Samsung | SAMSUNG NV10 | Samsung NV10 User Manual

User Manual
Thank you for buying a Samsung camera.
This manual will guide you through using the camera, including
capturing images, downloading images and using the application software.
Please read this manual carefully before using your new camera.
ENGLISH
Instructions
Getting to know your camera
ƈ Use this camera in the following order.
Set up the camera driver
Take a picture
Insert the USB cable
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.61)
Take a picture. (p.18)
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.63)
Check the camera’s power
Check the camera’s power. If the power is
turned off, press the camera button to turn
it on.
Check [Removable Disk]
Open Window’s EXPLORER and search
for [Removable Disk]. (p.65)
Thank you for buying a Samsung Digital Camera.
ƃ Prior to using this camera, please read the user manual thoroughly.
ƃ When you require After Sales service, please bring the camera and the cause of
the camera malfunction (such as battery, Memory card etc.) to the A/S centre.
ƃ Please check that the camera is operating properly prior to when you intend to
use it (e.g. for a trip or an important event) to avoid disappointment. Samsung
camera takes no responsibility for any loss or damages that may result from
camera malfunction.
ƃ Keep this manual in a safe place.
ƃ Specifications are subject to change without prior notice.
Ҭ Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
Ҭ All brand and product names appearing in this manual are registered trademarks
of their respective companies.
ƃ If you use a card reader to copy the images on the memory card to your PC, the
images could be damaged. When transferring the images taken with the camera
to your PC, be sure to use the supplied USB cable to connect the camera to
your PC. Please note that the manufacturer holds no responsibility for loss or
damage of images on the memory card due to the use of a card reader.
ŝ1Ş
Danger
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
ƈ Do not attempt to modify this camera in any way. To do so may result in fire,
injury, electric shock or severe damage to you or your camera. Internal
inspection, maintenance and repairs should only be carried out by your dealer or
Samsung Camera Service centre.
ƈ Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
ƈ Should any form of liquid or a foreign object enter the camera, do not use it.
Switch off the camera, and then disconnect the power source. You must contact
your dealer or Samsung Camera Service centre. Do not continue to use the
camera as this may cause a fire or electric shock.
ƈ Do not insert or drop metallic or inflammable foreign objects into the camera
through access points e.g. the memory card slot and battery chamber. This may
cause a fire or electric shock.
ƈ Do not operate this camera with wet hands. This could pose a risk of electric
shock.
ŝ2Ş
Warning
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
ƈ Do not use the flash in close proximity to people or animals. Positioning the flash
too close to your subject’s eyes may cause eyesight damage.
ƈ For safety reasons keep this product and accessories out of reach of children or
animals to prevent accidents e.g.:
ҮSwallowing battery or small camera accessories. If an accident should occur,
please consult a doctor immediately.
ҮThere is the possibility of injury from the camera’s moving parts.
ƈ Battery and camera may become hot during prolonged use and it may result in
camera malfunction. Should this be the case, allow the camera to sit idle for a
few minutes to allow it time to cool.
ƈ Do not leave this camera in places subject to extremely high temperatures, such
as a sealed vehicle, direct sunlight or other places of extreme variances in
temperature. Exposure to extreme temperatures may adversely affect the
camera’s internal components and could cause a fire.
ƈ When in use, do not cover the camera or Charger. This may cause heat to build
up and distort the camera body or cause a fire. Always use the camera and its
accessories in a well-ventilated area.
Caution
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in a minor or moderate injury.
ƈ Leaking, overheating, or damaged battery could result in fire or injury.
ҮUse battery with the correct specification for the camera.
ҮDo not short circuit, heat or dispose of battery in fire.
ҮDo not insert the battery with the polarities reversed.
ƈ Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
ƈ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
ƈ Do not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the
wall socket. Then make sure that any connector cords or cables to other devices
are disconnected before moving the camera. Failure to do so may damage the
cords or cables and cause a fire or electric shock.
ƈ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
ƈ Avoid obstructing the lens or the flash when you capture an image.
ƈ Before inserting any cables or AC adapter, check the directions and do not insert
by force. It may cause breakage of cable or camera.
ƈ Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip
cards near the case.
Contents
READY
ƃSystem chart ōōōōōōōōō5
ƃIdentification of features ōōōōō6
ƈFront & Topōōōōōōōōōō6
ƈBack & Bottom ōōōōōōōō7
ƈBottomōōōōōōōōōōōō8
ƈCradle (Optional) ōōōōōōō8
ƈSelf-timer lamp ōōōōōōōō9
ƈCamera Status Lamp ōōōōō9
ƈMode dial ōōōōōōōōōō9
ƈMode iconōōōōōōōōōō10
ƃConnecting to a Power Source ō10
ƈHow to charge the rechargeable
battery (SLB-0837B) ōōōōō12
ƃInserting the memory card ōōō13
ƃInstructions on how to use the
memory card ōōōōōōōōō13
RECORDING
ƃWhen Using the Camera for the First
Time : Smart button ōōōōōō15
ƃWhen Using the Camera for the First Time :
Setting up the Date / Time and Languageō16
ƃLCD monitor indicator ōōōōō17
ƃStarting the recording mode ōō18
ƈHow to use the AUTO mode ōō18
ƈHow to use the PROGRAM mode ō18
ƈHow to use the Manual mode ō18
ƈHow to use the ASR (Advanced
Shake Reduction) mode ōōōō19
ƈHow to use the Special Effect mode ō19
ƈHow to use the SCENE mode ō19
ƈHow to use the MOVIE CLIP mode ō19
ƈRecording the movie clip without voice ō20
ƈPausing while recording a movie
clip (Successive Recording) ōō20
ƈUsing Successive Recording ōō20
ƃThings to Watch Out for When
Taking Pictures ōōōōōōōō20
ƃUsing the camera buttons to set
the camera ōōōōōōōōō21
ƈPOWER button ōōōōōōō21
ƈShutter button ōōōōōōōō21
ƈZOOM W / T buttonōōōōōō21
ƃUsing the LCD monitor to set the
camera settingsōōōōōōōō23
ƈColor toneōōōōōōōōōō24
ƈBrightnessōōōōōōōōōō24
ƈSelecting focus type ōōōōō25
ƈFlash ōōōōōōōōōōōō25
ƈSize ōōōōōōōōōōōō26
ƈContinuous shot ōōōōōōō26
ƈMetering ōōōōōōōōōō27
ƈSharpness ōōōōōōōōō27
ŝ3Ş
Contents
ƈEffectōōōōōōōōōōōō28
ƈQuality / Frame rateōōōōōō28
ƈSelf-timer / Remote control ōōō29
ƈVoice recording / Voice memo ō30
ƈWhite balance ōōōōōōōō31
ƈISO ōōōōōōōōōōōō32
ƈExposure compensation ōōōō32
ƈScene menuōōōōōōōōō33
ƈSpecial Effect : Photo Frame ōō33
ƈSpecial Effect : Motion GIF ōōō34
ƈSpecial Effect : Composite shootingō34
ƈShutter Speed ōōōōōōōō35
ƈAperture Valueōōōōōōōō35
ƈPhoto Gallery modeōōōōōō36
PLAY
ƃStarting play mode ōōōōōō38
ƈPlaying back a still image ōōō38
ƈPlaying back a movie clip ōōō39
ƈMovie clip capture function ōōō39
ƈOn camera movie trimming ōō39
ƈPlaying back a recorded voice memo
or voice fileōōōōōōōōōō39
ƃLCD monitor indicator ōōōōō40
ƃUsing the camera buttons to adjust
the camera ōōōōōōōōō40
ŝ4Ş
ƈPlay mode buttonōōōōōōō40
ƈBACK button ōōōōōōōō40
ƈThumbnail / Enlargement button ō41
ƈStarting the slide show ōōōō41
ƈProtecting images ōōōōōō42
ƈDeleting images ōōōōōōō42
ƈDPOF ōōōōōōōōōōō42
ƈDPOF : STANDARD ōōōōō42
ƈDPOF : Print sizeōōōōōōō43
ƈDPOF : Index ōōōōōōōō43
ƈRotating an image ōōōōōō43
ƈResize ōōōōōōōōōōō44
ƈTrimming ōōōōōōōōōō44
ƈEffectōōōōōōōōōōōō44
ƈMotion GIF ōōōōōōōōō45
ƈPictBridge ōōōōōōōōōō45
ƈPrinter button ōōōōōōōō47
ƈAuto Focus lamp ōōōōōōō50
ƈAuto power off ōōōōōōōō50
ƈQuick view ōōōōōōōōō51
ƈStart up image ōōōōōōōō51
ƈSound Volume ōōōōōōōō51
ƈOperation Sound ōōōōōōō51
ƈStart up sound ōōōōōōōō51
ƈShutter sound ōōōōōōōō52
ƈFormatting a memory ōōōōō52
ƈCopy To Card ōōōōōōōō52
ƈSelecting Video out type ōōōō53
ƈConnecting an External Device
(USB) ōōōōōōōōōōō54
ƈInitialisation ōōōōōōōōō54
ƃImportant notesōōōōōōōō54
ƃWarning indicator ōōōōōōō56
ƃBefore contacting a service centreō56
ƃSpecifications ōōōōōōōō58
SETUP
SOFTWARE
ƃSetup menu ōōōōōōōōō48
ƈOSD set ōōōōōōōōōō49
ƈFile name ōōōōōōōōōō49
ƈLanguage ōōōōōōōōōō49
ƈSetting up the Date / Time / Date type ō50
ƈImprinting the recording date ōō50
ƈLCD brightness ōōōōōōō50
ƃSoftware Notes ōōōōōōōō60
ƃSystem Requirements ōōōōō60
ƃAbout the software ōōōōōō60
ƃSetting up the application software ō61
ƃStarting PC mode ōōōōōōō63
ƃRemoving the removable diskōō65
ƃSetting up the USB Driver for MAC ō66
ƃUsing the USB Driver for MAC ō66
ƃRemoving the USB Driver for
Windows 98SE ōōōōōōōō66
ƃDigimax Masterōōōōōōōō67
ƃFAQ ōōōōōōōōōōōō69
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region.
To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.
< Included items >
Computer
(see p.63)
Camera case
DPOF compatible
printer (see p.42)
Remote control
User manual,
Product warranty
Camera strap
Software CD
(see p.61)
Rechargeable battery
(SLB-0837B)
SD memory card / MMC
(see p.13)
Cradle (SCC-NV2)
PictBridge compatible
printer (see p.45)
AV cable
AC adapter (SAC-45) /
USB cable (SUC-C2)
External monitor (see p.53)
ŝ5Ş
Identification of features
Front & Top
Shutter button
Mode dial
Speaker
Power button
Built-in flash
Self-timer lamp
Remote control sensor
Auto focus lamp
Lens / Lens cover
ſ Instructions for the Built-in flash
- The flash opens automatically when you press
the shutter button down half way.
- Do not open the flash by force.
It may cause breakage of camera.
- When you donŖt use the flash, close the flash to
prevent breakage.
ŝ6Ş
Microphone
Identification of features
Back & Bottom
Camera status lamp
Zoom W button (Thumbnail)
Zoom T button (Digital zoom)
LCD monitor
Smart buttons
Camera strap eyelet
Smart buttons
BACK button
Play mode button
USB / AV connection terminal
Cradle connector
Tripod socket
ŝ7Ş
Identification of features
Bottom
Battery chamber cover
Cradle (Optional)
Battery chamber
ƈ You can recharge your rechargeable battery, transfer a captured image to print,
and download images with the cradle. (Refer to page. 12, p.45, p.64)
ƃ Top
Camera connection terminal
Memory card slot
Battery holder
Battery cover lever
ſ To open the battery chamber cover, slide the battery cover lever in the direction
shown above.
ŝ8Ş
ƃ Back
USB port
DC connection terminal
AV connection
terminal
Identification of features
ƈ Self-timer lamp
Icon
Status
Blinking
Blinking
Blinking
Blinking
Description
- For the first 7 seconds, the lamp blinks at 1 second intervals.
- For the final 3 seconds, the lamp blinks quickly at 0.25second intervals.
For the 2 seconds, the lamp blinks quickly at 0.25-second
intervals before taking a picture
A picture will be taken after about 10 seconds and 2 seconds
later a second picture will be taken.
Pressing the shutter button of remote control will allow an
interval of 2 seconds before the image is taken.
ƈ Mode dial
You can select the desired working mode by using the mode dial located on the
top of the camera.
ƃ AUTO mode
Select this mode for quick and easy picture taking with
minimal user interaction.
ƃ PROGRAM mode
Selecting the program mode will configure the camera
with optimal settings. You can still manually configure all
functions except the aperture value and shutter speed.
