setting.
No
Yes
Playback (

)
Print size
You can specify the print size when printing images stored on the memory
card. The [Size] menu is available only for DPOF 1.1 compatible printers.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
Select
Standard
the Right button.
All
Index
2. Press the Right button again and select Size
Cancel
the [Size] sub menu will be displayed.
3. Select a desired sub menu by pressing
OK Set
Back
the Up/Down button and press the OK
button.
100-0031
[Select]: Selection window for an image
to be changed printed size is
1
2
3
displayed.
– Up/Down/Left/
Left Right button: Select
Left/
4
5
6
an image.
Cancel
▶ T
W ◀
– Zoom W/
W/T
/T button: Change the print
OK Set
size.
– OK button : Your changes will be
saved and the menu will disappear.
[All]: Change print size of all saved images.
Cancel
▶ T
W ◀
– Zoom W
W//T
/T button: Select a print
size.
– OK button: Confirm the changed
OK Set
setting.
[Cancel]: Cancel all of the print size settings.
 DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10

Depending on the manufacturer and print model, cancelling the
printing may take a little longer for the printer to process.
Copy To Card
This enables you to copy image files, movie clips and voice recording
files to the memory card.
1. Select the [Copy To Card] menu tab by
pressing the Up/Down button. And then PLAYBACK
Voice Memo
press the Right button.
Protect
2. Select a desired sub menu by pressing Delete
the Up/Down button and press the OK DPOF
No
Copy To Card
button.
Yes
– [No] : Cancels [Copy to Card].
OK Set
Back
– [Yes] : All images, movie clips and
voice recording files saved in the internal memory are copied
to the memory card after the [Processing!] message is
displayed. After copying has been completed, the screen will
return to play mode.
087
Playback (



088
)
When this menu is selected without inserting a memory
card, the [No Card!] message will be displayed.
If there is not enough space available in the memory card
to copy saved images in the internal memory (190MB), the
[Copy To Card] command will copy only some of the images
and display [Memory Full!] message. Then the system will
return to the Playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the
memory card into the camera.
When you move the images that are stored in the internal
memory by doing [Copy To Card] to the card, the next
number of file names will be created in the card to avoid
duplication of the file name.
– When the [Reset] of the [File] setup menu is set : The
copied file names start from after the last stored file
name.
– When the [Series] of the [File] setup menu is set : The
copied file names start from after the last captured file
name. After completing [Copy To Card], the last stored
image of the last copied folder is displayed on the LCD
monitor.
PictBridge
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice files cannot be printed.

Setting up the camera for connection to the printer
1. Connect the camera and printer with
USB cable.
2. Select the [Printer] menu by pressing
Up/Down button and press the OK
button.
Select USB
Computer
Printer
OK Confirm
■ Connecting the Camera to a Printer
PictBridge

If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge
compatible printer to the camera through USB cable with [Connecting
Computer] message. In this case, remove the cable and do the step 1 and
2 again.
Easy printing
When you connect the camera to printer in
the Play back mode, you can print a picture
easily.
– Pressing the Left/
Left Right button :
Selects a previous / next image.
– Pressing the Print ( ) button :
Currently displayed image will be printed
with the printer’s default setting.
100-0031
You can select images you want to print.

Setting the Number of Copies to Print
1. Press the MENU button and the
PICTBRIDGE
PictBridge menu will be displayed.
Images
▶
One Pic
Size
▶
All Pics
2. Use the Up/Down button to select the
Layout
▶
[Images] menu and press the Right
Type
▶
Quality
▶
button.
Date
▶
3. Use the Up/Down button to select a
Move
Print
desired sub menu and press the OK
button.
– Select [One Pic] or [All Pics]. A screen where you can set the
number of copies to print will appear as shown below.
◀▶

PictBridge : Picture Selection
Print
OK Menu
▲
▲
000
000
▼
▼
Prev ◀ ▶ Next
SH Exit
OK Set
<When [One Pic] is selected>
SH Exit
OK Set
<When [All Pics] is selected>
– Press the Up/Down button to select the number of prints.
– When [One Pic] is selected : Use the Left/
Left Right button to select
another picture. After selecting another picture, select the number of
prints for another picture.
– After setting the number of prints, press the OK button to save.
– Press the Shutter button to return to the menu without setting the
number of prints.
4. Press the Print (
) button and images will be printed.
089
PictBridge : Print Setting
PictBridge : Reset
You can select the Paper Size, Print Format, Paper Type, Print Quality,
Date Print, and File Name Print menus for printed pictures.
Initialises user-changed configurations.
1. Press the MENU button and the
PictBridge menu will be displayed.
2. Use the Up/Down button to select the
desired menu, and then press the Right
button.
PICTBRIDGE
Images
Size
Layout
Type
Quality
Date
◀
▶
▶
▶
▶
▶
▶
Back
3. Use the Up/Down button to select the
desired sub menu value, and then press the OK button.
OK Set
Menu
Function
Sub menu
Size
Set the size of the printing
paper.
Auto, PostCard, Card, 4X6,
L, 2L, Letter, A4, A3
Layout
Set the number of pictures
to be printed on a sheet of
paper.
Auto, Full, 1, 2, 4, 8, 9, 16,
Index
Type
Set the quality of the
printing paper.
Auto, Plain, Photo,
FastPhoto
Quality
Set the quality of the
picture to be printed.
Auto, Draft, Normal, Fine
Set whether to print the
date.
Auto, Off, On
Set whether to print the file
name.
Auto, Off, On
Date
File Name

Auto
Post Card
Card
4x6
L
2L
Some menu options are not supported on all printers. If not supported, the
menus are still displayed in the LCD, but are not selectable.
090
1. Use the Up/Down button to select the
PICTBRIDGE
[Reset] menu tab. And then press the
Layout
▶ Auto
Right button.
Reset?
Type
▶ Auto
No
Quality
▶ Auto
2. Use the Up/Down button to select the
Yes
Date
▶ Auto
▶ Auto
desired sub menu value, and then press File Name
Reset
▶
the OK button.
◀
Back
OK Set
If [Yes] is selected: All print and image
settings will be reset.
If [No] is selected: Settings will not be reset.
 Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came
with your printer.
MP3 / PMP / TEXT VIEWER mode


This camera has an embedded MP3, TEXT VIEWER & Portable Media
Player program. You can take a picture, listen to the MP3 files and watch
the movie clip (Movie and Video clip) whenever you want. To use the PMP
mode, you must convert the multimedia file with the Samsung Converter.
In the TEXT VIEWER mode you can see the text on the LCD monitor with
listening MP3 music.
If the file or folder name is over 120 (Including 1 Byte/2 Byte language,
Korean, Chinese, etc.) characters, the file or folder name doesn’t appear
on the play list.
Downloading files
To use MP3, PMP and TEXT VIEWER functions, MP3, PMP
(multimedia files) and TEXT files must be saved in the internal memory
or memory card of this camera.
1. Save the desired files on your PC.
2. Connect the camera to your PC with the USB cable and turn on the
camera.
3. Open Window’s EXPLORER and search for Removable Disk.
4. Make a folder under the Removable Disk.
MP3 Mode : [MP3]
PMP Mode : [PMP]
TEXT VIEWER mode :
[TEXT]
5. Select files that you want to save and copy them to the desired folder.
091
Starting the MP3 / PMP / TEXT VIEWER mode





