Samsung | SAMSUNG NV4 | Samsung NV4 User Manual

Instructions
Getting to know your camera
Use this camera in the following order.
Thank you for buying a Samsung Digital Camera.
Set up the camera driver
Take a picture
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.102~105)



Take a picture. (p.20)

Insert the USB cable
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.106)
Check the camera’s power
Check the camera’s power. If the
power is turned off, press the camera
button to turn it on.
Check [Removable Disk]
Open Windows EXPLORER and
search for [Removable Disk]. (p.107)


Prior to using this camera, please read the user manual thoroughly.
If you require After Sales service, please bring the camera and the cause
of the camera malfunction (such as battery, Memory card etc.) to the A/S
centre.
Please check that the camera is operating properly prior to when you intend
to use it (e.g. for a trip or an important event) to avoid disappointment.
Samsung takes no responsibility for any loss or damage that may result
from camera malfunction.
Keep the manual in a safe place.
The contents and illustrations in this manual are subject to change without
prior notice for upgrading the camera functions.
If you use a card reader to copy the images on the memory card to your
PC, the images could be damaged. When transferring the images taken
with the camera to your PC, be sure to use the supplied USB cable to
connect the camera to your PC. Please note that the manufacturer accepts
no responsibility for loss or damage of images on the memory card due to
the use of a card reader.

Microsoft, Windows and Windows logo are registered trademarks of
Microsoft Corporation incorporated in the United States and/or other
countries.

is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.
All brand and product names appearing in this manual are registered
trademarks of their respective companies.

001
DANGER
WARNING
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.





Do not attempt to modify this camera in any way. This may result in fire,
injury, electric shock or severe damage to you or your camera. Internal
inspection, maintenance and repairs should be carried out by your dealer
or Samsung Camera Service centre.
Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use
it. Switch off the camera, and then disconnect the power source. You must
contact your dealer or Samsung Camera Service centre. Do not continue
to use the camera as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the
camera through access points e.g. the memory card slot and battery
chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk of
electric shock.
002





Do not use the flash in close proximity to people or animals. Positioning
the flash too close to your subject’s eyes may cause eyesight damage.
For safety reasons keep this product and accessories out of reach of
children or animals to prevent accidents e.g.:
– Swallowing battery or small camera accessories. If an accident should
occur, please consult a doctor immediately.
– There is the possibility of injury from the camera’s moving parts.
Battery and camera may become hot during prolonged use and it may
result in camera malfunction. Should this be the case, allow the camera to
sit idle for a few minutes to allow it time to cool.
Do not leave this camera in places subject to extremely high temperatures,
such as a sealed vehicle, direct sunlight or other places of extremes in
temperature. Exposure to extreme temperatures may adversely affect the
camera’s internal components and could cause a fire.
When in use, do not cover the camera or Charger. This may cause heat
to build up and distort the camera body or cause a fire. Always use the
camera and its accessories in a well-ventilated area.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in a minor or moderate injury.









Leaking, overheating, or burst battery could result in fire or injury.
– Use battery with the correct specification for the camera.
– Do not short circuit, heat or dispose of battery in fire.
– Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a long period
of time. Battery may leak corrosive electrolyte and permanently damage
the camera’s components.
Do not fire the flash while it is in contact with hands or objects. Do not
touch the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fire or electric shock.
Take care not to touch the lens or lens cover to avoid taking an unclear
image and possibly causing camera malfunction.
Avoid obstructing the lens or the flash when you capture an image.
When using this camera in low temperatures, you may experience the
following. These are not camera malfunctions and usually recover at
normal temperature.
– It takes longer to turn on the LCD monitor and the colour may differ
from the subject.
– When changing the composition, there may be an after image on the
LCD monitor.
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
It is highly likely to result in computer malfunctions when the 20 pin
connector is connected to the USB port of a PC. Never connect the 20 pin
connector to USB port of a PC.
Contents
READY
007 System char
chart
007
007
Package Contents
Sold Separately
008 Identification of features
008
009
010
010
Front & Top
Back
Bottom
5 Function button
012
015
015
016
Connecting to a power source
Inserting the batter
battery
Inserting the memory car
card
Instructions on how to use the
memory car
card
018 When using the camera for the
first time
RECORDING
019 LCD monitor indicator
020 Starting the Recording mode
020
020
021
021
022
023
023
024
024
025
025
Selecting modes
How to use the Auto mode
How to use the Program mode
How to use the DIS(Digital Image
Stabilization) mode
Using the Photo Help guide mode
How to use the Portrait mode
How to use the Scene modes
How to use the Movie clip mode
Recording the movie clip without sound
Pausing while recording a movie clip
(Successive Recording)
003
How to use the Multimedia mode
Contents
026 Things to watch out for when
taking pictures
027 Focus lock
027 Using the camera buttons to set
the camer
camera
027 POWER button
028 Shutter button
028 FD (Face Detection) button
030 ZOOM W / T button
031 Function Description / Info / Up
button
032 Macro / Down button
033 Flash / Left button
035 Self-timer / Right button
037 MENU / OK button
038 Fn button
038
039
039
040
040
041
041
042
How to use the Fn menu
Fn button: Size
Fn button: Quality / Frame rate
Fn button: Metering
Fn button: Drive mode
Fn button: ISO
Fn button: White balance
Fn button: Exposure
compensation
043 Fn button: Long time shutter
004
044 E (Effect) button
044 E (Effect) button: Photo Style
Selector
045 E (Effect) button: Image editing
045
046
046
046
Colour
Saturation
Contrast
Sharpness
047 Using the LCD monitor to adjust
the camera settings
047 Focus Area
048 ACB
048 Voice Memo
049 Voice recording
050 Recording the movie clip without voice
050 SCENE mode
PLAY
050 Starting play mode
050
051
051
052
052
053
Playing back a still image
Playing back a movie clip
Movie clip capture function
On camera movie trimming
Playing back a recorded voice
Playing back a voice memo
053 LCD monitor Indicator
054 Using the camera buttons to set
the camer
camera
054
054
Play mode button
Thumbnail / Enlargement button
Contents
056
056
057
057
057
058
059
Info / Up button
Play & Pause / Down button
Left / Right / Menu / OK button
Print button
Delete button
E (Effect) button: Resize
E (Effect) button: Rotating an
image
059 E (Effect) button: Colour
060 E (Effect) button: Image editing
060
060
061
061
061
SETUP
070 Sound menu
071 Sound
071
071
071
071
071
071
072 Setup menu
073 SETUP1
073
073
074
074
074
074
ACB
Red eye removal
Brightness control
Contrast control
Saturation control
Start the slide show
Selecting Images
Configure slide show effects
Setting play interval
Setting Background Music
066 Playback
066
066
066
067
069
Voice memo
Protecting images
Deleting images
DPOF
Copy To Card
Language
Setting up the Date / Time / Date type
Start up image
LCD brightness
Quick view
LCD save
075 SETUP2
075
075
076
077
077
078
079
062 Setting up the play back function
using the LCD monitor
063 Starting the slide show
063
064
064
065
065
Volume
Start up Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
PRINT
079
080
081
081
Formatting a memor
memory
Initialisation
File name
Imprinting the recording date
Auto power of
off
Selecting video out type
Auto focus lamp
PictBridge
PictBridge: Picture Selection
PictBridge: Print Setting
PictBridge: Reset
005
Contents
MULTIMEDIA
082 MP3 / PMP / TEXT VIEWER mode
082
Downloading files
083 Starting the MP3 / PMP / TEXT
VIEWER mode
085 LCD monitor indicator for MP3 / PMP
/ TEXT VIEWER mode
086 Using the camera buttons to adjust
the camer
camera
086
086
086
087
087
Volume button
Play & Pause / Seeking button
Delete button
Hold / Equalizer button
Play mode button
088 Setting up the playback function
using the LCD monitor
089
089
089
090
090
090
090
091
091
091
091
092
092
006
Resume
Play mode
Skin of MP3 player
Playing back the slide show
Setting slide show interval
Delete all
Frame search
Display setting
Infomation of DRM file
Setting up the recording function in the
MP3 mode
Auto Scroll
MP3 BGM Setting
Language setting
SOFTWARE
092
094
095
097
Important notes
Warning indicator
Before contacting a service centr
centre
Specifications
100
101
101
102
Software notes
System requirements
About the softwar
software
Setting up the application
software
softwar
ware
Starting PC mode
Removing the removable disk
Setting up the USB Driver for
MAC
Using the USB Driver for MAC
Removing the USB Driver for
Windows 98SE
Samsung Converter
Samsung Master
FAQ
Correct Disposal of This Product
FCC notice
106
108
109
109
110
110
112
115
117
118
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional
equipment, contact your nearest Samsung dealer or Samsung service centre.
Package Contents
Camera
User manual,
Product warranty
Camera strap
AV cable
AC adapter (SAC-47)/
USB cable (SUC-C3)
Software CD
(see p.101~102)
Earphones
20 Pin Gender
Rechargeable battery
(SLB-0937 )
Sold Separately
SD/SDHC memory card/
MMC (see p.17)
Camera case
007
Identification of features
Front & Top
Shutter button
Microphone
POWER button
Mode dial
Speaker
Flash
AF sensor/
Self-timer lamp
008
Lens
Identification of features
Back
Zoom T button (Digital zoom)
Zoom W button (Thumbnail)
Camera status lamp
LCD monitor
E (Effect) button
Fn / Delete button
Camera strap
Open
Play mode /
Print button
5-function button
FD (Face Detection) button /
MP3, PMP hold button
Close
USB / AV / DC
terminal
009
Identification of features
Bottom
5 Function button
Memory card slot
Function Description/Information/Up button
Self-timer/
Right button
Flash/
Left button
MENU/OK button
Tripod socket
Battery holder
Battery chamber cover Battery chamber slot
010
Macro/Play &
Pause/
Down button
Identification of features

Self-timer lamp
Icon
Status
Description
Blinking
– For the first 8 seconds, the lamp blinks at 1
second intervals.
– For the final 2 seconds, the lamp blinks quickly
at 0.25-second intervals.
Blinking
For the final 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Blinking


Description
Power on
The lamp turns on and off when the camera is
ready to take a picture.
After taking a picture
The lamp blinks while saving the image data
and turns off when the camera is ready to take
another picture.
When the USB cable is
inserted to a PC
The lamp lights up. (LCD monitor turns off
after initializing the device)
The lamp is off.
The lamp turns on.
(The camera is focused on the subject)
The lamp blinks.
(The camera doesn’t focus on the subject)
Mode icon: Refer to page 20 for more information about the camera
mode setting.
MODE
SHOOTING
mode
Status
When the USB cable is
inserted to a printer
When the AF activates
After pressing the Shutter button, the image is
taken in accordance with the subject’s movement.
Camera Status Lamp
Transmitting Data
with a PC
When the printer is printing
SCENE
mode
Auto
Program
DIS
Portrait
Scene
Movie
Nightscene
Children
Sunset
Dawn
Backlight
Self Shot
Food
Cafe
Photo Help Guide
Landscape Close up
Firework
Text
Beach&Snow
The lamp blinks. (LCD monitor turns off)
The lamp blinks and turns off when the printer
is ready to print a picture.
MULTIMEDIA
MP3
PMP
TEXT VIEWER
011
Connecting to a power source
You should use the rechargeable battery SLB-0937 supplied with the
camera. Be sure to charge the battery before using the camera.

SLB-0937 rechargeable battery Specification
Model
SLB-0937
Type
Lithium Ion
Capacity
900mAh
Voltage
3.7V
Charging time
(When the camera is turned off)
Approx. 150 MIN

MP3
Number of images and battery life: Using the SLB-0937
Battery life
/Number of
images
012
Still image
Approx. 105
MIN/
Approx. 210
shots
Movie
Approx. 115
MIN
Conditions
Using the fully charged battery, Auto
mode, 8M image size, Fine image
quality, Shot to shot interval: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then Powering it off for 1 minute.
Using the fully charged battery 640x480
image size 30fps frame rate
Multimedia
PMP

Battery life
/Number of
images
Approx. 300
MIN
Approx. 220
MIN
Conditions
Using the fully charged battery LCD Off.
Using the fully charged battery
These figures are measured under Samsung’s standard conditions and
shooting conditions and may vary depending on the user’s methods.
Important information about battery usage.
 When the camera is not used, turn off the camera power.
 Please remove the battery if the camera will not be used for long
periods. Batteries can lose power over time and are prone to
leaking if kept inside the camera.
 Low temperatures (below 0°C) can affect the performance of the
battery and you may experience reduced battery life.
 Batteries will usually recover at normal temperatures.
 During extended use of the camera, the camera body may
become warm. This is perfectly normal.
 When you use earphones, do not remove the battery while the
camera is turning on. It may generate a loud noise.
Connecting to a power source
You can charge the rechargeable battery (SLB-0937) by using the SAC-47
KIT which consists of the AC adapter (SAC-47) and the USB cable (SUC-C3).
When the SAC-47 and SUC-C3 are combined, they can be used as an AC
cable.

Using an AC cable:
Connect the AC adapter to the
USB cable.
It can be used as a power cable.

Using a USB cable:
Remove the AC adapter (SAC-47).
You can download stored images to
your PC (p.107) or supply the power
to your camera through the USB
cable(SUC-C3).
Important information about USB cable usage.
 Use a USB cable (SUC-C3) with the correct specification.
 If the camera is connected to the PC through a USB hub:
connect the camera directly to the PC.
 If the camera and other devices are connected to the PC at
the same time: remove other device.
 If the USB cable is connected to a port located on the front
of the PC: remove the cable and connect it to a port located
on the back of the PC.
 If the USB port of the PC doesn’t meet the Power output
standard (4.2V, 400mA), the camera may not be charged.
013
Connecting to a power source

How to charge the rechargeable battery (SLB-0937)

Charging LED of the AC Adapter
Charging LED
Being Charged



014
Before inserting any cables or AC adapter, check the directions
and do not insert using force. It may cause breakage of cable
or camera.
If the charging LED of the AC Charger does not turn on or blink
after inserting the rechargeable battery, please check whether
the battery is inserted correctly.
If you charge the battery with the camera power on, the battery
can’t charge fully. Turn the camera off while charging the
battery.
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on
– If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. This is because of the low battery capacity.
Charge the battery for more than 10 minutes before using the camera.
– Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger is inserted,
the camera power may be turned off because the rechargeable battery is
discharged again.
Inserting the battery
Inserting the memory card
Insert the battery as shown.
Insert the memory card as shown.
– If the camera does not turn on
after you have inserted battery,
please check whether the battery
is inserted with the correct
polarity (+/-).
– When the battery chamber
cover is opened, do not force it.
This may cause damage to the
battery chamber cover.

There are 4 indicators for battery condition that are displayed on the
LCD monitor.
- Turn off the camera’s power
before inserting the memory
card.
- Have the front label of the
memory card facing toward the
front of the camera (Lens) and
the card pins toward the back of
the camera (LCD monitor).
- Do not insert the memory card
the wrong way round.
Doing so may damage the memory card slot.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Low battery
capacity
Prepare to
recharge or
use spare
battery)
Battery empty.
Recharge or
use spare
battery.
015
Instructions on how to use the memory card











Be sure to format the memory card (see p.75) if you are using a newly
purchased memory card for the first time, if it contains data that the camera
cannot recognise, or if it contains images captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or
removed.
Repeated use of the memory card will eventually reduce the memory
card’s performance. Should this be the case, you will need to purchase a
new memory card. Wear and tear on the memory card is not covered by
the Samsung warranty.
The memory card is an electronic precision device. Do not bend, drop or
subject the memory card to any heavy impact.
Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in
temperature.
Do not allow the memory card to become dirty or to come into contact with
any liquid. Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory
card is warm. This is perfectly normal.
Do not use a memory card that is used in another digital camera. To
use the memory card in this camera, format the memory card using this
camera.
Do not use a memory card formatted by another digital camera or memory
card reader.
016




If the memory card is subjected to any of the following, the recorded data
may become corrupted:
– When the memory card is used incorrectly.
– If the power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g.
floppy disks, hard disks, CD etc.
If there is insufficient memory available:
A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory
card or delete unnecessary images stored on the memory card.

Don’t remove the memory card when the camera status lamp
is blinking as this may cause damage to data in the memory
card.
Instructions on how to use the memory card
The camera can use SD/ SDHC Memory Cards and MMC (Multi Media
Cards).
When using a 256MB MMC memory, the specified shooting capacity will be as
follows. These figures are approximate as image capacities can be affected by
variables such as subject matter and memory card type.
Card pins
Recorded
image size
Write protect
switch
Label
Still
image
<SD (Secure Digital) memory card>
The SD/ SDHC memory card has a write protect switch that prevents image
files from being deleted or formatted. By sliding the switch to the bottom of the
SD memory card, the data will be protected. By sliding the switch to the top of
the SD memory card, the data protection will be cancelled.
Slide the switch to the top of the SD memory card before taking a picture.
*
Movie
clip

Super
Fine Normal
Fine
30FPS
20FPS
15FPS
53
94
135
–
–
–
60
107
171
–
–
–
71
133
202
–
–
–
86
161
220
–
–
–
134
226
306
–
–
–
434
520
600
–
–
–
–
–
–
–
About
8’31”
–
–
–
–
About
8’58”
–
About
16’59”
–
–
–
About
28’56”
–
About
53’31”
The recording times can be changed by the zoom operation.
The zoom button doesn’t function during the movie recording.
017
When using the camera for the first time



Charge the rechargeable battery fully before using the camera for the first
time.
When the camera is turned on for the first time, a menu will be displayed
to set date/time, language and battery type in the LCD monitor. This menu
will not be displayed after setting up. Set up the date/time, language and
battery type before using this camera.
Setting up the language
1. Select the [Language] menu by pressing
the Up/Down button and press the
SETUP1
Language
ENGLISH
Right button.
Date&Time
한국어
2. Select the desired sub menu by
FRANÇAIS
DEUTSCH
pressing the Up/Down button and press
ESPAÑOL
the OK button.
ITALIANO
– You can select one of 22 languages.
OK Set
Back
These are listed below:
English, Korean, French, German, Spanish, Italian, S.Chinese,
T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai, Bahasa (Malay / Indonesian), Arabic, Czech,
Polish, Hungarian and Turkish.
018

Setting up the date, time and date type
1. Select the [Date&Time] menu by
pressing the Up/Down button and press SETUP1
Language
the Right button.
London
Date&Time
2. Select the desired sub menu by pressing
2008 / 01 / 01
the Up/Down/Left/
Left Right button and
Left/
12 : 00
yy/mm/dd
press the OK button.
Right button:
Selects world
OK Set
Back
time/year/ month/
day/hour/minute/date type
Left button:
Moves the cursor to the [Date&Time] main menu
if the cursor is at the first item of the date and time
setup. In all other instances, the cursor will be
shifted to the left of its current position.
Up/Down button: Changes the value of each item.