ƈ Camera Status Lamp
Status
After taking a picture
Description
The lamp blinks while saving the image and then
turns off when ready to take another picture
ƃ MANUAL mode
While voice memo recording The lamp blinks
When the USB cable is
The lamp lights up
inserted to a PC
(LCD monitor turns off after initializing the device)
Transmitting Data with a PC The lamp turns on (LCD monitor turns off)
When the USB cable is
inserted to a printer
When the printer is printing
When the AF activates
You can manually configure all functions including the
aperture value and shutter speed.
The lamp is off
The lamp blinks
The lamp lights (The subject is in focus)
The lamp blinks (The subject is not in focus)
ƃ ASR mode
Advanced Shake Reduction (ASR) mode. This mode will
reduce the camera shaking and help you get a good
image.
ŝ9Ş
Identification of features
ƃ SPECIAL EFFECT mode
It is possible to add special effects to your images by
using this mode.
ƈ Mode icon
MODE AUTO PROGRAM MANUAL
ASR
SPECIAL
MOVIE PHOTO PLAY
GALLERY
EFFECT
Icon
SCENE
MODE
NIGHT
ƃ SCENE mode
Use the menu to easily configure optimal settings for a
variety of shooting situations.
PORTRAIT
CHILDREN LANDSCAPE CLOSE UP
Icon
MODE
TEXT
SUNSET
DAWN
BACKLIGHT FIREWORKS BEACH & SNOW
Icon
ƃ MOVIE CLIP mode
A movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
Connecting to a Power Source
ƈ You should use the rechargeable battery (SLB-0837B) supplied with the camera.
Be sure to charge the battery before using the camera.
ƈ SLB-0837B rechargeable battery Specification
ƃ PHOTO GALLERY mode
The saved images can be reviewed with music or various
effects in this mode.
ŝ10Ş
Model
Type
Capacity
Voltage
SLB-0837B
Lithium Ion
800mAh
3.7V
Charging time
(When the camera is turned off)
About 130 ~ 150 Min.
Connecting to a Power Source
ƈ Number of images and battery life : Using the SLB-0837B
Still image
Battery life
Number of images
Approx. 90 MIN
Approx. 180
Based
on the
following
shooting
conditions
Using the fully charged battery, Auto
mode, 10M image size,
Fine image quality, Shot to shot interval
: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then Powering it off for 1 minute.
Movie
Recording time
Approx. 90 MIN
Using the fully charged
battery
Based 640X480 image size
on the 30fps frame rate
following
shooting
conditions
ſ These figures are measured under Samsung’s standard conditions and shooting
conditions and may vary depending on the user's methods.
INFORMATION
Important information about battery usage.
ƃ When the camera is not used, turn off the camera power.
ƃ Please remove the battery if the camera will not be used for long periods.
Battery can lose power over time and are prone to leaking if kept inside the
camera.
ƃ Low temperatures (below 0°C) can affect the performance of the battery
and you may experience reduced battery life.
ƃ Battery will usually recover at normal temperatures.
ƃ During extended use of the camera, the camera body may become warm.
This is perfectly normal.
ƈ You can charge the rechargeable battery (SLB-0837B) by using an SAC-45 KIT.
The SAC-45 consists of the AC adapter (SAC-45) and the USB cable (SUC-C2).
When the AC adapter and the USB cable are assembled, it can be used as an
AC cable.
ƃ Using the SAC-45 as an AC charger
: Insert the AC adapter into the USB connector.
When the AC adapter is inserted, it can be used
as an AC charger.
ƃ Using the SAC-45 as an USB cable
: Remove the AC adapter from the USB connector.
You can transmit data with a PC (p.45) or charge
the battery.
CAUTION
In the following cases, the battery may not be charged.
ƃ When using the USB cable that was not supplied with this camera : Use the
supplied USB cable.
ƃ When using the USB hub : Connect the camera to the PC directly.
ƃ When other USB devices are connected to the PC : Disconnect the other
USB devices.
ƃ When the USB is connected to the USB port located on the front of the
computer : Use the USB located on the back of the computer.
ƃ If the USB port of the PC doesn't meet the Power output standard (5V, 500mA),
the camera may not be charged.
ŝ11Ş
Connecting to a Power Source
ƈ You can charge the rechargeable battery (SLB-0837B) by using the cradle.
When you charge the battery with the cradle, you only can use Lithium Ion
battery pack (SLB-0837B).
ƈ How to charge the rechargeable battery (SLB-0837B)
ƃ Charging with the cradle
ƈ Charging LED of the AC Adapter
Being Charged
Charging is complete
Charging error
Being discharged
(Using the AC adapter)
Charging LED
Red LED is on
Green LED is on
Red LED is off or blinking
Orange coloured LED is on
CAUTION
ƃ Charging with the camera
Charging LED
ŝ12Ş
ƃ Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
ƃ If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery is
inserted correctly.
ƃ If you charge the battery with the camera power on, the battery can't charge
fully. Turn the camera off while charging the battery.
ƃ If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. The camera may not be turned on because of the
low battery capacity. Charge the battery for more than 10 minutes before
using the camera.
ƃ Do not use the flash frequently or take a movie clip with a fully discharged
battery that has only been charged for a short time.
Connecting to a Power Source
Instructions on how to use the memory card
ƈ Insert the battery as shown
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
- When the battery chamber cover is
opened, do not press the battery
chamber cover by force. This may
cause damage to the battery chamber cover.
ƃ Be sure to format the memory card (see p.52) if you are using a newly
purchased memory for the first time, if it contains data that the camera cannot
recognise, or if it contains images captured with a different camera.
ƈ There are 4 indicators for battery condition that are displayed on the LCD monitor.
ƃ The memory card is an electronic precision device.
Do not bend, drop or subject it to any heavy impact.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery capacity Low battery capacity Low battery capacity
(Prepare to recharge (Prepare to recharge (Prepare to recharge
or use spare battery) or use spare battery) or use spare battery)
ƃ Turn off the camera power whenever the memory card is being inserted or
removed.
ƃ Repeated use of the memory card will eventually reduce its performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
ƃ Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
ƃ Please do not use or store in an environment where there are extremes in
temperature.
ƃ Do not allow the memory card to become dirty or to come into contact with any
liquid. Should this happen, clean the memory card with a soft cloth.
Inserting the memory card
ƈ Turn off the camera's power before inserting the memory card.
- Insert the memory card as shown.
- Have the front of the memory card
facing toward the back of the camera
(LCD monitor) and the card pins
toward the front of the camera (Lens).
- Do not insert the memory card the
wrong way round. Doing so may
damage the memory card slot.
ƃ Please keep the memory card in its case when not in use.
ƃ During and after periods of extended use, you may notice that the memory card
is warm. This is perfectly normal.
ƃ Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this
camera.
ƃ Do not use a memory card formatted by another digital camera or memory card
reader.
ŝ13Ş
Instructions on how to use the memory card
ƃ If the memory card is subjected to any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording,
deleting (formatting) or reading.
ƃ Samsung cannot be held responsible for lost data.
ƃ It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
ƃ If there is insufficient memory available
: A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory card.
INFORMATION
ƃ Don't remove the memory card when the camera status lamp is blinking as
this may cause damage to data in the memory card.
ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards).
When using MMC cards, please consult the instructions supplied with the cards.
The SD memory card has a write protect
switch that prevents image files from being
deleted or formatted. By sliding the switch
towards the bottom of the SD memory
card, the data will be protected. By sliding
the switch towards the top of the SD
memory card, the data protection will be
cancelled. Slide the switch to the top of the
SD memory card before taking a picture.
Card pins
Write protect
switch
Label
[SD (Secure Digital) memory card]
ƈ When using a 256MB MMC memory, the specified shooting capacity will be as
follows. These figures are approximate as image capacities can be affected by
variables such as subject matter and memory card type.
Recorded image size Super Fine
Still
image
*
Movie
Fine
Normal
30FPS
10M
49
95
139
-
-
7M
66
126
182
-
-
5M
88
167
237
-
-
3M
124
229
319
-
-
1M
451
691
840
-
-
640
-
-
-
00:12:39
00:20:46
320
-
-
-
00:30:27
00:57:36
* The recording times can be changed by the zoom operation.
The zoom button doesn't operate while recording movies.
ŝ14Ş
15FPS
When Using the Camera for the First Time : Smart button
ƈ This button is used for shifting the menu cursor to select or for confirming the
selected menu.
ƈ To select sub menu, in some menus, touch the button and slide your finger to
the left / right.
3648x2736
3136x2352
2688x2016
2240x1680
SIZE
[Selecting the main menu :
Touching the button]
1024x768
[Confirming the main menu :
Pressing the button]
3648x2736
3136x2352
2688x2016
Slow
Fast
[e.g. : Selecting the shutter speed]
ƈ Extending the menus : Press the extension menu button and the more available
menus will display.
2240x1680
1024x768
[Confirming the sub menu :
Pressing the button]
[Selecting the sub menu :
Touching the button]
Pressing the
extension menu
button
ŝ15Ş
When Using the Camera for the First Time : Setting up the Date / Time and Language
ƈ When the camera is turned on for the first time, a menu will be displayed in the
LCD monitor to set date, time and language. This menu will not be displayed
again after setting up the date, time and language. Set up the date, time and
language before using this camera.
ƃ Setting up the date, time and date type
1. Press the [Date&Time] menu button.
2. Select a desired date type by pressing the vertical
smart button.
Ȝ
2006/06/01
yy/mm/dd Ȝ
Language
Date & Time
mm/dd/yy
dd/mm/yy
Off
ƃ Setting up the language
1. Press the [Language] menu button.
2. Select a desired language by pressing the vertical
smart button.
Exit:BACK
ENGLISH Ȝ
Language
Date & Time
FRANÇAIS
DEUTSCH
ह
Exit:BACK
INFORMATION
ƃ You can select any one of 22 languages. These are listed below :
- English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
BAHASA (MALAY / INDONESIAN), Arabic, Polish, Hungarian, Czech and
Turkish.
ƃ Even if the camera is restarted, the language setting will be maintained.
ŝ16Ş
3. To change the date, select the [2006/06/01] menu
and press the vertical smart button.
4. To select Year / Month / Day and Hour : Minute,
press the horizontal smart button. To change the
numbers, press the vertical smart button.
Ɗ
"
ƌ
स
OK
ह
LCD monitor indicator
ƈ The LCD monitor displays information about the shooting functions and selections.
‫ڻ ڼ ڽ‬
‫ں‬
No.
Description
4
Card inserted indicator
Icons
Page
-
5
Battery
p.13
6
Optical / Digital Zoom bar /
Digital Zoom rate
p.21-22
7
Focus mode
p.25
8
Flash
p.25
9
Image size
p.26
10
Shooting mode
p.26
‫ڹ‬
؊
‫ھ‬
؋
؉
؈
‫ۀ‬
‫ہ‬
‫ۂ‬
‫ۃ‬
‫ۄ‬
‫ڿ‬
‫ۅ‬
‫ۆ‬
‫ۇ‬
؅
؆
؇
[Image & Full Status]
No.
Description
1
Recording mode
2
3
Icons
Page
p.9-10
Date / Time
01:00 AM 2006/06/01
Number of available shots remaining
3
Remaining time (Movie clip/ Voice recording)
00:01:00/01:00:00
p.50
p.14
11
Metering
p.27
12
Sharpness
p.27
13
Special Effect
p.28
14
Image quality / Frame rate
p.28
15
Self-timer
p.29
16
Voice Recording / Voice memo
p.30
17
Setup menu
p.48
18
Extension menu
p.15
19
Exposure compensation
p.32
20
ISO
p.32
21
White Balance
p.31
22
Auto focus frame
p.18
ŝ17Ş
Starting the recording mode
ƈ How to use the AUTO mode (
)
Please select this mode for quick and easy picture taking with minimal user
interaction.
1. Insert the battery (p.13) taking note of the correct
polarity (+ / -).
2. Insert the memory card (p.13). As this camera has
a 20MB internal memory, it is not essential to
insert the memory card. If the memory card is not
inserted, an image will be stored in the internal
memory. If the memory card is inserted, an image
will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date / time that is displayed on the LCD
[AUTO mode]
monitor is incorrect, reset the date / time before
taking a picture.)
5. Select the Auto mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using the
LCD monitor.
7. Press the shutter button to capture an image.
INFORMATION
ƃ If the auto focus frame turns to red when you press the shutter button down
half way, it means that the camera cannot focus on the subject. Should this
be the case, the camera is unable to capture an image clearly.
ƈ How to use the PROGRAM mode (
)
Selecting the program mode will configure the
camera with optimal settings. You can still manually
configure all functions except the aperture value and
shutter speed.
1. Select the Program mode by rotating the mode
dial.
2. Press the menu button to configure advanced
functions such as image size (p.26), quality
(p.28), metering (p.27), continuous shooting
(p.26) and special effects (p.28).
[PROGRAM mode]
ſ Refer to page 24-35 for more information about
the menus.
ƈ How to use the Manual mode (
)
You can manually configure all functions with the
aperture value and shutter speed.
1. Select the Manual mode by rotating the mode
dial.