Take care of the illegal duplication of MP3 & multimedia files. It
violates various copyright laws.
This camera can only play back MP3 files in the MP3 mode
and SDC files (modified XviD MPEG4 video / MPEG Layer2
audio type) in the PMP mode.
If a file can not be played back on this camera, convert it into
the supported file format by using the Samsung Converter.
(p.121~122)
Up to 200 files and 100 sub folders can be saved in a folder.
You can create new folders up to a depth under ‘MP3, PMP
and Text’ folders. Otherwise any files in other folders that you
create cannot be played back.
Insert the memory card that holds MP3, PMP and TEXT files. As this
camera has a 190MB internal memory, you can save the files on the
internal memory too.
1. Select a desired Multi media mode. (p.93)
2. A menu will display as shown.
SHOOTING
[Resume]:
Memorizes the latest
stopped frame.
MULTIMEDIA
MP3 mode: Plays back from the
beginning of the file.
MP3
PMP mode: Plays back from the latest
stopped frame.
SCENE
TEXT VIEWER mode: Plays back from the
latest stopped frame.
[Open]: The browsing menu will be displayed to select a desired file.
PMP
TOUR GUIDE
3. Select a desired file and press the OK
button. And then the file will play back.
Resume
Open
OK Confirm
092
Starting the MP3 / PMP / TEXT VIEWER mode
<MP3 mode>

03-Audio Track 03.mp3

01-Audio Track 01.mp3

Move

OK Select

<PMP mode>

SDC]-move sample.sdc
Move
Who bent my camera?
OK Select

<TEXT VIEWER mode>
TEST.TXT
TEST.TXT
Thank you for buying a Samsung Camera.
This manual will guide you through using the

camera, includin capturing images, downloading
images and using the application software.
Please read this manual carefully before using your
Move
OK Select

new camera.

When the [Resume] menu (p.98) of each mode are set as [Off], the
browsing menu doesn’t open. If the last played file was deleted, the
browsing menu opens though the setting is the same as above.
The order of play lists on the browsing menu and the order of files
saved in the memory are the same.
A title coded with unsupported language is displayed as “--------”.
The automatic power off function will not operate if a file is playing
back.
If there are over 100 files in the memory, it takes a little longer for
the camera to process to the MP3 / PMP mode.
If there is no operation during the specified time (About 30 sec.) in
the MP3 / TEXT VIEWER mode (B.G.M : Off, Auto scroll : Off), the
LCD monitor is turned off automatically and the camera status lamp
blinks. To use the camera, press any of the camera buttons except
the POWER button.
Playing back the VBR (Variable Bit Rate) file. A VBR file varies
the amount of output data in each time segment based on the
complexity of the input the data in that segment. When the VBR
encoded files are played back, the LCD will appear as shown.
– The VBR icon will be displayed instead of the Bit rate icon.
– Playing time will display but the whole running time doesn’t display.
For about 2 seconds of the start and end frames of the PMP file, no
camera button except the POWER button can be operated.
When an MP3 file doesn’t play back correctly, download a free MP3
conversion program and convert it before using the MP3 file on the
camera.
Depending on the file type, the movie may be paused during playing
back in the PMP mode. The movie restarts automatically and it is
not a camera malfunction.
093
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode
The LCD monitor displays information about the MP3, multimedia and
Text file.
MP3 mode
Battery (p.16)
Playing time
Lock (p.96)
Mute (p.95)
TEXT VIEWER mode
Battery (p.16)
Bit rate (p.93)
Playback mode (p.98)
<TEXT VIEWER mode>
<MP3 mode>
Title of file
Time line
Status bar
Volume (p.95)

Who bent my camera?
<PMP mode>
094
Caption (p.121)
using the application software.
new camera.

Play & Pause/
Seeking button (p.95)
including capturing images, downloading images and
Please read this manual carefully before using your
Volume (p.95)
Search speed
Equalizer (p.96)
Mute (p.95)
Encoding Type
(ANSI, Uni)
Volume Indication
(p.95)
This manual will guide you through using the camera,
TEXT Contents
PMP mode
Battery (p.16)
Lock (p.96)
TEST.TXT
Thank you for buying a Samsung Camera.
Equalizer (p.96)
Title of file
Play & Pause /
Control button (p.95)
Current page/Whole page
Indication of present TEXT
Encoding Type : ANSI (American National Standards Institute) Type,
Uni (Unicode) Type
– When the ANSI encoding type is displayed:
You should set the Language of the TEXT VIEWER menu to view the
text. Set the Language menu as one that is the same as the Operating
System language that the text was created.
– When the UNI encoding type is displayed:
The text file will be displayed with any language menu.
If the text file size is over 10MB, it may take a long time or even be
impossible to view the text file. In this case, please divide the text file.
Using the camera buttons to adjust the camera
Volume button
Delete button
You can control the volume with this
button. There are 0 ~ 30 steps.
This deletes files stored on the memory.
– Mute (
): You can mute the MP3
sound with the Up button.
Play & Pause / Seeking button




When a file is playing back, press the Down button to pause the file.
Pressing it again will resume playback.
MP3 mode
When an MP3 file is not played back, you can search the MP3 files by
pressing the Left/
Left Right button.
PMP mode
You can search the Multimedia files by pressing the Left/
Left Right button.
You can search a desired frame of the file during play back by pressing
the Left/
Left Right button.
TEXT VIEWER mode
When the text list menu is displayed : select a text file by pressing the
Up/Down button.
When the text is displayed : press the Up/Down button and previous
/ next page of the file will be displayed. Press and hold the Up/Down
button and it will skip 10 pages at a time.
1. Select a desired file to delete on the
browsing menu and press the Delete
button.
2. A message will appear as shown
[No]:
Cancels “Delete files” and the
browsing menu will display.
[Yes]: Deletes the selected file.
Delete?
No
Yes
OK

Confirm
Before deleting files from the camera, take care to download
files you want to keep to your computer.
095
Using the camera buttons to adjust the camera
Hold / Equalizer button

If you press the Hold button for over 1 second, the camera buttons are
locked.
– If the camera buttons are locked, the
buttons can’t be operated while playing
back. But Power off, Video out, USB
connection and LCD on functions can
be operated.
Playlist button
While a multimedia file is playing back, you can select a desired file by
using the browsing menu.
1. While a multimedia file is playing back, press the Playlist (
) button.
2. A playlist that is currently playing will be highlighted.
3. Move the cursor to a desired list by pressing the Control button.
Pressing the OK button : the selected file is played back. Pressing the
Playlist (
) button : the selection will be cancelled.
03-Audio Track 03.mp3
[SDC]-move sample.sdc
TEST.TXT
01-Audio Track 01.mp3
Move
OK Select
<MP3 Mode>
– If you press the Lock button again or turn off the camera, the camera is
unlocked.