For more information about the World Time, refer to the page 73.
LCD monitor indicator
The LCD monitor displays information about the shooting functions and
selections.
1
2
3
00010
X5.0
)
&
Image Size
p.39
p.39
7
Metering
p.40
8
Drive mode
p.40
9
ISO
p.41
10
p.41
9
12
White Balance
Exposure compensation
/LongTime Shutter
Date/Time
Saturation
0
13
14
Sharpness/Mic. off
15
Contrast
p.46
16
Macro
p.32~33
17
Self-timer
p.35~37
18
Flash
Face Detection · Self
Portrait/Photo Style
Selector/Colour
7
8
^
%
c
$
01:00 PM
2008/01/01
#
!
@
<Image & Full Status>
Icons
No.
Description
1
Optical/Digital Zoom bar/
Digital Zoom rate
Page
2
Number of available shots
remaining/Remaining time
00010/00:00:00
p.17
3
Memory card icon/
Internal memory icon
/
-
4
Battery
x 5.0
Page
Image Quality/Frame Rate
6
b
Icons
6
4
a
Description
5
5
(
*
No.
11
19
p.30
p.15
20
p.42~43
/ LT
2008/01/01 01:00 PM
p.73
p.46
/
p.46/24
p.33~35
/
/
p.28~29/
p.44/45
Recording mode
p.11
21
Voice Memo
p.48
22
Auto Focus Frame
p.47
23
Camera shake Warning
p.21
019
Starting the Recording mode
Selecting modes
How to use the Auto mode
You can select the shooting modes by using the mode dial on the upper of
your camera.
Select this mode for quick and easy picture taking with minimal user
interaction.

How to use the mode dial
Select the shooting mode by turning the mode dial to the selection point.
Movie Clip (
Multi Media (
) mode
) mode
Select point
Scene mode
Portrait (
) mode
Auto mode
Photo help guide mode
Program mode
(
) DIS (Digital Image
Stabilization) mode
1. Insert the battery (p.15) taking note of
00010
the correct polarity (+/-).
2. Insert the memory card (p.15). As
this camera has a 34MB internal
memory, it is not essential to insert the
memory card. If the memory card is not
01:00 PM
inserted, an image will be stored in the
2008/01/01
internal memory. If the memory card is
inserted, an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera. (If the date/time that
is displayed on the LCD monitor is incorrect, reset the date/time before
taking a picture.)
5. Select the Auto mode by using the mode dial.
6. Point the camera towards the subject and compose the image.
7. Press the Shutter button to capture an image.


020
If the auto focus frame turns to red when you press the Shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is less
likely to capture an image clearly.
Avoid obstructing the lens or the flash when you capture an
image.
Starting the Recording mode
How to use the Program mode

Selecting the automatic mode will configure the camera with optimal
settings and you can manually configure various functions.
1. Select the Program mode by using the
00010
mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
01:00 PM
image.
2008/01/01
 Refer to page 37-42 for more information about the Program mode
menus.
Things to watch out for using the DIS mode
– The digital zoom will not operate in the DIS mode.
– If the lighting conditions are brighter than fluorescent lighting conditions,
the DIS will not activate.
– If the lighting conditions are darker than in fluorescent lighting
conditions, camera shake warning indicator ( ) will be displayed. For
best results only take pictures in situations where the camera shake
warning indicator ( ) is not displayed.
– If the subject is moving, the captured image may be blurred.
– For best results, avoid moving the camera while the [Capturing]
message is displayed.
– As the DIS uses the camera’s digital signal processor, it may take a little
longer for the camera to process and save the images.
– If the image size is ( ) or ( ) ,the DIS mode can’t be selected.
How to use the DIS(Digital Image Stabilization) mode
This mode will reduce the effect of camera shake and help you get a well
exposed image in dim conditions.
1. Select the DIS mode by using the
mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
00010
01:00 PM
2008/01/01
021
Starting the Recording mode
Using the Photo Help guide mode
Helps the user learn the correct picture taking method and includes
solutions for potential problems that may occur. This also enables the user
to practice the best way to take pictures.

Function that can be used when focusing is difficult
Available functions of the photo help guide
 Function that can be used when focusing is difficult
 Function that can be used when the image is blurred
 Function that can be used when filming in the dark
 Function that can be used when adjusting the picture
brightness
 Function that can be used when adjusting the picture colour
1/2
Guide List
Features to use when the image is ou
2. Features to counter camera shake
3. Features to use in low light conditions
4. Features to use when adjusting bright
5. Features to use when adjusting colours
Pressing the
Left Right button.
Left/
Back
Next
Move
1. Features to use when the image is ou
Half press shutter button to focus
b. To focus on a subject 80cm or more a
c. To focus on a subject less than 80cm
d. To focus on a subject less than 5cm a
e. To focus on people’
s faces
1.a Half press shutter button to focus
Pressing the
Left Right button.
Left/
Next
Focusing status can be checked
by half-pressing shutter button
- Green: Focusing successful
- Red: Focusing failed
Back
Practice
Pressing the MENU button.
00010
Pressing the
Up/Down button.
00010
2/2
1.a Half press shutter button to focus
Pressing the
Shutter button.
MENU
022
Guide List
Practice begins
when you press the
shutter.
MENU
Guide List
Pressing the
Right button.
When focusing is successful, fully
press the shutter button to shoot.
If focusing fails, half press the
button again.
Back
Practice
Starting the Recording mode
How to use the Portrait mode ( )
Selecting the portrait mode will configure the camera with optimal settings
for portrait photography.
1. Select the Portrait mode by using the
mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
00010

The scene modes are listed below.
Icons
Scene modes
Nightscene
Children
Landscape
Close up
01:00 PM
2008/01/01
Text
How to use the Scene modes
Use the menu to easily configure optimal settings for a variety of shooting
situations. (p. 50)
1. Select the Scene mode by using the
mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
Sunset
For taking pictures of sunsets.
Dawn
Daybreak scenes.
Portrait without shadows caused by
backlight.
Firework scenes.
For ocean, lake, beach and snowscape
scenes.
Use when the photographer would also
like to appear in the image.
For taking delicious looking food.
For taking pictures in cafes and
restaurants.
Backlight
Firework
Beach&Snow
00010
Self Shot
Food
Café
01:00 PM
2008/01/01
LT
Description
Use this for shooting still images at night
or in other dark conditions.
To take a picture of fast moving objects,
for example, children.
To take pictures of distant scenery.
Close-up shooting for small objects such
as plants and insects.
Use this mode to shoot a document.
023
Starting the Recording mode
How to use the Movie clip mode
A movie clip can be recorded for up to 2hours.
1. Select the Movie clip mode by using
00:01:01
the mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button once and movie
STANDBY
clips are recorded for up to 2 hours. Movie
clips will still be recorded if the Shutter
button is released.
If you wish to stop recording, press the Shutter button again.
 Image size and type are listed below.
– Image size: 800x592, 640x480, 320x240
– Movie clip file type: AVI (MPEG-4)
– Frame Rate: 30FPS, 20FPS, 15FPS
– The frame rate can be selected when the following image size is
selected.
800x592: 20FPS selectable
640x480, 320x240: 30FPS, 15FPS selectable
024
Recording the movie clip without sound
You can record the movie clip without sound.
Steps from 1-3 are the same as those for
Movie clip mode.
4. Press the MENU button.
5. Select the [RECORDING] menu by
pressing the Left/
Left Right button.
6. Press the Down button to select the
[Voice Mute] menu and press the Right
button.
7. Select the [On] menu by pressing the
Up/Down button.
8. Press the OK button. You can record a
movie without sound.
RECORDING
Voice Mute
Back
Off
On
OK Set
00:01:01
STANDBY
Starting the Recording mode
Pausing while recording a movie clip (Successive Recording)
How to use the Multimedia mode
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite
scenes into a movie clip without having to create multiple movie clips.
Multimedia mode support the embedded MP3, TextViewer, and PMP(Portable
Media Player) program.

Using Successive Recording
Steps from 1-2 are the same as those for Movie clip mode.
3. Point the camera towards the subject and compose the image by
using the LCD monitor. Press the Shutter button and movie clips are
recorded for as long as the available recording time. Movie clips will still
be recorded if the Shutter button is released.
4. Press the Play & Pause (
) button
to pause recording.
5. Press the Play & Pause (
) button
again to resume the recording.
6. If you wish to stop recording, press the
Shutter button again.
00:00:18
REC
1. Select the [Multimedia] mode by using
the mode dial. (p.20)
2. Select the [MP3], [PMP], or
[TextViewer] mode and then press the
OK button.
3. The selected file is played back by your
camera.
MULTIMEDIA
MP3
In this mode you can play MP3 files.
For more detailed information about how to use the Multimedia
mode, see page 82, “MP3 / PMP / TEXT VIEWER mode.”
SH Stop
025
Things to watch out for when taking pictures

Pressing the Shutter button down half way.
Lightly press the Shutter button to confirm focus and flash battery charge.
Press the Shutter button all way down to take the picture.
<Lightly press the Shutter button>



<Press the Shutter button down all
the way>
The available memory capacity may vary depending on shooting
conditions and camera settings.
When the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator ( ) may appear on the
LCD monitor. In this case, use a tripod, support the camera on a solid
surface or change to flash shot mode.
It is best to take pictures with the sun in the background. Taking pictures
against the sun may make the picture come out dark. To take a picture
against the light, please use the [Backlight] in scene shooting mode (see
page 23), fill-in flash (see page 34), spot metering (see page 40), exposure
compensation (see page 42) or ACB (see page 48) function.
026



Avoid obstructing the lens or the flash when you capture an image.
Compose the image by using the LCD monitor.
Under certain conditions the auto focus system may not perform as
expected.
– When photographing a subject that has little contrast.
– If the subject is highly reflective or shiny.
– If the subject is moving at high speed.
– When there is strong reflected light, or when the background is very
bright.
– When the subject matter has only horizontal lines or the subject is very
narrow (such as a stick or flagpole).
– When the surroundings are dark.
Focus lock
To focus on a subject not positioned in the centre of the picture, use the
focus lock function.

Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the Shutter button halfway. When the green auto focus frame
lights up, it means the camera is focused on the subject. Be careful
not to press the Shutter button all the way down to avoid taking an
unwanted picture.
3. With the Shutter button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press the
Shutter button completely to take the picture. If you release your finger
from the Shutter button, the focus lock function will be cancelled.
00010
00010
F 3.5
1/45s
01:00 PM
2008/01/01
1. The image to be
captured.
Using the camera buttons
to set the camera
The recording mode function can be set up by using the camera buttons.
POWER button
Used for turning the camera’s power on/off.
If there is no operation during the specified
time, the camera’s power will be turned off
automatically to save battery life.
Refer to page 77 for more information about
the auto power off function.
00010
F 3.5
1/45s
01:00 PM
2008/01/01
2. Press the Shutter
button halfway and
focus on the subject.
01:00 PM
2008/01/01
3. Recompose the
picture and fully
depress the Shutter
button.
027
Shutter button
FD (Face Detection) button
Used for taking an image or recording voice in the Recording mode.
This mode detects the face position of the subject automatically and then
sets the focus and exposure. Select this mode for quick and easy portraits.
In MP3 and PMP mode, this button will lock the camera buttons.


In Movie clip mode
Pressing the Shutter button down fully starts the process for recording
a movie clip. Press the Shutter button once and the movie clip is
recorded for as long as the available
recording time in the memory allows.
If you wish to stop recording, press the
Shutter button again.
In Still image mode
Pressing the Shutter button down
halfway activates the autofocus and
checks the condition of the flash.
Pressing the Shutter button down fully takes and stores the image.
If you select voice memo recording, the recording will start after the
camera has finished storing the image data.

Selectable modes: Auto, Portrait, Program, DIS, Scene ([Children],
[Beach & Snow], [Self-shot], [Cafe])
1. Press the FD (Face Detection) button
( ) in the selectable modes. The FD
icon will be displayed on the left side of
the screen.
00010
01:00 PM
2008/01/01
2. The size and position of the auto focus
frame is automatically set on the face of
the subject.
3. Press the Shutter button halfway.
The focus frame turns to green when the
focus is activated.
4. Press the Shutter button fully to take a
picture.
028
00010
01:00 PM
2008/01/01
FD (Face Detection) button









This function can detect up to 9 people.
When the camera recognises many people at the same time, it
will focus on the nearest person.
The Digital zoom is not activated in this mode.
The effects functions are not activated in this mode.
When the camera detects a target face, the white colour focus
frame will be displayed over the target face and the gray colour
focus will appear over the remaining faces (up to 8). Press the
Shutter button halfway down to focus on the face and the white
focus frame turns green. (Total 9)
Return to previous AF mode if face detection failed.
In some conditions this function cannot work properly.
– When a person wears dark glasses or some part of the face is
hidden.
– When the subject does not look at the camera.
– When the camera doesn’t detect a face because of too much
or too little light.
– There is too great a distance between the camera and the
subject.
The maximum available Face Detection range is 3m (Wide).
The nearer the subject, the faster the camera can recognize the
subject.
■ Self Portrait
When taking pictures of yourself, the area of your face is automatically
detected so that you can take self portraits more easily and quickly.
 Selectable modes: Auto, Portrait, Program, DIS, Scene ([Children],
[Beach & Snow], [Self-shot], [Cafe])
1. When pressing the Face Detection button again on the face location
screen, the Self Portrait icon ( ) appears.
00010
00010
Pressing the
FD button
01:00 PM
2008/01/01
01:00 PM
2008/01/01
2. For self-filming, set the camera lens towards the face of the object.
It automatically detects the face of the object, and emits a guiding
sound.
3. Start filming by pressing the Shutter button.




When locating the face in the center of the screen, it repeatedly
emits a faster sound unlike the sounds that are emitted when
the face is not in the center.
The guiding sound can be set using the sound setting menu.
(p.71)
If [Self Portrait] is set, it is fixed to Macro focus.
If [Self Portrait] is set, Motion Timer cannot be selected.
029
ZOOM W / T button
If the menu is not displayed, this button
works as the OPTICAL ZOOM or DIGITAL
ZOOM button. This camera has a 3X optical
zoom and a 5X digital zoom function. Using
both will offer a total zoom ratio of 15X.


WIDE Zoom
Optical zoom WIDE: Pressing the Zoom W button. This will zoom out
from the subject i.e. the subject will appear further
away. Pressing the Zoom W button continuously will
set the camera to its minimum zoom setting i.e. the
subject appears at its furthest from the camera.
TELE Zoom
00010
Optical zoom TELE: Pressing the Zoom T button. This will zoom into the
subject i.e. the subject will appear nearer.
Digital zoom TELE: When the maximum (3X) optical zoom is selected,
pressing the Zoom T button activates the digital
zoom software. Releasing Zoom T button stops the
digital zooming at the required setting. Once the
maximum digital zoom (5X) is achieved, pressing
the Zoom T button will have no effect.
00010
01:00 PM
2008/01/01
<WIDE zoom>
Pressing
the
Zoom T
button
00010
01:00 PM
2008/01/01
<TELE zoom>
Pressing
the
Zoom T
button
X5.0
00010
01:00 PM
2008/01/01
01:00 PM
2008/01/01
00010
Pressing
the
Zoom W
button
01:00 PM
2008/01/01
<TELE zoom>
00010
01:00 PM
2008/01/01
<Optical zoom 2X>
<WIDE zoom>
Digital zoom WIDE: When the digital zoom is in operation, pressing the
Zoom W button will reduce the digital zooming
Optical zoom
in steps. Releasing Zoom W button stops
X 5.0 digital zooming. Pressing the Zoom W button
will reduce the digital zoom and then it will
Digital zoom
continue to reduce the optical zoom until the
minimum setting is reached.
X5.0
00010
<Digital zoom 5.0X>
01:00 PM
2008/01/01
<Digital zoom 5.0X>
030
Pressing
the
Zoom W
button
Pressing
the
Zoom W
button
00010
01:00 PM
2008/01/01
<TELE zoom>
Pressing
the
Zoom W
button
00010
01:00 PM
2008/01/01
<WIDE zoom>
ZOOM W / T button







Images taken using the digital zoom may take a little longer for
the camera to process. Allow time for this to take place.
The digital zoom cannot be used in movie clip shots.
You may notice a decrease in image quality when using the
digital zoom.
To view a clearer digital zoom image, press the Shutter button
halfway at the maximum optical zoom position and press the
Zoom T button again.
The digital zoom can’t be activated in the face detection
mode, DIS mode, movie clip mode, and some scene modes
(Nightscene, Children, Text, Close-up, Fireworks, Food).
Take care not to press the lens as this may cause a camera
malfunction.
The movie clip might be recorded with zooming sound while
using the zoom button.
Function Description / Info (
) / Up button
While the menu is showing, the Up button operates as a direction button.
If the menu screen does not appear, information or function descriptions
of the current filming image (filming mode) can be accessed through the
liquid crystal monitor by pressing the Function description / Information
( ) button.
00010
00010
00010
Display the basic information.
Display description for
each feature.
<Information screen>
<Function description screen>
Display every piece of information
about shooting.
01:00 PM
2007/08/01
<Filming screen>

Function description: When pressing the Function description button on the information
screen mode, detailed descriptions of the functions can be
viewed. The function description can be cancelled by pressing the
Function description button again.
00010
00010
Pressing
the Function
description
button
Display description for each feature.
Pressing
the
Fn button
SIZE
Set the photo size.
<Examples of Function descriptions>
031
Macro ( ) / Down button
While the menu is showing, press the Down button to move from the main
menu to a sub menu, or to move down the sub menu. When the menu is
not showing, you can use the Macro/Down button to take macro pictures.
The distance ranges are shown below. Press the Macro button until the
desired macro mode indicator appears on the LCD monitor.