2. Set the aperture value and shutter speed by using
the smart button.
ſ Refer to page 35 for more information about the
menus.
[MANUAL mode]
ŝ18Ş
Starting the recording mode
ƈ How to use the ASR (Advanced Shake Reduction)
mode (
)
Advanced Shake Reduction (ASR) mode.
This mode will reduce the effect of camera shake
and help you get a well-exposed image in dim
conditions.
ƈ How to use the SCENE mode (
)
Use the menu to easily configure optimal settings
for a variety of shooting situations.
Select the Scene mode by rotating the mode dial.
ƃ Things to watch out for using the ASR mode
1. The digital zoom will not operate in the ASR mode.
2. If the lighting conditions are brighter than fluorescent
lighting condition, the ASR doesn’t activate.
3. If the lighting condition is darker than in
[ASR mode]
fluorescent lighting condition, camera shake
warning indicator (
) will display. For best results only take pictures in
situations where the camera shake warning indicator (
) is not displayed.
4. If the subject is moving the final image captured may be blurred.
5. Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
6. As the ASR uses the camera’s digital processor, images taken using the ASR
may take a little longer for the camera to process.
ƈ How to use the Special Effect mode (
)
It is possible to add special effects to your images
by using this mode. Select the Special Effect mode
by rotating the mode dial.
ſ Refer to page 33-35 for more information about
the special effect menus.
[SPECIAL EFFECT mode]
ſ Refer to page 33 for more information about the
menus.
[SCENE mode]
ƈ How to use the MOVIE CLIP mode (
)
A movie clip can be recorded for as long as the
available recording time of the memory capacity
allows.
1. Select the MOVIE CLIP mode by rotating the
mode dial. (Available recording time will display on
the LCD monitor)
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
Press the shutter button and movie clips are
recorded for as long as the available recording
[MOVIE CLIP mode]
time allows. Movie clips will still be recorded if the
shutter button is released.
If you wish to stop recording, press the shutter button again.
* Image size and type are listed below.
- Image size : 640X480, 320X240 (Selectable)
- File type : *.avi (MPEG-4)
ŝ19Ş
Starting the recording mode
Things to Watch Out for When Taking Pictures
ƈ Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
ƈ To record a movie clip without voice
1. Press the extension menu button.
2. Select the [VOICE] ƍ [OFF] menu.
3. Press the shutter button and movie clip is
recorded for as long as the available recording
time without voice allows.
OFF
ON
[MOVIE CLIP mode]
[Lightly press the shutter button]
ƈ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite scenes
into a movie clip without having to create multiple movie clips.
ƃ Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording
time allows. Movie clips will still be recorded if the
shutter button is released.
2. Press the II button to pause recording. Press the
II button again to resume the recording.
3. If you wish to stop recording, press the shutter
button again.
ŝ20Ş
[Successive recording of a
movie clip]
[Press the shutter button]
ƈ The available recording time may vary depending on shooting conditions and
camera settings.
ƈ When either the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator (
) may appear on the LCD
monitor. In this case, use a tripod, support the camera on a solid surface or
change to flash shot mode.
ƈ Shooting against the light :
Please do not take pictures into the sun. Taking a picture against the sun may
make the picture dark. To take a picture against the sun, please use the
[Backlight] in the scene shooting mode (see page 33), fill-in flash (see page 25),
spot metering (see page 27), or exposure compensation (see page 32).
ƈ Avoid obstructing the lens or the flash when you capture an image.
ƈ Compose the image by using the LCD monitor.
ƈ In some of the following conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
Using the camera buttons to set the camera
ƈ The recording mode function can be set up by using the camera buttons.
ZOOM W / T button
ƃ If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.
POWER button
ƃ Used for turning the camera’s power on / off.
ƃ If there is no operation during the specified
time, the camera's power will be turned off
automatically to save battery life.
Refer to page 50 for more information about
the auto power off function.
Shutter button
ƃ Used for taking an image or recording voice in
the RECORDING mode.
ƃ In MOVIE CLIP mode :
Pressing the shutter button down fully starts
the process for recording a movie clip.
Press the shutter button once and the movie
clip is recorded for as long as the available
recording time in the memory allows. If you wish to stop recording, press the
shutter button again.
ƃ In STILL IMAGE mode :
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and stores
the image. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
ƃ This camera has a 3X optical zoom and a 5X digital zoom function.
Using both will offer a total zoom ratio of 15X.
ƃ TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the
subject i.e. the subject will appear nearer.
Digital zoom TELE : When the maximum (3X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
[WIDE zoom]
[TELE zoom]
[Digital zoom 5X]
ŝ21Ş
ZOOM W / T button
ƃ WIDE Zoom
INFORMATION
Optical zoom WIDE
: Pressing the ZOOM W button. This will zoom out from
the subject i.e. the subject will appear farther away.
Pressing the ZOOM W button continuously will set the
camera to its minimum zoom setting i.e. the subject
appears at its farthest from the camera.
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[TELE zoom]
[Optical zoom 2X]
[WIDE zoom]
Digital zoom WIDE
Digital
zoom
: When the digital zoom is in operation, pressing the
ZOOM W button will reduce the digital zooming in steps.
Releasing ZOOM W button stops digital zooming.
Pressing the ZOOM W button will reduce the digital
Optical zoom and then it will continue to reduce the optical
zoom zoom until the minimum setting is reached.
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[Digital zoom 5X]
ŝ22Ş
[TELE zoom]
[WIDE zoom]
ƃ Images taken using the digital zoom may take a little longer for the camera
to process. Allow time for this to take place.
ƃ You may notice a decrease in image quality when using the digital zoom.
ƃ To view a clearer digital zoom image, press the shutter button halfway at the
maximum optical zoom position and press the zoom T button again.
ƃ The digital zoom can’t be activated in the ASR, High Speed, Motion Capture
mode, [Night], [Children], [Text], [Close up] and [Fireworks] scene modes.
ƃ Take care not to touch the lens to avoid taking an unclear image and
possibly causing camera malfunction. If the image is dim, turn the camera
power off and on again to modify the lens position.
ƃ Take care not to press the lens as this may cause a camera malfunction.
ƃ When the camera is turned on, take care not to touch the camera's moving
lens parts as this may cause the resulting image to be dim and unclear.
ƃ You can operate the Wide and Tele zoom by using the remote control.
Using the LCD monitor to set the camera settings
ƈ You can use the menu on the LCD monitor to set up recording functions.
(O : Selectable, X : Not selectable, - : Partly selectable)
MENU
page
COLOR
O
X
X
X
X
X
X
p.24
BRIGHT
O
X
X
X
X
X
X
p.24
NORMAL
O
FOCUS AUTO MACRO
MACRO
SIZE
O
O
O
X
O
O
O
X
O
X
X
X
X
X
O
X
O
X
O
O
O
O
O
O
O
O
O
SINGLE
X
O
O
O
O
O
X
CONTINUOUS
X
O
X
X
X
O
X
SHOOTING HIGH SPEED
X
O
X
X
X
O
X
MOTION CAPTURE
X
O
X
X
X
O
X
AEB
X
O
X
X
X
X
X
O
O
O
O
O
O
O
QUALITY
FLASH
p.25
p.26
p.26
page
MENU
METERING
OFF
O
O
O
O
-
SLOW SYNC
X
O
X
O
FILL IN
X
O
X
O
RED EYE
O
O
X
O
X
-
X
X
-
O
X
-
X
X
AUTO
X
O
X
O
-
X
X
MULTI
X
O
X
O
X
O
O
X
O
X
O
X
O
O
X
O
X
O
X
O
O
X
O
X
O
X
O
X
p.27
X
X
X
O
X
X
X
p.33
X
X
X
O
X
X
X
p.34
X
X
X
O
X
X
X
p.34
NORMAL
X
O
X
O
X
O
O
O
O
O
O
O
O
O
O
B&W
X
O
X
O
X
O
Double
O
O
O
O
O
O
X
SEPIA
X
O
X
O
X
O
O
2SEC
O
O
O
O
O
O
X
B
X
O
X
O
X
O
O
10SEC
O
O
O
O
O
O
O
R
X
O
X
O
X
O
O
OFF
O
O
O
O
O
O
O
p.29
VOICE
O
O
O
O
O
O
O
p.30
W/B
X
O
X
X
X
O
O
p.31
ISO
X
O
X
X
X
O
X
p.32
EV
X
O
X
X
X
X
O
p.32
EFFECT
p.27
SPOT
REMOTE
TIMER
p.25
CENTER
SHARPNESS
PHOTO FRAME
M.GIF
COMPOSITE
p.28
O
G
X
O
X
O
X
O
O
NEGATIVE
X
O
X
O
X
O
O
CUSTOM
X
X
X
O
X
X
X
p.28
ſ Menus are subject to change without prior notice.
ſ The selectable menus may vary in each scene modes.
ŝ23Ş
Color tone
Brightness
ƈ You can add color tone on the captured image.
Warm menu will increase red color of the image.
Cool menu will increase blue color of the image.
ƈ You can change the brightness of the image.
COLOR
ƃ Selecting the color tone
To select the color tone, touch the button and slide your finger to the left or right.
[Emphasizing the Cool-color]
ŝ24Ş
[Emphasizing the Warm-color]
BRIGHT
ƃ Changing the brightness
To select the brightness, touch the button and slide your finger to the left or right.
[Dark]
[Bright]
Selecting focus type
ƈ You can select the focus type in accordance with
the subject distance.
The distance ranges are show below.
Flash
ƈ You can select the flash type in accordance with
the subject distance.
The distance ranges are show below.
NORMAL(AF)
MACRO
ƈ During the ASR, Continuous shot, High Speed
Continuous shot, Motion Capture, AEB, Movie clip
mode and Scene modes except for the Night,
Portrait, Children scene modes, the flash will not
operate.
ƈ Flash range (W : Wide, T : Tele)
ISO
[Auto]
[Macro]
[Auto Macro]
ƃ Types of focus modes and focus ranges (W : Wide, T : Tele)
Focus Type
Focus range
Normal
W:80-Infinity
T:80-Infinity
Macro
W:4-80
T:50-80
(Unit : cm)
Auto macro
W:4-Infinity
T:50-Infinity
INFORMATION
ƃ When the macro mode is selected, it is possible that camera shake will
occur. Take care not to shake the camera while taking a picture.
ƃ When you take a picture within 40cm in the Macro mode, select the FLASH
OFF mode.
AUTO
Normal
W:0.8-4.5
T:0.8-2.5
AUTO
RED EYE
FILL IN
SLOW SYNC
OFF
(Unit : m)
Macro
W:0.4-0.8
T:0.5-0.8
Auto macro
W:0.4-4.5
T:0.5-2.5
INFORMATION
ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move the camera until the second flash fires.
ƃ Using the flash frequently will reduce the life of the battery.
ƃ Under normal operating conditions the charging time for the flash is usually
within 4 seconds. If the battery is weak, the charging time will be longer.
ƃ Take photographs within the flash range.
ƃ The image quality is not guaranteed if the subject is too close or highly reflective.
ƃ When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the atmospheric dust. It is not camera malfuction.
ƃ Do not open the Built-in flash by force. It may cause breakage of the flash.
ŝ25Ş
Size
Continuous shot
ƈ You can select the image size appropriate for your application.
Mode
Still image mode
Movie clip mode
Icon
Size
640
320
3648X
3136X
2688X
2240X
1024X
640X
320X
2736
2352
2016
1680
768
480
240
3648x2736
3136x2352
2688x2016
2240x1680
640x480
1024x768
320x240
[STILL IMAGE mode]
[MOVIE CLIP mode]
INFORMATION
ƃ The higher the resolution, the lower the number of shots available because
high resolution images require more memory.
ŝ26Ş
ƈ You can select type of shooting and number of continuous shot.
- SINGLE
: Take one picture only
AEB
- CONTINUOUS : Images will be taken continuously
M. CAPTURE
HIGH SPEED
until the shutter button is released.
CONTINUOUS
The shooting capacity depends on
SINGLE
the memory.
- HIGH SPEED : This takes 3 shots continuously
(2.5 shots per second) when the
[Still image mode]
shutter is pressed down and held.
- M. CAPTURE : This takes 7 shots per second, when the shutter is pressed
down and held. After completing the continuous shooting,
images are saved and the images play back on the Rear
LCD. The maximum number of shots is 20 and the image
size is fixed as 1024X768.
- AEB : Take three pictures in a series in different exposures: standard exposure
(0.0EV), short exposure (-0.5EV) and over exposure (+0.5EV).
Use the mode if it is hard to decide exposure of the object.
ſ High resolution and picture quality increases file saving time, which increases
stand-by time.
ſ If the [CONTINUOUS], [HIGH SPEED], [M. CAPTURE] or [AEB] sub menu is
selected, the flash will be off automatically.
ſ It is best to use a tripod for the AEB shooting as the time to save each image
file is longer and blurring caused by camera shake may occur.