The user can select appropriate sound with this setting.
– Press the E button and select either
<SRS>, <Normal>, <Live>, <Classic>,
<Jazz>, <Rock> or <Dance>.
096
Move
OK Select
<PMP Mode>
Move
OK Select
<TEXT VIEWER Mode>
Setting up the playback function using the LCD monitor
MP3 / PMP / Text Viewer mode functions can be changed by using the
LCD monitor. Press the MENU button and the menu will be displayed
on the LCD monitor.
Menu tab Main menu
MP3
Off
Play All
Repeat One
Play Mode
Repeat All
Random
MP3 Skin
Delete All
Resume
Seeking
Menu
Main menu
tab
Page
On
Slide Show
PMP
Sub menu
Resume
p.98
Resume
p.98
Random Repeat
–
Default 1
Default 2
User Skin 1
User Skin 2
Show Play
Play/Repeat Play
Show Interval
2, 3, 5 sec
No
Yes
p.99
On
Off
p.98
Normal
30 sec
1 min
3 min
5 min
10 min
Player
Display
5sec
Off
On
–
Delete All
No
Yes
Auto Scroll
MP3 BGM
p.99
TEXT
VIEWER
On
Off
0.8 sec
1.1 sec
Delete All

p.100
2.3 sec
On
p.101
ENGLISH
한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
DANSK
p.100
p.98
1.4 sec
2.0 sec
Off
Language
p.99
Page
Off
1.7 sec
p.98
p.99
Sub menu
BAHASA
POLSKI
Magyar
-
No
Yes
p.101
p.99
Menus are subject to change without prior notice.
097
Setting up the playback function using the LCD monitor
Resume
Play mode
You can set the playback type.
You can set various repeat and shuffle options. This function is adopted
only in the selected folder.
1. Press the MENU button in each mode.
2. Select a desired playing type in the [Resume] menu by pressing the
Up/Down button and pressing the OK button.
RESUME
RESUME
RESUME
On
On
On
Off
Off
Off
MOVE
EXIT
<MP3 mode>
[Off]:
[On]:
MOVE
EXIT
<PMP mode>
MOVE
EXIT
[Play All]:
Plays a single track once.
[Repeat One]: Plays a single track
Play Mode
Play All
repeatedly.
Repeat One
Repeat All
[Repeat All]: Plays all tracks in the
Random
folder repeatedly.
Random Repeat
[Random] : Randomly plays all tracks
EXIT
MOVE
in the folder once.
[Random Repeat] : Randomly plays all tracks in the folder repeatedly.
<TEXT VIEWER mode>
The browsing menu will be displayed to select a desired file.
When the camera is turned on / off or camera mode is
changed, this camera will memorize the latest stopped frame.
MP3 mode : plays back from the beginning of the file.
PMP mode : plays back from the lastest stopped frame.
TEXT VIEWER mode : plays back from the last stopped
frame.
Skin of MP3 player
You can set the skin of MP3 player.
[Default 1, 2] : Default skin will be set.
[User Skin 1, 2]: An image created by the
[MP3 Skin] menu (p.70)
will be set.
MP3 Skin
Default 1
Default 2
User Skin 1
User Skin 2
MOVE
098
EXIT
Setting up the playback function using the LCD monitor
Playing back the slide show
Delete all
While the MP3 file is playing back, captured images are displayed on
the LCD monitor continuously.
All files stored on the memory card will be deleted. In the MP3 mode,
only MP3 files are deleted. In the PMP mode, only multimedia files are
deleted. In the TEXT VIEWER mode, TEXT files are deleted.


[Play]: Display the images once.
[Repeat Play]: Display the images
continuously.
When the playing back is complete, the
slide show will stop.
To stop the slide show, press the Pause
button and then press the E button.
Slide Show
Play
Show Play
Show Interval
▶
Repeat Play
MOVE
EXIT
Delete All?
Delete All?
No
No
No
Yes
Yes
Yes
MOVE
EXIT
<MP3 mode>
[No] :
[Yes] :
Setting slide show interval
You can set the slide show play interval of MP3 mode.
– Select an interval from 2, 3 or 5
seconds.
Delete All?
MOVE
Move
EXIT
<PMP mode>
Cancels “Delete files”
A confirmation window will
display. Select [Yes] and press
the OK button. All files will be
deleted.
Exit
<TEXT VIEWER mode>
Delete All?
No
Delete All?
Yes
No
Yes
MOVE
EXIT
Slide Show
Show Play
Show Interval
▶
Frame search
2 sec
3 sec
5 sec
MOVE
EXIT
You can set the time of skip range when
you search the movie by pressing the
Left Right button. You can search a frame
Left/
you want easily.
[Normal, 30 sec, 1, 3, 5, 10 min]
: This will skip a set frame whenever you
press the Left/
Left Right button.
Seeking
Normal
30sec
1 min
3 min
5 min
10 min
MOVE
EXIT
099
Setting up the playback function using the LCD monitor
Display setting

You can set the play back function display on the LCD.

[5 sec]:


If there is no operation during
5 seconds, Menu bar will
Player Display
5 sec
disappear.
Off
[On]:
Menu bar will appear on the LCD On
monitor.
[Off]:
Menu bar will not appear on the
EXIT
MOVE
LCD monitor.
To see the caption, insert the caption file (.smi) by using the Samsung
Converter. (p.121)
If a multimedia file has a caption, the caption will appear regardless of
display setting.


The camera settings are fixed to default setting of Auto mode
( , , , ). The settings can’t be changed.
If the memory card is not inserted, this function will not operate.
Occasionally the next file will be played back when you press
the Shutter button, even though a memory card is inserted.
To cancel the recording mode of the MP3 mode, press the
E button or do not operate any buttons for about 10 seconds.
The equalizer setting is fixed to <Normal>.
Auto Scroll
The playing text is scrolled automatically and displays on the LCD
monitor.
[Off]:
The text will not be scrolled
automatically.
Press the Up/Down button and you can
use the Auto Scroll function.
Setting up the recording function in the MP3 mode

You can take a picture and listen to the
MP3 files at the same time.
[0.8, 1.1, 1.4, 1.7, 2.0, 2.3 sec]:
The text will be scrolled automatically.
The interval is marked on each menu icon.
1. Press the Shutter button and the MP3
stand-by icon will appear.
2. Press the Shutter button and an image
will be captured.
100
00010
E
MP3
AUTO SCROLL
Off
0.8 sec
1.1 sec
1.4 sec
1.7 sec
2.0 sec
MOVE
EXIT
Setting up the playback function
using the LCD monitor
MP3 BGM Setting
You can play MP3 files when you are
playing the text.
[Off]:
[On]:

You cannot play the MP3 files.
When you are playing the text,
you can play the MP3 files.
The last played MP3 files will be executed.
MP3 BGM
You can get the useful travel information around the world. The travel
information supports for Korean, English, Chinese, German and
French, and the language can vary depending on sales region. You can
download the tour guide information from Samsung Camera website.
Download the tour guide information
Off
On
MOVE
World tour guide
EXIT
Language setting
You can setup the language of OS (Operating System) that the text file
was made.
– If the characters of the text file aren’t
LANGUAGE
displayed correctly, open the file on
ENGLISH
Windows 2000 or later and save it
한국어
FRANÇAIS
again. We recommend using ‘Notepad’
DEUTSCH
and it has to be saved as ANSI
ESPAÑOL
ITALIANO
encoding type.
MOVE
EXIT
– Some unique characters may not be
displayed correctly on the camera.
– Encode the text files as the standard type or some characters may not
be displayed correctly.
In order for you to use the World Tour Guide function, the tour
information file should be stored on the memory. If there are no tour
information files that you want to, visit our website and download the
desired file.
1. Visit http://www.samsungcamera.com then select the tour guide
information you want.
2. Download the file to the computer and extract the file.
3. Connect and turn on the camera and computer.
4. Run the Window Explorer. Find the Removeable disk.
5. Make [TOUR] folder on the Removeable disk.
6. Select a file you want and copy it to the removeable disk.
101
World tour guide
World Tour Guide mode
Select the World Tour Guide mode
SHOOTING
MULTIMEDIA
TOUR
GUIDE
TEXT
VIEWER
MP3
SCENE
Fn Back
Fn
OK Select
Select the desired tour site by
pressing the Up/Down/Left/
Left Right
Left/
button and press the OK button.
Starting the world tour guide
Back
E
Info
Select the tour place by pressing
the Left/
Left Right/
Right Up/Down button.
You can find the detail information and pictures.
Move
Check the images
by pressing the
T button.
OK Select
Select the location by
pressing the Up/Down/
Left Right button and
Left/
press the OK button.
Fn
Back
T
Image
Check other tour
places by pressing
Left Right button.
Left/
Fn Back
OK Select
Select the country by
pressing the Up/Down/
Left Right button and
Left/
press the OK button.
102
Fn Back
OK Select
Select the state by
pressing the Up/Down/
Left Right button and
Left/
press the OK button.
Fn
Back
T
Image
Check the
information of the
site by pressing
the W button.
W
Text
OK Select
Select the picture by pressing the
Up/Down button and press the OK
button. You can see the picture of
the desired tour site on the screen.
World tour guide
You can select desired function.
3 Select [Yes] to add bookmark. You can
confirm the added bookmark in the
Bookmark list.
Bookmark
World time
Bookmark list
Information
Language
BOOKMARK
Do you want to
bookmark this region?
No
Sound
Yes
Move
Exit
Move


MENU
Bookmark list
[Bookmark list]: Select the [Bookmark
list] on the menu bar and the bookmark
list will appear.
– Press the MENU button to display
the tour guide information.
– Press the Fn button to delete the
selected area in the bookmark list.
Select
Adding the [Bookmark]

1 Select desired area and press E button
to display a menu bar.
Language
[Language]: Select the [Language] on
the menu bar and the language list will
appear.
BOOKMARK LIST
USA/California / Los Angeles
Japan / Kyoto / Nago Pineapple Park
Japan / Okinawa
Korea / Jejudo / Jeju Bunjae Artpia Muse
Korea / Seoul
USA / Alaska / Anchorage
Fn Delete
MENU
MENU
Select
LANGUAGE
ENGLISH
한국어
FRANÇAIS
DEUTSCH
Move
Move
Confirm
OK
MENU
Select
Select
2 Select the [Bookmark].
SOUND

Bookmark
SOUND
Off
Music1
Music2
Music3
My MP3
[SOUND]: Select the [SOUND] on the
menu bar and the sound list will appear.
Move
Move
이동
MENU 선택
Select
MENU
Select
103
World tour guide





Saving the information of some sites may take long time. Save
each information of sites in order.
If the downloaded files are changed by any non-official
methods, the files don’t playback on the camera.
Formating the camera deletes all data on the memory (including
protected images, Movies, Multi media files and Tour
Information). Copy the files to a computer before formating the
memory.
If there is no related site information file on the memory, the
site menu can be displayed but can’t be selected.
For the full version of Korean or Chinese, you can download it
from Samsung Camera website.
Important notes
Be sure to observe the following precautions!

This unit contains precision electronic components. Do not
use or store this unit in the following locations.
– Areas exposed to severe changes in temperature and humidity.
– Areas exposed to dust and dirt.
– Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
– Environments where there is high magnetism or excessive vibration.
– Areas with high explosives or highly flammable materials.


Do not leave this camera in places subject to dust, chemicals
(like naphthalene and mothballs), high temperature and high
humidity. Keep this camera with silica gel in a hermetically
sealed box when not planning to use the camera for a long
period of time
Sand can be particularly troublesome to cameras.
– Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
– Doing so may result in failure or may permanently render the camera
unusable.

Handling the camera
– Never drop the camera or subject it to severe shocks or vibrations.
– Protect the large size LCD monitor from an impact. When this camera
is not used, keep it in the camera case.
– Avoid obstructing the lens or the flash when you capture an image.
104
Important notes
– This camera is not waterproof. To avoid dangerous electrical shocks,
never hold or operate the camera with wet hands.
– If you use this camera in wet places, such as beach or pool, do not let
water or sand get inside the camera. Doing so may result in failure or
may permanently damage the unit.

moisture is dispersed. Moisture built up can also occur on the memory
card. If this happens, turn off the camera and remove the memory
card. Wait until the moisture has dispersed.
Caution on Using the Lens
– If the lens is subjected to direct sunlight, it could result in the
discoloration and deterioration of the image sensor.
– Take care not to get fingerprints or foreign substances on the surface of
the lens.


If the digital camera is not used for a long period, an electric
discharge can occur. It is a good idea to remove the battery
and the memory card if you do not intend using the camera for
an extended period of time.
If the camera is exposed to electronic interference, it will turn
itself off to protect the memory card.
Camera Maintenance
– Use a soft brush (available from photo stores) to gently clean the lens and
LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning
fluid can be used. Clean the camera body with a soft cloth. Do not allow
this camera to come into contact with solvent materials such as benzol,
insecticide, thinners etc. This may damage the body shell of the camera and
also affect its performance. Rough handling can damage the LCD monitor.
Take care to avoid damage and keep the camera in its protective carry case
at all times when not in use.
Extremes in temperature may cause problems.
– If the camera is transferred from a cold to a warm and humid
environment, condensation can form on the delicate electronic circuitry.
If this occurs, turn the camera off and wait for at least 1 hour until all






Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash
unit to fire. This is not harmful to the camera and is not a
malfunction.
When images are uploaded or downloaded, the data transfer
may be affected by static electricity. In this case, disconnect
and re-connect the USB cable before trying the transfer again.
Before an important event or going on a trip, you should check
the camera condition.
– Take a picture for testing the camera condition and prepare extra battery.
– Samsung cannot be held responsible for camera malfunctions.