Types of focus mode and focus range (W: Wide, T: Tele)
Mode
Auto(
Focus Type
Focus range
Super macro(
)
–
Mode
01:00 PM
2007/08/01
<Auto Focus>
01:00 PM
2007/08/01
<Macro (
00010
00010
Super macro(
Focus range
W: 1 ~ 5
(Wide only)
Focus range

01:00 PM
2007/08/01
<Auto Macro (
032
)>
01:00 PM
2007/08/01
<Super Macro (
)>
)

Super macro(
–
Macro(
)
Normal
W: 80 ~ Infinity
T: 80 ~ Infinity
)
Normal
)
W: 5 ~ 80
T: 40 ~ 80
Mode

)
Program(
Focus Type
Focus Type
)>
)
Auto macro(
W: 5 ~ Infinity
T: 40 ~ Infinity
00010
00010
(Unit: cm)
W: 80 ~ Infinity
T: 80 ~ Infinity
DIS mode(
)
Auto macro(
)
W: 5 ~ Infinity
T: 40 ~ Infinity
Normal
W: 80 ~ Infinity
T: 80 ~ Infinity
When the macro mode is selected, be particularly careful to
avoid camera shake.
When you take a picture within 30cm (Wide zoom) or 50cm
(Tele zoom) in the Macro mode, select the FLASH OFF mode.
When you take a picture within the 5cm Super macro range,
the autofocus on the camera will take longer to set the correct
focus distance.
Macro ( ) / Down button

Flash ( ) / Left button
Available focusing method, by Recording mode
(: Selectable, ∞: Infinity focus range)
Mode
Auto macro
Super macro
Macro



Normal



When the menu is displayed on the LCD monitor, pressing the Left button
makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the Left button
operates as the Flash( ) button.


1. Press the Mode button to select a Recording mode with the exception
of the Movie clip mode or the DIS mode. (p.20)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor. Use the
correct flash to suit the environment.


Mode
Auto macro




SCENE
Super macro
Macro
Normal


Selecting the flash mode

Flash range

ISO


AUTO



(Unit: m)
Normal
Macro
Auto macro
WIDE
TELE
WIDE
TELE
WIDE
TELE
0.8 ~ 3.4
0.8 ~ 2.7
0.3 ~ 0.8
0.5 ~ 0.8
0.3 ~ 3.4
0.5 ~ 2.7
When the Super Macro is selected, flash is fixed as the Flash Off mode.

∞




033
Flash ( ) / Left button







034
If you press the Shutter button after selecting the Auto, Fill-in,
Slow synchro flash, the first flash fires to check the shooting
condition (Flash range and Power ratio of flash). Do not move
the camera until the second flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for
the flash is usually within 4 seconds. If the battery is weak, the
charging time will be longer.
In the DIS mode, [Landscape], [Close up], [Text], [Sunset],
[Dawn], [Firework], [Self Shot], [Food], [Café] scene modes
and the Movie clip mode, the flash function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close
or highly reflective.
When taking an image in poorly lit conditions with the flash,
there may be a white speck in the captured image. The speck
is caused by the the flash light reflecting off atmospheric dust.

Flash mode indicator
Icon
Flash mode
Auto flash
Description
If the subject or background is dark, the
camera flash will operate automatically.
If a subject or background is dark, the
Auto & Red eye camera flash will work automatically and will
reduction
reduce the red-eye effect by using the redeye reduction function.
Fill in flash
The flash fires regardless of the available
light. The intensity of the flash will be
automatically controlled to suit the prevailing
conditions.
Slow synchro
The flash operates with a slow shutter speed
to obtain a balanced correct exposure. In
poor lighting conditions the camera shake
warning indicator ( ) will appear on the
LCD monitor.
Flash off
The flash does not fire.
Select this mode when capturing images in
a place or situation where flash photography
is prohibited. When you capture an image
in poorly lit conditions, the camera shake
warning indicator ( ) will appear on the
LCD monitor.
Red-eye
reduction
When a shot with “red eye” is detected,
this mode will reduce the red-eye effect
automatically.
Flash ( ) / Left button

Self-timer (
Available flash mode, by Recording mode





(: Selectable)





) / Right button
When the menu is displayed on the LCD monitor, pressing the Right button
makes the cursor shift to the right tab. When the menu is not displayed on
the LCD monitor, the Right button operates as the
Self-timer ( ) button. This function is used when the photographer would
also like to be in the image.
























If you operate the Self-timer( ) button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
In Movie Clip mode, only the 10SEC self-timer will work.
When you select 2SEC self-timer with flash, the delay
(2 seconds) can be extended according to the flash charging
status.
If Motion Timer is set, [Self Portrait] cannot be selected.









035
Self-timer (

) / Right button
Selecting the self-timer

1. Select a Recording mode with the
exception of Voice recording mode.
(p.20)
00010
2. Press the Self-timer ( ) button until
the desired mode indicator displays on
the LCD monitor.
01:00 PM
2007/08/01
3. When you press the Shutter button, the
picture will be taken after the specified <Selecting the 10 SEC self-timer>
time has elapsed.
Motion
Self-timer Mode
Description
Pressing the Shutter button will allow an
10SEC self-timer interval of 10 seconds before the image is
taken.
2SEC self-timer
Pressing the Shutter button will allow an
interval of 2 seconds before the image is taken.
A picture will be taken after about 10 seconds
Double self-timer and 2 seconds later a second picture will be
taken.
Motion Timer
036
The camera detects the subject’s movement
6 seconds after pressing the Shutter button,
and the picture is taken when the movement is
stopped.
Icon & Self-timer lamp
Pressing the Shutter button after
setting the Motion Timer
Blink (1 second interval)
Detecting the subject’s
movement
Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken after
2 seconds.

Icon
Motion Timer
The Motion Timer flows are as follows. (Movie Clip mode excluded)
Selecting the Motion Timer  Pressing the Shutter button  Confirming
the composition (Within 6 sec.)*1  Starting the detection (Swing your
hands fully)*2  Stopping the detection (Do not move)  Taking an image
(after 2 sec.)
*1: The camera detects the subject’s movement 6 seconds after pressing
the Shutter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
Self-timer (
) / Right button
In the following cases, the Motion Timer may not operate.
 The focus distance is over 3m.
00010
 The exposure is too bright or
dark
 In backlight conditions.
 The movement is insignificant
 The movement is detected
01:00 PM
beyond the center part (50%)
of the sensor where the movement
<The detection range of
is recognized.
Motion Timer>
 If the camera doesn`t sense detect
MENU / OK button

MENU button
– When you press the MENU button, a menu related to each camera
mode will be displayed on the LCD monitor. Pressing it again will return
the LCD to the initial display.
– A menu option can be displayed when the following are selected:
Movie clip, Auto, Program, DIS, and Scene mode. There is no menu
available when the Voice recording or Photo Help Guide mode is
selected.
00010
Pressing the
MENU button
any movement for 25 seconds, or
the camera doesn’t dectect stillness
after sensing movement.
01:00 PM
2007/08/01
<Menu off>

RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Move
Center AF
Off
Off
MENU Exit
<Menu on>
OK button
– When the menu is displayed on the LCD monitor, this button is used for
shifting the cursor to the sub menu or for confirming data.
037
Fn button
How to use the Fn menu
You can use the Fn button to set the following menus.
(: Selectable)
Page
SIZE






p.39
QUALITY/
FRAME RATE






p.39
METERING

DRIVE

p.40
p.41


ISO




p.41
EXPOSURE
VALUE



p.42
*1
*1 This menu is only available in the Night scene mode (
038
p.43

).
QUALITY
SIZE
p.40
WHITE
BALANCE
LONG TIME
SHUTTER
1. Press the Fn button in an available mode
2. Select a desired menu by pressing the Up/Down button. And then a
sub menu will be displayed on the bottom left side of the LCD monitor.
Up/Down
button
3. Select a desired menu by pressing the Left/
Left Right button and then
press the OK button.
SIZE
7M P 3264x2176
Left Right
Left/
button
Fn button: Size
Fn button: Quality / Frame rate
You can select the image size appropriate for your application.
You can select the compression ratio appropriate for your application
of the captured images. The higher the compression ratio, the lower the
picture quality.
Still
image
Mode
Icon
Movie
clip
Mode
Icon
Size
3264x
2448
Size
3264x
2176
800x592
3264x
1836
2592x
1944
640x480
2048x
1536
1024x
768
320x240
Mode
Still image Mode
Sub menu
Super Fine
Fine
File Format
jpeg
jpeg
Fine
8M 3264x2448

Normal 30FPS 20FPS 15FPS
jpeg
avi
avi
avi
20FPS
800 x 592
< Still image mode >
< Still image mode >
Movie clip mode
Icon
< Movie clip mode >
< Movie clip mode >
The higher the resolution, the lower the number of shots
available because high resolution images require more
memory.


This file format complies with the DCF (Design rule for Camera
File system).
JPEG (Joint Photographic Experts Group):
JPEG is the image compression standard developed by the
Joint Photographic Experts Group. This type of compression
is most commonly used for compressing photos and graphics
because it can compress the files efficiently.
039
Fn button: Metering
Fn button: Drive mode
If you cannot obtain suitable exposure
conditions, you can change the metering
method to take brighter pictures.
Icon

Metering
Mode
Multi
Single
Description
Multi
Exposure will be calculated based on an average
of light in each image area divided into multiple
regions. However, the calculation will be biased
towards the centre of the image area. This is
suitable for general use.
Spot
Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable
when the subject in the centre is exposed correctly,
regardless of the back lighting.
Center
Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the centre of the
image area. This is suitable for taking a picture of
small objects like flowers or insects.
If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance, it is
better to use exposure compensation.
040
You can select continuous shot, and AEB
(Auto Exposure Bracketing).
Icon
Drive Mode
Description
Single
Take one picture only.
Images will be taken continuously until the Shutter
Continuous
button is released.
This takes 6 shots per second for up to 5 seconds,
when the shutter is pressed and held down. After
Motion
completing the continuous shooting, images are
Capture
saved automatically. The maximum number of shots
is 30 and the image size is fixed as VGA.
Take three pictures in a series in different
AEB
exposures: standard exposure (0.0EV), short
exposure (-1/3EV) and over exposure (+1/3EV).




High resolution and picture quality increases file saving time,
which increases stand-by time.
If the [Continuous], [Motion Capture] or [AEB] sub menu is
selected, the flash will be off automatically.
If less than 30 pictures are available in the memory, the motion
capture is not available.
It is best to use a tripod for the AEB shooting as the time to
save each image file is longer and blurring caused by camera
shake may occur.
Fn button: ISO
Fn button: White balance
You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
The white balance control allows you to adjust the colours to appear more
natural.
Auto
Icon
ISO Mode
Auto
ISO 80
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200

Auto WB
Description
Icon
The camera’s sensitivity is automatically changed
by variables such as lighting value or subject
brightness.
White balance
Mode
Auto WB
You use a faster (shorter) shutter speed while the
same amount of light is present, by increasing the ISO
sensitivity amount of light is present, by increasing the
ISO sensitivity. However, the image may be saturated
in high luminance. The higher the ISO value, the higher
the camera’s sensitivity to light and therefore the greater
its capacity to take pictures in dark conditions. However,
the noise level in the image will increase as the ISO
value increases, making the image appear coarse.
Daylight
Cloudy
Fluorescent_H
Fluorescent_L
Tungsten
Custom Set
When the ISO 3200 menu is selected, the image size is fixed as 3M.

Description
The camera automatically selects the
appropriate white balance settings, depending
on the prevailing lighting conditions.
For taking images outside.
For taking images under a cloudy or overcast
sky.
For shooting under daylight fluorescent types
of threeway fluorescent lighting.
For shooting under white fluorescent lighting.
For shooting under tungsten (standard light
bulb) lighting.
Allows the user to set the white balance
according to the shooting conditions.
Different lighting conditions may cause a colour cast on your images.
041
Fn button: White balance

Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for
a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM ( ) menu of the
White Balance and place a sheet of
white paper in front of the camera so
that the LCD monitor shows only white.
2. MENU/OK
OK button: Selects previous
custom white
balance.
White paper
Shutter button: saves new custom white balance.
– The custom white balance value will be applied, starting with the
next picture you take.
– The user configured white balance will be remain effective until it is
overwritten.
Fn button: Exposure compensation
This camera automatically adjusts the exposure according to the ambient
lighting conditions.
You can also select the exposure value by using the Fn button.

Compensating Exposure
1. Press the Fn button, and then use the
Up/Down button to select the exposure
compensation (
) icon. The exposure
compensation menu bar will appear as
shown.
EXPOSURE VALUE
2. Use the Left/
Left Right button to set the
-2
-1
0
+1
+2
desired exposure compensation factor.
0
3. Press the Fn button again. The value you set will be saved and the
Exposure Compensation setup mode will close. If you change the
exposure value, the exposure indicator (
) will be displayed on the
bottom of the LCD monitor.

042
A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor should appear white or you may not
get good pictures.
Fn button: Long time shutter
This camera automatically adjusts the shutter speed and aperture values
to the shooting environment. However, in Night scene mode, you can set
the shutter speed and aperture values to your preference.

Changing the Shutter speed and Aperture
value
1. Select the [Nightscene] mode. (p.23)
2. Press the Fn button and Long Time
shutter menu will be displayed.
3. Configure the Long Time shutter value
with the 5 function button.
4. Press the Fn button again. The value
you set will be saved and the mode will
switch to Night scene mode.
LONG TIME SHUTTER
F 3.5
1S
Aperture Value
Wide: Auto, F3.5 ~ 6.2
Tele: Auto, F4.5 ~ 8.0
Shutter Speed
Auto, 1 ~ 16S
043
E (Effect) button
It is possible to add special effects to your images by using this button.

Available Effects, by recording mode
Mode
E button

(: Selectable)
Mode
E button
E (Effect) button: Photo Style
Selector
You can add various effects to the image
without an image editing software.
Press the E button in an available mode.
Soft


Move








This button will not operate in DIS, Voice recording mode and
some scene modes ([Nightscene], [Text], [Sunset], [Dawn],
[Backlight], [Firework], [Beach&Snow]).
Even if the camera is turned off, the effect setting will be
preserved.
Icon
Style mode
Description
Normal
No style effect is added to the image.
Soft
The image will be applied with soft colours.
Vivid
The image will be applied with vivid colours.
Forest
The image will be applied with clear natural
colours.
Retro
The image will be applied in a sepia tone.
Cool
The image will be applied with cool colours.
Calm
The image will be applied with calm colours.
Classic
044
Exit
1. Select the desired Photo style selector by pressing the Left/
Left Right
button and press the OK button.
2. Press the Shutter button to take an image.


E
The image will be applied with classic colours.
E (Effect) button: Image editing
Press the E button in the [Program], [Movie], [Portrait], [Children],
[Close up], [Self Shot], [Food] and [Café] scene modes.

Custom colour: You can change the R
(Red), G (Green) and B (Blue) values of
the image.
Color
Colour
1. Select the Color(
) menu by pressing
the Up/Down button.
2. Select the desired sub menu by
pressing the Left/
Left Right button and
press the OK button.
3. Press the Shutter button to take an
image.
Icon
COLOR
Normal
Move
Move
OK Set
Captured images will be stored in black and white.
Sepia
Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
Red
Blue
Negative
– OK button: Selects / sets up the Custom
Colour
– Up/Down button: Selects R, G, B
– Left/
Left Right button: Changes the values
Color
Description
No colour effect is added to the image.
B/W
Green
OK Set
Color
Move
OK Set
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Saves the image in negative mode.
Custom Color Captured image will be saved in set RGB tone.
045
E (Effect) button: Image editing
Sharpness
Press the E button in the [Program] mode.
1. Select the Sharpness(
) menu by
pressing the Up/Down button and a
bar for selecting the sharpness will be
displayed.
2. Change the sharpness by pressing the
Left Right button.
Left/
3. Press the Shutter button to take an
image.
Saturation
1. Select the Saturation(
) menu by
pressing the Up/Down button and a
bar for selecting the saturation will be
displayed.
2. Change the saturation by pressing the
Left Right button.
Left/
3. Press the Shutter button to take an
image.
Saturation
Move
OK Set
Contrast
1. Select the Contrast( ) menu by
pressing the Up/Down button and a
bar for selecting the contrast will be
displayed.
2. Change the contrast by pressing the
Left Right button.
Left/
3. Press the Shutter button to take an
image.
046
Contrast
Move
OK Set
Sharpness
Move
OK Set
Using the LCD monitor to adjust the
camera settings
You can use the menu on the LCD monitor to set up recording functions.