ſ When the [M.CAPTURE] menu is selected, you only can select ISO 400,
800, 1000.
Metering
ƈ If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
- MULTI
: Exposure will be calculated based on
an average of the available light in the
MULTI
image area. However, the calculation
SPOT
will be biased towards the centre of the
CENTER
image area. This is suitable for general
use.
[PROGRAM mode]
- SPOT : Only the rectangular area in the centre
of the LCD monitor will be metered for
light. This is suitable when the subject in the centre is exposed
correctly, regardless of the back lighting.
- CENTER : Exposure will be calculated based on an average of the available
light in the image area. However, the calculation will be biased
towards the centre of the image area. This is suitable for taking a
picture of small object like a flower or insects.
ſ If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.
Sharpness
ƈ You can adjust the sharpness of the picture you
want to take. You cannot check the sharpness effect
on the LCD monitor before you take a picture,
because this function is applied only when the
captured image is stored on the memory.
SOFT
NORMAL
VIVID
[PROGRAM mode]
Sub menu
SOFT
NORMAL
VIVID
Icon
Description
The edges of the image are softened.
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized.
The edges will appear sharp, but noise may occur in
the recorded image.
ŝ27Ş
Effect
Quality / Frame rate
ƈ By using the camera’s digital processor, it is possible to add special effects to
your images
: No effect is added to the image
BLUE
: Captured images will be stored in black and
SEPIA
white.
B&W
NORMAL
: Captured images will be stored in a sepia tone
(a range of yellowish brown colours).
: Captured images will be stored in a blue tone.
[Program mode]
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Save the image in negative mode.
: User can set the tone of the R (Red), G (Green) and B (Blue) value.
These menus can be selected in the Special Effect mode only.
ƃ How to use the Custom Effect (
Still image mode
Mode
Movie clip mode
Icon
Sub menu
Super Fine
Fine
Normal
30FPS
15FPS
File Type
jpeg
jpeg
jpeg
avi
avi
SUPER FINE
FINE
30 FPS
NORMAL
15 FPS
)
1. Select the [CUSTOM] effect menu
by using the Smart button.
2. Select the R, G or B menu by using
the Smart button.
[STILL IMAGE mode]
[MOVIE CLIP mode]
INFORMATION
CUSTOM
NEGATIVE
ƃ This file format complies with the DCF (Design rule for Camera File system).
ƃ JPEG (Joint Photographic Experts Group) : JPEG is the image
compression standard developed by the Joint Photographic Experts Group.
This type of compression is most commonly used for compressing photos
and graphics because it can compress the files efficiently.
GREEN
RED
Select:
Exit:BACK
3. Select a desired value by using the Smart button.
;MTMK\"
ŝ28Ş
ƈ You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture quality.
Exit:BACK
Self-timer / Remote control
ƈ This function is used when the photographer would also like to be in the picture.
- Selecting a self-timer :
OFF
When you press the Shutter button, the picture will
10 sec
2 sec
be taken after the specified time has elapsed and
DOUBLE
the self-timer function will be cancelled.
REMOTE
- Selecting a remote mode :
Pressing the shutter button of remote control will
allow an interval of 2 seconds before the image is
taken. After taking a picture, the remote mode will
be maintained. But, pressing the Power button will cancel the remote mode.
ƃ Remote control range
When you take a picture by using the remote control,
refer to the illustrations shown alongside about the
remote control range.
[Shutter button on
the remote control]
ƃ Replacing battery for the remote control
ƃ Description of Self-timer / Remote mode
Icon
Mode
Description
10s
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
2s
Pressing the shutter button will allow an interval of
2 seconds before the image is taken.
Double
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Remote
You can take a picture by remote control instead of using
the shutter button of the camera.
Make sure the + (positive) polarity is toward the top and the - (negative) polarity is
toward the bottom while installing battery for the remote control. Replace battery for
the remote control in the local service centre. Use the CR 2025 3V battery.
INFORMATION
ƃ When taking a picture using the self-timer, the self-timer lamp works as follows :
2 second self-timer setting : The self-timer lamp blinks at 0.25 second
interval for 2 seconds.
10 second self-timer setting : The self-timer lamp blinks at 1 second interval
for the first 7 seconds. It blinks at 0.25 second
interval for the remaining 3 seconds.
ƃ If you operate the Play mode button during the self-timer operation, the selftimer function is canceled.
ƃ Use a tripod to prevent camera shake.
ŝ29Ş
Voice recording / Voice memo
ƈ A voice can be recorded for as long as the available
recording time of the memory capacity allows. And
you can add your voice-over to a stored still image.
OFF
MEMO
RECORD
ƃ Voice recording
1. Select a recording mode with the exception of the
Movie clip mode by rotating the mode dial.
OFF
2. Select the Voice recording menu by using the
MEMO
smart button.
RECORD
3. Press the shutter button to record a voice.
- Press the shutter button once and voice is
recorded for as long as the available recording
time allows. The recording time will be displayed on the LCD monitor. Voice
will still be recorded if the shutter button is released.
- If you wish to stop recording, press the shutter button again.
- File type : *.wav
ŝ30Ş
ƃ Voice memo
1. Select a recording mode with the exception of the
Movie clip mode by rotating the mode dial.
OFF
2. Select the Voice memo menu by using the smart
MEMO
button. If the voice memo indicator is displayed on
RECORD
the LCD monitor, the setting is completed.
3. Press the shutter button and take a picture.
The picture is stored on the memory card.
4. Voice memo will be recorded for ten seconds from the moment the picture is
stored. In the middle of the sound recording, pressing the shutter button will
stop the voice memo.
INFORMATION
ƃ A distance of 40cm between you and the camera (microphone) is the best
distance to record sound.
White balance
ƈ The white balance control allows you to adjust the colours to appear more
natural. When a menu except the AWB (Auto White Balance) is selected, you
can only select the negative color effect.
AUTO
: The camera automatically
selects the appropriate
white balance settings,
depending on the
prevailing lighting
conditions.
DAYLIGHT
: For taking images outside.
CLOUDY
: For taking images under a
cloudy and overcast sky.
Fluorescent H
: For shooting under daylight fluorescent types of three
way fluorescent lighting.
Fluorescent L
: Shooting under white fluorescent lighting.
TUNGSTEN
: For shooting under tungsten (standard light bulb)
lighting.
CUSTOM
: Allows the user to set the white balance according to the
shooting condition.
Different lighting conditions may cause a colour cast on your images.
ƃ Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for a
given shooting environment by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the
White Balance and place a sheet of white
paper in front of the camera so that the LCD
monitor shows only white.
2. OK menu button : selects pre-saved custom
ٌ
white balance.
[White paper]
BACK button
: cancels the custom white
balance.
Shutter button : stored the new custom white balance.
- The custom white balance value will be applied, starting with the next picture
you take.
- The user configured white balance will be remain effective until it is
overwritten.
ŝ31Ş
ISO
ƈ You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated in ISO numbers.
- AUTO :
The camera's sensitivity is automatically changed
by variables such as lighting value or subject
brightness.
- 100, 200, 400, 800, 1000 :
You can increase the shutter speed while the
same amount of light is present, by increasing the
ISO sensitivity. However, the image may be saturated in high luminance.
The higher the ISO value, the greater is the camera’s sensitivity to light;
therefore it has a greater capacity for taking pictures in darker conditions.
However, the noise level in the image will increase as the ISO value increases,
making the image appear coarse.
ſ When the [M.CAPTURE] menu is selected, you only can select ISO 400,
800, 1000.
ŝ32Ş
Exposure compensation
ƈ This camera automatically adjusts the exposure according to the ambient
lighting conditions. You can also select the exposure value by using the + / button.
ƃ Compensating Exposure
1. Press the exposure compensation menu button
and the exposure compensation menu bar will
appear as shown.
2. Touch the button and slide your finger to select
the exposure value.
3. Press the exposure compensation menu button
again. The value you set will be saved and the
Exposure Compensation setup mode will close.
ſ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure
and the LCD monitor will appear white or you may not get good pictures.
Scene menu
ƈ Use the menu to easily configure optimal settings for a variety of shooting
situations.
ſ The scene modes are listed below.
[NIGHT] (
)
: Use this for shooting still
images at night or in
other dark conditions.
[PORTRAIT] (
)
: To take a picture of a
person.
[CHILDREN] (
)
: To take a picture of fast
moving objects, for example, children.
[LANDSCAPE] (
) : To take pictures of distant scenery.
[CLOSE UP] (
)
: Close-up shooting for small objects such as plants
and insects.
[TEXT] (
)
: Use this mode to shoot a document.
[SUNSET] (
)
: For taking pictures of sunsets.
[DAWN] (
)
: Daybreak scenes.
[BACKLIGHT] (
)
: For portraits without shadows caused by backlighting.
[FIREWORK] (
)
: Firework scenes.
[BEACH&SNOW] (
) : For ocean, lake, beach and snow scape scenes.
Special Effect : Photo Frame
ƈ You can add 9 types of frame-like borders to a still
image you want to capture.
ƈ Date & Time information will not be printed on the
stored image taken with Photo Frame menu.
: The photo frame is not inserted.
ŝ33Ş
Special Effect : Motion GIF
Special Effect : Composite shooting
ƈ You can make Motion GIF with captured images.
Motion GIF : Taking images continuously and save them in a file. This file
supports animation.
ƃ How to make the Motion GIF
1. Select the Special Effect mode by rotating the
mode dial.
2. Press the Motion GIF menu button.
3. Select the image size and FPS (Frame Per Second).
4. Press the Shutter button to take pictures.
(Max. 50 images)
5. Press the OK menu button to save the image.
The images saved as a motion GIF file.
400X300
5 FPS
320X240
2 FPS
ƈ You can combine 2, 3, or 4 different shots in a still image
-
: Cancels the composite shooting
: 2 different shots are combined in a still
image.
: 3 different shots are combined in a still
image.
: 4 different shots are combined in a still
image.
: 2 different panorama shots are combined in a still image.
ſ Selecting 2 composite shooting
Pressing
the shutter
button
[Ready for taking]
[Selecting FPS]
[Selecting image size]
Capture:SH
Del:Back
[First shot]
Pressing
the shutter
button
Save:OK
Del:Back
[Second shot]
Pressing
the OK
menu button
[The final picture]
[Taking pictures]
INFORMATION
Save:OK
Cancle:BACK
[Pressing the OK menu button]
INFORMATION
ƃ As the GIF file format has limitation of shades, image quality can be decreased.
ŝ34Ş
ƃ You can use the flash, self-timer, macro focus, voice memo functions and
the Zoom W / T button during the composite shooting.
ƃ If you press the Play mode button or rotating the mode dial during the
composite shots, each camera working mode is executed. The images
captured before will be deleted.
ƃ After taking the last composite shooting, press the OK button. And then the
voice memo will start.
Special Effect : Composite shooting
ƃ Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
1. During the composite shots, press the BACK button.
2. A previous image will be deleted and new frame will display. If there is an
image taken before, press the BACK button again and a previous image will
be deleted again.
Shutter Speed
ƈ This mode will set the shutter speed for automatic
exposure. High Shutter speeds can capture a
moving object in a still image as if the object is not
moving. Low Shutter speeds can capture a moving
object with an ‘active’ effect.
ƃ Setting up the shutter speed
To select the shutter speed, touch the button and slide your finger to the left or
right.
Capture:SH
Del:Back
Pressing the BACK button
[Before taking the 3rd shot]
Capture:SH
Del:Back
[Moving backward to the 2nd shot]
3. Press the shutter button to capture a new image.
Slow
Fast
ƃ Changing a part of composite shot after taking the last shot
1. After taking the last shot, a menu will display as
shown.
2. Select an image to delete by using the Smart
button.
3. Press the BACK button and the selected image is
deleted.
4. Press the Shutter button to take an image again.
5. Press the OK button and the image is saved.
Aperture Value
Save:OK
Del:BACK
ƈ This mode will set the aperture value for automatic
exposure. Smaller Aperture values make the object
sharp but blur the background. Larger Aperture
values make both the object and background sharp.
ŝ35Ş
Photo Gallery mode
ƈ When the images play back, you can add play back effect and listen a B.G.M.
Only still images can be played back. Movie, Voice files are not played back.
ƈ Selecting a play back mode
1. Select the Photo Gallery mode by rotating
the mode dial.
Edit:
2. Press the Play mode button and menus as
shown will display.
: Play back by album
: Play back by date
3. Press the Smart button to select a desired play back mode.
ŝ36Ş
ƈ Album mode : Images play back by album.
If a memory card is not inserted, Personal / Family / Friend / Event albums can't
be selected. All of images saved in the internal memory play back.
ƃ Selecting an album
You can select an album by using the smart button.
Before selecting an album, insert images into
albums (p.37).
: All images save in the memory play back.
: Images saved in the Personal album play back.
: Images saved in the Family album play back.