Do not use headphones/earphones while driving, cycling, or
operating any motorized vehicle. It may create a traffic hazard
and can be illegal in some areas.
Avoid using headphones/earphones at high volume. Hearing
experts advise against continuously loud and extended play.
If you experience a ringing in your ears, reduce volume or
discontinue use.
105
Warning indicator
There are several warnings that may appear on the LCD display.
[ Card Error ! ]
• Memory card error.
 Turn off the camera power and turn it on again.
 Insert the memory card again.
 Insert and format the memory card. (p.61)
[ Card Locked! ]
• The memory card is locked.
 SD/SDHC memory card : Slide the write protect switch to the top of
the memory card.
[ No Card! ]
• A memory card is not inserted.
 Insert the memory card again.
 Turn off the camera power and turn it on again.
[ No Image! ]
• There are no images stored on the memory.
 Take images.
 Insert a memory card that is holding some images.
106
[ File Error! ]
• File error.
 Delete the file.
• Memory card error.
 Contact a camera service centre.
[ Low Battery! ]
• There is low battery capacity.
 Insert fresh batteries.
[ Low Light! ]
• When taking pictures in dark places.
 Take pictures in Flash Photography mode.
[Out of Number]
• When selecting too many printing pages in the PictBridge menu.
 Select printing page within the limitation.
[DCF Full Error]
• Violation of DCF format.
 Copy the images to a PC and format the memory.
Before contacting a service centre
Please check the following.
The camera doesn’t switch on.
• There is low battery capacity.
 Insert fresh batteries. (p.16)
• Battery is inserted incorrectly with the polarities reversed.
 Insert the battery according to the polarity marks (+, -).
The camera power ceases while in use.
• The battery is exhausted.
 Insert fresh batteries.
• The Camera is turned off automatically.
 Turn on the camera power again.
Battery power quickly drains.
• The Camera is being used in low temperatures.
 Keep the camera in warm conditions (i.e. inside a coat or jacket) and
only remove it in order to take images.
Camera does not take images when pressing the Shutter button.
• There is insufficient memory capacity.
 Delete unnecessary image files.
• The memory card has not been formatted.
 Format the memory card (p.61).
• The memory card is exhausted.
 Insert a new memory card.
• The memory card is locked.
 Refer to [Card Locked!] error message.
• The camera’s power is off.
 Turn the camera power on.
• The battery is exhausted.
 Insert fresh batteries. (p.16)
• Battery is inserted incorrectly with the polarities reversed.
 Insert the battery according to the polarity marks (+, -).
The camera suddenly stops working while in use.
• The camera stopped due to a malfunction.
 Remove /re-insert battery and switch the camera on.
The camera buttons do not operate.
• Camera malfunction.
 Remove/re-insert battery and switch the camera on.
107
Before contacting a service centre
The images are unclear.
• A picture was taken of a subject without setting an appropriate macro mode.
 Select an appropriate macro mode to take a clear image.
• Taking a picture beyond the flash range.
 Take a picture within the flash range.
• The lens is smudged or dirty.
 Clean the lens.
The flash does not fire.
• Flash off mode has been selected.
 Dis-engage flash off mode.
• The camera mode can’t use the flash.
 Refer to the FLASH instruction. (p.33)
Incorrect date and time is displayed
• The date and time have been set incorrectly or the camera has adopted
the default settings.
 Reset the date and time correctly.
A card error has occurred while the memory card is in the camera.
• Incorrect memory card format.
 Re-format the memory card.
The images don’t play back.
• Incorrect file name. (Violation of DCF format)
 Do not change the image file name Colour of image is different to
the original scene.
108
Colour of image is different to the original scene.
• White balance or effect setting is incorrect.
 Select appropriate White balance and effect.
Images are too bright.
• Exposure is excessive.
 Reset exposure compensation.
No image on external monitor.
• The external monitor has not been connected properly with the camera.
 Check the connection cables.
• There are incorrect files in the memory card.
 Insert a memory card that has correct files.
When using the PC’s explorer, the [Removable Disk] file does not show.
• Cable connection is incorrect.
 Check the connection.
• The camera is off.
 Turn the camera on.
• The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac
OS 10.1 ~ 10.4. Alternatively the PC does not support USB.
 Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 - 10.4 to
PC that supports USB.
• The camera driver is not installed.
 Install a [USB Storage Driver].
Specifications
Image Sensor
– Type: 1/2.5” CCD
– Effective Pixel : Approx. 8.2 Mega-pixel
– Total Pixel : Approx. 8.4 Mega-pixel
Lens
– Focal Length : NV Lens f = 6.0 ~ 30.0mm
(35mm film equivalent : 36 ~ 180mm)
– F No. : F3.5 ~ F3.9 (Wide)
F4.9 ~ F8.0 (Tele)
– Digital Zoom :
Still Image mode : 1.0X ~ 5.0X
Play mode : 1.0X ~ 12.8X (depends on image size)
LCD Monitor
– 3.0” color TFT LCD (230,000 pixel)
Focusing
– Type : TTL auto focus, Multi-AF, Face Recognition AF,
Manual Focus
– Range
Normal
Wide
Tele
80cm ~ Infinity
Macro
Super Macro
Auto Macro
5cm ~ 80cm
1cm ~ 5cm
5cm ~ Infinity
30cm ~ 80cm
-
30cm ~ Infinity
Shutter
– Speed 1 ~ 1/2,000 sec. (Night : 16 ~ 1/2,000 sec.)
Exposure
– Control : Program AE
– Metering : Multi, Spot, Center-weighted, Face
Recognition
– Compensation : ±2EV (1/3EV steps)
– ISO : Auto, 80, 100, 200, 400, 800, 1600
Flash
– Modes : Auto, Auto & Red-eye reduction, Fill-in flash,
Slow sync, Flash off, Red-eye Fix
– Range: Wide : 0.2m~4m,
Tele : 0.5m~2.8m (ISO AUTO)
– Recharging Time : Approx. under 5 seconds (new battery)
Sharpness
– Soft+, Soft, Normal, Vivid, Vivid+
White Balance
– Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
Voice Recording
– Voice Recording (max 10 hours)
– Voice Memo in Still Image (max. 10 sec.)
Date Imprinting
– Date, Date & Time, Off (user selectable)
Shooting
– Still Image
• Mode : Auto, Program, ASR, Scene
 Scene : Night, Portrait, Children, Landscape,
Text, Close-up, Sunset, Dawn, Backlight,
Fireworks, Beach & Snow, Cafe, Food, Self
Shot (Total 14 modes)
• Shooting : Single, Continuous, AEB, Motion Capture,
Wise shot
• Self-timer : 2 sec., 10 sec., Double(10 sec, 2 sec)
109
Specifications
– Movie Clip
• With Audio or without Audio (Max 2 Hours)
• Size : 800x592, 640x480, 320x240
• Frame rate: 30 fps, 20 fps, 15 fps (20 fps for
800x592)
• Optical Zoom up to 5.0X
• Movie stabilizer(User selectable)
• Movie Editing (Embedded) : Pause during
recording, Still Image Capture Time Trimming
Storage
– Media
• Internal memory : 190MB flash memory
• External Memory (Optional)
SD (up to 2GB guaranteed)
SDHC Card (up to 4GB guaranteed)
MMC Plus (Up to 1GB, guaranteed)
– Image Size and Capacity (256 MB Size)
Super Fine
Fine
Normal

3264x2448 3264x2176 3264x1836 2592x1944 2048x1536 1024x768
49
58
71
86
128
372
94
107
133
161
226
520
135
171
202
220
306
600
These figures are measured under Samsung standard conditions and
may vary depending on shooting conditions and camera settings.
E Button
– Effect: Color Effect: Normal, B&W, Sepia, Red, Blue,
Green, Negative, Custom Color
Special Color: Color Mask
Image Adjust : Saturation
FUN: Cartoon, Photo Frame, High Light,
Composite
– Editing: Image Edit: Resize, Rotate
Color Effect: Normal, B&W, Sepia, Red, Blue,
Green, Negative, Custom Color
Special Color: Color Filter, Color Mask
Image Adjust : Red Eye Fix, Brightness,
Contrast, Saturation, Add Noise
Fun: Cartoon, High Light, Composite, Photo
Frame, Sticker
Image Play
– Single image, Thumbnails, Slide show
* Slide show: Slide show with Effect & Music
Multi function
– MP3, PMP, World Tour Guide, Text Viewer, Portable
Memory, Voice Recorder
– File Format
• Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1,
PictBridge 1.0
• Movie Clip : AVI (MPEG-4)
• Audio : WAV
110
Specifications