The items indicated by
Menu
Sub menu
Available mode
Multi AF
p.47
ACB
Off
On
p.48
Voice Mute
Scene
mode
Off
Off
p.50
Nightscene
Children
Close up
Text
Sunset
Dawn
Backlight
Firework
-
Focus Area
Center AF
Multi AF
p.49
On
Beach&Snow Self Shot
Back
p.48
On
-
Café

RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Page
Center AF
Voice
Record
You can select your preferred Focus Area according to the shooting
conditions.
are default settings.
Focus Area
Voice
Memo
Focus Area
Landscape

Center AF
Multi AF
OK Set
Description
The rectangular area in the center of the LCD
monitor will be focused.
This camera selects all available AF points of the
LCD monitor.
When the camera focuses on the subject, the auto focus frame turns to
green. When the camera doesn’t focus on the subject, the auto focus
frame turns to red.
p.50
Food
-
Menus are subject to change without prior notice.
047
ACB
Voice Memo
This function is to adjust the contrast automatically when taking photos in
an environment with big exposure difference i.e. backlight or contrast. This
function adjusts the brightness automatically and allows the subject to be
photographed clearly.
You can add your voice-over to a stored still
image. (Max. 10 sec.)
- [ACB] Sub menus: [Off], [On].
RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Back




RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Back
Off
On
OK Set
When using the [Auto], [Program] mode and [Portrait] mode, the ACB
function will operate.
ACB function always operates in the [Auto] recording and [Portrait]
mode.
When using the [Continuous], [Motion Capture], and [AEB] menu, the
ACB function will not operate.
When the ACB function is selected, you cannot select a high ISO 400
or higher.
Off
On
OK Set
– If the voice memo indicator is displayed
on the LCD monitor, the setting is
completed.
– Press the Shutter button and take a
picture. The picture is stored on the
memory card.
0
01:00 PM
2007/08/01
– Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the Shutter button
will stop the voice memo.
0
00:00:03
SH STOP
048
Voice recording
A voice can be recorded for as long as the
available recording time (Max. 10 hour)
allows.
Press the Shutter button to record a voice.
– Press the Shutter button once and voice
is recorded for as long as the available
recording time (max:10 hour) allows.
The recording time will be displayed
on the LCD monitor. Voice will still be
recorded if the Shutter button is released.
– If you wish to stop recording, press the
Shutter button again.
– File type: *.wav

RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Center AF
Off
Off
Pausing while recording a voice
Using this function, you can record your
favourite voice clips into a voice recording
file without having to create multiple voice
recording files.
00:00:06
SH
Move
OK Set
00:01:00

REC
MENU Exit
<Voice recording mode>
REC
1. Press the Play & Pause (
) button
<Pausing the voice recording>
to pause recording.
2. Press the Play & Pause (
) button again to resume the recording.
3. If you wish to stop recording, press the Shutter button again.
00:00:00
SH
Stop

A distance of 40cm between you and the camera (microphone)
is the best distance to record sound.
If the camera power is turned off while the voice recording is
paused, the voice recording is cancelled.
049
Recording the movie clip without voice
Starting play mode
You can record the movie without voice.
Select [Voice Mute] menu in the Movie
clip mode. (p. 24)
( ) icon will appear on the LCD monitor.
Press the Shutter button and a movie will
record for as long as the memory capacity
allows without voice.
RECORDING
Voice Mute
Back
Off
On
OK Set
00:01:01
Turn the camera on and select Play mode by pressing the Play mode ( )
button. The camera can now play back the images stored in the memory. If
the memory card is inserted in the camera, all the camera functions apply
only to the memory card. If the memory card is not inserted in the camera,
all the camera functions apply only to the internal memory.
Playing back a still image
1. Select the Play mode by pressing the
Play mode button.
STANDBY
2. The last image stored on the memory is
displayed on the LCD monitor.
SCENE mode
Use the menu to easily confi gure optimal settings for a variety of shooting
situations.
Press the MENU button and select a
desired sub menu.
 Refer to page 23 for more information.
RECORDING
Scene Mode
Focus Area
Voice Memo
Voice Record
Back
050
Nightscene
Children
Landscape
Close up
Text
Sunset
OK Set
3. Select an image that you want to view
by pressing the Left/
Left Right button.
 Press and hold the Left or Right
button to play back the images
quickly.
100-
Starting play mode
Playing back a movie clip
1. Select the recorded movie clip that
100-0010
you want to play back by using the
Left Right button.
Left/
2. Press the Play & Pause (
) button
to playback a movie clip file.
– To pause a movie clip file while
00:00:02
playing it back, press the Play &
Play
E Capture
Pause (
) button again.
– Pressing the Play & Pause (
)
button again will cause the movie clip
file to restart.
– To rewind the movie clip while it is
playing, press the Left button. To
fast forward the movie clip, press the
Right button.
– To stop playback of the movie clip, press the Play & Pause (
)
button, and then press the Left or Right button.
Movie clip capture function
You can capture still images from the movie clip.

How to capture the movie clip
1. Press the Play & Pause (
) button
while playing the movie clip. Then press
the E button.
2. The paused movie clip is saved in a
new file name.
 The captured movie clip file is the same
size as the original movie clip (800x592,
640x480, 320x240).
 When you press the E button at the
beginning of the movie clip, the first
frame of the movie clip will be saved as
a still image.
00:00:24
T
Trim
E Capture
<Paused>
<Press the E button>
051
Starting play mode
On camera movie trimming
You can extract desired frames of movie
clip during the movie clip play back. If the
running time is under 10 seconds, the movie
clip can’t be trimmed.
1. Press the Play & Pause (
) button
00:00:24
at the point of the movie clip where you
T Trim
E Capture
want to start extracting.
2. Press the T button.
3. Press the Play & Pause (
) button
and the extracted range will be
displayed on the status bar.
4. Press the Play & Pause (
) button
00:00:45
once more at the point where you wish
T Trim
the extracted file to stop.
5. Press the T button and a confirmation
window will be displayed.
6. Select a desired sub menu by pressing
Trimming?
No
the Up/Down button and press the OK
Yes
button.
[No]:
The movie trimming will be
cancelled.
[Yes]: The extracted frames are saved as a new file name.

052
If you don’t specify the ending point of the movie clip, the
trimming confirmation window will be displayed at the point of
the last frame.
Playing back a recorded voice
1. Select the recorded voice that you want
100-0017
to play back by using the Left/
Left Right
button.
2. Press the Play & Pause (
) button
to play back a recorded voice file.
– To pause a recorded voice file, while
00:02:51
playing it back, press the Play &
Play
Pause (
) button again.
– To resume playback of the voice file, press the Play & Pause
(
) button
– To rewind the voice file while it is playing, press the Left button.
To fast forward the voice file, press the Right button.
– To stop playback of the voice memo, press the Play & Pause
(
) button and then press the MENU/OK
OK button.
Starting play mode
LCD monitor Indicator
Playing back a voice memo
The LCD monitor displays shooting information about the displayed image.
1. Select a still image that has the voice
memo.
2. Press the Play & Pause (
) button
to play back the voice memo.
– To pause the voice memo, while
playing it back, press the Play &
Pause (
) button again.
– To resume playback of the voice
memo, press the Play & Pause
(
) button.
– To stop playback of the voice memo,
press the Play & Pause (
)
button and then press the MENU/OK
button.
1
100-0010
2
3 4
100-0010
#
@
5
6
7
ISO 80
AV 3.5
!
TV
Flash
Size
Date
100-0010
1/11
Off
3264x2448
2008/01/01
09 8
00:00:06
Pause
100-0010
00:00:06
Play
No.
Description
1
Playback mode
2
Folder name & File name
100-0010
p.76
3
Internal memory icon/
Memory card icon indicator
/
-
4
Battery
5
ISO
80 ~ 3200
p.41
6
Aperture value
F3.5 ~ F8.0
p.43
7
Shutter speed
16 ~ 1/2000
p.43
8
Flash
On/Off
p.33
9
Image size
3264x2448 ~ 320x240
p.39
10
Recording date
2008/01/01
11
DPOF
12
Protect
13
Movie Clip/Voice Memo
Icon
Page
p.50
p.15
p.73
p.67~69
p.66
/
p.24/48
053
Using the camera buttons to set the camera
In Play mode, you can use the buttons on the camera to conveniently set
up the Play mode functions.
Play mode button




If you have turned on the camera by pressing
the POWER button, you can press the Play
mode button once to switch to Play mode
and press it again to switch to Recording
mode.
You can turn the power on with the Play
mode button. The camera is turned on in
play mode. Press the Play mode button again to turn off the camera.
Manner mode: To select the Manner mode, press the Play mode button for
more than 3 seconds. In the Manner mode, Operating sound, Effect sound,
Start-up sound and Shutter sound will not be generated. To cancel the Manner
mode, turn on the camera by pressing the POWER button.
In the PMP, MP3, Text viewer mode, pressing the Play mode button will
display the play list of each mode.
Thumbnail(



) / Enlargement(
) button
You can view multiple pictures, enlarge a selected picture, and crop and
save a selected area of an image.
In the MP3, PMP, Text Viewer, Movie mode, slide show and when playing
back the recorded voice, you can control the volume of multimedia files.
Thumbnail display
1. While an image is displayed on full screen, press the Thumbnail
button.
2. The thumbnail display will highlight the
image that had been showing at the time the
thumbnail mode was selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the Enlargement button.
100-0010
Pressing the
Thumbnail (
button
Pressing the
Enlargement (
button
<Normal display mode>
100-0010
)
)
2
3
5
6
7
8
9
<Thumbnail display mode>
Highlighted image
054
1
4
Using the camera buttons to set the camera

Image enlargement
1. Select an image that you want to enlarge and
press the Enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Pressing the Thumbnail button will zoom back
to the original full sized image.
– You can tell whether the image
displayed is an enlarged view by
x 2.0
checking the image enlargement
indicator shown at the top left of the
LCD monitor. (If the image is not an
enlarged view, the indicator will not
OK
be displayed.) You can also check
the area of enlargement.
– Movie clips and WAV files can’t be enlarged.
– If an image is enlarged, a loss of quality may occur.

The maximum enlargement rate in proportion to the image size
Image size
Maximum
enlargement rate

Trim
X10.2
X9.1
X8.5
X8.1
X6.4
X3.2
Trimming: You can extract part of the image that you want and save it
separately.
1. Select an image that you want to
enlarge and press the enlargement
x 2.0
button. Press the MENU/OK
OK button and
Trimming?
No
a message will be displayed.
Yes
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
OK Confirm
button.
– [No]: The trimming menu will disappear.
– [Yes]: The trimmed image will be saved as a new file name, and
appear on the LCD monitor.
 If there is not enough memory space to save the trimmed image, the
image can’t be trimmed.
055
Info (
) / Up button
When the menu is displayed on the LCD monitor, the UP button operates
as a direction button. When the menu is not displayed on the LCD monitor,
pressing the Info( ) button will display image information on the LCD
monitor.
100-0010
100-0010
Info (
Info (
) button
) button
ISO
AV
TV
Flash
Size
Date
Info (
80
3.5
1/11
Off
3264x2448
2008/01/01
Play & Pause (
In Play mode, the Play & Pause (
)/ Down button works as follows:
– If the menu is displayed
Press the Down button to move from the main menu to a sub menu, or
to move down the sub menu cursor.
– If a still image with a voice memo, a voice file, or a movie clip is playing
·In Stop mode:
Plays a still image with a voice memo, a voice file,
or a movie clip.
·During playback: Temporarily stops playback.
·In Pause mode:
Resumes playback
100-0017
100-0017
100-0017
) button
00:02:51
Play
<Voice recording is stopped>
056
) / Down button
◀
REW
Pause
00:00:05 FF ▶
OK Stop
<Voice recording is playing>
00:00:12
Play
OK Stop
<Voice recording is paused>
Left / Right / Menu / OK button
Left/Right/MENU/OK button activate the following.
– Left button:
While the menu is showing, the Left button operates as
a direction button. While the menu is not showing, press
the Left button to select the previous image.
– Right button: While the menu is showing, the Right button operates as
a direction button. While the menu is not showing, press
the Right button to select the next image.
– MENU button: When you press the MENU button, the play mode menu
will be displayed on the LCD monitor. Pressing it again
will return the LCD to the initial display.
– OK button:
When the menu is displayed on the LCD monitor, the
OK button is used for confirming data that is changed by
using the 5 function button.
Print (
) button
When the camera is connected to a PictBridge printer, you can print
images by pressing the Print button.
100-0010
Delete ( ) button
This deletes images stored on the memory card.
1. Select an image that you want to delete
by pressing the Left/
Left Right button and
press the Delet button.
100-0010
100-0010
Delete image?
1
Delete
image?2
3
No
Yes
5
6
8
9
No
Yes
T
Select
4
7
OK Confirm
OK Confirm
<Single Image>
<Thumbnail Image>
2. To add images to delete, press the
T button.
– Left/
Left Right button: Selects images
– T button: Checks for deletion
– OK button: Deletes the selection
100-0010
Prev ◀
T
Print
OK Menu
Select
▶ Next
OK Delete
3. Select the submenu values by pressing the Up/Down button and then
press the OK button.
– If [No] is selected: Cancels “Delete Image”.
– If [Yes] is selected: Deletes the selected images.
057
E (Effect) button: Resize
Change the resolution (size) of pictures taken. Select [Start image] to save
an image to be the start-up image.
1. Press the Play mode button and press
the E button.
2. Press the Left/
Left Right button and select
the [RESIZE] ( ) menu tab.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.

– Only JPEG images can be resized. Movie clip (AVI), Voice recording
(WAV) files can’t be resized.
RESIZE
– You can change the resolution of only those files compressed in the
JPEG 4:2:2 format.
– The resized image will have a new file name. The [Start Image] image
is stored not on the memory card but on the internal memory.
E
Move
Image Resize Types
8M
(: Selectable)
3M
1M














3M
1M
5MP
7MP
6MW
058
Exit
5M
5M

3MP
– A large sized image can be resized to a smaller sized image, but not
vice versa.
1MP


2MW
1MW


– If a new user image is saved, one of the two user images will be deleted
in order.
– If the memory capacity is insufficient to store the resized image, a
[Memory Full!] message will appear on the LCD monitor and the
resized image can’t be stored.
E (Effect) button: Rotating an image
You can rotate the stored images by various degrees.
Once the playback of the rotated picture is finished, it will switch back to
the original state.
1. Press the Play mode button and press
the E button.
2. Press the Left/
Left Right button and select
the [ROTATE] ( ) menu tab.
3. Select a desired sub menu by pressing
the Up/ Down button.
ROTATE
Back
E
Left 90 ˚
OK Set
< : Right 90˚>:
Rotate picture in a clockwise direction
E
Horizontal
E
Back
Exit
180 ˚
OK Set
< : Left 90˚>:
Rotate picture in a
counterclock-wise direction
It is possible to add colour effects to your images by using this button.
1 Press the Play mode button and press
the E button.
2. Select (
) menu tab by pressing the
Left Right button.
Left/
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
Move
Right 90 ˚
E (Effect) button: Colour
E
Back
OK Set
< : 180˚>:
Rotate picture 180 degrees
Icon
Effect Mode
Back
E
OK Set

E
Back
OK Set
E
Exit
Description
B/W
Sepia
Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
Red
Green
Blue
Custom Color
< : Horizontal>:
Rotate picture horizontally
Move
Captured images will be stored in black and
white.
Negative
Vertical
COLOR
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Save the image in negative mode.
Captured images will be stored in set RGB tone.
4. The changed image is saved as a new file name.
< : Vertical>:
Rotate picture vertically
If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
059
E (Effect) button: Colour

E (Effect) button: Image editing
1. Press the Play button and press the E button.
Custom colour
You can change the R(Red), G(Green) and
B(Blue) values of the image.
2. Select (
) menu tab by pressing the Left/
Left Right button.
ACB
Custom Color
You can automatically adjust the brightness of the dark area, caused by
under exposure to the light source.
E
– OK button: Selects / sets up the Custom
Colour
– Up/Down button: Selects R, G, B
– Left/
Left Right button: Changes the values
Back
OK Set
Custom Color
1. Select (
) by pressing the Up/Down
button and press the OK button.
2 The [Processing!] message is displayed
and the image is saved as a new file
name
ACB
E
E
Back
OK Set
Back
OK Set
Red eye removal
Red eye effect can be removed from the captured image.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2 The [Processing!] message displays
and the image is saved as a new file
name
Red Eye Fix
E
060
Back
OK Set
E (Effect) button: Image editing
Brightness control
Saturation control
You can change the brightness of the image.
You can change the saturation of the image.
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
brightness will be displayed.
2. Change the brightness by pressing the
Left Right button.
Left/
3. Press the OK button and the image will
be saved as a new file name.
Brightness
◀▶
Move
OK Set
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
saturation will be displayed.
2. Change the saturation by pressing the
Left Right button.
Left/
3. Press the OK button and the image will
be saved as a new file name.
Saturation
◀▶
Move
OK Set
Contrast control
You can change the contrast of the image.
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
contrast will be displayed.
2. Change the contrast by pressing the
Left Right button.
Left/
3. Press the OK button and the image will
be saved as a new file name.
Contrast
◀▶
Move
OK Set
061
Setting up the play back function using the LCD monitor
Play mode functions can be changed by using the LCD monitor.
In the Play mode, pressing the MENU button displays the menu on the
LCD monitor. The menus you can set up in Play mode are as follows. To
capture an image after setting up the play menu, press the Play mode
button or Shutter button.
Menu Tab Main Menu
Sub Menu
Sub Menu
Page
Menu Tab Main Menu
Images
Show Start
SLIDE
SHOW
(
)
PLAY
BACK
(
)
062
Play / Repeat Play
–
p.63
All
Images
Date
–
p.64
Select
Off
Basic
Classic
Effect
p.64
Memories
Rhythmic
Delight
Interval
1, 3, 5, 10 sec
–
p.65
Off/Panorama/First
Music
smile/Remembrance/
–
p.65
My Music
Off
–
Voice Memo
p.66
On
–
Select
Protect
Unlock/Lock
p.66
All
Select
–
Delete
p.66
All
No/Yes
Standard
Select/All/Cancel
DPOF
Index
No / Yes
p.67~69
Size
Select/All/Cancel
No
–
Copy To
p.69
Yes
–
Card
This menu is available while the camera is connected to a PictBridge
supporting printer (direct connection to the camera, sold separately) with a
USB cable.
Size
Layout
Sub Menu
Sub Menu
One Pic
–
All Pics
–
Auto
–
PostCard
–
Card
–
4X6
–
L
–
2L
–
Letter
–
A4
–
A3
–
Auto
–
Full
–
1
–
2
–
4
–
8
–
9
–
16
–
Index
–
Page
p.80
p.81
Setting up the play back function
using the LCD monitor
Menu Tab Main Menu
Type
Quality
Date
File Name
Reset