: Images saved in the Friends album play back.
: Images saved in the Events album play back.
Edit:
Photo Gallery mode
ƃ Adding images in an album
Press the Album menu button and the menus
shown below will display.
ƃ Playing back an album
Press the slide show menu button.
Edit:
Edit:
- Moving cursor / Selecting an image
: Smart button (Horizontal)
- Selecting images : Pressing the smart button
Images you want can be selected at a time.
- Selecting / Cancelling an album : Each album button
: Adding images in the Personal album.
: Adding images in the Family album.
: Adding images in the Friends album.
: Adding images in the Events album.
Select:
View:BACK
100-0001
: Starting the slide show
: Selecting an effect of the slide show
: Setting play interval
: Selecting a B.G.M
A B.G.M can be played back with images.
Only a saved music can be selected.
You can’t add any music on the B.G.M list.
: Selecting play back time
[Play] : The slide show is closed after one cycle.
[Repeat Play] : The slide show is repeated until cancelled.
- Moving to previous menu : BACK button
ŝ37Ş
Photo Gallery mode
ƃ Rotating an image
You can rotate an image to a direction you want.
Press the horizontal smart button.
Touch the smart button and the selected image is
rotated. Press the smart button and the rotated
image information will be saved.
Starting play mode
Edit:
: rotates the image clockwise.
: rotates the image anticlockwise.
ƈ Turn the camera on and select Play mode by pressing the play mode button
(
). The camera can now play back the images stored in the memory.
ƈ You can set up the PLAY mode function by using the camera buttons and LCD
monitor.
ƈ If the memory card is inserted in the camera, all the camera functions apply only
to the memory card.
ƈ If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.
ƃ Playing back a still image
1. Select the PLAY mode by pressing the
play mode button (
).
2. The last image stored on the memory is
displayed on the LCD monitor.
ƈ Date mode : When an image is taken, date information is also recorded.
In date mode, images play back by the date.
ƃ Selecting a date
You can select a date by using the smart button.
ſ Usage of the menu of the date mode is same as
album mode. Refer to p.37 for more information.
Edit:
3. Touch the button and slide your finger to
the left or right to select an image.
Edit:
ſ After selecting an image, press the button
marked with an arrow. The images will be
played back continuously.
Edit:
INFORMATION
ƃ Manner mode : Pressing the play mode button for more than 3 seconds
changes the buzzer and start-up sound setting to OFF,
even though you may have set these to ON.
ŝ38Ş
Starting play mode
ƃ Playing back a movie clip
1. Select the recorded movie clip that you want to
play back by using the smart button.
2. Press the horizontal smart button and menus for
movie will display.
3. Press the Ȟ button to play back a movie clip file.
- To pause a movie file while playing it back,
press the II button again.
- Pressing the Ȟ button again will cause the
movie clip file will restart.
- To rewind the movie clip while it is playing,
press the ȜȜ button. To fast forward the
movie clip, press the ȞȞ button. Whenever the
ȜȜȞȞ button is pressed, the search speed
will be increased to 2X, 4X, 8X or 16X.
- To stop playback of the movie clip, press the ְ button.
4. Press the BACK button and the menu will disappear.
ƃ On camera movie trimming : You can extract desired frames of movie clip during
the movie clip play back.
Play:
ƃ Movie clip capture function : capture still images from the movie clip.
1. Press the II menu button while playing back a
movie file.
2. Press the Capture menu button. The captured
image is saved under a new file name.
1. Press the extract menu button at the point of the
Trimming?
movie clip that you want to start extracting.
Yes
2. Press the extract menu button at the point of the
No
movie clip that you want to stop extracting.
3. A confirmation window will display.
4. Press the smart button to select a desired sub
menu.
[Yes] : The extracted frames are saved as a new file name.
[No] : The movie trimming will cancel.
ƃ Playing back a recorded voice memo or voice file
1. Select the recorded voice that you want to play
back by using the smart button.
2. Press the horizontal smart button; menus for voice
will display.
3. Press the Ȟ button to play back a voice clip file.
- To pause a voice file while playing it back, press
the II button again.
- Pressing the Ȟ button again will cause the voice file to restart.
- To rewind the voice while it is playing, press the ȜȜ button. To fast forward
the voice, press the ȞȞ button.
- To stop playback of the voice, press the ְ button.
- When an image that has voice memo displays,
icon will display on the
LCD monitor. Press the Smart button and you will find
for playing back
the Voice memo. Press the menu button and then the voice plays back.
ŝ39Ş
LCD monitor indicator
Using the camera buttons to adjust the camera
ƈ The LCD monitor displays shooting information about the displayed image.
‫ۃ‬
ƈ In Play mode, you can use the buttons on the camera to conveniently set up the
Play mode functions.
Play mode button
‫ڹ‬
ƈ If you have turned on the camera by pressing the POWER button, you can press
the PLAY MODE button once to switch to Play mode and press it again to switch
to Recording mode.
‫ۂ‬
‫ہ‬
‫ں‬
‫ۀ‬
ISO:200
AV:F2.8
TV:1/30
FLASH:OFF
3648X2736
2006.06.01
‫ھ‬
Edit:
‫ڻ‬
No.
1
2
3
4
5
6
7
8
9
10
Description
Battery
Recording Information
Slide Bar
Fn menu : Press the smart button
Setup menu
DPOF menu
Delete menu
Protect menu
Slide show menu
Play back mode icon
11
Folder name and Stored
image number
ŝ40Ş
ƈ You can turn the power on with the play mode button. The camera is turned on
in play mode. Press the play mode button again to turn off the camera.
‫ڿ‬
‫ڼ‬
Icon
100-0001
‫ڽ‬
Page
p.13
p.48
p.42
p.42
p.42
p.41
p.49
ISO:200
AV:F2.8
TV:1/30
FLASH:OFF
3648X2736
2006.06.01
ISO sensitivity
Aperture value
Shutter speed
Whether or not the flash is used
Size
Recording date
Edit:
BACK button
ƈ When the menus are displayed the BACK
button allows you to return to the previous
screen, and will eventually bring you out of the
menu system.
ƃ The maximum enlargement rate in proportion to the image size.
Image size
10M
7M
5M
3M
1M
Maximum enlargement rate
X11.4
X9.8
X7.0
X7.0
X2.66
Thumbnail (
) / Enlargement (
) button
ƃ You can view multiple pictures, enlarge a selected picture, and crop and save a
selected area of an image.
ƃ Thumbnail display
1. While an image is displayed on full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that
had been showing at the time the thumbnail mode
was selected.
3. Use the smart button to move to a desired image.
4. To view an image separately, press the enlargement button.
Edit:
[Normal display mode]
Pressing the enlargement
button (
)
ƈ Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
To start the slide show, press the Start menu button.
Movie file, Voice file and GIF file won't be displayed.
ISO:200
AV:F2.8
TV:1/30
FLASH:OFF
3648X2736
2006.06.01
Pressing the thumbnail
button (
)
ISO:200
AV:F2.8
TV:1/30
FLASH:OFF
3648X2736
2006.06.01
Starting the slide show
Edit:
ƃ Configure slide show effects : Unique screen effects can be used in the slide
show.
Select:
Full:T
[Thumbnail display mode]
ƃ Image enlargement
1. Select an image that you want to enlarge and press
the enlargement button.
2. Different parts of the image can be viewed by using
the smart button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image enlargement
indicator shown at the bottom left of the LCD
monitor. (If the image is not an enlarged view, the
indicator will not be displayed.) You can also
check the area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
: The image slides regularly (from Effect1 to Effect 3).
: Image moves from the top left.
: Image is displayed slowly from the center
outwards.
: The next image overspreads the previous image.
Mix
Effect 3
Effect 2
Effect 1
Off
ƃ Setting play interval : Set the slide show play interval.
10 sec
5 sec
3 sec
1 sec
ƃ Repeat Option : Selecting the repeat option for the slide
show.
[ONE PLAY]
: The slide show is closed after one
cycle.
[REPEAT PLAY] : The slide show is repeated until
cancelled.
REPEAT PLAY
ONE PLAY
ŝ41Ş
Protecting images
DPOF
ƈ This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
ONE : Protect / release displayed image.
ALL : Protect / release all saved images
ONE ALL
- If you protect an image, the protect icon will be
displayed on the LCD monitor. (An unprotected image
has no indicator)
- An image in LOCK mode will be protected from the
delete function, but will NOT be protected from the
format function.
ISO:200
AV:F2.8
TV:1/30
FLASH:OFF
3648X2736
2006.06.01
DPOF : STANDARD
Edit:
Deleting images
ƈ Of all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted. Remember that this will permanently delete
unprotected images. Important shots should be stored on a computer before
deletion takes place. The startup image and SKIN image are stored in the
camera's internal memory (i.e., not on the memory card) and it will not be
deleted even if you delete all files on the memory card.
ONE : deletes displayed image.
ALL : deletes all saved images
- The protected images can’t be deleted
- If there aren’t any protected images, all images are
deleted and a [No Image!] message will display.
ŝ42Ş
ƈ DPOF (Digital Print Order Format) allows you to embed printing information on
your memory card’s MISC folder. Select the pictures to be printed and how
many prints to make.
ƈ The DPOF indicator will display on the LCD monitor when an image that has
DPOF information plays back. Images can then be printed on DPOF printers, or
at an increasing number of photo labs.
ƈ This function is not available for Movie clips and Voice recording files.
ƈ If a memory card is not inserted, the menus are still displayed in the LCD, but are
not selectable.
ƈ This function allows you to embed print quantity information on a stored image.
1. Select the [IMAGES] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart
button.
[ONE PICS] : Select a number of prints of
displayed image.
[ALL PICS] : Configure number of prints for all
pictures except movie and voice
files.
[CANCEL] : Cancel the print setup.
3. Press the OK button to confirm the setting. If an
image carries DPOF instructions, the DPOF
indicator (
) will show.
ISO:200
AV:F2.8
TV:1/30
FLASH:OFF
3648X2736
2006.06.01
Edit:
ONE ALL
30 Images
DPOF : Print size
Rotating an image
ƈ You can specify the print size when printing images stored on the memory card.
The [SIZE] menu is available only for DPOF 1.1 compatible printers.
ƃ Setting the Print Size
1. Select the [SIZE] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart button.
[ONE PICS] : Select a print size of displayed image.
[ALL PICS] : Change print size of all saved images.
[CANCEL] : Cancel all of the print size settings.
3. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF
indicator will show.
ƈ You can rotate the stored images by various degrees.
Once the playback of the rotated picture is finished, it
will switch back to the original state.
1. Press the smart button (horizontal).
2. Press the [ROTATE] menu button.
3. Select a desired sub menu by pressing the smart
button.
RIGHT 90ŭ
LEFT 90ŭ
180ŭ
Cancel
ſ DPOF [SIZE] secondary menu : Cancel, 3X5, 4X6,
5X7, 8X10
ſ Depending on the manufacturer and printer model,
cancelling the printing may take a little longer for the printer to process.
[Before rotating the image]
[Right 90°]
[Left 90°]
[180°]
4. If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
DPOF : Index
ƈ Images (except for movie clips and voice file) are printed as index type.
1. Select the [INDEX] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart
button.
If [NO] is selected : Cancel the index print setting.
If [YES] is selected : The image will be printed in
index format.
NO
YES
ŝ43Ş
Resize
Trimming
ƈ Change the resolution (size) of pictures taken. Select [User image] to save an
image to be the start-up image. The resized image will have a new file name.
1. Press the smart button (horizontal).
2. Press the [RESIZE] menu button.
3. Select a desired sub menu by pressing the smart
button.
3136x2352
ƈ You can extract part of the image that you want and save it separately.
1. Select an image that you want to enlarge and
press the enlargement button.
2. Press the smart button (horizontal).
3. Press the [TRIM] menu button.
4. Press the smart button. The trimmed image will
save as a new file name, and display on the LCD
monitor.
To cancel the trimming, press the BACK button.
2688x2016
2240x1680
1024x768
START IMAGE
ƃ Image Resize Types
Size
10M
7M
5M
3M
1M
3136X2352 2688X2016 2240X1680
O
O
O
X
O
O
X
X
O
X
X
X
X
X
X
1024X768
O
O
O
O
X
START IMAGE
O
O
O
O
O
INFORMATION
ƃ You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
ƃ The resized image will have a new file name. The [START IMAGE] image is
stored not on the memory card but on the internal memory.
ƃ Only one [START IMAGE] image can be saved. If you save a new [START
IMAGE], the existing startup image will be deleted.
ƃ If the memory capacity is insufficient to store the resized image, a [Memory
Full!] message will display on the LCD monitor and the resized image will
not be stored.
ŝ44Ş
ſ If there is not enough memory space to save the
trimmed image, the image can't be trimmed.
ſ To delete the enlarged image during the trimming
function, press the delete button.
Trim:
Cancel:BACK
Effect
ƈ By using the camera’s digital processor, it is possible to add special effects to
your images.