Interface
–
–
–
–
Digital output connector : USB 2.0 High Speed
Audio : Mono
Video output : NTSC, PAL (user selectable)
DC Adapter : 24 pin connector
Power Source
– Rechargeable battery : SLB-1137D, 3.7V (1100mAh)
– Adaptor : SAC-46, SUC-C2
 Included battery may vary depending on sales region.
Dimensions
(WxHxD)
– 95 X 61.5 X 20.2mm (excluding protrusions)
Weight
– 158g (without batteries and card)
Operating
Temperature
– 0 ~ 40°C
Operating Humidity
– 5 ~ 85%
Software
– Application: Samsung Master, Samsung Converter,
Adobe Reader

MP3 Specification
Audio
–
–
–
–
File
– File Format: MP3 (MPEG-1/2/2.5 Layer 3)
– Bit Rate : 48 ~ 320kbps (Including VBR)
Sound Effect
– SRS WOW HD, Normal, Classic, Dance, Jazz, Live,
Rock
Play Mode
– All, Repeat One, Repeat All, Random, Random Repeat
– MP3&Capturing (Capturing Mode is Auto Default, 3M)
– Auto reload function (Remember both the last played
file and frame)
– Background skin of MP3 playback using user images
PMP Specification
PMP Decoder
– Movie: Modified Xvid MPEG4 (Other video files
have to use Samsung Converter S/W)
– Audio: MPEG Layer 2 (Samsung Convert S/W)
Play Mode
– Fast Forward/Rewind(Max 32x)
– Seeking in Play, Skipping in Play
(Normal, 30sec, 1min, 3min, 5min, 10min)
– Auto skipping after one file played
– Auto reload function (Remember last played frame)
– Support Full Screen in Converting S/W
Subtitle
– Support SMI file (Using Samsung Converter S/W)
Frequency : 20Hz ~ 20KHz
Earphone Port : 2.5mm Port (Stereo Type)
Output: Maximum Volume Left 40mW + Right 40mW (16Ω)
Noise Ratio: 88 dB with 20 KHz LPF
111
Specifications

Please ensure that you read the instruction manual carefully before
use.
Text Specification
File
– TXT extension name, up to 99999 pages
File format
– Window : ANSI (Windows 98 or later), Unicode /
Unicode (Big-Endian) / UTF-8 (Windows 2000/XP)
– Mac : ANSI, Unicode (UTF-16)
Function
–
–
–
–
Language
– English, Korean, French, German, Spanish, Italian,
Chinese, Taiwanese, Japanese, Russian, Portuguese,
Dutch, Danish, Swedish, Finnish, Bahasa, Polish,
Hungarian, Czech, Turkish.
* Supportable language is subject to change without prior
notice.


112
Software notes
Auto Scroll (0.8 sec ~ 2.3 sec)
Skipping by 1 page / 10 pages
Auto reload function (Remember last page)
Support MP3 BGM during displaying text file
Specifications are subject to change without prior notice.
All trademarks are the property of their respective owners.
– The attached software is a camera driver and image editing software
tool for Windows.
– Under no circumstances should all or part of either the software or the
user manual be reproduced.
– Copyrights for software are licensed only for use with a camera.
– In the unlikely event of a manufacturing fault, we will repair or exchange
your camera. We cannot, however, be held responsible in any way for
damage caused by inappropriate use.
– Using a Hand-made PC or a PC and OS that has not been guaranteed
by the manufacturer is not covered by the Samsung warranty.
– Before reading this manual, you should have a basic knowledge of
computers and O/S (Operating Systems).
About the software
System requirements
For Windows
PC with processor better than
Pentium II 450MHz
(Pentium 800MHz recommended)
* Samsung Converter
PC with processor better than
Pentium 500MHz (Pentium IV
recommended)
For Macintosh
After inserting the CD-ROM provided with this camera into the
CD-ROM drive, the following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
Power Mac G3 or later, or Intel
Processor

Windows 98SE / 2000 / ME /
XP/Vista
Camera driver : This enables images to transfer between the
camera and PC.
This camera uses the USB Storage Driver as the camera driver. You
can use the camera as a USB card reader. After installing the driver
and connecting this camera to the PC, you can find [Removable Disk]
in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the
Application CD. You can use the camera with Mac OS 10.1~10.4.
* Samsung Converter
Windows 2000 or later
recommended
Mac OS 10.1 ~ 10.4
Minimum 128MB RAM
(Over 512MB recommended)
Minimum 256MB RAM
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
XviD codec: This makes movie clips (MPEG-4) recorded with
this camera play back on a PC.
MPlayer (For movie clip)
To play back a movie clip recorded with this camera, you must install the
XviD codec. If a movie clip recorded with this camera does not play well,
install this codec. This software is only compatible with Windows.
1024×768 pixels, 16-bit color
display compatible monitor
(24-bit color display recommended)
Microsoft DirectX 9.0 or later

113
About the software


Setting up the application software
Samsung Converter: Multimedia converting program
To use this camera with a PC, install the application software first.
Multimedia (Movie, Video clip, etc) files can be converted into movie clips
that can be played back on this camera. This software is only compatible
with Windows.
After this has been done, the stored images in the camera can be
moved to the PC and can be edited by an image editing program.
Samsung Master : This is the all-in-one multi media software
solution.

You can download, view, edit and save your digital images and movie clips
with this software. This software is only compatible with Windows.


Be sure to check the system requirements before installing the
driver.
You should allow 5 ~ 10 seconds for running the automatic
setup program according to the capability of your computer.
If the frame does not appear, run the [Windows Explorer] and
select [Installer.exe] in the CD-ROM Drive root directory.
You can visit the Saung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display. Click the [Install] menu in the Auto run
frame.
2. Install the camera driver, DirectX, XviD, Samsung Converter, Samsung
Master and Adobe Reader by selecting a button shown on the monitor.
If a latest version of DirectX was installed on your computer, DirectX
may not be installed.
114
Setting up the application software
3. To play back the movie clip recorded with this camera on the computer,
install the XviD codec.

The XviD codec is distributed according to the GNU General Public
License and everyone can copy, distribute and change this codec. This
License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms
of this General Public License. For more information, see the License
documents (http://www.gnu.org/copyleft/gpl.html).
115
Setting up the application software
4. Install the software by instructions on the monitor.
5. After restarting the computer, connect the PC to the camera with the
USB cable.
6. Turn the camera power on. The [Found
New Hardware Wizard] will open and the
computer will recognise the camera.
 If your OS is Windows XP/ Vista, an
image viewer program will open. If
the download window of Samsung
Master opens after starting Samsung
Master, the camera driver was set up
successfully.