Sub Menu
Sub Menu
Starting the slide show (
Images can be displayed continuously at pre-set intervals. You can view
the slide show by connecting the camera to an external monitor.
Page
1. Press the Play mode button and press the MENU button.
2. Press the Left/
Left Right button and select the [SLIDE SHOW] menu tab.
Auto
-
Plain
-
Start the slide show
Photo
-
The slide show can start only in the [Show Start] menu.
FastPhoto
-
Auto
-
Draft
-
Normal
-
Fine
-
Auto
-
Off
-
On
-
Auto
-
Off
-
On
-
No
-
Yes
-
)
p.81
1. Use the Up/Down button to select the
[Show Start] menu and press the Right SLIDE SHOW
Show Start
Play
button.
Images
Repeat Play
2. Select a desired sub menu by pressing
Effect
Interval
the Up/Down button.
Music
[Play]: The slide show is closed after
one cycle.
OK Set
Back
[Repeat Play]:The slide show is
repeated until cancelled.
3. Press the OK button and the slideshow will be started.
– To pause the slide show while playing it back, press the Play &
Pause (
) button again.
– Pressing the Play & Pause (
) button again will cause the slide
show to restart.
– To stop playback of the slide show, press the Play & Pause (
)
button, and then press the OK/
OK MENU button.
Menus are subject to change without prior notice.
063
Starting the slide show (
)
Selecting Images
Configure slide show effects
You can select image to view.
Unique screen effects can be used for the slide show.
1 Use the Up/Down button to select the
[Image] menu and press the Right
SLIDE SHOW
Show Start
button.
All
Images
2. Select a desired sub menu by pressing
Date▶
Effect
Select▶
Interval
the Up/Down button.
Music
[All]:
All images saved in the
Memory are played back.
OK Set
Back
[Date]: Images taken in a specified
date are played back.
[Select]: Play only the selected images.
If you press the Right button, you can select the desired
images to play back.
The selected image can be saved as [Select 1], [Select 2] and
[Select 3]. If you save the selected image with the [New Select]
command, it will be saved as [Select 1]. But when a new
image is saved again using [New Select], the former image
which had been saved as [Select 1] will be saved as [Select 2]
automatically. You can change and cancel the images which
were saved as [Select 1], [Select 2] and [Select 3].
3. Press the OK button and the settings are saved.
064
1. Select the [Effect] sub menu by pressing
the Up/Down button and press the
Right button.
2. Use the Up/Down button to select the
type of effect.
3. Press the OK button to confirm the
setting.
SLIDE SHOW
Show Start
Images
Effect
Interval
Music
Back
Off
Basic
Classic
Memories
Rhythmic
Delight
OK Set
– When the effect is selected, the background music is changed
according to the default setting of the effect.
Effect
Off, Basic
Description
No background music.
Classic
Background music is set to [Remembrance].
Memories
Background music is set to [Remembrance].
Rhythmic
Background music is set to [First Smile].
Delight
Background music is set to [Panorama].

You can change the desired music for each effect.
Starting the slide show (
)
Setting play interval
Setting Background Music
Set the slide show play interval.
Set the slide show music.
1. Select the [Interval] sub menu by
pressing the Up/Down button and press
the Right button.
2. Use the Up/Down button to select the
desired interval.
3. Press the OK button to save the
configuration.




SLIDE SHOW
Show Start
Images
Effect
Interval
Music
Back
1 sec
3 sec
5 sec
10 sec
OK Set
The loading time depends on the image size and quality.
While the slide show is playing, only the first frame of a movie
file is displayed.
While the slide show is playing, the voice recording file will not
display.
[Interval] is available when the effect is set to [Off], [Basic],
[Classic] in the slide show. It is unavailable when the effect is set to
[Memories], [Rhythmic], [Delight] in the slide show.
1. Select the [Music] sub menu by pressing
the Up/Down button and press the
SLIDE SHOW
Show Start
Right button.
Images
2. Use the Up/Down button to select the
Effect
desired Music.
Interval
Music
3. Press the OK button to save the
configuration.
Back
[Off]: Background music is not played back.
[Panorama], [First smile], [Remembrance], [My Music]:
Selected music is played back.
Off
Panorama
First Smile
Remembrance
My Music
OK Set
065
Playback (
)
Voice memo
You can add your voice to a stored still image.
100-0010
100-0010
PLAYBACK
Voice Memo
Off
Protect
On
Delete
DPOF
Copy To Card
00:00:00
Back
OK Set
<Voice memo menu>
00:00:06
SH Start
SH Stop
<Ready for recording>
<Voice is recording>
– Press the Shutter button to take a picture. The images are saved on the
memory. After saving the image, the voice is recording for 10 seconds.
– To stop the recording, press the Shutter button.
– OK button: Your changes will be
saved and the menu will
disappear.
[All]: Protect / release all saved images.
– If you protect an image, the protect
icon will be displayed on the LCD
monitor. (An unprotected image has
no indicator)
– An image in Lock mode will be
protected from the delete function or
[Delete] functions, but will NOT be
protected from the [Format] function.
100-0010
Protect All?
Unlock
Lock
Protecting images
This is used to protect specific shots from
being accidentally erased (Lock).
It also unprotects images that have been
previously protected (Unlock).
1. Press the Up/Down button and select
the [Protect] menu tab. And then press
the Right button.
2. Select a desired sub menu by pressing the
Up/Down button and press the OK button.
[Select]: Selection window for an image to
be protected / released is displayed.
– Up/Down/Left/
Left Right button: Select an
Left/
image.
– Zoom W/
W/T
/T button: Protect / release
the image.
066
OK
Deleting images
PLAYBACK
Voice Memo
Protect
Delete
DPOF
Copy To Card
Select
All
OK Set
Back
100-0010
T/W Unlock
Confirm
1
2
3
4
5
6
OK Set
This deletes images stored on the memory
card.
PLAYBACK
Voice Memo
1 Press the Up/Down button and select
Protect
the [Delete] menu tab. And then press
Delete
the Right button.
DPOF
Copy To Card
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
OK Set
Back
button.
[Select]: Selection window for an image to delete is displayed.
– Up/Down/Left/
Left Right button: Select an image.
Left/
– Zoom T button: Select the image for deletion. (V mark)
Select
All
Playback (
)
– OK button: Press the OK button to
display the confirmation
message. Select the [Yes]
menu and press the OK
button to delete marked
images.
[All]: Displays confirmation window.
Select the [Yes] menu and
press the OK button to delete
all unprotected images. If there
are no protected images, all the
images are deleted and a [No
Image!] message will display.
3. After deletion, the screen will be
changed to the play mode screen.

DPOF
100-0010
T
1
2
3
4
5
6
Select
OK
Delete
Delete All?
No
Yes
OK Confirm

DPOF(Digital Print Order Format) allows you to embed printing
information on your memory card’s MISC folder. Select the pictures to
be printed and how many prints to make.

The DPOF indicator will be displayed on the LCD monitor when an
image that has DPOF information plays back. Images can then be
printed on DPOF printers, or at an increasing number of photo labs.

This function is not available for movie clips and voice recording files.

When the wide angle image is printed as a wide angle print, 8% of the
left and right side of the image may not be printed. Check that your
printer can support the wide angle image when you print the image.
When you print the image at a photo lab, request that the image is
printed as a wide angle image. (Some photo labs may not support the
wide angle size print.)
Of all the files stored in the memory card, the unprotected files
in the DCIM subfolder will be deleted. Remember that this
will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place.
The startup image is stored in the camera’s internal memory
(i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
067
Playback (

)
Standard

This function allows you to embed printing quantity information on a
stored image.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
the Right button.
2. Press the Right button again and
[Standard] sub menu will be displayed.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[Select]: Selection window for an image
to print is displayed.
– Up/Down/Left/
Left Right button: Select
Left/
an image to print.
– Zoom W/
W/T
/T button: Select the number
of prints.
[All]: Configure number of prints for all
pictures except movie and voice
files.
– Zoom W
W//T
/T button: Select a number
of prints.
[Cancel]: Cancel the print setup.
Images (except for movie clips and voice file) are printed as index type.
Select
All
Cancel
Standard
Index
Size
OK Set
Back
100-0010
1
2
4
W
◀
3
5
0 images
6
▶
T
OK Set
W
◀
0 images
▶
T
OK Set
4. Press the OK button to confirm the setting. If an image carries DPOF
instructions, the DPOF ( ) indicator will show.
068
Index
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
Standard
the Right button.
Index
2. Press the Right button again and [Index] Size
sub menu will be displayed.
3. Select a desired sub menu by pressing
OK Set
Back
the Up/Down button.
If [No] is selected: Cancel the index
print setting.
If [Yes] is selected: The image will be printed in index format.
4. Press the OK button to confirm the setting.
No
Yes
Playback (

)
Print size
You can specify the print size when printing images stored on the memory
card. The [Size] menu is available only for DPOF 1.1 compatible printers.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
Select
Standard
the Right button.
All
Index
2. Press the Right button again and select Size
Cancel
the [Size] sub menu will be displayed.
3. Select a desired sub menu by pressing
OK Set
Back
the Up/Down button and press the OK
button.
100-0010
[Select]: Selection window to change
the printed size of the image is
1
2
3
displayed.
– Up/Down/Left/
Left Right button: Select
Left/
4
5
6
an image.
Cancel
▶ T
W ◀
– Zoom W/
W/T
/T button: Change the print
OK Set
size.
– OK button: Your changes will be
saved and the menu will disappear.
[All]: Change print size of all saved images.
Cancel
▶ T
W ◀
– Zoom W
W//T
/T button: Select a print
size.
– OK button: Confirm the changed
OK Set
setting.
[Cancel]: Cancel all of the print size settings.
 DPOF [Size] secondary menu: Cancel, 3X5, 4X6, 5X7, 8X10

Depending on the manufacturer and print model, cancelling the
printing may take a little longer for the printer to process.
Copy To Card
This enables you to copy image files, movie clips and voice recording files
to the memory card.
1. Select the [Copy To Card] menu tab by
pressing the Up/Down button. And then PLAYBACK
Voice Memo
press the Right button.
Protect
2. Select a desired sub menu by pressing
Delete
DPOF
the Up/Down button and press the OK
No
Copy To Card
button.
Yes
– [No]: Cancels [Copy to Card].
OK Set
Back
– [Yes]: All images, movie clips and
voice recording files saved in the internal memory are copied
to the memory card after the [Processing!] message is
displayed. After copying has been completed, the screen will
return to play mode.
069
Playback (



)
When this menu is selected without inserting a memory
card, the [No Card!] message will be displayed.
If there is not enough space available in the memory card
to copy saved images in the internal memory (34MB), the
[Copy To Card] command will copy only some of the images
and display [Memory Full!] message. Then the system will
return to the Playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the
memory card into the camera.
When you move the images that are stored in the internal
memory by doing [Copy To Card] to the card, the next
number of file names will be created in the card to avoid
duplication of the file name.
– When the [Reset] of the [File] setup menu is set: The
copied file names start from after the last stored file
name.
– When the [Series] of the [File] setup menu is set: The
copied file names start from after the last captured file
name. After completing [Copy To Card], the last stored
image of the last copied folder is displayed on the LCD
monitor.
Sound menu
In this mode, you can set up sound settings. You can use the setup menu in
all camera modes, except Voice recording mode.

The items indicated by
Mode
Menu
are default settings.
Sub Menu
Volume
Page
Low
Medium
High
Off
Start Sound
Sound 1
Sound 2
Sound 3
Off
Shutter
Sound
Sound 1
Sound 2
Sound 3
(SOUND)
Off
Beep Sound
Sound 1
Sound 2
Sound 3
AF Sound
Self Portrait
070
Available Mode
Off
Off
On
Off
On
p.71
Sound (
)
Volume
You can set select a volume of start up
sound, shutter sound, beep sound and AF
sound.
– [Volume] sub menu: [Off], [Low],
[Medium], [High]
Beep Sound
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
Off
Low
Medium
High
OK Set
– Start Sound: [Off], [Sound 1],
[Sound 2], [Sound 3]
– If the start up image is set to [Off], the
start up sound will not activate, even
though you may have set these to on.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
Off
Sound 1
Sound 2
Sound 3
If you set AF sound to on, AF sound will be
activated when the Shutter button is pressed
down half way so that you can be aware of
the camera operation status.
– [AF Sound] sub menu: [Off], [On]
Back
Off
Sound 1
Sound 2
Sound 3
OK Set
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
OK Set
Off
On
OK Set
Self Portrait
Shutter Sound
This feature automatically detects the
location of the face and optimises the
camera settings to ensure a great self
portrait.
You can select the shutter sound.
– Shutter Sound: [Off], [Sound 1],
[Sound 2], [Sound 3]
– [Beep Sound] sub menu: [Off],
[Sound 1, 2, 3]
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
AF Sound
Start up Sound
You can select the sound that is activated
whenever the camera is turned on.
If you set sound to on, various sounds will
be activated for camera startup, when OK
button is pressed, so that you
can be aware of the camera operation status.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
Off
Sound 1
Sound 2
Sound 3
– This feature can be set by using the [Off]
and [On] buttons.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Back
Off
On
OK Set
OK Set
071
Setup menu
In this mode, you can set up basic settings. You can use the setup menu in
all camera modes, except Voice recording mode.

The items indicated by
Sub menu
한국어
ENGLISH
DEUTSCH
DANSK
Page
FRANÇAIS
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
Date&Time
p.73
POLSKI
World Time
–
Samoa, Midway
Honolulu, Hawaii
Alaska
LA, San Francisco Denver, Phoenix
mm/dd/yy
p.73
Chicago, Dallas New York, Miami
Caracas, La Paz
Newfoundland
Buenos Aires
Mid-Atlantic
–
Off
Logo
User Image
–
Auto
Dark
Normal
Bright
Quick View
Off
0.5, 1, 3sec
LCD Save
Off
On
Format
No
Yes
p.75
Reset
No
Yes
p.75
File
Reset
Series
p.76
Off
Date
Date&Time
–
LCD
Off
dd/mm/yy
Date&Time
p.74
London
Rome, Paris, Berlin
Athens, Helsinki
Moscow
Teheran
Abu Dhabi
Kabul
Tashkent
Mumbai, New
Delhi
Kathmandu
Almaty
Yangon
Power Off
1, 3, 5, 10min
–
Bangkok,
Jakarta
Beijing,
Hong Kong
Video Out
NTSC
PAL
p.78
AF Lamp
Off
On
p.79
Seoul, Tokyo Darwin, Adelaide
072
Wellington,
Auckland
Cape Verde
Start Image
Magyar
–
yy/mm/dd
World
Time
Page
Okhotsk
SETUP1
BAHASA
SETUP1
Sub menu
Guam, Sydney
are default settings.
Menu tab Main menu
Language
Menu tab Main menu
p.73
Imprint
SETUP2

Menus are subject to change without prior notice.
p.77
p.77
SETUP1 ( )
Language
Setting up the Date / Time / Date type
There is a choice of languages that can be displayed on the LCD monitor.
Even if the battery is removed and inserted again, the language setting will
be preserved.
You can change the date and time that will
be displayed on the captured images and
set up the date type.
– Language sub menu:
English, Korean, French, German,
Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch,
Danish, Swedish, Finnish, Thai,
Bahasa (Malay/Indonesian), Arabic,
Czech, Polish, Hungarian and Turkish
– Date type: [yy/mm/dd], [Off],
[dd/mm/yy], [mm/dd/yy].
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
ENGLISH
한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
OK Set
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
London
2008 / 01 / 01
13:00
yy/mm/dd
OK Set
– World time
Available cities:
World Time
London, Cape Verde, Mid-Atlantic,
Buenos Aires, Newfoundland, Caracas,
La Paz, New York, Miami, Chicago,
Dallas, Denver, Phoenix, LA, San
Seoul, Tokyo
[GMT +09:00] 2008 / 01 / 01 13:00 PM
Francisco, Alaska, Honolulu, Hawaii,
OK Set
DST
Samoa, Midway, Wellington, Auckland,
Okhotsk, Guam, Sydney, Darwin, Adelaide, Seoul, Tokyo, Beijing,
Hong Kong, Bangkok, Jakarta, Yangon, Almaty, Kathmandu, Mumbai,
New Delhi, Tashkent, Kabul, Abu Dhabi, Teheran, Moscow, Athens,
Helsinki, Rome, Paris, Berlin
– [DST] (Daylight Saving Time): Press the Up button to set up [DST].
( ) icon will appear in front of the city
name.
073
SETUP1 ( )
Start up image
Quick view
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only with still images.
– Sub menus: [Off], [Logo], [User Image]
– Use a saved image for the start-up
image with the [Start Image] in the
[RESIZE] menu in the play mode.
– The start-up image will not be deleted
by [Delete] or [Format] menu.
– The User images will be deleted by
[Reset] menu.
– Sub menus
[Off]:
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
OFF
OK Set
Off
0.5 sec
1 sec
3 sec
OK Set
LCD save
If you set the [LCD save] to On and the camera isn’t operated during the
specified time, the LCD monitor will be turned off automatically.
You can adjust the LCD brightness.
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
074
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
LCD brightness
– Sub menus: [Auto], [Dark], [Normal],
[Bright]
The quick view function
can’t be activated.
[0.5, 1, 3 sec]: The captured image is
briefly displayed during
the selected time.
Auto
Dark
Normal
Bright
OK Set
– Sub menus
[Off]:
The LCD monitor will not be
turned off.
[On]:
If the camera isn’t operated
during the specified time (about
30 SEC.), the camera power
will be idle (Camera status
lamp:Blinking) automatically.
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Back
Off
On
OK Set
SETUP2 ( )
Formatting a memory
If you run [Format] on the memory, all files which are image, video clip,
multimedia, world tour guide and even protected images will be deleted.
So be sure to download important files to your PC before formatting the
memory.
– Sub menus
[No]: The memory will not be formatted.
[Yes]: A window for confirming the
selection displays.
SETUP2
Format
Reset
File
Imprint
Power Off
Video Out
Back
If you select the [Yes] menu, another
window for confirming the selection will
be displayed.
No
Yes
OK Set
Formatting the memory will
delete all data in the memory
(Images, MP3, PMP and Text files)
Format?
No
Yes
[Keep Folder]: Folders are remained
even though the memory
is formatted.
[Delete Folder]: All folders as well as all
files are deleted.
Formatting the memory will
delete all data in the memory
(Images, MP3, PMP and Text files)
Format?
– A [Processing!] message appears and the memory will be formatted.
If you run FORMAT in Play mode, a [No Image!] message will
appear.