1. Press the smart button.
2. Press the [EFFECT] menu button.
3. Select a desired sub menu by using the smart button.
: No effect is added to the image
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone
(a range of yellowish brown colours).
: Captured images will be stored in a blue tone.
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Save the image in negative mode.
RED
BLUE
SEPIA
B&W
Motion GIF
PictBridge
ƈ You can make Motion GIF with captured images. Motion GIF : Taking images
continuously and save them in a file. This file supports animation.
ƃ How to make the Motion GIF
1. Press the vertical smart button.
ISO:200
AV:F2.8
TV:1/30
FLASH:OFF
3648X2736
2006.06.01
ƈ You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
ƃ Setting up the camera for connection to a printer
2. Press the Motion GIF menu button.
1. Press the Setup menu button and press the F4
menu button.
2. Select the [USB]-[Printer] menu by using the
smart button.
Computer
Format
Printer
Copy to Card
Video Out
USB
Ȝ
Reset
Exit:BACK
Edit:
ƈ Connecting the Camera to a Printer
ƃ Using the USB cable with Cradle (Optional) :
Connect the camera and the cradle. Connect the cradle to a printer’s USB
port with the supplied USB cable.
3. Select the image size and FPS (Frame Per Second).
4. Select desired images by using the smart button.
ƃ Using the USB cable with Camera :
Connect the camera to a printer’s USB port with the supplied USB cable.
Select:
5. Press the OK button and a Motion GIF file is saved.
ƃ How to play back the Motion GIF file
1. Select a Motion GIF file by using the smart button.
2. Press the vertical smart button and menus
display.
3. Press the start menu button.
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
ŝ45Ş
PictBridge
ſ If you selected [Computer], when you connected the camera to your printer, the
[Connecting Computer] message will display and the connection will not be
established. In this case, disconnect the USB cable, and then change the menu.
Or press the Printer button and the camera is connected to the printer displaying
the [Connecting Printer] message. But, the camera may not connect to the
printer, depending on the manufacturer and model of the printer
ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print
Quality, Date Print, and File Name Print menus for printed pictures.
ƈ Easy printing : When you connect the camera to printer in the Play back mode,
you can print a picture easily with the default print settings.
1. In the play back mode, connect the camera and
the printer. The menu icons will display as
shown.
2. Press the
‫ڹ‬
No.
1
button.
3. Select the [Yes] menu and the image will print.
2
Print?
Yes
3
No
4
ƈ Print mode : You can select the Easy printing mode or Custom printing mode.
5
6
: Custom Printing mode
: Easy Printing mode
7
Icon
‫ں‬
‫ڻ‬
‫ڼ‬
‫ڽ‬
‫ھ‬
‫ڿ‬
Description
Menu
Selecting images for printing
One Pic, All Pics
Setting the size of the printing Auto, PostCard, Card, 4x6, L,
2L, Letter, A4, A3
paper
Setting the number of pictures to Auto, Full, 1, 2, 4, 8, 9, 16,
be printed on a sheet of paper
Index
Setting the quality of the
Auto, Plain, Photo, FastPhoto
printing paper
Setting the quality of the
Auto, Draft, Normal, Fine
picture to be printed
Setting whether to print the date
Auto, Off, On
Setting whether to print the file
Auto, Off, On
name
ſ Some menu options are not supported in all manufacturer and printer models.
If not supported, the menus are still displayed in the LCD, but are not selectable.
ſ If the setting values are not changed in the automatic / manual setting, the
setting values are automatically kept.
ŝ46Ş
PictBridge
ƈ Printing images (Custom mode) : Images will be printed with changed printer
setting.
1. In custom printing mode, press the Print menu
button.
ƈ Reset : Initialises user-changed configurations.
1. In custom printing mode, press the Reset menu
button.
Print?
Yes
No
2. All settings will be reset.
2. Select the [Yes] menu.
Print?
Yes
No
Printer button
3. The screen shown on the right will appear and
the picture will be printed. If no picture is
selected, the [No Image!] message will be
displayed. Press the BACK button while printing
to cancel the printing.
Now Printing
001 / 001
Cancel:BACK
ƈ If you select [Computer] sub menu in the [USB]
setup menu, [Connecting Computer] message
will display when you connect the camera to
your printer and the connection will not be
established. In this case, press the Printer
button. [Connecting Printer] message will
display and the Easy printing mode will be
selected.
Ȟ Ȟ Connecting Computer
Printer:
* In some instances the camera may not connect
to the printer, this will depend on the
manufacturer of the printer.
ŝ47Ş
Setup menu
ƈ In this mode, you can set up basic settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Secondary menu
OSD set
(Recording mode)
Full
Basic
Hide
LCD Save
OSD set
(Playback mode)
Full
Basic
Hide
-
File
Series
Reset
ENGLISH
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
DANSK
Imprint
LCD
ŝ48Ş
Sound Volume
p.49
Start Sound
p.49
Shutter Sound
p.49
Format
Copy to Card
Video Out
USB
Reset
Sub menu
Off
User image
Off
Medium
Off
Sound2
Off
Sound2
Off
Sound2
No
No
NTSC
Computer
No
Magyar
-
Date&Time
Start Image
Beep Sound
BAHASA
POLSKI
Main menu
p.49
FRANÇAIS
DEUTSCH
Language
Page
Menu tab
yy/mm/dd
mm/dd/yy
dd/mm/yy
Off
Off
Date
Date &Time
-
Dark
Normal
Bright
-
ſ Menus are subject to change without prior notice.
p.50
p.50
p.50
AF Lamp
Off
On
p.50
Power Off
1, 3, 5, 10 min
-
p.50
Quick View
Off
0.5, 1, 3 sec
p.51
Secondary menu
LOGO
Low
High
Sound1
Sound3
Sound1
Sound3
Sound1
Sound3
Yes
Yes
PAL
Printer
Yes
Page
p.51
p.51
p.51
p.51
p.52
p.52
p.52
p.53
p.54
p.54
Setup menu
[ File name ]
ƈ How to select the setup menu
ƈ This function allows the user to select the file naming format.
1. In any mode with the exception of Photo Gallery
mode, press the extension menu button (
)
and press the setup menu button (
).
2. Each buttons have different setup menus.
Press the F1-4 (
) menu button.
Full Ȝ
Basic
OSD Set
OSD Set
Hide
File
LCD Save
Language
Date&Time
Exit:BACK
[OSD set]
ƈ You can check shooting (Recording mode) and displayed image (Play back
mode) information.
Full Ȝ
OSD Set
Basic
OSD Set
Hide
File
LCD Save
Hide
OSD Set
OSD Set
File
Language
Language
Date&Time
Date&Time
Exit:BACK
Exit:BACK
[Recording mode menu]
[Full]
Full
Basic Ȝ
[Series] : New files are named using numbers that
Series
OSD Set
Reset
OSD Set
follow the previous sequence, even when a
File
Ȝ
new memory card is used, or after
Language
formatting, or after deleting all pictures.
Date&Time
[Reset] : After using the reset function, the next file
Exit:BACK
name will be set from 0001 even after
formatting, deleting all or inserting a new
memory card.
- The first stored folder name is 100SSCAM, and the first file name is SNC10001.
- File names are assigned sequentially from SNC10001 ƍ SNC10002 ƍ ~ ƍ
SNC19999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM.
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format.
[Play back mode menu]
: When the smart button is touched, the icons will be enlarged and OSD
will be displayed.
[Basic] : When the smart button is touched, the icons will be enlarged and OSD
will not be enlarged.
[Hide] : If the camera doesn't operate for about 3 seconds, all OSD will
disappear. When the shutter is pressed down or half way down, the
shutter speed and auto focus frame will display. OSD may display by
using the camera buttons except for the shutter button.
[LCD save] : If the camera is not used for about 30 seconds, the power and
camera status lamps blink and the LCD monitor turns off.
[ Language ]
ƈ There is a choice of languages that can be displayed on the LCD monitor. Even
if the battery and AC charger are removed and inserted again, the language
setting will be preserved.
LANGUAGE sub menu :
English, Korean, French, German, Spanish, Italian,
S.Chinese, T.Chinese, Japanese, Russian,
Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
BAHASA (MALAY / INDONESIAN), Arabic, Polish,
Hungarian, Czech and Turkish.
ENGLISH
OSD Set
OSD Set
FRANÇAIS
DEUTSCH Ȝ
ह
File
Language
Date&Time
Exit:BACK
ŝ49Ş
Setup menu
[ Setting up the Date / Time / Date type ]
[ Auto Focus lamp ]
ƈ You can change the date and time that will be displayed on the captured images
and set up the date type.
ƈ You can turn the Auto Focus lamp on and off.
- Date type : [yy/mm/dd], [mm/dd/yy], [dd/mm/yy],
[Off]
Ȝ
2006/06/01
OSD Set
yy/mm/dd
OSD Set
mm/dd/yy
File
dd/mm/yy
Off Ȝ
Language
Date&Time
ƃ Sub menus
[Off] : The AF lamp will not light up in a low light
condition.
[On] : The AF lamp will light up in a low light
condition.
Off
Imprint
On
LCD
AF Lamp
Ȝ
Power Off
Quick View
Exit:BACK
Exit:BACK
[ Imprinting the recording date ]
ƈ There is an option to include DATE / TIME on still images.
ƃ Sub menus
[Off]
: The DATE & TIME will not be
imprinted on the image file.
[Date]
: Only the DATE will be imprinted on
the image file.
[Date&Time] : The DATE & TIME will be imprinted
on the image file.
[ Auto power off ]
Off Ȝ
Date
Date&Time
Imprint
LCD
AF Lamp
Power Off
Quick View
Exit:BACK
[ LCD brightness ]
ƈ You can adjust the LCD brightness.
ƃ [LCD] sub menu : Dark, Normal, Bright
Dark
Normal Ȝ
Bright
Imprint
LCD
AF Lamp
Power Off
Quick View
Exit:BACK
ŝ50Ş
ƈ This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
ƃ Sub menus
[1, 3, 5, 10 min] : The power will turn off automatically
if not used for the period of time
specified.
1 min
Imprint
3 min
LCD
5 min
AF Lamp
10 min Ȝ
- After replacing the battery, the power off setting will
be preserved.
- Note that the automatic power off function will not
operate if the camera is in PC mode, slide show, playing back a voice
recording, playing back a movie file or taking a composite shot.
Power Off
Quick View
Exit:BACK
Setup menu
[ Quick view ]
[ Sound Volume ]
ƈ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
ƈ You can select the sound volume of start sound, operation sound and shutter
sound.
ƃ Sub menus
[Off]
: The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
ƃ [Sound Volume] sub menus : [Off], [Low], [Medium],
[High]
Off
Low Ȝ
Medium
Off
Imprint
0.5 sec
LCD
1 sec
AF Lamp
3 sec
Power Off
Ȝ
High
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Exit:BACK
Quick View
Exit:BACK
[ Operation Sound ]
ƈ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
[ Start up image ]
ƈ You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
ƃ Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with the
[START IMAGE] in the [RESIZE] menu in the play
mode.
- The start-up image will not be deleted by [DELETE]
or [Format] menu.
- The User images will be deleted by [Reset] menu.
ƃ [Sound] sub menus : [Off], [Sound 1], [Sound 2],
[Sound 3]
Off
Start Image
Sound 1
Sound Volume
Sound 2 Ȝ
Sound 3
BEEP Sound
Start Sound
Shutter Sound
Off Ȝ
Start Image
LOGO
Sound Volume
User image
BEEP Sound
Start Sound
Shutter Sound
Exit:BACK
[ Start up sound ]
ƈ You can select the sound that is activated whenever the camera is turned on.
Exit:BACK
ƃ Start up sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
Off
Start Image
Sound 1
Sound Volume
Sound 2
Sound 3 Ȝ
BEEP Sound
Start Sound
Shutter Sound
Exit:BACK
ŝ51Ş
Setup menu
[ Shutter sound ]
[ Copy To Card ]
ƈ You can select the shutter sound.
ƈ This enables you to copy image files, movie clips and voice recording files to the
memory card.
ƃ Shutter sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
Off
Start Image
Sound 1
Sound Volume
Sound 2
BEEP Sound
Sound 3
Start Sound
Ȝ
Shutter Sound
Exit:BACK
[No] : Cancels "Copy to Card".
[Yes] : All images, movie clips and voice recording
files saved in the internal memory are
copied to the memory card after the
[Processing!] message is displayed.
No
Yes Ȝ
Format
Copy to Card
Video Out
USB
Reset
Exit:BACK
[ Formatting a memory ]
INFORMATION
ƈ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
ƃ Sub menus
[No] : The memory will not be formatted.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run FORMAT
in Play mode, a [No Image!] message will
appear.
No Ȝ
Yes
Format
Copy to Card
Video Out
USB
Reset
Exit:BACK
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
ŝ52Ş
ƃ When this menu is selected without inserting a memory card, you can select
the [Copy To Card] menu but the menu can’t be run.