116
If you have installed the camera driver, the [Found New
Hardware Wizard] may not open.
On a Windows 98SE system, the Found New Hardware
Wizard dialog box opens and a window asking you to select a
driver file may appear. In this case, specify “USB Driver” in the
CD supplied.
PDF documents of user manual are included in the Software
CD-ROM supplied with this camera. Search the PDF files with
Windows explorer. Before opening the PDF files, you must
install the Adobe Reader included in the Software CD-ROM.
To install the Adobe Reader 6.0.1 correctly, Internet Explorer
5.01 or later has to be installed. Visit “www.microsoft.com” and
upgrade the Internet Explorer.
Starting PC mode
If you connect the USB cable to a USB port on your PC and then
turn on the power, the camera will automatically switch to “computer
connection mode”. In this mode, you can download stored images to
your PC through the USB cable.


Connecting the camera to a PC

If you selected [Printer] in Step 5, when you connect the camera to your
computer, the [Connecting Printer] message will be displayed and the
connection will not be established. In this case, disconnect the USB cable,
and then follow the procedure from Step 2 and onward.

Disconnecting the camera and PC
Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with
the supplied USB cable.
3. Turn on the computer. The camera and
computer are connected.
4. External device selection menu will
display on the LCD monitor.
5. Select the [Computer] by pressing the
Up/Down button and press the OK button.
Select USB
Computer
Printer
OK
Confirm
Refer to page 119 (Removing the removable disk).
117
Starting PC mode

Downloading stored images
You can download the still images stored on the camera to your PC’s
hard disk and print them or use a photo editing software to edit them.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
– [Cut] : cuts a selected file.
– [Copy] : copies files.
1. Connect the camera to your PC with the
USB cable.
2. On your computer’s desktop display,
select [My computer] and double click
[Removable Disk  DCIM  100SSCAM].
The image files will then be displayed.
5. Click a folder where you want to paste the file.
6. Press the right mouse button and a
pop-up menu will open. Click [Paste].
3. Select an image and press the right
mouse button.
7. An image file is transferred from the
camera to your PC.
118
Starting PC mode
– By using [Samsung Master], you can see the stored images in the
memory directly on the PC monitor and you can copy or move the
image files.


We recommend that you should copy the images to the PC to
view them. Opening images directly from the removable disk
may be subject to unexpected disconnection.
When you upload a file that is not taken by this camera to the
Removable Disk, the [File Error!] message will be displayed on
the LCD monitor in the Play mode, and nothing is displayed in
THUMBNAIL mode.
Removing the removable disk

Windows 98SE
1. Check whether the camera and PC are transferring a file. If the camera
status lamp blinks, please wait until the lamp has finished blinking and
is constantly on.
2. Unplug the USB cable.

Windows 2000/ME/XP/Vista
(The illustrations may differ from those shown depending on the Windows
O/S.)
1. Check whether the camera and PC are transferring a file. If the camera
status lamp blinks, please wait until the lamp has finished blinking and
is constantly on.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
Double-click!
3. The [Unplug or Eject Hardware] window
will open. Select the [USB Mass Storage
Device] and click the [Stop] button.
4. The [Stop a Hardware device] window
will open. Select the [USB Mass Storage
Device] and click the [OK] button.
119
Removing the removable disk
5. A [Safe to Remove Hardware] window
will open. Click the [OK] button.
6. A [Unplug or Eject Hardware] window
will open. Click the [Close] button and
the removable disk will be removed
safely.
7. Unplug the USB cable.
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up. This camera is compatible
with MAC OS 10.1 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the
camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory
will be displayed.
2. Select an image file and copy or move it to MAC.

120
For Mac OS 10.1 or later : First complete uploading from
computer to camera and then remove the removable disk with
the Extract command.
Removing the USB Driver for
Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add/Remove Programs
Properties.
Samsung Converter
Multimedia (Movie, Video clip, etc) files can be converted into movie
clips that can be played back on this camera. This software is only
compatible with Windows.

How to use the Samsung Converter
1. Double click the Samsung Converter icon on
the desktop.
2. Click the Add icon and select a file that you
want to add.
3. If you want to add a caption, check [Use
subtitles from file (*.smi)].
4. Select settings that you want and click the
[Convert] button.
– [Output format] : You can set the output format.
– [Frame size] : You can set the width and height of output movie clip.
– [Frame rate] : You can set fps (Frame Per Second).
– [Screen size] : You can set type of display.
– [Split by size] : You can set the file size of output movie clip.
5. Connect the camera to the computer with the supplied USB cable.
6. Copy the converted movie clip in the
destination folder and paste the file in the [PMP]
folder.
6. Uninstallation is complete.
121
Samsung Converter
7. You can play back the converted movie clip
in the Play mode of the camera.
 Refer to the [Help] menu in Samsung
Converter for further information.

Who bent my camera?





Before converting a multimedia file, check whether it plays
back correctly on the Windows Media Player.
The converted files are saved as *.sdc file type that can be
played back on the Windows Media Player.
The Samsung Converter doesn’t cover every kind of codec.
If a multimedia file can’t play back on the Windows Media
Player, install a multicodec (We recommend Full version of
latest K-Lite Codec). Install the Samsung Converter again after
installing the multi-codec.
You can select destination folder of each converted file. When
the folder is not selected, the converted files are saved on a
folder where the source file is.
If you convert several files at the same time, the computer may
be running slow because of the CPU capacity. In this case,
add the files in the program one by one.






122
Computer specification, installed code and programs are the
main causes of converting error. When a converting error
happens, please check the following.
– Any codecs compatible with the files were not installed or
installed incorrectly. In this case, find a compatible codec
and install it. If you do not find any compatible codecs,
install a multi-codec.
– If you installed various multi-codecs on your computer, it
may cause converting problems. In this case, remove all
codecs and install a proper multi-codec.
– Install a latest Windows Media Player.
– Visit device (PC, Graphic card, Sound card) manufacturer
web-site and upgrade them with the latest version.
Some kinds of multimedia files are not converted. If the
converted media files are damaged, they may not play back on
the camera. Unusual type of files may not be converted. The
sound and scenes may not synchronise.
The expected file sizes after converting a media file may vary.
It depends on the computer system you use.
If there is no font that is compatible with the script file on your
PC, the script is shown as ‘‘.
Transferring the converted file to a removable disk is time
consuming. It may take a long time. The duration depends on
the file size.
Do not use the PMP mode while driving. It may create a traffic
hazard.
A file that does not support fast search on the Windows Media
Player can’t select converting range and divide file size.
Samsung Master
You can download, view, edit and save your images and movies with
this software. This software is only compatible with Windows.
To run the Samsung Master, double click the Samsung Master icon on
the desktop.

Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display
after connecting the camera to your PC.
– To download the captured images, select
the [Select All] button.
– Select desired folder in the window and
click the [Select All] button. You can save
captured images and selected folder.
– If you click the [Cancel] button,
downloading will be cancelled.
3. Click [Next >] button.
4. Select a destination and make a new folder
in which to save downloaded images and
folders.
– Folder names can be made in order of
date and images will be downloaded.
– Folder name will be made as you want
and images will be downloaded.
– After selecting a folder that was made
before, images will be downloaded.
5. Click [Next >] button.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
7. Downloaded images will be displayed.
123
Samsung Master

Image viewer : You can view the stored images.
– Image viewer functions are listed below.
① Menu bar: You can select menus. File, Edit, View, Tools, Change
functions, Auto download, help, etc.
② Image selection window: You can select the desired images in this
window.
③ Media type selection menu: You can select image viewer, image edit and
movie edit functions in this menu.
④ Preview window: You can preview an image or a movie clip and check
the multi media information.
⑤ Zoom bar : You can change preview size.
⑥ Folder display window: You can see the folder location of the selected
image.
⑦ Image display window: Images of the selected folder are displayed.
 Refer to the [Help] menu in Samsung Master for further information.
124

Image edit : You can edit the still image.
– Image edit functions are listed below.
① Edit menu : You can select the following menus.
[Tools]: You can resize or crop the selected image. See the [Help]
menu.
[Adjust]: You can modify image quality. See the [Help] menu.
[Retouch]: You can change image or insert effects on the image. See
the [Help] menu.
② Drawing tools : Tools for editing an image.
③ Image display window : A selected image is displayed in this window.
④ Preview window : You can preview the changed image.
 A still image edited with Samsung Master can’t be played back on the
camera.
 Refer to the [Help] menu in Samsung Master for further information.
Samsung Master

Movie edit : You can get the still image, movie clip, narration,
music files together in a movie clip.


② Frame display window : You can insert multi media in this window.
Some movie clips that were compressed with a codec that is not
compatible with the Samsung Master can’t play back in the Samsung
Master.
Refer to the [Help] menu in Samsung Master for further information.
– Movie clip edit functions are listed below.
① Edit menu:You can select the following menus.
[Add Media]: You can add other media elements to a movie.
[Edit Clip]: You can change the brightness, contrast, colour and
saturation.
[Effects]: You can insert an effect.
[Set Text]: You can insert texts.
[Narrate]: You can insert a narration.
[Produce]: You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv) and Windows
media (asf) file types.
125
FAQ
Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
 Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
 Install the camera driver correctly. Turn off the camera, remove the USB
cable, plug in the USB cable again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
 Turn the camera power off and on again. Transfer the file again.
Case 4
When using the USB hub.
 There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
Case 5
Are other USB cables connected to the PC?
 The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
126
Case 6
When I open the Device Manager (by clicking Start  (Settings)
 Control Panel  (Performance and Maintenance)  System 
(Hardware)  Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
 Right-click on the entry with the question (?) or exclamation (!) mark
and select “Remove”. Restart the PC and connect the camera again.
For Windows 98SE PC, remove the camera driver also, restart the
PC, and then reinstall the camera driver.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the computer may
not recognise the camera as a removable disk.
 Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
isable the program.
Case 8
The camera is connected to the USB port located on the front of the
computer.
 When the camera is connected to the USB port located on the
front of the computer, the computer may not recognise the camera.
Connect the camera to the USB port located on the back of the
computer.
FAQ
When the movie clip doesn’t play back on the PC


[Installing codec for Mac OS]
1) Visit the following site for downloading the codec. (http://www.divx.
com/divx/mac)
2) Click the [Free Download] menu on the top right side of the window
then download windows appears.
3) Check the version of Mac OS and click the [Download] button to
download the file and save it on a desired folder.
4) Run the downloaded file and the codec for playing back the movie
clip will be installed.
 If the movie file is not played back on the Macintosh OS, use a
media player that supports Xvid codec (e.g: Mplayer).
When the movie clip recorded by the camera doesn’t play back on the
PC, the causes are mostly due to the codec installed on the PC.
When codec for play back the movie clip isn’t installed
 Install the codec as listed below.
[Installing codec for Windows]
 Installing the XviD codec
1) Insert the CD provided with the camera.
2) Run the windows explorer and select [CD-ROM drive:\XviD] folder
and click the XviD-1.1.2-01112006.exe file.
 The XviD codec is distributed according to the GNU General Public
License and everyone can copy, distribute and change this codec.
This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. For more information,
see the License documents (http://www.gnu.org/copyleft/gpl.html).

When the DirectX 9.0 or later is not installed
 Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file. The
DirectX will be installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx

If a PC (Windows 98SE) stops responding while the camera
and PC are connected repeatedly
 If a PC (Windows 98SE) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera.
In this case, re-start the PC.
127
FAQ

If a PC connected with the camera stops responding while
Windows is starting.
 In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to
disable and re-start the PC. The Legacy USB Support is in the BIOS
setup menu. (The BIOS setup menu differs from the PC manufacturers
and some BIOS menus don’t have Legacy USB Support) If you can’t
change the menu by yourself, contact to the PC manufacturer or BIOS
manufacturer.

If the movie clip can’t be deleted, or the removable disk can’
t be extracted or an error message displays during the file
transfer.
 If you install only the Samsung Master, the problems mentioned above
occasionally happen.
– Close the Samsung Master program by clicking the [Samsung
Master] icon on the Taskbar.
–Install all the application programs included in the software CD.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical
& Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should
not be disposed of with other household wastes at the end
of its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial
wastes for disposal.
Samsung Techwin cares for the environment at
all product manufacturing stages to preserve the
environment, and is taking a number of steps to
provide customers with more environment-friendly
products. The Eco mark represents Samsung
Techwin’s will to create environment-friendly
products, and indicates that the product satisfies the
EU RoHS Directive.
128
FCC notice

NOTE :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the distance between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio / TV technician for help.


Declaration of Conformity
Trade Name : SAMSUNG TECHWIN
Model No. : Samsung i85
Responsible Party : Samsung Opto-Electronics America, INC.
Address : 40 Seaview Dr. Secaucus, NJ 07094
Telephone No. : 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
129
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8222, 8488, 8490
FAX : (82) 31-740-8398
www.samsungcamera.com
SAMSUNG OPTO-ELECTRONICS GmbH
ZENTRALE, KEINE REPARATUR
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS, GERMANY
TEL: 49 (0) 6196 66 5303
FAX: 49 (0) 6196 66 5366
TECHNISCHE SERVICE HOTLINE:
00800 4526 3727
(nur kostenfrei für Anrufe aus Deutschland)
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE 1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
1-800-SAMSUNG (726-7864)
www.samsungcamerausa.com
Die Adressen Ihrer Kundendienste sowie die
Garantiebestimmungen entnehmen Sie bitte aus dem
beiliegenden Faltblatt (SAMSUNG INTERNATIONAL
WARRANTY CERTIFICATE)
INTERNET: www.samsungcameras.de
RUSSIA INFORMATION CENTER
SAMSUNG ELECTRONICS
117545 ST. DOROZHNAYA BUILDING 3,
KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA
TEL : (7) 495-363-1700
CALL FREE : (8) 800 555 55 55 (from Russia only)
www.samsungcamera.ru
If you have any questions or comments relating to
Samsung cameras, Please contact
the SAMSUNG customer care center
SAMSUNG FRANCE S.A.S.
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
www.samsungphoto.fr
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD
NO.9 ZHANGHENG STREET. MICRO-ELECTRONIC
INDUSTRIAL PARK JINGANG ROAD TIANJIN CHINA.
POST CODE : 300385
TEL:800-810-5858
www.samsungcamera.com.cn
Internet address - http : //www.samsungcamera.com
The CE Mark is a Directive conformity
mark of the European Community (EC)
Download PDF