Be sure to run [Format] on the following types of memory card.
– A new memory card, or an unformatted memory card
– A memory card that has a file this camera can’t recognise or one that
has been taken from another camera.
– Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras, memory
card readers, or PCs, you will get a [Card Error!] message.
Initialisation
All camera menu and function settings will be restored to their default
values. However, values for Date/Time, Language, and Video will not be
changed.
– Sub menus
[No]:
Settings will not be restored to
their defaults.
[Yes]: A window to confirm the
selection is displayed. Select
the [Yes] menu and all settings
will be restored to their
defaults.
SETUP2
Format
Reset
File
Imprint
Power Off
Video Out
Back
No
Yes
OK Set
Keep Folder
Delete Folder
075
SETUP2 ( )
File name

This function allows the user to select the
file naming format.

SETUP2
Format
Reset
File
Imprint
Power Off
Video Out
Back
File name
076

Reset
Series


OK Set
Description
Reset
After using the reset function, the next file name will be set
from 0001 even after formatting, deleting all or inserting a
new memory card.
Series
New files are named using numbers that follow the previous
sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures.
The first stored folder name is 100SSCAM, and the first file
name is SDC10001.
File names are assigned sequentially from SDC10001 
SDC10002  ~  SDC19999.
The folder number is assigned sequentially from 100 to 999 as
follows: 100SSCAM  101SSCAM  ~  999SSCAM.
Maximum numbers of files in a folder are 9999.
The files used with the memory card conform to the DCF
(Design rule for Camera File systems) format. If you change
the image file name, the image may not play back.
SETUP2 ( )
Imprinting the recording date
Auto power off
There is an option to include DATE/TIME on still images.
This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
– Sub menus
[Off]:



The DATE & TIME will
SETUP2
Format
not be imprinted on the
Reset
image file.
File
[Date]:
Only the DATE will be
Off
Imprint
Date
Power Off
imprinted on the image
Date&Time
Video Out
file.
OK Set
Back
[Date&Time]: The DATE & TIME will be
imprinted on the image file.
The Date & Time are imprinted at the bottom right side of the still image.
The imprint function is applied only to still images.
Depending on the manufacturer and print mode, the date printed on an
image may not be printed correctly.
– Sub menus
[1, 3, 5, 10 min]: The power will turn off
SETUP2
Format
automatically if not used
Reset
for the period of time
1 min
File
specified.
3 min
Imprint
5 min
Power Off
– After replacing the battery, the [Power
10 min
Video Out
Off] setting will be preserved.
OK Set
Back
– Note that the automatic [Power Off]
function will not operate if the camera is in the PC/Printer mode, slide
show, playing back a voice recording and playing back a movie clip.
077
SETUP2 ( )
Selecting video out type
The Movie output signal from the camera can be NTSC or PAL. Your
choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.

Yellow - Video
White - Sound
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor and the LCD monitor of
the camera.
SETUP2
Format
Reset
File
Imprint
Power Off
Video Out
Back
Selecting Video
out type
078
NTSC
PAL
OK Set
Description
NTSC
U.S.A, Canada, Japan, South Korea, Taiwan,
Mexico.
PAL
Australia, Austria, Belgium, China, Denmark,
Finland, Germany, U.K., Holland, Italy, Kuwait,
Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
– When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
– There will be a digital noise on the external monitor, but it is not a
malfunction.
– If the image is not in the centre of the screen, use the TV controls to
centre it.
– When the camera is connected to an external monitor, some parts of
the image may not be displayed.
– When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as
those indicated on the LCD monitor.
– When the camera is connected to an external monitor, the button sound
may not function.
PictBridge
SETUP2 ( )
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images directly.
Movie clips and voice files cannot be printed.
Auto focus lamp
You can turn on and off the Auto Focus lamp.
– Sub menus
[Off]:
The AF lamp will not light up in
low light conditions.
[On]:
The AF lamp will light up in low
light conditions.

SETUP2
Reset
File
Imprint
Power Off
Video Out
AF Lamp
Back
Off
On
OK Set
Setting up the camera for connection to the printer
1. Connect the camera and printer with
USB cable.
2. Select the [Printer] menu by pressing
Up/Down button and press the OK
button.
Select USB
Computer
Printer
OK Confirm
■ Connecting the Camera to a Printer
079
PictBridge


PictBridge: Picture Selection
If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge
compatible printer to the camera through USB cable with [Connecting
Computer] message. In this case, remove the cable and do steps 1 and 2
again.
Easy printing
When you connect the camera to printer in
the Play back mode, you can print a picture
easily.
– Pressing the Left/
Left Right button:
Selects a previous / next image.
– Pressing the Print ( ) button:
Currently displayed image will be
printed with the printer’s default setting.
100-0010
Print
OK Menu
You can select images you want to print.

Setting the Number of Copies to Print
1. Press the MENU button and the
PictBridge menu will be displayed.
PICTBRIDGE
One Pic
Images
2. Use the Up/Down button to select the
All Pics
Size
[Images] menu and press the Right
Layout
button.
Type
Quality
3. Use the Up/Down button to select a
Date
desired sub menu and press the OK
OK Set
Back
button.
– Select [One Pic] or [All Pics]. A screen where you can set the
number of copies to print will appear as shown below.
▲
▲
000
000
▼
▼
Prev ◀ ▶ Next
SH Exit
OK Set
<When [One Pic] is selected>
SH Exit
OK Set
<When [All Pics] is selected>
– Press the Up/Down button to select the number of prints.
– When [One Pic] is selected: Use the Left/
Left Right button to select
another picture. After selecting another picture, select the number of
prints for another picture.
– After setting the number of prints, press the OK button to save.
– Press the Shutter button to return to the menu without setting the
number of prints.
080
4. Press the Print (
) button and images will be printed.
PictBridge: Print Setting
PictBridge: Reset
You can select the Paper Size, Print Format, Paper Type, Print Quality, Date
Print, and File Name Print menus for printed pictures.
1. Press the MENU button and the
PictBridge menu will be displayed.
2. Use the Up/Down button to select the
desired menu, and then press the Right
button.
3. Use the Up/Down button to select the
desired sub menu value, and then press
the OK button.
Auto
Postcard
Card
4x6
L
2L
OK Set
Back
Menu
Function
Sub menu
Size
Set the size of the printing
paper.
Auto, PostCard, Card, 4X6,
L, 2L, Letter, A4, A3
Layout
Set the number of pictures
to be printed on a sheet of
paper.
Auto, Full, 1, 2, 4, 8, 9, 16,
Index
Type
Set the quality of the
printing paper.
Auto, Plain, Photo,
FastPhoto
Quality
Set the quality of the
picture to be printed.
Auto, Draft, Normal, Fine
Set whether to print the
date.
Auto, Off, On
Set whether to print the file
name.
Auto, Off, On
Date
File Name

PICTBRIDGE
Images
Size
Layout
Type
Quality
Date
Initialises user-changed configurations.
1. Use the Up/Down button to select the
[Reset] menu tab. And then press the
PICTBRIDGE
Right button.
Layout
Type
Reset?
2. Use the Up/Down button to select the
Quality
No
desired sub menu value, and then press Date
Yes
No
File Name
the OK button.
Yes
If [Yes] is selected: All print and image Reset
OK
Set
Back
settings will be reset.
If [No] is selected: Settings will not be reset.
 Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came
with your printer.
Some menu options are not supported on all printers. If not supported, the
menus are still displayed in the LCD, but are not selectable.
081
MP3 / PMP / TEXT VIEWER mode


This camera has an embedded MP3, TEXT VIEWER & Portable Media
Player program. You can take a picture, listen to the MP3 files and watch
the movie clip (Movie and Video clip) whenever you want. To use the PMP
mode, you must convert the multimedia file with the Samsung Converter.
In the TEXT VIEWER mode you can see the text on the LCD monitor with
listening MP3 music.
If the file or folder name is over 120 (Including 1 Byte/2 Byte language,
Korean, Chinese, etc.) characters, the file or folder name doesn’t appear
on the play list.
Downloading files
To use MP3, PMP and TEXT VIEWER functions, MP3, PMP (multimedia
files) and TEXT files must be saved in the internal memory or memory card
of this camera.
1. Save the desired files on your PC.
2. Connect the camera to your PC with the USB cable and turn on the
camera.
3. Open Window’s EXPLORER and search for Removable Disk.
4. Make a folder under the Removable Disk.
MP3 Mode: [MP3]
PMP Mode: [PMP]
TEXT VIEWER mode: [TEXT]
5. Select files that you want to save and copy them to the desired folder.
082
Starting the MP3 / PMP / TEXT VIEWER mode







Take care of the illegal duplication of MP3 & multimedia files. It
violates various copyright laws.
Without permission of Samsung, you cannot copy, modify
and/or distribute any part or all of MP3, PMP file provided in
the internal memory
This camera can only play back MP3 files in the MP3 mode
and SDC files (modified XviD MPEG4 video / MPEG Layer2
audio type) in the PMP mode.
If a file can not be played back on this camera, convert it into
the supported file format by using the Samsung Converter.
(p.110~111)
Up to 200 files and 100 sub folders can be saved in a folder.
It is limited to save the fi les and sub folders up to 200 in total
at the same time.
New folders can be created within the MP3, PMP and TEXT
folders. Otherwise any files in other folders that you create
cannot be played back.
Insert the memory card that holds MP3, PMP and TEXT files. As this
camera has a 34MB internal memory, you can save the files on the internal
memory too.
1. Select a desired Multi media mode. (p.25)
2. A menu will display as shown.
[Resume]:
Memorizes the latest
stopped frame.
MP3 mode: Plays back from the
beginning of the file.
PMP mode: Plays back from the
latest stopped frame.
TEXT VIEWER mode: Plays back from
the latest stopped
frame.
[Open]: The browsing menu will be
displayed to select a desired
file.
3. Select a desired file and press the OK
button. And then the file will play back.

MULTIMEDIA
MP3
In this mode you can play MP3 files.
Resume
Open
OK Confirm
While playing the multimedia mode, you can switch to the MP3,
PMP, or TEXT VIEWER mode by pressing the OK button.
083
Starting the MP3 / PMP / TEXT VIEWER mode
<MP3 mode>

01-Audio Track 01.mp3

02-Audio Track 02.mp3

Move
OK

Select

<PMP mode>

[SDC]-move sample.sdc
Move
OK
Who bent my camera?
Select

<TEXT VIEWER mode>
1. Samsung camera.txt
Thank you for buying a Samsung Camera.
1. Samsung camera.txt
This manual will guide you through using the
camera, includin capturing images, downloading

images and using the application software.
Please read this manual carefully before using your
Move
OK
Select
new camera.


084
When the [Resume] menu (p.89) of each mode are set as [Off], the
browsing menu doesn’t open. If the last played file was deleted, the
browsing menu opens though the setting is the same as above.
The order of play lists on the browsing menu and the order of files
saved in the memory are the same.
A title coded with unsupported language is displayed as “--------”.
The automatic power off function will not operate if a file is playing
back.
If there are over 100 fi les or a lot of large fi les in the sub folder,
it takes a little longer for the camera to process to the MP3 / PMP
mode.
If there is no operation during the specified time (About 30 sec.) in
the MP3 / TEXT VIEWER mode (B.G.M: Off, Auto scroll: Off), the
LCD monitor is turned off automatically and the camera status lamp
blinks. To use the camera, press any of the camera buttons except
the POWER button.
Playing back the VBR (Variable Bit Rate) file. A VBR file varies
the amount of output data in each time segment based on the
complexity of the input the data in that segment. When the VBR
encoded files are played back, the LCD will appear as shown.
– The VBR icon will be displayed instead of the Bit rate icon.
– Playing time will be displayed but not the total running time.
For about 2 seconds of the start and end frames of the PMP file, no
camera button except the POWER button can be operated.
When an MP3 file doesn’t play back correctly, download a free MP3
conversion program and convert it before using the MP3 file on the
camera.
Depending on the file type, the movie may be paused during playing
back in the PMP mode. The movie restarts automatically and it is
not a camera malfunction.
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode
The LCD monitor displays information about the MP3, multimedia and Text
file.
TEXT VIEWER mode
Battery (p.15)
MP3 mode
Battery (p.15)
Lock (p.87)
Equalizer (p.87)
Mute (p.86)
Playing time
TEXT Contents
Bit rate (p.84)
Playback mode (p.89)
Volume (p.86)
Title of file
Play & Pause /
Control button (p.86)
Current page/Whole page
Indication of present TEXT
Thank you for buying a Samsung Camera.
This manual will guide you through using the
camera, includin capturing images, downloading
images and using the application software.
Please read this manual carefully before using your
new camera.
Encoding Type
(ANSI, Uni)
Volume Indication
(p.86)
<TEXT VIEWER mode>
<MP3 mode>

Encoding Type: ANSI (American National Standards Institute) Type,
Uni (Unicode) Type
– When the ANSI encoding type is displayed:
You should set the Language of the TEXT VIEWER menu to view the
text. Set the Language menu to the same Operating System Language
that was used for the text.
– When the UNI encoding type is displayed:
The text file will be displayed with any language menu.

If the text file size is over 10MB, it may take a long time or even be
impossible to view the text file. In this case, please divide the text file.
Title of file
Time line
Status bar
PMP mode
Battery (p.15)
Lock (p.87)
Search speed
Volume (p.86)
Equalizer (p.87)
Mute (p.86)
Play & Pause/
Seeking button (p.86)
1. Samsung camera.txt
Who bent my camera?
Caption (p.110)
<PMP mode>
085
Using the camera buttons to adjust the camera
Volume button
Delete button
You can control the volume with this button.
There are 0 ~ 30 steps.
This deletes files stored on the memory.
– Mute (
): You can mute the MP3
sound with the Up button.
Play & Pause / Seeking button




086
When a file is playing back, press the Down button to pause the file.
Pressing it again will resume playback.
MP3 mode
You can search the MP3 files by pressing the Left/Right button.
PMP mode
You can search the Multimedia files by pressing the Left/
Left Right button.
You can search a desired frame of the file during play back by pressing
the Left/
Left Right button. (2X-32X)
TEXT VIEWER mode
When the text list menu is displayed: select a text file by pressing the
Up/Down button.
When the text is displayed: press the Up/Down button and previous
/ next page of the file will be displayed. Press and hold the Up/Down
button and it will skip 10 pages at a time.
1. Select a desired file to delete on the
browsing menu and press the Delete
button.
2. A message will appear as shown
[No]:
Cancels “Delete files” and the
browsing menu will appear.
[Yes]: Deletes the selected file.
Delete?
No
Yes
OK

Confirm
Before deleting files from the camera, take care to download
files you want to keep to your computer.
Using the camera buttons to adjust the camera
Hold / Equalizer button

If you press the Hold button for over 1 second, the camera buttons are
locked.
– If the camera buttons are locked, the
buttons can’t be operated while playing
back. But Power off, Video out, USB
connection and LCD on functions can
be operated.
Play mode button
While a multimedia file is playing back, you can select a desired file by
using the browsing menu.
1. While a multimedia file is playing back,
press the Play mode button.
2. A playlist that is currently playing will be
highlighted.
3. Move the cursor to a desired list by
pressing the Control button. Pressing
the OK button: the selected file is played
back. Pressing the Play mode button:
the selection will be cancelled.
01-Audio Track 01.mp3
[SDC]-move sample.sdc
Samsung camera.txt
02-Audio Track 02.mp3
– If you press the Lock button again or turn off the camera, the camera is
unlocked.

The user can select appropriate sound
with this setting.
Move
OK Select
<MP3 Mode>
Move
OK Select
<PMP Mode>
Move
OK Select
<TEXT VIEWER Mode>
– Press the E button and select either
<SRS>, <Normal>, <Live>, <Classic>,
<Jazz>, <Rock> or <Dance>.
087
Setting up the playback function using the LCD monitor
MP3 / PMP / Text Viewer mode functions can be changed by using the LCD
monitor. Press the MENU button and the menu will be displayed on the
LCD monitor.
Menu tab Main menu
Resume
Play Mode
MP3 Skin
MP3
088
Play All
Repeat One
Repeat All
Shuffle
Default 1
Default 2
User Skin 1
User Skin 2
Show Play
Play/Repeat Play
2, 3, 5 sec
Delete All
No
Yes
DRM License
Information
-
-
Seeking
Menu
Main menu
tab
Page
Off
Show Interval
Slide Show
Resume
PMP
Sub menu
On
On
Off
Normal
30 sec
1 min
3 min
5 min
10 min
Player
Display
5sec
On
Off
–
Delete All
No
Yes
p.89
Resume
p.89
Auto Scroll
p.89
Sub menu
On
Off
Off
0.8 sec
1.1 sec
1.7 sec
p.90
p.90
MP3 BGM
TEXT
VIEWER
On
한국어
FRANÇAIS
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
p.90
Delete All

No
Menus are subject to change without prior notice.
p.92
POLSKI
Magyar
p.91
p.92
DEUTSCH
BAHASA
p.91
2.3 sec
ENGLISH
DANSK
p.90
p.89
1.4 sec
2.0 sec
Off
Language
p.89
Page
Yes
p.90
Setting up the playback function using the LCD monitor
Resume
Play mode
You can set the playback type.
You can set various repeat and shuffle options. This function is adopted
only in the selected folder.
1. Press the MENU button in each mode.
2. Select a desired playing type in the [Resume] menu by pressing the
Up/Down button and pressing the OK button.
RESUME
On
Off
Move
RESUME
On
Off
MENU
Exit
<MP3 mode>
RESUME
On
Off
Move
MENU
Exit
<PMP mode>
Move
MENU
[Play All]:
Plays a single track
once.
[Repeat One]: Plays a single track
repeatedly.
[Repeat All]: Plays all tracks in the
folder repeatedly.
[Shuttle]: Randomly plays all tracks in
the folder repeatedly.
PLAY MODE
Play All
Repeat One
Repeat All
Shuttle
Move
MENU
Exit
MENU
Exit
Exit
<TEXT VIEWER mode>
[On]: When the camera is turned on / off or camera mode is changed,
this camera will memorize the last stopped frame.
MP3 mode: plays back from the beginning of the file.
PMP mode: plays back from the last stopped frame.
TEXT VIEWER mode: plays back from the last stopped frame.
[Off]: The browsing menu will be displayed to select a desired file.
Skin of MP3 player
You can set the skin of MP3 player.
[Default 1, 2]: Default skin will be set.
[User Skin 1, 2]: An image created by the
[MP3 Skin] menu (p.58)
will be set.
MP3 SKIN
Default 1
Default 2
User Skin 1
User Skin 2
Move
089
Setting up the playback function using the LCD monitor
Playing back the slide show
While the MP3 file is playing back, captured images are displayed on the
LCD monitor continuously.