ƃ If there is not enough space available in the memory card to copy saved
images in the internal memory (20MB), the [Copy To Card] command will
copy only some of the images and display [Memory Full!] message. Then
the system will return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory card into the
camera.
ƃ When you move the images that are stored in the internal memory to the
memory card, the next number of file names will be created in the card to
avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file names
start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file names
start from after the last captured file name. After completing [Copy To
Card], the last stored image of the last copied folder is displayed on the
LCD monitor.
Setup menu
[ Selecting Video out type ]
ƈ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
ƈ Connecting to an external monitor
ƃ Using the USB cable with Cradle (Optional) :
Connect the camera and the cradle. Connect the
cradle to an external monitor with the supplied AV
cable.
NTSC
Format
PAL
Copy to Card
Ȝ
Video Out
USB
Reset
ƃ Using the AV cable with Camera :
Connect the camera to an external monitor with
the supplied AV cable.
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,
Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
- When using a TV as an external monitor, you will need to select the external or
AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre it.
Exit:BACK
- When the camera is connected to an external monitor, some parts of the
image may not display.
- When the camera is connected to an external monitor, the menu will be visible
on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.
- When the camera is connected to an external monitor, the button sound may
not sound.
[Using the AV cable with Cradle]
[Using the AV cable with Camera]
Yellow - Video
White - sound
ŝ53Ş
Setup menu
Important notes
[ Connecting an External Device (USB) ]
Be sure to observe the following precautions!
ƈ You can select an external device to which you want to connect the camera
using the USB cable.
ƃ Sub menus
[Computer] : Select this if you want to connect the
camera to your PC. Refer to page 63
for instructions on how to connect the
camera to your PC.
[Printer]
: Select this if you want to connect the
camera to your printer.
Refer to page 45 for instructions on how
to connect the camera to your printer.
Computer
Format
Printer
Copy to Card
Video Out
Ȝ
USB
Reset
Exit:BACK
ƈ Do not leave this camera in places subject to dust, chemicals (like naphthalene
and mothball), high temperatures or high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning
to use the camera for a long period of time.
ƈ Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the camera unusable.
[ Initialisation ]
ƈ All camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
ƃ Sub menus
[No] : Settings will not be restored to their defaults.
[Yes] : All settings will be restored to their defaults.
No
Format
Yes
Copy to Card
Video Out
USB
Ȝ
Reset
Exit:BACK
ŝ54Ş
ƈ This unit contains precision electronic components. Do not use or store this unit
in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
ƈ Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this camera is not
used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with
wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or
sand get inside the camera. Doing so may result in failure or may permanently
damage the unit.
Important notes
ƈ Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this occurs, turn
the camera off and wait for at least 1 hour until all moisture is dispersed.
Moisture built up can also occur on the memory card. If this happens, turn off
the camera and remove the memory card. Wait until the moisture has
dispersed.
ƈ Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the discoloration and
deterioration of the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the
lens.
ƈ If the digital camera is not used for a long period, an electric discharge can
occur.
It is a good idea to remove the battery and the memory card if you do not intend
using the camera for an extended period of time.
ƈ If the camera is exposed to an electronic interference, it will turn itself off to
protect the memory card.
ƈ Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid
can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into
contact with solvent materials such as benzol, insecticide, thinners etc. This
may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage
and keep the camera in a protective carrying case when not in use.
ƈ Do not attempt to disassemble or modify the camera.
ƈ Under certain conditions, static electricity can cause the flash unit to fire. This is
not harmful to the camera and is not a malfunction.
ƈ When images are uploaded or downloaded (when the charger and USB cable
are inserted into the cradle (optional) at the same time), the data transfer may be
affected by static electricity.
In this case, disconnect and re-connect the USB cable before trying the transfer
again.
ƈ Before an important event or going on a trip, you should check the camera
condition.
- Take a picture to check that the camera is working correctly and ensure you
have a fully charged spare battery.
- Samsung cannot be held responsible for camera malfunctions.
ŝ55Ş
Warning indicator
ƈ There are several warnings that may appear on the LCD display
Memory Error!
ϛMemory card error
ƍ Turn off the camera power and turn it on again
ƍ Insert the memory card again
ƍ Insert and format the memory card (p.52)
Card Locked!
ϛThe memory card is locked
ƍ SD memory card : Slide the write protect switch towards the top of the
memory card
No Card!
ϛA memory card is not inserted
ƍ Turn off the camera power and insert the memory card again
ƍ Turn off the camera power and turn it on again
No Image!
ϛThere are no images stored on the memory
ƍ Take images
ƍ Insert a memory card that is holding some images
File Error!
ϛFile error
ƍ Delete the erroneous files.
ϛMemory card error
ƍ Contact a camera service centre
ŝ56Ş
Low Battery!
ϛThere is low battery capacity
ƍ Insert a fully charged battery
Low Light!
ϛWhen taking pictures in dark places
ƍ Take pictures in Flash Photography mode.
DCF Full Error
ϛViolation of DCF format
ƍ Copy the images to a PC and format the memory.
Before contacting a service centre
ƈ Please check the following
The camera doesn’t switch on
ϛThere is low battery capacity
ƍ Insert a fully charged battery (p.13)
ϛBattery is inserted incorrectly with the polarities reversed.
ƍ Insert the battery according to the polarity marks (+, -)
ϛThe rechargeable battery is not inserted
ƍ Insert the battery and turn on the camera
The camera power ceases while in use
ϛThe battery is exhausted
ƍ Insert a fully charged battery
ϛThe Camera is turned off automatically
ƍ Turn on the camera power again.
Before contacting a service centre
Battery power quickly drains
ϛThe Camera is being used in low temperatures
ƍ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
Camera does not take images when pressing the Shutter button
ϛThere is insufficient memory capacity
ƍ Delete unnecessary image files
ϛThe memory card has not been formatted
ƍ Format the memory card (p.52)
ϛThe memory card is exhausted
ƍ Insert a new memory card
ϛThe memory card is locked
ƍ Refer to [Card Locked!] error message (p.56)
ϛThe cameraŖs power is off
ƍ Turn the camera power on
ϛThe battery is exhausted
ƍ Insert charged battery (p.13)
ϛBattery is inserted incorrectly with the polarities reversed.
ƍ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ϛThe camera stopped due to a malfunction
ƍ Remove /re-insert battery and switch the camera on
The images are unclear
ϛA picture was taken the subject without setting an appropriate macro mode
ƍ Select an appropriate macro mode to take a clear image.
ϛTaking a picture beyond the flash range
ƍ Take a picture within the flash range
ϛThe lens is smudged or dirty
ƍ Clean the lens
The flash does not fire
ϛFlash off mode has been selected
ƍ Dis-engage flash off mode
ϛThe camera mode can't use flash
ƍ Refer to the FLASH instruction (p.25)
Incorrect date and time is displayed
ϛThe date and time have been set incorrectly or the camera has adopted the
default settings
ƍ Reset the date and time correctly
The camera buttons do not operate
ϛCamera malfunction
ƍ Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ϛIncorrect memory card format
ƍ Re-format the memory card
The images don't play back
ϛIncorrect file name (Violation of DCF format)
ƍ Do not change the image file name
ŝ57Ş
Before contacting a service centre
Colour of image is different to the original scene
ϛWhite balance or effect setting is incorrect
ƍ Select appropriate White balance and effect
Images are too bright
ϛExposure is excessive
ƍ Reset exposure compensation
No image on external monitor
ϛThe external monitor has not been connected properly with the camera
ƍ Check the connection cables
ϛThere are incorrect files in the memory card
ƍ Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
ϛCable connection is incorrect
ƍ Check the connection
ϛThe camera is off
ƍ Turn the camera on
ϛThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS Mac OS
9.0 ~ 10.4. Alternatively the PC does not support USB
ƍ Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.4 to PC that
supports USB
ϛThe camera driver is not installed
ƍ Install a [USB Storage Driver]
Specifications
ƈ Image Sensor
- Type : 1/1.8ůCCD
- Effective Pixel : Approx. 10.1 Mega-pixel
- Total Pixel : Approx. 10.3 Mega-pixel
ƈ Lens
- Focal Length : Schneider Lens f = 7.4 ~ 22.2mm
(35mm film equivalent : 35 ~ 105mm)
- F No. : F2.8 ~ F5.1
- Digital Zoom :ŋStill Image mode : 1.0X ~ 5.0X
ŋPlay mode : 1.0X ~ 11.4X (depends on image size)
ƈ LCD Monitor : 2.5" color TFT LCD (230,000 pixel)
ƈ Focusing
- Type : TTL auto focus
- Range
Wide
Normal
Macro
Auto Macro
Tele
80cm ~ Infinity
4cm ~ 80cm
4cm ~ Infinity
50cm ~ 80cm
50cm ~ Infinity
ƈ Shutter
- Speed : - Auto : 1 ~ 1/1,500 sec. - Manual Mode : 15 ~ 1/1,500 sec.
- Night : 4 ~ 1/1,500 sec. - Fireworks : 4 sec.
ƈ Exposure
- Control : Program AE, Manual Exposure
Metering : Multi, Spot, Center
- Compensation : ť2EV (1/3EV steps)
- ISO Equivalent : Auto, 100, 200, 400, 800, 1000
ƈ Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in, Slow sync, Flash off
- Range : Wide : 0.4m ~ 4.5m, Tele : 0.5m ~ 2.5m (ISO AUTO)
- Recharging Time : Approx. 4 sec.
ŝ58Ş
Specifications
- Capacity (256MB MMC)
ƈ Sharpness : Soft, Normal, Vivid
ƈ Effect : Normal, B&W, Sepia, Red, Green, Blue, Negative, Composite, Frame,
GIF animation
ƈ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
ƈ Date Imprinting : Date&Time, Date, Off (user selectable)
ƈ Shooting
- Still Image :ŋModes : Auto, Program, Manual, ASR, Effect, Scene
ŋScene : Night, Portrait, Children, Landscape, Text, Close-up,
Sunset, Dawn, Backlight, Fireworks, Beach & Snow
ŋContinuous : Single, Continuous, H. Continuous, AEB, Motion
Capture
ŋSelf-timer : 2 sec., 10 sec., Double self timer (10sec. & 2sec.),
Remote Controller
- Movie Clip :ŋWith Audio (recording time : memory capacity dependent)
ŋSize : 640x480, 320x240 (3X Optical Zoom and Mute in Zooming)
ŋFrame rate : 30 fps, 15 fps
ŋColor Effect & WB selectable
ŋMovie Editing (Embedded): Pause during recording, Still Image
Capture, Time Trimming
ƈ Storage
- Media :ŋInternal Memory : About 20MB
ŋExternal Memory (Optional) : MMC/SD card (up to 1GB guaranteed)
- File Format :ŋStill Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
ŋMovie : AVI (MPEG-4) ŋAudio : WAV
- Image Size
7M
3136X2352
5M
2688X2016
3M
2240X1680
10M
49
95
139
7M
66
126
182
5M
88
167
237
3M
124
229
319
1M
451
691
840
ƈ Image Play
- Type : Single image, Thumbnails, Slide show with Effect & BGM, Movie Clip,
Photo Gallery
- Editing : Color Effect , Trimming, Rotating, Resizing
ƈ Voice Recording : Voice Recording (Max 1 hours)
Voice Memo in Still Image (Max. 10 sec.)
10M
3648X2736
Super Fine
Fine
Normal
1M
1024X768
ƈ Interface
- Digital output connector : USB 2.0
- Audio : Mono
- Video output : NTSC, PAL (user selectable)
- DC power input connector : 24pin Connector
ƈ Power Source
- Rechargeable battery : SLB-0837(B) (800mAh)
- Adaptor : DC 4.2V (SAC-45, SUC-C2)
- Cradle : SCC-NV2 (Optional)
* Included battery may depending on sales region.
ƈ Dimensions (WxHxD) : 96.5 x 60 x 18.5mm (projecting part 8mm)
ƈ Weight : 148.7g (without battery and card)
ƈ Operating Temperature : 0 ~ 40ŭC
ƈ Operating Humidity : 5 ~ 85%
ƈ Software
- Camera Driver : Storage Driver
(Windows 98/98SE/2000/ME/XP, Mac OS 9.0 ~ 10.4)
- Application : Digimax Master, Adobe Reader
ſ Specifications are subject to change without prior notice.
ſ All trademarks are the property of their respective owners.
ŝ59Ş
Software Notes
About the software
Please ensure that you read this instruction manual carefully before use.
ҮThe attached software is a camera driver and image editing software tool for
Windows.
ҮUnder no circumstances should all or part of either the software or the user
manual be reproduced.
ҮCopyrights for software are licensed only for use with a camera.
ҮIn the unlikely event of a manufacturing fault, we will repair or exchange your
camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
ҮUsing a Hand-made (self assembled) PC or a PC and OS that has not been
guaranteed by the manufacturer is not covered by the Samsung warranty.