[Play]: Display the images once.
[Repeat Play]: Display the images
continuously.
When the playing back is complete, the
slide show will stop.
To stop the slide show, press the E button.
SLIDE SHOW
SHOW PLAY
Play
SHOW INTERVAL ▶ Repeat Play
All files stored on the memory card will be deleted. In the MP3 mode, only
MP3 files are deleted. In the PMP mode, only multimedia files are deleted.
In the TEXT VIEWER mode, TEXT files are deleted.
DELETE ALL
No
DELETE ALL
No
DELETE ALL
No
Yes
Yes
Yes
Move
Move
MENU
Exit
You can set the slide show play interval of MP3 mode.
SLIDE SHOW
SHOW PLAY
SHOW INTERVAL

2 sec
3 sec
5 sec
Move
MENU
Exit
MENU
Exit
<MP3 mode>
[No]:
[Yes]:
Setting slide show interval
– Select an interval from 2, 3 or 5
seconds.
Delete all
Move
MENU
Exit
Cancels “Delete files”
A confirmation window will
appear. Select [Yes] and press
the OK button. All files will be
deleted.
Frame search
You can set the time of skip range when you
Left Right
search the movie by pressing the Left/
button. You can easily search for the frame
you want.
[Normal, 30 sec, 1, 3, 5, 10 min]:
This will skip a set frame whenever you
press the Left/
Left Right button.
090
Move
<PMP mode>
MENU
Exit
<TEXT VIEWER mode>
DELETE ALL
No
Delete All?
Yes
No
Yes
Move
MENU
Exit
MENU
Exit
SEEKING
Normal
30 sec
1 min
3 min
5 min
10 min
Move
Setting up the playback function using the LCD monitor
Display setting
Setting up the recording function in the MP3 mode
You can set the play back function display on the LCD.
You can take a picture and listen to the MP3
files at the same time.


[5 sec]: If there is no operation for
5 seconds, Menu bar will
PLAYER DISPLAY
disappear.
5sec
On
[On]:
Menu bar will appear on the
Off
LCD monitor.
[Off]:
Menu bar will not appear on
the LCD monitor.
MENU Exit
Move
To see the caption, insert the caption file
(.smi) by using the Samsung Converter. (p.110)
If a multimedia file has a caption, the caption will appear regardless of
display setting.
Infomation of DRM file
The information of the MP3 file with DRM
displays.
DRM License infomation
Service Started On: 2008/01/01
Service Expired On: 2008/01/01
License infomation is missing or expired.
Move

MENU
Exit
Only ‘Netsync DRM’ files downloaded from SMS(Samsung media studio)
Korean online shop can be played back.
00010
1. Press the Shutter button and the MP3
stand-by icon will appear.
2. Press the Shutter button and an image
will be captured.
E
MP3
 The camera settings are fixed to default setting of Auto mode
( , , , ). The settings can’t be changed.
 If the memory card is not inserted, this function will not operate.
Occasionally the next file will be played back when you press
the Shutter button, even though a memory card is inserted.
 To cancel the recording mode of the MP3 mode, press the
E button or do not operate any buttons for about 10 seconds.
 The equalizer setting is fixed to <Normal>.
 The MP3 sound may be a little louder in this mode.
Auto Scroll
The playing text is scrolled automatically and appears on the LCD monitor.
[Off]: The text will not be scrolled automatically.
 Press the Up/Down button and you can
use the Auto Scroll function.
[0.8, 1.1, 1.4, 1.7, 2.0, 2.3 sec]:
The text will be scrolled automatically.
The interval is marked on each menu icon.
AUTO SCROLL
Off
0.8 sec
1.1 sec
1.4 sec
1.7 sec
2.0 sec
Move
MENU
Exit
091
Setting up the playback function
using the LCD monitor
MP3 BGM Setting
Important notes
Be sure to observe the following precautions!

You can play MP3 files when you are playing the text.
[Off]:
[On]:

You cannot play the MP3 files.
When you are playing the text,
you can play the MP3 files.
The last played MP3 files will be executed.
– Areas exposed to extremes of in temperature and humidity.
– Areas exposed to dust and dirt.
– Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
– Environments where there is high magnetism or excessive vibration.
– Areas with high explosives or highly flammable materials.
MP3 BGM
Off
On
Move
MENU
Exit

Language setting
You can set up the language of OS (Operating System) to be the same as
the text file.
– If the characters of the text file aren’t
displayed correctly, open the file on
LANGUAGE
Windows 2000 or later and save it again. ENGLISH
한국어
We recommend using ‘Notepad’ and it
FRANÇAIS
has to be saved as ANSI encoding type. DEUTSCH
ESPAÑOL
– Some unique characters may not be
ITALIANO
displayed correctly on the camera.
Move
– Encode the text files as the standard
type or some characters may not be displayed correctly.
092
This unit contains precision electronic components. Do not use or store this
unit in the following locations.

Do not leave this camera in places subject to dust, chemicals (like naphthalene
and mothballs), high temperature and high humidity. Keep this camera with
silica gel in a hermetically sealed box when not planning to use the camera for
a long period of time
Sand can be particularly troublesome to cameras.
– Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
– Doing so may result in failure or may permanently render the camera
unusable.

MENU
Exit
Handling the camera
– Never drop the camera or subject it to severe shocks or vibrations.
– Protect the large size LCD monitor from an impact. When this camera
is not used, keep it in the camera case.
– Avoid obstructing the lens or the flash when you capture an image.
Important notes
– This camera is not waterproof. To avoid dangerous electrical shocks,
never hold or operate the camera with wet hands.
– If you use this camera in wet places, such as beach or pool, do not let
water or sand get inside the camera. Doing so may result in failure or
may permanently damage the unit.


– Use a soft brush (available from photo stores) to gently clean the lens and
LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning
fluid can be used. Clean the camera body with a soft cloth. Do not allow
this camera to come into contact with solvent materials such as benzol,
insecticide, thinners etc. This may damage the body shell of the camera and
also affect its performance. Rough handling can damage the LCD monitor.
Take care to avoid damage and keep the camera in its protective carry case
at all times when not in use.
Extremes in temperature may cause problems.
– If the camera is transferred from a cold to a warm and humid
environment, condensation can form on the delicate electronic circuitry.
If this occurs, turn the camera off and wait for at least 1 hour until all
moisture is dispersed. Moisture built up can also occur on the memory
card. If this happens, turn off the camera and remove the memory
card. Wait until the moisture has dispersed before replacing the card
in the camera.






Caution on Using the Lens
– If the lens is subjected to direct sunlight, it could result in the
discoloration and deterioration of the image sensor.
– Take care not to get fingerprints or foreign substances on the surface of
the lens.
If the digital camera is not used for a long period, an electric discharge can
occur. It is a good idea to remove the battery and the memory card if you do
not intend using the camera for an extended period of time.
If the camera is exposed to electronic interference, it will turn itself off to
protect the memory card.
Camera Maintenance

Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit to fire. This
is not harmful to the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected
by static electricity. In this case, disconnect and re-connect the USB cable
before trying the transfer again.
Before an important event or going on a trip, you should check the camera
condition.
– Take a picture for testing the camera condition and prepare extra battery.
– Samsung cannot be held responsible for camera malfunctions.


Do not use headphones/earphones while driving, cycling, or operating any
motorized vehicle. It may create a traffic hazard and can be illegal in some
areas.
Avoid using headphones/earphones at high volume. Hearing experts advise
against continuously loud and extended play. If you experience a ringing in
your ears, reduce volume or discontinue use.
093
Warning indicator
There are several warnings that may appear on the LCD display.
[ Card Error ! ]
• Memory card error.
 Turn off the camera power and turn it on again.
 Insert the memory card again.
 Insert and format the memory card. (p.75)
[ Card Locked! ]
• The memory card is locked.
 SD/SDHC memory card: Slide the write protect switch to the top of
the memory card.
[ No Card! ]
• A memory card is not inserted.
 Insert the memory card.
 Turn off the camera power and turn it on again.
[ No Image! ]
• There are no images stored on the memory.
 Take images.
 Insert a memory card that is holding some images.
094
[ File Error! ]
• File error.
 Delete the file.
• Memory card error.
 Contact a camera service centre.
[ Low Battery! ]
• There is low battery capacity.
 Insert fresh batteries.
[ Low Light! ]
• When taking pictures in dark places.
 Take pictures in Flash Photography mode.
[Out of Number]
• When selecting too many printing pages in the PictBridge menu.
 Select printing page within the limitation.
[DCF Full Error]
• Violation of DCF format.
 Copy the images to a PC and format the memory.
Before contacting a service centre
Please check the following.
The camera doesn’t switch on.
• There is low battery capacity.
 Insert fresh batteries. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
 Insert the battery according to the polarity marks (+, -).
The camera power ceases while in use.
• The battery is exhausted.
 Insert fresh batteries.
• The Camera is turned off automatically.
 Turn on the camera power again.
Battery power quickly drains.
• The Camera is being used in low temperatures.
 Keep the camera in warm conditions (i.e. inside a coat or jacket) and
only remove it in order to take images.
Camera does not take images when pressing the Shutter button.
• There is insufficient memory capacity.
 Delete unnecessary image files.
• The memory card has not been formatted.
 Format the memory card (p.75).
• The memory card is exhausted.
 Insert a new memory card.
• The memory card is locked.
 Refer to [Card Locked!] error message.
• The camera’s power is off.
 Turn the camera power on.
• The battery is exhausted.
 Insert fresh batteries. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
 Insert the battery according to the polarity marks (+, -).
The camera suddenly stops working while in use.
• The camera stopped due to a malfunction.
 Remove /re-insert battery and switch the camera on.
The camera buttons do not operate.
• Camera malfunction.
 Remove/re-insert battery and switch the camera on.
095
Before contacting a service centre
The images are unclear.
• A picture was taken of a subject without setting an appropriate macro mode.
 Select an appropriate macro mode to take a clear image.
• Taking a picture beyond the flash range.
 Take a picture within the flash range.
• The lens is smudged or dirty.
 Clean the lens.
The flash does not fire.
• Flash off mode has been selected.
 Dis-engage flash off mode.
• The camera mode can’t use the flash.
 Refer to the FLASH instruction. (p.33-35)
Incorrect date and time is displayed
• The date and time have been set incorrectly or the camera has adopted
the default settings.
 Reset the date and time correctly.
A card error has occurred while the memory card is in the camera.
• Incorrect memory card format.
 Re-format the memory card.
The images don’t play back.
• Incorrect file name. (Violation of DCF format)
 Do not change the image file name.
096
Colour of image is different to the original scene.
• White balance or effect setting is incorrect.
 Select appropriate White balance and effect.
Images are too bright.
• Exposure is excessive.
 Reset exposure compensation.
No image on external monitor.
• The external monitor has not been connected properly with the camera.
 Check the connection cables.
• There are incorrect files in the memory card.
 Insert a memory card that has correct files.
When using the PC’s explorer, the [Removable Disk] file does not show.
• Cable connection is incorrect.
 Check the connection.
• The camera is off.
 Turn the camera on.
• The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac
OS 10.1 ~ 10.4. Alternatively the PC does not support USB.
 Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 - 10.4 to
PC that supports USB.
• The camera driver is not installed.
 Install a [USB Storage Driver].
Specifications
Image Sensor
– Type: 1/2.5” CCD
– Effective Pixel: Approx. 8.2 Mega-pixel
– Total Pixel: Approx. 8.3 Mega-pixel
Flash
Lens
– Focal Length: Samsung lens f = 6.3 ~ 18.9mm
(35mm film equivalent: 38 ~ 114mm)
– F No.: F3.5(W) ~ F4.5(T)
– Digital Zoom:
Still Image mode: 1.0X ~ 5.0X
Play mode: 1.0X ~ 10.2X (depends on image size)
LCD Monitor
– 2.5” color TFT LCD (230,000 pixel)
Focusing
– Type: TTL auto focus, Multi-AF, Center AF, Face
Detection AF
– Range
Normal
Wide
Tele
Shutter
Exposure
80cm ~ Infinity
Macro
Super Macro
Auto Macro
5cm ~ 80cm
1cm ~ 5cm
5cm ~ Infinity
40cm ~ 80cm
-
40cm ~ Infinity
– Speed 1 ~ 1/2000 sec. (Night scene: 16 ~ 1/2000 sec.)
–
–
–
–
Control: Program AE
Metering: Multi, Spot, Center-weighted, Face Detection
Compensation: ±2EV (1/3EV steps)
ISO: Auto, 80, 100, 200, 400, 800, 1600, 3200(3M)
– Modes: Auto, Auto & Red-eye reduction, Fill-in flash,
Slow sync, Flash off, Red-eye Fix
– Range: Wide: 0.3 ~ 3.4 m, Tele: 0.5 ~ 2.7 m (ISO Auto)
– Recharging Time: Approx. under 4 seconds (new battery)
Digital Image
Stabilization
– DIS (Digital Image Stabilization)
Sharpness
– Soft+, Soft, Normal, Vivid, Vivid+
White Balance
– Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
Voice Recording
– Voice Recording (max 10 hours)
– Voice Memo in Still Image (max. 10 sec.)
Date Imprinting
– Date, Date & Time, Off (user selectable)
Shooting
– Still Image
• Mode: Auto, Program, DIS, Scene, Photo Help
Guide, Portrait
 Scene: Night, Children, Landscape, Text, Close-up,
Sunset, Dawn, Backlight, Fireworks,
Beach & Snow, Cafe, Food, Self Shot
• Shooting: Single, Continuous, AEB, Motion Capture
• Self-timer: 2 sec., 10 sec., Double(10 sec, 2 sec),
Motion Timer
097
Specifications
– Movie Clip
• With Audio or without Audio (user selectable,
recording time : memory capacity dependent, max
2hours)
• Size: 800x592, 640x480, 320x240
• Frame rate: 30 fps, 20 fps, 15 fps (20 fps for
800x592)
• Optical Zoom up to 3.0X
• Movie Editing (Embedded): Pause during recording,
Still Image Capture Time Trimming
Storage
098
– Media
• Internal memory: 34MB
• External Memory (Optional)
MMC Plus (Up to 2GB, guaranteed, 4bit 20MHz)
SD/SDHC Card (up to 4GB guaranteed)
* Internal memory capacity is subject to change
without prior notice.
– File Format
• Still Image: JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
• Movie Clip: AVI (MPEG-4)
• Audio: WAV
– Image Size and Capacity (256 MB Size)
3264x2448 3264x2176 3264x1836 2592x1944 2048x1536 1024x768
Super Fine
53
60
71
86
134
434
Fine
94
107
133
161
226
520
Normal
135
171
202
220
306
600
 These figures are measured under Samsung standard conditions and
may vary depending on shooting conditions and camera settings.
E Button
– Recording Effect:
Photo Style Selector: Normal, Vivid, Soft, Forest, Retro,
Cool, Calm, Classic
Color Effect: Normal, B&W, Sepia, Red, Blue, Green,
Negative, Custom Color
Image Adjust: Saturation, Contrast, Sharpness
– Playback Effect:
Image Edit: Resize, Rotate
Color Effect: Normal, B&W, Sepia, Red, Blue, Green,
Negative, Custom Color
Image Adjust: ACB, Red Eye Fix, Brightness, Contrast,
Saturation
Image Play
– Single image, Thumbnails, Slide show
Multi function
– MP3, PMP, Text Viewer, Portable Memory,
Voice Recorder
Specifications
Interface
Power Source

– Digital output connector: USB 2.0 High Speed 20 pin
connector
– Audio: Mono(Speaker), Stereo(Earphone)
– Video output: NTSC, PAL (user selectable)
– DC Adapter: 4.2V, 20 pin connector
– Rechargeable battery: SLB-0937, 3.7V (900mAh)
– Adaptor: SAC-47, SUC-C3
 Included battery may vary depending on sales region.
Dimensions
(WxHxD)
– 94.5X57X17.5mm (excluding protrusions)
Weight
– 139.5g (without batteries and card)
Operating
Temperature
– 0 ~ 40°C
Operating Humidity
– 5 ~ 85%
Software
– Application: Samsung Master, Samsung Converter,
Adobe Reader
MP3 Specification
Audio
–
–
–
–
Frequency: 20Hz ~ 20KHz
Earphone Port: 20Pin Port (Stereo Type)
Output: Maximum Volume Left 40mW + Right 40mW (16Ω)
Noise Ratio: 88 dB with 20 KHz LPF

File
– File Format: MP3 (MPEG-1/2/2.5 Layer 3)
– Bit Rate: 48 ~ 320kbps (Including VBR)
Sound Effect
– SRS WOW HD, Normal, Classic, Dance, Jazz, Live,
Rock
Play Mode
–
–
–
–
–
All, Repeat One, Repeat All, Random, Random Repeat
Skipping in Play, Auto Skipping
Slide Show On/Off (User Selectable)
MP3&Capturing (Capturing Mode is Auto Default, 3M)
Auto reload function (Remember both the last played
file and frame)
– Background skin of MP3 playback using user images
PMP Specification
PMP Decoder
– Movie: Modified Xvid MPEG4 (Other video files
have to use Samsung Converter S/W)
– Audio: MPEG Layer 2 (Samsung Convert S/W)
Play Mode
–
–
–
–
–
Subtitle
– Support SMI file (Using Samsung Converter S/W)
Fast Forward/Rewind(Max 32x)
Seeking in Play, Skipping in Play
Auto skipping after one file played
Auto reload function (Remember last played frame)
Support Full Screen in Converting S/W
099
Specifications

Text Specification
File
– TXT extension name, up to 99999 pages
File format
– Window: ANSI (Windows 98 or later), Unicode /
Unicode (Big-Endian) / UTF-8 (Windows 2000/XP)
– Mac: ANSI, Unicode (UTF-16)
Function
–
–
–
–
Language
– English, Korean, French, German, Spanish, Italian,
Chinese, Taiwanese, Japanese, Russian, Portuguese,
Dutch, Danish, Swedish, Finnish, Bahasa, Polish,
Hungarian, Czech, Turkish.
* Supportable language is subject to change without prior
notice.