ҮBefore using this manual, you should have a basic knowledge of computers and
O/S (Operating Systems).
System Requirements
For Windows
PC with processor better than Pentium II 450MHz
(Pentium 700MHz recommended)
Windows 98/ 98SE/ 2000/ ME/ XP
Minimum 64MB RAM (XP : 128MB)
200MB of available hard disk space
(1GB recommended)
USB port
CD-ROM drive
1024x768 pixels, 16bit color display
compatible monitor
(24bit color display recommended)
ŝ60Ş
For Macintosh
Power Mac G3 or later
Mac OS 9.0 ~ 10.4
Minimum 64MB RAM
110MB of available hard-disk space
USB port
CD-ROM drive
For playing back a movie clip
Mac OS 10.1 or later
MPlayer, VLC Media Player
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
ſ Screen Captures illustrated on this manual
is based on English Edition of Windows.
ƈ Camera driver : This enables images to transfer between the camera and
PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
Computer]. A USB Storage Driver is provided only for Windows. A USB Driver
for MAC is not included with the Application CD. You can use the camera with
Mac OS 9.0 ~ 10.4.
ƈ XviD codec : This makes movie clips (MPEG-4) recorded with this camera
play back on a PC.
To play back a movie clip recorded with this camera, you must install the XviD
codec. If a movie clip recorded with this camera does not play well, install this
codec. This software is only compatible with Windows.
ƈ Digimax Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie files with
this software. This software is only compatible with Windows.
About the software
INFORMATION
ƃ Be sure to check the system requirements before installing the driver.
ƃ To play back the movie taken with this camera on the computer, DirectX 9.0
must be installed.
ƃ You should allow 5 - 10 seconds for running the automatic setup program
according to the capability of your computer. If the frame does not show, run
the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive.
ƃ PDF documents of user manual are included in the Software CD-ROM
supplied with this camera. Search the PDF files with Window's explorer.
Before opening the PDF files, you must install the Adobe Reader included in
the Software CD-ROM.
ƃ To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later
had to be installed. Visit "www.microsoft.com" and upgrade the Internet
Explorer.
Setting up the application software
ƈ To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
ƈ You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display.
Click the [Install] menu in the Auto
run frame.
2. Install the camera driver and DirectX by selecting a button shown on the
monitor. If an latest version of DirectX was installed on your computer, DirectX
may not be installed.
ŝ61Ş
Setting up the application software
3. To play back the movie clip recorded with this camera on the computer, install
the XviD codec.
ſ The XviD codec is distributed according to and under the terms and conditions of
the GNU General Public License and anyone can copy, modifiy and distribute
this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR
EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE; provided, however, that you have to follow the GNU General Public
License whenever you are distributing this codec or modification thereof.
For more information see the GNU General Publice License documents
(http://www.gnu.org/copyleft/gpl.html).
ŝ62Ş
4. Install the Digimax Master in order.
Setting up the application software
5. After restarting the computer, connect the PC to the camera with the USB
cable.
6. Turn on the camera power.
The [Found New Hardware Wizard] will
open and the computer will recognise the
camera.
ſ If your OS is Windows XP, an image
viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was set up successfully.
Starting PC mode
ҮIf you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
ҮIn this mode, you can download stored images to your PC through the USB
cable.
ҮThe LCD monitor is always turned off in PC mode.
ƈ Connecting the camera to a PC
1. Press the Setup menu button and press the F4
menu button.
2. Select the [USB]-[Computer] menu by using the
smart button.
3. Connect the PC to the camera with the USB cable.
Computer
Format
Printer
Copy to Card
Video Out
Ȝ
USB
Reset
Exit:BACK
INFORMATION
ƃ If you have installed the camera driver, The [Found New Hardware Wizard]
may not open.
ƃ On a Windows 98 or 98 SE system, the Found New Hardware Wizard
dialog box opens and a window asking you to select a driver file may
appear. In this case, specify "USB Driver" in the CD supplied.
ŝ63Ş
Starting PC mode
ƈ Connecting the camera to a PC
ƈ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
[Using the USB cable with Cradle (optional)]
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk ƍ DCIM ƍ 100SSCAM].
The image files will then be displayed.
[Using the USB cable with Camera]
ſ If you selected [Printer] in Step 4, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.
ƈ Disconnecting the camera and PC : Refer to page 65
(Removing the removable disk).
INFORMATION
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
ƃ Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
5. Click a folder where you want to paste the file.
ŝ64Ş
Starting PC mode
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
7. An image file is transferred from the camera
to your PC.
Removing the removable disk
ƈ Windows 98/98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
2. Unplug the USB cable.
ƈ Windows 2000/ME/XP
(The illustrations may differ from those shown depending on the Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage
Device] and click the [Stop] button.
- By using [Digimax Master], you can see the stored images in the memory
directly on the PC monitor and you can copy or move the image files.
CAUTION
ƃ We recommend that you should copy the images to the PC to view them.
Opening images directly from the removable disk may be subject to
unexpected disconnection.
ƃ When you upload a file that is not taken by this camera to the Removable
Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage
Device] and click the [OK] button.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
ŝ65Ş
Removing the removable disk
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk
will be removed safely.
Removing the USB Driver for Windows 98SE
ƈ To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
7. Unplug the USB cable.
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 9.0 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add / Remove Programs Properties.
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
2. Select an image file and copy or move it to MAC.
CAUTION
ƃ For Mac OS 10.0 or later : First complete uploading from computer to
camera and then remove the removable disk
with the Extract command.
ƃ If a movie clip can’t play back on the Mac OS, please visit the following
site (http://www.divx.com/divx/mac/) and download the codec. Or, use a
media player that supports the Xvid codec (Mplayer, VLC (VideoLAN
Client) media player).
ŝ66Ş
6. Uninstallation is complete.
Digimax Master
ƈ You can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows except for
the Windows 98.
ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master
ƍ Digimax Master].
ƃ Downloading images
1. Connect the camera to your PC.
4. Select a destination and make a folder to
save downloaded images and folders.
- Folder names can be made in order of date
and images will be downloaded.
- Folder name will be made as you want and
images will be downloaded.
- After selecting a folder that was made
before, images will be downloaded.
5. Click [Next >] button.
2. A window for downloading images will
display after connecting the camera to
your PC.
- To download the captured images,
select the [Select All] button.
- Select desired folder in the window and
click the [Select All] button. You can
save captured images and selected folders.
- If you click the [Cancel] button, downloading
will be cancelled.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
3. Click [Next >] button.
7. Downloaded images will be displayed.
ŝ67Ş
Digimax Master
ƃ Image viewer : You can view the stored images.
‫ڹ‬
ƃ Image edit : You can edit the still image.
‫ڽ‬
‫ھ‬
‫ڹ‬
‫ڼ‬
‫ڿ‬
‫ں‬
‫ڻ‬
‫ڼ‬
‫ں‬
‫ڻ‬
- Image viewer functions are listed below.
‫ ڹ‬Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
‫ ں‬Image selection window : You can select the desired images in this window.
‫ ڻ‬Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
‫ ڼ‬Preview window : You can preview an image or a movie clip and check the
multi media information.
‫ ڽ‬Zoom bar : You can change preview size.
‫ ھ‬Folder display window : You can see the folder location of the selected
image.
‫ ڿ‬Image display window : Images in the selected folder are displayed.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ68Ş
- Image edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the
[Help] menu.
‫ ں‬Drawing tools : Tools for editing an image.
‫ ڻ‬Image display window : A selected image displays in this window.
‫ ڼ‬Preview window : You can preview the changed image.
ſ A still image edited with Digimax Master can’t be played back on the camera.
ſ Refer to the [Help] menu in Digimax Master for further information.
Digimax Master
FAQ
ƃ Movie edit : You can get the still image, movie clip, narration, music files together
in a movie clip.
ƈ Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
ƍ Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
ƍ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
ƍ Turn the camera power off and on again. Transfer the file again.
Case 4
When using the USB hub.
ƍ There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
Case 5
Are other USB cables connected to the PC?
ƍ The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
‫ڹ‬
‫ں‬
- Movie clip edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv), Windows media
(asf) and movie clip for this camera (avi, MPEG-4) file types.
‫ ں‬Frame display window : You can insert multi media in this window.
ſ Some movie clips that were compressed with a codec that is not compatible with
the Digimax Master can’t play back in the Digimax Master.
ſ Refer to the [Help] menu in Digimax Master for further information.
ŝ69Ş
FAQ
Case 6
Case 7
Case 8
When I open the Device Manager (by clicking Start ƍ (Settings) ƍ
Control Panel ƍ (Performance and Maintenance) ƍ System ƍ
(Hardware) ƍ Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark (?) beside them or
devices with an exclamation mark (!) beside them.
ƍ Right-click on the entry with the question (?) or exclamation (!) mark
and select "Remove". Restart the PC and connect the camera again.
For Windows 98 PC, remove the camera driver also, restart the PC,
and then reinstall the camera driver.
In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
ƍ Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
The camera is connected to the USB port located on the front of the
computer.
ƍ When the camera is connected to the USB port located on the front of
the computer, the computer may not recognise the camera. Connect
the camera to the USB port located on the back of the computer.
ƈ When the movie clip doesn’t play back on the PC
ſ When the movie clip recorded by the camera doesn’t play back on the PC,
the causes are mostly due to the codec installed on the PC.
ŝ70Ş
ƃ When codec for play back the movie clip isn’t installed
ƍ Install the codec as listed below.
[ Installing codec for Windows ]
1) Insert the CD provided with the camera.
2) Run the Windows Explorer and select [CD-ROM drive:\XviD] folder and click
the XviD-1.1.0-30122005.exe file.
ſ The XviD codec is distributed according to the GNU General Public License
and everyone can copy, distribute and change this codec. This License
applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General
Public License.
For more information, see the License documents
(http://www.gnu.org/copyleft/gpl.html).
ƃ When the DirectX 9.0 or later is not installed
ƍ Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\
DirectX 9.0] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for downloading the
DirectX. http://www.microsoft.com/directx
FAQ
ƃ If a PC (Windows 98) stops responding while the camera and PC are connected
repeatedly
ƍ If a PC (Windows 98) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera. In this case, restart the PC.
ƃ If a PC connected with the camera stops responding while Windows is starting.
ƍ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
ƃ If the movie clip can't be deleted, or if a removable disk can’t be extracted or if an
error message displays during the file transfer.
ƍ If you install only the Digimax Master, the problems mentioned above
occasionally happen.
- Close the Digimax Master program by clicking the Digimax Master icon on
the Taskbar.
- Install all the application programs included in the software CD.
Samsung Techwin cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents
Samsung Techwin's will to create environment-friendly
products, and indicates that the product satisfies the EU
RoHS Directive.
ŝ71Ş
FCC notice
ƈ NOTE :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
ƈ CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
ƈ Declaration of Conformity
Trade Name
: SAMSUNG TECHWIN
Model No.
: Samsung NV10
Responsible Party : Samsung Opto-Electronics America, INC.
Address
: 40 Seaview Dr. Secaucus,NJ 07094
Telephone No.
: 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
ŝ72Ş
MEMO
SAMSUNG TECHWIN CO., LTD.
SAMSUNG OPTO-ELECTRONICS FRANCE S.A.S.
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099
FAX : (82) 31-740-8398
www.samsungcamera.com
TOUR MAINE MONTPARNASSE
33, AVENUE DE MARINE
75755, PARIS CEDEX 15, FRANCE
TEL : +33 (0)1 4279 2200
FAX : +33 (0)1 4320 4510
www.samsungphoto.fr
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA POST CODE : 300190
TEL : (86) 22-2761-4599
FAX : (86) 22-2769-7558
www.samsungcamera.com.cn
SAMSUNG OPTO-ELECTRONICS GmbH
SAMSUNG HOUSE 1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS,
NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
www.samsungcamerausa.com
ZENTRALE, KEINE REPARATUR
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS, GERMANY
TEL: 49 (0) 6196 66 5303
FAX: 49 (0) 6196 66 5366
TECHNISCHE SERVICE HOTLINE:
00800 4526 3727
(nur kostenfrei für Anrufe aus Deutschland)
Die Adressen Ihrer Kundendienste sowie die
Garantiebestimmungen entnehmen Sie bitte aus dem
beiliegenden Faltblatt (SAMSUNG INTERNATIONAL
WARRANTY CERTIFICATE)
INTERNET: www.samsungcameras.de
SAMSUNG OPTO-ELECTRONICS UK LIMITED
RUSSIA INFORMATION CENTER
SAMSUNG ELECTRONICS
117545 ST. DOROZHNAYA BUILDING 3,
KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA
TEL : (7) 095-363-1700
CALL FREE : (8) 800 200 0 400 (from Russia only)
www.samsungcamera.ru
Internet address - http : //www.samsungcamera.com
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-0045
Download PDF