100
Auto Scroll (0.8 sec ~ 2.3 sec)
Skipping by 1 page / 10 pages
Auto reload function (Remember last page)
Support MP3 BGM while text file is displayed.
Specifications are subject to change without prior notice.
All trademarks are the property of their respective owners.
Software notes
Please ensure that you read the instruction manual carefully before use.
– The attached software is a camera driver and image editing software
tool for Windows.
– Under no circumstances should all or part of either the software or the
user manual be reproduced.
– Copyrights for software are licensed only for use with a camera.
– In the unlikely event of a manufacturing fault, we will repair or exchange
your camera. We cannot, however, be held responsible in any way for
damage caused by inappropriate use.
– Using a Hand-made PC or a PC and OS that has not been guaranteed
by the manufacturer is not covered by the Samsung warranty.
– Before reading this manual, you should have a basic knowledge of
computers and O/S (Operating Systems).
About the software
System requirements
For Windows
PC with processor better than
Pentium II 450MHz
(Pentium 800MHz recommended)
* Samsung Converter
PC with processor better than
Pentium 500MHz (Pentium IV
recommended)
For Macintosh
After inserting the CD-ROM provided with this camera into the
CD-ROM drive, the following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
Power Mac G3 or later, or Intel
Processor

Windows 98SE / 2000 / ME /
XP/Vista
Camera driver: This enables images to transfer between the camera and
PC.
This camera uses the USB Storage Driver as the camera driver. You
can use the camera as a USB card reader. After installing the driver
and connecting this camera to the PC, you can find [Removable Disk]
in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the
Application CD. You can use the camera with Mac OS 10.1~10.4.
* Samsung Converter
Windows 2000 or later
recommended
Mac OS 10.1 ~ 10.4
Minimum 128MB RAM
(Over 512MB recommended)
Minimum 256MB RAM
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
XviD codec: This makes movie clips (MPEG-4) recorded with this
camera play back on a PC.
MPlayer (For movie clip)
To play back a movie clip recorded with this camera, you must install the
XviD codec. If a movie clip recorded with this camera does not play well,
install this codec. This software is only compatible with Windows.
1024×768 pixels, 16-bit color
display compatible monitor
(24-bit color display recommended)
Microsoft DirectX 9.0 or later

101
About the software


Setting up the application software
Samsung Converter: Multimedia converting program
To use this camera with a PC, install the application software first.
Multimedia (Movie, Video clip, etc) files can be converted into movie clips
that can be played back on this camera. This software is only compatible
with Windows.
After this has been done, the stored images in the camera can be moved to
the PC and can be edited by an image editing program.
Samsung Master: This is the all-in-one multi media software solution.

You can download, view, edit and save your digital images and movie clips
with this software. This software is only compatible with Windows.


Be sure to check the system requirements before installing the
driver.
You should allow 5 ~ 10 seconds for running the automatic
setup program according to the capability of your computer.
If the frame does not appear, run the [Windows Explorer] and
select [Installer.exe] in the CD-ROM Drive root directory.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com: English
http://www.samsungcamera.co.kr: Korean
1. The auto run frame will display.
Click the [Samsung Digital
Camera Installer] menu in the
Auto run frame.
2. Install the camera driver, DirectX, XviD, Samsung Converter, Samsung
Master and Adobe Reader by selecting a button shown on the monitor.
If a latest version of DirectX was installed on your computer, DirectX
may not be installed.
102
Setting up the application software
3. To play back the movie clip recorded with this camera on the computer,
install the XviD codec.

The XviD codec is distributed according to the GNU General Public
License and everyone can copy, distribute and change this codec. This
License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms
of this General Public License. For more information, see the License
documents (http://www.gnu.org/copyleft/gpl.html).
103
Setting up the application software
4. Install the software by instructions on the monitor.
104
Setting up the application software
5. After restarting the computer, connect the PC to the camera with the
USB cable.
6. Turn the camera power on. The [Found
New Hardware Wizard] will open and the
computer will recognise the camera.
 If your OS is Windows XP/ Vista, an
image viewer program will open. If
the download window of Samsung
Master opens after starting Samsung
Master, the camera driver was set up
successfully.




If you have installed the camera driver, the [Found New
Hardware Wizard] may not open.
On a Windows 98SE system, the Found New Hardware
Wizard dialog box opens and a window asking you to select a
driver file may appear. In this case, specify “USB Driver” in the
CD supplied.
PDF documents of user manual are included in the Software
CD-ROM supplied with this camera. Search the PDF files with
Windows explorer. Before opening the PDF files, you must
install the Adobe Reader included in the Software CD-ROM.
To install the Adobe Reader 6.0.1 correctly, Internet Explorer
5.01 or later has to be installed. Visit “www.microsoft.com” and
upgrade the Internet Explorer.
105
Starting PC mode
If you connect the USB cable to a USB port on your PC and then turn on
the power, the camera will automatically switch to “computer connection
mode”. In this mode, you can download stored images to your PC through
the USB cable.


Connecting the camera to a PC
Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with
the supplied USB cable.
3. Turn on the computer. The camera and
computer are connected.
4. External device selection menu will
display on the LCD monitor.
5. Select the [Computer] by pressing the
Up/Down button and press the OK button.
Select USB
Computer
Printer
OK Confirm


If you selected [Printer] in Step 5, when you connect the camera to your
computer, the [Connecting Printer] message will be displayed and the
connection will not be established. In this case, disconnect the USB cable,
and then follow the procedure from Step 2 and onward.
Disconnecting the camera and PC
Refer to page 108~109 (Removing the removable disk).
106
Starting PC mode

Downloading stored images
You can download the still images stored on the camera to your PC’s hard
disk and print them or use a photo editing software to edit them.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
– [Cut]: cuts a selected file.
– [Copy]: copies files.
1. Connect the camera to your PC with the
USB cable.
2. On your computer’s desktop display,
select [My computer] and double click
[Removable Disk  DCIM  100SSCAM].
The image files will then be displayed.
5. Click a folder where you want to paste the file.
6. Press the right mouse button and a
pop-up menu will open. Click [Paste].
3. Select an image and press the right
mouse button.
7. An image file is transferred from the
camera to your PC.
107
Starting PC mode
– By using [Samsung Master], you can see the stored images in the
memory directly on the PC monitor and you can copy or move the
image files.


We recommend that you should copy the images to the PC to
view them. Opening images directly from the removable disk
may be subject to unexpected disconnection.
When you upload a file that is not taken by this camera to the
Removable Disk, the [File Error!] message will be displayed on
the LCD monitor in the Play mode, and nothing is displayed in
THUMBNAIL mode.
Removing the removable disk

Windows 98SE
1. Check whether the camera and PC are transferring a file. If the camera
status lamp blinks, please wait until the lamp has finished blinking and
is constantly on.
2. Unplug the USB cable.

Windows 2000/ME/XP/Vista
(The illustrations may differ from those shown depending on the Windows
O/S.)
1. Check whether the camera and PC are transferring a file. If the camera
status lamp blinks, please wait until the lamp has finished blinking and
is constantly on.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
Double-click!
3. The [Unplug or Eject Hardware] window
will open. Select the [USB Mass Storage
Device] and click the [Stop] button.
4. The [Stop a Hardware device] window
will open. Select the [USB Mass Storage
Device] and click the [OK] button.
108
Removing the removable disk
5. A [Safe to Remove Hardware] window
will open. Click the [OK] button.
6. A [Unplug or Eject Hardware] window
will open. Click the [Close] button and
the removable disk will be removed
safely.
7. Unplug the USB cable.
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up. This camera is compatible
with MAC OS 10.1 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the
camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory
will be displayed.
2. Select an image file and copy or move it to MAC.

For Mac OS 10.1 or later: First complete uploading from
computer to camera and then remove the removable disk with
the Extract command.
109
Removing the USB Driver for
Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add/Remove Programs
Properties.
6. Uninstallation is complete.
110
Samsung Converter
Multimedia (Movie, Video clip, etc) files can be converted into movie clips
that can be played back on this camera. This software is only compatible
with Windows.

How to use the Samsung Converter
1. Double click the Samsung Converter icon on
the desktop.
2. Click the Add icon and select a file that you
want to add.
3. If you want to add a caption, check [Use
subtitles from file (*.smi)].
4. Select settings that you want and click the
[Convert] button.
– [Output format]: You can set the output format.
– [Frame size]: You can set the width and height of output movie clip.
– [Frame rate]: You can set fps (Frame Per Second).
– [Screen size]: You can set type of display.
– [Split by size]: You can set the file size of output movie clip.
5. Connect the camera to the computer with the supplied USB cable.
6. Copy the converted movie clip in the
destination folder and paste the file in the [PMP]
folder.
Samsung Converter
7. You can play back the converted movie
clip in the Play mode of the camera.
 Refer to the [Help] menu in Samsung
Converter for further information.

Who bent my camera?





Before converting a multimedia file, check whether it plays
back correctly on the Windows Media Player.
The converted files are saved as *.sdc file type that can be
played back on the Windows Media Player.
The Samsung Converter doesn’t cover every kind of codec.
If a multimedia file can’t play back on the Windows Media
Player, install a multicodec (We recommend Full version of
latest K-Lite Codec). Install the Samsung Converter again after
installing the multi-codec.
You can select destination folder of each converted file. When
the folder is not selected, the converted files are saved on a
folder where the source file is.
If you convert several files at the same time, the computer may
be running slow because of the CPU capacity. In this case,
add the files in the program one by one.






Computer specification, installed code and programs are the
main causes of converting error. When a converting error
happens, please check the following.
– Any codecs compatible with the files were not installed or
installed incorrectly. In this case, find a compatible codec
and install it. If you do not find any compatible codecs,
install a multi-codec.
– If you installed various multi-codecs on your computer, it
may cause converting problems. In this case, remove all
codecs and install a proper multi-codec.
– Install the latest Windows Media Player.
– Visit device (PC, Graphic card, Sound card) manufacturer
web-site and upgrade them with the latest version.
Some kinds of multimedia files are not converted. If the
converted media files are damaged, they may not play back on
the camera. Unusual type of files may not be converted. The
sound and scenes may not synchronise.
The expected file sizes after converting a media file may vary.
It depends on the computer system you use.
If there is no font that is compatible with the script file on your
PC, the script is shown as ‘‘.
Transferring the converted file to a removable disk is time
consuming. The duration depends on the file size.
Do not use the PMP mode while driving. It may be hazardous.
A file that does not support fast search on the Windows Media
Player can’t select converting range and divide file size.
111
Samsung Master
You can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows.
To run the Samsung Master, double click the Samsung Master icon on the
desktop.

Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display
after connecting the camera to your PC.
– To download the captured images, select
the [Select All] button.
– Select desired folder in the window and
click the [Select All] button. You can save
captured images and selected folder.
– If you click the [Cancel] button,
downloading will be cancelled.
3. Click [Next >] button.
112
4. Select a destination and make a new folder
in which to save downloaded images and
folders.
– Folder names can be made in order of
date and images will be downloaded.
– Folder name will be made as you want
and images will be downloaded.
– After selecting a folder that was made
before, images will be downloaded.
5. Click [Next >] button.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
7. Downloaded images will be displayed.
Samsung Master

Image viewer: You can view the stored images.
– Image viewer functions are listed below.
1 Menu bar: You can select menus. File, Edit, View, Tools, Change
functions, Auto download, help, etc.
2 Image selection window: You can select the desired images in this
window.
3 Media type selection menu: You can select image viewer, image edit and
movie edit functions in this menu.
4 Preview window: You can preview an image or a movie clip and check
the multi media information.
5 Zoom bar: You can change preview size.
6 Folder display window: You can see the folder location of the selected
image.
7 Image display window: Images of the selected folder are displayed.
 Refer to the [Help] menu in Samsung Master for further information.

Image edit: You can edit the still image.
– Image edit functions are listed below.
1 Edit menu: You can select the following menus.
[Tools]: You can resize or crop the selected image. See the [Help]
menu.
[Adjust]: You can modify image quality. See the [Help] menu.
[Retouch]: You can change image or insert effects on the image. See
the [Help] menu.
2 Drawing tools: Tools for editing an image.
3 Image display window: A selected image is displayed in this window.
4 Preview window: You can preview the changed image.
 A still image edited with Samsung Master can’t be played back on the
camera.
 Refer to the [Help] menu in Samsung Master for further information.
113
Samsung Master

Movie edit: You can get the still image, movie clip, narration, music files
together in a movie clip.


– Movie clip edit functions are listed below.
1 Edit menu:You can select the following menus.
[Add Media]: You can add other media elements to a movie.
[Edit Clip]: You can change the brightness, contrast, colour and
saturation.
[Effects]: You can insert an effect.
[Set Text]: You can insert texts.
[Narrate]: You can insert a narration.
[Produce]: You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv) and Windows
media (asf) file types.
114
2 Frame display window: You can insert multi media in this window.
Some movie clips that were compressed with a codec that is not
compatible with the Samsung Master cannot be played back.
Refer to the [Help] menu in Samsung Master for further information.
FAQ
Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
 Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
 Install the camera driver correctly. Turn off the camera, remove the USB
cable, plug in the USB cable again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
 Turn the camera power off and on again. Transfer the file again.
Case 4
When using the USB hub.
 There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
Case 5
Are other USB cables connected to the PC?
 The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
Case 6
When I open the Device Manager (by clicking Start  (Settings)
 Control Panel  (Performance and Maintenance)  System 
(Hardware)  Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
 Right-click on the entry with the question (?) or exclamation (!) mark
and select “Remove”. Restart the PC and connect the camera again.
For Windows 98SE PC, remove the camera driver also, restart the
PC, and then reinstall the camera driver.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the computer may
not recognise the camera as a removable disk.
 Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
Case 8
The camera is connected to the USB port located on the front of the
computer.
 When the camera is connected to the USB port located on the
front of the computer, the computer may not recognise the camera.
Connect the camera to the USB port located on the back of the
computer.
115
FAQ
[Installing codec for Mac OS]
When the movie clip doesn’t play back on the PC


1) Visit the following site for downloading the codec. (http://www.divx.
com/divx/mac)
2) Click the [Free Download] menu on the top right side of the window
then download windows appears.
3) Check the version of Mac OS and click the [Download] button to
download the file and save it on a desired folder.
4) Run the downloaded file and the codec for playing back the movie
clip will be installed.
 If the movie file is not played back on the Macintosh OS, use a
media player that supports Xvid codec (e.g: Mplayer).
When the movie clip recorded by the camera doesn’t play back on the
PC, the causes are mostly due to the codec installed on the PC.
When codec for play back the movie clip isn’t installed
 Install the codec as listed below.
[Installing codec for Windows]
 Installing the XviD codec
1) Insert the CD provided with the camera.
2) Run the windows explorer and select [CD-ROM drive:\XviD] folder
and click the XviD-1.1.2-01112006.exe file.
 The XviD codec is distributed according to the GNU General Public
License and everyone can copy, distribute and change this codec.
This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. For more information,
see the License documents (http://www.gnu.org/copyleft/gpl.html).

When the DirectX 9.0 or later is not installed
 Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file. The
DirectX will be installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx

If a PC (Windows 98SE) stops responding while the camera and PC are
connected repeatedly
 If a PC (Windows 98SE) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera.
In this case, re-start the PC.
116
FAQ

If a PC connected with the camera stops responding while Windows is
starting.
 In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to
disable and re-start the PC. The Legacy USB Support is in the BIOS
setup menu. (The BIOS setup menu differs from the PC manufacturers
and some BIOS menus don’t have Legacy USB Support) If you can’t
change the menu by yourself, contact to the PC manufacturer or BIOS
manufacturer.

If the movie clip can’t be deleted, or the removable disk can’t be
extracted or an error message displays during the file transfer.
 If you install only the Samsung Master, the problems mentioned above
occasionally happen.
– Close the Samsung Master program by clicking the [Samsung
Master] icon on the Taskbar.
– Install all the application programs included in the software CD.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should
not be disposed of with other household wastes at the end
of its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial
wastes for disposal.
Samsung Techwin cares for the environment at
all product manufacturing stages to preserve the
environment, and is taking a number of steps to
provide customers with more environment-friendly
products. The Eco mark represents Samsung
Techwin’s will to create environment-friendly
products, and indicates that the product satisfies the
EU RoHS Directive.
117
FCC notice

NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the distance between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio / TV technician for help.

CAUTION:
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
118

Declaration of Conformity
Trade Name: SAMSUNG TECHWIN
Model No.: Samsung NV4
Responsible Party: Samsung Opto-Electronics America, INC.
Address: 40 Seaview Dr. Secaucus, NJ 07094
Telephone No.: 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Download PDF